BSE318 Lighting Technology
Week 1
Basic lighting quantities and units
Minchen(Tommy) Wei
Dept. of Building Services Engineering
The Hong Kong Polytechnic University
Email: minchen.wei@polyu.edu.hk
Office: ZN821
1
Learning Outcomes
1. Define lighting quantities and terms
(definition, units, symbol,
measurement)
2. Describe the relationship between
lighting units and perform calculations
2
What is light?
• Light is a type of electromagnetic
radiation, which is capable of exciting the
human visual system
• Radiant Energy vs. Radiant Power
• Radiant Power (Radiant Flux): the time
rate of flow of radiant energy
3
Luminous Flux
• Total amount of light
• Luminous Flux: the time rate of flow of
radiant energy, evaluated in terms of a
standard observer
• Symbol: Φ
• Unit: lumen (lm)
4
Luminous Flux
5
Energy efficiency of a lamp
• Which one is more energy efficient?
• Lamp A: 1000 lm, 50 W
• Lamp B: 1200 lm, 80 W
• Energy efficiency is evaluated based on
luminous efficacy: the ratio of the total
luminous flux to power consumption
• Symbol: ŋ
• Unit: lumens/watt (lm/W)
6
7
Luminous Intensity
• Concentration of light in a particular
direction
• Luminous intensity: the luminous flux per
unit solid angle in the direction of
question
• Symbol: I
• Unit: candela (cd)
8
Solid Angle
• A 3D angle that subtends a point
• 2D: Plane angle
• 3D: Solid angle
• Symbol: ω
• Unit: steradian (Sr)
Plane angle:
Radian
Solid angle:
steradian
9
Solid Angle
• 1 Sr: the solid angle subtended at the
center of a sphere (R = 1 m) by a unit
surface area (A= 1 m2)
• Solid angle for a sphere: 4π
• Solid angle for a hemisphere: 2π
10
Example
• What is the average luminous intensity
for this light bulb?
11
Luminous Intensity
• In reality, the luminous intensity applies
to a particular direction
12
Illuminance
• Areal density of light on a surface
• Illuminance: the areal density of luminous
flux arriving on a surface
• Symbol: E
• Unit:
•1
luxlm
(lx): /lumen/m
ft2 2=
10.76 lm / m2
• Footcandle (fc): lumen/ft2
13
Illuminance
• Light may arrive from a single direction or
from many directions
14
Exitance
• Areal density of light leaving a surface
• Exitance: the areal density of luminous
flux leaving a surface
• Symbol: M
• Unit:
• lumen/m2
• lumen/ft2
• No lx or fc!!!
15
Exitance
• Leaving: reflection or transmission
16
Exitance
• Exitance is generally reserved for
Lambertian surfaces (perfectly
diffuse surfaces, matte surfaces),
which has a cos luminous intensity
distribution. This surface type is
assumed in most lighting
calculations.
17
Lambertian surface
IƟ = cosƟ In
18
Luminance
• Our eyes can only see one direction!
• Concentration of light directed towards a
direction, which corresponds to the
lighting quantity
that we actually
see!
off
M
M
through
=
=
=
=
on
E
on
E
19
Luminance
• Luminance: density of luminous intensity per
unit apparent (projected) area
• Apparent (projected) area: the area we see
• Symbol: L
I
I
=
• Unit: cd/m2 or cd/ft2 L =
Ap
A cos v
I
v
A
20
Luminance
• Luminance for a Lambertian surface
I
v
A
L=M/
These relationships hold only for
a Lambertian Surface.
21
Basic Lighting Quantities
symbols
Units
• Luminous Flux
• Luminous Intensity
• Illuminance
• Exitance
• Luminance
• Reflectance
• Transmittance
22
Lighting Measurements
• Luminous Flux
• Luminous Intensity
• Illuminance
• Exitance
• Luminance
23
How to measure
reflectance/transmittance for a
Lambertian surface?
24