CR 56XX ATM Training Guide __________________________________________________________________________________ Section 2: Error Status Message Reference Any time an error or change of status occurs at an NCR ATM, an error status message is generated. This messages is formatted and sent to the ATM Network where the help desk operators can view the message and act upon it accordingly. In addition to the message being sent to the network, it is also printed on the journal printer of the ATM. This message can indicate a variety of information, such as what device created the error condition (ex. currency dispenser)and what impact it may have had on the customer transaction. The message also indicates whether the error was a result of a function that the ATM performed on its own (unsolicited status) or that it was caused by an action directed by the ATM network (solicited status). This information can be beneficial when investigating balancing or customer discrepancies. The Fourth Generation NCR ATMs (56XX models) utilize the same status messages used on the Third Generation machines (50XX models). In addition, the 56XX ATMs, given their enhanced message reporting capabilities, report some additional error status messages. The following section breaks down the format of the error status messages as printed on the journal tape and lists their interpretations. Please note that these status messages, when sent to the ATM network, are translated and logged to the networks error log reports. Your network customer service representative may also be able to provide the network interpretation of the message and the impact it may have had on a particular transaction. NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 1 CR 56XX ATM Training Guide __________________________________________________________________________________ Status Message Format Each status message is broken down into specific fields that together describe the error condition or status change that occurred at the ATM. The following diagrams explain the error message format and the definition of each field within the message. Error Status Message Format tttt * m * d * aa.a, M-bb, R-c Supplies Status Transaction Serial Number Transaction / Device Device Code Message Status Type A=Time of Day Clock B=Power Failure C=Card Reader/Writer E=Cash Dispenser F=Depository G=Receipt Printer H=Journal Printer J=Vandal Guard K=Night Safe L=Encryptor M=Camera P=Sensor R=Supervisor V=Statement Printer NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 2 Diagnostic Module Status CR 56XX ATM Training Guide __________________________________________________________________________________ Error Status Message Format Description tttt*m*d*aa.a,M-bb,R-c Transaction Serial Number (tttt) - This is a four digit number (in the range of 0001 - 9999) that indicates the customer transaction affected by the error status. Message Status Type (m)- this is a one digit number that has two possible values: 1 = a message was sent by the ATM but not requested by the network computer indicating that it is an Unsolicited status. 2 = a command was sent to the ATM and it responded with the error message, indicating that the host Solicited the status. Device Code (d) - this code will always appear as a single alpha character in caps. It will identify the hardware device that created the status message. Transaction/Device Status (aa.a) - this code will be from one to thirteen digits in length. It will give information pertaining to the approval or denial of the customer transaction that took place when the error status message occurred. Diagnostics Module Status (M-bb) - this is a 2-digit number that gives a more detailed explanation of the error condition the affected hardware device experienced at the time of the error status. These numbers always appear after the “M-” in that actual status message. Supply Status (R-c) - this is a one to five digit number that will explain the status of the currency, paper, or capture bins in the ATM. NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 3 CR 56XX ATM Training Guide __________________________________________________________________________________ Device Status Value Definitions The following pages provide a detailed description of the individual status messages that are produced for the various devices in the ATM. (Only the status messages that pertain to the 56XX model ATMs as equipped for Mellon Bank are referenced.) Refer to the guide on the previous page for the definition of the fields that comprise the individual status codes. The fields within each device are color coded in accordance with the format described on the reference guide. Please note that many of the error conditions will not display during normal operation. These error conditions will only be produced as a result of diagnostic testing. Device Code A = Time of Day Clock Format = *tttt*m*A*a Field Specifics *tttt*m*A*a a = Device Status Possible Values for "a": 1 = Clock reset but running 2 = Clock Stopped Example: Interpretation: *1234*1*A*2 During transaction number "1234", the ATM generated its own unsolicited status message (1) from the Time of Day Clock (A) indicating that the clock has stopped (2). Device Code B = Power Failure Format = *tttt*m*B*aaaa Field Specifics *tttt*m*B*aaaa aaaa = Configuration ID (Network Services assigned terminal group number) Example: Interpretation: *1234*1*B*0011 After transaction number "1234", the ATM generated its own unsolicited status message (1) after encountering a Power Failure (B). The message also indicates that the ATM was loaded with terminal group "0011" as assigned by Network Services. NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 4 CR 56XX ATM Training Guide __________________________________________________________________________________ Device Code D = Card Reader / Writer Format = *tttt*m*D*a, M-bb, R-c Field Specifics *tttt*m*D*a, M-bb, R-c a = Transaction / Device Status Possible Values for "a": 0 - Minor problem, refer to "bb" and "c" data status and supply changes 1 - Cardholder did not take his card within the allotted time and it was captured or jammed 2 - Eject failure, card captured or jammed 3 - Failed to write on Track 3 of the card 4 - Invalid Track 3 data sent from network Field Specifics *tttt*m*D*a, M-bb, R-c bb = Module Status Possible Values for "bb": 00 - Operation successful 01 - Blank track 02 - Track not supported 03 - Read error 04 - Write error 05 - No card in reader at start of command 06 - Card removed by customer during capture 07 - Shutter jammed open 08 - Shutter switch failure detected 09 - Error recovery successful 10 - Shutter jammed closed 11 - Card jammed (not during capture) 12 - Card captured after unsuccessful eject operation 13 - Possible customer tampering, card stuck in card reader throat 14 - Too many consecutive read errors or blank tracks 15 - Too many consecutive write errors 16 - Too many consecutive card jams 17 - Too many consecutive shutter jammed closed status's 18 - Card jam during capture 19 - Too many consecutive invalid cards 20 - Device still inoperable NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 5 CR 56XX ATM Training Guide __________________________________________________________________________________ Device Code D = Card Reader / Writer (continued) 21 - No card entered during cleaning cycle test 22 - Speed out of specification > +3% 23 - Speed within +3% 24 - Speed within +/- 1% 25 - Speed within -3% 26 - Speed out of specification < -3% 27 - Invalid card detected (diagnostic only) 37 - Card Return on Power Failure option not supported 38 - Tamper Indicating Card Capture bin full 39 - Tamper Indicating Card Capture bin shutter mechanism failure 40 - Tamper Indicating Card Capture bin removed or not configured 41 - Card Return on Power Failure option failed 146 - SDC link failure Field Specifics *tttt*m*D*a, M-bb, R-c c = Supply Status Possible Values for "c": 0 - No new state 1 - Card capture bin is not overfilled 4 - Card capture bin is overfilled Example: *1234*2*D*2, M-11, R-1 Interpretation: During transaction number "1234", the ATM generated a solicited status message (2) resulting from the network telling the ATM to return the card to the customer. The card reader (D) failed in its attempt to eject the card (2) and the card became jammed in the card reader (M-11). In addition to this information, the status indicated that the card capture bin is not overfilled (R-1). NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 6 CR 56XX ATM Training Guide __________________________________________________________________________________ Device Code E = Currency Dispenser Format = *tttt*m*E*aaaaaaaaa, M-bb, R-ccccc Field Specifics *tttt*m*E*aaaaaaaaa, M-bb, R-ccccc aaaaaaaaa = Transaction / Device Status (This field describes what happened during the transaction using the first digit of the field and how many bills were dispensed from each currency cassette using the remaining 8 digits of the field.) Possible values for each digit of "a aa aa aa aa": a aa aa aa aa Character 1 - This character, known as the transaction code, descibes what happened during the dispense operation. Character 2 & 3 Number of bills dispensed from currency cassette #1 Character 5 & 6 Number of bills dispensed from currency cassette #3 Possible values for Character 1: 0 - The dispense operation was successful but some exception condition was encountered. 1 - Less bills were dispensed than were requested. 2 - No bills were dispensed. 3 - A faulty dispense occurred and the quantity of bills dispensed is unknown. 4 - No bills were dispensed or the card was not ejected before bills were dispensed. 5 - Some or all bills were not taken by cardholder and some or all bills were retracted into the reject bin. NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 Character 3 & 4 Number of bills dispensed from currency cassette #2 7 Character 7 & 8 Number of bills dispensed from currency cassette #4 CR 56XX ATM Training Guide __________________________________________________________________________________ Device Code E = Currency Dispenser (continued) Field Specifics *tttt*m*E*aaaaaaaaa, M-bb, R-ccccc bb = Module Status Possible values for "bb": 00 - No error 01 - Pick requested from cassette that is not installed 02 - Too many bills being rejected 03 - Pick failure 04 - Pick failure from cassette low or out of currency 05 - Sensor failure or currency jammed 06 - Divert gate failure 07 - Reject bin not present 08 - Reject bin overfilled or sensor blocked 09 - Communications failure at dispenser 10 - Operation not attempted due to previous failure 11 - Bills still in transport, operation not attempted 12 - Presenter mechanism failed or jammed 13 - Exit shutter jammed open 14 - Exit shutter jammed closed 15 - Bills observed passing overfill sensor 16 - Main transport timing disk or main AC motor failed 17 - Exit sensor failed to clear or is blocked 18 - Currency jam in presenter transport or sensor failed 19 - Exit sensor blocked (bills may be in exit slot) 20 - Dispenser not configured 21 - Security violation 22 - Security inhibition 25 - Flex disk authorization not required 28 - An area of NVRAM cannot be accessed (SOH cannot be updated) 29 - Presenter transport timing disk or motor failure 30 - Presenter transport sensors blocked or failed 32 - Heartbeat on execution processor failed (80652) 33 - Communication failure on the I2C bus (80852) 34 - A present notes operation has been attempted without any notes being stacked or a retract operation has been attempted without notes having been presented 35 - Operation incomplete due to power disconnection resulting from the interlock on the ATM access door being tripped 36 - Pick valve test not attempted because cassettes were installed 37 - Tamper Indicating service switched ON 38 - Tamper Indicating service switched OFF 39 - LVDT or associated circuitry malfunctioning 40 - Note parameters not configured because of an NVRAM corruption or it is the first operation since initial power-up 41 - An attempt was made to pick from a cassette which has been disabled for in-service replenishment 146- SDC link failure NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 8 CR 56XX ATM Training Guide __________________________________________________________________________________ Device Code E = Currency Dispenser (continued) Field Specifics *tttt*m*E*aaaaaaaaa, M-bb, R-ccccc ccccc = Supply Status (This 5-digit supply field describes the state of the currency reject bin and each of the currency cassettes.) Description and possible values for "ccccc": c cccc Character 1-describes the status of the divert bin 1 = Divert bin not overfilled 4 = Divert bin is overfilled Characters 2-3-4-5 -describe the supply status of currency cassettes 1-2-3-4. 0 = No new status 1 = Sufficient bill supply 2 = Bills low 3 = Bills out Example: *1234*2*E*101010000,M-04,R-13100 (In this example, the customer requested $50 but only received $30) Interpretation: As a result of transaction 1234 where the host directed the ATM (2) to dispense currency (in this case 2 - $20 bills and 1 - $10 bill), the currency dispenser (E) encountered a pick failure while attempting to get bills from a cassette that was low on currency (M-04). The transaction status (101010000) indicates that less bills were dispensed than were requested (digit 1 = 1), one bill was dispensed from currency cassette 1 (digits 2&3 = 01) and one bill from currency cassette 2 (digits 3 & 4 = 01). The supply status (R-13100)determines that the reject bin is not full (digit 1 = 1), currency cassette 1 is out of bills (digit 2 = 3) and currency cassette 2 has a sufficient bill supply (digit 3 = 1). NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 9 CR 56XX ATM Training Guide __________________________________________________________________________________ Device Code F = Depository Format = *tttt*m*F*a, M-bb, R-c Field Specifics *tttt*m*F*a, M-bb, R-c a = Transaction / Device Status Possible values for "a": 0 - Successful operation, but an exception condition was encountered 1 - Customer did not insert the envelope in the allotted time 2 - Failure to enable mechanism for a deposit 3 - Deposit failed, customer has access to the envelope 4 - Deposit failed, envelope is in the ATM and the customer does not have access to it Field Specifics *tttt*m*F*a, M-bb, R-c bb = Module Status Possible values for "bb": 0 - No error 1 - Transport jam 2 - Transport jammed and shutter jammed open 3 - Transport jammed and shutter jammed closed 4 - Shutter jammed open 5 - Shutter jammed closed 6 - Transport sensor failed 7 - Depository communication failure 11- Depository bin overfill 13 - Timing disk failure 14 - A failure has occurred in the control electronics 15 - Transport motor failure 50 - Anti fishing sensor not returned 51 - Lost depository print characters due to transport speed (incomplete envelope printing) 52 - Printhead removed 55 - Interlock failed 146 - SDC link failure Field Specifics *tttt*m*F*a, M-bb, R-c c = Supply Status Possible values for "c": 0 - No envelope deposited 1 - The depository bin is not overfilled 4 - The depository bin is experiencing an overfill condition NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 10 CR 56XX ATM Training Guide __________________________________________________________________________________ Device Code F = Depository (continued) Example: *1234*2*F*4, M-01, R-1 Interpretation: In transaction (1234), the host directed the ATM (2)to accept a deposit (F), but the deposit failed and the customer does not have access to the envelope (4) due to a transport jam (M-01). The supply status indicates that the depository bin is not overfilled (R-1). Device Code G = Receipt Printer Format = *tttt*m*G*a, M-bb, R-cccc Field Specifics *tttt*m*G*a, M-bb, R-cccc a = Transaction / Device Status Possible values for "a": 0 - Successful print 1 - Print not successfully completed 2 - Device not configured Field Specifics *tttt*m*G*a, M-bb, R-cccc bb = Module Status Possible values for "bb": 00 - No error 01 - Head jam/Knife jam 03 - Black mark error 05 - Paper out 07 - Paper not loaded or paper jam before transport 08 - Communications failure to the printer 09 - Printer open 10 - Ribbon needs to be replaced soon 11 - Printhead needs to be replaced soon 12 - Knife needs to be replaced soon 13 - Ribbon needs to be replaced now 14 - Printhead needs to be replaced now 15 - Sideways communications error 16 - Eject jam 146- SDC link failure NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 11 CR 56XX ATM Training Guide __________________________________________________________________________________ Device Code G = Receipt Printer (continued) Field Specifics *tttt*m*G*a, M-bb, R-cccc cccc = Supply Status (This 4-digit field contains multiple values for each character) Description and possible values for "cccc": cccc Character 1 Paper Status: 1 = Sufficient Paper 2 = Paper Low 3 = Paper Out Character 2 Ribbon Status: 1 = Ribbon OK 2 = Replace Ribbon Character 3 Printhead Status: 1 = Printhead OK 2 = Replace Printhead Character 4 Knife Status: 1 = Knife OK 2 = Replace Knife Example: *1234*1*G*1, M-05, R-3111 Interpretation: In transaction (1234), the ATM attempted (1) to print a customer receipt on the receipt printer (G) but was unsuccessful in its attempt (1) as the printer was out of paper (M-05). The supply status (R-3111) echoed the fact that paper was out (digit 1) and also that the ribbon (digit 2), printhead (digit 3) and the paper cutting knife (digit 4) were all OK. Device Code H = Journal Printer Format = *tttt*m*H*a, M-bb, R-ccc Field Specifics *tttt*m*H*a, M-bb, R-ccc a = Transaction / Device Status Possible values for "a": 0 - Successful print 1 - Print not successfully completed 2 - Device not configured NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 12 CR 56XX ATM Training Guide __________________________________________________________________________________ Device Code H = Journal Printer (continued) Field Specifics *tttt*m*G*a, M-bb, R-ccc bb = Module Status Possible values for "bb": 00 - No error 01 - Head jam 05 - Paper out 07 - Paper not loaded 08 - Communications failure to the printer 09 - Printer open 10 - Ribbon needs to be replaced soon 11 - Printhead needs to be replaced soon 13 - Ribbon needs to be replaced now 14 - Printhead needs to be replaced now 146- SDC link failure Field Specifics *tttt*m*G*a, M-bb, R-ccc ccc = Supply Status (This 3-digit field contains multiple values for each character) Description and possible values for "ccc": ccc Character 1 Paper Status: 1 = Sufficient Paper 2 = Paper Low 3 = Paper Out Character 2 Ribbon Status: 1 = Ribbon OK 2 = Replace Ribbon Character 3 Printhead Status: 1 = Printhead OK 2 = Replace Printhead Example: *1234*1*H*1, M-05, R-311 Interpretation: In transaction (1234), the ATM attempted (1) to print information on the journal printer (H) but was unsuccessful in its attempt (1) as the printer was out of paper (M-05). The supply status (R-311) echoed the fact that paper was out (digit 1) and also that both the ribbon (digit 2) and the printhead (digit 3) were both OK. NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 13 CR 56XX ATM Training Guide __________________________________________________________________________________ Device Code L = Encryptor Format = *tttt*m*L*a, M-bb Field Specifics *tttt*m*L*a, M-bb a = Transaction / Device Status Possible values for "a": 1 - Encryptor error 2 - Encryptor not configured bb = Module Status Possible values for "bb": 00 - No error detected 01 - Parity error 02 - Hardware error 03 - Invalid command, not all key spaces are closed 04 - Invalid command, no key space open 05 - Invalid command as keyboard is currently enabled 07 - Communications failure 08 - Security module reset was successful 11 - Invalid command data 12 - Data mismatch 13 - No key loaded in Data Encryption Unit prior to encryption or decryption request 12 - Data mismatch 70 - PIN verification failed 74 - Invalid PIN encrypt type function (encryption mode changed) 75 - Key integrity error 76 - Invalid PIN, no encryption allowed (truncated PIN does not contain decimal digits) 97 - Timeout error 98 - Communications error 146 - SDC link failure **Note - several additional Module Status error values exist in the range 15 - 66 that apply to programmer level individuals and would be recorded on the network BLF listing** Example: *1234*1*L*1, M-04 Interpretation: In transaction (1234), the ATM attempted (1) to encrypt (L) data (the customer PIN) but an encryptor error occurred (1) as a result of the DES key not being installed (M-04). This would generally require a technician to come to the machine to re-enter the DES keys. NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 14 CR 56XX ATM Training Guide __________________________________________________________________________________ Device Code P = Sensors Format = *tttt*m*P*aaaaaaaaaaaaa Field Specifics *tttt*m*P*aaaaaaaaaaaaa aaaaaaaaaaaaa = Device Status (There are distinct values for each of the 13 characters represented in the Device Status codes referencing Sensors. The following descriptions and values define each character beginning with the first, character 1.) Description and possible values for each character of "aaaaaaaaaaaaa": Character 1 1 - Tamper Indicating sensor change * 2 - Mode switch change (the Mode Switch is the Normal/Supervisor switch on the operator panel) ** 3 - Alarm state change * Character 2 0 - Mode switch moved to NORMAL 1 - Mode switch moved to SUPERVISOR Character 3 0 - Vibration and/or heat sensor inactive 1 - Vibration and/or heat sensor active Character 4 0 - Door contact sensor inactive 1 - Door contact sensor active Character 5 0 - Silent signal sensor inactive 1 - Silent signal sensor active Character 6 0 - Electronics enclosure sensor inactive 1 - Electronics enclosure sensor active Character 7 0 - Deposit bin in 1 - Deposit bin out Character 8 0 - Card capture bin out 1 - Card capture bin in Character 9 0 - Currency reject bin out 1 - Currency reject bin in * If Character 1 = "1" (Tamper Indicating sensor change) or "3" (Alarm state change), then Character 2 is not applicable and Characters 3 thru 13 provide details describing the Tamper Indicating or Alarm status. ** If Character 1 = "2" (Mode switch change), then Character 2 provides the details concerning the mode switch and Characters 3 thru 13 will be omitted. NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 15 CR 56XX ATM Training Guide __________________________________________________________________________________ Device Code P = Sensors (continued) Character 10 0 - Currency cassette in position 1 out (top) 1 - Currency cassette in position 1 in Character 11 0 - Currency cassette in position 2 out (second) 1 - Currency cassette in position 2 in Character 12 0 - Currency cassette in position 3 out (third) 1 - Currency cassette in position 3 in Character 13 0 - Currency cassette in position 4 out (bottom) 1 - Currency cassette in position 4 in Please note that many of these Sensor Status changes are also logged on the journal tape in plain English. Example: Interpretation: *1234*1*P*20 Following transaction (1234), the ATM (1), as a result of user intervention, underwent a change in the position of the mode switch (20). Character 1 of the module status (20) indicated the mode switch change while Character 2 of the module status (20) indicated that the mode switch was switched to the Normal position. In this example, the text "SUPERVISOR MODE EXIT" would also have printed on the journal tape. Device Code V = Statement Printer Format = *tttt*m*V*a, M-bb, R-ccccc Field Specifics *tttt*m*V*a, M-bb, R-ccccc a = Transaction / Device Status Possible values for "a": 0 - No transaction error 1 - Print/cut not successfully completed 2 - Device not configured 3 - Statement present in the transport 4 - Cardholder pressed "CANCEL" during the print and wait routine NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 16 CR 56XX ATM Training Guide __________________________________________________________________________________ Device Code V = Statement Printer (continued) Field Specifics *tttt*m*G*a, M-bb, R-ccccc bb = Module Status Possible values for "bb": 00 - No error 01 - Mechanical jam (causing a fatal component situation) 02 - Printer communications error (causing a fatal component situation) 04 - Black mark error (causing a fatal component situation) 05 - Eject jam (causing a fatal component situation) 07 - Paper not loaded (causing a fatal component situation) 08 - Ribbon needs to be replaced soon/now 09 - Knife needs to be replaced soon 10 - Printhead needs to be replaced now (this causes a fatal component situation) 11 - Printer left open (causing a fatal component situation) 12 - Shutter jammed open (causing a fatal component situation) 13 - Shutter jammed closed (causing a fatal component situation) 16 - Capture jam (causing a fatal component situation) 17 - Statement removed by customer during capture 18 - Statement stuck in throat; unable to pull into printer - possible customer tampering 19 - No paper present at start of command 20 - Printer malfunction 21 - Bin overfill (causing a fatal component situation) 22 - Print attempted beyond end of statement 23 - Printer fatal 30 - Illegal media 33 - Buncher communication failure 34 - Clamp drive jammed open (causing a fatal component situation) 35 - Clamp drive jammed closed (causing a fatal component situation) 36 - Capture bin full (causing a fatal component situation) 146 - SDC link failure NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 17 CR 56XX ATM Training Guide __________________________________________________________________________________ Device Code V = Statement Printer (continued) Field Specifics *tttt*m*V*a, M-bb, R-ccccc ccccc = Supply Status (This 5-digit field contains multiple values for each character) Description and possible values for "ccccc": Character 1 Paper Status: 1 = Sufficient Paper 2 = Paper Low 3 = Paper Out Character 2 Ribbon Status: 1 = Ribbon OK 2 = Replace Ribbon Soon 3 = Replace Ribbon Now c cccc Character 3 Printhead Status: 1 = Printhead OK 2 = Replace Printhead Soon 3 = Replace Printhead Now Character 4 Knife Status: 1 = Knife OK 2 = Replace Knife Soon 3 = Replace Knife Now Character 5 Capture Bin Status: 1 = Capture Bin OK 4 = Capture Bin Overfilled Example: *1234*1*V*1, M-04, R-21121 Interpretation: In transaction (1234), the ATM attempted (1) to print a statement on the statement printer (V) but was unsuccessful in its attempt (1) as the printer was unable to detect the black mark on the statement paper (M-04). The supply status (R-21121) indicates that the paper supply is low (digit 1 = 2), the ribbon (digit 2=1) and printhead (digit 3=1) are OK, the paper cutting knife needs to be replaced soon (digit 4=2) and the statement capture bin is OK (digit 5=1). NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 18 CR 56XX ATM Training Guide __________________________________________________________________________________ Command Rejects These error messages print on the journal tape in response to a message that was sent by the network to the ATM in some form that was not acceptable by the ATM. It can generally be assumed that the transaction attempted did not successfully complete. Further information as to the cause and resolution of this problem will require investigation by you Network Services Customer Service Representative. Format = *tttt*2*CNN Field Specifics *tttt*2*CNN C = Specific Command Reject Category Possible Values for "C": 1 - Message Authentication Code 2 - Time Variant Number Failure 3 - Security Terminal Number Mismatch A - Message Format Error B - Field Value Error C - Illegal Message Type for Current Mode D - Hardware Failure E - Not Supported Values for NN carry different meanings depending on the value for C. The following sections describe the different meanings for NN under the various values for C. 4If the value for C = "A" (message format error), then the possible values and descriptions for NN are: 01 - Message length error ( 02 - Field separator missing or unexpectedly found 03 - Transaction reply message has too many print groups 4If the value for C = "B" (field value error), then the possible values and descriptions for NN are: 01 - Illegal message class (outside range of 1 -4) 02 - Illegal message subclass or identifier on a configuration load message with class 3 03 - Illegal load key message identifier 04 - Illegal terminal command code 05 - Illegal terminal command modifier 06 - Illegal function ID in transaction reply command 07 - Data field contains non-numeric data 08 - Numeric value out of range (Fit value greater than 255) 09 - Invalid message coordination number 10 - Illegal FIT number (not in range 000 - 254) 11 - Too many bills in transaction reply command (total exceeds 40 bill maximum) NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 19 CR 56XX ATM Training Guide __________________________________________________________________________________ Command Rejects (continued) 4If the value for C = "C" (illegal message type for current mode), then the possible values and descriptions for NN are: 01 - Message type only accepted while ATM is in "in-service" mode 02 - Message can not be accepted while diagnostics are in progress 03 - Message can not be accepted while in "out-of-service or supply" mode 04 - Message can not be accepted while in "in-service" mode 05 - Message not allowed while terminal configured for NCR status mode 06 - Message not allowed while terminal configured for Diebold status mode 4If the value for C = "D" (hardware failure), then the possible values and descriptions for NN are: 01 - Encryption failure during key change message 02 - Time of day clock failure during date/time set command or invalid data sent 4If the value for C = "E" (not supported), then the possible values and descriptions for NN are: 01 - Command not supported by software version currently in use 02 - Device required to accommodate the command is not configured Example: *1234*2*D01 Interpretation: After transaction 1234, the ATM network (2) attempted to send a new encryption key (used to conceal a customer's PIN when sent for authorization) to the ATM but a hardware error was detected (D) that indicated that an encryption failure occurred during the key change message (01). NCR/AT&T Intellectual Property - NCR Confidential 9/19/2026 20
0
You can add this document to your study collection(s)
Sign in Available only to authorized usersYou can add this document to your saved list
Sign in Available only to authorized users(For complaints, use another form )