QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW Quincy Rotary Screw Air Compressor QSI 200-280kW QUINCY COMPRESSOR – USA Q-TECH AIR SYSTEM TECHNOLOGY LTD QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW QSI 200-280KW Model QSI 200 QSI 250 QSI 280 Full Load Drive Motor KW 200 250 280 7bar 37.7 46.2 50.4 8bar 37.4 45.6 50.2 10bar 34.3 36.9 - 7 & 8bar 321 321 321 10bar 321 255 - Capacity m³/min Rotor Diameter mm QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW Inlet Air System Heavy Duty Inlet Filter The unique tangential inlet flow design first uses centrifugal separation and throws the larger particles against the walls of the filter housing, hence removing them in the first stage separation prior to the filter element. The remaining dust particles are then removed via a 3 micron filter element and the inlet air is effectively filtered before being compressed. QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW Inlet Air System Quincy Positive Closure Inlet Valve Capable of modulation with capacity range of 20 – 100 %, which is higher than machines of similar competing lines. The wide modulation band ensures stable pressure in air supply, reduces energy consumption due to varying load changes and extends the life of the motor. The positive closure inlet valve is able to close totally. During unload, air enters the airend from the bypass valve. If there is a sudden loss of supply power or in the event of emergency stop, the inlet valve completely closes and prevents a fluid backflow. The inlet valve operates using pressure from the reservoir and makes operation stable and reliable. QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW The Quincy Airend Axial Flow Inlet The directional flow inlet housing chambers the air flow towards the rotor housing in an axial direction, reducing turbulence that would cause an increase in temperature of inlet air. Drawing air into a chamber ahead of the rotors allows the full length of the rotor to be used. The result is improved efficiency by 5% to 7% over traditional radial flow designs. QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW The QUINCY Airend Oversized Rotors High Efficiency, Lower Power Consumption, Airend Life of 100,000 hours QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW The QUINCY Airend Oversized Bearings Oversized bearings last longer. Discharge end triplex tapered roller bearings for stable operation and increased compressor life. QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW The QUINCY Airend Airend Shaft Seal Triple lip PTFE shaft seal assembly Outer dust seal protects the triple lip seal and forms a scavenge cavity. Scavenge cavity is linked to the inlet valve via a return line and the vacuum ensures no fluid leakage. The scavenge line is equipped with a check valve that prevents any fluid from following from the airend to the scavenge cavity when compressor is shut down. QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW Drive Train 380V/3P/50Hz IP54(TEFC) motor from renowned Chinese manufacturer. Direct drive, no belts/gears/coupling, hence no transmission losses. Flexible dropout coupling. Stable reliable operation. QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW Electronics & Controls Main Electronic & Control Components Wye-Delta reduced voltage starters and electronic components are SIEMENS branded components. Quality is assured. PLC based controller uses standard SIEMENS industrial PLC. Reliable and expandable for integration with plant network communication. QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW Electronics & Controls HMI & Control Capabilities Uses SIEMENS TD400 HMI,dual language display,user-friendly interface Logic control of dryer Wye-Delta starter is standard. Capacity control options: modulation auto/dual,continuous run,network(6 machines) Network control mode ID assigned System date and time display. Total running and loaded hours operation display Continuous monitoring of temperature and pressure Service timings programmed and display Fault alarm display. Preset time for motor shutdown in auto/dual mode. Auto-restart with programmable time delay Fault alarm log with time and fault type Operating and alarm parameters with password protection Industrial standard PLC, expandable and supports Profibus and other communications network. QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW Fluid/Air Separation System Uniquely designed fluid/air separation system, it features a one-piece twostage dual separator integrated design with two scavenging line systems. Oil carryover is as low as 3ppm. QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW Lubrication System Quincy high efficiency glass microfibre fluid filter is designed for full flow for total protection. Imported high quality thermal control valve ensures operating conditions are stable and constant. QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW Lubrication System Uses Quincy QuinSyn line of synthetic fluids - standard factory fill being QuinSyn- PLUS fully synthetic fluid Varnish free operation High viscosity index Excellent corrosion protection Water holding capability Efficient cooling QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW Cooling System Air Cooled as Standard Generously sized coolers ensure reliable operation in ambient temperatures as high as 46℃. Aftercooler approach temperature as low as 8℃. Fitted with moisture separator as standard for 99.9% removal of bulk water. Water cooled option. QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW Cooling System Moisture Separator Imported premium quality moisture separator. Centrifugal moisture separator removes 99.9% of bulk water. Fitted with manual and automatic drain valves. QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW Piping System Air piping joints are flange connected. Flexible hose is suitably used where required. Leak-free and fuss-free installation/dismantling. Oil piping uses steel pipes, layout is neat. Stable and reliable. SAE “O”-ring fittings provide the most reliable sealing at joints QUINCY ROTARY SCREW AIR COMPRESSOR QSI 200-280kW Thank You! QUINCY COMPRESSOR – USA Q-TECH AIR SYSTEM TECHNOLOGY LTD