Lesson 1
Two way slab
(Flexural Member)
Classification of two-way
slab based on position
Based on position
Based on support
Based on support
Based on support
Based on support
Two-Way Slab
π
π = ≥ 0.5
πΏ
L
s
πΌππ is the average value of αf for all beams on edges of a panel and αf
shall be calculated in accordance with Section 408.10.2.7
Methods in solving Mu for two way slab
•Direct Design Method
•Moment Coefficient Method
DIRECT DESIGN METHOD
• TOTAL STATIC MOMENT
• Absolute sum of positive and negative factored moments
DIRECT DESIGN METHOD
• TOTAL STATIC MOMENT
• Absolute sum of positive and negative factored moments
Where:
• πu = factored load per unit area
• π2 = transverse width of the strip
• πn = clear span between columns (for circular columns, calc. πn using
h=0.886dc)
DIRECT DESIGN METHOD
• TOTAL STATIC MOMENT
• Absolute sum of positive and negative factored moments
DIRECT DESIGN METHOD
DIRECT DESIGN METHOD
• TOTAL STATIC MOMENT
• Absolute sum of positive and negative factored moments
COLUMN AND MIDDLE STRIPS
COLUMN AND MIDDLE STRIPS
COLUMN AND MIDDLE STRIPS