• Three-part images – macroscopic, molecular, and symbolic – help students see the
connections between the formulas they write down, the world they see around them, and
the atoms and molecules that compose that world. These have now been revised to include
figure captions as an instructor’s voice and, in more complex images, to track from left to
right.
• A consistent problem-solving approach – Sort, Strategize, Solve, and Check – in
a two- or three-column format helps students understand both the concept of and the
solution to the problem.
• Conceptual Questions, 10–12 in each chapter, encourage active learning and hold
students accountable for reading assignments, with over 60 new to this edition.
Chemistry
Chemistry
Features
A Molecular Approach
In Chemistry: A Molecular Approach, Nivaldo Tro draws on his award-winning teaching to
illustrate for students why a knowledge of chemistry is important in their careers, lives, and
the world, with the simple goal of engaging them in active learning not just during but also
before and after class.
GLOBAL
EDITION
GLOB AL
EDITION
GLOBAL
EDITION
This is a special edition of an established title widely used by colleges and
universities throughout the world. Pearson published this exclusive edition
for the benefit of students outside the United States and Canada. If you
purchased this book within the United States or Canada, you should be aware
that it has been imported without the approval of the Publisher or Author.
A Molecular Approach
FIFTH EDITION
Nivaldo J. Tro
• NEW! Missed This? – a feature added to the self-assessment and end-of-chapter problems
that lists the resources that students can use to learn how to answer the question.
Available separately for purchase is Mastering Chemistry, the teaching and learning platform
that empowers instructors to personalize learning for every student. Combined with trusted
educational content, Mastering Chemistry helps students and instructors achieve their learning
outcomes measurably.
Mastering Chemistry for Chemistry: A Molecular Approach includes
FIFTH
EDITION
• NEW! How To… – a feature that lists the steps for essentials like drawing Lewis structures
and naming compounds in a consistent, step-by-step, numbered approach.
• a complete library of 3- to 6-minute Key Concept Videos spanning virtually all
topics in general chemistry, with 16 videos new to this edition.
CVR_TRO8902_05_GE_CVR.indd 1
Tro
• a video library of 3- to 6-minute Interactive Worked Examples, each walking the
students through the solution to a chemistry problem, with 24 examples new to this edition.
10/08/20 5:58 PM
List of Elements with Their Symbols and Atomic Masses
Element
Actinium
Aluminum
Americium
Antimony
Argon
Arsenic
Astatine
Barium
Berkelium
Beryllium
Bismuth
Bohrium
Boron
Bromine
Cadmium
Calcium
Californium
Carbon
Cerium
Cesium
Chlorine
Chromium
Cobalt
Copernicium
Copper
Curium
Darmstadtium
Dubnium
Dysprosium
Einsteinium
Erbium
Europium
Fermium
Flerovium
Fluorine
Francium
Gadolinium
Gallium
Germanium
Gold
Hafnium
Hassium
Helium
Holmium
Hydrogen
Indium
Iodine
Iridium
Iron
Krypton
Lanthanum
Lawrencium
Lead
Lithium
Livermorium
Lutetium
Magnesium
Manganese
Meitnerium
Symbol
Ac
Al
Am
Sb
Ar
As
At
Ba
Bk
Be
Bi
Bh
B
Br
Cd
Ca
Cf
C
Ce
Cs
Cl
Cr
Co
Cn
Cu
Cm
Ds
Db
Dy
Es
Er
Eu
Fm
Fl
F
Fr
Gd
Ga
Ge
Au
Hf
Hs
He
Ho
H
In
I
Ir
Fe
Kr
La
Lr
Pb
Li
Lv
Lu
Mg
Mn
Mt
Atomic
Number
89
13
95
51
18
33
85
56
97
4
83
107
5
35
48
20
98
6
58
55
17
24
27
112
29
96
110
105
66
99
68
63
100
114
9
87
64
31
32
79
72
108
2
67
1
49
53
77
26
36
57
103
82
3
116
71
12
25
109
Atomic Mass
227.03a
26.98
243.06a
121.76
39.95
74.92
209.99a
137.33
247.07a
9.012
208.98
264.12a
10.81
79.90
112.41
40.08
251.08a
12.01
140.12
132.91
35.45
52.00
58.93
285a
63.55
247.07a
271a
262.11a
162.50
252.08a
167.26
151.96
257.10a
289a
19.00
223.02a
157.25
69.72
72.63
196.97
178.49
269.13a
4.003
164.93
1.008
114.82
126.90
192.22
55.85
83.80
138.91
262.11a
207.2
6.94
292a
174.97
24.31
54.94
268.14a
Element
Mendelevium
Mercury
Molybdenum
Moscovium
Neodymium
Neon
Neptunium
Nickel
Nihonium
Niobium
Nitrogen
Nobelium
Oganesson
Osmium
Oxygen
Palladium
Phosphorus
Platinum
Plutonium
Polonium
Potassium
Praseodymium
Promethium
Protactinium
Radium
Radon
Rhenium
Rhodium
Roentgenium
Rubidium
Ruthenium
Rutherfordium
Samarium
Scandium
Seaborgium
Selenium
Silicon
Silver
Sodium
Strontium
Sulfur
Tantalum
Technetium
Tellurium
Tennessine
Terbium
Thallium
Thorium
Thulium
Tin
Titanium
Tungsten
Uranium
Vanadium
Xenon
Ytterbium
Yttrium
Zinc
Zirconium
Symbol
Md
Hg
Mo
Mc
Nd
Ne
Np
Ni
Nh
Nb
N
No
Og
Os
O
Pd
P
Pt
Pu
Po
K
Pr
Pm
Pa
Ra
Rn
Re
Rh
Rg
Rb
Ru
Rf
Sm
Sc
Sg
Se
Si
Ag
Na
Sr
S
Ta
Tc
Te
Ts
Tb
Tl
Th
Tm
Sn
Ti
W
U
V
Xe
Yb
Y
Zn
Zr
Atomic
Number
101
80
42
115
60
10
93
28
113
41
7
102
118
76
8
46
15
78
94
84
19
59
61
91
88
86
75
45
111
37
44
104
62
21
106
34
14
47
11
38
16
73
43
52
117
65
81
90
69
50
22
74
92
23
54
70
39
30
40
Selected Key Equations
Atomic Mass
258.10a
200.59
95.95
289a
144.24
20.18
237.05a
58.69
284a
92.91
14.01
259.10a
294a
190.23
16.00
106.42
30.97
195.08
244.06a
208.98a
39.10
140.91
145a
231.04
226.03a
222.02a
186.21
102.91
272a
85.47
101.07
261.11a
150.36
44.96
266.12a
78.97
28.09
107.87
22.99
87.62
32.06
180.95
98a
127.60
294a
158.93
204.38
232.04
168.93
118.71
47.87
183.84
238.03
50.94
131.293
173.05
88.91
65.38
91.22
Density (1.6)
m
d =
V
De Broglie Relation (8.4)
h
l =
mn
Arrhenius Equation (15.5)
Solution Dilution (5.2)
Heisenberg’s Uncertainty
Principle (8.4)
h
∆x * m ∆v Ú
4p
lnk = -
M1 V1 = M2 V2
Ideal Gas Law (6.4)
PV = nRT
-Ea
k = A e RT
Dalton’s Law (6.6)
Energy of Hydrogen Atom
Levels (8.5)
Ptotal = Pa + Pb + Pc + c
En = - 2.18 * 10 -18 J ¢
Mole Fraction (6.6)
na
xa =
ntotal
Average Kinetic Energy (6.8)
3
KEavg = RT
2
-Ea
k = pz e RT
3 RT
A M
MB
rate A
=
rate B
A MA
Van der Waals Equation (6.10)
n 2
c P + a a b d * [V - nb] = nRT
V
Kinetic Energy (7.2)
1
KE = mv 2
2
(collision theory)
Kp = Kc(RT )∆n
≤ (n = 1, 2, 3 c)
pH Scale (17.5)
pH = -log[H3O + ]
Coulomb’s Law (9.3)
1 q1 q2
E =
4 peo r
Henderson–Hasselbalch
Equation (18.2)
[base]
pH = pKa + log
[acid]
Dipole Moment (10.6)
Clausius–Clapeyron Equation (12.5)
- ∆Hvap
ln Pvap =
+ ln b
RT
Entropy (19.3)
S = k lnW
Henry’s Law (14.4)
Change in the Entropy of the
Surroundings (19.5)
- ∆Hsys
∆Ssurr =
T
Sgas = kH Pgas
Change in Gibbs Free Energy (19.6)
Raoult’s Law (14.6)
∆G = ∆H - T ∆S
- ∆Hvap 1
P2
1
J
ln
=
R
P1
R
T2
T1
Effusion (6.9)
(linearized form)
Kc and Kp (16.4)
m = qr
Root Mean Square Velocity (6.8)
urms =
1
n2
Ea 1
a b + lnA
R T
Psolution = xsolvent P s°olvent
Freezing Point Depression (14.6)
The Change in Free Energy:
Nonstandard Conditions (19.9)
∆Tf = m * Kf
∆Grxn = ∆G°rxn + RT ln Q
∆E = q + w
Boiling Point Elevation
Constant (14.6)
𝚫G°rxn and K (19.10)
Heat Capacity (7.4)
∆Tb = m * Kb
Internal Energy (7.3)
q = m * Cs * ∆T
w = -P ∆V
Change in Enthalpy (7.6)
∆H = ∆E + P ∆V
Standard Enthalpy of Reaction
(7.9)
∆H r°xn = a np ∆H f° (products) -
a nr ∆H f° (reactants)
Frequency and Wavelength (8.2)
c
n =
l
w = MRT
hc
l
lnK = -
The Rate Law (15.3)
Rate = k[A]n
(single reactant)
Rate = k[A]m[B]n
(multiple reactants)
Order
0
Integrated
Rate Law
[A]t = - kt + [A]0
1
ln[A]t = - kt + ln[A]0
2
1
1
= kt +
[A]t
[A]0
∆H r°xn 1
∆S r°xn
a b +
R
T
R
𝚫G° and E°cell (20.5)
∆G ° = -nF E cell
°
E°cell and K (20.5)
Integrated Rate Laws and
Half-Life (15.4)
Energy of a Photon (8.2)
E =
Temperature Dependence of the
Equilibrium Constant (19.10)
Osmotic Pressure (14.6)
Pressure-Volume Work (7.4)
E = hn
∆G°rxn = -RT ln K
Half-Life
Expression
t1>2 =
[A]0
2k
t1>2 =
0.693
k
t1>2 =
1
k[A]0
E cell
° =
0.0592 V
log K
n
Nernst Equation (20.6)
Ecell = E°cell -
0.0592 V
log Q
n
Einstein’s Energy-Mass
Equation (21.8)
E = mc 2
a
Mass of longest-lived or most important isotope.
CVR_TRO8902_05_GE_IFC_IBC.indd 1
10/08/20 6:28 PM
A01_TRO8902_05_GE_FM.indd 1
25/08/2020 23:57
7
6
5
4
3
2
1
4
Be
9.012
12
Mg
24.31
20
Ca
40.08
38
Sr
87.62
56
Ba
137.33
88
Ra
[226.03]
3
Li
6.94
11
Na
22.99
19
K
39.10
37
Rb
85.47
55
Cs
132.91
87
Fr
[223.02]
50.94
47.87
40
Zr
44.96
39
Y
[261.11]
104
Rf
89
Ac
[227.03]
180.95
178.49
138.91
59
Pr
140.91
91
Pa
231.04
58
Ce
140.12
90
Th
232.04
238.03
92
U
144.24
60
Nd
[264.12]
107
Bh
186.21
75
Re
[98]
43
Tc
54.94
7B
7
25
Mn
[237.05]
93
Np
[145]
61
Pm
[269.13]
108
Hs
190.23
76
Os
101.07
44
Ru
55.85
8
26
Fe
Transition metals
Metalloids
[244.06]
94
Pu
150.36
62
Sm
[268.14]
109
Mt
192.22
77
Ir
102.91
45
Rh
58.93
8B
9
27
Co
[272]
64
Gd
157.25
96
Cm
[247.07]
63
Eu
151.96
95
Am
[243.06]
111
Rg
196.97
79
Au
[271]
110
Ds
195.08
78
Pt
107.87
47
Ag
46
Pd
106.42
63.55
58.69
10
28
Ni
1B
11
29
Cu
Nonmetals
[247.07]
97
Bk
158.93
65
Tb
[285]
112
Cn
200.59
80
Hg
112.41
48
Cd
65.38
2B
12
30
Zn
[251.08]
98
Cf
162.50
[252.08]
99
Es
164.93
67
Ho
[289]
[284]
66
Dy
114
Fl
207.2
82
Pb
118.71
50
Sn
113
Nh
204.38
81
Tl
114.82
49
In
72.63
32
Ge
69.72
28.09
31
Ga
14
Si
26.98
12.01
13
Al
4A
14
6
C
10.81
5
B
3A
13
[257.10]
100
Fm
167.26
68
Er
[289]
115
Mc
208.98
83
Bi
121.76
51
Sb
74.92
33
As
30.97
15
P
14.01
5A
15
7
N
by the International Union of Pure and Applied Chemistry.
Atomic masses in brackets are the masses of the longest-lived or most important isotope of radioactive elements.
[258.10]
101
Md
168.93
69
Tm
[292]
116
Lv
[208.98]
84
Po
127.60
52
Te
78.97
34
Se
32.06
16
S
16.00
8
O
6A
16
Main groups
a The labels on top (1A, 2A, etc.) are common American usage. The labels below these (1, 2, etc.) are those recommended
Actinide series
[266.12]
[262.11]
106
Sg
183.84
74
W
73
Ta
72
Hf
105
Db
95.95
92.91
91.22
57
La
42
Mo
52.00
6B
6
24
Cr
88.91
41
Nb
5B
5
23
V
4B
4
22
Ti
Metals
3B
3
21
Sc
Lanthanide series
2A
2
1.008
1Aa
1
1
H
Main groups
[259.10]
102
No
173.05
70
Yb
[294]
117
Ts
[209.99]
85
At
126.90
53
I
79.90
35
Br
35.45
17
Cl
19.00
9
F
7A
17
[262.11]
103
Lr
174.97
71
Lu
[294]
118
Og
[222.02]
86
Rn
131.29
54
Xe
83.80
36
Kr
39.95
18
Ar
20.18
10
Ne
4.003
8A
18
2
He
This page is intentionally left blank
A01_TRO8902_05_GE_FM.indd 2
25/08/2020 23:57
FIFTH EDITION
Chemistry
A MOLECULAR APPROACH
GLOBAL EDITION
Nivaldo J. Tro
A01_TRO8902_05_GE_FM.indd 3
25/08/2020 23:57
Pearson Education Limited
KAO Two
KAO Park
Hockham Way
Harlow
Essex
CM17 9SR
United Kingdom
and Associated Companies throughout the world
Visit us on the World Wide Web at: www.pearsonglobaleditions.com
© Pearson Education Limited, 2021
The rights of Nivaldo J. Tro to be identified as the author of this work has been asserted by him in
accordance with the Copyright, Designs and Patents Act 1988.
Authorized adaptation from the United States edition, entitled Chemistry: A Molecular Approach, 5th
Edition, ISBN 978-0-13-487437-1 by Nivaldo J. Tro, published by Pearson Education © 2020.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording or
otherwise, without either the prior written permission of the publisher or a license permitting
restricted copying in the United Kingdom issued by the Copyright Licensing Agency Ltd, Saffron
House, 6–10 Kirby Street, London EC1N 8TS.
All trademarks used herein are the property of their respective owners. The use of any trademark in
this text does not vest in the author or publisher any trademark ownership rights in such trademarks,
nor does the use of such trademarks imply any affiliation with or endorsement of this book by such
owners. For information regarding permissions, request forms, and the appropriate contacts within
the Pearson Education Global Rights and Permissions department, please visit
www.pearsoned.com/permissions.
This eBook is a standalone product and may or may not include all assets that were part of the print
version. It also does not provide access to other Pearson digital products like MyLab and Mastering.
The publisher reserves the right to remove any material in this eBook at any time.
British Library Cataloguing-in-Publication Data
A catalogue record for this book is available from the British Library
ISBN 10: 1-292-34890-9
ISBN 13: 978-1-292-34890-2
eBook ISBN 13: 978-1-292-34901-5
Typeset by SPi Global
About
the Author
Nivaldo Tro has been teaching college Chemistry since 1990 and
is currently teaching at Santa Barbara City College. He received his Ph.D.
in chemistry from Stanford University for work on developing and using
optical techniques to study the adsorption and desorption of molecules to
and from surfaces in ultrahigh vacuum. He then went on to the University
of California at Berkeley, where he did postdoctoral research on ultrafast
reaction dynamics in solution. Professor Tro has been awarded grants
from the American Chemical Society Petroleum Research Fund, the
Research Corporation, and the National Science Foundation to study the
dynamics of various processes occurring in thin adlayer films adsorbed on
dielectric surfaces. Professor Tro lives in Santa Barbara with his wife, Ann,
and their four children, Michael, Ali, Kyle, and Kaden. In his leisure time,
Professor Tro enjoys mountain biking, surfing, and being outdoors with
his family.
To Michael, Ali,
Kyle, and Kaden
5
A01_TRO8902_05_GE_FM.indd 5
25/08/2020 23:57
Brief
Contents
1
2
3
4
5
6
7
8
9
10
11
Matter, Measurement, and Problem Solving
Atoms and Elements
Molecules and Compounds
Chemical Reactions and Chemical Quantities
Introduction to Solutions and Aqueous Reactions
Gases
Thermochemistry
The Quantum-Mechanical Model of the Atom
Periodic Properties of the Elements
Chemical Bonding I: The Lewis Model
Chemical Bonding II: Molecular Shapes,
Valence Bond Theory, and Molecular Orbital Theory
Liquids, Solids, and Intermolecular Forces
Solids and Modern Materials
Solutions
Chemical Kinetics
Chemical Equilibrium
Acids and Bases
Aqueous Ionic Equilibrium
Free Energy and Thermodynamics
Electrochemistry
Radioactivity and Nuclear Chemistry
Organic Chemistry
Biochemistry
Chemistry of the Nonmetals
Metals and Metallurgy
Transition Metals and Coordination Compounds
478
536
582
620
672
724
772
828
888
938
988
1030
1078
1112
1150
1176
Appendix I Common Mathematical Operations in Chemistry
Appendix II Useful Data
Appendix III Answers to Selected Exercises
Appendix IV Answers to In-Chapter Practice Problems
Glossary
Photo and Text Credits
Index
A-1
A-5
A-15
A-53
G-1
C-1
I-1
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
42
90
132
180
208
252
304
352
392
434
6
A01_TRO8902_05_GE_FM.indd 6
25/08/2020 23:57
Interactive Media Contents
in Mastering Chemistry
KEY CONCEPT VIDEOS (KCVs)
Atoms and Molecules
Classifying Matter
Units and Significant Figures
Significant Figures in Calculations
Solving Chemical Problems
Atomic Theory
Subatomic Particles and Isotope Symbols
The Periodic Law and the Periodic Table
The Mole Concept
Naming Ionic Compounds
Naming Molecular Compounds
Writing and Balancing Chemical Equations
Reaction Stoichiometry
Limiting Reactant, Theoretical Yield, and
Percent Yield
5.2 Solution Concentration
5.5 Reactions in Solutions
6.3 Simple Gas Laws and Ideal Gas Law
6.6 Mixtures of Gases and Partial Pressures
6.8 Kinetic Molecular Theory
7.3 The First Law of Thermodynamics
7.4 Heat Capacity
7.6 The Change in Enthalpy for a Chemical Reaction
7.9 Determining the Enthalpy of Reaction from
Standard Enthalpies of Formation
8.2 The Nature of Light
8.4 The Wave Nature of Matter
8.5A Quantum Mechanics and the Atom: Orbitals and
Quantum Numbers
8.5B Atomic Spectroscopy
9.3 Electron Configurations
9.4 Writing an Electron Configuration Based on an
Element’s Position on the Periodic Table
9.6 Periodic Trends in the Size of Atoms and Effective
Nuclear Charge
10.5 The Lewis Model for Chemical Bonding
10.6 Electronegativity and Bond Polarity
10.7 Writing Lewis Structures for Molecular Compounds
10.8 Resonance and Formal Charge
10.9 Exceptions to the Octet Rule and Expanded Octets
11.2 VSEPR Theory
11.3 VSEPR Theory: The Effect of Lone Pairs
11.5 Molecular Shape and Polarity
1.1
1.3
1.6
1.7
1.8
2.3
2.6
2.7
2.9
3.5
3.6
4.2
4.3
4.4
Valence Bond Theory
Valence Bond Theory: Hybridization
Intermolecular Forces
Vaporization and Vapor Pressure
Heating Curve for Water
Phase Diagrams
Unit Cells: Simple Cubic, Body-Centered Cubic,
and Face-Centered Cubic
14.4 Solution Equilibrium and the Factors Affecting
Solubility
14.5 Solution Concentration: Molarity, Molality, Parts by
Mass and Volume, Mole Fraction
14.6 Colligative Properties
15.2 The Rate of a Chemical Reaction
15.3 The Rate Law for a Chemical Reaction
15.4 The Integrated Rate Law
15.5 The Effect of Temperature on Reaction Rate
15.6 Reaction Mechanisms
16.3 The Equilibrium Constant
16.7 The Reaction Quotient
16.8 Finding Equilibrium Concentrations from Initial
Concentrations
16.9 Le Châtelier’s Principle
17.3 Definitions of Acids and Bases
17.4 Acid Strength and the Acid Ionization Constant
17.5 The pH Scale
17.6 Finding the [H3O + ] and pH of Strong and Weak
Acid Solutions
17.8 The Acid–Base Properties of Ions and Salts
18.2A Buffers
18.2B Finding pH and pH Changes in Buffer Solutions
18.4A The Titration of a Strong Acid with a Strong Base
18.4B The Titration of a Weak Acid and a Strong Base
19.3 Entropy and the Second Law of Thermodynamics
19.6 The Effect of ∆H, ∆S, and T on Reaction
Spontaneity
19.7 Standard Molar Entropies
20.3 Voltaic Cells
20.4 Standard Electrode Potentials
20.5 Cell Potential, Free Energy, and the Equilibrium
Constant
21.3 Types of Radioactivity
11.6
11.7
12.3
12.5
12.7
12.8
13.3
7
A01_TRO8902_05_GE_FM.indd 7
25/08/2020 23:57
8
INTERACTIVE MEDIA CONTENTS IN MASTERING CHEMISTRY
INTERACTIVE WORKED EXAMPLES (IWEs)
1.5
1.6
1.8
1.9
1.10
1.12
2.3
2.5
2.8
2.9
3.3
3.11
3.13
3.15
3.16
3.18
3.21
4.2
4.3
4.4
4.6
5.1
5.2
5.3
5.4
5.5
5.6
5.9
5.11
5.13
6.5
6.7
6.8
6.10
6.11
6.12
6.15
7.2
7.3
7.5
7.7
7.8
7.9
Determining the Number of Significant Figures in a
Number
Significant Figures in Calculations
Unit Conversion
Unit Conversions Involving Units Raised to a Power
Density as a Conversion Factor
Problems with Equations
Atomic Numbers, Mass Numbers, and Isotope
Symbols
Atomic Mass
The Mole Concept—Converting between Mass and
Number of Atoms
The Mole Concept
Writing Formulas for Ionic Compounds
Using the Nomenclature Flowchart to Name
Compounds
The Mole Concept—Converting between
Mass and Number of Molecules
Using Mass Percent Composition as a Conversion
Factor
Chemical Formulas as Conversion Factors
Obtaining an Empirical Formula from
Experimental Data
Determining an Empirical Formula from
Combustion Analysis
Balancing Chemical Equations
Balancing Chemical Equations Containing a
Polyatomic Ion
Stoichiometry
Limiting Reactant and Theoretical Yield
Calculating Solution Concentration
Using Molarity in Calculations
Solution Dilution
Solution Stoichiometry
Predicting Whether an Ionic Compound Is Soluble
Writing Equations for Precipitation Reactions
Writing Equations for Acid–Base Reactions
Involving a Strong Acid
Acid–Base Titration
Assigning Oxidation States
Ideal Gas Law I
Density
Molar Mass of a Gas
Partial Pressures and Mole Fractions
Collecting Gases over Water
Gases in Chemical Reactions
Graham’s Law of Effusion
Temperature Changes and Heat Capacity
Thermal Energy Transfer
Measuring ∆Erxn in a Bomb Calorimeter
Stoichiometry Involving ∆H
Measuring ∆Hrxn in a Coffee-Cup Calorimeter
Hess’s Law
A01_TRO8902_05_GE_FM.indd 8
7.11
8.2
8.3
8.5
8.7
9.2
9.4
9.5
9.6
9.8
10.4
10.6
10.7
10.8
10.9
10.10
10.11
11.1
11.2
11.4
11.5
11.8
11.10
12.1
12.2
12.3
12.5
13.3
13.4
14.2
14.3
14.4
14.5
14.6
14.9
14.12
15.1
15.2
15.4
15.8
15.9
16.1
∆H°rxn and Standard Enthalpies of Formation
Photon Energy
Wavelength, Energy, and Frequency
Quantum Numbers I
Wavelength of Light for a Transition in the
Hydrogen Atom
Writing Orbital Diagrams
Writing Electron Configurations from the
Periodic Table
Atomic Size
Electron Configurations and Magnetic Properties
for Ions
First Ionization Energy
Writing Lewis Structures
Writing Lewis Structures for Polyatomic Ions
Writing Resonance Structures
Assigning Formal Charges
Drawing Resonance Structures and Assigning
Formal Charge for Organic Compounds
Writing Lewis Structures for Compounds Having
Expanded Octets
Calculating ∆Hrxn from Bond Energies
VSEPR Theory and the Basic Shapes
Predicting Molecular Geometries
Predicting the Shape of Larger Molecules
Determining Whether a Molecule Is Polar
Hybridization and Bonding Scheme
Molecular Orbital Theory
Dipole–Dipole Forces
Hydrogen Bonding
Using the Heat of Vaporization in Calculations
Using the Two-Point Form of the Clausius–
Clapeyron Equation to Predict the Vapor Pressure
at a Given Temperature
Relating Unit Cell Volume, Edge Length, and
Atomic Radius
Relating Density to Crystal Structure
Henry’s Law
Using Parts by Mass in Calculations
Calculating Concentrations
Converting between Concentration Units
Calculating the Vapor Pressure of a Solution
Containing a Nonelectrolyte and Nonvolatile Solute
Boiling Point Elevation
Calculating the Vapor Pressure of a Solution
Containing an Ionic Solute
Expressing Reaction Rates
Determining the Order and Rate Constant of a
Reaction
The First-Order Integrated Rate Law: Determining
the Concentration of a Reactant at a Given Time
Using the Two-Point Form of the Arrhenius Equation
Reaction Mechanisms
Expressing Equilibrium Constants for Chemical
Equations
25/08/2020 23:57
9
INTERACTIVE MEDIA CONTENTS IN MASTERING CHEMISTRY
16.3
16.5
16.7
16.8
16.9
16.12
16.14
17.1
17.3
17.5
17.7
17.8
17.9
17.12
17.14
17.16
18.2
18.3
A01_TRO8902_05_GE_FM.indd 9
Relating Kp and Kc
Finding Equilibrium Constants from Experimental
Concentration Measurements
Predicting the Direction of a Reaction by
Comparing Q and K
Finding Equilibrium Concentrations When You
Know the Equilibrium Constant and All but One of
the Equilibrium Concentrations of the Reactants
and Products
Finding Equilibrium Concentrations from Initial
Concentrations and the Equilibrium Constant
Finding Equilibrium Concentrations from Initial
Concentrations in Cases with a Small Equilibrium
Constant
The Effect of a Concentration Change on Equilibrium
Identifying Brønsted–Lowry Acids and Bases and
Their Conjugates
Calculating pH from [H3O + ] or [OH - ]
Finding the [H3O + ] of a Weak Acid Solution
Finding the pH of a Weak Acid Solution in Cases
Where the x is small Approximation Does Not Work
Finding the Equilibrium Constant from pH
Finding the Percent Ionization of a Weak Acid
Finding the [OH - ] and pH of a Weak Base Solution
Determining the pH of a Solution Containing an
Anion Acting as a Base
Determining the Overall Acidity or Basicity of
Salt Solutions
Calculating the pH of a Buffer Solution as an
Equilibrium Problem and with the Henderson–
Hasselbalch Equation
Calculating the pH Change in a Buffer Solution
after the Addition of a Small Amount of Strong
Acid or Base
Using the Henderson–Hasselbalch Equation to
Calculate the pH of a Buffer Solution Composed
of a Weak Base and Its Conjugate Acid
18.6 Strong Acid–Strong Base Titration pH Curve
18.7 Weak Acid–Strong Base Titration pH Curve
18.8 Calculating Molar Solubility from Ksp
18.12 Predicting Precipitation Reactions by Comparing
Q and Ksp
19.2 Calculating ∆S for a Change of State
19.3 Calculating Entropy Changes in
the Surroundings
19.4 Calculating Gibbs Free Energy Changes and
Predicting Spontaneity from ∆H and ∆S
19.5 Calculating Standard Entropy Changes (∆S°rxn)
19.6 Calculating the Standard Change in Free Energy
for a Reaction Using ∆G°rxn = ∆H°rxn - T∆S°rxn
19.10 Calculating ∆Grxn under Nonstandard
Conditions
19.11 The Equilibrium Constant and ∆G°rxn
20.2 Half-Reaction Method of Balancing Aqueous
Redox Equations in Acidic Solution
20.3 Balancing Redox Reactions Occurring in
Basic Solution
20.4 Calculating Standard Potentials for
Electrochemical Cells from Standard Electrode
Potentials of the Half-Reactions
20.6 Relating ∆G° and E°cell
21.1 Writing Nuclear Equations for Alpha Decay
21.2 Writing Nuclear Equations for Beta Decay,
Positron Emission, and Electron Capture
21.4 Radioactive Decay Kinetics
21.5 Radiocarbon Dating
22.3 Naming Alkanes
18.4
25/08/2020 23:57
Contents
EXERCISES Review Questions 81 Problems by Topic 81
Cumulative Problems 85 Challenge Problems 87
Conceptual Problems 87 Questions for Group Work 88
Data Interpretation and Analysis 88 Answers to Conceptual
Connections 89
P R E FA C E 23
1
Matter, Measurement,
and Problem Solving 42
1.1 Atoms and Molecules 43
1.2 The Scientific Approach to Knowledge 45
2
Atoms and Elements
90
THE NATURE OF SCIENCE Thomas S. Kuhn and
Scientific Revolutions 47
1.3 The Classification of Matter 47
The States of Matter: Solid, Liquid, and Gas 48
Classifying Matter by Composition: Elements, Compounds,
and Mixtures 49 Separating Mixtures 50
1.4 Physical and Chemical Changes and Physical
and Chemical Properties 51
1.5 Energy: A Fundamental Part of Physical and
Chemical Change 54
1.6 The Units of Measurement 55
Standard Units 56 The Meter: A Measure of
Length 56 The Kilogram: A Measure of Mass 56
The Second: A Measure of Time 56 The Kelvin:
A Measure of Temperature 57 Prefix Multipliers 59
Derived Units: Volume and Density 59 Volume 60
Density 60 Calculating Density 61
CHEMISTRY AND MEDICINE Bone Density 62
1.7 The Reliability of a Measurement 62
Counting Significant Figures 64 Exact Numbers 64
Significant Figures in Calculations 65 Precision and
Accuracy 67
CHEMISTRY IN YOUR DAY Integrity in Data Gathering 68
1.8 Solving Chemical Problems 68
Converting from One Unit to Another 68 General
Problem-Solving Strategy 70 Units Raised to a
Power 72 Order-of-Magnitude Estimations 73
Problems Involving an Equation 74
1.9 Analyzing and Interpreting Data 75
Identifying Patterns in Data 75 Interpreting Graphs 76
CHAPTER IN REVIEW Self-Assessment Quiz 78
Concepts 80 Equations and Relationships 80
Learning Outcomes 80
Terms 79
2.1 Brownian Motion: Atoms Confirmed 91
2.2 Early Ideas about the Building Blocks of
Matter 93
2.3 Modern Atomic Theory and the Laws
That Led to It 93
The Law of Conservation of Mass 93 The Law of Definite
Proportions 94 The Law of Multiple Proportions 95
John Dalton and the Atomic Theory 96
CHEMISTRY IN YOUR DAY Atoms and Humans 96
2.4 The Discovery of the Electron 97
Cathode Rays 97 Millikan’s Oil Drop Experiment:
The Charge of the Electron 98
2.5 The Structure of the Atom 99
2.6 Subatomic Particles: Protons, Neutrons, and
Electrons in Atoms 101
Elements: Defined by Their Numbers of Protons 102
Isotopes: When the Number of Neutrons Varies 103
Ions: Losing and Gaining Electrons 105
CHEMISTRY IN YOUR DAY Where Did Elements
Come From? 106
2.7 Finding Patterns: The Periodic Law and the
Periodic Table 107
Modern Periodic Table Organization 108
Ions and the Periodic Table 110
CHEMISTRY AND MEDICINE The Elements of Life
111
2.8 Atomic Mass: The Average Mass of an
Element’s Atoms 111
Mass Spectrometry: Measuring the Mass of Atoms and
Molecules 112
CHEMISTRY IN YOUR DAY Evolving Atomic Masses 114
A01_TRO8902_05_GE_FM.indd 10
25/08/2020 23:58
11
CONTENTS
2.9 Molar Mass: Counting Atoms by
Weighing Them 115
3.9 Composition of Compounds 155
The Mole: A Chemist’s “Dozen” 115 Converting
between Number of Moles and Number of Atoms 116
Converting between Mass and Amount
(Number of Moles) 117
CHAPTER IN REVIEW Self-Assessment Quiz 120 Terms 121
Concepts 122 Equations and Relationships 122
Learning Outcomes 123
EXERCISES Review Questions 123 Problems by Topic 124
Cumulative Problems 127 Challenge Problems 128
Conceptual Problems 129 Questions for Group Work 130
Data Interpretation and Analysis 130 Answers to Conceptual
Connections 131
3
Molecules and Compounds
132
Mass Percent Composition as a Conversion Factor 156
Conversion Factors from Chemical Formulas 158
CHEMISTRY AND MEDICINE Methylmercury in Fish 160
3.10 Determining a Chemical Formula from
Experimental Data 160
Determining Molecular Formulas for Compounds
Combustion Analysis 163
162
3.11 Organic Compounds 165
Hydrocarbons
166
Functionalized Hydrocarbons 167
CHAPTER IN REVIEW Self-Assessment Quiz 169 Terms 170
Concepts 170 Equations and Relationships 171
Learning Outcomes 171
EXERCISES Review Questions 171 Problems by
Topic 172 Cumulative Problems 176 Challenge
Problems 177 Conceptual Problems 177 Questions for Group
Work 178 Data Interpretation and Analysis 178 Answers to
Conceptual Connections 178
4
Chemical Reactions and
Chemical Quantities 180
4.1 Climate Change and the Combustion of
Fossil Fuels 181
4.2 Writing and Balancing Chemical Equations 183
4.3 Reaction Stoichiometry: How Much
Carbon Dioxide? 187
Making Pizza: The Relationships among Ingredients 187
Making Molecules: Mole-to-Mole Conversions 188
Making Molecules: Mass-to-Mass Conversions 188
3.1 Hydrogen, Oxygen, and Water 133
3.2 Chemical Bonds 135
Ionic Bonds
135 Covalent Bonds
136
3.3 Representing Compounds: Chemical Formulas
and Molecular Models 136
Types of Chemical Formulas
Molecular Models 138
136
3.4 An Atomic-Level View of Elements and
Compounds 138
3.5 Ionic Compounds: Formulas and Names 142
Writing Formulas for Ionic Compounds 142 Naming
Ionic Compounds 143 Naming Binary Ionic Compounds
Containing a Metal That Forms Only One Type of
Cation 144 Naming Binary Ionic Compounds Containing
a Metal That Forms More Than One Kind of
Cation 145 Naming Ionic Compounds Containing
Polyatomic Ions 146 Hydrated Ionic Compounds 147
4.4 Stoichiometric Relationships: Limiting Reactant,
Theoretical Yield, Percent Yield, and
Reactant in Excess 191
Calculating Limiting Reactant, Theoretical Yield, and
Percent Yield 193 Calculating Limiting Reactant,
Theoretical Yield, and Percent Yield from Initial
Reactant Masses 194
4.5 Three Examples of Chemical Reactions:
Combustion, Alkali Metals, and Halogens 197
Combustion Reactions 197
Halogen Reactions 198
Alkali Metal Reactions
198
CHAPTER IN REVIEW Self-Assessment Quiz 200 Terms 201
Concepts 201 Equations and Relationships 201
Learning Outcomes 201
EXERCISES Review Questions 202 Problems by Topic 202
Cumulative Problems 205 Challenge Problems 206 Conceptual
Problems 206 Questions for Group Work 207 Data
Interpretation and Analysis 207 Answers to Conceptual
Connections 207
3.6 Molecular Compounds:
Formulas and Names 148
Naming Molecular Compounds 148 Naming Acids 149
Naming Binary Acids 150 Naming Oxyacids 150
CHEMISTRY IN THE ENVIRONMENT Acid Rain 150
3.7 Summary of Inorganic Nomenclature 151
3.8 Formula Mass and the Mole Concept for
Compounds 153
Molar Mass of a Compound 153 Using Molar Mass to
Count Molecules by Weighing 153
A01_TRO8902_05_GE_FM.indd 11
25/08/2020 23:58
12
CONTENTS
5
Introduction to Solutions and
Aqueous Reactions 208
CHEMISTRY IN YOUR DAY Extra-Long Snorkels 261
Avogadro’s Law: Volume and Amount (in Moles) 263
6.4 The Ideal Gas Law 264
6.5 Applications of the Ideal Gas Law: Molar
Volume, Density, and Molar Mass of a Gas 267
Molar Volume at Standard Temperature and Pressure
Density of a Gas 268 Molar Mass of a Gas 269
267
6.6 Mixtures of Gases and Partial Pressures 270
Deep-Sea Diving and Partial Pressures
Collecting Gases over Water 275
273
6.7 Gases in Chemical Reactions:
Stoichiometry Revisited 277
Molar Volume and Stoichiometry 278
ANALYZING AND INTERPRETING DATA Good News
about Our Nation’s Air Quality 280
5.1 Molecular Gastronomy and the
Spherified Cherry 209
5.2 Solution Concentration 210
6.8 Kinetic Molecular Theory:
A Model for Gases 280
How Kinetic Molecular Theory Explains Pressure and the
Simple Gas Laws 281 Kinetic Molecular Theory and the
Ideal Gas Law 282 Temperature and Molecular
Velocities 284
Solution Concentration 210 Using Molarity in
Calculations 212 Solution Dilution 213
5.3 Solution Stoichiometry 215
5.4 Types of Aqueous Solutions and Solubility 217
Electrolyte and Nonelectrolyte Solutions 217
The Solubility of Ionic Compounds 219
5.5 Precipitation Reactions 221
5.6 Representing Aqueous Reactions: Molecular,
Ionic, and Net Ionic Equations 225
5.7 Acid–Base Reactions 227
Acid–Base Reactions 227 Acid–Base Titrations 231
5.8 Gas-Evolution Reactions 233
5.9 Oxidation–Reduction Reactions 235
Oxidation States 236 Identifying Redox
Reactions 238 The Activity Series: Predicting Whether a
Redox Reaction Is Spontaneous 240
CHEMISTRY IN YOUR DAY Bleached Blonde 241
6.9 Mean Free Path, Diffusion, and
Effusion of Gases 287
6.10 Real Gases: The Effects of Size and
Intermolecular Forces 288
The Effect of the Finite Volume of Gas Particles 289
The Effect of Intermolecular Forces 290 Van der Waals
Equation 291 Real Gases 291
CHAPTER IN REVIEW Self-Assessment Quiz 292 Terms 293
Concepts 293 Equations and Relationships 294
Learning Outcomes 294
EXERCISES Review Questions 295 Problems by Topic 295
Cumulative Problems 299 Challenge Problems 301
Conceptual Problems 302 Questions for Group Work 302
Data Interpretation and Analysis 302 Answers to Conceptual
Connections 303
CHAPTER IN REVIEW Self-Assessment Quiz 243 Terms 244
Concepts 244 Equations and Relationships 245
Learning Outcomes 245
EXERCISES Review Questions 246 Problems by Topic 246
Cumulative Problems 248 Challenge Problems 249
Conceptual Problems 249 Questions for Group Work 250
Data Interpretation and Analysis 250 Answers to Conceptual
Connections 251
6
Gases
252
7
6.1 Supersonic Skydiving and the Risk of
Decompression 253
6.2 Pressure: The Result of Molecular
Collisions 254
Pressure Units 255 The Manometer: A Way to Measure
Pressure in the Laboratory 256
CHEMISTRY AND MEDICINE Blood Pressure 257
6.3 The Simple Gas Laws: Boyle’s Law, Charles’s
Law, and Avogadro’s Law 257
Boyle’s Law: Volume and Pressure 258
Charles’s Law: Volume and Temperature
A01_TRO8902_05_GE_FM.indd 12
260
Thermochemistry
304
7.1 Chemical Hand Warmers 305
7.2 The Nature of Energy: Key Definitions 306
Types of Energy 306 Energy Conservation and
Energy Transfer 307 Units of Energy 307
7.3 The First Law of Thermodynamics:
There Is No Free Lunch 309
Internal Energy 309
CHEMISTRY IN YOUR DAY Redheffer’s Perpetual Motion
Machine 309
Heat and Work 312
25/08/2020 23:58
13
CONTENTS
8.3 Atomic Spectroscopy and the Bohr Model 364
CHEMISTRY IN YOUR DAY Atomic Spectroscopy,
a Bar Code for Atoms 366
8.4 The Wave Nature of Matter: The de Broglie
Wavelength, the Uncertainty Principle, and
Indeterminacy 367
The de Broglie Wavelength 369 The Uncertainty
Principle 370 Indeterminacy and Probability
Distribution Maps 371
8.5 Quantum Mechanics and the Atom 373
Solutions to the Schrödinger Equation for the Hydrogen
Atom 373 Atomic Spectroscopy Explained 376
8.6 The Shapes of Atomic Orbitals 379
s Orbitals (l = 0) 379 p Orbitals (I = 1) 382
d Orbitals (I = 2) 382 f Orbitals (I = 3) 382
The Phase of Orbitals 383 The Shape of Atoms 384
7.4 Quantifying Heat and Work 314
Heat 314 Temperature Changes and
Heat Capacity 314 Thermal Energy Transfer
Work: Pressure–Volume Work 318
316
7.5 Measuring ∆E for Chemical Reactions:
Constant-Volume Calorimetry 320
7.6 Enthalpy: The Heat Evolved in a Chemical
Reaction at Constant Pressure 323
Exothermic and Endothermic Processes: A Molecular
View 325 Stoichiometry Involving ∆H:
Thermochemical Equations 325
CHAPTER IN REVIEW Self-Assessment Quiz 384 Terms 385
Concepts 385 Equations and Relationships 386
Learning Outcomes 386
EXERCISES Review Questions 386 Problems by
Topic 387 Cumulative Problems 388 Challenge
Problems 389 Conceptual Problems 390 Questions for
Group Work 390 Data Interpretation and Analysis 391
Answers to Conceptual Connections 391
7.7 Constant-Pressure Calorimetry:
Measuring ∆Hrxn 327
7.8 Relationships Involving ∆Hrxn 328
7.9 Determining Enthalpies of Reaction from
Standard Enthalpies of Formation 331
Standard States and Standard Enthalpy Changes
Calculating the Standard Enthalpy Change for a
Reaction 333
331
7.10 Energy Use and the Environment 336
Energy Consumption 336 Environmental Problems
Associated with Fossil Fuel Use 337 Air
Pollution 337 Global Climate Change 338
CHEMISTRY IN THE ENVIRONMENT Renewable
Energy 340
CHAPTER IN REVIEW Self-Assessment Quiz 341 Terms 342
Concepts 342 Equations and Relationships 343
Learning Outcomes 343
EXERCISES Review Questions 344 Problems by
Topic 344 Cumulative Problems 348 Challenge
Problems 349 Conceptual Problems 350 Questions for
Group Work 350 Data Interpretation and Analysis 351
Answers to Conceptual Connections 351
8
The Quantum-Mechanical Model
of the Atom 352
8.1 Schrödinger’s Cat 353
8.2 The Nature of Light 354
The Wave Nature of Light 355
The Electromagnetic Spectrum 357
CHEMISTRY AND MEDICINE Radiation Treatment for
Cancer 359
Interference and Diffraction 359 The Particle Nature of
Light 360
A01_TRO8902_05_GE_FM.indd 13
9
Periodic Properties of the
Elements 392
9.1 Nerve Signal Transmission 393
9.2 The Development of the Periodic Table 394
9.3 Electron Configurations: How Electrons
Occupy Orbitals 395
Electron Spin and the Pauli Exclusion
Principle 396 Sublevel Energy Splitting in Multielectron
Atoms 396 Coulomb’s Law 397 Shielding 398
Penetration 398 Electron Spatial Distributions and
Sublevel Splitting 398 Electron Configurations for
Multielectron Atoms 400
9.4 Electron Configurations, Valence Electrons, and
the Periodic Table 403
Orbital Blocks in the Periodic Table 404 Writing an
Electron Configuration for an Element from Its Position in
the Periodic Table 405 The Transition and Inner
Transition Elements 406
25/08/2020 23:59
14
CONTENTS
10.5 Covalent Bonding: Lewis Structures 446
Single Covalent Bonds 446 Double and Triple Covalent
Bonds 446 Covalent Bonding: Models and Reality 447
10.6 Electronegativity and Bond Polarity 448
Electronegativity 449 Bond Polarity, Dipole Moment,
and Percent Ionic Character 450
10.7 Lewis Structures of Molecular Compounds and
Polyatomic Ions 452
Writing Lewis Structures for Molecular Compounds
Writing Lewis Structures for Polyatomic Ions 454
452
10.8 Resonance and Formal Charge 454
Resonance
454
Formal Charge 456
10.9 Exceptions to the Octet Rule: Odd-Electron
Species, Incomplete Octets, and
Expanded Octets 459
9.5 The Explanatory Power of the
Quantum-Mechanical Model 407
9.6 Periodic Trends in the Size of Atoms and
Effective Nuclear Charge 408
Odd-Electron Species 460 Incomplete Octets 460
CHEMISTRY IN THE ENVIRONMENT Free Radicals and
the Atmospheric Vacuum Cleaner 461
Expanded Octets 462
10.10 Bond Energies and Bond Lengths 464
Bond Energy 464 Using Average Bond Energies to
Estimate Enthalpy Changes for Reactions 465
Bond Lengths 466
Effective Nuclear Charge 410 Atomic Radii and the
Transition Elements 411
9.7 Ions: Electron Configurations, Magnetic
Properties, Ionic Radii, and Ionization
Energy 413
Electron Configurations and Magnetic Properties of
Ions 413 Ionic Radii 415 Ionization Energy 417
Trends in First Ionization Energy 417 Exceptions to
Trends in First Ionization Energy 419 Trends in Second
and Successive Ionization Energies 420
9.8 Electron Affinities and Metallic Character 421
Electron Affinity 421 Metallic Character 422
9.9 Periodic Trends Summary 425
CHAPTER IN REVIEW Self-Assessment Quiz 425 Terms 426
Concepts 426 Equations and Relationships 427
Learning Outcomes 427
10.11 Bonding in Metals: The Electron
Sea Model 467
CHEMISTRY IN THE ENVIRONMENT The Lewis Structure
of Ozone 468
CHAPTER IN REVIEW Self-Assessment Quiz 469 Terms 470
Concepts 470 Equations and Relationships 471
Learning Outcomes 471
EXERCISES Review Questions 472 Problems by Topic 472
Cumulative Problems 474 Challenge Problems 476
Conceptual Problems 476 Questions for Group Work 476
Data Interpretation and Analysis 477 Answers to Conceptual
Connections 477
EXERCISES Review Questions 428 Problems by
Topic 429 Cumulative Problems 430 Challenge
Problems 431 Conceptual Problems 432 Questions for
Group Work 432 Data Interpretation and Analysis 433
Answers to Conceptual Connections 433
10
Chemical Bonding I:
The Lewis Model 434
10.1
10.2
10.3
10.4
Bonding Models and AIDS Drugs 435
Types of Chemical Bonds 436
Representing Valence Electrons with Dots 438
Ionic Bonding: Lewis Symbols and
Lattice Energies 439
Ionic Bonding and Electron Transfer 439 Lattice Energy:
The Rest of the Story 440 The Born–Haber Cycle 440
Trends in Lattice Energies: Ion Size 443 Trends in Lattice
Energies: Ion Charge 443 Ionic Bonding: Models and
Reality 444
CHEMISTRY AND MEDICINE Ionic Compounds in
Medicine 445
A01_TRO8902_05_GE_FM.indd 14
11
Chemical Bonding II: Molecular
Shapes, Valence Bond Theory, and
Molecular Orbital Theory 478
11.1 Morphine: A Molecular Imposter 479
11.2 VSEPR Theory: The Five Basic Shapes 480
Two Electron Groups: Linear Geometry 481
Three Electron Groups: Trigonal Planar Geometry 481
Four Electron Groups: Tetrahedral Geometry 481
Five Electron Groups: Trigonal Bipyramidal Geometry 483
Six Electron Groups: Octahedral Geometry 483
25/08/2020 23:59
15
CONTENTS
12
Liquids, Solids, and Intermolecular
Forces 536
12.1 Water, No Gravity 537
12.2 Solids, Liquids, and Gases: A Molecular
Comparison 538
Differences between States of Matter
Changes between States 540
538
12.3 Intermolecular Forces: The Forces That Hold
Condensed States Together 541
Dispersion Force 542 Dipole–Dipole Force 544
Hydrogen Bonding 547 Ion–Dipole Force 549
CHEMISTRY AND MEDICINE Hydrogen Bonding
in DNA 550
11.3 VSEPR Theory: The Effect of Lone Pairs 484
Four Electron Groups with Lone Pairs 484 Five Electron
Groups with Lone Pairs 486 Six Electron Groups with
Lone Pairs 487
11.4 VSEPR Theory: Predicting Molecular
Geometries 489
Representing Molecular Geometries on
Paper 491 Predicting the Shapes of Larger
Molecules 491
11.5 Molecular Shape and Polarity 492
Vector Addition 494
CHEMISTRY IN YOUR DAY How Soap Works 496
11.6 Valence Bond Theory: Orbital Overlap as a
Chemical Bond 497
11.7 Valence Bond Theory: Hybridization of Atomic
Orbitals 499
sp3 Hybridization 500 sp2 Hybridization and
Double Bonds 502
CHEMISTRY IN YOUR DAY The Chemistry of Vision 506
sp Hybridization and Triple Bonds 506 sp3d and sp3d 2
Hybridization 508 Writing Hybridization and Bonding
Schemes 509
11.8 Molecular Orbital Theory:
Electron Delocalization 512
Linear Combination of Atomic Orbitals (LCAOs) 513
Period Two Homonuclear Diatomic Molecules 517
Second-Period Heteronuclear Diatomic Molecules 522
Polyatomic Molecules 524
CHAPTER IN REVIEW Self-Assessment Quiz 525 Terms 526
Concepts 526 Equations and Relationships 526
Learning Outcomes 527
12.4 Intermolecular Forces in Action: Surface
Tension, Viscosity, and Capillary Action 551
Surface Tension 551 Viscosity 553
CHEMISTRY IN YOUR DAY Viscosity and Motor Oil 553
Capillary Action 553
12.5 Vaporization and Vapor Pressure 554
The Process of Vaporization 554 The Energetics of
Vaporization 556 Vapor Pressure and Dynamic
Equilibrium 557 Temperature Dependence of Vapor
Pressure and Boiling Point 559 The Clausius–Clapeyron
Equation 560 The Critical Point: The Transition to an
Unusual State of Matter 563
12.6 Sublimation and Fusion 564
Sublimation 564 Fusion
and Freezing 565
565
Energetics of Melting
12.7 Heating Curve for Water 566
12.8 Phase Diagrams 569
The Major Features of a Phase Diagram 569 Navigation
within a Phase Diagram 570 The Phase Diagrams of
Other Substances 571
12.9 Water: An Extraordinary Substance 571
CHEMISTRY IN THE ENVIRONMENT Water
Pollution 573
CHAPTER IN REVIEW Self-Assessment Quiz 573 Terms 574
Concepts 574 Equations and Relationships 575
Learning Outcomes 575
EXERCISES Review Questions 576 Problems by
Topic 576 Cumulative Problems 579 Challenge
Problems 579 Conceptual Problems 580 Questions for
Group Work 580 Data Interpretation and Analysis 581
Answers to Conceptual Connections 581
EXERCISES Review Questions 527 Problems by
Topic 528 Cumulative Problems 530 Challenge
Problems 532 Conceptual Problems 533 Questions for
Group Work 533 Data Interpretation and Analysis 534
Answers to Conceptual Connections 534
A01_TRO8902_05_GE_FM.indd 15
25/08/2020 23:59
16
13
CONTENTS
14.3 Energetics of Solution Formation 628
Solids and Modern Materials
582
Energy Changes in Solution Formation 628
Solutions and Heats of Hydration 630
Aqueous
14.4 Solution Equilibrium and Factors Affecting
Solubility 631
The Temperature Dependence of the Solubility of
Solids 633 Factors Affecting the Solubility of
Gases in Water 633
14.5 Expressing Solution Concentration 636
CHEMISTRY IN THE ENVIRONMENT Lake Nyos 636
Molarity 637 Molality 638 Parts by Mass and Parts by
Volume 638 Using Parts by Mass (or Parts by Volume) in
Calculations 639 Mole Fraction and Mole Percent 640
CHEMISTRY IN THE ENVIRONMENT The Dirty Dozen 640
14.6 Colligative Properties: Vapor Pressure
Lowering, Freezing Point Depression, Boiling
Point Elevation, and Osmotic Pressure 643
13.1 Friday Night Experiments:
The Discovery of Graphene 583
13.2 X-Ray Crystallography 584
13.3 Unit Cells and Basic Structures 587
Cubic Unit Cells
587
Closest-Packed Structures
593
14.7 Colligative Properties of Strong Electrolyte
Solutions 655
13.4 The Fundamental Types of
Crystalline Solids 594
Strong Electrolytes and Vapor Pressure 656
Colligative Properties and Medical Solutions 657
Molecular Solids 595
CHEMISTRY IN YOUR DAY Chocolate, An
Edible Material 596
Ionic Solids 597 Atomic Solids 597
14.8 Colloids 658
13.5 The Structures of Ionic Solids 598
13.6 Network Covalent Atomic Solids: Carbon and
Silicates 600
Carbon
600 Silicates 603
13.7 Ceramics, Cement, and Glass 603
Ceramics
Vapor Pressure Lowering 644 Vapor Pressures of
Solutions Containing a Volatile (Nonelectrolyte) Solute 647
Freezing Point Depression and Boiling Point Elevation 650
CHEMISTRY IN YOUR DAY Antifreeze in Frogs 653
Osmotic Pressure 653
603 Cement 604 Glass
605
13.8 Semiconductors and Band Theory 605
CHAPTER IN REVIEW Self-Assessment Quiz 661 Terms 662
Concepts 662 Equations and Relationships 663
Learning Outcomes 663
EXERCISES Review Questions 664 Problems by Topic 665
Cumulative Problems 668 Challenge Problems 669
Conceptual Problems 670 Questions for Group Work 670
Data Interpretation and Analysis 671 Answers to Conceptual
Connections 671
Molecular Orbitals and Energy Bands 605 Doping:
Controlling the Conductivity of Semiconductors 607
13.9 Polymers and Plastics 607
CHEMISTRY IN YOUR DAY Kevlar
610
CHAPTER IN REVIEW Self-Assessment Quiz 611
Terms 612 Concepts 612 Equations and Relationships 613
Learning Outcomes 613
EXERCISES Review Questions 613 Problems by
Topic 614 Cumulative Problems 617 Challenge
Problems 618 Conceptual Problems 618 Questions for Group
Work 618 Data Interpretation and Analysis 619 Answers to
Conceptual Connections 619
14
Solutions
620
14.1 Thirsty Solutions: Why You Shouldn’t Drink
Seawater 621
14.2 Types of Solutions and Solubility 623
Nature’s Tendency toward Mixing: Entropy
The Effect of Intermolecular Forces 624
A01_TRO8902_05_GE_FM.indd 16
624
25/08/2020 23:59
17
CONTENTS
16
Chemical Equilibrium
724
16.1 Fetal Hemoglobin and Equilibrium 725
16.2 The Concept of Dynamic Equilibrium 727
16.3 The Equilibrium Constant (K) 730
Expressing Equilibrium Constants for Chemical
Reactions 730
The Significance of the Equilibrium Constant 731
CHEMISTRY AND MEDICINE Life and Equilibrium 732
Relationships between the Equilibrium Constant and the
Chemical Equation 733
16.4 Expressing the Equilibrium Constant in
Terms of Pressure 734
Relationship Between Kp and Kc 735
15
Chemical Kinetics
672
15.1 Catching Lizards 673
15.2 The Rate of a Chemical Reaction 674
Definition of Reaction Rate
Rates 678
674 Measuring Reaction
15.3 The Rate Law: The Effect of Concentration on
Reaction Rate 679
The Three Common Reaction Orders (n = 0, 1, and 2) 679
Determining the Order of a Reaction 680 Reaction
Order for Multiple Reactants 682
15.4 The Integrated Rate Law: The Dependence of
Concentration on Time 684
The Integrated Rate Law 684 The Half-Life of a
Reaction 688
15.5 The Effect of Temperature on
Reaction Rate 692
The Arrhenius Equation 692 The Activation Energy,
Frequency Factor, and Exponential Factor 693 Arrhenius
Plots: Experimental Measurements of the Frequency Factor
and the Activation Energy 694 The Collision Model:
A Closer Look at the Frequency Factor 697
15.6 Reaction Mechanisms 698
Rate Laws for Elementary Steps 699 Rate-Determining
Steps and Overall Reaction Rate Laws 700
Mechanisms with a Fast Initial Step 701
Units of K
736
16.5 Heterogeneous Equilibria: Reactions Involving
Solids and Liquids 737
16.6 Calculating the Equilibrium Constant from
Measured Equilibrium Concentrations 738
16.7 The Reaction Quotient: Predicting the Direction
of Change 741
16.8 Finding Equilibrium Concentrations 743
Finding Equilibrium Concentrations from the Equilibrium
Constant and All but One of the Equilibrium
Concentrations of the Reactants and Products 744
Finding Equilibrium Concentrations from the Equilibrium
Constant and Initial Concentrations or Pressures 745
Simplifying Approximations in Working Equilibrium
Problems 749
16.9 Le Châtelier’s Principle: How a System at
Equilibrium Responds to Disturbances 753
The Effect of a Concentration Change on Equilibrium 754
The Effect of a Volume (or Pressure) Change on
Equilibrium 756 The Effect of a Temperature Change on
Equilibrium 758
CHAPTER IN REVIEW Self-Assessment Quiz 760 Terms 761
Concepts 761 Equations and Relationships 762
Learning Outcomes 762
EXERCISES Review Questions 763 Problems by Topic 764
Cumulative Problems 767 Challenge Problems 769
Conceptual Problems 769 Questions for Group Work 770
Data Interpretation and Analysis 770 Answers to Conceptual
Connections 771
15.7 Catalysis 703
Homogeneous and Heterogeneous Catalysis 705
Enzymes: Biological Catalysts 706
CHEMISTRY AND MEDICINE Enzyme Catalysis and the
Role of Chymotrypsin in Digestion 708
CHAPTER IN REVIEW Self-Assessment Quiz 709 Terms 711
Concepts 711 Equations and Relationships 712
Learning Outcomes 712
EXERCISES Review Questions 712 Problems by Topic 713
Cumulative Problems 718 Challenge Problems 720 Conceptual
Problems 721 Questions for Group Work 722 Data
Interpretation and Analysis 722 Answers to Conceptual
Connections 723
A01_TRO8902_05_GE_FM.indd 17
25/08/2020 23:59
18
17
CONTENTS
Acids and Bases
18
772
Aqueous Ionic Equilibrium
828
18.1 The Danger of Antifreeze 829
18.2 Buffers: Solutions That Resist pH Change 830
Calculating the pH of a Buffer Solution 832 The
Henderson–Hasselbalch Equation 833 Calculating pH
Changes in a Buffer Solution 836 The Stoichiometry
Calculation 836 The Equilibrium Calculation 836
Buffers Containing a Base and Its Conjugate Acid 840
18.3 Buffer Effectiveness: Buffer Range and
Buffer Capacity 841
Relative Amounts of Acid and Base 841 Absolute
Concentrations of the Acid and Conjugate Base 842
Buffer Range 843
CHEMISTRY AND MEDICINE Buffer Effectiveness in
Human Blood 844
Buffer Capacity 844
17.1 Heartburn 773
17.2 The Nature of Acids and Bases 774
17.3 Definitions of Acids and Bases 776
The Arrhenius Definition
Definition 777
776
18.4 Titrations and pH Curves 845
The Titration of a Strong Acid with a Strong Base 846
The Titration of a Weak Acid with a Strong Base 850
The Titration of a Weak Base with a Strong Acid 855
The Titration of a Polyprotic Acid 856
Indicators: pH-Dependent Colors 856
The Brønsted–Lowry
17.4 Acid Strength and the Acid Ionization
Constant (Ka) 779
Strong Acids 779 Weak Acids
Ionization Constant (Ka) 781
780 The Acid
18.5 Solubility Equilibria and the Solubility
Product Constant 859
17.5 Autoionization of Water and pH 782
The pH Scale: A Way to Quantify Acidity and Basicity
pOH and Other p Scales 785
CHEMISTRY AND MEDICINE Ulcers 786
784
17.6 Finding the [H3O+ ] and pH of Strong and
Weak Acid Solutions 787
18.6 Precipitation 865
Strong Acids 787 Weak Acids 787 Percent Ionization
of a Weak Acid 792 Mixtures of Acids 793
17.7 Base Solutions 796
Strong Bases 796 Weak Bases 796
Finding the [OH - ] and pH of Basic Solutions 798
CHEMISTRY AND MEDICINE What’s in My Antacid?
800
17.8 The Acid–Base Properties of Ions and Salts 800
Anions as Weak Bases 801 Cations as Weak Acids 804
Classifying Salt Solutions as Acidic, Basic, or Neutral 805
17.9 Polyprotic Acids 807
Finding the pH of Polyprotic Acid Solutions 808 Finding
the Concentration of the Anions for a Weak Diprotic Acid
Solution 810
17.10 Acid Strength and Molecular Structure 812
Binary Acids
812 Oxyacids
813
17.11 Lewis Acids and Bases 814
Molecules That Act as Lewis Acids
as Lewis Acids 815
Ksp and Molar Solubility 859
CHEMISTRY IN YOUR DAY Hard Water 861
Ksp and Relative Solubility 862 The Effect of a Common
Ion on Solubility 862 The Effect of pH on Solubility 864
814 Cations That Act
Selective Precipitation
866
18.7 Qualitative Chemical Analysis 868
Group 1: Insoluble Chlorides 869 Group 2: AcidInsoluble Sulfides 869 Group 3: Base-Insoluble Sulfides
and Hydroxides 870 Group 4: Insoluble
Phosphates 870 Group 5: Alkali Metals and NH4 + 870
18.8 Complex Ion Equilibria 871
The Effect of Complex Ion Equilibria on Solubility 873
The Solubility of Amphoteric Metal Hydroxides 874
CHAPTER IN REVIEW Self-Assessment Quiz 875 Terms 876
Concepts 876 Equations and Relationships 877
Learning Outcomes 877
EXERCISES Review Questions 878 Problems by Topic 879
Cumulative Problems 884 Challenge Problems 885 Conceptual
Problems 885 Questions for Group Work 886
Data Interpretation and Analysis 886 Answers to Conceptual
Connections 887
17.12 Acid Rain 815
Effects of Acid Rain
816 Acid Rain Legislation
817
CHAPTER IN REVIEW Self-Assessment Quiz 817 Terms 818
Concepts 818 Equations and Relationships 819
Learning Outcomes 820
EXERCISES Review Questions 820 Problems by Topic 821
Cumulative Problems 824 Challenge Problems 826 Conceptual
Problems 826 Questions for Group Work 826 Data
Interpretation and Analysis 826 Answers to Conceptual
Connections 827
A01_TRO8902_05_GE_FM.indd 18
25/08/2020 23:59
19
CONTENTS
19
Free Energy and
Thermodynamics
CHAPTER IN REVIEW Self-Assessment Quiz 926 Terms 927
Concepts 927 Equations and Relationships 928
Learning Outcomes 928
888
EXERCISES Review Questions 929 Problems by Topic 930
Cumulative Problems 933 Challenge Problems 934 Conceptual
Problems 935 Questions for Group Work 935 Data
Interpretation and Analysis 936 Answers to Conceptual
Connections 936
20
Electrochemistry
938
20.1 Lightning and Batteries 939
20.2 Balancing Oxidation–Reduction Equations 940
20.3 Voltaic (or Galvanic) Cells: Generating Electricity
from Spontaneous Chemical Reactions 943
The Voltaic Cell 944 Current and Potential
Difference 945 Anode, Cathode, and Salt Bridge
Electrochemical Cell Notation 947
19.1 Cold Coffee and Dead Universes 889
19.2 Spontaneous and Nonspontaneous
Processes 890
19.3 Entropy and the Second Law of
Thermodynamics 892
20.4 Standard Electrode Potentials 947
Predicting the Spontaneous Direction of an
Oxidation–Reduction Reaction 952 Predicting Whether
a Metal Will Dissolve in Acid 955
Entropy 894 The Entropy Change upon the Expansion
of an Ideal Gas 896
19.4 Entropy Changes Associated with State
Changes 898
Entropy and State Change: The Concept 899
and State Changes: The Calculation 900
Entropy
19.5 Heat Transfer and Changes in the Entropy of
the Surroundings 902
The Temperature Dependence of ∆Ssurr 903
Quantifying Entropy Changes in the Surroundings
903
19.6 Gibbs Free Energy 905
The Effect of ∆H, ∆S, and T on Spontaneity
946
906
19.7 Entropy Changes in Chemical Reactions:
Calculating ∆S°rxn 909
20.5 Cell Potential, Free Energy, and the Equilibrium
Constant 955
The Relationship between ∆G° and E°cell 956
The Relationship between E°cell and K 958
20.6 Cell Potential and Concentration 959
Cell Potential under Nonstandard Conditions: The Nernst
Equation 959 Concentration Cells 962
CHEMISTRY AND MEDICINE Concentration Cells in
Human Nerve Cells 964
20.7 Batteries: Using Chemistry to Generate
Electricity 964
Dry-Cell Batteries 964 Lead–Acid Storage
Batteries 965 Other Rechargeable Batteries 966
Fuel Cells 967
CHEMISTRY IN YOUR DAY The Fuel-Cell Breathalyzer 968
Defining Standard States and Standard Entropy
Changes 909 Standard Molar Entropies (S°) and the
Third Law of Thermodynamics 909 Calculating the
Standard Entropy Change (∆S°rxn) for a Reaction 913
20.8 Electrolysis: Driving Nonspontaneous Chemical
Reactions with Electricity 968
19.8 Free Energy Changes in Chemical Reactions:
Calculating ∆G°rxn 913
20.9 Corrosion: Undesirable Redox Reactions 975
Calculating Standard Free Energy Changes with
∆G°rxn = ∆H°rxn - T∆S°rxn 914 Calculating ∆G°rxn with
Tabulated Values of Free Energies of Formation 915
CHEMISTRY IN YOUR DAY Making a Nonspontaneous
Process Spontaneous 917
Calculating ∆G°rxn for a Stepwise Reaction from the
Changes in Free Energy for Each of the Steps 917
Why Free Energy Is “Free” 918
19.9 Free Energy Changes for Nonstandard States:
The Relationship between ∆G°rxn and ∆Grxn 920
Predicting the Products of Electrolysis
of Electrolysis 974
971 Stoichiometry
Corrosion of Iron 976 Preventing the Corrosion of Iron 977
CHAPTER IN REVIEW Self-Assessment Quiz 978 Terms 979
Concepts 979 Equations and Relationships 980
Learning Outcomes 980
EXERCISES Review Questions 981 Problems by Topic 981
Cumulative Problems 985 Challenge Problems 986 Conceptual
Problems 986 Questions for Group Work 986 Data
Interpretation and Analysis 987 Answers to Conceptual
Connections 987
Standard versus Nonstandard States 920 The Free
Energy Change of a Reaction under Nonstandard
Conditions 920 Standard Conditions 920
Equilibrium Conditions 921 Other Nonstandard
Conditions 922
19.10 Free Energy and Equilibrium: Relating
∆G°rxn to the Equilibrium Constant (K) 923
The Relationship between ∆G°rxn and K 923 The
Temperature Dependence of the Equilibrium Constant 925
A01_TRO8902_05_GE_FM.indd 19
26/08/2020 00:00
20
21
CONTENTS
EXERCISES Review Questions 1024 Problems by Topic 1024
Cumulative Problems 1026 Challenge Problems 1027 Conceptual
Problems 1028 Questions for Group Work 1028 Data Interpretation
and Analysis 1029 Answers to Conceptual Connections 1029
Radioactivity and Nuclear
Chemistry 988
22
Organic Chemistry
1030
22.1 Fragrances and Odors 1031
22.2 Carbon: Why It Is Unique 1032
CHEMISTRY IN YOUR DAY Vitalism and the Perceived
Differences between Organic and Inorganic
Compounds 1033
22.3 Hydrocarbons: Compounds Containing Only
Carbon and Hydrogen 1034
Drawing Hydrocarbon Structures 1035 Stereoisomerism and
Optical Isomerism 1037 Rotation of Polarized Light 1038
Chemical Behavior in a Chiral Environment 1039
22.4 Alkanes: Saturated Hydrocarbons 1040
Naming Alkanes
21.1 Diagnosing Appendicitis 989
21.2 The Discovery of Radioactivity 990
21.3 Types of Radioactivity 991
Alpha (a) Decay 992 Beta (b) Decay 993 Gamma (g)
Ray Emission 994 Positron Emission 994 Electron
Capture 995
21.4 The Valley of Stability: Predicting the Type of
Radioactivity 996
Magic Numbers 998
Radioactive Decay Series
1041
22.5 Alkenes and Alkynes 1044
998
21.5 Detecting Radioactivity 999
21.6 The Kinetics of Radioactive Decay and
Radiometric Dating 1000
The Integrated Rate Law 1002 Radiocarbon Dating:
Using Radioactivity to Measure the Age of Fossils and
Artifacts 1003
CHEMISTRY IN YOUR DAY Radiocarbon Dating and the
Shroud of Turin 1005
Uranium/Lead Dating 1005 The Age of Earth 1006
21.7 The Discovery of Fission: The Atomic Bomb and
Nuclear Power 1007
The Manhattan Project 1007 Nuclear Power: Using
Fission to Generate Electricity 1009 Problems with
Nuclear Power 1010
21.8 Converting Mass to Energy: Mass Defect and
Nuclear Binding Energy 1011
Mass Defect and Nuclear Binding Energy 1011
The Nuclear Binding Energy Curve 1013
21.9 Nuclear Fusion: The Power of the Sun 1013
21.10 Nuclear Transmutation and Transuranium
Elements 1014
21.11 The Effects of Radiation on Life 1016
Acute Radiation Damage 1016 Increased Cancer Risk 1016
Genetic Defects 1016 Measuring Radiation Exposure
and Dose 1017
Naming Alkenes and Alkynes 1045 Geometric
(Cis–Trans) Isomerism in Alkenes 1048
22.6 Hydrocarbon Reactions 1049
Reactions of Alkanes
Alkynes 1050
1049
Reactions of Alkenes and
22.7 Aromatic Hydrocarbons 1052
Naming Aromatic Hydrocarbons
Aromatic Compounds 1054
1052
Reactions of
22.8 Functional Groups 1055
22.9 Alcohols 1056
Naming Alcohols 1056 About Alcohols 1056
Alcohol Reactions 1056
22.10 Aldehydes and Ketones 1058
Naming Aldehydes and Ketones 1059 About Aldehydes
and Ketones 1059 Aldehyde and Ketone Reactions 1060
22.11 Carboxylic Acids and Esters 1061
Naming Carboxylic Acids and Esters 1061 About
Carboxylic Acids and Esters 1061 Carboxylic Acid and
Ester Reactions 1062
22.12 Ethers 1063
Naming Ethers 1063
About Ethers 1064
22.13 Amines 1064
Amine Reactions
1064
CHAPTER IN REVIEW Self-Assessment Quiz 1065 Terms 1066
Concepts 1066 Equations and Relationships 1067
Learning Outcomes 1068
EXERCISES Review Questions 1069 Problems by Topic 1069
Cumulative Problems 1074 Challenge Problems 1076
Conceptual Problems 1076 Questions for Group Work 1077
Data Interpretation and Analysis 1077 Answers to Conceptual
Connections 1077
21.12 Radioactivity in Medicine and Other
Applications 1018
Diagnosis in Medicine 1019 Radiotherapy in
Medicine 1020 Other Applications 1020
CHAPTER IN REVIEW Self-Assessment Quiz 1021 Terms 1022
Concepts 1022 Equations and Relationships 1023
Learning Outcomes 1023
A01_TRO8902_05_GE_FM.indd 20
26/08/2020 00:00
21
CONTENTS
23
Biochemistry
24
1078
Chemistry of the Nonmetals
1112
24.1 Insulated Nanowires 1113
24.2 The Main-Group Elements: Bonding and
Properties 1114
24.3 Silicates: The Most Abundant Matter in
Earth’s Crust 1116
Quartz 1116 Aluminosilicates 1117 Individual Silicate
Units, Silicate Chains, and Silicate Sheets 1117
24.4 Boron and Its Remarkable Structures 1120
Elemental Boron 1120 Boron–Halogen Compounds:
Trihalides 1121 Boron–Oxygen Compounds 1121
Boron–Hydrogen Compounds: Boranes 1122
24.5 Carbon, Carbides, and Carbonates 1123
Amorphous Carbon 1123 Carbides 1124
Oxides 1125 Carbonates 1126
24.6 Nitrogen and Phosphorus: Essential Elements
for Life 1127
23.1 Diabetes and the Synthesis of Human
Insulin 1079
23.2 Lipids 1080
Elemental Nitrogen and Phosphorus 1127 Nitrogen
Compounds 1128 Phosphorus Compounds 1131
24.7 Oxygen 1133
Fatty Acids 1080 Fats and Oils 1082 Other Lipids 1083
23.3 Carbohydrates 1085
Simple Carbohydrates: Monosaccharides and
Disaccharides 1085 Complex Carbohydrates
Amino Acids: The Building Blocks of Proteins 1089
Peptide Bonding between Amino Acids 1091
23.5 Protein Structure 1092
Primary Structure 1094 Secondary Structure 1094
Tertiary Structure 1095 Quaternary Structure 1096
23.6 Nucleic Acids: Blueprints for Proteins 1096
1096
23.7 DNA Replication, the Double Helix, and Protein
Synthesis 1100
DNA Replication and the Double Helix 1100
Protein Synthesis 1101
CHEMISTRY AND MEDICINE The Human Genome
Project 1102
CHAPTER IN REVIEW Self-Assessment Quiz 1103
Concepts 1104 Learning Outcomes 1105
Elemental Oxygen 1133 Uses for Oxygen 1134
Oxides 1134 Ozone 1135
24.8 Sulfur: A Dangerous but Useful Element 1135
1087
23.4 Proteins and Amino Acids 1088
The Basic Structure of Nucleic Acids
The Genetic Code 1098
Carbon
Elemental Sulfur 1136 Hydrogen Sulfide and Metal
Sulfides 1137 Sulfur Dioxide 1138 Sulfuric Acid 1138
24.9 Halogens: Reactive Elements with High
Electronegativity 1139
Elemental Fluorine and Hydrofluoric Acid 1140
Elemental Chlorine 1141 Halogen Compounds 1141
CHAPTER IN REVIEW Self-Assessment Quiz 1143
Concepts 1144 Learning Outcomes 1145
Terms 1144
EXERCISES Review Questions 1145 Problems by Topic 1145
Cumulative Problems 1147 Challenge Problems 1148
Conceptual Problems 1148 Questions for Group Work 1148
Data Interpretation and Analysis 1149 Answers to Conceptual
Connections 1149
Terms 1104
EXERCISES Review Questions 1106 Problems by Topic 1106
Cumulative Problems 1109 Challenge Problems 1110
Conceptual Problems 1110 Questions for Group Work 1110
Data Interpretation and Analysis 1111 Answers to Conceptual
Connections 1111
A01_TRO8902_05_GE_FM.indd 21
26/08/2020 00:00
22
25
CONTENTS
Metals and Metallurgy
26
1150
Transition Metals and Coordination
Compounds 1176
26.1 The Colors of Rubies and Emeralds 1177
26.2 Properties of Transition Metals 1178
Electron Configurations 1178 Atomic Size 1180
Ionization Energy 1180 Electronegativity 1181
Oxidation States 1181
26.3 Coordination Compounds 1182
Naming Coordination Compounds
1185
26.4 Structure and Isomerization 1187
Structural Isomerism 1187
Stereoisomerism 1189
26.5 Bonding in Coordination Compounds 1192
Valence Bond Theory
1192
Crystal Field Theory
1193
26.6 Applications of Coordination Compounds 1197
Chelating Agents 1198 Chemical Analysis 1198
Coloring Agents 1198 Biomolecules 1198
Hemoglobin and Cytochrome C 1199
25.1 Vanadium: A Problem and an
Opportunity 1151
25.2 The General Properties and Natural Distribution
of Metals 1152
25.3 Metallurgical Processes 1154
Separation 1154 Pyrometallurgy 1154
Hydrometallurgy 1155 Electrometallurgy 1156
Powder Metallurgy 1157
25.4 Metal Structures and Alloys 1158
Alloys 1158 Substitutional Alloys 1158 Alloys with
Limited Solubility 1160 Interstitial Alloys 1161
25.5 Sources, Properties, and Products of Some of
the 3d Transition Metals 1163
Titanium 1163 Chromium 1164 Manganese
Cobalt 1166 Copper 1167 Nickel 1167
Zinc 1168
1165
CHAPTER IN REVIEW Self-Assessment Quiz 1168 Terms 1170
Concepts 1170 Equations and Relationships 1170
Learning Outcomes 1171
EXERCISES Review Questions 1171 Problems by Topic 1171
Cumulative Problems 1173 Challenge Problems 1173
Conceptual Problems 1173 Questions for Group Work 1174
Data Interpretation and Analysis 1174 Answers to Conceptual
Connections 1175
CHAPTER IN REVIEW Self-Assessment Quiz 1201 Terms 1201
Concepts 1202 Equations and Relationships 1202
Learning Outcomes 1202
EXERCISES Review Questions 1203 Problems by Topic 1203
Cumulative Problems 1205 Challenge Problems 1205
Conceptual Problems 1206 Questions for Group Work 1206
Data Interpretation and Analysis 1206 Answers to Conceptual
Connections 1207
Appendix I
Common Mathematical Operations
in Chemistry A-1
Appendix II
Useful Data
A-5
Appendix III Answers to Selected Exercises A-15
Appendix IV Answers to In-Chapter Practice
Problems A-53
Glossary G-1
Photo and Text Credits
Index
A01_TRO8902_05_GE_FM.indd 22
C-1
I-1
26/08/2020 00:00
Preface
To the Student
As you begin this course, I invite you to think about your reasons for enrolling in it. Why are you taking general chemistry? More generally, why are you pursuing a college education?
If you are like most college students taking general chemistry,
part of your answer is probably that this course is required for
your major and that you are pursuing a college education so
you can get a good job some day. Although these are good reasons, I would like to suggest a better one. I think the primary
reason for your education is to prepare you to live a good life.
You should understand chemistry—not for what it can get
you—but for what it can do to you. Understanding chemistry,
I believe, is an important source of happiness and fulfillment.
Let me explain.
Understanding chemistry helps you to live life to its fullest for two basic reasons. The first is intrinsic: through an
understanding of chemistry, you gain a powerful appreciation for just how rich and extraordinary the world really is.
The second reason is extrinsic: understanding chemistry
makes you a more informed citizen—it allows you to engage
with many of the issues of our day. In other words, understanding chemistry makes you a deeper and richer person and
makes your country and the world a better place to live. These
reasons have been the foundation of education from the very
beginnings of civilization.
How does chemistry help prepare you for a rich life and
conscientious citizenship? Let me explain with two examples. My first one comes from the very first page of Chapter 1
of this book. There, I ask the following question: What is the
most important idea in all of scientific knowledge? My answer
to that question is this: the behavior of matter is determined by the properties of molecules and atoms. That
simple statement is the reason I love chemistry. We humans
have been able to study the substances that compose the
world around us and explain their behavior by reference to
particles so small that they can hardly be imagined. If you
have never realized the remarkable dependence of the world
we can see on the world we cannot, you have missed out on a
fundamental truth about our universe. To have never encountered this truth is like never having read a play by Shakespeare
or seen a sculpture by Michelangelo—or, for that matter, like
never having discovered that the world is round. It robs you
of an amazing and unforgettable experience of the world and
the human ability to understand it.
My second example demonstrates how science literacy
helps you to be a better citizen. Although I am largely sympathetic to the environmental movement, a lack of science literacy within some sectors of that movement and the resulting
anti-environmental backlash create confusion that impedes
real progress and opens the door to what could be misinformed policies. For example, I have heard conservative pundits say that volcanoes emit more carbon dioxide—the most
significant greenhouse gas—than does petroleum combustion. I have also heard a liberal environmentalist say that we
have to stop using hair spray because it is causing holes in the
ozone layer that will lead to global warming. Well, the claim
about volcanoes emitting more carbon dioxide than petroleum combustion can be refuted by the basic tools you will
learn to use in Chapter 4 of this book. We can easily show that
volcanoes emit only 1/50th as much carbon dioxide as petroleum combustion. As for hair spray depleting the ozone layer
and thereby leading to global warming, the chlorofluorocarbons that deplete ozone have been banned from hair spray
since 1978, and ozone depletion has nothing to do with global
warming anyway. People with special interests or axes to grind
can conveniently distort the truth before an ill-informed public, which is why we all need to be knowledgeable.
So this is why I think you should take this course. Not
just to satisfy the requirement for your major and not just to
get a good job some day, but to help you to lead a fuller life
and to make the world a little better for everyone. I wish you
the best as you embark on the journey to understanding the
world around you at the molecular level. The rewards are well
worth the effort.
To the Professor
First and foremost, thanks to all of you who adopted this book
in its previous editions. You helped to make this book one of
the most popular general chemistry textbooks in the world. I
am grateful beyond words. Second, I have listened carefully to
your feedback on the previous edition. The changes you see in
this edition are the direct result of your input, as well as my
own experience using the book in my general chemistry
courses. If you have reviewed content or have contacted me
directly, you will likely see your suggestions reflected in the
changes I have made. Thank you.
Higher education in science is changing. Foremost
among those changes is a shift toward active learning. A flood
of recent studies has demonstrated that General Chemistry
students learn better when they are active in the learning
process. However, implementing active learning can be a difficult and time-consuming process. One of my main goals in
this revision is to give you, the professor, a range of tools to
easily implement active learning in your class. My goal is
23
A01_TRO8902_05_GE_FM.indd 23
26/08/2020 00:00
24
PREFACE
simple: I want to make it easy for you to engage your students in
active learning before class, during class, and after class.
■
BEFORE CLASS Although the term active learning
has been applied mainly to in-class learning, the main
idea—that we learn better when we are actively engaged—
applies to all of learning. I have developed two main
tools to help students prepare for class in an active way.
The first tool is a complete library of 3– to 6–minute
Key Concept Videos (KCVs) that, with this edition, span
virtually all of the key concepts in a general chemistry
course. The videos introduce a key concept and encourage active learning because they stop in the middle and
pose a question that must be answered before the video
continues playing. Each video also has an associated
follow-up question that can be assigned using Mastering Chemistry. You can assign a video before each one
of your classes to get your students thinking about the
concepts for that day. A second tool for use before class
is active reading. Each chapter in the book now contains
10–12 Conceptual Connection questions. These questions
are assignable in Mastering Chemistry, and contain
wrong answer feedback. Instead of passively reading the
assigned material with no accountability, you can now
encourage your students to engage in active reading, in
which they read a bit and then answer a question that
probes their comprehension and gives them immediate
feedback.
■
DURING CLASS By delivering some content through
key concept videos and active reading before class, you
can make room in your lecture to pose questions to your
students that make the class experience active as well.
This book features two main tools for in-class use. The
first tool is Learning Catalytics, which allows you to pose
many different types of questions to your students during class. Instead of passively listening to your lecture,
students interact with the concepts you present through
questions you pose. Your students can answer the questions individually, or you can pair them with a partner
or small group. A second tool for in-class use is the Questions for Group Work. These questions appear in the endof-chapter material and are specifically designed to be
answered in small groups.
■
AFTER CLASS Active learning can continue after class
with two additional tools. The first is another library of
3– to 6–minute videos called Interactive Worked Examples
(IWEs). Each IWE video walks a student through the
solution to a chemistry problem. Like the KCVs, the IWE
video stops in the middle and poses a question that must
be answered before the video continues playing. Each
video also has an associated follow-up problem that can
be assigned using Mastering Chemistry. The second tool
for after (or outside of) class active learning is Active Exam
Preparation. Research studies suggest that students who
take a pretest before an exam do better on the exam, especially if the pretest contains immediate feedback. Each
chapter in this book contains a Self-Assessment Quiz that
A01_TRO8902_05_GE_FM.indd 24
you can use to easily make a pretest for any of your exams.
The Self-Assessment Quizzes are assignable in Mastering
Chemistry, and contain wrong answer feedback. Simply
choose the questions that you want from each of the
quizzes that span the chapters on your exam, and you
can create an assignable pretest that students can use to
actively prepare for your exams.
Although we have added many active learning tools to this
edition and made other changes as well, the book’s goal
remains the same: to present a rigorous and accessible treatment
of general chemistry in the context of relevance. Teaching general
chemistry would be much easier if all of our students had
exactly the same level of preparation and ability. But alas, that
is not the case. My own courses are populated with students
with a range of backgrounds and abilities in chemistry. The
challenge of successful teaching, in my opinion, is figuring
out how to instruct and challenge the best students while not
losing those with lesser backgrounds and abilities. My strategy
has always been to set the bar relatively high, while at the
same time providing the motivation and support necessary to
reach the high bar. That is exactly the philosophy of this book.
We do not have to compromise rigor in order to make chemistry accessible to our students. In this book, I have worked hard
to combine rigor with accessibility—to create a book that does
not dilute the content and yet can be used and understood by
any student willing to put in the necessary effort.
Chemistry: A Molecular Approach is first and foremost a student-oriented book. My main goal is to motivate students and get them to achieve at the highest possible
level. As we all know, many students take general chemistry
because it is a requirement; they do not see the connection
between chemistry and their lives or their intended careers.
Chemistry: A Molecular Approach strives to make those connections consistently and effectively. Unlike other books, which
often teach chemistry as something that happens only in the
laboratory or in industry, this book teaches chemistry in the
context of relevance. It shows students why chemistry is
important to them, to their future careers, and to their world.
Second, Chemistry: A Molecular Approach is a
pedagogically driven book. In seeking to develop problemsolving skills, a consistent approach (Sort, Strategize, Solve,
and Check) is applied, usually in a two- or three-column format. In the two-column format, the left column shows the
student how to analyze the problem and devise a solution
strategy. It also lists the steps of the solution, explaining the
rationale for each one, while the right column shows the
implementation of each step. In the three-column format,
the left column outlines the general procedure for solving an
important category of problems that is then applied to two
side-by-side examples. This strategy allows students to see
both the general pattern and the slightly different ways in
which the procedure may be applied in differing contexts.
The aim is to help students understand both the concept of the
problem (through the formulation of an explicit conceptual
plan for each problem) and the solution to the problem.
Third, Chemistry: A Molecular Approach is a
visual book. Wherever possible, I use images to deepen the
26/08/2020 00:00
PREFACE
student’s insight into chemistry. In developing chemical
principles, multipart images help show the connection
between everyday processes visible to the unaided eye and
what atoms and molecules are actually doing. Many of these
images have three parts: macroscopic, molecular, and symbolic. This combination helps students to see the relationships between the formulas they write down on paper
(symbolic), the world they see around them (macroscopic),
and the atoms and molecules that compose that world
(molecular). In addition, most figures are designed to teach
rather than just to illustrate. They are rich with annotations
and labels intended to help the student grasp the most important processes and the principles that underlie them. In this
edition, the art program has been thoroughly revised in two
major ways. First, navigation of the more complex figures has
been reoriented to track from left to right whenever possible.
Second, figure captions have been migrated into the image
itself as an “author voice” that explains the image and guides
the reader through it. The resulting images are rich with
information but also clear and quickly understood.
Fourth, Chemistry: A Molecular Approach is a
“big-picture” book. At the beginning of each chapter, a
short paragraph helps students to see the key relationships
between the different topics they are learning. Through a
focused and concise narrative, I strive to make the basic ideas
of every chapter clear to the student. Interim summaries are
provided at selected spots in the narrative, making it easier to
grasp (and review) the main points of important discussions.
And to make sure that students never lose sight of the forest
for the trees, each chapter includes several Conceptual Connections, which ask them to think about concepts and solve
problems without doing any math. I want students to learn
the concepts, not just plug numbers into equations to churn
out the right answer. This philosophy is also integral to the
Key Concept Videos, which concisely reinforce student appreciation of the core concepts in each chapter.
Lastly, Chemistry: A Molecular Approach is a book
that delivers the depth of coverage faculty want. We
do not have to cut corners and water down the material in
order to get our students interested. We have to meet them
where they are, challenge them to the highest level of achievement, and support them with enough pedagogy to allow
them to succeed.
I hope that this book supports you in your vocation of
teaching students chemistry. I am increasingly convinced of
the importance of our task. Please feel free to contact me with
any questions or comments about the book.
Examples (IWEs) to the media package that accompanies
the book. The video library now contains nearly 200 interactive videos. These tools are designed to help professors
engage their students in active learning.
■
NEW IN-CHAPTER QUESTIONS WITH FEEDBACK I have added approximately 67 new Conceptual
Connection questions throughout the book and have
changed the format to multiple choice (with wrong
answer feedback in Mastering Chemistry). Each chapter now has 10–12 of these assignable questions. These
questions transform the reading process from passive
to active and hold students accountable for reading assignments.
■
NEW MISSED THIS? FEATURE I have added a new
feature called MISSED THIS? to the Self-Assessment Quizzes and to the Problems by Topic section of the end-ofchapter problems. This feature lists the resources that
students can use to learn how to answer the question or
solve the problem. The resources include chapter sections to read, Key Concept Videos (KCVs) to watch, and Interactive Worked Examples (IWEs) to view. Students often
try to solve an assigned question or problem before doing
any reading or reviewing; they seek resources only after
they have missed the question or problem. The MISSED
THIS? feature guides them to reliable resources that provide just-in-time instruction.
■
NEW FOR PRACTICE FEEDBACK I have enhanced
64 of the in-chapter For Practice problems (which immediately follow an in-chapter worked example) with feedback that can be accessed through Mastering Chemistry.
■
REVISED ART PROGRAM The art program has been
extensively revised. Navigation of the more complex
figures has been reoriented to track from left to right,
and many figure captions have been broken up and
have been moved into the image itself as an “author
voice” that explains the image and guides the reader
through it.
■
REVISED DATA INTERPRETATION AND ANALYSIS QUESTIONS The Data Interpretation and Analysis
questions that accompany each chapter have been extensively revised to make them clearer and more accessible
to students.
■
NEW SECTION ON DATA INTERPRETATION AND
ANALYSIS I have added a new section to Chapter 1
(Section 1.9) on the general topic of analyzing and interpreting data. This section introduces the skills required
to address many of the revised data interpretation and
analysis questions.
■
NEW HOW TO . . . FEATURE All guidance for essential
skills such as problem-solving techniques, drawing Lewis
structures, and naming compounds is now presented in
a consistent, step-by-step numbered list called How To…
■
REVISED CHAPTER 4 Chapter 4 in the previous edition covered both stoichiometry and chemical reactions in solution. In this edition, this content has been
Nivaldo J. Tro
nivatro@gmail.com
What’s New in This Edition?
The book has been extensively revised and contains more
small changes than can be detailed here. The most significant
changes to the book and its supplements are listed below:
■
NEW INTERACTIVE VIDEOS I have added 16 new
Key Concept Videos (KCVs) and 24 new Interactive Worked
A01_TRO8902_05_GE_FM.indd 25
25
26/08/2020 00:00
26
PREFACE
expanded slightly and has been divided into two more
focused chapters, so that Chapter 4 is now focused on
stoichiometry and Chapter 5 on chemical reactions in
solution. This new organization lessens the cognitive
load for students and allows each chapter to be more
direct and focused. All subsequent chapters have been
renumbered accordingly.
■
NEW ACTIVITY SERIES CONTENT I added a new
subsection to Section 5.9 entitled The Activity Series: Predicting Whether a Redox Reaction Is Spontaneous. The new
section includes new figures, tables, and a new worked
example.
■
NEW READY-TO-GO LEARNING MODULES These
online modules offer students easy access to the best
Tro content in Mastering Chemistry without needing to
have it assigned.
■
NEW TWO-TIER OBJECTIVES A system of two-tier
objectives is being applied to the text and to the Mastering Chemistry assets. The two tiers are Learning Objectives, or LOs, and Enabling Objectives, or EOs. The LOs
are broad, high-level objectives that summarize the overall learning goal, while the EOs are the building block
skills that enable students to achieve the LO. The learning objectives are given in the Learning Outcomes table
at the end of the chapter.
■
REVISED DATA All the data throughout the book have
been updated to reflect the most recent measurements
available. These updates include Figure 4.2: Carbon
Dioxide in the Atmosphere; Figure 4.3: Global Temperatures;
the unnumbered figure in Section 7.10 of U.S. Energy Consumption; Figure 7.12: Energy Consumption by Source; Table
7.6: Changes in National Average Pollutant Levels, 1990–
2016; Figure 15.19: Ozone Depletion in the Antarctic Spring;
Figure 17.15: Sources of U.S. Energy; Figure 17.16: Acid Rain;
and Figure 17.18: U.S. Sulfur Dioxide Pollutant Levels.
■
REVISED CHAPTER OPENERS Many chapteropening sections and (or) the corresponding art—
including Chapters 1, 3, 4, 5, 6, 7, 10, 11, 18, 19, 20, and
22—have been replaced or modified.
Acknowledgments
The book you hold in your hands bears my name on the cover,
but I am really only one member of a large team that carefully
crafted this book. Most importantly, I thank my editor, Terry
Haugen. Terry is a great editor and friend. He gives me the
right balance of freedom and direction and always supports
me in my endeavors. Thanks, Terry, for all you have done for
me and for general chemistry courses throughout the world.
Thanks also to Matt Walker, my new developmental editor on
this project. Matt is creative, organized, and extremely competent. He has made significant contributions to this revision
and has helped me with the many tasks that must be simultaneously addressed and developed during a revision as significant as this one. Matt, I hope this is only the beginning of
A01_TRO8902_05_GE_FM.indd 26
a long and fruitful collaboration. I also owe a special debt of
gratitude to Barbara Yien and Laura Southworth. Barbara was
involved in many parts of content development, and Laura
played a critical role in the revision of the art program. Many
thanks to the both of you!
Thanks also to my media editor, Paula Iborra. Paula has
been instrumental in helping me craft and develop the Key
Concept Videos, Interactive Worked Examples, and other
media content that accompany this text. Gracias, Paula.
I am also grateful to Harry Misthos, who helped with
organizing reviews, as well as numerous other tasks associated with keeping the team running smoothly. I am also
grateful to Jeanne Zalesky, Editor-in-Chief for Physical Sciences. She has supported me and my projects and allowed me
to succeed. Thanks also to Adam Jaworski, who oversees science courseware at Pearson. I am grateful to have his wise and
steady, yet innovative, hand at the wheel, especially during
the many changes that are happening within educational
publishing. I am also grateful to my marketing managers,
Chris Barker and Elizabeth Bell. Chris and I go way back and
have worked together in many different ways. Chris, thanks
for all you do to promote my books. Elizabeth is a marketing
manager extraordinaire. She has endless energy and ideas for
marketing this book. I have enjoyed working with her over
the last several years and wish to congratulate her on the
recent birth of her first child. Congratulations, Elizabeth!
I continue to owe a special word of thanks to Glenn and Meg
Turner of Burrston House, ideal collaborators whose contributions to the first edition of the book were extremely important and much appreciated. Quade Paul, who makes my ideas
come alive with his art, has been with us from the beginning,
and I owe a special debt of gratitude to him. I am also grateful
to Maria Guglielmo Walsh and Elise Lansdon for their creativity and hard work in crafting the design of this text. Finally, I
would like to thank Beth Sweeten and the rest of the Pearson
production team. They are a first-class operation—this text
has benefited immeasurably from their talents and hard
work. I also thank Francesca Monaco and her coworkers at
CodeMantra. I am a picky author and Francesca is endlessly
patient and a true professional. I am also greatly indebted to
my copy editor, Betty Pessagno, for her dedication and professionalism over many projects, and to Eric Schrader for his
exemplary photo research. And of course, I am continually
grateful for Paul Corey, with whom I have now worked for
over 18 years and 16 projects. Paul is a man of incredible
energy and vision, and it is my great privilege to work with
him. Paul told me many years ago (when he first signed me
on to the Pearson team) to dream big, and then he provided
the resources I needed to make those dreams come true.
Thanks, Paul. I would also like to thank my first editor at
Pearson, Kent Porter-Hamann. Kent and I spent many good
years together writing books, and I continue to miss her presence in my work.
I am also grateful to those who have supported me personally while working on this book. First on that list is my
wife, Ann. Her patience and love for me are beyond description, and without her, this book would never have been
26/08/2020 00:00
27
PREFACE
written. I am also indebted to my children, Michael, Ali, Kyle,
and Kaden, whose smiling faces and love of life always inspire
me. I come from a large Cuban family whose closeness and
support most people would envy. Thanks to my parents,
Nivaldo and Sara; my siblings, Sarita, Mary, and Jorge; my
siblings-in-law, Nachy, Karen, and John; and my nephews
and nieces, Germain, Danny, Lisette, Sara, and Kenny. These
are the people with whom I celebrate life.
I am especially grateful to Michael Tro, who put in many
hours proofreading my manuscript, working problems and
quiz questions, and organizing appendices. Michael, you are
amazing—it is my privilege to have you work with me on this
project.
I would like to thank all of the general chemistry students who have been in my classes throughout my 29 years as
a professor. You have taught me much about teaching that is
now in this book.
Lastly, I am indebted to the many reviewers, listed on the
following pages, whose ideas are embedded throughout this
book. They have corrected me, inspired me, and sharpened
my thinking on how best to teach this subject we call chemistry. I deeply appreciate their commitment to this project.
I am particularly grateful to Corey Beck who has played an
important role in developing the objectives for this edition.
I am also grateful to the accuracy of reviewers who tirelessly
checked page proofs for correctness.
Reviewers of the Fifth Edition
Vanessa Castleberry, Baylor University
Andrew Frazer, University of Central Florida
Alton Hassell, Baylor University
Barry Lavine, Oklahoma State University
Diana Leung, The University of Alabama
Lauren McMills, Ohio University
David Perdian, Broward College
Daniele Ramella, Temple University
Shuai Sun, University of Kansas
Dennis Taylor, Clemson University
Tara Todd, Vanderbilt University
Reviewers of Previous Editions
Patricia G. Amateis, Virginia Tech
Margaret R. Asirvatham, University of Colorado
Paul Badger, Robert Morris University
Monica H. Baloga, Florida Institute of Technology
Rebecca Barlag, Ohio University
Mufeed M. Basti, North Carolina Agricultural &
Technological State University
Amy E. Beilstein, Centre College
Donald Bellew, The University of New Mexico
Maria Benavides, University of Houston, Downtown
Kyle A. Beran, University of Texas of the Permian Basin
Thomas Bertolini, University of Southern California
Christine V. Bilicki, Pasadena City College
Silas C. Blackstock, The University of Alabama
Robert E. Blake, Texas Tech University
Angela E. Boerger, Loyola University Chicago
Robert S. Boikess, Rutgers University
Paul Brandt, North Central College
Michelle M. Brooks, College of Charleston
Gary Buckley, Cameron University
Joseph H. Bularzik, Purdue University, Calumet
Cindy M. Burkhardt, Radford University
Andrew E. Burns, Kent State University at Stark
A01_TRO8902_05_GE_FM.indd 27
Kim C. Calvo, The University of Akron
Stephen C. Carlson, Lansing Community College
David A. Carter, Angelo State University
Ferman Chavez, Oakland University
Eric G. Chesloff, Villanova University
Ted Clark, The Ohio State University
William M. Cleaver, The University of Vermont
Charles T. Cox Jr., Georgia Institute of Technology
J. Ricky Cox, Murray State University
Samuel R. Cron, Arkansas State University
Guy Crundwell, Central Connecticut State University
Darwin B. Dahl, Western Kentucky University
Robert F. Dias, Old Dominion University
Daniel S. Domin, Tennessee State University
Bonnie Dixon, University of Maryland
Alan D. Earhart, Southeast Community College
Jack Eichler, University of California, Riverside
Amina K. El-Ashmawy, Collin College
Joseph P. Ellison, United States Military Academy at West Point
Joseph M. Eridon, Central New Mexico Community College
Deborah B. Exton, The University of Oregon
William A. Faber, Grand Rapids Community College
Michael Ferguson, Honolulu Community College
Maria C. Fermin-Ennis, Gordon College
Oscar Navarro Fernandez, University of Hawaii at Manoa
Jan Florian, Loyola University Chicago
Andy Frazer, University of Central Florida
Candice E. Fulton, Midwestern State University
Ron Garber, California State University at Long Beach
Carlos D. Garcia, The University of Texas at San Antonio
Eric S. Goll, Brookdale Community College
Robert A. Gossage, Acadia University
Pierre Y. Goueth, Santa Monica College
Thomas J. Greenbowe, Iowa State University
Victoria Guarisco, Middle Georgia State University
Christin Gustafson, Illinois Central College
Jason A. Halfen, University of Wisconsin-Eau Claire
Nathan Hammer, University of Mississippi
Michael D. Hampton, University of Central Florida
Tamara Hanna, Texas Tech University
Lois Hansen-Polcar, Cuyahoga Community College-Western Campus
Tony Hascall, Northern Arizona University
Elda Hegmann, Kent State University
Monte L. Helm, Fort Lewis College
David E. Henderson, Trinity College
Susan K. Henderson, Quinnipiac University
Peter M. Hierl, The University of Kansas
Paula Hjorth-Gustin, San Diego Mesa College
Angela Hoffman, University of Portland
Todd A. Hopkins, Butler University
Byron E. Howell, Tyler Junior College
Ralph Isovitsch, Xavier University of Louisiana
Kenneth C. Janda, University of California, Irvine
Milt Johnston, University of South Florida
Jason A. Kautz, University of Nebraska-Lincoln
Catherine A. Keenan, Chaffey College
Steven W. Keller, University of Missouri
Resa Kelly, San Jose State University
Chulsung Kim, Georgia Gwinnett College
Louis J. Kirschenbaum, University of Rhode Island
Mark Knecht, University of Kentucky
Bette Kreuz, University of Michigan-Dearborn
Sergiy Kryatov, Tufts University
Richard H. Langley, Stephen F. Austin State University
Clifford B. Lemaster, Boise State University
Sarah Lievens, University of California, Davis
Robley Light, Florida State University
Adam List, Vanderbilt University
Christopher Lovallo, Mount Royal University
Eric Malina, University of Nebraska-Lincoln
Benjamin R. Martin, Texas State University
Lydia J. Martinez-Rivera, University of Texas at San Antonio
Marcus T. McEllistrem, University of Wisconsin-Eau Claire
Danny G. McGuire, Cameron University
Charles W. McLaughlin, University of Nebraska, Lincoln
Curt L. McLendon, Saddleback College
Lauren McMills, Ohio University
26/08/2020 00:00
28
PREFACE
Robert C. McWilliams, United States Military Academy
Behnoush Memari, Broward College
David H. Metcalf, University of Virginia
Ray Mohseni, East Tennessee State University
Elisabeth A. Morlino, University of the Sciences, Philadelphia
Nancy Mullins, Florida State College at Jacksonville
James E. Murphy, Santa Monica College
Maria C. Nagan, Truman State University
Edward J. Neth, University of Connecticut
Aric Opdahl, University of Wisconsin La Crosse
Kenneth S. Overway, Bates College
Greg Owens, University of Utah
Naresh Pandya, University of Hawaii
George Papadantonakis, The University of Illinois at Chicago
Gerard Parkin, Columbia University
Jessica Parr, University of Southern California
Yasmin Patell, Kansas State University
Tom Pentecost, Grand Valley State University
David Perdian, Broward College
Glenn A. Petrie, Central Missouri State
Norbert J. Pienta, University of Iowa
Louis H. Pignolet, University of Minnesota
Jerry Poteat, Georgia Perimeter College
Valerie Reeves, University of New Brunswick
Dawn J. Richardson, Colin College
Thomas G. Richmond, University of Utah
Dana L. Richter-Egger, University of Nebraska
Jason Ritchie, University of Mississippi
Christopher P. Roy, Duke University
A. Timothy Royappa, University of West Florida
Stephen P. Ruis, American River College
Raymond Sadeghi, The University of Texas at San Antonio
Alan E. Sadurski, Ohio Northern University
Thomas W. Schleich, University of California, Santa Cruz
Rod Schoonover, CA Polytechnic State University
Mark Schraf, West Virginia University
John Selegue, University of Kentucky
Tom Selegue, Pima Community College, West
Susan Shadle, Boise State University
Anju H. Sharma, Stevens Institute of Technology
Sherril A. Soman, Grand Valley State University
Michael S. Sommer, University of Wyoming
Jie S. Song, University of Michigan, Flint
Clarissa Sorensen, Central New Mexico Community College
Mary Kay Sorenson, University of Wisconsin, Milwaukee
Stacy E. Sparks, University of Texas, Austin
Richard Spinney, Ohio State University
William H. Steel, York College of Pennsylvania
Vinodhkumar Subramaniam, East Carolina University
Jerry Suits, University of Northern Colorado
Tamar Y. Susskind, Oakland Community College
Uma Swamy, Florida International University
Ryan Sweeder, Michigan State University
Dennis Taylor, Clemson University
Jacquelyn Thomas, Southwestern College
Kathleen Thrush Shaginaw, Villanova University
Lydia Tien, Monroe Community College
David Livingstone Toppen, California State University Northridge
Marcy Towns, Purdue University
Harold Trimm, Broome Community College
Frank Tsung, Boston College
Laura VanDorn, University of Arizona
Susan Varkey, Mount Royal College
Ramaiyer Venkatraman, Jackson State University
John B. Vincent, University of Alabama, Tuscaloosa
Kent S. Voelkner, Lake Superior College
Sheryl K. Wallace, South Plains College
Wayne E. Wesolowski, University of Arizona
Sarah E. West, Notre Dame University
John Wiginton, University of Mississippi
Kurt J. Winkelmann, Florida Institute of Technology
Troy D. Wood, University of Buffalo
Servet M. Yatin, Quincy College
Kazushige Yokoyama, SUNY Geneseo
Lin Zhu, IUPUI
A01_TRO8902_05_GE_FM.indd 28
Chapter 13, Solids and Modern
Materials, Advisory Board
Michael Burand, Oregon State University
Christopher Collison, Rochester Institute of Technology
Jordan Fantini, Denison University
Melissa Hines, Cornell University
Raymond Schaak, Penn State University
Jennifer Shanoski, Merritt College
Jim Zubricky, University of Toledo
Focus Group Participants
We would like to thank the following professors for contributing their valuable time to meet with the author and the publishing team in order to provide a meaningful perspective on
the most important challenges they face in teaching general
chemistry. They gave us insight into creating a general chemistry text that successfully responds to those challenges.
Focus Group 13
Kim Cortes, Kennesaw State University
Patrick Daubenmire, Loyola University - Chicago
Michael Dianovsky, South Dakota State University
Deborah Exton, University of Oregon
Joel Goldberg, University of Vermont
Edith Preciosa Kippenhan, University of Toledo
Thomas Mullen, University of North Florida
Tricia Shepherd, St. Edward’s University
Focus Groups 1–12
Corey Beck, Ohio University
Jennifer Duis, Northern Arizona University
Alton Hassell, Baylor University
Tina Huang, University of Illinois
Amy Irwin, Monroe Community College
Maria Korolev, University of Florida
Jennifer Schwartz Poehlmann, Stanford University
John Selegue, University of Kentucky
Sarah Siegel, Gonzaga University
Jeff Statler, University of Utah
Michael R. Abraham, University of Oklahoma
Ramesh D. Arasasingham, University of California, Irvine
James A. Armstrong, City College of San Francisco
Silas C. Blackstock, University of Alabama
Roberto A. Bogomolni, University of California, Santa Cruz
Stacey Brydges, University of California San Diego
Kenneth Capps, Central Florida Community College
Stephen C. Carlson, Lansing Community College
Charles E. Carraher, Florida Atlantic University
Kenneth Caswell, University of South Florida
Robert Craig Taylor, Oakland University
Darwin B. Dahl, Western Kentucky University
Mohammed Daoudi, University of Central Florida
Kate Deline, College of San Mateo
Stephanie Dillon, Florida State University
Ralph C. Dougherty, Florida State University
William Eck, University of Wisconsin, Marshfield/Wood County
Robert J. Eierman, University of Wisconsin, Eau Claire
Amina K. El-Ashmawy, Collin County Community College
William A. Faber, Grand Rapids Community College
Richard W. Frazee, Rowan University
Barbara A. Gage, Prince George’s Community College
Simon Garrett, California State University, Northridge
Raymond F. Glienna, Glendale Community College
Eric S. Goll, Brookdale Community College
Pierre Y. Goueth, Santa Monica College
26/08/2020 00:00
PREFACE
W. Tandy Grubbs, Stetson University
Jerome E. Haky, Florida Atlantic University
Jason A. Halfen, University of Wisconsin, Eau Claire
John A. W. Harkless, Howard University
Paul I. Higgs, Barry University
Norris W. Hoffman, University of South Alabama
Tony Holland, Wallace Community College
Todd A. Hopkins, Butler University
Moheb Ishak, St. Petersburg College, St. Petersburg
Kamal Ismail, CUNY, Bronx Community College
Greg M. Jorgensen, American River College
Sharon K. Kapica, County College of Morris
Jason Kautz, University of Nebraska, Lincoln
Mark Kearley, Florida State University
Catherine A. Keenan, Chaffey College
Steven W. Keller, University of Missouri, Columbia
Ellen Kime-Hunt, Riverside Community College, Riverside Campus
Peter J. Krieger, Palm Beach Community College, Lake Worth
Roy A. Lacey, State University of New York, Stony Brook
David P. Licata, Coastline Community College
Michael E. Lipschutz, Purdue University
Patrick M. Lloyd, CUNY, Kingsborough Community College
Boon H. Loo, Towson University
James L. Mack, Fort Valley State University
Jeanette C. Madea, Broward Community College, North
Joseph L. March, University of Alabama, Birmingham
Jack F. McKenna, St. Cloud State University
Curtis L. McLendon, Saddleback College
Dianne Meador, American River College
David Metcalf, University of Virginia
John A. Milligan, Los Angeles Valley College
Alice J. Monroe, St. Petersburg College, Clearwater
Elisabeth A. Morlino, University of the Sciences, Philadelphia
Heino Nitsche, University of California at Berkeley
Pedro Patino, University of Central Florida
Jeremy Perotti, Nova Southeastern University
Norbert J. Pienta, University of Iowa
Jayashree Ranga, Salem State University
Cathrine E. Reck, Indiana University
Thomas Ridgway, University of Cincinnati
Jil Robinson, Indiana University
Richard Rosso, St. John’s University
Steven Rowley, Middlesex County College
Benjamin E. Rusiloski, Delaware Valley College
Karen Sanchez, Florida Community College, Jacksonville
David M. Sarno, CUNY, Queensborough Community College
A01_TRO8902_05_GE_FM.indd 29
29
Reva A. Savkar, Northern Virginia Community College
Thomas W. Schleich, University of California, Santa Cruz
Donald L. Siegel, Rutgers University, New Brunswick
Mary L. Sohn, Florida Institute of Technology
Sherril Soman-Williams, Grand Valley State University
Allison Soult, University of Kentucky
Louise S. Sowers, Richard Stockton College of New Jersey
Anne Spuches, East Carolina University
William H. Steel, York College of Pennsylvania
Uma Swamy, Florida International University
Richard E. Sykora, University of South Alabama
Galina G. Talanova, Howard University
Claire A. Tessier, University of Akron
Kathleen Thrush Shaginaw, Villanova University
John Vincent, University of Alabama
Gary L. Wood, Valdosta State University
Servet M. Yatin, Quincy College
James Zubricky, University of Toledo
Acknowledgments for the Global
Edition
Pearson would like to acknowledge and thank the following
for their work on the Global Edition.
Contributors
Mathew Akerman, University of KwaZulu-Natal
James Brady, The University of Auckland
Mark Lynch, University of Southern Queensland
Katherine Stevens, The University of Adelaide
Bheki Xulu, University of KwaZulu-Natal
Reviewers
Burkhard Kirste, Freie Universität Berlin
Jakob “SciFox” Lauth, University of Applied Sciences, Aachen
Sadhna Mathura, University of the Witwatersrand
Nor Saadah Mohd Yusof, University of Malaya
Toon Peters, Zuyd Hogeschool
Susan Pyke, Flinders University
26/08/2020 00:00
Actively Engage Students to Become Expert
Problem Solvers and Critical Thinkers
Nivaldo Tro’s Chemistry: A Molecular Approach presents chemistry visually through
multi-level images—macroscopic, molecular, and symbolic representations—to help students see
the connections between the world they see around them, the atoms and molecules that compose
the world, and the formulas they write down on paper. The 5th Edition pairs digital, pedagogical
innovation with insights from learning design and educational research to create an active, integrated,
and easy-to-use framework. The new edition introduces a fully integrated book and media package
that streamlines course setup, actively engages students in becoming expert problem solvers, and makes
it possible for professors to teach the general chemistry course easily and effectively.
A01_TRO8902_05_GE_FM.indd 30
26/08/2020 00:00
Learn core concepts before
coming to class
Key Concept Videos
combine artwork from
the textbook with 2D and
3D animations to create
a dynamic on-screen
viewing and learning
experience. The 5th
edition includes 16 new
videos, for a total of 74.
These short videos include
narration and brief liveaction clips of author
Nivaldo Tro explaining
every key concept in
general chemistry. All
Key Concept Videos are
available and assignable
in Mastering Chemistry.
A01_TRO8902_05_GE_FM.indd 31
26/08/2020 00:00
Actively engage students...
With Learning
Catalytics, you’ll hear
from every student when
it matters most. You pose
a variety of questions
that help students recall
ideas, apply concepts, and
develop critical-thinking
skills. Your students
respond using their own
smartphones, tablets, or
laptops.
You can monitor responses with real-time analytics and find out what your students
do — and don’t — understand. Then, you can adjust your teaching accordingly, and even
facilitate peer-to-peer learning, helping students stay motivated and engaged. Learning
Catalytics includes prebuilt questions for every key topic in General Chemistry.
A01_TRO8902_05_GE_FM.indd 32
26/08/2020 00:00
with in-class activities
QUESTIONS FOR GROUP WORK
Discuss these questions with the group and record your consensus
answer.
139. Explain why 1-propanol (CH3CH2CH2OH) is miscible in both
water (H2O) and hexane (C6H6) when hexane and water are
barely soluble in each other.
140. Have each group member make a flashcard with one of the
following on the front: ∆Hsoln, ∆Hlattice, ∆Hsolvent, ∆Hmix, and
∆Hhydration. On the back of the card, each group member should
describe (in words) the ∆H process his or her card lists and how
that ∆H relates to other ∆H values mathematically. Each member presents his or her ∆H to the group. After everyone has presented, members should trade cards and quiz each other.
141. Complete the following table by adding increases, decreases, or
no effect:
Increasing
Temperature
Active Classroom Learning
142. When 13.62 g (about one tablespoon) of table sugar (sucrose,
C12H22O11) is dissolved in 241.5 mL of water (density 0.997 g/mL),
the final volume is 250.0 mL (about one cup). Have each group
member calculate one of the following for the solution and present his or her answer to the group:
a. mass percent
b. molarity
c. molality
143. Calculate the expected boiling and freezing point for the solution in the previous problem. If you had to bring this syrup to
the boiling point for a recipe, would you expect it to take much
more time than it takes to boil the same amount of pure water?
Why or why not? Would the syrup freeze in a typical freezer
(-18 °C)? Why or why not?
Increasing
Pressure
solubility of gas in water
solubility of a solid in water
p. 670
Questions for
Group Work allow
students to collaborate
and apply problemsolving skills on questions
covering multiple
concepts. The questions
can be used in or out
of the classroom, and
the goal is to foster
collaborative learning
and encourage students
to work together as a
team to solve problems.
All questions for group
work are pre-loaded into
Learning Catalytics for
ease of assignment.
Numerous ideas for
in-class activities can
be found in the Ready-toGo Teaching Modules in
the Instructor Resources
in Mastering Chemistry.
There, instructors will
find the most effective
activities, problems, and
questions from the text,
Mastering, and Learning
Catalytics, to use in class.
A01_TRO8902_05_GE_FM.indd 33
26/08/2020 00:00
Master problem-solving...
PROBLEMS BY TOPIC
Solution Concentration and Solution Stoichiometry
28. A chemist wants to make 7.5 L of a 0.330 M CaCl2 solution.
What mass of CaCl2 (in g) should the chemist use?
21. Calculate the molarity of each solution.
MISSED THIS? Read Section 5.2; Watch KCV 5.2, IWE 5.1
a. 3.25 mol of LiCl in 2.78 L solution
b. 28.33 g C6H12O6 in 1.28 L of solution
c. 32.4 mg NaCl in 122.4 mL of solution
29. How many mL of 1.25 M glucose are required to make 175.0 mL
of a 0.351 M glucose solution?
MISSED THIS? Read Section 5.2; Watch KCV 5.2, IWE 5.3
22. Calculate the molarity of each solution.
a. 0.11 mol of LiNO3 in 5.2 L of solution
b. 61.3 g C2H6O in 2.44 L of solution
c. 15.2 mg KI in 102 mL of solution
31. To what volume should you dilute 50.0 mL of a 12 M stock
HNO3 solution to obtain a 0.100 M HNO3 solution?
MISSED THIS? Read Section 5.2; Watch KCV 5.2, IWE 5.3
23. What is the molarity of NO3- in each solution?
MISSED THIS? Read Sections 5.2, 5.4; Watch KCV 5.2, IWE 5.1
a. 0.135 M KNO3
b. 0.135 M Ca(NO3)2
c. 0.135 M Al(NO3)3
24. What is the molarity of Cl - in each solution?
a. 0.300 M NaCl
b. 0.380 M SrCl2
c. 0.240 M AlCl3
25. How many moles of KCl are contained in each solution?
MISSED THIS? Read Section 5.2; Watch KCV 5.2, IWE 5.2
a. 0.556 L of a 2.3 M KCl solution
b. 1.8 L of a 0.85 M KCl solution
c. 114 mL of a 1.85 M KCl solution
26. What is the molarity of ethanol for each of the following
amounts of ethanol in 150.0 mL of solution?
a. 0.250 g
b. 1.38 g
c. 7.32 g
27. A laboratory procedure calls for making 400.0 mL of a 1.1 M
NaNO3 solution. What mass of NaNO3 (in g) is needed?
MISSED THIS? Read Section 5.2; Watch KCV 5.2, IWE 5.2
30. If 3.0 L of a 4.5 M SrCl2 solution is diluted to 40 L, what is the
molarity of the diluted solution?
32. To what volume should you dilute 25 mL of a 10.0 M H2SO4
solution to obtain a 0.150 M H2SO4 solution?
33. Consider the precipitation reaction.
MISSED THIS? Read Section 5.3; Watch IWE 5.4
2 Na3PO4(aq) + 3 CuCl2(aq) ¡ Cu3(PO4)2(s) + 6 NaCl(aq)
What volume of 0.155 M Na3PO4 solution is necessary to completely react with 90.5 mL of 0.103 M CuCl2?
34. Consider the precipitation reaction.
Li2S(aq) + Co(NO3)2(aq) ¡ 2 LiNO3(aq) + CoS(s)
What volume of 0.160 M Li2S solution is required to completely
react with 130 mL of 0.160 M Co(NO3)2?
35. What is the minimum amount of 6.0 M H2SO4 necessary to
produce 25.0 g of H2(g) according to the reaction between
aluminum and sulfuric acid?
MISSED THIS? Read Section 5.3; Watch IWE 5.4
NEW! MISSED
THIS? appears in
the end-of-chapter
Self-Assessment
Quizzes and each
odd-numbered
Problems by Topic
exercise. MISSED
THIS? provides
sections to read
and videos to watch
to help students
remediate where
necessary.
2 Al(s) + 3 H2SO4(aq) ¡ Al2(SO4)3(aq) + 3 H2(g)
36. What is the molarity of ZnCl2 that forms when 25.0 g of zinc
completely reacts with CuCl2 according to the following reaction? Assume a final volume of 275 mL.
Zn(s) + CuCl2(aq) ¡ ZnCl2(aq) + Cu(s)
p. 246
Interactive Worked Examples are digital versions of select worked examples from the text
that instruct students how to break down problems using Tro’s “Sort, Strategize, Solve, and Check”
technique. The Interactive Worked Examples pause in the middle and require the student to interact
by completing a step in the example. Each example has a follow-up question that is assignable in
Mastering Chemistry. There are 24 new Interactive Worked Examples for a total of 125.
A01_TRO8902_05_GE_FM.indd 34
26/08/2020 00:00
with tools students can use
after class
NEW! Ready-to-Go
Practice Modules
in the Mastering
Chemistry Study Area
help students master
the toughest topics
(as identified by
professors and fellow
students completing
homework and
practicing for
exams). Key Concept
Videos, Interactive
Worked Examples,
and problem sets
with answer-specific
feedback are all in
one easy to navigate
place to keep
students focused
and give them the
scaffolded support
they need to succeed.
Assignable SelfAssessment Quizzes,
complete with answer-specific
feedback, allow students to
quiz themselves so that they
can study on their own and test
their understanding in real time.
The Self-Assessment Quizzes
are assignable in Mastering
Chemistry. Professors can use
questions from these quizzes to
prepare a pretest on Mastering
Chemistry. Research has shown
that this kind of active exam
preparation improves students'
exam scores.
A01_TRO8902_05_GE_FM.indd 35
26/08/2020 00:00
Teach with art based on learning
design principles
Extensively updated
art program better
directs students’ attention
to key elements in
the art and promotes
understanding of the
processes depicted. Dozens
of figures in the Fifth
Edition were reviewed by
learning design specialists
to ensure they are clearly
navigable for students and
now include more helpful
annotations and labels to
help readers focus on key
concepts.
222
CHAPTER 5
Introduction to Solutions and Aqueous Reactions
Precipitation Reaction
2 KI(aq) + Pb(NO3)2(aq)
(soluble)
(soluble)
PbI2(s) + 2 KNO3(aq)
(insoluble)
(soluble)
◀ FIGURE 5.13 Precipitation of
Lead(II) Iodide
When a potassium iodide solution
is mixed with a lead(II) nitrate
solution, a yellow lead(II) iodide
precipitate forms.
K+
NO3-
K+
NO3
-
PbI2
Pb2+
I2 KI(aq)
(soluble)
+
Pb(NO3)2(aq)
(soluble)
PbI2(s) + 2 KNO3(aq)
(insoluble)
(soluble)
Precipitation reactions do not always occur when two aqueous solutions are mixed. For
example, if we combine solutions of KI(aq) and NaCl(aq), nothing happens (Figure 5.14▶):
KI(aq) + NaCl(aq) ¡ NO REACTION
The key to predicting precipitation reactions is to understand that only insoluble
compounds form precipitates. In a precipitation reaction, two solutions containing soluble
compounds combine and an insoluble compound precipitates. Consider the precipitation reaction described previously:
2 KI(aq) + Pb(NO3)2(aq) ¡ PbI2(s) + 2 KNO3(aq)
soluble
soluble
insoluble
soluble
KI and Pb(NO3)2 are both soluble, but the precipitate, PbI2, is insoluble. Before mixing,
KI(aq) and Pb(NO3)2(aq) are both dissociated in their respective solutions:
I-
NO3-
+
K
KI(aq)
M05_TRO8902_05_GE_C05.indd 222
A01_TRO8902_05_GE_FM.indd 36
Pb2+
Pb(NO3)2(aq)
02/07/2020 07:45
26/08/2020 00:00
5.5
223
Precipitation Reactions
The instant that the solutions come into contact, all four ions are present:
see the relationship
between the formulas
they write down on paper
(symbolic), the world
they see around them
(macroscopic), and the
atoms and molecules
that compose the world
(molecular).
2+
Pb
K+
NO3I-
KI(aq) and Pb(NO3)2(aq)
Now, new compounds—one or both of which might be insoluble—are possible. Specifically, the cation from either compound can pair with the anion from the other to form
possibly insoluble products:
Original compounds
Possible products
K
I
KNO3
Pb
(NO3)2
PbI2
If the possible products are both soluble, no reaction occurs and no precipitate forms. If
one or both of the possible products are insoluble, a precipitation reaction occurs. In
this case, KNO3 is soluble, but PbI2 is insoluble. Consequently, PbI2 precipitates.
To predict whether a precipitation reaction will occur when two solutions are mixed
and to write an equation for the reaction, we use the procedure that follows. The steps
are outlined in the left column, and two examples illustrating how to apply the procedure are shown in the center and right columns.
Tro’s multipart
images help students
K+
NO3PbI2
PbI2(s) and KNO3(aq)
No Reaction
KI(aq) + NaCl(aq)
No reaction
◀ FIGURE 5.14 No Precipitation
When a potassium iodide
solution is mixed with a
sodium chloride solution,
no reaction occurs.
ClK
Na+
I-
+
K+
Na+
Cl-
-
I
KI(aq)
+
NaCl(aq)
No reaction
pgs. 222–223
M05_TRO8902_05_GE_C05.indd 223
A01_TRO8902_05_GE_FM.indd 37
02/07/2020 07:45
26/08/2020 00:00
Deliver trusted content with
Pearson eText
Pearson eText is a simple-to-use, mobile-optimized, personalized reading experience available
within Mastering. It allows students to easily highlight, take notes, and review key vocabulary all
in one place—even when offline. Seamlessly integrated videos engage students and give them
access to the help they need, when they need it. Pearson eText is available within Mastering when
packaged with a new book; students can also purchase Mastering with Pearson eText online.
A01_TRO8902_05_GE_FM.indd 38
26/08/2020 00:00
Title
Instructor support you can rely on
Chemistry: A Molecular
Approach includes a full suite of
instructor support materials in the
Instructor Resources area in Mastering
Chemistry. Resources include new Readyto-Go Teaching Modules; accessible
PowerPoint lecture outlines; all images
and worked examples from the text;
all Key Concept Videos and Interactive
Worked Examples; plus an instructor
resource manual and test bank.
Ready-to-Go Study Tools provide organized material for every tough topic in General
Chemistry. The modules – created for and by instructors – provide easy-to-use before and after class
assignments, in-class activities with clicker questions, and questions in Learning Catalytics™. The
modules are easily accessed via Mastering Chemistry.
A01_TRO8902_05_GE_FM.indd 39
26/08/2020 00:00
This page is intentionally left blank
A01_TRO8902_05_GE_FM.indd 40
26/08/2020 00:00
Chemistry
A MOLECULAR APPROACH
A01_TRO8902_05_GE_FM.indd 41
26/08/2020 00:00
The most
incomprehensible thing
about the universe
is that it is
comprehensible.
C H A P T E R
—ALBERT EINSTEIN (1879–1955)
1
Matter, Measurement,
and Problem Solving
W
hat do you think is the most important idea in all of
human knowledge? This question has many possible
answers—some practical, some philosophical, and some
scientific. If we limit ourselves to scientific answers, mine would be
this: the properties of matter are determined by the properties
of atoms and molecules. Atoms and molecules determine how
matter behaves—if they were different, matter would be different.
The properties of water molecules determine how water behaves,
the properties of sugar molecules determine how sugar behaves,
and the properties of the molecules that compose our bodies
determine how our bodies behave. The understanding of matter
at the molecular level gives us unprecedented control over that
matter. For example, our understanding of the details of the molecules that compose living organisms has revolutionized biology
over the last 50 years.
42
M01_TRO8902_05_GE_C01.indd 42
31/07/2020 18:48
This image portrays the Disneyland ride, Adventure Thru Inner
Space. The premise of the ride is that you enter a microscope and
get shrunk down to the size of an atom. The red and white spheres
shown here depict oxygen and hydrogen atoms bound together to
form water molecules.
1.1
1.2
1.3
1.4
Atoms and Molecules 43
The Scientific Approach to Knowledge 45
The Classification of Matter 47
Physical and Chemical Changes and Physical
and Chemical Properties 51
1.5 Energy: A Fundamental Part of Physical
and Chemical Change 54
1.1
1.6
1.7
1.8
1.9
The Units of Measurement 55
The Reliability of a Measurement 62
Solving Chemical Problems 68
Analyzing and Interpreting Data 75
LEARNING OUTCOMES 80
Atoms and Molecules
As I sat in the “omnimover” and listened to the narrator’s voice telling
me that I was shrinking down to the size of an atom, I grew apprehensive but curious.
Just minutes before, while waiting in line, I witnessed what appeared to be full-sized
humans entering a microscope and emerging from the other end many times smaller.
I was seven years old, and I was about to ride Adventure Thru Inner Space, a Disneyland
WATCH NOW!
KEY CONCEPT VIDEO 1.1
Atoms and Molecules
43
M01_TRO8902_05_GE_C01.indd 43
31/07/2020 18:48
44
CHAPTER 1
Matter, Measurement, and Problem Solving
Water molecule
Oxygen
atom
Hydrogen
atoms
ride (in Tomorrowland) that simulated what it would be like to shrink to the size of an
atom. The ride began with darkness and shaking, but then the shaking stopped and giant
snowflakes appeared. The narrator explained that you were in the process of shrinking
to an ever-smaller size (which explains why the snowflakes grew larger and larger). Soon,
you entered the wall of the snowflake itself and began to see water molecules all around
you. These also grew larger as you continued your journey into inner space and eventually ended up within the atom itself. Although this Disneyland ride bordered on being
corny, and although it has since been shut down, it was my favorite ride as a young child.
That ride sparked my interest in the world of atoms and molecules, an interest that
has continued and grown to this day. I am a chemist because I am obsessed with the connection between the “stuff” around us and the atoms and molecules that compose that
stuff. More specifically, I love the idea that we humans have been able to figure out the
connection between the properties of the stuff around us and the properties of atoms and
molecules. Atoms are submicroscopic particles that are the fundamental building blocks
of ordinary matter. Free atoms are rare in nature; instead they bind together in specific
geometrical arrangements to form molecules. A good example of a molecule is the
water molecule, which I remember so well from the Disneyland ride.
A water molecule is composed of one oxygen atom bound to two hydrogen atoms in
the shape shown at left. The exact properties of the water molecule—the atoms that
compose it, the distances between those atoms, and the geometry of how the atoms are
bound together—determine the properties of water. If the molecule were different, water
would be different. For example, if water contained two oxygen atoms instead of just
one, it would be a molecule like this:
Hydrogen peroxide molecule
Oxygen
atoms
Hydrogen
atoms
The hydrogen peroxide we use as
an antiseptic or bleaching agent is
considerably diluted.
This molecule is hydrogen peroxide, which you may have encountered if you have
ever bleached your hair. A hydrogen peroxide molecule is composed of two oxygen
atoms and two hydrogen atoms. This seemingly small molecular difference results in a
huge difference in the properties of water and hydrogen peroxide. Water is the familiar
and stable liquid we all drink and bathe in. Hydrogen peroxide, in contrast, is an unstable liquid that, in its pure form, burns the skin on contact and is used in rocket fuel.
When you pour water onto your hair, your hair simply becomes wet. However, if you put
diluted hydrogen peroxide on your hair, a chemical reaction occurs that strips your hair
of its color.
The details of how specific atoms bond to form a molecule—in a straight line, at a
particular angle, in a ring, or in some other pattern—as well as the type of atoms in the
molecule, determine everything about the substance that the molecule composes. If we
want to understand the substances around us, we must understand the atoms and molecules that compose them—this is the central goal of chemistry. A good simple definition of chemistry is
Chemistry—the science that seeks to understand the behavior of
matter by studying the behavior of atoms and molecules.
The term atoms in this definition can
be interpreted loosely to include
atoms that have lost or gained
electrons.
M01_TRO8902_05_GE_C01.indd 44
Throughout this book, we explore the connection between atoms and molecules and
the matter they compose. We seek to understand how differences on the atomic or
molecular level affect the properties on the macroscopic level. Before we move on, let’s
examine one more example that demonstrates this principle. Consider the structures of
graphite and diamond.
31/07/2020 18:48
1.2 The Scientific Approach to Knowledge
Graphite is the slippery black substance (often
called pencil lead) that you have probably used in a
mechanical pencil. Diamond is the brilliant gemstone
found in jewelry. Graphite and diamond are both composed of exactly the same atoms—carbon atoms. The
striking differences between the substances are a result
of how those atoms are arranged. In graphite, the
atoms are arranged in sheets. The atoms within each
sheet are tightly bound to each other, but the sheets are
not tightly bound to other sheets. Therefore the sheets
can slide past each other, which is why the graphite in
a pencil leaves a trail as you write. In diamond, by contrast, the carbon atoms are all bound together in a
three-dimensional structure where layers are strongly
bound to other layers, resulting in the strong, nearly
unbreakable substance. This example illustrates how
even the same atoms can compose vastly different substances when they are bound together in different patterns. Such is the atomic and molecular world—small
differences in atoms and molecules can result in large
differences in the substances that they compose.
1.2
Graphite structure
The Scientific Approach to Knowledge
Throughout history, humans have approached knowledge about the physical world in different ways. For example, the Greek philosopher Plato (427–347 b.c.e.)
thought that the best way to learn about reality was—not through the senses—but
through reason. He believed that the physical world was an imperfect representation of
a perfect and transcendent world (a world beyond space and time). For him, true knowledge came, not through observing the real physical world, but through reasoning and
thinking about the ideal one.
The scientific approach to knowledge, however, is exactly the opposite of Plato’s.
Scientific knowledge is empirical—it is based on observation and experiment. Scientists
observe and perform experiments on the physical world to learn about it. Some observations and experiments are qualitative (noting or describing how a process happens), but
many are quantitative (measuring or quantifying something about the process). For
example, Antoine Lavoisier (1743–1794), a French chemist who studied combustion
(burning), made careful measurements of the mass of objects before and after burning
them in closed containers. He noticed that there was no change in the total mass of
material within the container during combustion. In doing so, Lavoisier made an
important observation about the physical world.
Observations often lead scientists to formulate a hypothesis, a tentative interpretation or explanation of the observations. For example, Lavoisier explained his observations on combustion by hypothesizing that when a substance burns, it combines with a
component of air. A good hypothesis is falsifiable, which means that it makes predictions that can be confirmed or refuted by further observations. Scientists test hypotheses
by experiments, highly controlled procedures designed to generate observations that
confirm or refute a hypothesis. The results of an experiment may support a hypothesis
or prove it wrong—in which case the scientist must modify or discard the hypothesis.
In some cases, a series of similar observations leads to the development of a scientific
law, a brief statement that summarizes past observations and predicts future ones.
Lavoisier summarized his observations on combustion with the law of conservation
of mass, which states, “In a chemical reaction, matter is neither created nor destroyed.”
This statement summarized his observations on chemical reactions and predicted the
outcome of future observations on reactions. Laws, like hypotheses, are also subject to
experiments, which can support them or prove them wrong.
M01_TRO8902_05_GE_C01.indd 45
45
Diamond structure
Although some Greek philosophers,
such as Aristotle, did use observation
to attain knowledge, they did
not emphasize experiment and
measurement to the extent that
modern science does.
▲ French chemist Antoine Lavoisier
with his wife, Marie, who helped
him in his work by illustrating his
experiments and translating scientific
articles from English. Lavoisier, who
also made significant contributions
to agriculture, industry, education,
and government administration,
was executed during the French
Revolution.
(The Metropolitan Museum of Art)
31/07/2020 18:48
46
CHAPTER 1
Matter, Measurement, and Problem Solving
In Dalton’s time, people thought
atoms were indestructible. Today,
because of nuclear reactions, we
know that atoms can be broken apart
into their smaller components.
▼ FIGURE 1.1 The Scientific
Approach to Knowledge
Scientific laws are not laws in the same sense as civil or governmental laws. Nature
does not follow laws in the way that we obey the laws against speeding or running a stop
sign. Rather, scientific laws describe how nature behaves—they are generalizations about
what nature does. For that reason, some people find it more appropriate to refer to them
as principles rather than laws.
One or more well-established hypotheses may form the basis for a scientific theory.
A scientific theory is a model for the way nature is and tries to explain not merely what
nature does but why. As such, well-established theories are the pinnacle of scientific
knowledge, often predicting behavior far beyond the observations or laws from which
they were developed. A good example of a theory is the atomic theory proposed by
English chemist John Dalton (1766–1844). Dalton explained the law of conservation of
mass, as well as other laws and observations of the time, by proposing that matter is
composed of small, indestructible particles called atoms. Since these particles are merely
rearranged in chemical changes (and not created or destroyed), the total amount of mass
remains the same. Dalton’s theory is a model for the physical world—it gives us insight
into how nature works and, therefore, explains our laws and observations.
Finally, the scientific approach returns to observation to test theories. For example,
scientists can test the atomic theory by trying to isolate single atoms or by trying to
image them (both of which, by the way, have already been accomplished). Theories are
validated by experiments; however, theories can never be conclusively proven because
some new observation or experiment always has the potential to reveal a flaw. Notice
that the scientific approach to knowledge begins with observation and ends with observation. An experiment is in essence a highly controlled procedure for generating critical
observations designed to test a theory or hypothesis. Each new set of observations has
the potential to refine the original model. Figure 1.1▼ summarizes one way to map the
scientific approach to knowledge. Scientific laws, hypotheses, and theories are all subject to continued experimentation. If a law, hypothesis, or theory is proved wrong by an
experiment, it must be revised and tested with new experiments. Over time, the scientific community eliminates or corrects poor theories and laws, and valid theories and
laws—those consistent with experimental results—remain.
Established theories with strong experimental support are the most powerful pieces
of scientific knowledge. You may have heard the phrase “That is just a theory,” as if theories are easily dismissible. Such a statement reveals a deep misunderstanding of the
nature of a scientific theory. Well-established theories are as close to truth as we get in
science. The idea that all matter is made of atoms is “just a theory,” but it has over
200 years of experimental evidence to support it. It is a powerful piece of scientific
knowledge on which many other scientific ideas are based.
One last word about the scientific approach to knowledge: some people wrongly
imagine science to be a strict set of rules and procedures that automatically leads to inarguable, objective facts. This is not the case. Even our diagram of the scientific approach
to knowledge is only an idealization of real science, useful to help us see the key distinctions of science. Real science requires hard work, care, creativity, and even a bit of luck.
The Scientific Approach
Confirm
Hypothesis
(or revise hypothesis)
Theory
Confirm
(or revise theory)
Test
Observations
Experiments
Experiments
Test
Test
Confirm
(or revise law)
M01_TRO8902_05_GE_C01.indd 46
Law
31/07/2020 18:48
47
1.3 The Classification of Matter
Scientific theories do not just arise out of data—men and women of genius and creativity craft theories. A great theory is not unlike a master painting, and many see a similar
kind of beauty in both. (For more on this aspect of science, see the accompanying box
entitled Thomas S. Kuhn and Scientific Revolutions.)
LAWS AND THEORIES Which statement best explains the difference
between a law and a theory?
(a) A law is truth; a theory is mere speculation.
(b) A law summarizes a series of related observations; a theory gives the underlying
reasons for them.
(c) A theory describes what nature does; a law describes why nature does it.
THE NATURE OF SCIENCE
W
Conceptual
Connection
the old one; it not only helps us to make sense of new or
anomalous information, but it also enables us to see accumulated
data from the past in a dramatically new way.
Kuhn further contended that theories are held for reasons
that are not always logical or unbiased, and that theories are not
true models—in the sense of a one-to-one mapping—of the
physical world. Because new theories are often so different from
the ones they replace, he argued, and because old theories
always make good sense to those holding them, they must not
be “True” with a capital T; otherwise “truth” would be constantly
changing.
Kuhn’s ideas created a controversy among scientists and
science historians that continues to this day. Some, especially
postmodern philosophers of science, have taken Kuhn’s ideas
one step further. They argue that scientific knowledge is
completely biased and lacks any objectivity. Most scientists,
including Kuhn, would disagree. Although Kuhn pointed out that
scientific knowledge has arbitrary elements, he also said,
“Observation . . . can and must drastically restrict the range of
admissible scientific belief, else there would be no science.” In
other words, saying that science contains arbitrary elements is
quite different from saying that science itself is arbitrary.
QUESTION In his book, Kuhn stated, “A new theory . . . is seldom
or never just an increment to what is already known.” From your
knowledge of the history of science, can you think of any examples
that support Kuhn’s statement? Do you know of any instances in
which a new theory or model was drastically different from the one it
replaced?
The Classification of Matter
Matter is anything that occupies space and has mass. Your desk, your
chair, and even your body are all composed of matter. Less obviously, the air around you
is also matter—it too occupies space and has mass. We call a specific instance of matter—
such as air, water, or sand—a substance. We classify matter according to its state (its
physical form) and its composition (the basic components that make it up).
M01_TRO8902_05_GE_C01.indd 47
Cc
ANSWER NOW!
| Thomas S. Kuhn and Scientific Revolutions
hen scientists talk about science, they often talk in ways
that imply that theories are “true.” Further, they talk as
if they arrive at theories in logical and unbiased ways.
For example, a theory central to chemistry that we have
discussed in this chapter is John Dalton’s atomic theory—the
idea that all matter is composed of atoms. Is this theory “true”?
Was it reached in logical, unbiased ways? Will this theory still be
around in 200 years?
The answers to these questions depend on how we view
science and its development. One way to view science—let’s call
it the traditional view—is as the continual accumulation of
knowledge and the building of increasingly precise theories. In
this view, a scientific theory is a model of the world that reflects
what is actually in nature. New observations and experiments
result in gradual adjustments to theories. Over time, theories get
better, giving us a more accurate picture of the physical world.
In the twentieth century, a different view of scientific knowledge
began to develop. A book by Thomas Kuhn (1922–1996),
published in 1962 and entitled The Structure of Scientific
Revolutions, challenged the traditional view. Kuhn’s ideas came
from his study of the history of science, which, he argued, does not
support the idea that science progresses in a smooth, cumulative
way. According to Kuhn, science goes through fairly quiet periods
that he called normal science. In these periods, scientists make
their data fit the reigning theory, or paradigm. Small inconsistencies
are swept aside during periods of normal science. However, when
too many inconsistencies and anomalies develop, a crisis emerges.
The crisis brings about a revolution and a new reigning theory.
According to Kuhn, the new theory is usually quite different from
1.3
1.1
WATCH NOW!
KEY CONCEPT VIDEO 1.3
Classifying Matter
31/07/2020 18:48
48
CHAPTER 1
Matter, Measurement, and Problem Solving
The state of matter changes
from solid to liquid to gas with
increasing temperature.
Glass and other amorphous solids
can be thought of, from one point
of view, as intermediate between
solids and liquids. Their atoms
are fixed in position at room
temperature, but they have no
long-range structure and do not
have distinct melting points.
Crystalline Solid:
Atoms are arranged in a regular
three-dimensional pattern
The States of Matter: Solid, Liquid, and Gas
Matter exists in three different states: solid, liquid, and gas. In solid matter, atoms
or molecules pack closely to each other in fixed locations. Although the atoms and
molecules in a solid vibrate, they do not move around or past each other. Consequently, a solid has a fixed volume and rigid shape. Ice, aluminum, and diamond
are examples of solids. Solid matter may be crystalline, in which case its atoms or
molecules are in patterns with long-range, repeating order (Figure 1.2▼), or it may be
amorphous, in which case its atoms or molecules do not have any long-range order.
Table salt and diamond are examples of crystalline solids; the well-ordered geometric
shapes of salt and diamond crystals reflect the well-ordered geometric arrangement
of their atoms (although this is not the case for all crystalline solids). Examples of
amorphous solids include glass and plastic. In liquid matter, atoms or molecules pack
about as closely as they do in solid matter, but they are free to move relative to each
other, giving liquids a fixed volume but not a fixed shape. Liquids assume the shape
of their containers. Water, alcohol, and gasoline are all substances that are liquids at
room temperature.
Diamond
C (s, diamond)
▲ FIGURE 1.2 Crystalline
Solid
Diamond (first discussed
in Section 1.1) is a crystalline
solid composed of carbon atoms
arranged in a regular, repeating
pattern.
Solid matter
Liquid matter
Gaseous matter
▲ In a solid, the atoms or molecules are fixed in place and can only vibrate. In a liquid, although the
atoms or molecules are closely packed, they can move past one another, allowing the liquid to flow
and assume the shape of its container. In a gas, the atoms or molecules are widely spaced, making
gases compressible as well as fluid (able to flow).
In gaseous matter, atoms or molecules have a lot of space between them and are free
to move relative to one another, making gases compressible (Figure 1.3▶). When you
squeeze a balloon or sit down on an air mattress, you force the atoms and molecules into
a smaller space so that they are closer together. Gases always assume the shape and volume of their containers. Substances that are gases at room temperature include helium,
nitrogen (the main component of air), and carbon dioxide.
M01_TRO8902_05_GE_C01.indd 48
31/07/2020 18:48
1.3 The Classification of Matter
A solid is not compressible.
49
A gas is compressible.
▲ FIGURE 1.3 The
Compressibility of Gases
Classifying Matter by Composition: Elements,
Compounds, and Mixtures
In addition to classifying matter according to its state, we classify it according to its composition, as shown in the following chart:
Gases
can be compressed—squeezed into a
smaller volume—because there is so
much empty space between atoms or
molecules in the gaseous state.
Matter
Variable composition?
No
Yes
Pure Substance
No
Element
Helium
M01_TRO8902_05_GE_C01.indd 49
Mixture
Separable into simpler
substances?
Yes
Compound
Pure water
No
Uniform throughout?
Heterogeneous
Wet sand
Yes
Homogeneous
Tea with sugar
31/07/2020 18:48
50
CHAPTER 1
Matter, Measurement, and Problem Solving
All known elements are listed in
the periodic table in the inside
front cover of this book.
ANSWER NOW!
1.2
Cc
The first division in the classification of matter is between a pure substance and a
mixture. A pure substance is made up of only one component, and its composition is
invariant (it does not vary from one sample to another). The components of a pure substance can be individual atoms or groups of atoms joined together. For example, helium,
water, and table salt (sodium chloride) are all pure substances. Each of these substances is
made up of only one component: helium is made up of helium atoms, water is made up of
water molecules, and sodium chloride is made up of sodium chloride units. The composition of a pure sample of any one of these substances is always exactly the same (because
you can’t vary the composition of a substance made up of only one component).
A mixture, by contrast, is composed of two or more components in proportions
that can vary from one sample to another. For example, sweetened tea, composed primarily of water molecules and sugar molecules (with a few other substances mixed in), is
a mixture. We can make tea slightly sweet (a small proportion of sugar to water) or very
sweet (a large proportion of sugar to water) or any level of sweetness in between.
We categorize pure substances themselves into two types—elements and
compounds—depending on whether or not they can be broken down (or decomposed)
into simpler substances. Helium, which we just noted is a pure substance, is also a good
example of an element, a substance that cannot be chemically broken down into simpler substances. Water, also a pure substance, is a good example of a compound, a
substance composed of two or more elements (in this case, hydrogen and oxygen) in a
fixed, definite proportion. On Earth, compounds are more common than pure elements
because most elements combine with other elements to form compounds.
We also categorize mixtures into two types—heterogeneous and homogeneous—
depending on how uniformly the substances within them mix. Wet sand is a heterogeneous
mixture, one in which the composition varies from one region of the mixture to another.
Sweetened tea is a homogeneous mixture, one with the same composition throughout.
Homogeneous mixtures have uniform compositions because the atoms or molecules that
compose them mix uniformly. Heterogeneous mixtures are made up of distinct regions
because the atoms or molecules that compose them separate. Here again we see that the
properties of matter are determined by the atoms or molecules that compose it.
Classifying a substance according to its composition is not always obvious and
requires that we either know the true composition of the substance or are able to test it
in a laboratory. For now, we focus on relatively common substances that you are likely to
have encountered. Throughout this course, you will gain the knowledge to understand
the composition of a larger variety of substances.
PURE SUBSTANCES AND MIXTURES In these images, a blue
circle represents an atom of one type of element, and a red square represents an atom of
a second type of element. Which image is a pure substance?
Conceptual
Connection
(a)
(b)
(c)
None of the these
(d)
Separating Mixtures
Chemists often want to separate a mixture into its components. Such separations can
be easy or difficult, depending on the components in the mixture. In general, mixtures are separable because the different components have different physical or chemical properties. We can use various techniques that exploit these differences to achieve
M01_TRO8902_05_GE_C01.indd 50
31/07/2020 18:48
1.4
51
Physical and Chemical Changes and Physical and Chemical Properties
Distillation
Filtration
When a mixture of
liquids with different
boiling points is heated...
... the most volatile
component boils first.
The vapor is then cooled and
collected as pure liquid.
When a mixture
of a liquid and a
solid is poured
through filter
paper...
Stirring rod
Funnel
... the filter paper
traps the solid.
Condenser
Cooling
water out
The liquid component
passes through
and is collected.
Cooling
water in
Mixture
▲ FIGURE 1.5 Separating
Substances by Filtration
Pure
liquid
▲FIGURE 1.4 Separating Substances by Distillation
separation. For example, we can separate a mixture
of sand and water by decanting—carefully pouring off—the water into another container. A
homogeneous mixture of liquids can usually be
separated by distillation, a process in which the
mixture is heated to boil off the more volatile (easily
vaporizable) liquid. The volatile liquid is then recondensed in a condenser and collected in a separate flask
(Figure 1.4▲). If a mixture is composed of an insoluble solid
and a liquid, we can separate the two by filtration, in which the
mixture is poured through filter paper in a funnel (Figure 1.5▲).
1.4
Water molecules change from liquid
to gaseous state: physical change.
H2O(l)
Physical and Chemical
Changes and Physical and
Chemical Properties
Every day we witness changes in matter: ice melts, iron rusts, gasoline burns, fruit ripens, and water evaporates. What happens to the molecules or atoms that compose these
substances during such changes? The answer depends on the type of change. Changes
that alter only state or appearance, but not composition, are physical changes. The
atoms or molecules that compose a substance do not change their identity during a physical change. For example, when water boils, it changes its state from a liquid to a gas, but
the gas remains composed of water molecules, so this is a physical change (Figure 1.6▲).
M01_TRO8902_05_GE_C01.indd 51
H2O(g)
▲ FIGURE 1.6 Boiling, a Physical
Change
When water boils, it
turns into a gas but does not alter
its chemical identity—the water
molecules are the same in both the
liquid and gaseous states. Boiling is a
physical change, and the boiling point
of water is a physical property.
31/07/2020 18:48
52
CHAPTER 1
Matter, Measurement, and Problem Solving
In contrast, changes that alter the composition of matter are chemical changes.
During a chemical change, atoms rearrange, transforming the original substances into
different substances. For example, the rusting of iron is a chemical change. The atoms
that compose iron (iron atoms) combine with oxygen molecules from air to form iron
oxide, the orange substance we call rust (Figure 1.7◀). Figure 1.8▶ illustrates other
examples of physical and chemical changes.
Physical and chemical changes are manifestations of physical and chemical properties.
A physical property is a property that a substance displays without changing its composition, whereas a chemical property is a property that a substance displays only by
changing its composition via a chemical change. The smell of gasoline is a physical property—gasoline does not change its composition when it exhibits its odor. The flammability
of gasoline, in contrast, is a chemical property—gasoline does change
Iron combines with oxygen to form iron oxide: chemical change.
its composition when it burns, turning into completely new sub4 Fe + 3 O2
2 Fe2O3
stances (primarily carbon dioxide and water). Physical properties
include odor, taste, color, appearance, melting point, boiling point,
Iron atoms
and density. Chemical properties include corrosiveness, flammability,
Iron oxide
acidity, toxicity, and other such characteristics.
(rust)
The differences between physical and chemical changes are not
always apparent. Only chemical examination can confirm whether
a particular change is physical or chemical. In many cases, however,
we can identify chemical and physical changes based on what we
know about the changes. Changes in the state of matter, such as
melting or boiling, or changes in the physical condition of matter,
such as those that result from cutting or crushing, are typically
physical changes. Changes involving chemical reactions—often
evidenced by temperature or color changes—are chemical changes.
▲ FIGURE 1.7 Rusting, a
Chemical Change When iron rusts,
A physical change results in
a different form of the same
substance, while a chemical
change results in a completely
different substance.
the iron atoms combine with oxygen
atoms to form a different chemical
substance, the compound iron oxide.
Rusting is a chemical change, and the
tendency of iron to rust is a chemical
property. A more detailed exploration
of this reaction can be found in
Section 20.9.
EXAMPLE 1.1
Physical and Chemical Changes and Properties
Determine whether each change is physical or chemical. What kind of property
(chemical or physical) is demonstrated in each case?
(a) the evaporation of rubbing alcohol
(b) the burning of lamp oil
(c) the bleaching of hair with hydrogen peroxide
(d) the formation of frost on a cold night
SOLUTION
(a) When rubbing alcohol evaporates, it changes from liquid to gas, but it
remains alcohol—this is a physical change. The volatility (the ability to
evaporate easily) of alcohol is therefore a physical property.
(b) Lamp oil burns because it reacts with oxygen in air to form carbon dioxide
and water—this is a chemical change. The flammability of lamp oil is
therefore a chemical property.
(c) Applying hydrogen peroxide to hair changes pigment molecules in hair that
give it color—this is a chemical change. The susceptibility of hair to
bleaching is therefore a chemical property.
(d) Frost forms on a cold night because water vapor in air changes its state to
form solid ice—this is a physical change. The temperature at which water
freezes is therefore a physical property.
Answers to For Practice and For
More Practice problems can be
found in Appendix IV.
FOR PRACTICE 1.1 Determine whether each change is physical or chemical. What
kind of property (chemical or physical) is demonstrated in each case?
(a) A copper wire is hammered flat.
(b) A nickel dissolves in acid to form a blue-green solution.
(c) Dry ice sublimes without melting.
(d) A match ignites when struck on a flint.
M01_TRO8902_05_GE_C01.indd 52
31/07/2020 18:48
1.4
Physical and Chemical Changes and Physical and Chemical Properties
53
Physical Change versus Chemical Change
Solid carbon dioxide
(dry ice)
(a) Dry ice subliming.
CO2(s)
CO2(g)
Gaseous carbon
dioxide
Chemical composition unaltered: Physical change
C12H22O11(s)
C12H22O11(aq)
Dissolved sugar
Solid sugar
(b) Sugar dissolving.
Chemical composition unaltered: Physical change
C3H8(g) + 5 O2(g)
3 CO2(g) + 4 H2O(g)
Carbon dioxide
and water
Propane
(c) Propane gas burning.
Chemical composition altered: Chemical change
▲ FIGURE 1.8 Physical and Chemical Changes (a) The sublimation (the state change from
a solid to a gas) of dry ice (solid CO2) is a physical change. (b) The dissolution of sugar is a physical
change. (c) The burning of propane is a chemical change.
M01_TRO8902_05_GE_C01.indd 53
31/07/2020 18:49
54
CHAPTER 1
ANSWER NOW!
Matter, Measurement, and Problem Solving
1.3
Cc
CHEMICAL AND PHYSICAL CHANGES The diagram on the left
represents liquid water molecules in a pan. Which of the three diagrams (a, b, or c) best
represents the water molecules after they have been vaporized by boiling?
Conceptual
Connection
(a)
1.5
10 kg
Weight on top of
building has high
potential energy
(unstable).
(b)
(c)
Energy: A Fundamental Part of
Physical and Chemical Change
The physical and chemical changes discussed in Section 1.4 are usually accompanied by energy changes. For example, when water evaporates from your skin (a physical
change), the water molecules absorb energy from your body, making you feel cooler. When
you burn natural gas on the stove (a chemical change), energy is released, heating the food
you are cooking. Understanding the physical and chemical changes of matter—that is,
understanding chemistry—requires that you understand energy changes and energy flow.
The scientific definition of energy is the capacity to do work. Work is defined as the
action of a force through a distance. For instance, when you push a box across the floor
or pedal your bicycle across the street, you have done work.
Potential energy
is converted to
kinetic energy.
Dropped weight
has low potential
energy (stable).
Thermal energy
▲ FIGURE 1.9 Energy
Conversions
Gravitational potential
energy is converted into kinetic
energy when the weight is dropped.
The kinetic energy is converted mostly
to thermal energy when the weight
strikes the ground.
In Chapter 21 we will discuss how
energy conservation is actually part
of a more general law that allows
for the interconvertibility of mass
and energy.
M01_TRO8902_05_GE_C01.indd 54
Force acts through distance; work is done.
The total energy of an object is a sum of its kinetic energy (the energy associated
with its motion) and its potential energy (the energy associated with its position or
composition). For example, a weight held several meters above the ground has potential
energy due to its position within Earth’s gravitational field (Figure 1.9◀). If you drop the
weight, it accelerates, and its potential energy is converted to kinetic energy. When the
weight hits the ground, its kinetic energy is converted primarily to thermal energy,
the energy associated with the temperature of an object. Thermal energy is actually a
type of kinetic energy because it is associated with the motion of the individual atoms or
molecules that make up an object. When the weight hits the ground, its kinetic energy is
essentially transferred to the atoms and molecules that compose the ground, raising the
temperature of the ground ever so slightly.
The first principle to note about how energy changes as the weight falls to the
ground is that energy is neither created nor destroyed. The potential energy of the weight
becomes kinetic energy as the weight accelerates toward the ground. The kinetic energy
then becomes thermal energy when the weight hits the ground. The total amount of
thermal energy that is released through the process is exactly equal to the initial potential energy of the weight. The idea that energy is neither created nor destroyed is known
as the law of conservation of energy. Although energy can change from one type
into another, and although it can flow from one object to another, the total quantity of
energy does not change—it remains constant.
31/07/2020 18:49
55
1.6 The Units of Measurement
The second principle to note about the raised
Molecules in
weight and its fall is the tendency of systems with high
gasoline (unstable)
potential energy to change in a way that lowers their
Molecules in
potential energy. For this reason, objects or systems
exhaust (stable)
with high potential energy tend to be unstable. The
weight lifted several meters from the ground is
unstable because it contains a significant amount of
potential energy. Unless restrained, the weight will
naturally fall, lowering its potential energy (due to
its position in Earth’s gravitational field). We can
Some of the released energy
harness some of the raised weight’s potential energy
is harnessed to do work...
... and the car moves forward.
to do work. For example, we can attach the weight
▲ FIGURE 1.10 Using Chemical
to a rope that turns a paddle wheel or spins a drill as the weight falls. After the weight falls to
Energy to Do Work The compounds
the ground, it contains less potential energy—it has become more stable.
produced when gasoline burns have
Some chemical substances are like a raised weight. For example, the molecules that
less chemical potential energy than the
compose gasoline have a relatively high potential energy—energy is concentrated in
gasoline molecules.
them just as energy is concentrated in the raised weight. The molecules in the gasoline
tend to undergo chemical changes (specifically combustion) that lower the molecules’
potential energy. As the energy of the molecules is released, some of it can be harnessed
to do work, such as moving a car forward (Figure 1.10▲). The molecules that result from
the chemical change have less potential energy than the original molecules in gasoline
and are more stable.
Chemical potential energy, such as the energy contained in the molecules that
compose gasoline, arises primarily from electrostatic forces between the electrically
charged particles (protons and electrons) that compose atoms and molecules. We will
learn more about those particles, as well as the properties of electrical charge, in
Chapter 2, but for now, know that molecules contain specific, usually complex, arrangements of these charged particles. Some of these arrangements—such as the one within
the molecules that compose gasoline—have a much higher potential energy than others. When gasoline undergoes combustion, the arrangement of these particles changes,
creating molecules with much lower potential energy and transferring a great deal of
energy (mostly in the form of heat) to the surroundings.
Summarizing Energy:
■
Energy is always conserved in a physical or chemical change; it is neither created nor
destroyed.
■
Systems with high potential energy tend to change in ways that lower their potential energy, transferring energy to the surroundings.
ENERGY What type of energy is chemical energy?
(a) kinetic energy
(b) thermal energy
(c) potential energy
1.6
The Units of Measurement
In 1999, NASA lost the $125 million Mars Climate Orbiter. The chairman
of the commission that investigated the disaster concluded, “The root cause of the
loss of the spacecraft was a failed translation of English units into metric units.” As a
result, the orbiter—which was supposed to monitor weather on Mars—descended too
far into the Martian atmosphere and burned up. In chemistry as in space exploration,
units—standard quantities used to specify measurements—are critical. If we get them
wrong, the consequences can be disastrous.
M01_TRO8902_05_GE_C01.indd 55
1.4
Cc
ANSWER NOW!
Conceptual
Connection
WATCH NOW!
KEY CONCEPT VIDEO 1.6
Units and Significant
Figures
31/07/2020 18:49
56
CHAPTER 1
Matter, Measurement, and Problem Solving
TABLE 1.1 ■ SI Base Units
▲ The $125 million Mars Climate
Orbiter was lost in 1999 because two
groups of engineers used different
units.
Quantity
Unit
Symbol
Length
Meter
m
Mass
Kilogram
kg
Time
Second
s
Temperature
Kelvin
K
Amount of substance
Mole
mol
Electric current
Ampere
A
Luminous intensity
Candela
cd
The two most common unit systems are the metric system, used in most of the
world, and the English system, used in the United States. Scientists use the
International System of Units (SI), which is based on the metric system.
Standard Units
The abbreviation SI comes from
the French, Système International
d’Unités.
Table 1.1 shows the standard SI base units. In this chapter, we focus on the first four of
these units: the meter, the standard unit of length; the kilogram, the standard unit of mass;
the second, the standard unit of time; and the kelvin, the standard unit of temperature.
The Meter: A Measure of Length
The meter (m) is slightly longer than a yard (1 yard is 36 inches, while 1 meter is
39.37 inches).
Yardstick
443 m
Meterstick
2m
Thus, a 100-yard (yd) football field measures only 91.4 m. The meter was originally
defined as 1/10,000,000 of the distance from the equator to the North Pole (through Paris).
The International Bureau of Weights and Measures now defines it more precisely as the
distance light travels through a vacuum in a certain period of time, 1/299,792,458 second.
A tall human is about 2 m tall, and the Empire State Building stands 443 m tall (including
its mast).
The Kilogram: A Measure of Mass
▲ The Empire State Building is 443 m
tall. A basketball player stands about
2 m tall.
The kilogram (kg), defined as the mass of a metal cylinder kept at the International
Bureau of Weights and Measures at Sèvres, France, is a measure of mass, a quantity different from weight. The mass of an object is a measure of the quantity of matter within it,
while the weight of an object is a measure of the gravitational pull on its matter. If you could
weigh yourself on the moon, for example, its weaker gravity would pull on you with less
force than does Earth’s gravity, resulting in a lower weight. A 130-pound (lb) person on
Earth would weigh only 21.5 lb on the moon. However, a person’s mass—the quantity of
matter in his or her body—remains the same on every planet. One kilogram of mass is the
equivalent of 2.205 lb of weight on Earth, so expressed in kilograms, a 130-lb person has a
mass of approximately 59 kg and this book has a mass of about 2.5 kg. A second common
unit of mass is the gram (g). One gram is 1/1000 kg. A nickel (5¢) has a mass of about 5 g.
The Second: A Measure of Time
▲ A nickel (5 cents) weighs about 5 g.
M01_TRO8902_05_GE_C01.indd 56
If you live in the United States, the second (s) is perhaps the SI unit most familiar to you.
The International Bureau of Weights and Measures originally defined the second in terms
of the day and the year, but a second is now defined more precisely as the duration of
9,192,631,770 periods of the radiation emitted from a certain transition in a cesium-133
atom. (We discuss transitions and the emission of radiation by atoms in Chapter 8.)
31/07/2020 18:49
57
1.6 The Units of Measurement
Scientists measure time on a large range of scales. The human heart beats about once
every second, the age of the universe is estimated to be about 4.32 * 1017 s (13.7 billion
years), and some molecular bonds break or form in time periods as short as 1 * 10 -15 s.
The Kelvin: A Measure of Temperature
The kelvin (K) is the SI unit of temperature. The temperature of a sample of matter
is a measure of the average kinetic energy—the energy due to motion—of the atoms or
molecules that compose the matter. The molecules in a hot glass of water are, on average,
moving faster than the molecules in a cold glass of water. Temperature is a measure of
this molecular motion.
Temperature also determines the direction of thermal energy transfer, what we
commonly call heat. Thermal energy transfers from hot objects to cold ones. For example, when you touch another person’s warm hand (and yours is cold), thermal energy
flows from his or her hand to yours, making your hand feel warmer. However, if you touch
an ice cube, thermal energy flows out of your hand to the ice, cooling your hand (and possibly melting some of the ice cube).
Figure 1.11▼ shows the three common temperature scales. The most common in the
United States is the Fahrenheit (°F) scale, shown on the left in Figure 1.11. On the
Fahrenheit scale, water freezes at 32 °F and boils at 212 °F at sea level. Room temperature is
approximately 72 °F. The Fahrenheit scale was originally determined by assigning 0 °F to the
freezing point of a concentrated saltwater solution and 96 °F to normal body temperature.
Scientists and citizens of most countries other than the United States typically use
the Celsius (°C) scale, shown in the middle in Figure 1.11. On this scale, pure water
freezes at 0 °C and boils at 100 °C (at sea level). Room temperature is approximately
22 °C. The Fahrenheit scale and the Celsius scale differ both in the size of their respective
degrees and the temperature each designates as “zero.” Both the Fahrenheit and Celsius
scales allow for negative temperatures.
The SI unit for temperature is the kelvin, shown in Figure 1.11. The Kelvin scale
(sometimes also called the absolute scale) avoids negative temperatures by assigning 0 K
to the coldest temperature possible, absolute zero. Absolute zero (-273.15 °C or -459 °F) is
the temperature at which molecular motion virtually stops. Lower temperatures do not
exist. The size of the kelvin is identical to that of the Celsius degree; the only difference is
Temperature Scales
100 °C
373 K
180
Fahrenheit
degrees
100
Celsius
degrees
100
kelvins
32 °F
0.00 °C
273 K
Water freezes
-459 °F
-273 °C
0K
Absolute zero
Fahrenheit
M01_TRO8902_05_GE_C01.indd 57
Water boils
212 °F
Celsius
Normal body temperature on the
modern Farhenheit scale is 98.6 °F.
Molecular motion does not
completely stop at absolute
zero because of the uncertainty
principle in quantum mechanics,
which we discuss in Chapter 8.
◀ FIGURE 1.11 Comparison
of the Fahrenheit, Celsius, and
Kelvin Temperature Scales The
Fahrenheit degree is five-ninths
the size of the Celsius degree and
the kelvin. The zero point of the Kelvin
scale is absolute zero (the lowest
possible temperature), whereas the
zero point of the Celsius scale is the
freezing point of water.
Kelvin
31/07/2020 18:49
58
CHAPTER 1
Matter, Measurement, and Problem Solving
The Celsius Temperature Scale
10 °C – Brisk fall day
0 °C – Water freezes
Note that we give Kelvin
temperatures in kelvins (not
“degrees Kelvin”) or K (not °K).
ANSWER NOW!
1.5
Cc
Conceptual
Connection
22 °C – Room temperature
45 °C – Summer day in Death Valley
the temperature that each scale designates as zero. We can convert between the temperature scales with these formulas:
(°F - 32)
°C =
1.8
K = °C + 273.15
TEMPERATURE SCALES Which temperature scale has no negative temperatures?
(a) Kelvin
(b) Celsius
(c) Fahrenheit
Throughout this book, we provide examples worked out in formats that are designed
to help you develop problem-solving skills. The most common format uses two columns
to guide you through the worked example. The left column describes the thought processes and steps used in solving the problem, while the right column shows the implementation. Example 1.2 follows this two-column format.
EXAMPLE 1.2
Converting between Temperature Scales
A sick child has a temperature of 40.00 °C. What is the child’s temperature in (a) K and (b) °F?
SOLUTION
(a) Begin by finding the equation that relates the quantity that is given (°C)
and the quantity you are trying to find (K).
K = °C + 273.15
Since this equation gives the temperature in K directly, substitute in the
correct value for the temperature in °C and calculate the answer.
K = °C + 273.15
(b) To convert from °C to °F, first find the equation that relates these two
quantities.
Since this equation expresses °C in terms of °F, solve the equation for °F.
K = 40.00 + 273.15 = 313.15 K
°C =
(°F - 32)
1.8
°C =
(°F - 32)
1.8
1.8(°C) = (°F - 32)
°F = 1.8(°C) + 32
Now substitute °C into the equation and calculate the answer.
°F = 1.8(°C) + 32
Note: The number of digits reported in this answer follows significant figure
conventions, covered in Section 1.7.
°F = 1.8(40.00 °C) + 32 = 104.00 °F
FOR PRACTICE 1.2 Gallium is a solid metal at room temperature, but it will melt to a liquid in your hand. The melting
point of gallium is 85.6 °F. What is this temperature on (a) the Celsius scale and (b) the Kelvin scale?
M01_TRO8902_05_GE_C01.indd 58
31/07/2020 18:49
1.6 The Units of Measurement
59
Prefix Multipliers
Scientific notation (see Appendix IA) allows us to express very large or very small quantities in a compact manner by using exponents. For example, the diameter of a hydrogen
atom is 1.06 * 10 -10 m. The International System of Units uses the prefix multipliers
listed in Table 1.2 with the standard units. These multipliers change the value of the unit
by powers of 10 (just like an exponent does in scientific notation). For example, the kilometer has the prefix kilo meaning 1000 or 103. Therefore,
1 kilometer = 1000 meters = 103 meters
Similarly, the millimeter has the prefix milli meaning 0.001 or 10 -3.
1 millimeter = 0 .001 meters = 10 -3 meters
TABLE 1.2 ■ SI Prefix Multipliers
Prefix
Symbol
Multiplier
exa
E
1,000,000,000,000,000,000
(1018)
peta
P
1,000,000,000,000,000
(1015)
tera
T
1,000,000,000,000
(1012)
giga
G
1,000,000,000
(109)
mega
M
1,000,000
(106)
kilo
k
1000
(103)
deci
d
0.1
(10 -1)
centi
c
0.01
(10 -2)
milli
m
0.001
(10 -3)
micro
m
0.000001
(10 -6)
nano
n
0.000000001
(10 -9)
pico
p
0.000000000001
(10 -12)
femto
f
0.000000000000001
(10 -15)
atto
a
0.000000000000000001
(10 -18)
When reporting a measurement, choose a prefix multiplier close to the size of the
quantity you are measuring. For example, to state the diameter of a hydrogen atom,
which is 1.06 * 10 -10 m, use picometers (106 pm) or nanometers (0.106 nm) rather than
micrometers or millimeters. Choose the prefix multiplier that is most convenient for a
particular number.
PREFIX MULTIPLIERS Which prefix multiplier is most appropriate for
reporting a measurement of 5.57 * 10 -5 m?
(a) mega
(b) milli
(c) micro
(d) kilo
1.6
Cc
ANSWER NOW!
Conceptual
Connection
Derived Units: Volume and Density
A derived unit is a combination of other units. For example, the SI unit for speed is
meters per second (m/s), a derived unit. Notice that this unit is formed from two other
SI units—meters and seconds—put together. You are probably more familiar with speed
measured in miles/hour or kilometers/hour—these are also examples of derived units.
Two other common derived units are those for volume (SI base unit is m3) and density (SI
base unit is kg/m3).
M01_TRO8902_05_GE_C01.indd 59
31/07/2020 18:49
60
CHAPTER 1
Matter, Measurement, and Problem Solving
Volume
Relationship between
Length and Volume
10 cm
1 cm
A 10-cm cube contains
1000 1-cm cubes.
▲ FIGURE 1.12 The Relationship
between Length and Volume A
cube with a 10-cm edge has a volume
of (10 cm)3 or 1000 cm3, and a cube
with a 100-cm edge has a volume of
(100 cm)3 = 1,000,000 cm3.
Volume is a measure of space. Any unit of length, when cubed (raised to the third
power), becomes a unit of volume. The cubic meter (m3), cubic centimeter (cm3), and
cubic millimeter (mm3) are all units of volume. The cubic nature of volume is not always
intuitive, and studies have shown that our brains are not naturally wired to process
abstract concepts such as volume. For example, consider this question: how many small
cubes measuring 1 cm on each side are required to construct a large cube measuring
10 cm on a side?
The answer to this question, as you can see by carefully examining the unit cube in
Figure 1.12◀, is 1000 small cubes. When we go from a linear, one-dimensional distance
to three-dimensional volume, we must raise both the linear dimension and its unit to
the third power (not multiply by 3). Thus, the volume of a cube is equal to the length of
its edge cubed.
volume of cube = (edge length)3
Other common units of volume in chemistry are the liter (L) and the milliliter
(mL). One milliliter (10 -3 L) is equal to 1 cm3. A gallon of gasoline contains 3.785 L.
Table 1.3 lists some common units—for volume and other quantities—and their
equivalents.
TABLE 1.3 ■ Some Common Units and Their Equivalents
Length
Mass
Volume
1 kilometer (km) = 0.6214 mile (mi)
1 kilogram (kg) = 2.205 pounds (lb)
1 liter (L) = 1000 mL = 1000 cm3
1 meter (m) = 39.37 inches (in) = 1.094 yards (yd)
1 pound (lb) = 453.59 grams (g)
1 liter (L) = 1.057 quarts (qt)
1 foot (ft) = 30.48 centimeters (cm)
1 ounce (oz) = 28.35 grams (g)
1 U.S. gallon (gal) = 3.785 liters (L)
1 inch (in) = 2.54 centimeters (cm) (exact)
Density
The m in the equation for density is
in italic type, meaning that it stands
for mass rather than for meters.
In general, the symbols for units
such as meters (m), seconds (s), or
kelvins (K) appear in regular type
while those for variables such as
mass (m), volume (V ), and time (t)
appear in italics.
M01_TRO8902_05_GE_C01.indd 60
An old riddle asks, “Which weighs more, a ton of bricks or a ton of feathers?” The
answer is neither—they both weigh the same (1 ton). If you answered bricks, you confused weight with density. The density (d) of a substance is the ratio of its mass (m) to
its volume (V ).
Density =
mass
volume
or
d =
m
V
Density is a characteristic physical property of substances (see Table 1.4) that
depends on temperature. Density is an example of an intensive property, one that
is independent of the amount of the substance. The density of aluminum, for example,
is the same whether you have a gram or a kilogram. Intensive properties are often
used to identify substances because these properties depend only on the type of substance, not on the amount of it. For example, from Table 1.4 you can see that pure
gold has a density of 19.3 g/cm3. One way to determine whether a substance is pure
gold is to determine its density and compare it to 19.3 g/cm3. Mass, in contrast, is an
extensive property, one that depends on the amount of the substance. If you know
only the mass of a sample of gold, that information alone will not allow you to identify it as gold.
The units of density are those of mass divided by volume. Although the SI-derived
unit for density is kg>m3, the density of liquids and solids is most often expressed in
g/cm3 or g/mL. (Remember that cm3 and mL are equivalent units: 1 cm3 = 1 mL.)
Aluminum is among the least dense metals with a density of 2.7 g/cm3, while platinum
is one of the densest metals with a density of 21.4 g/cm3.
31/07/2020 18:49
1.6 The Units of Measurement
Calculating Density
We can calculate the density of a substance by dividing the mass of a given amount of
the substance by its volume. For example, suppose a small nugget we suspect to be gold
has a mass of 22.5 g and a volume of 2.38 cm3. To find its density, we divide the mass by
the volume:
22.5 g
m
d =
=
= 9.45 g/cm3
V
2.38 cm3
In this case, the density reveals that the nugget is not pure gold because the density
3
of gold is 19.3 g/cm .
EXAMPLE 1.3
Calculating Density
A man receives a platinum ring from his fiancée. Before the wedding, he notices
that the ring feels a little light for its size, and so he decides to determine its density.
He places the ring on a balance and finds that it has a mass of 3.15 g. He then finds
that the ring displaces 0.233 cm3 of water. Is the ring made of platinum? (Note: The
volume of irregularly shaped objects is often measured by the displacement of
water. To use this method, the object is placed in water and the change in volume of
the water is measured. This increase in the total volume represents the volume of
water displaced by the object and is equal to the volume of the object.)
Set up the problem by writing the
important information that is given as
well as the information that you are
asked to find. In this case, we need to
find the density of the ring and compare
it to that of platinum.
GIVEN: m = 3.15 g
V = 0.233 cm3
FIND: Density in g>cm3
Note: In Section 1.8, we discuss this
standardized way of setting up problems.
61
TABLE 1.4 ■ The Density of
Some Common Substances
at 20 °C
Substance
Density
(g , cm3)
Charcoal
(from oak)
0.57
Ethanol
0.789
Ice
0.917
(at 0 °C)
Water
1.00
(at 4 °C)
Sugar (sucrose)
1.58
Table salt
(sodium chloride)
2.16
Glass
2.6
Aluminum
2.70
Titanium
4.51
Iron
7.86
Copper
8.96
Lead
11.4
Mercury
13.55
Gold
19.3
Platinum
21.4
m
V
Next, write down the equation that
defines density.
EQUATION d =
Solve the problem by substituting the
correct values of mass and volume into
the expression for density.
SOLUTION
3.15 g
m
d =
=
= 13.5 g>cm3
V
0.233 cm3
The density of the ring is much too low to be platinum (platinum density is
21.4 g>cm3), and the ring is therefore a fake.
FOR PRACTICE 1.3 The woman in Example 1.3 is shocked that the ring is fake
and returns it. She buys a new ring that has a mass of 4.53 g and a volume of
0.212 cm3. Is the new ring genuine?
FOR MORE PRACTICE 1.3 A metal cube has an edge that is 11.4 mm long and a
mass of 6.67 g. Calculate the density of the metal and use Table 1.4 to determine the
likely identity of the metal.
DENSITY The density of copper decreases as temperature increases (as does the
density of most substances). Which change occurs in a sample of copper when it is
warmed from room temperature to 95 °C?
(a) The sample becomes lighter.
(b) The sample becomes heavier.
(c) The sample expands.
(d) The sample contracts.
M01_TRO8902_05_GE_C01.indd 61
1.7
Cc
ANSWER NOW!
Conceptual
Connection
31/07/2020 18:49
62
CHAPTER 1
Matter, Measurement, and Problem Solving
CHEMISTRY AND MEDICINE | Bone Density
O
steoporosis—which means porous bone—is a condition in which bone density
becomes low. The healthy bones of a young adult have a density of about
1.0 g/cm3 . Patients suffering from osteoporosis, however, can have bone
densities as low as 0.22 g/cm3 . These low densities indicate that the bones have deteriorated and weakened, resulting in increased susceptibility to fractures, especially hip
fractures. Patients suffering from osteoporosis can also experience height loss and
disfiguration such as dowager’s hump, a condition in which the patient becomes
hunched over due to compression of the vertebrae. Osteoporosis is most common in
postmenopausal women, but it can also occur in people (including men) who have
certain diseases, such as insulin-dependent diabetes, or who take certain medications,
such as prednisone. Osteoporosis is usually diagnosed and monitored with hip X-rays.
Low-density bones absorb less of the X-rays than do high-density bones, producing
characteristic differences in the X-ray image. Treatments for osteoporosis include
calcium and vitamin D supplements, drugs that prevent bone weakening, exercise
and strength training, and, in extreme cases, hip-replacement surgery.
QUESTION Suppose you find a large animal bone in the woods, too large to fit in a beaker
or flask. How might you approximate its density?
◀ Top: Severe osteoporosis can necessitate surgery to
implant an artificial hip joint, seen in this X-ray image.
Bottom: Views of the bone matrix in a normal bone
(left) and one weakened by osteoporosis (right).
1.7
The Reliability of a Measurement
Carbon monoxide is a colorless gas emitted by motor vehicles and found in
polluted air. The table shown here lists carbon monoxide concentrations in Los Angeles
County as reported by the U.S. Environmental Protection Agency (EPA) over the period
1990–2017:
Year
Carbon Monoxide Concentration (ppm)*
1990
9.9
1995
9.0
2000
7.4
2005
2.8
2010
1.9
2017
1.1
*Second maximum, 8 hour average; ppm = parts per million (Pasadena Site 06-037-2005)
The first thing you should notice about these values is that they decrease over time.
For this decrease, we can thank the Clean Air Act and its amendments, which have
resulted in more efficient engines and specially blended fuels and consequently in cleaner
air in all major U.S. cities over the last 30 years. The second thing you might notice is the
number of digits to which the measurements are reported. The number of digits in a
reported measurement indicates the certainty associated with that measurement. A less
certain measurement of carbon monoxide levels might be reported as follows:
M01_TRO8902_05_GE_C01.indd 62
31/07/2020 18:49
1.7
Year
Carbon Monoxide Concentration (ppm)
1990
10
1995
9
2000
7
2005
3
2010
2
2017
1
Notice that the first set of data is reported to the nearest 0.1 ppm, while the second
set is reported to the nearest 1 ppm. Scientists report measured quantities in an agreedupon standard way. The number of reported digits reflects the certainty in the measurement: more digits, more certainty; fewer digits, less certainty. Numbers are usually written
so that the uncertainty is in the last reported digit. (We assume that uncertainty to be ;1
in the last digit unless otherwise indicated.) By reporting the 2010 carbon monoxide concentration as 1.9 ppm, the scientists mean 1.9 { 0.1 ppm. The carbon monoxide concentration is between 1.8 and 2.0 ppm—it might be 2.0 ppm, for example, but it could
not be 3.0 ppm. In contrast, if the reported value was 2 ppm (as in the second set of measurements), this would mean 2 { 1 ppm, or between 1 and 3 ppm. In general,
63
The Reliability of a Measurement
Estimation in Weighing
(a)
Markings every 1 g
Estimated reading 1.2 g
(b)
Markings every 0.1 g
Estimated reading 1.27 g
Scientific measurements are reported so that every digit is certain
except the last, which is estimated.
For example, consider the following reported number:
5.213
certain
estimated
The first three digits are certain; the last digit is estimated.
The number of digits reported in a measurement depends on the measuring device.
Consider weighing a pistachio nut on two different balances (Figure 1.13▶). The balance
on the top has marks every 1 g, while the balance on the bottom has marks every 0.1 g.
For the balance on the top, we mentally divide the space between the 1- and 2-g marks
into ten equal spaces and estimate that the pointer is at about 1.2 g. We then write the
measurement as 1.2 g, indicating that we are sure of the “1” but we have estimated the
“.2.” The balance on the bottom, with marks every tenth of a gram, requires that we write
the result with more digits. The pointer is between the 1.2-g mark and the 1.3-g mark.
We again divide the space between the two marks into ten equal spaces and estimate the
third digit. For the figure shown, we report 1.27 g.
EXAMPLE 1.4
▲ FIGURE 1.13 Estimation in
Weighing (a) This scale has markings
every 1 g, so we mentally divide
the space into ten equal spaces to
estimate the last digit. This reading
is 1.2 g. (b) Because this balance has
markings every 0.1 g, we estimate to the
hundredths place. This reading is 1.27 g.
Reporting the Correct Number of Digits
The graduated cylinder shown in the right margin has markings every 0.1 mL.
Report the volume (which is read at the bottom of the meniscus) to the correct
number of digits. (Note: The meniscus is the crescent-shaped surface at the top of
a column of liquid.)
SOLUTION
Since the bottom of the meniscus is between the 4.5 and 4.6 mL markings,
mentally divide the space between the markings into ten equal spaces and
estimate the next digit. In this case, you should report the result as 4.57 mL.
What if you estimated a little differently and wrote 4.56 mL? In general, a
one-unit difference in the last digit is acceptable because the last digit is estimated
and different people might estimate it slightly differently. However, if you wrote
4.63 mL, you would have misreported the measurement.
Meniscus
FOR PRACTICE 1.4 Record the temperature on the thermometer shown in the
right margin to the correct number of digits.
M01_TRO8902_05_GE_C01.indd 63
31/07/2020 18:49
64
CHAPTER 1
Matter, Measurement, and Problem Solving
Counting Significant Figures
The precision of a measurement—which depends on the instrument used to make the
measurement—must be preserved, not only when recording the measurement, but also
when performing calculations that use the measurement. We can accomplish the preservation of this precision by using significant figures. In any reported measurement, the
non–place-holding digits—those that are not simply marking the decimal place—are
called significant figures (or significant digits). The greater the number of significant figures, the greater the certainty of the measurement. For example, the number 23.5 has
three significant figures while the number 23.56 has four. To determine the number of
significant figures in a number containing zeroes, we distinguish between zeroes that are
significant and those that simply mark the decimal place. For example, in the number
0.0008, the leading zeroes (zeroes to the left of the first nonzero digit) mark the decimal
place but do not add to the certainty of the measurement and are therefore not significant; this number has only one significant figure. In contrast, the trailing zeroes (zeroes
at the end of a number) in the number 0.000800 do add to the certainty of the measurement and are therefore counted as significant; this number has three significant figures.
HOW TO: Determine the Number of Significant Figures in a Given Value
Significant Figure Rules
Examples
1. All nonzero digits are significant.
28.03
0.0540
2. Interior zeroes (zeroes between two nonzero digits) are significant.
408
7.0301
3. Leading zeroes (zeroes to the left of the first nonzero digit) are not significant.
They only serve to locate the decimal point.
0.00 32
0.0000 6
not significant
4. Trailing zeroes (zeroes at the end of a number) are categorized as follows:
• Trailing zeroes after a decimal point are always significant.
45.000
3.5600
• Trailing zeroes before a decimal point (and after a nonzero number) are
always significant.
140.00
2500.55
• Trailing zeroes before an implied decimal point are ambiguous and should
be avoided by using scientific notation.
1200
1.2 * 103
1.20 * 103
1.200 * 103
ambiguous
2 significant figures
3 significant figures
4 significant figures
• Some textbooks put a decimal point after one or more trailing zeroes if the
zeroes are to be considered significant. We avoid that practice in this book,
but you should be aware of it.
1200.
4 significant figures
(common in some
textbooks)
Exact Numbers
Exact numbers have no uncertainty and thus do not limit the number of significant
figures in any calculation. We can regard an exact number as having an unlimited number of significant figures. Exact numbers originate from three sources:
• From the accurate counting of discrete objects. For example, 3 atoms means
3.00000. . . atoms.
• From defined quantities, such as the number of centimeters in 1 m. Because 100 cm
is defined as 1 m,
100 cm = 1 m means 100 .00000... cm = 1.0000000... m
• From integral numbers that are part of an equation. For example, in the equation
diameter
, the number 2 is exact and therefore has an unlimited number of
radius =
2
significant figures.
M01_TRO8902_05_GE_C01.indd 64
31/07/2020 18:49
1.7
65
The Reliability of a Measurement
WATCH NOW!
INTERACTIVE WORKED EXAMPLE 1.5
EXAMPLE 1.5
Determining the Number of Significant Figures in a Number
How many significant figures are in each number?
(a) 0.04450 m
(b) 5.0003 km
(c) 10 dm = 1 m
(d) 1.000 * 105 s
(e) 0.00002 mm
(f) 10,000 m
SOLUTION
(a) 0.04450 m
Four significant figures. The two 4s and the 5 are significant (Rule 1). The trailing zero is after a decimal
point and is therefore significant (Rule 4). The leading zeroes only mark the decimal place and are
therefore not significant (Rule 3).
(b) 5.0003 km
Five significant figures. The 5 and 3 are significant (Rule 1), as are the three interior zeroes (Rule 2).
(c) 10 dm = 1 m Unlimited significant figures. Defined quantities have an unlimited number of significant figures.
(d) 1.000 * 105 s Four significant figures. The 1 is significant (Rule 1). The trailing zeroes are after a decimal point and
therefore significant (Rule 4).
(e) 0.00002 mm
One significant figure. The 2 is significant (Rule 1). The leading zeroes only mark the decimal place and
are therefore not significant (Rule 3).
(f) 10,000 m
Ambiguous. The 1 is significant (Rule 1), but the trailing zeroes occur before an implied decimal point and
are therefore ambiguous (Rule 4). Without more information, you would assume one significant figure. It is
better to write this as 1 * 105 to indicate one significant figure or as 1.0000 * 105 to indicate five (Rule 4).
FOR PRACTICE 1.5
How many significant figures are in each number?
(a) 554 km
(b) 7 pennies
(c) 1.01 * 105 m
(d) 0.00099 s
(e) 1.4500 km
(f) 21,000 m
Significant Figures in Calculations
WATCH NOW!
When we use measured quantities in calculations, the results of the calculation must
reflect the precision of the measured quantities. We should not lose or gain precision
during mathematical operations. Follow these rules when carrying significant figures
through calculations.
KEY CONCEPT VIDEO 1.7
Significant Figures in
Calculations
HOW TO: Determine Significant Figures in Calculated Quantities
Rules for Calculations
1. In multiplication or division, the
result carries the same number of
significant figures as the factor with
the fewest significant figures.
2. In addition or subtraction, the
result carries the same number of
decimal places as the quantity with
the fewest decimal places.
Examples
1.052
(4 sig. figures)
2.0035
(5 sig. figures)
*
12.504
*
3.20
=
(5 sig. figures)
÷
2.345
0.07
2.9975
5.4125 = 5.41
(3 sig. figures)
0.53
(2 sig. figures)
=
0.626094
6.7208
=
=
6.7
(2 sig. figures)
0.626
(3 sig. figures)
5.9
- 0.221
5.679 = 5.7
In addition and subtraction, it is helpful to draw a
line next to the number with the fewest decimal places.
This line determines the number of decimal places
in the answer.
—Continued on the next page
M01_TRO8902_05_GE_C01.indd 65
31/07/2020 18:49
66
CHAPTER 1
Matter, Measurement, and Problem Solving
Rules for Calculations
Examples
3. When rounding to the correct
number of significant figures,
round down if the last (or leftmost)
digit dropped is four or less; round
up if the last (or leftmost) digit
dropped is five or more.
Rounding to two significant figures:
5.37 rounds to 5.4
5.34 rounds to 5.3
5.35 rounds to 5.4
5.349 rounds to 5.3
A few books recommend a slightly
different rounding procedure for cases
in which the last digit is 5. However, the
procedure presented here is consistent
with electronic calculators and will be
used throughout this book.
Notice in the last example (5.349) that only the leftmost digit being dropped (in
this example, the 4) determines how you round the number. You ignore all the
digits to the right of the leftmost digit you are dropping (in this example, you
ignore the 9).
4. To avoid rounding errors in multistep calculations, round only the
final answer—do not round intermediate steps. If you write down
intermediate answers, keep track of
significant figures by underlining
the least significant digit.
6.78 : 5.903 : (5.489 - 5.01)
= 6.78 : 5.903 : 0.479
= 19.1707
= 19
underline least
significant digit
Notice that for multiplication or division, the quantity with the fewest significant figures determines the number of significant
figures in the answer, but for addition and subtraction, the quantity with the fewest decimal places determines the number of decimal
places in the answer. In multiplication and division, we focus on significant figures, but in addition and subtraction we focus on
decimal places. When a problem involves addition or subtraction, the answer may have a different number of significant figures
than the initial quantities. Keep this in mind in problems that involve both addition or subtraction and multiplication or division.
For example,
1.002 - 0.999
0.003
=
3.754
3.754
= 7.99 * 10 - 4
= 8 * 10 - 4
The answer has only one significant figure, even though the initial numbers had three or four.
WATCH NOW!
INTERACTIVE WORKED EXAMPLE 1.6
EXAMPLE 1.6
Significant Figures in Calculations
Perform each calculation to the correct number of significant figures.
(a) 1.10 * 0.5120 * 4.0015 , 3.4555
(b)
0.355
+105.1
-100.5820
(c) 4.562 * 3.99870 , (452.6755 - 452.33)
(d) (14.84 * 0.55) - 8.02
SOLUTION
(a) Round the intermediate result (in blue) to three significant figures to reflect the three significant figures in
the quantity with the fewest significant figures (1.10).
(b) Round the intermediate answer (in blue) to one
decimal place to reflect the quantity with the fewest
decimal places (105.1). Notice that 105.1 is not the
quantity with the fewest significant figures, but it has
the fewest decimal places and therefore determines
the number of decimal places in the answer.
M01_TRO8902_05_GE_C01.indd 66
1.10 * 0.5120 * 4.0015 , 3.4555
= 0.65219
= 0.652
0.355
+105.1
-100.5820
4.8730 = 4.9
31/07/2020 18:49
1.7
(c) Mark the intermediate result to two decimal places to
reflect the number of decimal places in the quantity
within the parentheses having the fewest number of
decimal places (452.33). Round the final answer to
two significant figures to reflect the two significant
figures in the least precisely known quantity (0.3455).
4.562 : 3.99870 , (452.6755 - 452.33)
(d) Mark the intermediate result to two significant figures
to reflect the number of significant figures in the
quantity within the parentheses having the fewest
number of significant figures (0.55). Round the final
answer to one decimal place to reflect the one decimal
place in the least precisely known quantity (8.162).
(14.84 * 0.55) - 8.02 = 8.162 - 8.02
= 0.142
= 0.1
FOR PRACTICE 1.6
67
The Reliability of a Measurement
= 4.562 : 3.99870 , 0.3455
= 52.79904
2 places of the decimal
= 53
Perform each calculation to the correct number of significant figures.
(a) 3.10007 * 9.441 * 0.0301 , 2.31
(b)
(c) 2.5110 * 21.20 , (44.11 + 1.223)
(d) (12.01 * 0.3) + 4.811
0.881
+132.1
- 12.02
Precision and Accuracy
Scientists often repeat measurements several times to increase confidence in the result. We
distinguish between two different kinds of certainty—accuracy and precision—associated
with such measurements. Accuracy refers to how close the measured value is to the actual
value. Precision refers to how close a series of measurements are to one another or how
reproducible they are. A series of measurements can be precise (close to one another in value
and reproducible) but not accurate (not close to the true value). Consider the results of three
students who repeatedly weighed a lead block known to have a true mass of 10.00 g (indicated by the solid horizontal blue line on the graphs in the accompanying figure).
Student A
Student B
Student C
Trial 1
10.49 g
9.78 g
10.03 g
Trial 2
9.79 g
9.82 g
9.99 g
Trial 3
9.92 g
9.75 g
10.03 g
Trial 4
10.31 g
9.80 g
9.98 g
Average
10.13 g
9.79 g
10.01 g
Student A:
Inaccurate
Imprecise
11
11
11
Average 10.13 g
Mass (g)
10.5
Student C:
Accurate
Precise
Student B:
Inaccurate
Precise
Average 9.79 g
10.49
10.31
10
9.79
9.92
True
mass
9.5
Average 10.01 g
10.5
10.5
10
10
9.78
9.82
9.75
9.80
1
2
3
Trial number
4
9
10.03 9.98
9.5
9.5
9
10.03 9.99
9
1
2
3
Trial number
4
1
2
3
Trial number
4
▲ Measurements are said to be precise if they are consistent with one another, but they are
accurate only if they are close to the actual value.
M01_TRO8902_05_GE_C01.indd 67
31/07/2020 18:49
68
CHAPTER 1
Matter, Measurement, and Problem Solving
• The results of student A are both inaccurate (not close to the true value) and imprecise (not consistent with one another). The inconsistency is the result of random
error, error that has equal probability of being too high or too low. Almost all
measurements have some degree of random error. Random error can, with enough
trials, average itself out.
• The results of student B are precise (close to one another in value) but inaccurate.
The inaccuracy is the result of systematic error, error that tends to be either too
high or too low. In contrast to random error, systematic error does not average out
with repeated trials. For instance, if a balance is not properly calibrated, it will systematically read too high or too low.
• The results of student C display little systematic error or random error—they are
both accurate and precise.
CHEMISTRY IN YOUR DAY | Integrity in Data Gathering
M
ost scientists spend many hours collecting data in the
laboratory. Often, the data do not turn out exactly as
the scientist had expected (or hoped). A scientist may
then be tempted to “fudge” the results. For example, suppose
you are expecting a particular set of measurements to follow a
certain pattern. After working hard over several days or weeks to
make the measurements, you notice that a few of them do not
quite fit the pattern that you anticipated. You might find yourself wishing that you could simply change or omit the “faulty”
measurements. Altering data in this way is considered highly
unethical in the scientific community and, when discovered, is
punished severely.
In 2004, Dr. Hwang Woo Suk, a stem cell researcher at the
Seoul National University in South Korea, published a research
paper in Science (a highly respected research journal) claiming
that he and his colleagues had cloned human embryonic stem
cells. As part of his evidence, he showed photographs of the
cells. The paper was hailed as an incredible breakthrough, and
Dr. Hwang traveled the world lecturing on his work. Time
WATCH NOW!
KEY CONCEPT VIDEO 1.8
Solving Chemical
Problems
1.8
magazine even included him on its “people that matter” list for
2004. Several months later, however, one of his coworkers
revealed that the photographs were fraudulent. According to the
coworker, the photographs came from a computer data bank of
stem cell photographs, not from a cloning experiment. A
university panel investigated the results and confirmed that the
photographs and other data had indeed been faked. Dr. Hwang
was forced to resign his prestigious post at the university.
Although not common, incidents like this do occur from time
to time. They are damaging to a community that is largely built on
trust. A scientist’s peers (other researchers in similar fields) review
all published research papers, but usually they are judging
whether the data support the conclusion—they assume that the
experimental measurements are authentic. The pressure to
succeed sometimes leads researchers to betray that trust.
However, over time, the tendency of scientists to reproduce and
build upon one another’s work results in the discovery of the
fraudulent data. When that happens, the researchers at fault are
usually banished from the community and their careers are ruined.
Solving Chemical Problems
Learning to solve problems is one of the most important skills you will acquire
in this course. No one succeeds in chemistry—or in life, really—without the ability to solve
problems. Although no simple formula applies to every chemistry problem, you can learn
problem-solving strategies and begin to develop some chemical intuition. Many of the problems you will solve in this course are unit conversion problems, where you are given one or
more quantities and asked to convert them into different units. Other problems require that
you use specific equations to get to the information you are trying to find. In the sections that
follow, you will find strategies to help you solve both of these types of problems. Of course,
many problems contain both conversions and equations, requiring the combination of
these strategies, and some problems may require an altogether different approach.
Converting from One Unit to Another
In Section 1.6, we discussed the SI unit system, the prefix multipliers, and a few other
units. Knowing how to work with and manipulate these units in calculations is central to
solving chemical problems. In calculations, units help to determine correctness. Using
units as a guide to solving problems is called dimensional analysis. Units should
always be included in calculations; they are multiplied, divided, and canceled like any
other algebraic quantity.
M01_TRO8902_05_GE_C01.indd 68
31/07/2020 18:49
1.8
Solving Chemical Problems
69
Consider converting 12.5 inches (in) to centimeters (cm). We know from Table 1.3
that 1 in = 2 .54 cm (exact), so we can use this quantity in the calculation.
12.5 in *
2.54 cm
= 31.8 cm
1 in
The unit, in, cancels, and we are left with cm as our final unit. The quantity 2.54 cm is a
1 in
conversion factor—a fractional quantity with the units we are converting from on the
bottom and the units we are converting to on the top. Conversion factors are constructed
from any two equivalent quantities. In this example, 2.54 cm = 1 in, so we construct the
conversion factor by dividing both sides of the equality by 1 in and canceling the units.
2.54 cm = 1 in
2.54 cm
1 in
=
1 in
1 in
2.54 cm
= 1
1 in
Because the quantity 2.54 cm is equivalent to 1, multiplying by the conversion factor
1 in
affects only the units, not the actual quantity. To convert the other way, from centimeters
to inches, we must—using units as a guide—use a different form of the conversion factor.
If we accidentally use the same form, we will get the wrong result, indicated by erroneous
units. For example, suppose that we want to convert 31.8 cm to inches.
31.8 cm *
2.54 cm
80.8 cm2
=
1 in
in
The units in the answer (cm2 >in), as well as the value of the answer, are obviously
wrong. When we solve a problem, we always look at the final units. Are they the desired
units? We must always look at the magnitude of the numerical answer as well. Does it
make sense? In this case, our mistake was the form of the conversion factor. It should
have been inverted so that the units cancel as follows:
31.8 cm *
1 in
= 12.5 in
2.54 cm
We can invert conversion factors because they are equal to 1 and the inverse of 1 is 1.
Therefore,
2.54 cm
1 in
= 1 =
1 in
2.54 cm
Most unit conversion problems take the following form:
Information given * conversion factor(s) = information sought
Given unit *
desired unit
= desired unit
given unit
In this book, we diagram problem solutions using a conceptual plan. A conceptual
plan is a visual outline that helps us to see the general flow of the problem solution. For
unit conversions, the conceptual plan focuses on units and the conversion from one
unit to another. The conceptual plan for converting in to cm is:
in
cm
2.54 cm
1 in
The conceptual plan for converting the other way, from cm to in, is just the reverse, with
the reciprocal conversion factor:
cm
in
1 in
2.54 cm
M01_TRO8902_05_GE_C01.indd 69
31/07/2020 18:49
70
CHAPTER 1
Matter, Measurement, and Problem Solving
Each arrow in a conceptual plan for a unit conversion has an associated conversion factor, with the units of the previous step in the denominator and the units of the following
step in the numerator. In the following section, we incorporate the idea of a conceptual
plan into an overall approach to solving numerical chemical problems.
General Problem-Solving Strategy
In this book, we introduce a standard problem-solving procedure that you can adapt to
many of the problems encountered in general chemistry and beyond. One of the difficulties beginning students encounter when trying to solve problems in general chemistry
is not knowing where to begin. To solve any problem, you must assess the information
given in the problem and devise a way to determine the requested information. In other
words, you must do the following:
• Identify the starting point (the given information).
• Identify the end point (what you must find).
• Devise a way to get from the starting point to the end point using what is given as
well as what you already know or can look up. (As we just discussed, this is the
conceptual plan.)
In graphic form, we can represent this progression as:
Given ¡ Conceptual Plan ¡ Find
Although no problem-solving procedure is applicable to all problems, the following
four-step procedure can be helpful in working through many of the numerical problems
you will encounter in this book.
1. Sort. Begin by sorting the information in the problem. Given information is the
basic data provided by the problem—often one or more numbers with their associated units. Find indicates what information you will need for your answer.
Most problems can be solved in
more than one way. The solutions
in this book tend to be the most
straightforward but certainly are
not the only way to solve the
problem.
2. Strategize. This is usually the most challenging part of solving a problem. In this
process, you must develop a conceptual plan—a series of steps that take you from the
given information to the information you are trying to find. You have already seen
conceptual plans for simple unit conversion problems. Each arrow in a conceptual
plan represents a computational step. On the left side of the arrow is the quantity
you had before the step, on the right side of the arrow is the quantity you have after
the step, and below the arrow is the information you need to get from one to the
other—the relationship between the quantities.
Often such relationships take the form of conversion factors or equations. These
may be given in the problem, in which case you will have written them down under
“Given” in step 1. Usually, however, you will need other information—which may
include physical constants, formulas, or conversion factors—to help get you from what
you are given to what you must find. This information comes from what you have
learned or can look up in the chapter or in tables within the book.
In some cases, you may get stuck at the strategize step. If you cannot figure out how
to get from the given information to the information you are asked to find, you might
try working backward. For example, you can look at the units of the quantity you are trying to find and attempt to find conversion factors to get to the units of the given quantity. You may even try a combination of strategies; work forward, backward, or some of
both. If you persist, you will develop a strategy to solve the problem.
3. Solve. This is the easiest part of solving a problem. Once you set up the problem
properly and devise a conceptual plan, you simply follow the plan to solve the
problem. Carry out any mathematical operations (paying attention to the rules for
significant figures in calculations) and cancel units as needed.
4. Check. This is the step beginning students most often overlook. Experienced problem solvers always ask, “Does this answer make sense? Are the units correct? Is the
number of significant figures correct?” When solving multistep problems, errors
can easily creep into the solution. You can catch most of these errors by simply
M01_TRO8902_05_GE_C01.indd 70
31/07/2020 18:49
1.8
71
Solving Chemical Problems
checking the answer. For example, suppose you are calculating the number of
atoms in a gold coin and end up with an answer of 1.1 * 10 -6 atoms. Could the
gold coin really be composed of one-millionth of one atom?
In Examples 1.7 and 1.8, this problem-solving procedure is applied to unit conversion problems. The procedure is summarized in the left column, and two examples of
applying the procedure are provided in the middle and right columns. This three-column
format is used in selected examples throughout this text. It allows you to see how to
apply a particular procedure to two different problems. Work through one problem first
(from top to bottom) and then see how you can apply the same procedure to the other
problem. Recognizing the commonalities and differences between problems is a key part
of developing problem-solving skills.
WATCH NOW!
INTERACTIVE WORKED
EXAMPLE VIDEO 1.8
HOW TO: Solve Unit
Conversion Problems
SORT Begin by sorting the information in the problem into given and
find.
STRATEGIZE Devise a conceptual
plan for the problem. Begin with the
given quantity and symbolize each
conversion step with an arrow. Below
each arrow, write the appropriate
conversion factor for that step. Focus
on the units. The conceptual plan
should end at the find quantity and
its units. In these examples, the other
information you need consists of relationships between the various units.
SOLVE Follow the conceptual plan.
Unit Conversion
Unit Conversion
EXAMPLE 1.7
EXAMPLE 1.8
Convert 1.76 yards to centimeters.
Convert 1.8 quarts to cubic centimeters.
GIVEN: 1.76 yd
FIND: cm
GIVEN: 1.8 qt
FIND: cm3
CONCEPTUAL PLAN
CONCEPTUAL PLAN
yd
m
cm
qt
L
cm3
mL
3
1m
1 cm
1L
1 mL
1 cm
1.094 yd
10-2 m
1.057 qt
10-3 L
1 mL
RELATIONSHIPS USED
RELATIONSHIPS USED
1.094 yd = 1 m
1 cm = 10 -2 m
(These conversion factors are from
Tables 1.2 and 1.3.)
1.057 qt = 1 L
1 mL = 10 -3 L
1 mL = 1 cm3
(These conversion factors are from Tables 1.2
and 1.3.)
SOLUTION
SOLUTION
1L
1 mL
1 cm3
*
*
-3
1.057 qt
1 mL
10 L
= 1.70293 * 103 cm3
Begin with the given quantity and its
units. Multiply by the appropriate
conversion factor(s), canceling units,
to arrive at the find quantity.
1m
1 cm
1.76 yd *
*
1.094 yd
10 -2 m
= 160.8775 cm
Round the answer to the correct
number of significant figures following the rules in Section 1.7.
Remember that exact conversion factors do not limit significant figures.
160.8775 cm = 161 cm
1.70293 * 103 cm3 = 1.7 * 103 cm3
CHECK Check your answer. Are the
The units (cm) are correct. The
magnitude of the answer (161)
makes sense because a centimeter
is a much smaller unit than a yard.
The units (cm3) are correct. The magnitude
of the answer (1700) makes sense because a
cubic centimeter is a much smaller unit
than a quart.
FOR PRACTICE 1.7
Convert 288 cm to yards.
FOR PRACTICE 1.8
Convert 9255 cm3 to gallons.
units correct? Does the answer make
sense?
M01_TRO8902_05_GE_C01.indd 71
1.8 qt *
31/07/2020 18:49
72
CHAPTER 1
Matter, Measurement, and Problem Solving
Units Raised to a Power
When building conversion factors for units raised to a power, remember to raise both the
number and the unit to the power. For example, to convert from in2 to cm2, we construct
the conversion factor as follows:
2.54 cm = 1 in
(2.54 cm)2 = (1 in)2
(2.54)2 cm2 = 12 in2
6.45 cm2 = 1 in2
6.45 cm2
= 1
1 in2
Example 1.9 demonstrates how to use conversion factors involving units raised to a power.
WATCH NOW!
INTERACTIVE WORKED EXAMPLE 1.9
EXAMPLE 1.9
Unit Conversions Involving Units Raised to a Power
Calculate the displacement (the total volume of the cylinders through which the pistons move)
of a 5.70-L automobile engine in cubic inches.
SORT Sort the information in the problem into given and
find.
STRATEGIZE Write a conceptual plan. Begin with the
given information and devise a path to the information
that you are asked to find. For cubic units, you must cube
the conversion factors.
GIVEN: 5.70 L
FIND: in3
CONCEPTUAL PLAN
L
cm 3
mL
in3
1 mL
1 cm3
(1 in)3
-3
1 mL
(2.54 cm)3
10
L
RELATIONSHIPS USED
1 mL = 10 - 3 L
1 mL = 1 cm3
2.54 cm = 1 in
(These conversion factors are from Tables 1.2 and 1.3.)
SOLVE Follow the conceptual plan to solve the problem.
Round the answer to three significant figures to reflect the
three significant figures in the least precisely known quantity (5.70 L). These conversion factors are all exact and
therefore do not limit the number of significant figures.
SOLUTION
(1 in)3
1 cm3
*
1 mL
10 L
(2.54 cm)3
3
3
= 347.835 in = 348 in
5.70 L *
1 mL
-3
*
CHECK The units of the answer are correct, and the magnitude makes sense. The unit cubic inches is smaller than liters,
so the volume in cubic inches should be larger than the volume in liters.
FOR PRACTICE 1.9
How many cubic centimeters are there in 2.11 yd3?
FOR MORE PRACTICE 1.9 A vineyard has 145 acres of Chardonnay grapes. A particular soil supplement requires 5.50 g for every
square meter of vineyard. How many kilograms of the soil supplement are required for the entire vineyard? (1 km2 = 247 acres)
WATCH NOW!
INTERACTIVE WORKED EXAMPLE 1.10
EXAMPLE 1.10
Density as a Conversion Factor
The mass of fuel in a jet must be calculated before each flight to ensure that the jet is not too heavy to fly. A 747
is fueled with 173,231 L of jet fuel. If the density of the fuel is 0.768 g>cm3, what is the mass of the fuel in kilograms?
SORT Begin by sorting the information in
the problem into given and find.
M01_TRO8902_05_GE_C01.indd 72
GIVEN: fuel volume = 173,231 L
density of fuel = 0.768 g>cm3
FIND: mass in kg
31/07/2020 18:49
1.8
STRATEGIZE Draw the conceptual plan by
beginning with the given quantity—in this
case the volume in liters (L). The overall goal
of this problem is to find the mass. You can
convert between volume and mass using density
(g>cm3). However, you must first convert the
volume to cm3. After you convert the volume
to cm3, use the density to convert to g. Finally,
convert g to kg.
SOLVE Follow the conceptual plan to solve
the problem. Round the answer to three significant figures to reflect the three significant
figures in the density.
73
Solving Chemical Problems
CONCEPTUAL PLAN
L
cm3
mL
3
g
kg
1 mL
1 cm
0.768 g
1 kg
10-3 L
1 mL
cm3
1000 g
RELATIONSHIPS USED
1 mL = 10 -3 L
1 mL = 1 cm3
d = 0.768 g>cm3
1000 g = 1 kg
(These conversion factors are from Tables 1.2 and 1.3.)
SOLUTION
173,231 L *
1 mL
-3
10 L
= 1.33 * 105 kg
*
0.768 g
1 kg
1 cm3
*
*
3
1 mL
1000 g
1 cm
CHECK The units of the answer (kg) are correct. The magnitude makes sense because the mass (1.33 * 105 kg) is similar
in magnitude to the given volume (173,231 L or 1.73231 * 105 L), as expected for a density close to 1 (0.768 g>cm3).
FOR PRACTICE 1.10 Backpackers often use canisters of white gas to fuel a cooking stove’s burner. If one canister contains
1.45 L of white gas and the density of the gas is 0.710 g>cm3, what is the mass of the fuel in kilograms?
FOR MORE PRACTICE 1.10
cubic centimeters?
A drop of gasoline has a mass of 22 mg and a density of 0.754 g>cm3. What is its volume in
Order-of-Magnitude Estimations
Calculation is an integral part of chemical problem solving. But precise numerical
calculation is not always necessary, or even possible. Sometimes data are only approximate; other times we may not need a high degree of precision—a rough estimate or a
simplified “back of the envelope” calculation is enough. We can also use approximate
calculations to get an initial feel for a problem or to make a quick check to see whether
our solution is “in the right ballpark.”
One way to make such estimates is to simplify the numbers so that they can be
manipulated easily. The technique known as order-of-magnitude estimation is based on
focusing only on the exponential part of numbers written in scientific notation, according to these guidelines:
• If the decimal part of the number is less than 5, just drop it. Thus, 4.36 * 105
becomes 105 and 2.7 * 10 -3 becomes 10 -3.
• If the decimal part is 5 or more, round it up to 10 and rewrite the number as a power
of 10. Thus, 5.982 * 107 becomes 10 * 107 = 108, and 6.1101 * 10 -3 becomes
10 * 10 -3 = 10 -2.
When we make these approximations, we are left with powers of 10, which are easier to multiply and divide. Of course, our answer is only as reliable as the numbers used
to get it, so we should not assume that the results of an order-of-magnitude calculation
are accurate to more than an order of magnitude.
Suppose, for example, that we want to estimate the number of atoms that an
immortal being could have counted in the 14 billion (1.4 * 1010) years that the universe
has been in existence, assuming a counting rate of ten atoms per second. Since a year has
3.2 * 107 seconds, we can approximate the number of atoms counted as follows:
seconds
atoms
*
101
≈ 1018 atoms
years
second
(number of atoms
(number of years) (number of seconds
per year)
counted per second)
1010 years
M01_TRO8902_05_GE_C01.indd 73
*
107
31/07/2020 18:49
74
CHAPTER 1
Matter, Measurement, and Problem Solving
A million trillion atoms (1018) may seem like a lot, but as we discuss in Chapter 2,
a speck of matter made up of a million trillion atoms is nearly impossible to see without
a microscope.
In our general problem-solving procedure, the last step is to check whether the
results seem reasonable. Order-of-magnitude estimations often help us catch the kinds
of mistakes that can happen in a detailed calculation, such as entering an incorrect
exponent or sign into a calculator or multiplying when we should have divided.
Problems Involving an Equation
We can solve problems involving equations in much the same way as problems involving conversions. Usually, in problems involving equations, we must find one of the
variables in the equation, given the others. The conceptual plan concept outlined earlier
can be used for problems involving equations. For example, suppose we are given the
mass (m) and volume (V ) of a sample and asked to calculate its density. The conceptual
plan shows how the equation takes us from the given quantities to the find quantity:
m, V
d
d=
m
V
Here, instead of a conversion factor under the arrow, this conceptual plan has an equation. The equation shows the relationship between the quantities on the left of the arrow
and the quantities on the right. Note that at this point the equation need not be solved
for the quantity on the right (although in this particular case it is). The procedure that
follows, as well as the two examples, offer guidance for developing a strategy to solve
problems involving equations. We again use the three-column format. Work through
one problem from top to bottom and then see how you can apply the same general procedure to the second problem.
WATCH NOW!
INTERACTIVE WORKED
EXAMPLE VIDEO 1.12
HOW TO: Solve
Problems Involving
Equations
SORT Begin by sorting the information in the problem into given
and find.
STRATEGIZE Write a conceptual
plan for the problem. Focus on the
equation(s). The conceptual plan
shows how the equation takes you
from the given quantity (or quantities) to the find quantity. The conceptual plan may have several parts,
involving other equations or
required conversions. In these
examples, you use the geometrical
relationships given in the problem
statements as well as the definition
of density, d = m>V, which you
learned in this chapter.
M01_TRO8902_05_GE_C01.indd 74
Problems with Equations
Problems with Equations
EXAMPLE 1.11
EXAMPLE 1.12
Find the radius (r) in centimeters of
a spherical water droplet with a
volume (V) of 0.058 cm3. For
a sphere, V = (4>3) pr 3.
3
Find the density (in g>cm ) of a metal
cylinder with a mass (m) of 8.3 g, a
length (l ) of 1.94 cm, and a radius (r) of
0.55 cm. For a cylinder, V = pr 2l.
GIVEN: V = 0.058 cm3
FIND: r in cm
GIVEN: m = 8.3 g
l = 1.94 cm
r = 0.55 cm
FIND: d in g>cm3
CONCEPTUAL PLAN
CONCEPTUAL PLAN
V
r
V=
4
3
l, r
,
V = pr l
pr 3
RELATIONSHIPS USED
4
V = pr 3
3
V
2
m, V
d
d = m/V
RELATIONSHIPS USED
V = pr 2l
m
d =
V
31/07/2020 18:49
1.9 Analyzing and Interpreting Data
75
SOLVE Follow the conceptual plan.
SOLUTION
SOLUTION
Solve the equation(s) for the find
quantity (if it is not already). Gather
each of the quantities that must go
into the equation in the correct
units. (Convert to the correct units if
necessary.) Substitute the numerical
values and their units into the
equation(s) and calculate the
answer.
4
V = pr 3
3
3
r3 =
V
4p
1>3
3
r = a Vb
4p
1>3
3
= a
0.058 cm3 b
4p
= 0.24013 cm
0.24013 cm = 0.24 cm
V = pr 2l
The units (cm) are correct and the magnitude makes sense.
The units (g>cm3) are correct. The magnitude of the answer seems correct for
one of the lighter metals (see Table 1.4).
FOR PRACTICE 1.11 Find the radius (r)
of an aluminum cylinder that is 2.00 cm
long and has a mass of 12.4 g. For a
cylinder, V = pr 2l.
FOR PRACTICE 1.12 Find the density,
in g>cm3, of a metal cube with a mass of
50.3 g and an edge length (l) of 2.65 cm.
For a cube, V = l 3.
Round the answer to the correct
number of significant figures.
CHECK Check your answer. Are the
units correct? Does the answer make
sense?
1.9
= p(0.55 cm)2 (1.94 cm)
= 1.8436 cm3
m
d =
V
8.3 g
=
= 4.50195 g>cm3
1.8436 cm3
4.50195 g>cm3 = 4.5 g>cm3
Analyzing and Interpreting Data
In Section 1.2, we saw that Lavoisier saw patterns in a series of related measurements. Sets of measurements constitute scientific data, and learning to analyze and interpret
data is an important scientific skill.
Identifying Patterns in Data
Suppose you are an early chemist trying to understand the composition of water. You know
that water is composed of the elements hydrogen and oxygen. You do several experiments in
which different samples of water are decomposed into hydrogen and oxygen and you get the
following results:
Sample
Mass of Water
Sample
Mass of Hydrogen
Formed
Mass of Oxygen
Formed
A
20.0 g
2.2 g
17.8 g
B
50.0 g
5.6 g
44.4 g
C
100.0 g
11.1 g
88.9 g
Do you notice any patterns in these data? Perhaps the easiest pattern to see is that the sum of
the masses of oxygen and hydrogen always sum to the mass of the water sample. For example, for the first water sample, 2.2 g hydrogen + 17.8 g oxygen = 20.0 g water. The pattern is
the same for the other samples. Another pattern, which is a bit more difficult to see, is that
the ratio of the masses of oxygen and hydrogen is the same for each sample.
Mass Oxygen
Sample
Mass of Hydrogen
Formed
Mass of Oxygen
Formed
Mass Hydrogen
A
2.2 g
17.8 g
8.1
B
5.6 g
44.4 g
7.9
C
11.1 g
88.9 g
8.01
The ratio is 8—the small variations are due to experimental error, which is common in
all measurements and observations.
M01_TRO8902_05_GE_C01.indd 75
31/07/2020 18:49
76
CHAPTER 1
Matter, Measurement, and Problem Solving
Carbon dioxide concentration
(parts per million)
Atmospheric Carbon Dioxide
Seeing patterns in data is a creative process that
requires you to not just merely tabulate laboratory measurements, but to see relationships that may not always be
obvious. The best scientists see patterns that others have
missed. As you learn to interpret data in this course, be
creative and try looking at data in new ways.
410
400
390
380
370
360
350
340
330
320
310
300
290
Interpreting Graphs
Data are often visualized using graphs or images and scientists must constantly analyze and interpret graphs. For
example, the graph in Figure 1.14◀ shows the concentration of carbon dioxide in Earth’s atmosphere as a function of
time. Carbon dioxide is a greenhouse gas that has been rising
as result of the burning of fossil fuels (such as gasoline and
1860 1880 1900 1920 1940 1960 1980 2000 2020
coal). When you look at a graph such as this one, you should
Year
first examine the x and y axes and make sure you understand
what
each
axis
represents.
You
should also examine the numerical range of the axes. In
▲ FIGURE 1.14 Atmospheric
Figure 1.14 the y axis does not begin at zero in order to better display the change that is occurCarbon Dioxide Levels from 1860
to Present.
ring. How would this graph look different if the y axis began at zero instead of at 290? Notice
also that, in this graph, the increase in carbon dioxide has not been constant over time. The
rate of increase—represented by the slope of the line—has intensified since about 1960.
EXAMPLE 1.13
Interpreting Graphs
Examine the graph in Figure 1.14 and answer each question.
(a) What was the concentration of carbon dioxide in 1960?
(b) What was the concentration in 2010?
(c) How much did the concentration increase between 1960 and 2010?
(d) What is the average rate of increase over this time?
(e) If the average rate of increase from part d remains constant, estimate the carbon dioxide concentration in 2050. (Use
the concentration in 2010 as your starting point.)
SOLUTION
Atmospheric Carbon Dioxide
Carbon dioxide concentration
(parts per million)
(a) To determine the concentration of
carbon dioxide in 1960, draw a vertical line at the year 1960. At the point
where the vertical line intersects the
carbon dioxide concentration curve,
draw a horizontal line. The point
where the horizontal line intercepts
the y axis represents the concentration in 1960. So, the concentration in
1960 was 317 ppm.
410
400
390
380
370
360
350
340
330
320
310
300
290
Vertical line
at 1960
317
ppm
Horizontal line
at intersection
1860 1880 1900 1920 1940 1960 1980 2000 2020
Year
M01_TRO8902_05_GE_C01.indd 76
31/07/2020 18:49
1.9 Analyzing and Interpreting Data
Atmospheric Carbon Dioxide
Carbon dioxide concentration
(parts per million)
(b) Apply the same procedure as in
part a, but now shift the vertical line
to the year 2010. The concentration
in the year 2010 was 389 ppm.
77
410
400
390
380
370
360
350
340
330
320
310
300
290
Vertical line
at 2010
389
ppm
Horizontal line
at intersection
1860 1880 1900 1920 1940 1960 1980 2000 2020
Year
(c) The increase in the carbon dioxide
concentration is the difference
between the two concentrations.
When calculating changes in quantities such as this, take the final quantity minus the initial quantity.
Increase in concentration = concentration in 2010 - concentration in 1960
(d) The average rate of increase over this
time is the change in the concentration divided by the number of years
that passed.
Determine the number of years that
have passed, which is equal to the
final year minus the initial year.
Number of years = final year - initial year
Determine the average rate of
increase by dividing the change
in concentration from part c by
the number of years that you just
calculated.
(e) Determine the increase in concentration between 2010 and 2050 by
multiplying the number of years
that pass in that time interval by the
average rate of change from part d.
Lastly, determine the concentration
in 2050 by adding the increase
between 2010 and 2050 to the
concentration in 2010.
= 389 ppm - 317 ppm
= 72 ppm
= 2010 - 1960
= 50 years
Average rate =
=
=
change in concentration
number of years
72 ppm
50 years
1.4 ppm
year
Increase = 40 years *
1.4 ppm
year
= 56 ppm
Concentration in 2050 = 389 ppm + 56 ppm
= 445 ppm
FOR PRACTICE 1.13 What was the average rate of increase in carbon dioxide concentration between 1880 and 1920?
Why might that rate be different than the rate between 1960 and 2010?
M01_TRO8902_05_GE_C01.indd 77
31/07/2020 18:49
78
CHAPTER 1
Matter, Measurement, and Problem Solving
QUIZ YOURSELF NOW!
Self-Assessment Quiz
Q1. A chemist mixes sodium with water and witnesses a violent
reaction between the metal and water. This is best classified as
MISSED THIS? Read Section 1.2
a) an observation.
c) a hypothesis.
b) a law.
d) a theory.
Q2. This image represents a particulate view of a sample of
matter. Classify the sample according to its composition.
MISSED THIS? Read Section 1.3; Watch KCV 1.3
Q10. Convert 1285 cm2 to m2.
MISSED THIS? Read Section 1.8; Watch IWE 1.9
a) 1.285 * 107 m2
c) 0.1285 m2
b) 12.85 m2
d) 1.285 * 105 m2
Q11. The first diagram depicts a compound in its liquid state.
Which of the other diagrams best depicts the compound
after it has evaporated into a gas?
MISSED THIS? Read Section 1.4
a) The sample is a pure element.
b) The sample is a homogeneous mixture.
c) The sample is a compound.
d) The sample is a heterogeneous mixture.
Q3. Which change is a physical change?
MISSED THIS? Read Section 1.4
a) wood burning
c) dynamite exploding
b) iron rusting
d) gasoline evaporating
Q4. Which property of rubbing alcohol is a chemical property?
MISSED THIS? Read Section 1.4
a) density (0.786 g/cm3)
c) boiling point (82.5 °C)
b) flammability
d) melting point (-89 °C)
(a)
(b)
(c)
(d)
Q5. Convert 85.0 °F to K.
MISSED THIS? Read Section 1.6; Watch KCV 1.3
a) 181.1 K
c) 29.4 K
b) 358 K
d) 302.6 K
Q6. Express the quantity 33.2 * 10 -4 m in mm.
MISSED THIS? Read Section 1.6; Watch KCV 1.3
a) 33.2 mm
c) 0.332 mm
b) 3.32 mm
d) 3.32 * 10 -6 mm
Q7. What is the mass of a 1.75 L sample of a liquid that has a
density of 0.921 g/mL?
MISSED THIS? Read Section 1.6
a) 1.61 * 103 g
c) 1.90 * 103 g
b) 1.61 * 10 -3 g
d) 1.90 * 10 -3 g
Q8. Perform the calculation to the correct number of significant
figures. MISSED THIS? Read Section 1.7; Watch KCV 1.6, 1.7,
IWE 1.5, 1.6
(43.998 * 0.00552)>2.002
a) 0.121
c) 0.12131
b) 0.12
d) 0.1213
Q9. Perform the calculation to the correct number of significant
figures. MISSED THIS? Read Section 1.7; Watch KCV 1.6, 1.7,
IWE 1.5, 1.6
(8.01 - 7.50)>3.002
a) 0.1698867
c) 0.170
M01_TRO8902_05_GE_C01.indd 78
b) 0.17
d) 0.1699
Q12. Three samples, each of a different substance, are weighed,
and their volume is measured. The results are tabulated. List
the substances in order of decreasing density.
MISSED THIS? Read Section 1.6
Mass
Volume
Substance I
10.0 g
10.0 mL
Substance II
10.0 kg
12.0 L
Substance III
12.0 mg
10.0 mL
a) III 7 II 7 I
b) I 7 II 7 III
c) III 7 I 7 II
d) II 7 I 7 III
31/07/2020 18:49
79
Chapter in Review
b) 1.3 * 10 mi/gal
d) 3.6 mi/gal
Q15. A wooden block has a volume of 18.5 in3. Express the
volume of the cube in cm3.
MISSED THIS? Read Section 1.8; Watch KCV 1.8, IWE 1.9
a) 303 cm3
c) 1.13 cm3
b) 47.0 cm3
d) 7.28 cm3
Q16. The graph that follows shows the area of a circle as a
function of its radius. What is the radius of a circle that has
an area of 155 square inches?
MISSED THIS? Read Section 1.9
Area (square inches)
a) 9.4 mi/gal
c) 52 mi/gal
2
200
150
100
50
0
0
2
4
6
8
Radius (inches)
a) 7.0 inches
c) 6.8 inches
7. (a) 8. (a)
Q14. The gas mileage of a certain German automobile is 22 km/L.
Convert this quantity to miles per gallon.
MISSED THIS? Read Section 1.8; Watch KCV 1.8
250
5. (d) 6. (b)
b) 0.103 g/cm3
d) 9.75 g/cm3
300
10
12
b) 6.5 inches
d) 6.2 inches
4. (b)
a) 34.4 g/cm3
c) 121 g/cm3
350
Answers: 1. (a) 2. (c) 3. (d)
Q13. A solid metal sphere has a radius of 3.53 cm and a mass
of 1.796 kg. What is the density of the metal in g>cm3?
(The volume of a sphere is V = 43 pr 3.)
MISSED THIS? Read Section 1.6; Watch IWE 1.12
9. (b) 10. (c)
11. (a) 12. (c) 13. (d)
14. (c) 15. (a) 16. (a)
CHAPTER 1 IN REVIEW
TERMS
Section 1.1
atoms (44)
molecules (44)
chemistry (44)
Section 1.2
hypothesis (45)
experiments (45)
scientific law (45)
law of conservation
of mass (45)
theory (46)
atomic theory (46)
Section 1.3
matter (47)
substance (47)
state (47)
composition (47)
solid (48)
liquid (48)
gas (48)
M01_TRO8902_05_GE_C01.indd 79
crystalline (48)
amorphous (48)
pure substance (50)
mixture (50)
element (50)
compound (50)
heterogeneous mixture (50)
homogeneous mixture (50)
decanting (51)
distillation (51)
volatile (51)
filtration (51)
Section 1.4
physical change (51)
chemical change (52)
physical property (52)
chemical property (52)
Section 1.5
energy (54)
work (54)
kinetic energy (54)
potential energy (54)
thermal energy (54)
law of conservation
of energy (54)
Section 1.6
units (55)
metric system (56)
English system (56)
International System
of Units (SI) (56)
meter (m) (56)
kilogram (kg) (56)
mass (56)
second (s) (56)
kelvin (K) (57)
temperature (57)
Fahrenheit (°F) scale (57)
Celsius (°C) scale (57)
Kelvin scale (57)
prefix multipliers (59)
derived unit (59)
volume (V) (60)
liter (L) (60)
milliliter (mL) (60)
density (d) (60)
intensive property (60)
extensive property (60)
Section 1.7
significant figures
(significant digits) (64)
exact numbers (64)
accuracy (67)
precision (67)
random error (68)
systematic
error (68)
Section 1.8
dimensional
analysis (68)
conversion factor (69)
31/07/2020 18:49
80
CHAPTER 1
Matter, Measurement, and Problem Solving
CONCEPTS
Atoms and Molecules (1.1)
■
■
All matter is composed of atoms and molecules.
Chemistry is the science that investigates the properties of matter
by examining the atoms and molecules that compose it.
The Scientific Approach to Knowledge (1.2)
■
■
■
Science begins with the observation of the physical world. A number of related observations can be summarized in a statement or
generalization called a scientific law.
A hypothesis is a tentative interpretation or an explanation of observations. One or more well-established hypotheses may prompt
the development of a scientific theory, a model for nature that explains the underlying reasons for observations and laws.
Laws, hypotheses, and theories all give rise to predictions that
can be tested by experiments, carefully controlled procedures
designed to produce critical new observations. If scientists cannot confirm the predictions, they must modify or replace the law,
hypothesis, or theory.
The Classification of Matter (1.3)
■
■
■
We classify matter according to its state (solid, liquid, or gas) or
according to its composition (pure substance or mixture).
A pure substance can either be an element, which cannot be
chemically broken down into simpler substances, or a compound,
which is composed of two or more elements in fixed proportions.
A mixture can be either homogeneous, with the same composition throughout, or heterogeneous, with different compositions
in different regions.
The Properties of Matter (1.4)
■
■
We classify the properties of matter into two types: physical and
chemical. Matter displays its physical properties without changing its composition.
Changes in matter in which composition does not change are
physical changes. Changes in matter in which composition does
change are chemical changes.
Energy (1.5)
■
■
In chemical and physical changes, matter often exchanges energy
with its surroundings. In these exchanges, the total energy is
always conserved; energy is neither created nor destroyed.
Systems with high potential energy tend to change in the
direction of lower potential energy, releasing energy into the surroundings.
The Units of Measurement and Significant
Figures (1.6, 1.7)
■
■
■
Scientists use SI units, which are based on the metric system. The
SI base units include the meter (m) for length, the kilogram (kg)
for mass, the second (s) for time, and the kelvin (K) for temperature.
Derived units are formed from a combination of other units.
Common derived units include those for volume (cm3 or m3) and
density (g/cm3).
The number of digits in a reported measurement reflects the
uncertainty in the measurement. Significant figures are the
non–place-holding digits in a reported number.
EQUATIONS AND RELATIONSHIPS
Relationship between Kelvin (K) and Celsius (°C) Temperature
Scales (1.6)
K = °C + 273.15
Relationship between Density (d ), Mass (m), and Volume (V ) (1.6)
d =
m
V
Relationship between Celsius (°C) and Fahrenheit (°F)
Temperature Scales (1.6)
(°F - 32)
°C =
1.8
LEARNING OUTCOMES
Chapter Objectives
Assessment
Apply the scientific approach (1.2)
Classify matter according to its composition (1.3)
Classify the properties and changes in matter as chemical or physical (1.4)
Compare the Fahrenheit, Celsius, and Kelvin temperature scales (1.6)
Express measurements using appropriate prefix multipliers (1.6)
Apply the density relationship to problems involving mass and volume (1.6)
Exercises 33–36
Exercises 37–42
Example 1.1
For Practice 1.1
Example 1.2
For Practice 1.2 Exercises 51–54
Exercises 43–50
Exercises 55–64
Example 1.3 For Practice 1.3 For More Practice 1.3
Exercises 65–72
Determine the number of significant figures in a measurement or reported
number (1.7)
Examples 1.4, 1.5 For Practice 1.4, 1.5 Exercises 73–82
Determine the number of significant figures in the result of a given
calculation (1.7)
Convert between units using dimensional analysis (1.8)
Example 1.6
Solve problems involving equations (1.8)
Examples 1.11, 1.12 For Practice 1.11, 1.12
M01_TRO8902_05_GE_C01.indd 80
For Practice 1.6 Exercises 83–90
Examples 1.7, 1.8, 1.9, 1.10 For Practice 1.7, 1.8, 1.9, 1.10
For More Practice 1.9, 1.10 Exercises 91–104
31/07/2020 18:49
81
Exercises
EXERCISES
Mastering Chemistry provides end-of-chapter exercises, feedback-enriched tutorial
problems, animations, and interactive activities to encourage problem-solving practice and
deeper understanding of key concepts and topics.
REVIEW QUESTIONS
1. Explain this statement in your own words and give an example.
The properties of the substances around us depend on the atoms and
molecules that compose them.
17. What is the difference between a physical change and a chemical change? List some examples of each.
2. Explain the main goal of chemistry.
19. What kind of energy is chemical energy? In what way is an elevated weight similar to a tank of gasoline?
3. Describe the scientific approach to knowledge. How does it differ from other approaches?
18. Explain the significance of the law of conservation of energy.
4. Explain the differences between a hypothesis, a law, and a theory.
20. What are the standard SI base units of length, mass, time, and
temperature?
5. What observations did Antoine Lavoisier make? What law did
he formulate?
21. What are the three common temperature scales? Does the size
of a degree differ among them?
6. What theory did John Dalton formulate?
22. What are prefix multipliers? List some examples.
7. What is wrong with the expression “That is just a theory,” if by
theory the speaker is referring to a scientific theory?
23. What is a derived unit? List an example.
8. What are two different ways to classify matter?
25. Explain the difference between intensive and extensive properties.
9. How do solids, liquids, and gases differ?
26. What is the meaning of the number of digits reported in a measured quantity?
10. What is the difference between a crystalline solid and an amorphous solid?
11. Explain the difference between a pure substance and a mixture.
12. Explain the difference between an element and a compound.
13. Explain the difference between a homogeneous and a heterogeneous mixture.
24. Explain the difference between density and mass.
27. When multiplying or dividing measured quantities, what determines the number of significant figures in the result?
28. When adding or subtracting measured quantities, what determines the number of significant figures in the result?
29. What are the rules for rounding off the results of calculations?
14. What kind of mixtures can be separated by filtration?
30. Explain the difference between precision and accuracy.
15. Explain how distillation is used to separate mixtures.
31. Explain the difference between random error and systematic
error.
16. What is the difference between a physical property and a chemical property?
32. What is dimensional analysis?
PROBLEMS BY TOPIC
Note: Answers to all odd-numbered Problems, numbered in blue, can be
found in Appendix III. Exercises in the Problems by Topic section are paired,
with each odd-numbered problem followed by a similar even-numbered
problem. Exercises in the Cumulative Problems section are also paired, but
more loosely. Challenge Problems and Conceptual Problems, because of
their nature, are unpaired.
The Scientific Approach to Knowledge
33. Classify each statement as an observation, a law, or a theory.
MISSED THIS? Read Section 1.2
a. All matter is made of tiny, indestructible particles called
atoms.
b. When iron rusts in a closed container, the mass of the container and its contents does not change.
c. In chemical reactions, matter is neither created nor
destroyed.
d. When a match burns, heat is released.
34. Classify each statement as an observation, a law, or a theory.
a. Chlorine is a highly reactive gas.
b. If elements are listed in order of increasing mass of their
atoms, their chemical reactivities follow a repeating
pattern.
c. Neon is an inert (or nonreactive) gas.
d. The reactivity of elements depends on the arrangement of
their electrons.
M01_TRO8902_05_GE_C01.indd 81
35. A chemist decomposes several samples of carbon monoxide
into carbon and oxygen and weighs the resultant elements.
The results are shown in the table. MISSED THIS? Read
Section 1.2
Sample
Mass of Carbon (g)
Mass of Oxygen (g)
1
6
8
2
12
16
3
18
24
a. Do you notice a pattern in these results?
Next, the chemist decomposes several samples of hydrogen peroxide into hydrogen and oxygen. The results are shown in the table.
Sample
Mass of Hydrogen (g)
Mass of Oxygen (g)
1
0.5
8
2
1
16
3
1.5
24
b. Do you notice a similarity between these results and those
for carbon monoxide in part a?
c. Can you formulate a law from your observations in a and b?
d. Can you formulate a hypothesis that might explain your
law in c?
31/07/2020 18:49
82
CHAPTER 1
Matter, Measurement, and Problem Solving
36. When astronomers observe distant galaxies, they can tell that
most of them are moving away from one another. In addition,
the more distant the galaxies, the more rapidly they are likely to
be moving away from each other. Can you devise a hypothesis to
explain these observations?
42. Determine whether each molecular diagram represents a pure
substance or a mixture. If it represents a pure substance, classify
the substance as an element or a compound. If it represents a
mixture, classify the mixture as homogeneous or heterogeneous.
The Classification and Properties of Matter
37. Classify each substance as a pure substance or a mixture. If it is a
pure substance, classify it as an element or a compound. If it is a
mixture, classify it as homogeneous or heterogeneous.
MISSED THIS? Read Section 1.3; Watch KCV 1.3
a. sweat
b. carbon dioxide
c. aluminum
d. vegetable soup
38. Classify each substance as a pure substance or a mixture. If it is a
pure substance, classify it as an element or a compound. If it is a
mixture, classify it as homogeneous or heterogeneous.
a. wine
b. beef stew
c. iron
d. carbon monoxide
(a)
(b)
(c)
(d)
39. Complete the table.
MISSED THIS? Read Section 1.3; Watch KCV 1.3
Substance
Pure or mixture
Type
aluminum
pure
element
apple juice
_______
_______
hydrogen peroxide
_______
_______
chicken soup
_______
_______
Substance
Pure or mixture
Type
water
pure
compound
coffee
_______
_______
ice
_______
_______
carbon
_______
_______
40. Complete the table.
41. Determine whether each molecular diagram represents a pure
substance or a mixture. If it represents a pure substance, classify
the substance as an element or a compound. If it represents a
mixture, classify the mixture as homogeneous or heterogeneous.
MISSED THIS? Read Section 1.3; Watch KCV 1.3
43. Classify each of the listed properties of isopropyl alcohol (also
known as rubbing alcohol) as physical or chemical.
MISSED THIS? Read Section 1.4
a. colorless
b. flammable
c. liquid at room temperature d. density = 0.79 g>mL
e. mixes with water
44. Classify each of the listed properties of ozone (a pollutant in the
lower atmosphere but part of a protective shield against UV light
in the upper atmosphere) as physical or chemical.
a. bluish color
b. pungent odor
c. very reactive
d. decomposes on exposure to ultraviolet light
e. gas at room temperature
45. Classify each property as physical or chemical.
MISSED THIS? Read Section 1.4
a. the tendency of ethyl alcohol to burn
b. the shine on silver
c. the odor of paint thinner
d. the flammability of propane gas
46. Classify each property as physical or chemical.
a. the boiling point of ethyl alcohol
b. the temperature at which dry ice evaporates
c. the tendency of iron to rust
d. the color of gold
(a)
(c)
M01_TRO8902_05_GE_C01.indd 82
(b)
(d)
47. Classify each change as physical or chemical.
MISSED THIS? Read Section 1.4
a. Natural gas burns in a stove.
b. The liquid propane in a gas grill evaporates because the valve
was left open.
c. The liquid propane in a gas grill burns in a flame.
d. A bicycle frame rusts on repeated exposure to air and water.
48. Classify each change as physical or chemical.
a. Sugar burns when heated in a skillet.
b. Sugar dissolves in water.
c. A platinum ring becomes dull because of continued abrasion.
d. A silver surface becomes tarnished after exposure to air for a
long period of time.
31/07/2020 18:50
83
Exercises
49. Based on the molecular diagram, classify each change as
physical or chemical. MISSED THIS? Read Section 1.4
c. -109 °F to °C (temperature of dry ice)
d. 98.6 °F to K (body temperature)
52. Convert each temperature.
a. 212 °F to °C (temperature of boiling water at sea level)
b. 22 °C to K (approximate room temperature)
c. 0.00 K to °F (coldest temperature possible, also known as
absolute zero)
d. 2.735 K to °C (average temperature of the universe as measured
from background black body radiation)
(a)
53. The coldest ground-level temperature ever measured on Earth is
-128.6 °F, recorded on July 21, 1983, in Antarctica. Convert that
temperature to °C and K.
MISSED THIS? Read Section 1.6; Watch KCV 1.6
54. The warmest temperature ever measured in the United States is
134 °F, recorded on July 10, 1913, in Death Valley, California.
Convert that temperature to °C and K.
55. Use the prefix multipliers to express each measurement without
exponents. MISSED THIS? Read Section 1.6; Watch KCV 1.6
a. 1.2 * 10 -9 m
b. 22 * 10 -15 s
c. 1.5 * 109 g
d. 3.5 * 106 L
(b)
(c)
50. Based on the molecular diagram, classify each change as physical or chemical.
56. Use prefix multipliers to express each measurement without
exponents.
a. 38.8 * 105 g
b. 55.2 * 10 -10 s
c. 23.4 * 1011 m
d. 87.9 * 10 -7 L
57. Use scientific notation to express each quantity with only the
base units (no prefix multipliers).
MISSED THIS? Read Section 1.6; Watch KCV 1.6
a. 38 fs
b. 13.2 ns
c. 153 pm
d. 122 mm
58. Use scientific notation to express each quantity with only base
units (no prefix multipliers).
a. 35 mL
b. 225 Mm
c. 133 Tg
d. 1.5 cg
59. Complete the table.
MISSED THIS? Read Sections 1.6, 1.8; Watch KCVs 1.6, 1.8
(a)
(b)
a. 1245 kg
1.245 * 106 g
1.245 * 109 mg
b. 515 km
_______dm
_______cm
c.
_______ms
_______ks
_______J
_______mJ
a. 355 km>s
_______cm>s
_______m>ms
b. 1228 g>L
_______g>mL
_______kg>mL
c.
554 mK>s
_______K>s
_______ mK>ms
d. 2.554 mg>mL
_______g>L
_______ mg>mL
122.355 s
d. 3.345 kJ
60. Complete the table.
(c)
Units in Measurement
51. Convert each temperature.
MISSED THIS? Read Section 1.6; Watch KCV 1.6
a. 32 °F to °C (temperature at which water freezes)
b. 77 K to °F (temperature of liquid nitrogen)
M01_TRO8902_05_GE_C01.indd 83
31/07/2020 18:50
84
CHAPTER 1
Matter, Measurement, and Problem Solving
61. Express the quantity 254,998 m in each unit.
MISSED THIS? Read Sections 1.6, 1.8; Watch KCVs 1.6, 1.8
a. km
b. Mm
c. mm
d. cm
62. Express the quantity 556.2 * 10 -12 s in each unit.
a. ms
b. ns
c. ps
d. fs
63. How many 1-cm squares would it take to construct a square that
is 1 m on each side? MISSED THIS? Read Section 1.6
64. How many 1-cm cubes would it take to construct a cube that is
4 cm on edge?
Density
65. A new penny has a mass of 2.49 g and a volume of 0.349 cm3.
Is the penny made of pure copper? Explain your answer.
MISSED THIS? Read Section 1.6; Watch KCV 1.6
66. A titanium bicycle frame displaces 0.314 L of water and has
a mass of 1.41 kg. What is the density of the titanium
in g>cm3 ?
67. Glycerol is a syrupy liquid often used in cosmetics and soaps.
A 3.25 L sample of pure glycerol has a mass of 4.10 * 103 g. What
is the density of glycerol in g>cm3?
MISSED THIS? Read Section 1.6; Watch KCV 1.6
68. A supposedly gold nugget displaces 19.3 mL of water and has a
mass of 371 g. Could the nugget be made of gold?
69. Ethylene glycol (antifreeze) has a density of 1.11 g/cm3.
MISSED THIS? Read Section 1.6; Watch KCV 1.6, IWE 1.10
a. What is the mass in g of 417 mL of ethylene glycol?
b. What is the volume in L of 4.1 kg of ethylene glycol?
70. Acetone (nail polish remover) has a density of 0.7857 g/cm3.
a. What is the mass in g of 28.56 mL of acetone?
b. What is the volume in mL of 6.54 g of acetone?
71. A small airplane takes on 245 L of fuel. If the density of the fuel is
0.821 g/mL, what mass of fuel has the airplane taken on?
MISSED THIS? Read Section 1.6; Watch KCV 1.6, IWE 1.10
72. Human fat has a density of 0.918 g>cm3. How much volume
(in cm3) is gained by a person who gains 10.0 lb of pure fat?
The Reliability of a Measurement and Significant
Figures
73. Read each measurement to the correct number of significant
figures. Laboratory glassware should always be read from the
bottom of the meniscus. MISSED THIS? Read Section 1.7
(a)
(b)
(c)
74. Read each measurement to the correct number of significant
figures. Laboratory glassware should always be read from the
bottom of the meniscus. Digital balances normally display mass
to the correct number of significant figures for that particular
balance.
M01_TRO8902_05_GE_C01.indd 84
(a)
(b)
(c)
75. For each measurement, underline the zeroes that are significant
and draw an x through the zeroes that are not.
MISSED THIS? Read Section 1.7; Watch KCV 1.6, IWE 1.5
a. 1,070,500 km
b. 0.0005 m
c. 0.000000000001002 s
d. 0.00208 cm
76. For each number, underline the zeroes that are significant and
draw an x through the zeroes that are not.
a. 180,701 mi
b. 0.001040 m
c. 0.005710 km
d. 90,201 m
77. How many significant figures are in each number?
MISSED THIS? Read Section 1.7; Watch KCV 1.6, IWE 1.5
a. 0.000312 m
b. 312,000 s
c. 3.12 * 105 km
d. 13,127 s
e. 2000
78. How many significant figures are in each number?
a. 0.1111 s
b. 0.007 m
c. 108,700 km
d. 1.563300 * 1011 m
e. 30,800
79. Which numbers are exact (and therefore have an unlimited number of significant figures)?
MISSED THIS? Read Section 1.7; Watch KCV 1.6, IWE 1.5
a. p = 3.14
b. 12 in = 1 ft
c. EPA gas mileage rating of 26 miles per gallon
d. 1 gross = 144
80. Indicate the number of significant figures in each number. If the
number is an exact number, indicate an unlimited number of
significant figures.
a. 325,365,189 (July 4, 2017 U.S. population)
b. 2.54 cm = 1 in
c. 11.4 g>cm3 (density of lead)
d. 12 = 1 dozen
81. Round each number to four significant figures.
MISSED THIS? Read Section 1.7; Watch KCV 1.7
a. 156.852
b. 156.842
c. 156.849
d. 156.899
82. Round each number to three significant figures.
a. 79,845.82
b. 1.548937 * 107
c. 2.3499999995
d. 0.000045389
31/07/2020 18:50
85
Exercises
Significant Figures in Calculations
83. Calculate to the correct number of significant figures. MISSED
THIS? Read Section 1.7; Watch KCVs 1.6, 1.7, IWEs 1.5, 1.6
a. 9.15 , 4.970
b. 1.54 * 0.03060 * 0.69
c. 27.5 * 1.82 , 100.04
d. (2.290 * 106) , (6.7 * 104)
84. Calculate to the correct number of significant figures.
a. 89.3 * 77.0 * 0.08
b. (5.01 * 105) , (7.8 * 102)
c. 4.005 * 74 * 0.007
d. 453 , 2.031
85. Calculate to the correct number of significant figures. MISSED
THIS? Read Section 1.7; Watch KCVs 1.6, 1.7, IWEs 1.5, 1.6
a. 43.7 - 2.341
b. 17.6 + 2.838 + 2.3 + 110.77
c. 19.6 + 58.33 - 4.974
d. 5.99 - 5.572
86. Calculate to the correct number of significant figures.
a. 0.004 + 0.09879
b. 1239.3 + 9.73 + 3.42
c. 2.4 - 1.777
d. 532 + 7.3 - 48.523
87. Calculate to the correct number of significant figures. MISSED
THIS? Read Section 1.7; Watch KCVs 1.6, 1.7, IWEs 1.5, 1.6
a. (24.6681 * 2.38) + 332.58
b. (85.3 - 21.489) , 0.0059
c. (512 , 986.7) + 5.44
d. 3(28.7 * 105) , 48.5334 + 144.99
88. Calculate to the correct number of significant figures.
a. 3(1.7 * 106) , (2.63 * 105)4 + 7.33
b. (568 .99 - 232 .1) , 5 .3
c. (9443 + 45 - 9.9) * 8.1 * 106
d. (3 .14 * 2 .4367) - 2 .34
89. A flask containing 11.6 mL of a liquid weighs 133.9 g with the
liquid in the flask and 124.1 g when empty. Calculate the density
of the liquid in g/mL to the correct number of significant digits.
(The density is the mass of the liquid divided by its volume.)
MISSED THIS? Read Section 1.6; Watch KCV 1.7, IWE 1.6
90. A flask containing 9.58 mL of a liquid weighs 156.5 g with the
liquid in the flask and 148.4 g when empty. Calculate the density
of the liquid in g/mL to the correct number of significant digits.
(The density is the mass of the liquid divided by its volume.)
Unit Conversions
91. Perform each unit conversion.
MISSED THIS? Read Section 1.8; Watch KCV 1.8, IWE 1.8
a. 27.8 L to cm3
b. 1898 mg to kg
c. 198 km to cm
92. Perform each unit conversion.
a. 28.9 nm to μm
b. 1432 cm3 to L
c. 1211 Tm to Gm
93. Perform each unit conversion between the English and metric
systems.
MISSED THIS? Read Section 1.8; Watch KCV 1.8, IWE 1.8
a. 212 cm to in
b. 2.98 kg to lb
c. 2.3 L to qt
d. 142 mm to in
94. Perform each unit conversion between the English and metric
systems.
a. 1.1 in to mm
b. 121 ft to cm
c. 1810 kg to lb
d. 825 yd to km
95. A runner wants to run 10.4 km at a pace of 8.3 miles per hour.
How many minutes must she run?
MISSED THIS? Read Section 1.8; Watch KCV 1.8, IWE 1.8
96. A cyclist rides at an average speed of 26 miles per hour. If she
wants to bike 190 km, how long (in hours) must she ride?
97. A certain European automobile has a gas mileage of 17 km/L.
What is the gas mileage in miles per gallon?
MISSED THIS? Read Section 1.8; Watch KCV 1.8, IWE 1.8
98. A gas can holds 5.8 gallons of gasoline. What is this quantity in cm3 ?
99. A modest-sized house has an area of 165 m2. What is its area in:
MISSED THIS? Read Section 1.8; Watch KCV 1.8, IWE 1.9
a. km2
b. dm2
c. cm2
100. A bedroom has a volume of 124 m3. What is its volume in:
a. km3
b. dm3
c. cm3
101. The average U.S. farm occupies 435 acres. How many square
miles is this? (1 acre = 43,560 ft2, 1 mile = 5280 ft)
MISSED THIS? Read Section 1.8; Watch KCV 1.8, IWE 1.9
102. Total U.S. farmland occupies 954 million acres. How many
square miles is this? (1 acre = 43,560 ft2, 1 mi = 5280 ft). Total
U.S. land area is 3.537 million square miles. What percentage of
U.S. land is farmland?
103. An acetaminophen suspension for infants contains 80 mg/
0.80 mL. The recommended dose is 15 mg/kg body weight. How
many mL of this suspension should be given to an infant weighing
15 lb? (Assume two significant figures.)
MISSED THIS? Read Section 1.8; Watch KCV 1.8, IWE 1.8
104. An ibuprofen suspension for infants contains 100 mg/5.0 mL.
The recommended dose is 10 mg/kg body weight. How many mL
of this suspension should be given to an infant weighing 15 lb?
(Assume two significant figures.)
CUMULATIVE PROBLEMS
105. There are exactly 60 seconds in a minute, exactly 60 minutes
in an hour, exactly 24 hours in a mean solar day, and 365.24
solar days in a solar year. How many seconds are in a solar
year? Give your answer with the correct number of significant
figures.
106. Determine the number of picoseconds in 1.6 hours.
M01_TRO8902_05_GE_C01.indd 85
107. Classify each property as intensive or extensive.
a. volume
b. boiling point
c. temperature
d. electrical conductivity
e. energy
31/07/2020 18:50
86
CHAPTER 1
Matter, Measurement, and Problem Solving
108. At what temperatures are the readings on the Fahrenheit and
Celsius thermometers the same?
109. Suppose you have designed a new thermometer called the X
thermometer. On the X scale, the boiling point of water is 125 °X,
and the freezing point of water is 17 °X. At what temperature are
the readings on the Fahrenheit and X thermometers the same?
110. On a new Jekyll temperature scale, water freezes at 17 °J and boils
at 97 °J. On another new temperature scale, the Hyde scale, water
freezes at 0 °H and boils at 120 °H. If methyl alcohol boils at 84
°H, what is its boiling point on the Jekyll scale?
111. Force is defined as mass times acceleration. Starting with SI base
units, derive a unit for force. Using SI prefixes, suggest a convenient
unit for the force resulting from a collision with a 10-ton trailer
truck moving at 55 mi per hour and for the force resulting from
the collision of a molecule of mass around 10 -20 kg moving almost
at the speed of light (3 * 108 m/s) with the wall of its container.
(Assume a 1-second deceleration time for both collisions.)
112. A temperature measurement of 25 °C has three significant figures, while a temperature measurement of -196 °C has only two
significant figures. Explain.
113. Do each calculation without using your calculator and give the
answers to the correct number of significant figures.
a. 1.74 * 10 -3 >8.5 * 102
b. 1.84 * 10 -2 + 3 * 10 -4 - 2.7 * 10 -3
c. 3(1.35 * 105)(0.000400)>0.0774(121.0)
114. The value of the euro was recently $1.15 U.S., and the price of
1 liter of gasoline in France is 1.42 euro. What is the price of
1 gallon of gasoline in U.S. dollars in France?
115. A thief uses a can of sand to replace a solid gold cylinder that sits
on a weight-sensitive, alarmed pedestal. The can of sand and the
gold cylinder have exactly the same dimensions (length = 22
and radius = 3.8 cm).
a. Calculate the mass of each cylinder (ignore the mass of
the can itself). (density of gold = 19.3 g/cm3, density of sand
= 3.00 g>cm3)
b. Does the thief set off the alarm? Explain.
116. The proton has a radius of approximately 1.0 * 10 -13 cm and a
mass of 1.7 * 10 -24 g. Determine the density of a proton. For a
sphere, V = (4>3)pr 3.
117. The density of titanium is 4.51 g/cm3. What is the volume (in
cubic inches) of 4.0 lb of titanium?
118. The density of titanium is 4.51 g/cm3. What is its density in
pounds per cubic inch (lb/in3)?
119. A steel cylinder has a length of 2.16 in, a radius of 0.22 in, and a
mass of 41 g. What is the density of the steel in g>cm3?
120. A solid aluminum sphere has a mass of 90 g. Use the density of
aluminum to find the radius of the sphere in inches.
121. A backyard swimming pool holds 200 cubic yards (yd3) of water.
What is the mass of the water in pounds?
122. An iceberg has a volume of 7655 ft2. What is the mass of the ice
(in kg) composing the iceberg (at 0 °C)?
123. The Toyota Prius, a hybrid electric vehicle, has an EPA gas
mileage rating of 52 mi/gal in the city. How many kilometers can
the Prius travel on 20 liters of gasoline?
M01_TRO8902_05_GE_C01.indd 86
124. The Honda Insight, a hybrid electric vehicle, has an EPA gas
mileage rating of 41 mi/gal in the city. How many kilometers can
the Insight travel on the amount of gasoline that would fit in a
soda can? The volume of a soda can is 355 mL.
125. The single proton that forms the nucleus of the hydrogen atom
has a radius of approximately 1.0 * 10 -13 cm. The hydrogen
atom itself has a radius of approximately 52.9 pm. What fraction
of the space within the atom is occupied by the nucleus?
126. A sample of gaseous neon atoms at atmospheric pressure and
0 °C contains 2.69 * 1022 atoms per liter. The atomic radius of
neon is 69 pm. What fraction of the space do the atoms themselves occupy? What does this reveal about the separation
between atoms in the gaseous phase?
127. The diameter of a hydrogen atom is 212 pm. Find the length in
kilometers of a row of 6.02 * 1023 hydrogen atoms. The diameter
of a ping pong ball is 4.0 cm. Find the length in kilometers of a
row of 6.02 * 1023 ping pong balls.
128. The world record in the men’s 100-m dash is 9.58 s, and in the
100-yd dash it is 9.07 s. Find the speed in mi/hr of the runners
who set these records. (Assume three significant figures for
100 m and 100 yd.)
129. Table salt contains 39.33 g of sodium per 100 g of salt. The U.S.
Food and Drug Administration (FDA) recommends that adults
consume less than 2.40 g of sodium per day. A particular snack
mix contains 1.25 g of salt per 100 g of the mix. What mass of
the snack mix can an adult consume and still be within the FDA
limit? (Assume three significant figures for 100 g.)
130. Lead metal can be extracted from a mineral called galena, which
contains 86.6% lead by mass. A particular ore contains 68.5%
galena by mass. If the lead can be extracted with 92.5% efficiency, what mass of ore is required to make a lead sphere with a
5.00-cm radius?
131. A length of #8 copper wire (radius = 1.63 mm) has a mass of
26.0 kg and a resistance of 2.061 ohm per km ( Ω/km). What is
the overall resistance of the wire?
132. Rolls of aluminum foil are 304 mm wide and 0.016 mm thick.
What maximum length of aluminum foil can be made from
1.13 kg of aluminum?
133. Liquid nitrogen has a density of 0.808 g/mL and boils at 77 K.
Researchers often purchase liquid nitrogen in insulated 175 L
tanks. The liquid vaporizes quickly to gaseous nitrogen (which
has a density of 1.15 g/L at room temperature and atmospheric
pressure) when the liquid is removed from the tank. Suppose
that all 175 L of liquid nitrogen in a tank accidentally vaporized
in a lab that measured 10.00 m * 10.00 m * 2.50 m. What
maximum fraction of the air in the room could be displaced by
the gaseous nitrogen?
134. Mercury is often used as an expansion medium in a thermometer.
The mercury sits in a bulb on the bottom of the thermometer and
rises up a thin capillary as the temperature rises. Suppose a mercury
thermometer contains 3.890 g of mercury and has a capillary that is
0.200 mm in diameter. How far does the mercury rise in the capillary
when the temperature changes from 0.0 °C to 25.0 °C? The density of
mercury at these temperatures is 13.596 g/cm3 and 13.534 g/cm3,
respectively.
31/07/2020 18:50
Exercises
87
CHALLENGE PROBLEMS
135. A force of 2.31 * 104 N is applied to a diver’s face mask
that has an area of 125 cm2. Find the pressure in atm on the
face mask.
136. The SI unit of force is the newton, derived from the base units
by using the definition of force, F = ma. The dyne is a non-SI
unit of force in which mass is measured in grams and time is
measured in seconds. The relationship between the two units
is 1 dyne = 10 -5 N. Find the unit of length used to define
the dyne.
137. Kinetic energy can be defined as 12 mv 2 or as 32 PV. Show that
the derived SI units of each of these terms are those of energy.
(Pressure is force/area and force is mass : acceleration.)
138. In 1999, scientists discovered a new class of black holes with
masses 100 to 10,000 times the mass of our sun that occupy less
space than our moon. Suppose that one of these black holes
has a mass of 1 * 103 suns and a radius equal to one-half the
radius of our moon. What is the density of the black hole in
g/cm3? The radius of our sun is 7.0 * 105 km, and it has an average density of 1.4 * 103 kg/m3. The diameter of the moon is
2.16 * 103 mi.
140. Nanotechnology, the field of building ultra-small structures
one atom at a time, has progressed in recent years. One potential application of nanotechnology is the construction of artificial cells. The simplest cells would mimic red blood cells, the
body’s oxygen transporters. These nanocontainers, constructed
of carbon, could be pumped full of oxygen and injected into a
person’s bloodstream. If the person needed additional oxygen—
due to a heart attack perhaps, or for the purpose of space
travel—these containers would slowly release oxygen into the
blood, allowing tissues that would otherwise die to remain
alive. Suppose that the cell-like nanocontainers are cubic and
have an edge length of 22 nanometers.
a. What is the volume of one nanocontainer? (Ignore the thickness of the nanocontainer’s wall.)
b. Suppose that each nanocontainer could contain pure oxygen pressurized to a density of 86 g/L. How many grams of
oxygen could be contained by each nanocontainer?
c. Normal air contains about 0.28 g of oxygen per liter. An
average human inhales about 0.50 L of air per breath and
takes about 20 breaths per minute. How many grams of oxygen does a human inhale per hour? (Assume two significant
figures.)
d. What is the minimum number of nanocontainers that a person would need in his or her bloodstream to provide one
hour’s worth of oxygen?
e. What is the minimum volume occupied by the number of
nanocontainers calculated in part d? Is such a volume feasible, given that total blood volume in an adult is about
5 liters?
139. In 1997, Los Angeles County air had carbon monoxide (CO)
levels of 15.0 ppm. An average human inhales about 0.50 L of
air per breath and takes about 20 breaths per minute. How many
milligrams of carbon monoxide does the average person inhale
in a 9-hour period for this level of carbon monoxide pollution?
Assume that the carbon monoxide has a density of 1.2 g/L.
(Hint: 15.0 ppm CO means 15.0 L CO per 106 L air.)
141. Approximate the percent increase in waist size that occurs when
a 233-lb person gains 55.0 lbs of fat. Assume that the volume of
the person can be modeled by a cylinder that is 6.0 ft tall. The
average density of a human is about 1.0 g/cm3, and the density
of fat is 0.918 g/cm3.
142. A box contains a mixture of small copper spheres and small lead
spheres. The total volume of both metals is measured by the displacement of water to be 427 cm3, and the total mass is 4.36 kg.
What percentage of the spheres are copper?
CONCEPTUAL PROBLEMS
143. A sublimative solid (one that easily sublimates) is put into a jar,
and the jar is then sealed. Does the mass of the sealed jar and its
contents change upon the sublimation of the solid?
144. The diagram shown first represents solid carbon dioxide, also
known as dry ice. Which of the other diagrams best represents
the dry ice after it has sublimed into a gas?
(a)
(b)
(c)
145. A cube has an edge length of 6 cm. If it is divided up into 1 cm
cubes, how many 1 cm cubes are there?
146. Solid A has a density of 170 g/dm3. Liquid B has a density of
1.7 * 102 kg/m3. Without doing any calculations, determine
which substance is denser.
M01_TRO8902_05_GE_C01.indd 87
31/07/2020 18:50
88
CHAPTER 1
Matter, Measurement, and Problem Solving
147. For each box, examine the blocks attached to the balances.
Based on their positions and sizes, determine which block is
more dense (the dark block or the lighter-colored block), or if the
relative densities cannot be determined. (Think carefully about
the information being shown.)
(b)
(a)
(c)
148. Let a triangle represent atoms of element A and a circle represent
atoms of element B.
a. Draw an atomic-level view of a homogeneous mixture of elements A and B.
b. Draw an atomic view of the compound AB in a liquid state
(molecules close together).
c. Draw an atomic view of the compound AB after it has undergone a physical change (such as evaporation).
d. Draw an atomic view of the compound after it has undergone a
chemical change (such as decomposition of AB into A and B).
149. Identify each statement as being most like an observation, a law,
or a theory.
a. All coastal areas experience two high tides and two low tides
each day.
b. The tides in Earth’s oceans are caused mainly by the gravitational attraction of the moon.
c. Yesterday, high tide in San Francisco Bay occurred at 2:43 a.m.
and 3:07 p.m.
d. Tides are higher at the full moon and new moon than at other
times of the month.
QUESTIONS FOR GROUP WORK
Discuss these questions with the group and record your consensus
answer.
150. Using white and black circles to represent different kinds of atoms,
make a drawing that accurately represents each sample of matter:
a solid element, a liquid compound, and a heterogeneous mixture.
Make a drawing (clearly showing before and after) depicting your
liquid compound undergoing a physical change. Make a drawing
depicting your solid element undergoing a chemical change.
151. Look up the measurement of the approximate thickness of a
human hair.
a. Convert the measurement to an SI unit (if it isn’t already).
b. Write it in scientific notation.
c. Write it without scientific notation.
d. Write it with an appropriate prefix on a base unit.
Now repeat these steps using the distance from Earth to
the sun.
Active Classroom Learning
152. The following statements are all true.
a. Jessica’s house is 5 km from the grocery store.
b. Jessica’s house is 4.73 km from the grocery store.
c. Jessica’s house is 4.73297 km from the grocery store.
How can all the statements be true? What does the number
of digits in each statement communicate? What sort of
device would Jessica need to make the measurement in each
statement?
153. One inch is equal to 2.54 cm. Draw a line that is 1 in long, and
mark the centimeters on the line. Draw a cube that is 1 in on
each side. Draw lines on each face of the cube that are 1 cm
apart. How many cubic centimeters are there in 1 in3?
154. Convert the height of each member in your group from feet and
inches to meters. Once you have your heights in meters, calculate the sum of all the heights. Use appropriate rules for significant figures at each step.
DATA INTERPRETATION AND ANALYSIS
Density of Water
155. The density of a substance can change with temperature. The
graph that follows displays the density of water from -150 °C to
100 °C. Examine the graph and answer the questions.
Density (kg/m3)
1,010
1,000
990
980
970
960
950
940
930
920
910
-150
-100
M01_TRO8902_05_GE_C01.indd 88
-50
0
50
Temperature ( o C)
a. Water undergoes a large change in density at 0 °C as it freezes
to form ice. Calculate the percent change in density that
occurs when liquid water freezes to ice at 0 °C.
final value - initial value
* 100%)
(Hint: % change =
initial value
3
b. Calculate the volume (in cm ) of 54 g of water at 1 °C and the
volume of the same mass of ice at -1 °C. What is the change
in volume?
c. Antarctica contains 26.5 million cubic kilometers of ice.
Assume the temperature of the ice is -20 °C. If all of this ice
were heated to 1 °C and melted to form water, what volume
of liquid water would form?
d. A 1.00-L sample of water is heated from 1 °C to 100 °C. What
is the volume of the water after it is heated?
100
31/07/2020 18:50
Exercises
89
Cc ANSWERS TO CONCEPTUAL CONNECTIONS
Laws and Theories
1.1 (b) A law only summarizes a series of related observations; a
theory gives the underlying reasons for them.
Pure Substances and Mixtures
1.2 (a) This image is a pure substance. More specifically, because it
contains two different type of atoms bonded together, it is a pure
compound.
Chemical and Physical Changes
1.3 View (a) best represents the water after vaporization. Vaporization is a physical change, so the molecules must remain the
same before and after the change.
Temperature Scale
1.5 (a) The Kelvin scale has no negative temperatures because 0 Kelvin
is the coldest possible temperature. Lower temperatures do not
exist. Both the Celsius scale and the Fahrenheit scale have negative temperatures.
Prefix Multipliers
1.6 (c) The prefix micro (10 -6) is appropriate. The measurement
would be reported as 55.7 mm.
Density
1.7 (c) The copper sample expands. However, because its mass
remains constant while its volume increases, its density decreases.
Energy
1.4 (c) Chemical energy is a type of potential energy that results
from the electrostatic forces between the charged particles that
compose atoms and molecules.
M01_TRO8902_05_GE_C01.indd 89
31/07/2020 18:50
These observations have
tacitly led to the
conclusion which seems
universally adopted, that
all bodies of sensible
magnitude . . . are
constituted of a vast
number of extremely
small particles, or atoms
of matter . . . .
C H A P T E R
—JOHN DALTON (1766–1844)
2
Atoms and Elements
I
f you cut a piece of graphite from the tip of a pencil into smaller
and smaller pieces, how far could you go? Could you divide it forever? Would you eventually run into some basic particles that were
no longer divisible, not because of their sheer smallness, but because
of the nature of matter? This fundamental question about the nature
of matter has been asked by thinkers for over two millennia. Their
answers have varied over time. On the scale of everyday objects,
matter appears continuous, or infinitely divisible. And until about
200 years ago, many scientists thought that matter was indeed continuous—but they were proven wrong. If you were to divide the graphite
from your pencil tip into smaller and smaller pieces (far smaller than
the eye could see), you would eventually end up with individual carbon atoms. The word atom comes from the Greek atomos, meaning
“indivisible.” You cannot divide a carbon atom into smaller pieces and
still have carbon. Atoms compose all ordinary matter—if you want to
understand matter, you must begin by understanding atoms.
90
M02_TRO8902_05_GE_C02.indd 90
09/08/20 20:42
Scottish botanist Robert Brown observed
random motion in tiny particles suspended
in water. This motion later confirmed the
particulate nature of matter.
2.1 Brownian Motion: Atoms Confirmed 91
2.2 Early Ideas about the Building
Blocks of Matter 93
2.3 Modern Atomic Theory and
the Laws That Led to It 93
2.4 The Discovery of the Electron 97
2.5 The Structure of the Atom 99
2.6 Subatomic Particles: Protons, Neutrons,
and Electrons in Atoms 101
2.1
2.7 Finding Patterns: The Periodic Law
and the Periodic Table 107
2.8 Atomic Mass: The Average Mass
of an Element’s Atoms 111
2.9 Molar Mass: Counting Atoms
by Weighing Them 115
LEARNING OUTCOMES 123
Brownian Motion: Atoms Confirmed
In 1827, Scottish botanist Robert Brown (1773–1858) looked through his
microscope at water-suspended particles that had come from pollen grains. He noticed
that the particles were in continuous motion. Any one particle traveled a random, jittery
91
M02_TRO8902_05_GE_C02.indd 91
09/08/20 20:42
92
CHAPTER 2
Atoms and Elements
▲ FIGURE 2.1 Imaging
Atoms
12 cobalt atoms arranged in
a circle on a copper surface.
The exact number of naturally
occurring elements is controversial
because some elements that were
first discovered when they were
synthesized are believed to also be
present in trace amounts in nature.
M02_TRO8902_05_GE_C02.indd 92
path through the liquid water. Brown initially thought that the particles might be alive
and were perhaps the male sexual cells of plants (similar to sperm). However, similar particles from plants long dead exhibited the same jittery motion, and so did dust from pulverized stones. Brown concluded that the source of the motion must not come from the
particles themselves. What was causing this motion?
The definitive answer to this question did not come until 1905, when Albert
Einstein (1879–1955) developed a theory that quantitatively explained what was by
then called Brownian motion. Einstein’s model explained that the particle motion
was the result of molecular bombardments of the particles due to the thermal energy
of the surrounding water. In other words, the water molecules in liquid water—
constantly in motion due to thermal energy—were continuously battering the
pollen and dust particles, causing them to jump around and move. In Einstein’s
model, the jittering pollen particles are like a beach ball that is thrown into a crowd
at a graduation ceremony. As the eager graduates strike the ball over and over again,
the ball moves through the crowd in a jittery random path. The difference is that,
in the case of Brownian motion, the “crowd” is composed of molecules much too
small to see.
In 1908, French physicist Jean Perrin (1870–1942) conducted experimental measurements to test Einstein’s model. His measurements confirmed that Einstein’s model
was valid. In 1926, Perrin was awarded the Nobel Prize in Physics. During the award
speech, the presenter said, “the object of the researches of Professor Jean Perrin which
have gained for him the Nobel Prize in Physics for 1926 was to put a definite end to the
long struggle regarding the real existence of molecules.” In other words, the work of
Einstein, and then Perrin, removed any lingering doubt about the particulate nature
of matter.
In Einstein’s day, the existence of atoms was inferred from the jittery motion
first witnessed by Brown. Today, with a type of microscope called a scanning tunneling microscope (STM), we can form images of atoms themselves. In fact, STM can be
used to pick up and move individual atoms, allowing structures and patterns to be
made one atom at a time. Figure 2.1◀, for example, shows 12 cobalt atoms arranged
in a circle on a copper surface. If all of the words in the books in the Library of Congress—38 million books occupying 840 miles of shelves—were written in letters the
size of this circle, they would fit into an area of about five square millimeters. Scientists at IBM have also succeeded in making a short video entitled A Boy and His Atom,
in which the main character (a boy) is animated using a few dozen atoms. In the
video, which has been viewed millions of times on YouTube, the boy plays with an
atom like a real boy would play with a ball.
As we discussed in Chapter 1, it was only 200 years ago that John Dalton proposed
his atomic theory, and about 100 years ago that the theory was confirmed through
the work of Einstein and Perrin. Yet today we can image atoms, move them, and even
build tiny machines out of just a few dozen atoms (an area of research called nanotechnology). These atomic machines, and the atoms that compose them, are almost
unimaginably small. To get an idea of the size of an atom, imagine picking up a grain
of sand at a beach. That grain contains more atoms than you could count in a lifetime.
In fact, the number of atoms in one sand grain far exceeds the number of grains on an
entire beach.
In spite of their small size, atoms are the key to connecting the macroscopic and
microscopic worlds. An atom is the smallest identifiable unit of an element. There are
about 91 different naturally occurring elements. In addition, scientists have succeeded in making over 20 synthetic elements (elements not found in nature). In this
chapter, we learn about atoms: what they are made of, how they differ from one
another, and how they are structured. We also learn about the elements that are composed of these different kinds of atoms and about some of their characteristic properties. We will also discuss how the elements can be organized in a way that reveals
patterns in their properties and helps us to understand what underlies those
properties.
09/08/20 20:42
2.3
2.2
Modern Atomic Theory and the Laws That Led to It
93
Early Ideas about the Building
Blocks of Matter
The first people to propose that matter was composed of small, indestructible particles were Leucippus (fifth century b.c., exact dates unknown) and his student
Democritus (460–370 b.c.). These Greek philosophers theorized that matter is ultimately
composed of small, indivisible particles they named atomos. Democritus wrote, “Nothing exists except atoms and empty space; everything else is opinion.” Leucippus and
Democritus proposed that many different kinds of atoms exist, each different in shape
and size, and that they move randomly through empty space. Other influential Greek
thinkers of the time, such as Plato and Aristotle, did not embrace the atomic ideas of
Leucippus and Democritus. Instead, Plato and Aristotle held that matter had no smallest parts and that different substances were composed of various proportions of fire, air,
earth, and water. Since there was no experimental way to test the relative merits of the
competing ideas, Aristotle’s view prevailed, largely because he was so influential. The
idea that matter is composed of atoms took a back seat in intellectual thought for nearly
2000 years.
In the sixteenth century, modern science began to emerge. A greater emphasis on
observation led Nicolaus Copernicus (1473–1543) to publish On the Revolution of the
Heavenly Orbs in 1543. The publication of that book—which proposed that the sun, not
Earth, is at the center of the universe—marks the beginning of what we now call the
scientific revolution. The next 200 years—and the work of scientists such as Francis Bacon
(1561–1626), Johannes Kepler (1571–1630), Galileo Galilei (1564–1642), Robert Boyle
(1627–1691), and Isaac Newton (1642–1727)—brought rapid advancement as the scientific approach became the established way to learn about the physical world. By the early
1800s, certain observations led the English chemist John Dalton (1766–1844) to offer
convincing evidence that supported the early atomic ideas of Leucippus and Democritus.
However, debate continued about whether atoms actually exist until the description of
Brownian motion by Einstein in 1905 and subsequent experimental verification of the
description in 1908 by Perrin (see Section 2.1).
2.3
Modern Atomic Theory and
the Laws That Led to It
Recall the discussion of the scientific approach to knowledge from
Chapter 1. The atomic theory (the idea that all matter is composed of atoms) grew out of
observations and laws. The three most important laws that led to the development and
acceptance of the atomic theory are the law of conservation of mass, the law of definite
proportions, and the law of multiple proportions.
WATCH NOW!
KEY CONCEPT VIDEO 2.3
Atomic Theory
The Law of Conservation of Mass
In 1789, as we saw in Chapter 1, Antoine Lavoisier formulated the law of conservation
of mass, which states:
In a chemical reaction, matter is neither created nor destroyed.
In other words, when a chemical reaction occurs, the total mass of the substances
involved in the reaction does not change. For example, consider the reaction between
sodium and chlorine to form sodium chloride. The combined mass of the sodium and
chlorine that react (the reactants) exactly equals the mass of the sodium chloride that
forms (the product). This law is consistent with the idea that matter is composed of small,
indestructible particles. The particles rearrange during a chemical reaction, but the
amount of matter is conserved because the particles themselves are indestructible
(at least by chemical means).
M02_TRO8902_05_GE_C02.indd 93
We will see in Chapter 21 that the
law of conservation of mass is a
slight oversimplification. However,
the changes in mass in ordinary
chemical processes are so minute
that they can be ignored for all
practical purposes.
09/08/20 20:42
94
CHAPTER 2
Atoms and Elements
Mass of reactants = Mass of product
Total mass = 19.6 g
7.7 g Na
Na(s)
ANSWER NOW!
2.1
Cc
Conceptual
Connection
19.6 g NaCl
11.9 g Cl2
Cl2 (g)
NaCl(s)
THE LAW OF CONSERVATION OF MASS When a log completely burns in a campfire, the mass of the ash is much less than the mass of the log.
What happens to the matter that composed the log?
(a) The matter that composed the log reacts to form gases that are released into the air.
(b) The matter that composed the log is converted into energy.
(c) The matter that composed the log is still present in the ashes but has a much
lower mass.
The Law of Definite Proportions
The law of definite proportions
is sometimes called the law of
constant composition.
In 1797, the French chemist Joseph Proust (1754–1826) made observations on the composition of compounds. He found that the elements composing a given compound
always occur in fixed (or definite) proportions in all samples of the compound. In contrast, the components of a mixture can be present in any proportions whatsoever. Proust
summarized his observations in the law of definite proportions:
All samples of a given compound, regardless of their source or how
they were prepared, have the same proportions of their constituent
elements.
For example, the decomposition of 18.0 g of water results in 16.0 g of oxygen and 2.0 g
of hydrogen, or an oxygen-to-hydrogen mass ratio of:
Mass ratio =
16 .0 g O
2 .0 g H
= 8 .0 or 8:1
This ratio holds for any sample of pure water, regardless of its origin. The law of definite
proportions applies to every compound. Consider ammonia, a compound composed of
nitrogen and hydrogen. Ammonia contains 14.0 g of nitrogen for every 3.0 g of hydrogen,
resulting in a nitrogen-to-hydrogen mass ratio of 4.7.
Mass ratio =
M02_TRO8902_05_GE_C02.indd 94
14.0 g N
3.0 g H
= 4.7 or 4 .7:1
09/08/20 20:42
2.3
Modern Atomic Theory and the Laws That Led to It
95
Again, this ratio is the same for every sample of ammonia. The law of definite proportions also hints at the idea that matter is composed of atoms. Compounds have definite proportions of their constituent elements because the atoms that compose them,
each with its own specific mass, occur in a definite ratio. Since the ratio of atoms is the
same for all samples of a particular compound, the ratio of masses is also the same.
LAW OF DEFINITE PROPORTIONS We just saw that the mass ratio
of nitrogen to hydrogen in ammonia is 4.7:1. If a sample of ammonia contains 10.0 g of
H, how many grams of N does it contain?
(a) 4.7
(b) 9.4
EXAMPLE 2.1
(c) 14
(d) 47
2.2
Cc
ANSWER NOW!
Conceptual
Connection
Law of Definite Proportions
Two samples of carbon dioxide are decomposed into their constituent elements.
One sample produces 25.6 g of oxygen and 9.60 g of carbon, and the other
produces 21.6 g of oxygen and 8.10 g of carbon. Show that these results are
consistent with the law of definite proportions.
SOLUTION
To show this, for both samples calculate the mass ratio of one element to
the other by dividing the mass of one
element by the mass of the other. For
convenience, divide the larger mass by
the smaller one.
For the first sample:
Mass oxygen
Mass carbon
=
25.6
= 2.67 or 2.67:1
9.60
For the second sample:
Mass oxygen
Mass carbon
=
21.6
= 2.67 or 2.67:1
8.10
The ratios are the same for the two samples, so these results are consistent with the
law of definite proportions.
FOR PRACTICE 2.1 Two samples of carbon monoxide are decomposed into their
constituent elements. One sample produces 17.2 g of oxygen and 12.9 g of carbon,
and the other sample produces 10.5 g of oxygen and 7.88 g of carbon. Show that
these results are consistent with the law of definite proportions.
Answers to For Practice and For
More Practice Problems can be
found in Appendix IV.
The Law of Multiple Proportions
In 1804, John Dalton published his law of multiple proportions:
When two elements (call them A and B) form two different compounds, the masses of element B that combine with 1 g of element A
can be expressed as a ratio of small whole numbers.
Dalton suspected that matter was composed of atoms, so that when two elements A and B
combine to form more than one compound, an atom of A combines with either one, two,
three, or more atoms of B 1AB1, AB2, AB3, etc.2. Therefore, the masses of B that react with
a fixed mass of A are always related to one another as small whole-number ratios. Consider the compounds carbon monoxide and carbon dioxide. Carbon monoxide and
carbon dioxide are two compounds composed of the same two elements: carbon and
oxygen. We saw in Example 2.1 that the mass ratio of oxygen to carbon in carbon dioxide
is 2.67:1; therefore, 2.67 g of oxygen reacts with 1 g of carbon. In carbon monoxide, however, the mass ratio of oxygen to carbon is 1.33:1, or 1.33 g of oxygen to every 1 g of
carbon.
The ratio of these two masses is itself a small whole number.
Mass oxygen to 1 g carbon in carbon dioxide
Mass oxygen to 1 g carbon in carbon monoxide
M02_TRO8902_05_GE_C02.indd 95
=
2.67
= 2
1.33
Carbon dioxide
Mass oxygen that
combines with
1 g carbon = 2.67 g
Carbon monoxide
Mass oxygen that
combines with
1 g carbon = 1.33 g
09/08/20 20:42
96
CHAPTER 2
Atoms and Elements
With the help of the molecular models in the margin on the preceding page, we can
see why the ratio is 2:1—carbon dioxide contains two oxygen atoms to every carbon atom,
while carbon monoxide contains only one. Of course, neither John Dalton nor Joseph
Proust had access to any kind of modern instrumentation that could detect individual
atoms—Dalton supported his atomic ideas primarily by using the masses of samples.
EXAMPLE 2.2
Law of Multiple Proportions
Nitrogen forms several compounds with oxygen, including nitrogen dioxide and dinitrogen monoxide. Nitrogen dioxide
contains 2.28 g oxygen to every 1.00 g nitrogen, while dinitrogen monoxide contains 0.570 g oxygen to every 1.00 g
nitrogen. Show that these results are consistent with the law of multiple proportions.
SOLUTION
Calculate the ratio of the mass of oxygen from
one compound to the mass of oxygen in the
other. Always divide the larger of the two
masses by the smaller one.
Mass oxygen to 1 g nitrogen in nitrogen dioxide
Mass oxygen to 1 g nitrogen in dinitrogen monoxide
=
2.28
= 4.00
0.570
The ratio is a small whole number (4); these results are consistent with the law of multiple proportions.
FOR PRACTICE 2.2 Hydrogen and oxygen form both water and hydrogen peroxide. The decomposition of a sample of
water forms 0.125 g hydrogen to every 1.00 g oxygen. The decomposition of a sample of hydrogen peroxide forms 0.0625 g
hydrogen to every 1.00 g oxygen. Show that these results are consistent with the law of multiple proportions.
John Dalton and the Atomic Theory
In 1808, John Dalton explained the laws we just discussed with his atomic theory:
In Section 2.6, we will see that,
contrary to Dalton’s theory, all
atoms of a given element do not
have exactly the same mass.
1. Each element is composed of tiny, indestructible particles called atoms.
2. All atoms of a given element have the same mass and other properties that distinguish them from the atoms of other elements.
3. Atoms combine in simple, whole-number ratios to form compounds.
4. Atoms of one element cannot change into atoms of another element. In a chemical
reaction, atoms only change the way they are bound together with other atoms.
Today, the evidence for the atomic theory is overwhelming. Matter is indeed composed
of atoms.
CHEMISTRY IN YOUR DAY | Atoms and Humans
Y
ou and I are composed of atoms. We get those atoms
from the food we eat. Yesterday’s cheeseburger contributes to today’s skin, muscle, and hair. Not only are we
made of atoms, but we are made of recycled atoms. The carbon atoms that compose our bodies were used by other living
organisms before we got them. And they will be used by still
others when we are done with them. In fact, it is likely that at this
moment, your body contains some (over one trillion*) carbon
atoms that were at one time part of your chemistry professor.
The idea that humans are composed of atoms acting in
accord with the laws of chemistry and physics has significant
implications and raises important questions. If atoms compose
our brains, for example, do those atoms determine our thoughts
and emotions? Are our feelings caused by atoms acting
according to the laws of chemistry and physics?
*This calculation assumes that all of the carbon atoms metabolized by
your professor over the last 40 years have been uniformly distributed into
atmospheric carbon dioxide, and subsequently incorporated into the
plants you have eaten.
M02_TRO8902_05_GE_C02.indd 96
Richard Feynman (1918–1988), a Nobel Prize–winning
physicist, said that “The most important hypothesis in all of
biology is that everything that animals do, atoms do. In other
words, there is nothing that living things do that cannot be
understood from the point of view that they are made of atoms
acting according to the laws of physics.” Indeed, biology has
undergone a revolution in the last 50 years, mostly through
investigation of the atomic and molecular basis for life. Some
people have seen the atomic view of life as a devaluation of
human life. We have always wanted to distinguish ourselves from
everything else, and the idea that we are made of the same
basic particles as all other matter takes something away from
that distinction . . . or does it?
QUESTION Do you find the idea that you are made of recycled
atoms disturbing? Why or why not? Reductionism is the idea that
complex systems can be understood by understanding their
parts. Is reductionism a good way to understand humans? Is it the
only way?
09/08/20 20:42
2.4
THE LAWS OF DEFINITE AND MULTIPLE PROPORTIONS
Which statement best captures one of the differences between the law of definite proportions and the law of multiple proportions?
(a) The law of definite proportions applies to two or more samples of the same
compound, while the law of multiple proportions applies to two different
compounds containing the same two elements (A and B).
(b) The law of definite proportions applies to two different compounds containing the
same two elements (A and B), while the law of multiple proportions applies to
two or more samples of the same compound.
(c) None of the above. Both laws apply to multiple samples of the same compound.
2.4
The Discovery of the Electron
By the end of the nineteenth century, scientists were convinced that matter is made up of atoms, the permanent, supposedly indestructible building blocks that
compose everything. However, further experiments revealed that the atom itself is composed of even smaller, more fundamental particles.
Cathode Rays
In the late 1800s, an English physicist named J. J. Thomson (1856–1940), working at
Cambridge University, performed experiments to probe the properties of cathode
rays. Thomson constructed a partially evacuated glass tube called a cathode ray tube,
shown in Figure 2.2▼. Thomson then applied a high electrical voltage between two
electrodes at either end of the tube. He found that a beam of particles, called cathode
rays, traveled from the negatively charged electrode (which is called the cathode) to the
positively charged one (which is called the anode).
Thomson found that the particles that compose the cathode ray have the following
properties: they travel in straight lines; they are independent of the composition of the
material from which they originate (the cathode); and they carry a negative electrical
charge. Electrical charge is a fundamental property of some of the particles that compose atoms and results in attractive and repulsive forces—called electrostatic forces—
between those particles. The area around a charged particle where these forces exist is
called an electric field. The characteristics of electrical charge are summarized in the figure in the margin. You have probably experienced excess electrical charge when brushing your hair on a dry day. The brushing action causes the accumulation of charged
particles in your hair, which repel each other, making your hair stand on end.
J. J. Thomson measured the charge-to-mass ratio of the cathode ray particles by
deflecting them using electric and magnetic fields, as shown in Figure 2.3▶. The value
he measured, -1.76 * 108 coulombs (C) per gram, implied that the cathode ray particle
Cathode
97
The Discovery of the Electron
2.3
Cc
ANSWER NOW!
Conceptual
Connection
Properties of Electrical Charge
Positive (red) and negative (yellow)
electrical charges attract one another.
+
-
-
Positive charges repel one another.
Negative charges repel one another.
+
+
-
-
Positive and negative charges of exactly
the same magnitude sum to zero when
combined.
+
+
-
+1
+
(-1)
-
+
=
0
For a full explanation of electrical
voltage, see Chapter 20.
The coulomb (C) is the SI unit for
charge.
Anode
Cathode rays
+
-
Partially evacuated
glass tube
High voltage
M02_TRO8902_05_GE_C02.indd 97
◀ FIGURE 2.2
Cathode Ray Tube
09/08/20 20:42
98
CHAPTER 2
Atoms and Elements
▶ FIGURE 2.3 Thomson’s
Measurement of the Chargeto-Mass Ratio of the Electron
J. J. Thomson used electric and
magnetic fields to deflect the electron
beam in a cathode ray tube. By
measuring the strengths at which the
effects of the two fields (electric and
magnetic) cancel exactly, leaving the
beam undeflected, he was able to
calculate the charge-to-mass ratio of
the electron.
Charge-to-Mass Ratio of the Electron
Electric and magnetic fields
deflect the electron beam.
Electron beam
N
Anode
Cathode
+
-
+
Undeflected
electron beam
Deflected
beams
S
Evacuated tube
Magnet
Electrically charged plates
was about 2000 times lighter (less massive) than hydrogen, the lightest known atom.
These results were revolutionary—the indestructible atom could apparently be chipped!
J. J. Thomson had discovered the electron, a negatively charged, low-mass particle
present within all atoms. He wrote, “We have in the cathode rays matter in a new state, a
state in which the subdivision of matter is carried very much further . . . a state in which
all matter . . . is of one and the same kind; this matter being the substance from which all
the chemical elements are built up.”
Millikan’s Oil Drop Experiment: The Charge
of the Electron
In 1909, American physicist Robert Millikan (1868–1953), working at the University
of Chicago, performed his now famous oil drop experiment in which he deduced the
charge of a single electron. The apparatus for the oil drop experiment is shown in
Figure 2.4▼.
In his experiment, Millikan sprayed oil into fine droplets using an atomizer. The
droplets were allowed to fall under the influence of gravity through a small hole into the
lower portion of the apparatus where Millikan viewed them with the aid of a light source
and a viewing microscope. During their fall, the drops acquired electrons
Millikan had produced by bombarding the air in the chamber with ionizing radiation
(a kind of energy described in Chapter 8). The
electrons imparted a negative charge to the drops. In
the lower portion of the apparatus, Millikan could
Atomizer
create an electric field between two metal plates. Since
Positively
the lower plate was negatively charged, and since
charged plate
Millikan could vary the strength of the electric field,
he could slow or even reverse the free fall of the negatively charged drops. (Remember that like charges
Ionizing
repel each other.)
radiation
By measuring the strength of the electric field
required to halt the free fall of the drops and by figurLight
Viewing
source
ing out the masses of the drops themselves (determicroscope
mined from their radii and density), Millikan
calculated the charge of each drop. He then reasoned
that, since each drop must contain an integral (or
whole) number of electrons, the charge of each drop
Negatively
Charged oil droplets are
charged plate
suspended in the electric field.
must be a whole-number multiple of the electron’s
charge. Indeed, Millikan was correct; the measured
▲ FIGURE 2.4 Millikan’s Measurement of the Electron’s
charge on any drop is always a whole-number multiCharge Millikan calculated the charge on oil droplets falling in an electric
ple of -1.60 * 10 -19 C, the fundamental charge of a
field. He found that it was always a whole-number multiple of - 1.60 * 10-19 C,
single electron.
the charge of a single electron.
M02_TRO8902_05_GE_C02.indd 98
09/08/20 20:42
2.5 The Structure of the Atom
99
With this number in hand and knowing Thomson’s mass-to-charge ratio for electrons, we can deduce the mass of an electron:
charge *
-1.60 * 10 -19 C *
mass
= mass
charge
g
- 1.76 * 108 C
= 9.10 * 10 -28 g
As Thomson had correctly determined, this mass is about 2000 times less than hydrogen, the lightest atom.
Why did scientists work so hard to measure the charge of the electron? Since the
electron is a fundamental building block of matter, scientists want to know its properties, including its charge. The magnitude of the charge of the electron is of tremendous
importance because it determines how strongly an atom holds its electrons. On one
hand, imagine how matter would be different if electrons had a much smaller charge, so
that atoms held them more loosely. Many atoms might not even be stable. On the other
hand, imagine how matter would be different if electrons had a much greater charge, so
that atoms held them more tightly. Since atoms form compounds by exchanging and
sharing electrons (more on this in Chapter 3), there could be fewer compounds or maybe
even none. Without the abundant diversity of compounds, life would not be possible.
So, the magnitude of the charge of the electron—even though it may seem like an insignificantly small number—has great importance.
THE MILLIKAN OIL DROP EXPERIMENT Suppose that one of
Millikan’s oil drops has a charge of -4.8 * 10 -19 C. How many excess electrons does the
drop contain?
(a) 1
2.5
(b) 2
(c) 3
(d) 4
Cc
ANSWER NOW!
Conceptual
Connection
The Structure of the Atom
The discovery of negatively charged particles within atoms raised a new
question. Since atoms are charge-neutral, they must contain a positive charge that
neutralizes the negative charge of the electrons—but how do the positive and negative
charges fit together? Are atoms just a jumble of even more fundamental particles? Are
they solid spheres? Do they have some internal structure? J. J. Thomson proposed that the
negatively charged electrons were small particles held within a positively charged sphere.
This model, the most popular of the time, became known as the plum-pudding
model. The model suggested by Thomson, to those of us not familiar with plum pudding
(an English dessert), was like a blueberry muffin; the blueberries are the electrons, and
the muffin is the positively charged sphere.
The discovery of radioactivity—the emission of small energetic particles from
the core of certain unstable atoms—by scientists Henri Becquerel (1852–1908) and Marie
Curie (1867–1934) at the end of the nineteenth century allowed researchers to experimentally probe the structure of the atom. At the time, scientists had identified three different types of radioactivity: alpha (a) particles, beta (b) particles, and gamma (g) rays.
We will discuss these and other types of radioactivity in more detail in Chapter 21. For
now, just know that a particles are positively charged and that they are by far the most
massive of the three.
In 1909, Ernest Rutherford (1871–1937), who had worked under Thomson and subscribed to his plum-pudding model, performed an experiment in an attempt to confirm
Thomson’s model. Instead, Rutherford’s experiment, which employed a particles,
proved Thomson wrong. In the experiment, Rutherford directed the positively charged
a particles at an ultrathin sheet of gold foil, as shown in Figure 2.5▶.
M02_TRO8902_05_GE_C02.indd 99
2.4
Electron
Sphere of
positive charge
Plum-pudding model
Alpha particles are about 7000
times more massive than electrons.
09/08/20 20:42
100
CHAPTER 2 Atoms and Elements
▶ FIGURE 2.5 Rutherford’s Gold
Foil Experiment
Rutherford’s Gold Foil Experiment
Positively charged a particles
are directed at an ultrathin
sheet of gold foil.
A few a particles are deflected
through large angles.
Most a particles pass through
with little or no deflection.
Gold foil
Alpha particles
Source
Lead
Detector
These particles were to act as probes of the gold atoms’ structure. If the gold atoms
were indeed like blueberry muffins or plum pudding—with their mass and charge spread
throughout the entire volume of the atom—Rutherford reasoned that these speeding
probes would pass right through the gold foil with minimum deflection.
Rutherford and his coworkers performed the experiment, but the results were not
what they expected. The majority of the particles did pass directly through the foil, but
some particles were deflected, and some (approximately 1 in 20,000) even bounced
back. The results puzzled Rutherford, who wrote that they were “about as credible as if
you had fired a 15-inch shell at a piece of tissue paper and it came back and hit you.”
What sort of atomic structure could explain this odd behavior? Rutherford created a new
model—a modern version of which is shown in Figure 2.6▼ alongside the plum-pudding
model—to explain his results.
Rutherford realized that to account for the deflections he observed, the mass and
positive charge of an atom must be concentrated in a space much smaller than the size
of the atom itself. He concluded that, in contrast to the plum-pudding model, matter
must not be as uniform as it appears. It must contain large regions of empty space dotted
with small regions of very dense matter. Building on this idea, he proposed the nuclear
theory of the atom, with three basic parts:
1. Most of the atom’s mass and all of its positive charge are contained in a small core
called the nucleus.
2. Most of the volume of the atom is empty space, throughout which tiny, negatively
charged electrons are dispersed.
3. There are as many negatively charged electrons outside the nucleus as there are
positively charged particles (named protons) within the nucleus, so the atom is
electrically neutral.
Predicted Result
Actual Result
Alpha particles
Nucleus Electron cloud
▶ FIGURE 2.6 The Nuclear
Atom
Rutherford’s results could not
be explained by the plum-pudding
model. Instead, they suggest that the
atom has a small, dense nucleus.
M02_TRO8902_05_GE_C02.indd 100
Proton
Neutron
Plum-pudding model
Nuclear model
09/08/20 20:42
2.6
Subatomic Particles: Protons, Neutrons, and Electrons in Atoms
101
Although Rutherford’s model was highly successful, scientists realized that it was
incomplete. For example, hydrogen atoms contain one proton, and helium atoms contain two, yet a hydrogen atom has only one-fourth the mass of a helium atom. Why?
The helium atom must contain some additional mass. Later work by Rutherford and one
of his students, British scientist James Chadwick (1891–1974), demonstrated that the
previously unaccounted for mass was due to neutrons, neutral particles within the
nucleus. The mass of a neutron is similar to that of a proton, but a neutron has no electrical charge. The helium atom is four times as massive as the hydrogen atom because its
nucleus contains two protons and two neutrons (while hydrogen contains only one
proton and no neutrons).
The dense nucleus contains over 99.9% of the mass of the atom but occupies very
little of its volume. For now, we can think of the electrons that surround the nucleus in
analogy to the water droplets that make up a cloud—their mass is almost negligibly
small, but they are dispersed over a very large volume. Consequently, an atom, like a
cloud, is mostly empty space.
Rutherford’s nuclear theory was a success and is still valid today. The revolutionary
part of this theory is the idea that matter—at its core—is much less uniform than it
appears. If the nucleus of the atom were the size of the period at the end of this sentence,
the average electron would be about 10 meters away. Yet the period would contain nearly
all of the atom’s mass. Imagine what matter would be like if atomic structure were different. What if matter were composed of atomic nuclei piled on top of each other like marbles in a box? Such matter would be incredibly dense; a single grain of sand composed of
solid atomic nuclei would have a mass of 5 million kilograms (or a weight of about
11 million pounds). Astronomers believe there are some objects in the universe composed of such matter—neutron stars.
If matter really is mostly empty space, as Rutherford suggested, then why does it
appear so solid? Why can we tap our knuckles on a table and feel a solid thump? Matter
appears solid because the variation in its density is on such a small scale that our eyes
cannot see it. Imagine a scaffolding 100 stories high and the size of a football field as
shown in the margin. The volume of the scaffolding is mostly empty space. Yet if you
viewed it from an airplane, it would appear as a solid mass. Matter is similar. When you
tap your knuckle on the table, it is much like one giant scaffolding (your finger) crashing
into another (the table). Even though they are both primarily empty space, one does not
fall into the other.
2.6
Subatomic Particles: Protons, Neutrons,
and Electrons in Atoms
All atoms are composed of the same subatomic particles: protons, neutrons, and electrons. Protons and neutrons, as we discussed earlier, have nearly identical masses. In SI units, the mass of the proton is 1.67262 * 10 -27 kg, and the mass of
the neutron is 1.67493 * 10 -27 kg. A more common unit to express these masses is
the atomic mass unit (amu), defined as 1/12 the mass of a carbon atom that contains six protons and six neutrons. The mass of a proton or neutron is approximately
1 amu. Electrons, by contrast, have an almost negligible mass of 0.00091 * 10 -27 kg or
0.00055 amu.
The proton and the electron both have electrical charge. We know from Millikan’s
oil drop experiment that the electron has a charge of -1.60 * 10 -19 C. In atomic
(or relative) units, the electron is assigned a charge of -1 and the proton is assigned a
charge of +1. The charge of the proton and the charge of the electron are equal in magnitude but
opposite in sign, so that when the two particles are paired, the charges sum to zero. The
neutron has no charge.
Matter is usually charge-neutral (it has no overall charge) because protons and electrons are normally present in equal numbers. When matter does acquire charge imbalances, these imbalances usually equalize quickly, often in dramatic ways. For example,
the shock you receive when touching a doorknob during dry weather is the equalization
M02_TRO8902_05_GE_C02.indd 101
WATCH NOW!
KEY CONCEPT VIDEO 2.6
Subatomic Particles and
Isotope Symbols
If a proton had the mass of a
baseball, an electron would
have the mass of a rice grain.
Rice grain
09/08/20 20:42
102
CHAPTER 2 Atoms and Elements
Negative charge builds up on clouds.
Electrical discharge equalizes
charge imbalance.
of a charge imbalance that developed as you walked across the carpet. Lightning is an
equalization of charge imbalances that develop during electrical storms.
A sample of matter—even a tiny sand grain—composed of only protons or only
electrons would be unstable due to extraordinarily strong repulsive forces within it.
Luckily, matter is not that way. Table 2.1 summarizes the properties of protons, neutrons, and electrons.
TABLE 2.1 ■ Subatomic Particles
Mass (amu)
Charge (relative)
Charge (C)
Proton
Mass (kg)
1.67262 * 10
-27
1.00727
+1
+ 1.60218 * 10 -19
Neutron
1.67493 * 10 -27
1.00866
0
0
Electron
0.00091 * 10 -27
0.00055
-1
- 1.60218 * 10 -19
Positive charge builds up on ground.
Elements: Defined by Their Numbers of Protons
▲ When the normal charge balance
of matter is disturbed, as happens
during an electrical storm, it quickly
equalizes, often in dramatic ways.
If all atoms are composed of the same subatomic particles, what makes the atoms of one element different from those of another? The answer is the number of these particles. The most
important number to the identity of an atom is the number of protons in its nucleus. The
number of protons defines the element. For example, an atom with two protons in its nucleus
is a helium atom, an atom with six protons in its nucleus is a carbon atom (Figure 2.7▼),
and an atom with 92 protons in its nucleus is a uranium atom. The number of protons in
an atom’s nucleus is its atomic number and is given the symbol Z. The atomic numbers
of known elements range from 1 to 118 (although evidence for the synthesis of additional
elements is currently being considered), as shown in the periodic table of the elements
(Figure 2.8▶). In the periodic table, described in more detail in Section 2.7, the elements are
arranged so that those with similar properties are in the same column.
Each element, identified by its unique atomic number, is represented with a unique
chemical symbol, a one- or two-letter abbreviation listed directly below its atomic
number on the periodic table. The chemical symbol for helium is He; for carbon, the
symbol is C; and for uranium, it is U. The chemical symbol and the atomic number
always go together. If the atomic number is 2, the chemical symbol must be He. If the
atomic number is 6, the chemical symbol must be C. This is another way of saying that
the number of protons defines the element.
Most chemical symbols are based on the English name of the element. For example,
the symbol for sulfur is S; for oxygen, O; and for chlorine, Cl. Several of the oldest known
The Number of Protons Defines the Element
▶ FIGURE 2.7 How Elements
Differ
Each element is defined
by a unique atomic number (Z ), the
number of protons in the nucleus of
every atom of that element.
M02_TRO8902_05_GE_C02.indd 102
Helium
nucleus:
2 protons
Carbon
nucleus:
6 protons
09/08/20 20:42
2.6
103
Subatomic Particles: Protons, Neutrons, and Electrons in Atoms
The Periodic Table
Atomic number (Z)
4
Be
Chemical symbol
beryllium
1
H
2
He
Name
hydrogen
3
helium
4
5
6
7
8
9
10
Li
Be
B
C
N
O
F
Ne
lithium
beryllium
boron
carbon
nitrogen
oxygen
fluorine
neon
11
12
13
14
15
16
S
17
Cl
Ar
argon
Al
Mg
sodium
magnesium
aluminum
silicon
phosphorus
sulfur
chlorine
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
K
Ca
Sc
Ti
V
Cr
Mn
Fe
Co
Ni
Cu
Zn
Ga
Ge
As
Se
Br
Kr
potassium
calcium
scandium
titanium
vanadium
chromium
manganese
iron
cobalt
nickel
copper
zinc
gallium
germanium
arsenic
selenium
bromine
krypton
37
Rb
38
Sr
39
Y
40
Zr
41
Nb
42
Mo
43
Tc
44
Ru
45
Rh
46
Pd
47
Ag
48
Cd
49
In
50
51
52
53
I
Xe
rubidium
strontium
yttrium
zirconium
niobium
molybdenum
technetium
ruthenium
rhodium
palladium
silver
cadmium
xenon
55
56
57
72
73
74
76
Os
77
78
79
80
Cs
Ba
La
Hf
Ta
W
75
Re
cesium
barium
lanthanum
hafnium
tantalum
tungsten
rhenium
osmium
iridium
87
88
89
104
105
106
107
108
109
Fr
Ra
Ac
Rf
Db
Sg
Bh
Hs
francium
radium
actinium
rutherfordium
dubnium
seaborgium
bohrium
hassium
Ir
Pt
Si
P
18
Na
54
Sn
Sb
Te
indium
tin
antimony
tellurium
iodine
81
82
83
Bi
84
Po
85
At
Rn
Pb
86
Au
Hg
Tl
platinum
gold
mercury
thallium
lead
bismuth
polonium
astatine
radon
110
111
112
113
114
115
116
117
118
Mt
Ds
Rg
Cn
Nh
Fl
Mc
Lv
Tn
Og
meitnerium
darmstadtium
roentgenium
copernicium
nihonium
flerovium
moscovium
livermorium
tennessine
oganesson
58
59
60
61
62
63
64
65
66
67
68
69
70
71
Ce
Pr
Nd
Pm
Sm
Eu
Gd
Tb
Dy
Ho
Er
Tm
Yb
Lu
cerium
praseodymium
neodymium
promethium
samarium
europium
gadolinium
terbium
dysprosium
holmium
erbium
thulium
ytterbium
lutetium
90
91
92
93
94
95
96
97
98
99
100
101
102
103
Th
Pa
U
Np
Pu
Am
Cm
Bk
Cf
Es
Fm
Md
No
Lr
thorium
protactinium
uranium
neptunium
plutonium
americium
curium
berkelium
californium
einsteinium
fermium
mendelevium
nobelium
lawrencium
▲ FIGURE 2.8 The Periodic Table Each element is represented by its symbol and atomic
number. Elements in the same column have similar properties.
elements, however, have symbols based on their original Latin names. For example, the
symbol for sodium is Na from the Latin natrium, and the symbol for tin is Sn from the
Latin stannum. Early scientists often gave newly discovered elements names that reflect
their properties. For example, argon originates from the Greek word argos meaning inactive, referring to argon’s chemical inertness (it does not react with other elements).
Chlorine originates from the Greek word chloros meaning pale green, referring to chlorine’s pale green color. Other elements, including helium, selenium, and mercury, are
named after figures from Greek or Roman mythology or astronomical bodies. Still others
(such as europium, polonium, and berkelium) are named for the places where they were
discovered or where their discoverers were born. More recently, elements have been named
after scientists; for example, curium for Marie Curie, einsteinium for Albert Einstein,
and rutherfordium for Ernest Rutherford.
ATOMIC NUMBER Which element contains 50 protons in its nucleus?
(a) tin
(b) vanadium
(c) manganese
(d) fermium
2.5
Cc
ANSWER NOW!
Conceptual
Connection
Isotopes: When the Number of Neutrons Varies
All atoms of a given element have the same number of protons; however, they do not necessarily have the same number of neutrons. Since neutrons have nearly the same mass as
protons (1 amu), this means that—contrary to what John Dalton originally proposed in
M02_TRO8902_05_GE_C02.indd 103
09/08/20 20:42
104
CHAPTER 2 Atoms and Elements
96
Cm
curium
his atomic theory—all atoms of a given element do not have the same mass. For example,
all neon atoms contain 10 protons, but they may contain 10, 11, or 12 neutrons. All three
types of neon atoms exist, and each has a slightly different mass. Atoms with the same
number of protons but different numbers of neutrons are isotopes. Some elements,
such as beryllium (Be) and aluminum (Al), have only one naturally occurring isotope,
while other elements, such as neon (Ne) and chlorine (Cl), have two or more.
The relative amount of each different isotope in a naturally occurring sample of a
given element is roughly constant. For example, in any natural sample of neon atoms,
90.48% of them are the isotope with 10 neutrons, 0.27% are the isotope with 11 neutrons, and 9.25% are the isotope with 12 neutrons. These percentages are the natural
abundance of the isotopes. Each element has its own characteristic natural abundance
of isotopes. However, advances in mass spectrometry (see Section 2.8) have allowed
accurate measurements that reveal small but significant variations in the natural abundance of isotopes for many elements.
The sum of the number of neutrons and protons in an atom is its mass number.
We represent mass number with the symbol A.
A = number of protons 1p2 + number of neutrons 1n2
For neon, with 10 protons, the mass numbers of the three different naturally occurring
isotopes are 20, 21, and 22, corresponding to 10, 11, and 12 neutrons, respectively.
We symbolize isotopes using the notation:
Mass number
A
ZX
Atomic number
▲ Element 96 is named curium,
after Marie Curie, co-discoverer of
radioactivity.
Chemical symbol
where X is the chemical symbol, A is the mass number, and Z is the atomic number.
Therefore, the symbols for the neon isotopes are:
20
10Ne
21
10Ne
22
10Ne
Notice that the chemical symbol, Ne, and the atomic number, 10, are redundant: if the
atomic number is 10, the symbol must be Ne. The mass numbers, however, are different
for the different isotopes, reflecting the different number of neutrons in each one.
A second common notation for isotopes is the chemical symbol (or chemical name)
followed by a dash and the mass number of the isotope.
Chemical symbol
or name
X-A
Mass number
In this notation, the neon isotopes are:
Ne@20
neon@20
Ne@21
neon@21
Ne@22
neon@22
We summarize the neon isotopes in the following table:
Number of
Protons
Number of
Neutrons
A (Mass
Number)
Natural
Abundance (%)
Ne@20 or 20
10Ne
10
10
20
90.48
Ne@21 or 21
10Ne
10
11
21
0.27
Ne@22 or 22
10Ne
10
12
22
9.25
Symbol
Notice that all isotopes of a given element have the same number of protons
(otherwise they would be different elements). Notice also that the mass number is
the sum of the number of protons and the number of neutrons. The number of neutrons in an isotope is therefore the difference between the mass number and the
atomic number (A–Z ). The different isotopes of an element generally exhibit the
same chemical behavior—the three isotopes of neon, for example, all exhibit chemical inertness.
M02_TRO8902_05_GE_C02.indd 104
09/08/20 20:43
2.6
Subatomic Particles: Protons, Neutrons, and Electrons in Atoms
2.6
MASS NUMBER AND ATOMIC NUMBER An argon isotope has
Cc
a mass number of 40 (A = 40). How many neutrons does it contain?
(a) 40
(b) 18
(c) 22
105
ANSWER NOW!
Conceptual
Connection
WATCH NOW!
INTERACTIVE WORKED EXAMPLE 2.3
EXAMPLE 2.3 Atomic Numbers, Mass Numbers, and Isotope Symbols
(a) What are the atomic number (Z), mass number (A), and symbol of the chlorine isotope with 18 neutrons?
(b) How many protons, electrons, and neutrons are present in an atom of 52
24Cr?
SOLUTION
(a) Look up the atomic number (Z) for chlorine on the periodic table.
The atomic number specifies the number of protons.
Z = 17, so chlorine has 17 protons.
The mass number (A) for an isotope is the sum of the number of
protons and the number of neutrons.
A = number of protons + number of neutrons
= 17 + 18 = 35
The symbol for an isotope is its chemical symbol with the atomic
number (Z) in the lower left corner and the mass number (A) in the
upper left corner.
35
17Cl
(b) For any isotope (in this case 52
24Cr) the atomic number located at the
lower left indicates the number of protons. Since this is a neutral
atom, the number of electrons equals the number of protons.
The number of neutrons is equal to the mass number (upper left)
minus the atomic number (lower left).
Number of protons = Z = 24
Number of electrons = 24 (neutral atom)
Number of neutrons = 52 - 24 = 28
FOR PRACTICE 2.3
(a)
(a) What are the atomic number, mass number, and symbol for the carbon isotope with seven neutrons?
(b) How many protons and neutrons are present in an atom of 39
19K?
(b)
(a)has two naturally occurring
ISOTOPES Carbon
isotopes: C-12 (natural abundance is 98.93%) and C-13 (natural abundance is 1.07%). If circles represent protons
and squares represent neutrons, which image best represents the C-13 isotope?
2.7
Cc
ANSWER NOW!
Conceptual
Connection
(a)
(b)
(c)
Ions: Losing and
(c) Gaining Electrons
(b)
The number of electrons in a neutral atom is equal to the number of protons in its
nucleus (designated by its atomic number Z). During chemical changes, however, atoms
can lose or gain electrons and become charged particles called ions. For example, neutral lithium (Li) atoms contain three protons and three electrons; however, in many
chemical reactions lithium atoms lose one electron 1e- 2 to form Li + ions.
(c)
Li ¡ Li + + 1e The charge of an ion is indicated in the upper right corner of the chemical symbol. Since
the Li + ion contains three protons and only two electrons, its charge is 1+ (ion charges
are written as the magnitude first followed by the sign of the charge; for a charge of 1+,
the 1 is usually dropped and the charge is written as simply +).
M02_TRO8902_05_GE_C02.indd 105
09/08/20 20:43
106
CHAPTER 2 Atoms and Elements
Ions can also be negatively charged. For example, neutral fluorine (F) atoms contain
nine protons and nine electrons; however, in many chemical reactions fluorine atoms
gain one electron to form F - ions.
F + 1e- ¡ F The F - ion contains 9 protons and 10 electrons, resulting in a charge of 1- (written simply as -). For many elements, such as lithium and fluorine, the ion is much more common than the neutral atom. In fact, lithium and fluorine occur in nature mostly as ions.
Positively charged ions, such as Li+ , are cations, and negatively charged ions, such
as F , are anions. Ions behave quite differently than their corresponding atoms. Neutral
sodium atoms, for example, are extremely unstable, reacting violently with most things
they contact. Sodium cations 1Na+ 2, by contrast, are relatively inert—we eat them all
the time in sodium chloride (table salt). In ordinary matter, cations and anions always
occur together, so that matter is charge neutral overall.
A useful mnemonic device is,
“a negative ion is an anion.”
ANSWER NOW!
2.8
Cc
Conceptual
Connection
IONS How many electrons are present in the O2- anion?
(a) 6
(b) 8
(c) 10
CHEMISTRY IN YOUR DAY | Where Did Elements Come From?
W
e find ourselves on a planet containing many different kinds of elements. If it were otherwise, we would not exist and would not be
here to reflect on why. Where did these elements come from? The
story of element formation is as old as the universe itself, and we have to go
back to the very beginning to tell the story.
The birth of the universe is described by the Big Bang theory, which
asserts that the universe began as a hot, dense collection of matter and
energy that expanded rapidly. As it expanded, it cooled, and within the first
several minutes, subatomic particles formed the first atomic nuclei:
hydrogen and helium. These two elements were (and continue to be) the
most abundant in the universe. As the universe continued expanding, some
of the hydrogen and helium clumped together under the influence of gravity
to form nebulae (clouds of gas) that eventually gave birth to stars and
galaxies. These stars and galaxies became the nurseries where all other
elements formed.
Stars are fueled by nuclear fusion, which we will discuss in more detail in
Chapter 21. Under the conditions within the core of a star, hydrogen nuclei
can combine (or fuse) to form helium. Fusion gives off enormous quantities
of energy, which is why stars emit so much heat and light. The fusion of
hydrogen to helium can fuel a star for billions of years.
After it burns through large quantities of hydrogen, if a star is large
enough, the helium that builds up in its core can in turn fuse to form carbon.
The carbon then builds up in the core and (again, if the star is large enough)
can fuse to form even heavier elements. The fusion process ends with iron,
which has a highly stable nucleus. By the time iron is formed, however, the
star is near the end of its existence and may enter a phase of expansion,
transforming into a supernova. Within a supernova, which is in essence a
large exploding star, a shower of neutrons allows the lighter elements (which
formed during the lifetime of the star through the fusion processes just
described) to capture extra neutrons. These neutrons can transform into
protons (through processes that we discuss in Chapter 21), contributing
ultimately to the formation of elements heavier than iron, all the way up to
uranium. As the supernova continues to expand, the elements present within
it are blown out into space, where they can incorporate into other nebulae
and perhaps even eventually form planets that orbit stars like our own sun.
M02_TRO8902_05_GE_C02.indd 106
▲ Stars are born in nebulae such as the Eagle
Nebula (also known as M16). This image was taken by
the Hubble Space Telescope and shows a gaseous
pillar in a star-forming region of the Eagle Nebula.
09/08/20 20:43
2.7
2.9
THE NUCLEAR ATOM, ISOTOPES, AND IONS In light of the
Cc
nuclear model for the atom, which statement is true?
(a) For a given element, the size of an isotope with more neutrons is larger than one
with fewer neutrons.
(b) For a given element, the size of an atom is the same for all of the element’s isotopes.
Finding Patterns: The Periodic Law and
the Periodic Table
2.7
107
Finding Patterns: The Periodic Law and the Periodic Table
ANSWER NOW!
Conceptual
Connection
WATCH NOW!
KEY CONCEPT VIDEO 2.7
The Periodic Law and the
Periodic Table
The modern periodic table grew out of the work of Dmitri Mendeleev
(1834–1907), a nineteenth-century Russian chemistry professor. In his time, scientists had
discovered about 65 different elements, and chemists had identified many of the properties
of these elements—such as their relative masses, their chemical activity, and some of their
physical properties. However, no one had developed any systematic way of organizing them.
Time of Discovery
H
He
hydrogen
helium
Li
Be
lithium
beryllium
Before 1800
1800–1849
1900–1949
1950–2012
1850–1899
B
C
N
O
F
Ne
boron
carbon
nitrogen
oxygen
fluorine
neon
Na
Mg
Al
Si
P
S
Cl
Ar
sodium
magnesium
aluminum
silicon
phosphorus
sulfur
chlorine
argon
K
Ca
Sc
Ti
potassium
calcium
scandium
titanium
Rb
Sr
rubidium strontium
V
Cr
Mn
vanadium chromium manganese
Y
Zr
yttrium
zirconium
Nb
Mo
Tc
Fe
Co
Ni
Cu
Zn
Ga
Ge
As
Se
Br
Kr
iron
cobalt
nickel
copper
zinc
gallium
germanium
arsenic
selenium
bromine
krypton
Rh
Pd
Sb
Te
Ru
niobium molybdenum technetium ruthenium
rhodium palladium
Ag
Cd
In
Sn
silver
cadmium
indium
tin
Cs
Ba
La
Hf
Ta
W
Re
Os
Ir
Pt
Au
Hg
Tl
Pb
cesium
barium
lanthanum
hafnium
tantalum
tungsten
rhenium
osmium
iridium
platinum
gold
mercury
thallium
lead
Rf
Db
Sg
Hs
Mt
Ds
Rg
Cn
Fr
Ra
Ac
francium
radium
actinium
Bh
rutherfordium dubnium seaborgium
bohrium
Ce
Nd
cerium
Pr
hassium meitnerium darmstadtium roentgenium copernicium
Pm
Sm
Eu
Gd
Pa
Th
U
Np
Pu
Am
Fl
flerovium
Dy
Ho
Tb
praseodymium neodymium promethium samarium europium gadolinium
thorium protactinium uranium neptunium plutonium americium
Nh
nihonium
Cm
curium
terbium
dysprosium holmium
Bk
Cf
Bi
Po
bismuth polonium
Mc
Lv
I
Xe
iodine
xenon
At
Rn
astatine
radon
Tn
Og
moscovium livermorium tennessine
oganesson
Er
Tm
Yb
Lu
erbium
thulium
ytterbium
lutetium
Fm
Md
No
Lr
berkelium californium einsteinium fermium mendelevium nobelium lawrencium
In 1869, Mendeleev noticed that certain groups of elements had similar properties.
He also found that when he listed elements in order of increasing mass, these similar
properties recurred in a periodic pattern (Figure 2.9▼). Mendeleev summarized these
observations in the periodic law:
When the elements are arranged in order of increasing mass,
certain sets of properties recur periodically.
Mendeleev organized the known elements in a table consisting of a series of rows in
which mass increases from left to right. He arranged the rows so that elements with similar properties fall in the same vertical columns (Figure 2.10▶).
The Periodic Law
▲ Many of the elements that we
know today were discovered during
Mendeleev’s lifetime.
To be periodic means to exhibit a
repeating pattern.
◀ FIGURE 2.9 Recurring
Properties
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
H
He
Li
Be
B
C
N
O
F
Ne
Na
Mg
Al
Si
P
S
Cl
Ar
K
Ca
Elements with similar properties recur in a regular pattern.
M02_TRO8902_05_GE_C02.indd 107
Es
antimony tellurium
These elements are
listed in order of increasing atomic
number. Elements with similar
properties are represented with the
same color. Notice that the colors
form a repeating pattern, much
like musical notes form a repeating
pattern on a piano keyboard.
09/08/20 20:43
108
CHAPTER 2 Atoms and Elements
A Simple Periodic Table
Elements with similar properties
fall into columns.
1
2
H
3
He
4
5
6
7
8
9
10
Li
Be
B
C
N
O
F
Ne
11
12
13
14
15
16
17
18
19
20
Since many elements had not yet been discovered, Mendeleev’s table contained
some gaps, which allowed him to predict the existence (and even the properties) of yet
undiscovered elements. For example, Mendeleev predicted the existence of an element
he called eka-silicon, which fell below silicon on the table and between gallium and arsenic (eka means the one beyond). In 1886, eka-silicon was discovered by German chemist
Clemens Winkler (1838–1904), who named it germanium, after his home country.
Modern Periodic Table Organization
Mendeleev’s original listing evolved into the modern periodic table shown in
Figure 2.11▶. In the modern table, elements are listed in order of increasing atomic
K Ca
number rather than increasing relative mass. The modern periodic table also contains
more elements than Mendeleev’s original table because more have been discovered
since his time. Mendeleev’s periodic law was based on observation. Like all scientific
▲ FIGURE 2.10 Making a Periodic
Table We can arrange the elements in
laws, the periodic law summarizes many observations but does not give the underlyFigure 2.9 in a table in which atomic number
ing reason for the observations—only theories do that. For now, we accept the periincreases from left to right and elements
odic law as it is, but in Chapters 8 and 9 we will examine a powerful theory—called
with similar properties (as represented by the
quantum mechanics—that explains the law and gives the underlying reasons for it.
different colors) are aligned in columns.
We can broadly classify the elements in the periodic table as metals, nonmetals, or
metalloids, as shown in Figure 2.11. Metals lie on the lower left side and middle of
the periodic table and share some common properties: they are good conductors of heat
and electricity, they can be pounded into flat sheets (malleability), they can be drawn into
wires (ductility), they are often shiny, and they tend to lose electrons when they undergo
chemical changes. Chromium, copper, strontium, gold, and lead are typical metals.
Nonmetals lie on the upper right side of the periodic table. The dividing line
between metals and nonmetals is the zigzag diagonal line running from boron to astatine. Nonmetals have varied properties—some are solids at room temperature, others are
liquids or gases—but typically they tend to be poor conductors of heat and electricity,
and they all tend to gain electrons when they undergo chemical changes. Oxygen,
▲ Dmitri Mendeleev, a Russian
carbon, sulfur, bromine, and iodine are nonmetals.
chemistry professor who proposed
Many of the elements that lie along the zigzag diagonal line that divides metals and
the periodic law and arranged early
nonmetals are metalloids and exhibit mixed properties. Several metalloids are also
versions of the periodic table, was
honored on a Soviet postage stamp.
classified as semiconductors because of their intermediate (and highly temperaturedependent) electrical conductivity. Our ability to change and control the conductivity
of semiconductors makes them useful to us in the manufacture of the electronic chips
Metalloids are sometimes called
semimetals.
and circuits central to computers, cellular telephones, and many other modern devices.
Good examples of metalloids are silicon, arsenic, and antimony.
We can also divide the periodic table, as shown in Figure 2.12▶, into main-group
elements, whose properties tend to be largely predictable based on their position in the
periodic table, and transition elements or transition metals, whose properties
tend to be less predictable based simply on their position in the periodic table. Maingroup elements are in columns labeled with a number and the letter A. Transition eleAlkali metals
ments are in columns labeled with a number and the letter B. An alternative numbering
system does not use letters, but only the numbers 1–18. Both numbering systems are
shown in most of the periodic tables in this book. Each column within the main-group
Li
regions of the periodic table is a family or group of elements.
The elements within a group usually have similar properties. For example, the group
8A elements, called the noble gases, are mostly unreactive. The most familiar noble gas
Na
is probably helium, used to fill buoyant balloons. Helium is chemically stable—it does
not combine with other elements to form compounds—and is therefore safe to put into
balloons. Other noble gases are neon (often used in electronic signs), argon (a small
K
component of our atmosphere), krypton, and xenon.
The group 1A elements, the alkali metals, are all reactive metals. A marble-sized
piece
of sodium explodes violently when dropped into water. Lithium, potassium, and
Rb
rubidium are also alkali metals.
The group 2A elements, the alkaline earth metals, are also fairly reactive, although
not quite as reactive as the alkali metals. Calcium, for example, reacts fairly vigorously when
Cs
dropped into water but does not explode as dramatically as sodium. Other alkaline earth metals include magnesium (a common low-density structural metal), strontium, and barium.
Na Mg
Al
Si
M02_TRO8902_05_GE_C02.indd 108
P
S
Cl
Ar
09/08/20 20:43
2.7
109
Finding Patterns: The Periodic Law and the Periodic Table
Major Divisions of the Periodic Table
Carbon
Silicon
Metals
1
1A
1
1
H
Metalloids
Strontium Chromium
2A
2
4
Be
12
Mg
20
Ca
38
Sr
56
Ba
88
Ra
3
Li
3 11
Na
4 19
K
37
5
Rb
55
6
Cs
87
7
Fr
2
3B
3
21
Sc
39
Y
57
La
89
Ac
4B
4
22
Ti
40
Zr
72
Hf
104
Rf
Lanthanides
Actinides
Arsenic
Nonmetals
Gold
Copper
4A
14
6
C
14
Si
32
Ge
50
Sn
82
Pb
114
Fl
5A
15
7
N
15
P
33
As
51
Sb
83
Bi
115
Mc
6A
16
8
O
16
S
34
Se
52
Te
84
Po
116
Lv
7A
17
9
F
17
Cl
35
Br
53
I
85
At
117
Ts
8A
18
2
He
10
Ne
18
Ar
36
Kr
54
Xe
86
Rn
118
Og
67
Ho
99
Es
68
Er
100
Fm
69
Tm
101
Md
70
Yb
102
No
71
Lu
103
Lr
Lead
5B
5
23
V
41
Nb
73
Ta
105
Db
6B
6
24
Cr
42
Mo
74
W
106
Sg
7B
7
25
Mn
43
Tc
75
Re
107
Bh
8
26
Fe
44
Ru
76
Os
108
Hs
8B
9
27
Co
45
Rh
77
Ir
109
Mt
10
28
Ni
46
Pd
78
Pt
110
Ds
1B
11
29
Cu
47
Ag
79
Au
111
Rg
2B
12
30
Zn
48
Cd
80
Hg
112
Cn
3A
13
5
B
13
Al
31
Ga
49
In
81
Tl
113
Nh
58
Ce
90
Th
59
Pr
91
Pa
60
Nd
92
U
61
Pm
93
Np
62
Sm
94
Pu
63
Eu
95
Am
64
Gd
96
Cm
65
Tb
97
Bk
66
Dy
98
Cf
Sulfur
Bromine
Iodine
▲ FIGURE 2.11 Metals, Nonmetals, and Metalloids The elements in the periodic table
fall into these three broad classes.
Main-group
elements
Periods
1
Transition
elements
Main-group
elements
1A Group
1 number
1
2A
H
2
8A
18
6A
16
7A
17
2
He
6
C
5A
15
7
N
8
O
9
F
10
Ne
3A
13
5
B
4A
14
2
3
Li
4
Be
3
11
Na
12
Mg
3B
3
4B
4
5B
5
6B
6
7B
7
8
8B
9
10
1B
11
2B
12
13
Al
14
Si
15
P
16
S
17
Cl
18
Ar
4
19
K
20
Ca
21
Sc
22
Ti
23
V
24
Cr
25
Mn
26
Fe
27
Co
28
Ni
29
Cu
30
Zn
31
Ga
32
Ge
33
As
34
Se
35
Br
36
Kr
5
37
Rb
38
Sr
39
Y
40
Zr
41
Nb
42
Mo
43
Tc
44
Ru
45
Rh
46
Pd
47
Ag
48
Cd
49
In
50
Sn
51
Sb
52
Te
53
I
54
Xe
6
55
Cs
56
Ba
57
La
72
Hf
73
Ta
74
W
75
Re
76
Os
77
Ir
78
Pt
79
Au
80
Hg
81
Tl
82
Pb
83
Bi
84
Po
85
At
86
Rn
7
87
Fr
88
Ra
89
Ac
104
Rf
105
Db
106
Sg
107
Bh
108
Hs
109
Mt
110
Ds
111
Rg
112
Cn
113
Nh
114
Fl
115
Mc
116
Lv
117
Ts
118
Og
▲ FIGURE 2.12 The Periodic Table: Main-Group and Transition Elements The elements
in the periodic table fall into columns. The two columns at the left and the six columns at the
right comprise the main-group elements. Each of these eight columns is a group or family. The
properties of main-group elements can generally be predicted from their position in the periodic
table. The properties of the elements in the middle of the table, known as transition elements, are
less predictable.
M02_TRO8902_05_GE_C02.indd 109
09/08/20 20:43
110
CHAPTER 2 Atoms and Elements
The group 7A elements, the halogens, are very reactive nonmetals. One of the
most familiar halogens is chlorine, a greenish-yellow gas with a pungent odor. Because
of its reactivity, chlorine is used as a sterilizing and disinfecting agent. Other halogens
include bromine, a red-brown liquid that easily evaporates into a gas; iodine, a purple
solid; and fluorine, a pale-yellow gas.
ANSWER NOW!
2.10
Cc
PERIODIC TABLE Which terms best apply to lead (Pb)?
(a) Transition element; metal
(c) Halogen; nonmetal
Conceptual
Connection
Ions and the Periodic Table
Halogens
In chemical reactions, metals tend to lose electrons (forming cations) and nonmetals
tend to gain them (forming anions). The number of electrons lost or gained, and therefore the charge of the resulting ion, is often predictable for a given element, especially
main-group elements. Main-group elements tend to form ions that have the same number of electrons as the nearest noble gas (i.e., the noble gas that has the number of electrons closest to that of the element).
F
Cl
Br
■
A main-group metal tends to lose electrons, forming a cation with the
same number of electrons as the nearest noble gas.
■
A main-group nonmetal tends to gain electrons, forming an anion with
the same number of electrons as the nearest noble gas.
For example, lithium, a metal with three electrons, tends to lose one electron, forming a
1+ cation that has the same number of electrons (two) as helium. Chlorine, a nonmetal
with 17 electrons, tends to gain one electron, forming a 1- anion that has the same
number of electrons (18) as argon.
In general, the alkali metals (group 1A) tend to lose one electron and form 1+ ions. The
alkaline earth metals (group 2A) tend to lose two electrons and form 2+ ions. The halogens
(group 7A) tend to gain one electron and form 1- ions. The oxygen family nonmetals
(group 6A) tend to gain two electrons and form 2- ions. More generally, for the main-group
elements that form cations with predictable charge, the charge is equal to the group number. For main-group elements that form anions with predictable charge, the charge is equal
to the group number minus eight. Transition elements may form various different ions
with different charges. Figure 2.13▶ shows the ions formed by the main-group elements
that form ions with predictable charges. In Chapters 8 and 9, we will introduce quantummechanical theory, which more fully explains why these groups form ions as they do.
I
At
EXAMPLE 2.4
(b) Main-group element; nonmetal
(d) Main-group element; metal
Predicting the Charge of Ions
Predict the charges of the monoatomic (single atom) ions formed by these main-group elements.
(a) Al
(b) S
SOLUTION
(a) Aluminum is a main-group metal and tends to lose electrons to form a cation with the same number of electrons as
the nearest noble gas. Aluminum atoms have 13 electrons and the nearest noble gas is neon, which has 10 electrons.
Aluminum therefore loses three electrons to form a cation with a 3 + charge (Al3 + ).
(b) Sulfur is a nonmetal and tends to gain electrons to form an anion with the same number of electrons as the nearest
noble gas. Sulfur atoms have 16 electrons and the nearest noble gas is argon, which has 18 electrons. Sulfur therefore
gains two electrons to form an anion with a 2 - charge (S2 - ).
FOR PRACTICE 2.4
(a) N
M02_TRO8902_05_GE_C02.indd 110
Predict the charges of the monoatomic ions formed by these main-group elements.
(b) Rb
09/08/20 20:43
2.8
Atomic Mass: The Average Mass of an Element’s Atoms
111
Elements That Form Ions with Predictable Charges
1A
7A
H+
H-
2A
3A
Li+
Transition metals
Na+ Mg2+
Al3+
4A
5A
6A
N3-
O2 -
F-
P3-
S2-
Cl-
K+
Ca2+
Se2-
Br-
Rb+
Sr2+
Te2-
I-
Cs+ Ba2+
8A
N
o
b
l
e
G
a
s
e
s
▲ FIGURE 2.13 Elements That Form Ions with Predictable Charges
CHEMISTRY AND MEDICINE | The Elements of Life
W
hat kind of atoms compose us? In terms of mass, our
bodies are 65% oxygen (because of the large
amount of water), 18% carbon, and 10% hydrogen,
with a few other elements present in smaller quantities, as
shown in Figure 2.14▶ and Table 2.2. Because the atoms of
different elements have different masses (more on this in
Sections 2.8 and 2.9), if we consider number of atoms (instead
of mass), hydrogen comes in first (because hydrogen atoms
are so light), with oxygen second and carbon third.
Oxygen: 65%
Nitrogen: 3%
Calcium: 1.5%
Phosphorus: 1%
Other: 1.5%
TABLE 2.2 ■ Approximate Percent Elemental
Composition of Humans
Element
% by Mass
% by Number of Atoms
Oxygen
65
26.4
Carbon
18
9.2
Hydrogen
10
62.3
Nitrogen
3
1.4
Calcium
1.5
0.2
Phosphorus
1
0.3
Other
1.5
0.2
2.8
▲ FIGURE 2.14 Elemental Composition of Humans
(by Mass)
Much of the chemistry of life revolves not around oxygen or
hydrogen but around carbon, an element that forms a disproportionately large number of compounds with a few other elements
such as hydrogen, oxygen, and nitrogen. We will explore the
chemistry of carbon—called organic chemistry—briefly in
Chapter 3 and in more detail in Chapter 22.
Atomic Mass: The Average Mass
of an Element’s Atoms
An important part of Dalton’s atomic theory is that all atoms of a given element have the same mass. In Section 2.6, we learned that because of isotopes, the atoms
of a given element often have different masses, so Dalton was not completely correct. We
can, however, calculate an average mass—called the atomic mass—for each element.
The atomic mass of each element is listed directly beneath the element’s symbol in
the periodic table and represents the average mass of the isotopes that compose that element, weighted according to the natural abundance of each isotope. For example, the periodic table lists the atomic mass of chlorine as 35.45 amu. Naturally occurring chlorine
M02_TRO8902_05_GE_C02.indd 111
Carbon: 18%
Hydrogen:
10%
Atomic mass is sometimes called
atomic weight or standard atomic
weight.
09/08/20 20:43
112
CHAPTER 2 Atoms and Elements
consists of 75.77% chlorine-35 atoms (mass 34.97 amu) and 24.23% chlorine-37 atoms
(mass 36.97 amu). We can calculate its atomic mass accordingly:
17
Cl
Atomic mass = 0 .7577134.97 amu2 + 0.2423(36.97 amu) = 35.45 amu
35.45
chlorine
In this book, we use the atomic
masses recommended by the
International Union of Pure and
Applied Chemistry (IUPAC) for users
needing an atomic mass value for
an unspecified sample. Detailed
studies of the atomic masses of
many samples, however, have shown
that atomic masses are not constants
of nature because the exact isotopic
abundances in any given sample
depend on the history of the sample
(see the Chemistry in Your Day box
later in this section).
When we use percentages in
calculations, we convert them to their
decimal value by dividing by 100.
Notice that the atomic mass of chlorine is closer to 35 than 37. Naturally occurring chlorine contains more chlorine-35 atoms than chlorine-37 atoms, so the weighted average
mass of chlorine is closer to 35 amu than to 37 amu.
In general, we calculate the atomic mass as follows:
Atomic mass = 1fraction of isotope 1 * mass of isotope 12
+ 1fraction of isotope 2 * mass of isotope 22
+ 1fraction of isotope 3 * mass of isotope 32 + ...
This expression can be written more simply with the equation:
Atomic mass = a (fraction of isotope n) * (mass of isotope n)
n
where the fractions of each isotope are the percent natural abundances converted to
their decimal values. The concept of atomic mass is useful because it allows us to assign
a characteristic mass to each element, and, as we will see shortly, it allows us to quantify
the number of atoms in a sample of that element.
WATCH NOW!
INTERACTIVE WORKED EXAMPLE 2.5
EXAMPLE 2.5
Atomic Mass
Copper has two naturally occurring isotopes: Cu-63 with a mass of 62.9291 amu and a natural abundance of 69.17%,
and Cu-65 with a mass of 64.9278 amu and a natural abundance of 30.83%. Calculate the atomic mass of copper.
SOLUTION
69.17
= 0.6917
100
30.83
Fraction Cu@65 =
= 0.3083
100
Convert the percent natural abundances
into decimal form by dividing by 100.
Fraction Cu@63 =
Calculate the atomic mass using the
equation given in the text.
Atomic mass = 0.6917(62.9296 amu) + 0.3083(64.9278 amu)
= 43.5284 amu + 20.0172 amu = 63.5456 = 63.55 amu
FOR PRACTICE 2.5 Magnesium has three naturally occurring isotopes with masses of 23.99 amu, 24.99 amu, and
25.98 amu and natural abundances of 78.99%, 10.00%, and 11.01%, respectively. Calculate the atomic mass of magnesium.
FOR MORE PRACTICE 2.5 Gallium has two naturally occurring isotopes: Ga-69 with a mass of 68.9256 amu and a
natural abundance of 60.11%, and Ga-71. Use the atomic mass of gallium from the periodic table to find the mass of Ga-71.
ANSWER NOW!
2.11
Cc
Conceptual
Connection
ATOMIC MASS Recall from Conceptual Connection 2.7 that carbon has two
naturally occurring isotopes: C-12 (natural abundance is 98.93%; mass is 12.0000 amu)
and C-13 (natural abundance is 1.07%; mass is 13.0034 amu). Without doing any calculations, determine which mass is closest to the atomic mass of carbon.
(a) 12.00 amu
(b) 12.50 amu
(c) 13.00 amu
Mass Spectrometry: Measuring the Mass of
Atoms and Molecules
The masses of atoms and the percent abundances of isotopes of elements are measured
using mass spectrometry, a technique that separates particles according to their mass.
In a mass spectrometer, such as the one in Figure 2.15▶, the sample (containing the
M02_TRO8902_05_GE_C02.indd 112
09/08/20 20:43
2.8
Atomic Mass: The Average Mass of an Element’s Atoms
113
Mass Spectrometer
A sample
is injected.
The heater
vaporizes the
sample.
The electron beam
ionizes the sample.
The electric field
accelerates the
particles.
The magnetic field
separates the particles.
An electrical signal is
produced when ions
strike the detector.
Lightest
particles
Detector
Sample
Heaviest
particles
Beam of
charged particles
Electrically
charged plates
Magnets
▲FIGURE 2.15 The Mass
Intensity %
100%
Ag-107
Ag-109
50%
107 109
Mass (amu)
The two peaks correspond to the two isotopes of silver. We can determine the percent
abundance of each isotope from the intensity of each line. However, the total intensity
must be normalized—it must be made to equal 100%. We can accomplish this by dividing the intensity of each peak by the total intensity:
Abundance of Ag@107 =
100.0%
* 100% = 51.84%
100.0% + 92.90%
Abundance of Ag@109 =
92.90%
* 100% = 48.16%
100.0% + 92.90%
Spectrometer
Atoms are
converted to positively charged ions,
accelerated, and passed through a
magnetic field that deflects their path.
The heaviest ions undergo the least
deflection.
100%
Intensity %
atoms whose mass is to be measured) is injected into the instrument and vaporized. The
vaporized atoms are ionized by an electron beam—the electrons in the beam collide with
the atoms, removing electrons and creating positively charged ions. The ions are then
accelerated into a magnetic field. When ions drift through a magnetic field, they experience a force that bends their trajectory. The amount of bending depends on the mass of
the ions—the trajectories of lighter ions are bent more than those of heavier ones.
In the right side of the spectrometer in Figure 2.15▲, you can see three different paths,
each corresponding to ions of different mass. Finally, the ions strike a detector and produce an electrical signal that is recorded. The result is the separation of the ions according
to their mass, producing a mass spectrum such as the one in Figure 2.16▶. The position of
each peak on the x-axis indicates the mass of the isotope that was ionized, and the intensity
(indicated by the height of the peak) indicates the relative abundance of that isotope.
The mass spectrum of an elemental sample can be used to determine the atomic
mass of that sample of the element. For example, consider the mass spectrum of a naturally occurring sample of silver:
50%
Cl-35
Cl-37
35 37
Mass (amu)
▲FIGURE 2.16 The Mass
Spectrum of Chlorine The position
of each peak on the x-axis indicates
the mass of the isotope. The intensity
(or height) of the peak indicates the
relative abundance of the isotope. The
intensity of the highest peak is usually
set to 100%, and the intensity of all
other peaks is reported relative to the
most intense one.
Then we can calculate the atomic mass of silver:
Ag atomic mass = 0.5184(106.905 amu) + 0.4816(108.904 amu)
= 55.4195 amu + 52.4482 amu = 107.8677 = 107.87 amu
Mass spectrometry can also be used on molecules. Because molecules often fragment (break apart) during ionization, the mass spectrum of a molecule usually contains
many peaks representing the masses of different parts of the molecule, as well as a peak
M02_TRO8902_05_GE_C02.indd 113
09/08/20 20:43
114
CHAPTER 2 Atoms and Elements
CHEMISTRY IN YOUR DAY | Evolving Atomic Masses
A
t the beginning of 2011, IUPAC published a new periodic
table with atomic masses that looked different from previous IUPAC periodic tables. For the first time, instead of
listing a single atomic mass for each element, IUPAC listed upper
and lower bounds for the atomic masses of several elements (see
the periodic table in this box). For example, previous IUPAC periodic tables reported the atomic mass of O (rounded to four significant figures) as 16.00. However, the new periodic table reports
the atomic mass as [15.99, 16.00] denoting the upper and lower
bounds for the possible atomic masses of terrestrial oxygen.
Why did this happen? The changes were necessary because
developments in mass spectrometry have increasingly
demonstrated that the atomic masses of several elements are
not constant from one sample to another because the isotopic
composition is not constant from one sample to another. In other
words, the isotopic composition of a sample of a given element
can vary depending on the source of the sample. For example,
the lower bound for the atomic mass of oxygen (15.99 amu)
comes from measurements of oxygen from Antarctic
precipitation, and the upper bound (16.00 amu) comes from
measurements of oxygen in marine N2O (dinitrogen monoxide).
Although we have long treated atomic masses as constants of
nature, they are not, and the new periodic table reflects this fact.
So what do we do if we need an atomic mass for an element
of unknown or unspecified origin? IUPAC has recommended
values that apply to most samples found on Earth. The values
are rounded so that atomic mass variations in samples found on
Earth are plus or minus one in the last digit (just like accepted
significant figure conventions). These values are adopted
throughout all of the periodic tables in this book except the one
shown below, which displays the upper and lower bounds for
those elements in which variation occurs. For further reading,
see IUPAC. Pure Appl. Chem. 2011, 83(2), 359–396.
representing the mass of the molecule as a whole. The fragments that form upon ionization, and therefore the corresponding peaks that appear in the mass spectrum, are specific to the molecule, so a mass spectrum is like a molecular fingerprint. Mass
spectroscopy can be used to identify an unknown molecule and to determine how much
of it is present in a particular sample. For example, mass spectrometry has been used to
detect organic (carbon-containing) compounds present in meteorites, a puzzling observation that some scientists speculate may be evidence of life outside of our planet.
M02_TRO8902_05_GE_C02.indd 114
09/08/20 20:43
2.9 Molar Mass: Counting Atoms by Weighing Them
115
Most scientists think that the carbon compounds in meteorites probably formed in the
same way as the first organic molecules on Earth, indicating that the formation of
organic molecules may be common in the universe.
Since the early 1990s, researchers have also successfully applied mass spectrometry to biological molecules, including proteins (the workhorse molecules in cells)
and nucleic acids (the molecules that carry genetic information). For a long time,
these molecules could not be analyzed by mass spectrometry because they were difficult to vaporize and ionize without being destroyed, but modern techniques have
overcome this problem. A tumor, for example, can now be instantly analyzed by mass
spectrometry to determine whether it contains specific proteins associated with
cancer.
2.9
Molar Mass: Counting Atoms
by Weighing Them
WATCH NOW!
KEY CONCEPT VIDEO 2.9
The Mole Concept
Shrimp are normally sold by count, which indicates the number of shrimp
per pound. For example, 41–50 count shrimp means that there are between 41 and 50
shrimp per pound. The smaller the count, the larger the shrimp. Big tiger prawns have
counts as low as 10–15, which means that each shrimp can weigh up to 1/10 of a pound.
One advantage of categorizing shrimp in this way is that we can count the shrimp by
weighing them. For example, two pounds of 41–50 count shrimp contains between 82
and 100 shrimp.
A similar (but more precise) concept exists for atoms. Counting atoms is much more
difficult than counting shrimp, yet as chemists we often need to know the number of
atoms in a sample of a given mass. Why? Because chemical processes happen between particles. For elements, those particles are atoms. For example, when hydrogen and oxygen
combine to form water, two hydrogen atoms combine with one oxygen atom to form
one water molecule. If we want to know how much hydrogen to react with a given mass
of oxygen to form water, we need to know the number of atoms in the given mass of
oxygen. We also need to know the mass of hydrogen that contains exactly twice that
number of atoms.
As another example, consider intravenous fluids—fluids that are delivered to patients
by directly dripping them into veins. These fluids are saline (sodium chloride) solutions
that must have a specific number of sodium and chloride ions per liter of fluid. The number of particles in the fluid directly influences the properties of the fluid. Administering an
intravenous fluid with the wrong number of sodium and chloride ions could be fatal.
Atoms are far too small to count by any ordinary means. As we noted earlier, even if
you could somehow count atoms, and counted them 24 hours a day for as long as you
lived, you would barely begin to count the number of atoms in something as small as a
sand grain. Therefore, if we want to know the number of atoms in anything of ordinary
size, we count them by weighing.
The Mole: A Chemist’s “Dozen”
When we count large numbers of objects, we often use units such as a dozen (12 objects)
or a gross (144 objects) to organize our counting and to keep our numbers more manageable. With atoms, quadrillions of which may be in a speck of dust, we need a much larger
number for this purpose. The chemist’s “dozen” is the mole (abbreviated mol). A mole
is the amount of material containing 6.02214 * 1023 particles.
1 mol = 6.02214 * 1023 particles
This number is Avogadro’s number, named after Italian physicist Amedeo Avogadro
(1776–1856), and is a convenient number to use when working with atoms, molecules,
and ions. In this book, we usually round Avogadro’s number to four significant figures
M02_TRO8902_05_GE_C02.indd 115
09/08/20 20:43
116
CHAPTER 2 Atoms and Elements
Twenty-two copper pennies contain
approximately 1 mol of copper atoms.
Before 1982, when they became
almost all zinc with only a copper
coating, pennies were mostly
copper.
One tablespoon of water contains
approximately 1 mol of water molecules.
or 6.022 * 1023. Notice that the definition of the mole is an amount of a substance. We
often refer to the number of moles of substance as the amount of the substance.
The first thing to understand about the mole is that it can specify Avogadro’s number
of anything. For example, one mole of marbles corresponds to 6.022 * 1023 marbles, and
one mole of sand grains corresponds to 6.022 * 1023 sand grains. One mole of anything is
6.022 * 1023 units of that thing. One mole of atoms, ions, or molecules, however, makes
up objects of everyday sizes. Twenty-two copper pennies, for example, contain approximately 1 mol of copper atoms, and 1 tablespoon of water contains approximately 1 mol
of water molecules.
The second, and more fundamental, thing to understand about the mole is how it
gets its specific value.
The value of the mole is equal to the number of atoms in exactly 12 g of
pure carbon-12 (12 g C = 1 mol C atoms = 6.022 * 1023 C atoms).
The definition of the mole gives us a relationship between mass (grams of carbon) and
number of atoms (Avogadro’s number). This relationship, as we will see shortly, allows
us to count atoms by weighing them.
Converting between Number of Moles
and Number of Atoms
Converting between number of moles and number of atoms is similar to converting between dozens of eggs and number of eggs. For eggs, you use the conversion factor 1 dozen eggs = 12 eggs. For atoms, you use the conversion factor 1 mol atoms =
6 .022 * 1023 atoms. The conversion factors take the following forms:
1 mol atoms
One tablespoon is approximately
15 mL; one mol of water occupies
18 mL.
EXAMPLE 2.6
6.022 * 1023 atoms
or
6.022 * 1023 atoms
1 mol atoms
Example 2.6 demonstrates how to use these conversion factors in calculations.
Converting between Number of Moles and Number of Atoms
Calculate the number of copper atoms in 2.45 mol of copper.
SORT You are given the amount of copper in moles
and asked to find the number of copper atoms.
GIVEN: 2.45 mol Cu
FIND: Cu atoms
STRATEGIZE Convert between number of moles
CONCEPTUAL PLAN
and number of atoms by using Avogadro’s number as
a conversion factor.
mol Cu
Cu atoms
6.022 : 10 23 Cu atoms
1 mol Cu
RELATIONSHIPS USED
6.022 * 1023 = 1 mol (Avogadro’s number)
SOLVE Follow the conceptual plan to solve the
problem. Begin with 2.45 mol Cu and multiply by
Avogadro’s number to get to the number of Cu atoms.
SOLUTION
2.45 mol Cu *
6.022 * 1023 Cu atoms
= 1.48 * 1024 Cu atoms
1 mol Cu
CHECK Since atoms are small, it makes sense that the answer is large. The given number of moles of copper is almost 2.5,
so the number of atoms is almost 2.5 times Avogadro’s number.
FOR PRACTICE 2.6
contain?
M02_TRO8902_05_GE_C02.indd 116
A pure silver ring contains 2.80 * 1022 silver atoms. How many moles of silver atoms does it
09/08/20 20:43
2.9 Molar Mass: Counting Atoms by Weighing Them
117
Converting between Mass and Amount
(Number of Moles)
To count atoms by weighing them, we need one other conversion factor—the mass of
1 mol of atoms. For the isotope carbon-12, we know that the mass of 1 mol of atoms is
exactly 12 g, which is numerically equivalent to carbon-12’s atomic mass in atomic mass
units. Since the masses of all other elements are defined relative to carbon-12, the same
relationship holds for all elements.
The mass of one mole of atoms of an element is its molar mass.
An element’s molar mass in grams per mole is numerically equal to
the element’s atomic mass in atomic mass units.
For example, copper has an atomic mass of 63.55 amu and a molar mass of 63.55 g/mol.
One mole of copper atoms therefore has a mass of 63.55 g. Just as the count for shrimp
depends on the size of the shrimp, so the mass of 1 mol of atoms depends on the element: 1 mol of aluminum atoms (which are lighter than copper atoms) has a mass of
26.98 g, 1 mol of carbon atoms (which are even lighter than aluminum atoms) has a
mass of 12.01 g, and 1 mol of helium atoms (lighter yet) has a mass of 4.003 g.
26.98 g aluminum = 1 mol aluminum = 6.022 : 1023 Al atoms
23
C atoms
23
He atoms
12.01 g carbon = 1 mol carbon = 6.022 : 10
4.003 g helium = 1 mol helium = 6.022 : 10
Al
C
When we say 1 mol carbon we
implicitly mean 1 mol carbon
atoms because carbon is
composed of carbon atoms.
He
The lighter the atom, the less mass in 1 mol of atoms.
1 dozen peas
1 dozen marbles
▲ The two dishes contain the same number of objects (12), but the masses are different because
peas are less massive than marbles. Similarly, a mole of light atoms will have less mass than a mole
of heavier atoms.
The molar mass of any element is the conversion factor between the mass (in grams)
of that element and the amount (in moles) of that element. For carbon:
12.01 g C = 1 mol C or
12.01 g C
1 mol C
or
1 mol C
12.01 g C
Example 2.7 demonstrates how to use these conversion factors.
M02_TRO8902_05_GE_C02.indd 117
09/08/20 20:43
118
CHAPTER 2 Atoms and Elements
EXAMPLE 2.7
Converting between Mass and Amount (Number of Moles)
Calculate the amount of carbon (in moles) contained in a 0.0265 g pencil “lead.” (Assume that the pencil lead is made of
pure graphite, a form of carbon.)
SORT You are given the mass of carbon and asked to find the
amount of carbon in moles.
GIVEN: 0.0265 g C
FIND: mol C
STRATEGIZE Convert between mass and amount (in moles)
of an element by using the molar mass of the element.
CONCEPTUAL PLAN
gC
mol C
1 mol C
12.01 g C
RELATIONSHIPS USED
12.01 g C = 1 mol C (carbon molar mass)
SOLVE Follow the conceptual plan to solve the problem.
SOLUTION
0.0265 g C *
1 mol C
= 2.21 * 10 -3 mol C
12.01 g C
CHECK The given mass of carbon is much less than the molar mass of carbon, so it makes sense that the answer (the
amount in moles) is much less than 1 mol of carbon.
FOR PRACTICE 2.7
Calculate the amount of copper (in moles) in a 35.8 g pure copper sheet.
FOR MORE PRACTICE 2.7
Calculate the mass (in grams) of 0.473 mol of titanium.
We now have all the tools to count the number of atoms in a sample of an element
by weighing it. First, we obtain the mass of the sample. Then we convert it to an amount
in moles using the element’s molar mass. Finally, we convert it to number of atoms using
Avogadro’s number. The conceptual plan for these kinds of calculations takes the following form:
g element
mol element
molar mass
of element
number of atoms
Avogadro’s
number
Examples 2.8 and 2.9 demonstrate these conversions.
WATCH NOW!
INTERACTIVE WORKED EXAMPLE 2.8
EXAMPLE 2.8
The Mole Concept—Converting between Mass and
Number of Atoms
How many copper atoms are in a copper penny with a mass of 3.10 g? (Assume that the penny is composed of
pure copper.)
SORT You are given the mass of copper and
GIVEN: 3.10 g Cu
asked to find the number of copper atoms.
FIND: Cu atoms
STRATEGIZE Convert between the mass
of an element in grams and the number of
atoms of the element by first converting
to moles (using the molar mass of the element) and then to number of atoms (using
Avogadro’s number).
CONCEPTUAL PLAN
g Cu
mol Cu
number of Cu atoms
1 mol Cu
6.022 * 1023 Cu atoms
63.55 g Cu
1 mol Cu
RELATIONSHIPS USED
63.55 g Cu = 1 mol Cu (molar mass of copper)
6.022 * 1023 = 1 mol (Avogadro’s number)
M02_TRO8902_05_GE_C02.indd 118
09/08/20 20:43
2.9 Molar Mass: Counting Atoms by Weighing Them
SOLVE Follow the conceptual plan to
solve the problem. Begin with 3.10 g Cu
and multiply by the appropriate conversion
factors to arrive at the number of Cu atoms.
119
SOLUTION
3.10 g Cu *
1 mol Cu
6.022 * 1023 Cu atoms
*
= 2.94 * 1022 Cu atoms
63.55 g Cu
1 mol Cu
CHECK The answer (the number of copper atoms) is less than 6.022 * 1023 (1 mol). This is consistent with the given mass
of copper atoms, which is less than the molar mass of copper.
FOR PRACTICE 2.8
(1 carat = 0.20 g)
How many carbon atoms are there in a 1.3-carat diamond? Diamonds are a form of pure carbon.
FOR MORE PRACTICE 2.8
Calculate the mass of 2.25 * 1022 tungsten atoms.
Notice that numbers with large exponents, such as 6.022 * 1023, are almost unbelievably large. Twenty-two copper pennies contain 6.022 * 1023 or 1 mol of copper
atoms, but 6.022 * 1023 pennies would cover Earth’s entire surface to a depth of 300 m.
Even objects small by everyday standards occupy a huge space when we have a mole of
them. For example, a grain of sand has a mass of less than 1 mg and a diameter of less
than 0.1 mm, yet 1 mol of sand grains would cover the state of Texas to a depth of several
feet. For every increase of 1 in the exponent of a number, the number increases by a factor of 10, so 10 23 is incredibly large. Of course 1 mol has to be a large number if it is to
have practical value because atoms are so small.
WATCH NOW!
INTERACTIVE WORKED EXAMPLE 2.9
EXAMPLE 2.9
The Mole Concept
An aluminum sphere contains 8.55 * 1022 aluminum atoms. What is the sphere’s radius in centimeters?
The density of aluminum is 2.70 g>cm3.
SORT You are given the number of aluminum
atoms in a sphere and the density of aluminum.
You are asked to find the radius of the sphere.
STRATEGIZE The heart of this problem is density,
which relates mass to volume; though you aren’t
given the mass directly, you are given the number of
atoms, which you can use to find mass.
1. Convert from number of atoms to number of
moles using Avogadro’s number as a conversion factor.
2. Convert from number of moles to mass using
molar mass as a conversion factor.
3. Convert from mass to volume (in cm3 ) using
density as a conversion factor.
4. Once you calculate the volume, find the
radius from the volume using the formula for
the volume of a sphere.
GIVEN: 8.55 * 1022 Al atoms
d = 2.70 g>cm3
FIND: radius (r) of sphere
CONCEPTUAL PLAN
Number of
Al atoms
mol Al
V (in cm3)
g Al
1 mol Al
26.98 g Al
1 cm3
6.022 * 1023 Al atoms
1 mol Al
2.70 g Al
V (in cm3)
r
V=
4
3
p r3
RELATIONSHIPS AND EQUATIONS USED
6.022 * 1023 = 1 mol (Avogadro’s number)
26.98 g Al = 1 mol Al (molar mass of aluminum)
2.70 g>cm3 (density of aluminum)
4
V = pr 3 (volume of a sphere)
3
—Continued on the next page
M02_TRO8902_05_GE_C02.indd 119
09/08/20 20:44
120
CHAPTER 2 Atoms and Elements
Continued—
SOLVE
SOLUTION
Finally, follow the conceptual plan to solve the
problem. Begin with 8.55 * 1022 Al atoms and
multiply by the appropriate conversion factors to
arrive at volume in cm3.
8.55 * 1022 Al atoms *
Then solve the equation for the volume of a sphere
for r and substitute the volume to calculate r.
1 mol Al
6.022 * 1023 Al atoms
*
V =
26.98 g Al
1 mol Al
*
1 cm3
= 1.4187 cm3
2.70 g Al
4 3
pr
3
3
3(1.4187 cm )
3V
r = 3
= 3
= 0.697 cm
A 4p
4p
B
CHECK The units of the answer (cm) are correct. The magnitude cannot be estimated accurately, but a radius of about
one-half of a centimeter is reasonable for just over one-tenth of a mole of aluminum atoms.
FOR PRACTICE 2.9 A titanium cube contains 2.86 * 1023 atoms. What is the edge length of the cube? The density of
titanium is 4.50 g>cm3.
FOR MORE PRACTICE 2.9 Find the number of atoms in a copper rod with a length of 9.85 cm and a radius of 1.05 cm.
The density of copper is 8.96 g>cm3.
ANSWER NOW!
2.12
Cc
THE MOLE Without doing any calculations, determine which sample contains
the most atoms.
(a) a 1-g sample of copper
(b) a 1-g sample of carbon
(c) a 10-g sample of uranium
Conceptual
Connection
QUIZ YOURSELF NOW!
Self-Assessment Quiz
Q1. Two samples of a compound containing elements A and B are
decomposed. The first sample produces 15 g of A and 35 g of B.
The second sample produces 25 g of A and what mass of B?
MISSED THIS? Read Section 2.3; Watch KCV 2.3
a) 11 g
b) 58 g
c) 21 g
d) 45 g
Q2. A compound containing only carbon and hydrogen has
a carbon-to-hydrogen mass ratio of 11.89. Which carbonto-hydrogen mass ratio is possible for another compound
composed only of carbon and hydrogen?
MISSED THIS? Read Section 2.3; Watch KCV 2.3
b) 3.97
c) 4.66
d) 7.89
a) 2.50
Q3. Which idea came out of Rutherford’s gold foil experiment?
MISSED THIS? Read Section 2.5
a) Atoms contain protons and neutrons.
b) Matter is composed of atoms.
c) Elements have isotopes.
d) Atoms are mostly empty space.
Q4. A student re-creates the Millikan oil drop experiment and
tabulates the relative charges of the oil drops in terms of a
constant, a.
Drop #1
Drop #2
Drop #3
Drop #4
M02_TRO8902_05_GE_C02.indd 120
a
3
a
2
5
a
2
3a
What charge for the electron (in terms of a)
is consistent with these data?
MISSED THIS? Read Section 2.4
1
3
a) a
b) a
c) a
2
2
d) 2a
Q5. Determine the number of protons and neutrons in the
isotope Fe-58.
MISSED THIS? Read Section 2.6; Watch KCV 2.6, IWE 2.3
a) 26 protons and 58 neutrons
b) 32 protons and 26 neutrons
c) 26 protons and 32 neutrons
d) 58 protons and 58 neutrons
Q6. An isotope of an element contains 82 protons and
122 neutrons. What is the symbol for the isotope?
MISSED THIS? Read Section 2.6; Watch KCV 2.6, IWE 2.3
a) 204
82Pb
b) 122
82Pb
c) 122
40Zr
d) 204
40Zr
Q7. Determine the number of electrons in the Cr 3+ ion.
MISSED THIS? Read Section 2.6
a) 24 electrons
c) 3 electrons
b) 27 electrons
d) 21 electrons
Q8. Which pair of elements do you expect to be most similar in
their chemical properties?
MISSED THIS? Read Section 2.7; Watch KCV 2.7
a) K and Fe
c) Ne and N
b) O and Si
d) Br and I
09/08/20 20:44
Chapter in Review
Intensity %
c) Sr
d) Ba
a) 2+
b) +
c) -
50%
d) 2-
Q11. A naturally occurring sample of an element contains only
two isotopes. The first isotope has a mass of 68.9255 amu
and a natural abundance of 60.11%. The second isotope has
a mass of 70.9247 amu. Find the atomic mass of the element.
MISSED THIS? Read Section 2.8; Watch IWE 2.5
0%
100%
b)
Intensity %
a) 70.13 amu
b) 69.72 amu
c) 84.06 amu
d) 69.93 amu
50%
Q12. Which sample contains the greatest number of atoms?
MISSED THIS? Read Section 2.9; Watch KCV 2.9, IWE 2.8
0%
c)
Q13. Determine the number of atoms in 1.85 mL of mercury.
(The density of mercury is 13.5 g/mL.) MISSED THIS? Read
Section 2.9; Watch KCV 2.9, IWE 2.8, 2.9
a) 3.02 * 1027 atoms
b) 4.11 * 1020 atoms
c) 7.50 * 1022 atoms
d) 1.50 * 1025 atoms
b) O
c) Mg
d) Fe
Q15. Copper has two naturally occurring isotopes with masses
62.94 amu and 64.93 amu and has an atomic mass of 63.55
amu. Which mass spectrum (of those shown at right) is
most likely to correspond to a naturally occurring sample of
copper? MISSED THIS? Read Section 2.9
50%
0%
0 20 40 60 80 100
Mass (amu)
100%
d)
Intensity %
a) Cr
0 20 40 60 80 100
Mass (amu)
100%
50%
0%
6. (a) 7. (d) 8. (d)
Q14. A 20.0 g sample of an element contains 4.95 * 1023 atoms.
Identify the element.
MISSED THIS? Read Section 2.9; Watch KCV 2.9, IWE 2.8
Intensity %
a) 14 g C
b) 49 g Cr
c) 102 g Ag
d) 202 g Pb
0 20 40 60 80 100
Mass (amu)
0 20 40 60 80 100
Mass (amu)
3. (d) 4. (a) 5. (c)
b) Mo
Q10. What is the charge of the ion most commonly formed by S?
MISSED THIS? Read Section 2.7
2. (b)
a) Se
100%
a)
Answers: 1. (b)
Q9. Which element is not a main-group element?
MISSED THIS? Read Section 2.7; Watch KCV 2.7
121
9. (b)
10. (d) 11. (b)
12. (a) 13. (c) 14. (c)
15. (a)
CHAPTER 2 IN REVIEW
TERMS
Section 2.3
law of conservation of
mass (93)
law of definite
proportions (94)
law of multiple
proportions (95)
atomic theory (96)
M02_TRO8902_05_GE_C02.indd 121
Section 2.4
cathode rays (97)
cathode ray tube (97)
electrical charge (97)
electron (98)
Section 2.5
radioactivity (99)
nuclear theory (100)
nucleus (100)
proton (100)
neutrons (101)
Section 2.6
atomic mass unit (amu) (101)
atomic number (Z) (102)
chemical symbol (102)
isotope (104)
natural abundance (104)
mass number (A) (104)
ion (105)
cation (106)
anion (106)
Section 2.7
periodic law (107)
metal (108)
09/08/20 20:44
122
CHAPTER 2 Atoms and Elements
nonmetal (108)
metalloid (108)
semiconductor (108)
main-group elements (108)
transition elements
(transition metals) (108)
family (group) (108)
noble gases (108)
alkali metals (108)
alkaline earth metals (108)
halogens (110)
Section 2.8
Section 2.9
atomic mass (111)
mass spectrometry (112)
mole (mol) (115)
Avogadro’s number (115)
molar mass (115)
CONCEPTS
Brownian Motion (2.1)
■
Brownian motion is the erratic, jittery motion of small particles
that was first observed by Robert Brown in 1827. The description of
Brownian motion by Einstein in 1905 and confirmation by Perrin
in 1908 removed any lingering doubt about the particulate nature
of matter.
The Atomic Theory (2.2, 2.3)
■
■
■
■
Each element is composed of indestructible particles called
atoms.
All atoms of a given element have the same mass and other
properties.
Atoms combine in simple, whole-number ratios to form compounds.
Atoms of one element cannot change into atoms of another element. In a chemical reaction, atoms change the way that they are
bound together with other atoms to form a new substance.
The Electron (2.4)
■
■
J. J. Thomson discovered the electron in the late 1800s through
experiments with cathode rays. He deduced that electrons are
negatively charged, and he measured their charge-to-mass ratio.
Robert Millikan measured the charge of the electron, which—in
conjunction with Thomson’s results—led to the calculation of the
mass of an electron.
The Nuclear Atom (2.5)
■
■
In 1909, Ernest Rutherford probed the inner structure of the atom
by working with a form of radioactivity called alpha radiation and
developed the nuclear theory of the atom.
Nuclear theory states that the atom is mainly empty space, with
most of its mass concentrated in a tiny region called the nucleus
and most of its volume occupied by relatively light electrons.
Subatomic Particles (2.6)
■
■
■
■
■
Atoms are composed of three fundamental particles: the proton
(1 amu, +1 charge), the neutron (1 amu, 0 charge), and the electron (~0 amu, -1 charge).
The number of protons in the nucleus of the atom is its atomic
number (Z) and defines the element.
The sum of the number of protons and neutrons is the mass number (A).
Atoms of an element that have different numbers of neutrons
(and therefore different mass numbers) are isotopes.
Atoms that lose or gain electrons become charged and are ions.
Cations are positively charged and anions are negatively charged.
The Periodic Table (2.7)
■
■
■
■
■
The periodic table tabulates all known elements in order of
increasing atomic number.
The periodic table is arranged so that similar elements are grouped
together in columns.
Elements on the left side and in the center of the periodic table are
metals and tend to lose electrons in chemical changes.
Elements on the upper right side of the periodic table are nonmetals and tend to gain electrons in chemical changes.
Elements located on the boundary between metals and nonmetals
are metalloids.
Atomic Mass and the Mole (2.8, 2.9)
■
■
■
The atomic mass of an element, listed directly below its symbol
in the periodic table, is a weighted average of the masses of the
naturally occurring isotopes of the element.
One mole of an element is the amount of that element that contains Avogadro’s number 16.022 * 1023 2 of atoms.
Any sample of an element with a mass (in grams) that equals its
atomic mass contains one mole of the element. For example, the
atomic mass of carbon is 12.011 amu; therefore, 12.011 g of carbon
contains 1 mol of carbon atoms.
EQUATIONS AND RELATIONSHIPS
Relationship between Mass Number (A), Number of Protons (p),
and Number of Neutrons (n) (2.6)
A = number of protons 1p2 + number of neutrons 1n2
Avogadro’s Number (2.9)
1 mol = 6.0221421 * 1023 particles
Atomic Mass (2.8)
Atomic mass = a 1fraction of isotope n2 * 1mass of isotope n2
n
M02_TRO8902_05_GE_C02.indd 122
09/08/20 20:44
Exercises
123
LEARNING OUTCOMES
Chapter Objectives
Assessment
Apply the mass laws that are the basis of modern atomic theory (2.3)
Examples 2.1, 2.2
Describe the experiments that led to the discovery of the electron
and its charge (2.4)
Exercises 43–46
Explain the structure of an atom (2.5)
Exercises 39–42
Describe the properties of subatomic particles and interpret isotope
symbols (2.6)
Example 2.3
Relate the periodic law to the organization of the periodic table (2.7)
Exercises 63–70
Predict the charge of ions (2.7)
Example 2.4
Determine the atomic mass of atoms (2.8)
Example 2.5 For Practice 2.5
Exercises 71–80
Apply the mole concept (2.9)
Examples 2.6, 2.7, 2.8, 2.9 For Practice 2.6, 2.7, 2.8, 2.9
For More Practice 2.7, 2.8, 2.9 Exercises 81–94
EXERCISES
For Practice 2.1, 2.2
For Practice 2.3
For Practice 2.4
Exercises 29–38
Exercises 47–58
Exercises 59–62
For More Practice 2.5
Mastering Chemistry provides end-of-chapter exercises, feedback-enriched tutorial
problems, animations, and interactive activities to encourage problem-solving practice and
deeper understanding of key concepts and topics.
REVIEW QUESTIONS
1. What is Brownian motion? How is it related to the development
of the idea that matter is particulate?
15. Explain the difference between Z (the atomic number) and A
(the mass number).
2. Summarize the history of the atomic idea. How was Dalton able
to convince others to accept an idea that had been controversial
for 2000 years?
16. Where do elements get their names?
3. State and explain the law of conservation of mass.
18. Describe the two different notations used to specify isotopes
and give an example of each.
4. State and explain the law of definite proportions.
17. What are isotopes? What is percent natural abundance of
isotopes?
5. State and explain the law of multiple proportions. How is the
law of multiple proportions different from the law of definite
proportions?
19. What is an ion? A cation? An anion?
6. What are the main ideas in Dalton’s atomic theory? How do
they help explain the laws of conservation of mass, of constant
composition, and of definite proportions?
21. Describe the characteristic properties of metals, nonmetals,
and metalloids.
7. How and by whom was the electron discovered? What basic
properties of the electron were reported with its discovery?
8. Explain Millikan’s oil drop experiment and how it led to the
measurement of the electron’s charge. Why is the magnitude of
the charge of the electron so important?
9. Describe the plum-pudding model of the atom.
10. Describe Rutherford’s gold foil experiment. How did the experiment prove that the plum-pudding model of the atom was
wrong?
11. Describe Rutherford’s nuclear model of the atom. What was
revolutionary about his model?
12. If matter is mostly empty space, as suggested by Rutherford,
then why does it appear so solid?
13. List the three subatomic particles that compose atoms and give
the basic properties (mass and charge) of each.
14. What defines an element?
M02_TRO8902_05_GE_C02.indd 123
20. State the periodic law. How did the periodic law lead to the
periodic table?
22. List the characteristic properties of each group.
a. noble gases
b. alkali metals
c. alkaline earth metals
d. halogens
23. How do you predict the charges of ions formed by main-group
elements?
24. What is atomic mass? How is it calculated?
25. Explain how a mass spectrometer works.
26. What kind of information can be determined from a mass
spectrum?
27. What is a mole? How is the mole concept useful in chemical
calculations?
28. Why is the mass corresponding to a mole of one element
different from the mass corresponding to a mole of another
element?
09/08/20 20:44
124
CHAPTER 2 Atoms and Elements
PROBLEMS BY TOPIC
Note: Answers to all odd-numbered Problems, numbered in blue, can be
found in Appendix III. Exercises in the Problems by Topic section are paired,
with each odd-numbered problem followed by a similar even-numbered
problem. Exercises in the Cumulative Problems section are also paired, but
somewhat more loosely. (Challenge Problems and Conceptual Problems,
because of their nature, are unpaired.)
The Laws of Conservation of Mass, Definite
Proportions, and Multiple Proportions
29. A hydrogen-filled balloon is ignited, and 1.50 g of hydrogen
reacts with 12.0 g of oxygen. How many grams of water vapor
form? (Assume that water vapor is the only product.)
MISSED THIS? Read Section 2.3; Watch KCV 2.3
30. An automobile gasoline tank holds 22 kg of gasoline. When the
gasoline burns, 84 kg of oxygen is consumed, and carbon
dioxide and water are produced. What total combined mass of
carbon dioxide and water is produced?
31. Two samples of carbon tetrachloride are decomposed into their
constituent elements. One sample produces 49.5 g of carbon
and 585.8 g of chlorine, and the other sample produces 16.5 g
of carbon and 195.3 g of chlorine. Are these results consistent
with the law of definite proportions? Explain your answer.
MISSED THIS? Read Section 2.3; Watch KCV 2.3
32. Two samples of sodium chloride are decomposed into their constituent elements. One sample produces 6.98 g of sodium and
15.5 g of chlorine, and the other sample produces 20.9 g of
sodium and 23.2 g of chlorine. Are these results consistent with
the law of definite proportions? Explain your answer.
33. The mass ratio of sodium to fluorine in sodium fluoride is
1.21:1. A sample of sodium fluoride produces 25.1 g of sodium
upon decomposition. How much fluorine (in grams) forms?
MISSED THIS? Read Section 2.3; Watch KCV 2.3
34. Upon decomposition, one sample of magnesium fluoride produced 1.65 kg of magnesium and 2.58 kg of fluorine. A second
sample produced 1.35 kg of magnesium. How much fluorine (in
grams) did the second sample produce?
35. Two different compounds containing osmium and oxygen have
the following masses of oxygen per gram of osmium: 0.168 and
0.3369 g. Show that these amounts are consistent with the law
of multiple proportions.
MISSED THIS? Read Section 2.3; Watch KCV 2.3
36. Iron forms three different compounds with sulfur. The mass of
sulfur per gram of iron in each compound is tabulated here.
Compound
Grams S per Gram Fe
A
1.15
B
0.861
C
0.574
Show that these masses are consistent with the law of multiple
proportions.
37. Sulfur and oxygen form both sulfur dioxide and sulfur trioxide.
When samples of these are decomposed, the sulfur dioxide produces 2.49 g oxygen and 2.50 g sulfur, while the sulfur trioxide
produces 8.23 g oxygen and 5.50 g sulfur. Calculate the mass of
oxygen per gram of sulfur for each sample and show that these
results are consistent with the law of multiple proportions.
MISSED THIS? Read Section 2.3; Watch KCV 2.3
M02_TRO8902_05_GE_C02.indd 124
38. Sulfur and fluorine form several different compounds, including
sulfur hexafluoride and sulfur tetrafluoride. Decomposition of a
sample of sulfur hexafluoride produces 4.46 g of fluorine and 1.25 g
of sulfur, while decomposition of a sample of sulfur tetrafluoride
produces 4.43 g of fluorine and 1.86 g of sulfur. Calculate the mass
of fluorine per gram of sulfur for each sample and show that these
results are consistent with the law of multiple proportions.
Atomic Theory, Nuclear Theory, and Subatomic
Particles
39. Which statements are consistent with Dalton’s atomic theory as
it was originally stated? Why?
MISSED THIS? Read Section 2.3; Watch KCV 2.3
a. Sulfur and oxygen atoms have the same mass.
b. All cobalt atoms are identical.
c. Potassium and chlorine atoms combine in a 1:1 ratio to form
potassium chloride.
d. Lead atoms can be converted into gold.
40. Which statements are inconsistent with Dalton’s atomic theory
as it was originally stated? Why?
a. All carbon atoms are identical.
b. An oxygen atom combines with 1.5 hydrogen atoms to form
a water molecule.
c. Two oxygen atoms combine with a carbon atom to form a
carbon dioxide molecule.
d. The formation of a compound often involves the destruction
of one or more atoms.
41. Which statements are consistent with Rutherford’s nuclear
theory as it was originally stated? Why?
MISSED THIS? Read Section 2.5
a. The volume of an atom is mostly empty space.
b. The nucleus of an atom is small compared to the size of the atom.
c. Neutral lithium atoms contain more neutrons than protons.
d. Neutral lithium atoms contain more protons than electrons.
42. Which statements are inconsistent with Rutherford’s nuclear
theory as it was originally stated? Why?
a. Since electrons are smaller than protons and since a hydrogen atom contains only one proton and one electron, it must
follow that the volume of a hydrogen atom is mostly due to
the proton.
b. A nitrogen atom has seven protons in its nucleus and seven
electrons outside of its nucleus.
c. A phosphorus atom has 15 protons in its nucleus and 150
electrons outside of its nucleus.
d. The majority of the mass of a fluorine atom is due to its nine
electrons.
43. A chemist in an imaginary universe, where electrons have a
different charge than they do in our universe, performs the
Millikan oil drop experiment to measure the electron’s charge.
The charges of several drops are tabulated here. What is the
charge of the electron in this imaginary universe?
MISSED THIS? Read Section 2.4
Drop #
Charge
A
- 3.3 * 10 -19 C
B
- 4.4 * 10 -19 C
C
- 5.5 * 10 -19 C
D
- 2.2 * 10 -19 C
09/08/20 20:44
125
Exercises
44. Imagine a unit of charge called the zorg. A chemist performs the
oil drop experiment and measures the charge of each drop in
zorgs. Based on the results listed here, what is the charge of the
electron in zorgs (z)? How many electrons are in each drop?
Drop #
Charge
A
- 4.2 * 10 -9 z
B
- 8.6 * 10 -9 z
C
- 5.6 * 10 -9 z
D
- 11.2 * 10 -9 z
45. On a dry day, your body can accumulate static charge from
walking across a carpet or from brushing your hair. If your body
develops a charge of −11 μC (microcoulombs), how many excess
electrons has it acquired? What is their collective mass? MISSED
THIS? Read Section 2.4
46. How many electrons are necessary to produce a charge of
-1.0 C? What is the mass of this many electrons?
47. Which statements about subatomic particles are true?
MISSED THIS? Read Section 2.4, 2.5
a. If an atom has an equal number of protons and electrons, it
will be charge-neutral.
b. Electrons are attracted to protons.
c. Electrons are much lighter than neutrons.
d. Protons have twice the mass of neutrons.
48. Which statements about subatomic particles are false?
a. Protons and electrons have charges of the same magnitude
but opposite signs.
b. Protons have about the same mass as neutrons.
c. Some atoms don’t have any protons.
d. Protons and neutrons have charges of the same magnitude
but opposite signs.
49. How many electrons does it take to equal the mass of a proton?
MISSED THIS? Read Section 2.4
50. A helium nucleus has two protons and two neutrons. How many
electrons does it take to equal the mass of a helium nucleus?
Isotopes and Ions
51. Write isotopic symbols of the form X-A (e.g., C-13) for each isotope. MISSED THIS? Read Section 2.6; Watch KCV 2.6
a. the argon isotope with 20 neutrons
b. the uranium isotope with 144 neutrons
c. the phosphorus isotope with 17 neutrons
d. the neon isotope with 12 neutrons
52. Write isotopic symbols in the form AZX for each isotope.
a. the copper isotope with 34 neutrons
b. the copper isotope with 36 neutrons
c. the potassium isotope with 21 neutrons
d. the argon isotope with 22 neutrons
53. Determine the number of protons and the number of neutrons
in each isotope.
MISSED THIS? Read Section 2.6; Watch KCV 2.6, IWE 2.3
b. 23
c. 222
d. 208
a. 147N
11Na
86Rn
82Pb
54. Determine the number of protons and the number of neutrons
in each isotope.
b. 226
c. 99
d. 33
a. 40
19K
88Ra
43Tc
15P
M02_TRO8902_05_GE_C02.indd 125
55. The amount of carbon-14 in ancient artifacts and fossils is often
used to establish their age. Determine the number of protons
and the number of neutrons in carbon-14 and write its symbol
in the form AZX.
MISSED THIS? Read Section 2.6; Watch KCV 2.6, IWE 2.3
56. Uranium-235 is used in nuclear fission. Determine the number
of protons and the number of neutrons in uranium-235 and
write its symbol in the form AZX.
57. Determine the number of protons and the number of electrons
in each ion.
MISSED THIS? Read Section 2.6; Watch KCV 2.6, IWE 2.3
b. S2c. Br d. Cr 3+
a. Ni2+
58. Determine the number of protons and the number of electrons
in each ion.
b. N3c. Fe3+
d. Sr 2+
a. Al3+
59. Predict the charge of the monoatomic (single atom) ion formed
by each element.
MISSED THIS? Read Section 2.7
a. O
b. Li
c. Sr
d. Cs
60. Predict the charge of the ion formed by each element.
a. Mg
b. N
c. F
d. Na
61. Fill in the blanks to complete the table.
MISSED THIS? Read Section 2.6; Watch KCV 2.6, IWE 2.3
Symbol
Ion Formed
Number of
Electrons in
Ion
Number of
Protons in
Ion
Ca
Ca2+
______
______
______
Na +
10
______
Se
______
______
34
Al
______
______
13
62. Fill in the blanks to complete the table.
Symbol
Ion Formed
Number of
Electrons in
Ion
Cl
______
______
17
Te
______
54
______
Br
Br -
______
______
______
2+
______
38
Sr
Number of
Protons in
Ion
The Periodic Table and Atomic Mass
63. Write the name of each element and classify it as a metal, nonmetal, or metalloid.
MISSED THIS? Read Section 2.7; Watch KCV 2.7
a. K
b. Ba
c. I
d. O
e. Sb
64. Write the symbol for each element and classify it as a metal,
nonmetal, or metalloid.
a. iron
b. neon
c. calcium d. gold
e. krypton
65. Determine whether or not each element is a main-group
element. MISSED THIS? Read Section 2.7; Watch KCV 2.7
a. tellurium
b. potassium
c. vanadium
d. manganese
66. Determine whether or not each element is a transition element.
a. Cr
b. Br
c. Mo
d. Cs
09/08/20 20:44
CHAPTER 2 Atoms and Elements
68. Classify each element as an alkali metal, alkaline earth metal,
halogen, or noble gas.
a. F
b. Sr
c. K
d. Ne
e. At
69. Which pair of elements do you expect to be most similar? Why?
MISSED THIS? Read Section 2.7; Watch KCV 2.7
a. N and Ni
b. Mo and Sn
c. Na and Mg
d. Cl and F
e. Si and P
70. Which pair of elements do you expect to be most similar? Why?
a. nitrogen and oxygen
b. titanium and gallium
c. lithium and sodium
d. germanium and arsenic
e. argon and bromine
71. Gallium has two naturally occurring isotopes with the following masses and natural abundances:
MISSED THIS? Read Section 2.8
Isotope
Mass (amu)
Abundance (%)
Ga-69
68.92558
60.108
Ga-71
70.92470
39.892
Sketch the mass spectrum of gallium.
72. Magnesium has three naturally occurring isotopes with the
following masses and natural abundances:
Isotope
Mass (amu)
Abundance (%)
Mg-24
23.9850
78.99
Mg-25
24.9858
10.00
Mg-26
25.9826
11.01
Sketch the mass spectrum of magnesium.
73. The atomic mass of fluorine is 18.998 amu, and its mass spectrum shows a large peak at this mass. The atomic mass of chlorine is 35.45 amu, yet the mass spectrum of chlorine does not
show a peak at this mass. Explain the difference.
MISSED THIS? Read Section 2.8
74. The atomic mass of copper is 63.546 amu. Do any copper isotopes have a mass of 63.546 amu? Explain.
75. An element has two naturally occurring isotopes. Isotope 1 has
a mass of 120.9038 amu and a relative abundance of 57.4%, and
isotope 2 has a mass of 122.9042 amu. Find the atomic mass of
this element and identify it.
MISSED THIS? Read Section 2.8; Watch IWE 2.5
M02_TRO8902_05_GE_C02.indd 126
76. An element has four naturally occurring isotopes with the
masses and natural abundances given here. Find the atomic
mass of the element and identify it.
Isotope
Mass (amu)
Abundance (%)
1
135.90714
0.19
2
137.90599
0.25
3
139.90543
88.43
4
141.90924
11.13
77. Bromine has two naturally occurring isotopes (Br-79 and Br-81)
and has an atomic mass of 79.904 amu. The mass of Br-81 is
80.9163 amu, and its natural abundance is 49.31%. Calculate
the mass and natural abundance of Br-79.
MISSED THIS? Read Section 2.8; Watch IWE 2.5
78. Silicon has three naturally occurring isotopes (Si-28, Si-29, and
Si-30). The mass and natural abundance of Si-28 are 27.9769
amu and 92.2%, respectively. The mass and natural abundance
of Si-29 are 28.9765 amu and 4.67%, respectively. Find the mass
and natural abundance of Si-30.
79. Use the mass spectrum of europium to determine the atomic
mass of europium.
MISSED THIS? Read Section 2.8; Watch IWE 2.5
100%
Intensity %
67. Classify each element as an alkali metal, alkaline earth metal,
halogen, or noble gas.
MISSED THIS? Read Section 2.7; Watch KCV 2.7
a. sodium
b. iodine
c. calcium
d. barium
e. krypton
50%
151 153
Mass (amu)
80. Use the mass spectrum of rubidium to determine the atomic
mass of rubidium.
100%
Intensity %
126
50%
85
87
Mass (amu)
The Mole Concept
81. Determine the number of sulfur atoms in 4.1 mol of sulfur.
MISSED THIS? Read Section 2.9; Watch KCV 2.9
82. How many moles of aluminum do 6.50 * 1024 aluminum
atoms constitute?
09/08/20 20:44
Exercises
83. What is the amount, in moles, in each elemental sample?
MISSED THIS? Read Section 2.9; Watch KCV 2.9
a. 11.5 g Ar
b. 3.45 g Zn
c. 26.4 g Ta
d. 0.218 g Li
84. What is the mass, in grams, of each elemental sample?
a. 2.4 * 10 -3 mol Sb
b. 0.0359 mol Ba
c. 44.3 mol Xe
d. 1.4 mol W
85. How many silver atoms are there in 2.84 g of silver?
MISSED THIS? Read Section 2.9; Watch KCV 2.9, IWE 2.8
127
90. Calculate the mass, in kg, of each sample.
a. 7.55 * 1026 cadmium atoms
b. 8.15 * 1027 nickel atoms
c. 1.22 * 1027 manganese atoms
d. 5.48 * 1029 lithium atoms
91. How many carbon atoms are there in a diamond (pure carbon)
with a mass of 48 mg?
MISSED THIS? Read Section 2.9; Watch KCV 2.9, IWE 2.8
92. How many helium atoms are there in a helium blimp containing 536 kg of helium?
86. What is the mass of 4.74 * 1021 platinum atoms?
93. Calculate the average mass, in grams, of one platinum atom.
MISSED THIS? Read Section 2.9; Watch KCV 2.9, IWE 2.8
87. Determine the number of atoms in each sample.
MISSED THIS? Read Section 2.9; Watch KCV 2.9, IWE 2.8
a. 5.19 g P
b. 2.27 g Hg
c. 1.88 g Bi
d. 0.083 g Sr
94. Scientists at the National Institute for Standards and Technology (NIST) wrote the initials of their agency with 70 individual
cobalt atoms (as shown below). Calculate the total mass of these
letters in grams.
88. Calculate the number of atoms in each sample.
a. 14.955 g Cr
b. 39.733 g S
c. 12.899 g Pt
d. 97.552 g Sn
89. Calculate the mass, in grams, of each sample.
MISSED THIS? Read Section 2.9; Watch KCV 2.9, IWE 2.8
a. 2.0 * 1023 gold atoms
b. 2.80 * 1022 helium atoms
c. 2.4 * 1023 lead atoms
d. 8.0 * 1021 uranium atoms
a
CUMULATIVE PROBLEMS
100%
Intensity %
95. A 7.45-g sample of HCN contains 0.276 g of H and 3.86 g of N.
Find the mass of carbon in a sample of HCN with a mass of 3.37 g.
96. The ratio of sulfur to oxygen by mass in SO2 is 1.0:1.0.
a. Find the ratio of sulfur to oxygen by mass in SO3.
b. Find the ratio of sulfur to oxygen by mass in S2O.
97. The ratio of oxygen to carbon by mass in carbon monoxide is
1.33:1.00. Find the formula of an oxide of carbon in which the
ratio by mass of oxygen to carbon is 2.00:1.00.
99. An a particle, 4He2+, has a mass of 4.00151 amu. Find the value
of its charge-to-mass ratio in C/kg.
100. Naturally occurring iodine has an atomic mass of 126.9045
amu. A 12.3849 g sample of iodine is accidentally contaminated
with an additional 1.00070 g of 129I, a synthetic radioisotope of
iodine used in the treatment of certain diseases of the thyroid
gland. The mass of 129I is 128.9050 amu. Find the apparent
“atomic mass” of the contaminated iodine.
101. Use the mass spectrum of lead to estimate the atomic mass of
lead. Estimate the mass and percent intensity values from the
graph to three significant figures.
M02_TRO8902_05_GE_C02.indd 127
204 206 207 208
Mass (amu)
102. Use the mass spectrum of mercury to estimate the atomic mass
of mercury. Estimate the masses and percent intensity values
from the graph to three significant figures.
100%
Intensity %
98. The ratio of the mass of a nitrogen atom to the mass of an atom
of 12C is 7:6, and the ratio of the mass of nitrogen to oxygen in
N2O is 7:4. Find the mass of 1 mol of oxygen atoms.
50%
50%
196 198 199 200 201 202 204
Mass (amu)
09/08/20 20:44
128
CHAPTER 2 Atoms and Elements
103. Nuclei with the same number of neutrons but different mass
numbers are called isotones. Write the symbols of four isotones
of 236Th.
104. Fill in the blanks to complete the table.
Symbol
Number Number Number
of n
Charge
of p
of e −
Z
A
Si
14
_____
_____
14
14
_____
2-
____
32
_____
_____
_____
2-
S
Cu2+
____ _____
_____
_____
34
2+
_____
15
_____
15
16
_____
_____
105. Fill in the blanks to complete the table.
Number Number Number
of n
Charge
of p
of e −
Symbol
Z
A
_____
8
____
_____
_____
8
2-
2+
20
____
_____
_____
20
_____
Mg2+
____
25
_____
_____
13
2+
3-
____
14
_____
10
______
_____
Ca
N
106. Neutron stars are believed to be composed of solid nuclear matter, primarily neutrons. Assume the radius of a neutron to be
approximately 1.0 * 10 -13 cm, and calculate its density. [Hint:
For a sphere V = 14>32pr 3.] Assuming that a neutron star has
the same density as a neutron, calculate the mass (in kg) of a
piece of a neutron star the size of a spherical pebble with a
radius of 0.15 mm.
107. Carbon-12 contains six protons and six neutrons. The radius of
the nucleus is approximately 2.7 fm (femtometers), and the
radius of the atom is approximately 70 pm (picometers). Calculate the volume of the nucleus and the volume of the atom.
What percentage of the carbon atom’s volume is occupied by
the nucleus? (Assume two significant figures.)
108. A penny has a thickness of approximately 1.0 mm. If you
stacked Avogadro’s number of pennies one on top of the other
on Earth’s surface, how far would the stack extend (in km)? [For
comparison, the sun is about 150 million km from Earth, and
the nearest star (Proxima Centauri) is about 40 trillion km from
Earth.]
109. Consider the stack of pennies in the previous problem. How
much money (in dollars) would this represent? If this money
were equally distributed among the world’s population of
7.0 billion, how much would each person receive? Would each
person be a millionaire? A billionaire? A trillionaire?
110. The mass of an average blueberry is 0.72 g, and the mass of an
automobile is 1.9 * 103 kg. Find the number of automobiles
whose total mass is the same as 1.0 mol of blueberries.
111. Suppose that atomic masses were based on the assignment of a
mass of 12.000 g to 1 mol of carbon, rather than 1 mol of 12C.
What would the atomic mass of oxygen be? (The atomic masses
of carbon and oxygen based on the assignment of 12.000 g to
1 mol of 12C are 12.011 amu and 15.9994 amu, respectively.)
112. A pure titanium cube has an edge length of 2.80 in. How many
titanium atoms does it contain? Titanium has a density of
4.50 g/cm3.
113. A pure copper sphere has a radius 0.928 in. How many copper
atoms does it contain? [The volume of a sphere is 14>32pr 3, and
the density of copper is 8.96 g/cm3.]
114. What is the radius (in cm) of a pure aluminum sphere that contains 2.96 * 1024 aluminum atoms? [The volume of a sphere is
14>32pr 3, and the density of aluminum is 2.70 g/cm3.]
115. What is the edge length (in cm) of a titanium cube that contains 3.35 * 1024 titanium atoms? The density of titanium is
4.50 g/cm3.
116. Boron has only two naturally occurring isotopes. The mass of
boron-10 is 10.01294 amu, and the mass of boron-11 is 11.00931
amu. Calculate the relative abundances of the two isotopes.
117. Lithium has only two naturally occurring isotopes. The mass of
lithium-6 is 6.01512 amu, and the mass of lithium-7 is 7.01601
amu. Calculate the relative abundances of the two isotopes.
118. Common brass is a copper and zinc alloy containing 37.0% zinc
by mass and having a density of 8.48 g/cm3. A fitting composed
of common brass has a total volume of 102.8 cm3. How many
atoms (copper and zinc) does the fitting contain?
119. A 68.4-g sample of a gold and palladium alloy contains 3.41 * 1023
atoms. What is the composition (by mass) of the alloy?
120. Naturally occurring chlorine is composed of two isotopes: 75.76%
Cl-35 (mass 34.9688 amu) and 24.24% Cl-37 (mass 36.9659 amu).
Naturally occurring oxygen is composed of three isotopes:
99.757% O-16 (mass 15.9949 amu), 0.038% O-17 (mass 16.9991
amu), and 0.205% O-18 (mass 17.9991 amu). The compound
dichlorine monoxide is composed of two chlorine atoms and one
oxygen atom bonded together to form the Cl2O molecule. How
many Cl2O molecules of different masses naturally exist? Give
the masses of the three most abundant Cl2O molecules.
121. Silver is composed of two naturally occurring isotopes: Ag-107
(51.839%) and Ag-109. The ratio of the masses of the two isotopes is 1.0187. What is the mass of Ag-107?
122. The U.S. Environmental Protection Agency (EPA) sets limits on
healthful levels of air pollutants. The maximum level that the
EPA considers safe for lead air pollution is 1.5 mg>m3. If your
lungs were filled with air containing this level of lead, how
many lead atoms would be in your lungs? (Assume a total lung
volume of 5.36 L.)
123. Pure gold is usually too soft to use in jewelry making, so it is
often alloyed with other metals. How many gold atoms are in a
0.273-oz, 18 K gold bracelet? (18 K gold is 75% gold by mass.)
CHALLENGE PROBLEMS
124. Section 2.8 states that 1 mol of sand grains would cover the
state of Texas to several feet. Estimate how many feet by assuming that the sand grains are cube-shaped, each one with an
edge length of 0.30 mm. Texas has a land area of 268,601
square miles.
M02_TRO8902_05_GE_C02.indd 128
125. Use the concepts in this chapter to obtain an estimate for the
number of atoms in the universe. Make the following assumptions: (a) All of the atoms in the universe are hydrogen atoms in
stars. (This is not a ridiculous assumption because over threefourths of the atoms in the universe are in fact hydrogen.
09/08/20 20:44
Exercises
Gas and dust between the stars represent only about 15% of the
visible matter of our galaxy, and planets compose a far tinier
fraction.) (b) The sun is a typical star composed of pure hydrogen with a density of 1.4 g/cm3 and a radius of 7 * 108 m.
(c) Each of the roughly 100 billion stars in the Milky Way galaxy
contains the same number of atoms as our sun. (d) Each of the
10 billion galaxies in the visible universe contains the same
number of atoms as our Milky Way galaxy.
126. Below is a representation of 50 atoms of a fictitious element
called pearsonium (Ps). The red spheres represent Ps-296, the
blue spheres Ps-297, and the green spheres Ps-298.
Isotope
Mass
Ps-296
24.6630 * Mass(12C)
Ps-297
24.7490 * Mass(12C)
Ps-298
24.8312 * Mass(12C)
129
127. The ratio of oxygen to nitrogen by mass in NO2 is 2.29. The ratio
of fluorine to nitrogen by mass in NF3 is 4.07. Find the ratio of
oxygen to fluorine by mass in OF2.
128. Naturally occurring cobalt consists of only one isotope, 59Co,
whose relative atomic mass is 58.9332. A synthetic radioactive
isotope of cobalt, 60Co, has a relative atomic mass of 59.9338
and is used in radiation therapy for cancer. A 1.5886 g sample of
cobalt has an apparent “atomic mass” of 58.9901. Find the mass
of 60Co in this sample.
129. A 7.36 g sample of copper is contaminated with an additional
0.51 g of zinc. Suppose an atomic mass measurement was performed on this sample. What would be the measured atomic mass?
a. Assuming that the sample is statistically representative of a
naturally occurring sample, calculate the percent natural
abundance of each Ps isotope.
b. Draw the mass spectrum for a naturally occurring sample
of Ps.
c. The mass of each Ps isotope is measured relative to C-12 and
tabulated. Use the mass of C-12 to convert each of the masses
to amu and calculate the atomic mass of Ps.
130. The ratio of the mass of O to the mass of P in P2O3 is 24:31. Another
binary (two-element) compound of phosphorous has a ratio of O
to P of 32:32 and contains two phosphorous atoms per molecule.
What is the formula of the binary compound? What is the ratio of
O to P in the next member of this series of compounds?
131. Naturally occurring magnesium has an atomic mass of 24.312
and consists of three isotopes. The major isotope is 24Mg, natural abundance 78.99%, relative atomic mass 23.98504. The next
most abundant isotope is 26Mg, relative atomic mass 25.98259.
The third most abundant isotope is 25Mg, whose natural abundance is in the ratio of 0.9083 to that of 26Mg. Find the relative
atomic mass of 25Mg.
CONCEPTUAL PROBLEMS
132. Which answer is an example of the law of multiple proportions? Explain.
a. Two different samples of water are found to have the same
ratio of hydrogen to oxygen.
b. When hydrogen and oxygen react, the mass of water formed is
exactly equal to the mass of hydrogen and oxygen that reacted.
c. The mass ratio of oxygen to hydrogen in water is 8:1. The
mass ratio of oxygen to hydrogen in hydrogen peroxide
(a compound that only contains hydrogen and oxygen) is 16:1.
133. Lithium has two naturally occurring isotopes: Li-6 (natural
abundance 7.5%) and Li-7 (natural abundance 92.5%). Using
circles to represent protons and squares to represent neutrons,
draw the nucleus of each isotope. How many Li-6 atoms are
present, on average, in a 1000-atom sample of lithium?
135. The mole is defined as the amount of a substance containing
the same number of particles as exactly 12 g of C-12. The amu is
defined as 1/12 of the mass of an atom of C-12. Why is it important that both of these definitions reference the same isotope?
What would be the result, for example, of defining the mole
with respect to C-12, but the amu with respect to Ne-20?
136. Without doing any calculations, determine which of the samples contains the greatest amount of the element in moles.
Which contains the greatest mass of the element?
a. 55.0 g Cr
b. 45.0 g Ti
c. 60.0 g Zn
137. The atomic radii of the isotopes of an element are identical to
one another. However, the atomic radii of the ions of an element are significantly different from the atomic radii of the
neutral atom of the element. Explain.
134. As we saw in the previous problem, lithium has two naturally
occurring isotopes: Li-6 (natural abundance 7.5%; mass 6.0151
amu) and Li-7 (natural abundance 92.5%; mass 7.0160 amu).
Without doing any calculations, determine which mass is closest to the atomic mass of Li.
b. 6.50 amu
c. 7.00 amu
a. 6.00 amu
M02_TRO8902_05_GE_C02.indd 129
09/08/20 20:44
130
CHAPTER 2 Atoms and Elements
QUESTIONS FOR GROUP WORK
Active Classroom Learning
Discuss these questions with the group and record your consensus
answer.
138. The table shown here includes data similar to those used by
Mendeleev when he created the periodic table. On a small card,
write the symbol, atomic mass, and a stable compound formed
by each element. Without consulting a periodic table, arrange
the cards so that atomic mass increases from left to right and
elements with similar properties are above and below each
other. Copy the periodic table you have invented onto a piece of
paper. There is one element missing. Predict its mass and a stable compound it might form.
Element
Atomic Mass
Stable Compound
Be
9
BeCl2
S
32
H2S
F
19
F2
Ca
40
CaCl2
Li
7
LiCl
Si
28
SiH4
Cl
35.4
Cl2
B
10.8
BH3
Ge
72.6
GeH4
N
14
NF3
O
16
H2O
Ga
69.7
GaH3
As
75
AsF3
C
12
CH4
K
39
KCl
Mg
24.3
MgCl2
Se
79
H2Se
Al
27
AlH3
Br
80
Br2
Na
23
NaCl
139. In a naturally occurring sample, 19.8% of boron atoms have five
neutrons and 80.2% have six neutrons. What is the mass number of each boron isotope? Sketch a sample of 10 atoms that is
nearly representative of a natural sample. What is the average
mass of the atoms in your drawing? What is the atomic mass of
boron? (Boron-10 has a mass of 10.01294 amu, and boron-11
has a mass of 11.00931 amu.)
140. In complete sentences, describe the similarities and differences
between:
a. different isotopes of an element
b. a neutral atom and an ion of the same element
141. Calculate the mass in grams of one mole of each of the following (the mass of a single item is given in parentheses): electrons
(9.10938 * 10 -28 g), protons (1.67262 * 10 -24 g), neutrons
(1.67493 * 10 -24 g), atoms of carbon-12 (1.992646 * 10 -23 g),
and doughnuts (74 g). Compare the mass of one mole of
carbon-12 atoms to the sum of the masses of the particles that it
contains. If the doughnut mentioned in this question were
made entirely of carbon, how many atoms would it contain?
DATA INTERPRETATION AND ANALYSIS
142. The U.S. Environmental Protection Agency (U.S. EPA) monitors air
quality in the United States. Lead is among the pollutants regularly
monitored and regulated. Lead is released into the atmosphere primarily by the processing of metal ores containing lead and by leadbased battery manufacturing. The effects of too much exposure to
lead include neurological damage and cardiovascular disease.
Because of the Clear Air Act and its amendments, the amounts of
lead in air have been decreasing for many years. The chart below
shows the lead concentration in air in the United States from 2000
to 2016. Examine the data and answer the questions that follow.
Lead Air Quality
Pb Concentration mg/m3
0.35
0.30
0.25
0.20
a. Determine the lead concentrations in 2000 and in 2016.
b. Calculate the percent change in lead concentration that
occurred from 2000 to 2016. Hint: Calculate the percent
change with the following equation:
percent change =
(final concentration - initial concentration)
* 100%
initial concentration
c. How many lead atoms were in one cubic centimeter of air in
2011?
d. Examine the mass spectrum for lead shown below. How
many Pb-206 atoms were in one cubic centimeter of air in
2011?
100%
Intensity %
Lead Air Quality
50%
204 206 207 208
Mass (amu)
0.15
0.10
0.05
0
2000 2002 2004 2006 2008 2010 2012 2014 2016 ◀ Source: U.S. EPA Air Trends
Year
(http://www3.epa.gov/airtrends/lead.html)
M02_TRO8902_05_GE_C02.indd 130
09/08/20 20:44
Exercises
131
Cc ANSWERS TO CONCEPTUAL CONNECTIONS
The Law of Conservation of Mass
2.1
(a) Most of the matter that composed the log undergoes a
chemical change by reacting with oxygen molecules in the
air. The products of the reaction (mostly carbon dioxide and
water) are released as gases into the air.
Law of Definite Proportions
2.2
(d) If the sample contains 10 g H, then it must contain 47 g N
for a nitrogen-to-hydrogen ratio of 4.7:1.
The Laws of Definite and Multiple Proportions
2.3
(a) The law of definite proportions applies to two or more
samples of the same compound and states that the ratio of one
element to the other is always the same. The law of multiple
proportions applies to two different compounds containing
the same two elements (A and B) and states that the masses of
B that combine with 1 g of A are always related to each other
as a small whole-number ratio.
The Millikan Oil Drop Experiment
2.4
(c) The drop contains three
excess
(3 * ( - 1.6 * 10 -19 C) = - 4.8 * 10 -19 C).
electrons
Atomic Number
2.5
(a) Tin (Sn) has atomic number 50 and therefore contains
50 protons in its nucleus.
Mass Number and Atomic Number
2.6
(c) The number of neutrons is equal to the mass number
minus the atomic number. Since the atomic number of
argon is 18, the number of neutrons is 40 - 18 = 22.
M02_TRO8902_05_GE_C02.indd 131
Isotopes
2.7
(a) Carbon-13 has 6 protons (Z = 6) and 7 neutrons. The
image must therefore contain 6 circles and 7 squares.
Ions
2.8
(c) Since the atomic number of oxygen is 8, it contains 8 protons. In order for the anion to have an overall charge of 2-, it
must contain 10 electrons.
The Nuclear Atom, Isotopes, and Ions
2.9
(b) The number of neutrons in the nucleus of an atom does
not affect the atom’s size because the nucleus is miniscule
compared to the atom itself.
The Periodic Table
2.10 (d) Lead is both a main-group element and a metal.
Atomic Mass
2.11 (a) Since 98.93% of the atoms are C-12, we would expect
the atomic mass to be very close to the mass of the C-12
isotope.
The Mole
2.12 (b) The carbon sample contains more atoms than the copper
sample because carbon has a lower molar mass than copper.
Carbon atoms are lighter than copper atoms, so a 1-g sample
of carbon contains more atoms than a 1-g sample of copper.
The carbon sample also contains more atoms than the uranium sample because even though the uranium sample has
10 times the mass of the carbon sample, a uranium atom is
more than 10 times as massive (238 g/mol for uranium versus
12 g/mol for carbon).
09/08/20 20:44
0
You can add this document to your study collection(s)
Sign in Available only to authorized usersYou can add this document to your saved list
Sign in Available only to authorized users(For complaints, use another form )