SPACECLAIM
25 December 2022
14:27
1.REPAIR -> Stitch Command = Some edges are not linedup or overlapping , This Option picksup the gaps in the edges
and Sttches those edges .
REPAIR - Split edge -> these edges find out the edges which do merge in new or adjacent faces.
2. To simplify the analysis the Geomentry shold be simplified . Lets say when a suspensions are connected to the a
chassis , then the torsional loads are applied on the surface of the body to which the suspension is connected ,
here we can neglect the Suspension in the analysis but if we want the correct portion of the surface to which the
suspension is attached then we wanted to use Imprint command from the Prepare tab
PREPARE -> Imprint = this option will find the surfaces on one which are attached to the two different bodies .
Here This Option will replicate surface dimensions in the Body , Lets say when a suspension is attached to the
body then the suspension attached portion is replicated in the body to which we can apply the forces .
3.
Shortcuts :
1. Alt+Enter = Select any specific function in the pull Operations
2. H - Zoom Out to Original view
3. In Move Command For Duplicating - Select the Object -> Cltr -> Move the Object -> A Duplicated
Object will be created .
4. F = Shortcut key for Fill command
ANSYS LEARNING FORUM STUDIES Page 1
REFER -> 4-3-23 -> ANSYS File .