RECTILINEAR KINEMATICS:
CONTINIOUS MOTION (Section 12.2)
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE
Given: A particle travels along a straight line to the right
with a velocity of v = ( 4 t – 3 t2 ) m/s where t is
in seconds. Also, s = 0 when t = 0.
Find: The position and acceleration of the particle
when t = 4 s.
Plan: Establish the positive coordinate, s, in the direction the
particle is traveling. Since the velocity is given as a
function of time, take a derivative of it to calculate the
acceleration. Conversely, integrate the velocity
function to calculate the position.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE (continued)
Solution:
1) Take a derivative of the velocity to determine the acceleration.
a = dv / dt = d(4 t – 3 t2) / dt = 4 – 6 t
a = – 20 m/s2 (or in the direction) when t = 4 s
2) Calculate the distance traveled in 4s by integrating the
velocity using so = 0:
s
t
v = ds / dt ds = v dt ds = (4 t – 3 t2) dt
so
o
s – so = 2 t2 – t3
s – 0 = 2(4)2 – (4)3 s = – 32 m (or )
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING
Given: A sandbag is dropped from a balloon ascending
vertically at a constant speed of 6 m/s.
The bag is released with the same upward velocity of
6 m/s at t = 0 s and hits the ground when t = 8 s.
Find: The speed of the bag as it hits the ground and the altitude
of the balloon at this instant.
Plan: The sandbag is experiencing a constant downward
acceleration of 9.81 m/s2 due to gravity. Apply the
formulas for constant acceleration, with ac = - 9.81 m/s2.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING (continued)
Solution:
The bag is released when t = 0 s and hits the ground when
t = 8 s.
Calculate the distance using a position equation.
+ sbag = (sbag )o + (vbag)o t + (1/2) ac t2
sbag = 0 + (-6) (8) + 0.5 (9.81) (8)2 = 265.9 m
During t = 8 s, the balloon rises
+ sballoon = (vballoon) t = 6 (8) = 48 m
Therefore, altitude is of the balloon is (sbag + sballoon).
Altitude = 265.9 + 48 = 313.9 = 314 m.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING (continued)
Calculate the velocity when t = 8 s, by applying a velocity
equation.
+ vbag = (vbag )o + ac t
vbag = -6 + (9.81) 8 = 72.5 m/s
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
ERRATIC MOTION (Section 12.3)
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE
Given: The v-t graph for a dragster moving along a straight road.
Find: The a-t graph and s-t graph over the time interval shown.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE (continued)
Solution: The a-t graph can be constructed by finding the slope
of the v-t graph at key points. What are those?
when 0 < t < 5 s; a0-5 = dv/dt = d(30t)/dt = 30 m/s2
when 5 < t < 15 s; a5-15 = dv/dt = d(-15t+225)/dt = -15 m/s2
a(m/s2)
30
-15
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
a-t graph
5
15 t(s)
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE (continued)
Now integrate the v - t graph to build the s – t graph.
when 0 < t < 5 s; s = v dt = [15 t2 ] t = 15 t2 m
0
when 5 < t < 15 s; s − 15 (52) = v dt = [(-15) (1/2) t 2 + 225 t]
t
5
s = - 7.5 t 2 + 225 t − 562.5 m
s(m)
s-t graph
1125
-7.5 t2 + 225 t − 562.5
375
t(s)
15t2
5
15
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING I
Given: The v-t graph shown.
Find: The a-t graph, average
speed, and distance
traveled for the 0 - 80 s
interval.
Plan: Find slopes of the v-t curve and draw the a-t graph.
Find the area under the curve. It is the distance traveled.
Finally, calculate average speed (using basic definitions!).
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING I (continued)
Solution:
Find the a–t graph.
For 0 ≤ t ≤ 40
a = dv/dt = 0 m/s²
For 40 ≤ t ≤ 80 a = dv/dt = -10 / 40 = -0.25 m/s²
a(m/s²)
0
a-t graph
40
80
-0.25
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
t(s)
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING I (continued)
Now find the distance traveled:
s0-40 = v dt = 10 dt = 10 (40) = 400 m
s40-80 = v dt
= (20 − 0.25 t) dt
80
2
= [ 20 t -0.25 (1/2) t ]40 = 200 m
s0-90 = 400 + 200 = 600 m
vavg(0-90) = total distance / time
v = 10
= 600 / 80
= 7.5 m/s
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING II
Given: The v-t graph shown.
Find: The a-t graph and
distance traveled for
the 0 - 15 s interval.
Plan: Find slopes of the v-t curve and draw the a-t graph.
Find the area under the curve. It is the distance traveled.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING II (continued)
Solution:
Find the a–t graph:
For 0 ≤ t ≤ 4
a = dv/dt = 1.25 m/s²
For 4 ≤ t ≤ 10
a = dv/dt = 0 m/s²
For 10 ≤ t ≤ 15
a = dv/dt = -1 m/s²
a(m/s²)
a-t graph
1.25
4
10
15 t(s)
-1
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING II (continued)
Now find the distance traveled:
s0-4 = v dt
4
2
= [ (1.25) (1/2) t ]0 =
10 m
s4-10 = v dt = [ 5 t ] 4 = 30 m
10
s10-15 = v dt
15
2
= [ - (1/2) t + 15 t]10 =
12.5 m
s0-15= 10 + 30 + 12.5 = 52.5 m
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GENERAL CURVILINEAR MOTION
(Section 12.4)
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE
Given: The box slides down the slope described by the
equation y = (0.05x2) m, where x is in meters.
vx = -3 m/s, ax = -1.5 m/s2 at x = 5 m.
Find: The y components of the velocity and the acceleration
of the box at at x = 5 m.
Plan: Note that the particle’s velocity can be found by taking
the first time derivative of the path’s equation. And the
acceleration can be found by taking the second time
derivative of the path’s equation.
Take a derivative of the position to find the component
of the velocity and the acceleration.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE (continued)
Solution:
Find the y-component of velocity by taking a time
derivative of the position y = (0.05x2)
y = 2 (0.05) x x = 0.1 x x
Find the acceleration component by taking a time
derivative of the velocity y
= 0.1 x x + 0.1 x x
y
Substituting the x-component of the acceleration, velocity
at x=5 into y and y.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE (continued)
Since x = vx = -3 m/s, x = ax = -1.5 m/s2 at x = 5 m
= 0.1 x x = 0.1 (5) (-3) = -1.5 m/s
y
y = 0.1 x x + 0.1 x x
= 0.1 (-3)2 + 0.1 (5) (-1.5)
= 0.9 – 0.75
= 0.15 m/s2
At x = 5 m
vy = – 1.5 m/s = 1.5 m/s
ay = 0.15 m/s2
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING
Given: The particle travels along the path y = 0.5 x2.
When t = 0, x = y = z = 0.
Find: The particle’s distance and the magnitude of its
acceleration when t = 1 s, if vx = (5 t) m/s, where t is in
seconds.
Plan:
1) Determine x and ax by integrating and differentiating
vx, respectively, using the initial conditions.
2) Find the y-component of velocity & acceleration by
taking a time derivative of the path.
3) Determine the magnitude of the acceleration &
position.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING (continued)
Solution:
1) x-components:
Velocity known as:
Position:
•
vx = x = (5 t ) m/s 5 m/s at t=1s
t
vxdt = (5t) dt x = 2.5 t2 2.5 m at t=1s
0
••
Acceleration: ax = x = d/dt (5 t) 5 m/s2 at t=1s
2) y-components:
3.125 m at t=1s
Position known as : y = 0.5 x2
•
•
•
Velocity: y = 0.5 (2) x x = x x
••
• •
••
Acceleration: ay = y = x x + x x
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
12.5 m/s at t=1s
37.5 m/s2 at t=1s
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING (continued)
3) The position vector and the acceleration vector are
Position vector: r = [ x i + y j ] m
where x= 2.5 m, y= 3.125 m
Magnitude: r = 2.52 + 3.1252 = 4.00 m
Acceleration vector: a = [ ax i + ay j] m/s2
where ax = 5 m/s2, ay = 37.5 m/s2
Magnitude: a = 52 + 37.52 = 37.8 m/s2
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
MOTION OF A PROJECTILE (Section 12.6)
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE I
Given: vA and θ
Find: Horizontal distance it
travels and vC.
Plan: Apply the kinematic
relations in x- and ydirections.
Solution: Using vAx = 10 cos 30 and vAy = 10 sin 30
We can write vx = 10 cos 30
vy = 10 sin 30 – (9.81) t
x = (10 cos 30) t
y = (10 sin 30) t – ½ (9.81) t2
Since y = 0 at C
0 = (10 sin 30) t – ½ (9.81) t2 t = 0, 1.019 s
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE I (continued)
Only the time of 1.019 s makes sense!
Velocity components at C are;
vCx = 10 cos 30
= 8.66 m/s →
vCy = 10 sin 30 – (9.81) (1.019)
= -5 m/s = 5 m/s
vC =
8.662 + (−5)2 =10 m/s
Horizontal distance the ball travels is;
x = (10 cos 30) t
x = (10 cos 30) 1.019 = 8.83 m
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE II
Given: Projectile is fired with vA=150 m/s
at point A.
Find: The horizontal distance it travels
(R) and the time in the air.
Plan: How will you proceed?
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE II
Given: Projectile is fired with vA=150 m/s
at point A.
Find: The horizontal distance it travels
(R) and the time in the air.
Plan: Establish a fixed x, y coordinate system (in this solution,
the origin of the coordinate system is placed at A).
Apply the kinematic relations in x- and y-directions.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE II (continued)
Solution:
1) Place the coordinate system at point A.
Then, write the equation for horizontal motion.
+ → xB = xA + vAx tAB
where xB = R, xA = 0, vAx = 150 (4/5) m/s
Range, R, will be R = 120 tAB
2) Now write a vertical motion equation. Use the distance equation.
+ yB = yA + vAy tAB – 0.5 g tAB2
where yB = – 150, yA = 0, and vAy = 150(3/5) m/s
We get the following equation: –150 = 90 tAB + 0.5 (– 9.81) tAB2
Solving for tAB first, tAB = 19.89 s.
Then, R = 120 tAB = 120 (19.89) = 2387 m
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING I
y
x
Given: A skier leaves the ski
jump ramp at A = 25o
and hits the slope at B.
Find: The skier’s initial speed vA.
Plan:
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING I
y
x
Given: A skier leaves the ski
jump ramp at A = 25o
and hits the slope at B.
Find: The skier’s initial speed vA.
Plan: Establish a fixed x,y coordinate system (in this solution,
the origin of the coordinate system is placed at A).
Apply the kinematic relations in x- and y-directions.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING I (continued)
Solution:
Motion in x-direction:
Using xB = xA + vox(tAB) (4/5)100 = 0 + vA (cos 25) tAB
tAB=
80
vA (cos 25)
88.27
vA
=
Motion in y-direction:
Using yB = yA + voy(tAB) – ½ g(tAB)2
88.27
88.27 }2
– 64 = 0 + vA(sin 25) {
} – ½ (9.81) {
vA
vA
vA = 19.42 m/s
tAB= (88.27 / 19.42) = 4.54 s
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING II
Given: The golf ball is struck
with a velocity of 24
m/s as shown.
y
x
Find: Distance d to where it
will land.
Plan:
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING II
Given: The golf ball is struck
with a velocity of 24
m/s as shown.
y
x
Find: Distance d to where it
will land.
Plan: Establish a fixed x, y coordinate system (in this solution,
the origin of the coordinate system is placed at A).
Apply the kinematic relations in x- and y-directions.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING II (continued)
Solution:
Motion in x-direction:
Using xB = xA + vox(tAB)
d cos10 = 0 + 24 (cos 55) tAB
y
x
tAB = 0.07154 d
Motion in y-direction:
Using yB = yA + voy(tAB) – ½ g(tAB)2
d sin10 = 0 + 24(sin 55)(0.07154 d) – ½ (9.81) (0.07154 d)2
0 = 1.2328 d – 0.025104 d2
d = 0, 49.1 m Only the non-zero answer is meaningful.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
NORMAL AND TANGENTIAL COMPONENTS
(Section 12.7)
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE I
Given: A car travels along the road
with a speed of v = (2s) m/s,
where s is in meters.
= 50 m
Find: The magnitudes of the car’s
acceleration at s = 10 m.
Plan:
1) Calculate the velocity when s = 10 m using v(s).
2) Calculate the tangential and normal components of
acceleration and then the magnitude of the
acceleration vector.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE I (continued)
Solution:
1) The velocity vector is v = v ut , where the magnitude is
given by v = (2s) m/s.
When s = 10 m: v = 20 m/s
.
2) The acceleration vector is a = atut + anun = vut + (v2/)un
Tangential component:
.
Since at = v = dv/dt = (dv/ds) (ds/dt) = v (dv/ds)
where v = 2s at = d(2s)/ds (v)= 2 v
At s = 10 m: at = 40 m/s2
Normal component: an = v2/
When s = 10 m: an = (20)2 / (50) = 8 m/s2
The magnitude of the acceleration is
a = (an )2 +(at )2 = 402 + 82 = 40.8 m/s2
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE II
Given: A boat travels around a
circular path, = 40 m, at a
speed that increases with
time, v = (0.0625 t2) m/s.
Find: The magnitudes of the boat’s
velocity and acceleration at
the instant t = 10 s.
Plan:
The boat starts from rest (v = 0 when t = 0).
1) Calculate the velocity at t = 10 s using v(t).
2) Calculate the tangential and normal components of
acceleration and then the magnitude of the
acceleration vector.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE II (continued)
Solution:
1) The velocity vector is v = v ut , where the magnitude is
given by v = (0.0625t2) m/s. At t = 10s:
v = 0.0625 t2 = 0.0625 (10)2 = 6.25 m/s
.
2) The acceleration vector is a = atut + anun = vut + (v2/)un.
.
Tangential component: at = v = d(.0625 t2 )/dt = 0.125 t m/s2
At t = 10s: at = 0.125t = 0.125(10) = 1.25 m/s2
Normal component: an = v2/ m/s2
At t = 10s: an = (6.25)2 / (40) = 0.9766 m/s2
The magnitude of the acceleration is
a = (an )2 +(at )2 = 1.252 + 0.97662 = 1.59 m/s2
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING I
Given: The train engine at E has a
speed of 20 m/s and an
acceleration of 14 m/s2 acting
in the direction shown.
at
an
Find: The rate of increase in the
train’s speed and the radius of
curvature of the path.
Plan:
1. Determine the tangential and normal components of the
acceleration.
2. Calculate vሶ from the tangential component of the
acceleration.
3. Calculate from the normal component of the acceleration.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING I (continued)
Solution:
1) Acceleration
Tangential component :
at =14 cos(75) = 3.623 m/s2
Normal component :
an = 14 sin(75) = 13.52 m/s2
2) The tangential component of acceleration is the rate of
increase of the train’s speed, so
at = vሶ = 3.62 m/s2.
3) The normal component of acceleration is
an = v2/ 13.52 = 202 /
= m
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING II
Given: Starting from rest, a bicyclist travels around a
horizontal circular path, = 10 m, at a speed of
v = (0.09 t2 + 0.1 t) m/s.
Find: The magnitudes of her velocity and acceleration when
she has traveled 3 m.
Plan:
The bicyclist starts from rest (v = 0 when t = 0).
1) Integrate v(t) to find the position s(t).
2) Calculate the time when s = 3 m using s(t).
3) Calculate the tangential and normal components of
acceleration and then the magnitude of the
acceleration vector.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING II (continued)
Solution:
1) The velocity vector is v = (0.09 t2 + 0.1 t) m/s, where t is in
seconds. Integrate the velocity and find the position s(t).
Position:
v dt =
(0.09 t2 + 0.1 t) dt
s (t) = 0.03 t3 + 0.05 t2
2) Calculate the time, t when s = 3 m.
3 = 0.03 t3 + 0.05 t2
Solving for t, t = 4.147 s
The velocity at t = 4.147 s is,
v = 0.09 (4.147 ) 2 + 0.1 (4.147 ) = 1.96 m/s
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING II (continued)
.
3) The acceleration vector is a = atut + anun = vut + (v2/)un.
Tangential component:
.
at = v = d(0.09 t2 + 0.1 t) / dt = (0.18 t + 0.1) m/s2
At t = 4.147 s : at = 0.18 (4.147) + 0.1 = 0.8465 m/s2
Normal component:
an = v2/ m/s2
At t = 4.147 s : an = (1.96)2 / (10) = 0.3852 m/s2
The magnitude of the acceleration is
a = (an )2 +(at )2 = 0.84652 + 0.38522 = 0.930 m/s2
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
CYLINDRICAL COMPONENTS
(Section 12.8)
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE
Given: The platform is rotating such
that, at any instant, its angular
position is = (4t3/2) rad, where
t is in seconds.
A ball rolls outward so that its
position is r = (0.1t3) m.
Find: The magnitude of velocity and acceleration of the
ball when t = 1.5 s.
Plan: Use a polar coordinate system and related
kinematic equations
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE (continued)
Solution:
𝑟 = 0.1𝑡 3 , rሶ = 0.3 t 2 , rሷ = 0.6 t
𝜃 = 4 t3/2, 𝜃ሶ = 6 t1/2, 𝜃ሷ = 3 t−1/2
At t=1.5 s,
r = 0.3375 m, rሶ = 0.675 m/s, rሷ = 0.9 m/s2
𝜃 = 7.348 rad, 𝜃ሶ = 7.348 rad/s, 𝜃ሷ = 2.449 rad/s2
Substitute into the equation
for velocity
.
.
v = r ur + r uθ = 0.675 ur + 0.3375 (7.348) uθ
= 0.675 ur + 2.480 uθ
v = (0.675)2 + (2.480)2 = 2.57 m/s
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE (continued)
Substitute in the equation for acceleration:
.. . .
.
..
2
a = (r – r )ur + (r + 2r)uθ
a = [0.9 – 0.3375(7.348)2] ur
+ [0.3375(2.449) + 2(0.675)(7.348)] uθ
a = – 17.33 ur + 10.75 uθ m/s2
a = (– 17.33)2 + (10.75)2 = 20.4 m/s2
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING
Given: The arm of the robot is
extending at a constant rate
𝑟ሶ = 1.5 m/s when r = 3 m,
z = (4t2) m, and = (0.5 t) rad,
where t is in seconds.
Find: The velocity and acceleration
of the grip A when t = 3 s.
Plan: Use cylindrical coordinates.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING (continued)
Solution:
When t = 3 s, r = 3 m and the arm is extending at a constant
rate 𝑟ሶ = 1.5 m/s. Thus 𝑟ሷ = 0 m/s2
𝜃 = 1.5 t = 4.5 rad, 𝜃ሶ = 1.5 rad/s,
𝜃ሷ = 0 rad/s2
z = 4 t2 = 36 m,
zሶ = 8 t = 24 m/s,
zሷ = 8 m/s2
Substitute in the equation
for velocity
.
.
.
v = r ur + r uθ + z ur
= 1.5 ur + 3 (1.5) uθ + 24 uz
= 1.5 ur + 4.5 uθ + 24 uz
Magnitude v = (1.5)2 + (4.5)2 + (24)2 = 24.5 m/s
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING (continued)
Acceleration equation in cylindrical coordinates
.
.. . .
..
..
2
a = (r – r )ur + (r + 2r)uθ + zuz
= {0 – 3 (1.5)2}ur +{3 (0) + 2 (1.5) 1.5 } uθ + 8 uz
a = [6.75 ur + 4.5 uθ + 8 uz] m/s2
a = (6.75)2 + (4.5)2 + (8)2 = 11.4 m/s2
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
DEPENDENT MOTION (Section 12.9)
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE
Given: In the figure on the left, the cord
at A is pulled down with a speed
of 3 m/s.
Find: The speed of block D.
Plan: There is only one cord involved in
the motion, so only one
position/length equation is required.
Define position coordinates for block
D and cable lengths that change,
write the position relation and then
differentiate it to find the relationship
between the two velocities.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE (continued)
Solution:
1) A datum line can be drawn through the upper, fixed pulleys.
Two coordinates must be defined: one for block D (sD) and
one for the changing cable length (sA).
sA
Datum
• sA can be defined to the point A.
sD
• sD can be defined to the center
of the pulley above D.
• All coordinates are defined as
positive down and along the
direction of motion of each
point/object.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE (continued)
Datum
sA
sD
2) Write position/length equations for
the cord. Define lT as the length of
the cord, minus any segments of
constant length.
sA + 3sD = lT
3) Differentiate to find the velocity
relationship:
vA + 3vD = 0
Since the cord at A is pulled down with a speed of 3 m/s,
3 + 3vD = 0 vD = -1 m/s = 1 m/s
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING I
Given: In the figure on the left,
the cord at A is pulled
down with a speed of 2
m/s.
Find: The speed of block B.
Plan: There are two cords involved
in the motion in this example.
There will be two position
equations (one for each cord).
Write these two equations,
combine them, and then
differentiate them.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING I (continued)
Solution:
1) Define the position coordinates from a fixed datum line. Three
coordinates must be defined: one for point A (sA), one for block B
(sB), and one for block C (sC).
• Define the datum line through the top
pulley (which has a fixed position).
• sA can be defined to the point A.
• sB can be defined to the center of the
pulley above B.
• sC is defined to the center of pulley C.
• All coordinates are defined as
positive down and along the direction
of motion of each point/object.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING I (continued)
2) Write position/length equations for
each cord. Define l1 as the length of
the first cord, minus any segments of
constant length. Define l2 in a similar
manner for the second cord:
Cord 1: sA + 2sC = l1
Cord 2: sB + (sB – sC) = l2
3) Eliminating sC between the two
equations, we get
sA + 4sB = l1 + 2l2
4) Relate velocities by differentiating this expression. Note that l1 and l2
are constant lengths.
vA + 4vB = 0 vB = – 0.25vA = – 0.25(2) = – 0.5 m/s
The velocity of block B is 0.5 m/s up (negative sB direction).
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING II
Given: In this pulley system, block A is
moving downward with a speed
of 6 m/s while block C is
moving down at 18 m/s.
Find: The speed of block B.
Plan:
All blocks are connected to a single cable, so only one
position/length equation will be required. Define
position coordinates for each block, write out the
position relation, and then differentiate it to relate the
velocities.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING II (continued)
Solution:
1) A datum line can be drawn through the upper, fixed, pulleys
and position coordinates defined from this line to each block
(or the pulley above the block).
Datum
sA
sB
sC
2) Defining sA, sB, and sC as shown,
the position relation can be written:
sA + 2sB + 2 sC = lT
3) Differentiate to relate velocities:
vA + 2vB + 2 vC = 0
6 + 2vB + 2(18) =0
vB = - 21 m/s = 21 m/s
The velocity of block B is 21 m/s up.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
RELATIVE POSITION (Section 12.10)
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE
Given:
Two aircraft as shown.
vA = 650 km/h
vB = 800 km/h
Find:
vB/A
Plan:
1) Vector Method: Write vectors vA and vB in Cartesian
form, then determine vB – vA
2) Graphical Method: Draw vectors vA and vB from a
common point. Apply the laws of sines and cosines to
determine vB/A.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE (continued)
Solution:
1) Vector Method
vA = (650 i ) km/h
vB = –800 cos 60 i – 800 sin 60 j
= ( –400 i – 692.8 j) km/h
vB/A = vB – vA = (–1050 i – 692.8 j) km/h
vB /A = (−) +(−) = km/h
= tan-1(
) = 33.4
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
EXAMPLE (continued)
2) Graphical Method:
Note that the vector that measures the tip of B relative to A is vB/A.
650 km/h
vA
120
vB
vB/A
Law of Cosines:
(vB/A)2 = (800) 2 + (650) 2 − (800) (650) cos 120
vB/A = 1258 km/h
Law of Sines:
vB/A
sin(120 )
=
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
vA
sin
or =
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING
Given: Car A moves in a straight line
while Car B moves along a
curve having a radius of
curvature of 200 m.
vA = 40 m/s
vB = 30 m/s
aA = 4 m/s2
aB = -3 m/s2
Find:
vB/A
aB/A
Plan: Write the velocity and acceleration vectors for
Cars A and B. Determine vB/A and aB/A by using
vector relationships.
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING (continued)
y
Solution:
The velocity of B is:
vB = -30 sin(30) i + 30 cos(30) j
= (-15 i + 25.98 j) m/s
The velocity of A is:
vA = 40 j (m/s)
x
The relative velocity of B with respect to A is (vB/A):
vB/A = vB – vA = (-15 i + 25.98 j) – (40 j) = (-15 i – 14.02 j) m/s
or
vB/A =
(-15)2 + (-14.02)2 = 20.5 m/s
= tan-1(
14.02
) = 43.1°
15
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
GROUP PROBLEM SOLVING (continued)
Since car B is traveling along a curve, the acceleration of B is:
aB = (at)B + (an)B = [-(-3) sin(30) i + (-3) cos(30) j]
2
302
30
+ [- (
) cos(30) i - (
) sin(30) j ]
200
200
y
aB = ( -2.397 i – 4.848 j ) m/s2
The acceleration of A is: aA = (4 j ) m/s2
x
The relative acceleration of B with respect to A is:
aB/A = aB – aA = ( -2.397 i – 8.848 j ) m/s2
aB/A =
(-2.397)2 + (-8.848)2 = 9.17 m/s2
= tan-1(8.848 / 2.397) = 74.8°
Dynamics, Fourteenth Edition in SI Units
R.C. Hibbeler
Copyright ©2017 by Pearson Education, Ltd.
All rights reserved.
0
You can add this document to your study collection(s)
Sign in Available only to authorized usersYou can add this document to your saved list
Sign in Available only to authorized users(For complaints, use another form )