Contents I The Geometry of Space 1 1 Three-Dimensional Coordinate Systems 1 2 Vector Operations 3 3 Equations of lines and planes 5 4 Equations of Cylinders and Quadric Surfaces 7 5 Directional Derivatives, the Gradient 8 6 Midterm Review 9 –i– PART The Geometry of Space I Section 1 Three-Dimensional Coordinate Systems Transition from single to multivariable calculus. In single variable calculus, the calculation focused on areas and volumes of highly symmetric solids (those of revolution). Now the focus would be on more irregular 3D shapes. For this transition to take place, we would first need to understand: • Functions of 2 variables: f : R2 → R, • The volume under a surface, or how to calculate a function f : R2 → R, and • Differentiating such functions in a certain direction (because there are more degrees of freedom). 3D coordinate systems and distance. The three-dimensional Euclidean space R3 is the collection of ordered triples of real numbers (x, y, z). Definition 1 Mathematical Notations. We write p ∈ R3 to denote that p is a point of R3 . Given points p1 , p2 ∈ R3 , we will write |p1 p2 | as the distance between the two points. We calculate the distance |p1 p2 | using the Pythagorean system. Between the two points on a two-dimensional plane the calculation formula is: p |p1 p2 | = (x2 − x1 )2 + (y2 − y1 )2 . (1.1) The same can be defined with the three dimensional plane: p |p1 p2 | = (x2 − x1 )2 + (y2 − y1 )2 + (z2 − z1 )2 . (1.2) This can be proved easily by employing the Pythagorean theorem twice. Consider p1 = (1, 1, 0), p2 = (1, 0, 1), p3 = (0, 1, 1). Calculate the distances between these points, and prove that they form an equilateral triangle. Solution. We could calculate the distances as follows: p √ |p1 p2 | = |p2 p3 | = |p3 p1 | = (1 − 1)2 + (0 − 1)2 + (1 − 0)2 = 2. (1.3) Example It is evident that, since the three sides are of the same length, the triangle defined by p1 , p2 , p3 is equilateral. This could also be used to define a sphere. From the definition of the circle of radius r centered at (p, q) (x − p)2 + (y − q)2 = r2 , (1.4) We can generalize the definition of circle: 1 2 Three-Dimensional Coordinate Systems Definition 2 Let p = (a, b, c) and r > 0 a real number. The sphere of radius r centered at p is the collection of points in R3 with distance r from p. This could be expressed by the formula definition: 2 |pq| = r ⇒ |pq| = r2 , (1.5) or, upon plugging in 1.2, (x − a)2 + (y − b)2 + (z − c)2 = r2 . (1.6) Vectors. A vector is a directed line segment with both length and direction. For two → points p1 = (x1 , y1 , z1 ), p2 (x2 , y2 , z2 ), the vector − p− 1 p2 is the directed line connecting the two points, pointing from p1 to p2 . However there is a more "official" but separate definition: Definition 3 A vector is a point of R3 . The notation would be: − → p− 1 p2 = ⟨x2 − x1 , y2 − y1 , z2 − z1 ⟩ . (1.7) Discussion. (28AUG25) Instructor: Metehan Aksay, aksay@usc.edu Question 1 (a) Verify that three points P = (2, 4, 0), Q = (4, 0, 2), R = (6, 2, −2) define the corners of an equilateral triangle. Solution. To prove the proposition we need to calculate the distance for these three points, and if the distances are equal to each other, it is easily verified that the triangle is equilateral. Thus, p √ |P Q| = |QR| = |P R| = 22 + 22 + 42 = 24. (1.8) Because all sides are equal it is evident that the triangle is equilateral. (b) Find the smallest sphere which passes through the three points P, Q, R. Solution. Because the sphere passes through the three points, for it to be the smallest the center of the sphere would need to be within the triangle itself. Thus it is intuitive that the center of the sphere O would be the geometric center of the triangle, and the radius would be the distance between O and any of the three points. Thus, the center could be found simply. Because we have an equilateral triangle in a Cartesian coordinate system, the center could be calculated by simply adding the coordinates up and dividing them by 3. 2+4+6 4+0+2 0+2−2 O= , , = (4, 2, 0). (1.9) 3 3 3 The radius, or distance between the center and one of the points given, would be: p √ |OP | = (2 − 4)2 + (4 − 2)2 + (0 − 0)2 = 2 2. (1.10) 3 Vector Operations Thus from the definition of the circle (1.6), the equation of the sphere would be: (x − 4)2 + (y − 2)2 + z 2 = 8. (1.11) The next question is an excerpt from Stewart’s textbook (Section 10.1). Question 2 Find the equation of the set of all points equidistant from the points A(−1, 5, 3) and B(6, 2, −2). Describe the set. Solution. If we have an arbitrary point P(x, y, z), the equation needed would be: |AP | = |BP |. (1.12) Plugging in the definition 1.2: p p (x + 1)2 + (y + 2)2 + (z − 3)2 = (x − 6)2 + (y − 2)2 + (z + 2)2 (x + 1)2 + (y + 2)2 + (z − 3)2 = (x − 6)2 + (y − 2)2 + (z + 2)2 (1.13) 14x − 6y − 10z = 9. It is evident that this equation represents a plane. The set of points is a plane. We now deal with the problems of distances between spheres. Question 3 Find the distance between spheres x2 +y 2 +y 2 = 4 and x2 +y 2 +z 2 = 4x+4y +4z −11. Solution. It is evident that the first sphere is centered at the origin with a radius of 2, and through simple algebraic transformation the second sphere is: x2 − 4x + 4 + y 2 − 4y + 4 + z 2 − 4z + 4 = −11 + 4 · 3 (x − 2)2 + (y − 2)2 + (z − 2)2 = 1. (1.14) The sphere is centered at (2, 2, 2) with a radius of 1. The distance would be the shortest distance between any points, calculated through subtracting the sum of their radii from the distance between their centers. p √ d = 22 + 22 + 22 − 2 − 1 = 2 3 − 3. (1.15) This is evidently positive, so the spheres do not touch. Section 2 Vector Operations Basic operation of vectors. Let v1 = ⟨a1 , b1 , c1 ⟩ , v2 = ⟨a2 , b2 , c2 ⟩ be vectors. Let r be a real number, (a scalar). Then, Definition 4 Scalar multiplication can be defined as: r · v1 = ⟨ra1 , rb1 , rc1 ⟩ . (2.1) v1 + v2 = ⟨a1 + a2 , b1 + b2 , c1 + c2 ⟩ . (2.2) Addition of vectors are: 4 Vector Operations The length of a vector is defined evidently as: q |v1 | = a21 + a22 + a23 . (2.3) Notation: the standard unit vectors. Unit vectors are vectors of length 1 parallel to the three axis. That is, î = ⟨1, 0, 0⟩ , ĵ = ⟨0, 1, 0⟩ , k̂ = ⟨0, 0, 1⟩ . (2.4) This is especially useful in certain situations. Any expression using the base vector notation is unique. The Multiplication of vectors. The dot product is given by the length of the two vectors weighted by the angle between them, while the cross product is a vector orthogonal to the plane spanned by the two vectors. The length is the area of the parallelogram determined by the two vectors. That is, Definition 5 The dot product for the two vectors given is defined as: v1 · v2 = a1 a2 + b1 b2 + c1 c2 (2.5) î ĵ k̂ v1 × v2 = a1 b1 c1 a2 b2 c2 (2.6) The cross product is, Question 4 Example in Chemistry: Calculating Bond Angles. Methane (CH4 ) has one carbon and four hydrogen atoms. The hydrogen atoms form the vertices of a regular tetrahedron, and the carbon is at the geometric center. Calculate the bond angles of the H − C − H bonds. Solution. We pick an arbitrary size of 1 for each side. Put the hydrogen atoms at h1 = (1, 0, 0), h2 = (0, 1, 0), h3 = (0, 0, 1), and it is evident that for the tetrahedron to be regular the fourth point must be at h4 = (1, 1, 1). The carbon is the center of mass, which is: 1 1 1 1 C = ⟨1 + 1, 1 + 1, 1 + 1⟩ = , , . (2.7) 4 2 2 2 Thus we know the vectors going from each hydrogen atom to the carbon atom: −−→ 1 1 1 1 1 1 v1 = Ch1 = 1 − , − , − = ,− ,− , 2 2 2 2 2 2 (2.8) −−→ 1 1 1 v2 = Ch2 = − , , − . 2 2 2 5 Equations of lines and planes Thus the cosine of the angle would be: cos θ = = v 1 · v2 |v1 | · |v2 | 1 1 1 2 −2 + −2 1 2 + √ √ 3 3 · 2 2 − 12 − 21 (2.9) 1 =− . 3 A simple calculation of the inverse cosine would reveal: θ ≈ 109.5◦ . (2.10) (Another example in physics is calculation of torque.) Mathematically there is the volume of the parallelepiped, where three line segments emanating from the same point in R3 form this shape. It can be intuitively considered as a three-dimensional parallelogram and each side is a parallelogram itself. The volume of the parallelepiped, then, would be: |u · (v × w)|. (2.11) Section 3 Equations of lines and planes The equations of lines and planes are intuitive. We first look at any line that is determined by the origin and an arbitrary point p = (a, b, c). Because for any two vectors to be parallel, the points on the line are just multiples of (a, b, c): (x, y, z) = (ta, tb, tc). (3.1) If the starting point is not at the origin it is easy to transform the coordinate system. Thus, for another starting point p0 = (x0 , y0 , z0 ), we have the equation for general lines: ⟨x, y, z⟩ = ⟨x0 + at, y0 + bt, z0 + ct⟩ . (3.2) If a, b, c are all nonzero values, the equation can be transformed into an implicit equation. Because x − x0 y − y0 z − z0 t= = = (3.3) a b c We have the implicit, or symmetrical equation of a straight line: x − x0 y − y0 z − z0 = = . a b c (3.4) Now we move on to the equation of planes. For any three given non-colinear points p1 = (x1 , y1 , z1 ), p2 = (x2 , y2 , z2 ), p0 = (x0 , y0 , z0 ), we can have a vector equation that uses the point p0 as an origin, and any two arbitrary multiple of the vectors v1 = − → −−→ p− 0 p1 , v2 = p0 p2 . Thus, any vector representing a point in the plane would be: ⟨x, y, z⟩ = ⟨x0 , y0 , z0 ⟩ + sv1 + tv2 . (s, t ∈ R) (3.5) An alternative way of deduction would be using the normal vector. For any point q to be on the plane determined by p0 , p1 , p2 , the vector − p→ 0 q should be orthogonal to the 6 Equations of lines and planes cross product v1 × v2 , or the normal vector of the plane. Said differently: (v1 × v2 ) · (q − p0 ) = 0 (v1 × v2 ) · q = (v1 × v2 ) · p0 . (3.6) If we define v1 × v2 = ⟨a, b, c⟩, and q = (x, y, z): ⟨a, b, c⟩ · ⟨x − x0 , y − y0 , z − z0 ⟩ (3.7) a(x − x0 ) + b(y − y0 ) + c(z − z0 ) = 0. (3.8) Or, in the final form This is called the scalar equation for a plane through (x0 , y0 , z0 ) with a normal vector n = ⟨a, b, c⟩. Now we look at an example: Question 5 What is the equation of the plane passing through p0 = (1, 0, 0), p1 = (0, 1, 0), p2 = (0, 0, 1)? Solution. The orthogonal direction could be found through the calculation of v1 and v2 . The equations are: v1 = ⟨−1, 1, 0⟩ (3.9) v2 = ⟨−1, 0, 1⟩ Now we find the orthogonal vector, and we would need to take the cross product: v1 × v2 = ⟨1, 1, 1⟩ . (3.10) Plugging in with 3.8, we get the final equation for the plane: x + y + z = 1. (3.11) The graph depicting this would be: z x with the "triangle" extending infinitely. y 7 Equations of Cylinders and Quadric Surfaces Section 4 Equations of Cylinders and Quadric Surfaces Introduction. What are the solutions to z = x2 ? The solution would be a parabola shape extended in the y direction: because y is not defined there is no limit to its value, shown below. z y x From here we can get a general principle: to plot f (x, z) = 0 in R3 , the graph would look like a copy of the solutions in a plane, placed at every point in the y-axis. Thus for an "infinitely long" cylinder, we can give examples of x2 + y 2 = 1 and y 2 + z 2 = 1: z z y x y x The general quadric surface is defined as such: Definition 6 A quadric surface in R3 is the set of solutions to a degree 2 polynomial in x, y, z: Ax2 + by 2 + Cz 2 + Dxy + Eyz + F xz + Gx + Hy + Iz + J = 0. (4.1) Up to rotation and translation,all quadric surfaces look like the solutions to Ax2 + By 2 + Cz 2 + J = 0 or Ax2 + By 2 + Iz = 0. (4.2) Ellipsoids. The ellipsoid is a three-dimensional sphere-like body (imagine a pill) that can be defined as: x2 y2 z2 + 2 + 2 = 1. (4.3) 2 a b c 8 Directional Derivatives, the Gradient Cones. The cone can be expressed as: x2 y2 z2 + = . a2 b2 c2 (4.4) Elliptic Paraboloids. By transforming the expression for cones we get: x2 y2 z + = . 2 2 a b c (4.5) Hyperbolic Paraboloid. If we tweak part of the equation for the elliptic paraboloid we can get x2 y2 z (4.6) − 2 = . 2 a b c One-sheeted hyperboloids. The equation for a one-sheeted hyperboloid is: x2 y2 z2 + − = 1. a2 b2 c2 (4.7) How to determine what quadric a generic equation is to complete the square. Disregard the Wave equation. From Clairaut’s theorem, we have: If f is defined on a disk D and both fxy and fyx are continuous on D, we have: fxy = fyx (4.8) ⇒ (4.9) Wave equation- a ∈ R, u(x, t) 2 ∂2u 2∂ u = a ∂t2 ∂x2 u(x, t) = sin(x − at). Section 5 Directional Derivatives, the Gradient Revision. The topics of the midterm: • The dot and cross products of vectors. (dot product, cross product, right-hand rule, geometric interpretations.) • The equations of lines and planes: the implicit equations, parametric equations, evaluating equations of planes through vectors. • Clairault’s Theorem. • Tangent planes. The tangent plane to f (x, y) at (x0 , y0 , z0 ) is z − z0 fx (x0 , y0 )(x − x0 ) + fy (x0 , y0 )(y − y0 ). • Linear Approximation. L(x, y) = f (x0 , y0 )+fx (x0 , y0 )(x−x0 )+fy (x0 , y0 )(y −y0 ). Section 6 Midterm Review 9 Midterm Review Example √ f (x, y, z) = xy 2 z 3 + y arcsin(x z). Find fxzyyzz . Solution. From Clairaut’s Theorem: fxzyyzz = fyyxzzz = fzzz (2z 3 ) = 12. (6.1)
0
You can add this document to your study collection(s)
Sign in Available only to authorized usersYou can add this document to your saved list
Sign in Available only to authorized users(For complaints, use another form )