Physical Metallurgy
Chapter 1 The Structure of Materials
Hung-Wei (Homer) Yen (homeryen@ntu.edu.tw)
Department of Materials Science & Engineering
National Taiwan University
PHYSICAL METALLURGY MSE2019
1
Outline
• Opening Story
• The Structure of Materials
• Crystallographic Indices
• Crystal Structure
• Stereographic Projection
Diagram
• Quasicrystal & Anisotropic
Materials
D Smith et al., Combinatorial Theory, 2024
PHYSICAL METALLURGY MSE2019
2
Opening Story
PHYSICAL METALLURGY MSE2019
3
Crystalline & Amorphous
Chemistry: SiO2
Quartz-Crystalline
Glass-Amorphous
PHYSICAL METALLURGY MSE2019
4
Crystalline & Amorphous
Quartz
Purity
Appearance
99% SiO2
Facets
Glass
70-75% SiO2
Any Shape
Hardness
Conductivity
Transparency
Sound
Mohs Scale 7
Conductor
All Visible Lights
Ringing
Mohs Scale 5.5
Insulator
UV Blocked
Deep & Short
PHYSICAL METALLURGY MSE2019
5
Quartz Crystal (水晶)
• Name: α-SiO2
• Crystal Family: Trigonal
• Space Group: P3-121 or P3-221 (depends on charity)
• Lattice Constant: a=b=4.92 Å and c=5.43 Å
PHYSICAL METALLURGY MSE2019
6
Source: Rui Chen et al., Applied Physics A, 2022
Quartz Crystal (水晶)
*Theoretical calculation might be deviated from
practical value.
PHYSICAL METALLURGY MSE2019
7
Amethyst (紫水晶)
Source: Australian Museum
PHYSICAL METALLURGY MSE2019
8
Source: Rui Chen et al., Applied Physics A, 2022
Amethyst (紫水晶)
*Theoretical calculation might be deviated from
practical value.
PHYSICAL METALLURGY MSE2019
9
Diamond
• Diamond: Diamond Structure (Fd3m)
• Silicon: Diamond Structure (Fd3m)
• SiC (Moissanite): Zinc Blende Structure (F-43m)
Carbon
Silicon
Silicon
Carbon
a = 3.56 Å
a = 5.43 Å
PHYSICAL METALLURGY MSE2019
a = 4.35 Å
10
Source: E Fritsch and GR Rossman, GEMS & GEMOLOGY, 1988
Diamond
Nitrogen
PHYSICAL METALLURGY MSE2019
Boron
11
Source: E Fritsch and GR Rossman, GEMS & GEMOLOGY, 1988
Diamond
PHYSICAL METALLURGY MSE2019
12
Summary
• Basic color of GEM comes from its electronic band structure,
which is determined by crystal structure and donors.
• The crystal structure of a material determines its mechanical,
physical, and chemical properties.
• Understanding crystal structures is critical to designing advanced
materials for various industries.
PHYSICAL METALLURGY MSE2019
13
The Structure of Materials
PHYSICAL METALLURGY MSE2019
14
The Structure of Materials
• Most engineering materials are polycrystalline.
Macrostructure
Microstructure
grain
Toyota Corolla Arm Suspension
SEM Image
PHYSICAL METALLURGY MSE2019
15
The Structure of Materials
• The structure of materials should be defined based on the
corresponding length scale.
Microstructure
Nanostructure
TEM Image
HRTEM Image
PHYSICAL METALLURGY MSE2019
16
The Structure of Materials
• There is the basic structure inside the grains themselves: that is,
the atomic arrangements inside the crystals.
• This form of structure is logically called the crystal structure.
PHYSICAL METALLURGY MSE2019
17
Crystal Structure
• A crystal is defined as an orderly array of atoms in space. There
are many different types of crystal structures, some of which are
quite complicated.
• Fortunately, most metals crystallize in one of three relatively
simple structures: the face-centered cubic, the body-centered
cubic, and the close-packed hexagonal.
Li, Fe, Cr, V, Nb, Mo, W…
Cu, Al, Au, Ag, Ni, Pb…
PHYSICAL METALLURGY MSE2019
Mg, Ti, Zn, Zr, Be, Cd…
18
BCC (Cubic I Lattice)
• coordination number: 8
O site
• unit cell contains 2 atoms
• closest packing direction along body diagonal
• atomic packing factor = 0.68
T site
• Interstices per unit cell
• 6 octahedral interstices
• 12 tetrahedral interstices
PHYSICAL METALLURGY MSE2019
19
FCC (Cubic F Lattice)
• coordination number: 12
O site
• unit cell contains 4 atoms
• closest packing direction along face diagonal
• atomic packing factor = 0.74
T site
• Interstices per unit cell per unit cell
• 4 octahedral interstices
• 8 tetrahedral interstices
PHYSICAL METALLURGY MSE2019
20
HCP (Hexagonal P Lattice)
• coordination number:12
O site
• rhombic unit cell contains 2 atoms
hexagonal unit cell contains 6 atoms
• close packing directions along 𝑎⃑ , 𝑎⃑ and 𝑎⃑
T site
• atomic packing factor = 0.74
• interstices in HCP per unit cell
• 2 octahedral interstices
• 4 tetrahedral interstices
• Closest Packed:
8/3
1.633
PHYSICAL METALLURGY MSE2019
21
FCC & HCP
• Closest Packed Plane
• FCC: {1 1 1} plane – ABCBAC… stacking
• HCP: {0 0 1} or {0 0 0 1} plane – ABAB… stacking
PHYSICAL METALLURGY MSE2019
22
Crystal Structure of Metal
PHYSICAL METALLURGY MSE2019
23
Crystallographic Indices
PHYSICAL METALLURGY MSE2019
24
Miller Indices
• Directions
• Planes
PHYSICAL METALLURGY MSE2019
25
Crystallographic Indices for HCP
• Weber symbols for directions
Miller Indices: 𝑈 𝑉 𝑊
Weber symbols : 𝑢 𝑣 𝑡 𝑤
𝑢
𝑣
𝑡
𝑤
1⁄3 2𝑈 𝑉
1⁄3 2𝑉 𝑈
1⁄3 𝑈 𝑉
𝑊
𝑈
𝑉
𝑊
𝑢 𝑡
𝑣 𝑡
𝑤
PHYSICAL METALLURGY MSE2019
26
Crystallographic Indices for HCP
• Miller-Bravais indices for planes
Miller Indices: ℎ 𝑘 𝑙
Miller-Bravais indices :
ℎ𝑘𝑖𝑙
𝑖
ℎ
𝑘
PHYSICAL METALLURGY MSE2019
27
Planes of a Zone
• Those planes that mutually intersect along a common direction
form the planes of a zone, and the line of intersection is called the
zone axis.
[ 𝑢 𝑣 𝑤]
Zone Axis: [𝑢 𝑣 𝑤]
Planes of a Zone: ℎ 𝑘 𝑙
ℎ𝑢 + 𝑘𝑣 + 𝑙𝑤 = 0
This equation is true for cubic, tetragonal
and orthorhombic systems and all other
crystal systems.
(ℎ 𝑘 𝑙)
PHYSICAL METALLURGY MSE2019
28
Planes of a Zone: Proof
PHYSICAL METALLURGY MSE2019
29
Planes of a Zone
• The planes of zone are all parallel to the zone axis, and their
normals from any point must be coplanar.
[ 𝑢 𝑣 𝑤]
1. Zone axis
(ℎ 𝑘 𝑙 )
2. A Plane lying on two zones
3. Additional rule
(ℎ 𝑘 𝑙 )
PHYSICAL METALLURGY MSE2019
30
Planes of a Zone for HCP crystal
[ 𝑢 𝑣 𝑡 𝑤]
(ℎ 𝑘 𝑖 𝑙)
PHYSICAL METALLURGY MSE2019
31
PHYSICAL METALLURGY MSE2019
32
Plane Family
Crystal Structure
PHYSICAL METALLURGY MSE2019
33
Lattice
• Crystal lattice is a periodic structure repeated by lattice points.
• All lattice points have the same environment in the same
orientation and are indistinguishable from one another.
• Any lattice point is related to any other by a simple lattice
translation, named lattice translation vector.
PHYSICAL METALLURGY MSE2019
34
Lattice Point & Cell
PHYSICAL METALLURGY MSE2019
35
Unit Cell & Primitive Cell
• Unit cell of a crystal structure is the smallest group of atoms
possessing the symmetry of the crystal which, when repeated in
all directions, will develop the crystal lattice.
• The possibilities of repeat entity are actually infinite.
• Primitive cell is a repeat entity containing only one lattice point.
PHYSICAL METALLURGY MSE2019
36
7 Crystal Systems
• Crystal system is the cell revealing a combination of the rotation
symmetry and geometry of lattice of crystal
PHYSICAL METALLURGY MSE2019
37
PHYSICAL METALLURGY MSE2019
38
7 Crystal Systems
7 Crystal Systems
螢石
鉬鉛礦
坦桑石
藍銅礦
天河石
翡翠
紅紋石
PHYSICAL METALLURGY MSE2019
39
14 Bravais Lattices
• Bravais lattice is a combination of the crystal system with one of
the centering types, which identify the locations of lattice points
in the unit cell.
• Primitive (P)
• Base-centered (A, B, or C)
• Body-centered (I)
• Face-centered (F)
• Rhombohedrally-centered (R): lattice points on the cell
corners with two additional points along the longest body
diagonal (only applies for the trigonal crystal).
PHYSICAL METALLURGY MSE2019
40
Trigonal
Rhombohedral
PHYSICAL METALLURGY MSE2019
41
PHYSICAL METALLURGY MSE2019
42
Examples
Crystal Structure & Motif
• Motif defines the position of every atom related to the coordinate
of lattice point.
• Crystal structure: Lattice Point ⊗ Motif
Iron
a = 2.87 Å
PHYSICAL METALLURGY MSE2019
43
Examples
Graphite
Diamond
a = 3.56 Å
PHYSICAL METALLURGY MSE2019
44
Stereographic Projection Diagram
PHYSICAL METALLURGY MSE2019
45
Moon Projection
Source: NASA
PHYSICAL METALLURGY MSE2019
46
Projection Maps
Gnomonic
Stereographic
Orthographic
PHYSICAL METALLURGY MSE2019
47
Source: C. Delman and G. Galperin, Mathematics Magazine, 2003
Stereographic Projection
• Stereographic projection preserves angles and takes circles to
circles or lines.
PHYSICAL METALLURGY MSE2019
48
Stereographic Projection
PHYSICAL METALLURGY MSE2019
49
Stereographic Project of Crystal
PHYSICAL METALLURGY MSE2019
50
Direction (Pole) and Plane
• Planes are plotted as great circle lines, and directions are plotted
as points.
• Planes and directions in the forward hemisphere are drawn as
solid lines and solid dots respectively; while those in the rear
hemisphere are plotted as dotted lines and circled dots.
Pole
Great
Circle
plane
PHYSICAL METALLURGY MSE2019
51
PHYSICAL METALLURGY MSE2019
52
Examples
Planes of a Zone
PHYSICAL METALLURGY MSE2019
53
Stereographic Projections
PHYSICAL METALLURGY MSE2019
54
Wulff Net (2°)
PHYSICAL METALLURGY MSE2019
55
Wulff Net
• All meridians (longitude lines), including the basic circle, are great
circles.
• The equator is a great circle. All other latitude lines are small
circles.
• The angular distance between points representing directions in
space can be measured on the Wulff net only when the points lie
on the same great circle.
• Pole of a great circle is defined as the direction normal to the
plane of the great circle.
PHYSICAL METALLURGY MSE2019
56
Examples
PHYSICAL METALLURGY MSE2019
57
Wulff Net-Rotation
• The two basic rotations can be made when the Wulff net is used.
All possible rotations of a crystal in three dimensions can be
duplicated by using these rotations on a stereographic projection.
(1) Rotation about an axis in the center of the Wulff net.
(2) Rotation about the north-south axis of Wulff net
PHYSICAL METALLURGY MSE2019
58
Wulff Net-Rotation
PHYSICAL METALLURGY MSE2019
59
Wulff Net-Rotation
PHYSICAL METALLURGY MSE2019
60
Quasicrystal & Anisotropic Materials
PHYSICAL METALLURGY MSE2019
61
PHYSICAL METALLURGY MSE2019
62
Symmetry
Three-fold symmetry
Four-fold symmetry
Two-fold symmetry
Why is there no five-fold symmetry?
ma
a
a
α
α
a
PHYSICAL METALLURGY MSE2019
Quasicrystal
63
Source: D. Shechtman et al., Physical Review Letters, 1984
Source: T. Seki & E. Abe et al., Microscopy, 2015
• A quasicrystal is a structure that is ordered but not periodic.
• They often exhibit symmetries that are forbidden in conventional
crystallography, such as fivefold or tenfold symmetry.
PHYSICAL METALLURGY MSE2019
64
Isotropic & Anisotropic Materials
• Isotropy : The properties of a material are independent of its
materials direction.
• Anisotropy : The properties of a material are dependent on its
materials direction.
• Basically, a single crystal is not isotropic, but anisotropic.
• When the grains in a polycrystalline material are randomly
arranged, the material is expected to be isotropy.
PHYSICAL METALLURGY MSE2019
65
Crystalline & Amorphous
Crystalline
Amorphous
Arrangement
The constituent particles are
arranged in a regular order
The constituent particles shows
disordered arrangement
Ordering
Exhibit both long range and
short range order
Exhibit only short range order
Melting Point
Sharp melting point
Melt over a range of
temperature
Heat of Fusion
Definite heat of fusion
Not a definite heat of fusion
Cleavage
Property
A clean cleavage
An irregular cleavage
Physical
Property
Anisotropic
Isotropic
Notice
True solid
Pseudosolid
PHYSICAL METALLURGY MSE2019
66
Electrical Steel (Si Steel)
PHYSICAL METALLURGY MSE2019
67
Electrical Steel (Si Steel)
PHYSICAL METALLURGY MSE2019
68
Advanced High-Strength Steel
Inverse Pole Figure
RD-BCC
ND
RD-FCC
RD
TD
TD-BCC
TD-FCC
PHYSICAL METALLURGY MSE2019
69
Advanced High-Strength Steel
BCC (0 0 1) Pole Figure
PHYSICAL METALLURGY MSE2019
70
Advanced High-Strength Steel
FCC (1 1 1) Pole Figure
PHYSICAL METALLURGY MSE2019
71
Advanced High-Strength Steel
PHYSICAL METALLURGY MSE2019
72
Any Question?
PHYSICAL METALLURGY MSE2019
73