Department of Mathematics and Philosophy of Engineering
MHZ5219- Stochastic Processes
Problem Set 01
Academic Year: 2025/2026
Question 1: Smart Building Monitoring
A smart building records the following daily average measurements:
Day
Power Consumption (kW)
Indoor Temperature (°C)
1
42
24
2
45
26
3
41
23
4
48
28
5
44
25
Answer the following:
(a) Compute the mean vector.
(b) Compute the covariance between power consumption and temperature.
(c) Interpret the sign of the covariance in practical terms.
Question 2: Wind Turbine Measurements
A wind turbine records wind speed (X) and rotor speed (Y) simultaneously. The following statistics
are known:
Calculate:
Var(X) = 9,
Var(Y) = 16,
Cov(X, Y) = 10
1
(a) The 2 × 2 covariance matrix.
(b) The correlation coefficient ρ(X, Y).
(c) Comment on the strength and direction of the relationship.
Question 3: Data Centre Monitoring
Three sensors in a data centre measure CPU temperature, fan speed, and power usage. Their joint
covariance matrix is:
25 −15 10
Σ = −15 36 −8
10
−8 49
Identify:
(a) The pair with the strongest positive relationship.
(b) The pair with the strongest negative relationship.
(c) What each diagonal element represents.
Question 4: Electric Vehicle Battery System
V
An EV battery system is modelled using the random vector X = I where V is voltage, I is current,
T
and T is temperature. The expected values are:
E[V] = 400 V,
E[I] = 120 A,
E[T] = 35 °C
(a) Construct the mean vector E[X].
(b) Explain the engineering meaning of this mean vector in the context of battery management.
Question 5: Agricultural Sensor Network
Two soil moisture sensors at adjacent locations produce random measurements X and Y with the
following statistics:
Var(X) = 4,
Var(Y) = 9,
Cov(X, Y) = − 5
(a) Find the correlation coefficient ρ(X, Y).
(b) Explain the practical meaning of a negative correlation between the two sensor readings.
2
Question 6: Temperature Measurement System
A precision temperature sensor is used to measure a true temperature of 30 °C. After 500 repeated
readings, the sample mean X̄ satisfies:
E[(X̄ − 30)²] = 0.002
(a) What type of convergence is most relevant to describe the behaviour of X̄?
(b) What does the value 0.002 indicate about the estimator's performance?
Question 7: Manufacturing Quality Control
The average diameter of manufactured bolts after n measurements is X̄n. For a target diameter of 10
mm, it is found that:
P(|X̄n − 10| > 0.1) = 0.05
for large n
Explain what this statement says about convergence in probability. What does it mean practically for
quality assurance?
Question 8: GPS Position Estimation
The mean-square error (MSE) of a GPS location estimator as the number of satellite measurements
increases is given below:
Number of Measurements
MSE (m²)
50
4
100
2
200
1
400
0.5
(a) What trend do you observe in the MSE as measurements increase?
(b) Which convergence concept is illustrated by this behaviour?
3
Question 9: Air Pollution Monitoring
An estimator Xn of the true pollution level (50 µg/m³) satisfies:
E[(Xn − 50)²] → 0
as
n→∞
What does this imply about the behaviour of the estimator? Name the type of convergence and
comment on the practical implication for environmental monitoring.
Question 10: Solar Irradiance Estimation
Two algorithms estimate daily solar irradiance at a photovoltaic installation:
Algorithm
Mean-Square Error
A
0.8
B
0.2
Which algorithm would you select and why? Relate your answer to the concept of mean-square
convergence.
Question 11: Receiver Noise
The voltage noise at a wireless receiver is modelled as a Gaussian process with:
mX(t) = 0andCX(t, s) = 4e−0.5|t−s|
(a) Is the mean function constant over time?
(b) Does the covariance function depend only on the time difference (t − s)?
(c) Based on (a) and (b), is the process wide-sense stationary (WSS)?
Question 12: Smart Traffic Monitoring
Vehicle traffic density is modelled as:
X(t) = 50 + 20sin(πt/12) + N(t)
where N(t) is a stationary noise process with zero mean.
Determine whether X(t) is wide-sense stationary (WSS). Justify your answer by examining the mean
and covariance functions.
4
Question 13: Ocean Wave Elevation
A Gaussian process modelling ocean wave elevation has:
mX(t) = 2andRX(τ) = 15e−0.3|τ|
(a) Is the process wide-sense stationary (WSS)?
(b) For a Gaussian process that is WSS, what additional property follows? State and explain it.
Question 14: Thermal Noise Power
White Gaussian noise in a resistor has autocorrelation function:
RX(τ) = 8δ(τ)
Find the average power of the process. Show your working and state the relevant property of
RX(τ) that you use.
Question 15: Vibration Monitoring
The vibration signal of an industrial machine has autocorrelation function:
RX(τ) = 12cos(5τ)
(a) Find the average power of the vibration signal.
(b) What does the oscillating nature of the autocorrelation function suggest about the signal?
Explain in physical terms.
Question 16: Correlated Sensor Noise
A WSS random process has autocorrelation function:
RX(τ) = e−2τ²
(a) Is the process mean-square continuous? Justify your answer using the relevant condition.
(b) Is it likely to be mean-square differentiable? State the condition you apply.
5
Question 17: Communication Noise
A random process has autocorrelation function:
Determine whether the process is:
(a) Mean-square continuous.
(b) Mean-square differentiable.
Give a brief justification for each answer.
RX(τ) = δ(τ)
Question 18: Radar Signal Analysis
For a WSS random process with autocorrelation function:
RX(τ) = e−0.5τ²
Find the autocorrelation function of its mean-square derivative X'(t), using the relation:
Show all differentiation steps clearly.
RX'X' (τ) =− d²/dτ²RX(τ)
Question 19: Energy Collected by a Sensor
A random process X(t) has constant mean E[X(t)] = 3 for all t. Define the accumulated output:
Y=
4
0
X(t)dt
(a) Find E[Y].
(b) Provide a physical interpretation of the result in the context of sensor energy integration.
6
Question 20: Autonomous Vehicle Navigation
White Gaussian noise X(t) with RX(τ) = 5δ(τ) is integrated over time to produce:
Y(t) =
t
0
X(τ)dτ
(a) Find E[Y(t)].
(b) Find Var(Y(t)).
(c) Name the resulting stochastic process Y(t).
(d) Is the process Y(t) stationary? Justify your answer.
7