Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 1
BECKER ACROMA & PAINT
Fine Finishes
Product Overview
LACQUER CO.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 2
Who Is Becker Acroma
Established in 1874 Carl Wilhelm Becker
opened his first factory, producing paints and
varnishes.
Becker Acroma is part of Beckers Corporate
which has over $1.3 billion in sales world wide.
Becker Acroma sales are over $400 Million
annually.
Over 1000 wood finishing specialists employed
worldwide.
#1 in Interior Wood Coatings sales in Europe.
Leader in the formulation of environmentally
friendly coatings
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 3
Who Is Becker Acroma
Head office in Sweden.
Production units in:
 Sweden, 2 locations
 Germany
 Italy
 France
 United kingdom
 Canada
 United States
Major R & D centers in:
 Sweden
 Germany
 Italy
 Canada
 United States
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 4
What Is Becker Acroma Known For
Environmentally Responsible
Coatings
High Quality Coatings and
Coatings Solutions
Formulations on the Cutting
Edge of Technology
European Technology
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 5
SOLVENT STAINS, GLAZES, DYES & CONCENTRATES
Product Overview
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 6
Stains, Glazes, Dyes & Concentrates
Becker Acroma Stains,
Glazes, Dyes
& Concentrates
Becker Acroma EZ Stain
Glazing Stain Neutral New
Glazing GP
ARTI Dyes
ARTI Concentrates
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 7
Stains
Becker Acroma Stains are made
with pigments and dyes. Pigments
cover the grain of the wood and
dyes accentuate the grain.
Along with the pigments and dyes
we use a binder to hold the
pigments to the wood.
Combine these ingredients with a
blend of solvents and you have a
stain.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 8
Stains
Becker Acroma EZ Blend Stain Base
HS5111
Strengths:
Alkyd Based Quick Dry
Easy to apply
Spray and Wipe and Wipe only applications
Can be used under all solvent based and water
based sealers and topcoat finishes with adequate
dry time
Tinting Info:
Colorants:
Evonik 844/866 Pigments
Arti Concentrates
EZ-Stain tinters and dyes
Maximum Colorant:
20% Pigments
10% Concentrates/Dyes/Tinters
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 9
Glazes
Becker Acroma Glazes
Accentuate the details in a finished good
Adhere to previous finishing steps
Wet glazes are meant to be applied and removed
when wet
Dry glazes are meant to be applied and removed
when dry
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 10
Glazes
Glazing Stain Neutral HW LR09383
Strengths:
Can be used as a Wiping Stain or a Glaze
Easy to apply, spray or wipe
Limited spattering
Excellent adhesion to wood and to finishing materials
Air dry 2 hours, force dry 30 minutes
Tinting Info:
Colorants:
Evonik 844
Arti Pigments
Arti Dyes
Maximum Colorant:
20% Pigments
5% Dyes
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 11
Glazes
Antik Tinktur Dry Glaze XS510T
Strengths:
Easy to apply, spray or brush on
Quick dry time
Remove with Scotch Brite
Tinting Info:
Colorants:
Evonik 844
Arti Pigments
Maximum Colorant:
2% Pigments
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 12
Dyes & Concentrates
Becker Acroma ARTI Dyes &
Concentrates are formulated to
soak into the fibers of the wood
instead of being left on top like
pigment.
Commonly used to evenly color
the wood before staining.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 13
PRE-CATALYZED, POST CATALYZED PRODUCTS
Product Overview
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 14
Pre-Catalyzed Coatings
Pre-Catalyzed Coatings
Becker Acroma adds a catalyst in the coating at
our factory during production. The catalyst
initiates a cross-linking which changes the
chemical properties of the coating. It gives the
coating many desirable properties such as:
Better chemical resistance than NC
Fast Drying
One Component / no catalyst add
Forgiving
Higher solids than NC (15-50% by weight)
6 month pot life
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 15
Clear Pre-Catalyzed Sealers
Becker Acroma Clear
Pre-Catalyzed Sealers
Mini Pre-Cat 192 Sealer
NL5201
Care Seal Pre-Cat HAPS Free
FL5312
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 16
Clear Pre-Catalyzed Sealers
Mini Pre-Cat 192 Sealer NL5201
Mini Pre-Cat 192 sealer is formulated
as a pre-catalyzed clear sealer for
natural or stained woods. This sealer
is very fast drying and has excellent
sand ability.
19% Volume Solids
26% Weight Solids
Catalyst: N/A
Strengths:
Easy to use
Pre reduced
Easy to sand
Fast drying
For price sensitive clients
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 17
Clear Pre-Catalyzed Sealers
Care Seal Pre-Cat HAPS Free FL5312
Care Seal Pre-Cat is a pre-catalyzed and
pre-reduced solvent borne sealer for use on
most light wood substrates. Contains UV
light absorbers which delays the yellowing
of the wood and has very good light
resistance.
20% Volume Solids
26% Weight Solids
Catalyst: N/A
Strengths:
Low grain raise
Easy to use
Pre reduced
Extremely easy to sand
Fast drying
HAPS free
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 18
Clear Pre-Catalyzed Topcoats
Becker Acroma Clear
Pre-Catalyzed Topcoats
Bernyl Intro NM5202-00XX
Bernyl Facett LV HAPS Free NM5212-00XX
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 19
Clear Pre-Catalyzed Topcoats
Bernyl Intro
NM5202-00XX
Bernyl Intro is a pre-catalyzed and prereduced clear coating for natural or
stained woods. This product has a very
low formaldehyde emission and meets
the German E1 specification for
formaldehyde Emission.
20% Volume Solids
26% Weight Solids
Catalyst: N/A
Strengths:
Easy to apply
Ready to spray, pre-reduced
Fast drying
Sands easy
Low formaldehyde emissions
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 20
Clear Pre-Catalyzed Topcoats
Facett LV HAPS Free NM5212-00XX
Bernyl Facett LV is a high solids HAPS free
coating with a delivered viscosity the
same as our suggested application
viscosity. It allows speedy, problem-free
coating of wood and has a low
formaldehyde emission.
23% Volume Solids
30% Weight Solids
Catalyst: N/A
Strengths:
High build
Fast drying
Durability of lower level post catalyzed coatings
Best pre-catalyzed clear on the market
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 21
Pre-Catalyzed Primer/Filler
Becker Acroma Pigmented
Pre-Catalyzed Primer/Filler
Ultra Hide Precat Primer/Filler
ND52003
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 22
Pigmented Pre-Catalyzed Primer/Filler
Ultra Hide White Pre-Cat Primer/Filler
ND52003
Ultra Hide White Pre-cat Primer/Filler is a
pre-catalyzed white primer for MDF and
other woods. Has fast drying properties
and excellent sanding characteristics.
25% Volume Solids
43% Weight Solids
Catalyst: N/A
Strengths:
High build
Sands easily
Fast drying
Easy to use
Good for MDF and other woods
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 23
Pigmented Pre-Catalyzed Topcoat
Becker Acroma Pigmented
Pre-Catalyzed Topcoat
Ultra Hide Pre-Cat Lacquer
NG52003-9001X
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 24
Pigmented Pre-Catalyzed Topcoat
Ultra Hide Pre-Cat Lacquer
NG52003-9001X
Ultra Hide Pre-Cat Lacquer is a high
quality pre-catalyzed nitrocellulose
lacquer formulation that has exceptional
hiding compared to other pigmented precatalyzed pigmented lacquers.
27% Volume Solids
41% Weight Solids
Catalyst: N/A
Strengths:
High build
Fast drying
Easy to apply
Excellent filling properties
Better hide
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 25
Post Catalyzed Coatings
Becker Acroma Post Catalyzed
Coatings
The applicator adds a catalyst to the coating at
the time of application.
The catalyst initiates a chemical reaction or crosslinking which changes the chemical properties of
the coating.
This catalyst causes the cross-linking reaction to
happen faster than a pre catalyzed coating and
provides a more durable product.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 26
Post Catalyzed Coatings
Becker Acroma Post Catalyzed
Coatings
Better chemical resistance than Precatalyzed coatings
Higher solids than Pre-catalyzed (15-79%
by weight)
Very good chemical / scratch resistance.
Less yellowing or non yellowing.
1 year shelf life
Less coats to achieve the same finish as
precatalyzed coatings or NC coatings
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 27
Clear Post Catalyzed Sealer
Becker Acroma Clear Post Catalyzed
Sealer
Care Seal HS Post Catalyzed HAPS Free
FF5320
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 28
Clear Post Catalyzed Sealer
Care Seal HS Post Catalyzed
HAPS Free FF5320
Care Seal HS is a HAPS free sealer for
most wood substrates. Care Seal HS gives
good build on vertical spray applications.
30% Volume Solids
37% Weight Solids
10% Catalyst
Strengths:
Good build on vertical spray
Excellent light stability
Low formaldehyde emissions
Excellent sand ability
Fast drying
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 29
Clear Post Catalyzed Topcoats
Clear Post Catalyzed Topcoats
Amerivar DM5361-00XX
Bernyl Reliant DM5342-00XX
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 30
Clear Post Catalyzed Topcoats
Amerivar Clear DM5361-00XX
Amerivar Clear is a HAPS free post catalyzed acid
cured clear coating with high build properties.
This product is fast drying and with short curing
times can be stacked quickly. This product has
good sag resistance and is designed for vertical
or flat spray applications.
30% Volume Solids
37% Weight Solids
10% Catalyst
Strengths:
Good build on vertical spray
Excellent light stability
Low formaldehyde emissions
Excellent sand ability
Fast drying
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 31
Clear Post Catalyzed Topcoats
Bernyl Reliant HAPS Free DM5342-00XX
Bernyl Reliant is a HAPS free post catalyzed
acid cured clear coating with exceptionally
fast drying properties. Bernyl Reliant brings
out the natural patina and beauty of wood.
27% Volume Solids
35% Weight Solids
7% catalyst
Strengths:
Good scratch & chemical resistance
Fast drying
Excellent flow & leveling
Easy to Sand – Use as a self seal
Low formaldehyde emission
Contains UV absorbers
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 32
Pigmented Post Catalyzed Primer
Becker Acroma Post Catalyzed
Pigmented Primer
Bernyl Unisurfacer White
DF5354-9001
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 33
Pigmented Post Catalyzed Primer
Bernyl Unisurfacer White DF5354-9001
A post catalyzed acid cured primer ideal for
wood, wood-substrates, HDF and MDF. The
coverage of this product is extremely good
and its hold-out of the top coat is excellent.
Best Primer/Surfacer on the market!
47% Volume Solids
65% Weight Solids
13% catalyst
Strengths:
Excellent hiding
High solids / high build
Fast drying
Sands easily
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 34
Pigmented Post Catalyzed Topcoat
Becker Acroma Post Catalyzed
Pigmented Topcoat
Matador White
DH5360-9001X
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 35
Pigmented Post Catalyzed Topcoat
Matador White
DH5360-9001X
A high quality post catalyzed, acid cured
enamel. Matador has the highest solids
content in the market today and produces
a gorgeous finish on Bernyl Unisurfacer.
62% Volume Solids
75% Weight Solids
12% catalyst
Strengths:
Excellent Hiding / Eliminates “Blue lines”
HAPS Compliant
High solids / high build
Fast drying
Sands easily
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 36
POLYURETHANE SOLVENT FINISHES
Product Overview
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 37
Polyurethane Coatings
All PU products are Formaldehyde free and allow for LEEDs
points
All PU products are developed in accordance with the most strict
European Union regulations surrounding operator safety
Excellent aesthetic aspect
Very smooth finish
High physical-chemical resistances
More Flexible
Can apply up to 8 to 12 dry mils (multi-day application)
Multiple coats - always build with the sealer
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 38
Polyurethane Product Range
Transparent sealers and topcoats
 Available in Regular / Aromatic
& Acrylic / Aliphatic PU’s
Primers and pigmented
topcoats
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 39
Regular Polyurethanes - Aromatic
Standard Clear Polyurethane
Sealer TL4396
Good transparency. High covering
Power. Easy application on vertical
Surfaces. Standard curing.
Formaldehyde free.
Allows for LEEDs points!
42% Volume Solids
49% Weight Solids
50% TV4110 Isocyanate Hardener
Strengths:
3 to 4 hr. pot life
Can use 844 tints – 10% by volume
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 40
Regular Polyurethanes - Aromatic
Fast Clear Polyurethane Sealer
TL4386
Excellent covering power. Good
Sand ability. Good transparency.
Fast curing. Formaldehyde free.
Allows for LEEDs points!
44% Volume Solids
50% Weight Solids
50% TV4110 Isocyanate Hardener
Strengths:
3 to 4 hr. pot life
Can use 844 tints – 10% by volume
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 41
Regular Polyurethanes - Aromatic
Hard Curing Polyurethane
Topcoat TM4064-00XX
Good covering power. Good sand
ability. Hard curing. Use as self
sealing. Formaldehyde free.
Allows for LEEDs points!
34% Volume Solids
40% Weight Solids
50% TV4240 Isocyanate Hardener
Strengths:
3 to 4 hr. pot life
Can use 844 tints – 10% by volume
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 42
Regular Polyurethanes - Aromatic
Multicoat Polyurethane Topcoat
TM4226-00XX
Good covering power. Good final
aspect. Great scratch resistance.
Multicoat, use as self sealing.
Formaldehyde free.
Allows for LEEDs points!
41% Volume Solids
47% Weight Solids
50% TV4110 Isocyanate Hardener
Strengths:
3 to 4 hr. pot life
Can use 844 tints – 10% by volume
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 43
Acrylic Polyurethane - Alaphatic
Acrylic Multicoat Polyurethane
Topcoat SM4210-00XX
Very good smoothness, good covering
power and non-yellowing. Good for
Open pore. Use as self sealing.
Formaldehyde free.
Allows for LEEDs points!
20% Volume Solids
24% Weight Solids
10% SV4360 Isocyanate Hardener
Strengths:
Lower solids than regular aromatic PU’s
Non-yellow and can be used over whites & pastels
1 day pot life
Can use 844 tints – 10% by volume
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 44
High Gloss Acrylic Polyurethane
High Gloss Acrylic Polyurethane
Multicoat SC4220
Good surface hardness. Fast curing.
Use as self sealing. Formaldehyde
free.
Allows for LEEDs points!
62% Volume Solids
75% Weight Solids
50% SV4360 Isocyanate Hardener
Strengths:
Lower solids than regular aromatic PU’s
Non-yellow and can be used over whites & pastels
1 day pot life
Can use 844 tints – 10% by volume
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 45
Pigmented Polyurethanes
White Polyurethane Primer
TF4321-9007
Good fill properties. High covering
power. Easy application on vertical
surfaces. Fast curing. Formaldehyde
free.
Allows for LEEDs points!
51% Volume Solids
69% Weight Solids
60% TV4110 Isocyanate Hardener by volume
Strengths:
High solids
Fast dry, easy sand ability
3 to 4 hr. pot life
Can use 844 tints – 10% by volume
Thanks to a complete tintometric system which uses heavy metal-free pigmented pastes in respect to rule EN71-3,
it is possible to match all formulations of the most common colour charts.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 46
Pigmented Polyurethanes
White Deep Matte Polyurethane
Topcoat TH4401-9100X
Good fill properties. High covering
power. Great flow and feel. Very fast
drying. Formaldehyde free.
Allows for LEEDs points!
49% Volume Solids
69% Weight Solids
70% TV4240 Isocyanate Hardener by volume
Strengths:
High solids
Fast dry, easy sand ability
6 to 7 hr. pot life
Can use 844 tints – 10% by volume
Thanks to a complete tintometric system which uses heavy metal-free pigmented pastes in respect to rule EN71-3,
it is possible to match all formulations of the most common colour charts.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 47
Pigmented Polyurethanes
White High Gloss Polyurethane
Topcoat TH4501-90039
Good fill properties. High covering
power. Great flow and feel. Very fast
drying. Formaldehyde free.
Allows for LEEDs points!
52% Volume Solids
70% Weight Solids
100% TV4202 Isocyanate Hardener by volume
Strengths:
High solids
Fast dry, easy sand ability
5 to 6 hr. pot life
Can use 844 tints – 10% by volume
Thanks to a complete tintometric system which uses heavy metal-free pigmented pastes in respect to rule EN71-3,
it is possible to match all formulations of the most common colour charts.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 48
Thinners / Additives
Becker Acroma has a full range of thinners to fulfil any
customer request.
For PU products we suggest the following thinners:
Winter:
TT5250
Summer:
TT5205, TT5230
Slow thinner:
TT5131
Other Additives:
TZ4401 Matting Paste
TZ4614 Slip/Anti Scratch
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 49
AIR DRY WATER BASED FINISHES/STAINS/GLAZES/DYE
CONCENTRATES
Product Overview
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 50
Eco Stains
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 51
Eco Stains
Becker Acroma W/B Stains,
Glazes & Dye Concentrates
ECO Blend Stain Wiping Stain
Eco Blend Spray Stain
Hydra Dry Glaze
Aqua Chroma Glaze
Aqualux Dye Concentrate
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 52
Eco Stains
Becker Acroma Eco Stains are made
with pigments and dyes. Pigments
cover the grain of the wood and dyes
accentuate the grain.
Along with the pigments and dyes we
use a binder to hold the pigments to
the wood.
Combine these ingredients with a
blend of W/B additives and you have a
stain.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 53
Eco Blend Wiping Stain
Eco Blend Wiping Stain Base ES5600
Eco Blend is a unique water based
wiping stain base and is the core of
the exclusive Eco Blend Water Stain
Intermix system. It is the easiest to
use water wiping stain on the market
and creates a look that can be
compared to solvent wiping stains.
Eco Blend is part of a family of
“Green Solutions” from Becker
Acroma.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 54
Eco Blend Wiping Stain
Eco Blend Wiping Stain Base ES5600
Strengths:
30-60 dry time
Easy to apply
Spray/Wipe and Wipe only applications
Can be used under all water based and solvent
based sealers and topcoat finishes with adequate
dry time
Tinting Info:
Colorants:
Huls 896 Pigments
Aqualux Concentrates
Eco Stain tinters
Maximum Colorant:
20% Pigments
10% Concentrates/Dyes/Tinters
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 55
Eco Blend Spray Stain
Eco Blend Spray Stain Base ES5160
Eco Blend Spray Stain provides
excellent grain definition and creates a
look that can be compared to solvent
spray stains. It’s forgiving spray
characteristics allows it to lay down
evenly with minimal grain raise.
Eco Blend is part of a family of
“Green Solutions” from Becker
Acroma.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 56
Eco Blend Spray Stain
Eco Blend Spray Stain Base ES5160
Strengths:
30-60 minute dry time
Uniformity & Easy color control
Minimal Grain Raise
Can be used under all water based and solvent
based sealers and topcoat finishes with adequate
dry time
Tinting Info:
Colorants:
Evonik 896 Pigments
Aqualux dye Concentrates
Maximum Colorant:
7% Pigments
10% Concentrates/Dyes/Tinters
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 57
Aqua Chroma Wet Glaze
Aqua Chroma Wet Glaze YS5300
Strengths:
2 hour minute dry time
Thixotropic
Can be used under all water based and solvent
based sealers and topcoat finishes with adequate
dry time
Tinting Info:
Colorants:
Evonik 896 Pigments
Maximum Colorant:
10% Pigments
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 58
Hydra Dry Glaze
Hydra Dry Glaze ES5300
Strengths:
30 minute dry time
Thixotropic
Powders easily
Can be used under all water based and solvent
based sealers and topcoat finishes with adequate
dry time
Tinting Info:
Colorants:
Evonik 896 Pigments
Maximum Colorant:
5% Pigments
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 59
Aqualux Dye Concentrate
Becker Acroma Aqualux Dye
Concentrates are formulated to
absorb into the fibers of the wood
instead of being left on top like
pigment.
Commonly used to evenly color
the wood before staining.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 60
WATERBORNE PRODUCTS
Product Overview
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 61
Akvaline Sealers and Topcoats
 Wet the wood (lacquer look)
 Superior Look and Clarity
 Minimized Grain Raise
 Fast Dry
 Soft Feel
 Hard/Durable Finish
 Lightfast
 No Formaldehyde
 As low as 32 g/l VOC
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 62
Waterborne technologies
Our conventional dry water
based products are:
Clears:
Akvaline 212
Akvaline 215
Akvaline 318
Akvaline Plus
Pigmented:
Akvasurf
Akvaboard
Akvatopp
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 63
Waterborne Conventional Drying Coatings Characteristics
All have no added formaldehyde
No remelding of the product (does not dissolve itself)
Can be force dried in less time than conventional dry solvent based
coatings
Becker has some of the lowest VOC formulations
Durability is between a precat and a post cat solvent based product
Single component non yellowing (Akvaline 212 & Akvaline 215)
All can react with varying degrees to high tannin levels in wood
All are non hazardous and non flammable
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 64
Akvaline 212 Pre-Cat Clear
Akvaline 212 Pre-Cat
EM5502-00XX
Akvaline 212 pre-catalyzed is a one component,
waterborne clear coating for stained or natural woods.
Akvaline 212 contains no formaldehyde and has been
given the MAS Environmental “CERTIFIED GREEN”
approval for LEEDs projects.
32% Volume Solids
36% Weight Solids
VOC 89 g/l
Strengths:
Very good sanding
Very good block resistance
Very good print resistance
Very good clarity
Good chemical resistance
Excellent mar resistance
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 65
Akvaline 215 Pre-Cat Clear
Akvaline 215 Pre-Cat
EM5503-00XX
Akvaline 215 pre-catalyzed clear is a one component,
acrylic waterborne clear coating. Akvaline 215 clear
contains no formaldehyde and has been given the
MAS Environmental “CERTIFIED GREEN” approval
for LEEDs projects.
26% Volume Solids
29% Weight Solids
VOC 80 g/l
Strengths:
Lower solids
Higher in viscosity
Dries a little slower than 212
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 66
Akvaline 318 Pre-Cat Clear
Akvaline 318 Pre-Cat EM5504-00XX
Akvaline 318 Pre-Cat is a waterborne acrylic clear coating
with excellent clarity and feel. Akvaline 318 is suitable for
stained or natural woods, including those rich in tannic
acid such as nut and fruit woods. Akvaline 318 contains
no formaldehyde and has been given the MAS
Environmental “CERTIFIED GREEN” approval for LEEDs
projects.
34% Volume Solids
37% Weight Solids
VOC 53 g/l
Strengths:
Good sanding
Very good adhesion to various
substrates
Good water and chemical resistance
Less discoloration on oak and cherry
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 67
Akvaline Plus Clear
Akvaline Plus EM5518-00XX
Akvaline Plus conversion varnish is a one or two
component waterborne acrylic clear coating with excellent
clarity and feel. It provides increased surface hardness,
scratch resistance, moisture, and chemical resistance.
Akvaline Plus contains no formaldehyde and has been
given the MAS Environmental “CERTIFIED GREEN”
approval for LEEDs projects.
35% Volume Solids
38% Weight Solids
Catalyst – 5%
Strengths:
VOC 53 g/l
Easy Sand
Excellent clarity
Quick dry
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 68
Akvasurf Pigmented White
Waterborne
Akvasurf
ED5561-9002
Akvasurf pre-catalyzed is a fast drying waterborne
primer that has good flow and filling properties.
This high solids product sands as well as the
best solvent based primers on the market. Akvasurf
contains no formaldehyde and has been given the MAS
Environmental “CERTIFIED GREEN” approval for LEEDs
projects.
35% Volume Solids
42% Weight Solids
VOC 55 g/l
Strengths:
Works like a solvent based post
catlyzed primer
Single component
High solids / high build
Sands easily
Fast drying
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 69
Akvaboard Pigmented White
Waterborne
Akvaboard White
ED5201
Akvaboard is a fast drying waterborne primer that is
designed for spray, curtain coater, or vacuum
applications. This high solids product has excellent
adhesion, including over 100% UV sealers. Akvaboard
contains no formaldehyde and has been given the MAS
Environmental “CERTIFIED GREEN” approval for LEEDs
projects.
47% Weight Solids
67% Weight Solids
VOC 32 g/l
Strengths:
Excellent adhesion to UV or other
coatings
Extremely fast dry time for block
resistance
Likes hot temperatures for
drying
Excellent mud crack resistance
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 70
Akvatopp Pigmented White
Waterborne
Akvatopp White
EG5570-9001
Akvatopp pre-catalyzed white is a waterborne acrylic
pigmented topcoat suitable for most applications. This
fast drying product has a silky feel and develops an
extremely durable finished surface. It has high solids
and provides excellent hiding properties. Akvatopp
contains no formaldehyde and has been given the MAS
Environmental “CERTIFIED GREEN” approval for LEEDs
projects.
33% Volume Solids
44% Weight Solids
VOC 101 g/l
Strengths:
High solids / high build
Fast drying
Non yellowing
Works well with oven drying
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 71
Becker Acroma Water Based Systems
Typically used as self seal
Akvalines 212, 215, 318, and Akvaline
Plus can all be used over or under
each other
Use over solvent sealer can create
adhesion or yellowing problems (test
or check with lab first)
Drying – Good air movement and
humidity control will dramatically
decrease dry times
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 72
SOLVENT AND WATER BASED UV CURED FINISHES
Product Overview
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 73
Solvent and Waterborne UV technologies
Stain Base:
Waterborne UV Stain Base
Clears:
Uvett 100% Solids R/C Sealer
Speedo Dual Cure Clear Topcoat
Beckry Clear Topcoat
Aqualight Waterborne Topcoat
Pigmented:
Beckry Prime Pigmented Primer
Beckry Top Pigmented Topcoat
Aqualight Prime Pigmented Primer
Aqualight Top Pigmented Topcoat
Becker Acroma UV products and finish systems can be specifically tailored for use on most automated finish lines. Please contact
Becker Acroma or your local Becker Acroma distributor for specific product applications and standard operating procedures.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 74
UV Stain Base
Waterborne UV Stain Base
LR08672
Waterborne stain base for use under
all Becker Acroma UV cured finish
systems.
Allows for LEEDs points!
VOC 54 g/l
Tinting Info:
Colorants:
Evonik 896 Pigments
Aqualux Concentrates
Becker Acroma UV products and finish systems can be specifically tailored for use on most automated finish lines. Please contact
Becker Acroma or your local Becker Acroma distributor for specific product applications and standard operating procedures.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 75
Uvett 100% Solids R/C Sealer
Uvett 100% Solids R/C Sealer
UF5439Q
UV Roller coat sealer for treatment of most
wooden substrates. It has good filling
Properties and is easy to sand. Topcoat with
one of Becker Acroma’s UV topcoats.
Allows for LEEDs points!
100% Volume Solids
VOC 0 g/l
Drying and Curing:
UV Curing:
Min. UV dose:
2 lamps (Mercury); 6 m/min
280-320 mj/cm2
Becker Acroma UV products and finish systems can be specifically tailored for use on most automated finish lines. Please contact
Becker Acroma or your local Becker Acroma distributor for specific product applications and standard operating procedures.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 76
Speedo Dual Cure Clear Topcoat
Speedo Clear Topcoat DM5521-00XX
Post catalyzed, acid & UV curing clear coating for stained or
natural woods. Speedo Clear has a UV curable portion within the
product which provides a finish that is quick curing and has excellent
stackability.
30% Volume Solids
36% Weight Solids
VOC 616 g/l
Drying and Curing:
Flash off:
Drying oven:
UV Curing:
Min. UV dose:
5-10 min. (86-95F)
5-10 min. (120)
2 lamps (Mercury); 6 m/min
280-320 mj/cm2
Becker Acroma UV products and finish systems can be specifically tailored for use on most automated finish lines. Please contact
Becker Acroma or your local Becker Acroma distributor for specific product applications and standard operating procedures.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 77
Beckry Clear 100% UV Topcoat
Beckry Clear UV Topcoat UM5755-00XX
Beckry is a clear UV lacquer for furniture and millwork. Low viscosity
makes it suitable for vacuum coat or spray application. Not for use on
MDF. Free from styrene.
Allows for LEEDs points!
40% Volume Solids
46% Weight Solids
VOC 14 g/l
Drying and Curing:
Flash off:
Drying oven:
IRM:
UV Curing:
Min. UV dose:
5-10 min. (86-95F)
5-10 min. (176)
60-80 sec., surf. Temp = (131-158F)
2 lamps (Mercury); 6 m/min
280-320 mj/cm2
Becker Acroma UV products and finish systems can be specifically tailored for use on most automated finish lines. Please contact
Becker Acroma or your local Becker Acroma distributor for specific product applications and standard operating procedures.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 78
Aqualight Waterborne 100% UV Topcoat
Aqualight WB UV Topcoat WM5700-00XX
Aqualight Waterborne UV shows the same high quality
properties of solvent borne systems or even exceeds
them, while at the same time being environmentally
friendly and easy to process.
Allows for LEEDs points!
33% Volume Solids
37% Weight Solids
VOC 14 g/l
Drying and Curing:
Flash off:
Drying oven:
IRM:
UV Curing:
Min. UV dose:
5-10 min. (86-95F)
5-10 min. (176)
60-80 sec., surf. Temp = (131-158F)
2 lamps (Mercury); 6 m/min
280-320 mj/cm2
Becker Acroma UV products and finish systems can be specifically tailored for use on most automated finish lines. Please contact
Becker Acroma or your local Becker Acroma distributor for specific product applications and standard operating procedures.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 79
Solvent Borne Pigmented UV Primer
Beckry Prime Pigmented UV
Primer UF1186-9105
Roller coat UV cured primer for the treatment
of non-porous substrates.
Allows for LEEDs points!
100% Volume Solids
Drying and Curing:
Flash off:
Drying oven:
UV Curing:
Min. UV dose:
5-10 min. (86-95F)
5-10 min. (122F)
2 lamps (1 mercury + 1 gallium); 6.5 m/min
300 mj/cm2
Becker Acroma UV products and finish systems can be specifically tailored for use on most automated finish lines. Please contact
Becker Acroma or your local Becker Acroma distributor for specific product applications and standard operating procedures.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 80
Solvent Borne Pigmented UV Topcoat
Beckry Top Pigmented UV
Topcoat UH1192-9105X
One pack UV cured solvent borne paint, for
top coating of primed furniture surfaces.
Allows for LEEDs points!
36% Volume Solids
47% Weight Solids
VOC 65 g/l
Drying and Curing:
Flash off:
Drying oven:
IRM:
UV Curing:
Min. UV dose:
5-10 min. (86-95F)
5-10 min. (122F)
60-80 sec., surf. Temp = (131-140F)
2 lamps (1 mercury + 1 gallium); 6.5 m/min
300-400 (UVB) + 700-800 (UVV)
Becker Acroma UV products and finish systems can be specifically tailored for use on most automated finish lines. Please contact
Becker Acroma or your local Becker Acroma distributor for specific product applications and standard operating procedures.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 81
Waterborne Pigmented 100% UV Primer
Aqualight Prime WB Pigmented UV
Primer LR10108
One pack UV cured waterborne paint, for priming of
sealed furniture surfaces.
Allows for LEEDs points!
36% Volume Solids
47% Weight Solids
VOC 65 g/l
Drying and Curing:
Flash off:
Drying oven:
UV Curing:
Min. UV dose:
5-10 min. (86-95F)
5-10 min. (122F)
2 lamps (1 mercury + 1 gallium);
6.5 m/min
300 mj/cm2
Becker Acroma UV products and finish systems can be specifically tailored for use on most automated finish lines. Please contact
Becker Acroma or your local Becker Acroma distributor for specific product applications and standard operating procedures.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 82
Waterborne Pigmented 100% UV Topcoat
Aqualight Top WB Pigmented UV
Topcoat LR59054
One pack UV cured waterborne paint, for top coating
of primed furniture surfaces.
Allows for LEEDs points!
28% Volume Solids
38% Weight Solids
VOC 67 g/l
Drying and Curing:
Flash off:
Drying oven:
IRM:
UV Curing:
Min. UV dose:
5-10 min. (86-95F)
5-10 min. (122F)
60-80 sec., surf. Temp = (131-140F)
2 lamps (1 mercury + 1 gallium);
6.5 m/min
300-400 (UVB) + 700-800 (UVV)
Becker Acroma UV products and finish systems can be specifically tailored for use on most automated finish lines. Please contact
Becker Acroma or your local Becker Acroma distributor for specific product applications and standard operating procedures.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 83
Solvent and Waterborne UV Technologies…
Endless Possibilities…
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 84
HYDROSHIELD EXTERIOR WATERBORNE FINISHES
Product Overview
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 85
Hydroshield Exterior Waterborne Coatings
Hydroshield Exterior Waterborne
Coatings
Exterior wood requires the highest protection
from the elements, as well as a beautiful finish;
our Hydroshield clear and pigmented coatings
do exactly this.
Developed in Italy by our team of specialized
chemists to withstand even the world’s harshest
climates, the Hydroshield product line is a high
performing waterborne exterior millwork coating
that offers long-lasting, high quality results
every time.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 86
Hydroshield Exterior Waterborne Coatings
Hydroshield Exterior Waterborne
Coatings
Strengths:
High Performance
Flexibility
A quality finish
Low environmental impact
Fast drying times
Easy application
Resistance to knotting
Wide product selection
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 87
Hydroshield Exterior Waterborne Coatings
Hydroshield Exterior Waterborne
Coatings
Becker Acroma’s Hydroshield products have
been successfully tested to meet the following
international standards:
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 88
Hydroshield Exterior Waterborne Coatings
EN927-3 Natural weathering test
EN927-4 Vapor absorption and desorption test
EN927-5 Liquid water permeability assessment
EN927-6 Resistance to UV and water
EN927-7 (ASTM G26-92) Assessment of knot
staining resistance of wood coatings
EN12720 Resistance to cold liquids
UNI9429 Cold test for surface finishes
EN4622 Pressure test for stackability
EN2409 Cross-cut test
ISO 3345 Determination of ultimate tensile stress
and percentage of lengthening
P.I. Certificate Durability against fungi
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 89
Hydroshield Exterior Waterborne Coatings
Five Year Guarantee
To demonstrate the products quality, Becker
Acroma, in cooperation with the Tuscan
Institute of Research, issues a certificate that
guarantees and proves the requirements for
production and performance.
Becker Acroma has certificates from the test
houses which confirm the results of all tests
mentioned. The Italian certificates are
applicable to all the transparent cycles.
For copies of these certificates please contact
Becker Acroma or your nearest Becker Acroma
distributor.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 90
Hydroshield Exterior Impregnating Agent
Impregnating Agent ED4405
Neutral products can be tinted with EZ4601
and EZ4602 pastes to create any color.
Hydroshield Impregnator does not contain
formaldehyde and has been given the MAS
Environmental “CERTIFIED GREEN”
approval for LEEDs projects.
14% Volume Solids
18% Weight Solids
Strengths:
Neutral multipurpose
Flexibility
Sprayable or Flow-coat
Contains fungicide/mildewcide
wood preservatives
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 91
Hydroshield Exterior Sealer
Clear Thixotropic Sealer EL4750
Neutral products can be tinted with
EZ4601 and EZ4602 pastes to create any color.
Hydroshield Sealer does not contain
formaldehyde and has been given the MAS
Environmental “CERTIFIEDGREEN”
approval for LEEDs projects.
29% Volume Solids
36% Weight Solids
Strengths:
Sprayable
Easy sanding
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 92
Hydroshield Exterior Topcoat
Clear Thixotropic Topcoat EM4637
Neutral products can be tinted with
EZ4601 and EZ4602 pastes to create any color.
Hydroshield Topcoat does not contain
formaldehyde and has been given the MAS
Environmental “CERTIFIED GREEN”
approval for LEEDs projects.
32% Volume Solids
38% Weight Solids
Strengths:
Sprayable
Easy sanding
Use as self sealing
Tint with 0.1-1% with EZ4601 or
EZ4602 pastes for UV resistance
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 93
Hydroshield Exterior Pigmented Primer
White Thixotropic Primer
ED4610-9001
White products can be tinted with EZ44520
pastes to create any solid color. Hydroshield
Pigmented Primer does not contain
formaldehyde and has been given the MAS
Environmental “CERTIFIED GREEN”
approval for LEEDs projects.
49% Volume Solids
54% Weight Solids
Strengths:
Sprayable
Easy sanding
Tint with 20% with EZ4520
pastes for any color
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 94
Hydroshield Exterior Pigmented Topcoat
White Thixotropic Topcoat
ED4467-9001
White products can be tinted with EZ44520
pastes to create any solid color. Hydroshield
Pigmented Topcoat does not contain
formaldehyde and has been given the MAS
Environmental “CERTIFIED GREEN”
approval for LEEDs projects.
45% Volume Solids
49% Weight Solids
Strengths:
Sprayable
Easy sanding
Tint with 20% with EZ4520
pastes for any color
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 95
It’s in our nature…
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 96
It’s in our nature…
4.2 Materials and Resources (on site applied):
- Akvaline Clears, Laqva Prime LV, Akvatopp
White, Aqua Chroma Spray Stains, Aqualux Wipe
Stains, Aqualux Neutral, Hydroshield.
4.5 Indoor Air Quality - requires testing of the
entire end product:
- Aqualight UV, Beckry, Uvett, Akvaline Clears
(212 and 215), Laqva Prime White, Akvatopp
White, Hydra Glaze, Eco Blend Spray and Wipe
Stains, Hydroshield, Italian Polyurethane
Products.
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 97
It’s in our nature…
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 98
It’s in our nature…
…to provide GREEN
solutions for the global
wood finishing industry
Pre and Post Catalyzed Finishes / Stains / Dyes / Glazes | Page 99
BECKER ACROMA & PAINT
Fine Finishes
LACQUER CO.