ENME 341
Fundamentals of Fluid Mechanics
Instructor: Dr. Qi Zhou
Textbook: Munson,Young and Okiishi (Ed. 9)
Chapter 7
Dimensional analysis
Learning Objectives:
After completing this chapter, you should be able to:
■ apply the Buckingham pi theorem.
■ develop a set of dimensionless variables for a given
flow situation.
■ recognize and use common dimensionless groups
Reading: 7.1, 7.2, 7.3, 7.4, 7.5, 7.6
All figures and charts are from the required course textbook unless otherwise indicated.
Munson, B. R.,Young, D. F., & Okiishi,T. H. (2016). Fundamentals of Fluid Mechanics.
Hoboken, NJ: J.Wiley & Sons.
1
The need for dimensional analysis
• Control volume analysis
• Differential analysis
• Experimental studies
How do we design a set of
controlled experiments to
understand the pressure
drop in a circular pipe?
2
Pressure drop in a circular pipe:
Naïve design of experiments
Feasibility?
Feasibility?
3
Pressure drop in a circular pipe:
Improved design using dimensionless
parameter
4
Buckingham Pi Theorem
If an equation involving variables is dimensionally
homogeneous, it can be reduced to a relationship
among
independent dimensionless products,
where is the minimum number of reference
dimensions required to describe the variables.
5
Determination of pi terms
Step 1 List all the variables that are involved in the
problem.
Step 2 Express each of the variables in terms of basic
dimensions.
Step 3 Determine the required number of pi terms.
Step 4 Select a number of repeating variables, where the
number required is equal to the number of reference
dimensions (usually the same as the number of basic
dimensions).
Step 5 Form a pi term by multiplying one of the
nonrepeating variables by the product of repeating
variables each raised to an exponent that will make the
combination dimensionless.
Step 6 Repeat Step 5 for each of the remaining
nonrepeating variables.
Step 7 Check all the resulting pi terms to make sure they
are dimensionless and independent.
Step 8 Rearrange the pi terms to simplify the problem or
to correspond to customary usage.
Step 9 Express the final form as a relationship among the
pi terms and think about what it means.
6
Example: Finding pi terms
Step 1 List all the
involved in the problem.
variables that are
Step 2 Express each of the variables in terms of basic
dimensions.
Step 3 Determine the required number of pi terms.
7
Example: Finding pi terms
Step 4 Select a number of repeating variables, where the
number required is equal to the number of reference
dimensions (usually the same as the number of basic
dimensions).
Step 5 Form a pi term by multiplying one of the
nonrepeating variables by the product of repeating
variables each raised to an exponent that will make the
combination dimensionless.
Step 6 Repeat Step 5 for each of the remaining
nonrepeating variables.
8
Example: Finding pi terms
Step 7 Check all the resulting pi terms to make
sure they are dimensionless and independent.
Step 8 Rearrange the pi terms to simplify the
problem or to correspond to customary usage.
Step 9 Express the final form as a relationship
among the pi terms and think about what it means.
9
Dimensionless parameters:
Reynolds number
Image copyright unknown
Image credit:
https://commons.wikimedia.org/wiki/File:
Canary_A2002186_1155_250m.jpg
10
Dimensionless parameters:
Froude number
Image source:
https://dowehaveenoughwaterbowr
iver.weebly.com
Image source: https://www.hikebiketravel.com
11
Example 7.1: Finding pi terms
12
Example 7.1 cont’d
13