TWIN RECEIVER PROGRESS OF INSTALLATION
!!! WARNING : Please read this user guide manual before the using
receiver.
1.
How can we input data satellite and receiver satellite setting?
2.
Using multifeed for the data satellite how we figure out dish connection ?
3.
How we use favorite channel menu?
Important Note : When you use data satellite while receiver under EMU ON
functions ,you must push to zero key four times on the remote control and close
EMU ON and turn on EMU OFF.
If you open EMU OFF function ,then receiver will work faster.
How we must do data satellite and receiver satellite
setting?
Turksat
Hotbird
Astra
Hellas
Eurobird 33 degree
or
Eutelsat w6 21.6 degree
Diseqc switch
Data tuner
input
Twin tuner input
Receiver tuner
input
Data Tuner Input
Receiver discrambled the coded channels while
connecting data input tuner.
Data communication is made by two satellite.
a) Eurobird satellite or,
b) Eutelsat w6 satellite
You must select of dish antenna from which satellite
get data. Then you enter KEY code at first line on the
BISS menu.
a)
b)
Reference for Eurobird satellite
You can use below frequency for setting your dish.
“11110mhz, Horizental, 3124 symbol rate ”.
33 degree Eurobird satellite are between Turksat
and Astra Satellite.
After you set up to Eurobird satellite dish , you connect
“Data Tuner Input”.
For using key code is below to Eurobird satellite.
1A 19 AC 37 50 71 76 1B 09 1B 1A BA 8E 18 72 0E
For Eurobird satellite , frequency must
be on first line of BISS Key.
Reference for Eutelsat W6 21.6 degree
satellite.
You can use below frequency for setting your
dish .
“11325mhz, Vertical, 30.000 symbol rate”.
Key code for Eutelsat w6
A7 A7 70 BA C6 CC CB A7 B0 A9 A7 07 33 A7
28 E6
ATTENTION :
To edit the key values please push the RED button on
the RCU end enter the keys for the satellite
which you want to use for data download.
For Eutelsat w6 satellite , frequen
must be on first of BISS key.
Using multifeed for Data Tuner Input without additional
dish
When you use multifeed for Turksat and Eurobird or
Hotbird and W6 satellite ,you can set up only 1 dish
as picture.
To get data from Eurobird satellite ,you must focus
your dish to Eurobird. After than using multifeed, you
can set up Turksat satellite .
Also you can follow same procedure for Eutelsat W6
data satellite.
Turksat
LNB
How we can use favorite channel menu ?
You can see the Channels, which you want
to watch on the satellite receiver on the
Favorite Channel List as a group.
When you press FAV key on remote
control,then FAV menu will open in the
screen as picture. When you choose the
group which you want on the menu , then
you can see those channel list .Then you
can select channel by OK button. You can
watch that channel..
Eurobird
LNB