Presentation (*, 7168 Kb)

advertisement
Laser engravers
FMARK series
By "Laser Technology Center"
www.ltc.ru
Our History
The "Laser Technologies Center " (LLC
"LTC"),
incorporated
in
2004,
was
reorganized from CJSC "Center of Laser
Technology" based at the Department of
"Welding and Laser Technology" of St.
Petersburg State Polytechnic University
that has been operating at the laser
market since 1988.
Our main areas of activities are design,
production and sale of laser processing
equipment
and
technologies
for
engraving and welding of a wide range of
materials. We also provide a broad range
of services in treatment of a variety of
materials, production of advertisement
and
branding
products,
supply
promotional gifts, etc.
www.ltc.ru
Directions of activities
РАЗРАБОТКА
New
technology
НОВЫХ
development
ТЕХНОЛОГИЙ
Sale ofПРОДАЖА
component
КОМПЛЕКТУЮЩИХ
parts
and service
И СЕРВИС
LaserУСЛУГИ
processing
services
ЛАЗЕРНОЙ
ОБРАБОТКИ
www.ltc.ru
Engineering
ИНЖИНИРИНГОВЫЙ
center
ЦЕНТР
ЦЛТ
LTC
И
РАЗРАБОТКА
Construction
and
ПРОИЗВОДСТВО
production
of
МЕДИЦИНСКИХ
medical lasers
ЛАЗЕРОВ
Production
of serial
ПРОИЗВОДСТВО
СЕРИЙНОГО
equipment
ОБОРУДОВАНИЯ
ВЫПОЛНЕНИЕ
Execution
of R&D on
ПО
НИОКР
state contracts
ГОСКОНТРАКТАМ
Manufacturing
of
ПРОИЗВОДСТВО
special-purpose
СПЕЦИАЛИЗИРОВАННЫХ
complexes
КОМПЛЕКСОВ
Production of serial equipment
Laser Systems of Fmark Series
(hereinafter referred to as LK
FMark) based on a fiber laser are
designed for precision marking and
engraving of a wide range of
materials. All systems are supplied
with powerful software designed
by LLC "LTC".
FMark laser system
www.ltc.ru
Software
The innovation designed by our specialists is original software
for Laser Systems Management A-Script
Basic set of A-Script functions :
• work with complex units, such as a combination of text, polygons, operators,
numbers, primitives,
• use any font (both true type, and linewise)
• preview expected results of marking
• change and combine process parameters,
• free from use of other graphics and CAD-systems
• arithmetic and logical operations with vector objects,
• user data feedback
• shading and filling objects with other objects,
• support of linear and two-dimensional barcodes.
www.ltc.ru
Areas of application
of laser marking
Main areas of application:
- speed marking of serial products;
- precision (high-accuracy) metals
marking;
- counterfeit protection;
- manufacturing of plate names/
control panels / stickers;
- branding of products;
- deep engraving of metals (for
further finishing);
- color marking of metals;
- high quality marking of materials
in microelectronics.
www.ltc.ru
Operation diagram of the system
The method of laser marking is based
on the fact that laser radiation has a
very high power density when it is
focused into a dot with a small
diameter.
In case of metals laser marking there
are three main types of interaction of
laser radiation with a material
1. Melting
2. Intense evaporation (boiling)
3. Creation
of
high-temperature
plasma
Stages of laser radiation exposure
to metal
www.ltc.ru
Advantages of laser marking
•
•
•
•
•
•
•
•
•
High marking speed (more than 500 characters / sec.)
Minimum line width (0.03 mm)
No need in supply materials
High precision marking (over 1,000 dpi);
Low power (0.4 kW);
No direct contact with the workpiece;
Ability to treat hard-to-reach places;
High wear resistance
Forgery-proof.
Data encoding
(guilloche method )
www.ltc.ru
High speed marking
3D metal
engraving
Comparative evaluation of
different sets of LK FMark systems
№
1
2
name
Description
LK FMark10
LK FMark equipped with
laser radiation source
10 W
LK FMark20
LK FMark equipped with
laser radiation source
20 W
Price,
thousand
$
34,5
37,5
3
LK FMark50
www.ltc.ru
LK FMark equipped with
laser radiation source
50 W
52,0
Key Characteristics
Ensures:
- High-precision treatment ( diameter of 30
microns);
- marking materials for microelectronics, without
surface layer damage;
- Possibility of a metals contrasting color marking.
Ensures:
- Possibility of relief engraving
- Possibility of engraving curved surfaces;
- High-quality engraving of materials with high
reflectivity
- Possibility of scribing materials
- Increased performance
Ensures:
- Quality deep-etched engraving of metals (with
finishing to follow);
- Increased performance by a more powerful
laser.
Innovations in design
A unique software A-Script allows you to solve efficiently a number of tasks that
previously were beyond the control of laser technologies.
Technology for creating a "true- bitmap"
image allows to control the impact of
laser radiation applied to any dot of the
marked image, which contributes to
having a grayscale image (bitmap
mode). That means, changing the
number of pulses, we change the
contrast of each dot, which allows for
high quality of the marked images.
Innovations of A-Script:
- A selection of unique technological modes of marking
- ability to adapt software for customized problems of our clients;
- Additional applications available;
- a technology of bidirectional making with a rotator, etc
www.ltc.ru
Practical application
LK FMark system has been used successfully
applied in a number of companies in Russia
and the CIS countries, including:
•
Open Joint-Stock Company "Plant Meteor",
Volgograd region, Volzhsky,
•
Open Joint-Stock Company "Corporation"
Roskhimzashchita", Tambov,
•
Closed Joint-Stock Company "Ozna Measuring Systems", Bashkortostan,
Oktyabtsky,
•
Limited Liability Company "DAKENERGETIKA", Dnepropetrovsk, Ukraine
•
FGUP "NIIEMP" Penza
•
Open Joint-Stock Company "Plant Atlas",
Stavropol, Izobilniy.
•
Open Joint-Stock Company "CNPO
"Leninets", St. Petersburg,
•
Limited Liability Company NPO NTES,
Tatarstan Republic, Bugulma,
•
Limited Liability Company "Hammerweapon", Kirov region, Vyatskie Polyany
www.ltc.ru
Performance of LK ЛК FMark
Characteristics
scanner
Size of treated area
Hardware and software
resolution
Speed of beam
Markable materials
Characteristics of LK FMark-20
system "Laser Technology Center"
Characteristics of LK Mini Marker
20 system of LLC "Laser Center"
2-axis scanners MS10, RAYLASE AG, 2-axis galvanometer scanners with
Germany
drives VM2500 +
60h60mm
110h110mm
180h180mm
1.8 m (at 110x110)
50x50mm
100x100mm
160h160mm
2.5 mm (treated area 100 * 100)
Adjustable up to 7 m / s
Adjustable, up to 8.7 m / s
Metals and alloys, precious metals,
alloys, plastics, semiconductors, film
TESA LASER, synthetic materials
Metals and alloys
In Russian the analogue of LK FMark is a laser engraver MiniMarker manufactured
by "Laser Center" (SPb). From the comparative table you can see that LK FMark
surpasses its analog equipment by the most of its functional characteristics.
www.ltc.ru
Comparison of different methods of
marking
Comparative analysis of the technical and economic characteristics of different
methods of marking was carried out through the example of serial marking of
plastic parts with size no larger than 70h90h50 mm, amount of parts not less than
1000 pcs.
Type of marking
Cost of marking of 1 items
(consumable supplies),
rub.
Laser Marking
0,015 (electricity)
Drop-jet marking
2 (electricity + paint +
nozzle)
Shock-dot marking
0.5 (electricity + needle)
Time of marking of 1
items seconds
10
20
28
Label marking
www.ltc.ru
3 (electricity + workpiece
material + paint)
10
Technology
drawbacks
low wear resistance
direct mechanical
impact on the item
Easy counterfeit
low adhesion
Thank You!
www.ltc.ru
Download