API 16 AR Specification for Drillthrough Equipment Remanufacturing
Winter Standards Meeting Communication
Jan van Wijk / Chris Johnson
API-16AR chairman
Janvanwijk@Shell.com / Chris.Johnson@nov.com
21 January , 2014
1
Contents of the meeting
The purpose of this presentation is to inform you of the:
– Purpose of the standard
– What did we deliver in 2013
– What must be delivered in 2014
– Timing of the document
– Meetings,
– What are we going to do today,
– End of meeting
1220 L Street, NW • Washington, DC 20005-4070 • www.api.org
2
Purpose of the standard.
The purpose of this document is to provide
clarity and guidance for the purpose of
repair and remanufacturing of Drill Through
Equipment. This Standard will provide
minimum requirements and will be in
alignment with API 16A and S53.
1220 L Street, NW • Washington, DC 20005-4070 • www.api.org
3
What did we deliver in 2013
•
•
•
•
•
•
Non negotiable list (entry level for repair/remanufacturing) content
completed in the 12 Nov meeting.
Finalized content of Manufacturing Data book and Project history File,
which are added to the API-16A and API-16AR Standard as an Annex.
Finalized content of Annex-C showing the engineering ownership of the
assembly (API-53 STD OEM definition).
Completed content of Quality Control chapter, including RSL levels 1-3
Completed content of QMS system requirements.
Completed responsibility chapter.
1220 L Street, NW • Washington, DC 20005-4070 • www.api.org
4
What is must be done in 2014
• Update references
• Update abbreviations
• Write nonnegotiable list (entry level RSL-1)
minimum requirements chapter.
• Write welding chapter
• Write certification chapter
• Add Annex for certification examples.
1220 L Street, NW • Washington, DC 20005-4070 • www.api.org
5
Timing 16AR document
• Final draft document End February 2014.
• Final editing starting March 2014.
• Document out for ballot end Q2-2014.
1220 L Street, NW • Washington, DC 20005-4070 • www.api.org
6
Meetings
• Weekly meeting for cortication every Tuesday from
16:00-17:00 hrs Houston time, starting next week.
• 3rd week of February: 2-3 day workshop to
complete welding chapter.
• Welding group weekly meeting every Friday 16:0017:00 hrs Houston time, starting next week.
• API-16AR group meeting in Houston TIEC end
March.
1220 L Street, NW • Washington, DC 20005-4070 • www.api.org
7
What are we going to work on today
• TPI requirements
• Who is OEM
• Remanufacturing Service Levels based on API-16A
quality requirements. Alignment in order to progress.
• Certification
• Welding
• Integration Life Cycle Management.
1220 L Street, NW • Washington, DC 20005-4070 • www.api.org
8
TPI in API-16AR
If Third Party Inspection is used, the following applies:
Third Party Inspectors (TPI) shall be competent based on the
appropriate education, training, skills and experience needed to
perform the inspection service and certification related product
requirements defined in the inspection scope.
Evidence of the determination of competence of TPI personnel shall be
recorded and maintained by the TPI company in accordance with
their QMS documented procedures and requirements for
competence.
The TPI scope shall be clearly defined in the purchase order by the
client.
The TPI requirements defined in the purchase order shall be included in
the Inspection Test Plan for the product.
Certification shall be approved by a Recognized Technical Authority.
1220 L Street, NW • Washington, DC 20005-4070 • www.api.org
9
OEM
1220 L Street, NW • Washington, DC 20005-4070 • www.api.org
10
RSL levels
• RSL levels are based on API-16A chapter 8.4 and 8.5
quality requirements.
1220 L Street, NW • Washington, DC 20005-4070 • www.api.org
11
Certification
•
•
•
Adding the transparency and the
requirements
• Certificate of Conformance
• Certificate of Compliance
• Certificate of service
• Certificate of compatibility
• Statement of Fact
Providing a recognized certification
document, traceable by API-16AR
registration number.
Use of ISO/IEC 17050-1 and -2 to create
API version.
1220 L Street, NW • Washington, DC 20005-4070 • www.api.org
12
COC examples
1220 L Street, NW • Washington, DC 20005-4070 • www.api.org
13
Integration in LCM
• Documentation requirements
• Transparency to API-16A conformance through
remanufacturing levels.
• Quality through QMS and certification
1220 L Street, NW • Washington, DC 20005-4070 • www.api.org
14