ZVM Solo
EMIT ZVM Solo
the most complete monitoring solution on the market
Made in
United States of America
emit.descoindustries.com
ZVM Solo
Benefits of Continuous Monitoring
 Eliminate periodic testing and
logging
 Instant fault detection
 Detects intermittent, low and high
resistance faults
 Provides supervisors with visual
indication of operator grounding
Made in
United States of America
emit.descoindustries.com
ZVM Solo
Dual-Wire / Dual-Polarity Technology
 Dual-Wire (resistive loop)
 Redundant grounding (still grounded if
one wire breaks)
 Dual polarity technology places
positive voltage on one line and
negative voltage on the other resulting
in near zero voltage at the operator
Made in
United States of America
emit.descoindustries.com
ZVM Solo
Superior Features
 True continuous monitoring
 Zero volt technology
 Charge detection circuitry
 Tool / accessory monitoring
 Low profile stainless steel enclosure
 RS-485 communication for use with EMIT SIM Software
Made in
United States of America
emit.descoindustries.com
ZVM Solo
User Adjustable Features
 Operator test voltages: 50mV or 1.25V
 Worksurface limit: 3 ohm or 3 Megohms
 Operator charge detect: ±1.25V or ±2.5V
Made in
United States of America
emit.descoindustries.com
ZVM Solo
True Continuous Monitoring
 The ZVM Solo offers true continuous monitoring; pulsed
monitors do not
 Fastest response time on the market
Pulsed technology is off 90% of the time
and misses intermittent connections
ON
ZVM Solo
Pulsed Monitor
10
9.
7
9.
4
9.
1
8.
8
8.
5
8.
2
7.
9
7.
6
7
7.
3
6.
7
6.
4
6.
1
5.
8
5.
5
5.
2
4.
9
4.
6
4
4.
3
3.
7
3.
4
3.
1
2.
8
2.
5
2.
2
1.
9
1.
6
1
1.
3
0.
7
0.
4
OFF
0.
1
Pulsed only monitors 10% of time
Made in
United States of America
emit.descoindustries.com
ZVM Solo
Zero Volt Technology
S u p p ly V oltag e V s O p erator V oltag e
1.5
1
→
0.5
0
-0.5
V+ supply
V operator
V- supply
-1
-1.5
Made in
United States of America
emit.descoindustries.com
ZVM Solo
Operator Charge Detection
 Detects operator voltage charge > ±2.5VDC
> ±2.5V
Made in
United States of America
emit.descoindustries.com
ZVM Solo
Tool Ground Circuit
 Monitor just about any tool or accessory ground connection
 Alarms at >7 ohms
Made in
United States of America
emit.descoindustries.com
ZVM Solo
Additional Features
 Low profile for convenient mounting under bench tops
 Heavy duty hook and loop fasteners included for mounting
 Optional 50578 stainless steel mounting bracket available
Made in
United States of America
emit.descoindustries.com
EMIT SIM
What is EMIT SIM?
 EMIT SIM (Smart Ionization & Monitoring) is software designed to monitor and record the
activity of EMIT’s line of Smart Products
 This list of products includes:
 Zero Volt Ionizer
 Zero Volt Monitor
 Zero Volt Monitor Solo
 Dual Programmable Monitor
 Ultra Low Voltage Monitor
(Bench Top and Overhead)
(Dual Operator and Workstation)
(Single Operator and Workstation)
 EMIT SIM uses serial number tracking to manage re-calibration schedules for each device
 All monitoring is done via a 2 wire serial RS-485 daisy-chained bus. Total cable length of
each loop must be less than 1,200 meters (~4,000 feet).
 Supported Operating Systems: Windows XP, Windows Vista, Windows 7
(32-bit and 64-bit)
Made in
United States of America
emit.descoindustries.com
EMIT SIM
Why EMIT SIM?
 Unsupervised Reliability
 Ionizers and monitors sometimes have alarms which may go unnoticed by the line of


workers
EMIT SIM will record and display failures to notify supervisors or engineers when a
device needs attention
Eliminates the need to rely on people to physically check the devices every day
 Quickly Identify Failure Types
 All alarms and exceptions are automatically recorded
 Use the logs stored in EMIT SIM to identify any exceptional events that occurred during
the assembly of a failed product
 Manage Calibration and Maintenance Schedules
 Customize your maintenance schedule to automatically display notification when any
one group of devices need calibration or maintenance
“Compliance verification records shall be established and maintained to provide evidence of conformity to
the technical requirements.” (ANSI/ESD S20.20-2007 section 7.3)
Made in
United States of America
emit.descoindustries.com
EMIT SIM
Hardware Setup – ZVM Solos Only
Made in
United States of America
emit.descoindustries.com
EMIT SIM
Hardware Setup – Monitors and Ionizers
Made in
United States of America
emit.descoindustries.com
EMIT
Need More Information?
Contact EMIT Customer Service to schedule a
demonstration from your local sales representative.
30-day demo programs are available.
(909) 664-9980
Service@DescoEMIT.com
emit.descoindustries.com
Made in
United States of America
emit.descoindustries.com