ELECTRICAL CIRCUITS
MIND MAP
EEE course syllabus mind map | DC foundations, transients and sinusoidal AC
1
RESISTANCE
RT = R1 + R2 + …
;
5
R
1/RT = 1/R1 + 1/R2 + …
METHODS OF ANALYSIS
VS series R
Properties: opposition to current; unit ohm (Ω).
↔
A
IS = VS/R parallel R
Current sources: parallel currents add; source
conversion.
Types: fixed, variable, thermistor and LDR.
Branch-current, mesh (KVL) and nodal (KCL)
methods.
Series and parallel resistor networks.
Reduce-return, ladder, bridge and Y-Δ
conversions.
6
NETWORK THEOREMS
VTH = VOC
2
OHM'S LAW, POWER & ENERGY
;
IN = ISC
;
T
RN = RTH
;
max P: RL = RTH
V
Superposition: one independent source at a time.
V = IR
;
P = VI = I2R = V2/R
;
Rth
Thevenin, Norton, Millman, substitution and
reciprocity.
η = Pout/Pin × 100%
Ohm's Law links voltage, current and resistance.
Vth
V
RL
Find equivalent circuit seen by the load.
Power ratings prevent overheating; energy in J or
Wh.
R
Efficiency measures useful output.
7
CAPACITORS
C = Q/V
ELECTRICAL
CIRCUITS
;
C
W = ½CV2
;
CP = ΣC
;
1/CS = Σ(1/C)
Electric field, dielectric strength, leakage and
types.
+
−
Charging/discharging phases; series and parallel
banks.
3
SERIES DC CIRCUITS
VX = VT(RX/RT)
;
PX = I2RX
;
S
Energy stored in electric field.
%Reg = (VNL − VFL)/VFL
× 100%
8
Same current; use KVL: ΣV = 0.
INDUCTORS
e = −L(di/dt)
Voltage divider, power distribution and
regulation.
;
L
W = ½LI2
;
τRL = L/R
Magnetic field; air, ferrite and iron-core
inductors.
Voltage sources in series combine algebraically.
Faraday's and Lenz's laws; series/parallel
inductors.
R-L, R-C and R-L-C circuits with DC input.
9
4
PARALLEL DC CIRCUITS
G = 1/R
;
GT = ΣG
;
P
IX = ITRother/(RX+Rother)
SINUSOIDAL AC WAVEFORMS
v(t) = VMsin(ωt+φ)
;
ZR=R, ZL=jωL, ZC=1/(jωC)
P=VRMSIRMScosφ
Same voltage; use KCL: ΣIin = ΣIout.
Definitions, phase relations and R-L-C frequency
response.
Conductance, current divider, open and short
circuits.
Rectangular/polar form and phasors; average
power factor.
Parallel voltage sources must be compatible.
R: 0°, L: +90°, C: −90° phase relation.
Notation: V voltage | I current | R resistance | P power | E/W energy | f frequency | ω angular frequency
AC
;