CIVIL 3D MODELING GUIDELINES Infrastructure Projects Sinoj Ravindran BIM Manager 1 Civil 3D Modeling Guidelines Contents 1. Introduction..........................................................................................................................3 2. Scope ...................................................................................................................................3 3. Site Grading or Earth Works ...................................................................................................3 4. Roads ...................................................................................................................................3 5. 4.1 Surface ....................................................................................................................4 4.2 Road Carriageway.....................................................................................................5 4.3 Walkways .................................................................................................................5 4.4 Road Kerbs/Barriers/Protections/Guard Rails ............................................................5 4.5 Road Sign Boards......................................................................................................6 4.6 Road Paint Markings .................................................................................................7 Wet Utilities ..........................................................................................................................8 5.1 Storm and Sewer Network (Gravity Network) .................................................................9 5.2 Potable & Irrigation Network (Pressure Network).......................................................... 10 6. Electrical Utility .................................................................................................................. 11 6.1 Medium Voltage ......................................................................................................... 12 6.2 Low Voltage................................................................................................................ 13 6.3 Fiber Optics................................................................................................................ 13 6.4 High Voltage ............................................................................................................... 14 7. Other Dry Utilities ............................................................................................................... 14 7.1 Telecom / Security Systems ........................................................................................ 14 7.2 Streetlight .................................................................................................................. 16 7.3 Traffic Control ............................................................................................................ 17 8. Federated Model................................................................................................................. 18 8.1 Roads ........................................................................................................................ 19 8.2 Wet Utilities................................................................................................................ 19 8.3 Electrical Utilities ....................................................................................................... 19 8.4 Other Dry Utilities ....................................................................................................... 19 8.5 Landscape ................................................................................................................. 19 9. Clash Resolution ................................................................................................................ 20 10. Model Layer Name ......................................................................................................... 22 11. Model Object Name........................................................................................................ 22 12. Property Set Data ........................................................................................................... 23 March 11, 2025 2 Civil 3D Modeling Guidelines 13. Geolocation ................................................................................................................... 24 14. Model Submission .......................................................................................................... 26 15. BIM Register ................................................................................................................... 27 16. 2D Drawings from 3D Model............................................................................................ 28 17. Data Short Cuts .............................................................................................................. 28 18. Automation .................................................................................................................... 29 Figure 1 – Proposed Road Surface Model ......................................................................................4 Figure 2 – Pavements & Structural Fill Model .................................................................................5 Figure 3 – Road Kerb Model...........................................................................................................6 Figure 4 – Road Kerb Model – Close View.......................................................................................6 Figure 5 – Road Signage Model......................................................................................................7 Figure 6 – Dynamic Sign Board Block - 3D View..............................................................................7 Figure 7 – Dynamic Sign Board Block - 2D View..............................................................................7 Figure 8 – Road Paint Marking Model federated in Navisworks ........................................................8 Figure 9 – Stormwater Model ........................................................................................................9 Figure 10 – Sewer Model ............................................................................................................. 10 Figure 11 – Potable water Model ................................................................................................. 11 Figure 12 – Irrigation Model ......................................................................................................... 11 Figure 13 – Medium Voltage Model .............................................................................................. 12 Figure 14 - Low Voltage Model .................................................................................................... 13 Figure 15 - Fiber Optic Model ...................................................................................................... 14 Figure 16 - Telecom Model.......................................................................................................... 15 Figure 17 - Security System Model .............................................................................................. 16 Figure 18 - Street Light Model ..................................................................................................... 17 Figure 19 - Traffic Control Model ................................................................................................. 18 Figure 20 - Federated Model Top View ......................................................................................... 20 Figure 21- Federated Model Bottom View .................................................................................... 20 Figure 22 - Sample Clash Matrix.................................................................................................. 22 Figure 23 - Property Set Data ...................................................................................................... 23 Figure 24 - Standardized Data Tool.............................................................................................. 24 Figure 25 - Drawing Properties Menu from Drawing Utilities ......................................................... 25 Figure 26 - Drawing properties Menu from Toolspace .................................................................. 25 Figure 27 - Geomap .................................................................................................................... 26 Figure 28 - GEOMAP Command in Civil 3D Profile ........................................................................ 26 Figure 29 - Approved Clash Reason is mentioned in Navisworks .................................................. 27 Figure 30 - Bim Register .............................................................................................................. 27 Figure 31- Streetlight Pole as Multi-View Block & Multi-View Blocks tool path ............................... 28 Figure 32- Data Shortcut Manager............................................................................................... 29 Figure 33- Dynamo and Dynamo Player ....................................................................................... 30 March 11, 2025 3 Civil 3D Modeling Guidelines 1. Introduction Civil 3D is a well-known industry application for modelling infrastructure roads and utilities. It is based on the Autocad interface, hence user-friendly and easy-to-learn tools. This guideline is intended to provide designers and contractors with insight into the modelling and delivery parts for aligning the submissions. 2. Scope Civil 3D model guidelines is to establish the procedure of the infrastructure project BIM modeling process and the delivery strategy. This is an important document that outlines how the Civil 3d software is used to model and the essential industry best practices. It helps to ensure that all parties clearly understand what and how to use the application to deliver different discipline models and set a framework for Civil 3D infrastructure project models. It is also used as a tool to address the responsible party's capability of the process and the requirements. This document provides a general-purpose procedure for Civil 3D modeling. 3. Site Grading or Earth Works The grading feature in Civil 3D is useful for generating a site grading or any type of earthworks surface. It shall be submitted after freezing any feature lines or 2D lines used as break lines. The proposed grading surface is to be provided as a separate model from the existing surface. 4. Roads Civil 3d is a powerful software for accurately designing road elements using its alignment, profile, and corridor method. The proposed road surface can be generated using the assembly and corridor tools, and a combined proposed road surface will be generated to facilitate utility modeling. Later, the different structural parts of the road, like asphalt wearing and base, aggregate, and select fill, 3D solids will be modeled to correct thickness. Also, any parking and cycle tracks in the layout will be modeled. See the sample image below; different layers of pavement are modeled and separated by colors for identification. The corridor will be used to model road kerbs, Cycle track kerbs, barriers, protections, and guard rails, and 3D solids will be generated from corridors to use as the main model. These March 11, 2025 4 Civil 3D Modeling Guidelines working Civil 3D files which is used for generating the models must be submitted as a separate file. Road signage can be modeled using the dynamic block of AutoCAD, which can then contain both the 2D and 3D views. Dynamic blocks contain powerful tools like parameters, constraints, and visibility, which can be used to create sign boards for 2D and 3D views. Road paint markings model to be at correct levels as of road and visible correctly. Different plugins or AutoCAD polylines can be elevated to proposed road surface levels. Ensure the polylines are in the proper thickness of the paint marking line as per the standards. 4.1 Surface Roads shall include all model entity elements as per stage requirements. Starting with the existing and proposed road surface has to be included as a civil 3d surface. The Proposed Road surface shall accurately represent the right-of-way width, including any road median, carriageways, walkways, and green areas. The overall project proposed road surface be combined to facilitate utility modeling. If a large area surface becomes heavy, it can be divided into portions as required by the convenience of the modeling; while submitting the federated model, make sure not to have many divisions but to be done as a single combined model. Surface shall be free of any 2d elements or feature lines. Any such objects are used for break lines or boundaries to freeze while delivery. Surface triangulation lines are to be clean or delete exactly as required by the end limit line. Figure 1 – Proposed Road Surface Model March 11, 2025 5 Civil 3D Modeling Guidelines 4.2 Road Carriageway Road carriageway structural sections will be modeled for different layers as per the design of road cross sections. Asphalt, aggregate, and select fill will be modeled as solids in civil 3D to represent the exact slope, width, and depth. Figure 2 – Pavements & Structural Fill Model 4.3 Walkways Walkways shall be modeled as solids and represent the slope width and thickness as required in the design cross sections. 4.4 Road Kerbs/Barriers/Protections/Guard Rails Different road kerbs must be modeled as solids to represent the correct shape and dimensions. Not just the hard surface but also the plain concrete and haunching shall be modeled. Usually, Civil 3D road corridor functionality offers the tools to model various types of kerbs and later convert these corridor shapes into 3D solids. March 11, 2025 6 Civil 3D Modeling Guidelines Figure 3 – Road Kerb Model Figure 4 – Road Kerb Model – Close View 4.5 Road Sign Boards All types of sign boards, including overhead gantries or cantilevers, must be part of the model with the correct shape, color, and dimension. The concrete foundations are a very significant part of these road signages to ensure they do not clash with the utilities. The locations of signages must follow the design standards and be well coordinated with other disciplines, including landscape philosophy. March 11, 2025 7 Civil 3D Modeling Guidelines Figure 5 – Road Signage Model Figure 6 – Dynamic Sign Board Block - 3D View 4.6 Figure 7 – Dynamic Sign Board Block - 2D View Road Paint Markings All types of road paint markings are to be modeled and shall be clearly visible on the road in a 3D view. The width, length, color, and pattern of paint markings shall follow the same design standards. March 11, 2025 8 Civil 3D Modeling Guidelines Figure 8 – Road Paint Marking Model federated in Navisworks 5. Wet Utilities Wet utilities include stormwater, sewers, potable water, irrigation, recycled water, and any other lines, such as gas lines, that run under gravity and pressure. Civil 3D is capable of modeling the gravity network using its pipe network tool. The hydraulic model from Bently can be exported as a shape file and imported into Civil 3D. Make sure to have the correct catalogs for pipes and structures, and the gravity pipes and structures, mainly manholes, inlets, and inspection chambers, will be modeled in the correct levels and locations. Civil 3d has a separate tool capable of modeling the pressure pipes, fittings, and appurtenances for pressure networks. Using the pressure network tool, model the pressure pipes with correct fittings and add valves and valve chambers as per standards. Fire Hydrants, surface valve boxes, and other model entities can be modeled. Valve boxes for different pipe depths can be modeled using a pipe network structure. In contrast, in the catalog, different depths can be mentioned to automatically change the depth of valves since the pressure network doesn’t support a variable depth valve chamber. Road crossing ducts or any concrete protection around the pipe can be modeled using the pipe network rectangular pipes. A catalog generated with sufficient dimensions for each pipe diameter is essential in this case. Civil 3D styles shall be used for different pipes and structures to ensure that the color and layers are properly aligned as per the requirements. March 11, 2025 9 Civil 3D Modeling Guidelines It is always best practice to use the proper family naming according to the object naming criteria in the catalogs. To use this model in the 2D sheets, use the proper pipe and structure styles in Civil 3D, using the structure and pipe labels. 5.1 Storm and Sewer Network (Gravity Network) Manholes, inlets, outlets, pipes, and pipe protections must be modeled to the correct levels and locations. The structure cover shall be correctly placed on the proposed surface. The proper cover value for the pipes must be maintained. Sewer house connections to be modeled correctly. Figure 9 – Stormwater Model March 11, 2025 10 Civil 3D Modeling Guidelines Figure 10 – Sewer Model 5.2 Potable & Irrigation Network (Pressure Network) Pressure pipes and their correct angle fittings, valves and valve chambers, fire hydrants, valve boxes, and any surface boxes must be modeled to the proper shape and dimensions. The pressure network catalog helps to model different diameter pipes, fittings, and appurtenances. Fire hydrants, valve boxes, and valves can be modeled in any 3D modeling application and added to the catalog. Since the pressure catalog doesn't support varying dynamic blocks for fittings and appurtenances, it is better to model valve chambers in a pressure network for varying depths. Road-crossing concrete ducts can be modeled using the rectangular pipes in the pipe network, which are integrated into the pressure pipes separately. The pipes must be located correctly in the duct. House connections are part of the model as per standards. March 11, 2025 11 Civil 3D Modeling Guidelines Figure 11 – Potable water Model Figure 12 – Irrigation Model 6. Electrical Utility Electrical networks contain many cables and other equipment, such as substations, Feeder pillars, Service Panels, road crossing concrete ducts, and chambers. Civil 3d provides various tools to model a circular cable even though it does not provide a direct dry utility cable modeling tool. Pipe networks, Pressure networks, and corridors are powerful enough to fulfill the modeling of cables. For a large-scale infrastructure project, lengthier multiple cables, pipe, and pressure network methods result in a heavier model. They are March 11, 2025 12 Civil 3D Modeling Guidelines challenging to work around during the modeling and clash resolution stages. Using the corridor method with alignment and profiles to model the cables and later utilizing the corridor solids as cable models is advisable. The alignment, profile, corridors, and assembly civil 3D file will be provided as a working file for later teams to use during any modifications or cable levels output for construction activities. For different diameter cables, assemblies are created to use in the corridor. Other electrical equipment can be modeled as an AutoCAD block reference where the pick point of the block is chosen at a place in the block that will be connecting to the proposed surface using the "move to surface" command in civil 3d. These requirements can be modeled to correct shape and dimensions using any advanced modeling software and then later converted to AutoCAD blocks. Hence, the 3D View will look much more enhanced than tangible objects. The Multiview tool in Civil is preferable for creating these blocks as it can quickly provide a 3d and 2d combined block, which will help in generating the 2D sheets directly from the clash-free models. The alignments of cables can be used as 2D sheet cable routes to represent and use proper alignment styles in Civil 3D. 6.1 Medium Voltage All the cables are to be modeled as per the correct dimension and shape per standard. Different electrical equipment, such as substations, has to be part of the model in accurate locations and levels. The cover value for the cable shall follow the standard requirements. All the toad crossing concrete ducts are to be modeled, and cables to enter and exit level below the road structure's depth. appropriately through these ducts. These road-crossing ducts preferably pass through at a level below the structural road fill. Figure 13 – Medium Voltage Model March 11, 2025 13 Civil 3D Modeling Guidelines 6.2 Low Voltage Low voltage models have many cables from smaller to different diameters, and all those cables are part of the model. These cables shall follow the proper cover value from the top of walkways or any surface per the standard requirements. The road crossing concrete ducts shall be modeled, and the cable's entry and exit shall be correctly and properly aligned. The road crossing duct levels are to follow below the structural element of the road, preferably below the structural section depth. All the electrical equipment, like the feeder pillar, service turret, or any other structures, is to be modeled at the correct location and levels. All the low-voltage house connections must be adequately modeled at the correct locations. Figure 14 - Low Voltage Model 6.3 Fiber Optics Fiber optics conduits are to be part of the model and follow the required cover value from the top of the surface as per standard drawings. The draw pits/chambers will be modeled at proper locations and levels, and the conduit connections shall be correctly aligned. Also, the road crossing ducts are to be part of the models. MV, LV, and FO sometimes share a common road-crossing duct per the design philosophy. March 11, 2025 14 Civil 3D Modeling Guidelines Figure 15 - Fiber Optic Model 6.4 High Voltage All cables and ducts shall be modeled as part of the high-voltage model, and the correct cover level shall be followed as required. All the equipment shall be part of the model. 7. Other Dry Utilities Other dry utilities include Telecom, security networks, streetlights, and traffic networks. As mentioned earlier, there is no specific tool in Civil 3D for modeling these dry networks; we could use the pipe, pressure, or corridor tools. Other equipment can be modeled as 3D blocks or pipe network structures. See below for each network's options, as per the best practice. 7.1 Telecom / Security Systems Upvc ducts, manholes or chambers, and road crossing ducts are the main model elements for the Telecom and security system network. Since different configuration ducts have many pipes running, it is a general practice to model those ducts as rectangular pipes, extending the width and depth of the outer edges of the standard section Ducts to keep the minimum cover from the proposed surface as per the standards. Manholes or chambers are modeled as pipe network structures, and ducts are connected to these manholes or chambers. Since ducts and manholes or chambers are from a pipe network, the manholes or chamber adjustment will dynamically update the connected ducts as well. The manholes or chamber cover must be attached correctly to the proposed surface. Structures shall be modeled in the pipe catalog with any plain concrete per standard drawings. March 11, 2025 15 Civil 3D Modeling Guidelines Road crossing concrete protection ducts are modeled using rectangular pipes. Their dimensions shall match precisely as per standard drawings. Pipe duct connections at the entry and exit of road crossing ducts shall be located properly at the center. Preferably, these duct levels shall be below the structural fill of the road section. Structures shall use the functionality in the structure properties to create a 2D block for the plan view, which can then later be used for the 2D representation. Pipes should use proper styles so that 2D sheets can be used to export the 3D models. For example, a road crossing duct utilizing the style with a hatch in a civil 3D plan view will help generate 2D sheets quickly without additional efforts for hatching the road crossing ducts in the 2D sheet. Figure 16 - Telecom Model March 11, 2025 16 Civil 3D Modeling Guidelines Figure 17 - Security System Model 7.2 Streetlight Steet light model cables or conduits can be modeled using the corridor pipe or pressure network. However, it is best practice to use the corridor to model these cables or conduits for ease of modeling and clash resolution. For example, in electrical cable modeling, once the corridor is modeled using alignment, profile, and assembly, 3D solids can be generated and used as model files. Civil 3d alignment, profile, and assembly files, called working files, are to be provided separately along this 3D solid model file once the model is made after the clash resolution process is achieved. Run the cable conduits through the correct cover levels by lowering the design profile line from the top of the surface profile line to exactly the value required as per the standards. For different diameter cables or conduits, assemblies shall be created to use in the corridor. Other model elements, like street light poles, including their foundation, earth pits, and street light cabinets, can be modeled using the Multiview blocks in Civil 3D. Generating the 2D sheets directly from these Multiview block models will help, as they contain the required 3D and 2D blocks. Cable or conduit alignments can be used to represent the 2D sheet routes; make sure to use the proper required alignment styles in Civil 3D. March 11, 2025 17 Civil 3D Modeling Guidelines Figure 18 - Street Light Model 7.3 Traffic Control Traffic ducts are to be modeled using the pipe network-rectangular pipes, as explained for the telecom system. The chambers can be modeled using pipe network structures. For various types of complex traffic light poles, 3D modeling applications such as Revit can be used. The models can then be brought to Civil 3D as normal AutoCAD 2D blocks and attached to the surface using the 'move to surface' command. Proper civil 3d styles to be used for pipe ducts and structures. March 11, 2025 18 Civil 3D Modeling Guidelines Figure 19 - Traffic Control Model 8. Federated Model This part briefs about the disciplines modeled using the Civil 3D software only and is intended to serve as a guideline for the model preparation. Once the initial modeling is completed, each discipline generates Navisworks NWC or a related application to use for federation and output files to use for the initial federation of models. Pressure network pipes exported to NWC show graphical issues, such as bulged pipes, which can be fixed by changing the Faceting Factor default value of 1 to a higher one, for instance, 10 from the command ‘NWOPT’. Below image shows the Navisworks Options Editor. Figure 20 - NWOPT Menu March 11, 2025 19 Civil 3D Modeling Guidelines The models shall be free of any 2d elements, assigned correct color coding if any, the layers must follow as per requirements, and the property set data to be filled correctly and accurately. Any floating model objects shall not be due to inaccurate model attachment to the surface. Below is a detailed list of models for each discipline. 8.1 Roads Preferably, for roads, the models shall be in separate model files as below – ➢ Existing road surface ➢ Proposed road surface ➢ Proposed road pavement 3D solids – asphalt wearing, base course, aggregate base, and select fill. ➢ Walkway 3D solids ➢ Road Kerb/barrier/protection guard rails 3D solids. ➢ Road sign boards ➢ Road paint markings 8.2 Wet Utilities ➢ ➢ ➢ ➢ Stormwater Sewer Potable water Irrigation and recycle water 8.3 Electrical Utilities ➢ ➢ ➢ ➢ Medium Voltage Low Voltage Fiber Optic Heavy Voltage 8.4 Other Dry Utilities ➢ ➢ ➢ ➢ Telecom Security systems Streetlight Traffic 8.5 Landscape The landscape is part of the federated model. The tree roots and furniture will check for clashes against utilities, kerbs, road signage, kerbs, fencing and other visible design elements. The plan March 11, 2025 20 Civil 3D Modeling Guidelines The other landscape elements, such as hardscape-softscape clashes against others, will have to be verified regarding the philosophy of landscaping vision. Figure 21 - Federated Model Top View Figure 22- Federated Model Bottom View 9. Clash Resolution Once the initial iteration is completed and the federated model and the clash report are circulated to each discipline involved, the modelers will begin the clash resolution workflow. During the process, utilities need to find a way to resolve the clashes March 11, 2025 21 Civil 3D Modeling Guidelines collaboratively, and such discussions shall involve proper workflow practices. For instance, no model elements shall be bent or moved, which is practically impossible to work at the site. Gravity pipes from a stormwater inlet to a manhole shall not touch or clash with other storm pipes entering the manholes. Electrical cables or any ducts shall not bend vigorously to avoid a clash with other disciplines. Any clash resolution shall made to keep in mind the actual site constructability. Not only the hard clashes but also the clearance between different utilities, generally called using the term, soft clearance clashes, to be correctly achieved. Each model shall be thoroughly checked for any quality issues such as ducts not appropriately connected, ducts, cables, conduits, manholes or chambers not at the correct levels, pipes connected to a manhole at the wrong location, ducts connected at chambers not to the bottom plain cement portion, all the utilities following the required cover levels from the top of the surface, all the road crossing ducts are below the road structural fill are few of them. Vertical clearance for each discipline should be checked through clearance from the top of surface. It is easy to check the model entity layer names and object names in the federated model through the selection tree. If any object is found that is not as per the requirements, it should be corrected. Property set data shall reflect in the federated model properties window for each model item once selected. March 11, 2025 22 Civil 3D Modeling Guidelines Figure 23 - Sample Clash Matrix 10. Model Layer Name Civil 3D styles are a powerful tool for setting each model into specific styles for its visibility in 2D and 3D views. You could also assign each element the layer names, color, and layer type so that once modeled, it will automatically set the layer. 11. Model Object Name It is commonly misled that the Model object and model object layer names are the same. In actual practice, the entity layer names come from the Civil 3D styles, and the model entity name is from the object Civil 3D properties. The civil 3D property short menu is not the same as the AutoCAD property menu, which both have entirely different functionality. A Civil 3D model entity name is set from the model entity property menu, and the pipe network provides the functionality to rename all those at once as required from the modify, ‘Rename Parts’ command. From version 2024, the rename parts command is available for the pressure network. For 3D solids and Multiview blocks, property set data is to be used to name the model object. March 11, 2025 23 Civil 3D Modeling Guidelines 12. Property Set Data The property set data function is suitable for adding the non-graphical design attributes to the models. You could import and export property set data from this template file to other Civil 3D files using the SHP import export function located in the Toolbox. The free Standardized Data Tool (SDT) for Civil 3D is an Autodesk Interoperability Tool that allows us to quickly collect, manage, and validate Property Set data from across all our Civil 3D project drawing files into a single Excel spreadsheet. We can also edit that Excel file and push the data back into the drawings. The SDT's Job Validation tool identifies any objects in the model that are not attached to the property set data. SDT and SHP Import/Export Utility tool is a separate extension and is not included with a Civil 3D installation. A separate download and installation is required. Sometimes, AutoCad 3d blocks are used as model objects, which object name can enter into the Property Set Data, Component Name. Figure 24 - Property Set Data March 11, 2025 24 Civil 3D Modeling Guidelines Figure 25 - Standardized Data Tool 13. Geolocation The correct coordinate system can be set from the drawing settings menu and is accessible either from the drawing utilities or from the Toolspace settings by right-clicking on the drawing file name. Once set the correct coordinate system of the project, load the map into the model space and verify the location is accurate. From the ‘Planning and Analysis’ profile, toggle between desired map style - ‘Map Aerial’, ‘Map Road’ or ‘Map Hybrid’ to load the map according to the coordinate zone set. Alternatively, from the Civil 3D profile, type command ‘GEOMAP’ and choose ‘ON’ to turn on the map. Choose the type of map from the selection list inside the bracket. See figure28. March 11, 2025 25 Civil 3D Modeling Guidelines Figure 26 - Drawing Properties Menu from Drawing Utilities Figure 27 - Drawing properties Menu from Toolspace March 11, 2025 26 Civil 3D Modeling Guidelines Figure 28 - Geomap Figure 29 - GEOMAP Command in Civil 3D Profile 14. Model Submission Models shall be separated as per the above sections, and the submission will include Civil 3D, NWC, and IFC formats, MIDP. A federated model is to be submitted in NWD format with an Excel-approved clash matrix. All the approved clashes shall mention the reason for approval in the Navisworks and be noted in the clash matrix for cross-reference. The model compliance certificate has to be checked after ensuring each item mentioned is satisfied with the model. March 11, 2025 27 Civil 3D Modeling Guidelines Figure 30 - Approved Clash Reason is mentioned in Navisworks 15. BIM Register With each model submission, a BIM Register is included to track the models and their revisions. The BIM Register includes model names and descriptions of the Native models, NWCs, IFCs, Federated Models, Clash report Excels, or any other documents, along with revisions and their dates. For each revision, the changes will be noted for ease of reference later. Figure 31 - Bim Register March 11, 2025 28 Civil 3D Modeling Guidelines 16. 2D Drawings from 3D Model After the federated model clash resolution process, 2D sheets shall be produced from the 3D models. To achieve this, all the required Civil 3D styles are to be set for each model, and Multiview blocks are to be used. The top or plan view of models will give the 2D sheet presentation style and can be exported to AutoCAD or used directly into the 2D sheets. Sometimes, due to the heavy size of models, it will be challenging to use the Civil 3D as an attachment in the 2D sheets; the option to export into the AutoCAD feature helps. This will export Civil 3D entity into AutoCAD polylines, lines, and blocks. Later, this file can be attached as xref to the 2D sheet. An integrated sheet model is part of submission in order to assure the 2d drawing sheets are generated from the 3D models. Figure 32- Streetlight Pole as Multi-View Block & Multi-View Blocks tool path 17. Data Short Cuts This is a powerful tool in Civil 3D that helps to share the base model’s data with multiple other Civil 3D files. It works as a reference from the main base models, reducing the file size and avoiding errors like changing levels and model entities. Only the styles can be changed in a data shortcut model. Whenever the main model is updated, the data shortcut will ask for synchronization and update the models, reducing the efforts required to change the data manually as it is dynamically linked. A data shortcut manager helps update an existing model, which is data referenced, using an updated shared data shortcut folder. For instance, the road design primary Civil 3d file data is shared through a data shortcut. The modeler accesses this to generate road March 11, 2025 29 Civil 3D Modeling Guidelines alignment plans and profiles, complete labels and styles, and arrange sheets. Later, when a change in design happens, the modeler can access those new main model file data references through the’ Data shortcut manager' menu and link and update with the latest references. This will automatically update the alignment data; all the labels of alignment and profiles will update automatically, and the sheets will be ready for production quickly. When a data shortcut model sheet is transferred to a different CDE, obviously the path will break, and it will show with a warning icon in the prospector on the model object. Make sure you have the native model of the data shortcut, then right click on the broken model object to re-link the data shortcut. Figure 33- Data Shortcut Manager 18. Automation Civil 3D comes with a built-in application, Dynamo, for automating tasks. The interface is structured so that it is easy to learn and produce scripts for automating multiple commands/tasks at once through the Dynamo Player. For example, in a Telecom model, the pipes/ducts are pulled down from the top of the surface to have the standard cover levels. You could create a dynamo that will push down all the selected pipes in the model to a specific value from the reference surface. Thus, the time consumed is drastically reduced, and accurate results are achieved. March 11, 2025 30 Civil 3D Modeling Guidelines Many Dynamo tools can be created, and a sound library should be developed to help with the modeling part. Many Dynamo scripts are available online for free download through the related platforms. Figure 34- Dynamo and Dynamo Player March 11, 2025
0
You can add this document to your study collection(s)
Sign in Available only to authorized usersYou can add this document to your saved list
Sign in Available only to authorized users(For complaints, use another form )