NON-FERROUS METALS
Metals that do not contain iron as the main ingredient are known as non-ferrous metals. Nonferrous metals commonly used as building materials include aluminum and its alloys, copper
and its alloys, zinc and its alloys, lead, nickel and tin.
These metals possess low strength at high temperatures, generally suffer from hot shortness
and have more shrinkage than ferrous metals. They are utilized in industry due to the following
advantages:
1. High corrosion resistance
2. Easy to fabricate, i.e., machining, casting, welding, forging and rolling
3. Possess very good thermal and electrical conductivity
4. Attractive color and low density
ALUMINUM AND ITS ALLOYS
Aluminum is available in abundance on the surface of the earth in the form of bauxite (Al203,
2H20), kaolin (china clay), kryolite and corundum. However, bauxite is the main source from
which aluminium is extracted economically.
The steps in extracting aluminum are as follows: Bauxite is roasted, ground and heated with
sodium hydrate (NaH). Then it is filtered. It is then dissolved in fused cryolite (Na 3AlF6), a double
fluoride of aluminum and sodium. This solution is placed in an electric furnace and aluminum is
separated by electrolysis. Aluminum sections are manufactured by casting or by extrusion to
meet the requirements.
Properties of Aluminum
Aluminum has the following properties:
•It is silvery white with a bluish tinge.
•Its freshly broken surface exhibits bright lustre.
•It is a light metal, with a specific gravity of 2.7 only.
•It is malleable and ductile.
•It is non-magnetic.
•It is highly resistant to corrosion and chemical action.
•It is a good conductor of electricity.
•It melts at 660° C Its tensile strength is 270 N/mm2.
•Its strength-weight ratio is very favourable for construction.
Advantages of Using Aluminum as Construction Material
Aluminum is used extensively in construction for making doors and windows, roofing sheets,
ladders and as electrical conductor. It is widely applied because it has the following advantages:
Airtightness: Aluminum extrusions can be very precise. Hence, airtight window frames can be
made easily.
Ease in fabrication and assembly: As aluminum is comparatively soft and ductile, fabrication is
easy. It is easy to cut and assemble on-site too.
High corrosion resistance: Because of its high resistance to corrosion, it can be used even on
seashores.
Resistance to insect attack: There is no danger of attack from white ants and borers, as in the
case of wood.
Economy in maintenance: It does not require painting, so the cost of maintenance is low.
Good noise control: Aluminum is an excellent reflector of electromagnetic and sound waves.
Hence, aluminum windows are preferable to windows made from any other material.
High reflectivity: Aluminum sheets absorb less radiant heat. Hence, aluminum is a good
material for roofing and sidings of workshop sheds.
High strength-weight ratio: This property helps aluminum alloys to be used in making
automobile and airplane bodies. They are used for making ladders too.
Ease in transport: Considerable cost is saved in transporting aluminum products, as it is a light
material.
High conductivity of electricity: Aluminum wires are used for high-voltage distribution of
electricity. However, it is not used for wiring in homes, as it tends to oxidize when in contact
with the atmosphere, when the voltage is low.
Aesthetic appearance: It has an attractive appearance and can be powder coated to get various
shades.
High scrap value: Scrap value of aluminum is high.
Aluminum Alloys
Aluminum is soft and hence is rarely used in its pure form. It is used by alloying with other
metals. Popular varieties of aluminum alloys are discussed below:
Duralumin: It is an important alloy of aluminum. Its constituents are: Aluminum 94% Copper 4%
Magnesium, manganese, iron and silicon 0.5% each
This alloy is very strong. It is used in automobiles and aircraft, as its strength is as high as that of
steel, coupled with low weight.
Aldural: It is duralumin coated with thin aluminum. The coating prevents corrosion of the core
due to salt water.
Aluminum bronze: It is an alloy of copper (90-78%) and aluminum (10-22%). It is hard and does
not rust. It is used for grill works in buildings and in marine conditions, as it has high resistance
to corrosion.
Y-alloy: It consists of aluminum with copper (4%), nickel (2%) and magnesium (1.5%). It is a
good conductor of heat and maintains strength at high temperature also. It is used for cylinder
heads, gear boxes, engine pistons, etc.
Uses of Aluminum and its Alloys
Aluminum and its alloys have the following uses:
•For making doors and windows
•As roofing sheets and for partitioning
•Wires used as electric conductors
•For making grills
•For making ladders
Aluminum is also used for the following works:
•Manufacture of automobile and aircraft bodies
•For making cylinder heads, gear boxes and engine pistons
COPPER AND ITS ALLOYS
Copper is extracted from the following ores:
Cuprite (Cu20)
88 percent copper
Copper glance (Cu2S)
80 percent copper
Malachite (CuCO3 + Cu(OH)2)
56 percent copper
Copper pyrites (CuFeS2)
34.5 percent copper
The extraction of copper from its ore may be divided into four stages:
1.Roasting: Ores are crushed to small pieces and roasted in a reverberatory furnace. This
process removes Sulphur
2.Smelting: Roasted ore is mixed with limestone and a small quantity of coke, and the mixture
is smelted in a blast furnace. This removes most of the impurities.
3.Converting: The melted metal is oxidized in a Bessemer converter and blister copper is
obtained. The blister copper is again melted in a reverberatory furnace in the presence of air
and slag is removed. The copper obtained is 99.7 per cent pure.
4.Electrolytic refining: 100 per cent pure copper is obtained by electrolysis.
Properties of Copper
Copper has the following properties:
•It is a bright, shining metal, reddish in colour.
•On exposure to air, its becomes greenish in colour.
•It is malleable and ductile, and can be worked in cold and hot states.
•It is not affected by water at any temperature.
•It is a good conductor of heat and electricity.
•Its melting temperature is 1083° C.
•Its specific gravity is 8.9.
•It can be alloyed with other metals.
•By suitable treatment it can be made strong, hard and tough.
Uses of Copper
Copper has many important uses:
•Copper wires are used as electric cables.
•Copper straps are the best lightning conductors.
•Copper straps are used as dowels in stone masonry and for making construction joints in RCC
structures.
•It is used in making alloys like brass and bronze.
Alloys of Copper
Brass, bronze and German silver are important alloys of copper.
Brass: It is an alloy of copper (60-90%) and zinc (10-40%). There are many varieties of brass with
varying amounts of copper and zinc. Some of them contain small quantities of iron or lead also.
Brass fittings are commonly used for doors and windows. They are made by casting. They are
usually chromium plated or nickel plated to improve appearance.
Bronze: Bronze is an alloy of copper and tin. Depending upon the percentage of copper, the
following types of bronze are manufactured.
Bell metal
82% copper
Gun metal
88% copper
Phosphorus bronze 89% copper
Bronze is not affected by sea water. Hence, it is used for various parts in ships, shafts and axles.
It was used for casting cannons in the Middle Ages. German silver: It is an alloy of copper (5080%), zinc (10-30%) and nickel (20-30%). It is silvery white in colour and offers great resistance
to corrosion. It is used for making utensils, scientific instruments, automobile fittings, etc.
ZINC
Principal ores of zinc are calamine (ZnCO3) and zinc blende (ZnS). Zinc blende contains about 50
per cent zinc, while zinc calamine contains about 65 per cent zinc.
Manufacture
Zinc ore is heated in an electric furnace to remove all volatile materials. The ore is then mixed
with coke or coal and placed in a vertical retort furnace. The temperature is raised to white
heat (1100°C). At this stage, zinc is liberated in the form of vapour, which is condensed and
taken out of the chamber in the form of liquid. The liquid form of zinc is then moulded in the
form of slabs or ingots.
Properties, Uses and Alloys
Zinc has the following important properties:
•It is a bluish-white metal.
•It is brittle at ordinary temperature.
•Its melting point is 419° C.When heated to about 900° C it bums with a greenish-white flame.
•It is not affected by dry air and pure water.
•It can be rolled into sheets and drawn into wires at 100-150° C,
•It is destroyed by acid, hot water, sea salt, lime and other calcareous substances.
•Its specific gravity is 7.15.
The major uses of zinc are as follows:
•It is used for galvanizing iron plates and sheets
•It is used for making paints
•It is used in electric cells and batteries
•It is used for making brass and for engraving.
Alloys of zinc:
With copper, zinc is used to make brass and German silver.
LEAD
The ore from which lead is usually extracted is known as galena (PbS). It contains about 86 per
cent lead. The extraction of lead from its ore involves the following steps:
•The ore is roasted to reduce sulphur content.
•After adding coke, the mixture is smelted in a blast furnace to get a mass known as lead
bullion.
•Lead bullion is remelted in a reverberatory furnace and pure lead is obtained.
Properties of Lead
•It is a lustrous metal having bluish-grey colour.
•It is a soft metal, which can be cut by a knife.
•It is malleable and hence can be rolled into thin sheets.
•Its specific gravity is 11.36.
•It melts at 326° C.
•It resists atmospheric corrosion.
•It dissolves readily in dilute nitric acid.
•It turns dark in colour, in the presence of moist air.
Uses of Lead
•It is used for making sanitary fittings, cisterns and waterproof and acid proof chambers.
•It is also used for making gas pipes, roof gutters and printing types.
•Lead compounds are used as pigments in paints.
•Lead is used for making bullets and shots.
NICKEL
Nickel is extracted from arsenide, sulphide and silicate ore. However, it is mainly extracted from
sulphide ore as follows:
•The ore is cleared and roasted in heaps.
•Roasted ore is mixed with limestone, quartz and smelted in a blast furnace.
•The molten mixture is led to a Bessemer converter with basic lining and treated. Repeated
smelting may be necessary.
Properties of Nickel
•Nickel is a greyish-white, lustrous metal.
•It can take high polish.
•It can be welded easily.
•It is hard, malleable and magnetic.
•Its resistance to corrosion is high.
•In powder form it can absorb hydrogen to the extent of about 17 times its volume.
•Its specific gravity is 8.9.
•Its melting point is 1452° C.
Uses of Nickel
•It is widely used as a protective coating on other metals.
•It is used in manufacturing chemical apparatus, crucibles and domestic utensils.
•It is used to manufacture coins of small denominations. It is used to make alloys like German
silver and nickel steels.
TIN
Tin ore is found in oxide form and is called cassiterite (SnO2). The ore is crushed, roasted and
then smelted at a temperature of 1000° C in a furnace. Crude tin is further refined by heating or
electrolysis. It is then cast into moulds.
Properties of Tin
•It is a silvery-white lustrous metal.
•It is malleable.
•It becomes brittle when heated to 200° C.
•It melts at 232° C.
•It is not affected by dry air and pure water.
•It is acid resistant.
•Its specific gravity is 7.31
Uses of Tin
•It is used as a protective coating for metals like iron, copper, brass and lead
•It is used to make alloys with lead and other metals.
•It is used as a foil to protect food products.
•Tin is used for silvering mirrors.
•It is used in the manufacture of collapsible tubes and pipes used in toilets.