1
EQUATION SHEETS FOR EXAMS
EML 3004: Introduction to Mechanical Engineering
Spring Semester 2019
1. A vector A, with coordinate direction angles 𝛼𝛼, 𝛽𝛽 and 𝛾𝛾, can be written in Cartesian vector notation
as:
𝐀𝐀 = 𝐴𝐴 cos 𝛼𝛼𝐢𝐢 + 𝐴𝐴 cos 𝛽𝛽𝐣𝐣 + 𝐴𝐴 cos 𝛾𝛾𝐤𝐤
= 𝐴𝐴𝑥𝑥 𝐢𝐢 + 𝐴𝐴𝑦𝑦 𝐣𝐣 + 𝐴𝐴𝑧𝑧 𝐤𝐤
= 𝐴𝐴𝐮𝐮𝐴𝐴
The unit vector (uA) in the direction of vector A, is given by:
𝐮𝐮𝐴𝐴 = cos 𝛼𝛼𝐢𝐢 + cos 𝛽𝛽𝐣𝐣 + cos 𝛾𝛾𝐤𝐤
where,
cos 2 𝛼𝛼 + cos2 𝛽𝛽 + cos2 𝛾𝛾 = 1
2. A position vector rAB directed from point 𝐴𝐴(𝑥𝑥𝐴𝐴 , 𝑦𝑦𝐴𝐴 , 𝑧𝑧𝐴𝐴 ) to point 𝐵𝐵(𝑥𝑥𝐵𝐵 , 𝑦𝑦𝐵𝐵 , 𝑧𝑧𝐵𝐵 ) can be expressed in
Cartesian vector form as follows:
𝐫𝐫𝐴𝐴𝐴𝐴 = (𝑥𝑥𝐵𝐵 − 𝑥𝑥𝐴𝐴 )𝐢𝐢 + (𝑦𝑦𝐵𝐵 − 𝑦𝑦𝐴𝐴 )𝐣𝐣 + (𝑧𝑧𝐵𝐵 − 𝑧𝑧𝐴𝐴 )𝐤𝐤
3. If two coordinate points, 𝐴𝐴(𝑥𝑥𝐴𝐴 , 𝑦𝑦𝐴𝐴 , 𝑧𝑧𝐴𝐴 ) and 𝐵𝐵(𝑥𝑥𝐵𝐵 , 𝑦𝑦𝐵𝐵 , 𝑧𝑧𝐵𝐵 ), in the line of action of a force F are known,
and the force is in the direction from A to B, then the force can be written in Cartesian vector form
as:
𝐅𝐅 = 𝐹𝐹𝐮𝐮𝐴𝐴𝐴𝐴 = 𝐹𝐹 �
(𝑥𝑥𝐵𝐵 − 𝑥𝑥𝐴𝐴 )𝐢𝐢 + (𝑦𝑦𝐵𝐵 − 𝑦𝑦𝐴𝐴 )𝐣𝐣 + (𝑧𝑧𝐵𝐵 − 𝑧𝑧𝐴𝐴 )𝐤𝐤
𝐫𝐫𝐴𝐴𝐴𝐴
� = 𝐹𝐹 �
�
𝑟𝑟𝐴𝐴𝐴𝐴
�(𝑥𝑥𝐵𝐵 − 𝑥𝑥𝐴𝐴 )2 + (𝑦𝑦𝐵𝐵 − 𝑦𝑦𝐴𝐴 )2 + (𝑧𝑧𝐵𝐵 − 𝑧𝑧𝐴𝐴 )2
4. The magnitude A of the vector A, where 𝐀𝐀 = 𝐴𝐴𝑥𝑥 𝐢𝐢 + 𝐴𝐴𝑦𝑦 𝐣𝐣 + 𝐴𝐴𝑧𝑧 𝐤𝐤, is given by:
𝐴𝐴 = �𝐴𝐴2𝑥𝑥 + 𝐴𝐴2𝑦𝑦 + 𝐴𝐴2𝑧𝑧
5. The dot product or scalar product of two vectors, A and B, is given by:
𝐀𝐀 ∙ 𝐁𝐁 = 𝐴𝐴𝐴𝐴 cos 𝜃𝜃 = 𝐴𝐴𝑥𝑥 𝐵𝐵𝑥𝑥 + 𝐴𝐴𝑦𝑦 𝐵𝐵𝑦𝑦 + 𝐴𝐴𝑧𝑧 𝐵𝐵𝑧𝑧
𝐀𝐀 ∙ 𝐁𝐁
� = cos −1(𝐮𝐮𝐴𝐴 ∙ 𝐮𝐮𝐵𝐵 )
Also, 𝜃𝜃 = cos−1 �
𝐴𝐴𝐴𝐴
The magnitude (𝐴𝐴𝑎𝑎 ) of the projection of vector A along a line aa whose direction is specified by 𝐮𝐮𝑎𝑎 , is
given by:
𝐴𝐴𝑎𝑎 = 𝐀𝐀 ∙ 𝐮𝐮𝑎𝑎
2
6. The necessary and sufficient conditions for a particle to be in equilibrium are:
Σ𝐅𝐅 = 𝟎𝟎
𝐹𝐹𝑅𝑅 = Σ𝐹𝐹 = 0
For a coplanar force system:
Σ𝐹𝐹𝑥𝑥 = 0
Σ𝐹𝐹𝑦𝑦 = 0
For a three-dimensional force system:
Σ𝐹𝐹𝑥𝑥 = 0
Σ𝐹𝐹𝑦𝑦 = 0
Σ𝐹𝐹𝑧𝑧 = 0
7. The necessary and sufficient conditions for equilibrium of a rigid body are that: (1) the resultant
force is equal to zero, and (2) the resultant moment due to all the forces (Σ𝐌𝐌𝑜𝑜 ) plus the sum of all
the couple moments (Σ𝐌𝐌) is equal to zero. That is:
𝐅𝐅𝑅𝑅 = Σ𝐅𝐅 = 0
(𝐌𝐌𝑅𝑅 )𝑜𝑜 = Σ𝐌𝐌𝑜𝑜 + Σ𝐌𝐌 = 0
Thus, the scalar equations for equilibrium in two dimension are:
Σ𝐹𝐹𝑥𝑥 = 0
Σ𝐹𝐹𝑦𝑦 = 0
Σ𝑀𝑀𝑜𝑜 = 0
And, the scalar equations for equilibrium in three dimensions are:
Σ𝐹𝐹𝑥𝑥 = 0
Σ𝐹𝐹𝑦𝑦 = 0
Σ𝐹𝐹𝑧𝑧 = 0
Σ𝑀𝑀𝑥𝑥 = 0
Σ𝑀𝑀𝑦𝑦 = 0
Σ𝑀𝑀𝑧𝑧 = 0
8. Cross-product of two vectors, A and B:
𝐢𝐢
𝐴𝐴
𝐀𝐀 X 𝐁𝐁 = � 𝑥𝑥
𝐵𝐵𝑥𝑥
𝐣𝐣
𝐴𝐴𝑦𝑦
𝐵𝐵𝑦𝑦
𝐤𝐤
𝐴𝐴𝑧𝑧 � = �𝐴𝐴𝑦𝑦 𝐵𝐵𝑧𝑧 − 𝐴𝐴𝑧𝑧 𝐵𝐵𝑦𝑦 �𝐢𝐢 − (𝐴𝐴𝑥𝑥 𝐵𝐵𝑧𝑧 − 𝐴𝐴𝑧𝑧 𝐵𝐵𝑥𝑥 )𝐣𝐣 + �𝐴𝐴𝑥𝑥 𝐵𝐵𝑦𝑦 − 𝐴𝐴𝑦𝑦 𝐵𝐵𝑥𝑥 �𝐤𝐤
𝐵𝐵𝑧𝑧
9. Moment (Mo) of a force F about point O:
𝑀𝑀𝑜𝑜 = 𝐹𝐹𝐹𝐹
𝐢𝐢
𝑟𝑟
𝐌𝐌𝑜𝑜 = 𝐫𝐫 X 𝐅𝐅 = � 𝑥𝑥
𝐹𝐹𝑥𝑥
𝐣𝐣
𝑟𝑟𝑦𝑦
𝐹𝐹𝑦𝑦
𝐤𝐤
𝑟𝑟𝑧𝑧 �
𝐹𝐹𝑧𝑧
(Scalar Formulation)
(Vector Formulation)
Here, r is any position vector drawn from point O to any point on the line of action of the force.
3
10. Moment (Ma) of a force F about an axis a:
𝑢𝑢𝑎𝑎𝑥𝑥
𝑀𝑀𝑎𝑎 = 𝐮𝐮𝑎𝑎 ∙ (𝐫𝐫 X 𝐅𝐅) = � 𝑟𝑟𝑥𝑥
𝐹𝐹𝑥𝑥
𝑢𝑢𝑎𝑎𝑦𝑦
𝑟𝑟𝑦𝑦
𝐹𝐹𝑦𝑦
𝑢𝑢𝑎𝑎𝑧𝑧
𝑟𝑟𝑧𝑧 �
𝐹𝐹𝑧𝑧
Here, 𝐮𝐮𝑎𝑎 is the unit vectors defining the direction of the a-axis, and r is any position vector
extending from any point on the a-axis to any point on the line of action of the force.
Once Ma is determined, then Ma can be determine as a Cartesian vector using: 𝐌𝐌𝑎𝑎 = 𝑀𝑀𝑎𝑎 𝐮𝐮𝑎𝑎
11. Moment of a couple:
𝑀𝑀 = 𝐹𝐹𝐹𝐹
(Scalar Formulation)
𝐌𝐌 = 𝐫𝐫 X 𝐅𝐅
(Vector Formulation)
Here, the position vector r is crossed with the force F towards which it is directed.
12. Planar trusses
Using the 𝐌𝐌𝐌𝐌𝐌𝐌𝐌𝐌𝐌𝐌𝐌𝐌 𝐨𝐨𝐨𝐨 𝐉𝐉𝐉𝐉𝐉𝐉𝐉𝐉𝐉𝐉𝐉𝐉, the applicable equations of equilibrium are: Σ𝐹𝐹𝑥𝑥 = 0 and Σ𝐹𝐹𝑦𝑦 = 0
Using the 𝐌𝐌𝐌𝐌𝐌𝐌𝐌𝐌𝐌𝐌𝐌𝐌 𝐨𝐨𝐨𝐨 𝐒𝐒𝐒𝐒𝐒𝐒𝐒𝐒𝐒𝐒𝐒𝐒𝐒𝐒𝐒𝐒, the applicable equations of equilibrium are:
Σ𝐹𝐹𝑥𝑥 = 0,
Σ𝐹𝐹𝑦𝑦 = 0,
Σ𝑀𝑀𝑜𝑜 = 0
13. Internal Forces
Draw appropriate free-body diagrams, (including for segments, as necessary), and apply:
ΣFx = 0
ΣFy = 0
ΣMP = 0
14. Friction
Draw appropriate free-body diagram(s) and apply equations for equilibrium.
For the condition of impending motion: 𝐹𝐹𝑠𝑠 = 𝜇𝜇𝑠𝑠 𝑁𝑁
4
15. Centroid of an Area
Generally:
∫ 𝑥𝑥� 𝑑𝑑𝑑𝑑
𝑥𝑥̅ = 𝐴𝐴
∫𝐴𝐴 𝑑𝑑𝑑𝑑
For composite cross sections:
𝑥𝑥̅ =
∫ 𝑦𝑦� 𝑑𝑑𝑑𝑑
𝑦𝑦� = 𝐴𝐴
∫𝐴𝐴 𝑑𝑑𝑑𝑑
∑ 𝑥𝑥�𝐴𝐴
∑ 𝐴𝐴
𝑦𝑦� =
∑ 𝑦𝑦�𝐴𝐴
∑ 𝐴𝐴
16. Moments of Inertia
Generally:
𝐼𝐼𝑥𝑥 = � 𝑦𝑦 2 𝑑𝑑𝑑𝑑
𝐼𝐼𝑦𝑦 = � 𝑥𝑥 2 𝑑𝑑𝑑𝑑
𝐴𝐴
Parallel-Axis Theorem:
For composite cross sections:
𝐴𝐴
𝐼𝐼𝑥𝑥 = 𝐼𝐼𝑥𝑥 ′ + 𝐴𝐴𝑑𝑑𝑦𝑦2
𝑛𝑛
𝐼𝐼𝑦𝑦 = 𝐼𝐼𝑦𝑦′ + 𝐴𝐴𝑑𝑑𝑥𝑥2
𝐼𝐼𝑥𝑥 = Σ(𝐼𝐼𝑥𝑥 )𝑖𝑖 = � ��𝐼𝐼𝑥𝑥′ � + �𝐴𝐴𝑑𝑑2𝑦𝑦 � �
𝑖𝑖=1
𝑛𝑛
𝑖𝑖
𝑖𝑖
𝐼𝐼𝑦𝑦 = Σ�𝐼𝐼𝑦𝑦 �𝑖𝑖 = � ��𝐼𝐼𝑦𝑦 ′ � + (𝐴𝐴𝑑𝑑𝑥𝑥2 )𝑖𝑖 �
𝑖𝑖=1
𝑖𝑖
17. Geometric Properties of Area Elements (Position of Centroid, Cross-Sectional Area, and Moments of
Inertia about Axes through Centroid):
(Continued on next page)
5