Unitronics
2009
Review
Hardware Review

Jazz® Series

M91 Series

Vision120™ Series

Vision130™ Series

Vision Graphic/Touch OPLC

Color Vision
Software & Utilities
Review
Hardware Review
Software & Utilities
®
Jazz Micro OPLC
TM
Key Points:
Two line display
Real Keypad for
Data entry
Modbus and open
protocol communication
SMS/ cellular connection
Auto-tune PID, up to 4 loops
Full project upload
Low cost
®
Jazz Micro OPLC
TM
9 models of JazzTM OPLC
JZ10-11-R10 –
6 DI, 4 RO
JZ10-11-T10 –
6 DI, 4 TO
JZ10-11-R16 – 6 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 6 RO
JZ10-11-T17 – 6 DI, 2 D or A (0-10V) inputs, 2 AI
(0/4-20 mA), 7
TO
JZ10-11-R31 –
16 DI, 2 D or A (0-10V) inputs, 2AI (0/4-20 mA), 11 RO
JZ10-11-T40 – 16 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 20 TO
JZ10-11-PT15- 3 DI, 3 D or A inputs, 3 PT1000/NI1000 inputs, 5 RO and
1 TO (HSO)
JZ10-11-UN20 – 9 DI, 2 D or A (0-10V) inputs, 1 AI (0/4-20 mA), 1
PT100/TC inputs, 5 RO, 2 TO
JZ10-11-UA24 – 9 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA),
2 PT100/TC inputs, 5 RO, 2 TO, 2 Analog Outputs
TM
M91 Micro OPLC
Key Points:
Two line display
Real Keypad for Data entry
Modbus & open protocol communication
SMS via GSM communication
Full project upload
Auto-tune PID, up to 4 loops
Expandable
Small Data Base (1024 registers)
Low cost
TM
M91 Micro OPLC
10 models of the M91 OPLC
M91-2-R1 - 10 DI, 1 AI , 6 RO
M91-2-R2C - 10 DI, 2 AI , 6 RO
M91-2-R34 - 20 DI, 2 A/D I, 12 RO
M91-2-R6C - 6 DI, 6 AI, 1HSI, 6 RO
M91-2-RA22 - 8 DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit, 8 RO
M91-2-T1 - 12 DI, 12 TO
M91-2-T2C - 10 DI, 2 A/D I , 12 TO
M91-2-T38
- 22 DI, 16 TO
M91-2-UN2 - 10 DI, 2 A/D/TC/PT100 Inputs (14 bit) , 12 TO
M91-2-UA2 - 10 DI, 2 A/D/TC/PT100 Inputs, 12 bits, 2 AO 12 bits , 10 TO
TM
TM
Vision120 Graphic OPLC
Key Points:
Graphic display 128x64
Real Keypad for Data entry
Application size of 448K
2 serial ports RS232/485
Modbus and open protocol
communication
Supports CANopen
SMS/cellular connection-GSM/GPRS
Full project upload
Expandable
Data Table
TM
TM
Vision120 Graphic OPLC
TM
TM
Vision120 Graphic OPLC
10 models of the V120 OPLC
V120-22-R1 - 10 DI, 1 AI , 6 RO
V120-22-R2C - 10 DI, 2 AI , 6 RO
V120-22-R34
- 20 DI, 2 A/D I, 12 RO
V120-22-R6C - 6 DI, 6 AI, 1HSI, 6 RO
V120-22-RA22 - 8 DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit, 8 RO
V120-22-T1
- 12 DI, 12 TO
V120-22-T2C - 10 DI, 2 A/D I , 12 TO
V120-22-T38
- 22 DI, 16 TO
V120-22-UN2 - 10 DI, 2 A/D/TC/PT100 Inputs (14 bit) , 12 TO
V120-22-UA2 - 10 DI, 2 A/D/TC/PT100 Inputs, 12 bits, 2 AO 12 bits , 10 TO
TM
TM
Vision130 Graphic OPLC
TM
TM
Vision130 Graphic OPLC
Key Points:
Graphic display 128x64, 2.4"
Real Keypad for Data entry
Application size of 512K; 20µsec per 1K
1 build in serial ports RS232/485
Option for a second port RS232/485 or Ethernet
Modbus and open protocol communication
serial and over IP
Supports CANopen (CANbus as an add on module)
GPRS/GSM/CDMA enabled
Full project upload
Expandable
Data Table, Text string library
TM
TM
Vision130 Graphic OPLC
9 models of the V130 OPLC
V130-33-R2 - 10 DI, 2 A/D I, 6 RO
V130-33-R34 - 20 DI, 2 A/D I, 12 RO
V130-33-RA22 - 8 DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit , 8 RO
V130-33-T2 - 12 DI, 2 A/D I, 3HSI and 7 HSO , 12 TO
V130-33-T38 -
22 DI, 2 A/D I, 3HSI and 7 HSO, 16 TO
V130-33-TA24 - 12 DI, 2 A/D I 14 bits +2 TC/PT100,
2 AO 12 bits, 1HSI 5 HSO , 10 TO
V130-33- R6 – 6 DI, 2 A/D I, 4 AI, 1HSI, 6 RO
V130-33-TRA22- 12 DI, 2AI, 2 PT100/TC, 1HSC, 4 RO,
2 AO, 4 HSO.
V130-33-TR34- 22 DI, 2 AI, 3 HSC, 8RO, 4 HSO.
TM
Vision Graphic/Touch OPLC
(V230/260/280/290/530)
TM
TM
Vision Graphic/Touch OPLC
TM
(V230/260/280/290/530)
Key Points:
Graphic display 128x64 to
320x240; 3.2” – 5.7”
Real Keypad for Data
entry/virtual keyboard on the
touch
Supports CANopen
GPRS/GSM/CDMA
enabled
Full project upload
Application size of 1MB;
Expandable
30µsec per 1K
Data Table
2 build in serial ports RS232
Modbus and open
protocol communication
Option for a 3rd port
RS232/485 or Ethernet
TM
Vision Graphic/Touch OPLC
(V230/260/280/290/530)
TM
TM
Vision Graphic/Touch OPLC
TM
(V230/260/280/290/530)
Expansions
EX-A1-expansion adapter
IO-DI8-TO8
Fast response
IO-DI16
IO-TO16
IO-DI8-RO4
IO-RO8
IO-RO16
IO-AI4-AO2
IO-DI8ACH
IO-AO6X
EX90-DI8-RO8
IO-ATC8
IO-PT400
IO-LC1/3
IO-PT4K
TM
Vision Graphic/Touch OPLC
(V230/260/280/290/530)
Snap-in I/Os
6 Snap-in models:
V200-18-E1B
V200-18-E2B
V200-18-E3XB
V200-18-E4XB
V200-18-E5B
V200-18-E6B
TM
EX-RC1- Remote IO Adapter
The EX-RC1 enables you to remotely locate I/Os
up to 1 kilometer from a PLC. You can include both PLCs and
adapters on the UniCAN network, up to a total of 60 nodes.
Up to 8 I/O modules can be connected to a single adapter.
XL Expansion Modules
EX-D16A3-RO8 / TO16
24 VDC
16 Digital Inputs
PNP/NPN, including 1 HS Counters
3 Analog Inputs
15 PNP+ 1 PNP/NPN Transistor Outputs,1 HSO
Or 8 Relay output (model EX-D16A3-RO8)
IO D16A3-RO16 / TO16
24 VDC
16 Digital Inputs
PNP/NPN, including 2 HS Counters
3 Analog Inputs
16 Relay/Transistor Outputs
TM
TM
Vision Color OPLC
TM
TM
Vision Color OPLC
Vision350TM
The first 3.5“ color
Touch screen OPLC
on the market
Digital, Analog and PT100/TC
inputs, Digital and Analog outputs
Application size of 1MB, 15µsec per 1K
Supports CANopen
Ethernet option
QVGA color TFT display
Support Micro SD
TM
TM
Vision Color OPLC
9 models of the Vision 350TM OPLC
V350-35-R2 - 10 DI, 2 A/D I, 6 RO
V350-35-R34 - 20 DI, 2 A/D I, 12 RO
V350-35-RA22 - 8 DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit , 8 RO
V350-35-T2 - 10 DI, 2 A/D I, 3HSI and 7 HSO , 12 TO
V350-35-T38 -
20 DI, 2 A/D I, 2 HSI and 7 HSO, 16 TO
V350-35-TA24 - 8 DI, 2 A/D I 14 bits +2 TC/PT100, 2 AO 12 bits, 1HSI 5 HSO , 10 TO
V350-35- R6 – 6 DI, 2 A/D I, 4 AI, 1HSI, 6 RO
V350-33-TRA22- 12 DI, 2AI, 2 PT100/TC, 1HSC, 4 RO, 2 AO, 4 HSO.
V350-33-TR34- 22 DI, 2 AI, 3 HSC, 8RO, 4 HSO.
HSC / Shaft Encoder
V130 & V350 with TRA22 or TR34 I/O board
Driver Type
PNP/NPN
Push-Pull
HSC
100 kHz Max
200 kHz Max
Shaft encoder
50 kHz Max
100 kHz Max
High Speed NPN Transistor output:
Frequency Range 5-200 kHz
Support PTO
TM
TM
Vision Color OPLC
Vision570TM
5.7“ color Touch screen
OPLC plus Snap-in &
expansion I/Os
TFT Color Graphic display, QVGA
Application size of 2MB; 9µsec per 1K
2 build in serial ports RS232/485
Option for a 3rd port RS232/485 or Ethernet
Modbus and open protocol communication serial or over IP
Build in Alarms, string library and trends tasks
CANopen Support
SD Support
Web server capabilities
And much more…
TM
TM
Vision Color OPLC
The New V570 model with built in I/O
V570-57-T34 :
16 DI (Isolated), 2 HSC / Shaft Encoder,
2 AI, 16 TO (Isolated)
Review
About Unitronics
Hardware Review
Software & Utilities
Software - programming environment
M91 and Jazz are
programmed using the
U90Ladder
All Vision products are
programmed using the
Visilogic
In order to ensure
Backwards
compatibility Unitronics
provides also the
Version swapper
Software Utilities - Remote Access
A tool that the machine
builder/system
integrator can give his
customer as an added
value for its selection to
work with Unitronics’
products
Using Remote Access one
can access the displays of
the PLC, operand values,
data tables and even
download using the
UniDownloader
Software Utilities - DataXport
DataXport is a server
based application that
allows to retrieve the
data stored at the
data tables of the PLC
using different
communication
methods and based
on automatic process
Software Utilities - Communication
DDE/OPC gives
a standard way
to connect to
the Unitronics
OPLC using
any SCADA or
other Windows
based
application
Software Utilities – SD Suite
SD Suite Use SD
Suite to format an SD
card to be compatible
with Unitronics OPLC,
and to Access,convert,
read, and export the
content of files that a
Unitronics OPLC
creates on a SD card.
Software Utilities – Remote Operator
Remote Operator - Enables you to use a PC to
view and work with several remote controller's HMI
panel at the same time.
Software Utilities – UniDownloader
UniDownloader - Enables you to download
complete applications to local or remote controllers.
These applications are in compressed .udc format.
Thank you