KX-NS1000 Version 2
Database Converter
(NS1000 Off line mode V2.0)
The database converter is a part of application in NS off-line programming software.
Introduction
This document explains ‘Database Converter’, and is composed of the
following chapters.
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Overview
Specifications
Data Conversion
Appendix
For further information about feature implementation and specifications,
refer to the following manuals.
“Installation Manual“ / ”Feature Guide“/ “Getting Started”
• Microsoft, Internet Explorer, Outlook, Windows, Windows XP, Windows Vista, and Windows 7 are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
• Mozilla and Firefox are registered trademarks of the Mozilla Foundation.
• All other trademarks identified here in are the property of their respective owners.
• Microsoft product screen shots reprinted with permission from Microsoft Corporation.
Table of Contents
Chapter
1) Overview
1-1 Converter Overview
1-2 Support Features
2) Specifications
2-1
2-2
2-3
2-4
2-5
2-6
Target of PBX
Conversion item of programming
Available Converting Patterns
Unavailable Converting Patterns
Table of item not converted
Unavailable Cards
3) Data Conversion
3-1 Procedure of Conversion
3-2 Suffix Code
3-3 Result of Converting
4) Appendix
Chapter 1
Overview
1-1. Converter Overview
The NS off-line programming tool provides legacy database converter feature.
It can convert the system data of NCP/TDE/TDA series PBX into the data for NS1000.
UPCMC
NS-Off line tool (V2.0)
Menu [PBX Replacement]
Menu [Convert]
TDE100/200
Conversion
Result
Conversion
DMSYS
DCSYS report
TDE600
DGSYS
NCP500/1000
TDA100/200 TDA600
DSYS
DLSYS
DBSYS
Not support to convert via
Web-MC (On-line).
NS1000
TDE/NCP
TDA
NS1000 is overwritten
in new DCSYS.
The data of TDA should convert into the data of TDE in UPCMC.
The data file name of TDA/TDE/NCP are different depending on each device.
Activation key is not transferred at the converting database.
1-2. Support Features (1)
(1) Platform Replacement (TDE/NCP --> NS1000)
Legacy database converter can convert to NS1000 setting data from Legacy PBX
setting data.
The target data of conversion is the data of only IP Trunk and IP terminal.
(The data of the physical IP-GW card is not converted.)
IP Trunk
IP Trunk
V-IPGW16,V-SIPGW16
V-IPGW16,V-SIPGW16
IP-GW4,16 It’s not supported.
NS1000
TDA/TDE/NCP
TDA/TDE/NCP
not used
IP terminal
IP terminal
V-IPEXT32
V-SIPEXT32
V-IPCS4
IP-EXT16 (Physical card)
V-IPEXT32
V-SIPEXT32
V-IPCS4
The data of the physical IP-EXT card is converted to V-IPEXT card.
OPB card and any card on OPB card are not supported to convert.
1-2. Support Features (2)
(2) Platform as Legacy Gateway data (TDE/NCP - -> NS1000 + Legacy GW)
Legacy database converter can be conversion to the setting data for using
existing PBX as legacy gateway.
(The data related to IP is converted like case “(1) Platform Replacement”.)
IP Trunk
IP Trunk
V-IPGW16,
V-SIPGW16
V-IPGW16,V-SIPGW16
NS1000
IP-GW4,16 It’s not supported.
Legacy Trunk
STACK-M
IP Trunk
TDA/TDE/NCP
Legacy
Trunk
STACK-S
DPT/SLT
DPT/SLT
IP terminal
V-IPEXT32
V-SIPEXT32
V-IPCS4
IP-EXT16 (Physical card)
PS can be used without
re-registration.
IP terminal
conversion
V-IPEXT32
V-SIPEXT32
V-IPCS4
Chapter 2
Specifications
2-1. Target series of PBX
The following table shows target series of PBX and the version number that can be
converted. The file name of TDA/TDE/NCP are different depending on each device.
Series of PBX
Version number
Data File name
NCP500/1000
Ver. 6
DBSYS
TDA100/200
Ver. 5
DSYS
TDE100/200
Ver. 6
DMSYS
TDA600/620
Ver. 5
DLSYS
TDE600/620
Ver. 6
DGSYS
[Note]
The TDA database file has to be converted into DGSYS or DMSYS of TDE by using
data replacement application on PCMC before using the legacy database convertor.
New program items added in NS1000 are filled by the default value.
All data of numbering plan are switched to originated (New DCSYS) data since
the default values are different between NS1000 and other PBXs.
New setting of dial plan added in NS1000, which is not in legacy PBXs, are filled
with BLANK.
2-2. Conversion of programming item (1)
Mode : Platform Replacement (TDE/NCP ->NS1000)
The following table shows which programming items can be converted.
Programming items
Originated
PBX
Extension *1,*2
Trunk
*3,*4
Numbering
Plan
COS
DDI/
DID
Group
SSD
PSD
CTI
NCP500/1000
TDE100/200/600
IP Extension
PS/IP-CS
IP Trunk
Yes
Yes
Yes
Yes
Yes
Yes
Yes
TDA100/200/600
IP Extension of
IP-EXT card
-
Yes
Yes
Yes
Yes
Yes
Yes
Yes
*1: Include Extension number, Extension name, FF key data
*2: Only support IP Extension and PS/IP-PS
*3: Include Trunk number
*4: IP trunk of IP-GW card is not supported.
2-2. Conversion of programming item (2)
Mode : Platform As Legacy GW Data (TDE/NCP ->NS1000+Legacy GW)
The following table shows which programming items can be converted.
Programming Items
Originated
PBX
NCP500/1000
TDE100/200
TDA100/200
TDE600
TDA600
(Basic shelf)
TDE600/620
TDA600/620
(Basic shelf &
Expansion shelf 1)
Convert to
Extension
*1
Trunk
*2
Numbering
Plan
COS
DDI/
DID
Group
SSD
PSD
CTI
Legacy
GW1
All Ext.
All
Trunk
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Legacy
GW1
All Ext..
All
Trunk
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Legacy
GW1+GW2
+GW3+GW4
All Ext.
All
Trunk
Yes
Yes
Yes
Yes
Yes
Yes
Yes
*1: Include Extension number, Extension name, FF key data
*2: Include Trunk number
2-3. Available Converting Patterns (1)
Pattern 1 (Replacement : Only IP)
TDA/TDE/NCP
NS1000
Pattern 2 (Included Legacy gateway)
TDA/TDE/NCP
Port of Gateway1
Port of Gateway2
The existing PBX as Legacy gateway
should be connected with Legacy GW1.
NS1000
Legacy
Gateway1
Pattern 3 (Multi cabinets)
NS1000
The data of TDE/TDA multi cabinets
can be converted to NS1000 data.
Shelf 2
Shelf 1
TDE620
TDE600
Shelf 1
TDE
600
Shelf 2
TDE
620
Legacy
Legacy
Gateway1 Gateway2
2-3. Available Converting Patterns (2)
Pattern 4 (4 cabinets)
TDA600/620 or TDE600/620
Shelf 4
One Look Networking
Master
Slave
NS1000
NS1000
Legacy
Gateway1
Legacy
Gateway2
Legacy
Gateway2
Legacy
Gateway1
Shelf 3
Shelf 2
Shelf 1
Shelf 1
Shelf 2
Shelf 3
Shelf 4
The shelf location is fixed.
This tool supports the data conversion to Legacy gateway which is connected with the
master NS1000.
2-4. Unavailable Converting Patterns (1)
Pattern 1 (Multi system)
TDA/TDE/NCP
DCSYS
NS1000
DBSYS
Legacy Gateway1 Legacy Gateway2
DBSYS
One Look Networking
Master
Slave
DCSYS
Legacy Gateway1
Legacy Gateway1
This tool doesn't support data conversion of the multi PBX system.
(This tool can not merge multi PBX system data.)
2-4. Unavailable Converting Patterns (2)
Pattern 2 (Slave system)
TDA/TDE/NCP
DBSYS
One Look Networking
Master
Slave
DCSYS
Legacy Gateway1
This tool doesn't support the data conversion connected with the slave NS1000.
Pattern 3 (Port of Legacy Gateway2)
TDA/TDE/NCP
DBSYS
DCSYS
Legacy Gateway2
This tool doesn't support the data conversion connected with the Legacy GW2.
2-5. Table of item not converted (1)
The converted value is indicated in right column.
Function
Value (after the converted)
Time Service Switching Mode
The default setting
Time Setting （Time Table)
Clear
Timed Reminder
Clear
Extension Dial Lock
Unlock
Remote Extension Dial Lock
Unlock
Call Charge data
Clear
Not Ready (Manual Wrap-up) Mode On / Off
Off
LCS On/Off
Off
Hospitality Features
（Check In/Out Not Ready/Cleaned Up）
Clear
Auto Answer
The default setting
Absent Message
The default setting
Last Number Redial
Clear
Changing the Log-in/Log-out Status of Extensions Clear
2-5. Table of item not converted (2)
Function
Value (after the converted)
Message Waiting
Clear
Incoming Call Log
Clear
Call Charge
Clear
Outgoing Call Log
Clear
TAM Log
Clear
OGM
Clear
Call Forwarding (FWD)/Do Not Disturb (DND) Settings
Off
Traffic data
Clear
Verification Code PIN Lock state
Unlock
Verification Code PIN Lock counter
Clear
Password Lock counter for Remote System
Programming
Clear
Major/Minor alarms
Clear
Error Log
Clear
Wake-up Call
Clear
2-6. Unavailable Cards
Following components can not be used with Legacy-GW. These data is deleted.
Symbol
Model
Description
RMT
TDA0196
Analogue Modem for Remote Maintenance
MEC
TDA0105/TDE0105
Memory Expansion Card
DSP4/16/64
NCP1104/TDE0110/TDE0111
VoIP channel card 4ch/16ch/64ch
CTI-LINK
TDA0410
CTI Link Card
IP-EXT16
TDA0470
16-Channnel VoIP Extension Card *1
IP GW4/IP-GW4E
TDA0480/TDA0484
4-Channnel VoIP Gateway Card
IP-GW16
TDA0490
16-Channnel VoIP Gateway Card
MSG4
TDA0191
4-Channel Message Card
ESVM2/4
TDA0192/TDA0194
2/4-Channel Simplified Voice Message Card
CLCOT8 *
TDA1180
8-Port Analogue Trunk Base Card w/ Caller ID
CLCOT8E *
TDA1186
8-Port Analogue Trunk Daughter Card w/ Caller
ID
MCSLC24
TDA1178
24-Port Single Line Telephone Card
MCSLC16
TDA1176
16-Port Single Line Telephone Card
*1: The data of IP extension is taken over to a virtual extension card.
Regarding the deleted data is displayed on the results report.
Chapter 3
Data Conversion
3-1. Procedure of Conversion (1)
After these selection, some of mandatory system setting need to be programmed,
then DCSYS file for NS1000 is created.
NS-Off line tool (V2.0)
Menu [Convert]
(1) Click. The following
screen is opened.
(2) Converter type needs to be selected
from the following 2 types at
initiation of converter application.
1) Replacement (→NS1000)
2) Converting (→NS1000+Legacy Gateway)
(3) Enter the data to convert.
DMSYS
or
TDE100/200
DGSYS
TDE600
or
DBSYS
NCP500/1000
3-1. Procedure of Conversion (2)
Depending on the data to convert, the following screen will be displayed.
For TDA/E600, and TDA/E620
when the slave is connected
For NCP, TDA/E100, and TDA/E200
Click. [Next]
3-1. Procedure of Conversion (3)
1
Setup Master Unit
Parameter and operation are completely the same as Easy Setup wizard.
A part of region should change the setting.
Please refer to ‘3-2 Suffix Code’.
IP addresses, type of registration
and password, etc programmed on
TDE/NCP are displayed by default.
Converting time is estimated
to take with in 10 seconds
3-1. Procedure of Conversion (4)
2
Setup Slave Unit (when the slave is connected)
This operation is required in the case of source
database file contains an more than 3 expansion
unit setting of TDA600/620 or TDE600/620.
After converting the master unit, the ‘setup screen of slave unit’
is displayed automatically.
IP addresses, type of registration
and password, etc programmed on
TDE/NCP are displayed by default.
Converting time is estimated
to take with in 10 seconds
3-1. Procedure of Conversion (5)
When the conversion of data is completed, the report of the result is displayed.
Activation key is not transferred
at the converting database
Click. [Save]
3-1. Procedure of Conversion (6)
The new file name should be 'DCSYS‘.
Three steps can be selected.
After selection, click [OK].
1. Finish
DCSYS
The ‘DCSYS’ has to input. And,
converted DCSYS is downloaded.
Click. [Next]
2. Connection Online Mode
3. Open Offline mode
When you want to edit the data.
When you want to install the data to NS1000. (Go to next page)
3-1. Procedure of Conversion (7)
Please install the 'converted DCSYS' to NS1000 with online mode.
Menu [Utility] - [2.File] - [1.File Transfer PC to PBX]
C:\Documents- - - -DCSYS
Select the file name.
And click [Execute].
Next
This screen is displayed. Click [OK].
At last, the reset operation is necessary.
Menu [System Control] - [4.System Reset]
3-2. Suffix Code
Please change the setting to the area shown in the following tables.
Legacy gateway
NS1000
Suffix code
Area
Suffix code
Area
NE
CE
NE
CE
Eastern Europe
TR
Turkey
BX
Other
TW
Taiwan
RU
RU
Russia
UC
UC
Ukraine
BX
RU
BX
RU
BX
In area other than this table, the change is unnecessary.
Note
3-3. Result of Converting (1)
Reference
The following results are displayed when the data conversion is completed.
It might be effective help to make the new Configuration of NS1000.
These contents are examples.
Report of conversion result (examples)
Complete of Database conversion
Original file : PSN_TDE600
Original PBX : TDE600
Following Recommended A.K.
One-look Networking
Recommended AK is displayed.
Up to 100 IP Phone Capacity
Deleted Card
Both the deleted extension number and
Shelf1,Slot01 : IP-EXT16
the deleted CO number are described.
Deleted Extension
6780, 6781, 6782, 6783, 6784, 6785, 6786, 6787,
16788,16789,16790,16791, 792, 793, 794, 795
Shelf1,Slot02 : IP-GW16
Deleted CO line
007,008,009,010,011,012,013,014,
OPB card and any card on OPB card
015,016,017,018,019,020,021,022
are not supported to convert.
Shelf1,Slot01-01 : OPB3 - MSG4
3-3. Result of Converting (2)
Reference
Report of conversion result (examples)
Deleted Card
Shelf4,Slot15 : MCSLC16
Deleted Extension
10001,10002,10003,10004,10005,10006,10007,10008,
10009,10010,10011,10012,10013,10014,10015,10016
Deleted Remote Access Device
599 : MODEM
699 : ISDN Remote
Two IP-EXT16 cards were integrated
into one V-IPEXT32 card.
Change
IP-EXT16 : Shelf1,Slot01 -> V-IPEXT32 : Site01,Slot47
IP-EXT16 : Shelf2,Slot01 -> V-IPEXT32 : Site01,Slot47
IP-EXT16 : Shelf4,Slot01 -> V-IPEXT32 : Site02,Slot47
Change SVM-Voice Msg Extension No. to UM channel No.
591 : SVM-Voice Msg1
-> 5101 : Master UM channel 1
592 : SVM-Voice Msg2
-> 5102 : Master UM channel 2
New Assigned
5103 : Master FAX Extension number
Chapter 4
Appendix
Supported PBX Model
Application model
KX-NS1000 allows connecting the following system as legacy gateway system.
It means “The data of the application model is convertible “.
Legacy Platform's
TDA
TDE
NCP
Models
Yes / No
15
No
30/50
No
100/200
Yes
600/620
Yes
100D
No
100/200
Yes
600/620
Yes
500/1000
Yes
500 express
Yes
Change of version of DSYS from V4 to V6
Change of version of DSYS
Please use version 6 or late of UPCMC.
DGSYS
Example<V4>
DGSYS
V6
DGSYS
Suffix Table (1)
Suffix Code and Area table.
Suffix
code
Area
Suffix
code
Area
NE
NE
NE
NE
NE
NE
NE
NE
NE
NE
NE
NE
NE
NE
E
GR
AL
NZ
G
BL
DK
FI
FR
JT
NL
NO
PT
SP
SE
SL
CE
CE
E
GR
AL
NZ
NE
NE
NE
NE
NE
NE
NE
NE
NE
NE
NE
NE
NE
NE
UK
NE
AL
AL
G
BL
DK
FI
FR
JT
NL
NO
PT
SP
SE
SL
CE
TR
UK
GR
AL
NZ
Note
Germany. Austria
Belgium/Luxembourg
Denmark
Finland
France
Italy
Netherlands
Norway
Portugal
Spain
Sweden
Switzerland
Eastern Europe
Turkey
UK
Greece
Australia
New Zealand
Please select the
Area on the
converter.
Suffix Table (2)
Suffix Code and Area table.
Suffix
code
Area
Suffix
code
Area
HK
ML
SN
CN
M
BX
BX
BX
BX
AG
C
CE
RU
RU
BR
HK
ML
SN
CN
M
BX
BX
BX
SA
AG
C
CE
RU
RU
BR
XE
XE
XE
BX
M
BX
BX
BX
BX
AG
C
NE
RU
UC
BR
HK
ML
SN
BX
M
BX
TW
BX
SA
AG
C
CE
RU
UC
BR
Note
Hong Kong
Malaysia
Singapore
Others
USA
Other
Taiwan
BX
South Africa
Argentina
Canada
Eastern Europe
Russia
Ukraine
Brazil
Please select the
Area on the
converter.
Thank you !
The END