QUALITY
CUSTOMER TRUST
ON-TIME DELIVERY
ABOUT RAVE
An aerospace quality manufacturing company whose
undertaking is the supply of high quality, cost-effective
machining, gears and gear shafts with shared customer
focus on meeting delivery purchase order
commitments through transparency and trust.
We believe in employee development, investment in
advanced technology and continuous improvement.
Our customer’s business is our business.
Achievements
 ISO 9001:2008 QUALITY SYSTEM
 AS9100 in March 2014
 MANUFACTURING FOR SPACEX
 DRIVETEC PRODUCT LINE FOR NASCAR
 OILFIELD INDUSTRY
 Down Hole Tooling and Instrumentation
 REVERSE ENGINEERING AND DESIGN
 CLOSED LOOP GEAR MANUFACTURING
 Thomas Alaniva, VP of our Gear Division is
one of the pioneers of Closed Loop Gear
Manufacturing in the US.
Achievements
 PRECISION MANUFACTURING
 CLOSE TOLERANCES +/-.0001
 REM FINISHING 1 TO 3 Ra (MIRROR)
 HIGH EFFICENCY/PERFORMANCE GEARS USING LATEST
ENGINEERING EQUIPMENT AND SOFTWARE
 DEVELOPING GERMAN LONG LEAD TIME OIL/GAS HYD.
PUMPS TO SELL IN HOUSE, ALLOWING FOR
IMMEDIATE SUPPLY.
 NEW STATE OF THE ART MACHINING AND GEAR
EQUIPMENT
 TOP CUSTOMERS
 SPACEX, HALLIBURTON, BAKER HUGHES, BELL
HELICOPTER, ROBINSON HELICOPTER, NASCAR,
THOMAS INSTRUMENTS, DANA CORP.
Awards
 STATE OF TEXAS SMALL BUSINESS AWARD FOR EXCEPTIONAL PLANT
DEVELOPMENT
 APPROVED MINORITY OWNED SMALL BUSINESS FOR SOUTH
CENTRAL TEXAS
 ENTREPRENEUR OF THE YEAR AWARD FROM THE SEGUIN ECONOMIC
DEVELOPMENT COUNCIL
New Facility
Different Company
•
We are also ISO 9001: 2008 certified. We are registered with ITAR,
US Government’s SAM (System for Award Management) as well as
NATO. We are committed to Quality from Day 1. AS9100
Certification March 2014
•
We have built this company from ground up with brand new climate
controlled facility with state of the art machinery and experienced
professionals-who also happen to think out of box!
People
• Nick Patel: CEO, Successful entrepreneur with over twenty
years in business and over four (4) years with Arrow Gear
• Vinay Shah: COO, Over ten (10) years with State Government
as Engineer, sixteen (16) years in business
• Bruce Roberge: President, Over thirty seven(37) years in gear
industry in engineering and project management at Northstar
Aerospace and Arrow Gear
People
• Nathan Massey: Vice President, Comes from two
generations in machining, grinding, fabrication and seven (7)
years experience in gear box design.
• Magan Patel: VP, Engineering, Over thirty years of
experience including fifteen (15) years at Arrow Gear and
twenty three (23) at Solar Turbine-Caterpillar subsidiary
• Thomas Alaniva: VP Gear Division, Over twenty seven (27)
years experience in gear manufacturing
• Melissa Bauer: Quality Manager, Over twenty seven (27) years
in Aerospace Quality Assurance including Quality Engineer
and Supervisor positions at Northstar Aerospace
• Anthony W. Fedor III: Manufacturing Manager, Over twenty
seven (27) years in Manufacturing
• Kush Patel: Engineer, Texas A & M graduate
Equipment
MILL/TURN
NEW! NT5400SZ – 9Axis Turning and Milling Center (36.2” x 75.6”)
NEW! NLX2500SY
Dual Spindle Mori Seiki Lathe (14” x 27”)
TURNING
NEW! CNC MAZAK QTS 350 (28” X 50”)
MILLING
NEW! NVX5100 II /50 Taper, 4th Axis (41.3” x 20.87”x 20”)
NEW! Haas
VF-2SSYT, Super-Speed 12,000 RPM (30" X 20" X 20“)
NEW! Haas
EC-1600YZT , Integrated 4th axis 10,000 RPM (64" X 50" X 40“)
CYLINDRICAL GRINDING
NEW! 2012 CNC Studer Favorit (13.8” x 39”)
GEAR GRINDING
-Gleason 450HG Bevel Gear Grinder
Equipment
GEAR GRINDING
NEW! Klingelnberg Oerlikon G60 Spiral Bevel Gear Grinder
NEW! Klingelnberg Hofler Helix 400 SK Cylindrical Gear Grinder
NEWLY REBUILT Gleason 450HG Bevel Gear Grinder
HOBBING
-Pfauter PE300 CNC Hobber (2012 REMANUFACTURED)
-Barber Colman 16-36 Hobber (2012 REMANUFACTURED)
GEAR CUTTING
NEWLY REBUILT Gleason 175HC Gear Cutter
NEWLY REBUILT Gleason 450HC Gear Cutter
SHAPING
-Fellows Model 10-4 3-Axis CNC Gear Shaper (2012
REMANUFACTURED)
HEAT TREAT
NEWLY REBUILT Grieve TAH-500 Oven
Equipment
SHOP MANAGEMENT
-E2 Shop Floor System (ERP)
TESTING AND INSPECTION
- P65 Gear Analyzer with KIMOS/KOMET Closed Loop
Engineering Software (2014 Model)
-Zeiss Prismo (Gleason/Klingelnberg Interface, GearPro
Bevel/Involute, Calypso Software)
-Brown-Sharpe CMM Coordinate Measuring
Machine (PC-DMIS/Calypso Software)
-Gleason CAGE/GAGE Software Suite-Manufacturing and
Engineering (Closed Loop System)
-Gleason #17A Gear Tester
-Gleason #523 Gear Tester
-Gleason #14 Gear Tester
Equipment
TESTING AND INSPECTION
-MagWerks PSAH-545 54” Magnetic Inspection
-Nital Etch Line
-Gear Teeth Hardness Tester
-Digital Superficial Rockwell Hardness Tester-on order
-Starrett HB-400 Optical Comparator
-J & L Classic 14T Optical Comparator
-Gagepack Calibration Systems for Precision Gages and
Equipment Control
-Discus (FAI) Software Systems
Expansion
• ADVANCED MACHINES: MULTI AXIS, MULTI
OPERATION
• INCREASED GEAR GRINDING CAPABILITIES
• HEAT TREATMENT: RAVE THERMAL
• ADDITIONAL BUILDING: 30, 000 SF
• LAND: TOTAL 40 ACRE SITE
Thank You!
We thank you for interest in our company. We
appreciate your feedback.