PROPOSTE DI NUOVI LAVORI IEC (NEW WORK ITEM PROPOSALS)
DOCUMENTO
Scadenza:
100/2455/NP
Scadenza:
TC IEC
Titolo
10-04-2015
100
Identification and communication interoperability method for
external DC power supplies used with data-enabled mobile
computing devices
17-04-2015
44/721/NP
44
Safety of machinery - Electro-sensitive protective equipment Safety-related sensors used for protection of person
86B/3874/NP
86B
Future IEC 61754-34, Ed.1.0: Fibre optic interconnecting devices
and passive components – Fibre optic connector interfaces - Part
34: Type URM connector family
111/363/NP
111
Technical documentation for the assessment of electrical and
electronic products with respect to the restriction of hazardous
substances
Scadenza:
24-04-2015
48B/2418/NP
48B
IEC 60512-99-002, Ed.1.0: Connectors for electronic equipment:
Test schedule for mating and unmating connectors under
electrical load, Part 60512-99-002, Particularly applicable to IEC
60603-7-xx series connectors
62D/1227/NP
62D
IEC 80601-2-XX: Part 2-XX: Particular requirements for the basic
safety and essential performance of medical robots for surgery
62D/1228/NP
62D
IEC 80601-2-XX: Part 2-XX: Particular requirements for the basic
safety and essential performance of medical robots for
rehabilitation, compensation or alleviation of disease, injury or
disability
76/517/NP
76
Photobiological Safety of Ultraviolet Lamp Products
87/561/NP
87
Measurement and evaluation of the cavitation noise
Scadenza:
01-05-2015
65E/449/NP
65E
IEC 61987-16, Ed 1.0: Industrial-Process Measurement and Control
- Data Structures and Elements in Process Equipment Catalogues
- Part 16: List of Properties (LOP) for density measuring
equipment for electronic data exchange
82/933/NP
82
Measurement procedures for materials used in photovoltaic
modules – Part 5-1 Suggested test methods for use with edge seal
materials (proposed future IEC 62788-5-1)
82/934/NP
82
Measurement procedures for materials used in photovoltaic
modules – Part 6-2: Moisture permeation testing with polymeric
films (proposed future IEC 62788-6-2)
86B/3876/NP
86B
Future IEC 61300-3-54/Ed1: Fibre optic interconnecting devices
and passive components - Basic test and measurement
procedures – Part 3-54: Examinations and measurements –
Angular misalignment between ferrule bore and ferrule axes for
cylindrical ferrules
108/586/NP
108
IEC 6xxxx, Ed. 1.0: Safety of Modular Data Centres (MDC)
112/315/NP
112
Future IEC 61857-31, Ed. 1.0: Electrical insulation systems –
Procedures for thermal evaluation – Applications with an expected
operating life less than 5000-hours.
pagina 1
PROPOSTE DI NUOVI LAVORI IEC (NEW WORK ITEM PROPOSALS)
Titolo
DOCUMENTO
TC IEC
112/316/NP
112
Future IEC 61857-32, Ed. 1.0: Electrical insulation systems –
Procedures for thermal evaluation – Multifactor evaluation by
diagnostic procedures
112/317/NP
112
Future IEC 61857-33, Ed. 1.0: Electrical insulation systems –
Procedures for thermal evaluation – Multifactor evaluation with
increased factors at elevated temperature
113/248A/NP
113
IEC/TS 62607-6-4, Ed. 1.0: Nanomanufacturing - Key control
characteristics Part 6-4: Graphene - Conductance measurements
using resonant cavity
Scadenza:
08-05-2015
13/1603A/NP
13
IEC 62056-1-1,Ed. 1.0: Electricity metering data exchange – the
dlms/cosem suite – Part 1-1: Template for DLMS/COSEM
communication profile standards
47/2225/NP
47
Future IEC 60749-41, Ed.1.0: Semiconductor devices - mechanical
and climatic test methods - Part 41: Reliability testing methods of
non-volatile memory devices
91/1247/NP
91
Future IEC 61188-8-2, Ed. 1.0: Component shape data
specification for CAD library Part 2: 3D shape data specifications
115/106/NP
115
System Requirements for DC yard equipment: Part 1 Line-Commutated Converters
Scadenza:
15-05-2015
25/514/NP
25
Quantities and units - Solar energy-wetware interaction [part 15 in
the ISO/IEC 80003 series]
25/515/NP
25
Quantities and units - Safety and Reliability of software for
e-health and telemedicines [part 16 in the ISO/IEC 80003 series]
25/516/NP
25
Quantities and units - Telebiometric Signal Integrity (control,
detection, correction) [part 17 in the ISO/IEC 80003 series]
46/546/NP
46
TEsting of balanced communication cabling in accordance with
ISO/IEC 11801 - Part 1-2: Installed Cabling - Additional requirements
for measurment of resistance unbalance with field test instrumentation
59/633/NP
59
Household and similar electrical appliances - Accessibility of controls,
doors, lids and handles
112/320/NP
112
Future IEC 62631-3-11, Ed.1.0: Dielectric and resistive properties
of solid insulating materials - Determination of resistive properties
(DC Methods) - Volume resistance and volume resistivity, method
for impregnation and coating materials
113/251/NP
113
IEC/TS 62607-6-3, Ed 1.0: Nanomanufacturing – Key control
characteristics – Part 6-3: Graphene – Characterization of
graphene domains and defects
Scadenza:
22-05-2015
48D/584/NP
48D
IEC 6XXXX. Ed. 1.0: Mechanical structures for electronic
equipment – Dimentions of mechanical structures of the 482,6 MM
(19 IN) series – Part X: Residential racks and cabinets for
intelligent houses
82/944/NP
82
Future IEC/TS 629xx, Ed.1.0: Information model for availability of
photovoltaic (PV) power systems
pagina 2
PROPOSTE DI NUOVI LAVORI IEC (NEW WORK ITEM PROPOSALS)
DOCUMENTO
TC IEC
116/216/NP
116
Scadenza:
Titolo
IEC 62841-3-12 Ed. 1.0: Electric Motor-Operated Hand-Held Tools,
Transportable Tools and Lawn and Garden Machinery - Safety Part 3-12: Particular requirements for transportable threading
machines
29-05-2015
23E/895/NP
23E
Electrical accessories - Circuit-breakers for overcurrent protection
for household and similar installations- Part 3: Circuit-breakers for
d.c. operation
47A/961/NP
47A
Semiconductor devices - advanced hybrid integrated circuits Alignment of stacked dies having fine pitch interconnect
86B/3882/NP
86B
Future IEC 61300-2-54, Ed.1.0: Fibre optic interconnecting devices
and passive components – Basic test and measurement
procedures – Part 2-54: Tests – Corrosive atmosphere (mixed gas)
87/566/NP
87
Ultrasonics – Physiotherapy systems – Field specifications and
methods of
measurement in the frequency range 20 kHz to 0.5 MHz
100/2472/NP
100
IPTV multimedia services and applications for IPTV -IPTV terminal
devices: Basic model
101/466/NP
101
Electrostatic Control in Health Care Facilities
Scadenza:
12-06-2015
10/957/NP
10
nsulating liquids – Unused modified or blended esters and
mixtures with esters for electrotechnical applications
31/1183/NP
31
Electrostatic hand-held spraying equipment - Safety requirements
- Part 1: Hand-held spraying equipment for ignitable liquid coating
materials
31/1184/NP
31
Electrostatic hand-held spraying equipment - Safety requirements
- Part 2: Hand-held spraying equipment for ignitable coating
powder
31/1185/NP
31
Electrostatic hand-held spraying equipment - Safety requirements
- Part 3: Hand-held spraying equipment for ignitable flock
65B/984/NP
65B
Calibration and Validation of Process Analysers
82/954/NP
82
Photovoltaic system performance – Part 2: Capacity evaluation
method (proposed IEC 61724-2, Ed.1.0)
Scadenza:
19-06-2015
34A/1843/NP
34A
46F/313/NP
46F
62D/1236/NP
62D
ISO 80601-2-xx, Ed. 1.0: Medical Electrical Equipment — Part 2-xx:
Particular requirements for basic safety and essential
performance of home healthcare environment ventilatory support
equipment for respiratory impairment
62D/1237/NP
62D
ISO 80601-2-xx, Ed.1.0: Medical Electrical Equipment — Part 2-xx:
Particular requirements for basic safety and essential
performance of home healthcare environment ventilatory support
equipment for respiratory insufficiency
LED packages – Long-Term Luminous Flux Maintenance
Projection
IEC 61169-XX, Ed. 1.0: Radio-frequency connectors Part 50:
Sectional specifications RF coaxial connectors with inner
diameter of outer conductors mm with Push on mating.
Characteristics impedance 50 Ohm (type SMPM)
pagina 3
PROPOSTE DI NUOVI LAVORI IEC (NEW WORK ITEM PROPOSALS)
DOCUMENTO
Scadenza:
TC IEC
Titolo
26-06-2015
45A/1012/NP
45A
Nuclear power plants – Instrumentation and control important to
safety – Management of ageing of sensors and transmitters - Part
2: Temperature sensors (proposed 62765-2)
46F/315/NP
46F
Radio-frequency connectors - Part XX: Sectional specification for
type L32-4 and L32-5 threaded multi-coaxial radio-frequency
connectors
48B/2428/NP
48B
IEC 61076-3-X, Ed.1.0: Detail specification for 8-way, shielded, free
and fixed high density connectors for data transfer and with
Power Over Ethernet capabilities
82/956/NP
82
Photovoltaic devices – Part 14: Outdoor infrared thermography of
photovoltaic modules and plants (proposed IEC 60904-14 or
alternatively IEC 60904-12-2)
111/371/NP
111
IEC 62321-10, Ed.1.0 Determination of certain substances in
electrotechnical products – Part 10: Polycyclic aromatic
hydrocarbons (PAHs) in polymers and electronics by gas
chromatography-mass
spectrometry (GC-MS)
Scadenza:
03-07-2015
48B/2432/NP
48B
IEC 61076-3-119, Ed.1.0: Connectors for electronic equipment –
Product requirements – Part 3-119: rectangular connectors - Detail
specification for unshielded, free and fixed 10 way connectors
with push-pull coupling for industrial environments with
frequencies up to 100 mhz
65B/991/NP
65B
Industrial Inspecting Thermal Imagers
86B/3894/NP
86B
Future IEC 62664-1-2, Ed.1.0: Fibre optic interconnecting devices
and passive components – Fibre optic connector product
specifications – Part 1-2: LC-APC duplex singlmode connectors
terminated on IEC 60793-2-50 category B1.1 and B1.3 fibre
86B/3895/NP
86B
Future IEC 62664-1-3, Ed.1.0: Fibre optic interconnecting devices
and passive components – Fibre optic connector product
specifications – Part 1-3: LC-PC duplex singlmode connectors
terminated on IEC 60793-2-50 category B1.1 and B1.3 fibre
pagina 4