Conduction Heat Transfer
Problem Set #1
Due on 9/21
1
Conduction Heat Transfer
Problem Set #1
Problem 1
(15 points)
Read the Wikipedia page of continuity equation. The differential form of the continuity equation for a
conserved quantity q is given by,
∂ρ
+∇·j=σ
(1)
∂t
where j is the flux of q, t time, and σ the volumetric generation rate of q. Here q is any conserved extensive
quantity (mass, energy, momentum, or charge).
1. Can you derive Eq. 1 using the infinitesimal control volume approach?
2. What is the conserved quantity q in the case of heat conduction?
3. Noether’s theorem reveals something remarkable: every conservation law comes from a symmetry. Momentum is conserved because space looks the same everywhere. Angular momentum because it looks the
same in every direction. What symmetry does the conservation law in part (2) come from?
2
Conduction Heat Transfer
Problem Set #1
Problem 2
(25 points)
1.17 A cable of radius ro , conductivity k, and specific heat cp moves through a furnace with velocity U and
leaves at temperature To . Electric energy is dissipated in the cable resulting in a volumetric energy generation
rate of q 000 . Outside the furnace the cable is cooled by convection and radiation. The heat transfer coefficient
is h, emissivity ε, ambient temperature T∞ , and surroundings temperature is Tsur . Use a simplified radiation
model and assume that the cable is infinitely long. Write the steady-state two-dimensional heat equation
and boundary conditions.
r
h, T∞
0
U
ro
z
To
h, T∞
furnace
3
Conduction Heat Transfer
Problem Set #1
Problem 3
(30 points)
A plate of thickness L1 and conductivity k1 is sandwiched between two plates of conductivity k2 and thickness
L2 each. The outer plates generate heat at a volumetric rate q 000 ; the inner plate has no energy generation.
The exposed surfaces of the two outer plates are maintained at constant temperature To .
x
To
k2 , q 000
k1
L2
L1
0
k2 , q 000
L2
To
1. Assume one-dimensional conduction, constant conductivities, and perfect contact at the interfaces. Determine the steady-state temperature distribution in the three plates.
2. State which of the given quantities do not appear in your result, and explain why.
4
Conduction Heat Transfer
Problem Set #1
Problem 4
(30 points)
A constant-area fin of length 2L, cross-sectional area Ac , circumference C, and conductivity k generates heat
at a volumetric rate q 000 . Half the fin is insulated along its surface while the other half exchanges heat by
convection to an ambient at T∞ with heat transfer coefficient h. Both the base and the tip are insulated.
Assume one-dimensional, steady-state conduction with constant properties.
L
L
h, T∞
0
q 000
x
h, T∞
1. Write the governing equation and boundary conditions for each half of the fin, and state the conditions
that must hold at the junction between them.
2. Determine the steady-state temperature at the mid-section, x = L.
3. At what location is the temperature highest? Justify your answer.
5