Department of Multisource Propulsion Systems
Institute of Construction Machinery Engineering
Faculty of Automotive and Construction Machinery Engineering
Warsaw University of Technology
Laboratory of Electrical and Electronics Engineering
Measurements of basic DC and AC electrical quantities
II
Protocol
Date of exercise…………………………………..
Team members:
Surname and name
1. ………………………………………………….
2. ………………………………………………….
3. ………………………………………………….
4. ………………………………………………….
5. ………………………………………………….
6. ………………………………………………….
7. ………………………………………………….
8. ………………………………………………….
9. ………………………………………………….
10. ………………………………………………….
11. ………………………………………………….
12. ………………………………………………….
Academic year: 20…./20….
Semester…………………...
Group………………………
Warsaw, 2015
1
Measurement
1.1
Scaling of galvanometer in voltmeter
Parameters of galvanometer: Rwe=…….Ω, Imax=……..A, class=……..
Calculate the additional resistance which make the meter can measure voltage:
U1=…………………..V; U2=…………………..V;
Rd1=………………..... Ω; Rd2=………………... Ω.
Assemble the measuring system according to the following scheme and perform the
scaling of galvanometer as voltmeter.
Fig. 1. The scheme of measuring system to scale the galvanometer as voltmeter.
E – DC voltage source; R – adjustable resistor; Vw – standard voltmeter; Rd – additional
resistor; Vb – scaled galvanometer.
Scaling should be made for increasing and decreasing voltage value.
Table 1. Scaling of galvanometer as voltmeter (∆u= Ub- Uw)
No.
Increasing voltage
Uw
Ub
V
V
∆u
V
Decreasing voltage
Uw
Ub
V
V
∆u
V
Based on the measurements, plot the characteristic depending on: Ub=f(Uw) and ∆u=f(Uw)
1.2
Scaling of galvanometer in ammeter
Parameters of galvanometer: Rwe=…….Ω, Imax=……..A, class=……..
Calculate the additional resistance which make the meter can measure voltage:
I1=…………………..V; I2=…………………..V;
Rd1=………………...Ω; Rd2=………………... Ω.
Assemble the measuring system according to the following scheme and perform the
scaling of galvanometer as ammeter.
Fig. 2. The scheme of measuring system to scale the galvanometer as ammeter.
E – DC voltage source; R – adjustable resistor; Aw – standard ammeter; Rb – bypass
resistor;
Ab – scaled galvanometer.
Scaling should be made for increasing and decreasing current value.
Table 2. Scaling of galvanometer as ammeter (∆I= Ib- Iw)
No.
Increasing current
Iw
Ib
A
A
∆I
A
Decreasing current
Iw
Ib
A
A
∆I
A
Based on the measurements, plot the characteristic depending on: Ib=f(Iw) and ∆I=f(Iw)
1.3
Scaling of electromagnetic system
Assemble the measuring system according to the following scheme:
Fig. 3. The scheme of measuring system to scale the electromagnetic meters.
AT – autotransformer; Pp – current transformer; Pn – voltage transformer; Aw – standard
ammeter (Iw); Ab – scaled ammeter (Ib); Vw – standard voltmeter (Uw); Vb – scaled
voltmeter (Ub); R0 – load.
Scaling should be made for a set of voltage (current) value.
Table 3. Scaling of the electromagnetic meters
Ratio: kI=………………………A/A; ku=………………………V/V.
No.
Uw
V
Ub
V
kuUb
V
∆u
V
Iw
A
Ib
A
kIIb
A
∆I
A
Based on the measurements, plot the characteristic depending on: kuUb=f(Uw), kIIb=f(Iw),
∆u=f(Uw) and ∆I=f(Iw).