1
Surveying Lab Report - Horizontal Distance
Armando Morales, Lizet Rosas, Fahira Ramadhani, Marcellus Mujica, Kristine Rigon
CMGT 201 - Surveying
Dr. Roya Nasimi
California State University, East Bay
Spring 2026 - February 20th, 2026
2
Table Of Contents
Surveying Lab Report - Horizontal Distance.............................................................................1
Table Of Contents........................................................................................................................ 2
Part 1: Determining Our Pace Length........................................................................................3
Purpose................................................................................................................................... 3
Procedure................................................................................................................................ 3
Results.....................................................................................................................................4
Table 1.1 Average Pace Length Calculation...................................................................... 4
Part 2: Measuring a Distance Using Our Three Methods.........................................................5
Purpose................................................................................................................................... 5
Procedure................................................................................................................................ 5
Results.....................................................................................................................................5
Table 1.2 Measuring a Distance using a Tape Measure, Pacing, and Stadia Method....... 6
3
Part 1: Determining Our Pace Length
Purpose
The purpose of this lab is to determine the average step length of each group member,
evaluate the uncertainty introduced when distance is measured by counting steps, and gain
experience using this step-counting measurement procedure. Determining our pace length is vital
for this experiment as we will later use our pace length as a distance measurement.
Procedure
We first found a suitable area where we could measure out 300 feet on level ground with
our tape measure. After measuring out 300 feet each member then walked the 300 feet and
counted their steps. We found pace length by taking our known 300 feet and dividing that by the
number of steps taken to walk that 300 feet in our natural stride and pace and then repeated this
for four trials. We then took our data and found the average pace length by taking the sum of all
the number of steps for the four rounds and dividing them by four. This gives us the average pace
length for an individual and will help give us a more accurate pace length.. We then repeated that
process for the rest of the lab partners.
4
Results
Name
Armando
Marcello
Lizet
Fahira
Kristine
Quantity
First Round
Second
Round
Third Round
Fourth
Round
Number of
Steps
141
124
135
134
Pace Length
2.13
2.42
2.22
2.23
Number of
Steps
121
122
120
122
Pace Length
2.48
2.45
2.5
2.45
Number of
Steps
138
132
133
135
Pace Length
2.17
2.27
2.26
2.22
Number of
Steps
137
142
142
139
Pace Length
2.19
2.11
2.11
2.16
Number of
Steps
126
125
127
126
Pace Length
2.38
2.4
2.36
2.38
Table 1.1 Average Pace Length Calculation
Pace Length
(avg)
2.24
2.47
2.23
2.14
2.38
5
Part 2: Measuring a Distance Using Our Three Methods
Purpose
The purpose of this experiment was to measure the same distance using three different
methods using tape measure, pacing, and the stadia method and compare the results to determine
which method was most accurate and consistent.
Procedure
First, every single member chose a random distance and marked it using a flag. Then,
using a tape measure we recorded the distance and used that value as our reference measurement.
Next, we measured the same distance by pacing it. Every member walked their respective
distance and counted their steps doing so. After we found the steps taken, we took our previously
calculated average pace length and multiplied it by the steps we took to find the total distance.
Finally, we measured the distance using the stadia method by taking the necessary readings and
calculating the distance from the stadia intercept using a leveling rod and telescope. We recorded
the distance from all three methods and compared them.
Results
The tape measure provided the baseline distance, and the pacing and stadia measurements
were compared to it. Any differences between the three measurements showed the accuracy and
possible error of each method, with the method closest to the tape measure considered the most
accurate.
6
Distance
(ft^2) (Pacing
* Avg Pace
Length)
Stadia (ft)
Name
Tape Measure
(ft)
Pacing
Avg Pace
Length
Armando
51.6
26
2.24
58.24
57
Fahira
41.7
20
2.14
42.8
47
Lizet
61.2
30
2.23
66.9
63
Marcello
68
28
2.47
69.16
71
Kristine
28.8
12
2.38
28
25
Table 1.2 Measuring a Distance using a Tape Measure, Pacing, and Stadia Method