GIS Tutorial 1
Lecture 2
Map design
Outline






Choropleth maps
Colors
Vector GIS display
GIS queries
Map layers and scale thresholds
Hyperlinks and map tips
GIS TUTORIAL 1 - Basic Workbook
2
Lecture 2
CHOROPLETH MAPS
Choropleth maps



Color-coded polygon maps
Use monochromatic scales or saturated
colors
Represent numeric values (e.g. population,
number of housing units, percentage of
vacancies)
GIS TUTORIAL 1 - Basic Workbook
4
Choropleth map example
Map using color or pattern
to show different values over space (uses a color ramp)
Legend
States
Counties
POP2003
-99 - 162000
162001 - 559264
559265 - 1370157
1370158 - 3581375
3581376 - 9873548
GIS TUTORIAL 1 - Basic Workbook
5
Choropleth map example

Percentage of vacant housing units by
county
GIS TUTORIAL 1 - Basic Workbook
6
Classifying data
Process of placing data into groups (classes or
bins) that have a similar characteristic or value

Break points
 Breaks the total attribute
range up into these intervals
 Keep the number of intervals
as small as possible (5-7)
 Use a mathematical progression
or formula instead of picking
arbitrary values
GIS TUTORIAL 1 - Basic Workbook
Break
points
7
How to classify ranges in ArcMap
GIS TUTORIAL 1 - Basic Workbook
8
Classifications

Natural breaks (Jenks)
 Picks breaks that best group similar values
together naturally and maximizes the differences
between classes
 Generally, there are relatively large jumps in
value between classes and classes are uneven
 Based on a subjective decision and is the best
choice for combining similar values
 Class ranges specific to the individual dataset,
thus it is difficult to compare a map with another
map
GIS TUTORIAL 1 - Basic Workbook
9
Classifications

Quantiles
 Places the same number of data values in each
class
 Will never have empty classes or classes with
too few or too many values
 Attractive in that this method produces distinct
map patterns
 Analysts use because they provide information
about the shape of the distribution.
 Example: 0–25%, 25%–50%, 50%–75%,75%–
100%
GIS TUTORIAL 1 - Basic Workbook
10
Classifications

Equal intervals
 Divides a set of attribute values into groups that
contain an equal range of values
 Best communicates with continuous set of data
 Easy to accomplish and read
 Not good for clustered data

Produces map with many features in one or two classes
and some classes with no features
GIS TUTORIAL 1 - Basic Workbook
11
Classifications
Use mathematical formulas when possible.

Exponential scales
 Popular method of increasing intervals
 Use break values that are powers such as 2n or
3n
 Generally start out with zero as an additional
class if that value appears in your data
 Example: 0, 1–2, 3–4, 5–8, 9–16, and so forth
GIS TUTORIAL 1 - Basic Workbook
12
Classifications
Use mathematical formulas when possible

Increasing interval widths
 Long-tailed distributions
 Data distributions deviate from a bell-shaped
curve and most often are skewed to the right
with the right tail elongated
 Example: Keep doubling the interval of each
category, 0–5, 5–15, 15–35, 35–75 have interval
widths of 5, 10, 20, and 40.
GIS TUTORIAL 1 - Basic Workbook
13
Original map (natural breaks)
U.S. population by state, 2000
GIS TUTORIAL 1 - Basic Workbook
14
Equal interval scale
Not good because too many values fall into low classes
GIS TUTORIAL 1 - Basic Workbook
15
Quantile scale
Shows that an increasing width (geometric) scale is needed
GIS TUTORIAL 1 - Basic Workbook
16
Custom geometric scale

Experiment with exponential scales with powers
of 2 or 3.
GIS TUTORIAL 1 - Basic Workbook
17
Normalizing data
Divides one numeric attribute by another in order to
minimize differences in values based on the size of
areas or number of features in each area
Examples:
 Dividing the number of vacant housing units by the
total number of housing units yields the percentage
of vacant units
 Dividing the population by area of the feature yields
a population density
GIS TUTORIAL 1 - Basic Workbook
18
Nonnormalized data
Number of vacant housing units by state, 2000
GIS TUTORIAL 1 - Basic Workbook
19
Normalized data
Percentage vacant housing units by state, 2000
GIS TUTORIAL 1 - Basic Workbook
20
Nonnormalized data
California population by county, 2007
GIS TUTORIAL 1 - Basic Workbook
21
Normalized data
California population density, 2007
GIS TUTORIAL 1 - Basic Workbook
22
Normalize Data to conform to a standard
•Right-click the layer you want to draw showing a quantitative value in the table of contents and click Properties.
•Click the Symbology tab.
•Click Quantities and click graduated colors.
•Click the Value drop-down arrow and click the field that contains the quantitative value you want to map.
•Click the Normalization drop-down arrow and click a field to normalize the data.
•ArcMap divides this field into the Value to create a ratio.
GIS TUTORIAL 1 - Basic Workbook
23
To Create More Meaningful Text in Legends
1. Left click to highlight the layer in the TOC
2. Type the desired text
3. When the legend is added on the layout, the new text will display
TOC
TOC
Layout View
GIS TUTORIAL 1 - Basic Workbook
24
OR- To Create More Meaningful Text in Legends
• 1 In Layout View, right click the legend box
• 2 Select Convert To Graphics
• 3 Right click the Graphics text box legend, select Ungroup
• 4 Double left click text, then type desired text
1
2
3
4
Layout View
GIS TUTORIAL 1 - Basic Workbook
25
To sort value ranges in descending order:
•Right-click the layer you want to draw showing a quantitative value in the table of contents and click Properties.
•Click the Symbology tab.
•Click Quantities and click graduated colors.
•Click the Value drop-down arrow and click the field
•that contains the quantitative value you want to map.
•Click the Range tab and click Reverse Sorting.
•ArcMap places the ranges in descending order.
•Select OK
To reverse the symbol color:
•Select the symbol tab
•Select Flip Symbols
•Select OK
Symbol- Flip Symbols
Result
Range- Reverse Sorting
GIS TUTORIAL 1 - Basic Workbook
26
Other Types of Thematic Maps: Graduated Symbols
Percent Poverty By County, 1990
Percent
5.9 - 13.3
14.2 - 19.3
20.0 - 25.8
28.1 - 37.3
GIS TUTORIAL 1 - Basic Workbook
27
Other Types of Thematic Maps: Proportional Symbols
Percent Poverty By County, 1990
Percent
20
GIS TUTORIAL 1 - Basic Workbook
28
Other Types of Thematic Maps: Dot Density
Percent Poverty By County, 1990
1 Dot = 1 Percent
GIS TUTORIAL 1 - Basic Workbook
29
Other Types of Thematic Maps: Unique Values
GIS TUTORIAL 1 - Basic Workbook
30
Lecture 2
COLORS
GIS TUTORIAL 1 - Basic Workbook
31
Color overview

Hue is the basic color

Value is the amount of white or black in the color

Saturation refers to a color scale that ranges
from a pure hue to gray or black
32
GIS TUTORIAL 1 - Basic Workbook
Color wheel
Device that provides guidance in choosing colors



Use opposite colors to
differentiate graphic features
Three or four colors equally
spaced around the wheel are
good choices for differentiating
graphic features
Use adjacent colors for
harmony, such as blue, blue
green, and green or red, red
orange, and orange
33
GIS TUTORIAL 1 - Basic Workbook
Light vs. dark colors



Light colors associated with low values
Dark colors associated with high values
Human eye is drawn to dark colors
GIS TUTORIAL 1 - Basic Workbook
34
Contrast
The greater the difference in value between an
object and its background, the greater the
contrast
GIS TUTORIAL 1 - Basic Workbook
35
Monochromatic color scale




Series of colors of the same hue with color
value varied from low to high
Common for choropleth maps
The darker the color in a monochromatic
scale, the more important the graphic feature
Use more light shades of a hue than dark
shades in monochromatic scales
 The human eye can better differentiate among
light shades than dark shades
GIS TUTORIAL 1 - Basic Workbook
36
Monochromatic map
Values too similar
GIS TUTORIAL 1 - Basic Workbook
37
Monochromatic map
A better map, more contrast
GIS TUTORIAL 1 - Basic Workbook
38
Dichromatic color scale



An exception to the typical monochromatic
scale used in most choropleth maps
Two monochromatic scales joined together
with a low color value in the center, with color
value increasing toward both ends
Uses a natural middle point of a scale, such as
0 for some quantities (profits and losses,
increases and decreases)
39
GIS TUTORIAL 1 - Basic Workbook
Dichromatic map
Symmetric break points centered on 0 make it easy to
interpret the map
40
GIS TUTORIAL 1 - Basic Workbook
Color tips

Colors have meaning
 Political and cultural

Cool colors
 Calming
 Appear smaller
 Recede

Warm colors
 Exciting
 Overpower cool colors
GIS TUTORIAL 1 - Basic Workbook
41
Color tips


Do not use all of the colors of the color
spectrum, as seen from a prism or in a
rainbow, for color coding
If you have relatively few points in a point
layer, or if a user will normally be zoomed in
to view parts of your map, use size instead
of color value to symbolize a numeric
attribute
42
GIS TUTORIAL 1 - Basic Workbook
Color tips
If you have many polygons to symbolize, it is better to
use polygon centroid points with color rather than
polygon choropleth maps.
43
GIS TUTORIAL 1 - Basic Workbook
Changing colors in ArcMap

Choose color, more colors…
GIS TUTORIAL 1 - Basic Workbook
44
Learn more about GIS colors


Website
 http://colorbrewer2.org/
Books
 Brewer, Cynthia A. 2008. Designed Maps: A
Sourcebook for GIS Users. Redlands: ESRI
Press
 Brewer, Cynthia A. 2005. Designing Better Maps:
A Guide for GIS Users. Redlands: ESRI Press
GIS TUTORIAL 1 - Basic Workbook
45
Lecture 2
VECTOR GIS DISPLAY
GIS TUTORIAL 1 - Basic Workbook
46
Points, lines, polygons

Point
 x,y coordinates

Line
 starting and ending point and may have
additional shape vertices (points)

Polygon
 three or more lines joined to form a closed area
GIS TUTORIAL 1 - Basic Workbook
47
Feature attribute tables


Store characteristics for vector features
Layers can be displayed using attributes
GIS TUTORIAL 1 - Basic Workbook
48
Displaying points


Single symbols
All CAD calls
GIS TUTORIAL 1 - Basic Workbook
49
Displaying points


Same features, different points
Based on attributes
GIS TUTORIAL 1 - Basic Workbook
50
Displaying points


Industry specific (e.g. crime analysis)
Good for large scale (zoomed in) maps
GIS TUTORIAL 1 - Basic Workbook
51
Displaying points

Industry specific (e.g. schools)
 Not good for multiple features at smaller scales
 Simple points better for analysis
GIS TUTORIAL 1 - Basic Workbook
52
Displaying points

Quantities
 Use exaggerated sizes
GIS TUTORIAL 1 - Basic Workbook
53
Displaying lines
For analytical maps, most lines are ground
features and should be light shades (e.g. gray
or light brown)
GIS TUTORIAL 1 - Basic Workbook
54
Displaying lines
Consider using dashed lines to signify less
important line features and solid lines for the
important ones
GIS TUTORIAL 1 - Basic Workbook
55
Displaying polygons
Consider using no outline or dark gray for
boundaries of most polygons
 Dark gray makes the polygons prominent
enough, but not so much that they compete for
attention with more important graphic features
GIS TUTORIAL 1 - Basic Workbook
56
Displaying polygons
Consider using texture for black and white
copies
GIS TUTORIAL 1 - Basic Workbook
57
Graphic hierarchy


Assign bright colors (red, orange, yellow, green,
blue) to important graphic elements
Features are known as figure
All features in figure
GIS TUTORIAL 1 - Basic Workbook
58
Graphic hierarchy


Assign drab colors to the graphic elements that
provide orientation or context, especially shades
of gray
Features known as ground
Circles in figure, squares and lines in
ground
GIS TUTORIAL 1 - Basic Workbook
59
59
Graphic hierarchy


Place a strong boundary, such as a heavy black
line, around polygons that are important to
increase figure
Use a coarse, heavy cross-hatch or pattern to
make some polygons important, placing them in
figure
GIS TUTORIAL 1 - Basic Workbook
60
Graphic hierarchy example
GIS TUTORIAL 1 - Basic Workbook
61
Lecture 2
GIS QUERIES
GIS TUTORIAL 1 - Basic Workbook
62
GIS queries



Powerful relationship between data table
and vector-based graphics—unique to GIS
Records from a feature attribute table are
selected by using query criteria
Query will automatically highlight the
corresponding graphic features
63
GIS TUTORIAL 1 - Basic Workbook
Simple attribute queries

Simple query criterion
 <data attribute>< logical operator><value>
 NatureCode ='DRUGS'
 DATE >= '20040701'

% wild card
 % symbol stands for zero, one, or more characters
of any kind
 NAME like ' BUR%'
 Selects any crime with names starting with the
letters BUR, including burglaries (BUR), business
burglaries(BURBUS), and residential burglaries
(BURRES)
GIS TUTORIAL 1 - Basic Workbook
64
Simple attribute queries
GIS TUTORIAL 1 - Basic Workbook
65
Compound attribute queries

Compound query criteria
 Combine two or more simple queries with the
logical connectives AND or OR
 "NATURE_COD" = 'DRUGS' AND "DATE" >
20040801
 Selects records that satisfy both criteria
simultaneously
 Result are drug crimes that were committed after
August 1, 2004
66
GIS TUTORIAL 1 - Basic Workbook
Compound attribute queries
GIS TUTORIAL 1 - Basic Workbook
67
Lecture 2
LAYER GROUPS, SCALE
THRESHOLDS
Layer groups


Organizes layers
Groups and names logically
GIS TUTORIAL 1 - Basic Workbook
69
Map Layer file (.lyr)
Display certain characteristics of a dataset
Show street subset that is classified by small, medium, or large
Dataset properties such as color & line width are saved
and applied to similar datasets.
To create layer file
-right click layer
-Select Save as
layer file
-type layer filename
GIS TUTORIAL 1 - Basic Workbook
70
Group Layer (.lyr)
To create a Group Layer:
-Right click the data frame text and
Select New Group Layer
-Select the New Group layer &
Add Data (i.e.rail & interstate)
-Right click the New Group layer text
and select Save as Layer File
-In the save layer pop up window,
type the name of the new layer file
i.e. Transportation Group.lyr
GIS TUTORIAL 1 - Basic Workbook
71
Minimum scale threshold

When zoomed out beyond this scale,
features will not be visible
 Tracts not visible when zoomed to the USA
GIS TUTORIAL 1 - Basic Workbook
72
Minimum scale threshold
 Tracts displayed when zoomed in
GIS TUTORIAL 1 - Basic Workbook
73
Maximum scale threshold

When zoomed in, features will not be visible
 State population will disappear when zoomed in
to a state
GIS TUTORIAL 1 - Basic Workbook
74
Lecture 2
HYPERLINKS AND MAP TIPS
Hyperlinks

Links images, documents, Web pages, etc.
to features on a map
GIS TUTORIAL 1 - Basic Workbook
76
Map tips


Provide an additional way to find information
about map features
Pop up as you hover the mouse pointer over
a feature
GIS TUTORIAL 1 - Basic Workbook
77
Summary






Choropleth maps
Colors
Vector GIS display
GIS queries
Map layers and scale thresholds
Hyperlinks and Map tips
GIS TUTORIAL 1 - Basic Workbook
78