ME 321: Fluid Mechanics - I
Inviscid Incompressible Flow
Lecture 1
From the differential analysis of fluid motion, it has been seen that if
energy consideration is not important, a flow field is described completely
by continuity equation (Eq. 1) and Navier-Stokes equation. (Eq. 2).
Where,
Velocity vector,
Body force,
Pressure field,
Dynamic viscosity of fluid, m = constant
1
These equations are non-linear in nature and difficult to solve but it is
possible to manage solutions under some conditions if the flow is irrotational, then the equations of motions are greatly
simplified because we can express the vector field in terms of scalar
function f, called the velocity potential.
if the flow is incompressible and two-dimensional, then the equations
can also be greatly simplified. In this case, the velocity can be expressed
by another scalar function y, called the stream function.
Under these conditions the considered flow field will be inviscid,
incompressible and irrotational. The governing equation will become linear
and is possible to solve analytically.
Vorticity and Irrotationality
If the flow is irrotational, it does not mean that the flow is not rotating: an
irrotational flow can be in rectilinear or rotating motion relative to some
reference frame. What is important is the rotation of individual fluid
particles about its axis.
2
To characterize a flow is irrotational or rotational (i:e: not irrotational) a
term, Vorticity is used.
Figure 1: Rotation and distortion of a fluid element
3
Let us consider a 2D flow in the x - y plane. Also, consider an infinitesimal
fluid element in this flow. Assume that at time t, the shape of this fluid
element is rectangular, as shown on the left of Fig. 1.
Assume that the fluid element is moving upward and to the right; its
position and shape at time t + Dt are shown on the right in the figure. During
the time increment Dt, the sides AB and AC have rotated through the
angular displacement -q1 and +q2, respectively.
Line AC has rotated because during the time increment Dt, point C has
moved differently with respect to point A.
Consider, the velocity in y - direction:
at point A at time t, this velocity is v
Now, by continuum approach, the velocity at point C =
During time increment Dt, in y - direction, the distance traveled by A = vDt
And the distance traveled by C =
Net displacement in y - direction of C relative to A=
- vDt
The net displacement is shown at the right of Fig. 1
4
5
6
7
8
9
10
From, Eqn.2, the viscous term in the Navier-Stokes Equations is of the form
So, it can be said that an incompressible, irrotational flow will imply an inviscid
flow as well.
.
Again, for viscous flows the term,
is not zero. Consequently, it can be said that
the viscous flows can never be considered irrotational and the simplified calculations
and results discussed in this course will not be applicable for viscous flows.
11
12
13
14
15
16
Lecture 2
17
18
19
20
21
22
23
So, streamlines and equipotential lines are mutually orthogonal. They form
an orthogonal flownet. Two observations can be made:
First, streamlines are tangential to the flow direction, given by the direction
of velocity vector.
Second, the gradient operator points in the direction of the maximum rate of
change, which locally will always be in a direction normal to a line of constant
potential. Since
the lines of constant stream function must be
orthogonal to lines of constant velocity potential.
24
25
26
27
28
29
30
31
32