Uploaded by
moira fuentes
Nippon Chemi-Con Aluminum Electrolytic Capacitors Catalog 2020
advertisement
E nglish （ G l o b a l Ve r.） 2020 ALUMINUM ELECTROLYTIC CAPACITORS CAT.NO.E1001U Aluminum Electrolytic Capacitors Product Guide Group Chart Series Table Part Numbering System Environmental Consideration Taping Specifications Cut / Formed Lead Type Minimum Order Quantity Available Terminals For Snap-in And Screw-Mount Type Standardization World-Wide Manufacturing Locations Conductive Polymer Aluminum Solid Capacitors Precautions and Guidelines Recommended Soldering Conditions Lifetime Estimation Part Numbering System Product List Resin-Molded Chip Type Chip Type Radial Lead Type Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Precautions and Guidelines Recommended Soldering Conditions Part Numbering System Chip Type Radial Lead Type Aluminum Electrolytic Capacitors Precautions and Guidelines Recommended Soldering Conditions Chip Type Radial Lead Type Snap-in Type Screw Terminal Type For Audio Technical Note Reliability Test Data Appendix GROUP CHART AEC-Q200 ☆: Recommendation products : AEC-Q200 compliant. Please contact your local Chemi-Con office for more details, test data, information and also non indicated products. CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Digitalization Super Low ESR ■ RESIN-MOLDED SURFACE MOUNT TYPE Resin-Molded Type PMF 105℃5,000H ■ RADIAL LEAD TYPE ■ SURFACE MOUNT TYPE Surface Mount Type PXA PXF PXS ★ 105℃3,000/15,000H Low ESR AEC-Q200 PXN PXE ★ Long Life 125℃ High Temperature PXK 125℃1,000H PXG 105℃16 to 25V High moisture resistance Long Life 105℃15,000H PXD PXJ PSE PSC Downsizing ★ Low ESR Low ESR,Long Life AEC-Q200 PXT PSJ PSF ★ PXH ★ 105℃15,000H High moisture resistance Radial Lead Type PSW 125℃2,000H PSG ★ 105℃25V Downsizing ★ 105℃16 to 35V PSK Downsizing,Long Life Digitalization CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Super Low ESR ■ SURFACE MOUNT TYPE Automotive Application ■ RADIAL LEAD TYPE Surface Mount Type Radial Lead Type 125℃/135℃ High Temperature AEC-Q200 AEC-Q200 HXD 105℃5,000/10,000H 125℃/135℃ High Temperature HXE AEC-Q200 135℃2,000/4,000H HSE 135℃4,000H AEC-Q200 AEC-Q200 HXB AEC-Q200 HXA 125℃4,000H 105℃5,000H AEC-Q200 HXC 125℃4,000H HXJ AEC-Q200 AEC-Q200 HSD 125℃4,000H 105℃10,000H HSC 125℃4,000H ALUMINUM ELECTROLYTIC CAPACITORS ■ SURFACE MOUNT TYPE（CE32） Digitalization 105℃ High Voltage AEC-Q200 105℃ Low Impedance AEC-Q200 MKB MVY 400V AEC-Q200 MZA ★ 105℃1,000 to 5,000H Low Z 105℃2,000/5,000H MZK AEC-Q200 Automotive Application AEC-Q200 MVH 125℃ AEC-Q200 MHB ★ MLA MVE ★ 85℃ MZJ Low Z 105℃2,000/5,000H 105℃3,000H 105℃ MZE MHL Downsizing 125℃ 2,000/4,000H AEC-Q200 MHJ AEC-Q200 MHS 125℃ 5,000H AEC-Q200 MHK 125℃ Low ESR Low ESR 125℃ Low ESR Low ESR 125℃ Low ESR MZR AEC-Q200 ★ Downsizing 105℃2,000H High Capacitance Long Life MZS 105℃2,000H MZL 105℃5,000H MZF Long Life 105℃7,000/8,000H Long Life 105℃10,000H 105℃ Long Life 125℃/150℃ High Temperature AEC-Q200 AEC-Q200 AEC-Q200 Long Life 105℃5,000H Low Profile Surface Mount Standard MVA AEC-Q200 AEC-Q200 MXB 150℃ 1,000H MVL MLE MLF 105℃3,000/5,000H Long Life 105℃7,000/8,000H Long Life 105℃10,000H MVJ 105℃2,000H MLK 105℃5,000H Low Profile Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 GROUP CHART AEC-Q200 ☆: Recommendation products : AEC-Q200 compliant. Please contact your local Chemi-Con office for more details, test data, information and also non indicated products. ALUMINUM ELECTROLYTIC CAPACITORS ■ RADIAL LEAD TYPE 105℃ Low Impedance / High Ripple（6.3 to 100V） Low Profile （ 9 to 25mm height ） KRG SRG 85℃ 9 to 25mmL KZE KZH Low Z Low Z KY KYA KZM ★ AEC-Q200 AEC-Q200 LXV KZN Long Life Long Life, Low Z High Ripple Long Life, Low Z ★ AEC-Q200 KYB KYC Long Life, Low ESR Long Life, Low Z Downsizing Long Life, Low Z Low Z Long Life, Low Z 105℃ 9 to 25mmL AEC-Q200 LXY AEC-Q200 LXZ LZA ★ Long Life, Low Z Low Z Long Life, Low Z Downsizing Long Life, Low Z Low Z 105℃ High Ripple / Long Life（160V and more） PAG Radial Lead Standard ★ SMQ ★ 105℃2,000H KMQ Low Profile Power Supply Output Filter KHE Downsizing 105℃2,000H Downsizing 105℃5,000H Power Supply Input Filter KHF 105℃3,000H Downsizing ★ Downsizing ★ Downsizing SMG 105℃5,000H KMG 85℃ KWB KWA 105℃ 85℃ AEC-Q200 KXG 105℃ ★ KXJ KXL KXN 105℃8,000/10,000H Downsizing 105℃8,000 to 12,000H Downsizing 105℃10,000/12,000H Downsizing 105℃10,000/12,000H Automotive Application 125℃/135℃/150℃ High Temperature AEC-Q200 GXF ★ 125℃ High Ripple AEC-Q200 GPA ★ GXE 125℃ For Photo Flash PH AEC-Q200 AEC-Q200 GPD AEC-Q200 150℃1,000H 125℃ High Ripple High Ripple 135℃ High Ripple High temperature For Airbag AEC-Q200 GVD GQB ★ Downsizing AEC-Q200 High vibration resistance Downsizing High Ripple AEC-Q200 AEC-Q200 GXL 125℃5,000H LED Lighting Compact Charger Downsizing（160V and more） KXE 105℃10,000/12,000H AEC-Q200 GVA 125℃ Long Life Long Life KXF 105℃15,000/20,000H Long Life LBV 105℃5,000H 135℃2,000 to 3,000H LBG 105℃5,000H No Sparks against Over-Voltage LE KLJ 105℃10,000H 105℃2,000H ■ For Audio Surface Mount Type Radial Lead Type MAK AWJ 85℃ High grade 105℃1,000H MAR 85℃2,000H AVH 85℃1,000H Snap-in Type AJ 85℃1,000H ASG 85℃ Downsizing Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 GROUP CHART ☆: Recommendation products ALUMINUM ELECTROLYTIC CAPACITORS ■ SNAP-IN TYPE Long Life 105℃ Long Life KHS LXQ 105℃3,000H 105℃5,000H LXM Downsizing KMS Snap-in Standard SMQ ★ 85℃2,000H 105℃2,000H SMH 85℃6.3 to 100V 105℃3,000H KMQ ★ RLA SMM KMH TXH Long Life 105℃10,000H Downsizing 105℃5,000H LXS LHS ★ 105℃10 to 100V 105℃5,000H High Ripple KMM 85℃3,000H LHJ 105℃3,000H 105℃6.3 to 100V Long Life Downsizing Downsizing 105℃5,000H Super Downsizing KMR SMR Inverter control application 85℃3,000H LXG ★ 105℃7,000H Long Life 85℃5,000H 125℃ High Temperature High Ripple KLA KMT 105℃3,000H KMZ ★ ★ 105℃2,000H Downsizing 105℃2,000H Downsizing 105℃2,000H 85℃2,000H RLB KMW ★ KHJ 105℃3,000H High Ripple 105℃3,000H GXA 125℃3,000H No Sparks against Over-Voltage KHE 105℃2,000H Charge and Discharge application CHA 105℃2,000H KMV 105℃3,000H Please contact us for AEC-Q200 compliant of Snap-in type. ■ SCREW-MOUNT TYPE 85℃ High Ripple（5,000/20,000H） RWX FTP 85℃5,000H 85℃5,000H High Capacitance RWF 85℃5,000H Screw-Mount Standard RWH High Ripple 85℃5,000H RWL KMQ High Voltage （500V and more） Downsizing 85℃2,000H KMH RHB For Inverter 105℃2,000H 85℃ High Ripple（2,000H） RWU 105℃ High Ripple LXA 105℃2,000/5,000H For Inverter 500 to 650V High Capacitance RWE ★ 350 to 550V RWQ Downsizing 350 to 550V U37L U37X 85℃5,000H Long Life 85℃10,000H Long Life 85℃15,000H RWR ★ High Ripple 350 to 450V Charge and Discharge application UNITED CHEMI-CON, INC. Products U37F 575 to 700V RHA 400, 450V LXR High Ripple 105℃5,000H Compact Size High ripple 85℃20,000H 105℃2,000H SME Oval shape（85℃） Toroidal Shape UTOR 105℃5,000H RWV 85℃5,000H Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CAPACITOR SERIES TABLE, CONTENTS Resin-Molded PMF New! Surface Mount Type PXN PXT PXJ PXG PXK Surface PXS Mount Type PXF PXE PXA PXD PXH PSW New! PSJ PSG Upgrade! PSK Radial Lead PSF Type PSE PSC AEC-Q200 Long life High temperature Low Z Features Miniaturization Low profile type Series Standard Type ■CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Super low ESR, low profile PSA Super low ESR, high ripple current, high moisture resistance Super low ESR, high ripple current, high moisture resistance Super low ESR, high ripple current, downsizing Super low ESR, high ripple current, downsizing Super low ESR, high ripple current, downsizing Super low ESR, high ripple current Super low ESR, high ripple current Super low ESR, high ripple current Super low ESR, high ripple current 125℃, super low ESR, high ripple current 125℃, super low ESR, high ripple current Super low ESR, high ripple current, downsizing Super low ESR, high ripple current, downsizing Super low ESR, high ripple current Super low ESR, high ripple current Super low ESR, high ripple current Super low ESR, high ripple current Super low ESR, high ripple current Super low ESR, high ripple current PS Super low ESR, high ripple current Terminal type (Ask Engineering Bulletin No.711 in detail) Rated voltage range (Vdc) 105℃ 5,000 hours 16 to 25 SMD SMD SMD SMD SMD SMD SMD Radial Radial Radial Radial Radial Radial Radial 105℃ 5,000 hours 105℃ 15,000 hours 105℃ 15,000 hours 105℃ 3,000 to 15,000 hours 105℃ 3,000 to 15,000 hours 105℃ 20,000 hours 105℃ 3,000 to 15,000 hours 105℃ 15,000 hours 105℃ 3,000 to 15,000 hours 125℃ 2,000 hours 125℃ 1,000 hours 105℃ 5,000 hours 105℃ 2,000 to 5,000 hours 105℃ 15,000 to 20,000 hours 105℃ 20,000 hours 105℃ 20,000 hours 105℃ 20,000 hours 105℃ 15,000 hours 2.5 to 16 2.5 to 16 2.5 to 25 16 to 25 2.5 to 16 4 to 16 2 to 10 2.5 to 16 2.5 to 25 2.5 to 10 2.5 to 20 25 2.5 16 to 35 2.5 to 6.3 2 to 16 2.5 to 6.3 2.5 to 16 Radial 105℃ 15,000 hours 2.5 to 16 Radial 105℃ 15,000 hours 2.5 to 35 - SMD SMD SMD SMD (Ask Engineering Bulletin No.721 in detail) Endurance (+R=With ripple) HXE Upgrade! HXJ New! HXC Upgrade! HXD Upgrade! Surface Mount Type HXA Upgrade! Radial Lead Type AEC-Q200 Long life High temperature Low Z Features Miniaturization Low profile type Series Standard Type ■CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS 135℃, super low ESR, high ripple current 125℃, super low ESR, high ripple current 125℃, super low ESR, high ripple current Super low ESR, high ripple current 125℃, super low ESR, high ripple current Terminal type Endurance (+R=With ripple) Rated voltage range (Vdc) SMD SMD SMD SMD 135℃ 2,000 to 4,000 hours +R 125℃ 4,000 hours +R 125℃ 4,000 hours +R 105℃ 5,000 to 10,000 hours +R 16 to 63 16 to 63 16 to 63 16 to 80 SMD 125℃ 4,000 hours +R HXB Super low ESR, high ripple current SMD 105℃ 5,000 hours +R 80 HSE HSC HSD Upgrade! 135℃, super low ESR, high ripple current Radial Radial Radial 135℃ 4,000 hours +R 125℃ 4,000 hours +R 105℃ 10,000 hours +R 25 to 63 25 to 63 25 to 80 (Ask Engineering Bulletin No.830 for 16 to 63V) (Ask Engineering Bulletin No.831 for 16 to 63V) 125℃, super low ESR, high ripple current Super low ESR, high ripple current 80 General Purpose Surface Mount Type Low Impedance Long Life MVA Upgrade! MVE Upgrade! MZS MZL MZR Upgrade! MZJ Upgrade! MZA Upgrade! MVY Upgrade! MZF MZE MZK MLA MLF MLE MLK MVL MVJ MHS MVH Upgrade! MHL Upgrade! MHB Special MHJ Upgrade! Application MHK Upgrade! MXB MKB MV-BP MVK-BP High temperature Miniaturization Low profile type Rated voltage range (Vdc) 85℃, standard 105℃, standard Super low ESR, downsizing 5,000 hours, long life, low ESR Super low ESR, downsizing Super low ESR Super low impedance, case size 4 to 18mm Low impedance, standard, case size 4 to 18mm 10,000 hours, long life, low impedance 7,000/8,000 hours, long life, low impedance 5,000 hours, long life, low impedance 3,000 hours, long life, low impedance 10,000 hours, long life 7,000/8,000 hours, long life 5,000 hours, long life 3,000/5,000 hours, long life 2,000 hours, long life 125℃, high temperature reflow soldering(3times) 125℃, case size 6.3 to 18mm 125℃, downsizing SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD SMD 85℃ 2,000 hours 105℃ 1,000 to 2,000 hours 105℃ 2,000 hours 105℃ 5,000 hours 105℃ 2,000 hours 105℃ 2,000 to 5,000 hours 105℃ 2,000 to 5,000 hours 105℃ 1,000 to 5,000 hours 105℃ 10,000 hours 105℃ 7,000 to 8,000 hours 105℃ 5,000 hours 105℃ 3,000 hours 105℃ 10,000 hours 105℃ 7,000 to 8,000 hours 105℃ 5,000 hours 105℃ 3,000 to 5,000 hours 105℃ 2,000 hours 125℃ 5,000 hours 125℃ 1,000 to 5,000 hours 125℃ 2,000 to 4,000 hours 4 to 450 6.3 to 450 25 & 35 6.3 to 50 6.3 to 50 6.3 to 50 6.3 to 100 6.3 to 100 6.3 to 50 6.3 to 50 6.3 to 35 6.3 to 50 6.3 to 50 6.3 to 50 6.3 to 35 6.3 to 50 6.3 to 50 16 to 100 10 to 450 10 to 35 125℃, specified ESR after endurance Case size 8 to 18mm SMD 125℃ 1,500 to 3,000 hours 10 to 100 125℃, specified ESR after endurance SMD SMD SMD SMD SMD SMD 125℃ 2,000 to 3,000 hours 125℃ 2,000 hours 150℃ 1,000 hours 105℃ 3,000 hours 85℃ 2,000 hours 105℃ 1,000 hours 10 to 35 35 25 & 35 400 6.3 to 50 6.3 to 50 125℃, specified ESR after endurance 150℃, case size 12.5 to 18mm Specified ESR at low temperature Bi-polar(Ask Engineering Bulletin No.624 in detail) Bi-polar(Ask Engineering Bulletin No.624 in detail) AEC-Q200 Endurance (+R=With ripple) Long life Terminal type Features Low Z Series Standard Type ■ALUMINUM ELECTROLYTIC CAPACITORS : Recommendation products AEC-Q200 : A EC-Q200 compliant. Please contact your local Chemi-Con office for more details, test data, information and also non indicated products. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CAPACITOR SERIES TABLE, CONTENTS AEC-Q200 Long life High temperature Low Z Terminal type Endurance (+R=With ripple) Rated voltage range (Vdc) SRG φ10×9 to φ18×25mm, low profile Radial 85℃ 2,000 hours KRG φ10×9 to φ18×25mm, low profile Radial 105℃ 1,000 hours 6.3 to 50 SMQ 85℃, downsizing Radial 85℃ 2,000 hours 6.3 to 450 KMQ 105℃, downsizing Radial 105℃ 1,000 to 2,000 hours +R 6.3 to 450 SMG 85℃, standard Radial 85℃ 2,000 hours KMG 105℃, standard Radial 105℃ 1,000 to 2,000 hours +R 6.3 to 450 SME-BP Bi-polar, downsizing Radial 85℃ 2,000 hours 6.3 to 100 KME-BP Bi-polar, downsizing (Ask Engineering Bulletin No.866 in detail) Radial 105℃ 1,000 hours 6.3 to 100 KZN Upgrade! Long life, low impedance Radial 105℃ 6,000 to 10,000 hours +R 6.3 to 100 KZM Long life, super low impedance Radial 105℃ 6,000 to 10,000 hours +R 6.3 to 50 KZH Super low impedance, downsizing Radial 105℃ 5,000 to 6,000 hours +R 6.3 to 35 KZE Low impedance, downsizing Radial 105℃ 2,000 to 5,000 hours +R 6.3 to 100 KYC Low ESR, downsizing Radial 105℃ 3,000 to 5,000 hours +R 16 to 50 KYB Low impedance, downsizing Radial 105℃ 4,000 to 10,000 hours +R 6.3 to 100 KYA Low impedance, downsizing Radial 105℃ 4,000 to 10,000 hours +R 6.3 to 100 KY Low impedance, standard Radial 105℃ 4,000 to 10,000 hours +R 6.3 to 100 LZA Low impedance, downsizing Radial 105℃ 4,000 to 7,000 hours +R 6.3 to 35 LXZ Low impedance, downsizing Radial 105℃ 2,000 to 8,000 hours +R 6.3 to 63 LXY Low impedance Radial 105℃ 2,000 to 8,000 hours +R 10 to 63 LXV Low impedance Radial 105℃ 2,000 to 5,000 hours +R 6.3 to 100 KXN New! Long life, downsizing, for input filtering Radial 105℃ 10,000 to 12,000 hours +R 420 & 450 KXL Long life, downsizing, for input filtering Radial 105℃ 10,000 to 12,000 hours +R 400 to 450 KXJ Long life, downsizing, for input filtering Radial 105℃ 8,000 to 12,000 hours +R 160 to 500 KXG Long life, downsizing, for input filtering Radial 105℃ 8,000 to 10,000 hours +R 160 to 450 KWB Low profile, long life for input filtering Radial 105℃ 5,000 hours +R 400 to 450 KWA Low profile, long life for input filtering Radial 105℃ 5,000 hours +R 400 to 450 KHF Low profile, high ripple for input filtering Radial 105℃ 3,000 hours +R 400 to 450 KHE Low profile, high ripple for input filtering Radial 105℃ 2,000 hours +R 400 to 450 PAG Low profile, for input filtering Radial 105℃ 2,000 hours +R 200 to 450 KLJ No sparks with DC overvoltage, for input filtering Radial 105℃ 2,000 hours +R 200 to 450 KXF Long life, downsizing, for input filtering Radial 105℃ 15,000/20,000 hours +R 160 to 450 KXE Long life, downsizing, for input filtering Radial 105℃ 10,000 to 12,000 hours +R 160 to 400 LE Long life, downsizing Radial 105℃ 10,000 hours +R 10 to 100 GPA 125/150℃, downsizing (Guaranteed short time at 150℃) Radial 125℃ 3,000 to 5,000 hours +R 25 to 100 GVA 125℃, high vibration resistance Radial 125℃ 5,000 hours+R 25 to 100 GXF 125℃, high ripple Radial 125℃ 3,000 hours +R 25 to 400 125℃, low impedance, downsizing Radial 125℃ 2,000 to 5,000 hours +R 10 to 450 125℃ Radial 125℃ 5,000 hours +R 10 to 50 GPD 135/150℃, high ripple (Guaranteed short time at 150℃) Radial 135℃ 2,000 to 3,000 hours +R 25 to 100 GVD 135℃, high vibration resistance Radial 135℃ 2,000 to 3,000 hours+R 25 to 100 GQB 150℃, high ripple Radial 150℃ 1,000 hours +R 25 & 35 LBV For airbag, downsizing Radial 105℃ 5,000 hours +R 25 & 35 LBK Special Application LBG For airbag, downsizing (Ask Engineering Bulletin No.820 in detail) Radial 105℃ 5,000 hours +R 25 & 35 For airbag Radial 105℃ 5,000 hours +R 25 & 35 For photo flash Radial 55℃ 5,000 times charging 300 to 330 Low Profile General Purpose Power Supply Output, Low Impedance Radial Lead Type Features Miniaturization Low profile type Series Standard Type ■ALUMINUM ELECTROLYTIC CAPACITORS Power Supply Input Power Supply Output GXE High Temperature GXL PH (Ask Engineering Bulletin No.865 in detail) 6.3 to 50 6.3 to 450 : Recommendation products AEC-Q200 : AEC-Q200 compliant. Please contact your local Chemi-Con office for more details, test data, information and also non indicated products. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CAPACITOR SERIES TABLE, CONTENTS Snap-in Type General Purpose Low Profile Screw-Mount Type Long life Endurance (+R=With ripple) Rated voltage range (Vdc) 85℃, high ripple, downsizing 85℃, standard 105℃, super downsizing 105℃, super downsizing 105℃, super downsizing 105℃, downsizing 105℃, standard 85℃, 5,000 hours , high ripple 85℃, high ripple 105℃, high ripple 85℃, 3,000 hours 105℃, high ripple 105℃, high ripple 105℃, downsizing 105℃, downsizing 105℃, 3,000 hours Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin Pin 85℃ 2,000 hours +R 85℃ 2,000 hours +R 105℃ 2,000 hours +R 105℃ 2,000 hours +R 105℃ 2,000 hours +R 105℃ 2,000 hours +R 105℃ 2,000 hours +R 85℃ 5,000 hours +R 85℃ 3,000 hours +R 105℃ 3,000 hours +R 85℃ 3,000 hours +R 105℃ 3,000 hours +R 105℃ 3,000 hours +R 105℃ 3,000 hours +R 105℃ 3,000 hours +R 105℃ 3,000 hours +R 400 to 450 160 to 450 400 to 450 420 & 450 400 to 450 160 to 450 35, 50, 160 to 450 180 to 250 180 to 250 180 to 250 160 to 450 400 to 450 420 & 450 450 to 500 160 to 600 160 to 450 85℃, standard Pin 85℃ 2,000 hours +R 6.3 to 100 KMH 105℃, standard Pin 105℃ 2,000 hours +R 6.3 to 100 KLM 15mm height, low profile (Ask Engineering Bulletin No.855 in detail) Pin 105℃ 2,000 hours +R 160 to 400 Long life Long life, downsizing Long life, high ripple Long life, downsizing Long life, downsizing Long life, downsizing Long life 125℃, high temperature No sparks with DC overvoltage Pin Pin Pin Pin Pin Pin Pin Pin Pin 105℃ 10,000 hours +R 105℃ 7,000 hours +R 105℃ 5,000 hours +R 105℃ 5,000 hours +R 105℃ 5,000 hours +R 105℃ 5,000 hours +R 105℃ 5,000 hours +R 125℃ 3,000 hours +R 105℃ 2,000 hours +R 200 to 450 160 to 450 400 to 450 450 to 500 160 to 600 160 to 450 10 to 100 400 & 450 200 to 450 No sparks with DC overvoltage (Ask Engineering Bulletin No.856 in detail) Pin 105℃ 3,000/5,000 hours +R 200 & 400 For charge and discharge application Pin 105℃ 3,000 hours +R 350 to 450 85℃, standard Screw 85℃ 2,000 hours +R 10 to 100 105℃, downsizing 105℃, standard High capacitance High ripple, downsizing Long life, high ripple, downsizing Screw Screw Screw Screw 105℃ 2,000 hours +R 105℃ 2,000 hours +R 85℃ 5,000 hours +R 85℃ 5,000 hours +R 315 to 450 10 to 400 400 & 450 350 to 450 Screw 85℃ 5,000 hours +R 350 to 450 Long life, high ripple High capacitance High ripple, downsizing High ripple, downsizing High ripple Long life, high ripple, low cost Screw Screw Screw Screw Screw 85℃ 5,000 hours +R 85℃ 2,000 hours +R 85℃ 2,000 hours +R 85℃ 2,000 hours +R 85℃ 2,000 hours +R 350 to 450 400 & 450 350 to 450 350 to 550 350 to 550 Screw 85℃ 5,000 hours +R 350 to 450 Long life, high ripple Screw Screw Screw Screw Screw Screw Screw 85℃ 20,000 hours +R 85℃ 2,000 hours +R 85℃ 5,000 hours +R 85℃ 5,000 hours +R 105℃ 2,000/5,000 hours +R 105℃ 5,000 hours +R 85℃ 5,000 hours +R 350 to 450 575 to 700 500 to 650 63 to 450 10 to 525 350 to 450 350 to 450 (Ask Engineering Bulletin No.585 for 160 to 450V) (Ask Engineering Bulletin No.584 for 160 to 450V) SME KMQ KMH RWX New! RWH (Ask Engineering Bulletin No.548 for 160 to 250V) RWG For Inverter Terminal type SMR SMQ KHE New! KMZ Upgrade! KMW KMR KMQ RLB RLA KLA SMM KHJ KMT KHS KMS Upgrade! KMM SMH TXH LXM LHJ New! High LHS Upgrade! Temperature LXS LXQ LXG GXA New! CHA Special Application LXH KMV General Purpose High ripple Features Miniaturization Low profile type Series Standard Type ■ALUMINUM ELECTROLYTIC CAPACITORS RWF RWU RWR RWQ RWE (Ask Engineering Bulletin No.747 in detail) New! RWY (Ask Engineering Bulletin No.661 in detail) RWL RHB RHA FTP LXA LXR RWV 85℃, high voltage High voltage, high ripple Ovalized can shape, high ripple 105℃, long life 105℃, long life, high ripple For charge and discharge application Screw-Mount Type U37F U37L For Inverter U37X UTOR Long life High ripple Features Standard Type Series Miniaturization Low profile type ■ALUMINUM ELECTROLYTIC CAPACITORS (UNITED CHEMI-CON, INC. Products) Long life, high ripple Long life, high ripple Long life, high ripple Toroidal shape, long life, high ripple Terminal type Screw Screw Screw Screw Endurance (+R=With ripple) 85℃ 5,000 hours +R 85℃ 10,000 hours +R 85℃ 15,000 hours +R 105℃ 5,000 hours +R Rated voltage range (Vdc) 350 to 500 350 to 500 350 to 500 350 to 500 For Audio MAR MAK ASG AVH AWJ SNX-BP AJ Features MELODIO MELODIO MELODIO MELODIO Surface mount type 105℃, surface mount type Standard, downsizing Standard High grade General purpose speaker network For input filtering, snap-in type Miniaturization Low profile type Series Standard Type ■ALUMINUM ELECTROLYTIC CAPACITORS FOR AUDIO Terminal type SMD SMD Radial Radial Radial Radial Pin Endurance (+R=With ripple) 85℃ 2,000 hours 105℃ 1,000 hours 85℃ 2,000 hours 85℃ 1,000 hours 85℃ 1,000 hours 85℃ 1,000 hours 85℃ 1,000 hours Rated voltage range (Vdc) 6.3 to 50 6.3 to 50 6.3 to 100 6.3 to 100 16 to 100 63 25 to 125 : Recommendation products Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart PART NUMBERING SYSTEM Part numbering system Our part numbering system is common to all of Nippon Chemi-Con's subsidiaries worldwide, and has been switching the conventional part numbering system. The part number uses 18-digit codes to express information of principal product specifications such as product category, series name, rated voltage, capacitance, case size and RoHS compliance. ●Categories 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 S P T - 0 1 B R 0 5 K M 3 N 0 T 0 0 Code Details A H E Conductive Polymer Aluminum Solid Capacitors (Polar) Conductive Polymer Hybrid Aluminum Electrolytic Capacitors (Polar) Aluminum Electrolytic Capacitors (Polar) B K F D Aluminum Electrolytic Capacitors (Bi-polar) Multilayer Ceramic Capacitors Film Capacitors Electric Double Layer Capacitors T Metal Oxide Varistors L Amorphous Choke Coils * For digits 2 to 18, please see "Product code guide". ●Example Product type Part number (Example) Conventional part number (Ref.) Surface mount type EMVE160ADA100MD55G MVE16VC10MD55E0 Radial lead type EKMQ6R3ETC102MHB5D TC04RKMQ6. 3VB1000MF50E0 Snap-in type EKMQ201VSN471MP30S KMQ200VSSN470M22BE0 Screw mount terminal type ERWE551LGC821MCD0U RWE550LGSN820MCC13EA Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart ENVIRONMENTAL CONSIDERATION Environment friendly capacitors Nippon Chemi-Con has been taking proactive approaches toward developing and marketing less environmentallyload products in response to the international efforts for reducing hazardous substances and to the regulations. Nippon Chemi-Con had already abolished 4 additional substances, which will be prohibited from July 2019 in accordance with revised RoHS directive（2011/65/EU）, by innovating alternative materials of the outer tube. RoHS2 Compliant ：Compliant to the 2011/65/EU and the revisions (2015/863/EU) ELV Compliant ：Compliant to the 2000/53/EC and the revisions (2016/774/EU) Please contact us for more information about "Halogen-free specification". ◆Pb-free and Non-PVC Products 1. Lead wire (Plating) Category Conductive Polymer Aluminum Solid Capacitors Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Resin-Molded Chip Sn Chip Sn-Bi Radial Sn Chip Sn-Bi Radial Sn Chip Aluminum Electrolytic Capacitors Plating material on lead wires Radial case code : D55 to JA0 Sn-Bi case code : KE0 to MN0 Sn case dia : to φ8 Sn-Bi case dia :φ10 to Sn Snap-in Sn Screw-Mount Originally lead-free *Please consult with us when you need "Pb-free parts" other than the above mentioned terminal plating materials. (Note) Sn : Tin, Bi : Bismuth 2. Sleeve Category Resin-Molded Chip Conductive Polymer Aluminum Solid Capacitors Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Aluminum Electrolytic Capacitors Sleeve material Sleeveless（Resin-Molded case） Chip Sleeveless（Coating case） Radial Sleeveless（Coating case） Chip Sleeveless（Coating case） Radial Sleeveless（Coating case） Chip Sleeveless（Coating case） Radial PET Snap-in PET Screw-Mount PVC *Please consult with us when you need "Non-PVC parts" other than the above mentioned outer sleeve materials. The colors of a PET sleeve are "Black", "Brown", and "Dark blue". Standard designs of "Pb-free" Snap-in type are not equipped with a plastic disc. Please consult with us when you need nonflammable grade for outer sleeve material. Identification of friendly parts is given by a supplement code (18th digit) of the part number. For details, please refer to "Product code guide" for each type. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart PACKAGING TAPING SPECIFICATIONS (Applicable standard JIS C 0806-3) SURFACE MOUNT TYPE (TAPING) ◆CARRIER TAPE [mm] φ1.5 +-00.1 4±0.1 2±0.1 1.75±0.1 2±0.05 0.1 φ1.5 + -0 0.6max. 0.6max. B B A A P P Fig.5 1.75±0.1 Fig.2 4±0.1 0.6max. φ1.5 +0.1 -0 2±0.1 0.6max. B S B B W F W F 2±0.1 4±0.1 (If W=12, 2±0.05) φ1.5 +-00.1 t Feed direction t Feed direction 1.75± 0.1 W F W F 4±0.1 Fig.4 1.75±0.1 Fig.1 P A t Feed direction P Feeding hole 0. 75 ± 0. 1.75±0.1 φ1.5 +-00.1 2±0.1 0.6max. Feeding hole B W F 4±0.1 05 Feed direction Fig.3 t 0.2±0.05 A A P t Feed direction [mm] Series AlchipTM MVA／MVE MZS／MZL MZR／MZJ MZA／MVY MZF／MZE MZK／MLA MLF／MLE MLK／MVL MVJ／MXB MHS／MVH MHL／MHB MHJ／MHK MKB NPCAPTM PMF PXN／PXT PXJ／PXG PXK／PXS PXF／PXE PXA／PXD PXH Hybrid HXE／HXJ HXC／HXD HXA／HXB Items D55 D60,D61 D73 E40 E46 E55 E60,E61 E73 F30 F45,F46 F55 F60,F61 F73 F80 F90 FA0 H63 H70 H80 HA0 HC0 J80 JA0 JC0 KE0 KG5 KN0 LH0 LN0 MH0 MN0 W A B F P t S ±0.3 ±0.2 ±0.2 ±0.1 ±0.1 ±0.2 ±0.1 12.0 12.0 12.0 12.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 32.0 32.0 32.0 44.0 44.0 44.0 44.0 4.7 4.7 4.6 5.7 5.7 5.7 5.7 5.7 7.5 7.0 7.0 7.0 7.0 7.0 7.0 7.0 8.7 8.7 8.7 8.7 8.7 10.7 10.7 10.7 13.4 13.4 13.4 17.5 17.5 19.5 19.5 4.7 4.7 4.6 5.7 5.7 5.7 5.7 5.7 8.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 8.7 8.7 8.7 8.7 8.7 10.7 10.7 10.7 13.4 13.4 13.4 17.5 17.5 19.5 19.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 14.2 14.2 14.2 20.2 20.2 20.2 20.2 8.0 8.0 8.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 16.0 24.0 24.0 24.0 28.0 28.0 32.0 32.0 5.7 6.3 7.5 4.4 4.9 5.7 6.3 7.5 3.7 4.9 5.7 6.3 7.5 8.2 9.2 10.3 6.8 7.3 8.3 11.0 12.7 8.3 11.0 12.8 14.0 16.5 22.1 16.8 22.1 17.1 22.1 － － － － － － － － － － － － － － － － － － － － － － － － 28.4 28.4 28.4 40.4 40.4 40.4 40.4 Fig. 1 1 1 2 2 2 2 2 3 2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 5 5 5 5 5 5 5 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart PACKAGING ◆QUANTITY PER REEL/BOX ◆REEL DIMENSIONS [mm] Series Feed Direction Hybrid HXE／HXJ HXC／HXD HXA／HXB φ50min. W1 AlchipTM MVA／MVE MZS／MZL MZR／MZJ MZA／MVY MZF／MZE MZK／MLA MLF／MLE MLK／MVL MVJ／MXB MHS／MVH MHL／MHB MHJ／MHK MKB 13±0.5 φ382max. ◆POLARITY AlchipTM -MVA／MVE／MZS／MZL MZR／MZJ／MZA MVY／MZF／MZE MZK／MLA／MLF MLE／MLK／MVL MVJ／MXB／MHS MVH／MHL／MHB MHJ／MHK／MKB TM NP CAP -PMF PXN／PXT／PXJ／PXG PXK／PXS／PXF／PXE PXA／PXD／PXH Hybrid -HXE／HXJ／HXC／HXD HXA／HXB D55,D60,D61 D73 E55,E60,E61 E73 F55,F60,F61,F73 F80 F90 H63 HA0 JA0 KE0 KG5 KN0 LH0 LN0 MH0 MN0 E40,E46,E60,E61 F30,F45,F46,F60,F61 F80 FA0 H70 H80 HA0 HC0 J80 JA0 JC0 NPCAPTM PMF PXN／PXT PXJ／PXG PXK／PXS PXF／PXE PXA／PXD PXH Quantity (pcs/box) 10,000 7,500 5,000 5,000 5,000 4,500 4,000 5,000 1,500 1,500 750*1 600*1 450 350*1 250*1 300*1 200*1 10,000 7,000 6,300 5,250 6,000 5,400 3,000 1,200 3,000 3,000 1,200 W1 (mm) 14 14 14 18 18 18 18 18 26 26 34 34 34 46 46 46 46 14 18 18 18 26 26 26 26 26 26 26 *1：Changed the packing quantity.（Size Code : KE0 to MN0） SURFACE MOUNT TYPE (TRAY) ◆DIMENSIONS [mm] Quantity (pcs/reel) 2,000 1,500 1,000 1,000 1,000 900 800 1,000 500 500 250*1 200*1 150 175*1 125*1 150*1 100*1 1,000 1,000 900 750 1,000 900 500 400 500 500 400 Size code ●TRAY CODE : TR 230 320 W1 H H1 Size code H [mm] W1 [mm] H1 [mm] Quantity [pcs/tray] Quantity [pcs/box] KE0 & KG5 21.0 284 18.5 120 600 LH0 & LN0 28.0 284 24.0 80 400 MH0 & MN0 28.0 284 24.0 60 300 VIBRATION RESISTANT STRUCTURE (Terminal code : G) ◆DIMENSIONS [mm] Terminal code : G ●Size code : F61 to JH0 ◆RECOMMENDED SOLDER LAND c ● W 0.3max. The vibration resistant model supports the vibration condition of 30G. Since vibration is affected by solder thickness and other characteristics and conditions, please contact us for details. b P a C±0.2 B±0.2 φD±0.5 (b) b (a) Note : L±0.5 for HA0 to JH0 Size code : KE0 to MN0 ● Solder land on PC board A±0.2 L±0.3 (Note) : Dummy terminals W 0.3max. P C±0.2 B±0.2 φD±0.5 (b) (a) L±0.5 A±0.2 : Dummy terminals Solder land (mm) Dimensions of products (mm) Size code D L A B C W P (a) (b) a b c F61 F80 HA0 JA0 JC5 JH0 KE0 KG5 KN0 LH0 LN0 MH0 MN0 6.3 6.3 8.0 10.0 10.0 10.0 12.5 12.5 12.5 16.0 16.0 18.0 18.0 5.8 7.7 10.0 10.0 12.5 16.5 13.5 16.0 21.5 16.5 21.5 16.5 21.5 6.6 6.6 8.3 10.3 10.3 10.3 13.0 13.0 13.0 17.0 17.0 19.0 19.0 6.6 6.6 8.3 10.3 10.3 10.3 13.0 13.0 13.0 17.0 17.0 19.0 19.0 7.2 7.2 9.0 11.0 11.0 11.0 13.7 13.7 13.7 18.0 18.0 20.0 20.0 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.9 1.9 3.1 4.5 4.5 4.5 4.2 4.2 4.2 6.5 6.5 6.5 6.5 (0.7) (0.7) (0.5) (0.5) (0.5) (0.5) (1.3) (1.3) (1.3) (2.0) (2.0) (2.0) (2.0) (1.4) (1.4) (1.8) (2.1) (2.1) (2.2) (3.0) (3.0) (3.0) (3.0) (3.0) (4.0) (4.0) 1.9 1.9 3.1 4.5 4.5 4.0 3.4 3.4 3.4 4.7 4.7 4.7 4.7 3.5 3.5 4.2 4.4 4.4 4.7 6.3 6.3 6.3 7.8 7.8 8.8 8.8 ( 3.3 3.3 3.5 3.5 3.5 3.8 9.3 9.3 9.3 9.6 9.6 9.6 9.6 ); Ref. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart PACKAGING RADIAL LEAD TYPE TAPING SPECIFICATIONS (Applicable standard JIS C 0806-2) Conductive Polymer Aluminum Solid Capacitors Conductive Polymer Hybrid Aluminum Electrolytic Capacitors ◆DIMENSION [mm] Δh2 Δh1 P Taping Code : TX Fig.2 Δh2 Δh1 P2 A Δh2 φD φD=φ6.3 to 10 H1 φD=φ5 Δh2 Δh1 P Taping Code : TD φD H1 Δh1 P2 A Fig.1 T T P0 P0 Base tape Taping Case size Code φD A tol. ― ― TX 5 Nominal Code 0.7±0.2 W W W0 W2 φd W1 0.7±0.2 W1 F P1 H W2 W0 H φd F P1 P1 P2 F W W0 W1 W2 H1 φD0 △h1 △h2 t T ― ±0.05 ±1.0 ±0.2 ±0.7 ±1.0 ＋0.8 −0.2 ±0.5 min. ±0.5 max. ±0.75 max. ±0.2 ±0.2 ±0.2 ±0.3 ±1.0 8 0.45*1 12.7 12.7 5.35 6.35 2.0*2 18 10 9.0 2.5 18.5 28.25 4.0 0 0 0.7 0 6.3 5 0.45 12.7 12.7 5.1 6.35 2.5 18 10 9.0 2.5 18.5 28.25 4.0 0 0 0.7 0 2 6.3 8 0.6 12.7 12.7 5.1 6.35 2.5 18 10 9.0 2.5 18.5 28.75*1 4.0 0 0 0.7 0 2 8 8 0.6 12.7 12.7 4.6 6.35 3.5 18 10 9.0 2.5 20.0 29.75 4.0 0 0 0.7 0 2 8 11.5 0.6*1 12.7 12.7 4.6 6.35 3.5 18 10 9.0 2.5 20.0 33.75 4.0 0 0 0.7 0 2 8 16 0.6 12.7 12.7 4.6 6.35 3.5 18 10 9.0 2.5 20.0 38.25 4.0 0 0 0.7 0 2 8 20 0.6 12.7 12.7 4.6 6.35 3.5 18 10 9.0 2.5 20.0 42.25 4.0 0 0 0.7 0 2 10 10.5 0.6 12.7 12.7 3.85 6.35 5.0 18 10 9.0 2.5 18.5 30.75 4.0 0 0 0.7 0 2 φd 1 H 4.0±0.2 Adhesive tape P0 TD P Base tape 4.0±0.2 Adhesive tape Fig 1 10 11.5 0.6* 12.7 12.7 3.85 6.35 5.0 18 10 9.0 2.5 18.5 32.25 4.0 0 0 0.7 0 2 10 12.5 0.6 12.7 12.7 3.85 6.35 5.0 18 10 9.0 2.5 18.5 33.25 4.0 0 0 0.7 0 2 10 16 0.6 12.7 12.7 3.85 6.35 5.0 18 10 9.0 2.5 18.5 36.75 4.0 0 0 0.7 0 2 10 20 0.6 12.7 12.7 3.85 6.35 5.0 18 10 9.0 2.5 18.5 40.75 4.0 0 0 0.7 0 2 * 1 : Each product family has different value. Please refer to each page. * 2 : For case sizeφ5×8 (Taping code : TX), H dimension shall be 2.0+0.5/-0.2. TAPING CODE QUANTITY PER AMMO PACK Example 1 2 3 4 Ammo pack box 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PS G 1 6 0 E TD 5 6 1 M HB5 S Typical example Case size φD L(mm) Line for tear-off φ5 L=8mm φ6.3 L=5 & 8mm L=8 to 11.5mm φ8 L=16mm L=20mm L=10.5 to 12.5mm φ10 L=16mm L=20mm Supplement code Size code Capacitance tolerance code Nominal capacitance code Lead forming code (Radial lead type) Contents Taping (Radial lead) Straight(φ5) Straight(except φ5) 9th 10th T T X D Terminal code Rated voltage code Series code Category 240 285 240 240 240 190 308 308 51 51 51 56 62 51 56 62 336 336 336 336 336 337 337 337 2,000 2,000 1,000 500 800 A Code Type A B C Quantity (mm) (mm) (mm) (pcs.) B C Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart PACKAGING RADIAL LEAD TYPE TAPING SPECIFICATIONS (Applicable standard JIS C 0806-2) Aluminum Electrolytic Capacitors ◆DIMENSION [mm] ±2.0 ±2.0 H1 1.0max. 0.7±0.2 F P1 Adhesive tape 1.0 max. P0 Base tape 4.0±0.2 Adhesive tape 1.0 max. 4.0±0.2 ±2.0 W0 Code tol. Nominal 0.7±0.2 P1 P2 F W W0 W1 W2 H H0 ― ±0.05 ±1.0 ±0.2 ±0.7 ±1.0 ＋0.8 −0.2 ±0.5 min. ±0.5 max. ±0.75 ±0.5 11 to 15 0.5*1 12.7 12.7 5.1 3.85 6.35 2.5 5 18.0 10.0 9.0 1.5 18.5 16.0 5 6.3 11 to 15 0.5 12.7 12.7 6.35 2.5 5 18.0 10.0 9.0 1.5 18.5 16.0 8 11.5 to 20 0.6 12.7 12.7 4.6 3.85 6.35 3.5 5 18.0 10.0 9.0 1.5 20.0 16.0 ±0.5 max. ±0.05 ±1.0 ±0.3 ±0.7 ±1.3 ＋0.8 −0.2 ±0.5 min. ±0.5 max. ＋2.0 −0 ― 10 21 0.6*1 12.7 12.7 3.85 6.35 5 18.0 12.5 9.0 1.5 18.0 ― 0.6*1 15 15 5.0 7.5 5 18.0 12.5 9.0 1.5 18.0 ― 0.6*1 25.4 12.7 3.85 6.35 5 18.0 12.5 9.0 1.5 18.0 ― TD TC TD TD 12.5 TE 26 H1 ― 5.1 3.85 TC Nominal P0 ― TD tol. 4.0±0.2 P A TC 1.0 max. Adhesive tape Base tape φd φD TD P0 4.0±0.2 Adhesive tape Case size Taping Code W W 1.0 max. P0 Base tape W1 φd F P1 W2 0.7±0.2 W2 1.0max. W1 W0 H φD H1 1.0max. φd F P φD=φ12.5 H1 φD=φ6.3 to 12.5 P1 P2 Taping Code : TE A Taping Code : TD ±2.0 Fig.4 P φD A P2 H Fig.3 ― ― H1=H+A Check insertion machine specs. P0 Base tape W W W0 φd 0.7±0.2 W2 W1 W0 H0 H φd A A φD=φ5 1.0max. F P1 φD Taping Code : TD H1 φD=φ5 to 8 P W2 φD Taping Code : TC P2 Fig.2 W1 P H P2 Fig.1 Fig 2 1 3 1 3 1 3 3 4 * 1 : Each product family has different value. Please refer to each page. * 2 : The taping for size φ16 and φ18 is available as a custom design. * 3 : For the Taping code TD products with case diameter ≧ 12.5mm, you can also select an option (Taping code: TS) that enhanced taping packaging. TAPING CODE QUANTITY PER AMMO PACK Example 1 2 3 4 Ammo pack box 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KMQ 5 0 0 E T C 1 0 0 M E 1 1 D Typical example Case size φD L(mm) Line for tear-off L=11 to 15mm L=17mm L=11 to 15mm φ6.3 L=17mm Supplement code Size code Capacitance tolerance code Nominal capacitance code Lead forming code (Radial lead type) φ5 φ8 Code Contents Taping (Radial lead) Straight Grodual forming Straight(Skip a hole) Forming(F=5.0mm) 9th 10th T D T T E C A Type Terminal code Rated voltage code Series code Category B L=11.5 to 15mm L=17 & 20mm L≦16mm L=17 to 20mm φ10 L=21 to 25mm L=26 to 30mm L≦16mm φ12.5 L=17 to 25mm A B Quantity (mm) (mm) (pcs.) 232 235 284 284 232 235 308 308 308 308 308 308 51 60 51 55 51 60 56 62 67 71 62 67 2,000 2,000 1,000 800 500 500 328mm (φD=8 and smaller) 340mm (φD=10 and larger) Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart PACKAGING RADIAL LEAD TYPE (CUT/FORMED LEAD) The following lead configurations are available. When ordering, please indicate the type of lead configurations by using the appropriate supplement code, such as C3, FC, MC or RC in the product part number. Terminal type Size Terminal type φD φD P±0.5 φd P±0.5 ●Lead code : C3 (Cutting type) φd ●Lead code : FC (Forming Cut type) Size φD=5 to 8 5±0.5 φD=5 to 18 C Dimension (C) φD= 5 to 8: C3: 3.5±0.5(Second standard C5: 5.0±0.5) +1.0 ) φD=10 to 18: C3: 3.5±0.5(Second standard C5: 5.0 -0 2max. ● ● φd φD P±0.5 φD φD=5 to 8 2max. (2.5) ●Lead code : BC (Horizontal type)* ●Lead code : BD (Horizontal type)*3 3 P φd φD=10 to 18 3.5±0.5 ● ● ● ●Lead code : IJ (Forming Cut type) φD *1 *2 P±0.5 φd *3 φD=10 to 18 A φD 10 to 12.5 14.5 to 18 A・B 3.2±0.5 3.2±0.5 φd 0.6 0.8 P 5.0±0.5 7.5±0.5 φd Dimension (P) φ10, φ12.5 : P=5.0±0.5 φ14.5, φ16, φ18 : P=7.5±0.5 ● B P 2.5±0.5 φD φD 2.5±0.5 1max. (1.1) 1max. 2max. Dimension φD=10 to 18 4.5+1.0 -0 (1.1) 4.5+1.0 -0 Dimension (P) φ10, φ12.5 : P=5.0±0.5 φ14.5, φ16, φ18 : P=7.5±0.5 P±0.5 ●Lead code : MC (Snap-in type) φd ●Lead code : FM (Snap-in type) φD=10 to 18 3.5±0.5 Please consult with us about other terminal forming. Please refer to dimensions of each series for gas escape end seal style. Conventionally, lead forming code is used in common by (BC) for two type of the lead bent directions. We added lead forming code (BD) newly and clarified the lead bent directions. Please place an order after the choice for an appropriate lead forming code depending on condition of use. ◆DIMENSION (P) Lead forming [mm] Cutting type Snap-in type FC C3(C5) FM MC φ5 5.0 2.0 5.0 ― φ6.3 5.0 2.5 5.0 ― φ8 5.0 3.5 5.0 ― φ10 ― 5.0 ― 5.0 φ12.5 ― 5.0 ― 5.0 φ14.5 ― 7.5 ― 7.5 φ16 ― 7.5 ― 7.5 φ18 ― 7.5 ― 7.5 Size *4 Please refer to dimensions of each series for lead-wire diameter (φd). Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart PACKAGING MINIMUM ORDER QUANTITY Please order by units of minimum order quantity. ◆SURFACE MOUNT ●Vertical Series TM Alchip MVA／MVE／MZS MZL／MZR／MZJ MZA／MVY／MZF MZE／MZK／MLA MLF／MLE／MLK MVL／MVJ／MXB MHS／MVH／MHL MHB／MHJ／MHK MKB NPCAPTM PMF PXN／PXT／PXJ PXG／PXK／PXS PXF／PXE／PXA PXD／PXH Hybrid HXE／HXJ／HXC HXD／HXA／HXB Size code Taping 2,000 1,500 1,000 1,000 900 800 750 1,000 500 400 500 400 250*1 200*1 150 175*1 125*1 150*1 100*1 D55, D60, D61 D73 E40, E46, E55, E60, E61, E73 F30, F45, F46, F55, F60, F61, F73 F80, H80 F90 FA0 H63, H70 HA0 HC0 J80, JA0 JC0 KE0 KG5 KN0 LH0 LN0 MH0 MN0 Quantity (pcs) Tray (pcs/box) ― ― ― ― ― ― ― ― ― ― ― ― 600 600 ― 400 400 300 300 *1：Changed the packing quantity. (Size Code : KE0 to MN0) ◆RADIAL Size φ5 φ6.3 φ8 φ10 φ12.5 φ14.5 φ16 φ18 8L 11 to 11.5L 5L 8L 10.5 to 15L 20L max. 9L 11.5L 12.5L 16 to 20L 25L 30 to 45L 50L 16L max. 20 to 25L 30L 35 to 45L 50L 20L max. 25L 30 to 45L 50L 15L 20 to 25L 30 to 35.5L 40L 45L 50L 25L max. 30 to 50L Bagged *2 Long lead type (pcs/box) Formed lead type *3 (pcs/box) 1,000 1,000 3,000 1,000 1,000 1,000 1,000 1,000 2,000 (1,000) *4 1,000 1,000 1,000 2,000 3,000 500 500 2,000 (500) *4 3,000 (500) *4 2,000 2,000 1,000 2,000 1,000 1,000 500 1,000 1,000 2,000 1,000 1,000 1,000 1,000 500 500 500 500 500 1,000 500 500 500 500 250 250 500 1,000 500 500 500 500 250 500 250 500 250 250 500 500 250 250 Taping (pcs) 2,000 2,000 2,000 2,000 2,000 1,000 800 500 800 (500) *4 800 800 － － 500 500 － － － 250 250 － － 250 250 － － － － 250 － Tray (pcs) Cut type (C3, C5) － － － － － － 1,500 － 1,500 (－) *4 1,500 1,500 750 － 1,500 1,500 750 750 － 500 500 500 － 500 500 500 500 － － 500 500 *2 The GVA, GPD, GVD and GQB series are not compatible with bagging. They are packaged in a box. *3 The standard bagged quantity may differ depending on the terminal type or packing style. Please contact us for details. *4 Minimum order quantity for conductive polymer aluminum solid capacitors and conductive polymer hybrid aluminum electrolytic capacitors. Series φD 12.5 Aluminum Electrolytic Capacitors GVA／GPD／GVD GQB 14.5 16 18 Case size L 20 to 31.5 35 to 40 20 to 31.5 35 to 40 20 to 31.5 35 to 40 20 to 31.5 35 to 40 Boxed (pcs) Long lead type 500 300 250 200 ◆SNAP-IN 200 pieces Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart PACKAGING AVAILABLE TERMINALS FOR SNAP-IN AND SCREW-MOUNT TYPE ◦We can make the following terminal type on custom design. ◦There is a restriction for specification of product, please consult with us when the product is required. ◦Please consult with us about terminal type other than those following listed. Snap-in type [mm] Terminal, Dummy code : VNN D=φ22 toφ35 D=φ30 toφ40 Terminal, Dummy code : LIN PC board pin-out (View from Solder side) PC board pin-out (View from Solder side) 5.8±1 Vent 4.2 φD+1max. 10 φD+1max. 2-1.2×6 5 2-φ2 *1 4.5±1 Vent Terminal, Dummy code : VEN 14.2 *1 Terminal, Dummy code : VRD D=φ30, φ35 D=φ35, φ40 PC board pin-out (View from Solder side) *1 4±0.5 Vent φ2.5 B A *1 5.5±1 Vent 2-φ2 4-φ2 B : Positive, A, C : Dummy Terminal, Dummy code : VND Terminal, Dummy code : LIS D=φ35, φ40 D=φ50 PC board pin-out (View from Solder side) *1 Vent 4-φ2 B : Positive, A, C : Dummy 3-1.5×6.5 *1 15.5 A 4.0 +0.2 - 0.1 11.0 60 C 22.5 φD+1max. 5.8±1 Vent PC board pin-out (View from Solder side) φD+1max. 60 B A 60 60 C 22.5 φD+1max. 3 3. φD+1max. 10 4. 75 PC board pin-out (View from Solder side) 26.8 A : Dummy D=φ20×30 to 50L, φ22×30 to 50L Horizontal mounting Terminal, Dummy code : LCN Negative mark φD+1max. PC board pin-out (View from Solder side) 2-φ2 *1 Vent 1.5±0.1 3±1 8 8±1 *1 Negative terminal : Mesh marking *2 Use the dummy terminals for mechanical support only. The dummy terminals must not be connected to any circuit trace on PC board, be sure to electrically isolate from the negative and the positive terminals. Screw-mount type [mm] Stud mounting type D=φ63.5 to φ89 Installation Recommendation plate thickness: 3.2mm 16.5±1 Plastic disk Vent Mounting screw M12, P=1.75 φ30±0.5 φD+1.8max. Plastic nut Recommendation mounting hole: φ31±0.5 19±1 1.2±1 16±1 φ38±2 Mounting screw and case are same potential as the cathode terminal. Please careful of isolation between chassis. Please consult with us about other size. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart STANDARDIZATION The series in the following table has been deleted from this catalog. Since they will be discontinued, please use the recommended replacement series when designing new products. ◆CHIP TYPE REPLACEMENTS Discontinued series Characteristics Replacements MV 85℃ standard MVA MVK 105℃ standard MVE ◆LEAD TYPE REPLACEMENTS Discontinued series Characteristics SRM 85℃ 5mm height SRE 85℃ 5mm height KRE 105℃ 5mm height SRA 85℃ 7mm height Replacements * KMA 105℃ 7mm height KMY Low impedance, Long life KY KLG No sparks with DC overvoltage KLJ SMH 85℃ large radial SMQ/PAG KMH 105℃ large radial KMQ/PAG LLA 85℃ low leakage current FL 105℃ Low Profile, Long life ARI For Audio, 5/7mm height * * Please contact us. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart WORLD-WIDE MANUFACTURING LOCATIONS SAMYOUNG ELECTRONICS CO.,LTD. （Korea） QINGDAO SAMYOUNG ELECTRONICS CO.,LTD. （China） CHEMI-CON (WUXI) CO.,LTD. (China) Nippon Chemi-Con UNITED CHEMI-CON, INC. （USA） CHEMI-CON (MALAYSIA) SDN.BHD. （Malaysia） TAIWAN CHEMI-CON CORP. （Taiwan） P.T.INDONESIA CHEMI-CON （Indonesia） ●AVAILABLE ITEMS BY MANUFACTURING LOCATIONS (Production in Japan is excluded) Classification Series SAMYOUNG QINGDAO SAMYOUNG CHEMI-CON P.T.INDONESIA TAIWAN ELECTRONICS ELECTRONICS WUXI CHEMI-CON CHEMI-CON (Korea) (China) (China) (Indonesia) (Taiwan) Conductive Polymer PXG Al-Solid Type (SMD) PXF／PXE PXJ ● MZR／MZA／MZL MVY MZK／MLA MVJ MVH MHB／MHJ MAR SRG Radial lead KRG Low Profile SMG／KMG Radial lead General purpose SMQ／KMQ KZN Radial lead Low impedance, KZM／KZH KZE High ripple current KYB KYA／KY LXZ LXV KXJ／KXG PAG KWA GPA／GXE Radial lead High temperature GXL LE Long life Screw-mount terminal SMQ／KMQ KMR SMM／KMM KMW KMS LXM LXS／LXQ CHA KMV KMH RWF RWE RWL LXA RWQ RWV U37F／U37L／U37X UTOR UNITED CHEMI-CON (USA) ● ● ● ● ● ● Conductive Polymer PSG PSF／PSE Al-Solid Type PSC (Radial lead) MVA／MVE SMD Radial lead LBG Special Application SMR Snap-in CHEMI-CON MALAYSIA (Malaysia) ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● *1 Please be sure to contact us before ordering as our product range is continuously improved and the product you require may have been superseded. *2 Refer to our web site for factory address. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart Conductive Polymer Aluminum Solid Capacitors Return Group Chart PRECAUTIONS AND GUIDELINES (Conductive Polymer) The NPCAPTM is a Conductive Polymer Solid Aluminum Capacitor that uses highly conductive polymer electrolytic material. Please read the following in order to get the most out of your NPCAPTM capacitor. The circuits described as examples in this catalog and the "delivery specifications" are featured in order to show the operations and usage of our products, however, this fact does not guarantee that the circuits are available to function in your equipment systems. We are not in any case responsible for any failures or damage caused by the use of information contained herein. You should examine our products, of which the characteristics are described in the "delivery specifications" and other documents, and determine whether or not our products suit your requirements according to the specifications of your equipment systems. Therefore, you bear final responsibility regarding the use of our products. Please make sure that you take appropriate safety measures such as use of redundant design and malfunction prevention measures in order to prevent fatal accidents and/or fires in the event any of our products malfunction. For Conductive Polymer Hybrid Aluminum Electrolytic Capacitors, see Precautions and Guidelines (Conductive Polymer Hybrid). For Aluminum Electrolytic Capacitors, see Precautions and Guidelines (Aluminum Electrolytic Capacitors). 1 Designing Device Circuits 1) Types of Circuits Where NPCAP Capacitors are Not to be Used TM The leakage current in conductive polymer solid aluminum capacitors (hereafter called capacitors) may vary depending on thermal stresses during soldering. Avoid the use of capacitors in the following types of circuits: ① High-impedance circuits that are to sustain voltages. ② Coupling circuits ③ Time constant circuits Because the capacitance varies depending on the environment the capacitors are used in, there is a possibility that the capacitor can affect a time constant circuit where sensitivity to variation in capacitance is required. ④ Other circuits that are significantly affected by leakage current 2) Circuit Design Verify the following before designing the circuit: ① The electrical characteristics of the capacitor will vary depending on differences in temperature and frequency. You had better design after verifying the scope of these factors. ② When connecting two or more capacitors in parallel, ensure that the design takes current balancing into account. ③ When two or more capacitors are connected in series, variability in applied voltage may cause over-voltage conditions. Contact Nippon Chemi-Con before using capacitors connected in series. ④ Avoid putting heat generating parts either around the capacitor or on the reverse of the circuit board. 3) Use in High Reliable and Critical Applications Consult with us in advance of usage of our products in the following listed applications. ① Aerospace equipment ② Power generation equipment such as thermal power, nuclear power etc. ③ Medical equipment ④ Transport equipment (automobiles, trains, ships, etc.) ⑤ Transportation control equipment ⑥ Disaster prevention / crime prevention equipment ⑦ Highly publicized information processing equipment ⑧ Submarine equipment ⑨ Other applications that are not considered general-purpose applications. 4) Polarity The NPCAPTM is a polarized solid aluminum electrolytic capacitor. Do not apply either reverse voltages or AC voltages to the polarized capacitors, using reversed polarity may cause a short circuit. Refer to the catalog, product specifications or capacitor body to confirm the polarity prior to use. 5) Operating Voltage Do not apply a greater than rated voltage, if a voltage greater than the rated voltage is suddenly applied the leakage current increases causing shorting. The peak voltage of superimposed AC voltages (ripple voltages) on DC voltages must not exceed the full rated voltage. Capacitors do not require voltage derating within the category temperature. While there are specifications for surge voltages exceeding the rated voltage, usage conditions apply, and continued operation for extended periods of time under such conditions cannot be guaranteed. 6) Ripple Current Do not apply currents in excess of the rated ripple current. The superimposition of a large ripple current increases the rate of heating within the capacitor. When excessive ripple current is imposed the internal temperature increases which can shorten life and shorting may occur. 7) Operating Temperature Use within the stated category temperature range, if used outside this range, characteristics can deteriorate potentially leading to problems. 8) Charging and Discharging the Capacitor Do not use the NPCAPTM capacitor in circuits where the capacitor is repetitively charged and discharged rapidly. Repetitively charging and discharging the capacitor rapidly may reduce the capacitance or may cause damage due to internal heating. Use of a protective circuit to ensure reliability is recommended when rush currents exceed 20A. 9) Leakage current The leakage current may increase. After that, however, the leak-age current will gradually decrease by self-healing action of the dielectric oxide layer when the capacitors are applied with a voltage less than the rated voltage within the Category Temperature range. As the voltage is closer to the rated voltage and the temperature is closer to the upper limit of Category Temperature range, the leakage current decreases faster. The leakage current will increase by the following factors, ① Soldering ② Testing of high temperature exposure with no voltage applied, high temperature/humidity storage, temperature cycles, etc. 10) Failures and Service Life Based on the JIS C 5003 Standard, the failure rate for NPCAPTM capacitors (with a 60% reliability standard) is as follows: 0.5%/1,000 hours (applied the rate voltage at the upper limit of Category Temperature range) (1) Failure Modes ① The principal failure mode is wear-out failure, that is, capacitance decreases and ESR increases, and eventually the capacitors become open circuit failure. In addition, short circuit failure may happen with over-voltage and excessive current applied to the capacitors. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart PRECAUTIONS AND GUIDELINES (Conductive Polymer) ② The failure rate would be reduced by reducing ambient temperatures, ripple current and applying voltage. ③ If the short-circuited capacitor, which may be caused by over-voltages higher than the rated voltage or other conditions, has a large amount of current passed through, the aluminum can of the capacitor / resin molded case bulges and might be expelled with odor gas emitted. ④ The product contains flammable materials. If the short causes a spark it may ignite. Please be careful when installing the product, its position and the layout design. • Increase safety by using in conjunction with a protective circuit or protective equipment. • Install measures such as redundant circuits so that the failure of a part of the equipment will not cause unstable operation. (2) Service Life ① SMD (Resin-Molded chip type) , the service life depends on the thermal degradation of conductive polymer or sealing resin. ② SMD (Chip type) and radial lead type use rubber as the sealing material, so the service life depends on the thermal integrity of this rubber. When long life performance is required in actual use, please use the capacitor at lower temperature within the category temperature. 11) Capacitor Insulation Insulation of the capacitor's case is not guaranteed. Ensure electrical insulation between the capacitor case, negative electrode, positive electrode and circuit pattern. 12) Capacitor Usage Environment Do not use/expose capacitors to the following conditions. ① Oil, water, salty water, take care to avoid storage in damp locations. ② Direct sunlight ③ Toxic gases such as hydrogen, sulfide, sulfurous acids, nitrous acids, chlorine and chlorine compounds, bromine and bromine compounds, ammonia, etc. ④ Ozone, ultraviolet rays and radiation. ⑤ Severe vibration or mechanical shock conditions beyond the limits advised in the product specification section of the catalog. The standard vibration condition is applicable to JIS C 5101-4. 13) Capacitor mounting ① For the surface mount capacitor, design the solder land on the PC board in accordance with the catalog or the product specification. ② For radial capacitors, design the terminal holes on the PC board to fit the terminal dimension of the capacitor. ③ Do not pass any circuit traces beneath the seal side of a capacitor. The trace must pass 1 to 2mm to the side of the capacitor. ④ Do not pass any via holes underneath a capacitor on doublesided PC board ⑤ In designing double-sided PC boards,do not locate any copper trace under the seal side of a capacitor 2 Installing Capacitors 1) Installing ① Do not reuse capacitors already assembled in equipment that have been exposed to power. ② The capacitor may have self charge. If this happens, discharge the capacitor through a resistor of approximately 1kΩ before use. ③ If capacitors are stored at a temperature of 35℃ or more and more than 75%RH, the leakage current may increase. This may also occur if the capacitors are stored for a longer period than the period which is specified in the catalog or the product specification. In this case, they can be reformed by the voltage treatment through a resistor of approximately 1kΩ. ④ Verify the rated capacitance and voltage of the capacitors when installing. ⑤ Verify the polarity of the capacitors. ⑥ Do not use the capacitors if they have been dropped on the floor. ⑦ Do not deform the case of the capacitors. ⑧ Verify that the lead spacing of the capacitor fits the hole spacing in the PC board before installing the capacitors. ⑨ Do not apply any mechanical force in excess of the limits prescribed in the catalog or the product specification of the capacitors. Avoid subjecting the capacitor to strong forces, as this may break the electrode terminals, bend or deform the capacitor, or damage the packaging, and may also cause short/open circuits, increased leakage current, or damage the appearance. Also, note the capacitors may be damaged by mechanical shocks caused by cut the lead wire, the vacuum/insertion head, component checker or centering operation of an automatic mounting or insertion machine. 2) Heat Resistance during Soldering Ensure that the soldering conditions meet the specifications recommended by Nippon Chemi-Con. Note that the leakage current may increase or capacitance may decrease due to thermal stresses that occur during soldering, etc. Furthermore, the leakage current which rose gradually decreases, when voltage is applied at below the category upper limit temperature. Additionally the self repairing action is faster when voltage near the rated voltage rather than at a higher voltage is applied at below the category's upper temperature limit. ① Verify the following before using a soldering iron: • That the soldering conditions (temperature and time) are within the ranges specified in the catalog or product specifications. • That the tip of the soldering iron does not come into contact with the capacitor itself. ② Verify the following when flow soldering: • Do not dip the body of a capacitor into the solder bath only dip the terminals in. The soldering must be done on the reverse side of PC board. • Soldering conditions (preheat, solder temperature and dipping time) should be within the limits prescribed in the catalog or the product specifications. • Do not apply flux to any part of capacitors other than their terminals. • Make sure the capacitors do not come into contact with any other components while soldering. • Flow soldering must not be used for the SMD(Chip type) capacitors. ③ Verify the following when reflow soldering: • Soldering conditions (preheat, solder temperature and soldering time) should be within the limits prescribed in the catalogs or the product specification. • The heat level should be appropriate. (Note that the thermal stress on the capacitor varies depending on the type and position of the heater in the reflow oven, and the color and material of the capacitor.) • Please consult us about Vapor phase soldering (VPS). • Except for the surface mount type, reflow soldering must not be used for the capacitors. ④ Do not reuse a capacitor that has already been soldered to PC board and then removed. When using a new capacitor in the same location, remove the flux, etc. first, and then use a soldering iron to solder on the new capacitor in accordance with the specifications. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart PRECAUTIONS AND GUIDELINES (Conductive Polymer) 3) Handling After Soldering Do not apply any mechanical stress to the capacitor after soldering onto the PC board. ① Do not lean or twist the body of the capacitor after soldering the capacitors onto the PC board. ② Do not use the capacitors for lifting or carrying the assembly board. ③ Do not hit or poke the capacitor after soldering to PC board. When stacking the assembly board, be careful that other components do not touch the aluminum electrolytic capacitors. ④ Do not drop the assembled board. 4) Cleaning PC boards Do not wash PMF series by using any cleaning agents. ① Do not wash capacitors by using the following cleaning agents. Solvent resistant capacitors are only suitable for washing using the cleaning conditions prescribed in the catalog or the product specification. In particular, ultrasonic cleaning will accelerate damage to capacitors. • Halogenated solvents; cause capacitors to fail due to corrosion. • Alkali system solvents; corrode (dissolve) an aluminum case. • Petroleum system solvents; cause the rubber seal material to deteriorate. • Xylene and toluene; causes the rubber seal material to deteriorate. • Acetone; erases the markings. CFC alternatives or the other cleaners above; please consult with us. ② Verify the following points when washing capacitors. • Monitor conductivity, pH, specific gravity and the water content of cleaning agents. Contamination adversely affects these characteristics. • Be sure not to expose the capacitors under solvent rich conditions or keep capacitors inside a closed container. In addition, please dry the solvent sufficiently on the PC board and the capacitor with an air knife (temperature should be less than the maximum rated category temperature of the capacitor) for 10 minutes. Aluminum electrolytic capacitors can be characteristically and catastrophically damaged by halogen ions, particularly by chlorine ions, though the degree of the damage mainly depends upon the characteristics of the electrolyte and rubber seal material. When halogen ions come into contact with the capacitors, the foil corrodes when a voltage is applied. This corrosion causes an extremely high leakage current which results venting and an open circuit. If the new types of cleaning agents mentioned below are used, the following are recommended as cleaning conditions for some of new cleaning agents. -Higher alcohol cleaning agents Pine Alpha ST-100S (Arakawa Chemical) Clean Through 750 H, 750K, 750L, and 710M (Kao) Technocare FRW-14 through 17 (Momentive performance material) Cleaning Conditions: Using these cleaning agents, capacitors are capable of withstanding immersion or ultrasonic cleaning for 10 minutes at a maximum liquid temperature of 60℃. Find optimum condition for washing, rinsing, and drying. Be sure not to rub the marking off the capacitor which can be caused by contact with other components or the PC board. Note that shower cleaning adversely affects the markings on the sleeve. However, from an environmental point of view, these types of solvent will be banned in near future. We would recommend not using them if at all possible. -Isopropyl Alcohol (IPA) IPA (Isopropyl Alcohol) is one of the most acceptable cleaning agents; it is necessary to maintain a flux content in the cleaning liquid at a maximum limit of 2 Wt.%. 5) Precautions for using adhesives and coating materials ① Do not use any adhesive and coating materials containing halogenated solvent. ② Verify the following before using adhesive and coating material. • Remove flux and dust left over between the rubber seal and the PC board before applying adhesive or coating materials to the capacitor. • Dry and remove any residual cleaning agents before applying adhesive and coating materials to the capacitors. Do not cover over the whole surface of the rubber seal with the adhesive or coating materials. • For permissible heat conditions for curing adhesives or coating materials, please consult with us. • Covering over the whole surface of the capacitor rubber seal with resin may result in a hazardous condition because the inside pressure cannot be completely released. Also, a large amount of halogen ions in resins will cause the capacitors to fail because the halogen ions penetrate into the rubber seal and the inside of the capacitor. • Some coating materials, it cannot be implemented to the capacitor. Please note change on the surface might be caused according to the kind of solvents used for mounting adhesives and coating agents. 6) Fumigation In exporting or importing electronic devices, they may be exposed to fumigation with halide such as methyl bromide. Where aluminum electrolytic capacitors are exposed to halide such as methyl bromide, the capacitors will be damaged with the corrosion reaction with halogen ions in the same way as cleaning agents. For the export and import, Nippon Chemi-Con considers using some packaging method and so forth so that fumigation is not required. For customers to export or import electronic devices, semi-assembly products or capacitor components, confirm if they will be exposed to fumigation and also consider final condition of packaging. (Note that either cardboard or vinyl package has a risk of fumigation gas penetration.) 3 The Operation of Devices 1) Do not touch the capacitor terminals directly. 2) Do not short-circuit the terminal of a capacitor by letting it come into contact with any conductive object. Also, do not spill electric-conductive liquid such as acid or alkaline solution over the capacitor. 3) Do not use capacitors in circumstances where they would be subject to exposure to the following materials • Oil, water, salty water or damp location. • Direct sunlight. • Ozone, ultraviolet rays or radiation. • Toxic gases such as hydrogen sulfide, sulfurous acid, nitrous acid, chlorine or its compounds, and ammonium. • Severe vibration or mechanical shock conditions beyond the limits prescribed in the catalog or product specification. The standard vibration condition is applicable to JIS C 5101-4. -Non-Halogenated Solvent Cleaning AK225AES (Asahi Glass) Cleaning Conditions: Immersion, ultrasonic or vapor cleaning for 5 minutes. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart PRECAUTIONS AND GUIDELINES (Conductive Polymer) 4 7 Maintenance Inspection 1) Make periodic inspections of capacitors that have been used in industrial applications. Before inspection, turn off the power supply and carefully discharge the electricity in the capacitors. Verify the polarity when measuring the capacitors with a volt-ohm meter. Do not apply any mechanical stress to the terminals of the capacitors. 2) The following items should be checked during the periodic inspections. ① Significant damage in appearance ② Electrical characteristics: Leakage current, capacitance, tanδ and other characteristics prescribed in the catalog or product specification. We recommend replacing the capacitors if the parts are out of specification. 5 Contingencies 1) If gas has vented from the capacitor during use, there is a short circuit and burning, or the capacitor discharges an odor or smoke, turn off the main power supply to the equipment or unplug the power cord. 2) If there is a problem with the capacitor or a fire breaks out, the capacitor may produce a burning gas or reactive gas from the outer resin, etc. If this happens, keep your hands and face away from the gas. If vented gas is inhaled or comes into contact with your eyes, flush your eyes immediately with water and/or gargle. If vented gas comes into contact with the skin, wash the affected area thoroughly with soap and water. 6 We recommend the following conditions for storage. 1) Store capacitors in a cool, dry place. Store at a temperature between 5 and 35℃, with a humidity of 75% or less. (table-1 Maximum storage term) Before the bag is opened After the bag is opened SMD（Resin-Molded chip type） Within 2 years after manufacturing Within 7 days after the bag is opened Within 3 years after manufacturing Within 6 months after the bag is opened SMD（Chip type） Radial Please consult with a local industrial waste disposal specialist when disposing of aluminum electrolytic capacitors. 8 Within 3 years after manufacturing - SMD products are sealed in a special laminated aluminum bag. Use all capacitors once the bag is opened. Return unused capacitors to the bag, and seal it with a zipper. Please refer to (Table -1 maximum storage term) for storage conditions. Be sure to follow our recommendations for reflow soldering. 2) Store the capacitors in a location free from direct contact with water, salt water, and oil. 3) Store in a location where the capacitor is not exposed to toxic gas, such as hydrogen sulfide, sulfurous acid, nitrous acid, chlorine or chlorine compounds, bromine or other halogen gases, methyl bromide or other halogen compounds, ammonia, or similar. 4) Store in a location where the capacitor is not exposed to ozone, ultraviolet radiation, or other radiation. 5) It is recommended to store capacitors in their original packaging wherever possible. 6) The JEDEC J-STD-020 standard does not apply. About AEC-Q200 The Automotive Electronics Council (AEC) was originally established by major American automotive related manufactures. Today, the committees are composed of representatives from the sustaining Members of manufacturing companies in automotive electrical components. It has standardized the criteria for“stress test qualification”and“reliability tests”for electronic components. AEC-Q200 is the reliability test standard for approval of passive components in Automotive applications. It specifies the test type, parameters and quantity, etc. for each component. The criteria of the reliability tests such as for our main products, “Aluminum Electrolytic Capacitors”are described in this standard. Pursuant to the customer's specific testing requirements, Chemi-Con submits the test results according to AEC-Q200 for Aluminum Electrolytic Capacitors used in automotive applications on request. An electronic component manufacturer cannot simply claim that their product is“AEC-Q200 Qualified”. It can be claimed ,“Capable”,“Available” , etc., however each com“Compliant” ponent must be tested per each users“Qualification Test Plan” in order to claim AEC-Q200 status. Please contact us for more information. 9 Storage Disposal Response to the Substances of Concern 1) Nippon Chemi-Con aims for developing products that meet laws and regulations concerning substances of concern. （Some products may contain regulated substances for exempted application） Please contact us for more information about law-compliance status. 2) According to the content of REACH handbook (Guidance on requirements for substances in articles which is published on May 2008), our electronic components are“articles without any intended release” . Therefore they are not applicable for “Registration”for EU REACH Regulation Article 7 (1). Reference: Electrolytic Condenser Investigation Society “Study of REACH Regulation in EU about Electrolytic Capacitor” (publicized on 13 March 2008) 10 Catalogs Specifications in the catalogs are subject to change without notice. Test data shown in the catalogs are not assured as the whole performance values, but typical values. For more details, refer to JEITA RCR-2367D (March 2019) with the title of“Safety Application Guide for fixed aluminum electrolytic capacitors for use in electronic equipment” . Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS RECOMMENDED SOLDERING CONDITIONS FOR NPCAPTM ◆SURFACE MOUNT TYPE The following conditions are recommended for air or infrared reflow soldering PMF/PXJ/PXG/PXK/PXS/PXF/PXE/PXA/PXD/PXH series onto a glass epoxy circuit board of 90×50×0.8mm (with resist) by cream solder. The temperatures shown are the surface temperature values on the top of the can and tem per a ture of capacitor terminal. Reflow should be performed twice or less. Please ensure that the capacitor became cold enough to the room temperature (5 to 35℃) before the second reflow. ● Recommended soldering heat conditions Temperature on the top of capacitor and Temperature of capacitor terminal (℃) Peak temperature Peak 230 Max. period of time over 230℃ 217 Max. period of time over 217℃ Preheat ● Recommended Solder Land on PC Board Solder land on PC board e c c a b b a d Chip type Fig.2 F30 c b b Resin-Molded chip type Size code E40, E46, E60, E61 e f a b Location of capacitor Location of capacitor Fig.1 Time maintained Time maintained Peak temp. Reflow number above 217℃ above 230℃ 1-cycle only 50 sec. max. 40 sec. max. 260℃max. PMF 16 to 25V 40 sec. max. 30 sec. max. 2-cycles allowed 260℃max. 1-cycle only 150 to 180℃ PXN/PXT 40 sec. max. PXJ/PXG 2.5 to 16V 120 sec. max. 50 sec. max. 250 ℃max. 2-cycles allowed PXK/PXS PXF/PXE 1-cycle only 50 sec. max. 40 sec. max. PXA/PXD 20 to 25V 250℃max. 2-cycles allowed 40 sec. max. 30 sec. max. PXH Preheat Note : Resin-Molded chip type have capability to withstand dip or flow soldering (Peak temperature:260℃) . Please consult us for details. Time (sec.) b Voltage range (Vdc) Series Fig.3 Resin-Molded chip type F45, F46, F60, F61 F80, FA0 H70, H80, HA0, HC0 J80, JA0, JC0 a 1.4 1.9 1.9 b 3.0 3.5 3.5 c 1.6 2.0 2.0 d 4.0 e 2.0 f 3.0 [mm] Fig. 1 2 3 1.9 3.5 1.6 - - - 1 3.1 4.5 4.2 4.4 2.2 2.2 - - - 1 1 <Share with Ta/Al multilayer capacitors（7343 size）> ◆RADIAL LEAD TYPE ● Recommended soldering heat conditions Preheat ：150℃ 120 seconds max. Flow soldering ：260+5℃ max. 10+1 seconds max. ◆PRECAUTIONS FOR USERS Soldering method SMD (Chip type) have no capability to with stand such dip or flow soldering as totally immersing components into a solder bath. Reflow soldering Reflow the capacitors within Recommended Reflow Soldering Conditions. Verify there is no temperature stress to the capacitors because the following differences might degrade capacitors electrically and mechanically. Please consult with us if other reflow conditions are employed. 1.Location of components : Temperature increases at the edge of PC board more than the center. 2.Population of PC board : The lower the component population is, the more temperature rises. 3.Material of PC board : A ceramic-made board needs more heat than a glass epoxy-made board. The heat increase may cause damage to the capacitors. 4.Thickness of PC board : A thicker board needs more heat than a thinner board. The heat may damage the capacitors. 5.Size of PC board : A larger board needs more heat than a smaller board. The heat may damage the capacitors. 6.Solder thickness If very thin cream solder paste is to be used for SMD types, please consult with us. 7.Location of infrared ray lamps : IR reflow as well as hot plate reflow heats only on the reverse side of the PC board to lessen heat stress to the capacitors. 8.Case leakage current will increase (～mA) after the reflow process, the leakage current which rose gradually decreases when voltage is applied. 9.Please consult us about vapor phase soldering (VPS). Rework of soldering Use a soldering iron for rework. Do not exceed an iron tip temperature of 380±10℃ and an exposure time of 3±0.5 seconds. Note that the soldering rework process cannot be applied to resin-molded chip type capacitors. Mechanical stress Do not grab the capacitors to lift the PC board and give stress to the capacitor. Avoid bending the PC board. This may damage the capacitors. Cleaning assembly board Immediately after solvent cleaning, remove residual solvent with an air knife for at least 10 minutes. If the solvent is insufficiently dry, the capacitors may corrode. PMF series is not solvent resistant type. Coating on assembly board 1.Before curing coating material, remove the cleaning solvents from the assembly board. 2.Before conformal coating, a chloride free pre-coat material is recommended to decrease the stress on the capacitors. Molding with resin Internal chemical reaction gradually produces gas in the capacitor; increasing internal pressure. If the end seal of the capacitor is completely coverd by resin the gas will be unable to escape causing a potentially dangerous situation. The chlorine in resin will penetrate the end seal, reach the element, and damage of the capacitor. Glue The followings are requirements for glue. 1.A low curing temperature over a short period of time 2.Strong adhension and heat resistance after curing 3.Long shelf life 4.No corrosion Others Refer to PRECAUTIONS AND GUIDELINES(Conductive Polymer). Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Lifetime Estimation of Conductive Polymer Aluminum Solid Capacitors Subject series : PXN, PXT, PXJ, PXG, PXK, PXS, PXF, PXE, PXA, PXD, PXH, PSW, PSJ, PSG, PSK, PSF, PSE, PSC Please consult us about lifetime equations for PMF series. Conductive polymer aluminum solid capacitors are finite life electronic components like aluminum electrolytic capacitors. The lifetime is affected by ambient temperature, humidity, ripple current and surge voltage. The lifetime of aluminum electrolytic capacitors is affected mainly by the loss of electrolyte as the result of the liquid electrolyte evaporating through the rubber seal materials, resulting in capacitance drop and tanδ rise. On the other hand, the lifetime of conductive polymer aluminum solid capacitors is affected mainly by oxidation degradation of the conductive polymer caused by osmose of oxygen or the thermal degradation of the conductive polymer by ambient temperature or self-heating, resulting in ESR rise and tanδ rise. The infiltration rate of the oxygen is depend on the temperature as the liquid electrolyte evaporation and the relationship follows the Arrhenius's Law, too. Similarly, thermal degradation of the conductive polymer by self-heating follows the Arrhenius's Law, too. Therefore, the lifetime estimation has been using the theory of lifetime reducing by half at every 10℃ rise of the ambient temperature. 1. Lifetime Estimation Equation (1) can be used for estimating the lifetime of the conductive polymer aluminum solid capacitors based on the ambient temperature and the rise of internal temperature due to ripple current. To-Tx -ΔT Lx=Lo×2 10 × 2 10 ・・・・・・・・・・・・・・・・・(1) Lx ：Estimation of actual lifetime (hour) Lo ：Specified lifetime with the rated voltage at the upper limit of the category temperature (hour) To ：Maximum category temperature (℃) Tx ：Actual ambient temperature of the capacitor (℃) (Note: Tx should be 40℃ if the actual ambient temperature is below it) ΔT：Rise of internal temperature due to the rated ripple current (℃) Longer lifetime is expected by lowering the ripple current and the ambient temperature. An approximate value of ripple current-caused ΔT can be calculated using Equation (2) （ ） ΔT=ΔTo× Ix Io 2 ・・・・・・・・・・・・・・・・(2) ΔTo：Rise in internal temperature due to the rated ripple current Maximum category temperature 105℃ 125℃ Ix Io Tx≦105℃ 20℃ 20℃ ΔT0 105℃＜Tx≦125℃ ‐ 3℃ ：Operating ripple current (Arms) actually flowing in the capacitor ：Rated ripple current (Arms), frequency compensated, at the upper limit of the category temperature range To determine more accurate values of ΔT, they can be actually measured using a thermocouple. 2. Rated Ripple Current Frequency Multipliers Self-heat rise is generated by the ripple current even though the conductive polymer aluminum solid capacitors have low ESR compared to liquid based electrolyte aluminum electrolytic capacitor. The ESR value differs depending on the frequency, thus the degree of self-heat rise differs depending on the ripple current frequency. Therefore, if the actual ripple current frequency differs from the specifications stated in the standard ratings, use the value obtained by multiplying the rated ripple current multiplier to convert the rated current. Conductive polymer aluminum solid capacitors have super low ESR characteristic in high-frequency range. On the whole, ESR in low-frequency range relatively rises. Therefore, they can use only small ripple current in low-frequency range. Please ensure that excessive ripple current is not applied to the capacitors in all frequency range. 3. Restriction of estimated lifetime calculation The result calculated by the estimated lifetime formula, it is not guaranteed lifetime by Nippon Chemi-Con Corporation. When designer calculate the lifetime of apparatus, please include an ample margin in consideration to the estimated lifetime of a capacitor. When calculated lifetime result are over 15 years (131,400 hrs.) by using the estimated lifetime formula, please consider 15 years to be a maximum in considering that the sealing rubber characteristics vary during the lifetime. If 15 years or more may be required as an expected lifetime, please consult us. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart PART NUMBERING SYSTEM Product code guide (Conductive polymer Surface mount type) (Example : PXJ series, 6.3V-390µF, φ6.3×5.8L) Please refer to the following table Contents Code Conductive Polymer Series Code Type Code Tol.(%) Code PXJ PXJ SMD A ±20 M 4 5 A Terminal plating material Code Sn-Bi G 7 8 9 10 11 12 13 14 15 16 17 18 PX J 6R 3 A RA 3 9 1 M F 61 G Series code Voltage code Terminal code Taping・Tray code Capacitance code 1 2 A Category 3 Voltage(V) Code 2 2R0 2.5 2R5 4 6.3 4R0 6R3 10 100 16 6 Reel dia. Application size Code φD(mm) φ(mm) Type Capacitance tolerance Size code Supplement code φD(mm) Code L(mm) Code Cap.(µF) Code 10 100 5 E 3.0 30 380 φD=5 to 10 RA 47 470 6.3 F 3.9 40 330 φD=8 to 10 RB 100 101 8 H 4.4 45 470 471 10 J 4.5 46 1,000 102 5.7 60 160 5.8 61 20 200 6.7 70 25 250 7.7 80 9.7 A0 Plastic Reel Refer to product guide for taping specifications. 10 A0 12 C0 12.2 C0 *Refer to the appendix (Part number) for codes not listed here. Product code guide (Conductive polymer Radial lead type) (Example : PSK series, 6.3V-330µF, φ5×8L,Long Lead with bulk) Please refer to the following table Contents Code Conductive Polymer Series Code Type Code Tol.(%) Code PSK PSK Radial lead E ± 20 M A Terminal plating material Code Sn S 7 8 9 10 11 12 13 14 15 16 17 18 PSK 6R3 E L L 3 3 1 M E 08 S Series code Voltage code Terminal code Taping・Tray code Capacitance code 1 2 A Category 3 4 5 Voltage(V) Code 2 2R0 2.5 2R5 4 4R0 6.3 6R3 6 Type Capacitance tolerance Size code Supplement code φD(mm) Code L(mm) Code Contents Code Lead forming (Bulk) Long Lead LL Cap.(µF) 56 Cut(3.5mm) C3 100 Code 560 101 Cut(5.0mm) C5 470 471 6.3 F Taping Straight TD 1,000 102 8 H J 5 E 5 5.4 E 6 8 10.5 05 06 08 A5 10 100 11.5 B5 16 160 12.5 C5 20 200 16 16 25 35 250 350 20 20 Refer to product guide for taping specifications. 10 *Refer to the appendix (Part number) for codes not listed here. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Product List ◆SURFACE MOUNT (CHIP) TYPE (2 to 10Vdc) Cap （µF） Series 2Vdc Nominal Case size ESR＊1 Ripple current＊2 (φD×L) Series ＊1 2.5Vdc Nominal Case size ESR＊1 Ripple current＊2 (φD×L) Series ESR(mΩ max.)20℃, 100k to 300kHz ＊2 Rated ripple current(mArms)105℃, 100kHz 4Vdc Nominal Case size ESR＊1 Ripple current＊2 (φD×L) Series 6.3Vdc Nominal Case size ESR＊1 Ripple current＊2 (φD×L) 33 47 PXA 5×5.7 35 1380 56 PXD 5×5.8 45 1380 68 82 PXA PXA PXA PXH PXE PXA PXA PXA PXD PXH PXS PXE PXA 6.3×5.7 6.3×4.4 6.3×5.7 6.3×5.7 5×5.8 5×5.7 6.3×4.4 6.3×5.7 6.3×5.8 6.3×5.7 6.3×5.8 5×5.8 6.3×5.7 27 40 27 40 24 35 40 27 35 40 22 24 27 2400 1670 2400 2400 2500 1380 1670 2400 2400 2400 2570 2500 2400 PXT PXK PXF PXF PXF PXA PXH PXK PXN PXT PXT PXK PXS PXF PXF PXE PXA PXD PXH PXF PXE 5×5.8 6.3×4.5 5×3.9 5×4.5 5×5.8 8×6.7 8×6.7 5×5.8 5×5.8 5×5.8 6.3×5.8 6.3×4.5 6.3×5.8 5×5.8 6.3×5.8 6.3×5.8 8×6.7 8×6.7 8×6.7 6.3×7.7 6.3×7.7 26 19 20 25 12 25 30 17 30 26 26 18 22 12 10 15 25 30 30 9 14 2350 2780 2700 2100 3500 3020 3020 3390 2500 2350 2600 3200 2570 3500 3900 3160 3020 3020 3020 4200 3470 PXN PXT PXK PXF PXF PXF PXE PXE PXA PXJ PXS PXF PXE PXA PXF PXE PXA PXA PXD PXH PXN PXT PXJ PXJ PXF 6.3×5.8 6.3×5.8 6.3×5.8 6.3×5.8 6.3×7.7 8×6.7 6.3×7.7 8×6.7 10×7.7 6.3×5.8 8×6.7 8×6.7 8×6.7 8×12 8×7.7 8×7.7 8×12 10×7.7 10×7.7 10×7.7 8×6.7 6.3×7.7 6.3×7.7 6.3×9.7 8×7.7 25 26 17 10 9 10 14 14 20 10 22 10 14 12 9 13 12 20 25 25 20 22 8 10 9 2800 2600 3390 3900 4200 4500 3470 3950 4130 4900 3220 4500 3950 4770 4500 3950 4770 4130 3500 3700 3500 2850 5000 4300 4500 PXJ PXA 8×6.7 10×12.2 10 10 4500 5500 100 120 PXD 5×5.8 40 1450 150 180 220 PXE PXK PXF PXF PXA PXD PXH 5×5.8 6.3×4.5 5×3.9 5×4.5 6.3×5.7 6.3×5.8 6.3×5.7 21 19 12 25 25 30 35 2670 2780 3300 2100 2500 2500 2500 270 PXE 5×5.8 PXA 6.3×5.7 22 26 2610 2450 PXA 6.3×4.4 38 1710 PXE 5×5.8 PXA 5×5.7 PXA 6.3×5.7 PXH 6.3×5.7 22 30 26 35 2610 1490 2450 2450 PXK 6.3×4.5 PXK 5×5.8 PXA 8×6.7 PXH 8×6.7 19 17 25 30 2780 3390 3020 3020 PXT PXE 5×5.8 6.3×5.8 26 15 2350 3160 330 PXN 5×5.8 PXT 5×5.8 PXK 5×5.8 PXK 6.3×4.5 PXF 5×5.8 PXF 6.3×4.4 30 26 16 16 10 12 2500 2350 3500 3500 3900 3500 PXT 6.3×5.8 PXF 6.3×5.8 PXE 6.3×5.8 PXA 8×6.7 26 10 15 25 2600 3900 3160 3020 390 PXT PXT PXF PXF PXE PXF PXE 5×5.8 6.3×5.8 5×5.8 6.3×5.8 6.3×5.8 6.3×7.7 6.3×7.7 26 26 10 10 15 9 13 2350 2600 3900 3900 3160 4200 3600 PXT 6.3×5.8 PXK 6.3×5.8 PXF 6.3×7.7 PXE 6.3×7.7 26 17 9 14 2600 3390 4200 3470 PXF PXE PXA 8×6.7 8×6.7 10×7.7 10 14 20 4500 3950 4130 PXN PXT PXK PXF PXF PXF PXE PXE PXA PXH PXF PXE PXA 6.3×5.8 6.3×5.8 6.3×5.8 6.3×5.8 6.3×7.7 8×6.7 6.3×7.7 8×6.7 8×6.7 8×6.7 8×6.7 8×6.7 8×12 25 26 16 10 9 10 13 13 23 30 10 13 12 2800 2600 3500 3900 4200 4500 3600 4100 3100 3100 4500 4100 4770 PXS PXF PXE PXA 8×6.7 8×6.7 8×6.7 8×12 22 10 14 12 3220 4500 3950 4770 PXT 6.3×7.7 PXF 8×7.7 PXE 8×7.7 PXA 10×7.7 PXH 10×7.7 22 9 13 20 25 2850 4500 3950 4130 3700 470 560 680 PXF 6.3×5.8 12 3500 Series PXA PXE PXA PXA PXA PXD PXE PXA PXD PXH PXE 10Vdc Nominal Case size ESR＊1 Ripple current＊2 (φD×L) 5×5.7 5×5.8 5×5.7 6.3×4.4 6.3×5.7 5×5.8 5×5.8 6.3×5.7 6.3×5.8 6.3×5.7 5×5.8 40 28 40 41 31 50 28 31 40 45 28 1270 2310 1270 1560 2250 1270 2310 2250 2250 2250 2310 PXN 5×5.8 PXT 5×5.8 PXS 6.3×5.8 PXF 5×5.8 PXE 6.3×5.8 PXA 8×6.7 PXH 8×6.7 PXS 8×6.7 PXE 6.3×7.7 PXA 8×6.7 PXD 8×6.7 PXH 8×6.7 35 45 27 22 25 27 35 30 21 27 35 35 2000 2000 2320 2600 2530 2800 2800 2760 2880 2800 2800 2800 PXN 6.3×5.8 PXT 6.3×5.8 PXE 8×6.7 30 40 21 2500 2200 3220 PXN 8×6.7 PXJ 6.3×5.8 PXF 6.3×5.8 PXE 8×6.7 PXA 8×12 PXA 10×7.7 PXE 8×7.7 PXA 8×12 PXA 10×7.7 PXD 10×7.7 PXH 10×7.7 25 15 20 21 14 24 19 14 24 25 30 3300 4000 2800 3220 4420 3770 3390 4420 3770 3500 3700 PXT PXJ PXJ PXE 6.3×7.7 6.3×7.7 6.3×9.7 8×10 22 13 13 17 2850 4460 4000 4000 PXJ PXE PXA 8×6.7 10×7.7 10×12.2 15 19 12 4000 3800 5300 PXN PXA 10×7.7 10×12.2 25 12 3400 5300 PXE 10×10 13 4820 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Product List ◆SURFACE MOUNT (CHIP) TYPE (2.5 to 6.3Vdc) Cap （µF） Series 820 1000 1200 1500 2.5Vdc Nominal Case size ESR＊1 Ripple current＊2 (φD×L) PXT PXJ PXJ PXJ PXE PXE PXJ PXF PXE PXA PXH PXJ PXJ PXE PXE 6.3×7.7 6.3×5.8 6.3×7.7 6.3×9.7 8×7.7 8×12 6.3×9.7 8×7.7 8×7.7 10×7.7 10×7.7 6.3×9.7 8×6.7 10×7.7 8×10 22 10 7 10 12 9 10 9 12 19 25 10 10 13 10 2850 4900 5000 4300 4260 5400 4300 4500 4260 4240 3700 4300 4500 4450 5220 PXE PXE 10×10 10×12.2 10 9 5500 5600 PXE PXA 8×12 10×12.2 9 10 5400 5500 1800 2200 2700 Series PXA ＊1 4Vdc Nominal Case size ESR＊1 Ripple current＊2 (φD×L) 10×12.2 10 5500 Series ESR(mΩ max.)20℃, 100k to 300kHz ＊2 Rated ripple current(mArms)105℃, 100kHz 6.3Vdc Nominal Case size ESR ＊1 Ripple current＊2 (φD×L) PXE 8×10 PXE 8×12 PXE 10×7.7 12 10 14 4770 5150 4300 PXN 10×7.7 PXE 10×10 20 12 3500 5025 PXE 10×10 PXE 10×12.2 12 10 5025 5500 PXA 10×12.2 PXE PXE 8×10 10×7.7 10 14 5220 4300 PXE PXE PXA PXE 8×12 10×10 10×12.2 10×10 9 10 10 10 5400 5500 5500 5500 10×10 10 PXE PXE 10×12.2 9 10 5500 5500 5600 ◆SURFACE MOUNT (CHIP) TYPE (16 to 25Vdc) Cap （µF） Series 10 15 22 27 33 39 16Vdc Nominal Case size ESR＊1 Ripple current＊2 (φD×L) PXA PXA 5×5.7 6.3×4.4 45 45 1210 1490 PXE PXA PXG PXS PXE PXA PXH 5×5.8 6.3×5.7 5×4.5 6.3×5.8 5×5.8 6.3×5.7 6.3×5.7 35 37 50 37 35 37 50 2070 2050 1860 2050 2070 2050 2050 47 Series 20Vdc Nominal Case size ESR＊1 Ripple current＊2 (φD×L) 3300 3150 3430 3020 180 PXT PXG PXE PXA PXA PXH PXJ PXG PXE PXE PXA PXT PXJ PXJ PXJ 6.3×5.8 6.3×5.8 8×10 8×12 10×7.7 10×7.7 6.3×5.8 6.3×7.7 8×10 10×7.7 10×12.2 6.3×7.7 6.3×7.7 6.3×7.7 6.3×9.7 40 22 18 16 26 35 20 22 18 22 14 22 10 13 16 2200 3300 3890 4360 3430 3020 3500 3300 3890 3450 5050 2850 5080 4460 3500 PXN PXG PXG PXG PXE PXA PXJ 10×7.7 8×6.7 8×7.7 8×10 10×10 10×12.2 8×6.7 25 22 21 21 16 14 25 3400 3300 3400 3400 4350 5050 3600 PXG PXG 10×7.7 3900 PXG 220 270 PXG 330 390 560 820 1000 PXG PXG PXG PXG PXG PXG 8×6.7 8×10 10×7.7 10×10 10×12.2 10×10 10×12.2 22 18 20 16 12 18 12 2800 2400 2000 2000 2800 PXG 6.3×5.8 30 2800 PXJ PXG PXG 6.3×5.8 6.3×5.8 6.3×7.7 28 30 28 3000 2800 2800 PXG 8×6.7 28 3000 PXJ PXJ PXG 6.3×7.7 6.3×9.7 8×7.7 28 28 26 3040 3000 3100 PXG 8×10 24 3300 PXJ PXG PXG 8×6.7 8×10 10×7.7 38 22 25 3200 3500 3400 PXG 10×10 20 3800 30 42 45 45 30 25 22 26 35 3010 2800 2100 5×5.8 6.3×4.4 8×6.7 8×6.7 5×5.8 8×6.7 8×7.7 10×7.7 10×7.7 24 30 45 PXG PXG PXA PXH PXG PXN PXE PXA PXH 8×6.7 6.3×5.8 10×7.7 45 150 PXE PXG PXA 8×6.7 2450 2200 2390 2760 2700 2700 2700 2500 2000 3000 2490 2700 3010 2900 120 2000 PXA 40 30 28 30 24 30 40 30 45 27 24 24 24 27 100 2450 2350 1800 2450 1770 6.3×4.4 6.3×5.8 6.3×5.8 8×6.7 6.3×7.7 8×6.7 8×6.7 6.3×5.8 5×5.8 5×5.8 6.3×5.8 6.3×7.7 8×6.7 8×6.7 82 40 45 50 40 55 PXG PXS PXE PXS PXE PXA PXH PXN PXT PXG PXK PXE PXE PXS PXA PXH 10×7.7 10×7.7 40 45 1700 5×5.8 6.3×4.4 8×6.7 5×5.8 5×4.5 68 60 PXG PXG PXA PXG PXG 2000 5×4.5 1500 1300 1650 1650 35 PXG 25Vdc Nominal Case size ESR＊1 Ripple current＊2 (φD×L) 65 57 50 60 5×5.8 Series 6.3×5.7 6.3×4.4 6.3×5.7 6.3×5.7 PXN 23Vdc Nominal Case size ESR＊1 Ripple current＊2 (φD×L) PXA PXA PXA PXH 56 Series 2500 2400 PXG 6.3×5.8 25 3200 PXJ PXJ PXJ PXG PXA PXG 6.3×5.8 6.3×7.7 6.3×9.7 6.3×7.7 10×12.2 8×6.7 23 18 18 25 20 25 3300 3790 3200 3200 4320 3200 PXJ PXG PXG 8×6.7 8×7.7 8×10 28 23 23 3300 3300 3400 8×10 20 3700 10×10 18 4100 PXA 6.3×4.4 57 1300 3300 3800 4200 5400 22 3650 4100 5400 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Product List ◆RADIAL LEAD TYPE (2 to 10Vdc) ＊1 2Vdc ESR(mΩ max.)20℃, 100k to 300kHz(PSJ series : 300kHz) ＊2 Rated ripple current(mArms)105℃, 100kHz 2.5Vdc 4Vdc 6.3Vdc 10Vdc Cap Nominal Nominal Nominal Nominal Nominal （µF） Series Case size ESR＊1 Ripple ＊2 Series Case size ESR＊1 Ripple ＊2 Series Case size ESR＊1 Ripple ＊2 Series Case size ESR＊1 Ripple ＊2 Series Case size ESR＊1 Ripple ＊2 current current current current current (φD×L) (φD×L) (φD×L) (φD×L) (φD×L) 220 270 330 390 470 560 680 820 1000 PSF 6.3×8 5 5900 1200 1500 1600 2700 PSK 5×8 7 4350 PSK PSF PSJ PSJ PSK PSF PSJ PSJ PSK PSF PSC 5×8 6.3×8 5.4×8 5.4×8 5×8 6.3×8 6.3×8 6.3×8 5×8 6.3×8 8×8 7 5 4 4.5 7 5 4 4.5 7 5 7 4350 5900 5600 5200 4350 5900 6500 6200 4350 5900 6100 5 7 5 7 7 7 5 7 5 8 5900 5000 6100 6100 6100 6100 5900 6100 6100 5560 PSF 6.3×8 PSE 6.3×8 PSC 8×8 PSC 8×8 PSC 8×8 PSC 8×11.5 PSF 6.3×8 PSC 8×11.5 PSF 8×8 PSC 10×11.5 PSK 5×8 5×8 10 8 3700 4050 5900 PSE 6.3×8 PSC 8×8 8 8 4700 5700 5 7 7 5900 5000 6100 PSE 6.3×8 PSC 8×8 8 8 4700 5700 7 6100 PSF 6.3×8 PSC 10×11.5 8 7 4700 6640 PSC 10 5560 5×8 8 4050 PSF 6.3×8 5 PSF 6.3×8 PSE 6.3×8 PSC 8×8 PSC PSC 8×11.5 10×11.5 6 PSK PSK PSC 8 × 11.5 9 5650 PSC 10 × 11.5 7 6100 6640 10×11.5 ◆RADIAL LEAD TYPE (16 to 35Vdc) 16Vdc 20Vdc 25Vdc 35Vdc Cap Nominal Nominal Nominal Nominal （µF） Series Case size ESR＊1 Ripple ＊2 Series Case size ESR＊1 Ripple ＊2 Series Case size ESR ＊1 Ripple ＊2 Series Case size ESR＊1 Ripple ＊2 current current current current (φD×L) (φD×L) (φD×L) (φD×L) 56 68 82 100 120 150 180 PSF 6.3×5 24 2490 PSG 6.3×5 20 3200 PSG 6.3×5 20 3200 PSG 6.3×8 18 3460 PSG 8×8 17 3880 PSG 8×11.5 14 4970 PSG 10×11.5 12 5400 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 PSG 6.3×8 PSG 6.3×8 PSF 8×8 PSF 8×11.5 PSC 8×11.5 PSF 8×8 PSC 10×11.5 PSC 10×12.5 PSG PSG PSF PSF PSC PSG PSG PSG PSG PSG PSG PSG PSG PSG PSG PSG PSG PSG PSG 8×8 8×8 8×11.5 10×11.5 10×11.5 8×11.5 8×11.5 8×16 10×11.5 8×16 8×20 10×11.5 8×20 8×20 10×16 10×16 10×20 10×20 10×20 10 15 10 11 11 13 10 10 8 16 11 10 10 8 14 8 12 8 8 12 8 8 8 8 8 8 8 5080 3800 5000 5080 5080 4700 6100 6100 5400 4000 5400 6100 6100 6100 4970 7000 5400 7000 7500 5400 7500 7500 7700 7700 8100 8100 8100 PSG 6.3×5 30 2600 PSG PSG PSG PSG PSW PSG PSG PSG PSG PSG PSG 6.3×8 6.3×8 6.3×8 6.3×8 6.3×8 8×8 8×11.5 8×8 8×11.5 8×8 8×11.5 28 28 28 28 28 18 16 18 16 18 16 2780 2780 2780 2780 2780 3770 4650 3770 4650 3770 4650 PSW PSG PSG PSG PSG PSW PSG 8×8 8×11.5 10×11.5 8×11.5 10×11.5 8×11.5 10×11.5 18 16 14 16 14 16 14 3770 4650 5000 4650 5000 4650 5000 PSG 10×11.5 14 5000 PSG PSW 10×11.5 10×11.5 14 14 5000 5000 PSG 8×11.5 18 4380 PSG 10×11.5 16 4670 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP PMF - Surface Mount New! Series ・The new construction provides a low profile and high CV. ・Super low ESR, impedance, and high heat resistance characteristics have been secured by using highly conductive polymer electrolytic materials. ・Compatible with digitalization and high frequencies of electrical equipment with superior noise absorption. ・Excellent ESR characteristics, high ripple current, 5,000 hours at 105°C. ・Low-profile product lineup ・Outer coating: Flame-retardant epoxy resin UL94 V-0 or equivalent ・Higher reflow heat resistance ・Non-solvent resistant type ・RoHS2 Compliant ・Halogen free products ・This product can’t be used for applications related to human life (such as in-vehicle equipment). ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Damp Heat (Steady State) Surge Voltage -55 to +105℃ 16 to 25Vdc ±20% (M) Shall not exceed values shown in STANDARD RATINGS. (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) 0.12 max. Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value ESR ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 60℃, 90 to 95% RH without voltage applied. Appearance No significant damage Capacitance change ≦-20 to +40% of the initial value D.F. (tanδ) ≦200% of the initial specified value ESR ≦200% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 16 20 25 Surge voltage (Vdc) 18 23 29 Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value ESR ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the solder temperature is reduced back to 20°C to measure dip resistance after soldering has been performed under the recommended soldering conditions. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value（Voltage treatment） 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) Soldering Heat Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] ◆MARKING P EX）25V33µF F9DA E330 W A L B P*2 C *2 : The dimension P (the distance between terminals) shall be the shortest distance between the land and grounding surface. Size code A B C L W P F30 7.0±0.1 7.0±0.1 7.2±0.2 3.0 max. 1.2±0.2 3.50±0.2 ・Rated voltage symbol Rated voltage（Vdc） Symbol 16 C 20 D 25 E ・Capacitance symbol Capacitance code（ex. 33μF：330） Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PMFSeries New! - ◆PART NUMBERING SYSTEM 1 2 3 4 A PMF 5 6 7 8 9 10 A RA 11 12 13 14 15 16 17 18 M F30 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 22µF:220, 39µF:390) Taping code Terminal code Voltage code (ex. 20V:200, 25V:250) Series code Category Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS WV (Vdc) 16 20 25 Cap (µF) Size code Leakage current (µA max./after 2min.) 56 68 39 47 22 33 F30 F30 F30 F30 F30 F30 448 544 390 470 275 412 ESR Rated ripple current (mΩ max./20℃, 100k to 300kHz) (mArms/105℃, 100kHz) 40 50 45 50 50 50 2,200 2,000 2,100 2,000 2,000 2,000 Part No. APMF160ARA560MF30S APMF160ARA680MF30S APMF200ARA390MF30S APMF200ARA470MF30S APMF250ARA220MF30S APMF250ARA330MF30S ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) SMD type 120 0.05 1k 0.30 10k 0.55 50k 0.70 100k to 500k 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXN - Series ・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. ・High moisture resistance, Bias Humidity: 1,000 hours at 85℃, 85%RH ・Rated voltage range: 2.5 to 16Vdc, Capacitance range: 56～1,200μF ・Suitable for DC-DC converters, voltage regulators and decoupling applications used on PXN computer motherboards etc. ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) Higher ripple ・RoHS2 Compliant ・Halogen Free PXT ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. ◆SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Bias Humidity Surge Voltage Soldering Heat Failure Rate Characteristics -55 to +105℃ 2.5 to 16Vdc ±20% (M) Shall not exceed values shown in STANDARD RATINGS. (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) 0.12 max. Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 85℃85% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦200% of the initial specified value ESR ≦200% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 2.5 6.3 10 16 Surge voltage (Vdc) 2.9 7.2 12 18 Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the solder temperature is reduced back to 20°C to measure dip resistance after soldering has been performed under the recommended soldering conditions. Appearance No significant damage Capacitance value Within the specified tolerance range D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value (Voltage treatment) 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] ●Terminal Code : A EX) 6.3V220µF P C±0.2 B±0.2 φD±0.5 W 0.3max. L±0.3 ◆MARKING Size Code E61 F61 H70 J80 φD 5 6.3 8 10 L 5.8 5.8 6.7 7.7 A B C 5.3 5.3 5.9 6.6 6.6 7.2 8.3 8.3 9.0 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.4 1.9 3.1 4.5 N77C 220 6.3V A±0.2 PXN series is a conductive polymer aluminum solid capacitor. All conductive polymer aluminum solid capacitors, including the PXN series may temporarily exhibit increased leakage current due to heat stress during the reflow soldering process. However, applying stepped voltage under the category temperature range gradually decreases the increased leakage current to normal levels. The speed or recovery time that leakage current decreases by self-healing depends on the temperature and voltage: (The closer to category upper limit temperature and rated voltage, the more rapid the leakage current decrease). Conductive polymer aluminum solid capacitors do not utilize liquid electrolyte. Therefore it takes a longer period of time to accomplish selfhealing than aluminum electrolytic capacitors that have liquid electrolyte impregnation. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXNSeries - ◆PART NUMBERING SYSTEM 1 2 3 4 A PXN 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100µF:101, 1,200µF:122) Taping code Terminal code Voltage code (ex. 2.5V:2R5, 10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS WV (Vdc) 2.5 6.3 10 16 Cap (µF) Size code Leakage current (µA max./after 2min.) 330 560 220 330 560 1,200 120 180 270 560 56 100 150 330 E61 F61 E61 F61 H70 J80 E61 F61 H70 J80 E61 F61 H70 J80 700 700 700 700 705 1,510 700 700 700 1,120 700 700 700 1,050 ESR Rated ripple current (mΩ max./20℃, 100k to 300kHz) (mArms/105℃, 100kHz) 30 25 30 25 20 20 35 30 25 25 35 30 25 25 2,500 2,800 2,500 2,800 3,500 3,500 2,000 2,500 3,300 3,400 2,000 2,500 3,300 3,400 Part No. APXN2R5ARA331ME61G APXN2R5ARA561MF61G APXN6R3ARA221ME61G APXN6R3ARA331MF61G APXN6R3ARA561MH70G APXN6R3ARA122MJ80G APXN100ARA121ME61G APXN100ARA181MF61G APXN100ARA271MH70G APXN100ARA561MJ80G APXN160ARA560ME61G APXN160ARA101MF61G APXN160ARA151MH70G APXN160ARA331MJ80G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) SMD type 120 0.05 1k 0.30 10k 0.55 50k 0.70 100k to 500k 1.00 PXN series is a conductive polymer aluminum solid capacitor. All conductive polymer aluminum solid capacitors, including the PXN series may temporarily exhibit increased leakage current due to heat stress during the reflow soldering process. However, applying stepped voltage under the category temperature range gradually decreases the increased leakage current to normal levels. The speed or recovery time that leakage current decreases by self-healing depends on the temperature and voltage: (The closer to category upper limit temperature and rated voltage, the more rapid the leakage current decrease). Conductive polymer aluminum solid capacitors do not utilize liquid electrolyte. Therefore it takes a longer period of time to accomplish selfhealing than aluminum electrolytic capacitors that have liquid electrolyte impregnation. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXT - Series ・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. ・High moisture resistance, Bias Humidity: 1,000 hours at 85℃, 85%RH ・Rated voltage range: 2.5 to 16Vdc, Capacitance range: 100 to 820μF PXN ・Case size range :φ5×5.8L toφ6.3×7.7L ・Suitable for DC-DC converters, voltage regulators and decoupling applications used on Higher ripple computer motherboards etc. ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) PXT ・RoHS2 Compliant ・Halogen Free ◆SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Bias Humidity Surge Voltage Soldering Heat Failure Rate Characteristics -55 to +105℃ 2.5 to 16Vdc ±20% (M) Shall not exceed values shown in STANDARD RATINGS. (at 20℃, 120Hz) (at 20℃ after 2 minutes) 0.12 max. (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 85℃85% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦200% of the initial specified value ESR ≦200% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 2.5 4.0 6.3 10 16 Surge voltage (Vdc) 2.9 4.6 7.2 12 18 Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the solder temperature is reduced back to 20° C to measure dip resistance after soldering has been performed under the recommended soldering conditions. Appearance No significant damage Capacitance value Within the specified tolerance range D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value (Voltage treatment) 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] ◆MARKING ●Terminal Code : A EX) 2.5V390µF 0.3max. L±0.3 P C±0.2 B±0.2 φD±0.5 W Size Code E61 F61 F80 φD 5 6.3 6.3 L 5.8 5.8 7.7 A 5.3 6.6 6.6 B 5.3 6.6 6.6 C 5.9 7.2 7.2 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 P 1.4 1.9 1.9 T69A 390 2.5V A±0.2 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXTSeries - ◆PART NUMBERING SYSTEM 1 2 3 4 A PXT 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100µF:101, 390µF:391) Taping code Terminal code Voltage code (ex. 2.5V:2R5, 10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS WV (Vdc) 2.5 4 6.3 10 16 Cap (µF) Size code Leakage current (µA max./after 2min.) 330 390 390 560 820 270 330 390 680 150 220 220 330 560 120 220 390 100 180 270 E61 E61 F61 F61 F80 E61 F61 F61 F80 E61 E61 F61 F61 F80 E61 F61 F80 E61 F61 F80 700 700 700 700 1,020 700 700 780 1,360 700 700 700 1,030 1,760 700 1,100 1,950 800 1,440 2,160 ESR Rated ripple current (mΩ max./20℃, 100k to 300kHz) (mArms/105℃, 100kHz) 26 26 26 26 22 26 26 26 22 26 26 26 26 22 45 40 22 45 40 22 2,350 2,350 2,600 2,600 2,850 2,350 2,600 2,600 2,850 2,350 2,350 2,600 2,600 2,850 2,000 2,200 2,850 2,000 2,200 2,850 Part No. APXT2R5ARA331ME61G APXT2R5ARA391ME61G APXT2R5ARA391MF61G APXT2R5ARA561MF61G APXT2R5ARA821MF80G APXT4R0ARA271ME61G APXT4R0ARA331MF61G APXT4R0ARA391MF61G APXT4R0ARA681MF80G APXT6R3ARA151ME61G APXT6R3ARA221ME61G APXT6R3ARA221MF61G APXT6R3ARA331MF61G APXT6R3ARA561MF80G APXT100ARA121ME61G APXT100ARA221MF61G APXT100ARA391MF80G APXT160ARA101ME61G APXT160ARA181MF61G APXT160ARA271MF80G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) SMD type 120 0.05 1k 0.30 10k 0.55 50k 0.70 100k to 500k 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXJ - Series ・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. ・Rated voltage range : 2.5 to 25Vdc, Capacitance range : 56 to 1,200µF ・Case size range :φ6.3×5.8L to φ8×6.7L ・Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc. ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・Halogen Free PXJ Downsizing PXG ◆SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Bias Humidity Surge Voltage Soldering Heat Failure Rate Characteristics -55 to +105℃ 2.5 to 25Vdc ±20% (M) Shall not exceed values shown in STANDARD RATINGS. (at 20℃, 120Hz) (at 20℃ after 2 minutes) 0.12 max. (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 2.5 6.3 10 16 20 25 Surge voltage (Vdc) 2.9 7.2 12 18 23 29 Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the solder temperature is reduced back to 20°C to measure dip resistance after soldering has been performed under the recommended soldering conditions. Appearance No significant damage Capacitance value Within the specified tolerance range D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value (Voltage treatment) 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] ◆MARKING ●Terminal Code : A EX) 2.5V820µF 0.3max. L±0.3 P A±0.2 C±0.2 B±0.2 φD±0.5 W Size Code φD F61 6.3 F80 6.3 FA0 6.3 H70 8 L 5.8 7.7 9.7 6.7 A 6.6 6.6 6.6 8.3 B 6.6 6.6 6.6 8.3 C 7.2 7.2 7.2 9.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 P 1.9 1.9 1.9 3.1 J57A 820 2.5V Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXJSeries - ◆PART NUMBERING SYSTEM 1 2 3 4 A PXJ 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 Supplement code (Note 1) Size code Capacitance tolerance code Capacitance code (ex. 22µF:220, 39µF:390) Taping code Terminal code Voltage code (ex. 20V:220, 25V:250) Series code Category Please refer to "Product code guide (conductive polymer type)" （Note1）:PXJ series, 16V270μF (Rated ripple current 5,080mArms) have supplement code“J”. Terminal and terminal plating are the same as all other in PXJ series. ◆STANDARD RATINGS WV (Vdc) 2.5 6.3 10 16 20 25 Cap (µF) Size code Leakage current (µA max./after 2min.) 820 820 820 1,000 1,200 1,200 390 560 560 680 270 390 390 470 220 270 270 270 390 150 150 150 220 56 82 82 120 F61 F80 FA0 FA0 FA0 H70 F61 F80 FA0 H70 F61 F80 FA0 H70 F61 F80 F80 FA0 H70 F61 F80 FA0 H70 F61 F80 FA0 H70 1,020 1,020 1,020 1,250 1,500 1,500 1,220 1,760 1,760 2,140 1,350 1,950 1,950 2,350 704 864 864 864 1,240 600 600 600 880 280 410 410 600 ESR Rated ripple current (mΩ max./20℃, 100k to 300kHz) (mArms/105℃, 100kHz) 10 7 10 10 10 10 10 8 10 10 15 13 13 15 20 10 13 16 25 23 18 18 28 28 28 28 38 4,900 5,000 4,300 4,300 4,300 4,500 4,900 5,000 4,300 4,500 4,000 4,460 4,000 4,000 3,500 5,080 4,460 3,500 3,600 3,300 3,790 3,200 3,300 3,000 3,040 3,000 3,200 Part No. APXJ2R5ARA821MF61G APXJ2R5ARA821MF80G APXJ2R5ARA821MFA0G APXJ2R5ARA102MFA0G APXJ2R5ARA122MFA0G APXJ2R5ARA122MH70G APXJ6R3ARA391MF61G APXJ6R3ARA561MF80G APXJ6R3ARA561MFA0G APXJ6R3ARA681MH70G APXJ100ARA271MF61G APXJ100ARA391MF80G APXJ100ARA391MFA0G APXJ100ARA471MH70G APXJ160ARA221MF61G APXJ160ARA271MF80J APXJ160ARA271MF80G APXJ160ARA271MFA0G APXJ160ARA391MH70G APXJ200ARA151MF61G APXJ200ARA151MF80G APXJ200ARA151MFA0G APXJ200ARA221MH70G APXJ250ARA560MF61G APXJ250ARA820MF80G APXJ250ARA820MFA0G APXJ250ARA121MH70G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency（Hz） SMD type 120 0.05 1k 0.30 10k 0.55 50k 0.70 100k to 500k 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXG - Series ・Super low ESR, high ripple current capability ・Rated voltage range : 16 to 25Vdc, Capacitance range : 10 to 1,000µF ・Case size : φ5×4.5L toφ10×12.2L ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・Halogen Free PXG Downsized PXE ◆SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Bias Humidity Surge Voltage Soldering Heat Failure Rate Characteristics -55 to +105℃ 16 to 25Vdc ±20% (M) Shall not exceed values shown in STANDARD RATINGS. (at 20℃, 120Hz) (at 20℃ after 2 minutes) 0.12 max. (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours (E46,F45 : 3,000 hours) at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours (E46,F45 : 500 hours). Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ)and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 16 20 25 Surge voltage (Vdc) 18 23 29 Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the solder temperature is reduced back to 20°C to measure dip resistance after soldering has been performed under the recommended soldering conditions. Appearance No significant damage Capacitance value Within the specified tolerance range D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value (Voltage treatment) 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] P C±0.2 W B±0.2 φD±0.5 ●Terminal Code : A 0.3max. L±0.3 (Note) ◆MARKING A±0.2 Note : L+0.1/-0.2 for E46 and F45 L±0.5 for HA0, JA0 and JC0 Size Code E46 E61 F45 F61 F80 H70 H80 HA0 J80 JA0 JC0 L A B C φD 5 4.5 5.3 5.3 5.9 5 5.8 5.3 5.3 5.9 6.3 4.4 6.6 6.6 7.2 6.3 5.8 6.6 6.6 7.2 6.3 7.7 6.6 6.6 7.2 8 6.7 8.3 8.3 9.0 8 7.7 8.3 8.3 9.0 8 10.0 8.3 8.3 9.0 10 7.7 10.3 10.3 11.0 10 10.0 10.3 10.3 11.0 10 12.2 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 P 1.4 1.4 1.9 1.9 1.9 3.1 3.1 3.1 4.5 4.5 4.5 EX) 25V47µF G14A 47 25V Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXGSeries - ◆PART NUMBERING SYSTEM 1 2 3 4 A PXG 5 6 7 8 9 10 11 A RA 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470, 100µF:101) Taping code Terminal code Voltage code (ex. 16V:160, 20V:200) Series code Category Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS WV (Vdc) 16 20 25 Cap (µF) Size code Leakage current (µA max./after 2min.) ESR (mΩ max./20℃, 100k to 300kHz) Rated ripple current (mArms/105℃, 100kHz) Part No. 39 68 100 180 220 270 330 330 330 560 560 820 820 1,000 1,000 27 47 47 56 120 150 180 220 220 390 390 560 10 22 22 27 39 47 56 56 68 82 100 120 150 220 E46 F45 E61 F61 F80 H70 H70 H80 HA0 HA0 J80 JA0 JC0 JA0 JC0 E46 E61 F45 E61 F61 F80 H70 H80 HA0 HA0 J80 JA0 E46 E61 F45 E61 F61 F61 F61 F80 H70 H80 HA0 HA0 J80 JA0 312 544 320 576 704 864 1,050 1,050 1,050 1,790 1,790 2,620 2,620 3,200 3,200 270 188 470 224 480 600 720 880 880 1,560 1,560 2,240 125 110 275 135 195 235 280 280 340 410 500 600 750 1,100 50 40 27 22 22 22 22 21 21 18 20 16 12 18 12 55 30 42 30 25 25 25 23 23 20 22 18 60 40 45 40 30 30 30 28 28 26 24 22 25 20 1,860 2,450 3,000 3,300 3,300 3,300 3,300 3,400 3,400 3,900 3,800 4,200 5,400 4,100 5,400 1,770 2,800 2,400 2,800 3,200 3,200 3,200 3,300 3,400 3,700 3,650 4,100 1,700 2,450 2,350 2,450 2,800 2,800 2,800 2,800 3,000 3,100 3,300 3,500 3,400 3,800 APXG160ARA390ME46G APXG160ARA680MF45G APXG160ARA101ME61G APXG160ARA181MF61G APXG160ARA221MF80G APXG160ARA271MH70G APXG160ARA331MH70G APXG160ARA331MH80G APXG160ARA331MHA0G APXG160ARA561MHA0G APXG160ARA561MJ80G APXG160ARA821MJA0G APXG160ARA821MJC0G APXG160ARA102MJA0G APXG160ARA102MJC0G APXG200ARA270ME46G APXG200ARA470ME61G APXG200ARA470MF45G APXG200ARA560ME61G APXG200ARA121MF61G APXG200ARA151MF80G APXG200ARA181MH70G APXG200ARA221MH80G APXG200ARA221MHA0G APXG200ARA391MHA0G APXG200ARA391MJ80G APXG200ARA561MJA0G APXG250ARA100ME46G APXG250ARA220ME61G APXG250ARA220MF45G APXG250ARA270ME61G APXG250ARA390MF61G APXG250ARA470MF61G APXG250ARA560MF61G APXG250ARA560MF80G APXG250ARA680MH70G APXG250ARA820MH80G APXG250ARA101MHA0G APXG250ARA121MHA0G APXG250ARA151MJ80G APXG250ARA221MJA0G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency（Hz） SMD type 120 0.05 1k 0.30 10k 0.55 50k 0.70 100k to 500k 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXK - Series ・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. ・Rated voltage range : 2.5 to 16Vdc, Capacitance range : 100 to 560µF ・Suitable for DC-DC converters, voltage regulators and decoupling applications used to computer motherboards etc. ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・Halogen Free PXK Downsized PXE ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105℃ 2.5 to 16Vdc ±20% (M) Shall not exceed values shown in STANDARD RATINGS. *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance (at 20℃, 120Hz) (at 20℃ after 2 minutes) 0.12 max. (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours (F46 : 3,000 hours) at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours (F46 : 500hours). Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 2.5 4.0 6.3 16 Surge voltage (Vdc) 2.9 4.6 7.2 18 Bias Humidity Surge Voltage Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the solder temperature is reduced back to 20°C to measure dip resistance after soldering has been performed under the recommended soldering conditions. Appearance No significant damage Capacitance value Within the specified tolerance range D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value (Voltage treatment) 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) Soldering Heat Failure Rate *Note : If any doubt arises, measure the leakage current after following voltage treatment. Voltage treatment : DC rated voltage are applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] EX) 2.5V330µF P C±0.2 W B±0.2 φD±0.5 ●Terminal Code : A 0.3max. L±0.3 (Note) ◆MARKING Size Code E61 F46 F61 φD 5 6.3 6.3 L 5.8 4.5 5.8 A 5.3 6.6 6.6 B 5.3 6.6 6.6 C 5.9 7.2 7.2 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 P 1.4 1.9 1.9 K89A 330 2.5V A±0.2 Note : L+0.1/-0.2 for F46 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXKSeries - ◆PART NUMBERING SYSTEM 1 2 3 4 A PXK 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 330µF:331, 560µF:561) Taping code Terminal code Voltage code (ex. 2.5V:2R5, 6.3V:6R3) Series code Category Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS WV (Vdc) 2.5 4 6.3 16 Cap (µF) Size code Leakage current (µA max./after 2min.) 220 330 330 560 180 220 390 150 180 220 330 100 F46 E61 F46 F61 F46 E61 F61 F46 E61 F46 F61 F61 300 412 700 700 360 440 780 472 567 700 1,040 320 ESR Rated ripple current (mΩ max./20℃, 100k to 300kHz) (mArms/105℃, 100kHz) 19 16 16 16 19 17 17 19 17 18 17 24 2,780 3,500 3,500 3,500 2,780 3,390 3,390 2,780 3,390 3,200 3,390 2,490 Part No. APXK2R5ARA221MF46G APXK2R5ARA331ME61G APXK2R5ARA331MF46G APXK2R5ARA561MF61G APXK4R0ARA181MF46G APXK4R0ARA221ME61G APXK4R0ARA391MF61G APXK6R3ARA151MF46G APXK6R3ARA181ME61G APXK6R3ARA221MF46G APXK6R3ARA331MF61G APXK160ARA101MF61G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency（Hz） SMD type 120 0.05 1k 0.30 10k 0.55 50k 0.70 100k to 500k 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXS - Series ・Super low ESR, high ripple current capability ・Longer life (20,000 hours at 105℃) ・Rated voltage range : 4 to 16Vdc, Capacitance range : 39 to 560µF ・Suitable for DC-DC converters, voltage regulators and decoupling applications for computer motherboards etc. ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・Halogen Free ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105℃ 4 to 16Vdc ±20% (M) I=0.2CV Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (Vdc) *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance 0.12 max. (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 20,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ)and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 4.0 6.3 10 16 Surge voltage (Vdc) 4.6 7.2 12 18 Bias Humidity Surge Voltage Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the solder temperature is reduced back to 20°C to measure dip resistance after soldering has been performed under the recommended soldering conditions. Appearance No significant damage Capacitance value Within the specified tolerance range D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value (Voltage treatment) 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) Soldering Heat Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm]º 0.3max. L±0.3 ◆MARKING EX) 6.3V390µF P C±0.2 W B±0.2 φD±0.5 ●Terminal Code : A Size Code F61 H70 φD 6.3 8.0 L 5.8 6.7 A 6.6 8.3 B 6.6 8.3 C 7.2 9.0 W 0.5 to 0.8 0.7 to 1.1 P 1.9 3.1 S69A 390 6.3V A±0.2 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXSSeries - ◆PART NUMBERING SYSTEM 1 2 3 4 A PXS 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 39µF:390, 150µF:151) Taping code Terminal code Voltage code (ex. 6.3V:6R3, 10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS WV (Vdc) Cap (µF) Size code ESR (mΩ max./20℃, 100k to 300kHz) Rated ripple current (mArms/105℃, 100kHz) 4 560 120 220 390 120 150 39 68 82 120 H70 F61 F61 H70 F61 H70 F61 F61 H70 H70 22 22 22 22 27 30 37 30 30 27 3,220 2,570 2,570 3,220 2,320 2,760 2,050 2,200 2,760 2,900 6.3 10 16 Part No. APXS4R0ARA561MH70G APXS6R3ARA121MF61G APXS6R3ARA221MF61G APXS6R3ARA391MH70G APXS100ARA121MF61G APXS100ARA151MH70G APXS160ARA390MF61G APXS160ARA680MF61G APXS160ARA820MH70G APXS160ARA121MH70G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency（Hz） SMD type 120 0.05 1k 0.30 10k 0.55 50k 0.70 100k to 500k 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXF - Series ・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. ・Rated voltage range : 2 to 10Vdc, Capacitance range : 120 to 1,000µF ・Case size range :φ5×3.9L toφ8×7.7L ・Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc. ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・Halogen Free PXF Lower ESR PXE ◆SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Bias Humidity Surge Voltage Soldering Heat Failure Rate Characteristics -55 to +105℃ 2 to 10Vdc ±20% (M) Shall not exceed values shown in STANDARD RATINGS. (at 20℃, 120Hz) (at 20℃ after 2 minutes) 0.12 max. (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours (E40, E46, F45 : 3,000 hours ) at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours (E40, E46, F45 : 500 hours ) . Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 2.0 2.5 4.0 6.3 10 Surge voltage (Vdc) 2.3 2.9 4.6 7.2 12 Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the solder temperature is reduced back to 20°C to measure dip resistance after soldering has been performed under the recommended soldering conditions. Appearance No significant damage Capacitance value Within the specified tolerance range D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value (Voltage treatment) 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] ◆MARKING ●Terminal Code : A EX) 2.5V390µF 0.3max. L±0.3 (Note) P A±0.2 Note : L+0.1/-0.2 for E40, E46 and F45 C±0.2 B±0.2 φD±0.5 W Size Code E40 E46 E61 F45 F61 F80 H70 H80 φD 5 5 5 6.3 6.3 6.3 8 8 L 3.9 4.5 5.8 4.4 5.8 7.7 6.7 7.7 A 5.3 5.3 5.3 6.6 6.6 6.6 8.3 8.3 B 5.3 5.3 5.3 6.6 6.6 6.6 8.3 8.3 C 5.9 5.9 5.9 7.2 7.2 7.2 9.0 9.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.4 1.4 1.4 1.9 1.9 1.9 3.1 3.1 F69A 390 2.5V Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXFSeries - ◆PART NUMBERING SYSTEM 1 2 3 4 A PXF 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 330µF:331, 1,000µF:102) Taping code Terminal code Voltage code (ex. 2.5V:2R5, 10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS WV (Vdc) Cap (µF) Size code Leakage current (µA max./after 2min.) 2 680 220 220 330 330 390 390 470 560 560 560 680 1,000 330 390 470 560 680 150 150 150 220 220 270 330 330 330 390 470 560 120 270 F61 E40 E46 E61 F45 E61 F61 F80 F61 F80 H70 H70 H80 F61 F80 H70 H70 H80 E40 E46 E61 E61 F61 F80 F61 F80 H70 H70 H80 H80 E61 F61 700 700 700 700 700 700 292 352 700 420 420 510 750 396 468 564 672 816 700 700 700 700 415 510 700 623 623 737 888 1,050 240 540 2.5 4 6.3 10 ESR Rated ripple current (mΩ max./20℃, 100k to 300kHz) (mArms/105℃, 100kHz) 12 12 25 10 12 10 10 9 10 9 10 10 9 10 9 10 10 9 20 25 12 12 10 9 10 9 10 10 9 9 22 20 3,500 3,300 2,100 3,900 3,500 3,900 3,900 4,200 3,900 4,200 4,500 4,500 4,500 3,900 4,200 4,500 4,500 4,500 2,700 2,100 3,500 3,500 3,900 4,200 3,900 4,200 4,500 4,500 4,500 4,500 2,600 2,800 Part No. APXF2R0ARA681MF61G APXF2R5ARA221ME40G APXF2R5ARA221ME46G APXF2R5ARA331ME61G APXF2R5ARA331MF45G APXF2R5ARA391ME61G APXF2R5ARA391MF61G APXF2R5ARA471MF80G APXF2R5ARA561MF61G APXF2R5ARA561MF80G APXF2R5ARA561MH70G APXF2R5ARA681MH70G APXF2R5ARA102MH80G APXF4R0ARA331MF61G APXF4R0ARA391MF80G APXF4R0ARA471MH70G APXF4R0ARA561MH70G APXF4R0ARA681MH80G APXF6R3ARA151ME40G APXF6R3ARA151ME46G APXF6R3ARA151ME61G APXF6R3ARA221ME61G APXF6R3ARA221MF61G APXF6R3ARA271MF80G APXF6R3ARA331MF61G APXF6R3ARA331MF80G APXF6R3ARA331MH70G APXF6R3ARA391MH70G APXF6R3ARA471MH80G APXF6R3ARA561MH80G APXF100ARA121ME61G APXF100ARA271MF61G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency（Hz） SMD type 120 0.05 1k 0.30 10k 0.55 50k 0.70 100k to 500k 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXE - Series PXF ・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. (ESR and rated ripple current values are improved from PXA series.) ・Rated voltage range : 2.5 to 16Vdc, Capacitance range : 33 to 2,700µF ・Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc. ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・Halogen Free Lower ESR PXE Lower ESR PXA ◆SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Bias Humidity Surge Voltage Soldering Heat Failure Rate Characteristics -55 to +105℃ 2.5 to 16Vdc ±20% (M) Shall not exceed values shown in STANDARD RATINGS. (at 20℃, 120Hz) (at 20℃ after 2 minutes) 0.12 max. (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 2.5 4.0 6.3 10 16 2.9 4.6 7.2 12 18 Surge voltage (Vdc) Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the solder temperature is reduced back to 20°C to measure dip resistance after soldering has been performed under the recommended soldering conditions. Appearance No significant damage Capacitance value Within the specified tolerance range D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value (Voltage treatment) 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] 0.3max. L±0.3 (Note) P A±0.2 (Note) L±0.5 for HA0, HC0, JA0, JC0 C±0.2 W B±0.2 φD±0.5 ● Terminal Code : A ◆MARKING Size Code E61 F61 F80 H70 H80 HA0 HC0 J80 JA0 JC0 φD 5 6.3 6.3 8 8 8 8 10 10 10 L A B C 5.8 5.3 5.3 5.9 5.8 6.6 6.6 7.2 7.7 6.6 6.6 7.2 6.7 8.3 8.3 9.0 7.7 8.3 8.3 9.0 10.0 8.3 8.3 9.0 12.0 8.3 8.3 9.0 7.7 10.3 10.3 11.0 10.0 10.3 10.3 11.0 12.2 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 P 1.4 1.9 1.9 3.1 3.1 3.1 3.1 4.5 4.5 4.5 EX) 2.5V390µF E49A 390 2.5V Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXESeries - ◆PART NUMBERING SYSTEM 1 2 3 4 A PXE 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS WV (Vdc) 2.5 4 6.3 Cap (µF) Size code Leakage current (µA max./after 2min.) 180 390 470 560 560 680 820 820 1,000 1,200 1,500 1,500 2,200 2,700 100 150 270 330 390 470 560 680 1,000 1,000 1,200 1,200 1,500 1,800 1,800 100 120 220 270 330 330 390 470 820 820 820 1,200 1,500 1,500 E61 F61 F80 F80 H70 H70 H80 HC0 H80 J80 HA0 HC0 JA0 JC0 E61 E61 F61 F61 F80 H70 H70 H80 HA0 J80 HC0 JA0 JA0 JA0 JC0 E61 E61 F61 F80 F80 H70 H70 H80 HA0 HC0 J80 JA0 JA0 JC0 90.0 195 235 280 280 340 410 410 500 600 750 750 1,100 1,350 80.0 120 216 264 312 376 448 544 800 800 960 960 1,200 1,440 1,440 126 151 277 340 415 415 491 592 1,030 1,030 1,030 1,510 1,890 1,890 ESR Rated ripple current (mΩ max./20℃, 100k to 300kHz) (mArms/105℃, 100kHz) 21 15 13 13 13 13 12 9 12 13 10 9 10 9 22 22 15 15 14 14 14 13 10 14 9 10 10 10 9 24 24 15 14 14 14 14 13 12 10 14 12 12 10 2,670 3,160 3,600 3,600 4,100 4,100 4,260 5,400 4,260 4,450 5,220 5,400 5,500 5,600 2,610 2,610 3,160 3,160 3,470 3,950 3,950 3,950 5,220 4,300 5,400 5,500 5,500 5,500 5,600 2,500 2,500 3,160 3,470 3,470 3,950 3,950 3,950 4,770 5,150 4,300 5,025 5,025 5,500 Part No. APXE2R5ARA181ME61G APXE2R5ARA391MF61G APXE2R5ARA471MF80G APXE2R5ARA561MF80G APXE2R5ARA561MH70G APXE2R5ARA681MH70G APXE2R5ARA821MH80G APXE2R5ARA821MHC0G APXE2R5ARA102MH80G APXE2R5ARA122MJ80G APXE2R5ARA152MHA0G APXE2R5ARA152MHC0G APXE2R5ARA222MJA0G APXE2R5ARA272MJC0G APXE4R0ARA101ME61G APXE4R0ARA151ME61G APXE4R0ARA271MF61G APXE4R0ARA331MF61G APXE4R0ARA391MF80G APXE4R0ARA471MH70G APXE4R0ARA561MH70G APXE4R0ARA681MH80G APXE4R0ARA102MHA0G APXE4R0ARA102MJ80G APXE4R0ARA122MHC0G APXE4R0ARA122MJA0G APXE4R0ARA152MJA0G APXE4R0ARA182MJA0G APXE4R0ARA182MJC0G APXE6R3ARA101ME61G APXE6R3ARA121ME61G APXE6R3ARA221MF61G APXE6R3ARA271MF80G APXE6R3ARA331MF80G APXE6R3ARA331MH70G APXE6R3ARA391MH70G APXE6R3ARA471MH80G APXE6R3ARA821MHA0G APXE6R3ARA821MHC0G APXE6R3ARA821MJ80G APXE6R3ARA122MJA0G APXE6R3ARA152MJA0G APXE6R3ARA152MJC0G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP - PXESeries ◆STANDARD RATINGS WV (Vdc) 10 16 Cap (µF) Size code Leakage current (µA max./after 2min.) 47 56 68 120 150 220 270 330 390 470 680 33 39 68 82 100 100 120 150 180 220 220 330 E61 E61 E61 F61 F80 H70 H70 H80 HA0 J80 JA0 E61 E61 F61 F80 F80 H70 H70 H80 HA0 HA0 J80 JA0 94.0 112 136 240 300 440 540 660 780 940 1,360 105 124 217 262 320 320 384 480 576 704 704 1,050 ESR Rated ripple current (mΩ max./20℃, 100k to 300kHz) (mArms/105℃, 100kHz) 28 28 28 25 21 21 21 19 17 19 13 35 35 28 24 24 24 24 22 18 18 22 16 2,310 2,310 2,310 2,530 2,880 3,220 3,220 3,390 4,000 3,800 4,820 2,070 2,070 2,390 2,700 2,700 3,010 3,010 3,150 3,890 3,890 3,450 4,350 Part No. APXE100ARA470ME61G APXE100ARA560ME61G APXE100ARA680ME61G APXE100ARA121MF61G APXE100ARA151MF80G APXE100ARA221MH70G APXE100ARA271MH70G APXE100ARA331MH80G APXE100ARA391MHA0G APXE100ARA471MJ80G APXE100ARA681MJA0G APXE160ARA330ME61G APXE160ARA390ME61G APXE160ARA680MF61G APXE160ARA820MF80G APXE160ARA101MF80G APXE160ARA101MH70G APXE160ARA121MH70G APXE160ARA151MH80G APXE160ARA181MHA0G APXE160ARA221MHA0G APXE160ARA221MJ80G APXE160ARA331MJA0G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency（Hz） SMD type 120 0.05 1k 0.30 10k 0.55 50k 0.70 100k to 500k 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXA - Series PXE ・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte ・Rated voltage range : 2.5 to 25Vdc, case size range : φ5×5.7L toφ10×12.2L ・Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc. ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・Halogen Free Lower ESR PXA ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105℃ 2.5 to 25Vdc ±20% (M) Shall not exceed values shown in STANDARD RATINGS. *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance (at 20℃, 120Hz) (at 20℃ after 2 minutes) 0.12 max. (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours (F45 : 3,000 hours) at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours(F45 : 500 hours). Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 2.5 4.0 6.3 10 16 20 23 25 Surge voltage (Vdc) 2.9 4.6 7.2 12 18 23 23 29 Bias Humidity Surge Voltage Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the solder temperature is reduced back to 20°C to measure dip resistance after soldering has been performed under the recommended soldering conditions. Appearance No significant damage Capacitance value Within the specified tolerance range D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value (Voltage treatment) 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) Soldering Heat Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] ◆MARKING 0.3max. A±0.2 L±0.3 (Note) Note : L+0.1/-0.2 for F45 L±0.5 for HC0 and JC0 P C±0.2 W B±0.2 φD±0.5 ●Terminal Code : A Size code E60 F45 F60 H70 HC0 J80 JC0 φD 5 6.3 6.3 8 8 10 10 L A B C 5.7 5.3 5.3 5.9 4.4 6.6 6.6 7.2 5.7 6.6 6.6 7.2 6.7 8.3 8.3 9.0 12.0 8.3 8.3 9.0 7.7 10.3 10.3 11.0 12.2 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 P 1.4 1.9 1.9 3.1 3.1 4.5 4.5 EX) 16V39µF A15L 39 16V Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP - Surface Mount PXASeries ◆PART NUMBERING SYSTEM 1 2 3 4 A PXA 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 10µF:100,100µF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS WV Cap (Vdc) (µF) Leakage Rated ripple ESR current current Size (µA max./ (mΩ max./ 20℃, (mArms/105℃, code after 100k to 300kHz) 100kHz) 2 min.) 220 560 2.5 680 1,000 1,500 100 120 150 150 220 4 330 470 560 680 820 1,200 47 68 82 82 100 100 100 120 6.3 150 220 330 390 470 470 680 820 F60 H70 HC0 J80 JC0 F60 F45 E60 F60 H70 H70 J80 HC0 J80 JC0 JC0 E60 F60 F45 F60 E60 F45 F60 F60 H70 H70 J80 HC0 HC0 J80 JC0 JC0 110 280 340 500 750 80.0 240 120 120 176 264 376 448 544 656 960 59.2 85.6 258 103 126 315 126 151 189 277 415 491 592 592 856 1,030 25 23 12 19 10 26 38 30 26 25 25 20 12 20 10 10 35 27 40 27 35 40 27 27 25 25 20 12 12 20 10 10 2,500 3,100 4,770 4,240 5,500 2,450 1,710 1,490 2,450 3,020 3,020 4,130 4,770 4,130 5,500 5,500 1,380 2,400 1,670 2,400 1,380 1,670 2,400 2,400 3,020 3,020 4,130 4,770 4,770 4,130 5,500 5,500 Part No. APXA2R5ARA221MF60G APXA2R5ARA561MH70G APXA2R5ARA681MHC0G APXA2R5ARA102MJ80G APXA2R5ARA152MJC0G APXA4R0ARA101MF60G APXA4R0ARA121MF45G APXA4R0ARA151ME60G APXA4R0ARA151MF60G APXA4R0ARA221MH70G APXA4R0ARA331MH70G APXA4R0ARA471MJ80G APXA4R0ARA561MHC0G APXA4R0ARA681MJ80G APXA4R0ARA821MJC0G APXA4R0ARA122MJC0G APXA6R3ARA470ME60G APXA6R3ARA680MF60G APXA6R3ARA820MF45G APXA6R3ARA820MF60G APXA6R3ARA101ME60G APXA6R3ARA101MF45G APXA6R3ARA101MF60G APXA6R3ARA121MF60G APXA6R3ARA151MH70G APXA6R3ARA221MH70G APXA6R3ARA331MJ80G APXA6R3ARA391MHC0G APXA6R3ARA471MHC0G APXA6R3ARA471MJ80G APXA6R3ARA681MJC0G APXA6R3ARA821MJC0G WV Cap (Vdc) (µF) 10 16 20 23 25 33 47 47 47 56 120 150 270 270 330 330 470 560 22 22 33 39 82 150 180 180 220 330 15 22 39 47 82 150 15 10 22 39 Leakage Rated ripple ESR current current Size (µA max./ (mΩ max./ 20℃, (mArms/105℃, code after 100k to 300kHz) 100kHz) 2 min.) E60 E60 F45 F60 F60 H70 H70 HC0 J80 HC0 J80 JC0 JC0 E60 F45 F60 F60 H70 J80 HC0 J80 JC0 JC0 F45 F60 H70 H70 J80 JC0 F45 F60 H70 J80 66.0 94.0 235 94.0 112 240 300 540 540 660 660 940 1,120 70.4 176 105 124 262 480 576 576 704 1,050 150 88.0 156 188 328 600 172 125 275 487 40 40 41 31 31 27 27 14 24 14 24 12 12 45 45 37 37 30 26 16 26 14 14 57 50 45 45 40 20 57 65 50 45 1,270 1,270 1,560 2,250 2,250 2,800 2,800 4,420 3,770 4,420 3,770 5,300 5,300 1,210 1,490 2,050 2,050 2,700 3,430 4,360 3,430 5,050 5,050 1,300 1,650 2,000 2,000 2,500 4,320 1,300 1,500 1,800 2,100 Part No. APXA100ARA330ME60G APXA100ARA470ME60G APXA100ARA470MF45G APXA100ARA470MF60G APXA100ARA560MF60G APXA100ARA121MH70G APXA100ARA151MH70G APXA100ARA271MHC0G APXA100ARA271MJ80G APXA100ARA331MHC0G APXA100ARA331MJ80G APXA100ARA471MJC0G APXA100ARA561MJC0G APXA160ARA220ME60G APXA160ARA220MF45G APXA160ARA330MF60G APXA160ARA390MF60G APXA160ARA820MH70G APXA160ARA151MJ80G APXA160ARA181MHC0G APXA160ARA181MJ80G APXA160ARA221MJC0G APXA160ARA331MJC0G APXA200ARA150MF45G APXA200ARA220MF60G APXA200ARA390MH70G APXA200ARA470MH70G APXA200ARA820MJ80G APXA200ARA151MJC0G APXA230ARA150MF45G APXA250ARA100MF60G APXA250ARA220MH70G APXA250ARA390MJ80G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency（Hz） SMD type 120 0.05 1k 0.30 10k 0.55 50k 0.70 100k to 500k 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXD - Series ・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. ・For automobile modules and other high temperature applications ・Endurance : 125℃ 2,000 hours ・Rated voltage range : 2.5 to 10Vdc, Capacitance range : 47 to 470µF ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・Halogen Free ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. PXD Longer life PXH ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +125℃ 2.5 to 10Vdc ±20% (M) Shall not exceed values shown in STANDARD RATINGS. *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance (at 20℃, 120Hz) (at 20℃ after 2 minutes) 0.12 max. (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours at 125℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value ESR ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 125℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 2.5 6.3 10 Surge voltage (Vdc) 2.9 7.2 12 Bias Humidity Surge Voltage Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the solder temperature is reduced back to 20°C to measure dip resistance after soldering has been performed under the recommended soldering conditions. Appearance No significant damage Capacitance value Within the specified tolerance range D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value (Voltage treatment) 0.5% per 1,000 hours maximum (Confidence level 60% at 125℃) Soldering Heat Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 125℃. ◆DIMENSIONS [mm] EX) 10V330µF P C±0.2 W B±0.2 φD±0.5 ● Terminal Code : A 0.3max. ◆MARKING A±0.2 Size code E61 F61 H70 J80 φD 5 6.3 8 10 L 5.8 5.8 6.7 7.7 A B C 5.3 5.3 5.9 6.6 6.6 7.2 8.3 8.3 9.0 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.4 1.9 3.1 4.5 D22A 330 10V L±0.3 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP - Surface Mount PXDSeries ◆PART NUMBERING SYSTEM 1 2 3 4 A PXD 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS WV (Vdc) 2.5 6.3 10 *1 Cap (µF) Size code 120 220 56 100 220 470 47 56 150 330 E61 F61 E61 F61 H70 J80 E61 F61 H70 J80 Leakage current ESR (µA max./after 2min.) (mΩ max./20℃, 100k to 300kHz) 60.0 110 70.5 126 277 592 94.0 112 300 660 40 30 45 35 30 25 50 40 35 25 Rated ripple current (mArms/100kHz) -55℃≦Tx≦+105℃*1 +105℃＜Tx≦+125℃*1 1,450 2,500 1,380 2,400 3,020 3,500 1,270 2,250 2,800 3,500 650 770 600 720 960 1,100 550 680 880 1,100 Part No. APXD2R5ARA121ME61G APXD2R5ARA221MF61G APXD6R3ARA560ME61G APXD6R3ARA101MF61G APXD6R3ARA221MH70G APXD6R3ARA471MJ80G APXD100ARA470ME61G APXD100ARA560MF61G APXD100ARA151MH70G APXD100ARA331MJ80G Tx : Ambient temperature（℃） ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency（Hz） SMD type 120 0.05 1k 0.30 10k 0.55 50k 0.70 100k to 500k 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXH - Series ・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. ・Suitable for DC-DC converters, voltage regulators and decoupling applications. ・Endurance : 125℃ 1,000 hours ・Rated voltage range : 2.5 to 20Vdc, Capacitance range : 22 to 1,000µF ・Case size range :φ6.3×5.7L to φ10×7.7L ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・Halogen Free PXH Higher temperature PXA ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +125℃ 2.5 to 20Vdc ±20% (M) Shall not exceed values shown in STANDARD RATINGS. *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance (at 20℃, 120Hz) (at 20℃ after 2 minutes) 0.12 max. (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 1,000 hours at 125℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value ESR ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 125℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 2.5 4.0 6.3 10 16 20 Surge voltage (Vdc) 2.9 4.6 7.2 12 18 23 Bias Humidity Surge Voltage Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the solder temperature is reduced back to 20°C to measure dip resistance after soldering has been performed under the recommended soldering conditions. Appearance No significant damage Capacitance value Within the specified tolerance range D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value (Voltage treatment) 0.5% per 1,000 hours maximum (Confidence level 60% at 125℃) Soldering Heat Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 125℃. ◆DIMENSIONS [mm] EX) 20V22µF P C±0.2 W B±0.2 φD±0.5 ● Terminal Code : A 0.3max. ◆MARKING Size code F60 H70 J80 φD 6.3 8 10 L 5.7 6.7 7.7 A B C 6.6 6.6 7.2 8.3 8.3 9.0 10.3 10.3 11.0 W 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.9 3.1 4.5 H39F 22 20V A±0.2 L±0.3 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP - Surface Mount PXHSeries ◆PART NUMBERING SYSTEM 1 2 3 4 A PXH 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 22µF:220,100µF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS WV (Vdc) 2.5 4 6.3 10 16 20 *1 Cap (µF) Size code 220 560 1,000 150 220 680 82 100 150 220 470 56 120 150 330 39 82 150 180 22 47 82 F60 H70 J80 F60 H70 J80 F60 F60 H70 H70 J80 F60 H70 H70 J80 F60 H70 J80 J80 F60 H70 J80 Leakage current ESR (µA max./after 2min.) (mΩ max./20℃, 100k to 300kHz) 110 280 500 120 176 544 103 126 189 277 592 112 240 300 660 125 262 480 576 88.0 188 328 35 30 25 35 30 25 40 40 30 30 25 45 35 35 30 50 40 35 35 60 45 45 Rated ripple current (mArms/100kHz) -55℃≦Tx≦+105℃*1 +105℃＜Tx≦+125℃*1 2,500 3,100 3,700 2,450 3,020 3,700 2,400 2,400 3,020 3,020 3,700 2,250 2,800 2,800 3,700 2,050 2,700 3,020 3,020 1,650 2,000 2,400 770 960 1,100 770 960 1,100 720 720 960 960 1,100 680 880 880 1,010 650 830 930 930 590 780 820 Part No. APXH2R5ARA221MF60G APXH2R5ARA561MH70G APXH2R5ARA102MJ80G APXH4R0ARA151MF60G APXH4R0ARA221MH70G APXH4R0ARA681MJ80G APXH6R3ARA820MF60G APXH6R3ARA101MF60G APXH6R3ARA151MH70G APXH6R3ARA221MH70G APXH6R3ARA471MJ80G APXH100ARA560MF60G APXH100ARA121MH70G APXH100ARA151MH70G APXH100ARA331MJ80G APXH160ARA390MF60G APXH160ARA820MH70G APXH160ARA151MJ80G APXH160ARA181MJ80G APXH200ARA220MF60G APXH200ARA470MH70G APXH200ARA820MJ80G Tx : Ambient temperature（℃） ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency（Hz） 2.5 to 6.3Vdc 10 to 20Vdc 120 0.05 0.05 1k 0.30 0.25 10k 0.55 0.55 50k 0.70 0.55 100k to 500k 1.00 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP PSW - Radial Lead New! Series ・Super low ESR, high ripple current capability ・Endurance: 5,000 hours at 105℃ ・Rated voltage : 25Vdc, Capacitance range : 180 to 820µF ・RoHS2 Compliant ・Halogen Free PSW Downsized PSG ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Capacitance Tolerance Leakage Current -55 to +105℃ 25Vdc ±20% (M) I=0.2CV Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max.Impedance Ratio) Endurance Bias Humidity Test Surge Voltage Test 0.12 max. (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to DC voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 25 29 Surge voltage (Vdc) Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] ●Terminal Code : E F08,H08 φD' φd F±0.5 Coated Case L' 15min. 4min. F±0.5 φd φD' L' 15min. F08 6.3 H08 HB5 JB5 8.0 10.0 0.6 2.5 3.5 5.0 φD+0.5max. L+1.0max. L+1.5max. ◆MARKING HB5,JB5 Coated Case Size code φD φd F φD' L' EX) 25V180µF W 02B 180 25V 4min. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP - Radial Lead PSWSeries New! ◆PART NUMBERING SYSTEM 1 2 3 4 A P SW 5 6 7 8 E 9 10 11 12 13 14 M 15 16 17 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 180µF:181,820µF:821) Lead forming·Taping code Terminal code Voltage code (ex. 25V:250) Series code Category Please refer to “Product code guide (conductive polymer type)” ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L (mm) ESR (mΩ max./20℃, 100k to 300kHz) Rated ripple current (mArms/105℃, 100kHz) Part No. 25 180 330 470 820 6.3×8 8×8 8 × 11.5 10× 11.5 28 18 16 14 2,780 3,770 4,650 5,000 APSW250E□□181MF08S APSW250E□□331MH08S APSW250E□□471MHB5S APSW250E□□821MJB5S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency（Hz） Radial lead type 120 0.10 1k 0.35 10k 0.60 50k 0.80 100k to 500k 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP PSJ - Series Radial Lead PSJ ・Super low ESR, high ripple current capability ・ESR 4mΩ max. lineup ・Endurance : 2,000 to 5,000 hours at 105℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・Halogen Free Lower ESR PSF ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max.Impedance Ratio) Endurance Bias Humidity Test Surge Voltage Test -55 to +105℃ 2.5Vdc ±20% (M) (at 20℃, 120Hz) 500μA max. (at 20℃ after 2 minutes) 0.10 max. (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 hours(φ5.4×8L : 2,000 hours) at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to DC voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 2.5 Surge voltage (Vdc) 2.9 Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] ● Terminal Code : E φD' φd F±0.5 Coated Case L' 15min. Size code φD φd F φD' L' E08 F08 5.4 6.3 0.6 0.6 2.0 2.5 φD+0.5max. L+1.5max. ◆MARKING EX) 2.5V560µF J 6D6 560 2.5V 4min. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP - Radial Lead PSJSeries ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PSJ 2 R 5 E AA 5 6 1 M F 0 8 8 Supplement code (Note1) Size code Capacitance tolerance code Capacitance code (ex. 390µF:391, 560µF:561) Lead forming·Taping code Terminal code Voltage code (ex. 2.5V:2R5) Series code Category (Note1) : PSJ series, 2.5V560μF (ESR 4mΩ max.) has supplement code “J”. Terminal and terminal plating are the same as all other in PSJ series. Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) 2.5 390 470 560 560 5.4×8 5.4× 8 6.3× 8 6.3× 8 ESR (mΩ max./20℃, 300kHz) 4 4.5 4 4.5 Rated ripple current (mArms/105℃, 100kHz) Part No. 5,600 5,200 6,500 6,200 APSJ2R5E□□391ME08S APSJ2R5E□□471ME08S APSJ2R5E□□561MF08J APSJ2R5E□□561MF08S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency（Hz） Radial lead type 120 0.10 1k 0.35 10k 0.60 50k 0.80 100k to 500k 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP PSG - Radial Lead Upgrade! Series ・Super low ESR, high ripple current capability ・Endurance: 15,000 to 20,000 hours at 105℃ ・Rated voltage : 16 to 35Vdc ・RoHS2 Compliant ・Halogen Free PSG Downsized PSF ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Capacitance Tolerance Leakage Current -55 to +105℃ 16 to 35Vdc ±20% (M) I=0.2CV or 500μA, whichever is greater Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max.Impedance Ratio) Endurance Bias Humidity Test Surge Voltage Test (at 20℃, 120Hz) (at 20℃ after 2 minutes) 0.12 max. (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 20,000 hours (20 to 35V : 15,000 hours) at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to DC voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 16 20 25 35 18 23 29 40 Surge voltage (Vdc) Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] ●Terminal Code : E F05,F08,H08 φD' φd F±0.5 Coated Case Size code φD φd F φD' L' F05 F08 H08 HB5 H16 H20 6.3 8.0 2.5 0.6 3.5 φD+0.5max. 0.45 L+1.0max. (Note1) JB5 J16 10.0 J20 5.0 L+1.5max. Note1 : L+1.2 max. for 16V270μF (Rated ripple current 5,080mArms). L' 15min. 4min. ◆MARKING HB5,H16,H20,JB5,J16,J20 φD' φd F±0.5 Coated Case L' 15min. EX) 16V150µF G 6D6 150 16V 4min. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP - Radial Lead PSGSeries Upgrade! ◆PART NUMBERING SYSTEM 1 2 3 4 A PSG 5 6 7 8 E 9 10 11 12 13 14 M 15 16 17 18 Supplement code (Note2) Size code Capacitance tolerance code Capacitance code (ex. 150µF:151,1,000µF:102) Lead forming·Taping code Terminal code Voltage code (ex. 16V:160,20V:200) Series code Category (Note2) : PSG series, 16V270μF (Rated ripple current 5,080mArms) ,16V470μF (Rated ripple current 5,400mArms) ,16V560μF (Rated ripple current 6,100mArms)have supplement code “J”. Terminal and terminal plating are the same as all other in PSG series. Please refer to “Product code guide (conductive polymer type)” ◆STANDARD RATINGS WV (Vdc) 16 20 25 35 Cap (µF) Case size φD×L (mm) ESR (mΩ max./20℃, 100k to 300kHz) Rated ripple current (mArms/105℃, 100kHz) Part No. 150 270 270 470 470 560 560 820 820 1,000 1,000 1,000 1,200 1,500 1,500 1,800 1,800 2,200 2,700 120 180 330 390 680 56 82 100 120 150 180 180 220 220 270 270 330 330 390 390 470 560 680 68 120 6.3×5 6.3 ×8 6.3×8 8×8 8×8 8×11.5 8×11.5 8×16 10×11.5 8 ×16 8 ×20 10× 11.5 8 ×20 8 ×20 10× 16 10× 16 10× 20 10× 20 10× 20 6.3 ×5 6.3× 8 8× 8 8 × 11.5 10× 11.5 6.3 ×5 6.3× 8 6.3×8 6.3×8 6.3×8 8× 8 8× 11.5 8×8 8 × 11.5 8 ×8 8 ×11.5 8×11.5 10×11.5 8×11.5 10×11.5 10× 11.5 10× 11.5 10× 11.5 8×11.5 10× 11.5 20 10 15 8 16 8 14 8 12 8 8 12 8 8 8 8 8 8 8 20 18 17 14 12 30 28 28 28 28 18 16 18 16 18 16 16 14 16 14 14 14 14 18 16 3,200 5,080 3,800 5,400 4,000 6,100 4,970 7,000 5,400 7,000 7,500 5,400 7,500 7,500 7,700 7,700 8,100 8,100 8,100 3,200 3,460 3,880 4,970 5,400 2,600 2,780 2,780 2,780 2,780 3,770 4,650 3,770 4,650 3,770 4,650 4,650 5,000 4,650 5,000 5,000 5,000 5,000 4,380 4,670 APSG160E□□151MF05S APSG160E□□271MF08J APSG160E□□271MF08S APSG160E□□471MH08J APSG160E□□471MH08S APSG160E□□561MHB5J APSG160E□□561MHB5S APSG160E□□821MH16S APSG160E□□821MJB5S APSG160E□□102MH16S APSG160E□□102MH20S APSG160E□□102MJB5S APSG160E□□122MH20S APSG160E□□152MH20S APSG160E□□152MJ16S APSG160E□□182MJ16S APSG160E□□182MJ20S APSG160E□□222MJ20S APSG160E□□272MJ20S APSG200E□□121MF05S APSG200E□□181MF08S APSG200E□□331MH08S APSG200E□□391MHB5S APSG200E□□681MJB5S APSG250E□□560MF05S APSG250E□□820MF08S APSG250E□□101MF08S APSG250E□□121MF08S APSG250E□□151MF08S APSG250E□□181MH08S APSG250E□□181MHB5S APSG250E□□221MH08S APSG250E□□221MHB5S APSG250E□□271MH08S APSG250E□□271MHB5S APSG250E□□331MHB5S APSG250E□□331MJB5S APSG250E□□391MHB5S APSG250E□□391MJB5S APSG250E□□471MJB5S APSG250E□□561MJB5S APSG250E□□681MJB5S APSG350E□□680MHB5S APSG350E□□121MJB5S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency（Hz） Radial lead type 120 0.10 1k 0.35 10k 0.60 50k 0.80 100k to 500k 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Radial Lead PSK - Series PSK ・Super low ESR, high ripple current capability ・Downsized from PSE series (φ6.3×8L to φ5×8L) ・Long life (20,000 hours at 105℃) ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・Halogen Free Downsized PSE ◆SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current*Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max.Impedance Ratio) Endurance Bias Humidity Test Surge Voltage Test Failure Rate Characteristics -55 to +105℃ 2.5 to 6.3 Vdc ±20% (M) 500μA max. (at 20℃, 120Hz) (at 20℃ after 2 minutes) 0.10 max. (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 20,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to DC voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 2.5 4.0 6.3 Surge voltage (Vdc) 2.9 4.6 7.2 Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] F±0.5 ● Terminal Code : E φD' φd Coated Case L' 15min. 4min. Size code E08 φD 5.0 φd 0.5 (Note2) F 2.0 φD' φD+0.5max. L' L+1.0max. Note2 : 0.45 for rated vollage 2.5V ◆MARKING EX) 2.5V560µF K6D6 560 2.5V Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP - Radial Lead PSKSeries ◆PART NUMBERING SYSTEM 1 2 3 4 A PSK 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E AA 5 6 1 M E 0 8 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 560µF:561) Lead forming.Taping code Terminal code Voltage code (ex. 2.5V:2R5, 6.3V:6R3) Series code Category Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS WV (Vdc) 2.5 4 6.3 Cap (µF) Case size φD×L (mm) ESR (mΩ max./20℃, 100k to 300kHz) Rated ripple current (mArms/105℃, 100kHz) Part No. 220 330 470 560 330 270 330 5 ×8 5× 8 5× 8 5× 8 5×8 5 ×8 5×8 7 7 7 7 8 10 8 4,350 4,350 4,350 4,350 4,050 3,700 4,050 APSK2R5E□□221ME08S APSK2R5E□□331ME08S APSK2R5E□□471ME08S APSK2R5E□□561ME08S APSK4R0E□□331ME08S APSK6R3E□□271ME08S APSK6R3E□□331ME08S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency（Hz） Radial lead type 120 0.10 1k 0.35 10k 0.60 50k 0.80 100k to 500k 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Radial Lead PSF - Series PSF ・Super low ESR, high ripple current capability ・ESR 5mΩmax. (2 to 4Vdc) ・Longer life (20,000 hours at 105℃) ・Rated voltage range : 2 to 16Vdc ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・Halogen Free Lower ESR PSE ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current *Note -55 to +105℃ 2 to 16Vdc ±20%(M) Shall not exceed values shown in STANDARD RATINGS. (at 20℃, 120Hz) (at 20℃ after 2 minutes) Dissipation Factor (tanδ) Low Temperature Characteristics (Max.Impedance Ratio) Endurance 0.10 max. (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 20,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to DC voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR 2 to 6.3Vdc : ≦The initial specified value 16Vdc : ≦150% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 2.0 2.5 4.0 6.3 16 Surge voltage (Vdc) 2.3 2.9 4.6 7.2 18 Bias Humidity Test Surge Voltage Test Appearance Capacitance change D.F. (tanδ) ESR No significant damage ≦±20% of the initial value ≦The initial specified value 2 to 6.3Vdc : ≦The initial specified value : ≦150% of the initial specified value 16Vdc Leakage current ≦The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] ● Terminal Code : E F±0.5 Coated Case φD' φd F05, F08, H08 L' 15min. 4min. F±0.5 Coated Case φD' φd HB5, JB5 Size code F05 F08 H08 HB5 JB5 φD 6.3 8.0 10.0 φd 0.45 0.6 F 2.5 3.5 5.0 Note1 : L+1.2 max. for 6.3V820μF φD' φD+0.5max. L' L+1.0max. (Note1) L+1.5max. ◆MARKING EX) 2.5V560µF F 6D6 560 2.5V L' 15min. 4min. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP - Radial Lead PSFSeries ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PS F 2 R 5 E AA 5 6 1 M F 0 8 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 560µF:561) Lead forming·Taping code Terminal code Voltage code (ex. 2.5V:2R5, 16V:160) Series code Category Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) Leakage current (µA max./after 2min.) ESR (mΩ max./20℃, 100k to 300kHz) Rated ripple current (mArms/105℃, 100kHz) 2 1,000 330 470 560 820 1,200 1,600 470 560 820 100 270 270 330 470 470 6.3×8 6.3×8 6.3×8 6.3×8 6.3×8 6.3×8 8×8 6.3×8 6.3×8 6.3×8 6.3× 5 8× 8 8× 11.5 8× 8 8× 11.5 10× 11.5 500 500 500 500 500 1,200 800 500 500 1,030 500 864 864 1,050 1,500 1,500 5 5 5 5 5 5 5 5 5 8 24 10 11 13 11 10 5,900 5,900 5,900 5,900 5,900 5,900 6,100 5,900 5,900 4,700 2,490 5,000 5,080 4,700 5,400 6,100 2.5 4 6.3 16 Part No. APSF2R0E□□102MF08S APSF2R5E□□331MF08S APSF2R5E□□471MF08S APSF2R5E□□561MF08S APSF2R5E□□821MF08S APSF2R5E□□122MF08S APSF2R5E□□162MH08S APSF4R0E□□471MF08S APSF4R0E□□561MF08S APSF6R3E□□821MF08S APSF160E□□101MF05S APSF160E□□271MH08S APSF160E□□271MHB5S APSF160E□□331MH08S APSF160E□□471MHB5S APSF160E□□471MJB5S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency（Hz） Radial lead type 120 0.10 1k 0.35 10k 0.60 50k 0.80 100k to 500k 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP PSE - Series Radial Lead PSE ・Super low ESR, high ripple current capability ・Endurance : 20,000 hours at 105℃ ・Rated voltage range : 2.5 to 6.3Vdc ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・Halogen Free Longer life Downsized PSC ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max.Impedance Ratio) Endurance Bias Humidity Test Surge Voltage Test -55 to +105℃ 2.5 to 6.3Vdc ±20% (M) I=0.2CV or 500μA, whichever is greater Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) 0.10 max. (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 20,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to DC voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 2.5 4.0 6.3 2.9 4.6 7.2 Surge voltage (Vdc) Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] ● Terminal Code : E φD' φd F±0.5 Coated Case L' 15min. Size code φD φd F φD' L' F08 6.3 0.6 2.5 φD+0.5max. L+1.5max. ◆MARKING EX) 2.5V820µF E 6D6 820 2.5V 4min. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP - Radial Lead PSESeries ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PSE 2 R 5 E AA 5 6 1 M F 0 8 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 820µF:821) Lead forming·Taping code Terminal code Voltage code (ex. 2.5V:2R5, 4V:4R0, 6.3V:6R3) Series code Category Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) ESR (mΩ max./20℃, 100k to 300kHz) Rated ripple current (mArms/105℃, 100kHz) Part No. 2.5 4 820 560 470 560 6.3 ×8 6.3×8 6.3 ×8 6.3× 8 7 7 8 8 5,000 5,000 4,700 4,700 APSE2R5E□□821MF08S APSE4R0E□□561MF08S APSE6R3E□□471MF08S APSE6R3E□□561MF08S 6.3 □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency（Hz） Radial lead type 120 0.10 1k 0.35 10k 0.60 50k 0.80 100k to 500k 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Radial Lead PSC - Series ・Super low ESR, high ripple current capability ・Rated voltage range : 2.5 to 16Vdc ・Nominal capacitance range : 270 to 2,700µF ・Endurance : 15,000 hours at 105℃ ・Suitable for DC-DC converters, voltage regulators and decoupling applications for computer motherboards ・Added 2.5V 820µF (ESR 5mΩ max.) ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・Halogen Free PSE Longer life Downsizing PSC ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current *Note Dissipation Factor (tanδ) Low Temperature Characteristics (Max.Impedance Ratio) Endurance Bias Humidity Test Surge Voltage Test -55 to +105℃ 2.5 to 16Vdc ±20% (M) I=0.2CV or 500μA, whichever is greater. Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (Vdc) (at 20℃, 120Hz) (at 20℃ after 2 minutes) 0.10 max. (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to DC voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 2.5 4.0 6.3 10 16 2.9 4.6 7.2 12 18 Surge voltage (Vdc) Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] ◆MARKING ●Terminal Code : E φd φD' L' 15min. EX) 2.5V820µF F±0.5 Coated Case 4min. Size code H08 φD 8.0 φd 0.6 F 3.5 φD' L' L+1.0max. HB5 JB5 8.0 10.0 0.8(Note1) 0.8(Note1) 3.5 5.0 φD+0.5max. L+1.5max. JC5 10.0 0.6 5.0 C 3D6 820 2.5V Note1 : 0.6 for rated volt 16V. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP - Radial Lead PSCSeries ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PSC AAA E AA AAA M AAA S Supplement code (Note2) Size code Capacitance tolerance code Capacitance code (ex. 330µF:331, 1000µF:102) Lead forming·Taping code Terminal code Voltage code (ex. 4V:4R0,6.3V:6R3,10V:100) Series code Category (Note2) PSC series, 2.5V820µF(ESR 5mΩ max.) has supplement code "J". Can case, terminal and terminal plating are the same as all others in PSC series. Please refer to "Product code guide (conductive polymer type)" ◆STANDARD RATINGS WV (Vdc) 2.5 4 6.3 10 16 Cap (µF) Case size φD×L(mm) ESR (mΩ max./20℃, 100k to 300kHz) Rated ripple current (mArms/105℃, 100kHz) Part No. 560 820 820 1,000 1,000 1,500 2,700 560 680 1,000 470 560 820 1,500 390 680 270 330 330 470 8 ×8 8×8 8×8 8×8 8× 11.5 8 × 11.5 10 ×11.5 8 ×8 8× 11.5 10×11.5 8 ×8 8×8 10× 11.5 10×11.5 8 × 11.5 10×11.5 8× 11.5 10× 11.5 10× 12.5 10× 11.5 7 5 7 7 7 7 8 7 7 6 8 8 7 10 9 7 11 10 10 10 6,100 6,100 6,100 6,100 6,100 6,100 5,560 6,100 6,100 6,640 5,700 5,700 6,640 5,560 5,650 6,100 5,080 6,100 6,100 6,100 APSC2R5E□□561MH08S APSC2R5E□□821MH08J APSC2R5E□□821MH08S APSC2R5E□□102MH08S APSC2R5E□□102MHB5S APSC2R5E□□152MHB5S APSC2R5E□□272MJB5S APSC4R0E□□561MH08S APSC4R0E□□681MHB5S APSC4R0E□□102MJB5S APSC6R3E□□471MH08S APSC6R3E□□561MH08S APSC6R3E□□821MJB5S APSC6R3E□□152MJB5S APSC100E□□391MHB5S APSC100E□□681MJB5S APSC160E□□271MHB5S APSC160E□□331MJB5S APSC160E□□331MJC5S APSC160E□□471MJB5S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency（Hz） Radial lead type 120 0.10 1k 0.35 10k 0.60 50k 0.80 100k to 500k 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Return Group Chart PRECAUTIONS AND GUIDELINES (Conductive Polymer Hybrid) Conductive Polymer Hybrid Aluminum Electrolytic Capacitors (Hereinafter called capacitor) that uses highly conductive polymer electrolytic materials and electrolyte. Please read the following in order to get the most out of your capacitor. The circuits described as examples in this catalog and the "delivery specifications" are featured in order to show the operations and usage of our products, however, this fact does not guarantee that the circuits are available to function in your equipment systems. We are not in any case responsible for any failures or damage caused by the use of information contained herein. You should examine our products, of which the characteristics are described in the "delivery specifications" and other documents, and determine whether or not our products suit your requirements according to the specifications of your equipment systems. Therefore, you bear final responsibility regarding the use of our products. Please make sure that you take appropriate safety measures such as use of redundant design and malfunction prevention measures in order to prevent fatal accidents and/or fires in the event any of our products malfunction. For Conductive Polymer Aluminum Solid Capacitors, see Precautions and Guidelines (Conductive Polymer). For Aluminum Electrolytic Capacitors, see Precautions and Guidelines (Aluminum Electrolytic Capacitors). 1 Device circuits design considerations 1) Confirm installation and operating requirements for the capacitors, then use them within the performance limits prescribed in this catalog or product specifications. 2) Polarity Capacitors are polarized. Never apply a reverse voltage or AC voltage. Connecting with wrong polarity will short-circuit or damage the capacitor with the pressure relief vent opening early on. To identify the polarity of a capacitor, see the relevant diagram in the catalogs or product specifications, or the polarity marking on the body of the capacitors. 3) Operating voltage Do not apply an over-voltage that exceeds a rated voltage specified for the capacitors. The total peak value of the ripple voltage plus the DC voltage must not exceed the rated voltage of the capacitors. Capacitors do not require voltage derating within the category temperature. Although capacitors specify a surge voltage that exceeds the full rated voltage, it does not assure long-term use but limited use under specific conditions. 4) Ripple current Do not apply an over current that exceeds the rated ripple current specified for the capacitors. Excessive ripple current will increase heat production within the capacitors, causing the capacitors to be damaged as follows: • Shorten lifetime • Open pressure relief vent • Short circuit At the time of low DC bias voltage, reverse voltage may be applied if uses with less than rated ripple current. Please use it as far as the reverse voltage is not applied. The rated ripple current is specified along with a specific ripple frequency. Where using the capacitors at any ripple frequency other than the specified frequency, calculate the allowable ripple current by multiplying the rated ripple current by a frequency compensation factor (Frequency Multiplier) specified for each product series. 5) Operating temperature (Category temperature) Do not apply high temperatures that exceed the upper limit of the category temperature range specified for the capacitors. Using the capacitors at temperatures higher than the upper limit will considerably shorten the lifetime of the capacitors and make the pressure relief vent open. The temperature, please confirm the temperature of the capacitors which included the ambient temperature of the device, not only the temperature in the device but also radiant heat of the heating element (power transistor, resistance) in the apparatus, self heating caused by the ripple current. Additionally, please do not place heating ele- ment on the back side of the capacitors. In addition, please use the capacitors within category temperature range because the life of the capacitors are affected by the operating temperature. In other words, lowering ambient temperatures will extend the expected lifetime of the capacitors. 6) Lifetime Select the capacitors to meet the service life requirements of device. 7) Charging and discharging Do not use capacitors in circuits intended for rapid charge and discharge cycle operations. If capacitors are used in the circuits that repeat a charge and discharge with a large voltage drop or a rapid charge and discharge at short interval cycle, capacitance will decrease and/or the capacitors will be damaged by internal heat generation. Please consult us the capacitors to use for the circuit where rapid charge and discharge is repeated. Please be careful about rush currents. Recommend to install protective circuit. 8) Leakage current The leakage current may increase due to thermal stress such as reflow soldering. After that, however, the leakage current will gradually decrease by self-healing action of the dielectric oxide layer when the capacitors are applied with a voltage less than the rated voltage within the Category Temperature range. As the voltage is closer to the rated voltage and the temperature is closer to the upper limit of Category Temperature range, the leakage current decreases faster. The leakage current will increase by the following factors, ① Soldering ② Testing of high temperature exposure with no voltage applied,high temperature/humidity storage, temperature cycles, etc. 9) Failure mode of capacitors Non-solid aluminum electrolytic capacitors have a limited lifetime which ends in an open circuit failure mode, in general. Depending on the product type and operating conditions, the failure mode may involve in opening of the pressure relief vent. But it may lead to shot circuit mode failure when capacitor is used in the overload more than the guarantee ranges including over voltage and the over current. 10) Capacitor insulation The can case of capacitor does not assure electrical insulation. The outer coating on can case is aimed for indication and does not assure function of the electrical insulation. Electrically isolate the outer can case of a capacitor from the negative terminal, the positive terminal and circuit patterns. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart PRECAUTIONS AND GUIDELINES (Conductive Polymer Hybrid) 11) Operating conditions Do not use/expose capacitors to the following conditions: ① Direct contact with water, salt water or oil, or high condensation environment. ② Direct sunlight ③ Toxic gases such as hydrogen sulfide, sulfurous acid, nitrous acid, chlorine and its compounds, bromine and its compounds and ammonium. ④ Ozone, ultraviolet rays or radiation. ⑤ Extreme vibration or mechanical shock that exceeds limits in the catalogs or product specifications. The standard vibration condition is applicable to JIS C 5101-4. 12) Mounting Capacitors contain paper separators and electric-conductive electrolyte that contains organic solvent as main solvent material, both of which are flammable. If the electrolyte leaks onto a printed circuit board, it can erode the device circuit pattern, may short-circuit the copper traces, smoke and burn. Make sure of designing a PC board as follows: ① Provide clearance space (2mm minimum) over the pressure relief vent of a capacitor to avoid blocking the correct opening of the pressure relief vent for 10mm case diameter of capacitor. ② Do not locate any wire or circuit pattern over the pressure relief vent of a capacitor. ③ Avoid locating any heat source components near capacitors or on the opposite side of the PC board under capacitors. ④ Design the solder land on the PC board in accordance with the catalog or the product specification. ⑤ For radial capacitors, design the terminal holes on the PC board to fit the terminal dimension of the capacitor. ⑥ Do not print any copper trace under the seal (terminal) side of a capacitor. When the electrolyte leaks out, it may occur circuit pattern short-circuit, and tracking or migration. Copper traces should be 1 mm (preferably 2mm or more) spaced apart from the side of the capacitor body. ⑦ In designing a double-sided PC board, do not locate any through-hole via or unnecessary hole underneath a capacitor. ⑧ In designing a double-sided PC board, do not print any circuit pattern underneath a capacitor. 13) Using capacitors for significantly safety-oriented applications Consult with us in advance of usage of our products in the following listed applications. ① Aerospace equipment ② Power generation equipment such as thermal power, nuclear power etc. ③ Medical equipment ④ Transport equipment (automobiles, trains, ships, etc.) ⑤ Transportation control equipment ⑥ Disaster prevention / crime prevention equipment ⑦ Highly publicized information processing equipment ⑧ Submarine equipment ⑨ Other applications that are not considered general-purpose applications. 14) Others Design device circuits taking into consideration the following conditions: ① Electrical characteristics of a capacitor depend on the temperature and frequency. In designing the device circuits, consider the change in the characteristics. ② If using more than one capacitor connected in parallel, design the device circuits to balance the current flow in individual capacitors. ③ If using more than one capacitor connected in series, connect shunting resistors in parallel with the individual capacitors to balance the voltage. 2 Installation 1 ) Assembling ① Do not try to reuse the capacitors once assembled and electrified ② Capacitors may have been spontaneously recharged with time by a recovery voltage phenomenon. Capacitors may produce recovery voltage higher than aluminum electrolytic capacitors and conductive polymer aluminum solid capacitors. In this case, discharge electricity through approximately 1kΩ before use. ③ If capacitors have been stored at any conditions more than 35° C and 75%RH for long storage periods of time more than the limits specified in the catalogs or product specifications, they may have high leakage current. In this case, make pre-conditioning by applying the rated voltage through a resistor of approximately 1kΩ. ④ Confirm the rated capacitance and voltage of capacitors before installation. ⑤ Confirm the polarity of capacitors before installation. ⑥ Do not try to use the capacitors that were dropped to the floor and so forth. ⑦ Do not deform the can case of a capacitor. ⑧ Verify that the lead spacing of the capacitor fits the hole spacing in the PC board before installing the capacitors. ⑨ Do not apply excessive mechanical force to capacitors more than the limits prescribed in the catalogs or product specifications. Avoid excessive mechanical force while the capacitors are in the process of vacuum-picking, placing and positioning by automatic mounting machines or cutting the lead wires by automatic insertion machines. 2) Soldering and heat resistance ① For soldering using a soldering iron, consider the following conditions: Soldering conditions (temperature and time) should be (380 C, 3 ± 0.5second). ± 10° Do not touch the body of a capacitor with the hot tip of the soldering iron. ② Verify the following when flow soldering: ・ Do not dip the body of a capacitor into the solder bath only dip the terminals in. The soldering must be done on the reverse side of PC board. ・ Soldering conditions（preheat, solder temperature and dipping time）should be within the limits prescribed in the catalog or the product specifications. ・Do not apply flux to any part of capacitors other than their terminals. ・ Make sure the capacitors do not come into contact with any other components while soldering. ③ For reflow soldering, consider the following conditions: Soldering conditions (preheat, reflow temperature and time) should be within the limits prescribed in the catalogs or product specifications. ・ When using the infrared heater and setting its temperatures, adjust the heating levels taking into consideration that the color and materials of a capacitor vary in their infrared absorbance. ・The allowable number of reflow passes is specified in the catalogs or product specifications. ・Please consult us about vapor phase soldering (VPS). ④ Do not try to reuse the capacitors once assembled. ⑤ Only use radial lead type capacitors for flow soldering. The other type capacitors are not designed for the flow soldering. ⑥ Only use chip type capacitors for reflow soldering. The other type capacitors are not designed for the reflow soldering. 3) Handling after soldering After soldering the PC board, do not apply the following mechanical stress to the capacitor: ① Do not tilt, push down or twist the body of the capacitor. ② Do not grab the body of the capacitor to carry the assembly board. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart PRECAUTIONS AND GUIDELINES (Conductive Polymer Hybrid) ③ Do not hit anything against the capacitor. When stacking the assembled boards, do not put any of the PC boards or other components against the capacitor. ④ Do not drop the assembled board. 4) Cleaning assembly boards ① Do not clean capacitors with the following cleaning agents: • Halogenated solvents: cause capacitor failures due to corrosion. • Alkali system solvents: corrode (dissolve) the aluminum can case. • Terpene and petroleum system solvents: deteriorate the rubber seal materials. • Xylene and toluene: deteriorates the rubber seal materials as well. • Acetone: erases the markings printed on a capacitor. Where cleaning is necessary, use only solvent resistant type capacitors that have been assured for the cleaning within the specific cleaning conditions prescriber in the catalogs or product specifications. In particular, carefully set up the conditions for ultrasonic cleaning system. Consult us regarding alternative CFCs or other cleaners before use. ② Where cleaning the capacitors, confirm the following conditions: • Control the contamination (the conductivity, pH, specific gravity, water content, etc.) of the cleaning agents. • After the cleaning, do not leave the capacitors (assembly boards) in an environment of cleaning agent-rich or in a closed container. Sufficiently evaporate the residual cleaning agent from the assembly boards and the capacitors by forced hot air at temperatures less than the upper limit of category temperature range for more than 10 minutes. In general, aluminum electrolytic capacitors are sensitive to contamination of halogen ions (particularly to chlorine ions). Depending on the properties of the electrolyte and rubber seal materials used in a capacitor, the halogen ions lead up to catastrophic failures on the capacitor. Where the inside of a capacitor has been contaminated with more than a certain amount of halogen ions and the capacitor is in use, the corrosion reaction of aluminum occurs. The corrosion causes the capacitor to have a significant increase in leakage current with heat produced, open the pressure relief vent and become open circuit mode failure. Due to global environmental issues (greenhouse effects and other environmental destruction by depletion of the ozone layer), the conventional cleaning solvents of CFC 113, Trichloroethylene and 1,1,1-trichloroethylene were replaced by substitutes. The following are some substitute cleaning agents and allowable cleaning conditions: a) Fatty-alcohol cleaning agents Pine Alpha ST-100S (Arakawa Chemical) Clean Through 750H, 750K, 750L and 710M (Kao) Technocare FRW-14, 15, 16 and 17 (Momentive Performance Materials) [Cleaning conditions] Either of immersion or ultrasonic cleaning, for a maximum of 10 minutes and at a maximum liquid temperature of 60°C is acceptable. Make sure that the markings on the capacitor are not rubbed against any other component or the PC board during cleaning. Note that shower cleaning affects the markings on the capacitor. b) Alternative CFCs AK225AES (Asahi Glass) [Cleaning conditions] Solvent resistant type capacitors, which were originally developed to intend to resist Freon TE or Freon TES, are also capable of withstanding any one of immersion, ultrasonic or vapor cleaning, for a maximum of 5 minutes. However, this type of cleaning agent is not recommended to use, as the cleaning materials may be banned in near future in view of global environmental issues c) IPA (Isopropyl Alcohol) Immersion cleaning with a maximum flux concentration of 2 wt% is acceptable. 5) Adhesives and coating materials ① Do not use any adhesive or coating materials containing halogenated solvents. ② Make sure of the following conditions before applying adhesive or coating materials to a capacitor, ・No flux residue nor stain is left between the rubber seal of a capacitor and PC board. ・Dry the capacitor to remove residual cleaning agents before applying adhesive and coating materials. Do not cover up the entire surface of the rubber seal of the capacitor with adhesives or coating materials. ・Consult us Heating and curing conditions for adhesives and coating materials. ・Covering up the entire surface of the rubber seal with resin mold materials will obstruct the normal diffusion of internal hydrogen gas from a capacitor and result in serious failures. Also, where the adhesive and coating materials contain a large amount of halogen ions, the halogen ions will contaminate the inside of the capacitor through the rubber seal materials, causing the capacitor to become a failure. ・ Depending on solvent materials that the adhesive or coating materials contains, note that the surface of a capacitor may change in appearance. 6) Fumigation In exporting or importing electronic devices, they may be exposed to fumigation with halide such as methyl bromide. Where the capacitors are exposed to halide such as methyl bromide, the capacitors will be damaged with the corrosion reaction with halogen ions in the same way as cleaning agents. For the export and import, Nippon Chemi-Con considers using some packaging method and so forth so that fumigation is not required. For customers to export or import electronic devices, semi-assembly products or capacitor components, confirm if they will be exposed to fumigation and also consider final condition of packaging. (Note that either cardboard or vinyl package has a risk of fumigation gas penetration.) 3 Precautions during operation of devices (1) Never touch the terminals of a capacitor directly with bare hands. (2) Do not short-circuit between the capacitor terminals with anything conductive. Also, do not spill any conductive liquid such as acid or alkaline solution over a capacitor. (3) Confirm environmental conditions where the device will be placed. Do not use the devise in the following environmental conditions: ① Water or oil spatters, or high condensation environment. ② Direct sunlight. ③ Ozone, ultraviolet rays or radiation. ④ Toxic gases such as hydrogen sulfide, sulfuric acid, nitrous acid, chlorine and its compounds, bromine and itscompounds and ammonium. ⑤ Severe vibration or mechanical shock conditions beyond the limits prescribed in the catalog or product specification. The standard vibration condition is applicable to JIS C 5101-4. 4 Maintenance inspections (1) For industrial use capacitors, make periodic inspections of the capacitors. Before the inspections, turn off the power supply of the device and discharge the electricity of the capacitors. Where checking it by a volt-ohm meter, confirm Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart PRECAUTIONS AND GUIDELINES (Conductive Polymer Hybrid) the polarity beforehand. Do not apply mechanical stress to the terminals of the capacitors during inspection. (2) Characteristics to be inspected ① Significant damage in appearance: vent opening, electrolyte leakage, etc. ② Electrical characteristics: Leakage current, capacitance, tanδ and other characteristics prescribed in the catalogs or product specifications. If finding anything abnormal on the characteristics above, check the specifications of the capacitor and take appropriate actions such as replacement. 5 Contingencies 1) A capacitor with more than a certain case size has the pres- sure relief vent functioning to escape abnormal gas pressure increase. If gas expels from a venting capacitor, disconnect the power supply of the device or unplug the power supply cord. If not disconnecting the power supply, the device circuit may be damaged due to the short circuit failure of the capacitor or short-circuited with the liquid that the gas was condensed to. It may cause secondary damages such as device burnout in the worst case scenario. The gas that comes out of the open vent is vaporized electrolyte not smoke. C. 2) The gas expelled from a venting capacitor is more than 100° Never expose your face to the capacitor. If your eyes are exposed to the gas or you inhale it, immediately flush your eyes and/or gargle with water. If the electrolyte comes in contact with the skin, wash with soap and water. 6 Storage 1) Do not store capacitors at high temperature or high humidity. Store the capacitors indoors at temperatures of 5 to 35°C and humidifies of less than 75%RH. In principle, aluminum electrolytic capacitors should be used within 2 years after production. 2) Keep capacitors packed in the original packaging material wherever possible. 3) Avoid the following storage environmental conditions: ① Water spattering, high temperatures, high humidity or condensation environment. ② Oil spattering or oil mist filled. ③ Salt water spattering or salt filled. ④ Acidic toxic gases such as hydrogen sulfide, sulfuric acid, nitrous acid, chlorine, bromine and methyl bromide filled. ⑤ Alkaline toxic gases such as ammonium filled. ⑥ Acid or alkaline solutions spattering. ⑦ Direct sunlight, ozone, ultraviolet rays or radiation. ⑧ Extreme vibration or shock loading. 4) JEDEC J-STD-020 is not applicable. 7 components in Automotive applications. It specifies the test type, parameters and quantity, etc. for each component. The criteria of the reliability tests such as for our main products, “Aluminum Electrolytic Capacitors”are described in this standard. Pursuant to the customer's specific testing requirements, Chemi-Con submits the test results according to AEC-Q200 for Aluminum Electrolytic Capacitors used in automotive applications on request. An electronic component manufacturer cannot simply claim that their product is“AEC-Q200 Qualified” . It can be claimed “Compliant”,“Capable”,“Available”, etc., however each component must be tested per each users“Qualification Test Plan” in order to claim AEC-Q200 status. Please contact us for more information. 9 Response to the Substances of Concern 1 ) Nippon Chemi-Con aims for developing products that meet laws and regulations concerning substances of concern. （Some products may contain regulated substances for exempted application） Please contact us for more information about law-compliance status. 2 ) According to the content of REACH handbook (Guidance on requirements for substances in articles which is published on May 2008), our electronic components are“articles without any intended release”. Therefore they are not applicable for“Registration”for EU REACH Regulation Article 7 (1). Reference: Electrolytic Condenser Investigation Society Study of REACH Regulation in EU about Electrolytic Capacitor (publicized on 13 March 2008) 10 Catalogs Specifications in the catalogs are subject to change without notice. Test data shown in the catalogs are not assured as the whole performance values, but typical values. For more details, refer to JEITA RCR-2367D (March 2019) with the title of “Safety Application Guide for fixed aluminum electrolytic capacitors for use in electronic equipment”. Capacitor disposal Please consult with a local organization for the proper disposal of industrial waste. For incinerating capacitors, apply a high temperature incineration (over 800°C). Incinerating them at temperatures lower than that may produce toxic gases such as chlorine. To prevent capacitors from explosion, punch holes in or sufficiently crush the can cases of the capacitors, then incinerate. 8 About AEC-Q200 The Automotive Electronics Council（AEC）was originally established by major American automotive related manufactures. Today, the committees are composed of representatives from the sustaining Members of manufacturing companies in automotive electrical components. It has standardized the criteria for“stress test qualification”and“reliability tests”for electronic components. AEC-Q200 is the reliability test standard for approval of passive Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.2 Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS RECOMMENDED SOLDERING CONDITIONS ◆SURFACE MOUNT TYPE The following conditions are recommended for air or infrared reflow soldering HXE/HXC/HXD/HXA/HXB series onto a glass epoxy circuit board of 90×50×0.8mm (with resist) by cream solder. The temperatures shown are the surface temperature values on the top of the can and temperature of capacitor terminal. Reflow should be performed twice or less. Please ensure that the capacitor became cold enough to the room temperature (5 to 35℃) before the second reflow. Temperature on the top of capacitor (℃) and Temperature of capacitor terminal (℃) ● Recommended soldering heat conditions Peak temp. Peak 230 Size Code Max. period of time over 230℃ 217 Max. period of time over 217℃ Preheat Preheat E61, F61, 150 to 180℃ F80 120 sec. max. HA0 to JH0 Time maintained Time maintained Peak temp. Reflow number above 217℃ above 230℃ 50 sec. max. 40 sec.max. 260℃ max. 2-cycles allowed 50 sec. max. 40 sec.max. 260℃ max. 1-cycle only 245℃ max. 2-cycles allowed Time (sec.) ● Recommended Solder Land on PC Board Size code c b a b Solder land on PC board E61 F61, F80 HA0 JA0 JC5 JH0 ◆RADIAL LEAD TYPE ● Recommended soldering heat conditions Preheat ：150℃ 120 seconds max. Flow soldering ：260+5℃ max. 10+1 seconds max. Terminal code：A a b c 1.4 3.0 1.6 1.9 3.5 1.6 3.1 4.2 2.2 4.5 4.4 2.2 4.5 4.4 2.2 4.0 4.7 2.5 [mm] Terminal code：G a b c 1.9 3.1 4.5 4.5 4.0 3.5 4.2 4.4 4.4 4.7 3.3 3.5 3.5 3.5 3.8 ◆PRECAUTIONS FOR USERS Soldering method SMD type have no capability to withstand such dip or wave soldering as totally immersing components into a solder bath. Reflow soldering Reflow the capacitors within Recommended Reflow Soldering Conditions. Verify there is no temperature stress to the capacitors because the following differences might degrade capacitors electrically and mechanically. Please consult with us if other reflow conditions are employed. 1.Location of components : Temperature increases at the edge of PC board more than the center. 2.Population of PC board : The lower the component population is, the more temperature rises. 3.Material of PC board : A ceramic-made board needs more heat than a glass epoxy-made board. The heat increase may cause damage to the capacitors. 4.Thickness of PC board : A thicker board needs more heat than a thinner board. The heat may damage the capacitors. 5.Size of PC board : A larger board needs more heat than a smaller board. The heat may damage the capacitors. 6.Solder thickness If very thin cream solder paste is to be used for SMD types, please consult with us. 7.Location of infrared ray lamps : IR reflow as well as hot plate reflow heats only on the reverse side of the PC board to lessen heat stress to the capacitors. 8.Case leakage current will increase (～mA) after the reflow process, the leakage current which rose gradually decreases when voltage is applied. 9.Please consult us about vapor phase soldering (VPS). Mechanical stress Do not grab the capacitors to lift the PC board and give stress to the capacitor. Avoid bending the PC board. This may damage the capacitors. Cleaning assembly board Immediately after solvent cleaning, remove residual solvent with an air knife for at least 10 minutes. If the solvent is insufficiently dry, the capacitors may corrode. Coating on assembly board 1.Before curing coating material, remove the cleaning solvents from the assembly board. 2.Before conformal coating, a chloride free pre-coat material is recommended to decrease the stress on the capacitors. Molding with resin Internal chemical reaction gradually produces gas in the capacitor; increasing internal pressure. If the end seal of the capacitor is completely coverd by resin the gas will be unable to escape causing a potentially dangerous situation. The chlorine in resin will penetrate the end seal, reach the element, and damage of the capacitor. Glue The followings are requirements for glue. 1.A low curing temperature over a short period of time 2.Strong adhension and heat resistance after curing 3.Long shelf life 4.No corrosion Others Refer to PRECAUTIONS AND GUIDELINES(Conductive Polymer Hybrid). Rework of soldering Use a soldering iron for rework. Do not exceed an iron tip temperature of 380±10℃ and an exposure time of 3±0.5 seconds. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart PART NUMBERING SYSTEM Product code guide (Conductive polymer hybrid Surface mount type) (Example : HXC series, 16V-82µF, φ6.3×5.8L) Please refer to the following table Contents Code Conductive Polymer Hybrid Series Code HXC HXC 4 5 Type Code No dummy terminal A With dummy terminal G H Tol.(%) Code ±20 M Terminal plating material Code Sn-Bi G 7 8 9 10 11 12 13 14 15 16 17 18 HXC 16 0 A RA 8 2 0 M F 61 G Series code Voltage code Terminal code Taping・Tray code Capacitance code 1 2 H Category 3 6 Capacitance tolerance Size code Supplement code φD(mm) Code L(mm) Code Cap.(µF) Code 10 100 6.3 F 22 220 8 H 33 330 10 J 82 820 630 100 101 800 220 221 330 331 Voltage(V) Code 16 160 25 250 35 350 50 500 63 80 Reel dia. Application size Code φ(mm) φD(mm) Type Plastic Reel φD=4 to 10 380 RA Refer to product guide for taping specifications. 5.8 7.7 10 12.5 16.0 61 80 A0 C5 H0 *Refer to the appendix (Part number) for codes not listed here. Product code guide (Conductive polymer hybrid Radial lead type) (Example : HSC series, 25V-330µF, φ10×12.5L, Long Lead with bulk) Please refer to the following table Contents Code Conductive Polymer Hybrid Series Code Type Code Tol.(%) Code HSC HSC Radial lead E ± 20 M Terminal plating material Code Sn S H 7 8 9 10 11 12 13 14 15 16 17 18 HSC 2 5 0 E L L 3 3 1 M J C5 S Series code Voltage code Terminal code Taping・Tray code Capacitance code 1 2 H Category 3 4 5 Voltage(V) Code 25 35 250 350 50 63 500 630 80 800 6 Type Capacitance tolerance Contents Code Cap.(µF) Code Lead forming (Bulk) Long Lead LL 100 101 Cut(3.5mm) C3 330 331 Cut(5.0mm) C5 Taping Straight TD Size code Supplement code φD(mm) Code J 10 L(mm) Code 12.5 C5 Refer to product guide for taping specifications. *Refer to the appendix (Part number) for codes not listed here. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS HXE Surface Mount Upgrade! Series ・High reliability is realized by hybrid electrolyte ・Endurance with ripple current : 2,000 to 4,000 hours at 135℃ ・Rated voltage range : 16 to 63Vdc, Capacitance range : 22 to 560μF ・For high temperature and high reliability applications. (Automotive equipment, Base station equipment, etc.) ・RoHS2 Compliant ・Halogen Free ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. HXE Higher temperature HXC ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +135℃ 16 to 63Vdc ±20% (M) I=0.01CV or 3μA, whichever is greater Where, I : Max. leakage current (μA） , C: Nominal capacitance(μF）, V : Rated voltage(V) Rated voltage(Vdc) 16V 25V 35V 50V 63V tanδ 0.16 0.14 0.12 0.10 0.08 （Max.) Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.5 Z(-55℃)/Z(+20℃)≦2.0 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 4,000 hours (F61, F80 : 2,000 hours) at 125℃ or 135℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 135℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 85℃, 85% RH for 2,000 hours. Appearance No significant damage Capacitance change ≦ ±30％ of the initial value D.F.（tanδ） ≦ 200％ of the initial specified value ESR ≦ 200％ of the initial specified value Leakage current ≦ The initial specified value Shelf Life Bias Humidity Test ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : F61 to JH0 ● Size code : F61 to JH0 (Except F61 to HA0) 0.3max. L±0.3 (Note) 0.3max. φD±0.5 P C±0.2 B±0.2 φD±0.5 W L±0.3 (Note) Note : L±0.5 for HA0 to JH0 A±0.2 Note : L±0.5 for HA0 to JH0 2 3 4 H HXE 5 6 7 8 9 10 RA 11 12 A±0.2 Size Code F61 F80 HA0 JA0 JC5 JH0 φD 6.3 6.3 8 10 10 10 L 5.8 7.7 10.0 10.0 12.5 16.5 A 6.6 6.6 8.3 10.3 10.3 10.3 B 6.6 6.6 8.3 10.3 10.3 10.3 C 7.2 7.2 9.0 11.0 11.0 11.0 W 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 P 1.9 1.9 3.1 4.5 4.5 4.5 : Dummy terminals ◆MARKING ◆PART NUMBERING SYSTEM 1 W P C±0.2 (Except F61 to HA0) B±0.2 Vent Vent 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470, 100µF:101) Taping code Terminal code (A, G) Voltage code (ex. 35V:350, 50V:500) Series code Category EX) 35V270µF 47E 270 V HE ●Rated voltage symbol Rated voltage (Vdc) 16 25 35 50 63 Symbol C E V H J Please refer to "Product code guide (conductive polymer hybrid type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Surface Mount HXESeries Upgrade! ◆STANDARD RATINGS WV (Vdc) 16 25 35 50 63 Cap (μF) Size code 82 150 270 470 560 56 100 220 330 470 560 47 68 150 270 330 470 33 47 56 68 100 120 150 220 22 33 33 47 56 82 100 150 F61 F80 HA0 JA0 JC5 F61 F80 HA0 JA0 JC5 JH0 F61 F80 HA0 JA0 JC5 JH0 HA0 HA0 JA0 HA0 JA0 JA0 JC5 JH0 HA0 HA0 JA0 HA0 JA0 JA0 JC5 JH0 ESR (mΩmax./20℃, 100kHz) 45 27 20 18 15 50 30 22 20 16 14 60 35 22 20 17 14 30 30 25 30 25 25 19 16 40 40 30 40 30 30 22 16 Rated ripple current (mArms/100kHz) 125℃ 135℃ 1,700 2,500 3,050 3,400 4,000 1,400 2,100 2,900 3,300 3,900 4,300 1,400 2,100 2,900 3,300 3,800 4,300 2,400 2,400 2,900 2,400 2,900 2,900 3,400 4,100 2,100 2,100 2,600 2,100 2,600 2,600 3,200 4,100 950 1,450 1,700 2,100 2,300 900 1,400 1,600 2,000 2,300 2,500 900 1,400 1,600 2,000 2,200 2,500 1,250 1,250 1,600 1,250 1,600 1,600 2,000 2,400 1,100 1,100 1,400 1,100 1,400 1,400 1,900 2,400 Part No. HHXE160□RA820MF61G HHXE160□RA151MF80G HHXE160□RA271MHA0G HHXE160□RA471MJA0G HHXE160□RA561MJC5G HHXE250□RA560MF61G HHXE250□RA101MF80G HHXE250□RA221MHA0G HHXE250□RA331MJA0G HHXE250□RA471MJC5G HHXE250□RA561MJH0G HHXE350□RA470MF61G HHXE350□RA680MF80G HHXE350□RA151MHA0G HHXE350□RA271MJA0G HHXE350□RA331MJC5G HHXE350□RA471MJH0G HHXE500□RA330MHA0G HHXE500□RA470MHA0G HHXE500□RA560MJA0G HHXE500□RA680MHA0G HHXE500□RA101MJA0G HHXE500□RA121MJA0G HHXE500□RA151MJC5G HHXE500□RA221MJH0G HHXE630□RA220MHA0G HHXE630□RA330MHA0G HHXE630□RA330MJA0G HHXE630□RA470MHA0G HHXE630□RA560MJA0G HHXE630□RA820MJA0G HHXE630□RA101MJC5G HHXE630□RA151MJH0G □ : Enter the appropriate terminal code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 22 to 33 47 to 150 220 to 560 120 0.07 0.10 0.13 1k 0.30 0.40 0.45 5k 0.50 0.60 0.65 10k 0.60 0.70 0.75 20k 0.70 0.80 0.85 30k 0.75 0.80 0.85 100k to 500k 1.00 1.00 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS HXJ Surface Mount New! Series ・High reliability is realized by hybrid electrolyte ・Endurance with ripple current : 4,000 hours at 125℃ ・Rated voltage range : 16 to 63Vdc, Capacitance range : 56 to 820μF ・For high temperature and high reliability applications. (Automotive equipment, Base station equipment, etc.) ・RoHS2 Compliant ・Halogen Free ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. HXJ Higher capacitance HXC ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +125℃ 16 to 63Vdc ±20% (M) I=0.01CV or 3μA, whichever is greater Where, I : Max. leakage current (μA） , C: Nominal capacitance(μF）, V : Rated voltage(V) Rated voltage(Vdc) 16V 25V 35V 50V 63V tanδ 0.16 0.14 0.12 0.10 0.08 （Max.) Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.5 Z(-55℃)/Z(+20℃)≦2.0 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 4,000 hours at 125℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 85℃, 85% RH for 2,000 hours. Appearance No significant damage Capacitance change ≦ ±30％ of the initial value D.F.（tanδ） ≦ 200％ of the initial specified value ESR ≦ 200％ of the initial specified value Leakage current ≦ The initial specified value Shelf Life Bias Humidity Test ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : F61 to JA0 ● Size code : F61 to JA0 Vent for JA0 Vent for JA0 0.3max. W 0.3max. L±0.3 (Note) L±0.3 (Note) Note : L±0.5 for HA0 and JA0 A±0.2 Note : L±0.5 for HA0 and JA0 2 3 4 H HXJ 5 6 7 8 9 10 RA 11 12 Size Code F61 F80 HA0 JA0 φD 6.3 6.3 8 10 L 5.8 7.7 10.0 10.0 A 6.6 6.6 8.3 10.3 B 6.6 6.6 8.3 10.3 C 7.2 7.2 9.0 11.0 W 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.9 1.9 3.1 4.5 A±0.2 : Dummy terminals ◆MARKING ◆PART NUMBERING SYSTEM 1 P C±0.2 B±0.2 φD±0.5 P C±0.2 B±0.2 φD±0.5 W 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 82µF:820, 470µF:471) Taping code Terminal code (A, G) Voltage code (ex. 16V:160, 50V:500) Series code Category EX) 35V330µF 551 330 V HJ ●Rated voltage symbol Rated voltage (Vdc) 16 25 35 50 63 Symbol C E V H J Please refer to "Product code guide (conductive polymer hybrid type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Surface Mount HXJSeries New! ◆STANDARD RATINGS WV (Vdc) 16 25 35 50 63 Cap (μF) Size code ESR (mΩmax./20℃, 100kHz) Rated ripple current (mArms/125℃, 100kHz) Part No. 150 220 470 820 68 82 100 150 180 270 330 470 560 56 68 100 120 180 220 330 390 82 150 56 100 F61 F80 HA0 JA0 F61 F61 F61 F80 F80 HA0 HA0 JA0 JA0 F61 F61 F80 F80 HA0 HA0 JA0 JA0 HA0 JA0 HA0 JA0 45 27 20 18 50 50 50 30 30 22 22 20 20 60 60 35 35 22 22 20 20 30 25 40 30 1,080 1,800 2,000 2,800 1,300 1,300 1,300 1,800 1,800 2,000 2,000 2,800 2,800 1,200 1,200 1,700 1,700 2,000 2,000 2,800 2,800 1,700 2,000 1,700 2,000 HHXJ160□RA151MF61G HHXJ160□RA221MF80G HHXJ160□RA471MHA0G HHXJ160□RA821MJA0G HHXJ250□RA680MF61G HHXJ250□RA820MF61G HHXJ250□RA101MF61G HHXJ250□RA151MF80G HHXJ250□RA181MF80G HHXJ250□RA271MHA0G HHXJ250□RA331MHA0G HHXJ250□RA471MJA0G HHXJ250□RA561MJA0G HHXJ350□RA560MF61G HHXJ350□RA680MF61G HHXJ350□RA101MF80G HHXJ350□RA121MF80G HHXJ350□RA181MHA0G HHXJ350□RA221MHA0G HHXJ350□RA331MJA0G HHXJ350□RA391MJA0G HHXJ500□RA820MHA0G HHXJ500□RA151MJA0G HHXJ630□RA560MHA0G HHXJ630□RA101MJA0G □ : Enter the appropriate terminal code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 56 to 82 100 to 820 120 0.15 0.15 1k 0.50 0.50 5k 0.70 0.70 10k 0.75 0.75 20k 0.80 0.85 30k 0.80 0.85 100k to 500k 1.00 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS HXC Surface Mount Upgrade! Series ・High reliability and high voltage are realized by hybrid electrolyte ・Endurance with ripple current : 4,000 hours at 125℃ ・Rated voltage range : 16 to 63Vdc, Capacitance range : 6.8 to 560μF ・For high temperature and high reliability applications. (Automotive equipment, Base station equipment, etc.) ・RoHS2 Compliant ・Halogen Free ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. HXC Higher temperature HXD ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +125℃ 16 to 63Vdc ±20% (M) I=0.01CV or 3μA, whichever is greater Where, I : Max. leakage current (μA） , C: Nominal capacitance(μF）, V : Rated voltage(V) Rated voltage(Vdc) 16V 25V 35V 50V 63V tanδ 0.16 0.14 0.12 0.10 0.08 （Max.) Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.5 Z(-55℃)/Z(+20℃)≦2.0 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 4,000 hours at 125℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 85℃, 85% RH for 2,000 hours. Appearance No significant damage Capacitance change ≦ ±30％ of the initial value D.F.（tanδ） ≦ 200％ of the initial specified value ESR ≦ 200％ of the initial specified value Leakage current ≦ The initial specified value Shelf Life Bias Humidity Test ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : E61 to JC5 ● Size code : F61 to JC5 (Except F61 to HA0) 0.3max. L±0.3 (Note) 0.3max. φD±0.5 P C±0.2 B±0.2 φD±0.5 W L±0.3 (Note) Note : L±0.5 for HA0 to JC5 A±0.2 Note : L±0.5 for HA0 to JC5 2 3 4 H HXC 5 6 7 8 9 10 RA A±0.2 Size Code E61 F61 F80 HA0 JA0 JC5 φD 5 6.3 6.3 8 10 10 L 5.8 5.8 7.7 10.0 10.0 12.5 A 5.3 6.6 6.6 8.3 10.3 10.3 B 5.3 6.6 6.6 8.3 10.3 10.3 C 5.9 7.2 7.2 9.0 11.0 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 P 1.4 1.9 1.9 3.1 4.5 4.5 : Dummy terminals ◆MARKING ◆PART NUMBERING SYSTEM 1 W P C±0.2 (Except E61 to HA0) B±0.2 Vent Vent 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470, 100µF:101) Taping code Terminal code Voltage code (ex. 35V:350, 50V:500) Series code Category EX) 35V270µF 47E 270 V HC ●Rated voltage symbol Rated voltage (Vdc) 16 25 35 50 63 Symbol C E V H J Please refer to "Product code guide (conductive polymer hybrid type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Surface Mount HXCSeries Upgrade! ◆STANDARD RATINGS WV (Vdc) 16 25 35 50 63 Cap (µF) Size code ESR （mΩmax./20℃, 100kHz） Rated ripple current （mArms/125℃, 100kHz) Part No. 47 82 150 270 470 560 33 47 56 68 100 150 220 270 330 470 22 27 47 47 68 100 150 150 270 330 10 15 22 33 33 47 56 68 100 120 150 6.8 10 10 22 22 33 33 47 56 82 100 E61 F61 F80 HA0 JA0 JC5 E61 F61 F61 F80 F80 HA0 HA0 JA0 JA0 JC5 E61 F61 F61 F80 F80 HA0 HA0 JA0 JA0 JC5 F61 F80 F61 F80 HA0 HA0 JA0 HA0 JA0 JA0 JC5 F61 F61 F80 F80 HA0 HA0 JA0 HA0 JA0 JA0 JC5 80 45 27 22 18 15 80 50 50 30 30 27 27 20 20 16 100 60 60 35 35 27 27 20 20 17 80 40 80 40 30 30 25 30 25 25 19 120 120 80 80 40 40 30 40 30 30 22 550 950 1,450 1,700 2,100 2,320 550 900 900 1,400 1,400 1,600 1,600 2,000 2,000 2,300 550 900 900 1,400 1,400 1,600 1,600 2,000 2,000 2,200 750 1,100 750 1,100 1,250 1,250 1,600 1,250 1,600 1,600 2,000 700 700 900 900 1,100 1,100 1,400 1,100 1,400 1,400 1,900 HHXC160ARA470ME61G HHXC160□RA820MF61G HHXC160□RA151MF80G HHXC160□RA271MHA0G HHXC160□RA471MJA0G HHXC160□RA561MJC5G HHXC250ARA330ME61G HHXC250□RA470MF61G HHXC250□RA560MF61G HHXC250□RA680MF80G HHXC250□RA101MF80G HHXC250□RA151MHA0G HHXC250□RA221MHA0G HHXC250□RA271MJA0G HHXC250□RA331MJA0G HHXC250□RA471MJC5G HHXC350ARA220ME61G HHXC350□RA270MF61G HHXC350□RA470MF61G HHXC350□RA470MF80G HHXC350□RA680MF80G HHXC350□RA101MHA0G HHXC350□RA151MHA0G HHXC350□RA151MJA0G HHXC350□RA271MJA0G HHXC350□RA331MJC5G HHXC500□RA100MF61G HHXC500□RA150MF80G HHXC500□RA220MF61G HHXC500□RA330MF80G HHXC500□RA330MHA0G HHXC500□RA470MHA0G HHXC500□RA560MJA0G HHXC500□RA680MHA0G HHXC500□RA101MJA0G HHXC500□RA121MJA0G HHXC500□RA151MJC5G HHXC630□RA6R8MF61G HHXC630□RA100MF61G HHXC630□RA100MF80G HHXC630□RA220MF80G HHXC630□RA220MHA0G HHXC630□RA330MHA0G HHXC630□RA330MJA0G HHXC630□RA470MHA0G HHXC630□RA560MJA0G HHXC630□RA820MJA0G HHXC630□RA101MJC5G □ : Enter the appropriate terminal code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) to 10 15 to 33 47 to 150 220 to 560 120 0.03 0.07 0.10 0.13 1k 0.30 0.30 0.40 0.45 5k 0.50 0.50 0.60 0.65 10k 0.60 0.60 0.70 0.75 20k 0.70 0.70 0.80 0.85 30k 0.75 0.75 0.80 0.85 100k to 500k 1.00 1.00 1.00 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS HXD Surface Mount Upgrade! Series ・High reliability and high voltage are realized by hybrid electrolyte ・Endurance with ripple current : 5,000 to 10,000 hours at 105℃ ・Rated voltage range : 16 to 80Vdc, Capacitance range : 6.8 to 560μF ・For high reliability applications. (Automotive equipment, Base station equipment, etc.) ・RoHS2 Compliant ・Halogen Free ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. HXC Higher temperature HXD ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105℃ 16 to 80Vdc ±20% (M) I=0.01CV or 3μA, whichever is greater Where, I : Max. leakage current (μA） , C: Nominal capacitance(μF）, V : Rated voltage(V) Rated voltage(Vdc) 16V 25V 35V 50V 63V 80V tanδ 0.16 0.14 0.12 0.10 0.08 0.08 （Max.) Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.5 Z(-55℃)/Z(+20℃)≦2.0 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours (E61 and F61: 5,000 hours) at 105 ℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105 ℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 85℃, 85% RH for 2,000 hours. Appearance No significant damage Capacitance change ≦ ±30％ of the initial value D.F. (tanδ) ≦ 200％ of the initial specified value ESR ≦ 200％ of the initial specified value Leakage current ≦ The initial specified value Shelf Life Bias Humidity Test ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : E61 to JA0 ● Size code : F61 to JA0 Vent for JA0 Vent for JA0 0.3max. W 0.3max. L±0.3 (Note) L±0.3 (Note) Note : L±0.5 for HA0 and JA0 A±0.2 Note : L±0.5 for HA0 and JA0 2 3 4 H HXD 5 6 7 8 9 10 RA 11 12 Size Code E61 F61 F80 HA0 JA0 φD 5 6.3 6.3 8 10 L 5.8 5.8 7.7 10.0 10.0 A 5.3 6.6 6.6 8.3 10.3 B 5.3 6.6 6.6 8.3 10.3 C 5.9 7.2 7.2 9.0 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.4 1.9 1.9 3.1 4.5 A±0.2 : Dummy terminals ◆MARKING ◆PART NUMBERING SYSTEM 1 P C±0.2 B±0.2 φD±0.5 P C±0.2 B±0.2 φD±0.5 W 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470, 100µF:101) Taping code Terminal code Voltage code (ex. 35V:350, 50V:500) Series code Category EX) 35V47µF 26A 47 V HD ●Rated voltage symbol Rated voltage (Vdc) 16 25 35 50 63 80 Symbol C E V H J K Please refer to "Product code guide (conductive polymer hybrid type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Surface Mount HXDSeries Upgrade! ◆STANDARD RATINGS WV (Vdc) 16 25 35 50 63 80 Cap (µF) Size code ESR （mΩmax./20℃, 100kHz） Rated ripple current （mArms/105℃, 100kHz) Part No. 47 100 180 330 560 33 47 56 68 100 150 220 270 330 390 22 27 47 47 68 100 150 150 270 10 15 22 33 33 47 56 82 100 120 6.8 10 10 22 22 33 33 47 56 100 56 E61 F61 F80 HA0 JA0 E61 F61 F61 F80 F80 HA0 HA0 JA0 JA0 JA0 E61 F61 F61 F80 F80 HA0 HA0 JA0 JA0 F61 F80 F61 F80 HA0 HA0 JA0 HA0 JA0 JA0 F61 F61 F80 F80 HA0 HA0 JA0 HA0 JA0 JA0 JA0 80 45 27 22 18 80 50 50 30 30 27 27 20 20 20 100 60 60 35 35 27 27 20 20 80 40 80 40 30 30 25 30 25 25 120 120 80 80 40 40 30 40 30 30 33 900 1,600 2,200 2,500 2,600 900 1,300 1,300 2,000 2,000 2,300 2,300 2,500 2,500 2,500 900 1,300 1,300 2,000 2,000 2,300 2,300 2,500 2,500 1,100 1,600 1,100 1,600 1,800 1,800 2,400 1,800 2,400 2,400 1,000 1,000 1,500 1,500 1,600 1,600 2,400 1,600 2,400 2,400 2,400 HHXD160ARA470ME61G HHXD160□RA101MF61G HHXD160□RA181MF80G HHXD160□RA331MHA0G HHXD160□RA561MJA0G HHXD250ARA330ME61G HHXD250□RA470MF61G HHXD250□RA560MF61G HHXD250□RA680MF80G HHXD250□RA101MF80G HHXD250□RA151MHA0G HHXD250□RA221MHA0G HHXD250□RA271MJA0G HHXD250□RA331MJA0G HHXD250□RA391MJA0G HHXD350ARA220ME61G HHXD350□RA270MF61G HHXD350□RA470MF61G HHXD350□RA470MF80G HHXD350□RA680MF80G HHXD350□RA101MHA0G HHXD350□RA151MHA0G HHXD350□RA151MJA0G HHXD350□RA271MJA0G HHXD500□RA100MF61G HHXD500□RA150MF80G HHXD500□RA220MF61G HHXD500□RA330MF80G HHXD500□RA330MHA0G HHXD500□RA470MHA0G HHXD500□RA560MJA0G HHXD500□RA820MHA0G HHXD500□RA101MJA0G HHXD500□RA121MJA0G HHXD630□RA6R8MF61G HHXD630□RA100MF61G HHXD630□RA100MF80G HHXD630□RA220MF80G HHXD630□RA220MHA0G HHXD630□RA330MHA0G HHXD630□RA330MJA0G HHXD630□RA470MHA0G HHXD630□RA560MJA0G HHXD630□RA101MJA0G HHXD800□RA560MJA0G □ : Enter the appropriate terminal code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) to 10 15 to 33 47 to 180 220 to 560 120 0.03 0.07 0.10 0.13 1k 0.30 0.30 0.40 0.45 5k 0.50 0.50 0.60 0.65 10k 0.60 0.60 0.70 0.75 20k 0.70 0.70 0.80 0.85 30k 0.75 0.75 0.80 0.85 100k to 500k 1.00 1.00 1.00 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS HXA Surface Mount Upgrade! Series ・High reliability and high voltage are realized by hybrid electrolyte ・Endurance with ripple current : 4,000 hours at 125℃ ・For high temperature and high reliability applications. (Automotive equipment, Base station equipment, etc.) ・RoHS2 Compliant ・Halogen Free ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. HXA Higher temperature HXB ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +125℃ 80Vdc ±20% (M) I=0.01CV or 3μA, whichever is greater Where, I : Max. leakage current (μA） , C: Nominal capacitance(μF）, V : Rated voltage(V) Rated voltage(Vdc) 80V tanδ 0.08 （Max.) Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.5 Z(-55℃)/Z(+20℃)≦2.0 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 4,000 hours at 125℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value Shelf Life ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : HA0 and JA0 ● Size code : HA0 and JA0 Vent for JA0 Vent for JA0 0.3max. W 0.3max. L±0.5 L±0.5 A±0.2 Size Code HA0 φD 8 L 10.0 A 8.3 B 8.3 C 9.0 W 0.7 to 1.1 P 3.1 JA0 10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5 P C±0.2 B±0.2 φD±0.5 P C±0.2 B±0.2 φD±0.5 W A±0.2 : Dummy terminals ◆MARKING ◆PART NUMBERING SYSTEM 1 2 3 4 H HXA 5 6 7 8 9 10 RA 11 12 13 14 M 15 16 17 18 EX) 80V22µF G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 22µF:220) Taping code Terminal code Voltage code (ex. 80V:800) Series code Category 26A 22 K HA ●Rated voltage symbol Rated voltage (Vdc) 80 Symbol K Please refer to "Product code guide (conductive polymer hybrid type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.2 Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Surface Mount HXASeries Upgrade! ◆STANDARD RATINGS WV (Vdc) Cap (µF) Size code ESR （mΩmax./20℃, 100kHz） Rated ripple current （mArms/125℃, 100kHz) Part No. 80 22 39 47 HA0 JA0 JA0 45 35 33 1,100 1,200 1,700 HHXA800□RA220MHA0G HHXA800□RA390MJA0G HHXA800□RA470MJA0G □ : Enter the appropriate terminal code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 22 39 to 47 120 0.07 0.10 1k 0.30 0.40 5k 0.50 0.60 10k 0.60 0.70 20k 0.70 0.80 30k 0.75 0.80 100k to 500k 1.00 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Surface Mount HXB Series ・High reliability and high voltage are realized by hybrid electrolyte ・Endurance with ripple current : 5,000 hours at 105℃ ・For high reliability applications. (Automotive equipment, Base station equipment, etc.) ・RoHS2 Compliant ・Halogen Free ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. HXA Higher temperature HXB ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105℃ 80Vdc ±20% (M) I=0.01CV or 3μA, whichever is greater Where, I : Max. leakage current (μA） , C: Nominal capacitance(μF）, V : Rated voltage(V) Rated voltage(Vdc) 80V tanδ 0.08 （Max.) Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.5 Z(-55℃)/Z(+20℃)≦2.0 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105 ℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105 ℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value Shelf Life ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : HA0 and JA0 ● Size code : HA0 and JA0 Vent for JA0 Vent for JA0 0.3max. W 0.3max. L±0.5 L±0.5 A±0.2 P C±0.2 B±0.2 φD±0.5 P C±0.2 B±0.2 φD±0.5 W Size Code HA0 JA0 φD 8 10 L 10.0 10.0 A 8.3 10.3 B 8.3 10.3 C 9.0 11.0 W 0.7 to 1.1 0.7 to 1.1 P 3.1 4.5 A±0.2 : Dummy terminals ◆MARKING ◆PART NUMBERING SYSTEM 1 2 3 4 H HXB 5 6 7 8 9 10 RA 11 12 13 14 M 15 16 17 18 EX) 80V22µF G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 22µF:220) Taping code Terminal code Voltage code (ex. 80V:800) Series code Category 26A 22 K HB ●Rated voltage symbol Rated voltage (Vdc) 80 Symbol K Please refer to "Product code guide (conductive polymer hybrid type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.2 Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Surface Mount HXBSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Size code ESR （mΩmax./20℃, 100kHz） Rated ripple current （mArms/105℃, 100kHz) Part No. 80 22 39 HA0 JA0 45 35 1,600 1,700 HHXB800□RA220MHA0G HHXB800□RA390MJA0G □ : Enter the appropriate terminal code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) Capacitance(µF) 22 39 120 0.07 0.10 1k 0.30 0.40 5k 0.50 0.60 10k 0.60 0.70 20k 0.70 0.80 30k 0.75 0.80 100k to 500k 1.00 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Radial Lead HSE Series ・High reliability and high voltage are realized by hybrid electrolyte ・Endurance with ripple current : 4,000 hours at 135℃ ・Rated voltage range : 25 to 63Vdc, Capacitance range : 100 to 330μF ・For high temperature and high reliability applications. (Automotive equipment, Base station equipment, etc.) ・RoHS2 Compliant ・Halogen Free ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. HSE Higher temperature HSC ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +135℃ 25 to 63Vdc ±20% (M) I=0.05CV Where, I : Max. leakage current (μA） , C: Nominal capacitance(μF）, V : Rated voltage(V) Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.5 Z(-55℃)/Z(+20℃)≦2.0 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 4,000 hours at 125℃ or 135℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 135℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 85℃, 85% RH for 2,000 hours. Appearance No significant damage Capacitance change ≦ ±30％ of the initial value D.F.（tanδ） ≦ 200％ of the initial specified value ESR ≦ 200％ of the initial specified value Leakage current ≦ The initial specified value Bias Humidity Test ◆DIMENSIONS [mm] ◆MARKING EX) 35V270µF ●Terminal Code : E φD' φd F±0.5 Coated Case L' 15min. 6DK Size Code φD φd F φD' L' 4min. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 E (at 20℃ after 2 minutes) 0.16 max. Shelf Life H HSE (at 20℃, 120Hz) 9 10 11 12 13 14 15 16 17 18 M J C5 S JC5 10 0.6 5.0 φD+0.5max. L+1.5max. 270 V HE ●Rated voltage symbol Rated voltage (Vdc) 25 35 50 63 Symbol E V H J Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470, 100µF:101) Lead forming Taping code Terminal code Voltage code (ex. 35V:350, 50V:500) Series code Category Please refer to "Product code guide (conductive polymer hybrid type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.2 Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Radial Lead HSESeries ◆STANDARD RATINGS WV （Vdc） Cap （µF） Case size φD×L（mm） ESR （mΩ max./20℃, 100kHz） 25 330 10×12.5 35 270 10×12.5 50 120 10×12.5 63 100 10×12.5 □□:Enter the appropriate lead forming or taping code. 16 17 19 20 Rated ripple current （mArms/100kHz） 125℃ 135℃ 3,800 3,700 3,500 3,400 2,300 2,200 2,100 2,000 Part No. HHSE250E□□331MJC5S HHSE350E□□271MJC5S HHSE500E□□121MJC5S HHSE630E□□101MJC5S ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 100, 120 270, 330 120 0.10 0.13 1k 0.40 0.45 5k 0.60 0.65 10k 0.70 0.75 20k 0.80 0.85 30k 0.80 0.85 100k to 500k 1.00 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Radial Lead HSC Series ・High reliability and high voltage are realized by hybrid electrolyte ・Endurance with ripple current : 4,000 hours at 125℃ ・Rated voltage range : 25 to 63Vdc, Capacitance range : 100 to 330μF ・For high temperature and high reliability applications. (Automotive equipment, Base station equipment, etc.) ・RoHS2 Compliant ・Halogen Free ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. HSC Higher temperature HSD ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +125℃ 25 to 63Vdc ±20% (M) I=0.05CV Where, I : Max. leakage current (μA） , C: Nominal capacitance(μF）, V : Rated voltage(V) Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.5 Z(-55℃)/Z(+20℃)≦2.0 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 4,000 hours at 125℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 85℃, 85% RH for 2,000 hours. Appearance No significant damage Capacitance change ≦ ±30％ of the initial value D.F.（tanδ） ≦ 200％ of the initial specified value ESR ≦ 200％ of the initial specified value Leakage current ≦ The initial specified value Bias Humidity Test ◆DIMENSIONS [mm] ◆MARKING EX) 25V330µF ●Terminal Code : E φD' φd F±0.5 Coated Case L' 15min. 4D8 Size Code φD φd F φD' L' 4min. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 E (at 20℃ after 2 minutes) 0.16 max. Shelf Life H HSC (at 20℃, 120Hz) 9 10 11 12 13 14 15 16 17 18 M J C5 S JC5 10 0.6 5.0 φD+0.5max. L+1.5max. 330 E HC ●Rated voltage symbol Rated voltage (Vdc) 25 35 50 63 Symbol E V H J Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470, 100µF:101) Lead forming Taping code Terminal code Voltage code (ex. 35V:350, 50V:500) Series code Category Please refer to "Product code guide (conductive polymer hybrid type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.2 Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Radial Lead HSCSeries ◆STANDARD RATINGS WV （Vdc） Cap （µF） Case size φD×L（mm） ESR （mΩ max./20℃, 100kHz） Rated ripple current （mArms/125℃, 100kHz） Part No. 16 17 19 20 2,300 2,200 2,100 2,000 HHSC250E□□331MJC5S HHSC350E□□271MJC5S HHSC500E□□121MJC5S HHSC630E□□101MJC5S 25 330 10×12.5 35 270 10×12.5 50 120 10×12.5 63 100 10×12.5 □□:Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 100, 120 270, 330 120 0.10 0.13 1k 0.40 0.45 5k 0.60 0.65 10k 0.70 0.75 20k 0.80 0.85 30k 0.80 0.85 100k to 500k 1.00 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS HSD Radial Lead Upgrade! Series ・High reliability and high voltage are realized by hybrid electrolyte ・Endurance with ripple current : 10,000 hours at 105℃ ・Rated voltage range : 25 to 80Vdc, Capacitance range : 68 to 470μF ・For high reliability applications. (Automotive equipment, Base station equipment, etc.) ・RoHS2 Compliant ・Halogen Free ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. HSC Higher temperature HSD ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105℃ 25 to 80Vdc ±20% (M) I=0.05CV Where, I : Max. leakage current (μA） , C: Nominal capacitance(μF）, V : Rated voltage(V) Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.5 Z(-55℃)/Z(+20℃)≦2.0 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours at 105 ℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105 ℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦ 200% of the initial specified value ESR ≦ 200% of the initial specified value Leakage current ≦ The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 85℃, 85% RH for 2,000 hours. Appearance No significant damage Capacitance change ≦ ±30％ of the initial value D.F.（tanδ） ≦ 200％ of the initial specified value ESR ≦ 200％ of the initial specified value Leakage current ≦ The initial specified value Bias Humidity Test ◆DIMENSIONS [mm] ◆MARKING EX) 25V330µF ●Terminal Code : E φD' φd F±0.5 Coated Case L' 15min. 4D8 Size Code φD φd F φD' L' 4min. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 E (at 20℃ after 2 minutes) 0.16 max. Shelf Life H HSD (at 20℃, 120Hz) 9 10 11 12 13 14 15 16 17 18 M J C5 S JC5 10 0.6 5.0 φD+0.5max. L+1.5max. 330 E HD ●Rated voltage symbol Rated voltage (Vdc) 25 35 50 63 80 Symbol E V H J K Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100µF:101, 330µF:331) Taping code Lead forming Terminal code Voltage code (ex. 35V:350, 50V:500) Series code Category Please refer to "Product code guide (conductive polymer hybrid type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Radial Lead HSDSeries Upgrade! ◆STANDARD RATINGS WV （Vdc） Cap（µF） Case sizeφ D×L（mm） ESR （mΩ max./20℃, 100kHz） Rated ripple current （mArms/105℃, 100kHz） Part No. 16 17 19 20 28 3,100 3,000 3,000 3,000 3,000 HHSD250E□□471MJC5S HHSD350E□□331MJC5S HHSD500E□□181MJC5S HHSD630E□□121MJC5S HHSD800E□□680MJC5S 25 470 10×12.5 35 330 10×12.5 50 180 10×12.5 63 120 10×12.5 80 68 10×12.5 □□:Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 68 to 180 390, 470 120 0.10 0.13 1k 0.40 0.45 5k 0.60 0.65 10k 0.70 0.75 20k 0.80 0.85 30k 0.80 0.85 100k to 500k 1.00 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart Aluminum Electrolytic Capacitors Return Group Chart Precautions and Guidelines (Aluminum Electrolytic Capacitors) The circuits described as examples in this catalog and the "delivery specifications" are featured in order to show the operations and usage of our products, however, this fact does not guarantee that the circuits are available to function in your equipment systems. We are not in any case responsible for any failures or damage caused by the use of information contained herein. You should examine our products, of which the characteristics are described in the "delivery specifications" and other documents, and determine whether or not our products suit your requirements according to the specifications of your equipment systems. Therefore, you bear final responsibility regarding the use of our products. Please make sure that you take appropriate safety measures such as use of redundant design and malfunction prevention measures in order to prevent fatal accidents and/or fires in the event any of our products malfunction. For Conductive Polymer Aluminum Solid Capacitors, see Precautions and Guidelines (Conductive Polymer). For Conductive Polymer Hybrid Aluminum Electrolytic Capacitors, see Precautions and Guidelines (Conductive Polymer Hybrid). 1 Device circuits design considerations 1) Confirm installation and operating requirements for capacitors, then use them within the performance limits prescribed in this catalog or product specifications. 2 ) Polarity Aluminum electrolytic capacitors are polarized. Never apply a reverse voltage or AC voltage. Connecting with wrong polarity will short-circuit or damage the capacitor with the pressure relief vent opening early on. To identify the polarity of a capacitor, see the relevant diagram in the catalogs or product specifications, or the polarity marking on the body of the capacitor. Incidentally, the rubber end seal bungs of the radial lead type capacitors have a solder-flux gas escaping configuration, which is nothing to do with the polarity of the capacitors. For circuits where the polarity is occasionally reversed, use a bipolar type of aluminum electrolytic capacitor. However, note that even bi-polar type capacitors must not be used for AC circuits. 3) Operating voltage Do not apply an over-voltage that exceeds a rated voltage specified for the capacitors. The total peak value of the ripple voltage plus the DC voltage must not exceed the rated voltage of the capacitors. Although capacitors specify a surge voltage that exceeds the full rated voltage, it does not assure long-term use but limited use under specific conditions. 4) Ripple current 7) Charging and discharging Do not use capacitors in circuits intended for rapid charge and discharge cycle operations. If capacitors are used in the circuits that repeat a charge and discharge with a large voltage drop or a rapid charge and discharge at a short interval cycle, capacitance will decrease and/ or the capacitors will be damaged by internal heat generation. Consult us for a heavy charge and discharge type of capacitor so that the capacitor will be designed in accordance with requirements of duty cycle of charge and discharge, the number of cycles, discharging resistance and operating temperatures. 8) Failure mode of capacitors Non-solid aluminum electrolytic capacitors have a limited lifetime which ends in an open circuit failure mode, in general. Depending on the product type and operating conditions, the failure mode may involve in opening of the pressure relief vent. 9) Capacitor insulation Electrically isolate the following sections of a capacitor from the negative terminal, the positive terminal and the circuit patterns. • The outer can case of a non-solid aluminum capacitor. • The dummy terminal of a snap-in type non-solid aluminum capacitor, which is designed for mounting stability. 10) Outer sleeve The outer sleeve of a capacitor does not assure electrical insulation (except for screw-terminal type capacitors). It should not be used where electrical insulation is required. Do not apply an overcurrent that exceeds the rated ripple current specified for the capacitors. Excessive ripple current will increase heat production within the capacitors, causing the capacitors to be damaged as follows: • Shorten lifetime • Open pressure relief vent • Short circuit The rated ripple current is specified along with a specific ripple frequency. Where using the capacitors at any other ripple frequency other than the specified frequency, calculate the allowable ripple current by multiplying the rated ripple current by a frequency compensation factor (Frequency Multiplier) specified for each product series. 11) Operating conditions 5) Operating temperature (Category temperature) ① Non-solid aluminum electrolytic capacitors contain paper separators and electric-conductive electrolyte that contains organic solvent as main solvent material, both of which are flammable. If the electrolyte leaks onto a printed circuit board, it can erode the device circuit pattern, may short-circuit the copper traces, smoke and burn. Make sure of designing a PC board as follows: • Provide the appropriate hole spacing on the PC board to match the terminal spacing of a capacitor. • Provide the following adequate clearance space over the pressure relief vent of a capacitor to avoid blocking the correct opening of the pressure relief vent. Do not apply high temperatures that exceed the upper limit of the category temperature range specified for the capacitors. Using the capacitor at temperatures higher than the upper limit will considerably shorten the lifetime of the capacitor and make the pressure relief vent open. In other words, lowering ambient temperatures will extend the expected lifetime of the capacitors. 6) Lifetime Select the capacitors to meet the service life requirements of a device. Do not use/expose capacitors to the following conditions: ① Direct contact with water, salt water or oil, or high condensation environment. ② Direct sunlight. ③ Toxic gases such as hydrogen sulfide, sulfurous acid, nitrous acid, chlorine and its compounds, bromine and its compounds and ammonium. ④ Ozone, ultraviolet rays or radiation. ⑤ Extreme vibration or mechanical shock that exceeds limits in the catalogs or product specifications. The standard vibration condition is applicable to JIS C 5101-4. 12) Mounting Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart Precautions and Guidelines (Aluminum Electrolytic Capacitors) Case diameter Clearance φ8(6.3) toφ16mm: 2mm minimum φ18 toφ35mm: 3mm minimum φ40 mm and above: 5mm minimum • Do not locate any wire or circuit pattern over the pressure relief vent of a capacitor. • If a capacitor is mounted with its pressure relief vent facing down on the PC board, provide a ventilation hole in the board beneath it to let gas escape when the vent opens. • Do not print any copper trace under the seal (terminal) side of a capacitor. Copper traces should be 1 mm (preferably 2mm or more) spaced apart from the side of the capacitor body. • Avoid locating any heat source components near capacitors or on the opposite side of the PC board under capacitors. • In designing a double-sided PC board, do not locate any through-hole via or unnecessary hole underneath a capacitor. • In designing a double-sided PC board, do not print any circuit pattern underneath a capacitor. ② For a screw terminal type capacitor, tightening the terminal screws and the mounting clamp should be within the maximum torque specified in the catalogs or product specifications. Do not mount a screw terminal type capacitor with the terminals facing downward. Also, if the body of a capacitor is installed horizontally such as being laid on its side, do not position the pressure relief vent downward. ③ For a chip type capacitor, design the land patterns of the PC board in accordance with the recommended footprint dimensions described in the catalogs or product specifications. 13) Using capacitors for significantly safety-oriented applications Consult with us in advance of usage of our products in the following listed applications. ① Aerospace equipment ② Power generation equipment such as thermal power, nuclear power etc. ③ Medical equipment ④ Transport equipment (automobiles, trains, ships, etc.) ⑤ Transportation control equipment ⑥ Disaster prevention / crime prevention equipment ⑦ Highly publicized information processing equipment ⑧ Submarine equipment ⑨ Other applications that are not considered general-purpose applications. Note that some products such as photoflash use capacitors which have been designed for specific applications cannot be used for any other application. 14) Others Design device circuits taking into consideration the following conditions: ① Electrical characteristics of a capacitor depend on the temperature and frequency. In designing the device circuits, consider the change in the characteristics. ② If using more than one capacitor connected in parallel, design the device circuits to balance the current flow in individual capacitors. ③ If using more than one capacitor connected in series, connect shunting resistors in parallel with the individual capacitors to balance the voltage. 2 Installation 1) Assembling ① Do not try to reuse the capacitors once assembled and electrified, except only capacitors that are taken from a device for periodic inspection to measure their electrical characteristics. ② Capacitors may have been spontaneously recharged with time by a recovery voltage phenomenon. In this case, discharge the capacitors through a resistor of approximately 1kΩ before use. ③ If non-solid aluminum electrolytic capacitors have been stored at any conditions more than 35℃ and 75%RH for long storage periods of time more than the limits specified in the catalogs or product specifications, they may have high leakage current. In this case, make pre-conditioning by applying the rated voltage through a resistor of approximately 1kΩ. ④ Confirm the rated capacitance and voltage of capacitors before installation. ⑤ Confirm the polarity of capacitors before installation. ⑥ Do not try to use the capacitors that were dropped to the floor and so forth. ⑦ Do not deform the can case of a capacitor. ⑧ Make sure that the terminal spacing of a capacitor equals the holes spacing on the PC board before installing the capacitor. For radial lead type capacitors, some standard preformed lead types are also available. ⑨ When installing a snap-in type capacitor on the PC board, insert the terminals into the holes and press the capacitor down until the body is settled flush on the surface of the PC board (without the body standing off). ⑩ Do not apply excessive mechanical force to capacitors more than the limits prescribed in the catalogs or product specifications. Avoid excessive mechanical force while the capacitors are in the process of vacuum-picking, placing and positioning by automatic mounting machines or cutting the lead wires by automatic insertion machines. 2) Soldering and heat resistance ① For soldering using a soldering iron, consider the following conditions: • Soldering conditions (temperature and time) should be within the limits prescribed in the catalogs or product specifications. • If it is necessary to pre-form the terminal spacing of a capacitor to match the hole spacing on the PC board before assembly and soldering, do not make mechanical stress reach into the body of the capacitor but only the lead wires. • Do not touch the body of a capacitor with the hot tip of the soldering iron. ② For flow soldering, consider the following conditions: • Do not dip the body of a capacitor into a solder bath. Expose only the terminals to the melt solder with the PC board interposing between the solder and the body of the capacitor. Solder only the reverse side of the PC board where the body of the capacitor is not located. • Soldering conditions should be within the limits prescribed in the catalogs or product specifications. • Do not apply flux to any part of a capacitor other than the terminals. • Do not let any other component lean against nor come into contact with the capacitor while soldering. ③ For reflow soldering, consider the following conditions: • Soldering conditions (preheat, reflow temperature and time) should be within the limits prescribed in the catalogs or product specifications. • When using the infrared heater and setting its temperatures, adjust the heating levels taking into consideration that the color and materials of a capacitor vary in their infrared absorbance. • The allowable number of reflow passes is specified in the catalogs or product specifications. • When mounting a capacitor on the double-sided PC board, do not place any wiring pattern underneath the capacitor. • Please consult us about vapor phase soldering (VPS). ④ Do not try to reuse the capacitor that was removed from the PC board after soldering. ⑤ Only use chip type capacitors for reflow soldering. The other type capacitors are not designed for the reflow. 3) Handling after soldering After soldering the PC board, do not apply the following mechanical stress to the capacitor: ① Do not tilt, push down or twist the body of the capacitor. ② Do not grab the body of the capacitor to carry the assembly board. ③ Do not hit anything against the capacitor. When stacking the assembled boards, do not put any of the PC boards or other Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart Precautions and Guidelines (Aluminum Electrolytic Capacitors) components against the capacitor. ④ Do not drop the assembled board. 4) Cleaning assembly boards ① Do not clean capacitors with the following cleaning agents: • Halogenated solvents: cause capacitor failures due to corrosion. • Alkali system solvents: corrode (dissolve) the aluminum can case. • Terpene and petroleum system solvents: deteriorate the rubber seal materials. • Xylene and toluene: deteriorates the rubber seal materials as well. • Acetone: erases the markings printed on a capacitor. Where cleaning is necessary, use only solvent resistant type capacitors that have been assured for the cleaning within the specific cleaning conditions prescriber in the catalogs or product specifications. In particular, carefully set up the conditions for ultrasonic cleaning system. ② Where cleaning the solvent resistance type of aluminum electrolytic capacitors, confirm the following conditions: • Control the contamination (the conductivity, pH, specific gravity, water content, etc.) of the cleaning agents. • After the cleaning, do not leave the capacitors (assembly boards) in an environment of cleaning agent-rich or in a closed container. Sufficiently evaporate the residual cleaning agent from the assembly boards and the capacitors by forced hot air at temperatures less than the upper limit of category temperature range for more than 10 minutes. In general, aluminum electrolytic capacitors are sensitive to contamination of halogen ions (particularly to chlorine ions). Depending on the properties of the electrolyte and rubber seal materials used in a capacitor, the halogen ions lead up to catastrophic failures on the capacitor. Where the inside of a capacitor has been contaminated with more than a certain amount of halogen ions and the capacitor is in use, the corrosion reaction of aluminum occurs. The corrosion causes the capacitor to have a significant increase in leakage current with heat produced, open the pressure relief vent and become open circuit mode failure. Due to global environmental issues (greenhouse effects and other environmental destruction by depletion of the ozone layer), the conventional cleaning solvents of CFC 113, Trichloroethylene and 1,1,1-trichloroethylene were replaced by substitutes. The following are some substitute cleaning agents and allowable cleaning conditions: a) Fatty-alcohol cleaning agents Pine Alpha ST-100S (Arakawa Chemical) Clean Through 750H, 750K, 750L and 710M (Kao) Technocare FRW-14, 15, 16 and 17 (Momentive Performance Materials) [Compatible capacitor products] Terminal Shape Subject Series Surface Mount Type All Series Radial Lead Type All Series Snap-in Type All Series (Less and equal 100Vdc) [Cleaning conditions] Either of immersion or ultrasonic cleaning, for a maximum of 10 minutes and at a maximum liquid temperature of 60℃ is acceptable. Make sure that the markings on the capacitor are not rubbed against any other component or the PC board during cleaning. Note that shower cleaning affects the markings on the capacitor. b) HCFC (Freon 225) as Alternative CFCs AK225AES (Asahi Glass) [Cleaning conditions] Solvent resistant type capacitors, which were originally developed to intend to resist Freon TE or Freon TES, are also capable of withstanding any one of immersion, ultrasonic or vapor cleaning, for a maximum of 5 minutes (or 2 minutes for KRE series capacitors or 3 minutes for SRM series). However, this type of cleaning agent is not recommended to use, as the cleaning materials may be banned in near future in view of global environmental issues. c) IPA (Isopropyl Alcohol) Immersion cleaning with a maximum flux concentration of 2 wt% is acceptable. 5) Adhesives and coating materials ① Do not use any adhesive or coating materials containing halogenated solvents. ② Make sure of the following conditions before applying adhesive or coating materials to a capacitor, • No flux residue nor stain is left between the rubber seal of a capacitor and PC board. • Dry the capacitor to remove residual cleaning agents before applying adhesive and coating materials. Do not cover up the entire surface of the rubber seal of the capacitor with adhesives or coating materials. • Heating and curing conditions for adhesives and coating materials should be followed as prescribed in the catalogs or product specifications. • Covering up the entire surface of the rubber seal with resin mold materials will obstruct the normal diffusion of internal hydrogen gas from a capacitor and result in serious failures. Also, where the adhesive and coating materials contain a large amount of halogen ions, the halogen ions will contaminate the inside of the capacitor through the rubber seal materials, causing the capacitor to become a failure. • Depending on solvent materials that the adhesive or coating materials contains, note that the outer sleeve of a capacitor may lose a gloss or whiten in appearance. 6) Fumigation In exporting or importing electronic devices, they may be exposed to fumigation with halide such as methyl bromide. Where aluminum electrolytic capacitors are exposed to halide such as methyl bromide, the capacitors will be damaged with the corrosion reaction with halogen ions in the same way as cleaning agents. For the export and import, Nippon Chemi-Con considers using some packaging method and so forth so that fumigation is not required. For customers to export or import electronic devices, semi-assembly products or capacitor components, confirm if they will be exposed to fumigation and also consider final condition of packaging. (Note that either cardboard or vinyl package has a risk of fumigation gas penetration.) 3 Precautions during operation of devices 1) Never touch the terminals of a capacitor directly with bare hands. 2) Do not short-circuit between the capacitor terminals with anything conductive. Also, do not spill any conductive liquid such as acid or alkaline solution over a capacitor. 3) Confirm environmental conditions where the device will be placed. Do not use the devise in the following environmental conditions: ① Water or oil spatters, or high condensation environment. ② Direct sunlight. ③ Ozone, ultraviolet rays or radiation. ④ Toxic gases such as hydrogen sulfide, sulfuric acid, nitrous acid, chlorine and its compounds, bromine and its compounds and ammonium. ⑤ Severe vibration or mechanical shock conditions beyond the limits prescribed in the catalog or product specification. The standard vibration condition is applicable to JIS C 5101-4. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart Precautions and Guidelines (Aluminum Electrolytic Capacitors) 4 Maintenance inspections 1) For industrial use capacitors, make periodic inspections of the capacitors. Before the inspections, turn off the power supply of the device and discharge the electricity of the capacitors. Where checking it by a volt-ohm meter, confirm the polarity beforehand. Do not apply mechanical stress to the terminals of the capacitors during inspection. 2) Characteristics to be inspected ① Significant damage in appearance: vent opening, electrolyte leakage, etc. ② Electrical characteristics: Leakage current, capacitance, tanδ and other characteristics prescribed in the catalogs or product specifications. If finding anything abnormal. on the characteristics above, check the specifications of the capacitor and take appropriate actions such as replacement. 5 Capacitor venting 1) A capacitor with more than a certain case size has the pressure relief vent functioning to escape abnormal gas pressure increase. If gas expels from a venting capacitor, disconnect the power supply of the device or unplug the power supply cord. If not disconnecting the power supply, the device circuit may be damaged due to the short circuit failure of the capacitor or short-circuited with the liquid that the gas was condensed to. It may cause secondary damages such as device burnout in the worst case scenario. The gas that comes out of the open vent is vaporized electrolyte, not smoke. 2) The gas expelled from a venting capacitor is more than 100° C. Never expose your face to the capacitor. If your eyes are exposed to the gas or you inhale it, immediately flush your eyes and/or gargle with water. If the electrolyte comes in contact with the skin, wash with soap and water. 6 Storage 1) Do not store capacitors at high temperature or high humidity. Store the capacitors indoors at temperatures of 5 to 35℃ and humidities of less than 75%RH. In principle, aluminum electrolytic capacitors should be used within three years after production. 2) Keep capacitors packed in the original packaging material wherever possible. 3) Avoid the following storage environmental conditions: ① Water spattering, high temperatures, high humidity or condensation environment. ② Oil spattering or oil mist filled. ③ Salt water spattering or salt filled. ④ Acidic toxic gases such as hydrogen sulfide, sulfuric acid, nitrous acid, chlorine, bromine and methyl bromide filled. ⑤ Alkaline toxic gases such as ammonium filled. ⑥ Acid or alkaline solutions spattering. ⑦ Direct sunlight, ozone, ultraviolet rays or radiation. ⑧ Extreme vibration or shock loading. 4) JEDEC J-STD-020 is not applicable. 7 8 About AEC-Q200 The Automotive Electronics Council（AEC）was originally established by major American automotive related manufactures. Today, the committees are composed of representatives from the sustaining Members of manufacturing companies in automotive electrical components. It has standardized the criteria for stress test qualification and reliability tests for electronic components. AEC-Q200 is the reliability test standard for approval of passive components in Automotive applications. It specifies the test type, parameters and quantity, etc. for each component. The criteria of the reliability tests such as for our main products, Aluminum Electrolytic Capacitors are described in this standard. Pursuant to the customer's specific testing requirements, Chemi-Con submits the test results according to AEC-Q200 for Aluminum Electrolytic Capacitors used in automotive applications on request. An electronic component manufacturer cannot simply claim that their product is AEC-Q200 Qualified . It can be claimed Compliant , Capable , Available , etc., however each component must be tested per each users Qualification Test Plan in order to claim AEC-Q200 status. Please contact us for more information. 9 Response to the Substances of Concern 1) Nippon Chemi-Con aims for developing products that meet laws and regulations concerning substances of concern. （Some products may contain regulated substances for exempted application） Please contact us for more information about law-compliance status. 2) According to the content of REACH handbook (Guidance on requirements for substances in articles which is published on May 2008), our electronic components are articles without any intended release . Therefore they are not applicable for Registration for EU REACH Regulation Article 7 (1). Reference: Electrolytic Condenser Investigation Society Study of REACH Regulation in EU about Electrolytic Capacitor (publicized on 13 March 2008) 10 Catalogs Specifications in the catalogs are subject to change without notice. Test data shown in the catalogs are not assured as the whole performance values, but typical values. For more details, refer to JEITA RCR-2367D (March 2019) with the title of Safety Application Guide for fixed aluminum electrolytic capacitors for use in electronic equipment . Capacitor disposal Please consult with a local organization for the proper disposal of industrial waste. For incinerating capacitors, apply a high-temperature incineration (over 800℃). Incinerating them at temperatures lower than that may produce toxic gases such as chlorine. To prevent capacitors from explosion, punch holes in or sufficiently crush the can cases of the capacitors, then incinerate. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart ALUMINUM ELECTROLYTIC CAPACITORS RECOMMENDED SOLDERING CONDITIONS ◆SURFACE MOUNT TYPE AlchipTM MVA/MVE/MZS/MZL/MZR/MZJ/MZA/MVY/MZF/MZE/MZK/MLA/MLF/MLE/MLK/ MVL/MVJ/MXB/MHS/MVH/MHL/MHB/MHJ/MHK/MKB The following conditions are recommended for air convection and infrared reflow soldering on the SMD products onto a glass epoxy circuit boards by cream solder. The dimensions of the glass epoxy boards with resist are 90×50×0.8mm for D55 to KG5 case code SMD capacitors and 180×90×0.8mm for LH0 to MN0 case codes SMD capacitors. The temperatures shown are the surface temperature values on the top of the can and on the capacitor terminals. Reflow should be performed twice or less. (The only MHS series : 3times or less) Please ensure that the capacitor became cold enough to the room temperature (5 to 35℃) before the second reflow and the third reflow (The only MHS series) . Consult with us when performing reflow profile in IPC / JEDEC (J-STD-020) ●Recommended soldering heat conditions (Except for Conductive Polymer Aluminum Solid Capacitors) Peak temp. Peak Series 230 or 240 Max. period of time over 230℃ or 240℃ Temp (℃) 217 Max. period of time over 217℃ Preheat Time (sec.) ●Recommended Solder Land on PC Board Size code Voltage range (Vdc) 4 to 63V Preheat Time maintained Time maintained Peak temp. Reflow number above 217℃ above 230℃ MVA, MVE, MZS (Except 63V MZL, MZR, MZJ, D55 to F90 for MVH) MZA, MVY, MZF, 63V(MVH), 80V 150 to 180℃ MZE, MZK, MLA, 4 to 50V 120sec. max. MLF, MLE, MLK, H63 to JA0 63 to 100, 400V MVL, MVJ, MVH, 6.3 to 50V MHL, MHB, MHJ, KE0 to MN0 MHK, MXB, MKB 63 to 450V Series Size code Voltage range (Vdc) MHS KE0 to MN0 16 to 100V Preheat 150 to 180℃ 120sec. max. 90sec. max 60sec. max. 260℃max. 2 times or less 60sec. max. 40sec. max. 250℃max. 2 times or less 60sec. max. 30sec. max. 245℃max. 2 times or less 30sec. max. 20sec. max. 240℃max. 2 times or less 30sec. max. 20sec. max. 240℃max. 2 times or less 20sec. max. - 230℃max. 2 times or less Time maintained Time maintained Peak temp. Reflow number above 217℃ above 240℃ 70sec. max. 20sec. max. 245℃max. 3 times or less Terminal code : A Terminal code : G a 1.0 1.4 1.9 1.9 2.3 3.1 4.5 4.0 6.0 6.0 a b c 1.9 3.5 3.3 3.1 4.5 3.4 4.7 4.7 4.2 4.4 6.3 7.8 8.8 3.5 3.5 9.3 9.6 9.6 [mm] c b a Size code b : Solder land on PC board Location of capacitor ◆RADIAL LEAD AND SNAP-IN TYPE ● Recommended soldering heat conditions Flow soldering ：260±5℃ for 10±1 seconds Hand soldering ：380±10℃ for 3±0.5 seconds D55, D60, D61, D73 E55, E60, E61, E73 F55, F60, F73, F90 F61, F80 H63 HA0 JA0 KE0, KG5, KN0 LH0, LN0 MH0, MN0 b 2.6 3.0 3.5 3.5 4.5 4.2 4.4 5.7 6.9 7.9 c 1.6 1.6 1.6 1.6 1.6 2.2 2.2 2.5 2.5 2.5 ◆PRECAUTIONS FOR USERS Soldering method The capacitors of Alchip-series have no capability to withstand such dip or wave soldering as totally immerses components into a solder bath. Reflow soldering Reflow the capacitors within recommended reflow soldering conditions. Verify there is no temperature stress to the capacitors because the following differences might degrade capacitors electrically and mechanically. Please consult us if other reflow conditions are employed. 1.Location of components : Temperature increases at the edge of PC board more than the center. 2.Population of PC board : The lower the component population is, the more temperature rises. 3.Material of PC board : A ceramic made board needs more heat than a glass epoxy made board. The heat increase may cause damage to the capacitors. 4.Thickness of PC board : A thicker board needs more heat than a thinner board. The heat increase may damage the capacitors. 5.Size of PC board : A larger board needs more heat than a smaller board. The heat increase may damage the capacitors. 6.Solder thickness If very thin cream solder paste is to be used for SMD types, please consult with us. 7.Location of infrared ray lamps : IR reflow as well as hot plate reflow heats only on the reverse side of the PC board to lessen heat stress to the capacitors. 8.Vapor soldering not used. 8.Pleasephase consult us about(VPS) vaporisphase soldering (VPS). Rework of soldering Use a soldering iron for rework. Do not exceed an iron tip temperature of 380±10℃ and an exposure time of 3±0.5 seconds. Mechanical stress Do not use the capacitors for lifting the PC board and give stress to the capacitor. Avoid bending the PC board. This may damage the capacitors. Cleaning assembly board Immediately after solvent cleaning, remove residual solvent with an air knife for at least 10 minutes. If the solvent is insufficiently dry, the capacitors may corrode. Coating on assembly board 1.Before curing coating material, remove the cleaning solvents from the assembly board. 2.Before conformal coating, a chloride free pre-coat material is recommended to decrease the stress on the capacitors. Molding with resin Internal chemical reaction gradually produces gas in the capacitor; then, increasing internal pressure. If the end seal of the capacitor is completely coverd by resin the gas will be unable to escape causing a potentially dangerous situation. The chlorine contained resin will penetrate into the end seal, reach the inside element, and cause damage of the capacitor. Others Refer to PRECAUTIONS AND GUIDELINES. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart PART NUMBERING SYSTEM Product code guide (Surface mount type) (Example : MVA series, 25V-47µF,φ6.3×5.2L) Please refer to the following table Contents Code Series Code Type Code Tol.(%) Code Polar E MVA MVA No dummy terminal A ±20 M Bi-polar B MV(Bi-polar) MV- With dummy terminal G 3 5 Terminal plating material Code Sn-Bi G Sn S 7 8 9 10 11 12 13 14 15 16 17 18 MV A 2 5 0 A RA 4 7 0 M F 5 5 G Series code Voltage code Terminal code Taping・Tray code Capacitance code Taping type Reel dia. Application size Code φ(mm) φD(mm) Cap.(µF) Code 1.0 1R0 4 D 5.2 55 φD=4 to 18 4.7 4R7 5 E 5.7 60 10 100 6.3 F 5.8 61 47 470 8 H 6.3 63 100 101 10 J 7.0 73 470 471 12.5 K 7.7 80 1,000 102 16 L 8.7 90 18 M 10 A0 2 E Category Voltage(V) Code 4 4R0 6.3 6R3 10 100 25 250 100 101 250 251 4 Taping 1 6 Plastic Reel 380 Cardboard Reel 380 Tray - RA φD=4 to 18 DA (not φD=12.5） φD=12.5 to 18 TR Refer to product guide for taping and tray specifications. Capacitance tolerance Supplement code Size code φD(mm) Code L(mm) Code 13.5 E0 16 G5 16.5 H0 21.5 N0 *Refer to the appendix (Part number) for codes not listed here. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.2 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM Alchip MVA - Standard, 85℃ Upgrade! Series ・φ4 through φ18 case sizes are fully lined up ・Endurance : 2,000 hours at 85℃ ・Suitable to fit for downsized equipment ・Solvent resistant type except 100 to 450Vdc (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant MVA 105℃ MVE ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +85℃ 4 to 450Vdc (at 20℃, 120Hz) ±20% (M) Rated voltage (Vdc) 4 to 100V 160 to 450V D55 to JA0 I=0.01CV or 3μA, whichever is greater.(after 2 minutes) KE0 to MN0 I=0.03CV or 4μA, whichever is greater.(after 1 minute) I=0.04CV+100μA max.(after 1 minute) Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃) Dissipation Factor Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 400 & 450V (tanδ) D55 to JA0 0.42 0.35 0.30 0.26 0.16 0.14 0.12 0.12 0.12 tanδ (Max.) KE0 to MN0 0.38 0.34 0.30 0.26 0.22 0.18 0.14 0.10 0.20 0.25 When nominal capacitance exceeds 1,000μF, add 0.02 to the value above for each 1,000μF increase. (at 20℃, 120Hz) Low Temperature Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 400 & 450V Characteristics Z(-25℃)/Z(+20℃) 7 4 3 2 2 2 2 2 3 (Max. Impedance Ratio) D55 to JA0 Z(-40℃)/Z(+20℃) 17 10 8 6 4 3 3 3 4 Z(-25℃)/Z(+20℃) 5 4 3 2 2 2 2 2 3 6 KE0 to MN0 12 10 8 5 4 3 3 3 6 10 (at 120Hz) Z(-40℃)/Z(+20℃) Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours at 85℃. Size code D55 to JA0 D55 to JA0 KE0 to MN0 Rated voltage (Vdc) 4V & 6.3V 10 to 100V 6.3 to 450V Capacitance change ≦±30% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 85℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Size code D55 to JA0 D55 to JA0 KE0 to MN0 Rated voltage 4V & 6.3V 10 to 100V 6.3 to 450V Capacitance change ≦±30% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value ◆DIMENSIONS [mm] ●Terminal Code : G (Vibration resistant structure) ●Size code : F80 to MN0 Vent 0.3max. (Except F80 to HA0) φD±0.5 P C±0.2 B±0.2 φD±0.5 W 0.3max. L±0.3(Note) L±0.3 (Note) Note : L±0.5 for HA0 to MN0 A±0.2 Note : L±0.5 for HA0 to MN0 KE0 to HN0 EX) 25V1,000µF 7hA 47 16V 0V MVA 1000 25V 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 C B A L Size code D 5.2 4.3 4.3 5.1 4 D55 5.2 5.3 5.3 5.9 5 E55 6.3 5.2 6.6 6.6 7.2 F55 6.3 7.7 6.6 6.6 7.2 F80 8 10.0 8.3 8.3 9.0 HA0 10 10.0 10.3 10.3 11.0 JA0 12.5 13.5 13.0 13.0 13.7 KE0 12.5 16.0 13.0 13.0 13.7 KG5 16 16.5 17.0 17.0 18.0 LH0 16 21.5 17.0 17.0 18.0 LN0 18 16.5 19.0 19.0 20.0 MH0 18 21.5 19.0 19.0 20.0 MN0 P 1.0 1.4 1.9 1.9 3.1 4.5 4.2 4.2 6.5 6.5 6.5 6.5 ◆RATED RIPPLE CURRENT MULTIPLIERS Size code 18 E MV A AAA A AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0µF:1R0,100µF:101) Taping·Tray code Terminal code (A, G) Voltage code (ex. 6.3V:6R3,100V:101,450V:451) Series code Category W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 ・Frequency Multipliers D55 to JA0 ◆PART NUMBERING SYSTEM 1 A±0.2 : Dummy terminals ◆MARKING D55 to JA0 EX) 16V47µF W B±0.2 Vent (Except D55 to HA0) P C±0.2 ● Terminal Code : A ● Size code : D55 to MN0 KE0 to MN0 Capacitance(µF) Frequency(Hz) 1.0 2.2 to 10 22 to 1,500 4.7 10 to 68 100 to 1,000 2,200 to 10,000 120 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1k 1.50 1.30 1.05 1.75 1.50 1.30 1.05 10k 1.75 1.40 1.08 2.30 1.75 1.40 1.08 100k 1.80 1.50 1.08 2.50 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM Alchip - Standard, 85℃ MVASeries Upgrade! ◆STANDARD RATINGS WV (Vdc) 4 6.3 10 16 25 35 is not solvent resistant. Cap (µF) Size code tanδ Rated ripple current (mArms/ 85℃, 120Hz) Part No. 33 47 100 220 330 470 1,000 33 47 100 220 330 470 680 820 1,000 1,500 2,200 3,300 3,300 4,700 6,800 6,800 10,000 22 33 47 100 150 220 330 470 1,000 2,200 3,300 4,700 4,700 6,800 22 33 47 100 150 220 330 470 680 1,000 2,200 3,300 3,300 4,700 10 22 33 47 56 100 150 220 330 470 1,000 2,200 2,200 3,300 4.7 10 22 D55 D55 E55 F55 F80 F80 HA0 D55 D55 E55 F55 F80 HA0 HA0 HA0 JA0 JA0 KE0 KG5 LH0 LH0 LN0 MH0 MN0 D55 D55 E55 F55 F55 F80 HA0 HA0 JA0 KE0 LH0 LN0 MH0 MN0 D55 E55 E55 F55 F80 F80 HA0 HA0 JA0 KE0 LH0 LN0 MH0 MN0 D55 E55 E55 F55 F55 F80 HA0 HA0 HA0 JA0 KE0 LN0 MH0 MN0 D55 D55 E55 0.42 0.42 0.42 0.42 0.42 0.42 0.42 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.40 0.42 0.42 0.44 0.48 0.48 0.56 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.36 0.38 0.40 0.40 0.44 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.26 0.30 0.32 0.34 0.34 0.36 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.26 0.28 0.28 0.30 0.14 0.14 0.14 25 30 50 80 135 150 320 30 33 55 88 135 280 290 320 430 480 890 1,000 1,200 1,400 1,750 1,700 2,000 26 30 44 70 79 130 270 280 430 960 1,300 1,550 1,600 1,850 26 37 44 70 110 130 270 280 380 710 1,150 1,450 1,450 1,750 24 41 47 60 66 120 210 260 300 400 820 1,450 1,400 1,800 18 24 41 EMVA4R0ARA330MD55G EMVA4R0ARA470MD55G EMVA4R0ARA101ME55G EMVA4R0ARA221MF55G EMVA4R0□RA331MF80G EMVA4R0□RA471MF80G EMVA4R0□RA102MHA0G EMVA6R3ARA330MD55G EMVA6R3ARA470MD55G EMVA6R3ARA101ME55G EMVA6R3ARA221MF55G EMVA6R3□RA331MF80G EMVA6R3□RA471MHA0G EMVA6R3□RA681MHA0G EMVA6R3□RA821MHA0G EMVA6R3□RA102MJA0G EMVA6R3□RA152MJA0G EMVA6R3□RA222MKE0S EMVA6R3□RA332MKG5S EMVA6R3□RA332MLH0S EMVA6R3□RA472MLH0S EMVA6R3□RA682MLN0S EMVA6R3□RA682MMH0S EMVA6R3□RA103MMN0S EMVA100ARA220MD55G EMVA100ARA330MD55G EMVA100ARA470ME55G EMVA100ARA101MF55G EMVA100ARA151MF55G EMVA100□RA221MF80G EMVA100□RA331MHA0G EMVA100□RA471MHA0G EMVA100□RA102MJA0G EMVA100□RA222MKE0S EMVA100□RA332MLH0S EMVA100□RA472MLN0S EMVA100□RA472MMH0S EMVA100□RA682MMN0S EMVA160ARA220MD55G EMVA160ARA330ME55G EMVA160ARA470ME55G EMVA160ARA101MF55G EMVA160□RA151MF80G EMVA160□RA221MF80G EMVA160□RA331MHA0G EMVA160□RA471MHA0G EMVA160□RA681MJA0G EMVA160□RA102MKE0S EMVA160□RA222MLH0S EMVA160□RA332MLN0S EMVA160□RA332MMH0S EMVA160□RA472MMN0S EMVA250ARA100MD55G EMVA250ARA220ME55G EMVA250ARA330ME55G EMVA250ARA470MF55G EMVA250ARA560MF55G EMVA250□RA101MF80G EMVA250□RA151MHA0G EMVA250□RA221MHA0G EMVA250□RA331MHA0G EMVA250□RA471MJA0G EMVA250□RA102MKE0S EMVA250□RA222MLN0S EMVA250□RA222MMH0S EMVA250□RA332MMN0S EMVA350ARA4R7MD55G EMVA350ARA100MD55G EMVA350ARA220ME55G WV (Vdc) 35 50 63 100 160 200 250 400 450 Cap (µF) Size code tanδ Rated ripple current (mArms/ 85℃, 120Hz) Part No. 33 100 150 220 330 470 1,000 2,200 3.3 4.7 10 22 33 47 100 220 330 470 470 1,000 1,000 1.0 2.2 3.3 4.7 10 22 33 47 56 68 100 220 330 330 470 470 22 33 68 100 220 220 330 47 68 100 100 22 33 47 68 68 100 10 22 33 47 47 68 4.7 10 22 22 33 4.7 10 22 33 F55 F80 HA0 HA0 JA0 KE0 LH0 MN0 D55 D55 E55 F55 F80 F80 HA0 JA0 KE0 KG5 LH0 LN0 MN0 D55 D55 E55 E55 F55 F80 HA0 HA0 JA0 JA0 KE0 KE0 KG5 LH0 LH0 MH0 HA0 JA0 KE0 KE0 LN0 MH0 MN0 KG5 LH0 LN0 MH0 KE0 KG5 LH0 LN0 MH0 MN0 KE0 KG5 LH0 LN0 MH0 MN0 KE0 LH0 LN0 MH0 MN0 KE0 LH0 LN0 MN0 0.14 0.14 0.14 0.14 0.14 0.22 0.22 0.24 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.18 0.18 0.18 0.18 0.18 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.10 0.10 0.10 0.10 0.10 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 54 120 210 260 360 600 1,100 1,700 15 18 30 47 70 85 190 320 600 740 850 1,300 1,400 8.0 12 17 20 32 60 110 130 160 170 380 580 720 820 950 1,000 90 120 380 440 850 800 1,000 370 500 590 590 240 310 420 510 510 590 150 240 340 420 420 490 120 140 280 280 350 120 140 280 350 EMVA350ARA330MF55G EMVA350□RA101MF80G EMVA350□RA151MHA0G EMVA350□RA221MHA0G EMVA350□RA331MJA0G EMVA350□RA471MKE0S EMVA350□RA102MLH0S EMVA350□RA222MMN0S EMVA500ARA3R3MD55G EMVA500ARA4R7MD55G EMVA500ARA100ME55G EMVA500ARA220MF55G EMVA500□RA330MF80G EMVA500□RA470MF80G EMVA500□RA101MHA0G EMVA500□RA221MJA0G EMVA500□RA331MKE0S EMVA500□RA471MKG5S EMVA500□RA471MLH0S EMVA500□RA102MLN0S EMVA500□RA102MMN0S EMVA630ARA1R0MD55G EMVA630ARA2R2MD55G EMVA630ARA3R3ME55G EMVA630ARA4R7ME55G EMVA630ARA100MF55G EMVA630□RA220MF80G EMVA630□RA330MHA0G EMVA630□RA470MHA0G EMVA630□RA560MJA0G EMVA630□RA680MJA0G EMVA630□RA101MKE0S EMVA630□RA221MKE0S EMVA630□RA331MKG5S EMVA630□RA331MLH0S EMVA630□RA471MLH0S EMVA630□RA471MMH0S EMVA101□RA220MHA0G EMVA101□RA330MJA0G EMVA101□RA680MKE0S EMVA101□RA101MKE0S EMVA101□RA221MLN0S EMVA101□RA221MMH0S EMVA101□RA331MMN0S EMVA161□RA470MKG5S EMVA161□RA680MLH0S EMVA161□RA101MLN0S EMVA161□RA101MMH0S EMVA201□RA220MKE0S EMVA201□RA330MKG5S EMVA201□RA470MLH0S EMVA201□RA680MLN0S EMVA201□RA680MMH0S EMVA201□RA101MMN0S EMVA251□RA100MKE0S EMVA251□RA220MKG5S EMVA251□RA330MLH0S EMVA251□RA470MLN0S EMVA251□RA470MMH0S EMVA251□RA680MMN0S EMVA401□RA4R7MKE0S EMVA401□RA100MLH0S EMVA401□RA220MLN0S EMVA401□RA220MMH0S EMVA401□RA330MMN0S EMVA451□RA4R7MKE0S EMVA451□RA100MLH0S EMVA451□RA220MLN0S EMVA451□RA330MMN0S □ : Enter the appropriate terminal code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM Alchip MVE - Standard, 105℃ Upgrade! Series ・Endurance : 1,000 to 2,000 hours at 105℃ ・Case size range :φ4×5.2L to φ18×21.5L ・Solvent resistant type except 100 to 450Vdc (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. MVE Longer life MVL MVJ ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 6.3 to 450Vdc (at 20℃, 120Hz) ±20%(M) Rated voltage (Vdc) 6.3 to 100V 160 to 450V D55 to JA0 I=0.01CV or 3μA, whichever is greater (2 minutes) KE0 to MN0 I=0.03CV or 4μA, whichever is greater (1 minute) I=0.04CV+100μA (1minute) Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃) See STANDARD RATINGS (at 20℃, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 400 to 450V Z(-25℃)/Z(+20℃) 4 3 2 2 2 2 2 3 D55 to JA0 Z(-40℃)/Z(+20℃) 12 8 6 4 3 3 3 4 Z(-25℃)/Z(+20℃) 5 4 3 2 2 2 2 2 3 6 KE0 to MN0 Z(-40℃)/Z(+20℃) 10 8 6 4 3 3 3 3 6 10 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for the specified period of time at 105℃. Size code D55 to F80 HA0 to MN0 Time 1,000 hours 2,000 hours Capacitance change ≦±30% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦300% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours (500 hours for B55 to F80 size) at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Size code D55 to F80 HA0 to MN0 Capacitance change ≦±25% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] ●Size code : F80 to MN0 Vent 0.3max. (Except F80 to HA0) 0.3max. L±0.3 (Note) L±0.3 (Note) Note : L±0.5 for HA0 to MN0 A±0.2 Note : L±0.5 for HA0 to MN0 P C±0.2 W B±0.2 B±0.2 P C±0.2 φD±0.5 ●Terminal Code : G (Vibration resistant structure) ●Size code : D55 to MN0 Vent (Except D55 to HA0) W φD±0.5 ●Terminal Code : A A±0.2 : Dummy terminals ◆MARKING D55 to JA0 Ex)16V22µF ・Frequency Multipliers 0V MVE 22 16V Size code 1000 25V D55 to JA0 ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 P 1.0 1.4 1.9 1.9 3.1 4.5 4.2 4.2 6.5 6.5 6.5 6.5 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 ◆RATED RIPPLE CURRENT MULTIPLIERS KE0 to MN0 Ex)25V1,000µF 7hE C B A L Size code D 5.2 4.3 4.3 5.1 4 D55 5.2 5.3 5.3 5.9 5 E55 6.3 5.2 6.6 6.6 7.2 F55 6.3 7.7 6.6 6.6 7.2 F80 8 10.0 8.3 8.3 9.0 HA0 10 10.0 10.3 10.3 11.0 JA0 12.5 13.5 13.0 13.0 13.7 KE0 12.5 16.0 13.0 13.0 13.7 KG5 16 16.5 17.0 17.0 18.0 LH0 16 21.5 17.0 17.0 18.0 LN0 18 16.5 19.0 19.0 20.0 MH0 18 21.5 19.0 19.0 20.0 MN0 16 17 18 E MV E AAA A AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7µF:4R7,100µF:101) Taping·Tray code Terminal code (A, G) Voltage code (ex. 6.3V:6R3,100V:101,450V:451) Series code Category KE0 to MN0 Capacitance(µF) Frequency(Hz) 1.0 2.2 to 10 22 to 1,500 3.3 to 4.7 10 to 68 100 to 1,000 2,200 to 6,800 120 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1k 1.50 1.30 1.05 1.75 1.50 1.30 1.05 10k 1.75 1.40 1.08 2.30 1.75 1.40 1.08 100k 1.80 1.50 1.08 2.50 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip - Standard, 105℃ MVESeries Upgrade! ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 Cap (µF) 22 33 47 100 220 330 470 680 1,000 1,500 2,200 2,200 3,300 3,300 4,700 4,700 6,800 6,800 22 33 47 100 150 220 330 470 1,000 2,200 2,200 3,300 3,300 4,700 4,700 10 22 33 47 100 150 220 330 470 680 1,000 1,000 2,200 2,200 3,300 3,300 10 22 33 47 100 150 220 330 470 1,000 1,000 2,200 2,200 4.7 10 22 47 100 150 220 Size code tanδ D55 E55 E55 F55 F80 HA0 HA0 HA0 JA0 JA0 KE0 LH0 KG5 MH0 LN0 MH0 LN0 MN0 E55 E55 F55 F55 F80 F80 HA0 HA0 JA0 KG5 LH0 LH0 MH0 LN0 MN0 D55 E55 F55 F55 F55 F80 F80 HA0 HA0 JA0 KE0 LH0 LH0 MH0 LN0 MH0 E55 F55 F55 F55 F80 HA0 HA0 JA0 JA0 LH0 MH0 LN0 MN0 D55 E55 F55 F80 F80 HA0 JA0 0.30 0.30 0.30 0.30 0.45 0.40 0.45 0.45 0.40 0.45 0.40 0.40 0.42 0.42 0.44 0.44 0.48 0.48 0.24 0.24 0.24 0.30 0.35 0.35 0.35 0.35 0.35 0.36 0.36 0.38 0.38 0.40 0.40 0.20 0.20 0.20 0.20 0.26 0.28 0.28 0.28 0.28 0.28 0.30 0.30 0.32 0.32 0.34 0.34 0.16 0.16 0.16 0.16 0.18 0.18 0.18 0.16 0.18 0.26 0.26 0.28 0.28 0.14 0.14 0.14 0.16 0.16 0.16 0.16 is not solvent resistant. Rated ripple current (mArms/ 105℃, 120Hz) Part No. 22 34 38 69 120 290 320 340 410 550 680 840 850 1,000 1,200 1,200 1,200 1,350 30 34 48 69 100 120 290 320 410 750 850 1,000 1,100 1,300 1,350 17 30 45 48 69 100 120 290 320 470 550 650 950 1,000 1,200 1,200 27 44 50 60 100 240 320 450 490 820 880 1,250 1,300 16 27 44 80 100 260 375 EMVE6R3ARA220MD55G EMVE6R3ARA330ME55G EMVE6R3ARA470ME55G EMVE6R3ARA101MF55G EMVE6R3□RA221MF80G EMVE6R3□RA331MHA0G EMVE6R3□RA471MHA0G EMVE6R3□RA681MHA0G EMVE6R3□RA102MJA0G EMVE6R3□RA152MJA0G EMVE6R3□RA222MKE0S EMVE6R3□RA222MLH0S EMVE6R3□RA332MKG5S EMVE6R3□RA332MMH0S EMVE6R3□RA472MLN0S EMVE6R3□RA472MMH0S EMVE6R3□RA682MLN0S EMVE6R3□RA682MMN0S EMVE100ARA220ME55G EMVE100ARA330ME55G EMVE100ARA470MF55G EMVE100ARA101MF55G EMVE100□RA151MF80G EMVE100□RA221MF80G EMVE100□RA331MHA0G EMVE100□RA471MHA0G EMVE100□RA102MJA0G EMVE100□RA222MKG5S EMVE100□RA222MLH0S EMVE100□RA332MLH0S EMVE100□RA332MMH0S EMVE100□RA472MLN0S EMVE100□RA472MMN0S EMVE160ARA100MD55G EMVE160ARA220ME55G EMVE160ARA330MF55G EMVE160ARA470MF55G EMVE160ARA101MF55G EMVE160□RA151MF80G EMVE160□RA221MF80G EMVE160□RA331MHA0G EMVE160□RA471MHA0G EMVE160□RA681MJA0G EMVE160□RA102MKE0S EMVE160□RA102MLH0S EMVE160□RA222MLH0S EMVE160□RA222MMH0S EMVE160□RA332MLN0S EMVE160□RA332MMH0S EMVE250ARA100ME55G EMVE250ARA220MF55G EMVE250ARA330MF55G EMVE250ARA470MF55G EMVE250□RA101MF80G EMVE250□RA151MHA0G EMVE250□RA221MHA0G EMVE250□RA331MJA0G EMVE250□RA471MJA0G EMVE250□RA102MLH0S EMVE250□RA102MMH0S EMVE250□RA222MLN0S EMVE250□RA222MMN0S EMVE350ARA4R7MD55G EMVE350ARA100ME55G EMVE350ARA220MF55G EMVE350□RA470MF80G EMVE350□RA101MF80G EMVE350□RA151MHA0G EMVE350□RA221MJA0G WV (Vdc) 35 50 63 100 160 200 250 400 450 Cap (µF) 330 470 470 1,000 1,000 2,200 1.0 2.2 3.3 4.7 10 33 47 100 220 330 330 470 470 1,000 1.0 2.2 3.3 4.7 10 22 33 47 100 220 220 330 330 470 470 22 33 47 68 100 100 220 220 330 33 47 68 68 100 10 22 33 47 47 68 4.7 10 22 33 33 47 4.7 10 22 3.3 4.7 10 22 Size code tanδ JA0 KE0 LH0 LH0 MH0 MN0 D55 D55 D55 E55 F55 F80 F80 HA0 JA0 KE0 LH0 LH0 MH0 MN0 D55 D55 E55 F55 F55 F80 HA0 HA0 JA0 KE0 LH0 LH0 MH0 LN0 MH0 HA0 JA0 KE0 KE0 KE0 LH0 LN0 MH0 MN0 KE0 LH0 LN0 MH0 LN0 KE0 KG5 LH0 LN0 MH0 MN0 KE0 KG5 LH0 LN0 MH0 MN0 KG5 LH0 MN0 KE0 KG5 LH0 MN0 0.16 0.22 0.22 0.22 0.22 0.24 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 0.14 0.18 0.18 0.18 0.18 0.18 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Rated ripple current (mArms/ 105℃, 120Hz) Part No. 450 520 650 750 1,000 1,450 8.0 12 15 20 32 65 80 230 375 500 600 700 750 1,200 8.0 12 17 22 32 58 140 170 310 470 560 700 750 900 900 100 150 250 300 380 450 750 750 980 95 260 320 320 380 80 110 220 270 270 330 65 105 180 230 230 280 50 85 130 40 50 85 130 EMVE350□RA331MJA0G EMVE350□RA471MKE0S EMVE350□RA471MLH0S EMVE350□RA102MLH0S EMVE350□RA102MMH0S EMVE350□RA222MMN0S EMVE500ARA1R0MD55G EMVE500ARA2R2MD55G EMVE500ARA3R3MD55G EMVE500ARA4R7ME55G EMVE500ARA100MF55G EMVE500□RA330MF80G EMVE500□RA470MF80G EMVE500□RA101MHA0G EMVE500□RA221MJA0G EMVE500□RA331MKE0S EMVE500□RA331MLH0S EMVE500□RA471MLH0S EMVE500□RA471MMH0S EMVE500□RA102MMN0S EMVE630ARA1R0MD55G EMVE630ARA2R2MD55G EMVE630ARA3R3ME55G EMVE630ARA4R7MF55G EMVE630ARA100MF55G EMVE630□RA220MF80G EMVE630□RA330MHA0G EMVE630□RA470MHA0G EMVE630□RA101MJA0G EMVE630□RA221MKE0S EMVE630□RA221MLH0S EMVE630□RA331MLH0S EMVE630□RA331MMH0S EMVE630□RA471MLN0S EMVE630□RA471MMH0S EMVE101□RA220MHA0G EMVE101□RA330MJA0G EMVE101□RA470MKE0S EMVE101□RA680MKE0S EMVE101□RA101MKE0S EMVE101□RA101MLH0S EMVE101□RA221MLN0S EMVE101□RA221MMH0S EMVE101□RA331MMN0S EMVE161□RA330MKE0S EMVE161□RA470MLH0S EMVE161□RA680MLN0S EMVE161□RA680MMH0S EMVE161□RA101MLN0S EMVE201□RA100MKE0S EMVE201□RA220MKG5S EMVE201□RA330MLH0S EMVE201□RA470MLN0S EMVE201□RA470MMH0S EMVE201□RA680MMN0S EMVE251□RA4R7MKE0S EMVE251□RA100MKG5S EMVE251□RA220MLH0S EMVE251□RA330MLN0S EMVE251□RA330MMH0S EMVE251□RA470MMN0S EMVE401□RA4R7MKG5S EMVE401□RA100MLH0S EMVE401□RA220MMN0S EMVE451□RA3R3MKE0S EMVE451□RA4R7MKG5S EMVE451□RA100MLH0S EMVE451□RA220MMN0S □ : Enter the appropriate terminal code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MZS - Series ・Downsizing and Lower ESR, 2,000hours at 105℃ ・Rated voltage range : 25, 35V, Nominal capacitance range : 330 to 1,000μF ・Solvent resistant type(see PRECAUTIONS AND GUIDELINES) ・Vibration resistance structure ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. Low ESR, 105℃ MZS Higher capacitance MZR ◆SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life Surge Voltage Test Characteristics -55 to +105℃ 25, 35Vdc (at 20℃, 120Hz) ±20% (M) I=0.01CV or 3μA, whichever is greater. Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage (Vdc) 25V 35V tanδ(Max.) 0.14 0.12 (at 20℃, 120Hz) Rated voltage (Vdc) 25V 35V Z(-25℃)/Z(+20℃) 2 2 Z(-40℃)/Z(+20℃) 3 3 Z(-55℃)/Z(+20℃) 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours at 105℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charging with the specified surge voltage for 30±5 seconds through a protective resistor (as required for RC=0.1±0.05sec) and open-circuiting for 5.5 minutes at a room temperature of 15 to 35℃. Rated voltage (Vdc) 25 35 29 40 Surge voltage (Vdc) Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value (Caution) Surge Voltage Test intends to evaluate capacitors in durability of an exceptional excessive voltage under specific conditions.It does not imply long-term use at all. ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : HA0 and JA0 ● Size code : HA0 and JA0 0.3max. L±0.5 B±0.2 P C±0.2 φD±0.5 L±0.5 A±0.2 Size code HA0 JA0 W D 8 10 L A B C W 10.0 8.3 8.3 9.0 0.7 to 1.1 10.0 10.3 10.3 11.0 0.7 to 1.1 P 3.1 4.5 P C±0.2 Vent for JA0 W B±0.2 φD±0.5 Vent for JA0 0.3max. A±0.2 : Dummy terminals ◆MARKING EX) 25V1,000µF 7Y 1000 EZS ● Rated voltage symbol Rated voltage (Vdc) Symbol 25 E 35 V Applying voltage over the rated voltages causes the capacitors to have short lifetime. Besides, applying voltage over the specified surge voltages may cause to have short circuit failure. A protection circuit should be used if applied voltage will exceed the rated voltages. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip - Low ESR, 105℃ MZSSeries ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E MZ S AAA A RA AAA M AAA G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 470µF:471, 1,000µF:102) Taping code Terminal code (A, G) Voltage code (ex. 35V:350) Series code Category Please refer to "Product code guide (surface mount type)" ◆STANDARD RATINGS WV (Vdc) 25 35 Cap (µF) Size code tanδ ESR (Ω max./20℃, 100kHz) Rated ripple current (mArms/105℃, 100kHz) Part No. 470 560 820 1,000 330 410 470 560 680 HA0 HA0 JA0 JA0 HA0 HA0 HA0 JA0 JA0 0.14 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.08 0.08 0.06 0.06 0.08 0.08 0.08 0.06 0.06 850 850 1,190 1,190 850 850 850 1,190 1,190 EMZS250□RA471MHA0G EMZS250□RA561MHA0G EMZS250□RA821MJA0G EMZS250□RA102MJA0G EMZS350□RA331MHA0G EMZS350□RA411MHA0G EMZS350□RA471MHA0G EMZS350□RA561MJA0G EMZS350□RA681MJA0G □ : Enter the appropriate terminal code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 330 to 560 680 to 1,000 120 0.50 0.60 1k 0.85 0.87 10k 0.94 0.95 100k 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MZL - Series ・Low ESR, 5,000hours at 105℃ ・Rated voltage range : 6.3 to 50V, Nominal capacitance range : 100 to 1,500μF ・Solvent resistant type(see PRECAUTIONS AND GUIDELINES) ・Vibration resistance structure ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. Low ESR, 105℃ MZL Longer life MZA/MZR ◆SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life Surge Voltage Test Characteristics -55 to +105℃ 6.3 to 50Vdc (at 20℃, 120Hz) ±20% (M) I=0.01CV or 3μA, whichever is greater. Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tanδ(Max.) 0.26 0.19 0.16 0.14 0.12 0.10 (at 20℃, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V Z(-25℃)/Z(+20℃) 2 2 2 2 2 2 Z(-40℃)/Z(+20℃) 3 3 3 3 3 3 Z(-55℃)/Z(+20℃) 4 4 4 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 hours at 105℃. Capacitance change ≦±35% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charging with the specified surge voltage for 30±5 seconds through a protective resistor (as required for RC=0.1±0.05sec) and open-circuiting for 5.5 minutes at a room temperature of 15 to 35℃. Rated voltage (Vdc) 6.3 10 16 25 35 50 Surge voltage (Vdc) 7.2 12 18 29 40 58 Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value (Caution) Surge Voltage Test intends to evaluate capacitors in durability of an exceptional excessive voltage under specific conditions.It does not imply long-term use at all. ◆DIMENSIONS [mm] ● Terminal Code : A 0.3max. L±0.5 L A B C W 10.0 8.3 8.3 9.0 0.7 to 1.1 10.0 10.3 10.3 11.0 0.7 to 1.1 P 3.1 4.5 P C±0.2 B±0.2 φD±0.5 P C±0.2 D 8 10 A±0.2 L±0.5 A±0.2 Size code HA0 JA0 W 0.3max. Vent for JA0 W B±0.2 φD±0.5 Vent for JA0 ● Terminal Code : G(Vibration resistant structure) : Dummy terminals ◆MARKING EX) 35V560µF nc 560 VZL ● Rated voltage symbol Rated voltage (Vdc) Symbol 6.3 j 10 A 16 C 25 E 35 V 50 H Applying voltage over the rated voltages causes the capacitors to have short lifetime. Besides, applying voltage over the specified surge voltages may cause to have short circuit failure. A protection circuit should be used if applied voltage will exceed the rated voltages. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip - Low ESR, 105℃ MZLSeries ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E MZ L AAA A RA AAA M AAA G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 220µF:221, 1,000µF:102) Taping code Terminal code (A, G) Voltage code (ex. 6.3V:6R3, 10V:100, 35V:350) Series code Category Please refer to "Product code guide (surface mount type)" ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 50 Cap (µF) Size code tanδ ESR (Ω max./20℃, 100kHz) Rated ripple current (mArms/105℃, 100kHz) Part No. 470 1,000 1,500 330 470 680 1,000 330 470 680 220 330 470 470 820 100 220 330 330 560 100 220 HA0 HA0 JA0 HA0 HA0 HA0 JA0 HA0 HA0 JA0 HA0 HA0 HA0 JA0 JA0 HA0 HA0 HA0 JA0 JA0 HA0 JA0 0.26 0.26 0.26 0.19 0.19 0.19 0.19 0.16 0.16 0.16 0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.10 0.10 0.16 0.16 0.08 0.16 0.16 0.16 0.08 0.16 0.16 0.08 0.16 0.16 0.08 0.08 0.06 0.16 0.16 0.08 0.08 0.06 0.34 0.18 600 600 850 600 600 600 850 600 600 850 600 600 850 850 1,190 600 600 850 850 1,190 350 670 EMZL6R3□RA471MHA0G EMZL6R3□RA102MHA0G EMZL6R3□RA152MJA0G EMZL100□RA331MHA0G EMZL100□RA471MHA0G EMZL100□RA681MHA0G EMZL100□RA102MJA0G EMZL160□RA331MHA0G EMZL160□RA471MHA0G EMZL160□RA681MJA0G EMZL250□RA221MHA0G EMZL250□RA331MHA0G EMZL250□RA471MHA0G EMZL250□RA471MJA0G EMZL250□RA821MJA0G EMZL350□RA101MHA0G EMZL350□RA221MHA0G EMZL350□RA331MHA0G EMZL350□RA331MJA0G EMZL350□RA561MJA0G EMZL500□RA101MHA0G EMZL500□RA221MJA0G □ : Enter the appropriate terminal code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 100 220 to 560 680 to 1,500 120 0.40 0.50 0.60 1k 0.75 0.85 0.87 10k 0.90 0.94 0.95 100k 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MZR - Low ESR, 105℃ Upgrade! Series ・Downsizing and Lower ESR, 2,000hours at 105℃ ・Rated voltage range : 6.3 to 50V, Nominal capacitance range : 22 to 2,200μF ・Solvent resistant type(see PRECAUTIONS AND GUIDELINES) ・Vibration resistance structure ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. MZR Downsized MZJ ◆SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life Surge Voltage Test Characteristics -55 to +105℃ 6.3 to 50Vdc (at 20℃, 120Hz) ±20% (M) I=0.01CV or 3μA, whichever is greater. Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tanδ(Max.) 0.26 0.19 0.16 0.14 0.12 0.10 (at 20℃, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V Z(-25℃)/Z(+20℃) 2 2 2 2 2 2 Z(-40℃)/Z(+20℃) 3 3 3 3 3 3 Z(-55℃)/Z(+20℃) 4 4 4 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours at 105℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charging with the specified surge voltage for 30±5 seconds through a protective resistor (as required for RC=0.1±0.05sec) and open-circuiting for 5.5 minutes at a room temperature of 15 to 35℃. Rated voltage (Vdc) 6.3 10 16 25 35 50 Surge voltage (Vdc) 7.2 12 18 29 40 58 Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value (Caution) Surge Voltage Test intends to evaluate capacitors in durability of an exceptional excessive voltage under specific conditions.It does not imply long-term use at all. ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : E61 to JA0 ● Size code : F61 to JA0 A±0.2 B±0.2 φD±0.5 P C±0.2 0.3max. L±0.3 (Note) P C±0.2 Vent for JA0 W B±0.2 φD±0.5 Vent for JA0 W 0.3max. Size code E61 F61 F80 HA0 JA0 D 5 6.3 6.3 8 10 A B C L 5.8 5.3 5.3 5.9 5.8 6.6 6.6 7.2 7.7 6.6 6.6 7.2 10.0 8.3 8.3 9.0 10.0 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.4 1.9 1.9 3.1 4.5 A±0.2 L±0.3 (Note) Note : L±0.5 for HA0 and JA0 Note : L±0.5 for HA0 and JA0 : Dummy terminals ◆MARKING EX) 35V330µF 3Q 330 VZR ● Rated voltage symbol Rated voltage (Vdc) Symbol 6.3 j 10 A 16 C 25 E 35 V 50 H Applying voltage over the rated voltages causes the capacitors to have short lifetime. Besides, applying voltage over the specified surge voltages may cause to have short circuit failure. A protection circuit should be used if applied voltage will exceed the rated voltages. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS MZRSeries Upgrade! TM AIchip Low ESR, 105℃ - ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E MZ R AAA A RA AAA M AAA G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 220µF:221, 470µF:471) Taping code Terminal code (A, G) Voltage code (ex. 6.3V:6R3, 10V:100, 35V:350) Series code Category Please refer to "Product code guide (surface mount type)" ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 50 Cap (µF) Size code tanδ ESR (Ω max./20℃, 100kHz) Rated ripple current (mArms/105℃, 100kHz) Part No. 220 330 680 1,500 2,200 150 220 470 1,000 1,500 100 220 330 680 1,000 68 100 220 470 820 47 100 150 330 560 22 47 100 220 330 E61 F61 F80 HA0 JA0 E61 F61 F80 HA0 JA0 E61 F61 F80 HA0 JA0 E61 F61 F80 HA0 JA0 E61 F61 F80 HA0 JA0 E61 F61 F80 HA0 JA0 0.26 0.26 0.26 0.26 0.26 0.19 0.19 0.19 0.19 0.19 0.16 0.16 0.16 0.16 0.16 0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.10 0.10 0.10 0.10 0.10 0.36 0.26 0.16 0.08 0.06 0.36 0.26 0.16 0.08 0.06 0.36 0.26 0.16 0.08 0.06 0.36 0.26 0.16 0.08 0.06 0.36 0.26 0.16 0.08 0.06 0.88 0.68 0.34 0.18 0.12 240 300 600 850 1,190 240 300 600 850 1,190 240 300 600 850 1,190 240 300 600 850 1,190 240 300 600 850 1,190 165 195 350 670 900 EMZR6R3ARA221ME61G EMZR6R3□RA331MF61G EMZR6R3□RA681MF80G EMZR6R3□RA152MHA0G EMZR6R3□RA222MJA0G EMZR100ARA151ME61G EMZR100□RA221MF61G EMZR100□RA471MF80G EMZR100□RA102MHA0G EMZR100□RA152MJA0G EMZR160ARA101ME61G EMZR160□RA221MF61G EMZR160□RA331MF80G EMZR160□RA681MHA0G EMZR160□RA102MJA0G EMZR250ARA680ME61G EMZR250□RA101MF61G EMZR250□RA221MF80G EMZR250□RA471MHA0G EMZR250□RA821MJA0G EMZR350ARA470ME61G EMZR350□RA101MF61G EMZR350□RA151MF80G EMZR350□RA331MHA0G EMZR350□RA561MJA0G EMZR500ARA220ME61G EMZR500□RA470MF61G EMZR500□RA101MF80G EMZR500□RA221MHA0G EMZR500□RA331MJA0G □ : Enter the appropriate terminal code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 22 to 150 220 to 560 680 to 2,200 120 0.40 0.50 0.60 1k 0.75 0.85 0.87 10k 0.90 0.94 0.95 100k 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MZJ - Low ESR, 105℃ Upgrade! Series ・Lower ESR, 2,000 to 5,000 hours at 105℃ ・Rated voltage range : 6.3 to 50V ・Nominal capacitance range : 22 to 10,000µF ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・Vibration resistant structure ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. MZJ Lower ESR MZA ◆SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life Surge Voltage Test Characteristics -55 to +105℃ 6.3 to 50Vdc (at 20℃, 120Hz) ±20% (M) I=0.01CV or 3μA, whichever is greater. Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tanδ(Max.) 0.26 0.19 0.16 0.14 0.12 0.12 (at 20℃, 120Hz) When nominal capacitance exceeds 1,000μF, add 0.02 to the value above for each 1,000μF increase. Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V Z(-25℃)/Z(+20℃) 2 2 2 2 2 2 Z(-40℃)/Z(+20℃) 3 3 3 3 3 3 Z(-55℃)/Z(+20℃) 4 4 4 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for specified time at 105℃. Time E61 to JA0：2,000 hours KE0 to LN0：5,000 hours Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charging with the specified surge voltage for 30±5 seconds through a protective resistor (as required for RC=0.1±0.05sec) and open-circuiting for 5.5 minutes at a room temperature of 15 to 35℃. Rated voltage (Vdc) 6.3 10 16 25 35 50 Surge voltage (Vdc) 7.2 12 18 29 40 58 Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value (Caution) Surge Voltage Test intends to evaluate capacitors in durability of an exceptional excessive voltage under specific conditions.It does not imply long-term use at all. ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : E61 to LN0 ● Size code : F61 to LN0 Vent 0.3max. L±0.3 (Note) A±0.2 A±0.2 L±0.3 (Note) Note : L±0.5 for HA0 to LN0 Note : L±0.5 for HA0 to LN0 9G 220 VZJ C 5.9 7.2 7.2 9.0 11.0 13.7 13.7 18.0 18.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 P 1.4 1.9 1.9 3.1 4.5 4.2 4.2 6.5 6.5 KE0 to LN0 EX) 16V1,800µF ● Rated voltage symbol (E61 to JA0) Rated voltage (Vdc) Symbol Size code φD L A B E61 5 5.8 5.3 5.3 6.3 5.8 6.6 6.6 F61 6.3 7.7 6.6 6.6 F80 8 10.0 8.3 8.3 HA0 10 10.0 10.3 10.3 JA0 KE0 12.5 13.5 13.0 13.0 KG5 12.5 16.0 13.0 13.0 LH0 16 16.5 17.0 17.0 LN0 16 21.5 17.0 17.0 : Dummy terminals ◆MARKING EX) 35V220µF P C±0.2 φD±0.5 P C±0.2 B±0.2 φD±0.5 (Except F61 to HA0) W (Except E61 to HA0) W 0.3max. B±0.2 Vent 6.3 j 10 A 16 C 25 E 35 V FB MZJ 1800 16V Applying voltage over the rated voltages causes the capacitors to have short lifetime. Besides, applying voltage over the specified surge voltages may cause to have short circuit failure. A protection circuit should be used if applied voltage will exceed the rated voltages. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS MZJSeries Upgrade! TM AIchip Low ESR, 105℃ - ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 E MZ J AAA A RA AAA M AAA 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 22µF:220, 1,000µF:102) Taping code Terminal code (A, G) Voltage code (ex. 6.3V:6R3, 10V:100, 50V:500) Series code Category Please refer to "Product code guide (surface mount type)" ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (µF) Size code 100 220 330 1,000 1,500 1,800 3,300 3,900 6,800 10,000 150 680 1,000 1,200 2,200 2,700 4,700 6,800 47 100 150 220 470 680 820 1,800 2,200 3,900 5,600 22 E61 F61 F80 HA0 JA0 JA0 KE0 KG5 LH0 LN0 F61 HA0 JA0 JA0 KE0 KG5 LH0 LN0 E61 F61 F80 F80 HA0 JA0 JA0 KE0 KG5 LH0 LN0 E61 Rated ripple ESR current (Ω max./20℃, (mArms/105℃, 100kHz) 100kHz) 0.36 0.26 0.16 0.08 0.06 0.06 0.051 0.044 0.035 0.026 0.26 0.08 0.06 0.06 0.051 0.044 0.035 0.026 0.36 0.26 0.16 0.16 0.08 0.06 0.06 0.051 0.044 0.035 0.026 0.36 240 300 600 850 1,190 1,190 1,210 1,420 1,850 2,330 300 850 1,190 1,190 1,210 1,420 1,850 2,330 240 300 600 600 850 1,190 1,190 1,210 1,420 1,850 2,330 240 Part No. EMZJ6R3ARA101ME61G EMZJ6R3□RA221MF61G EMZJ6R3□RA331MF80G EMZJ6R3□RA102MHA0G EMZJ6R3□RA152MJA0G EMZJ6R3□RA182MJA0G EMZJ6R3□RA332MKE0S EMZJ6R3□RA392MKG5S EMZJ6R3□RA682MLH0S EMZJ6R3□RA103MLN0S EMZJ100□RA151MF61G EMZJ100□RA681MHA0G EMZJ100□RA102MJA0G EMZJ100□RA122MJA0G EMZJ100□RA222MKE0S EMZJ100□RA272MKG5S EMZJ100□RA472MLH0S EMZJ100□RA682MLN0S EMZJ160ARA470ME61G EMZJ160□RA101MF61G EMZJ160□RA151MF80G EMZJ160□RA221MF80G EMZJ160□RA471MHA0G EMZJ160□RA681MJA0G EMZJ160□RA821MJA0G EMZJ160□RA182MKE0S EMZJ160□RA222MKG5S EMZJ160□RA392MLH0S EMZJ160□RA562MLN0S EMZJ250ARA220ME61G WV (Vdc) 25 35 50 Cap (µF) Size code 33 33 47 68 100 330 470 560 1,200 1,500 2,200 3,900 22 33 47 68 100 100 150 220 330 390 680 820 1,500 2,700 390 470 1,000 1,200 E61 F61 F61 F61 F80 HA0 JA0 JA0 KE0 KG5 LH0 LN0 E61 F61 F61 F61 F80 HA0 HA0 HA0 JA0 JA0 KE0 KG5 LH0 LN0 KE0 KG5 LH0 LN0 Rated ripple ESR current (Ω max./20℃, (mArms/105℃, 100kHz) 100kHz) 0.36 0.26 0.26 0.26 0.16 0.08 0.06 0.06 0.051 0.044 0.035 0.026 0.36 0.26 0.26 0.26 0.16 0.08 0.08 0.08 0.06 0.06 0.051 0.044 0.035 0.026 0.105 0.092 0.073 0.050 240 300 300 300 600 850 1,190 1,190 1,210 1,420 1,850 2,330 240 300 300 300 600 850 850 850 1,190 1,190 1,210 1,420 1,850 2,330 930 1,120 1,660 1,920 Part No. EMZJ250ARA330ME61G EMZJ250□RA330MF61G EMZJ250□RA470MF61G EMZJ250□RA680MF61G EMZJ250□RA101MF80G EMZJ250□RA331MHA0G EMZJ250□RA471MJA0G EMZJ250□RA561MJA0G EMZJ250□RA122MKE0S EMZJ250□RA152MKG5S EMZJ250□RA222MLH0S EMZJ250□RA392MLN0S EMZJ350ARA220ME61G EMZJ350□RA330MF61G EMZJ350□RA470MF61G EMZJ350□RA680MF61G EMZJ350□RA101MF80G EMZJ350□RA101MHA0G EMZJ350□RA151MHA0G EMZJ350□RA221MHA0G EMZJ350□RA331MJA0G EMZJ350□RA391MJA0G EMZJ350□RA681MKE0S EMZJ350□RA821MKG5S EMZJ350□RA152MLH0S EMZJ350□RA272MLN0S EMZJ500□RA391MKE0S EMZJ500□RA471MKG5S EMZJ500□RA102MLH0S EMZJ500□RA122MLN0S □ : Enter the appropriate terminal code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Size code E61 to JA0 KE0 to LN0 Capacitance(µF) Frequency(Hz) 22 to 150 220 to 560 680 to 1,800 390 to 470 680 to 1,800 2,200 to 3,300 3,900 to 10,000 120 0.40 0.50 0.60 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MZA - Low impedance, 105℃ Upgrade! Series MZA ・Endurance : 2,000 to 5,000 hours at 105℃ ・Low impedance ・Solvent resistant type(see PRECAUTIONS AND GUIDELINES) ・Vibration resistant structure ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. Lower Z MVY ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105℃ 6.3 to 100Vdc (at 20℃, 120Hz) ±20%(M) I=0.01CV or 3μA, whichever is greater Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V D61 to JA0 0.26 0.19 0.16 0.14 0.12 0.10 0.08 0.08 tanδ(Max.) KE0 to MN0 0.16 0.14 0.12 0.12 0.10 0.10 When nominal capacitance exceeds 1,000μF, add 0.02 to the value above for each 1,000μF increase. (at 20℃, 120Hz) Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V Z(-25℃)/Z(+20℃) 2 2 2 2 2 2 2 2 2 Z(-40℃)/Z(+20℃) 3 3 3 3 3 3 3 3 3 Z(-55℃)/Z(+20℃) 4 4 4 3 3 3 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for specified time at 105℃. D61 to JA0 : 2,000 hours Time KE0 to MN0 : 5,000 hours Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. impedance Ratio) Endurance ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : D61 to MN0 ● Size code : F61 to MN0 φD±0.5 P C±0.2 B±0.2 φD±0.5 W 0.3max. L±0.3 (Note) W 0.3max. P C±0.2 Vent (Except F61 to HA0) B±0.2 Vent (Except D61 to HA0) A±0.2 L±0.3 (Note) Note : L±0.5 for HA0 to MN0 A±0.2 Note : L±0.5 for HA0 to MN0 : Dummy terminals C B A L Size code D 5.8 4.3 4.3 5.1 4 D61 5.8 5.3 5.3 5.9 5 E61 6.3 5.8 6.6 6.6 7.2 F61 6.3 7.7 6.6 6.6 7.2 F80 8 10.0 8.3 8.3 9.0 HA0 10 10.0 10.3 10.3 11.0 JA0 12.5 13.5 13.0 13.0 13.7 KE0 12.5 16.0 13.0 13.0 13.7 KG5 16 16.5 17.0 17.0 18.0 LH0 16 21.5 17.0 17.0 18.0 LN0 18 16.5 19.0 19.0 20.0 MH0 18 21.5 19.0 19.0 20.0 MN0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 P 1.0 1.4 1.9 1.9 3.1 4.5 4.2 4.2 6.5 6.5 6.5 6.5 50 H 80 K ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E MZA AAA A DA AAA M AAA G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7µF:4R7,10µF:100) Taping·Tray code Terminal code (A, G) Voltage code (ex. 6.3V:6R3,10V:100,50V:500) Series code Category Please refer to "Product code guide (surface mount type)" ◆MARKING KE0 to MN0 EX) 25V1,000µF D61 to JA0 EX) 16V220µF 0V MZA 2j 220 CZA 1000 25V ●Rated voltage symbol (D61 to JA0) Rated voltage (Vdc) Symbol 6.3 j 10 A 16 C 25 E 35 V 63 J Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip - Low impedance, 105℃ MZASeries Upgrade! ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 Cap (µF) Size code 22 D61 47 D61 47 E61 100 E61 100 F61 220 F61 330 F80 470 HA0 1,000 HA0 1,500 JA0 22 D61 33 D61 33 E61 220 F80 330 HA0 470 HA0 680 HA0 1,000 JA0 10 D61 22 D61 22 E61 47 E61 47 F61 100 F61 220 F80 330 HA0 470 HA0 680 JA0 10 D61 22 E61 33 E61 33 F61 47 F61 100 F80 220 HA0 330 HA0 470 JA0 1,000 KE0 1,300 KG5 1,800 LH0 2,400 MH0 3,000 LN0 3,900 MN0 4.7 D61 10 D61 10 E61 22 E61 33 F61 47 F61 100 F80 100 HA0 220 HA0 Impedance Rated ripple ( Ω max./ current 100kHz) (mArms/ 20℃ -40℃ 105℃ ,100kHz) 1.35 1.35 0.70 0.70 0.36 0.36 0.34 0.16 0.16 0.08 1.35 1.35 0.70 0.34 0.16 0.16 0.16 0.08 1.35 1.35 0.70 0.70 0.36 0.36 0.34 0.16 0.16 0.08 1.35 0.70 0.70 0.36 0.36 0.34 0.16 0.16 0.08 0.060 0.056 0.047 0.045 0.034 0.032 1.35 1.35 0.70 0.70 0.36 0.36 0.34 0.16 0.16 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 0.30 0.28 0.24 0.23 0.17 0.16 – – – – – – – – – 90 90 160 160 240 240 280 600 600 850 90 90 160 280 600 600 600 850 90 90 160 160 240 240 280 600 600 850 90 160 160 240 240 280 600 600 850 1,320 1,470 1,820 2,060 2,400 2,640 90 90 160 160 240 240 280 600 600 Part No. EMZA6R3ARA220MD61G EMZA6R3ARA470MD61G EMZA6R3ARA470ME61G EMZA6R3ARA101ME61G EMZA6R3 □ RA101MF61G EMZA6R3 □ RA221MF61G EMZA6R3 □ RA331MF80G EMZA6R3 □ RA471MHA0G EMZA6R3 □ RA102MHA0G EMZA6R3 □ RA152MJA0G EMZA100ARA220MD61G EMZA100ARA330MD61G EMZA100ARA330ME61G EMZA100 □ RA221MF80G EMZA100 □ RA331MHA0G EMZA100 □ RA471MHA0G EMZA100 □ RA681MHA0G EMZA100 □ RA102MJA0G EMZA160ARA100MD61G EMZA160ARA220MD61G EMZA160ARA220ME61G EMZA160ARA470ME61G EMZA160 □ RA470MF61G EMZA160 □ RA101MF61G EMZA160 □ RA221MF80G EMZA160 □ RA331MHA0G EMZA160 □ RA471MHA0G EMZA160 □ RA681MJA0G EMZA250ARA100MD61G EMZA250ARA220ME61G EMZA250ARA330ME61G EMZA250 □ RA330MF61G EMZA250 □ RA470MF61G EMZA250 □ RA101MF80G EMZA250 □ RA221MHA0G EMZA250 □ RA331MHA0G EMZA250 □ RA471MJA0G EMZA250 □ RA102MKE0S EMZA250 □ RA132MKG5S EMZA250 □ RA182MLH0S EMZA250 □ RA242MMH0S EMZA250 □ RA302MLN0S EMZA250 □ RA392MMN0S EMZA350ARA4R7MD61G EMZA350ARA100MD61G EMZA350ARA100ME61G EMZA350ARA220ME61G EMZA350 □ RA330MF61G EMZA350 □ RA470MF61G EMZA350 □ RA101MF80G EMZA350 □ RA101MHA0G EMZA350 □ RA221MHA0G WV (Vdc) Cap (µF) 330 620 820 35 1,200 1,600 1,800 2,400 4.7 10 10 22 33 47 100 50 220 330 430 620 820 1,000 1,300 4.7 10 22 33 47 68 63 100 240 300 430 560 680 910 3.3 4.7 10 22 33 47 80 150 220 330 430 470 680 110 130 200 100 270 330 430 Size code JA0 KE0 KG5 LH0 MH0 LN0 MN0 D61 E61 F61 F61 F80 F80 HA0 JA0 KE0 KG5 LH0 MH0 LN0 MN0 E61 F61 F80 HA0 HA0 HA0 JA0 KE0 KG5 LH0 MH0 LN0 MN0 E61 F61 F80 HA0 HA0 JA0 KE0 KG5 LH0 MH0 LN0 MN0 KE0 KG5 LH0 MH0 LN0 MN0 Impedance Rated ripple ( Ω max./ current 100kHz) (mArms/ 20℃ -40℃ 105℃ ,100kHz) 0.08 0.060 0.056 0.047 0.045 0.034 0.032 2.9 1.52 0.88 0.88 0.68 0.68 0.34 0.18 0.11 0.10 0.087 0.087 0.050 0.050 4.8 2.2 2.1 0.70 0.70 0.70 0.45 0.19 0.17 0.15 0.12 0.085 0.070 5.0 3.0 2.4 1.3 1.3 0.70 0.22 0.17 0.15 0.12 0.085 0.070 0.28 0.21 0.18 0.15 0.11 0.091 – 0.30 0.28 0.24 0.23 0.17 0.16 – – – – – – – – 0.55 0.50 0.44 0.44 0.25 0.25 – – – – – – – 1.54 1.19 1.05 0.84 0.58 0.49 – – – – – – 1.54 1.19 1.05 0.84 0.58 0.49 2.24 1.68 1.44 1.2 0.88 0.73 850 1,320 1,470 1,820 2,060 2,400 2,640 60 85 165 165 195 195 350 670 980 1,090 1,320 1,420 1,910 2,180 50 80 120 250 250 250 400 880 1,000 1,220 1,430 1,790 1,960 25 40 60 130 130 200 810 1,000 1,220 1,430 1,790 1,960 740 900 1,090 1,280 1,580 1,690 Part No. EMZA350 □ RA331MJA0G EMZA350 □ RA621MKE0S EMZA350 □ RA821MKG5S EMZA350 □ RA122MLH0S EMZA350 □ RA162MMH0S EMZA350 □ RA182MLN0S EMZA350 □ RA242MMN0S EMZA500ARA4R7MD61G EMZA500ARA100ME61G EMZA500 □ RA100MF61G EMZA500 □ RA220MF61G EMZA500 □ RA330MF80G EMZA500 □ RA470MF80G EMZA500 □ RA101MHA0G EMZA500 □ RA221MJA0G EMZA500 □ RA331MKE0S EMZA500 □ RA431MKG5S EMZA500 □ RA621MLH0S EMZA500 □ RA821MMH0S EMZA500 □ RA102MLN0S EMZA500 □ RA132MMN0S EMZA630ARA4R7ME61G EMZA630 □ RA100MF61G EMZA630 □ RA220MF80G EMZA630 □ RA330MHA0G EMZA630 □ RA470MHA0G EMZA630 □ RA680MHA0G EMZA630 □ RA101MJA0G EMZA630 □ RA241MKE0S EMZA630 □ RA301MKG5S EMZA630 □ RA431MLH0S EMZA630 □ RA561MMH0S EMZA630 □ RA681MLN0S EMZA630 □ RA911MMN0S EMZA800ARA3R3ME61G EMZA800 □ RA4R7MF61G EMZA800 □ RA100MF80G EMZA800 □ RA220MHA0G EMZA800 □ RA330MHA0G EMZA800 □ RA470MJA0G EMZA800 □ RA151MKE0S EMZA800 □ RA221MKG5S EMZA800 □ RA331MLH0S EMZA800 □ RA431MMH0S EMZA800 □ RA471MLN0S EMZA800 □ RA681MMN0S EMZA101 □ RA111MKE0S EMZA101 □ RA131MKG5S EMZA101 □ RA201MLH0S EMZA101 □ RA271MMH0S EMZA101 □ RA331MLN0S EMZA101 □ RA431MMN0S □ : Enter the appropriate terminal code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Size code D61 to JA0 KE0 to MN0 Capacitance(µF) Frequency(Hz) 3.3 to 4.7 10 to 100 220 to 470 680 to 1,500 110 to 200 220 to 620 680 to 1,800 2,400 to 3,000 3,900 120 0.35 0.40 0.50 0.60 0.40 0.50 0.60 0.75 0.85 1k 0.70 0.75 0.85 0.87 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.90 0.94 0.95 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MVY - Low impedance, 105℃ Upgrade! Series MZA Lower Z ・Endurance : 1,000 to 5,000 hours at 105℃ ・Low impedance ・For digital equipment, especially DC-DC converters ・Solvent resistant type except 80 & 100Vdc (see PRECAUTIONS AND GUIDELINES) ・Vibration resistant structure ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. MVY Longer life MLA Lower Z MVE ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105℃ (6.3 to 63Vdc) -40 to +105℃ (80 & 100Vdc) 6.3 to 100Vdc (at 20℃, 120Hz) ±20% (M) I=0.01CV or 3μA, whichever is greater. Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V When nominal capacitance exceeds - 1,000μF, add 0.02 to the value above D55 to F80 0.24 0.20 0.16 0.14 0.12 0.12 tanδ (Max.) HA0 & JA0 0.28 0.24 0.20 0.16 0.14 0.12 - for each 1,000μF increase. (at 20℃, 120Hz) KE0 to MN0 0.26 0.22 0.18 0.16 0.14 0.12 0.14 0.10 0.10 Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V D55 to JA0 3 2 2 2 2 2 Z(-40℃)/Z(+20℃) KE0 to MN0 10 8 6 4 3 3 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for specified ime at 105℃. D55 to F80 : 1,000 hours Time HA0 & JA0 : 2,000 hours KE0 to MN0 : 5,000 hours Rated voltage 6.3Vdc (D55 to JA0) 6.3 to 100Vdc Capacitance change ≦±30% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦300% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3Vdc (D55 to JA0) 6.3 to 100Vdc Capacitance change ≦±30% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦300% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : D55 to MN0 ● Size code : F61 to MN0 0.3max. L±0.3 (Note) φD±0.5 P C±0.2 B±0.2 φD±0.5 W 0.3max. L±0.3 (Note) Note : L±0.5 for HA0 to MN0 A±0.2 Note : L±0.5 for HA0 to MN0 2 3 4 5 6 7 8 9 10 11 12 A±0.2 : Dummy terminals ◆PART NUMBERING SYSTEM 1 W P C±0.2 Vent (Except F61 to HA0) B±0.2 Vent (Except D55 to HA0) 13 14 15 16 17 18 E MV Y AAA A DA AAA M AAA G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7µF:4R7,10µF:100) Taping·Tray code Terminal code (A, G) Voltage code (ex. 6.3V:6R3,10V:100,50V:500) Series code Category C B A L Size code D 5.2 4.3 4.3 5.1 4 D55 5.2 5.3 5.3 5.9 5 E55 6.3 5.2 6.6 6.6 7.2 F55 6.3 5.8 6.6 6.6 7.2 F61 6.3 7.7 6.6 6.6 7.2 F80 8 10.0 8.3 8.3 9.0 HA0 10 10.0 10.3 10.3 11.0 JA0 12.5 13.5 13.0 13.0 13.7 KE0 12.5 16.0 13.0 13.0 13.7 KG5 16 16.5 17.0 17.0 18.0 LH0 16 21.5 17.0 17.0 18.0 LN0 18 16.5 19.0 19.0 20.0 MH0 18 21.5 19.0 19.0 20.0 MN0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 P 1.0 1.4 1.9 1.9 1.9 3.1 4.5 4.2 4.2 6.5 6.5 6.5 6.5 ◆MARKING D55 to JA0 EX) 6.3V100µF 7hY 100 6.3V KE0 to MN0 EX) 16V1,000µF 0V MVY 1000 16V Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip - MVYSeries Upgrade! ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Low impedance, 105℃ Cap (µF) Size code 22 33 47 100 220 330 470 680 1,000 1,500 2,200 2,200 3,300 3,300 4,700 4,700 6,800 6,800 8,200 22 33 47 100 220 330 470 680 1,000 2,200 2,200 3,300 3,300 4,700 4,700 6,800 10 22 33 47 100 220 330 470 680 1,000 1,000 2,200 2,200 3,300 3,300 4,700 10 22 33 47 100 220 D55 E55 E55 F55 F55 F80 HA0 HA0 HA0 JA0 KE0 LH0 KG5 MH0 LN0 MH0 LN0 MN0 MN0 E55 E55 F55 F55 F80 HA0 HA0 JA0 JA0 KG5 LH0 LH0 MH0 LN0 MN0 MN0 D55 E55 F55 F55 F55 F80 HA0 HA0 JA0 KE0 LH0 LH0 MH0 LN0 MH0 MN0 E55 F55 F55 F55 F80 HA0 is not solvent resistant (80/100Vdc). Rated ripple Impedance current (Ω max./20℃, (mArms/105℃, 100kHz) 100kHz) 3.0 1.8 1.8 1.0 1.0 0.34 0.30 0.30 0.30 0.15 0.070 0.054 0.060 0.054 0.038 0.054 0.038 0.038 0.038 1.8 1.8 1.0 1.0 0.34 0.30 0.30 0.15 0.15 0.060 0.054 0.054 0.054 0.038 0.038 0.038 3.0 1.8 1.0 1.0 1.0 0.34 0.30 0.30 0.15 0.070 0.054 0.054 0.054 0.038 0.054 0.038 1.8 1.0 1.0 1.0 0.34 0.30 60 95 95 140 140 280 450 450 450 670 820 1,260 950 1,350 1,630 1,350 1,630 1,750 1,750 95 95 140 140 280 450 450 670 670 950 1,260 1,260 1,350 1,630 1,750 1,750 60 95 140 140 140 280 450 450 670 820 1,260 1,260 1,350 1,630 1,350 1,750 95 140 140 140 280 450 Part No. EMVY6R3ARA220MD55G EMVY6R3ARA330ME55G EMVY6R3ARA470ME55G EMVY6R3ARA101MF55G EMVY6R3ARA221MF55G EMVY6R3□RA331MF80G EMVY6R3□RA471MHA0G EMVY6R3□RA681MHA0G EMVY6R3□RA102MHA0G EMVY6R3□RA152MJA0G EMVY6R3□RA222MKE0S EMVY6R3□RA222MLH0S EMVY6R3□RA332MKG5S EMVY6R3□RA332MMH0S EMVY6R3□RA472MLN0S EMVY6R3□RA472MMH0S EMVY6R3□RA682MLN0S EMVY6R3□RA682MMN0S EMVY6R3□RA822MMN0S EMVY100ARA220ME55G EMVY100ARA330ME55G EMVY100ARA470MF55G EMVY100ARA101MF55G EMVY100□RA221MF80G EMVY100□RA331MHA0G EMVY100□RA471MHA0G EMVY100□RA681MJA0G EMVY100□RA102MJA0G EMVY100□RA222MKG5S EMVY100□RA222MLH0S EMVY100□RA332MLH0S EMVY100□RA332MMH0S EMVY100□RA472MLN0S EMVY100□RA472MMN0S EMVY100□RA682MMN0S EMVY160ARA100MD55G EMVY160ARA220ME55G EMVY160ARA330MF55G EMVY160ARA470MF55G EMVY160ARA101MF55G EMVY160□RA221MF80G EMVY160□RA331MHA0G EMVY160□RA471MHA0G EMVY160□RA681MJA0G EMVY160□RA102MKE0S EMVY160□RA102MLH0S EMVY160□RA222MLH0S EMVY160□RA222MMH0S EMVY160□RA332MLN0S EMVY160□RA332MMH0S EMVY160□RA472MMN0S EMVY250ARA100ME55G EMVY250ARA220MF55G EMVY250ARA330MF55G EMVY250ARA470MF55G EMVY250□RA101MF80G EMVY250□RA221MHA0G □ : Enter the appropriate terminal code. WV (Vdc) 25 35 50 63 80 100 Cap (µF) Size code 330 470 1,000 1,000 2,200 2,200 3,300 4.7 10 22 33 47 47 68 100 220 330 470 470 1,000 1,000 2,200 1.0 2.2 3.3 4.7 10 22 33 47 68 100 220 330 330 470 470 1,000 68 100 220 220 330 330 470 470 100 220 330 330 470 47 68 100 100 220 220 330 HA0 JA0 LH0 MH0 LN0 MN0 MN0 D55 E55 F55 F55 F55 F61 F80 HA0 HA0 JA0 KE0 LH0 LH0 MH0 MN0 D55 D55 D55 E55 F55 F55 F80 F80 HA0 HA0 JA0 KE0 LH0 LH0 MH0 MN0 KE0 KE0 KE0 LH0 LH0 MH0 LN0 MH0 KE0 KG5 LN0 MH0 MN0 KE0 KE0 KE0 LH0 LN0 MH0 MN0 Rated ripple Impedance current (Ω max./20℃, (mArms/105℃, 100kHz) 100kHz) 0.30 0.15 0.054 0.054 0.038 0.038 0.038 3.0 1.8 1.0 1.0 1.0 1.0 0.34 0.30 0.30 0.15 0.070 0.054 0.054 0.054 0.038 5.0 5.0 5.0 3.0 2.0 2.0 0.60 0.60 0.60 0.60 0.30 0.11 0.087 0.087 0.087 0.050 0.19 0.19 0.19 0.12 0.12 0.12 0.085 0.12 0.33 0.26 0.16 0.24 0.16 0.33 0.33 0.33 0.24 0.16 0.24 0.16 450 670 1,260 1,350 1,630 1,750 1,750 60 95 140 140 140 140 280 450 450 670 820 1,260 1,260 1,350 1,750 30 30 30 50 70 70 170 170 300 300 500 650 900 900 1,060 1,520 500 500 500 845 845 905 1,100 905 450 550 900 700 950 450 450 450 650 900 700 950 Part No. EMVY250□RA331MHA0G EMVY250□RA471MJA0G EMVY250□RA102MLH0S EMVY250□RA102MMH0S EMVY250□RA222MLN0S EMVY250□RA222MMN0S EMVY250□RA332MMN0S EMVY350ARA4R7MD55G EMVY350ARA100ME55G EMVY350ARA220MF55G EMVY350ARA330MF55G EMVY350ARA470MF55G EMVY350□RA470MF61G EMVY350□RA680MF80G EMVY350□RA101MHA0G EMVY350□RA221MHA0G EMVY350□RA331MJA0G EMVY350□RA471MKE0S EMVY350□RA471MLH0S EMVY350□RA102MLH0S EMVY350□RA102MMH0S EMVY350□RA222MMN0S EMVY500ARA1R0MD55G EMVY500ARA2R2MD55G EMVY500ARA3R3MD55G EMVY500ARA4R7ME55G EMVY500ARA100MF55G EMVY500ARA220MF55G EMVY500□RA330MF80G EMVY500□RA470MF80G EMVY500□RA680MHA0G EMVY500□RA101MHA0G EMVY500□RA221MJA0G EMVY500□RA331MKE0S EMVY500□RA331MLH0S EMVY500□RA471MLH0S EMVY500□RA471MMH0S EMVY500□RA102MMN0S EMVY630□RA680MKE0S EMVY630□RA101MKE0S EMVY630□RA221MKE0S EMVY630□RA221MLH0S EMVY630□RA331MLH0S EMVY630□RA331MMH0S EMVY630□RA471MLN0S EMVY630□RA471MMH0S EMVY800□RA101MKE0S EMVY800□RA221MKG5S EMVY800□RA331MLN0S EMVY800□RA331MMH0S EMVY800□RA471MMN0S EMVY101□RA470MKE0S EMVY101□RA680MKE0S EMVY101□RA101MKE0S EMVY101□RA101MLH0S EMVY101□RA221MLN0S EMVY101□RA221MMH0S EMVY101□RA331MMN0S ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Size code D55 to JA0 KE0 to MN0 Capacitance(µF) Frequency(Hz) 1.0 to 4.7 10 to 100 220 to 470 680 to 1,500 47 to 100 220 to 470 1,000 2,200 to 3,300 4,700 to 8,200 120 0.35 0.40 0.50 0.60 0.40 0.50 0.60 0.75 0.85 1k 0.70 0.75 0.85 0.87 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.90 0.94 0.95 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM Alchip Low impedance, 10000-hours-life, 105℃ MZF - Series ・Endurance : 10,000 hours at 105℃ ・Low impedance ・Rated voltage range : 6.3 to 50V ・Nominal capacitance range : 10 to 470µF ・Suitable for long life and low profile products ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant MLA Longer life MZE Longer life MZF ◆SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life Characteristics -25 to +105℃ 6.3 to 50Vdc ±20%(M) I＝0.01CV or 3μA, whichever is greater Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tanδ (Max.) 0.32 0.28 0.26 0.16 0.14 0.14 Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V Z(-10℃)/Z(+20℃) 4 3 2 2 2 2 (at 20℃,120Hz) ◆PART NUMBERING SYSTEM ●Terminal Code : A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E MZ F AAA A RA AAA M AAA G Vent for JA0 W 0.3max. L±0.3 (Note) Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,25V:250) Series code Category P C±0.2 B±0.2 φD±0.5 (at 20℃, after 2 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 10,000 hours at 105℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value ◆DIMENSIONS [mm] A±0.2 Note : L±0.5 for HA0 and JA0 Size code E73 F73 F90 HA0 JA0 (at 20℃,120Hz) C B A L D 7.0 5.3 5.3 5.9 5 6.3 7.0 6.6 6.6 7.2 6.3 8.7 6.6 6.6 7.2 8 10.0 8.3 8.3 9.0 10 10.0 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.4 1.9 1.9 3.1 4.5 Please refer to "Product code guide (surface mount type)" ◆MARKING EX) 16V47µF 4h 47 C ZF ●Rated voltage symbol Rated voltage (Vdc) 6.3 Symbol j 10 A 16 C 25 E 35 V 50 H Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip - Low impedance, 10000-hours-life, 105℃ MZFSeries ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (µF) 47 100 220 330 470 33 150 22 47 100 150 220 330 470 22 Rated ripple Impedance current Size code (Ω max./20℃, (mArms/105℃, 100kHz) 100kHz) E73 F73 F90 F90 HA0 E73 F73 E73 F73 F73 F90 F90 HA0 JA0 E73 2.2 1.1 1.0 1.0 0.22 2.2 1.1 2.2 1.1 1.1 1.0 1.0 0.22 0.16 2.2 95 140 230 230 600 95 140 95 140 140 230 230 600 850 95 Part No. EMZF6R3ARA470ME73G EMZF6R3ARA101MF73G EMZF6R3ARA221MF90G EMZF6R3ARA331MF90G EMZF6R3ARA471MHA0G EMZF100ARA330ME73G EMZF100ARA151MF73G EMZF160ARA220ME73G EMZF160ARA470MF73G EMZF160ARA101MF73G EMZF160ARA151MF90G EMZF160ARA221MF90G EMZF160ARA331MHA0G EMZF160ARA471MJA0G EMZF250ARA220ME73G WV (Vdc) 25 35 50 Cap (µF) 33 47 100 220 330 10 10 22 22 33 47 100 220 47 100 Rated ripple Impedance current Size code (Ω max./20℃, (mArms/105℃, 100kHz) 100kHz) F73 F73 F90 HA0 JA0 E73 F73 E73 F73 F90 F90 HA0 JA0 HA0 JA0 1.1 1.1 1.0 0.22 0.16 2.2 1.1 2.2 1.1 1.0 1.0 0.22 0.16 0.53 0.35 140 140 230 600 850 95 140 95 140 230 230 600 850 350 670 Part No. EMZF250ARA330MF73G EMZF250ARA470MF73G EMZF250ARA101MF90G EMZF250ARA221MHA0G EMZF250ARA331MJA0G EMZF350ARA100ME73G EMZF350ARA100MF73G EMZF350ARA220ME73G EMZF350ARA220MF73G EMZF350ARA330MF90G EMZF350ARA470MF90G EMZF350ARA101MHA0G EMZF350ARA221MJA0G EMZF500ARA470MHA0G EMZF500ARA101MJA0G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 10 to 150 220 to 470 120 0.40 0.50 1k 0.75 0.85 10k 0.90 0.94 100k 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Low impedance, 7000 to 8000-hours-life, 105℃ MZE - Series ・Endurance : 7,000 to 8,000 hours at 105℃ ・Low impedance ・Rated voltage range : 6.3 to 50V ・Nominal capacitance range : 10 to 470µF ・Suitable for long life and low profile products ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant MVY Longer life MLA Longer life MZE ◆SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life Characteristics -25 to +105℃ 6.3 to 50Vdc ±20%(M) I=0.01CV or 3μA, whichever is greater Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tanδ (Max.) 0.32 0.28 0.26 0.16 0.14 0.14 Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V Z(-10℃)/Z(+20℃) 4 3 2 2 2 2 ●Terminal Code : A Vent for JA0 (at 20℃,120Hz) ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E MZ E AAA A RA AAA M AAA G W 0.3max. L±0.3 (Note) Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,25V:250) Series code Category P C±0.2 B±0.2 φD±0.5 (at 20℃, after 2 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for specified time at 105℃. E73 & F73 : 7,000 hours Time F90 to JA0 : 8,000 hours Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value ◆DIMENSIONS [mm] A±0.2 Note : L±0.5 for HA0 and JA0 Size code E73 F73 F90 HA0 JA0 (at 20℃,120Hz) C B A L D 7.0 5.3 5.3 5.9 5 6.3 7.0 6.6 6.6 7.2 6.3 8.7 6.6 6.6 7.2 8 10.0 8.3 8.3 9.0 10 10.0 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.4 1.9 1.9 3.1 4.5 Please refer to "Product code guide (surface mount type)" ◆MARKING EX) 16V47µF 4h 47 CZE ●Rated voltage symbol Rated voltage (Vdc) 6.3 Symbol j 10 A 16 C 25 E 35 V 50 H Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip - Low impedance, 7000 to 8000-hours-life, 105℃ MZESeries ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (µF) Size code 47 100 220 330 470 33 150 22 47 100 150 220 330 470 22 E73 F73 F90 F90 HA0 E73 F73 E73 F73 F73 F90 F90 HA0 JA0 E73 Rated ripple Impedance current (Ω max./20℃, (mArms/105℃, 100kHz) 100kHz) 2.2 1.1 1.0 1.0 0.22 2.2 1.1 2.2 1.1 1.1 1.0 1.0 0.22 0.16 2.2 95 140 230 230 600 95 140 95 140 140 230 230 600 850 95 Part No. EMZE6R3ARA470ME73G EMZE6R3ARA101MF73G EMZE6R3ARA221MF90G EMZE6R3ARA331MF90G EMZE6R3ARA471MHA0G EMZE100ARA330ME73G EMZE100ARA151MF73G EMZE160ARA220ME73G EMZE160ARA470MF73G EMZE160ARA101MF73G EMZE160ARA151MF90G EMZE160ARA221MF90G EMZE160ARA331MHA0G EMZE160ARA471MJA0G EMZE250ARA220ME73G WV (Vdc) 25 35 50 Cap (µF) Size code 33 47 100 220 330 10 10 22 22 33 47 100 220 47 100 F73 F73 F90 HA0 JA0 E73 F73 E73 F73 F90 F90 HA0 JA0 HA0 JA0 Rated ripple Impedance current (Ω max./20℃, (mArms/105℃, 100kHz) 100kHz) 1.1 1.1 1.0 0.22 0.16 2.2 1.1 2.2 1.1 1.0 1.0 0.22 0.16 0.53 0.35 140 140 230 600 850 95 140 95 140 230 230 600 850 350 670 Part No. EMZE250ARA330MF73G EMZE250ARA470MF73G EMZE250ARA101MF90G EMZE250ARA221MHA0G EMZE250ARA331MJA0G EMZE350ARA100ME73G EMZE350ARA100MF73G EMZE350ARA220ME73G EMZE350ARA220MF73G EMZE350ARA330MF90G EMZE350ARA470MF90G EMZE350ARA101MHA0G EMZE350ARA221MJA0G EMZE500ARA470MHA0G EMZE500ARA101MJA0G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 10 to 150 220 to 470 120 0.40 0.50 1k 0.75 0.85 10k 0.90 0.94 100k 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Low impedance, 5000-hours-life, 105℃ MZK - Series ・Endurance : 5,000 hours at 105℃ ・Low impedance ・Rated voltage range : 6.3 to 35V ・Nominal capacitance range : 10 to 150µF ・Suitable for low profile products ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant MVY Longer life MZK ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -25 to +105℃ 6.3 to 35Vdc ±20%(M) I=0.01CV or 3μA, whichever is greater Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V tanδ (Max.) 0.32 0.28 0.26 0.16 0.14 Rated voltage(Vdc) 6.3V 10V 16V 25V 35V Z(-10℃)/Z(+20℃) 4 3 2 2 2 1 2 3 4 5 6 7 8 9 11 12 13 14 15 16 17 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,35V:350) Series code Category P C±0.2 B±0.2 φD±0.5 0.3max. L±0.3 A±0.2 A 5.3 6.6 10 E MZK AAA A RA AAA M AAA G W L 5.8 5.8 (at 20℃,120Hz) ◆PART NUMBERING SYSTEM ●Terminal Code : A D 5 6.3 (at 20℃, after 2 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 hours at 105℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value ◆DIMENSIONS [mm] Size code E61 F61 (at 20℃,120Hz) B 5.3 6.6 C 5.9 7.2 W 0.5 to 0.8 0.5 to 0.8 P 1.4 1.9 Please refer to "Product code guide (surface mount type)" ◆MARKING EX) 35V47µF 9C 47 V ZK ●Rated voltage symbol Rated voltage (Vdc) 6.3 Symbol j 10 A 16 C 25 E 35 V Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip - Low impedance, 5000-hours-life, 105℃ MZKSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Size code Impedance (Ω max./20℃, 100kHz) Rated ripple current (mArms/105℃, 100kHz) Part No. 6.3 10 100 150 33 47 100 68 10 10 22 22 33 47 E61 F61 E61 E61 F61 F61 E61 F61 E61 F61 F61 F61 2.2 1.1 2.2 2.2 1.1 1.1 2.2 1.1 2.2 1.1 1.1 1.1 95 140 95 95 140 140 95 140 95 140 140 140 EMZK6R3ARA101ME61G EMZK100ARA151MF61G EMZK160ARA330ME61G EMZK160ARA470ME61G EMZK160ARA101MF61G EMZK250ARA680MF61G EMZK350ARA100ME61G EMZK350ARA100MF61G EMZK350ARA220ME61G EMZK350ARA220MF61G EMZK350ARA330MF61G EMZK350ARA470MF61G 16 25 35 ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 6.3 to 35Vdc 120 0.40 1k 0.75 10k 0.90 100k 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Low impedance, 105℃ MLA - Series ・Low impedance, long life ・Rated voltage 6.3 to 50V, Capacitance 10 to 1,000µF ・Case sizeφ5×5.8L to φ10×10L ・Suitable for applications requiring long life and low impedance such as equipment in continuous operation, industrial applications, etc. ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant MVY Longer life MLA ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 6.3 to 50Vdc (at 20℃, 120Hz) ±20%(M) I=0.01CV or 3μA, whichever is greater Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V E61 to F61 0.28 0.24 0.22 0.16 0.13 0.12 F80 0.32 0.27 0.24 0.16 0.13 0.12 tanδ (Max.) HA0 to JA0 0.28 0.24 0.22 0.16 0.13 0.12 (at 20℃, 120Hz) Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V Z(-25℃)/Z(+20℃) 4 3 2 2 2 2 Z(-40℃)/Z(+20℃) 10 7 5 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 3,000 hours at 105℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf life ◆DIMENSIONS [mm] ◆MARKING ●Terminal Code : A Vent for JA0 Size code E61 F61 F80 HA0 JA0 P C±0.2 B±0.2 φD±0.5 W 0.3max. L±0.3 (Note) D 5 6.3 6.3 8 10 C B A L 5.8 5.3 5.3 5.9 5.8 6.6 6.6 7.2 7.7 6.6 6.6 7.2 10.0 8.3 8.3 9.0 10.0 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.4 1.9 1.9 3.1 4.5 EX) 16V100µF 4R 100 CLA A±0.2 Note : L±0.5 for HA0 and JA0 ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 ●Rated voltage symbol 18 E MLA AAA A RA AAA M AAA G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 10µF:100,100µF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,50V:500) Series code Category Rated voltage (Vdc) Symbol j 6.3 A 10 C 16 E 25 V 35 H 50 Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip - Low impedance, 105℃ MLASeries ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (µF) Rated ripple Impedance current Size tanδ (Ω max./20℃, code (mArms/105℃, 100kHz) 100kHz) 47 100 150 220 330 330 470 1,000 33 47 100 150 220 220 330 470 22 33 47 100 100 150 220 220 330 470 470 10 22 22 E61 F61 F61 F80 F80 HA0 HA0 JA0 E61 F61 F61 F61 F80 HA0 HA0 HA0 E61 F61 F61 F61 F80 F80 F80 HA0 HA0 HA0 JA0 E61 E61 F61 0.28 0.28 0.28 0.32 0.32 0.28 0.28 0.28 0.24 0.24 0.24 0.24 0.27 0.24 0.24 0.24 0.22 0.22 0.22 0.22 0.24 0.24 0.24 0.22 0.22 0.22 0.22 0.16 0.16 0.16 1.30 0.70 0.70 0.70 0.70 0.16 0.16 0.08 1.30 0.70 0.70 0.70 0.70 0.16 0.16 0.16 1.30 0.70 0.70 0.70 0.70 0.70 0.70 0.16 0.16 0.16 0.08 1.30 1.30 0.70 95 140 140 230 230 600 600 850 95 140 140 140 230 600 600 600 95 140 140 140 230 230 230 600 600 600 850 95 95 140 Part No. EMLA6R3ARA470ME61G EMLA6R3ARA101MF61G EMLA6R3ARA151MF61G EMLA6R3ARA221MF80G EMLA6R3ARA331MF80G EMLA6R3ARA331MHA0G EMLA6R3ARA471MHA0G EMLA6R3ARA102MJA0G EMLA100ARA330ME61G EMLA100ARA470MF61G EMLA100ARA101MF61G EMLA100ARA151MF61G EMLA100ARA221MF80G EMLA100ARA221MHA0G EMLA100ARA331MHA0G EMLA100ARA471MHA0G EMLA160ARA220ME61G EMLA160ARA330MF61G EMLA160ARA470MF61G EMLA160ARA101MF61G EMLA160ARA101MF80G EMLA160ARA151MF80G EMLA160ARA221MF80G EMLA160ARA221MHA0G EMLA160ARA331MHA0G EMLA160ARA471MHA0G EMLA160ARA471MJA0G EMLA250ARA100ME61G EMLA250ARA220ME61G EMLA250ARA220MF61G WV (Vdc) 25 35 50 Cap (µF) Rated ripple Impedance current Size tanδ (Ω max./20℃, code (mArms/105℃, 100kHz) 100kHz) 33 47 47 100 100 150 220 330 330 470 10 22 33 33 47 100 100 150 220 220 330 10 22 33 47 47 100 100 150 220 F61 F61 F80 F80 HA0 HA0 HA0 HA0 JA0 JA0 E61 F61 F61 F80 F80 F80 HA0 HA0 HA0 JA0 JA0 F61 F61 F80 F80 HA0 HA0 JA0 JA0 JA0 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.13 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.70 0.70 0.70 0.70 0.16 0.16 0.16 0.16 0.08 0.08 1.30 0.70 0.70 0.70 0.70 0.70 0.16 0.16 0.16 0.08 0.08 2.00 2.00 1.60 1.60 0.34 0.34 0.18 0.18 0.18 140 140 230 230 600 600 600 600 850 850 95 140 140 230 230 230 600 600 600 850 850 70 70 100 100 350 350 670 670 670 Part No. EMLA250ARA330MF61G EMLA250ARA470MF61G EMLA250ARA470MF80G EMLA250ARA101MF80G EMLA250ARA101MHA0G EMLA250ARA151MHA0G EMLA250ARA221MHA0G EMLA250ARA331MHA0G EMLA250ARA331MJA0G EMLA250ARA471MJA0G EMLA350ARA100ME61G EMLA350ARA220MF61G EMLA350ARA330MF61G EMLA350ARA330MF80G EMLA350ARA470MF80G EMLA350ARA101MF80G EMLA350ARA101MHA0G EMLA350ARA151MHA0G EMLA350ARA221MHA0G EMLA350ARA221MJA0G EMLA350ARA331MJA0G EMLA500ARA100MF61G EMLA500ARA220MF61G EMLA500ARA330MF80G EMLA500ARA470MF80G EMLA500ARA470MHA0G EMLA500ARA101MHA0G EMLA500ARA101MJA0G EMLA500ARA151MJA0G EMLA500ARA221MJA0G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 10 to 150 220 to 470 1,000 120 0.40 0.50 0.60 1k 0.75 0.85 0.87 10k 0.90 0.94 0.95 100k 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip 10000-hours-life, 105℃ MLF - Series ・Endurance : 10,000 hours at 105℃ ・Rated voltage range : 6.3 to 50V ・Nominal capacitance range : 1.0 to 1,000µF ・Suitable for long life and low profile products ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant MVL Longer life MLE Longer life MLF ◆SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life Characteristics -25 to +105℃ 6.3 to 50Vdc ±20%(M) I=0.03CV or 4μA, whichever is greater Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tanδ (Max.) 0.32 0.28 0.26 0.16 0.14 0.14 Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V Z(-10℃)/Z(+20℃) 4 3 2 2 2 2 (at 20℃,120Hz) ◆PART NUMBERING SYSTEM ●Terminal Code : A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E ML F AAA A RA AAA M AAA G Vent for JA0 W Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,25V:250) Series code Category P C±0.2 B±0.2 φD±0.5 (at 20℃, after 2 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 10,000 hours at 105℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value ◆DIMENSIONS [mm] 0.3max. A±0.2 L±0.3 (Note) Note : L±0.5 for HA0 and JA0 Size code D73 E73 F73 F90 HA0 JA0 (at 20℃,120Hz) C B A L D 7.0 4.3 4.3 5.1 4 7.0 5.3 5.3 5.9 5 6.3 7.0 6.6 6.6 7.2 6.3 8.7 6.6 6.6 7.2 8 10.0 8.3 8.3 9.0 10 10.0 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.0 1.4 1.9 1.9 3.1 4.5 Please refer to "Product code guide (surface mount type)" ◆MARKING EX) 16V47µF 4h 47 C LF ●Rated voltage symbol Rated voltage (Vdc) Symbol 6.3 j 10 A 16 C 25 E 35 V 50 H Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip - 10000-hours-life, 105℃ MLFSeries ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (µF) Size code Rated ripple current (mArms/105℃, 120Hz) Part No. 22 47 100 220 330 1,000 33 220 10 22 47 100 470 33 47 100 D73 E73 F73 F90 HA0 JA0 E73 HA0 D73 E73 F73 F90 JA0 F73 F90 HA0 22 36 60 101 160 313 35 141 18 30 50 81 254 48 63 116 EMLF6R3ARA220MD73G EMLF6R3ARA470ME73G EMLF6R3ARA101MF73G EMLF6R3ARA221MF90G EMLF6R3ARA331MHA0G EMLF6R3ARA102MJA0G EMLF100ARA330ME73G EMLF100ARA221MHA0G EMLF160ARA100MD73G EMLF160ARA220ME73G EMLF160ARA470MF73G EMLF160ARA101MF90G EMLF160ARA471MJA0G EMLF250ARA330MF73G EMLF250ARA470MF90G EMLF250ARA101MHA0G WV (Vdc) 35 50 Cap (µF) Size code Rated ripple current (mArms/105℃, 120Hz) Part No. 1.0 2.2 3.3 4.7 4.7 10 10 22 22 33 220 33 47 100 D73 D73 D73 D73 E73 E73 F73 F73 F90 F90 JA0 HA0 HA0 JA0 6.2 11 14 15 19 25 30 42 49 57 216 77 92 151 EMLF350ARA1R0MD73G EMLF350ARA2R2MD73G EMLF350ARA3R3MD73G EMLF350ARA4R7MD73G EMLF350ARA4R7ME73G EMLF350ARA100ME73G EMLF350ARA100MF73G EMLF350ARA220MF73G EMLF350ARA220MF90G EMLF350ARA330MF90G EMLF350ARA221MJA0G EMLF500ARA330MHA0G EMLF500ARA470MHA0G EMLF500ARA101MJA0G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 1.0 2.2 to 10 22 to 1,000 120 1.00 1.00 1.00 1k 1.50 1.30 1.05 10k 1.75 1.40 1.08 100k 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip 7000 to 8000-hours-life, 105℃ MLE - Series ・Endurance : 7,000 to 8,000 hours at 105℃ ・Rated voltage range : 6.3 to 50V ・Nominal capacitance range : 1.0 to 1,000µF ・Suitable for long life and low profile products ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant MVJ Longer life MVL Longer life MLE ◆SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life Characteristics -25 to +105℃ 6.3 to 50Vdc ±20%(M) I=0.03CV or 4μA, whichever is greater Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tanδ (Max.) 0.32 0.28 0.26 0.16 0.14 0.14 Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V Z(-10℃)/Z(+20℃) 4 3 2 2 2 2 (at 20℃,120Hz) ◆PART NUMBERING SYSTEM ●Terminal Code : A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E ML E AAA A RA AAA M AAA G Vent for JA0 W 0.3max. L±0.3 (Note) Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,25V:250) Series code Category P C±0.2 B±0.2 φD±0.5 (at 20℃, after 2 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for specified time at 105℃. D73 to F73 : 7,000 hours Time F90 to JA0 : 8,000 hours Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value ◆DIMENSIONS [mm] A±0.2 Note : L±0.5 for HA0 and JA0 Size code D73 E73 F73 F90 HA0 JA0 (at 20℃,120Hz) B C A L D 7.0 4.3 4.3 5.1 4 7.0 5.3 5.3 5.9 5 6.3 7.0 6.6 6.6 7.2 6.3 8.7 6.6 6.6 7.2 8 10.0 8.3 8.3 9.0 10 10.0 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.0 1.4 1.9 1.9 3.1 4.5 Please refer to "Product code guide (surface mount type)" ◆MARKING EX) 16V47µF 4h 47 C LE ●Rated voltage symbol Rated voltage (Vdc) 6.3 Symbol j 10 A 16 C 25 E 35 V 50 H Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip - 7000 to 8000-hours-life, 105℃ MLESeries ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (µF) Size code Rated ripple current (mArms/105℃, 120Hz) Part No. 22 47 100 220 330 1,000 33 220 10 22 47 100 470 33 47 100 D73 E73 F73 F90 HA0 JA0 E73 HA0 D73 E73 F73 F90 JA0 F73 F90 HA0 22 36 60 101 160 313 35 141 18 30 50 81 254 48 63 116 EMLE6R3ARA220MD73G EMLE6R3ARA470ME73G EMLE6R3ARA101MF73G EMLE6R3ARA221MF90G EMLE6R3ARA331MHA0G EMLE6R3ARA102MJA0G EMLE100ARA330ME73G EMLE100ARA221MHA0G EMLE160ARA100MD73G EMLE160ARA220ME73G EMLE160ARA470MF73G EMLE160ARA101MF90G EMLE160ARA471MJA0G EMLE250ARA330MF73G EMLE250ARA470MF90G EMLE250ARA101MHA0G WV (Vdc) 35 50 Cap (µF) Size code Rated ripple current (mArms/105℃, 120Hz) Part No. 1.0 2.2 3.3 4.7 4.7 10 10 22 22 33 220 33 47 100 D73 D73 D73 D73 E73 E73 F73 F73 F90 F90 JA0 HA0 HA0 JA0 6.2 11 14 15 19 25 30 42 49 57 216 77 92 151 EMLE350ARA1R0MD73G EMLE350ARA2R2MD73G EMLE350ARA3R3MD73G EMLE350ARA4R7MD73G EMLE350ARA4R7ME73G EMLE350ARA100ME73G EMLE350ARA100MF73G EMLE350ARA220MF73G EMLE350ARA220MF90G EMLE350ARA330MF90G EMLE350ARA221MJA0G EMLE500ARA330MHA0G EMLE500ARA470MHA0G EMLE500ARA101MJA0G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 1.0 2.2 to 10 22 to 1,000 120 1.00 1.00 1.00 1k 1.50 1.30 1.05 10k 1.75 1.40 1.08 100k 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip 5000-hours-life, 105℃ MLK - Series ・6.1mm height ・Endurance : 5,000 hours at 105℃ ・Rated voltage range : 6.3 to 35V ・Nominal capacitance range : 4.7 to 100µF ・Suitable to fit for downsized equipment ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant MVL Longer life MLK ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -25 to +105℃ 6.3 to 35Vdc ±20%(M) I=0.03CV or 4μA, whichever is greater Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V tanδ (Max.) 0.32 0.28 0.26 0.16 0.14 Rated voltage(Vdc) 6.3V 10V 16V 25V 35V Z(-10℃)/Z(+20℃) 4 3 2 2 2 1 2 3 4 5 6 7 8 9 10 11 A±0.2 A 5.3 6.6 B 5.3 6.6 C 5.9 7.2 W 0.5 to 0.8 0.5 to 0.8 P 1.4 1.9 10 V LK ◆STANDARD RATINGS 16 25 35 15 16 17 18 ◆MARKING 9C 10 14 Please refer to "Product code guide (surface mount type)" EX) 35V10µF 6.3 13 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7µF:4R7,10µF:100,100µF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,25V:250) Series code Category P C±0.2 B±0.2 φD±0.5 0.3max. L±0.3 WV (Vdc) 12 E MLK AAA A RA AAA M AAA G W L 5.8 5.8 (at 20℃,120Hz) ◆PART NUMBERING SYSTEM ●Terminal Code : A D 5 6.3 (at 20℃, after 2 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 hours at 105℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value ◆DIMENSIONS [mm] Size code E61 F61 (at 20℃,120Hz) Cap (µF) Size code 47 100 33 22 47 33 4.7 10 10 22 E61 F61 E61 E61 F61 F61 E61 E61 F61 F61 Rated ripple current tanδ (mArms/ 105℃,120Hz) 0.32 0.32 0.28 0.26 0.26 0.16 0.14 0.14 0.14 0.14 36 60 35 30 50 48 19 25 30 42 ●Rated voltage symbol Rated voltage (Vdc) Symbol 6.3 j 10 A 16 C 25 E 35 V ◆RATED RIPPLE CURRENT MULTIPLIERS Part No. EMLK6R3ARA470ME61G EMLK6R3ARA101MF61G EMLK100ARA330ME61G EMLK160ARA220ME61G EMLK160ARA470MF61G EMLK250ARA330MF61G EMLK350ARA4R7ME61G EMLK350ARA100ME61G EMLK350ARA100MF61G EMLK350ARA220MF61G ・Frequency Multipliers Frequency(Hz) 6.3 to 35Vdc 120 1.00 1k 1.05 10k 1.08 100k 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MVL - Series 3000 to 5000-hours-life, 105℃ MVL ・Endurance : 3,000 to 5,000 hours at 105℃ ・Suitable for applications requiring long life such as continuously operating equipment, industrial applications, etc ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant Longer life MVJ ◆SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf Life Characteristics -40 to +105℃ 6.3 to 50Vdc (at 20℃,120Hz) ±20%(M) I=0.03CV or 4μA, whichever is greater Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃, after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V Max. tanδ 0.28 0.24 0.20 0.16 0.13 0.12 (at 20℃,120Hz) Rated voltage(Vdc) 6.3V 10V 16V 25V 35V 50V Z(-25℃)/Z(+20℃) 4 3 2 2 2 2 Z(-40℃)/Z(+20℃) 10 7 5 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for specified time at 105℃. D60 to F80：3,000 hours Time HA0 & JA0：5,000 hours Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value ◆DIMENSIONS [mm] ◆PART NUMBERING SYSTEM ●Terminal Code : A 1 P C±0.2 B±0.2 φD±0.5 W 0.3max. L±0.3 (Note) A±0.2 Note : L±0.5 for HA0 and JA0 A L D 5.7 4.3 4 5.7 5.3 5 6.3 5.7 6.6 6.3 7.7 6.6 8 10.0 8.3 10 10.0 10.3 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ◆MARKING 17 18 E MV L AAA A RA AAA M AAA G Vent for JA0 Size code D60 E60 F60 F80 HA0 JA0 2 B 4.3 5.3 6.6 6.6 8.3 10.3 C 5.1 5.9 7.2 7.2 9.0 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.0 1.4 1.9 1.9 3.1 4.5 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7µF:4R7,10µF:100) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,50V:500) Series code Category EX) 16V47µF 9hL 47 16V Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip 3000 to 5000-hours-life, 105℃ MVLSeries - ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (µF) Size code tanδ 22 47 100 220 330 1,000 33 220 10 22 47 100 470 33 47 100 330 D60 E60 F60 F80 HA0 JA0 E60 HA0 D60 E60 F60 F80 JA0 F60 F80 HA0 JA0 0.28 0.28 0.28 0.28 0.28 0.28 0.24 0.24 0.20 0.20 0.20 0.20 0.20 0.16 0.16 0.16 0.16 Rated ripple current (mArms/ 105℃, 120Hz) Part No. 22 36 60 101 160 313 35 141 18 30 50 81 254 48 63 116 238 EMVL6R3ARA220MD60G EMVL6R3ARA470ME60G EMVL6R3ARA101MF60G EMVL6R3ARA221MF80G EMVL6R3ARA331MHA0G EMVL6R3ARA102MJA0G EMVL100ARA330ME60G EMVL100ARA221MHA0G EMVL160ARA100MD60G EMVL160ARA220ME60G EMVL160ARA470MF60G EMVL160ARA101MF80G EMVL160ARA471MJA0G EMVL250ARA330MF60G EMVL250ARA470MF80G EMVL250ARA101MHA0G EMVL250ARA331MJA0G WV (Vdc) 35 50 Cap (µF) 4.7 10 22 33 220 1.0 2.2 3.3 4.7 10 22 33 47 100 Size code tanδ D60 E60 F60 F80 JA0 D60 D60 D60 E60 F60 F80 HA0 HA0 JA0 0.13 0.13 0.13 0.13 0.13 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 Rated ripple current (mArms/ 105℃, 120Hz) Part No. 15 25 42 57 216 6.2 11 14 19 30 49 77 92 151 EMVL350ARA4R7MD60G EMVL350ARA100ME60G EMVL350ARA220MF60G EMVL350ARA330MF80G EMVL350ARA221MJA0G EMVL500ARA1R0MD60G EMVL500ARA2R2MD60G EMVL500ARA3R3MD60G EMVL500ARA4R7ME60G EMVL500ARA100MF60G EMVL500ARA220MF80G EMVL500ARA330MHA0G EMVL500ARA470MHA0G EMVL500ARA101MJA0G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 1.0 2.2 to 10 22 to 1,000 120 1.00 1.00 1.00 1k 1.50 1.30 1.05 10k 1.75 1.40 1.08 100k 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip 2000-hours-life, 105℃ MVJ - MVL Series longer life MVJ ・Endurance : 2,000 hours at 105℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant longer life MVE ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 6.3 to 50Vdc (at 20℃, 120Hz) ±20% (M) I=0.01CV or 3μA, whichever is greater. Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tanδ (Max.) 0.30 0.24 0.20 0.16 0.14 0.12 (at 20℃, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V Z(-25℃)/Z(+20℃) 4 3 2 2 2 2 Z(-40℃)/Z(+20℃) 12 8 6 4 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours at 105℃. Rated voltage 6.3Vdc 10 & 16Vdc 25 to 50Vdc Capacitance change ≦±30% of the initial value ≦±25% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦300% of the initial specified value ≦300% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3Vdc 10 & 16Vdc 25 to 50Vdc Capacitance change ≦±30% of the initial value ≦±25% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦300% of the initial specified value ≦300% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] ◆PART NUMBERING SYSTEM ●Terminal Code : A 1 2 3 4 5 6 7 8 9 10 L 5.7 5.7 5.7 A±0.2 A 4.3 5.3 6.6 14 15 16 ◆MARKING 17 EX) 6.3V100µF 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7µF:4R7,10µF:100) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,50V:500) Series code Category P C±0.2 B±0.2 φD±0.5 0.3max. L±0.3 D 4 5 6.3 13 E MV J AAA A RA AAA M AAA G W Size code D60 E60 F60 11 12 B 4.3 5.3 6.6 C 5.1 5.9 7.2 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 P 1.0 1.4 1.9 7hJ 100 6.3V Please refer to "Product code guide (surface mount type)" ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 Cap (µF) Size code tanδ 22 47 100 33 10 22 47 33 D60 E60 F60 E60 D60 E60 F60 F60 0.30 0.30 0.30 0.24 0.20 0.20 0.20 0.16 Rated ripple current (mArms/ 105℃,120Hz) Part No. 21 36 56 34 16 30 48 45 EMVJ6R3ARA220MD60G EMVJ6R3ARA470ME60G EMVJ6R3ARA101MF60G EMVJ100ARA330ME60G EMVJ160ARA100MD60G EMVJ160ARA220ME60G EMVJ160ARA470MF60G EMVJ250ARA330MF60G WV (Vdc) 35 50 Cap (µF) 4.7 10 22 1.0 2.2 3.3 4.7 10 Size code tanδ D60 E60 F60 D60 D60 D60 E60 F60 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 Rated ripple current (mArms/ 105℃,120Hz) Part No. 15 25 40 5.6 10 14 19 29 EMVJ350ARA4R7MD60G EMVJ350ARA100ME60G EMVJ350ARA220MF60G EMVJ500ARA1R0MD60G EMVJ500ARA2R2MD60G EMVJ500ARA3R3MD60G EMVJ500ARA4R7ME60G EMVJ500ARA100MF60G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 1.0 2.2 to 10 22 to 100 120 1.00 1.00 1.00 1k 1.50 1.30 1.05 10k 1.75 1.40 1.08 100k 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip High heat resistance, 125℃ MHS - Series ・Downsizing, High capacitance ・Endurance : 5,000 hours at 125℃ ・For high temperature and high reliability applications (Base station equipment, etc) ・High temperature reflow soldering (3 times) ・Solvent resistant type(see PRECAUTIONS AND GUIDELINES) ・Vibration resistant structure ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125℃ 16 to 100Vdc (at 20℃, 120Hz) ±20%(M) I=0.03CV Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage(Vdc) 16V 25V 35V 50V 63V 80V 100V tanδ(Max.) 0.18 0.14 0.14 0.14 0.14 0.12 0.10 When nominal capacitance exceeds 1,000μF, add 0.02 to the value above for each 1,000μF increase. （at 20℃, 120Hz） Rated voltage(Vdc) 16V 25V 35V 50V 63V 80V 100V Z(-25℃)/Z(+20℃) 3 2 2 2 2 2 2 Z(-40℃)/Z(+20℃) 6 4 3 3 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 hours at 125℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : KE0 to MN0 ● Size code : KE0 to MN0 0.3max. Vent Vent W 0.3max. L±0.5 L±0.5 A±0.2 P C±0.2 B±0.2 φD±0.5 P C±0.2 B±0.2 φD±0.5 W Size code φD L A B C W KE0 12.5 13.5 13.0 13.0 13.7 1.0 to 1.3 KG5 12.5 16.0 13.0 13.0 13.7 1.0 to 1.3 LH0 16 16.5 17.0 17.0 18.0 1.0 to 1.3 LN0 16 21.5 17.0 17.0 18.0 1.0 to 1.3 MH0 18 16.5 19.0 19.0 20.0 1.0 to 1.3 MN0 18 21.5 19.0 19.0 20.0 1.0 to 1.3 P 4.2 4.2 6.5 6.5 6.5 6.5 A±0.2 : Dummy terminals ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 ◆MARKING 18 E MH S A A A A R A A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 470µF:471, 1,000µF:102) Taping code Terminal code (A, G) Voltage code (ex. 16V:160, 35V:350) Series code Category EX) 35V680µF 6d MHS 680 35V Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip - High heat resistance, 125℃ MHSSeries ◆STANDARD RATINGS WV (Vdc) 16 25 35 50 63 80 100 Cap (µF) Size code 1,500 2,000 2,700 3,600 4,700 6,200 1,000 1,300 1,800 2,400 3,300 4,300 680 820 1,200 1,500 2,000 2,400 360 470 560 750 1,000 1,300 240 330 430 560 680 910 180 240 270 360 430 560 110 150 160 200 240 330 KE0 KG5 LH0 MH0 LN0 MN0 KE0 KG5 LH0 MH0 LN0 MN0 KE0 KG5 LH0 MH0 LN0 MN0 KE0 KG5 LH0 MH0 LN0 MN0 KE0 KG5 LH0 MH0 LN0 MN0 KE0 KG5 LH0 MH0 LN0 MN0 KE0 KG5 LH0 MH0 LN0 MN0 ESR (Ω max./100kHz) 20℃ －40℃ Rated ripple current (mArms/125℃, 100kHz) Part No. 0.087 0.070 0.057 0.055 0.037 0.036 0.087 0.070 0.057 0.055 0.037 0.036 0.087 0.070 0.057 0.055 0.037 0.036 0.16 0.12 0.088 0.085 0.056 0.053 0.17 0.13 0.098 0.091 0.063 0.059 0.17 0.13 0.098 0.091 0.063 0.059 0.17 0.13 0.098 0.091 0.063 0.059 1.1 0.84 0.59 0.44 0.39 0.28 1.1 0.84 0.59 0.44 0.39 0.28 1.1 0.84 0.59 0.44 0.39 0.28 2.0 1.5 0.94 0.78 0.61 0.45 2.5 1.8 1.3 0.98 0.80 0.59 2.5 1.8 1.3 0.98 0.80 0.59 2.5 1.8 1.3 0.98 0.80 0.59 1,060 1,160 1,900 2,000 2,520 2,570 1,060 1,160 1,900 2,000 2,520 2,570 1,060 1,160 1,900 2,000 2,520 2,570 880 970 1,640 1,720 2,230 2,300 920 1,030 1,640 1,720 2,230 2,300 920 1,030 1,640 1,720 2,230 2,300 920 1,030 1,640 1,720 2,230 2,300 EMHS160□RA152MKE0S EMHS160□RA202MKG5S EMHS160□RA272MLH0S EMHS160□RA362MMH0S EMHS160□RA472MLN0S EMHS160□RA622MMN0S EMHS250□RA102MKE0S EMHS250□RA132MKG5S EMHS250□RA182MLH0S EMHS250□RA242MMH0S EMHS250□RA332MLN0S EMHS250□RA432MMN0S EMHS350□RA681MKE0S EMHS350□RA821MKG5S EMHS350□RA122MLH0S EMHS350□RA152MMH0S EMHS350□RA202MLN0S EMHS350□RA242MMN0S EMHS500□RA361MKE0S EMHS500□RA471MKG5S EMHS500□RA561MLH0S EMHS500□RA751MMH0S EMHS500□RA102MLN0S EMHS500□RA132MMN0S EMHS630□RA241MKE0S EMHS630□RA331MKG5S EMHS630□RA431MLH0S EMHS630□RA561MMH0S EMHS630□RA681MLN0S EMHS630□RA911MMN0S EMHS800□RA181MKE0S EMHS800□RA241MKG5S EMHS800□RA271MLH0S EMHS800□RA361MMH0S EMHS800□RA431MLN0S EMHS800□RA561MMN0S EMHS101□RA111MKE0S EMHS101□RA151MKG5S EMHS101□RA161MLH0S EMHS101□RA201MMH0S EMHS101□RA241MLN0S EMHS101□RA331MMN0S □ : Enter the appropriate terminal code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 10 to 200 240 to 560 680 to 2,000 2,400 to 4,300 4,700 to 6,200 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MVH - High heat resistance, 125℃ Upgrade! Series ・Lower ESR, Higher ripple current ・Endurance : 1,000 to 5,000 hours at 125℃ ・Suitable to fit for automotive equipment ・Solvent resistant type except 63 to 450Vdc (see PRECAUTIONS AND GUIDELINES) ・Vibration resistant structure ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. MVH 125℃ MVE ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125℃ 10 to 450Vdc (at 20℃, 120Hz) ±20% (M) Rated voltage (Vdc) 10 to 100Vdc 160 to 450Vdc F60 to JA0 I=0.01CV or 3μA, whichever is greater. I=0.04CV+100 KE0 to MN0 I=0.03CV or 4μA, whichever is greater. Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V 160 to 250V 400 & 450V F60 to JA0 0.24 0.20 0.16 0.14 0.14 0.12 0.12 0.10 tanδ (Max.) KE0 to MN0 0.22 0.18 0.16 0.14 0.12 0.14 0.10 0.20 0.24 When nominal capacitance exceeds 1,000μF, add 0.02 to the value above for each 1,000μF increase. (at 20℃, 120Hz) Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V 160 to 250V 400 & 450V Z(-25℃)/Z(+20℃) 3 2 2 2 2 2 2 2 F60 to JA0 Z(-40℃)/Z(+20℃) 6 4 4 3 3 3 3 3 Z(-25℃)/Z(+20℃) 4 3 2 2 2 2 2 3 6 KE0 to MN0 Z(-40℃)/Z(+20℃) 8 6 4 3 3 3 3 6 10 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for the specified time at 125℃. F60 to H63 (10 to 100Vdc) : 1,000hours HA0 to JA0 (10 to 100Vdc) : 2,000hours Time KE0 to MN0 (10 to 100Vdc) : 5,000hours KE0 to MN0 (160 to 450Vdc) : 2,000hours Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours (500 hours for 400 to 450Vdc) at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage(Vdc) 10 to 50Vdc 63 to 450Vdc Capacitance change ≦±30% of the initial value ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value ≦300% of the initial specified value Leakage current ≦The initial specified value ≦500% of the initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : F60 to MN0 ● Size code : F80, HA0 to MN0 0.3max. L±0.5 (Note) φD±0.5 P C±0.2 B±0.2 φD±0.5 W 0.3max. L±0.5 (Note) Note : L±0.3 for F80 A±0.2 W P C±0.2 Vent (Except F80, HA0) B±0.2 Vent (Except F60 to HA0) Note : L±0.3 for F60 and F80 A±0.2 : Dummy terminals C B A L Size code D 6.3 5.7 6.6 6.6 7.2 F60 6.3 7.7 6.6 6.6 7.2 F80 6.3 8.3 8.3 9.0 8 H63 8 10.0 8.3 8.3 9.0 HA0 10 10.0 10.3 10.3 11.0 JA0 12.5 13.5 13.0 13.0 13.7 KE0 12.5 16.0 13.0 13.0 13.7 KG5 16 16.5 17.0 17.0 18.0 LH0 16 21.5 17.0 17.0 18.0 LN0 18 16.5 19.0 19.0 20.0 MH0 18 21.5 19.0 19.0 20.0 MN0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 P 1.9 1.9 2.3 3.1 4.5 4.2 4.2 6.5 6.5 6.5 6.5 ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E MV H AAA A AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7µF:4R7,10µF:100) Taping·Tray code Terminal code (A, G) Voltage code (ex. 10V:100,50V:500, 100V: 101) Series code Category ◆MARKING F60 to JA0 EX) 35V47µF 74H 47 35V KE0 to MN0 EX) 16V1,000µF 0V MVH 1000 16V Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip - MVHSeries Upgrade! ◆STANDARD RATINGS is not solvent resistant (63 to 450Vdc). WV Cap (Vdc) (µF) Size code ESR Rated ripple (Ω max./ current 100kHz) (mArms/125℃) 100 100 220 220 220 330 330 470 1,000 2,200 2,200 3,300 4,700 47 100 220 220 330 470 680 680 1,000 2,200 33 47 47 100 100 100 220 220 330 330 470 470 680 680 1,000 10 22 33 33 47 47 47 100 100 220 330 330 470 470 680 10 10 22 22 F80 H63 F80 H63 HA0 HA0 JA0 JA0 KE0 LH0 MH0 MH0 MN0 F60 HA0 HA0 JA0 JA0 KE0 KE0 LH0 MH0 MH0 F60 F80 H63 F80 H63 HA0 HA0 JA0 JA0 KE0 KE0 LH0 LH0 MH0 MN0 F60 F60 F80 H63 F80 H63 HA0 HA0 JA0 JA0 KE0 LH0 KG5 LH0 MH0 F60 H63 F80 H63 0.90 0.90 0.90 0.90 0.40 0.40 0.30 0.30 0.14 0.10 0.10 0.10 0.058 1.6 0.40 0.40 0.30 0.30 0.14 0.14 0.10 0.10 0.10 1.6 0.90 0.90 0.90 0.90 0.40 0.40 0.30 0.30 0.14 0.14 0.10 0.10 0.10 0.058 1.6 1.6 0.90 0.90 0.90 0.90 0.40 0.40 0.30 0.30 0.14 0.10 0.11 0.10 0.10 2.8 1.6 2.0 1.6 Part No. WV Cap (Vdc) (µF) Size code ESR Rated ripple (Ω max./ current 100kHz) (mArms/125℃) 33 33 33 47 47 100 100 220 220 330 330 470 10 10 22 33 33 47 47 100 220 330 470 10 22 22 33 33 47 10 22 22 33 47 68 100 220 10 22 33 68 10 22 33 33 47 10 22 22 33 4.7 6.8 10 10 3.3 4.7 10 F80 H63 HA0 HA0 JA0 JA0 KE0 KE0 LH0 KG5 LH0 MH0 F80 H63 HA0 HA0 JA0 HA0 JA0 KE0 KG5 LH0 LN0 HA0 HA0 JA0 HA0 JA0 JA0 HA0 HA0 JA0 JA0 KE0 KG5 LH0 MN0 KE0 LH0 MH0 MN0 KE0 LH0 LN0 MH0 MN0 KG5 LN0 MH0 MN0 KE0 LH0 LN0 MH0 KG5 LH0 MN0 2.0 1.6 0.70 0.70 0.50 0.50 0.23 0.23 0.15 0.18 0.15 0.15 2.0 2.0 0.70 0.70 0.50 0.70 0.50 0.25 0.20 0.18 0.11 0.75 0.75 0.55 0.75 0.55 0.55 0.75 0.75 0.55 0.55 0.33 0.26 0.24 0.16 － － － － － － － － － － － － － － － － － － － － 20℃ -40℃ 100kHz 120Hz 10 16 25 35 50 High heat resistance, 125℃ 14.0 14.0 14.0 14.0 6.0 6.0 4.5 4.5 2.1 1.5 1.5 1.5 0.87 24.0 6.0 6.0 4.5 4.5 2.1 2.1 1.5 1.5 1.5 24.0 14.0 14.0 14.0 14.0 6.0 6.0 4.5 4.5 2.1 2.1 1.5 1.5 1.5 0.87 24.0 24.0 14.0 14.0 14.0 14.0 6.0 6.0 4.5 4.5 2.1 1.5 1.5 1.5 1.5 42.0 30.0 30.0 30.0 110 110 110 110 220 220 296 296 750 1,000 1,200 1,200 1,550 69 220 220 296 296 750 750 1,000 1,200 1,200 69 110 110 110 110 220 220 296 296 750 750 1,000 1,000 1,200 1,550 69 69 110 110 110 110 220 220 296 296 750 1,000 900 1,000 1,200 51 83 83 83 － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － Part No. 20℃ -40℃ 100kHz 120Hz EMVH100□RA101MF80G EMVH100ARA101MH63G EMVH100□RA221MF80G EMVH100ARA221MH63G EMVH100□RA221MHA0G EMVH100□RA331MHA0G EMVH100□RA331MJA0G EMVH100□RA471MJA0G EMVH100□RA102MKE0S EMVH100□RA222MLH0S EMVH100□RA222MMH0S EMVH100□RA332MMH0S EMVH100□RA472MMN0S EMVH160ARA470MF60G EMVH160□RA101MHA0G EMVH160□RA221MHA0G EMVH160□RA221MJA0G EMVH160□RA331MJA0G EMVH160□RA471MKE0S EMVH160□RA681MKE0S EMVH160□RA681MLH0S EMVH160□RA102MMH0S EMVH160□RA222MMH0S EMVH250ARA330MF60G EMVH250□RA470MF80G EMVH250ARA470MH63G EMVH250□RA101MF80G EMVH250ARA101MH63G EMVH250□RA101MHA0G EMVH250□RA221MHA0G EMVH250□RA221MJA0G EMVH250□RA331MJA0G EMVH250□RA331MKE0S EMVH250□RA471MKE0S EMVH250□RA471MLH0S EMVH250□RA681MLH0S EMVH250□RA681MMH0S EMVH250□RA102MMN0S EMVH350ARA100MF60G EMVH350ARA220MF60G EMVH350□RA330MF80G EMVH350ARA330MH63G EMVH350□RA470MF80G EMVH350ARA470MH63G EMVH350□RA470MHA0G EMVH350□RA101MHA0G EMVH350□RA101MJA0G EMVH350□RA221MJA0G EMVH350□RA331MKE0S EMVH350□RA331MLH0S EMVH350□RA471MKG5S EMVH350□RA471MLH0S EMVH350□RA681MMH0S EMVH500ARA100MF60G EMVH500ARA100MH63G EMVH500□RA220MF80G EMVH500ARA220MH63G 50 63 80 100 160 200 250 400 450 30.0 83 30.0 83 11.0 160 11.0 160 7.5 247 7.5 247 3.5 550 3.5 550 2.3 850 2.7 700 2.3 850 2.3 920 100 60 110 60 35.0 100 35.0 100 25.0 170 35.0 100 25.0 170 12.5 500 10.0 600 9.0 820 5.5 1,100 50.0 70 50.0 70 35.0 115 50.0 70 35.0 115 35.0 115 50.0 70 50.0 70 35.0 115 35.0 115 16.5 450 13.0 550 12.0 650 8.0 950 － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － 100 180 245 380 100 180 250 245 315 110 200 205 260 70 100 140 135 65 85 145 EMVH500□RA330MF80G EMVH500ARA330MH63G EMVH500□RA330MHA0G EMVH500□RA470MHA0G EMVH500□RA470MJA0G EMVH500□RA101MJA0G EMVH500□RA101MKE0S EMVH500□RA221MKE0S EMVH500□RA221MLH0S EMVH500□RA331MKG5S EMVH500□RA331MLH0S EMVH500□RA471MMH0S EMVH630□RA100MF80G EMVH630ARA100MH63G EMVH630□RA220MHA0G EMVH630□RA330MHA0G EMVH630□RA330MJA0G EMVH630□RA470MHA0G EMVH630□RA470MJA0G EMVH630□RA101MKE0S EMVH630□RA221MKG5S EMVH630□RA331MLH0S EMVH630□RA471MLN0S EMVH800□RA100MHA0G EMVH800□RA220MHA0G EMVH800□RA220MJA0G EMVH800□RA330MHA0G EMVH800□RA330MJA0G EMVH800□RA470MJA0G EMVH101□RA100MHA0G EMVH101□RA220MHA0G EMVH101□RA220MJA0G EMVH101□RA330MJA0G EMVH101□RA470MKE0S EMVH101□RA680MKG5S EMVH101□RA101MLH0S EMVH101□RA221MMN0S EMVH161□RA100MKE0S EMVH161□RA220MLH0S EMVH161□RA330MMH0S EMVH161□RA680MMN0S EMVH201□RA100MKE0S EMVH201□RA220MLH0S EMVH201□RA330MLN0S EMVH201□RA330MMH0S EMVH201□RA470MMN0S EMVH251□RA100MKG5S EMVH251□RA220MLN0S EMVH251□RA220MMH0S EMVH251□RA330MMN0S EMVH401□RA4R7MKE0S EMVH401□RA6R8MLH0S EMVH401□RA100MLN0S EMVH401□RA100MMH0S EMVH451□RA3R3MKG5S EMVH451□RA4R7MLH0S EMVH451□RA100MMN0S □ : Enter the appropriate terminal code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Rated voltage (Vdc) Size code F60 to JA0 10 to 100 KE0 to MN0 160 to 450 KE0 to MN0 Capacitance(µF) Frequency(Hz) 10 22 to 470 47 to 100 220 to 470 680 to 1,000 2,200 to 3,300 4,700 3.3 to 33 47 to 68 120 0.66 0.93 0.40 0.50 0.60 0.75 0.85 1.00 1.00 1k 0.86 0.97 0.75 0.85 0.87 0.90 0.95 1.50 1.30 10k 0.93 1.00 0.90 0.94 0.95 0.95 0.98 1.75 1.40 100k 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.80 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MHL - High heat resistance, 125℃ Upgrade! Series ・Downsized and Longer life from current MVH series ・Endurance : 2,000 to 4,000 hours at 125℃ ・Rated voltage range : 10 to 35V. Nominal capacitance range : 47 to 680µF ・For automobile modules and other high temperature applications ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・Vibration resistant structure ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. MHL Downsized Longer life MVH ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125℃ 10 to 35Vdc (at 20℃, 120Hz) ±20%(M) I=0.01CV Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage(Vdc) 10V 16V 25V 35V tanδ(Max.) 0.24 0.20 0.16 0.14 (at 20℃, 120Hz) Rated voltage(Vdc) 10V 16V 25V 35V Z(-25℃)/Z(+20℃) 3 2 2 2 Z(-40℃)/Z(+20℃) 6 4 4 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for specified time at 125℃. F61 & F80 ：2,000 hours Time HA0 & JA0：4,000 hours Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : F61 to JA0 ● Size code : F61 to JA0 Vent for JA0 Vent for JA0 0.3max. W 0.3max. L±0.3 (Note) L±0.3 (Note) Note : L±0.5 for HA0 and JA0 A±0.2 Note : L±0.5 for HA0 and JA0 2 3 4 5 6 7 8 9 10 11 12 B 6.6 6.6 8.3 10.3 C 7.2 7.2 9.0 11.0 W 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.9 1.9 3.1 4.5 A±0.2 : Dummy terminals ◆PART NUMBERING SYSTEM 1 P C±0.2 B±0.2 φD±0.5 P C±0.2 B±0.2 φD±0.5 W L A Size code φD 6.3 5.8 6.6 F61 6.3 7.7 6.6 F80 8 10.0 8.3 HA0 10 10.0 10.3 JA0 13 14 15 16 17 ◆MARKING 18 E MH L A A A A R A A A A M A A A G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Taping code Terminal code (A, G) Voltage code (ex. 35V:350) Series code Category EX) 35V47µF 2Q 47 V HL ●Rated voltage symbol Rated voltage (Vdc) Symbol A 10 C 16 E 25 V 35 Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip High heat resistance, 125℃ MHLSeries Upgrade! - ◆STANDARD RATINGS WV (Vdc) 10 16 25 35 Cap (µF) Size code 100 220 330 470 680 47 100 220 330 470 680 47 100 220 330 47 100 220 330 F61 F80 HA0 HA0 JA0 F61 F61 F80 HA0 JA0 JA0 F61 F80 HA0 JA0 F61 F80 HA0 JA0 ESR (Ω max./100kHz) 20℃ -40℃ 1.2 0.60 0.30 0.30 0.20 1.2 1.2 0.60 0.30 0.20 0.20 1.2 0.60 0.30 0.20 1.2 0.60 0.30 0.20 22 12 5.5 5.5 3.6 22 22 12 5.5 3.6 3.6 22 12 5.5 3.6 22 12 5.5 3.6 Rated ripple current (mArms/125℃, 100kHz) 110 220 296 296 440 110 110 220 296 440 440 110 220 296 440 110 220 296 440 Part No. EMHL100 □ RA101MF61G EMHL100 □ RA221MF80G EMHL100 □ RA331MHA0G EMHL100 □ RA471MHA0G EMHL100 □ RA681MJA0G EMHL160 □ RA470MF61G EMHL160 □ RA101MF61G EMHL160 □ RA221MF80G EMHL160 □ RA331MHA0G EMHL160 □ RA471MJA0G EMHL160 □ RA681MJA0G EMHL250 □ RA470MF61G EMHL250 □ RA101MF80G EMHL250 □ RA221MHA0G EMHL250 □ RA331MJA0G EMHL350 □ RA470MF61G EMHL350 □ RA101MF80G EMHL350 □ RA221MHA0G EMHL350 □ RA331MJA0G □ : Enter the appropriate terminal code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 47 to 680 120 0.93 1k 0.97 10k 1.00 100k 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MHB - High heat resistance, 125℃ MHJ Series Lower ESR ・ESR : Less than MVH MHB ・Endurance : 1,500 to 3,000 hours at 125℃ ・Rated voltage range : 10 to 100V Lower ESR ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) MVH ・Vibration resistant structure ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125℃ 10 to 100Vdc (at 20℃, 120Hz) ±20%(M) HA0 & JA0 I=0.01CV KE0 to MN0 I=0.03CV Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃ after 2 minutes) 10V 16V 25V 35V 50V 63V 80V 100V Rated Voltage (Vdc) HA0 & JA0 0.24 0.20 0.16 0.14 － － － － tanδ (Max.) KE0 to MN0 0.14 0.12 0.10 0.10 0.08 0.08 － － When nominal capacitance exceeds 1,000μF, add 0.02 to the value above for each 1,000μF increase. (at 20℃, 120Hz) Rated Voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V Z(-25℃)/Z(+20℃) 3 2 2 2 － － － － HA0 & JA0 Z(-40℃)/Z(+20℃) 4 3 3 3 － － － － Z(-25℃)/Z(+20℃) 2 2 2 2 2 2 － － KE0 to MN0 4 4 4 4 4 4 (at 120Hz) Z(-40℃)/Z(+20℃) － － The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours at 125℃. Capacitance change ≦±30% of the initial value HA0 & JA0 D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125℃. KE0 & KG5 ：1,500hours Time LH0 & MH0 ：2,000hours KE0 to MN0 KN0 & LN0 & MN0：3,000hours Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : HA0 to MN0 ● Size code : HA0 to MN0 0.3max. L±0.5 φD±0.5 P C±0.2 B±0.2 φD±0.5 W 0.3max. L±0.5 A±0.2 W P C±0.2 Vent (Except HA0) B±0.2 Vent (Except HA0) A±0.2 Size code HA0 JA0 KE0 KG5 KN0 LH0 LN0 MH0 MN0 L φD 8 10.0 10 10.0 12.5 13.5 12.5 16.0 12.5 21.5 16 16.5 16 21.5 18 16.5 18 21.5 A 8.3 10.3 13.0 13.0 13.0 17.0 17.0 19.0 19.0 B 8.3 10.3 13.0 13.0 13.0 17.0 17.0 19.0 19.0 C 9.0 11.0 13.7 13.7 13.7 18.0 18.0 20.0 20.0 W 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 P 3.1 4.5 4.2 4.2 4.2 6.5 6.5 6.5 6.5 : Dummy terminals ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 ◆MARKING 18 E MHB AAA A DA AAA M AAA G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Taping·Tray code Terminal code (A, G) Voltage code (ex. 35V:350,100V:101) Series code Category Please refer to "Product code guide (surface mount type)" KE0 to MN0 EX) 35V1,000µF HA0, JA0 EX) 16V220µF 2A MHB 5J 1000 35V 220 CHB ●Rated voltage symbol (HA0, JA0) Rated voltage (Vdc) Symbol 10 A 16 C 25 E 35 V Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip - High heat resistance, 125℃ MHBSeries ◆STANDARD RATINGS WV (Vdc) 10 16 25 35 50 63 80 100 Cap (µF) Size code 330 470 100 220 100 220 330 820 1,100 (1,500) 1,600 2,200 2,700 3,300 47 100 100 220 560 680 (910) 1,000 1,300 1,600 2,200 270 360 (470) 510 680 820 1,100 200 270 (330) 360 470 560 750 130 160 (220) 240 330 390 510 75 100 (130) 130 180 220 300 HA0 JA0 HA0 HA0 HA0 HA0 JA0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 HA0 HA0 JA0 JA0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 ESR(End of life) (Ω max.) ESR(Initial) (Ω max./100k to 400kHz) 100kHz 400kHz 20℃ -40℃ 20℃ -40℃ -40℃ 0.3 0.2 0.3 0.3 0.3 0.3 0.2 0.060 0.056 (0.044) 0.047 0.045 0.034 0.032 0.3 0.3 0.2 0.2 0.060 0.056 (0.044) 0.047 0.045 0.034 0.032 0.11 0.10 (0.076) 0.087 0.087 0.050 0.050 0.22 0.17 (0.13) 0.15 0.12 0.085 0.070 0.22 0.17 (0.13) 0.15 0.12 0.085 0.070 0.28 0.21 (0.17) 0.18 0.15 0.11 0.091 3.0 2.0 3.0 3.0 3.0 3.0 2.0 0.30 0.28 (0.22) 0.24 0.23 0.17 0.16 3.0 3.0 2.0 2.0 0.30 0.28 (0.22) 0.24 0.23 0.17 0.16 0.55 0.50 (0.38) 0.44 0.44 0.25 0.25 1.54 1.19 (0.94) 1.05 0.84 0.58 0.49 1.54 1.19 (0.94) 1.05 0.84 0.58 0.49 2.24 1.68 (1.32) 1.44 1.20 0.88 0.73 – – – – – – – 0.30 0.28 (0.18) 0.24 0.23 0.10 0.090 – – – – 0.30 0.28 (0.18) 0.24 0.23 0.10 0.090 0.55 0.50 (0.38) 0.44 0.44 0.25 0.25 0.88 0.68 (0.53) 0.60 0.48 0.19 0.19 0.88 0.68 (0.53) 0.60 0.48 0.19 0.19 1.1 0.84 (0.66) 0.72 0.60 0.25 0.22 – – – – – – – 3.7 3.4 (2.2) 2.9 2.8 1.3 0.60 – – – – 3.7 3.4 (2.2) 2.9 2.8 1.3 0.60 6.6 6.0 (4.6) 5.2 5.2 3.0 3.0 14 11 (8.5) 9.6 7.7 3.0 3.0 14 11 (8.5) 9.6 7.7 3.0 3.0 22 17 (13) 14 12 3.9 3.9 6.0 4.5 6.0 6.0 6.0 6.0 4.5 – – – – – – – 6.0 6.0 4.5 4.5 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – Rated ripple current (mArms/125℃, 100k to 400kHz) Part No. 240 330 240 240 240 240 330 1,320 1,470 (1,620) 1,820 2,000 2,280 2,490 240 240 330 330 1,320 1,470 (1,620) 1,820 2,000 2,280 2,490 980 1,090 (1,200) 1,320 1,420 2,040 2,240 540 650 (830) 780 940 1,790 1,910 540 650 (830) 780 940 1,790 1,910 480 580 (740) 720 840 1,580 1,690 EMHB100 □ RA331MHA0G EMHB100 □ RA471MJA0G EMHB160 □ RA101MHA0G EMHB160 □ RA221MHA0G EMHB250 □ RA101MHA0G EMHB250 □ RA221MHA0G EMHB250 □ RA331MJA0G EMHB250 □ RA821MKE0S EMHB250 □ RA112MKG5S (EMHB250 □ TR152MKN0S) EMHB250 □ RA162MLH0S EMHB250 □ RA222MMH0S EMHB250 □ RA272MLN0S EMHB250 □ RA332MMN0S EMHB350 □ RA470MHA0G EMHB350 □ RA101MHA0G EMHB350 □ RA101MJA0G EMHB350 □ RA221MJA0G EMHB350 □ RA561MKE0S EMHB350 □ RA681MKG5S (EMHB350 □ TR911MKN0S) EMHB350 □ RA102MLH0S EMHB350 □ RA132MMH0S EMHB350 □ RA162MLN0S EMHB350 □ RA222MMN0S EMHB500 □ RA271MKE0S EMHB500 □ RA361MKG5S (EMHB500 □ TR471MKN0S) EMHB500 □ RA511MLH0S EMHB500 □ RA681MMH0S EMHB500 □ RA821MLN0S EMHB500 □ RA112MMN0S EMHB630 □ RA201MKE0S EMHB630 □ RA271MKG5S (EMHB630 □ TR331MKN0S) EMHB630 □ RA361MLH0S EMHB630 □ RA471MMH0S EMHB630 □ RA561MLN0S EMHB630 □ RA751MMN0S EMHB800 □ RA131MKE0S EMHB800 □ RA161MKG5S (EMHB800 □ TR221MKN0S) EMHB800 □ RA241MLH0S EMHB800 □ RA331MMH0S EMHB800 □ RA391MLN0S EMHB800 □ RA511MMN0S EMHB101 □ RA750MKE0S EMHB101 □ RA101MKG5S (EMHB101 □ TR131MKN0S) EMHB101 □ RA131MLH0S EMHB101 □ RA181MMH0S EMHB101 □ RA221MLN0S EMHB101 □ RA301MMN0S □ : Enter the appropriate terminal code. ( ) :Second standard ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) Size code Capacitance(µF) HA0 to JA0 47 to 470 75 to 200 220 to 560 KE0 to MN0 680 to 1,600 2,200 to 3,300 120 0.93 0.40 0.50 0.60 0.75 1k 0.97 0.75 0.85 0.87 0.90 10k 1.00 0.90 0.94 0.95 0.95 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MHJ - High heat resistance, 125℃ Upgrade! Series MHK Lower ESR ・Endurance : 2,000 to 3,000 hours at 125℃ ・Rated voltage range : 10 to 35V ・Nominal capacitance range : 47 to 470µF ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・Vibration resistant structure ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. MHJ Lower ESR MHB ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125℃ 10 to 35Vdc (at 20℃, 120Hz) ±20%(M) I=0.01CV Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage(Vdc) 10V 16V 25V 35V tanδ(Max.) 0.30 0.23 0.18 0.16 (at 20℃, 120Hz) Rated voltage(Vdc) 10V 16V 25V 35V Z(-25℃)/Z(+20℃) 3 2 2 2 Z(-40℃)/Z(+20℃) 4 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 3,000 hours (2,000 hours for F80 size) at 125℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value F80 HA0 JA0 ESR after 2,000 hours 20℃ 3.5 0.60 0.40 (Ω max./100kHz) -40℃ 40 4.5 3.5 The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : F80 to JA0 ● Size code : F80 to JA0 Vent for JA0 Vent for JA0 0.3max. L±0.5 (Note) Note : L±0.3 for F80 A±0.2 Note : L±0.3 for F80 3 4 5 6 7 8 9 W 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.9 3.1 4.5 A±0.2 : Dummy terminals ◆PART NUMBERING SYSTEM 2 C B A L φD 6.3 7.7 6.6 6.6 7.2 8 10.0 8.3 8.3 9.0 10 10.0 10.3 10.3 11.0 P C±0.2 B±0.2 φD±0.5 P C±0.2 B±0.2 φD±0.5 W 0.3max. L±0.5 (Note) 1 Size code F80 HA0 JA0 W 10 11 12 13 14 15 16 17 ◆MARKING 18 E MH J A A A A R A A A A M A A A G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470, 100µF:101) Taping code Terminal code (A, G) Voltage code (ex. 16V:160, 35V:350) Series code Category EX) 16V100µF 5j 100 CHJ ● Rated voltage symbol Rated voltage (Vdc) Symbol A 10 C 16 E 25 V 35 Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip High heat resistance, 125℃ MHJSeries Upgrade! - ◆STANDARD RATINGS WV (Vdc) 10 16 25 35 Cap (µF) Size code 220 330 330 470 100 100 220 330 470 100 220 330 47 47 100 220 HA0 HA0 JA0 JA0 F80 HA0 HA0 JA0 JA0 HA0 JA0 JA0 F80 HA0 HA0 JA0 ESR (Ω max./100kHz) 20℃ －40℃ Rated ripple current (mArms/125℃, 100kHz) Part No. 0.15 0.15 0.12 0.12 0.45 0.15 0.15 0.12 0.12 0.15 0.12 0.12 0.45 0.15 0.15 0.12 3.0 3.0 2.0 2.0 5.0 3.0 3.0 2.0 2.0 3.0 2.0 2.0 5.0 3.0 3.0 2.0 350 350 550 550 220 350 350 550 550 350 550 550 220 350 350 550 EMHJ100□RA221MHA0G EMHJ100□RA331MHA0G EMHJ100□RA331MJA0G EMHJ100□RA471MJA0G EMHJ160□RA101MF80G EMHJ160□RA101MHA0G EMHJ160□RA221MHA0G EMHJ160□RA331MJA0G EMHJ160□RA471MJA0G EMHJ250□RA101MHA0G EMHJ250□RA221MJA0G EMHJ250□RA331MJA0G EMHJ350□RA470MF80G EMHJ350□RA470MHA0G EMHJ350□RA101MHA0G EMHJ350□RA221MJA0G □ : Enter the appropriate terminal code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 47 to 100 220 to 470 120 0.40 0.50 1k 0.75 0.85 10k 0.90 0.94 100k 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MHK - High heat resistance, 125℃ Upgrade! Series ・Endurance : 2,000 hours at 125℃ ・Specified ESR after endurance ・For automobile modules and other high temperature applications ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. MHK Lower ESR MHJ ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125℃ 35Vdc (at 20℃, 120Hz) ±20%(M) I=0.01CV Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃ after 2 minute) Rated voltage(Vdc) 35V tanδ (Max.) 0.14 (at 20℃, 120Hz) Rated voltage(Vdc) 35V Z(-25℃)/Z(+20℃) 2 Z(-40℃)/Z(+20℃) 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours at 125℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value F80 6.0 ESR（Ω max./-40℃, 400kHz） HA0 4.5 The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf life ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : F80, HA0 ● Size code : F80, HA0 0.3max. W 0.3max. L±0.3 (Note) L±0.3 (Note) Note : L±0.5 for HA0 A±0.2 Note : L±0.5 for HA0 Size code F80 HA0 D 6.3 8 L 7.7 10.0 P C±0.2 B±0.2 φD±0.5 P C±0.2 B±0.2 φD±0.5 W A±0.2 : Dummy terminals A 6.6 8.3 B 6.6 8.3 C 7.2 9.0 W 0.5 to 0.8 0.7 to 1.1 P 1.9 3.1 ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 E MH K 3 5 0 A R A 11 12 13 14 15 16 17 18 M F80 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Taping code Terminal code Voltage code (ex.35V:350) Series code Category ◆MARKING EX) 35V47µF ●Rated voltage symbol 3A Rated voltage (Vdc) Symbol 35 V 47 V HK Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip High heat resistance, 125℃ MHKSeries Upgrade! - ◆STANDARD RATINGS WV (Vdc) Cap (µF) Size code 35 47 100 220 F80 F80 HA0 ESR （Ω max./100k to 400kHz) 20℃ -40℃ 0.30 0.30 0.20 3.0 3.0 2.0 Rated ripple current (mArms/125℃, 100k to 400kHz) Part No. 240 240 330 EMHK350□RA470MF80G EMHK350□RA101MF80G EMHK350□RA221MHA0G ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 47 to 100 220 120 0.40 0.50 1k 0.75 0.85 10k 0.90 0.94 100k 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip High heat resistance, 150℃ MXB - Series ・Endurance : 1,000 hours at 150℃ ・Rated voltage range : 25 & 35V, Nominal capacitance range : 330 to 2,400μF ・For automobile modules and other high temperature applications. ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES). ・Vibration resistant structure. ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. MXB 150 ℃ MVH ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +150℃ 25, 35Vdc (at 20℃, 120Hz) ±20%(M) I=0.03CV Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage(Vdc) 25V 35V tanδ(Max.) 0.16 0.14 When nominal capacitance exceeds 1,000μF, add 0.02 to the value above for each 1,000μF increase. （at 20℃, 120Hz） Rated voltage(Vdc) 25V 35V Z(-25℃)/Z(+20℃) 2 2 Z(-40℃)/Z(+20℃) 4 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 1,000 hours at 150℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 150℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : KE0 to MN0 ● Size code : KE0 to MN0 0.3max. Vent Vent W 0.3max. L±0.5 L±0.5 A±0.2 P C±0.2 B±0.2 φD±0.5 P C±0.2 B±0.2 φD±0.5 W Size code φD L A B C W KE0 12.5 13.5 13.0 13.0 13.7 1.0 to 1.3 KG5 12.5 16.0 13.0 13.0 13.7 1.0 to 1.3 LH0 16 16.5 17.0 17.0 18.0 1.0 to 1.3 LN0 16 21.5 17.0 17.0 18.0 1.0 to 1.3 MH0 18 16.5 19.0 19.0 20.0 1.0 to 1.3 MN0 18 21.5 19.0 19.0 20.0 1.0 to 1.3 P 4.2 4.2 6.5 6.5 6.5 6.5 A±0.2 : Dummy terminals ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 ◆MARKING 18 E MX B A A A A R A A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 560µF:561, 1,000µF:102) Taping code Terminal code (A, G) Voltage code (ex. 25V:250, 35V:350) Series code Category EX) 35V330µF 87 MXB 330 35V Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip - High heat resistance, 150℃ MXBSeries ◆STANDARD RATINGS WV (Vdc) 25 35 Cap (µF) Size code 560 750 1,000 1,500 1,800 2,400 330 390 560 750 910 1,200 KE0 KG5 LH0 MH0 LN0 MN0 KE0 KG5 LH0 MH0 LN0 MN0 ESR (Ω max./100kHz) 20℃ －40℃ Rated ripple current (mArms/150℃, 100kHz) Part No. 0.14 0.11 0.10 0.10 0.058 0.058 0.27 0.21 0.16 0.13 0.10 0.084 2.1 1.5 1.5 1.5 0.87 0.87 8.1 6.3 4.8 3.9 3.0 1.7 860 1,000 1,120 1,210 1,460 1,560 670 800 920 1,000 1,260 1,320 EMXB250□RA561MKE0S EMXB250□RA751MKG5S EMXB250□RA102MLH0S EMXB250□RA152MMH0S EMXB250□RA182MLN0S EMXB250□RA242MMN0S EMXB350□RA331MKE0S EMXB350□RA391MKG5S EMXB350□RA561MLH0S EMXB350□RA751MMH0S EMXB350□RA911MLN0S EMXB350□RA122MMN0S □ : Enter the appropriate terminal code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 330 to 560 750 to 1,800 2,400 120 0.50 0.60 0.75 1k 0.85 0.87 0.90 10k 0.94 0.95 0.95 100k 1.00 1.00 1.00 Please contact us for lifetime estimation. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS MKB TM AIchip Low ESR, 105℃ - Series ・Low ESR ・Endurance : 3,000 hours at 105℃ ・Rated voltage 400V, Capacitance 2.2 to 4.7µF ・Vibration resistant structure ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 400Vdc (at 20℃, 120Hz) ±20%(M) I=0.04CV+100(max.) Where, I : Max. leakage current (μA), C : Nominal capacitance (μF), V : Rated voltage (V) (at 20℃ after 1 minute) Rated voltage(Vdc) 400V tanδ (Max.) 0.25 (at 20℃, 120Hz) Rated voltage(Vdc) 400V Z(-25℃)/Z(+20℃) 6 Z(-40℃)/Z(+20℃) 10 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 3,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. impedance Ratio) Endurance Shelf life ◆MARKING ◆DIMENSIONS [mm] ● Terminal Code : G(Vibration resistant structure) Vent 0.3max. L±0.5 Size code HA0 JA0 D 8 10 0.3max. φD±0.5 P Ｃ±0.2 Ｂ±0.2 φD±0.5 W A±0.2 W 0.7 to 1.1 0.7 to 1.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ●Rated voltage symbol Rated voltage (Vdc) Symbol 400 2G : Dummy terminals P 3.1 4.5 ◆PART NUMBERING SYSTEM 1 6A 3.9 2GKB A±0.2 L±0.5 L A B C 10.0 8.3 8.3 9.0 10.0 10.3 10.3 11.0 EX) 400V3.9µF W B±0.2 Vent P C±0.2 ● Terminal Code : A ◆RATED RIPPLE CURRENT MULTIPLIERS 17 ・Frequency Multipliers 18 E MK B 4 0 1 A R A A A A M A A A G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 2.2µF:2R2) Taping code Terminal code (A, G) Voltage code Series code Category Frequency(Hz) 400Vdc 120 1.00 1k 1.30 10k 1.40 100k 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Please refer to "Product code guide (surface mount type)" ◆STANDARD RATINGS WV (Vdc) Cap (µF) Size code 400 2.2 3.3 3.9 4.7 HA0 JA0 JA0 JA0 ESR (Ω max./120Hz) 20℃ -40℃ 20 10 10 10 1,000 500 500 500 Rated ripple current (mArms/105℃,120Hz) Part No. 26 37 38 39 EMKB401□RA2R2MHA0G EMKB401□RA3R3MJA0G EMKB401□RA3R9MJA0G EMKB401□RA4R7MJA0G □ : Enter the appropriate terminal code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart PART NUMBERING SYSTEM Product code guide (Radial lead type) (Example : KMQ series, 450V-100µF, φ18×40L, Long lead with bulk) Please refer to the following table Contents Code Series Code Type Code Tol.(%) Code Polar E B KMQ KMQ Radial lead E M KY KY- ±20 -10 to +20 Bi-polar Sleeve materia V Terminal plating Code material Sn-Bi PET Sleeveless (Coating case) 7 8 9 10 11 12 13 14 15 16 17 18 KMQ 4 5 1 E L L 1 0 1 M M 40 S Series code Voltage code Terminal code Lead forming/ Taping code Capacitance code 1 2 E Category 3 4 5 6 Voltage(V) Code Capacitance tolerance Size code φD(mm) Code S Sn-Bi Sn G H Supplement code L(mm) Code Contents Code Cap.(µF) Code 6.3 6R3 Long Lead LL 1R0 5 E 10 100 Cut(3.5mm) C3 1.0 4.7 4R7 F 9 11 H J 11.5 B5 12.5 C5 25 250 100 101 250 251 Type Lead forming (Bulk) Cut(5.0mm) Forming Cut 10 100 FC 47 470 10 09 11 IJ 100 101 12.5 K 13 13 Snap-inφD=5 to 8 FM 470 471 14.5 U 15 15 Snap-inφD=10 to 18 MC 1,000 102 16 L 16 16 18 M 20 20 25 25 BC Horizontal BD Straight Taping C5 6.3 8 Gradual forming TD 30 30 31.5 N3 Straight(Skip a hole) TE 35 35 Forming(F=5.0mm) TC 35.5 P1 40 40 Refer to product guide for lead forming and taping specifications. D Sn 45 45 50 50 *Refer to the appendix (Part number) for codes not listed here. CUT/FORMED LEAD Terminal type φd 5±0.5 φD P±0.5 φD Size : φD=10 to 18 C Dimension (C) φD= 5 to 8: C3: 3.5±0.5(Second standard C5: 5.0±0.5) +1.0 ) φD=10 to 18: C3: 3.5±0.5(Second standard C5: 5.0 -0 2max. ● ● Size : φD=10 to 18 φd φD P±0.5 φD 4.5+1.0 -0 1max. 2max. (2.5) Size : φD=10 to 18 P φD φD φd Dimension (P) φ10, φ12.5 : P=5.0±0.5 φ14.5, φ16, φ18 : P=7.5±0.5 3.5±0.5 φd A Dimension φD 10 to 12.5 14.5 to 18 A・B 3.2±0.5 3.2±0.5 φd 0.6 0.8 P 5.0±0.5 7.5±0.5 *1 Please consult with us about other terminal forming. *2 Please refer to dimensions of each series for gas escape end seal. *3 Conventionally, lead forming code is used in common by (BC) for two type of the lead bent directions. We added lead forming code (BD) newly and clarified the lead bent directions. Please place an order after the choice for an appropriate lead forming code depending on condition of use. ●Lead code : BD (Horizontal type)*3 ●Lead code : BC (Horizontal type)*3 2.5±0.5 B 1max. (1.1) (1.1) 4.5+1.0 -0 2max. Size : φD=10 to 18 P±0.5 ●Lead code : MC (Snap-in type) Size : φD=5 to 8 φd ●Lead code : FM (Snap-in type) P±0.5 Size : φD=5 to 18 Terminal type ●Lead code : IJ (Forming Cut type) P±0.5 Size : φD=5 to 8 φd ●Lead code : C3 (Cutting type) φD Terminal type ●Lead code : FC (Forming Cut type) 2.5±0.5 φd Dimension (P) φ10, φ12.5 : P=5.0±0.5 φ14.5, φ16, φ18 : P=7.5±0.5 ● ● ● ● P 3.5±0.5 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low profile, 85℃ SRG SRG Series ・Low profile :φ10×9mm toφ18×25mm ・Endurance : 2,000 hours at 85℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant Downsized Low profile SMG ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +85℃ 6.3 to 50Vdc (at 20℃, 120Hz) ±20% (M) I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tanδ (Max.) 0.28 0.24 0.20 0.16 0.14 0.12 When nominal capacitance exceeds 1,000µF, add 0.03 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V Z(-25℃)/Z(+20℃) 5 4 3 2 2 2 Z(-40℃)/Z(+20℃) 12 10 8 5 4 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours at 85℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 85℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] φD' F±0.5 F±0.5 φd Sleeve (PET : Black) F±0.5 ●Terminal Code : E or L' 15min. 4min. Vent φD φd F φD ' L' (φ10) (φ12.5 to φ18) Gas escape end seal 10 & 12.5 16 & 18 0.6 0.8 5.0 7.5 φD+0.5max. L+1.5max. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E S RG AAA E AA AAA M AAA D Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100µF:101, 2,200µF:222) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3, 35V:350, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low profile, 85℃ SRGSeries ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 Cap (µF) Rated ripple current Case code tanδ (mArms/ φD×L(mm) 85℃, 120Hz) 1,000 10× 9 4,700 16× 15 6,800 18× 15 10,000 18× 20 1,000 10× 12.5 2,200 12.5× 15 3,300 16× 15 4,700 18× 15 6,800 18× 20 10,000 18× 25 470 10× 9 1,000 12.5× 13 2,200 16× 15 3,300 18× 15 4,700 18× 20 6,800 18× 25 0.28 0.37 0.43 0.55 0.24 0.27 0.30 0.33 0.39 0.51 0.20 0.20 0.23 0.26 0.29 0.35 505 1,410 1,660 2,020 625 970 1,310 1,560 1,870 2,370 410 715 1,160 1,460 1,770 2,170 Part No. ESRG6R3E□□102MJ09S ESRG6R3E□□472ML15S ESRG6R3E□□682MM15S ESRG6R3E□□103MM20S ESRG100E□□102MJC5S ESRG100E□□222MK15S ESRG100E□□332ML15S ESRG100E□□472MM15S ESRG100E□□682MM20S ESRG100E□□103MM25S ESRG160E□□471MJ09S ESRG160E□□102MK13S ESRG160E□□222ML15S ESRG160E□□332MM15S ESRG160E□□472MM20S ESRG160E□□682MM25S WV (Vdc) 25 35 50 Cap (µF) 330 470 1,000 2,200 3,300 4,700 220 330 470 1,000 2,200 100 220 330 470 1,000 Rated ripple current Case code tanδ (mArms/ φD×L(mm) 85℃, 120Hz) 10 × 9 10 × 12.5 12.5 × 15 18 × 15 18 × 20 18 × 25 10 × 9 10 × 12.5 12.5 × 13 16 × 15 18 × 20 10 × 9 10 × 12.5 12.5 × 13 16 × 15 18 × 20 0.16 0.16 0.16 0.19 0.22 0.25 0.14 0.14 0.14 0.14 0.17 0.12 0.12 0.12 0.12 0.12 380 525 830 1,360 1,720 2,070 335 475 585 1,010 1,560 240 415 525 745 1,160 Part No. ESRG250E□□331MJ09S ESRG250E□□471MJC5S ESRG250E□□102MK15S ESRG250E□□222MM15S ESRG250E□□332MM20S ESRG250E□□472MM25S ESRG350E□□221MJ09S ESRG350E□□331MJC5S ESRG350E□□471MK13S ESRG350E□□102ML15S ESRG350E□□222MM20S ESRG500E□□101MJ09S ESRG500E□□221MJC5S ESRG500E□□331MK13S ESRG500E□□471ML15S ESRG500E□□102MM20S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 100 to 1,000 2,200 to 50 0.80 0.85 120 1.00 1.00 300 1.15 1.03 1k 1.30 1.05 10k 1.40 1.08 100k 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KRG Low profile, 105℃ KRG Series ・Low profile :φ10×9mm toφ18×25mm ・Endurance : 1,000 hours at 105℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant Downsized Low profile KMG ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105℃ 6.3 to 50Vdc (at 20℃, 120Hz) ±20% (M) I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tanδ (Max.) 0.28 0.24 0.20 0.16 0.14 0.12 When nominal capacitance exceeds 1,000µF, add 0.03 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V Z(-25℃)/Z(+20℃) 5 4 3 2 2 2 Z(-40℃)/Z(+20℃) 10 8 6 4 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 1,000 hours at 105℃. Rated voltage 6.3 to 16Vdc 25 to 50Vdc Capacitance change ≦±25% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3 to 16Vdc 25 to 50Vdc Capacitance change ≦±25% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] φD' F±0.5 F±0.5 φd Sleeve (PET : Brown) F±0.5 ●Terminal Code : E or L' 15min. 4min. Vent φD φd F φD ' L' (φ10) (φ12.5 to φ18) Gas escape end seal 10 & 12.5 16 & 18 0.6 0.8 5.0 7.5 φD+0.5max. L+1.5max. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KRG AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100µF:101, 1,000µF:102) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3, 35V:350, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low profile, 105℃ KRGSeries ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 1,000 10× 9 4,700 16× 15 6,800 18× 15 10,000 18× 20 1,000 10× 12.5 2,200 12.5× 15 3,300 16× 15 4,700 18× 15 6,800 18× 20 10,000 18× 25 470 10× 9 1,000 12.5× 13 2,200 16× 15 3,300 18× 15 4,700 18× 20 6,800 18× 25 0.28 0.37 0.43 0.55 0.24 0.27 0.30 0.33 0.39 0.51 0.20 0.20 0.23 0.26 0.29 0.35 365 1,010 1,190 1,440 445 690 940 1,120 1,330 1,700 290 515 830 1,050 1,260 1,560 Part No. EKRG6R3E□□102MJ09S EKRG6R3E□□472ML15S EKRG6R3E□□682MM15S EKRG6R3E□□103MM20S EKRG100E□□102MJC5S EKRG100E□□222MK15S EKRG100E□□332ML15S EKRG100E□□472MM15S EKRG100E□□682MM20S EKRG100E□□103MM25S EKRG160E□□471MJ09S EKRG160E□□102MK13S EKRG160E□□222ML15S EKRG160E□□332MM15S EKRG160E□□472MM20S EKRG160E□□682MM25S WV (Vdc) 25 35 50 Cap (µF) 330 470 1,000 2,200 3,300 4,700 220 330 470 1,000 2,200 100 220 330 470 1,000 Rated ripple current Case size tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 10 × 9 10 × 12.5 12.5 × 15 18 × 15 18 × 20 18 × 25 10 × 9 10 × 12.5 12.5 × 13 16 × 15 18 × 20 10 × 9 10 × 12.5 12.5 × 13 16 × 15 18 × 20 0.16 0.16 0.16 0.19 0.22 0.25 0.14 0.14 0.14 0.14 0.17 0.12 0.12 0.12 0.12 0.12 270 370 590 970 1,220 1,470 235 340 415 720 1,110 170 290 370 535 830 Part No. EKRG250E□□331MJ09S EKRG250E□□471MJC5S EKRG250E□□102MK15S EKRG250E□□222MM15S EKRG250E□□332MM20S EKRG250E□□472MM25S EKRG350E□□221MJ09S EKRG350E□□331MJC5S EKRG350E□□471MK13S EKRG350E□□102ML15S EKRG350E□□222MM20S EKRG500E□□101MJ09S EKRG500E□□221MJC5S EKRG500E□□331MK13S EKRG500E□□471ML15S EKRG500E□□102MM20S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 100 to 1,000 2,200 to 50 0.80 0.85 120 1.00 1.00 300 1.15 1.03 1k 1.30 1.05 10k 1.40 1.08 100k 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS SMQ Series Downsized, 85℃ SMQ ・Downsized from current standard SMG series ・Endurance : 2,000 hours at 85℃ ・Non solvent resistant type ・RoHS2 Compliant Downsized SMG ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +85℃(6.3 to 400Vdc) -25 to +85℃(450Vdc) 6.3 to 450Vdc ±20% (M) 6.3 to 100Vdc I=0.03CV or 4µA, whichever is greater. (at 20℃, 120Hz) 160 to 450Vdc CV≦1,000 I=0.1CV+40 max. CV＞1,000 I=0.04CV+100 max. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 1 minute) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 315 to 400V 450V tanδ(Max.) 0.28 0.24 0.20 0.16 0.14 0.12 0.09 0.08 0.20 0.24 0.24 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 200V 250V 350V 400V 450V 5 4 3 2 2 2 2 2 3 3 4 4 6 ≦φ8 Z(-25℃)/Z(+20℃) 5 4 3 2 2 2 2 2 3 3 4 4 6 ≧φ10 12 10 8 5 4 3 3 3 8 10 8 8 ≦φ8 Z(-40℃)/Z(+20℃) (at 120Hz) 10 8 5 4 3 3 3 4 4 6 6 ≧φ10 12 The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours at 85℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 85℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3 to 100Vdc 160 to 450Vdc Capacitance change ≦±20% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦500% of the initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φD' φd Sleeve (PET : Black) F±0.5 ● Terminal Code : E 15min. L' Vent (except φ5) 4min. (φ5 to φ10) (φ12.5 to φ18) φD φd F φD' L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 φD+0.5max. L+1.5max. 16 0.8 7.5 18 0.8 7.5 Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E S MQ A A A E A A A A A M A A A N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0µF:1R0,10µF:100,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3,50V:500,100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 85℃ SMQSeries ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 50 63 Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 85℃, 120Hz) 1,000 8× 11.5 2,200 10×16 3,300 10×20 4,700 12.5×20 6,800 12.5×25 10,000 16×25 15,000 16×31.5 22,000 18×35.5 220 5× 11 330 6.3× 11 470 6.3× 11 1,000 10×12.5 2,200 10×16 3,300 12.5×20 4,700 12.5×25 6,800 16×25 10,000 16×31.5 15,000 16×35.5 22,000 18×40 220 6.3× 11 330 6.3× 11 470 8× 11.5 1,000 10×12.5 2,200 10×20 3,300 12.5×25 4,700 16×25 6,800 16×25 10,000 16×35.5 15,000 18×40 100 5× 11 220 6.3× 11 330 8× 11.5 470 10×12.5 1,000 10×16 2,200 12.5×25 3,300 16×25 4,700 16×25 6,800 16×35.5 10,000 18×40 47 5× 11 68 6.3× 11 100 6.3× 11 220 8× 11.5 330 10×12.5 470 10×16 1,000 12.5×20 2,200 16×25 3,300 16×31.5 4,700 16×35.5 6,800 18×40 1.0 5× 11 2.2 5× 11 3.3 5× 11 4.7 5× 11 10 5× 11 22 5× 11 33 5× 11 47 6.3× 11 68 6.3× 11 100 8× 11.5 220 10×12.5 330 10×16 470 10×20 1,000 12.5×25 2,200 16×31.5 3,300 18×35.5 22 5× 11 0.28 0.30 0.32 0.34 0.38 0.46 0.56 0.70 0.24 0.24 0.24 0.24 0.26 0.28 0.30 0.34 0.42 0.52 0.66 0.20 0.20 0.20 0.20 0.22 0.24 0.26 0.30 0.38 0.48 0.16 0.16 0.16 0.16 0.16 0.18 0.20 0.22 0.26 0.34 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.18 0.20 0.24 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.16 0.09 540 890 1,190 1,550 1,920 2,350 2,550 3,200 240 290 350 650 990 1,450 1,800 2,250 2,550 2,880 3,400 260 320 440 700 1,000 1,700 2,100 2,250 2,710 3,100 180 280 440 550 860 1,550 1,980 2,200 2,600 2,800 130 160 210 385 490 650 1,150 1,800 2,100 2,500 2,800 17 28 35 41 60 95 125 155 210 260 430 590 760 1,350 1,980 2,500 100 Part No. ESMQ6R3E□□102MHB5D ESMQ6R3E□□222MJ16S ESMQ6R3E□□332MJ20S ESMQ6R3E□□472MK20S ESMQ6R3E□□682MK25S ESMQ6R3E□□103ML25S ESMQ6R3E□□153MLN3S ESMQ6R3E□□223MMP1S ESMQ100E□□221ME11D ESMQ100E□□331MF11D ESMQ100E□□471MF11D ESMQ100E□□102MJC5S ESMQ100E□□222MJ16S ESMQ100E□□332MK20S ESMQ100E□□472MK25S ESMQ100E□□682ML25S ESMQ100E□□103MLN3S ESMQ100E□□153MLP1S ESMQ100E□□223MM40S ESMQ160E□□221MF11D ESMQ160E□□331MF11D ESMQ160E□□471MHB5D ESMQ160E□□102MJC5S ESMQ160E□□222MJ20S ESMQ160E□□332MK25S ESMQ160E□□472ML25S ESMQ160E□□682ML25S ESMQ160E□□103MLP1S ESMQ160E□□153MM40S ESMQ250E□□101ME11D ESMQ250E□□221MF11D ESMQ250E□□331MHB5D ESMQ250E□□471MJC5S ESMQ250E□□102MJ16S ESMQ250E□□222MK25S ESMQ250E□□332ML25S ESMQ250E□□472ML25S ESMQ250E□□682MLP1S ESMQ250E□□103MM40S ESMQ350E□□470ME11D ESMQ350E□□680MF11D ESMQ350E□□101MF11D ESMQ350E□□221MHB5D ESMQ350E□□331MJC5S ESMQ350E□□471MJ16S ESMQ350E□□102MK20S ESMQ350E□□222ML25S ESMQ350E□□332MLN3S ESMQ350E□□472MLP1S ESMQ350E□□682MM40S ESMQ500E□□1R0ME11D ESMQ500E□□2R2ME11D ESMQ500E□□3R3ME11D ESMQ500E□□4R7ME11D ESMQ500E□□100ME11D ESMQ500E□□220ME11D ESMQ500E□□330ME11D ESMQ500E□□470MF11D ESMQ500E□□680MF11D ESMQ500E□□101MHB5D ESMQ500E□□221MJC5S ESMQ500E□□331MJ16S ESMQ500E□□471MJ20S ESMQ500E□□102MK25S ESMQ500E□□222MLN3S ESMQ500E□□332MMP1S ESMQ630E□□220ME11D WV (Vdc) 63 100 160 200 250 350 400 Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 85℃, 120Hz) 33 6.3 × 11 47 6.3 × 11 68 8 × 11.5 100 8 × 11.5 220 10 × 16 330 10 × 20 470 12.5 × 20 1,000 16 × 25 2,200 18 × 35.5 1.0 5 × 11 2.2 5 × 11 3.3 5 × 11 4.7 5 × 11 10 5 × 11 22 6.3 × 11 33 8 × 11.5 47 8 × 11.5 68 10 × 12.5 100 10 × 16 220 12.5 × 20 330 12.5 × 25 470 16 × 25 1,000 18 × 35.5 10 8 × 11.5 22 10 × 12.5 33 10 × 16 47 10 × 20 68 12.5 × 20 100 12.5 × 25 220 16 × 31.5 330 18 × 35.5 470 18 × 40 1.0 6.3 × 11 2.2 6.3 × 11 3.3 6.3 × 11 4.7 6.3 × 11 10 8 × 11.5 22 10 × 16 33 10 × 20 47 12.5 × 20 68 12.5 × 25 100 16 × 25 220 16 × 35.5 330 18 × 40 3.3 6.3 × 11 4.7 6.3 × 11 10 10 × 12.5 22 10 × 20 33 10 × 20 47 12.5 × 20 68 16 × 25 100 16 × 25 220 18 × 35.5 2.2 6.3 × 11 3.3 8 × 11.5 4.7 8 × 11.5 10 10 × 12.5 22 12.5 × 20 33 12.5 × 25 47 16 × 25 68 16 × 25 100 18 × 31.5 1.0 6.3 × 11 2.2 8 × 11.5 3.3 8 × 11.5 4.7 10 × 12.5 10 10 × 16 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.11 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 140 170 220 280 490 710 900 1,300 2,300 21 30 40 45 70 130 180 200 270 340 550 760 1,000 1,350 80 130 180 210 350 430 760 995 1,200 22 33 40 50 80 150 205 270 350 475 700 950 40 50 100 170 200 270 380 440 680 30 46 55 90 185 240 325 400 530 22 38 48 60 90 Part No. ESMQ630E□□330MF11D ESMQ630E□□470MF11D ESMQ630E□□680MHB5D ESMQ630E□□101MHB5D ESMQ630E□□221MJ16S ESMQ630E□□331MJ20S ESMQ630E□□471MK20S ESMQ630E□□102ML25S ESMQ630E□□222MMP1S ESMQ101E□□1R0ME11D ESMQ101E□□2R2ME11D ESMQ101E□□3R3ME11D ESMQ101E□□4R7ME11D ESMQ101E□□100ME11D ESMQ101E□□220MF11D ESMQ101E□□330MHB5D ESMQ101E□□470MHB5D ESMQ101E□□680MJC5S ESMQ101E□□101MJ16S ESMQ101E□□221MK20S ESMQ101E□□331MK25S ESMQ101E□□471ML25S ESMQ101E□□102MMP1S ESMQ161E□□100MHB5D ESMQ161E□□220MJC5S ESMQ161E□□330MJ16S ESMQ161E□□470MJ20S ESMQ161E□□680MK20S ESMQ161E□□101MK25S ESMQ161E□□221MLN3S ESMQ161E□□331MMP1S ESMQ161E□□471MM40S ESMQ201E□□1R0MF11D ESMQ201E□□2R2MF11D ESMQ201E□□3R3MF11D ESMQ201E□□4R7MF11D ESMQ201E□□100MHB5D ESMQ201E□□220MJ16S ESMQ201E□□330MJ20S ESMQ201E□□470MK20S ESMQ201E□□680MK25S ESMQ201E□□101ML25S ESMQ201E□□221MLP1S ESMQ201E□□331MM40S ESMQ251E□□3R3MF11D ESMQ251E□□4R7MF11D ESMQ251E□□100MJC5S ESMQ251E□□220MJ20S ESMQ251E□□330MJ20S ESMQ251E□□470MK20S ESMQ251E□□680ML25S ESMQ251E□□101ML25S ESMQ251E□□221MMP1S ESMQ351E□□2R2MF11D ESMQ351E□□3R3MHB5D ESMQ351E□□4R7MHB5D ESMQ351E□□100MJC5S ESMQ351E□□220MK20S ESMQ351E□□330MK25S ESMQ351E□□470ML25S ESMQ351E□□680ML25S ESMQ351E□□101MMN3S ESMQ401E□□1R0MF11D ESMQ401E□□2R2MHB5D ESMQ401E□□3R3MHB5D ESMQ401E□□4R7MJC5S ESMQ401E□□100MJ16S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 85℃ SMQSeries ◆STANDARD RATINGS Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 85℃, 120Hz) 22 33 47 68 100 2.2 3.3 12.5× 25 16× 25 16× 25 16× 31.5 18× 35.5 8× 11.5 10× 12.5 WV (Vdc) 400 450 0.24 0.24 0.24 0.24 0.24 0.24 0.24 205 275 280 340 440 28 40 Part No. ESMQ401E□□220MK25S ESMQ401E□□330ML25S ESMQ401E□□470ML25S ESMQ401E□□680MLN3S ESMQ401E□□101MMP1S ESMQ451E□□2R2MHB5D ESMQ451E□□3R3MJC5S WV (Vdc) Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 85℃, 120Hz) 450 4.7 10 22 33 47 68 100 10 × 12.5 10 × 20 12.5 × 25 16 × 25 16 × 31.5 18 × 35.5 18 × 40 0.24 0.24 0.24 0.24 0.24 0.24 0.24 46 80 140 180 220 260 280 Part No. ESMQ451E□□4R7MJC5S ESMQ451E□□100MJ20S ESMQ451E□□220MK25S ESMQ451E□□330ML25S ESMQ451E□□470MLN3S ESMQ451E□□680MMP1S ESMQ451E□□101MM40S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 1.0 to 4.7 10 to 68 100 to 1,000 2,200 to 50 0.65 0.75 0.80 0.85 120 1.00 1.00 1.00 1.00 300 1.35 1.25 1.15 1.03 1k 1.75 1.50 1.30 1.05 10k 2.30 1.75 1.40 1.08 100k 2.50 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KMQ Series Downsized, 105℃ KMQ ・Downsized from current standard KMG series ・Solvent resistant type except 160 to 450Vdc (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant Downsized KMG ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105℃(6.3 to 100Vdc) -40 to +105℃(160 to 400Vdc) -25 to +105℃(450Vdc) 6.3 to 450Vdc ±20% (M) 6.3 to 100Vdc I=0.03CV or 4µA, whichever is greater. (at 20℃, 120Hz) 160 to 450Vdc CV≦1,000 I=0.1CV+40 max. CV＞1,000 I=0.04CV+100 max. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 1 minute) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V 450V tanδ(Max.) 0.28 0.24 0.20 0.16 0.14 0.12 0.10 0.08 0.20 0.24 0.24 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63 to 100V 160 to 200V 250V 350V 400V 450V 5 4 3 2 2 2 2 3 3 4 4 6 ≦φ8 Z(-25℃)/Z(+20℃) 5 4 3 2 2 2 2 3 3 4 4 6 ≧φ10 10 8 6 4 3 3 3 8 10 8 8 ≦φ8 Z(-40℃)/Z(+20℃) (at 120Hz) 8 6 4 3 3 3 4 4 6 6 ≧φ10 10 The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 1,000 hours (2,000 hours forφ10 and more) at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3 to 100Vdc 160 to 450Vdc Capacitance change ≦±20% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦500% of the initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φD' φd Sleeve (PET : Brown) F±0.5 ● Terminal Code : E 15min. L' Vent (except φ5) 4min. (φ5 to φ10) (φ12.5 to φ18) Gas escape end seal φD 5 φd 0.5 F 2.0 φD' L' 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 φD+0.5max. L+1.5max. 16 0.8 7.5 18 0.8 7.5 ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KMQ A A A E A A A A A M A A A N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0µF:1R0,10µF:100,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3,35V:350,100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 105℃ KMQSeries ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 50 63 Cap (µF) is not solvent resistant. Rated ripple current Case size tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 1,000 8× 11.5 2,200 10×16 3,300 10×20 4,700 12.5×20 6,800 12.5×25 10,000 16×25 15,000 16×31.5 22,000 18×35.5 220 5× 11 330 6.3× 11 470 6.3× 11 1,000 10×12.5 2,200 10×16 3,300 12.5×20 4,700 12.5×25 6,800 16×25 10,000 16×31.5 15,000 16×35.5 22,000 18×40 220 6.3× 11 330 6.3× 11 470 8× 11.5 1,000 10×12.5 2,200 10×20 3,300 12.5×25 4,700 16×25 6,800 16×25 10,000 16×35.5 15,000 18×40 100 5× 11 220 6.3× 11 330 8× 11.5 470 10×12.5 1,000 10×16 2,200 12.5×25 3,300 16×25 4,700 16×25 6,800 16×35.5 10,000 18×40 47 5× 11 68 6.3× 11 100 6.3× 11 220 8× 11.5 330 10×12.5 470 10×16 1,000 12.5×20 2,200 16×25 3,300 16×31.5 4,700 16×35.5 6,800 18×40 1.0 5× 11 2.2 5× 11 3.3 5× 11 4.7 5× 11 10 5× 11 22 5× 11 33 5× 11 47 6.3× 11 68 6.3× 11 100 8× 11.5 220 10×12.5 330 10×16 470 10×20 1,000 12.5×25 2,200 16×31.5 3,300 18×35.5 22 5× 11 0.28 0.30 0.32 0.34 0.38 0.46 0.56 0.70 0.24 0.24 0.24 0.24 0.26 0.28 0.30 0.34 0.42 0.52 0.66 0.20 0.20 0.20 0.20 0.22 0.24 0.26 0.30 0.38 0.48 0.16 0.16 0.16 0.16 0.16 0.18 0.20 0.22 0.26 0.34 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.18 0.20 0.24 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.16 0.10 390 635 840 1,090 1,350 1,650 1,820 2,280 155 210 250 460 705 1,000 1,260 1,570 1,820 2,050 2,420 190 225 315 500 710 1,170 1,500 1,600 1,930 2,210 125 200 310 380 610 1,090 1,400 1,570 1,850 2,000 93 110 150 270 350 460 810 1,260 1,500 1,780 2,000 13 20 25 30 46 68 90 115 150 190 300 410 540 950 1,410 1,770 71 Part No. EKMQ6R3E□□102MHB5D EKMQ6R3E□□222MJ16S EKMQ6R3E□□332MJ20S EKMQ6R3E□□472MK20S EKMQ6R3E□□682MK25S EKMQ6R3E□□103ML25S EKMQ6R3E□□153MLN3S EKMQ6R3E□□223MMP1S EKMQ100E□□221ME11D EKMQ100E□□331MF11D EKMQ100E□□471MF11D EKMQ100E□□102MJC5S EKMQ100E□□222MJ16S EKMQ100E□□332MK20S EKMQ100E□□472MK25S EKMQ100E□□682ML25S EKMQ100E□□103MLN3S EKMQ100E□□153MLP1S EKMQ100E□□223MM40S EKMQ160E□□221MF11D EKMQ160E□□331MF11D EKMQ160E□□471MHB5D EKMQ160E□□102MJC5S EKMQ160E□□222MJ20S EKMQ160E□□332MK25S EKMQ160E□□472ML25S EKMQ160E□□682ML25S EKMQ160E□□103MLP1S EKMQ160E□□153MM40S EKMQ250E□□101ME11D EKMQ250E□□221MF11D EKMQ250E□□331MHB5D EKMQ250E□□471MJC5S EKMQ250E□□102MJ16S EKMQ250E□□222MK25S EKMQ250E□□332ML25S EKMQ250E□□472ML25S EKMQ250E□□682MLP1S EKMQ250E□□103MM40S EKMQ350E□□470ME11D EKMQ350E□□680MF11D EKMQ350E□□101MF11D EKMQ350E□□221MHB5D EKMQ350E□□331MJC5S EKMQ350E□□471MJ16S EKMQ350E□□102MK20S EKMQ350E□□222ML25S EKMQ350E□□332MLN3S EKMQ350E□□472MLP1S EKMQ350E□□682MM40S EKMQ500E□□1R0ME11D EKMQ500E□□2R2ME11D EKMQ500E□□3R3ME11D EKMQ500E□□4R7ME11D EKMQ500E□□100ME11D EKMQ500E□□220ME11D EKMQ500E□□330ME11D EKMQ500E□□470MF11D EKMQ500E□□680MF11D EKMQ500E□□101MHB5D EKMQ500E□□221MJC5S EKMQ500E□□331MJ16S EKMQ500E□□471MJ20S EKMQ500E□□102MK25S EKMQ500E□□222MLN3S EKMQ500E□□332MMP1S EKMQ630E□□220ME11D WV (Vdc) 63 100 160 200 250 350 400 Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 33 6.3 × 11 47 6.3 × 11 68 8 × 11.5 100 8 × 11.5 220 10 × 16 330 10 × 20 470 12.5 × 20 1,000 16 × 25 2,200 18 × 35.5 1.0 5 × 11 2.2 5 × 11 3.3 5 × 11 4.7 5 × 11 10 5 × 11 22 6.3 × 11 33 8 × 11.5 47 8 × 11.5 68 10 × 12.5 100 10 × 16 220 12.5 × 20 330 12.5 × 25 470 16 × 25 1,000 18 × 35.5 10 8 × 11.5 22 10 × 12.5 33 10 × 16 47 10 × 20 68 12.5 × 20 100 12.5 × 25 220 16 × 31.5 330 18 × 35.5 470 18 × 40 1.0 6.3 × 11 2.2 6.3 × 11 3.3 6.3 × 11 4.7 6.3 × 11 10 8 × 11.5 22 10 × 16 33 10 × 20 47 12.5 × 20 68 12.5 × 25 100 16 × 25 220 16 × 35.5 330 18 × 40 3.3 6.3 × 11 4.7 6.3 × 11 10 10 × 12.5 22 10 × 20 33 10 × 20 47 12.5 × 20 68 16 × 25 100 16 × 25 220 18 × 35.5 2.2 6.3 × 11 3.3 8 × 11.5 4.7 8 × 11.5 10 10 × 12.5 22 12.5 × 20 33 12.5 × 25 47 16 × 25 68 16 × 25 100 18 × 31.5 1.0 6.3 × 11 2.2 8 × 11.5 3.3 8 × 11.5 4.7 10 × 12.5 10 10 × 16 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.12 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 100 120 155 200 335 510 640 930 1,650 15 21 29 32 50 93 130 140 190 240 390 540 715 960 41 92 125 150 250 310 540 705 855 16 25 30 35 57 105 140 195 250 335 500 675 28 35 71 105 140 190 270 310 485 21 30 39 64 130 170 230 285 375 15 27 34 42 64 Part No. EKMQ630E□□330MF11D EKMQ630E□□470MF11D EKMQ630E□□680MHB5D EKMQ630E□□101MHB5D EKMQ630E□□221MJ16S EKMQ630E□□331MJ20S EKMQ630E□□471MK20S EKMQ630E□□102ML25S EKMQ630E□□222MMP1S EKMQ101E□□1R0ME11D EKMQ101E□□2R2ME11D EKMQ101E□□3R3ME11D EKMQ101E□□4R7ME11D EKMQ101E□□100ME11D EKMQ101E□□220MF11D EKMQ101E□□330MHB5D EKMQ101E□□470MHB5D EKMQ101E□□680MJC5S EKMQ101E□□101MJ16S EKMQ101E□□221MK20S EKMQ101E□□331MK25S EKMQ101E□□471ML25S EKMQ101E□□102MMP1S EKMQ161E□□100MHB5D EKMQ161E□□220MJC5S EKMQ161E□□330MJ16S EKMQ161E□□470MJ20S EKMQ161E□□680MK20S EKMQ161E□□101MK25S EKMQ161E□□221MLN3S EKMQ161E□□331MMP1S EKMQ161E□□471MM40S EKMQ201E□□1R0MF11D EKMQ201E□□2R2MF11D EKMQ201E□□3R3MF11D EKMQ201E□□4R7MF11D EKMQ201E□□100MHB5D EKMQ201E□□220MJ16S EKMQ201E□□330MJ20S EKMQ201E□□470MK20S EKMQ201E□□680MK25S EKMQ201E□□101ML25S EKMQ201E□□221MLP1S EKMQ201E□□331MM40S EKMQ251E□□3R3MF11D EKMQ251E□□4R7MF11D EKMQ251E□□100MJC5S EKMQ251E□□220MJ20S EKMQ251E□□330MJ20S EKMQ251E□□470MK20S EKMQ251E□□680ML25S EKMQ251E□□101ML25S EKMQ251E□□221MMP1S EKMQ351E□□2R2MF11D EKMQ351E□□3R3MHB5D EKMQ351E□□4R7MHB5D EKMQ351E□□100MJC5S EKMQ351E□□220MK20S EKMQ351E□□330MK25S EKMQ351E□□470ML25S EKMQ351E□□680ML25S EKMQ351E□□101MMN3S EKMQ401E□□1R0MF11D EKMQ401E□□2R2MHB5D EKMQ401E□□3R3MHB5D EKMQ401E□□4R7MJC5S EKMQ401E□□100MJ16S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 105℃ KMQSeries ◆STANDARD RATINGS WV (Vdc) 400 450 is not solvent resistant. Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 22 33 47 68 100 2.2 3.3 12.5× 25 16× 25 16× 25 16× 31.5 18× 35.5 8× 11.5 10× 12.5 0.24 0.24 0.24 0.24 0.24 0.24 0.24 145 195 200 240 310 20 28 Part No. EKMQ401E□□220MK25S EKMQ401E□□330ML25S EKMQ401E□□470ML25S EKMQ401E□□680MLN3S EKMQ401E□□101MMP1S EKMQ451E□□2R2MHB5D EKMQ451E□□3R3MJC5S WV (Vdc) Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 450 4.7 10 22 33 47 68 100 10 × 12.5 10 × 20 12.5 × 25 16 × 25 16 × 31.5 18 × 35.5 18 × 40 0.24 0.24 0.24 0.24 0.24 0.24 0.24 32 56 100 125 155 185 200 Part No. EKMQ451E□□4R7MJC5S EKMQ451E□□100MJ20S EKMQ451E□□220MK25S EKMQ451E□□330ML25S EKMQ451E□□470MLN3S EKMQ451E□□680MMP1S EKMQ451E□□101MM40S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 1.0 to 4.7 10 to 68 100 to 1,000 2,200 to 50 0.65 0.75 0.80 0.85 120 1.00 1.00 1.00 1.00 300 1.35 1.25 1.15 1.03 1k 1.75 1.50 1.30 1.05 10k 2.30 1.75 1.40 1.08 100k 2.50 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS SMG Series Standard, 85℃ SMQ Downsized ・Endurance : 2,000 hours at 85℃ ・Solvent resistant type except 350 to 450Vdc (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant SMG ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +85℃(6.3 to 400Vdc) -25 to +85℃(450Vdc) 6.3 to 450Vdc ±20% (M) 6.3 to 100Vdc I=0.03CV or 4µA, whichever is greater. (at 20℃, 120Hz) 160 to 450Vdc Time After 1minute After 5minute CV CV≦1,000 I=0.1CV+40 max. I=0.03CV+15 max. (after 1 minute) CV＞1,000 I=0.04CV+100 max. I=0.02CV+25 max. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V 450V tanδ(Max.) 0.34 0.24 0.20 0.16 0.14 0.12 0.09 0.08 0.20 0.24 0.24 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V 450V Z(-25℃)/Z(+20℃) 5 4 3 2 2 2 2 2 3 6 6 Z(-40℃)/Z(+20℃) 12 10 8 5 4 3 3 3 4 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours at 85℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 85℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3 to 100Vdc 160 to 450Vdc Capacitance change ≦±20% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦500% of the initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φD' φd Sleeve (PET : Black) F±0.5 ● Terminal Code : E 15min. L' Vent (except φ5) 4min. (φ5 to φ10) (φ12.5 to φ18) 5 φD φd 0.5 2.0 F φD' L' 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 φD+0.5max. L+1.5max. 16 0.8 7.5 18 0.8 7.5 Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E S MG A A A E A A A A A M A A A N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0µF:1R0,10µF:100,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3,100V:101,315V:3B1) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Standard, 85℃ SMGSeries ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 50 63 Cap (µF) is not solvent resistant. Rated ripple current Case size tanδ (mArms/ φD×L(mm) 85℃, 120Hz) 220 5× 11 330 6.3× 11 470 6.3× 11 1,000 8× 11.5 2,200 10×20 3,300 10×20 4,700 12.5×20 6,800 12.5×25 10,000 16×25 15,000 16×35.5 22,000 18×40 220 5× 11 330 6.3× 11 470 6.3× 11 1,000 10×12.5 2,200 10×20 3,300 12.5×20 4,700 12.5×25 6,800 16×25 10,000 16×35.5 15,000 18×35.5 100 5× 11 220 6.3× 11 330 8× 11.5 470 8× 11.5 1,000 10×16 2,200 12.5×20 3,300 12.5×25 4,700 16×25 6,800 16×31.5 10,000 18×35.5 47 5× 11 100 6.3× 11 220 8× 11.5 330 8× 11.5 470 10×12.5 1,000 10×20 2,200 12.5×25 3,300 16×25 4,700 16×31.5 6,800 18×35.5 47 5× 11 100 6.3× 11 220 8× 11.5 330 10×12.5 470 10×16 1,000 12.5×20 2,200 16×25 3,300 16×35.5 4,700 18×35.5 1.0 5× 11 2.2 5× 11 3.3 5× 11 4.7 5× 11 10 5× 11 22 5× 11 33 5× 11 47 6.3× 11 100 8× 11.5 220 10×12.5 330 10×16 470 10×20 1,000 12.5×25 2,200 16×35.5 3,300 18×35.5 10 5× 11 0.34 0.34 0.34 0.34 0.36 0.38 0.40 0.44 0.52 0.62 0.76 0.24 0.24 0.24 0.24 0.26 0.28 0.30 0.34 0.42 0.52 0.20 0.20 0.20 0.20 0.20 0.22 0.24 0.26 0.30 0.38 0.16 0.16 0.16 0.16 0.16 0.16 0.18 0.20 0.22 0.26 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.18 0.20 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.16 0.09 200 270 320 540 1,000 1,185 1,545 1,915 2,330 2,845 3,320 240 290 350 650 1,070 1,420 1,780 2,220 2,670 3,080 160 260 370 440 785 1,295 1,655 2,090 2,520 2,920 115 190 330 440 545 955 1,540 1,975 2,420 2,880 130 210 385 490 645 1,145 1,785 2,275 2,700 17 28 35 41 60 95 125 155 260 430 585 755 1,340 2,075 2,500 65 Part No. ESMG6R3E□□221ME11D ESMG6R3E□□331MF11D ESMG6R3E□□471MF11D ESMG6R3E□□102MHB5D ESMG6R3E□□222MJ20S ESMG6R3E□□332MJ20S ESMG6R3E□□472MK20S ESMG6R3E□□682MK25S ESMG6R3E□□103ML25S ESMG6R3E□□153MLP1S ESMG6R3E□□223MM40S ESMG100E□□221ME11D ESMG100E□□331MF11D ESMG100E□□471MF11D ESMG100E□□102MJC5S ESMG100E□□222MJ20S ESMG100E□□332MK20S ESMG100E□□472MK25S ESMG100E□□682ML25S ESMG100E□□103MLP1S ESMG100E□□153MMP1S ESMG160E□□101ME11D ESMG160E□□221MF11D ESMG160E□□331MHB5D ESMG160E□□471MHB5D ESMG160E□□102MJ16S ESMG160E□□222MK20S ESMG160E□□332MK25S ESMG160E□□472ML25S ESMG160E□□682MLN3S ESMG160E□□103MMP1S ESMG250E□□470ME11D ESMG250E□□101MF11D ESMG250E□□221MHB5D ESMG250E□□331MHB5D ESMG250E□□471MJC5S ESMG250E□□102MJ20S ESMG250E□□222MK25S ESMG250E□□332ML25S ESMG250E□□472MLN3S ESMG250E□□682MMP1S ESMG350E□□470ME11D ESMG350E□□101MF11D ESMG350E□□221MHB5D ESMG350E□□331MJC5S ESMG350E□□471MJ16S ESMG350E□□102MK20S ESMG350E□□222ML25S ESMG350E□□332MLP1S ESMG350E□□472MMP1S ESMG500E□□1R0ME11D ESMG500E□□2R2ME11D ESMG500E□□3R3ME11D ESMG500E□□4R7ME11D ESMG500E□□100ME11D ESMG500E□□220ME11D ESMG500E□□330ME11D ESMG500E□□470MF11D ESMG500E□□101MHB5D ESMG500E□□221MJC5S ESMG500E□□331MJ16S ESMG500E□□471MJ20S ESMG500E□□102MK25S ESMG500E□□222MLP1S ESMG500E□□332MMP1S ESMG630E□□100ME11D WV (Vdc) 63 100 160 200 250 350 400 450 Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 85℃, 120Hz) 22 5 × 11 33 6.3 × 11 47 6.3 × 11 100 10 × 12.5 220 10 × 16 330 10 × 20 470 12.5 × 20 1,000 16 × 25 1.0 5 × 11 2.2 5 × 11 3.3 5 × 11 4.7 5 × 11 10 6.3 × 11 22 8 × 11.5 33 8 × 11.5 47 10 × 12.5 100 10 × 20 220 12.5 × 25 330 12.5 × 25 470 16 × 25 1,000 18 × 40 3.3 6.3 × 11 4.7 6.3 × 11 10 10 × 12.5 22 10 × 20 33 10 × 20 47 12.5 × 20 100 12.5 × 25 220 16 × 31.5 330 18 × 35.5 3.3 6.3 × 11 4.7 8 × 11.5 10 10 × 12.5 22 10 × 20 33 10 × 20 47 12.5 × 20 100 16 × 25 220 18 × 35.5 2.2 6.3 × 11 3.3 8 × 11.5 4.7 8 × 11.5 10 10 × 16 22 10 × 20 33 12.5 × 20 47 12.5 × 25 100 16 × 31.5 220 18 × 40 1.0 6.3 × 11 2.2 8 × 11.5 3.3 8 × 11.5 4.7 10 × 12.5 10 10 × 20 22 12.5 × 20 33 16 × 25 47 16 × 25 100 18 × 31.5 1.0 6.3 × 11 2.2 8 × 11.5 3.3 10 × 12.5 4.7 10 × 16 10 10 × 20 22 12.5 × 25 33 16 × 25 47 16 × 31.5 2.2 10 × 12.5 3.3 10 × 16 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 100 140 170 300 490 710 900 1,300 21 30 40 45 75 130 180 230 370 620 760 1,000 1,380 40 48 94 170 205 270 430 760 995 40 55 94 170 205 270 475 810 32 46 55 105 170 230 295 515 825 22 38 46 65 115 185 275 325 530 22 38 54 71 115 205 275 350 32 44 Part No. ESMG630E□□220ME11D ESMG630E□□330MF11D ESMG630E□□470MF11D ESMG630E□□101MJC5S ESMG630E□□221MJ16S ESMG630E□□331MJ20S ESMG630E□□471MK20S ESMG630E□□102ML25S ESMG101E□□1R0ME11D ESMG101E□□2R2ME11D ESMG101E□□3R3ME11D ESMG101E□□4R7ME11D ESMG101E□□100MF11D ESMG101E□□220MHB5D ESMG101E□□330MHB5D ESMG101E□□470MJC5S ESMG101E□□101MJ20S ESMG101E□□221MK25S ESMG101E□□331MK25S ESMG101E□□471ML25S ESMG101E□□102MM40S ESMG161E□□3R3MF11D ESMG161E□□4R7MF11D ESMG161E□□100MJC5S ESMG161E□□220MJ20S ESMG161E□□330MJ20S ESMG161E□□470MK20S ESMG161E□□101MK25S ESMG161E□□221MLN3S ESMG161E□□331MMP1S ESMG201E□□3R3MF11D ESMG201E□□4R7MHB5D ESMG201E□□100MJC5S ESMG201E□□220MJ20S ESMG201E□□330MJ20S ESMG201E□□470MK20S ESMG201E□□101ML25S ESMG201E□□221MMP1S ESMG251E□□2R2MF11D ESMG251E□□3R3MHB5D ESMG251E□□4R7MHB5D ESMG251E□□100MJ16S ESMG251E□□220MJ20S ESMG251E□□330MK20S ESMG251E□□470MK25S ESMG251E□□101MLN3S ESMG251E□□221MM40S ESMG351E□□1R0MF11D ESMG351E□□2R2MHB5D ESMG351E□□3R3MHB5D ESMG351E□□4R7MJC5S ESMG351E□□100MJ20S ESMG351E□□220MK20S ESMG351E□□330ML25S ESMG351E□□470ML25S ESMG351E□□101MMN3S ESMG401E□□1R0MF11D ESMG401E□□2R2MHB5D ESMG401E□□3R3MJC5S ESMG401E□□4R7MJ16S ESMG401E□□100MJ20S ESMG401E□□220MK25S ESMG401E□□330ML25S ESMG401E□□470MLN3S ESMG451E□□2R2MJC5S ESMG451E□□3R3MJ16S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Standard, 85℃ SMGSeries ◆STANDARD RATINGS is not solvent resistant. WV (Vdc) Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 85℃, 120Hz) 450 4.7 10 22 10× 20 12.5× 20 16× 25 0.24 0.24 0.24 56 91 165 Part No. ESMG451E□□4R7MJ20S ESMG451E□□100MK20S ESMG451E□□220ML25S WV (Vdc) Cap (µF) 450 33 47 Rated ripple current Case size tanδ (mArms/ φD×L(mm) 85℃, 120Hz) 16 × 31.5 16 × 35.5 0.24 0.24 215 265 Part No. ESMG451E□□330MLN3S ESMG451E□□470MLP1S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 1.0 to 4.7 10 to 47 100 to 1,000 2,200 to 50 0.65 0.75 0.80 0.85 120 1.00 1.00 1.00 1.00 300 1.35 1.25 1.15 1.03 1k 1.75 1.50 1.30 1.05 10k 2.30 1.75 1.40 1.08 100k 2.50 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KMG Series Standard, 105℃ KMQ Downsized ・Endurance with ripple current : 1,000 to 2,000 hours at 105℃ ・Solvent resistant type except 350 to 450Vdc (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant KMG ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105℃(6.3 to 100Vdc) -40 to +105℃(160 to 400Vdc) -25 to +105℃(450Vdc) 6.3 to 450Vdc ±20% (M) 6.3 to 100Vdc I=0.03CV or 4µA, whichever is greater. (at 20℃, 120Hz) 160 to 450Vdc Time After 1minute After 5minutes CV CV≦1,000 I=0.1CV+40 max. I=0.03CV+15 max. (after 1 minute) CV＞1,000 I=0.04CV+100 max. I=0.02CV+25 max. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V 450V tanδ (Max.) 0.34 0.24 0.20 0.16 0.14 0.12 0.10 0.08 0.20 0.24 0.24 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V 450V Z(-25℃)/Z(+20℃) 5 4 3 2 2 2 2 2 3 6 6 Z(-40℃)/Z(+20℃) 12 10 8 5 4 3 3 3 4 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 1,000 hours (2,000 hours to meet the following two conditions 1): 160Vdc and larger, 2) :φ12.5 and larger) at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3 to 100Vcd 160 to 450Vdc Capacitance change ≦±20% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦500% of the initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φD' φd Sleeve (PET : Brown) F±0.5 ●Terminal Code : E L' 15min. 4min. (φ5 toφ10) Vent (exceptφ5) (φ12.5 to φ18) φD φd F φD' L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 φD+0.5max L+1.5max 16 0.8 7.5 18 0.8 7.5 Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KMG A A A E A A A A A M A A A N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0µF:1R0,10µF:100,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3,35V:350,100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Standard, 105℃ KMGSeries ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 25 35 50 Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 220 5× 11 330 6.3× 11 470 6.3× 11 1,000 8× 11.5 2,200 10×20 3,300 10×20 4,700 12.5×20 6,800 12.5×25 10,000 16×25 15,000 16×35.5 22,000 18×40 220 6.3× 11 330 6.3× 11 470 8× 11.5 1,000 10×12.5 2,200 10×20 3,300 12.5×20 4,700 12.5×25 6,800 16×25 10,000 16×35.5 15,000 18×35.5 100 5× 11 220 6.3× 11 330 8× 11.5 470 8× 11.5 1,000 10×16 2,200 12.5×20 3,300 12.5×25 4,700 16×25 6,800 16×31.5 10,000 18×35.5 47 5× 11 100 6.3× 11 220 8× 11.5 330 8× 11.5 470 10×12.5 1,000 10×20 2,200 12.5×25 3,300 16×25 4,700 16×31.5 6,800 18×35.5 47 5× 11 100 6.3× 11 220 8× 11.5 330 10×12.5 470 10×16 1,000 12.5×20 2,200 16×25 3,300 16×35.5 4,700 18×35.5 1.0 5× 11 2.2 5× 11 3.3 5× 11 4.7 5× 11 10 5× 11 22 5× 11 33 5× 11 47 6.3× 11 100 8× 11.5 220 10×12.5 330 10×16 470 10×20 1,000 12.5×25 2,200 16×35.5 3,300 18×35.5 0.34 0.34 0.34 0.34 0.36 0.38 0.40 0.44 0.52 0.62 0.76 0.24 0.24 0.24 0.24 0.26 0.28 0.30 0.34 0.42 0.52 0.20 0.20 0.20 0.20 0.20 0.22 0.24 0.26 0.30 0.38 0.16 0.16 0.16 0.16 0.16 0.16 0.18 0.20 0.22 0.26 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.18 0.20 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.16 140 190 230 380 710 840 1,090 1,350 1,650 2,010 2,350 170 200 250 460 760 1,000 1,260 1,570 1,890 2,180 110 180 260 310 560 920 1,170 1,480 1,780 2,060 80 130 230 310 380 680 1,090 1,400 1,710 2,040 90 150 270 350 460 810 1,260 1,610 1,910 13 20 25 30 40 65 90 110 180 300 410 530 950 1,470 1,770 Part No. EKMG6R3E□□221ME11D EKMG6R3E□□331MF11D EKMG6R3E□□471MF11D EKMG6R3E□□102MHB5D EKMG6R3E□□222MJ20S EKMG6R3E□□332MJ20S EKMG6R3E□□472MK20S EKMG6R3E□□682MK25S EKMG6R3E□□103ML25S EKMG6R3E□□153MLP1S EKMG6R3E□□223MM40S EKMG100E□□221MF11D EKMG100E□□331MF11D EKMG100E□□471MHB5D EKMG100E□□102MJC5S EKMG100E□□222MJ20S EKMG100E□□332MK20S EKMG100E□□472MK25S EKMG100E□□682ML25S EKMG100E□□103MLP1S EKMG100E□□153MMP1S EKMG160E□□101ME11D EKMG160E□□221MF11D EKMG160E□□331MHB5D EKMG160E□□471MHB5D EKMG160E□□102MJ16S EKMG160E□□222MK20S EKMG160E□□332MK25S EKMG160E□□472ML25S EKMG160E□□682MLN3S EKMG160E□□103MMP1S EKMG250E□□470ME11D EKMG250E□□101MF11D EKMG250E□□221MHB5D EKMG250E□□331MHB5D EKMG250E□□471MJC5S EKMG250E□□102MJ20S EKMG250E□□222MK25S EKMG250E□□332ML25S EKMG250E□□472MLN3S EKMG250E□□682MMP1S EKMG350E□□470ME11D EKMG350E□□101MF11D EKMG350E□□221MHB5D EKMG350E□□331MJC5S EKMG350E□□471MJ16S EKMG350E□□102MK20S EKMG350E□□222ML25S EKMG350E□□332MLP1S EKMG350E□□472MMP1S EKMG500E□□1R0ME11D EKMG500E□□2R2ME11D EKMG500E□□3R3ME11D EKMG500E□□4R7ME11D EKMG500E□□100ME11D EKMG500E□□220ME11D EKMG500E□□330ME11D EKMG500E□□470MF11D EKMG500E□□101MHB5D EKMG500E□□221MJC5S EKMG500E□□331MJ16S EKMG500E□□471MJ20S EKMG500E□□102MK25S EKMG500E□□222MLP1S EKMG500E□□332MMP1S □□ : Enter the appropriate lead forming or taping code. WV (Vdc) 63 100 160 200 250 350 400 Cap (µF) 10 22 33 47 100 220 330 470 1,000 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1,000 3.3 4.7 10 22 33 47 100 220 330 3.3 4.7 10 22 33 47 100 220 2.2 3.3 4.7 10 22 33 47 100 220 1.0 2.2 3.3 4.7 10 22 33 47 100 1.0 2.2 3.3 4.7 10 22 33 47 100 Rated ripple current Case size tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 5 × 11 5 × 11 6.3 × 11 6.3 × 11 10 × 12.5 10 × 16 10 × 20 12.5 × 20 16 × 25 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 20 12.5 × 25 16 × 25 16 × 31.5 18 × 40 6.3 × 11 6.3 × 11 10 × 12.5 10 × 20 10 × 20 12.5 × 20 16 × 25 16 × 31.5 18 × 35.5 6.3 × 11 8 × 11.5 10 × 16 10 × 20 12.5 × 20 12.5 × 20 16 × 25 18 × 35.5 6.3 × 11 8 × 11.5 8 × 11.5 10 × 16 12.5 × 20 12.5 × 20 12.5 × 25 16 × 31.5 18 × 40 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 20 16 × 25 16 × 25 18 × 31.5 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 16 × 25 16 × 31.5 16 × 40 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 46 71 100 120 215 335 510 640 930 15 21 29 32 54 93 130 165 265 440 540 715 985 28 34 67 120 145 195 335 540 705 28 39 74 120 160 195 335 575 23 32 39 74 130 160 210 365 585 15 26 38 50 80 130 195 230 375 15 26 38 50 80 145 195 250 350 Part No. EKMG630E□□100ME11D EKMG630E□□220ME11D EKMG630E□□330MF11D EKMG630E□□470MF11D EKMG630E□□101MJC5S EKMG630E□□221MJ16S EKMG630E□□331MJ20S EKMG630E□□471MK20S EKMG630E□□102ML25S EKMG101E□□1R0ME11D EKMG101E□□2R2ME11D EKMG101E□□3R3ME11D EKMG101E□□4R7ME11D EKMG101E□□100MF11D EKMG101E□□220MHB5D EKMG101E□□330MHB5D EKMG101E□□470MJC5S EKMG101E□□101MJ20S EKMG101E□□221MK25S EKMG101E□□331ML25S EKMG101E□□471MLN3S EKMG101E□□102MM40S EKMG161E□□3R3MF11D EKMG161E□□4R7MF11D EKMG161E□□100MJC5S EKMG161E□□220MJ20S EKMG161E□□330MJ20S EKMG161E□□470MK20S EKMG161E□□101ML25S EKMG161E□□221MLN3S EKMG161E□□331MMP1S EKMG201E□□3R3MF11D EKMG201E□□4R7MHB5D EKMG201E□□100MJ16S EKMG201E□□220MJ20S EKMG201E□□330MK20S EKMG201E□□470MK20S EKMG201E□□101ML25S EKMG201E□□221MMP1S EKMG251E□□2R2MF11D EKMG251E□□3R3MHB5D EKMG251E□□4R7MHB5D EKMG251E□□100MJ16S EKMG251E□□220MK20S EKMG251E□□330MK20S EKMG251E□□470MK25S EKMG251E□□101MLN3S EKMG251E□□221MM40S EKMG351E□□1R0MF11D EKMG351E□□2R2MHB5D EKMG351E□□3R3MJC5S EKMG351E□□4R7MJ16S EKMG351E□□100MJ20S EKMG351E□□220MK20S EKMG351E□□330ML25S EKMG351E□□470ML25S EKMG351E□□101MMN3S EKMG401E□□1R0MF11D EKMG401E□□2R2MHB5D EKMG401E□□3R3MJC5S EKMG401E□□4R7MJ16S EKMG401E□□100MJ20S EKMG401E□□220MK25S EKMG401E□□330ML25S EKMG401E□□470MLN3S EKMG401E□□101ML40S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Standard, 105℃ KMGSeries ◆STANDARD RATINGS is not solvent resistant. WV (Vdc) Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 450 2.2 3.3 4.7 10 22 33 47 10× 12.5 10× 16 10× 20 12.5×20 16×25 16×31.5 16×35.5 0.24 0.24 0.24 0.24 0.24 0.24 0.24 23 31 40 65 115 155 185 Part No. EKMG451E□□2R2MJC5S EKMG451E□□3R3MJ16S EKMG451E□□4R7MJ20S EKMG451E□□100MK20S EKMG451E□□220ML25S EKMG451E□□330MLN3S EKMG451E□□470MLP1S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 1.0 to 4.7 10 to 47 100 to 1,000 2,200 to 50 0.65 0.75 0.80 0.85 120 1.00 1.00 1.00 1.00 300 1.35 1.25 1.15 1.03 1k 1.75 1.50 1.30 1.05 10k 2.30 1.75 1.40 1.08 100k 2.50 1.80 1.50 1.08 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KZN Low impedance, 105℃ Upgrade! Series KZN ・Adoption of innovative high stability electrolyte ・High ripple current and long endurance ・Rated voltage range : 6.3 to 100Vdc, Capacitance range : 8.2 to 22,000µF ・Endurance with ripple current : 6,000 to 10,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant Higher ripple KZM ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 6.3 to 100Vdc ±20% (M) I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V tanδ (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. Z (-25℃) / Z (+20℃) 2max. Z (-40℃) / Z (+20℃) 3max. Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃. φ10×16L, 20L, 25L Case size φ5&φ6.3 φ8×11.5L φ10×12.5L φ8×15L, 20L φ12.5 to φ18 6.3Vdc 6,000 hours 8,000 hours 9,000 hours 9,000 hours 10,000 hours Time 10 to 50Vdc 7,000 hours 9,000 hours 9,000 hours 10,000 hours 10,000 hours 10,000 hours 63 to 100Vdc 6,000 hours 8,000 hours 9,000 hours 9,000 hours Capacitance change ≦±25% of the initial value (6.3, 10Vdc : ≦±30%) D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±25% of the initial value (6.3, 10Vdc : ≦±30%) D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φD' φd Sleeve(PET : Brown) F±0.5 ●Terminal Code : E L' 15min. 4min. (φ5 to 10) (φ12.5 to 18) φD φd F D' L' 5 0.5 2.0 6.3 0.5 2.5 8 10 12.5 0.6 0.6 0.6 3.5 5.0 5.0 φD＋0.5max. L＋1.5max. 16 0.8 7.5 18 0.8 7.5 Gas escape end seal Vent (Except φ5 & φ6.3) ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KZN AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100µF:101, 3,900µF:392) Lead forming·taping code Terminal code Voltage code (ex. 16V:160 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ KZNSeries Upgrade! ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ 220 470 820 1,200 1,200 1,500 1,800 2,700 2,700 3,300 3,900 5,600 6.3 6,800 6,800 8,200 8,200 10,000 12,000 12,000 15,000 15,000 18,000 18,000 22,000 150 330 560 820 1,000 1,000 1,200 1,800 1,800 2,200 2,700 3,900 10 4,700 4,700 5,600 5,600 6,800 8,200 8,200 10,000 10,000 12,000 12,000 15,000 120 270 470 680 680 820 16 1,000 1,500 1,500 1,800 2,200 2,700 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 12.5×16 10×25 12.5×20 12.5×25 12.5×30 16×20 12.5×35 18×20 16×25 16×31.5 18×25 16×35.5 18×31.5 16×40 18×35.5 18×40 5×11 6.3×11 8×11.5 8×15 8×20 10×12.5 10×16 10×20 12.5×16 10×25 12.5×20 12.5×25 12.5×30 16×20 12.5×35 18×20 16×25 16×31.5 18×25 16×35.5 18×31.5 16×40 18×35.5 18×40 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 12.5×16 10×25 12.5×20 12.5×25 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.38 0.17 0.075 0.059 0.053 0.041 0.038 0.028 0.035 0.026 0.025 0.019 0.018 0.021 0.016 0.020 0.017 0.016 0.016 0.014 0.014 0.013 0.012 0.011 0.38 0.17 0.075 0.059 0.041 0.053 0.038 0.028 0.035 0.026 0.025 0.019 0.018 0.021 0.016 0.020 0.017 0.016 0.016 0.014 0.014 0.013 0.012 0.011 0.38 0.17 0.075 0.059 0.053 0.041 0.038 0.028 0.035 0.026 0.025 0.019 1.2 0.51 0.23 0.18 0.16 0.13 0.12 0.084 0.11 0.072 0.075 0.057 0.054 0.063 0.048 0.060 0.051 0.048 0.048 0.042 0.042 0.039 0.036 0.033 1.2 0.51 0.23 0.18 0.13 0.16 0.12 0.084 0.11 0.072 0.075 0.057 0.054 0.063 0.048 0.060 0.051 0.048 0.048 0.042 0.042 0.039 0.036 0.033 1.2 0.51 0.23 0.18 0.16 0.13 0.12 0.084 0.11 0.072 0.075 0.057 345 540 945 1,250 1,330 1,500 1,760 1,960 1,900 2,250 2,480 2,900 3,450 3,250 3,570 3,450 3,630 4,100 3,880 4,280 4,190 4,580 4,380 4,960 450 700 1,200 1,600 1,960 1,700 2,000 2,500 2,400 2,900 2,600 3,200 3,660 3,330 4,120 3,450 3,810 4,100 3,880 4,280 4,190 4,580 4,380 4,960 450 700 1,200 1,600 1,700 1,960 2,000 2,500 2,400 2,900 2,600 3,200 Part No. WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ EKZN6R3E□□221ME11D EKZN6R3E□□471MF11D EKZN6R3E□□821MHB5D EKZN6R3E□□122MH15D EKZN6R3E□□122MJC5S EKZN6R3E□□152MH20D EKZN6R3E□□182MJ16S EKZN6R3E□□272MJ20S EKZN6R3E□□272MK16S EKZN6R3E□□332MJ25S EKZN6R3E□□392MK20S EKZN6R3E□□562MK25S EKZN6R3E□□682MK30S EKZN6R3E□□682ML20S EKZN6R3E□□822MK35S EKZN6R3E□□822MM20S EKZN6R3E□□103ML25S EKZN6R3E□□123MLN3S EKZN6R3E□□123MM25S EKZN6R3E□□153MLP1S EKZN6R3E□□153MMN3S EKZN6R3E□□183ML40S EKZN6R3E□□183MMP1S EKZN6R3E□□223MM40S EKZN100E□□151ME11D EKZN100E□□331MF11D EKZN100E□□561MHB5D EKZN100E□□821MH15D EKZN100E□□102MH20D EKZN100E□□102MJC5S EKZN100E□□122MJ16S EKZN100E□□182MJ20S EKZN100E□□182MK16S EKZN100E□□222MJ25S EKZN100E□□272MK20S EKZN100E□□392MK25S EKZN100E□□472MK30S EKZN100E□□472ML20S EKZN100E□□562MK35S EKZN100E□□562MM20S EKZN100E□□682ML25S EKZN100E□□822MLN3S EKZN100E□□822MM25S EKZN100E□□103MLP1S EKZN100E□□103MMN3S EKZN100E□□123ML40S EKZN100E□□123MMP1S EKZN100E□□153MM40S EKZN160E□□121ME11D EKZN160E□□271MF11D EKZN160E□□471MHB5D EKZN160E□□681MH15D EKZN160E□□681MJC5S EKZN160E□□821MH20D EKZN160E□□102MJ16S EKZN160E□□152MJ20S EKZN160E□□152MK16S EKZN160E□□182MJ25S EKZN160E□□222MK20S EKZN160E□□272MK25S 3,300 3,900 3,900 4,700 5,600 6,800 16 6,800 8,200 8,200 10,000 10,000 12,000 68 150 270 470 470 560 680 820 1,000 1,200 1,500 1,800 25 2,200 2,200 2,700 3,300 3,300 4,700 4,700 5,600 5,600 6,800 6,800 8,200 47 100 180 220 270 330 390 470 560 680 820 1,200 35 1,500 1,500 1,800 1,800 1,800 2,700 2,700 3,300 3,300 3,900 3,900 4,700 12.5×30 12.5×35 16×20 18×20 16×25 16×31.5 18×25 16×35.5 18×31.5 16×40 18×35.5 18×40 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 12.5×16 10×25 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 18×20 16×31.5 18×25 16×35.5 18×31.5 16×40 18×35.5 18×40 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 12.5×16 10×25 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 18×20 16×31.5 18×25 16×35.5 18×31.5 16×40 18×35.5 18×40 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.018 0.016 0.021 0.020 0.017 0.016 0.016 0.014 0.014 0.013 0.012 0.011 0.38 0.17 0.075 0.059 0.053 0.041 0.038 0.028 0.035 0.026 0.025 0.019 0.018 0.021 0.016 0.017 0.020 0.016 0.016 0.014 0.014 0.013 0.012 0.011 0.38 0.17 0.075 0.059 0.053 0.041 0.038 0.028 0.035 0.026 0.025 0.019 0.018 0.021 0.016 0.017 0.020 0.016 0.016 0.014 0.014 0.013 0.012 0.011 0.054 0.048 0.063 0.060 0.051 0.048 0.048 0.042 0.042 0.039 0.036 0.033 1.2 0.51 0.23 0.18 0.16 0.13 0.12 0.084 0.11 0.072 0.075 0.057 0.054 0.063 0.048 0.051 0.060 0.048 0.048 0.042 0.042 0.039 0.036 0.033 1.2 0.51 0.23 0.18 0.16 0.13 0.12 0.084 0.11 0.072 0.075 0.057 0.054 0.063 0.048 0.051 0.060 0.048 0.048 0.042 0.042 0.039 0.036 0.033 3,660 4,120 3,330 3,450 3,810 4,100 3,880 4,280 4,190 4,580 4,380 4,960 450 700 1,200 1,600 1,700 1,960 2,000 2,500 2,400 2,900 2,600 3,200 3,660 3,330 4,120 3,810 3,450 4,100 3,880 4,280 4,190 4,580 4,380 4,960 450 700 1,200 1,600 1,700 1,960 2,000 2,500 2,400 2,900 2,600 3,200 3,660 3,330 4,120 3,810 3,450 4,100 3,880 4,280 4,190 4,580 4,380 4,960 Part No. EKZN160E□□332MK30S EKZN160E□□392MK35S EKZN160E□□392ML20S EKZN160E□□472MM20S EKZN160E□□562ML25S EKZN160E□□682MLN3S EKZN160E□□682MM25S EKZN160E□□822MLP1S EKZN160E□□822MMN3S EKZN160E□□103ML40S EKZN160E□□103MMP1S EKZN160E□□123MM40S EKZN250E□□680ME11D EKZN250E□□151MF11D EKZN250E□□271MHB5D EKZN250E□□471MH15D EKZN250E□□471MJC5S EKZN250E□□561MH20D EKZN250E□□681MJ16S EKZN250E□□821MJ20S EKZN250E□□102MK16S EKZN250E□□122MJ25S EKZN250E□□152MK20S EKZN250E□□182MK25S EKZN250E□□222MK30S EKZN250E□□222ML20S EKZN250E□□272MK35S EKZN250E□□332ML25S EKZN250E□□332MM20S EKZN250E□□472MLN3S EKZN250E□□472MM25S EKZN250E□□562MLP1S EKZN250E□□562MMN3S EKZN250E□□682ML40S EKZN250E□□682MMP1S EKZN250E□□822MM40S EKZN350E□□470ME11D EKZN350E□□101MF11D EKZN350E□□181MHB5D EKZN350E□□221MH15D EKZN350E□□271MJC5S EKZN350E□□331MH20D EKZN350E□□391MJ16S EKZN350E□□471MJ20S EKZN350E□□561MK16S EKZN350E□□681MJ25S EKZN350E□□821MK20S EKZN350E□□122MK25S EKZN350E□□152MK30S EKZN350E□□152ML20S EKZN350E□□182MK35S EKZN350E□□182ML25S EKZN350E□□182MM20S EKZN350E□□272MLN3S EKZN350E□□272MM25S EKZN350E□□332MLP1S EKZN350E□□332MMN3S EKZN350E□□392ML40S EKZN350E□□392MMP1S EKZN350E□□472MM40S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ KZNSeries Upgrade! ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ 50 63 80 27 56 100 120 150 180 220 330 330 390 470 680 820 820 1,000 1,200 1,200 1,500 1,500 1,800 2,200 2,200 2,700 3,300 18 39 68 100 120 120 180 270 270 330 390 560 680 680 820 820 1,000 1,200 1,200 1,500 1,500 1,800 1,800 2,200 12 27 47 68 82 82 100 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 12.5×16 10×25 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 18×20 16×31.5 18×25 16×35.5 16×40 18×31.5 18×35.5 18×40 5×11 6.3×11 8×11.5 8×15 8×20 10×12.5 10×16 10×20 12.5×16 10×25 12.5×20 12.5×25 12.5×30 16×20 12.5×35 18×20 16×25 16×31.5 18×25 16×35.5 18×31.5 16×40 18×35.5 18×40 5×11 6.3×11 8×11.5 8×15 8×20 10×12.5 10×12.5 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.40 0.18 0.085 0.065 0.073 0.049 0.053 0.038 0.045 0.032 0.032 0.025 0.023 0.026 0.021 0.022 0.025 0.019 0.021 0.016 0.014 0.016 0.013 0.012 0.52 0.24 0.15 0.10 0.077 0.090 0.061 0.045 0.058 0.037 0.033 0.026 0.024 0.027 0.022 0.026 0.024 0.020 0.022 0.018 0.018 0.016 0.017 0.015 0.72 0.34 0.20 0.14 0.12 0.14 0.14 1.3 0.54 0.26 0.20 0.22 0.16 0.16 0.12 0.14 0.10 0.10 0.080 0.074 0.084 0.067 0.070 0.075 0.057 0.063 0.048 0.042 0.048 0.039 0.036 2.3 1.1 0.68 0.45 0.35 0.36 0.25 0.18 0.18 0.12 0.10 0.080 0.075 0.085 0.068 0.078 0.072 0.060 0.066 0.054 0.054 0.048 0.051 0.045 3.2 1.5 0.90 0.63 0.54 0.56 0.56 450 700 1,200 1,600 1,280 1,960 1,650 2,060 2,160 2,420 2,300 2,800 3,370 3,070 3,810 3,510 3,120 4,030 3,530 4,220 4,500 4,080 4,270 4,850 240 420 720 990 1,200 990 1,200 1,570 1,570 1,990 1,990 2,460 2,760 2,380 3,040 2,530 2,890 3,280 2,930 3,440 3,380 3,690 3,550 3,930 235 390 650 820 1,090 860 860 Part No. WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ EKZN500E□□270ME11D EKZN500E□□560MF11D EKZN500E□□101MHB5D EKZN500E□□121MH15D EKZN500E□□151MJC5S EKZN500E□□181MH20D EKZN500E□□221MJ16S EKZN500E□□331MJ20S EKZN500E□□331MK16S EKZN500E□□391MJ25S EKZN500E□□471MK20S EKZN500E□□681MK25S EKZN500E□□821MK30S EKZN500E□□821ML20S EKZN500E□□102MK35S EKZN500E□□122ML25S EKZN500E□□122MM20S EKZN500E□□152MLN3S EKZN500E□□152MM25S EKZN500E□□182MLP1S EKZN500E□□222ML40S EKZN500E□□222MMN3S EKZN500E□□272MMP1S EKZN500E□□332MM40S EKZN630E□□180ME11D EKZN630E□□390MF11D EKZN630E□□680MHB5D EKZN630E□□101MH15D EKZN630E□□121MH20D EKZN630E□□121MJC5S EKZN630E□□181MJ16S EKZN630E□□271MJ20S EKZN630E□□271MK16S EKZN630E□□331MJ25S EKZN630E□□391MK20S EKZN630E□□561MK25S EKZN630E□□681MK30S EKZN630E□□681ML20S EKZN630E□□821MK35S EKZN630E□□821MM20S EKZN630E□□102ML25S EKZN630E□□122MLN3S EKZN630E□□122MM25S EKZN630E□□152MLP1S EKZN630E□□152MMN3S EKZN630E□□182ML40S EKZN630E□□182MMP1S EKZN630E□□222MM40S EKZN800E□□120ME11D EKZN800E□□270MF11D EKZN800E□□470MHB5D EKZN800E□□680MH15D EKZN800E□□820MH20D EKZN800E□□820MJC5S EKZN800E□□101MJC5S 120 10×16 150 10×16 180 10×20 180 12.5×16 220 10×20 220 10×25 220 12.5×16 270 10×25 270 12.5×20 330 12.5×20 390 12.5×25 470 12.5×30 80 470 16×20 560 12.5×35 680 12.5×40 680 16×25 680 18×20 820 16×31.5 820 18×25 1,000 18×25 1,000 16×35.5 1,200 16×40 1,200 18×31.5 1,500 18×35.5 1,800 18×40 8.2 5×11 18 6.3×11 33 8×11.5 47 8×15 56 8×20 56 10×12.5 82 10×16 100 10×20 120 10×20 120 12.5×16 150 10×25 180 12.5×20 220 12.5×25 270 12.5×30 270 16×20 100 330 16×20 390 12.5×35 390 16×25 390 18×20 470 12.5×40 470 16×31.5 560 16×31.5 560 16×35.5 560 18×25 680 16×35.5 680 16×40 680 18×31.5 820 16×40 820 18×35.5 1,000 18×40 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.090 0.090 0.068 0.090 0.068 0.055 0.090 0.055 0.048 0.048 0.038 0.033 0.036 0.026 0.026 0.028 0.032 0.022 0.027 0.027 0.020 0.018 0.020 0.018 0.017 0.72 0.34 0.20 0.14 0.12 0.14 0.090 0.068 0.068 0.090 0.055 0.048 0.038 0.033 0.036 0.036 0.026 0.028 0.032 0.026 0.022 0.022 0.020 0.027 0.020 0.018 0.020 0.018 0.018 0.017 0.36 0.36 0.28 0.27 0.28 0.22 0.27 0.22 0.15 0.15 0.12 0.11 0.12 0.078 0.078 0.084 0.096 0.066 0.081 0.081 0.060 0.054 0.060 0.054 0.051 3.2 1.5 0.90 0.63 0.54 0.56 0.36 0.28 0.28 0.27 0.22 0.15 0.12 0.11 0.12 0.12 0.078 0.084 0.096 0.078 0.066 0.066 0.060 0.081 0.060 0.054 0.060 0.054 0.054 0.051 1,150 1,150 1,570 1,430 1,570 1,780 1,430 1,780 1,800 1,800 2,210 2,520 2,150 2,860 3,150 2,620 2,280 2,900 2,750 2,750 3,150 3,710 3,150 3,710 4,060 235 390 650 820 1,090 860 1,150 1,570 1,570 1,430 1,780 1,800 2,210 2,520 2,150 2,150 2,860 2,620 2,280 3,150 2,900 2,900 3,150 2,750 3,150 3,710 3,150 3,710 3,710 4,060 Part No. EKZN800E□□121MJ16S EKZN800E□□151MJ16S EKZN800E□□181MJ20S EKZN800E□□181MK16S EKZN800E□□221MJ20S EKZN800E□□221MJ25S EKZN800E□□221MK16S EKZN800E□□271MJ25S EKZN800E□□271MK20S EKZN800E□□331MK20S EKZN800E□□391MK25S EKZN800E□□471MK30S EKZN800E□□471ML20S EKZN800E□□561MK35S EKZN800E□□681MK40S EKZN800E□□681ML25S EKZN800E□□681MM20S EKZN800E□□821MLN3S EKZN800E□□821MM25S EKZN800E□□102MM25S EKZN800E□□102MLP1S EKZN800E□□122ML40S EKZN800E□□122MMN3S EKZN800E□□152MMP1S EKZN800E□□182MM40S EKZN101E□□8R2ME11D EKZN101E□□180MF11D EKZN101E□□330MHB5D EKZN101E□□470MH15D EKZN101E□□560MH20D EKZN101E□□560MJC5S EKZN101E□□820MJ16S EKZN101E□□101MJ20S EKZN101E□□121MJ20S EKZN101E□□121MK16S EKZN101E□□151MJ25S EKZN101E□□181MK20S EKZN101E□□221MK25S EKZN101E□□271MK30S EKZN101E□□271ML20S EKZN101E□□331ML20S EKZN101E□□391MK35S EKZN101E□□391ML25S EKZN101E□□391MM20S EKZN101E□□471MK40S EKZN101E□□471MLN3S EKZN101E□□561MLN3S EKZN101E□□561MLP1S EKZN101E□□561MM25S EKZN101E□□681MLP1S EKZN101E□□681ML40S EKZN101E□□681MMN3S EKZN101E□□821ML40S EKZN101E□□821MMP1S EKZN101E□□102MM40S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ KZNSeries Upgrade! ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 8.2 to 180 220 to 560 680 to 1,800 2,200 to 3,900 4,700 to 22,000 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KZM Low impedance, 105℃ KZN Series Higher ripple ・Long-Life version of KZH series ・Endurance with ripple current : 6,000 to 10,000 hours at 105℃ ・Newly innovative electrolyte is employed to minimize ESR ・Rated voltage range : 6.3 to 50Vdc, Nominal capacitance range : 27 to 10,000µF ・Non solvent resistant type ・RoHS2 Compliant KZM Longer life KZH ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 6.3 to 50Vdc ±20% (M) I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V tanδ (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. Z (-25℃) / Z (+20℃) 2max. Z (-40℃) / Z (+20℃) 3max. Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃. Time φ5 &φ6.3 : 6,000hours φ8 : 8,000hours φ10 to φ18 : 10,000hours Capacitance change ≦±25% of the initial value (6.3, 10Vdc : ≦± 30%) D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±25% of the initial value (6.3, 10Vdc : ≦±30%) D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φD' φd Sleeve(PET : Brown) F±0.5 ●Terminal Code : E L' 15min. 4min. (φ5 to φ10) (φ12.5 to φ18) φD 5 φd 0.5 2.0 F φD' L' 6.3 0.5 2.5 10 12.5 16 8 0.6 0.6 0.6 0.8 3.5 5.0 5.0 7.5 φD+0.5max. L+1.5max. 18 0.8 7.5 Gas escape end seal Vent (Exceptφ5 &φ6.3) ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KZM AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100µF:101, 1,000µF:102) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3, 10V:100) Series code Category Please refer to "Product code guide (radial lead type)" ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 27 to 180 220 to 560 680 to 1,800 2,200 to 3,900 4,700 to 10,000 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 Note : The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ KZMSeries ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 Cap (µF) Case size φD×L(mm) tanδ 220 470 820 1,200 1,200 1,500 1,800 2,200 2,700 3,900 4,700 5,600 6,800 6,800 8,200 10,000 150 330 680 1,000 1,000 1,500 1,500 1,800 2,200 3,300 3,900 4,700 4,700 5,600 6,800 8,200 100 220 470 680 680 1,000 1,000 1,500 1,800 2,200 2,700 3,300 3,300 3,900 4,700 5,600 5× 11 6.3×11 8×11.5 8×15 10 ×12.5 8× 20 10 × 16 10 ×20 10 ×25 12.5 ×20 12.5 ×25 12.5× 30 12.5× 35 16 × 20 16 ×25 18 ×25 5×11 6.3 ×11 8×11.5 8×15 10× 12.5 8× 20 10 × 16 10 × 20 10 × 25 12.5× 20 12.5× 25 12.5× 30 16 ×20 12.5×35 16 ×25 18 ×25 5×11 6.3 ×11 8×11.5 8×15 10 ×12.5 8×20 10× 16 10 × 20 10 × 25 12.5× 20 12.5× 25 12.5× 30 16 × 20 12.5× 35 16 ×25 18 ×25 0.22 0.22 0.22 0.22 0.22 0.22 0.22 0.24 0.24 0.26 0.28 0.30 0.32 0.32 0.36 0.40 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.21 0.23 0.23 0.25 0.25 0.27 0.29 0.33 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.18 0.18 0.20 0.20 0.20 0.22 0.24 Impedance (Ω max./100kHz) 20℃ -10℃ 0.22 0.094 0.056 0.045 0.039 0.029 0.028 0.020 0.018 0.017 0.015 0.013 0.012 0.015 0.013 0.012 0.22 0.094 0.056 0.045 0.039 0.029 0.028 0.020 0.018 0.017 0.015 0.013 0.015 0.012 0.013 0.012 0.22 0.094 0.056 0.045 0.039 0.029 0.028 0.020 0.018 0.017 0.015 0.013 0.015 0.012 0.013 0.012 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.031 0.038 0.035 0.031 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.038 0.031 0.035 0.031 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.038 0.031 0.035 0.031 Rated ripple current (mArms/105℃, 100kHz) Part No. 345 540 945 1,250 1,330 1,500 1,760 1,960 2,250 2,480 2,900 3,450 3,570 3,250 3,630 3,650 345 540 945 1,250 1,330 1,500 1,760 1,960 2,250 2,480 2,900 3,450 3,250 3,570 3,630 3,650 345 540 945 1,250 1,330 1,500 1,760 1,960 2,250 2,480 2,900 3,450 3,250 3,570 3,630 3,650 EKZM6R3E□□221ME11D EKZM6R3E□□471MF11D EKZM6R3E□□821MHB5D EKZM6R3E□□122MH15D EKZM6R3E□□122MJC5S EKZM6R3E□□152MH20D EKZM6R3E□□182MJ16S EKZM6R3E□□222MJ20S EKZM6R3E□□272MJ25S EKZM6R3E□□392MK20S EKZM6R3E□□472MK25S EKZM6R3E□□562MK30S EKZM6R3E□□682MK35S EKZM6R3E□□682ML20S EKZM6R3E□□822ML25S EKZM6R3E□□103MM25S EKZM100E□□151ME11D EKZM100E□□331MF11D EKZM100E□□681MHB5D EKZM100E□□102MH15D EKZM100E□□102MJC5S EKZM100E□□152MH20D EKZM100E□□152MJ16S EKZM100E□□182MJ20S EKZM100E□□222MJ25S EKZM100E□□332MK20S EKZM100E□□392MK25S EKZM100E□□472MK30S EKZM100E□□472ML20S EKZM100E□□562MK35S EKZM100E□□682ML25S EKZM100E□□822MM25S EKZM160E□□101ME11D EKZM160E□□221MF11D EKZM160E□□471MHB5D EKZM160E□□681MH15D EKZM160E□□681MJC5S EKZM160E□□102MH20D EKZM160E□□102MJ16S EKZM160E□□152MJ20S EKZM160E□□182MJ25S EKZM160E□□222MK20S EKZM160E□□272MK25S EKZM160E□□332MK30S EKZM160E□□332ML20S EKZM160E□□392MK35S EKZM160E□□472ML25S EKZM160E□□562MM25S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ KZMSeries ◆STANDARD RATINGS WV (Vdc) 25 35 50 Cap (µF) Case size φD×L(mm) tanδ 68 150 330 390 470 560 680 820 1,000 1,500 1,800 2,200 2,200 2,700 3,300 3,900 47 100 220 270 330 390 470 560 680 1,000 1,200 1,500 1,500 1,800 2,200 2,700 27 56 100 120 150 180 220 270 330 470 560 680 820 820 1,000 1,500 5× 11 6.3× 11 8× 11.5 8× 15 10 × 12.5 8× 20 10 ×16 10 ×20 10 ×25 12.5 ×20 12.5 ×25 12.5 ×30 16 ×20 12.5 ×35 16× 25 18× 25 5× 11 6.3× 11 8× 11.5 8× 15 10 × 12.5 8× 20 10 ×16 10 ×20 10 ×25 12.5×20 12.5×25 12.5×30 16 ×20 12.5 ×35 16 ×25 18× 25 5×11 6.3 ×11 8×11.5 8×15 10 ×12.5 8× 20 10× 16 10 × 20 10 × 25 12.5×20 12.5×25 12.5×30 12.5×35 16 ×20 16 ×25 18 ×25 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.16 0.16 0.18 0.18 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 Impedance (Ω max./100kHz) 20℃ -10℃ 0.22 0.094 0.056 0.045 0.039 0.029 0.028 0.020 0.018 0.017 0.015 0.013 0.015 0.012 0.013 0.012 0.22 0.094 0.056 0.045 0.039 0.029 0.028 0.020 0.018 0.017 0.015 0.013 0.015 0.012 0.013 0.012 0.34 0.14 0.074 0.061 0.061 0.046 0.042 0.030 0.028 0.027 0.023 0.021 0.019 0.023 0.021 0.019 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.038 0.031 0.035 0.031 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.038 0.031 0.035 0.031 1.18 0.50 0.22 0.18 0.18 0.14 0.12 0.090 0.085 0.068 0.059 0.052 0.051 0.059 0.056 0.051 Rated ripple current (mArms/105℃, 100kHz) Part No. 345 540 945 1,250 1,330 1,500 1,760 1,960 2,250 2,480 2,900 3,450 3,250 3,570 3,630 3,650 345 540 945 1,250 1,330 1,500 1,760 1,960 2,250 2,480 2,900 3,450 3,250 3,570 3,630 3,650 238 385 724 950 979 1,190 1,370 1,580 1,870 2,050 2,410 2,860 2,960 2,730 3,010 3,290 EKZM250E□□680ME11D EKZM250E□□151MF11D EKZM250E□□331MHB5D EKZM250E□□391MH15D EKZM250E□□471MJC5S EKZM250E□□561MH20D EKZM250E□□681MJ16S EKZM250E□□821MJ20S EKZM250E□□102MJ25S EKZM250E□□152MK20S EKZM250E□□182MK25S EKZM250E□□222MK30S EKZM250E□□222ML20S EKZM250E□□272MK35S EKZM250E□□332ML25S EKZM250E□□392MM25S EKZM350E□□470ME11D EKZM350E□□101MF11D EKZM350E□□221MHB5D EKZM350E□□271MH15D EKZM350E□□331MJC5S EKZM350E□□391MH20D EKZM350E□□471MJ16S EKZM350E□□561MJ20S EKZM350E□□681MJ25S EKZM350E□□102MK20S EKZM350E□□122MK25S EKZM350E□□152MK30S EKZM350E□□152ML20S EKZM350E□□182MK35S EKZM350E□□222ML25S EKZM350E□□272MM25S EKZM500E□□270ME11D EKZM500E□□560MF11D EKZM500E□□101MHB5D EKZM500E□□121MH15D EKZM500E□□151MJC5S EKZM500E□□181MH20D EKZM500E□□221MJ16S EKZM500E□□271MJ20S EKZM500E□□331MJ25S EKZM500E□□471MK20S EKZM500E□□561MK25S EKZM500E□□681MK30S EKZM500E□□821MK35S EKZM500E□□821ML20S EKZM500E□□102ML25S EKZM500E□□152MM25S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KZH Low impedance, 105℃ KZM Series Longer life KZH ・Newly innovative electrolyte is employed to minimize impedance ・Endurance with ripple current: 5,000 to 6,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant Lower Z KZE ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 6.3 to 35Vdc ±20% (M) I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V tanδ(Max.) 0.22 0.19 0.16 0.14 0.12 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. Z (-25℃) / Z (+20℃) 2max. Z (-40℃) / Z (+20℃) 3max. Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage)for the specified period of time at 105℃. Time φ5 &φ6.3 : 5,000hoursφ8 to φ16 : 6,000hours Capacitance change ≦±25% of the initial value (6.3, 10Vdc :≦±30%) D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±25% of the initial value (6.3, 10Vdc :≦±30%) D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life F±0.5 φD' φd ●Terminal Code : E Sleeve (PET : Brown) F±0.5 ◆DIMENSIONS [mm] L' Vent (Exceptφ5 &φ6.3) 15min 4min (φ5 to φ10) (φ12.5 to φ16) φD φd F φD' L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 φD+0.5max. L+1.5max. 16 0.8 7.5 Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KZH AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470, 100µF:101, 1,000µF:102) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3, 35V:350) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ KZHSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ 6.3 10 16 220 470 820 1,200 1,200 1,500 1,800 2,200 2,700 3,900 4,700 5,600 6,800 6,800 8,200 150 330 680 1,000 1,000 1,500 1,500 1,800 2,200 3,300 3,900 4,700 4,700 5,600 6,800 100 220 470 680 680 1,000 1,000 1,500 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 12.5×20 12.5×25 12.5×30 12.5×35 16×20 16×25 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 0.24 0.11 0.062 0.048 0.045 0.033 0.032 0.020 0.018 0.017 0.015 0.013 0.012 0.015 0.013 0.24 0.11 0.062 0.048 0.045 0.033 0.032 0.020 0.018 0.017 0.015 0.013 0.015 0.012 0.013 0.24 0.11 0.062 0.048 0.045 0.033 0.032 0.020 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.031 0.038 0.035 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.038 0.031 0.035 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 330 500 900 1,210 1,240 1,410 1,650 1,960 2,250 2,480 2,900 3,450 3,570 3,250 3,630 330 500 900 1,210 1,240 1,410 1,650 1,960 2,250 2,480 2,900 3,450 3,250 3,570 3,630 330 500 900 1,210 1,240 1,410 1,650 1,960 Part No. WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ EKZH6R3E□□221ME11D EKZH6R3E□□471MF11D EKZH6R3E□□821MHB5D EKZH6R3E□□122MH15D EKZH6R3E□□122MJC5S EKZH6R3E□□152MH20D EKZH6R3E□□182MJ16S EKZH6R3E□□222MJ20S EKZH6R3E□□272MJ25S EKZH6R3E□□392MK20S EKZH6R3E□□472MK25S EKZH6R3E□□562MK30S EKZH6R3E□□682MK35S EKZH6R3E□□682ML20S EKZH6R3E□□822ML25S EKZH100E□□151ME11D EKZH100E□□331MF11D EKZH100E□□681MHB5D EKZH100E□□102MH15D EKZH100E□□102MJC5S EKZH100E□□152MH20D EKZH100E□□152MJ16S EKZH100E□□182MJ20S EKZH100E□□222MJ25S EKZH100E□□332MK20S EKZH100E□□392MK25S EKZH100E□□472MK30S EKZH100E□□472ML20S EKZH100E□□562MK35S EKZH100E□□682ML25S EKZH160E□□101ME11D EKZH160E□□221MF11D EKZH160E□□471MHB5D EKZH160E□□681MH15D EKZH160E□□681MJC5S EKZH160E□□102MH20D EKZH160E□□102MJ16S EKZH160E□□152MJ20S 16 25 35 1,800 2,200 2,700 3,300 3,300 3,900 4,700 68 150 330 390 470 560 680 820 1,000 1,500 1,800 2,200 2,200 2,700 3,300 47 100 220 270 330 390 470 560 680 1,000 1,200 1,500 1,500 1,800 2,200 10×25 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.018 0.017 0.015 0.013 0.015 0.012 0.013 0.24 0.11 0.062 0.048 0.045 0.033 0.032 0.020 0.018 0.017 0.015 0.013 0.015 0.012 0.013 0.24 0.11 0.062 0.048 0.045 0.033 0.032 0.020 0.018 0.017 0.015 0.013 0.015 0.012 0.013 0.054 0.043 0.038 0.033 0.038 0.031 0.035 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.038 0.031 0.035 0.80 0.35 0.19 0.15 0.14 0.11 0.10 0.060 0.054 0.043 0.038 0.033 0.038 0.031 0.035 2,250 2,480 2,900 3,450 3,250 3,570 3,630 330 500 900 1,210 1,240 1,410 1,650 1,960 2,250 2,480 2,900 3,450 3,250 3,570 3,630 330 500 900 1,210 1,240 1,410 1,650 1,960 2,250 2,480 2,900 3,450 3,250 3,570 3,630 Part No. EKZH160E□□182MJ25S EKZH160E□□222MK20S EKZH160E□□272MK25S EKZH160E□□332MK30S EKZH160E□□332ML20S EKZH160E□□392MK35S EKZH160E□□472ML25S EKZH250E□□680ME11D EKZH250E□□151MF11D EKZH250E□□331MHB5D EKZH250E□□391MH15D EKZH250E□□471MJC5S EKZH250E□□561MH20D EKZH250E□□681MJ16S EKZH250E□□821MJ20S EKZH250E□□102MJ25S EKZH250E□□152MK20S EKZH250E□□182MK25S EKZH250E□□222MK30S EKZH250E□□222ML20S EKZH250E□□272MK35S EKZH250E□□332ML25S EKZH350E□□470ME11D EKZH350E□□101MF11D EKZH350E□□221MHB5D EKZH350E□□271MH15D EKZH350E□□331MJC5S EKZH350E□□391MH20D EKZH350E□□471MJ16S EKZH350E□□561MJ20S EKZH350E□□681MJ25S EKZH350E□□102MK20S EKZH350E□□122MK25S EKZH350E□□152MK30S EKZH350E□□152ML20S EKZH350E□□182MK35S EKZH350E□□222ML25S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 0.47 to 150 220 to 560 680 to 1,800 2,200 to 3,900 4,700 to 8,200 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KZE Low impedance, 105℃ KZH Series Lower Z KZE ・Newly innovative electrolyte is employed to minimize impedance ・Endurance with ripple current: 2,000 to 5,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant Lower Z KY ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 6.3 to 100Vdc ±20% (M) I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V tanδ (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. Z (-25℃) / Z (+20℃) 2max. Z (-40℃) / Z (+20℃) 3max. Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃. Time φ5 &φ6.3 : 2,000hours φ8 : 3,000hours φ10 : 4,000hours φ12.5 toφ18 : 5,000hours Capacitance change ≦±25% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±25% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 (φ5 to φ10) (φ12.5 to φ18) φD' φd Sleeve (PET : Brown) F±0.5 ●Terminal Code : E L' Vent (Except φ5 &φ6.3) φD φd F φD' L' 5 0.5 2.0 15min 4min Gas escape end seal 6.3 0.5 2.5 8 10, 12.5 0.6 0.6 3.5 5.0 φD+0.5max. L+1.5max. 16, 18 0.8 7.5 ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KZ E AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6.8µF:6R8, 10µF:100, 1,000µF:102) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3, 10V:100, 100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ KZESeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ 6.3 10 16 25 35 150 330 560 820 1,000 1,200 1,200 1,500 2,200 3,300 3,900 4,700 5,600 5,600 6,800 100 220 470 680 680 1,000 1,000 1,200 1,500 2,200 3,300 3,900 3,900 4,700 5,600 56 120 330 470 470 680 680 1,000 1,200 1,500 2,200 2,700 2,700 3,300 3,900 47 100 220 330 330 470 470 680 820 1,000 1,500 1,800 1,800 2,200 2,700 33 56 150 220 220 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 12.5×20 12.5×25 12.5×30 12.5×35 16×20 16×25 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 5×11 6.3×11 8×11.5 8×15 10×12.5 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.30 0.13 0.072 0.056 0.053 0.041 0.038 0.023 0.022 0.021 0.018 0.016 0.015 0.018 0.016 0.30 0.13 0.072 0.056 0.053 0.041 0.038 0.023 0.022 0.021 0.018 0.016 0.018 0.015 0.016 0.30 0.13 0.072 0.056 0.053 0.041 0.038 0.023 0.022 0.021 0.018 0.016 0.018 0.015 0.016 0.30 0.13 0.072 0.056 0.053 0.041 0.038 0.023 0.022 0.021 0.018 0.016 0.018 0.015 0.016 0.30 0.13 0.072 0.056 0.053 1.0 0.41 0.22 0.17 0.16 0.13 0.12 0.069 0.066 0.053 0.045 0.041 0.039 0.045 0.043 1.0 0.41 0.22 0.17 0.16 0.13 0.12 0.069 0.066 0.053 0.045 0.041 0.045 0.039 0.043 1.0 0.41 0.22 0.17 0.16 0.13 0.12 0.069 0.066 0.053 0.045 0.041 0.045 0.039 0.043 1.0 0.41 0.22 0.17 0.16 0.13 0.12 0.069 0.066 0.053 0.045 0.041 0.045 0.039 0.043 1.0 0.41 0.22 0.17 0.16 250 405 760 995 1,030 1,250 1,430 1,820 2,150 2,360 2,770 3,290 3,400 3,140 3,460 250 405 760 995 1,030 1,250 1,430 1,820 2,150 2,360 2,770 3,290 3,140 3,400 3,460 250 405 760 995 1,030 1,250 1,430 1,820 2,150 2,360 2,770 3,290 3,140 3,400 3,460 250 405 760 995 1,030 1,250 1,430 1,820 2,150 2,360 2,770 3,290 3,140 3,400 3,460 250 405 760 995 1,030 Part No. WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ EKZE6R3E□□151ME11D EKZE6R3E□□331MF11D EKZE6R3E□□561MHB5D EKZE6R3E□□821MH15D EKZE6R3E□□102MJC5S EKZE6R3E□□122MH20D EKZE6R3E□□122MJ16S EKZE6R3E□□152MJ20S EKZE6R3E□□222MJ25S EKZE6R3E□□332MK20S EKZE6R3E□□392MK25S EKZE6R3E□□472MK30S EKZE6R3E□□562MK35S EKZE6R3E□□562ML20S EKZE6R3E□□682ML25S EKZE100E□□101ME11D EKZE100E□□221MF11D EKZE100E□□471MHB5D EKZE100E□□681MH15D EKZE100E□□681MJC5S EKZE100E□□102MH20D EKZE100E□□102MJ16S EKZE100E□□122MJ20S EKZE100E□□152MJ25S EKZE100E□□222MK20S EKZE100E□□332MK25S EKZE100E□□392MK30S EKZE100E□□392ML20S EKZE100E□□472MK35S EKZE100E□□562ML25S EKZE160E□□560ME11D EKZE160E□□121MF11D EKZE160E□□331MHB5D EKZE160E□□471MH15D EKZE160E□□471MJC5S EKZE160E□□681MH20D EKZE160E□□681MJ16S EKZE160E□□102MJ20S EKZE160E□□122MJ25S EKZE160E□□152MK20S EKZE160E□□222MK25S EKZE160E□□272MK30S EKZE160E□□272ML20S EKZE160E□□332MK35S EKZE160E□□392ML25S EKZE250E□□470ME11D EKZE250E□□101MF11D EKZE250E□□221MHB5D EKZE250E□□331MH15D EKZE250E□□331MJC5S EKZE250E□□471MH20D EKZE250E□□471MJ16S EKZE250E□□681MJ20S EKZE250E□□821MJ25S EKZE250E□□102MK20S EKZE250E□□152MK25S EKZE250E□□182MK30S EKZE250E□□182ML20S EKZE250E□□222MK35S EKZE250E□□272ML25S EKZE350E□□330ME11D EKZE350E□□560MF11D EKZE350E□□151MHB5D EKZE350E□□221MH15D EKZE350E□□221MJC5S 35 50 63 80 270 330 470 560 680 1,000 1,200 1,200 1,500 1,800 22 56 100 120 150 180 220 270 330 470 560 680 820 820 1,000 15 33 56 82 82 120 120 180 180 220 270 390 470 470 560 680 680 680 820 820 1,000 1,200 1,200 1,500 1,800 68 100 120 150 150 220 330 330 390 470 470 470 560 680 680 8×20 10×16 10×20 10×25 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 12.5×20 12.5×25 12.5×30 12.5×35 16×20 16×25 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 12.5×16 10×25 12.5×20 12.5×25 12.5×30 16×20 12.5×35 12.5×40 16×25 18×20 16×31.5 18×25 16×35.5 16×40 18×31.5 18×35.5 18×40 10×12.5 10×16 10×20 10×25 12.5×16 12.5×20 12.5×25 16×20 12.5×30 12.5×35 16×25 18×20 12.5×40 16×31.5 18×25 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.041 0.038 0.023 0.022 0.021 0.018 0.016 0.018 0.015 0.016 0.34 0.14 0.074 0.061 0.061 0.046 0.042 0.030 0.028 0.027 0.023 0.021 0.019 0.023 0.021 0.88 0.35 0.22 0.16 0.11 0.12 0.076 0.056 0.072 0.046 0.041 0.031 0.028 0.032 0.024 0.021 0.025 0.030 0.021 0.024 0.019 0.018 0.020 0.018 0.017 0.17 0.11 0.084 0.069 0.11 0.062 0.047 0.048 0.042 0.036 0.038 0.045 0.032 0.032 0.036 0.13 0.12 0.069 0.066 0.053 0.045 0.041 0.045 0.039 0.043 1.18 0.50 0.22 0.18 0.18 0.14 0.12 0.090 0.085 0.068 0.059 0.052 0.051 0.059 0.056 3.5 1.4 0.88 0.64 0.44 0.48 0.31 0.23 0.29 0.19 0.13 0.093 0.084 0.096 0.072 0.063 0.075 0.090 0.063 0.072 0.057 0.054 0.060 0.054 0.051 0.66 0.47 0.34 0.28 0.34 0.18 0.14 0.15 0.13 0.11 0.12 0.14 0.095 0.095 0.11 1,250 1,430 1,820 2,150 2,360 2,770 3,290 3,140 3,400 3,460 238 385 724 950 979 1,190 1,370 1,580 1,870 2,050 2,410 2,860 2,960 2,730 3,010 165 265 500 665 690 820 950 1,150 1,150 1,350 1,500 1,900 2,300 2,000 2,500 2,800 2,600 2,500 2,850 2,800 2,900 3,400 3,300 3,400 3,500 480 600 800 900 750 1,100 1,250 1,350 1,500 1,650 1,700 1,500 1,800 1,850 1,750 Part No. EKZE350E□□271MH20D EKZE350E□□331MJ16S EKZE350E□□471MJ20S EKZE350E□□561MJ25S EKZE350E□□681MK20S EKZE350E□□102MK25S EKZE350E□□122MK30S EKZE350E□□122ML20S EKZE350E□□152MK35S EKZE350E□□182ML25S EKZE500E□□220ME11D EKZE500E□□560MF11D EKZE500E□□101MHB5D EKZE500E□□121MH15D EKZE500E□□151MJC5S EKZE500E□□181MH20D EKZE500E□□221MJ16S EKZE500E□□271MJ20S EKZE500E□□331MJ25S EKZE500E□□471MK20S EKZE500E□□561MK25S EKZE500E□□681MK30S EKZE500E□□821MK35S EKZE500E□□821ML20S EKZE500E□□102ML25S EKZE630E□□150ME11D EKZE630E□□330MF11D EKZE630E□□560MHB5D EKZE630E□□820MH15D EKZE630E□□820MJC5S EKZE630E□□121MH20D EKZE630E□□121MJ16S EKZE630E□□181MJ20S EKZE630E□□181MK16S EKZE630E□□221MJ25S EKZE630E□□271MK20S EKZE630E□□391MK25S EKZE630E□□471MK30S EKZE630E□□471ML20S EKZE630E□□561MK35S EKZE630E□□681MK40S EKZE630E□□681ML25S EKZE630E□□681MM20S EKZE630E□□821MLN3S EKZE630E□□821MM25S EKZE630E□□102MLP1S EKZE630E□□122ML40S EKZE630E□□122MMN3S EKZE630E□□152MMP1S EKZE630E□□182MM40S EKZE800E□□680MJC5S EKZE800E□□101MJ16S EKZE800E□□121MJ20S EKZE800E□□151MJ25S EKZE800E□□151MK16S EKZE800E□□221MK20S EKZE800E□□331MK25S EKZE800E□□331ML20S EKZE800E□□391MK30S EKZE800E□□471MK35S EKZE800E□□471ML25S EKZE800E□□471MM20S EKZE800E□□561MK40S EKZE800E□□681MLN3S EKZE800E□□681MM25S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ KZESeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ 820 16×35.5 820 18×31.5 80 1,000 16×40 1,000 18×35.5 1,200 18×40 6.8 5×11 15 6.3×11 27 8×11.5 39 8×15 47 10×12.5 100 56 8×20 68 10×16 82 10×20 100 12.5×16 120 10×25 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.029 0.030 0.027 0.027 0.026 1.4 0.57 0.36 0.25 0.17 0.19 0.11 0.084 0.11 0.069 0.086 0.090 0.081 0.081 0.077 5.6 2.3 1.4 1.0 0.66 0.76 0.47 0.34 0.34 0.28 2,000 1,900 2,200 2,200 2,700 125 205 355 450 480 565 600 800 750 900 Part No. WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ EKZE800E□□821MLP1S EKZE800E□□821MMN3S EKZE800E□□102ML40S EKZE800E□□102MMP1S EKZE800E□□122MM40S EKZE101E□□6R8ME11D EKZE101E□□150MF11D EKZE101E□□270MHB5D EKZE101E□□390MH15D EKZE101E□□470MJC5S EKZE101E□□560MH20D EKZE101E□□680MJ16S EKZE101E□□820MJ20S EKZE101E□□101MK16S EKZE101E□□121MJ25S 100 150 220 220 270 330 330 330 390 470 470 560 560 680 680 820 12.5×20 12.5×25 16×20 12.5×30 12.5×35 16×25 18×20 12.5×40 16×31.5 18×25 16×35.5 18×31.5 16×40 18×35.5 18×40 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.062 0.047 0.048 0.042 0.036 0.038 0.045 0.032 0.032 0.036 0.029 0.030 0.027 0.027 0.026 0.18 0.14 0.15 0.13 0.11 0.12 0.14 0.095 0.095 0.11 0.086 0.090 0.081 0.081 0.077 1,100 1,250 1,350 1,500 1,650 1,700 1,500 1,800 1,850 1,750 2,000 1,900 2,200 2,200 2,700 Part No. EKZE101E□□151MK20S EKZE101E□□221MK25S EKZE101E□□221ML20S EKZE101E□□271MK30S EKZE101E□□331MK35S EKZE101E□□331ML25S EKZE101E□□331MM20S EKZE101E□□391MK40S EKZE101E□□471MLN3S EKZE101E□□471MM25S EKZE101E□□561MLP1S EKZE101E□□561MMN3S EKZE101E□□681ML40S EKZE101E□□681MMP1S EKZE101E□□821MM40S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 6.8 to 180 220 to 560 680 to 1,800 2,200 to 3,900 4,700 to 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low ESR, 105℃ KYC Series ・New highly reliable electrolyte is employed to minimize ESR and maximize ripple current. ・For motercycle ACG starter. ・Endurance with ripple current : 3,000 to 5,000 hours at 105℃ ・Rated voltage range : 16 to 50V, Capacitance range : 180 to 12,000μF ・Non solvent resistant type ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 16 to 50Vdc (at 20℃, 120Hz) ±20% (M) I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage (Vdc) 16V 25V 35V 50V tanδ(Max.) 0.16 0.14 0.12 0.10 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Rated voltage 16V 25V 35V 50V （Vdc） Z (-25℃) / Z (+20℃) 3 2 2 2 Z (-40℃) / Z (+20℃) 8 5 4 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours (3,000 hours for φ10) at 105℃. Capacitance change ≦±25% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±25% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life F±0.5 φD' φd ●Terminal Code : E Sleeve (PET : Brown) F±0.5 ◆DIMENSIONS [mm] L' Vent 15min 4min (φ10) (φ12.5 to φ18) φD φd F φD' L' 10 0.6 5.0 18 12.5 16 0.6 0.8 0.8 5.0 7.5 7.5 φD+0.5max. L+1.5max. Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KYC AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 560µF:561, 2,000µF:202) Lead forming·taping code Terminal code Voltage code (ex. 35V:350, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" KYC series is the product, based on AEC-Q200 standard, for specific applications or market such as compact mobility. Please contact us when selecting KYC series for the important applications related to automotive or its safety. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low ESR 105℃ KYCSeries ◆STANDARD RATINGS WV (Vdc) 16 25 Cap (µF) ESR Case size (Ω max./ 20℃, φD×L(mm) 100kHz) 910 1,300 2,000 3,300 4,700 5,600 5,600 6,800 7,500 9,100 10,000 12,000 560 820 1,300 2,000 3,000 3,600 3,900 4,700 5,100 6,200 6,200 8,200 10×12.5 10×16 10×20 12.5×20 12.5×25 12.5×30 16×20 18×20 16×25 16×30 18×25 18×30 10×12.5 10×16 10×20 12.5×20 12.5×25 16×20 12.5×30 18×20 16×25 16×30 18×25 18×30 0.14 0.10 0.065 0.050 0.037 0.029 0.038 0.037 0.031 0.025 0.030 0.024 0.14 0.10 0.065 0.050 0.037 0.038 0.029 0.037 0.031 0.025 0.030 0.024 Rated ripple current (mArms/ 105℃, 100kHz) Part No. 1,120 1,570 1,940 2,150 2,820 3,120 2,530 2,700 3,240 3,580 3,350 3,710 1,120 1,570 1,940 2,150 2,820 2,530 3,120 2,700 3,240 3,580 3,350 3,710 EKYC160E□□911MJC5S EKYC160E□□132MJ16S EKYC160E□□202MJ20S EKYC160E□□332MK20S EKYC160E□□472MK25S EKYC160E□□562MK30S EKYC160E□□562ML20S EKYC160E□□682MM20S EKYC160E□□752ML25S EKYC160E□□912ML30S EKYC160E□□103MM25S EKYC160E□□123MM30S EKYC250E□□561MJC5S EKYC250E□□821MJ16S EKYC250E□□132MJ20S EKYC250E□□202MK20S EKYC250E□□302MK25S EKYC250E□□362ML20S EKYC250E□□392MK30S EKYC250E□□472MM20S EKYC250E□□512ML25S EKYC250E□□622ML30S EKYC250E□□622MM25S EKYC250E□□822MM30S WV (Vdc) 35 50 Cap (µF) ESR Case size (Ω max./ 20℃, φD×L(mm) 100kHz) 390 560 820 1,300 1,800 2,200 2,400 3,000 3,300 3,900 4,300 5,100 180 300 430 680 910 1,200 1,300 1,500 1,600 2,000 2,200 2,700 10×12.5 10×16 10×20 12.5×20 12.5×25 16×20 12.5×30 18×20 16×25 16×30 18×25 18×30 10×12.5 10×16 10×20 12.5×20 12.5×25 16×20 12.5×30 18×20 16×25 16×30 18×25 18×30 0.14 0.10 0.065 0.050 0.037 0.038 0.029 0.037 0.031 0.025 0.030 0.024 0.14 0.10 0.065 0.050 0.037 0.038 0.029 0.037 0.031 0.025 0.030 0.024 Rated ripple current (mArms/ 105℃, 100kHz) Part No. 1,120 1,570 1,940 2,150 2,820 2,530 3,120 2,700 3,240 3,580 3,350 3,710 1,120 1,570 1,940 2,150 2,820 2,530 3,120 2,700 3,240 3,580 3,350 3,710 EKYC350E□□391MJC5S EKYC350E□□561MJ16S EKYC350E□□821MJ20S EKYC350E□□132MK20S EKYC350E□□182MK25S EKYC350E□□222ML20S EKYC350E□□242MK30S EKYC350E□□302MM20S EKYC350E□□332ML25S EKYC350E□□392ML30S EKYC350E□□432MM25S EKYC350E□□512MM30S EKYC500E□□181MJC5S EKYC500E□□301MJ16S EKYC500E□□431MJ20S EKYC500E□□681MK20S EKYC500E□□911MK25S EKYC500E□□122ML20S EKYC500E□□132MK30S EKYC500E□□152MM20S EKYC500E□□162ML25S EKYC500E□□202ML30S EKYC500E□□222MM25S EKYC500E□□272MM30S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 180 300 to 560 680 to 2,000 2,200 to 4,300 4,700 to 12,000 120 0.40 0.50 0.60 0.75 0.85 1k 0.82 0.85 0.87 0.90 0.95 10k 0.93 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. KYC series is the product, based on AEC-Q200 standard, for specific applications or market such as compact mobility. Please contact us when selecting KYC series for the important applications related to automotive or its safety. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KYB Low impedance, 105℃ Series KYB ・Low impedance, high ripple and long life from KYA series ・Newly innovative electrolyte is employed to minimize impedance ・Endurance with ripple current : 4,000 to 10,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant Lower Z KYA ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 6.3 to 100Vdc (at 20℃, 120Hz) ±20% (M) I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V tanδ (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V Z(-25℃)/Z(+20℃) 4 3 2 2 2 2 2 2 2 Z(-40℃)/Z(+20℃) 8 6 4 3 3 3 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃. Rated Voltage(Vdc) 6.3 to 10Vdc 16 to 100Vdc Time φ5: 4,000hours φ6.3 & 8: 6,000hours φ10 to 18: 8,000hours φ5: 5,000hours φ6.3 & 8: 7,000hours φ10 to 18: 10,000hours Capacitance change ≦±30% of the initial value ≦±25% of the initial value D.F. (tanδ) ≦200% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±25% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φd Sleeve (PET : Brown) F±0.5 ●Terminal Code : E φD φd φD' F φD' L' Vent (Exceptφ5 &φ6.3) 15min. 4min. (φ5 to φ10) (φ12.5 to φ18) L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 φD+0.5max. L+1.5max. 16 0.8 7.5 18 0.8 7.5 Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 E KYB 5 6 7 8 E 9 10 11 12 13 14 M 15 16 17 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6.8µF:6R8, 39µF:390, 470µF:471) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ KYBSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ 180 390 820 1,200 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 6.3 6,800 6,800 8,200 8,200 10,000 10,000 12,000 12,000 15,000 15,000 18,000 18,000 22,000 120 330 560 820 1,000 1,000 1,200 1,800 2,200 2,700 2,700 3,900 10 4,700 4,700 5,600 6,800 6,800 6,800 8,200 8,200 10,000 10,000 12,000 12,000 15,000 120 270 470 680 680 820 1,000 16 1,500 1,800 2,200 2,200 3,300 3,900 3,900 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 18×20 12.5×40 16×25 16×31.5 18×25 16×35.5 18×31.5 16×40 18×35.5 18×40 5×11 6.3×11 8×11.5 8×15 8×20 10×12.5 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 12.5×40 16×25 18×20 16×31.5 18×25 16×35.5 18×31.5 16×40 18×35.5 18×40 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.29 0.15 0.087 0.069 0.064 0.060 0.049 0.037 0.031 0.027 0.027 0.024 0.021 0.025 0.018 0.021 0.017 0.020 0.016 0.017 0.014 0.014 0.013 0.012 0.011 0.29 0.15 0.087 0.069 0.060 0.064 0.049 0.037 0.031 0.027 0.027 0.024 0.021 0.025 0.018 0.017 0.020 0.021 0.016 0.017 0.014 0.014 0.013 0.012 0.011 0.29 0.15 0.087 0.069 0.064 0.060 0.049 0.037 0.031 0.027 0.027 0.024 0.021 0.025 1.2 0.60 0.35 0.28 0.26 0.24 0.20 0.15 0.13 0.11 0.11 0.096 0.084 0.10 0.072 0.084 0.068 0.080 0.064 0.068 0.056 0.056 0.052 0.048 0.044 1.2 0.60 0.35 0.28 0.24 0.26 0.20 0.15 0.13 0.11 0.11 0.096 0.084 0.10 0.072 0.068 0.080 0.084 0.064 0.068 0.056 0.056 0.052 0.048 0.044 1.2 0.60 0.35 0.28 0.26 0.24 0.20 0.15 0.13 0.11 0.11 0.096 0.084 0.10 340 540 840 1,050 1,050 1,210 1,400 1,650 1,910 2,230 2,230 2,530 2,860 2,610 3,140 3,000 3,640 3,140 3,610 3,530 4,080 4,220 4,220 4,280 4,700 340 540 840 1,050 1,210 1,050 1,400 1,650 1,910 2,230 2,230 2,530 2,860 2,610 3,140 3,640 3,140 3,000 3,610 3,530 4,080 4,220 4,220 4,280 4,700 340 540 840 1,050 1,050 1,210 1,400 1,650 1,910 2,230 2,230 2,530 2,860 2,610 Part No. WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ EKYB6R3E□□181ME11D EKYB6R3E□□391MF11D EKYB6R3E□□821MHB5D EKYB6R3E□□122MH15D EKYB6R3E□□122MJC5S EKYB6R3E□□152MH20D EKYB6R3E□□182MJ16S EKYB6R3E□□222MJ20S EKYB6R3E□□272MJ25S EKYB6R3E□□332MJ30S EKYB6R3E□□392MK20S EKYB6R3E□□472MK25S EKYB6R3E□□682MK30S EKYB6R3E□□682ML20S EKYB6R3E□□822MK35S EKYB6R3E□□822MM20S EKYB6R3E□□103MK40S EKYB6R3E□□103ML25S EKYB6R3E□□123MLN3S EKYB6R3E□□123MM25S EKYB6R3E□□153MLP1S EKYB6R3E□□153MMN3S EKYB6R3E□□183ML40S EKYB6R3E□□183MMP1S EKYB6R3E□□223MM40S EKYB100E□□121ME11D EKYB100E□□331MF11D EKYB100E□□561MHB5D EKYB100E□□821MH15D EKYB100E□□102MH20D EKYB100E□□102MJC5S EKYB100E□□122MJ16S EKYB100E□□182MJ20S EKYB100E□□222MJ25S EKYB100E□□272MJ30S EKYB100E□□272MK20S EKYB100E□□392MK25S EKYB100E□□472MK30S EKYB100E□□472ML20S EKYB100E□□562MK35S EKYB100E□□682MK40S EKYB100E□□682ML25S EKYB100E□□682MM20S EKYB100E□□822MLN3S EKYB100E□□822MM25S EKYB100E□□103MLP1S EKYB100E□□103MMN3S EKYB100E□□123ML40S EKYB100E□□123MMP1S EKYB100E□□153MM40S EKYB160E□□121ME11D EKYB160E□□271MF11D EKYB160E□□471MHB5D EKYB160E□□681MH15D EKYB160E□□681MJC5S EKYB160E□□821MH20D EKYB160E□□102MJ16S EKYB160E□□152MJ20S EKYB160E□□182MJ25S EKYB160E□□222MJ30S EKYB160E□□222MK20S EKYB160E□□332MK25S EKYB160E□□392MK30S EKYB160E□□392ML20S 16 25 35 50 4,700 4,700 5,600 5,600 6,800 6,800 8,200 8,200 10,000 10,000 12,000 82 150 330 390 470 560 680 1,000 1,200 1,500 1,500 2,200 2,700 2,700 3,300 3,300 3,900 3,900 4,700 4,700 5,600 6,800 6,800 8,200 47 100 180 270 330 330 470 680 820 1,000 1,000 1,500 1,800 1,800 2,200 2,200 2,700 2,700 3,300 3,300 3,900 4,700 4,700 5,600 27 56 100 150 150 12.5×35 18×20 12.5×40 16×25 16×31.5 18×25 16×35.5 18×31.5 16×40 18×35.5 18×40 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 18×20 12.5×40 16×25 16×31.5 18×25 16×35.5 16×40 18×31.5 18×35.5 5×11 6.3×11 8×11.5 8×15 8×20 10×12.5 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 18×20 12.5×40 16×25 16×31.5 18×25 16×35.5 16×40 18×31.5 18×35.5 5×11 6.3×11 8×11.5 8×15 10×12.5 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.018 0.021 0.017 0.020 0.016 0.017 0.014 0.014 0.013 0.012 0.011 0.29 0.15 0.087 0.069 0.064 0.060 0.049 0.037 0.031 0.027 0.027 0.024 0.021 0.025 0.018 0.021 0.017 0.020 0.016 0.017 0.014 0.013 0.014 0.012 0.29 0.15 0.087 0.069 0.060 0.064 0.049 0.037 0.031 0.027 0.027 0.024 0.021 0.025 0.018 0.021 0.017 0.020 0.016 0.017 0.014 0.013 0.014 0.012 0.48 0.20 0.12 0.093 0.10 0.072 0.084 0.068 0.080 0.064 0.068 0.056 0.056 0.052 0.048 0.044 1.2 0.60 0.35 0.28 0.26 0.24 0.20 0.15 0.13 0.11 0.11 0.096 0.084 0.10 0.072 0.084 0.068 0.080 0.064 0.068 0.056 0.052 0.056 0.048 1.2 0.60 0.35 0.28 0.24 0.26 0.20 0.15 0.13 0.11 0.11 0.096 0.084 0.10 0.072 0.084 0.068 0.080 0.064 0.068 0.056 0.052 0.056 0.048 2.0 0.80 0.48 0.38 0.40 3,140 3,000 3,640 3,140 3,610 3,530 4,080 4,220 4,220 4,280 4,700 340 540 840 1,050 1,050 1,210 1,400 1,650 1,910 2,230 2,230 2,530 2,860 2,610 3,140 3,000 3,640 3,140 3,610 3,530 4,080 4,220 4,220 4,280 340 540 840 1,050 1,210 1,050 1,400 1,650 1,910 2,230 2,230 2,530 2,860 2,610 3,140 3,000 3,640 3,140 3,610 3,530 4,080 4,220 4,220 4,280 238 385 620 810 810 Part No. EKYB160E□□472MK35S EKYB160E□□472MM20S EKYB160E□□562MK40S EKYB160E□□562ML25S EKYB160E□□682MLN3S EKYB160E□□682MM25S EKYB160E□□822MLP1S EKYB160E□□822MMN3S EKYB160E□□103ML40S EKYB160E□□103MMP1S EKYB160E□□123MM40S EKYB250E□□820ME11D EKYB250E□□151MF11D EKYB250E□□331MHB5D EKYB250E□□391MH15D EKYB250E□□471MJC5S EKYB250E□□561MH20D EKYB250E□□681MJ16S EKYB250E□□102MJ20S EKYB250E□□122MJ25S EKYB250E□□152MJ30S EKYB250E□□152MK20S EKYB250E□□222MK25S EKYB250E□□272MK30S EKYB250E□□272ML20S EKYB250E□□332MK35S EKYB250E□□332MM20S EKYB250E□□392MK40S EKYB250E□□392ML25S EKYB250E□□472MLN3S EKYB250E□□472MM25S EKYB250E□□562MLP1S EKYB250E□□682ML40S EKYB250E□□682MMN3S EKYB250E□□822MMP1S EKYB350E□□470ME11D EKYB350E□□101MF11D EKYB350E□□181MHB5D EKYB350E□□271MH15D EKYB350E□□331MH20D EKYB350E□□331MJC5S EKYB350E□□471MJ16S EKYB350E□□681MJ20S EKYB350E□□821MJ25S EKYB350E□□102MJ30S EKYB350E□□102MK20S EKYB350E□□152MK25S EKYB350E□□182MK30S EKYB350E□□182ML20S EKYB350E□□222MK35S EKYB350E□□222MM20S EKYB350E□□272MK40S EKYB350E□□272ML25S EKYB350E□□332MLN3S EKYB350E□□332MM25S EKYB350E□□392MLP1S EKYB350E□□472ML40S EKYB350E□□472MMN3S EKYB350E□□562MMP1S EKYB500E□□270ME11D EKYB500E□□560MF11D EKYB500E□□101MHB5D EKYB500E□□151MH15D EKYB500E□□151MJC5S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ KYBSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ 50 63 80 180 220 270 390 470 470 680 820 820 1,000 1,000 1,200 1,200 1,500 1,500 1,800 2,200 2,200 2,700 18 33 56 82 120 120 180 220 330 390 390 560 680 680 820 820 1,000 1,000 1,200 1,200 1,500 1,500 1,800 1,800 2,200 12 22 39 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 18×20 12.5×40 16×25 16×31.5 18×25 16×35.5 16×40 18×31.5 18×35.5 5×11 6.3×11 8×11.5 8×15 8×20 10×12.5 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 18×20 12.5×40 16×25 16×31.5 18×25 16×35.5 18×31.5 16×40 18×35.5 18×40 5×11 6.3×11 8×11.5 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.075 0.069 0.055 0.043 0.038 0.034 0.030 0.025 0.028 0.021 0.025 0.019 0.024 0.019 0.021 0.016 0.014 0.014 0.013 0.50 0.25 0.16 0.12 0.085 0.11 0.073 0.055 0.045 0.040 0.036 0.030 0.026 0.028 0.022 0.028 0.020 0.025 0.020 0.022 0.018 0.018 0.016 0.017 0.016 0.80 0.43 0.18 0.30 0.28 0.22 0.18 0.16 0.14 0.12 0.10 0.12 0.084 0.10 0.076 0.096 0.076 0.084 0.064 0.056 0.056 0.052 2.0 1.0 0.64 0.48 0.34 0.44 0.30 0.22 0.18 0.16 0.15 0.12 0.11 0.12 0.088 0.12 0.080 0.10 0.080 0.088 0.072 0.072 0.064 0.068 0.064 3.2 1.8 0.72 980 1,100 1,300 1,600 1,820 1,820 2,100 2,450 2,350 2,800 2,600 3,100 2,750 3,150 2,890 3,550 3,900 3,800 4,100 220 350 530 700 880 725 1,050 1,300 1,550 1,780 1,780 2,100 2,415 2,250 2,700 2,500 3,000 2,730 3,000 2,800 3,200 3,300 3,590 3,570 3,670 163 267 462 Part No. WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ EKYB500E□□181MH20D EKYB500E□□221MJ16S EKYB500E□□271MJ20S EKYB500E□□391MJ25S EKYB500E□□471MJ30S EKYB500E□□471MK20S EKYB500E□□681MK25S EKYB500E□□821MK30S EKYB500E□□821ML20S EKYB500E□□102MK35S EKYB500E□□102MM20S EKYB500E□□122MK40S EKYB500E□□122ML25S EKYB500E□□152MLN3S EKYB500E□□152MM25S EKYB500E□□182MLP1S EKYB500E□□222ML40S EKYB500E□□222MMN3S EKYB500E□□272MMP1S EKYB630E□□180ME11D EKYB630E□□330MF11D EKYB630E□□560MHB5D EKYB630E□□820MH15D EKYB630E□□121MH20D EKYB630E□□121MJC5S EKYB630E□□181MJ16S EKYB630E□□221MJ20S EKYB630E□□331MJ25S EKYB630E□□391MJ30S EKYB630E□□391MK20S EKYB630E□□561MK25S EKYB630E□□681MK30S EKYB630E□□681ML20S EKYB630E□□821MK35S EKYB630E□□821MM20S EKYB630E□□102MK40S EKYB630E□□102ML25S EKYB630E□□122MLN3S EKYB630E□□122MM25S EKYB630E□□152MLP1S EKYB630E□□152MMN3S EKYB630E□□182ML40S EKYB630E□□182MMP1S EKYB630E□□222MM40S EKYB800E□□120ME11D EKYB800E□□220MF11D EKYB800E□□390MHB5D 56 82 82 120 180 220 270 270 390 470 80 470 560 560 680 680 820 820 1,000 1,200 1,200 1,500 6.8 15 27 39 56 56 82 100 120 150 180 220 100 270 270 330 390 390 470 470 560 560 680 680 820 1,000 8×15 8×20 10×12.5 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 18×20 12.5×40 16×25 16×31.5 18×25 16×35.5 16×40 18×31.5 18×35.5 5×11 6.3×11 8×11.5 8×15 8×20 10×12.5 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 16×25 12.5×35 18×20 12.5×40 16×31.5 16×35.5 18×25 16×40 18×31.5 18×35.5 18×40 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.14 0.11 0.14 0.10 0.075 0.060 0.053 0.048 0.039 0.033 0.036 0.026 0.032 0.024 0.028 0.022 0.027 0.020 0.018 0.020 0.018 0.80 0.43 0.18 0.14 0.11 0.14 0.10 0.075 0.060 0.053 0.048 0.039 0.033 0.036 0.028 0.026 0.032 0.024 0.022 0.020 0.027 0.018 0.020 0.018 0.017 0.56 0.44 0.56 0.40 0.30 0.24 0.22 0.20 0.16 0.14 0.15 0.11 0.13 0.096 0.12 0.088 0.11 0.080 0.072 0.080 0.072 3.2 1.8 0.72 0.56 0.44 0.56 0.40 0.30 0.24 0.22 0.20 0.16 0.14 0.15 0.12 0.11 0.13 0.096 0.088 0.080 0.11 0.072 0.080 0.072 0.068 585 735 624 780 1,040 1,170 1,350 1,430 1,620 1,950 1,750 2,250 2,100 2,450 2,250 2,400 2,270 2,600 2,900 2,550 3,050 163 267 462 585 735 624 780 1,040 1,170 1,350 1,430 1,620 1,950 1,750 2,250 2,250 2,100 2,450 2,400 2,600 2,270 2,900 2,550 3,050 3,510 Part No. EKYB800E□□560MH15D EKYB800E□□820MH20D EKYB800E□□820MJC5S EKYB800E□□121MJ16S EKYB800E□□181MJ20S EKYB800E□□221MJ25S EKYB800E□□271MJ30S EKYB800E□□271MK20S EKYB800E□□391MK25S EKYB800E□□471MK30S EKYB800E□□471ML20S EKYB800E□□561MK35S EKYB800E□□561MM20S EKYB800E□□681MK40S EKYB800E□□681ML25S EKYB800E□□821MLN3S EKYB800E□□821MM25S EKYB800E□□102MLP1S EKYB800E□□122ML40S EKYB800E□□122MMN3S EKYB800E□□152MMP1S EKYB101E□□6R8ME11D EKYB101E□□150MF11D EKYB101E□□270MHB5D EKYB101E□□390MH15D EKYB101E□□560MH20D EKYB101E□□560MJC5S EKYB101E□□820MJ16S EKYB101E□□101MJ20S EKYB101E□□121MJ25S EKYB101E□□151MJ30S EKYB101E□□181MK20S EKYB101E□□221MK25S EKYB101E□□271MK30S EKYB101E□□271ML20S EKYB101E□□331ML25S EKYB101E□□391MK35S EKYB101E□□391MM20S EKYB101E□□471MK40S EKYB101E□□471MLN3S EKYB101E□□561MLP1S EKYB101E□□561MM25S EKYB101E□□681ML40S EKYB101E□□681MMN3S EKYB101E□□821MMP1S EKYB101E□□102MM40S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 6.8 to 180 220 to 560 680 to 1,800 2,200 to 3,900 4,700 to 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KYA Series Low impedance, 105℃ KYA ・Downsized from KY series ・Newly innovative electrolyte is employed to minimize impedance ・Endurance with ripple current : 4,000 to 10,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant Downsized KY ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 6.3 to 100Vdc (at 20℃, 120Hz) ±20% (M) I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V tanδ (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 100V Z(-25℃)/Z(+20℃) 4 3 2 2 2 2 2 2 8 6 4 3 3 3 3 3 (at 120Hz) Z(-40℃)/Z(+20℃) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃. Time 6.3 to 10Vdc φ5 & 6.3 : 4,000hours φ8 & 10 : 6,000hours φ12.5 to 16 : 8,000hours 16 to 100Vdc φ5 & 6.3 : 5,000hours φ8 & 10 : 7,000hours φ12.5 to 16 : 10,000hours Capacitance change ≦±25% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±25% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φd Sleeve (PET : Brown) F±0.5 ●Terminal Code : E φD φd φD' F φD' L' Vent (Exceptφ5 &φ6.3) 15min. 4min. (φ5 to φ10) (φ12.5 to φ16) L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 φD+0.5max. L+1.5max. 16 0.8 7.5 Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 E KYA 5 6 7 8 E 9 10 11 12 13 14 M 15 16 17 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0µF:1R0,10µF:100,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3,50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ KYASeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ 6.3 10 16 25 100 180 220 330 470 820 1,200 1,200 1,500 1,800 2,700 3,300 3,900 4,700 5,600 10,000 12,000 15,000 100 120 330 560 820 820 1,000 1,200 1,200 1,800 2,200 3,300 3,900 6,800 10,000 12,000 47 100 220 270 470 680 680 820 1,000 1,500 1,800 2,200 3,300 4,700 5,600 6,800 8,200 10,000 33 47 68 150 330 390 470 560 680 1,000 1,200 1,500 2,200 5×11 5×11 5×11 6.3×11 6.3×11 8×11.5 10×12.5 8×15 8×20 10×16 10×20 10×25 12.5×20 12.5×25 12.5×25 16×25 16×31.5 16×35.5 5×11 5×11 6.3×11 8×11.5 8×15 10×12.5 10×12.5 8×20 10×16 10×20 10×25 12.5×20 12.5×25 16×25 16×31.5 16×35.5 5×11 5×11 6.3×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 12.5×20 12.5×25 16×25 16×25 16×31.5 16×31.5 16×35.5 5×11 5×11 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 12.5×20 12.5×25 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.90 0.40 0.40 0.22 0.22 0.13 0.080 0.087 0.069 0.060 0.046 0.042 0.035 0.027 0.027 0.021 0.017 0.015 0.90 0.40 0.22 0.13 0.087 0.080 0.080 0.069 0.060 0.046 0.042 0.035 0.027 0.021 0.017 0.015 0.40 0.40 0.22 0.22 0.13 0.087 0.080 0.069 0.060 0.046 0.042 0.035 0.027 0.021 0.021 0.017 0.017 0.015 0.40 0.40 0.40 0.22 0.13 0.087 0.080 0.069 0.060 0.046 0.042 0.035 0.027 3.6 1.6 1.6 0.87 0.87 0.52 0.32 0.35 0.27 0.24 0.18 0.17 0.12 0.089 0.089 0.060 0.050 0.044 3.6 1.6 0.87 0.52 0.35 0.32 0.32 0.27 0.24 0.18 0.17 0.12 0.089 0.060 0.050 0.044 1.6 1.6 0.87 0.87 0.52 0.35 0.32 0.27 0.24 0.18 0.17 0.12 0.089 0.060 0.060 0.050 0.050 0.044 1.6 1.6 1.6 0.87 0.52 0.35 0.32 0.27 0.24 0.18 0.17 0.12 0.089 150 250 250 400 400 640 865 840 1,050 1,300 1,400 1,650 1,900 2,230 2,230 2,930 3,450 3,610 150 250 400 640 840 865 865 1,050 1,300 1,400 1,650 1,900 2,230 2,930 3,450 3,610 250 250 400 400 640 840 865 1,050 1,300 1,400 1,650 1,900 2,230 2,930 2,930 3,450 3,450 3,610 250 250 250 400 640 840 865 1,050 1,300 1,400 1,650 1,900 2,230 Part No. WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ EKYA6R3E□□101ME11D 3,300 EKYA6R3E□□181ME11D 3,900 25 EKYA6R3E□□221ME11D 4,700 EKYA6R3E□□331MF11D 5,600 EKYA6R3E□□471MF11D 33 EKYA6R3E□□821MHB5D 47 EKYA6R3E□□122MJC5S 100 EKYA6R3E□□122MH15D 220 EKYA6R3E□□152MH20D 270 EKYA6R3E□□182MJ16S 330 EKYA6R3E□□272MJ20S 390 EKYA6R3E□□332MJ25S 470 35 EKYA6R3E□□392MK20S 680 EKYA6R3E□□472MK25S 820 EKYA6R3E□□562MK25S 1,000 EKYA6R3E□□103ML25S 1,500 EKYA6R3E□□123MLN3S 2,200 EKYA6R3E□□153MLP1S 2,700 EKYA100E□□101ME11D 3,300 EKYA100E□□121ME11D 3,900 EKYA100E□□331MF11D 1.0 EKYA100E□□561MHB5D 2.2 EKYA100E□□821MH15D 3.3 EKYA100E□□821MJC5S 4.7 EKYA100E□□102MJC5S 10 EKYA100E□□122MH20D 22 EKYA100E□□122MJ16S 27 EKYA100E□□182MJ20S 47 EKYA100E□□222MJ25S 56 EKYA100E□□332MK20S 100 EKYA100E□□392MK25S 150 EKYA100E□□682ML25S 50 180 EKYA100E□□103MLN3S 180 EKYA100E□□123MLP1S 220 EKYA160E□□470ME11D 330 EKYA160E□□101ME11D 470 EKYA160E□□221MF11D 470 EKYA160E□□271MF11D 560 EKYA160E□□471MHB5D 820 EKYA160E□□681MH15D 1,000 EKYA160E□□681MJC5S 1,200 EKYA160E□□821MH20D 1,800 EKYA160E□□102MJ16S 2,200 EKYA160E□□152MJ20S 10 EKYA160E□□182MJ25S 15 EKYA160E□□222MK20S 33 EKYA160E□□332MK25S 56 EKYA160E□□472ML25S 82 EKYA160E□□562ML25S 100 EKYA160E□□682MLN3S 120 EKYA160E□□822MLN3S 120 EKYA160E□□103MLP1S 63 220 EKYA250E□□330ME11D 330 EKYA250E□□470ME11D 330 EKYA250E□□680ME11D 390 EKYA250E□□151MF11D 470 EKYA250E□□331MHB5D 560 EKYA250E□□391MH15D 1,000 EKYA250E□□471MJC5S 1,200 EKYA250E□□561MH20D 1,500 EKYA250E□□681MJ16S 1.0 EKYA250E□□102MJ20S 2.2 EKYA250E□□122MJ25S 100 3.3 EKYA250E□□152MK20S 4.7 EKYA250E□□222MK25S 6.8 16×25 16×25 16×31.5 16×35.5 5×11 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 12.5×20 12.5×25 16×25 16×25 16×31.5 16×35.5 5×11 5×11 5×11 5×11 5×11 5×11 5×11 6.3×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 12.5×20 12.5×20 12.5×25 16×25 16×25 16×31.5 16×35.5 5×11 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 12.5×20 12.5×20 12.5×25 12.5×25 16×25 16×31.5 16×35.5 5×11 5×11 5×11 5×11 5×11 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.021 0.021 0.017 0.015 0.40 0.40 0.22 0.13 0.087 0.080 0.069 0.060 0.046 0.042 0.035 0.027 0.021 0.021 0.017 0.015 4.0 2.5 2.2 1.9 1.5 0.70 0.70 0.30 0.30 0.17 0.12 0.12 0.091 0.084 0.060 0.055 0.045 0.045 0.034 0.025 0.025 0.022 0.019 0.88 0.88 0.35 0.22 0.16 0.11 0.12 0.076 0.056 0.046 0.041 0.041 0.031 0.031 0.025 0.021 0.019 4.5 3.0 2.7 2.5 1.4 0.060 0.060 0.050 0.044 1.6 1.6 0.87 0.52 0.35 0.32 0.27 0.24 0.18 0.17 0.12 0.089 0.060 0.060 0.050 0.044 16 10 8.8 7.6 6.0 2.8 2.8 1.2 1.2 0.68 0.48 0.48 0.36 0.34 0.24 0.22 0.15 0.15 0.11 0.075 0.075 0.066 0.057 3.5 3.5 1.4 0.88 0.64 0.44 0.48 0.31 0.23 0.19 0.13 0.13 0.093 0.093 0.075 0.063 0.057 15 13 11 10 5.6 2,930 2,930 3,450 3,610 250 250 400 640 840 865 1,050 1,300 1,400 1,650 1,900 2,230 2,930 2,930 3,450 3,610 30 43 53 88 100 180 250 295 295 555 730 760 910 1,050 1,220 1,440 1,660 1,660 1,950 2,555 2,555 3,010 3,150 173 173 278 500 665 725 820 950 1,200 1,350 1,570 1,570 1,990 1,990 2,730 2,850 2,900 20 30 40 65 125 Part No. EKYA250E□□332ML25S EKYA250E□□392ML25S EKYA250E□□472MLN3S EKYA250E□□562MLP1S EKYA350E□□330ME11D EKYA350E□□470ME11D EKYA350E□□101MF11D EKYA350E□□221MHB5D EKYA350E□□271MH15D EKYA350E□□331MJC5S EKYA350E□□391MH20D EKYA350E□□471MJ16S EKYA350E□□681MJ20S EKYA350E□□821MJ25S EKYA350E□□102MK20S EKYA350E□□152MK25S EKYA350E□□222ML25S EKYA350E□□272ML25S EKYA350E□□332MLN3S EKYA350E□□392MLP1S EKYA500E□□1R0ME11D EKYA500E□□2R2ME11D EKYA500E□□3R3ME11D EKYA500E□□4R7ME11D EKYA500E□□100ME11D EKYA500E□□220ME11D EKYA500E□□270ME11D EKYA500E□□470MF11D EKYA500E□□560MF11D EKYA500E□□101MHB5D EKYA500E□□151MH15D EKYA500E□□181MJC5S EKYA500E□□181MH20D EKYA500E□□221MJ16S EKYA500E□□331MJ20S EKYA500E□□471MJ25S EKYA500E□□471MK20S EKYA500E□□561MK20S EKYA500E□□821MK25S EKYA500E□□102ML25S EKYA500E□□122ML25S EKYA500E□□182MLN3S EKYA500E□□222MLP1S EKYA630E□□100ME11D EKYA630E□□150ME11D EKYA630E□□330MF11D EKYA630E□□560MHB5D EKYA630E□□820MH15D EKYA630E□□101MJC5S EKYA630E□□121MH20D EKYA630E□□121MJ16S EKYA630E□□221MJ20S EKYA630E□□331MJ25S EKYA630E□□331MK20S EKYA630E□□391MK20S EKYA630E□□471MK25S EKYA630E□□561MK25S EKYA630E□□102ML25S EKYA630E□□122MLN3S EKYA630E□□152MLP1S EKYA101E□□1R0ME11D EKYA101E□□2R2ME11D EKYA101E□□3R3ME11D EKYA101E□□4R7ME11D EKYA101E□□6R8ME11D □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ KYASeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ 100 10 6.3×11 15 6.3×11 27 8×11.5 39 8×15 47 10×12.5 56 8×20 68 10×16 100 10×20 150 10×25 180 12.5×20 220 12.5×25 330 16×25 470 16×31.5 560 16×35.5 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.57 0.57 0.36 0.25 0.17 0.19 0.11 0.084 0.069 0.062 0.047 0.038 0.032 0.029 2.3 2.3 1.4 1.0 0.66 0.76 0.47 0.34 0.28 0.18 0.14 0.12 0.095 0.086 205 205 355 450 480 565 600 800 900 1,100 1,250 1,700 1,850 2,000 Part No. EKYA101E□□100MF11D EKYA101E□□150MF11D EKYA101E□□270MHB5D EKYA101E□□390MH15D EKYA101E□□470MJC5S EKYA101E□□560MH20D EKYA101E□□680MJ16S EKYA101E□□101MJ20S EKYA101E□□151MJ25S EKYA101E□□181MK20S EKYA101E□□221MK25S EKYA101E□□331ML25S EKYA101E□□471MLN3S EKYA101E□□561MLP1S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 1.0 to 180 220 to 560 680 to 1,800 2,200 to 3,900 4,700 to 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KY Low impedance, 105℃ KZH Series Lower Z KZE ・Newly innovative electrolyte is employed to minimize ESR ・Endurance with ripple current : 4,000 to 10,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant Lower Z KY ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 6.3 to 100Vdc (at 20℃, 120Hz) ±20% (M) I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V tanδ (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V Z(-25℃)/Z(+20℃) 4 3 2 2 2 2 2 2 2 Z(-40℃)/Z(+20℃) 8 6 4 3 3 3 3 3 3 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃. 6.3 to 10Vdc φ5 & 6.3 : 4,000hours φ8 & 10 : 6,000hours φ12.5 to 18 : 8,000hours Time 16 to 100Vdc φ5 & 6.3 : 5,000hours φ8 & 10 : 7,000hours φ12.5 to 18 : 10,000hours Capacitance change ≦±25% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±25% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φd Sleeve (PET : Brown) F±0.5 ●Terminal Code : E φD φd φD' F φD' L' Vent (Exceptφ5 &φ6.3) 15min. 4min. (φ5 to φ10) (φ12.5 to φ18) L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 φD+0.5max. L+1.5max. 16 0.8 7.5 18 0.8 7.5 Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 E KY- 5 6 7 8 E 9 10 11 12 13 14 M 15 16 17 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1.0µF:1R0,10µF:100,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3,50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ KYSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ 150 330 680 820 1,000 1,200 1,200 1,500 1,800 2,200 2,700 2,700 3,300 3,900 6.3 3,900 4,700 5,600 5,600 6,800 6,800 6,800 8,200 10,000 10,000 12,000 12,000 15,000 18,000 100 220 470 680 680 1,000 1,000 1,200 1,500 1,500 2,200 2,200 2,200 2,700 10 3,300 3,900 3,900 4,700 5,600 5,600 5,600 6,800 6,800 8,200 8,200 10,000 10,000 12,000 56 120 330 470 470 16 680 680 1,000 1,000 1,200 1,500 5×11 6.3×11 8×11.5 10×12.5 8×15 8×20 10×16 10×20 12.5×15 10×25 10×30 16×15 12.5×20 12.5×25 18×15 12.5×30 12.5×35 16×20 12.5×40 16×25 18×20 16×31.5 16×35.5 18×25 16×40 18×31.5 18×35.5 18×40 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 10×25 12.5×15 10×30 12.5×20 16×15 18×15 12.5×25 12.5×30 16×20 12.5×35 12.5×40 16×25 18×20 16×31.5 18×25 16×35.5 18×31.5 16×40 18×35.5 18×40 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 12.5×15 10×25 10×30 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.58 0.22 0.13 0.080 0.087 0.069 0.060 0.046 0.049 0.042 0.031 0.042 0.035 0.027 0.043 0.024 0.020 0.027 0.017 0.021 0.026 0.017 0.015 0.019 0.013 0.015 0.014 0.012 0.58 0.22 0.13 0.087 0.080 0.069 0.060 0.046 0.042 0.049 0.031 0.035 0.042 0.043 0.027 0.024 0.027 0.020 0.017 0.021 0.026 0.017 0.019 0.015 0.015 0.013 0.014 0.012 0.58 0.22 0.13 0.087 0.080 0.069 0.060 0.046 0.049 0.042 0.031 2.3 0.87 0.52 0.32 0.35 0.27 0.24 0.18 0.16 0.17 0.12 0.12 0.12 0.089 0.11 0.078 0.065 0.078 0.056 0.060 0.067 0.050 0.044 0.049 0.038 0.040 0.038 0.032 2.3 0.87 0.52 0.35 0.32 0.27 0.24 0.18 0.17 0.16 0.12 0.12 0.12 0.11 0.089 0.078 0.078 0.065 0.056 0.060 0.067 0.050 0.049 0.044 0.040 0.038 0.038 0.032 2.3 0.87 0.52 0.35 0.32 0.27 0.24 0.18 0.16 0.17 0.12 210 340 640 865 840 1,050 1,210 1,400 1,450 1,650 1,910 1,940 1,900 2,230 2,210 2,650 2,880 2,530 3,350 2,930 2,860 3,450 3,610 3,140 4,080 4,170 4,220 4,280 210 340 640 840 865 1,050 1,210 1,400 1,650 1,450 1,910 1,900 1,940 2,210 2,230 2,650 2,530 2,880 3,350 2,930 2,860 3,450 3,140 3,610 4,170 4,080 4,220 4,280 210 340 640 840 865 1,050 1,210 1,400 1,450 1,650 1,910 Part No. WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ EKY-6R3E□□151ME11D EKY-6R3E□□331MF11D EKY-6R3E□□681MHB5D EKY-6R3E□□821MJC5S EKY-6R3E□□102MH15D EKY-6R3E□□122MH20D EKY-6R3E□□122MJ16S EKY-6R3E□□152MJ20S EKY-6R3E□□182MK15S EKY-6R3E□□222MJ25S EKY-6R3E□□272MJ30S EKY-6R3E□□272ML15S EKY-6R3E□□332MK20S EKY-6R3E□□392MK25S EKY-6R3E□□392MM15S EKY-6R3E□□472MK30S EKY-6R3E□□562MK35S EKY-6R3E□□562ML20S EKY-6R3E□□682MK40S EKY-6R3E□□682ML25S EKY-6R3E□□682MM20S EKY-6R3E□□822MLN3S EKY-6R3E□□103MLP1S EKY-6R3E□□103MM25S EKY-6R3E□□123ML40S EKY-6R3E□□123MMN3S EKY-6R3E□□153MMP1S EKY-6R3E□□183MM40S EKY-100E□□101ME11D EKY-100E□□221MF11D EKY-100E□□471MHB5D EKY-100E□□681MH15D EKY-100E□□681MJC5S EKY-100E□□102MH20D EKY-100E□□102MJ16S EKY-100E□□122MJ20S EKY-100E□□152MJ25S EKY-100E□□152MK15S EKY-100E□□222MJ30S EKY-100E□□222MK20S EKY-100E□□222ML15S EKY-100E□□272MM15S EKY-100E□□332MK25S EKY-100E□□392MK30S EKY-100E□□392ML20S EKY-100E□□472MK35S EKY-100E□□562MK40S EKY-100E□□562ML25S EKY-100E□□562MM20S EKY-100E□□682MLN3S EKY-100E□□682MM25S EKY-100E□□822MLP1S EKY-100E□□822MMN3S EKY-100E□□103ML40S EKY-100E□□103MMP1S EKY-100E□□123MM40S EKY-160E□□560ME11D EKY-160E□□121MF11D EKY-160E□□331MHB5D EKY-160E□□471MH15D EKY-160E□□471MJC5S EKY-160E□□681MH20D EKY-160E□□681MJ16S EKY-160E□□102MJ20S EKY-160E□□102MK15S EKY-160E□□122MJ25S EKY-160E□□152MJ30S 1,500 1,500 2,200 2,200 2,700 2,700 3,300 3,900 16 3,900 3,900 4,700 4,700 5,600 5,600 6,800 8,200 10,000 47 100 220 330 330 470 470 680 680 820 1,000 1,000 1,000 1,200 25 1,500 1,800 1,800 2,200 2,200 2,700 2,700 3,300 3,300 3,900 3,900 4,700 4,700 5,600 33 56 150 220 220 270 330 470 470 560 680 35 680 680 1,000 1,000 1,200 1,200 1,500 1,800 1,800 1,800 2,200 12.5×20 16×15 12.5×25 18×15 12.5×30 16×20 12.5×35 12.5×40 16×25 18×20 16×31.5 18×25 16×35.5 18×31.5 16×40 18×35.5 18×40 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 12.5×15 10×25 10×30 12.5×20 16×15 18×15 12.5×25 12.5×30 16×20 12.5×35 18×20 12.5×40 16×25 16×31.5 18×25 16×35.5 18×31.5 16×40 18×35.5 18×40 5×11 6.3×11 8×11.5 8×15 10×12.5 8×20 10×16 10×20 12.5×15 10×25 10×30 12.5×20 16×15 12.5×25 18×15 12.5×30 16×20 12.5×35 12.5×40 16×25 18×20 16×31.5 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.035 0.042 0.027 0.043 0.024 0.027 0.020 0.017 0.021 0.026 0.017 0.019 0.015 0.015 0.013 0.014 0.012 0.58 0.22 0.13 0.087 0.080 0.069 0.060 0.046 0.049 0.042 0.031 0.035 0.042 0.043 0.027 0.024 0.027 0.020 0.026 0.017 0.021 0.017 0.019 0.015 0.015 0.013 0.014 0.012 0.58 0.22 0.13 0.087 0.080 0.069 0.060 0.046 0.049 0.042 0.031 0.035 0.042 0.027 0.043 0.024 0.027 0.020 0.017 0.021 0.026 0.017 0.12 0.12 0.089 0.11 0.078 0.078 0.065 0.056 0.060 0.067 0.050 0.049 0.044 0.040 0.038 0.038 0.032 2.3 0.87 0.52 0.35 0.32 0.27 0.24 0.18 0.16 0.17 0.12 0.12 0.12 0.11 0.089 0.078 0.078 0.065 0.067 0.056 0.060 0.050 0.049 0.044 0.040 0.038 0.038 0.032 2.3 0.87 0.52 0.35 0.32 0.27 0.24 0.18 0.16 0.17 0.12 0.12 0.12 0.089 0.11 0.078 0.078 0.065 0.056 0.060 0.067 0.050 1,900 1,940 2,230 2,210 2,650 2,530 2,880 3,350 2,930 2,860 3,450 3,140 3,610 4,170 4,080 4,220 4,280 210 340 640 840 865 1,050 1,210 1,400 1,450 1,650 1,910 1,900 1,940 2,210 2,230 2,650 2,530 2,880 2,860 3,350 2,930 3,450 3,140 3,610 4,170 4,080 4,220 4,280 210 340 640 840 865 1,050 1,210 1,400 1,450 1,650 1,910 1,900 1,940 2,230 2,210 2,650 2,530 2,880 3,350 2,930 2,860 3,450 Part No. EKY-160E□□152MK20S EKY-160E□□152ML15S EKY-160E□□222MK25S EKY-160E□□222MM15S EKY-160E□□272MK30S EKY-160E□□272ML20S EKY-160E□□332MK35S EKY-160E□□392MK40S EKY-160E□□392ML25S EKY-160E□□392MM20S EKY-160E□□472MLN3S EKY-160E□□472MM25S EKY-160E□□562MLP1S EKY-160E□□562MMN3S EKY-160E□□682ML40S EKY-160E□□822MMP1S EKY-160E□□103MM40S EKY-250E□□470ME11D EKY-250E□□101MF11D EKY-250E□□221MHB5D EKY-250E□□331MH15D EKY-250E□□331MJC5S EKY-250E□□471MH20D EKY-250E□□471MJ16S EKY-250E□□681MJ20S EKY-250E□□681MK15S EKY-250E□□821MJ25S EKY-250E□□102MJ30S EKY-250E□□102MK20S EKY-250E□□102ML15S EKY-250E□□122MM15S EKY-250E□□152MK25S EKY-250E□□182MK30S EKY-250E□□182ML20S EKY-250E□□222MK35S EKY-250E□□222MM20S EKY-250E□□272MK40S EKY-250E□□272ML25S EKY-250E□□332MLN3S EKY-250E□□332MM25S EKY-250E□□392MLP1S EKY-250E□□392MMN3S EKY-250E□□472ML40S EKY-250E□□472MMP1S EKY-250E□□562MM40S EKY-350E□□330ME11D EKY-350E□□560MF11D EKY-350E□□151MHB5D EKY-350E□□221MH15D EKY-350E□□221MJC5S EKY-350E□□271MH20D EKY-350E□□331MJ16S EKY-350E□□471MJ20S EKY-350E□□471MK15S EKY-350E□□561MJ25S EKY-350E□□681MJ30S EKY-350E□□681MK20S EKY-350E□□681ML15S EKY-350E□□102MK25S EKY-350E□□102MM15S EKY-350E□□122MK30S EKY-350E□□122ML20S EKY-350E□□152MK35S EKY-350E□□182MK40S EKY-350E□□182ML25S EKY-350E□□182MM20S EKY-350E□□222MLN3S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ KYSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ 2,200 18×25 2,700 16×35.5 2,700 18×31.5 35 3,300 16×40 3,300 18×35.5 3,900 18×40 1.0 5×11 2.2 5×11 3.3 5×11 4.7 5×11 10 5×11 22 5×11 56 6.3×11 100 8×11.5 120 8×15 150 10×12.5 180 8×20 220 10×16 270 10×20 270 12.5×15 330 10×25 470 10×30 50 470 12.5×20 470 16×15 560 12.5×25 560 18×15 680 12.5×30 820 12.5×35 820 16×20 1,000 12.5×40 1,000 16×25 1,000 18×20 1,200 16×31.5 1,200 18×25 1,500 16×35.5 1,800 16×40 1,800 18×31.5 2,200 18×35.5 2,700 18×40 15 5×11 33 6.3×11 56 8×11.5 82 8×15 82 10×12.5 120 8×20 120 10×16 180 10×20 63 180 12.5×16 220 10×25 270 12.5×20 390 12.5×25 470 12.5×30 470 16×20 560 12.5×35 680 12.5×40 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.019 0.049 0.015 0.044 0.015 0.040 0.013 0.038 0.014 0.038 0.012 0.032 4.0 16.0 2.5 10.0 2.2 8.8 1.9 7.6 1.5 6.0 0.70 2.8 0.30 1.2 0.17 0.68 0.12 0.48 0.12 0.48 0.091 0.36 0.084 0.34 0.060 0.24 0.061 0.20 0.055 0.22 0.043 0.17 0.045 0.15 0.055 0.17 0.034 0.11 0.054 0.15 0.030 0.10 0.025 0.083 0.034 0.10 0.021 0.069 0.025 0.075 0.036 0.097 0.022 0.066 0.026 0.070 0.019 0.057 0.016 0.048 0.021 0.057 0.017 0.046 0.014 0.038 0.88 3.5 0.35 1.4 0.22 0.88 0.16 0.64 0.11 0.44 0.12 0.48 0.076 0.31 0.056 0.23 0.072 0.29 0.046 0.19 0.041 0.13 0.031 0.093 0.028 0.084 0.032 0.096 0.024 0.072 0.021 0.063 3,140 3,610 4,170 4,080 4,220 4,280 30 43 53 88 100 180 295 555 730 760 910 1,050 1,220 1,260 1,440 1,690 1,660 1,690 1,950 1,930 2,310 2,510 2,210 2,920 2,555 2,490 3,010 2,740 3,150 3,710 3,635 3,680 3,800 165 265 500 665 690 820 950 1,150 1,150 1,350 1,500 1,900 2,300 2,000 2,500 2,800 Part No. WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ EKY-350E□□222MM25S EKY-350E□□272MLP1S EKY-350E□□272MMN3S EKY-350E□□332ML40S EKY-350E□□332MMP1S EKY-350E□□392MM40S EKY-500E□□1R0ME11D EKY-500E□□2R2ME11D EKY-500E□□3R3ME11D EKY-500E□□4R7ME11D EKY-500E□□100ME11D EKY-500E□□220ME11D EKY-500E□□560MF11D EKY-500E□□101MHB5D EKY-500E□□121MH15D EKY-500E□□151MJC5S EKY-500E□□181MH20D EKY-500E□□221MJ16S EKY-500E□□271MJ20S EKY-500E□□271MK15S EKY-500E□□331MJ25S EKY-500E□□471MJ30S EKY-500E□□471MK20S EKY-500E□□471ML15S EKY-500E□□561MK25S EKY-500E□□561MM15S EKY-500E□□681MK30S EKY-500E□□821MK35S EKY-500E□□821ML20S EKY-500E□□102MK40S EKY-500E□□102ML25S EKY-500E□□102MM20S EKY-500E□□122MLN3S EKY-500E□□122MM25S EKY-500E□□152MLP1S EKY-500E□□182ML40S EKY-500E□□182MMN3S EKY-500E□□222MMP1S EKY-500E□□272MM40S EKY-630E□□150ME11D EKY-630E□□330MF11D EKY-630E□□560MHB5D EKY-630E□□820MH15D EKY-630E□□820MJC5S EKY-630E□□121MH20D EKY-630E□□121MJ16S EKY-630E□□181MJ20S EKY-630E□□181MK16S EKY-630E□□221MJ25S EKY-630E□□271MK20S EKY-630E□□391MK25S EKY-630E□□471MK30S EKY-630E□□471ML20S EKY-630E□□561MK35S EKY-630E□□681MK40S 680 16×25 680 18×20 820 16×31.5 820 18×25 63 1,000 16×35.5 1,200 16×40 1,200 18×31.5 1,500 18×35.5 1,800 18×40 68 10×12.5 100 10×16 120 10×20 150 10×25 150 12.5×16 220 12.5×20 330 12.5×25 330 16×20 390 12.5×30 470 12.5×35 80 470 16×25 470 18×20 560 12.5×40 680 16×31.5 680 18×25 820 16×35.5 820 18×31.5 1,000 16×40 1,000 18×35.5 1,200 18×40 6.8 5×11 15 6.3×11 27 8×11.5 39 8×15 47 10×12.5 56 8×20 68 10×16 82 10×20 100 12.5×16 120 10×25 150 12.5×20 220 12.5×25 100 220 16×20 270 12.5×30 330 12.5×35 330 16×25 330 18×20 390 12.5×40 470 16×31.5 470 18×25 560 16×35.5 560 18×31.5 680 16×40 680 18×35.5 820 18×40 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.025 0.030 0.021 0.024 0.019 0.018 0.020 0.018 0.017 0.17 0.11 0.084 0.069 0.11 0.062 0.047 0.048 0.042 0.036 0.038 0.045 0.032 0.032 0.036 0.029 0.030 0.027 0.027 0.026 1.4 0.57 0.36 0.25 0.17 0.19 0.11 0.084 0.11 0.069 0.062 0.047 0.048 0.042 0.036 0.038 0.045 0.032 0.032 0.036 0.029 0.030 0.027 0.027 0.026 0.075 0.090 0.063 0.072 0.057 0.054 0.060 0.054 0.051 0.66 0.47 0.34 0.28 0.34 0.18 0.14 0.15 0.13 0.11 0.12 0.14 0.095 0.095 0.11 0.086 0.090 0.081 0.081 0.077 5.6 2.3 1.4 1.0 0.66 0.76 0.47 0.34 0.34 0.28 0.18 0.14 0.15 0.13 0.11 0.12 0.14 0.095 0.095 0.11 0.086 0.090 0.081 0.081 0.077 2,600 2,500 2,850 2,800 2,900 3,400 3,300 3,400 3,500 480 600 800 900 750 1,100 1,250 1,350 1,500 1,650 1,700 1,500 1,800 1,850 1,750 2,000 1,900 2,200 2,200 2,700 125 205 355 450 480 565 600 800 750 900 1,100 1,250 1,350 1,500 1,650 1,700 1,500 1,800 1,850 1,750 2,000 1,900 2,200 2,200 2,700 Part No. EKY-630E□□681ML25S EKY-630E□□681MM20S EKY-630E□□821MLN3S EKY-630E□□821MM25S EKY-630E□□102MLP1S EKY-630E□□122ML40S EKY-630E□□122MMN3S EKY-630E□□152MMP1S EKY-630E□□182MM40S EKY-800E□□680MJC5S EKY-800E□□101MJ16S EKY-800E□□121MJ20S EKY-800E□□151MJ25S EKY-800E□□151MK16S EKY-800E□□221MK20S EKY-800E□□331MK25S EKY-800E□□331ML20S EKY-800E□□391MK30S EKY-800E□□471MK35S EKY-800E□□471ML25S EKY-800E□□471MM20S EKY-800E□□561MK40S EKY-800E□□681MLN3S EKY-800E□□681MM25S EKY-800E□□821MLP1S EKY-800E□□821MMN3S EKY-800E□□102ML40S EKY-800E□□102MMP1S EKY-800E□□122MM40S EKY-101E□□6R8ME11D EKY-101E□□150MF11D EKY-101E□□270MHB5D EKY-101E□□390MH15D EKY-101E□□470MJC5S EKY-101E□□560MH20D EKY-101E□□680MJ16S EKY-101E□□820MJ20S EKY-101E□□101MK16S EKY-101E□□121MJ25S EKY-101E□□151MK20S EKY-101E□□221MK25S EKY-101E□□221ML20S EKY-101E□□271MK30S EKY-101E□□331MK35S EKY-101E□□331ML25S EKY-101E□□331MM20S EKY-101E□□391MK40S EKY-101E□□471MLN3S EKY-101E□□471MM25S EKY-101E□□561MLP1S EKY-101E□□561MMN3S EKY-101E□□681ML40S EKY-101E□□681MMP1S EKY-101E□□821MM40S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 1.0 to 180 220 to 560 680 to 1,800 2,200 to 3,900 4,700 to 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, Downsized, 105℃ LZA Series LZA ・Adoption of innovative electrolyte and new technologies ・Very low impedance at high frequency Lower Z ・Endurance with ripple current: 4,000 to 7,000 hours at 105℃ Downsized ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) LXZ ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105℃ 6.3 to 35Vdc ±20% (M) I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V tanδ (Max.) 0.22 0.19 0.16 0.14 0.12 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. Rated voltage (Vdc) 6.3V 10V 16V 25V 35V Z(-55℃)/Z(+20℃) 4 3 3 3 3 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃. Time φ10 : 4,000hours φ12.5 : 5,000hours φ16 to φ18 : 7,000hours Rated voltage 6.3 to 10Vdc(φ10) 6.3 to 10Vdc(φ12.5 to φ18) 16 to 35Vdc Capacitance change ≦±30% of the initial value ≦±20% of the initial value ≦±20% of the initial value D.F.(tanδ) ≦300% of the initial specified value ≦200% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated voltage 6.3 to 10Vdc(φ10) 6.3 to 10Vdc(φ12.5 to φ18) 16 to 35Vdc Capacitance change ≦±30% of the initial value ≦±20% of the initial value ≦±20% of the initial value D.F.(tanδ) ≦300% of the initial specified value ≦200% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φd Sleeve (PET : Dark blue) F±0.5 ●Terminal Code : E φD φD' φd F φD' L' 15min. 4min. (φ10) (φ12.5 to φ18) L' 10 0.6 5.0 16 12.5 0.8 0.6 7.5 5.0 φD+0.5max. L+1.5max. 18 0.8 7.5 Gas escape end seal Vent ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L ZA AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 680µF:681, 2,200µF:222) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3, 25V:250) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, Downsized, 105℃ LZASeries ◆STANDARD RATINGS WV Cap (Vdc) (µF) Rated ripple Impedance Case size current (Ω max./ (mArms/ φD×L(mm) 20℃, 100kHz) 105℃, 100kHz) 1,500 10×12.5 1,800 10× 16 2,700 10× 20 3,300 10× 25 4,700 12.5× 20 6.3 6,800 12.5× 25 6,800 16× 20 8,200 18× 20 10,000 16× 25 12,000 18× 25 1,000 10×12.5 1,500 10× 16 2,200 10× 20 2,700 10× 25 3,300 12.5× 20 10 4,700 12.5× 25 4,700 16× 20 6,800 16× 25 6,800 18× 20 8,200 18× 25 820 10×12.5 1,000 10× 16 16 1,500 10× 20 1,800 10× 25 2,200 12.5× 20 0.063 0.049 0.035 0.033 0.029 0.022 0.026 0.025 0.019 0.018 0.063 0.049 0.035 0.033 0.029 0.022 0.026 0.019 0.025 0.018 0.063 0.049 0.035 0.033 0.029 960 1,240 1,550 1,740 1,890 2,350 2,330 2,640 2,760 2,850 960 1,240 1,550 1,740 1,890 2,350 2,330 2,760 2,640 2,850 960 1,240 1,550 1,740 1,890 Part No. ELZA6R3E□□152MJC5S ELZA6R3E□□182MJ16S ELZA6R3E□□272MJ20S ELZA6R3E□□332MJ25S ELZA6R3E□□472MK20S ELZA6R3E□□682MK25S ELZA6R3E□□682ML20S ELZA6R3E□□822MM20S ELZA6R3E□□103ML25S ELZA6R3E□□123MM25S ELZA100E□□102MJC5S ELZA100E□□152MJ16S ELZA100E□□222MJ20S ELZA100E□□272MJ25S ELZA100E□□332MK20S ELZA100E□□472MK25S ELZA100E□□472ML20S ELZA100E□□682ML25S ELZA100E□□682MM20S ELZA100E□□822MM25S ELZA160E□□821MJC5S ELZA160E□□102MJ16S ELZA160E□□152MJ20S ELZA160E□□182MJ25S ELZA160E□□222MK20S WV Cap (Vdc) (µF) 16 25 35 Rated ripple Impedance Case size current (Ω max./ (mArms/ φD×L(mm) 20℃, 100kHz) 105℃, 100kHz) 3,300 12.5 × 25 3,900 16 × 20 5,600 16 × 25 5,600 18 × 20 8,200 18 × 25 470 10 × 12.5 680 10 × 16 1,000 10 × 20 1,200 10 × 25 1,500 12.5 × 20 2,200 12.5 × 25 2,700 16 × 20 3,300 18 × 20 3,900 16 × 25 4,700 18 × 25 330 10 × 12.5 470 10 × 16 680 10 × 20 820 10 × 25 1,000 12.5 × 20 1,500 12.5 × 25 1,800 16 × 20 2,200 18 × 20 2,700 16 × 25 3,300 18 × 25 0.022 0.026 0.019 0.025 0.018 0.063 0.049 0.035 0.033 0.029 0.022 0.026 0.025 0.019 0.018 0.063 0.049 0.035 0.033 0.029 0.022 0.026 0.025 0.019 0.018 2,350 2,330 2,760 2,640 2,850 960 1,240 1,550 1,740 1,890 2,350 2,330 2,640 2,760 2,850 960 1,240 1,550 1,740 1,890 2,350 2,330 2,640 2,760 2,850 Part No. ELZA160E□□332MK25S ELZA160E□□392ML20S ELZA160E□□562ML25S ELZA160E□□562MM20S ELZA160E□□822MM25S ELZA250E□□471MJC5S ELZA250E□□681MJ16S ELZA250E□□102MJ20S ELZA250E□□122MJ25S ELZA250E□□152MK20S ELZA250E□□222MK25S ELZA250E□□272ML20S ELZA250E□□332MM20S ELZA250E□□392ML25S ELZA250E□□472MM25S ELZA350E□□331MJC5S ELZA350E□□471MJ16S ELZA350E□□681MJ20S ELZA350E□□821MJ25S ELZA350E□□102MK20S ELZA350E□□152MK25S ELZA350E□□182ML20S ELZA350E□□222MM20S ELZA350E□□272ML25S ELZA350E□□332MM25S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 330 to 470 680 to 1,800 2,200 to 3,900 4,700 to 12,000 120 0.50 0.60 0.75 0.85 1k 0.85 0.87 0.90 0.95 10k 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS LXZ Series Low impedance, Downsized, 105℃ LXZ Lower Z ・Adoption of innovative electrolyte and new technologies Downsized ・Very low impedance at high frequency LXY ・Endurance with ripple current: 2,000 to 8,000 hours at 105℃ Lower Z ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant LXV ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105℃ 6.3 to 63Vdc (at 20℃, 120Hz) ±20% (M) I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V tanδ(Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.08 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃. Time φ5 & 6.3 : 2,000hours φ8 : 3,000hours φ10 : 5,000hoursφ12.5 : 7,000hours φ16 & 18 : 8,000hours Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φd Sleeve (PET : Dark blue) F±0.5 ●Terminal Code : E φD φD' φd F φD' L' 15min. 4min. (φ5 to φ10) (φ12.5 to φ18) L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 φD+0.5max. L+1.5max. 16 0.8 7.5 18 0.8 7.5 Gas escape end seal Vent (Exceptφ5 & φ6.3) ◆PART NUMBERING SYSTEM 1 2 3 4 E LXZ 5 6 7 8 E 9 10 11 12 13 14 M 15 16 17 18 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 150µF:151, 2,200µF:222) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3, 25V:250, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, Downsized, 105℃ LXZSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ 150 330 470 680 820 1,000 1,200 1,200 1,500 2,200 2,700 3,300 3,900 6.3 4,700 5,600 5,600 6,800 6,800 6,800 8,200 10,000 10,000 12,000 12,000 15,000 18,000 100 220 330 470 680 680 1,000 1,000 1,200 1,500 1,800 2,200 2,200 10 3,300 3,900 3,900 4,700 5,600 5,600 5,600 6,800 6,800 8,200 8,200 10,000 10,000 12,000 47 100 220 330 470 470 560 16 680 1,000 1,200 1,500 1,500 2,200 2,700 5×11.5 6.3×11.5 6.3×15 8×12 10×12.5 8×15 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 12.5×35 16×20 12.5×40 16×25 18×20 16×30 16×35 18×25 16×40 18×30 18×35 18×40 5×11.5 6.3×11.5 6.3×15 8×12 8×15 10×12.5 8×20 10×16 10×20 10×25 10×30 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 12.5×40 16×25 18×20 16×30 18×25 16×35 18×30 16×40 18×35 18×40 5×11.5 6.3×11.5 6.3×15 8×12 8×15 10×12.5 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.50 0.25 0.18 0.12 0.090 0.090 0.080 0.068 0.052 0.045 0.037 0.038 0.030 0.025 0.022 0.029 0.017 0.022 0.028 0.019 0.017 0.020 0.015 0.018 0.016 0.015 0.50 0.25 0.18 0.12 0.090 0.090 0.080 0.068 0.052 0.045 0.037 0.037 0.038 0.030 0.025 0.029 0.022 0.017 0.022 0.028 0.019 0.020 0.017 0.018 0.015 0.016 0.015 0.50 0.25 0.18 0.12 0.090 0.090 0.080 0.068 0.052 0.045 0.037 0.038 0.030 0.025 1.0 0.50 0.36 0.24 0.18 0.18 0.16 0.136 0.104 0.090 0.074 0.076 0.060 0.050 0.044 0.058 0.034 0.044 0.056 0.038 0.034 0.040 0.030 0.036 0.032 0.030 1.0 0.50 0.36 0.24 0.18 0.18 0.16 0.136 0.104 0.090 0.074 0.074 0.076 0.060 0.050 0.058 0.044 0.034 0.044 0.056 0.038 0.040 0.034 0.036 0.030 0.032 0.030 1.0 0.50 0.36 0.24 0.18 0.18 0.16 0.136 0.104 0.090 0.074 0.076 0.060 0.050 175 290 400 555 760 730 810 1,050 1,220 1,440 1,690 1,660 1,950 2,310 2,510 2,210 2,870 2,560 2,490 3,010 3,150 2,740 3,710 3,330 3,680 3,800 175 290 400 555 730 760 810 1,050 1,220 1,440 1,690 1,690 1,660 1,950 2,310 2,210 2,510 2,870 2,560 2,490 3,010 2,740 3,150 3,330 3,710 3,680 3,800 175 290 400 555 730 760 810 1,050 1,220 1,440 1,690 1,660 1,950 2,310 Part No. WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ ELXZ6R3E□□151MEB5D ELXZ6R3E□□331MFB5D ELXZ6R3E□□471MF15D ELXZ6R3E□□681MH12D ELXZ6R3E□□821MJC5S ELXZ6R3E□□102MH15D ELXZ6R3E□□122MH20D ELXZ6R3E□□122MJ16S ELXZ6R3E□□152MJ20S ELXZ6R3E□□222MJ25S ELXZ6R3E□□272MJ30S ELXZ6R3E□□332MK20S ELXZ6R3E□□392MK25S ELXZ6R3E□□472MK30S ELXZ6R3E□□562MK35S ELXZ6R3E□□562ML20S ELXZ6R3E□□682MK40S ELXZ6R3E□□682ML25S ELXZ6R3E□□682MM20S ELXZ6R3E□□822ML30S ELXZ6R3E□□103ML35S ELXZ6R3E□□103MM25S ELXZ6R3E□□123ML40S ELXZ6R3E□□123MM30S ELXZ6R3E□□153MM35S ELXZ6R3E□□183MM40S ELXZ100E□□101MEB5D ELXZ100E□□221MFB5D ELXZ100E□□331MF15D ELXZ100E□□471MH12D ELXZ100E□□681MH15D ELXZ100E□□681MJC5S ELXZ100E□□102MH20D ELXZ100E□□102MJ16S ELXZ100E□□122MJ20S ELXZ100E□□152MJ25S ELXZ100E□□182MJ30S ELXZ100E□□222MJ30S ELXZ100E□□222MK20S ELXZ100E□□332MK25S ELXZ100E□□392MK30S ELXZ100E□□392ML20S ELXZ100E□□472MK35S ELXZ100E□□562MK40S ELXZ100E□□562ML25S ELXZ100E□□562MM20S ELXZ100E□□682ML30S ELXZ100E□□682MM25S ELXZ100E□□822ML35S ELXZ100E□□822MM30S ELXZ100E□□103ML40S ELXZ100E□□103MM35S ELXZ100E□□123MM40S ELXZ160E□□470MEB5D ELXZ160E□□101MFB5D ELXZ160E□□221MF15D ELXZ160E□□331MH12D ELXZ160E□□471MH15D ELXZ160E□□471MJC5S ELXZ160E□□561MH20D ELXZ160E□□681MJ16S ELXZ160E□□102MJ20S ELXZ160E□□122MJ25S ELXZ160E□□152MJ30S ELXZ160E□□152MK20S ELXZ160E□□222MK25S ELXZ160E□□272MK30S 2,700 3,300 3,900 3,900 3,900 4,700 16 4,700 5,600 5,600 6,800 8,200 10,000 47 100 150 220 330 330 390 470 680 820 1,000 1,000 1,500 1,800 25 1,800 2,200 2,200 2,200 2,700 2,700 3,300 3,300 3,300 3,300 3,900 3,900 4,700 4,700 5,600 33 56 100 150 220 220 270 330 470 560 560 680 680 35 1,000 1,000 1,200 1,200 1,500 1,800 1,800 1,800 2,200 2,200 2,200 2,200 2,700 16×20 12.5×35 12.5×40 16×25 18×20 16×30 18×25 16×35 18×30 16×40 18×35 18×40 5×11.5 6.3×11.5 6.3×15 8×12 8×15 10×12.5 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×30 12.5×35 18×20 12.5×40 16×25 16×25 16×30 18×20 18×25 16×35 18×30 16×40 18×35 18×40 5×11.5 6.3×11.5 6.3×15 8×12 8×15 10×12.5 8×20 10×16 10×20 10×20 10×25 10×30 12.5×20 12.5×20 12.5×25 12.5×30 16×20 12.5×35 12.5×40 16×25 18×20 16×25 16×30 18×20 18×25 16×35 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.029 0.022 0.017 0.022 0.028 0.019 0.020 0.017 0.018 0.015 0.016 0.015 0.50 0.25 0.18 0.12 0.090 0.090 0.080 0.068 0.052 0.045 0.037 0.038 0.030 0.025 0.029 0.025 0.022 0.028 0.017 0.022 0.022 0.019 0.028 0.020 0.017 0.018 0.015 0.016 0.015 0.50 0.25 0.18 0.12 0.090 0.090 0.080 0.068 0.052 0.052 0.045 0.037 0.038 0.038 0.030 0.025 0.029 0.022 0.017 0.022 0.028 0.022 0.019 0.028 0.020 0.017 0.058 0.044 0.034 0.044 0.056 0.038 0.040 0.034 0.036 0.030 0.032 0.030 1.0 0.50 0.36 0.24 0.18 0.18 0.16 0.136 0.104 0.090 0.074 0.076 0.060 0.050 0.058 0.050 0.044 0.056 0.034 0.044 0.044 0.038 0.056 0.040 0.034 0.036 0.030 0.032 0.030 1.0 0.50 0.36 0.24 0.18 0.18 0.16 0.136 0.104 0.104 0.090 0.074 0.076 0.076 0.060 0.050 0.058 0.044 0.034 0.044 0.056 0.044 0.038 0.056 0.040 0.034 2,210 2,510 2,870 2,560 2,490 3,010 2,740 3,150 3,330 3,710 3,680 3,800 175 290 400 555 730 760 810 1,050 1,220 1,440 1,690 1,660 1,950 2,310 2,210 2,310 2,510 2,490 2,870 2,560 2,560 3,010 2,490 2,740 3,150 3,330 3,710 3,680 3,800 175 290 400 555 730 760 810 1,050 1,220 1,220 1,440 1,690 1,660 1,660 1,950 2,310 2,210 2,510 2,870 2,560 2,490 2,560 3,010 2,490 2,740 3,150 Part No. ELXZ160E□□272ML20S ELXZ160E□□332MK35S ELXZ160E□□392MK40S ELXZ160E□□392ML25S ELXZ160E□□392MM20S ELXZ160E□□472ML30S ELXZ160E□□472MM25S ELXZ160E□□562ML35S ELXZ160E□□562MM30S ELXZ160E□□682ML40S ELXZ160E□□822MM35S ELXZ160E□□103MM40S ELXZ250E□□470MEB5D ELXZ250E□□101MFB5D ELXZ250E□□151MF15D ELXZ250E□□221MH12D ELXZ250E□□331MH15D ELXZ250E□□331MJC5S ELXZ250E□□391MH20D ELXZ250E□□471MJ16S ELXZ250E□□681MJ20S ELXZ250E□□821MJ25S ELXZ250E□□102MJ30S ELXZ250E□□102MK20S ELXZ250E□□152MK25S ELXZ250E□□182MK30S ELXZ250E□□182ML20S ELXZ250E□□222MK30S ELXZ250E□□222MK35S ELXZ250E□□222MM20S ELXZ250E□□272MK40S ELXZ250E□□272ML25S ELXZ250E□□332ML25S ELXZ250E□□332ML30S ELXZ250E□□332MM20S ELXZ250E□□332MM25S ELXZ250E□□392ML35S ELXZ250E□□392MM30S ELXZ250E□□472ML40S ELXZ250E□□472MM35S ELXZ250E□□562MM40S ELXZ350E□□330MEB5D ELXZ350E□□560MFB5D ELXZ350E□□101MF15D ELXZ350E□□151MH12D ELXZ350E□□221MH15D ELXZ350E□□221MJC5S ELXZ350E□□271MH20D ELXZ350E□□331MJ16S ELXZ350E□□471MJ20S ELXZ350E□□561MJ20S ELXZ350E□□561MJ25S ELXZ350E□□681MJ30S ELXZ350E□□681MK20S ELXZ350E□□102MK20S ELXZ350E□□102MK25S ELXZ350E□□122MK30S ELXZ350E□□122ML20S ELXZ350E□□152MK35S ELXZ350E□□182MK40S ELXZ350E□□182ML25S ELXZ350E□□182MM20S ELXZ350E□□222ML25S ELXZ350E□□222ML30S ELXZ350E□□222MM20S ELXZ350E□□222MM25S ELXZ350E□□272ML35S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, Downsized, 105℃ LXZSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ 35 50 2,700 3,300 3,300 3,900 4,700 22 47 68 100 120 120 180 180 220 330 390 390 470 560 680 680 820 820 1,000 1,000 1,200 1,200 1,500 1,800 1,800 18×30 16×40 18×35 18×40 18×40 5×11.5 6.3×11.5 6.3×15 8×12 8×15 10×12.5 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×20 12.5×25 12.5×30 16×20 12.5×35 18×20 12.5×40 16×25 16×30 18×25 16×35 16×40 18×30 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.018 0.015 0.016 0.015 0.015 0.90 0.45 0.31 0.22 0.16 0.16 0.12 0.13 0.088 0.073 0.054 0.059 0.059 0.044 0.039 0.048 0.033 0.042 0.029 0.034 0.028 0.029 0.025 0.021 0.025 0.036 0.030 0.032 0.030 0.030 1.8 0.90 0.62 0.44 0.32 0.32 0.24 0.26 0.18 0.15 0.11 0.12 0.12 0.088 0.078 0.096 0.066 0.084 0.058 0.068 0.056 0.058 0.050 0.042 0.050 3,330 3,710 3,680 3,800 3,800 155 260 360 485 635 620 730 850 1,050 1,250 1,500 1,480 1,480 1,840 2,220 1,840 2,290 1,980 2,500 2,240 2,700 2,610 2,800 3,200 3,000 Part No. WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ ELXZ350E□□272MM30S ELXZ350E□□332ML40S ELXZ350E□□332MM35S ELXZ350E□□392MM40S ELXZ350E□□472MM40S ELXZ500E□□220MEB5D ELXZ500E□□470MFB5D ELXZ500E□□680MF15D ELXZ500E□□101MH12D ELXZ500E□□121MH15D ELXZ500E□□121MJC5S ELXZ500E□□181MH20D ELXZ500E□□181MJ16S ELXZ500E□□221MJ20S ELXZ500E□□331MJ25S ELXZ500E□□391MJ30S ELXZ500E□□391MK20S ELXZ500E□□471MK20S ELXZ500E□□561MK25S ELXZ500E□□681MK30S ELXZ500E□□681ML20S ELXZ500E□□821MK35S ELXZ500E□□821MM20S ELXZ500E□□102MK40S ELXZ500E□□102ML25S ELXZ500E□□122ML30S ELXZ500E□□122MM25S ELXZ500E□□152ML35S ELXZ500E□□182ML40S ELXZ500E□□182MM30S 50 63 2,200 2,700 12 22 39 68 100 100 120 150 180 220 330 330 390 470 470 680 680 680 820 820 820 1,000 1,000 1,200 1,200 1,500 1,800 2,200 18×35 18×40 5×11.5 6.3×11.5 6.3×15 8×12 8×15 10×12.5 10×16 8×20 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 18×20 12.5×40 16×30 18×25 16×30 16×35 16×40 18×30 18×35 18×40 18×40 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.023 0.020 1.9 1.0 0.61 0.34 0.27 0.255 0.19 0.21 0.145 0.13 0.090 0.085 0.070 0.055 0.059 0.047 0.050 0.055 0.042 0.043 0.043 0.043 0.036 0.030 0.032 0.030 0.025 0.025 0.046 0.040 4.0 2.0 1.4 0.75 0.65 0.51 0.38 0.52 0.29 0.26 0.18 0.17 0.14 0.11 0.12 0.094 0.10 0.11 0.084 0.086 0.086 0.086 0.072 0.060 0.064 0.060 0.050 0.050 3,100 3,400 145 240 330 405 535 540 600 690 890 1,050 1,300 1,290 1,720 2,090 1,770 2,270 2,160 2,290 2,560 2,670 2,590 2,670 2,770 2,850 2,950 3,100 3,210 3,210 Part No. ELXZ500E□□222MM35S ELXZ500E□□272MM40S ELXZ630E□□120MEB5D ELXZ630E□□220MFB5D ELXZ630E□□390MF15D ELXZ630E□□680MH12D ELXZ630E□□101MH15D ELXZ630E□□101MJC5S ELXZ630E□□121MJ16S ELXZ630E□□151MH20D ELXZ630E□□181MJ20S ELXZ630E□□221MJ25S ELXZ630E□□331MJ30S ELXZ630E□□331MK20S ELXZ630E□□391MK25S ELXZ630E□□471MK30S ELXZ630E□□471ML20S ELXZ630E□□681MK35S ELXZ630E□□681ML25S ELXZ630E□□681MM20S ELXZ630E□□821MK40S ELXZ630E□□821ML30S ELXZ630E□□821MM25S ELXZ630E□□102ML30S ELXZ630E□□102ML35S ELXZ630E□□122ML40S ELXZ630E□□122MM30S ELXZ630E□□152MM35S ELXZ630E□□182MM40S ELXZ630E□□222MM40S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 12 to 180 220 to 560 680 to 1,800 2,200 to 3,900 4,700 to 18,000 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS LXY Low impedance, 105℃ LXZ Series ・Adoption of innovative electrolyte and new technologies ・Endurance with ripple current : 2,000 to 8,000 hours at 105℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. Lower Z Downsized LXY Lower Z LXV ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105℃ 10 to 63Vdc ±20% (M) I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V tanδ (Max.) 0.19 0.16 0.14 0.12 0.10 0.10 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. 10 to 50Vdc : 3max. Z(-55℃)/Z(+20℃) 63Vdc : 6max. Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃. Time φ5 & 6.3 : 2,000hours φ8 : 3,000hoursφ10 : 5,000hoursφ12.5 : 7,000hoursφ16 & 18 : 8,000hours Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φD' φd Sleeve (PET : Dark blue) F±0.5 ● Terminal Code : E L' 15min. 4min. (φ5 to φ10) (φ12.5 to φ16) φD φd F φD' L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 φD+0.5max. L+1.5max. 16 0.8 7.5 Gas escape end seal Vent (Except φ5 & φ6.3) ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L XY AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 120µF:121, 2,200µF:222) Lead forming·taping code Terminal code Voltage code (ex. 10V:100, 25V:250, 63V:630) Series code Category Please refer to "Product code guide (radial lead type)" ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 10 to 180 220 to 560 680 to 1,800 2,200 to 3,900 4,700 to 8,200 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ LXYSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ 10 16 25 82 180 220 330 390 470 680 680 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,300 3,900 3,900 5,600 6,800 8,200 56 120 180 270 270 330 470 470 680 820 1,200 1,200 1,500 2,200 2,200 2,700 2,700 3,300 3,900 4,700 5,600 39 82 120 150 180 220 330 330 470 560 820 820 1,000 1,500 1,500 1,800 1,800 2,200 2,700 3,300 3,900 5×11.5 6.3×11.5 6.3×15 8×12 10×12.5 8×15 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 12.5×35 16×20 12.5×40 16×25 16×30 16×35 16×40 5×11.5 6.3×11.5 6.3×15 8×12 10×12.5 8×15 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 12.5×40 16×30 16×35 16×40 5×11.5 6.3×11.5 6.3×15 8×12 10×12.5 8×15 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 12.5×40 16×30 16×35 16×40 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.75 0.35 0.25 0.17 0.12 0.13 0.095 0.084 0.062 0.052 0.044 0.046 0.034 0.030 0.024 0.038 0.022 0.028 0.025 0.022 0.018 0.75 0.35 0.25 0.17 0.12 0.13 0.095 0.084 0.062 0.052 0.044 0.046 0.034 0.030 0.038 0.024 0.028 0.022 0.025 0.022 0.018 0.75 0.35 0.25 0.17 0.12 0.13 0.095 0.084 0.062 0.052 0.044 0.046 0.034 0.030 0.038 0.024 0.028 0.022 0.025 0.022 0.018 1.5 0.70 0.50 0.34 0.24 0.26 0.19 0.17 0.13 0.11 0.088 0.092 0.068 0.060 0.048 0.076 0.044 0.056 0.050 0.044 0.036 1.5 0.70 0.50 0.34 0.24 0.26 0.19 0.17 0.13 0.11 0.088 0.092 0.068 0.060 0.076 0.048 0.056 0.044 0.050 0.044 0.036 1.5 0.70 0.50 0.34 0.24 0.26 0.19 0.17 0.13 0.11 0.088 0.092 0.068 0.060 0.076 0.048 0.056 0.044 0.050 0.044 0.036 163 273 390 445 625 555 740 825 1,040 1,260 1,440 1,340 1,690 1,950 2,220 1,630 2,390 2,070 2,350 2,550 2,900 163 273 390 445 625 555 740 825 1,040 1,260 1,440 1,340 1,690 1,950 1,630 2,220 2,070 2,390 2,350 2,550 2,900 163 273 390 445 625 555 740 825 1,040 1,260 1,440 1,340 1,690 1,950 1,630 2,220 2,070 2,390 2,350 2,550 2,900 Part No. WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ ELXY100E□□820MEB5D ELXY100E□□181MFB5D ELXY100E□□221MF15D ELXY100E□□331MH12D ELXY100E□□391MJC5S ELXY100E□□471MH15D ELXY100E□□681MH20D ELXY100E□□681MJ16S ELXY100E□□102MJ20S ELXY100E□□122MJ25S ELXY100E□□152MJ30S ELXY100E□□182MK20S ELXY100E□□222MK25S ELXY100E□□272MK30S ELXY100E□□332MK35S ELXY100E□□332ML20S ELXY100E□□392MK40S ELXY100E□□392ML25S ELXY100E□□562ML30S ELXY100E□□682ML35S ELXY100E□□822ML40S ELXY160E□□560MEB5D ELXY160E□□121MFB5D ELXY160E□□181MF15D ELXY160E□□271MH12D ELXY160E□□271MJC5S ELXY160E□□331MH15D ELXY160E□□471MH20D ELXY160E□□471MJ16S ELXY160E□□681MJ20S ELXY160E□□821MJ25S ELXY160E□□122MJ30S ELXY160E□□122MK20S ELXY160E□□152MK25S ELXY160E□□222MK30S ELXY160E□□222ML20S ELXY160E□□272MK35S ELXY160E□□272ML25S ELXY160E□□332MK40S ELXY160E□□392ML30S ELXY160E□□472ML35S ELXY160E□□562ML40S ELXY250E□□390MEB5D ELXY250E□□820MFB5D ELXY250E□□121MF15D ELXY250E□□151MH12D ELXY250E□□181MJC5S ELXY250E□□221MH15D ELXY250E□□331MH20D ELXY250E□□331MJ16S ELXY250E□□471MJ20S ELXY250E□□561MJ25S ELXY250E□□821MJ30S ELXY250E□□821MK20S ELXY250E□□102MK25S ELXY250E□□152MK30S ELXY250E□□152ML20S ELXY250E□□182MK35S ELXY250E□□182ML25S ELXY250E□□222MK40S ELXY250E□□272ML30S ELXY250E□□332ML35S ELXY250E□□392ML40S 35 50 63 27 56 82 120 120 180 220 220 330 390 560 560 680 1,000 1,000 1,200 1,200 1,500 1,800 2,200 2,700 18 39 56 68 82 82 120 120 180 220 330 330 470 560 680 680 820 820 1,000 1,200 1,500 10 18 33 47 56 68 68 82 120 150 180 220 270 330 390 470 470 560 680 820 1,000 5×11.5 6.3×11.5 6.3×15 8×12 10×12.5 8×15 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 12.5×40 16×30 16×35 16×40 5×11.5 6.3×11.5 6.3×15 8×12 8×15 10×12.5 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 12.5×35 16×20 12.5×40 16×25 16×30 16×35 16×40 5×11.5 6.3×11.5 6.3×15 8×12 10×12.5 8×15 10×16 8×20 10×20 10×25 10×30 12.5×20 12.5×25 16×20 12.5×30 12.5×35 16×25 12.5×40 16×30 16×35 16×40 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.75 0.35 0.25 0.17 0.12 0.13 0.095 0.084 0.062 0.052 0.044 0.046 0.034 0.030 0.038 0.024 0.028 0.022 0.025 0.022 0.018 1.2 0.54 0.34 0.30 0.20 0.20 0.14 0.13 0.088 0.073 0.054 0.059 0.044 0.039 0.033 0.050 0.029 0.034 0.030 0.027 0.024 1.9 1.0 0.61 0.47 0.27 0.34 0.21 0.21 0.16 0.13 0.10 0.11 0.074 0.085 0.068 0.063 0.055 0.051 0.046 0.040 0.036 1.5 0.70 0.50 0.34 0.24 0.26 0.19 0.17 0.13 0.11 0.088 0.092 0.068 0.060 0.076 0.048 0.056 0.044 0.050 0.044 0.036 2.4 1.1 0.68 0.60 0.40 0.40 0.28 0.26 0.18 0.15 0.11 0.12 0.088 0.078 0.066 0.10 0.058 0.068 0.060 0.054 0.048 4.8 2.5 1.6 1.2 0.68 0.85 0.53 0.53 0.40 0.33 0.25 0.28 0.19 0.22 0.17 0.16 0.14 0.13 0.12 0.10 0.090 163 273 390 445 625 555 740 825 1,040 1,260 1,440 1,340 1,690 1,950 1,630 2,220 2,070 2,390 2,350 2,550 2,900 129 219 310 340 470 480 610 755 945 1,150 1,260 1,190 1,490 1,720 1,890 1,420 2,030 1,880 2,150 2,320 2,540 103 161 233 274 418 360 525 500 650 783 960 870 1,150 1,100 1,280 1,390 1,480 1,530 1,720 1,910 2,070 Part No. ELXY350E□□270MEB5D ELXY350E□□560MFB5D ELXY350E□□820MF15D ELXY350E□□121MH12D ELXY350E□□121MJC5S ELXY350E□□181MH15D ELXY350E□□221MH20D ELXY350E□□221MJ16S ELXY350E□□331MJ20S ELXY350E□□391MJ25S ELXY350E□□561MJ30S ELXY350E□□561MK20S ELXY350E□□681MK25S ELXY350E□□102MK30S ELXY350E□□102ML20S ELXY350E□□122MK35S ELXY350E□□122ML25S ELXY350E□□152MK40S ELXY350E□□182ML30S ELXY350E□□222ML35S ELXY350E□□272ML40S ELXY500E□□180MEB5D ELXY500E□□390MFB5D ELXY500E□□560MF15D ELXY500E□□680MH12D ELXY500E□□820MH15D ELXY500E□□820MJC5S ELXY500E□□121MH20D ELXY500E□□121MJ16S ELXY500E□□181MJ20S ELXY500E□□221MJ25S ELXY500E□□331MJ30S ELXY500E□□331MK20S ELXY500E□□471MK25S ELXY500E□□561MK30S ELXY500E□□681MK35S ELXY500E□□681ML20S ELXY500E□□821MK40S ELXY500E□□821ML25S ELXY500E□□102ML30S ELXY500E□□122ML35S ELXY500E□□152ML40S ELXY630E□□100MEB5D ELXY630E□□180MFB5D ELXY630E□□330MF15D ELXY630E□□470MH12D ELXY630E□□560MJC5S ELXY630E□□680MH15D ELXY630E□□680MJ16S ELXY630E□□820MH20D ELXY630E□□121MJ20S ELXY630E□□151MJ25S ELXY630E□□181MJ30S ELXY630E□□221MK20S ELXY630E□□271MK25S ELXY630E□□331ML20S ELXY630E□□391MK30S ELXY630E□□471MK35S ELXY630E□□471ML25S ELXY630E□□561MK40S ELXY630E□□681ML30S ELXY630E□□821ML35S ELXY630E□□102ML40S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS LXV Low impedance, 105℃ LXY Series Lower Z ・Low impedance LXV ・Endurance with ripple current : 2,000 to 5,000 hours at 105℃ Lower Z ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) Longer life KMG ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -55 to +105℃ 6.3 to 100Vdc (at 20℃, 120Hz) ±20% (M) I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V tanδ (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.10 0.09 0.08 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Capacitance changeΔC (-55℃ /+20℃) 0.7min. Max. impedance ratio (-55℃ /+20℃) 3max.(6.3Vdc: 4max.) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃. Time φ5 to 6.3 : 2,000hours φ8 &10: 3,000hours φ12.5toφ18: 5,000hours Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φD' φd Sleeve (PET : Brown) F±0.5 ●Terminal Code : E L' 15min. 4min. Vent (Except φ5 & φ6.3) (φ5 to φ10) (φ12.5 to φ18) φD φd F φD' L' 5 0.5 2.0 6.3 0.5 2.5 10 12.5 8 0.6 0.6 0.6 3.5 5.0 5.0 φD+0.5max. L+1.5max. 16 0.8 7.5 18 0.8 7.5 Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L XV AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 120µF:121, 1,500µF:152) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3, 25V:250, 100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ LXVSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ 120 220 330 390 470 560 680 820 1,200 1,500 2,200 2,200 2,700 6.3 3,900 3,900 4,700 5,600 5,600 5,600 6,800 6,800 8,200 10,000 10,000 12,000 15,000 82 180 270 330 390 470 680 680 1,000 1,200 1,500 1,800 2,200 10 2,700 3,300 3,300 3,900 3,900 3,900 4,700 5,600 6,800 6,800 8,200 8,200 10,000 56 120 180 270 270 330 470 16 470 680 820 1,200 1,200 1,500 2,200 2,200 5×11.5 6.3×11.5 6.3×15 8×12 10×12.5 8×15 10×16 8×20 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 12.5×40 16×25 18×20 16×30 18×25 16×35 16×40 18×30 18×35 18×40 5×11.5 6.3×11.5 6.3×15 8×12 10×12.5 8×15 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 12.5×35 16×20 12.5×40 16×25 18×20 18×25 16×30 16×35 18×30 16×40 18×35 18×40 5×11.5 6.3×11.5 6.3×15 8×12 10×12.5 8×15 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.72 0.38 0.27 0.20 0.12 0.16 0.084 0.11 0.062 0.052 0.044 0.046 0.034 0.030 0.038 0.027 0.024 0.028 0.036 0.025 0.027 0.022 0.018 0.024 0.021 0.017 0.72 0.38 0.27 0.20 0.12 0.16 0.11 0.084 0.062 0.052 0.044 0.046 0.034 0.030 0.027 0.038 0.024 0.028 0.036 0.027 0.025 0.022 0.024 0.018 0.021 0.017 0.72 0.38 0.27 0.20 0.12 0.16 0.11 0.084 0.062 0.052 0.044 0.046 0.034 0.030 0.038 1.8 0.95 0.68 0.50 0.30 0.40 0.21 0.28 0.16 0.13 0.11 0.12 0.085 0.075 0.095 0.068 0.060 0.070 0.090 0.063 0.068 0.055 0.045 0.060 0.053 0.043 1.8 0.95 0.68 0.50 0.30 0.40 0.28 0.21 0.16 0.13 0.11 0.12 0.085 0.075 0.068 0.095 0.060 0.070 0.090 0.068 0.063 0.055 0.060 0.045 0.053 0.043 1.8 0.95 0.68 0.50 0.30 0.40 0.28 0.21 0.16 0.13 0.11 0.12 0.085 0.075 0.095 165 255 330 415 635 495 825 640 1,060 1,260 1,450 1,360 1,700 1,980 1,770 2,230 2,460 2,190 1,940 2,510 2,350 2,770 3,110 2,720 3,050 3,300 165 255 330 415 635 495 640 825 1,060 1,260 1,450 1,360 1,700 1,980 2,230 1,770 2,460 2,190 1,940 2,350 2,510 2,770 2,720 3,110 3,050 3,300 165 255 330 415 635 495 640 825 1,060 1,260 1,450 1,360 1,700 1,980 1,770 Part No. WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ ELXV6R3E□□121MEB5D ELXV6R3E□□221MFB5D ELXV6R3E□□331MF15D ELXV6R3E□□391MH12D ELXV6R3E□□471MJC5S ELXV6R3E□□561MH15D ELXV6R3E□□681MJ16S ELXV6R3E□□821MH20D ELXV6R3E□□122MJ20S ELXV6R3E□□152MJ25S ELXV6R3E□□222MJ30S ELXV6R3E□□222MK20S ELXV6R3E□□272MK25S ELXV6R3E□□392MK30S ELXV6R3E□□392ML20S ELXV6R3E□□472MK35S ELXV6R3E□□562MK40S ELXV6R3E□□562ML25S ELXV6R3E□□562MM20S ELXV6R3E□□682ML30S ELXV6R3E□□682MM25S ELXV6R3E□□822ML35S ELXV6R3E□□103ML40S ELXV6R3E□□103MM30S ELXV6R3E□□123MM35S ELXV6R3E□□153MM40S ELXV100E□□820MEB5D ELXV100E□□181MFB5D ELXV100E□□271MF15D ELXV100E□□331MH12D ELXV100E□□391MJC5S ELXV100E□□471MH15D ELXV100E□□681MH20D ELXV100E□□681MJ16S ELXV100E□□102MJ20S ELXV100E□□122MJ25S ELXV100E□□152MJ30S ELXV100E□□182MK20S ELXV100E□□222MK25S ELXV100E□□272MK30S ELXV100E□□332MK35S ELXV100E□□332ML20S ELXV100E□□392MK40S ELXV100E□□392ML25S ELXV100E□□392MM20S ELXV100E□□472MM25S ELXV100E□□562ML30S ELXV100E□□682ML35S ELXV100E□□682MM30S ELXV100E□□822ML40S ELXV100E□□822MM35S ELXV100E□□103MM40S ELXV160E□□560MEB5D ELXV160E□□121MFB5D ELXV160E□□181MF15D ELXV160E□□271MH12D ELXV160E□□271MJC5S ELXV160E□□331MH15D ELXV160E□□471MH20D ELXV160E□□471MJ16S ELXV160E□□681MJ20S ELXV160E□□821MJ25S ELXV160E□□122MJ30S ELXV160E□□122MK20S ELXV160E□□152MK25S ELXV160E□□222MK30S ELXV160E□□222ML20S 16 25 35 50 2,700 2,700 3,300 3,300 3,900 3,900 4,700 4,700 5,600 6,800 8,200 39 82 120 150 180 220 330 330 470 560 820 820 1,000 1,500 1,500 1,800 1,800 2,200 2,200 2,700 2,700 3,300 3,300 3,900 3,900 4,700 27 56 82 120 120 180 220 220 330 390 560 560 680 1,000 1,000 1,200 1,200 1,500 1,500 1,800 1,800 2,200 2,200 2,700 2,700 3,300 18 39 56 68 12.5×35 16×25 12.5×40 18×20 16×30 18×25 16×35 18×30 16×40 18×35 18×40 5×11.5 6.3×11.5 6.3×15 8×12 10×12.5 8×15 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 12.5×40 18×20 16×30 18×25 16×35 18×30 16×40 18×35 18×40 5×11.5 6.3×11.5 6.3×15 8×12 10×12.5 8×15 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 12.5×40 18×20 16×30 18×25 16×35 18×30 16×40 18×35 18×40 5×11.5 6.3×11.5 6.3×15 8×12 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.027 0.028 0.024 0.036 0.025 0.027 0.022 0.024 0.018 0.021 0.017 0.72 0.38 0.27 0.20 0.12 0.16 0.11 0.084 0.062 0.052 0.044 0.046 0.034 0.030 0.038 0.027 0.028 0.024 0.036 0.025 0.027 0.022 0.024 0.018 0.021 0.017 0.72 0.38 0.27 0.20 0.12 0.16 0.11 0.084 0.062 0.052 0.044 0.046 0.034 0.030 0.038 0.027 0.028 0.024 0.036 0.025 0.027 0.022 0.024 0.018 0.021 0.017 1.1 0.56 0.41 0.29 0.068 0.070 0.060 0.090 0.063 0.068 0.055 0.060 0.045 0.053 0.043 1.8 0.95 0.68 0.50 0.30 0.40 0.28 0.21 0.16 0.13 0.11 0.12 0.085 0.075 0.095 0.068 0.070 0.060 0.090 0.063 0.068 0.055 0.060 0.045 0.053 0.043 1.8 0.95 0.68 0.50 0.30 0.40 0.28 0.21 0.16 0.13 0.11 0.12 0.085 0.075 0.095 0.068 0.070 0.060 0.090 0.063 0.068 0.055 0.060 0.045 0.053 0.043 3.3 1.6 1.2 0.84 2,230 2,190 2,460 1,940 2,510 2,350 2,770 2,720 3,110 3,050 3,300 165 255 330 415 635 495 640 825 1,060 1,260 1,450 1,360 1,700 1,980 1,770 2,230 2,190 2,460 1,940 2,510 2,350 2,770 2,720 3,110 3,050 3,300 165 255 330 415 635 495 640 825 1,060 1,260 1,450 1,360 1,700 1,980 1,770 2,230 2,190 2,460 1,940 2,510 2,350 2,770 2,720 3,110 3,050 3,300 165 255 310 415 Part No. ELXV160E□□272MK35S ELXV160E□□272ML25S ELXV160E□□332MK40S ELXV160E□□332MM20S ELXV160E□□392ML30S ELXV160E□□392MM25S ELXV160E□□472ML35S ELXV160E□□472MM30S ELXV160E□□562ML40S ELXV160E□□682MM35S ELXV160E□□822MM40S ELXV250E□□390MEB5D ELXV250E□□820MFB5D ELXV250E□□121MF15D ELXV250E□□151MH12D ELXV250E□□181MJC5S ELXV250E□□221MH15D ELXV250E□□331MH20D ELXV250E□□331MJ16S ELXV250E□□471MJ20S ELXV250E□□561MJ25S ELXV250E□□821MJ30S ELXV250E□□821MK20S ELXV250E□□102MK25S ELXV250E□□152MK30S ELXV250E□□152ML20S ELXV250E□□182MK35S ELXV250E□□182ML25S ELXV250E□□222MK40S ELXV250E□□222MM20S ELXV250E□□272ML30S ELXV250E□□272MM25S ELXV250E□□332ML35S ELXV250E□□332MM30S ELXV250E□□392ML40S ELXV250E□□392MM35S ELXV250E□□472MM40S ELXV350E□□270MEB5D ELXV350E□□560MFB5D ELXV350E□□820MF15D ELXV350E□□121MH12D ELXV350E□□121MJC5S ELXV350E□□181MH15D ELXV350E□□221MH20D ELXV350E□□221MJ16S ELXV350E□□331MJ20S ELXV350E□□391MJ25S ELXV350E□□561MJ30S ELXV350E□□561MK20S ELXV350E□□681MK25S ELXV350E□□102MK30S ELXV350E□□102ML20S ELXV350E□□122MK35S ELXV350E□□122ML25S ELXV350E□□152MK40S ELXV350E□□152MM20S ELXV350E□□182ML30S ELXV350E□□182MM25S ELXV350E□□222ML35S ELXV350E□□222MM30S ELXV350E□□272ML40S ELXV350E□□272MM35S ELXV350E□□332MM40S ELXV500E□□180MEB5D ELXV500E□□390MFB5D ELXV500E□□560MF15D ELXV500E□□680MH12D □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, 105℃ LXVSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ 82 82 120 120 180 220 330 330 470 560 680 50 680 820 820 820 1,000 1,000 1,200 1,500 1,500 1,800 2,200 12 27 39 47 56 68 68 82 120 150 180 220 270 63 390 390 470 470 560 560 680 680 820 820 1,000 1,000 1,200 8.2 80 18 8×15 10×12.5 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 12.5×35 16×20 12.5×40 16×25 18×20 16×30 18×25 16×35 16×40 18×30 18×35 18×40 5×11.5 6.3×11.5 6.3×15 8×12 10×12.5 8×15 10×16 8×20 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 12.5×40 18×20 16×30 18×25 16×35 18×30 16×40 18×35 18×40 5×11.5 6.3×11.5 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.24 0.16 0.18 0.12 0.088 0.068 0.059 0.059 0.045 0.039 0.033 0.043 0.029 0.033 0.039 0.029 0.030 0.025 0.021 0.026 0.023 0.020 1.9 1.1 0.62 0.49 0.27 0.34 0.21 0.21 0.16 0.13 0.10 0.11 0.074 0.068 0.085 0.063 0.055 0.051 0.085 0.046 0.055 0.040 0.046 0.036 0.040 0.036 1.9 1.1 0.72 0.40 0.52 0.30 0.22 0.17 0.15 0.15 0.11 0.098 0.083 0.11 0.073 0.083 0.098 0.073 0.075 0.063 0.053 0.065 0.058 0.050 4.8 2.8 1.6 1.3 0.68 0.85 0.53 0.53 0.40 0.33 0.25 0.28 0.19 0.17 0.22 0.16 0.14 0.13 0.22 0.12 0.14 0.10 0.12 0.09 0.10 0.09 5.1 3.0 505 530 610 755 945 1,150 1,260 1,190 1,500 1,720 1,900 1,500 2,120 1,880 1,660 2,150 2,020 2,320 2,650 2,340 2,620 2,790 100 160 230 275 420 360 523 500 650 780 960 870 1,150 1,280 1,100 1,390 1,480 1,530 1,170 1,720 1,520 1,910 1,770 2,070 1,970 2,130 100 150 Part No. WV (Vdc) Cap (µF) Case size φD×L(mm) 20℃ ELXV500E□□820MH15D ELXV500E□□820MJC5S ELXV500E□□121MH20D ELXV500E□□121MJ16S ELXV500E□□181MJ20S ELXV500E□□221MJ25S ELXV500E□□331MJ30S ELXV500E□□331MK20S ELXV500E□□471MK25S ELXV500E□□561MK30S ELXV500E□□681MK35S ELXV500E□□681ML20S ELXV500E□□821MK40S ELXV500E□□821ML25S ELXV500E□□821MM20S ELXV500E□□102ML30S ELXV500E□□102MM25S ELXV500E□□122ML35S ELXV500E□□152ML40S ELXV500E□□152MM30S ELXV500E□□182MM35S ELXV500E□□222MM40S ELXV630E□□120MEB5D ELXV630E□□270MFB5D ELXV630E□□390MF15D ELXV630E□□470MH12D ELXV630E□□560MJC5S ELXV630E□□680MH15D ELXV630E□□680MJ16S ELXV630E□□820MH20D ELXV630E□□121MJ20S ELXV630E□□151MJ25S ELXV630E□□181MJ30S ELXV630E□□221MK20S ELXV630E□□271MK25S ELXV630E□□391MK30S ELXV630E□□391ML20S ELXV630E□□471MK35S ELXV630E□□471ML25S ELXV630E□□561MK40S ELXV630E□□561MM20S ELXV630E□□681ML30S ELXV630E□□681MM25S ELXV630E□□821ML35S ELXV630E□□821MM30S ELXV630E□□102ML40S ELXV630E□□102MM35S ELXV630E□□122MM40S ELXV800E□□8R2MEB5D ELXV800E□□180MFB5D 27 33 39 47 56 56 82 100 150 150 180 270 80 270 330 330 390 390 470 470 560 680 680 820 1,000 5.6 12 18 22 27 33 33 39 56 68 100 100 120 100 180 180 220 220 270 270 330 330 390 390 470 560 680 6.3×15 8×12 10×12.5 8×15 8×20 10×16 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 12.5×40 18×20 16×30 18×25 16×35 16×40 18×30 18×35 18×40 5×11.5 6.3×11.5 6.3×15 8×12 10×12.5 8×15 10×16 8×20 10×20 10×25 10×30 12.5×20 12.5×25 12.5×30 16×20 12.5×35 16×25 12.5×40 18×20 16×30 18×25 16×35 18×30 16×40 18×35 18×40 Rated ripple current (mArms/ -10℃ 105℃, 100kHz) Impedance (Ω max./100kHz) 0.62 0.53 0.47 0.35 0.27 0.33 0.26 0.19 0.15 0.15 0.11 0.094 0.11 0.087 0.081 0.060 0.085 0.058 0.070 0.052 0.041 0.058 0.052 0.041 1.9 1.1 0.62 0.53 0.47 0.35 0.33 0.27 0.26 0.19 0.15 0.15 0.11 0.094 0.11 0.087 0.081 0.060 0.085 0.058 0.070 0.052 0.058 0.041 0.052 0.041 1.7 1.5 1.3 0.97 0.74 0.90 0.70 0.52 0.41 0.41 0.30 0.26 0.30 0.24 0.22 0.17 0.23 0.16 0.19 0.14 0.11 0.16 0.14 0.11 5.1 3.0 1.7 1.5 1.3 0.97 0.90 0.74 0.70 0.52 0.41 0.41 0.30 0.26 0.30 0.24 0.22 0.17 0.23 0.16 0.19 0.14 0.16 0.11 0.14 0.11 220 275 380 360 490 500 620 795 955 890 1,040 1,270 1,240 1,450 1,440 1,610 1,450 1,790 1,650 2,000 2,200 1,850 1,990 2,370 100 150 220 275 380 360 500 490 620 795 955 890 1,040 1,270 1,240 1,450 1,440 1,610 1,450 1,790 1,650 2,000 1,850 2,200 1,990 2,370 Part No. ELXV800E□□270MF15D ELXV800E□□330MH12D ELXV800E□□390MJC5S ELXV800E□□470MH15D ELXV800E□□560MH20D ELXV800E□□560MJ16S ELXV800E□□820MJ20S ELXV800E□□101MJ25S ELXV800E□□151MJ30S ELXV800E□□151MK20S ELXV800E□□181MK25S ELXV800E□□271MK30S ELXV800E□□271ML20S ELXV800E□□331MK35S ELXV800E□□331ML25S ELXV800E□□391MK40S ELXV800E□□391MM20S ELXV800E□□471ML30S ELXV800E□□471MM25S ELXV800E□□561ML35S ELXV800E□□681ML40S ELXV800E□□681MM30S ELXV800E□□821MM35S ELXV800E□□102MM40S ELXV101E□□5R6MEB5D ELXV101E□□120MFB5D ELXV101E□□180MF15D ELXV101E□□220MH12D ELXV101E□□270MJC5S ELXV101E□□330MH15D ELXV101E□□330MJ16S ELXV101E□□390MH20D ELXV101E□□560MJ20S ELXV101E□□680MJ25S ELXV101E□□101MJ30S ELXV101E□□101MK20S ELXV101E□□121MK25S ELXV101E□□181MK30S ELXV101E□□181ML20S ELXV101E□□221MK35S ELXV101E□□221ML25S ELXV101E□□271MK40S ELXV101E□□271MM20S ELXV101E□□331ML30S ELXV101E□□331MM25S ELXV101E□□391ML35S ELXV101E□□391MM30S ELXV101E□□471ML40S ELXV101E□□561MM35S ELXV101E□□681MM40S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency (Hz) Frequency (Hz) Rated voltage Case size (Vdc) 120 1k 10k 100k φD (mm) 120 1k 10k 100k 5 to 8 0.65 0.83 0.95 1.00 5 to 8 0.40 0.66 0.85 1.00 10 & 12.5 0.70 0.85 0.96 1.00 35 & 50 10 & 12.5 0.50 0.73 0.89 1.00 16 & 18 0.85 0.92 0.97 1.00 16 & 18 0.60 0.81 0.94 1.00 5 to 8 0.55 0.76 0.91 1.00 5 to 8 0.20 0.55 0.80 1.00 10 & 12.5 0.65 0.83 0.93 1.00 63 to 100 10 & 12.5 0.35 0.65 0.85 1.00 16 & 18 0.70 0.87 0.96 1.00 16 & 18 0.50 0.75 0.90 1.00 Rated voltage Case size (Vdc) φD (mm) 6.3 & 10 16 & 25 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KXN 400 to 450Vdc, long life, 105℃ New! Series KXL Downsized KXN ・Ideal for low profile power supply applications ・Downsizing from KXL series ・Rated voltage range : 420, 450Vdc, Capacitance range : 15 to 270µF ・Endurance with ripple current : 10,000 to 12,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 420, 450Vdc (at 20℃, 120Hz) ±20% (M) I=0.04CV+100 (after 1 minute) I=0.02CV+25 (after 5 minutes) Where, I : Max. leakage current(µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃) Rated voltage (Vdc) 420, 450V tanδ (Max.) 0.24 (at 20℃, 120Hz) Rated voltage (Vdc) 420, 450V Z(-25℃)/Z(+20℃) 6 Z(-40℃)/Z(+20℃) 10 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 12,000 hours (10,000 hours for 20L and less) at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦500% of the initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] φD' φd Sleeve (PET : Brown) φ10 F±0.5 ●Terminal Code : E φD φd F φD' 15min. L' Vent 4min. L' (φ10) 10 0.6 5.0 12.5 16 18 0.6 0.8 0.8 5.0 7.5 7.5 φD+0.5 max. L+2.0 max. φD' φd Sleeve (PET : Brown) ≧φ12.5 F±0.5 Gas escape end seal L' Vent 15min. 4min. (φ12.5 to φ18) ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KXN AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 420V:421,450V:451) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 400 to 450Vdc, long life, 105℃ KXNSeries New! ◆STANDARD RATINGS WV (Vdc) Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 420 15 22 27 27 33 39 39 39 47 56 56 56 56 68 68 82 82 82 82 100 100 120 120 120 150 150 180 180 180 180 220 270 10×16 10×20 10×25 12.5×16 10×30 10×35 12.5×20 16×16 10×40 10×45 10×50 12.5×25 18×16 12.5×30 16×20 12.5×35 12.5×40 16×25 18×20 12.5×45 16×30 12.5×50 16×35 18×25 16×40 18×30 16×45 16×50 18×35 18×40 18×45 18×50 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 185 245 295 285 350 405 380 400 465 530 545 500 500 585 560 675 705 670 645 805 795 905 890 830 1,030 995 1,140 1,160 1,130 1,160 1,310 1,450 Part No. EKXN421E□□150MJ16S EKXN421E□□220MJ20S EKXN421E□□270MJ25S EKXN421E□□270MK16S EKXN421E□□330MJ30S EKXN421E□□390MJ35S EKXN421E□□390MK20S EKXN421E□□390ML16S EKXN421E□□470MJ40S EKXN421E□□560MJ45S EKXN421E□□560MJ50S EKXN421E□□560MK25S EKXN421E□□560MM16S EKXN421E□□680MK30S EKXN421E□□680ML20S EKXN421E□□820MK35S EKXN421E□□820MK40S EKXN421E□□820ML25S EKXN421E□□820MM20S EKXN421E□□101MK45S EKXN421E□□101ML30S EKXN421E□□121MK50S EKXN421E□□121ML35S EKXN421E□□121MM25S EKXN421E□□151ML40S EKXN421E□□151MM30S EKXN421E□□181ML45S EKXN421E□□181ML50S EKXN421E□□181MM35S EKXN421E□□181MM40S EKXN421E□□221MM45S EKXN421E□□271MM50S WV (Vdc) Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 450 15 18 22 27 33 33 39 39 47 47 47 47 56 56 56 68 82 82 82 82 100 100 100 120 120 120 150 150 180 180 180 220 10×16 10×20 12.5×16 10×25 10×30 12.5×20 10×35 16×16 10×40 10×45 12.5×25 18×16 10×50 12.5×30 16×20 12.5×35 12.5×40 12.5×45 16×25 18×20 12.5×50 16×30 18×25 16×35 16×40 18×30 16×45 18×35 16×50 18×40 18×45 18×50 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 185 220 255 295 360 350 410 400 465 485 455 455 545 530 510 615 705 725 670 645 825 795 760 890 920 890 1,040 1,030 1,160 1,160 1,180 1,310 Part No. EKXN451E□□150MJ16S EKXN451E□□180MJ20S EKXN451E□□220MK16S EKXN451E□□270MJ25S EKXN451E□□330MJ30S EKXN451E□□330MK20S EKXN451E□□390MJ35S EKXN451E□□390ML16S EKXN451E□□470MJ40S EKXN451E□□470MJ45S EKXN451E□□470MK25S EKXN451E□□470MM16S EKXN451E□□560MJ50S EKXN451E□□560MK30S EKXN451E□□560ML20S EKXN451E□□680MK35S EKXN451E□□820MK40S EKXN451E□□820MK45S EKXN451E□□820ML25S EKXN451E□□820MM20S EKXN451E□□101MK50S EKXN451E□□101ML30S EKXN451E□□101MM25S EKXN451E□□121ML35S EKXN451E□□121ML40S EKXN451E□□121MM30S EKXN451E□□151ML45S EKXN451E□□151MM35S EKXN451E□□181ML50S EKXN451E□□181MM40S EKXN451E□□181MM45S EKXN451E□□221MM50S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 15 to 82 100 to 270 120 1.00 1.00 1k 1.75 1.67 10k 2.25 2.05 100k 2.50 2.25 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KXL Series KXJ Downsized ・Ideal for low profile power supply applications ・Downsizing from KXJ series ・Rated voltage range : 400 to 450Vdc, Capacitance range : 15 to 150µF ・Endurance with ripple current : 10,000 to 12,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant 400 to 450Vdc, long life, 105℃ KXL Longer life KWA ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 400 to 450Vdc (at 20℃, 120Hz) ±20% (M) I=0.04CV+100 (after 1 minute) I=0.02CV+25 (after 5 minutes) Where, I : Max. leakage current(µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃) Rated voltage (Vdc) 400 to 450V tanδ (Max.) 0.24 (at 20℃, 120Hz) Rated voltage (Vdc) 400 to 450V Z(-25℃)/Z(+20℃) 6 Z(-40℃)/Z(+20℃) 10 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 12,000 hours (10,000 hours for 20L) at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦500% of the initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] φD' φd Sleeve (PET : Brown) φ10 F±0.5 ●Terminal Code : E φD φd F φD' 15min. L' Vent 4min. L' (φ10) 10 0.6 5.0 12.5 14.5 16 0.6 0.8 0.8 5.0 7.5 7.5 φD+0.5 max. L+2.0 max. 18 0.8 7.5 φD' φd Sleeve (PET : Brown) ≧φ12.5 F±0.5 Gas escape end seal L' Vent 15min. 4min. (φ12.5 to φ18) ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KXN AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 420V:421,450V:451) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 400 to 450Vdc, long life, 105℃ KXLSeries ◆STANDARD RATINGS WV (Vdc) 400 420 Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 18 22 27 33 39 39 39 47 56 56 56 56 68 68 68 68 82 82 100 100 100 100 120 120 120 150 15 22 27 27 33 33 33 39 47 47 47 56 56 56 68 68 68 68 82 82 82 82 100 100 100 120 120 10×20 10×25 12.5×20 10×30 10×35 12.5×25 14.5×20 10×40 10×45 12.5×30 14.5×25 16×20 12.5×35 14.5×30 16×25 18×20 12.5×40 14.5×35 12.5×50 14.5×40 16×30 18×25 14.5×45 16×35 18×30 18×35 10×20 10×25 10×30 12.5×20 10×35 12.5×25 14.5×20 10×40 10×45 12.5×30 16×20 10×50 12.5×35 14.5×25 12.5×40 14.5×30 16×25 18×20 12.5×45 14.5×35 16×30 18×25 12.5×50 14.5×40 16×35 16×40 18×30 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 220 250 300 340 390 390 370 440 500 495 495 480 570 585 570 530 650 670 760 760 720 710 840 810 840 930 195 250 300 300 350 350 350 400 460 440 430 520 510 490 580 560 560 540 660 660 650 640 750 720 730 840 800 Part No. EKXL401E□□180MJ20S EKXL401E□□220MJ25S EKXL401E□□270MK20S EKXL401E□□330MJ30S EKXL401E□□390MJ35S EKXL401E□□390MK25S EKXL401E□□390MU20S EKXL401E□□470MJ40S EKXL401E□□560MJ45S EKXL401E□□560MK30S EKXL401E□□560MU25S EKXL401E□□560ML20S EKXL401E□□680MK35S EKXL401E□□680MU30S EKXL401E□□680ML25S EKXL401E□□680MM20S EKXL401E□□820MK40S EKXL401E□□820MU35S EKXL401E□□101MK50S EKXL401E□□101MU40S EKXL401E□□101ML30S EKXL401E□□101MM25S EKXL401E□□121MU45S EKXL401E□□121ML35S EKXL401E□□121MM30S EKXL401E□□151MM35S EKXL421E□□150MJ20S EKXL421E□□220MJ25S EKXL421E□□270MJ30S EKXL421E□□270MK20S EKXL421E□□330MJ35S EKXL421E□□330MK25S EKXL421E□□330MU20S EKXL421E□□390MJ40S EKXL421E□□470MJ45S EKXL421E□□470MK30S EKXL421E□□470ML20S EKXL421E□□560MJ50S EKXL421E□□560MK35S EKXL421E□□560MU25S EKXL421E□□680MK40S EKXL421E□□680MU30S EKXL421E□□680ML25S EKXL421E□□680MM20S EKXL421E□□820MK45S EKXL421E□□820MU35S EKXL421E□□820ML30S EKXL421E□□820MM25S EKXL421E□□101MK50S EKXL421E□□101MU40S EKXL421E□□101ML35S EKXL421E□□121ML40S EKXL421E□□121MM30S WV (Vdc) Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 450 15 18 27 27 33 33 33 39 39 47 47 47 56 56 56 56 68 68 82 82 82 82 100 100 100 120 10×20 10×25 10×30 12.5×20 10×35 12.5×25 14.5×20 10×40 16×20 10×50 12.5×30 14.5×25 12.5×35 14.5×30 16×25 18×20 12.5×40 14.5×35 12.5×50 14.5×40 16×30 18×25 14.5×45 16×35 18×30 18×35 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 190 230 300 290 350 360 335 400 400 480 440 450 500 540 500 500 580 620 680 670 650 650 760 730 750 860 Part No. EKXL451E□□150MJ20S EKXL451E□□180MJ25S EKXL451E□□270MJ30S EKXL451E□□270MK20S EKXL451E□□330MJ35S EKXL451E□□330MK25S EKXL451E□□330MU20S EKXL451E□□390MJ40S EKXL451E□□390ML20S EKXL451E□□470MJ50S EKXL451E□□470MK30S EKXL451E□□470MU25S EKXL451E□□560MK35S EKXL451E□□560MU30S EKXL451E□□560ML25S EKXL451E□□560MM20S EKXL451E□□680MK40S EKXL451E□□680MU35S EKXL451E□□820MK50S EKXL451E□□820MU40S EKXL451E□□820ML30S EKXL451E□□820MM25S EKXL451E□□101MU45S EKXL451E□□101ML35S EKXL451E□□101MM30S EKXL451E□□121MM35S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 15 to 82 100 to 150 120 1.00 1.00 1k 1.75 1.67 10k 2.25 2.05 100k 2.50 2.25 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 160 to 500Vdc, long life, 105℃ KXJ Series KXJ ・Downsized and Longer life from current KXG series ・Endurance with ripple current : 8,000 to 12,000 hours at 105℃ ・Rated voltage range : 160 to 500V, Capacitance range : 6.8 to 680µF Downsized ・For electronic ballast circuits and other long life applications KXG ・Non solvent resistant type ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current –40 to +105℃ (160 to 450Vdc) -25 to +105℃ (500Vdc) 160 to 500Vdc ±20% (M) (at 20℃, 120Hz) After 1 minute After 5 minutes CV≦1000 I=0.1CV+40 I=0.03CV+15 CV>1000 I=0.04CV+100 I=0.02CV+25 Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃) Rated voltage (Vdc) 160 to 250V 350 to 500V tanδ (Max.) 0.20 0.24 (at 20℃, 120Hz) Rated voltage (Vdc) 160 to 250V 350, 400V 420 to 500V Z(－25℃)/Z(+20℃) 3 5 6 Z(－40℃)/Z(+20℃) 6 6 (at 120Hz) － The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied(the peak voltage shall not exceed the rated voltage) for the specified time at 105℃. Rated voltage (Vdc) 160 to 450V 500V Time 16L to 20L：10,000hours, 25L to 50L：12,000hours φ10：8,000hours, φ12.5 to φ18：10.000hours Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200％ of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦500% of the initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φD' φd Sleeve (PET : Brown) F±0.5 ●Terminal Code : E φD φd F φD' L' Vent 15min. 4min. (φ10) (φ12.5 to φ18) L' 10 0.6 5.0 12.5 14.5 16 0.6 0.8 0.8 5.0 7.5 7.5 φD+0.5max. L+1.5max. 18 0.8 7.5 Gas escaped end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KX J AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6.8µF:6R8,10µF:100,100µF:101) Lead forming·taping code T erminal code Voltage code (ex. 160V:161,400V:401) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 160 to 500Vdc, long life, 105℃ KXJSeries ◆STANDARD RATINGS WV (Vdc) 160 200 Cap (µF) Case size tanδ φD×L(mm) 39 56 82 82 100 120 120 150 150 150 180 180 180 180 220 220 220 270 270 270 270 330 330 330 330 390 390 470 470 470 470 470 560 560 680 680 27 47 56 68 82 100 100 100 120 120 120 120 150 150 150 180 180 180 220 220 220 220 270 270 270 270 270 330 330 330 390 390 470 470 470 560 10×16 10×20 10×25 10×30 12.5×20 10×35 14.5×20 10×40 10×45 12.5×25 10×50 12.5×30 14.5×25 16×20 12.5×35 16×25 18×20 12.5×40 12.5×45 14.5×31.5 14.5×35.5 12.5×50 14.5×40 16×31.5 18×25 14.5×45 16×35.5 14.5×50 16×40 16×45 18×31.5 18×35.5 16×50 18×40 18×45 18×50 10×16 10×20 10×25 10×30 12.5×20 10×35 12.5×25 14.5×20 10×40 10×45 12.5×30 16×20 10×50 12.5×35 14.5×25 14.5×31.5 16×25 18×20 12.5×40 12.5×45 14.5×35.5 18×25 12.5×50 14.5×40 14.5×45 16×31.5 16×35.5 14.5×50 16×40 18×31.5 16×45 18×35.5 16×50 18×40 18×45 18×50 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Rated ripple current (mArms/105℃, 120Hz) Part No. 245 315 415 445 575 570 675 665 695 765 785 885 890 855 1,040 1,020 990 1,190 1,230 1,170 1,210 1,400 1,385 1,350 1,290 1,545 1,500 1,735 1,700 1,730 1,660 1,715 1,920 1,905 2,130 2,145 200 290 345 405 520 520 625 615 595 620 725 695 720 860 810 955 925 895 1,075 1,110 1,095 1,050 1,265 1,250 1,290 1,220 1,250 1,450 1,425 1,395 1,575 1,565 1,755 1,745 1,770 1,945 EKXJ161E□□390MJ16S EKXJ161E□□560MJ20S EKXJ161E□□820MJ25S EKXJ161E□□820MJ30S EKXJ161E□□101MK20S EKXJ161E□□121MJ35S EKXJ161E□□121MU20S EKXJ161E□□151MJ40S EKXJ161E□□151MJ45S EKXJ161E□□151MK25S EKXJ161E□□181MJ50S EKXJ161E□□181MK30S EKXJ161E□□181MU25S EKXJ161E□□181ML20S EKXJ161E□□221MK35S EKXJ161E□□221ML25S EKXJ161E□□221MM20S EKXJ161E□□271MK40S EKXJ161E□□271MK45S EKXJ161E□□271MUN3S EKXJ161E□□271MUP1S EKXJ161E□□331MK50S EKXJ161E□□331MU40S EKXJ161E□□331MLN3S EKXJ161E□□331MM25S EKXJ161E□□391MU45S EKXJ161E□□391MLP1S EKXJ161E□□471MU50S EKXJ161E□□471ML40S EKXJ161E□□471ML45S EKXJ161E□□471MMN3S EKXJ161E□□471MMP1S EKXJ161E□□561ML50S EKXJ161E□□561MM40S EKXJ161E□□681MM45S EKXJ161E□□681MM50S EKXJ201E□□270MJ16S EKXJ201E□□470MJ20S EKXJ201E□□560MJ25S EKXJ201E□□680MJ30S EKXJ201E□□820MK20S EKXJ201E□□101MJ35S EKXJ201E□□101MK25S EKXJ201E□□101MU20S EKXJ201E□□121MJ40S EKXJ201E□□121MJ45S EKXJ201E□□121MK30S EKXJ201E□□121ML20S EKXJ201E□□151MJ50S EKXJ201E□□151MK35S EKXJ201E□□151MU25S EKXJ201E□□181MUN3S EKXJ201E□□181ML25S EKXJ201E□□181MM20S EKXJ201E□□221MK40S EKXJ201E□□221MK45S EKXJ201E□□221MUP1S EKXJ201E□□221MM25S EKXJ201E□□271MK50S EKXJ201E□□271MU40S EKXJ201E□□271MU45S EKXJ201E□□271MLN3S EKXJ201E□□271MLP1S EKXJ201E□□331MU50S EKXJ201E□□331ML40S EKXJ201E□□331MMN3S EKXJ201E□□391ML45S EKXJ201E□□391MMP1S EKXJ201E□□471ML50S EKXJ201E□□471MM40S EKXJ201E□□471MM45S EKXJ201E□□561MM50S WV (Vdc) 220 250 Cap (µF) Case size tanδ φD×L(mm) 27 39 56 56 68 82 82 100 100 100 120 120 120 120 150 150 150 180 180 180 220 220 220 220 220 270 270 270 270 330 330 330 390 390 390 470 22 33 47 47 56 68 68 82 82 82 100 100 100 100 120 120 120 150 150 150 180 180 180 180 180 220 220 220 220 270 270 270 330 330 330 390 10×16 10×20 10×25 10×30 12.5×20 10×35 14.5×20 10×40 10×45 12.5×25 10×50 12.5×30 14.5×25 16×20 12.5×35 16×25 18×20 12.5×40 12.5×45 14.5×31.5 12.5×50 14.5×35.5 14.5×40 16×31.5 18×25 14.5×45 14.5×50 16×35.5 18×31.5 16×40 16×45 18×35.5 16×50 18×40 18×45 18×50 10×16 10×20 10×25 10×30 12.5×20 10×35 14.5×20 10×40 10×45 12.5×25 10×50 12.5×30 14.5×25 16×20 12.5×35 16×25 18×20 12.5×40 12.5×45 14.5×31.5 12.5×50 14.5×35.5 14.5×40 16×31.5 18×25 14.5×45 14.5×50 16×35.5 18×31.5 16×40 16×45 18×35.5 16×50 18×40 18×45 18×50 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Rated ripple current (mArms/105℃, 120Hz) Part No. 200 265 345 370 475 470 555 545 565 625 645 725 725 695 860 845 815 975 1,005 955 1,145 1,095 1,130 1,100 1,050 1,285 1,315 1,245 1,260 1,425 1,450 1,440 1,600 1,590 1,620 1,785 185 240 315 340 430 430 505 495 515 565 585 660 665 635 770 755 730 890 920 870 1,035 990 1,020 995 950 1,160 1,185 1,125 1,135 1,285 1,310 1,300 1,475 1,460 1,485 1,625 EKXJ221E□□270MJ16S EKXJ221E□□390MJ20S EKXJ221E□□560MJ25S EKXJ221E□□560MJ30S EKXJ221E□□680MK20S EKXJ221E□□820MJ35S EKXJ221E□□820MU20S EKXJ221E□□101MJ40S EKXJ221E□□101MJ45S EKXJ221E□□101MK25S EKXJ221E□□121MJ50S EKXJ221E□□121MK30S EKXJ221E□□121MU25S EKXJ221E□□121ML20S EKXJ221E□□151MK35S EKXJ221E□□151ML25S EKXJ221E□□151MM20S EKXJ221E□□181MK40S EKXJ221E□□181MK45S EKXJ221E□□181MUN3S EKXJ221E□□221MK50S EKXJ221E□□221MUP1S EKXJ221E□□221MU40S EKXJ221E□□221MLN3S EKXJ221E□□221MM25S EKXJ221E□□271MU45S EKXJ221E□□271MU50S EKXJ221E□□271MLP1S EKXJ221E□□271MMN3S EKXJ221E□□331ML40S EKXJ221E□□331ML45S EKXJ221E□□331MMP1S EKXJ221E□□391ML50S EKXJ221E□□391MM40S EKXJ221E□□391MM45S EKXJ221E□□471MM50S EKXJ251E□□220MJ16S EKXJ251E□□330MJ20S EKXJ251E□□470MJ25S EKXJ251E□□470MJ30S EKXJ251E□□560MK20S EKXJ251E□□680MJ35S EKXJ251E□□680MU20S EKXJ251E□□820MJ40S EKXJ251E□□820MJ45S EKXJ251E□□820MK25S EKXJ251E□□101MJ50S EKXJ251E□□101MK30S EKXJ251E□□101MU25S EKXJ251E□□101ML20S EKXJ251E□□121MK35S EKXJ251E□□121ML25S EKXJ251E□□121MM20S EKXJ251E□□151MK40S EKXJ251E□□151MK45S EKXJ251E□□151MUN3S EKXJ251E□□181MK50S EKXJ251E□□181MUP1S EKXJ251E□□181MU40S EKXJ251E□□181MLN3S EKXJ251E□□181MM25S EKXJ251E□□221MU45S EKXJ251E□□221MU50S EKXJ251E□□221MLP1S EKXJ251E□□221MMN3S EKXJ251E□□271ML40S EKXJ251E□□271ML45S EKXJ251E□□271MMP1S EKXJ251E□□331ML50S EKXJ251E□□331MM40S EKXJ251E□□331MM45S EKXJ251E□□391MM50S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 160 to 500Vdc, long life, 105℃ KXJSeries ◆STANDARD RATINGS WV (Vdc) 350 400 Cap (µF) Case size tanδ φD×L(mm) 12 22 27 27 33 39 47 47 47 56 56 56 68 68 68 68 82 82 82 100 100 100 100 100 120 120 120 150 150 150 150 180 180 180 220 220 10 18 22 27 27 33 39 39 39 39 47 47 56 56 56 56 68 68 68 82 82 82 82 82 100 100 100 120 120 120 120 120 150 150 180 220 10×16 10×20 10×25 10×30 12.5×20 10×35 10×40 12.5×25 14.5×20 10×45 12.5×30 16×20 10×50 12.5×35 14.5×25 18×20 12.5×40 14.5×31.5 16×25 12.5×45 12.5×50 14.5×35.5 16×31.5 18×25 14.5×40 14.5×45 16×35.5 14.5×50 16×40 16×45 18×31.5 16×50 18×35.5 18×40 18×45 18×50 10×16 10×20 10×25 10×30 12.5×20 10×35 10×40 10×45 12.5×25 14.5×20 12.5×30 16×20 10×50 12.5×35 14.5×25 18×20 12.5×40 14.5×31.5 16×25 12.5×45 12.5×50 14.5×35.5 16×31.5 18×25 14.5×40 14.5×45 16×35.5 14.5×50 16×40 16×45 18×31.5 18×35.5 16×50 18×40 18×45 18×50 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 Rated ripple current (mArms/105℃, 120Hz) Part No. 135 200 240 255 330 325 375 425 420 425 495 475 485 580 545 550 655 645 625 750 770 740 740 710 835 860 830 980 960 975 940 1,090 1,065 1,080 1,210 1,220 125 180 215 255 300 300 340 355 390 385 455 435 440 525 495 500 600 585 570 680 700 670 670 640 760 785 760 875 860 875 840 870 995 985 1,095 1,220 EKXJ351E□□120MJ16S EKXJ351E□□220MJ20S EKXJ351E□□270MJ25S EKXJ351E□□270MJ30S EKXJ351E□□330MK20S EKXJ351E□□390MJ35S EKXJ351E□□470MJ40S EKXJ351E□□470MK25S EKXJ351E□□470MU20S EKXJ351E□□560MJ45S EKXJ351E□□560MK30S EKXJ351E□□560ML20S EKXJ351E□□680MJ50S EKXJ351E□□680MK35S EKXJ351E□□680MU25S EKXJ351E□□680MM20S EKXJ351E□□820MK40S EKXJ351E□□820MUN3S EKXJ351E□□820ML25S EKXJ351E□□101MK45S EKXJ351E□□101MK50S EKXJ351E□□101MUP1S EKXJ351E□□101MLN3S EKXJ351E□□101MM25S EKXJ351E□□121MU40S EKXJ351E□□121MU45S EKXJ351E□□121MLP1S EKXJ351E□□151MU50S EKXJ351E□□151ML40S EKXJ351E□□151ML45S EKXJ351E□□151MMN3S EKXJ351E□□181ML50S EKXJ351E□□181MMP1S EKXJ351E□□181MM40S EKXJ351E□□221MM45S EKXJ351E□□221MM50S EKXJ401E□□100MJ16S EKXJ401E□□180MJ20S EKXJ401E□□220MJ25S EKXJ401E□□270MJ30S EKXJ401E□□270MK20S EKXJ401E□□330MJ35S EKXJ401E□□390MJ40S EKXJ401E□□390MJ45S EKXJ401E□□390MK25S EKXJ401E□□390MU20S EKXJ401E□□470MK30S EKXJ401E□□470ML20S EKXJ401E□□560MJ50S EKXJ401E□□560MK35S EKXJ401E□□560MU25S EKXJ401E□□560MM20S EKXJ401E□□680MK40S EKXJ401E□□680MUN3S EKXJ401E□□680ML25S EKXJ401E□□820MK45S EKXJ401E□□820MK50S EKXJ401E□□820MUP1S EKXJ401E□□820MLN3S EKXJ401E□□820MM25S EKXJ401E□□101MU40S EKXJ401E□□101MU45S EKXJ401E□□101MLP1S EKXJ401E□□121MU50S EKXJ401E□□121ML40S EKXJ401E□□121ML45S EKXJ401E□□121MMN3S EKXJ401E□□121MMP1S EKXJ401E□□151ML50S EKXJ401E□□151MM40S EKXJ401E□□181MM45S EKXJ401E□□221MM50S WV (Vdc) 420 450 Cap (µF) Case size tanδ φD×L(mm) 6.8 12 15 18 22 27 27 27 27 33 33 33 39 39 47 47 47 56 56 56 68 68 68 68 68 82 82 82 100 100 100 100 120 120 120 150 6.8 12 15 18 18 22 27 27 27 27 33 33 33 39 39 39 47 47 47 56 56 56 56 68 68 68 68 82 82 82 82 100 100 120 120 150 10×16 10×20 10×25 10×30 12.5×20 10×35 10×40 12.5×25 14.5×20 10×45 12.5×30 16×20 10×50 14.5×25 12.5×35 16×25 18×20 12.5×40 12.5×45 14.5×31.5 12.5×50 14.5×35.5 14.5×40 16×31.5 18×25 14.5×45 16×35.5 18×31.5 14.5×50 16×40 16×45 18×35.5 16×50 18×40 18×45 18×50 10×16 10×20 10×25 10×30 12.5×20 10×35 10×40 10×45 12.5×25 14.5×20 12.5×30 14.5×25 16×20 10×50 12.5×35 18×20 12.5×40 14.5×31.5 16×25 12.5×45 14.5×35.5 16×31.5 18×25 12.5×50 14.5×40 14.5×45 16×35.5 14.5×50 16×40 16×45 18×31.5 16×50 18×35.5 18×40 18×45 18×50 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 Rated ripple current (mArms/105℃, 120Hz) Part No. 105 150 185 215 285 275 290 340 335 335 400 385 375 435 505 500 480 570 590 560 670 640 660 645 615 750 725 730 845 825 840 835 935 930 945 1,060 105 150 185 215 255 250 290 305 340 335 400 400 385 375 460 440 525 515 500 590 580 585 560 670 660 680 660 765 750 760 730 855 835 930 945 1,060 EKXJ421E□□6R8MJ16S EKXJ421E□□120MJ20S EKXJ421E□□150MJ25S EKXJ421E□□180MJ30S EKXJ421E□□220MK20S EKXJ421E□□270MJ35S EKXJ421E□□270MJ40S EKXJ421E□□270MK25S EKXJ421E□□270MU20S EKXJ421E□□330MJ45S EKXJ421E□□330MK30S EKXJ421E□□330ML20S EKXJ421E□□390MJ50S EKXJ421E□□390MU25S EKXJ421E□□470MK35S EKXJ421E□□470ML25S EKXJ421E□□470MM20S EKXJ421E□□560MK40S EKXJ421E□□560MK45S EKXJ421E□□560MUN3S EKXJ421E□□680MK50S EKXJ421E□□680MUP1S EKXJ421E□□680MU40S EKXJ421E□□680MLN3S EKXJ421E□□680MM25S EKXJ421E□□820MU45S EKXJ421E□□820MLP1S EKXJ421E□□820MMN3S EKXJ421E□□101MU50S EKXJ421E□□101ML40S EKXJ421E□□101ML45S EKXJ421E□□101MMP1S EKXJ421E□□121ML50S EKXJ421E□□121MM40S EKXJ421E□□121MM45S EKXJ421E□□151MM50S EKXJ451E□□6R8MJ16S EKXJ451E□□120MJ20S EKXJ451E□□150MJ25S EKXJ451E□□180MJ30S EKXJ451E□□180MK20S EKXJ451E□□220MJ35S EKXJ451E□□270MJ40S EKXJ451E□□270MJ45S EKXJ451E□□270MK25S EKXJ451E□□270MU20S EKXJ451E□□330MK30S EKXJ451E□□330MU25S EKXJ451E□□330ML20S EKXJ451E□□390MJ50S EKXJ451E□□390MK35S EKXJ451E□□390MM20S EKXJ451E□□470MK40S EKXJ451E□□470MUN3S EKXJ451E□□470ML25S EKXJ451E□□560MK45S EKXJ451E□□560MUP1S EKXJ451E□□560MLN3S EKXJ451E□□560MM25S EKXJ451E□□680MK50S EKXJ451E□□680MU40S EKXJ451E□□680MU45S EKXJ451E□□680MLP1S EKXJ451E□□820MU50S EKXJ451E□□820ML40S EKXJ451E□□820ML45S EKXJ451E□□820MMN3S EKXJ451E□□101ML50S EKXJ451E□□101MMP1S EKXJ451E□□121MM40S EKXJ451E□□121MM45S EKXJ451E□□151MM50S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 160 to 500Vdc, long life, 105℃ KXJSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size tanδ φD×L(mm) 500 6.8 8.2 10 12 15 15 15 18 18 22 22 27 33 39 10× 20 10× 25 10 ×30 12.5 ×20 10 ×35 10× 40 12.5 × 25 10× 45 12.5× 30 10× 50 12.5× 35 12.5 ×40 12.5 ×45 12.5× 50 Rated ripple current (mArms/105℃, 120Hz) Part No. 90 110 130 135 170 175 165 190 190 230 220 260 285 330 EKXJ501E□□6R8MJ20S EKXJ501E□□8R2MJ25S EKXJ501E□□100MJ30S EKXJ501E□□120MK20S EKXJ501E□□150MJ35S EKXJ501E□□150MJ40S EKXJ501E□□150MK25S EKXJ501E□□180MJ45S EKXJ501E□□180MK30S EKXJ501E□□220MJ50S EKXJ501E□□220MK35S EKXJ501E□□270MK40S EKXJ501E□□330MK45S EKXJ501E□□390MK50S 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers (160 to 450Vdc) Capacitance(µF) Frequency(Hz) 6.8 to 82 100 to 680 120 1.00 1.00 (500Vdc) 1k 1.75 1.67 10k 2.25 2.05 100k 2.50 2.25 Capacitance(µF) Frequency(Hz) 6.8 to 22 27 to 39 120 1.00 1.00 1k 1.78 1.75 10k 2.30 2.25 100k 2.59 2.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 160 to 450Vdc long life, 105℃ KXG Series KXJ Downsized ・For electronic ballast circuits and other long life applications ・Endurance with ripple current : 8,000 to 10,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant KXG ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ (160 to 400Vdc) -25 to+105℃ (450Vdc) 160 to 450Vdc ±20% (M) (at 20℃, 120Hz) After 1 minute After 5 minutes CV≦1,000 I=0.1CV+40 I=0.03CV+15 CV>1,000 I=0.04CV+100 I=0.02CV+25 Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃) Rated voltage (Vdc) 160 to 250V 350 to 450V tanδ (Max.) 0.20 0.24 (at 20℃, 120Hz) Rated voltage (Vdc) 160 to 250V 350 & 400V 450V Z(-25℃)/Z(+20℃) 3 5 6 Z(-40℃)/Z(+20℃) 6 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours (8,000 hours forφ10) at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦500% of the initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φD' φd Sleeve (PET : Brown) F±0.5 ● Terminal Code : E L' Vent 4min. 15min. (φ10) (φ12.5 to φ18) φD φd F φD' L' 10 0.6 5.0 18 12.5 16 0.6 0.8 0.8 5.0 7.5 7.5 φD+0.5max. L+1.5max. Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KXG AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6.8µF:6R8,10µF:100,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 160V:161,450V:451) Series code Category Please refer to "Product code guide (radial lead type)" ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 6.8 to 82 100 to 330 120 1.00 1.00 1k 1.75 1.67 10k 2.25 2.05 100k 2.50 2.25 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 160 to 450Vdc long life, 105℃ KXGSeries ◆STANDARD RATINGS WV (Vdc) 160 200 250 350 400 450 Cap (µF) Case size φD×L(mm) tanδ 10 22 33 47 68 82 100 100 150 220 330 10 22 33 47 68 82 100 150 220 330 10 22 33 47 68 82 100 150 220 6.8 10 22 33 47 68 68 82 100 120 150 6.8 10 15 22 33 47 47 68 82 100 120 150 6.8 10 15 22 33 33 47 68 82 100 10 × 16 10 × 20 10 × 20 10 × 20 12.5 × 20 12.5 × 20 12.5 × 25 16 × 20 16 × 20 16 × 25 18 × 31.5 10 × 16 10 × 20 10 × 20 12.5 × 20 12.5 × 20 16 × 20 16 × 20 16 × 25 18 × 25 18 × 35.5 10 × 20 10 × 20 12.5 × 20 12.5 × 20 16 × 20 16 × 20 16 × 25 18 × 25 18 × 31.5 10 × 16 10 × 20 12.5 × 20 16 × 20 16 × 20 16 × 25 18 × 20 18 × 25 18 × 25 18 × 31.5 18 × 35.5 10 × 16 10 × 20 12.5 × 20 12.5 × 20 16 × 20 16 × 25 18 × 20 18 × 25 18 × 25 18 × 31.5 18 × 35.5 18 × 40 10 × 20 12.5 × 20 12.5 × 25 16 × 20 16 × 25 18 × 20 18 × 25 18 × 31.5 18 × 35.5 18 × 40 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 Rated ripple current(mArms/105℃) 120Hz 100kHz 125 200 250 300 470 510 620 630 770 1,020 1,390 125 200 260 390 470 550 630 840 1,050 1,430 140 200 320 390 520 550 680 860 1,130 110 140 260 360 430 560 550 610 700 830 960 110 140 220 260 360 470 450 585 610 765 865 985 110 180 240 290 390 380 480 630 715 800 315 500 625 750 1,175 1,275 1,395 1,420 1,735 2,295 3,130 315 500 650 975 1,175 1,375 1,420 1,890 2,365 3,220 350 500 800 975 1,300 1,375 1,530 1,935 2,545 275 350 650 900 1,075 1,400 1,375 1,525 1,575 1,865 2,160 275 350 550 650 900 1,175 1,125 1,465 1,525 1,720 1,945 2,215 275 450 600 725 975 950 1,200 1,575 1,785 1,800 Part No. EKXG161E□□100MJ16S EKXG161E□□220MJ20S EKXG161E□□330MJ20S EKXG161E□□470MJ20S EKXG161E□□680MK20S EKXG161E□□820MK20S EKXG161E□□101MK25S EKXG161E□□101ML20S EKXG161E□□151ML20S EKXG161E□□221ML25S EKXG161E□□331MMN3S EKXG201E□□100MJ16S EKXG201E□□220MJ20S EKXG201E□□330MJ20S EKXG201E□□470MK20S EKXG201E□□680MK20S EKXG201E□□820ML20S EKXG201E□□101ML20S EKXG201E□□151ML25S EKXG201E□□221MM25S EKXG201E□□331MMP1S EKXG251E□□100MJ20S EKXG251E□□220MJ20S EKXG251E□□330MK20S EKXG251E□□470MK20S EKXG251E□□680ML20S EKXG251E□□820ML20S EKXG251E□□101ML25S EKXG251E□□151MM25S EKXG251E□□221MMN3S EKXG351E□□6R8MJ16S EKXG351E□□100MJ20S EKXG351E□□220MK20S EKXG351E□□330ML20S EKXG351E□□470ML20S EKXG351E□□680ML25S EKXG351E□□680MM20S EKXG351E□□820MM25S EKXG351E□□101MM25S EKXG351E□□121MMN3S EKXG351E□□151MMP1S EKXG401E□□6R8MJ16S EKXG401E□□100MJ20S EKXG401E□□150MK20S EKXG401E□□220MK20S EKXG401E□□330ML20S EKXG401E□□470ML25S EKXG401E□□470MM20S EKXG401E□□680MM25S EKXG401E□□820MM25S EKXG401E□□101MMN3S EKXG401E□□121MMP1S EKXG401E□□151MM40S EKXG451E□□6R8MJ20S EKXG451E□□100MK20S EKXG451E□□150MK25S EKXG451E□□220ML20S EKXG451E□□330ML25S EKXG451E□□330MM20S EKXG451E□□470MM25S EKXG451E□□680MMN3S EKXG451E□□820MMP1S EKXG451E□□101MM40S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 400 to 450Vdc, long life, 105℃ KWB Series ・Ideal for low profile power supply applications ・Downsized form KWA series ・Rated voltage range : 400 to 450Vdc, Capacitance range : 33 to 150µF ・Endurance with ripple current : 5,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant KWB Downsized KWA ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 400 to 450Vdc (at 20℃, 120Hz) ±20% (M) I=0.04CV+100 (after 1 minute) I=0.02CV+25 (after 5 minutes) Where, I : Max. leakage current(µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃) Rated voltage (Vdc) 400 to 450V tanδ (Max.) 0.20 (at 20℃, 120Hz) Rated voltage (Vdc) 400 to 450V Z(-25℃)/Z(+20℃) 6 Z(-40℃)/Z(+20℃) 10 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦500% of the initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] φD' φd Sleeve (PET : Brown) φ10 F±0.5 ●Terminal Code : E φD φd F φD' 15min. L' Vent 4min. L' (φ10) 10 0.6 5.0 12.5 14.5 16 0.6 0.8 0.8 5.0 7.5 7.5 φD+0.5 max. L+2.0 max. 18 0.8 7.5 φD' φd Sleeve (PET : Brown) ≧φ12.5 F±0.5 Gas escape end seal L' Vent 15min. 4min. (φ12.5 to φ18) ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E K WB A A A E A A A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 400V:401,450V:451) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.2 Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 400 to 450Vdc, long life, 105℃ KWBSeries ◆STANDARD RATINGS WV (Vdc) 400 420 450 Cap (µF) Case size φD×L(mm) tanδ Rated ripple current (mArms/105℃, 120Hz) 39 47 56 68 68 82 100 120 120 120 150 150 39 56 68 82 82 100 120 120 150 33 39 47 56 56 68 82 100 100 100 120 120 10 × 30 10 × 35 10 × 40 10 × 45 12.5 × 30 12.5 × 35 14.5 × 31.5 14.5 × 35 16 × 31.5 18 × 25 16 × 35 18 × 31.5 10 × 30 10 × 40 12.5 × 30 12.5 × 35 14.5 × 31.5 14.5 × 35 16 × 31.5 18 × 25 18 × 31.5 10 × 30 10 × 35 10 × 40 10 × 45 12.5 × 30 12.5 × 35 14.5 × 31.5 14.5 × 35 16 × 31.5 18 × 25 16 × 35 18 × 31.5 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 365 425 485 555 530 610 680 765 790 755 905 915 365 485 530 610 615 700 790 755 915 335 385 445 505 480 560 615 700 720 690 810 815 Part No. EKWB401E□□390MJ30S EKWB401E□□470MJ35S EKWB401E□□560MJ40S EKWB401E□□680MJ45S EKWB401E□□680MK30S EKWB401E□□820MK35S EKWB401E□□101MUN3S EKWB401E□□121MU35S EKWB401E□□121MLN3S EKWB401E□□121MM25S EKWB401E□□151ML35S EKWB401E□□151MMN3S EKWB421E□□390MJ30S EKWB421E□□560MJ40S EKWB421E□□680MK30S EKWB421E□□820MK35S EKWB421E□□820MUN3S EKWB421E□□101MU35S EKWB421E□□121MLN3S EKWB421E□□121MM25S EKWB421E□□151MMN3S EKWB451E□□330MJ30S EKWB451E□□390MJ35S EKWB451E□□470MJ40S EKWB451E□□560MJ45S EKWB451E□□560MK30S EKWB451E□□680MK35S EKWB451E□□820MUN3S EKWB451E□□101MU35S EKWB451E□□101MLN3S EKWB451E□□101MM25S EKWB451E□□121ML35S EKWB451E□□121MMN3S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 33 to 82 100 to 150 120 1.00 1.00 1k 1.50 1.30 10k 1.75 1.40 100k 1.80 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.2 Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 400 to 450Vdc, long life, 105℃ KWA Series ・Ideal for low profile power supply applications ・Longer life form KHE series ・Rated voltage range : 400 to 450Vdc, Capacitance range : 27 to 120µF ・Endurance with ripple current : 5,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant KWA Longer life KHE ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 400 to 450Vdc (at 20℃, 120Hz) ±20% (M) I=0.04CV+100 (after 1 minute) I=0.02CV+25 (after 5 minutes) Where, I : Max. leakage current(µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃) Rated voltage (Vdc) 400 to 450V tanδ (Max.) 0.20 (at 20℃, 120Hz) Rated voltage (Vdc) 400V 420V 450V Z(-25℃)/Z(+20℃) 5 6 6 Z(-40℃)/Z(+20℃) 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦500% of the initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] φD' φd Sleeve (PET : Brown) φ10 F±0.5 ●Terminal Code : E φD φd F φD' 15min. L' Vent 4min. L' (φ10) 10 0.6 5.0 12.5 14.5 16 0.6 0.8 0.8 5.0 7.5 7.5 φD+0.5 max. L+2.0 max. 18 0.8 7.5 φD' φd Sleeve (PET : Brown) ≧φ12.5 F±0.5 Gas escape end seal L' Vent 15min. 4min. (φ12.5 to φ18) ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E K WA A A A E A A A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 400V:401,450V:451) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 400 to 450Vdc, long life, 105℃ KWASeries ◆STANDARD RATINGS WV (Vdc) 400 420 Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 33 39 47 56 56 68 82 82 100 100 100 120 120 120 33 39 47 56 56 68 68 82 82 100 100 100 120 120 120 10×30 10×35 10×40 10×45 12.5×30 12.5×35 12.5×40 14.5×31.5 12.5×45 14.5×40 16×31.5 14.5×45 16×35 18×31.5 10×30 10×35 10×40 10×50 12.5×30 12.5×35 14.5×31.5 12.5×40 14.5×35 12.5×50 14.5×40 16×31.5 14.5×45 16×35 18×31.5 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 320 370 420 480 460 530 610 590 690 700 710 790 800 800 320 370 420 500 460 530 530 610 620 680 700 710 790 800 800 Part No. EKWA401E□□330MJ30S EKWA401E□□390MJ35S EKWA401E□□470MJ40S EKWA401E□□560MJ45S EKWA401E□□560MK30S EKWA401E□□680MK35S EKWA401E□□820MK40S EKWA401E□□820MUN3S EKWA401E□□101MK45S EKWA401E□□101MU40S EKWA401E□□101MLN3S EKWA401E□□121MU45S EKWA401E□□121ML35S EKWA401E□□121MMN3S EKWA421E□□330MJ30S EKWA421E□□390MJ35S EKWA421E□□470MJ40S EKWA421E□□560MJ50S EKWA421E□□560MK30S EKWA421E□□680MK35S EKWA421E□□680MUN3S EKWA421E□□820MK40S EKWA421E□□820MU35S EKWA421E□□101MK50S EKWA421E□□101MU40S EKWA421E□□101MLN3S EKWA421E□□121MU45S EKWA421E□□121ML35S EKWA421E□□121MMN3S WV (Vdc) Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 450 27 33 39 47 47 56 68 68 82 82 82 100 100 120 10×30 10×35 10×40 10×45 12.5×30 12.5×35 12.5×40 14.5×31.5 12.5×45 14.5×35 16×31.5 14.5×45 16×35 18×31.5 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 290 340 380 440 420 480 550 530 630 620 640 720 730 800 Part No. EKWA451E□□270MJ30S EKWA451E□□330MJ35S EKWA451E□□390MJ40S EKWA451E□□470MJ45S EKWA451E□□470MK30S EKWA451E□□560MK35S EKWA451E□□680MK40S EKWA451E□□680MUN3S EKWA451E□□820MK45S EKWA451E□□820MU35S EKWA451E□□820MLN3S EKWA451E□□101MU45S EKWA451E□□101ML35S EKWA451E□□121MMN3S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 27 to 82 100 to 120 120 1.00 1.00 1k 1.50 1.30 10k 1.75 1.40 100k 1.80 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KHF Series 400 to 450Vdc, Downsized, 105℃ KHF ・Ideal for low profile power supply applications ・Downsize, high ripple design ・Rated voltage range : 400 to 450Vdc, Capacitance range : 33 to 150µF ・Endurance with ripple current : 3,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant Downsized KHE ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 400 to 450Vdc ±20% (M) (at 20℃, 120Hz) After 1 minute After 5 minutes CV≦1,000 I=0.1CV+40 I=0.03CV+15 CV>1,000 I=0.04CV+100 I=0.02CV+25 Where, I : Max. leakage current(µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃) Rated voltage (Vdc) 400 to 450V tanδ (Max.) 0.20 (at 20℃, 120Hz) Rated voltage (Vdc) 400 to 450V Z(-25℃)/Z(+20℃) 6 Z(-40℃)/Z(+20℃) 10 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 3,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦500% of the initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] φD' φd Sleeve (PET : Brown) φ10 F±0.5 ●Terminal Code : E φD φd F φD' 15min. L' Vent 4min. L' (φ10) 10 0.6 5.0 12.5 14.5 16 0.6 0.8 0.8 5.0 7.5 7.5 φD+0.5 max. L+2.0 max. 18 0.8 7.5 φD' φd Sleeve (PET : Brown) ≧φ12.5 F±0.5 Gas escape end seal L' Vent 15min. 4min. (φ12.5 to φ18) ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KHF AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 68µF:680,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 400V:401,450V:451) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.2 Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 400 to 450Vdc, Downsized, 105℃ KHFSeries ◆STANDARD RATINGS WV (Vdc) 400 420 450 Cap (µF) Case size φD×L(mm) tanδ Rated ripple current (mArms/105℃, 120Hz) 39 47 56 68 68 82 100 100 120 120 120 120 150 150 150 39 56 68 82 82 100 100 120 120 120 150 150 33 39 47 56 56 68 82 82 100 100 100 100 120 120 150 10 × 30 10 × 35 10 × 40 10 × 45 12.5 × 30 12.5 × 35 12.5 × 40 14.5 × 31.5 12.5 × 45 14.5 × 35 16 × 31.5 18 × 25 14.5 × 45 16 × 35 18 × 31.5 10 × 30 10 × 40 12.5 × 30 12.5 × 35 14.5 × 31.5 12.5 × 40 14.5 × 35 14.5 × 40 16 × 31.5 18 × 25 14.5 × 45 18 × 31.5 10 × 30 10 × 35 10 × 40 10 × 45 12.5 × 30 12.5 × 35 12.5 × 40 14.5 × 31.5 12.5 × 45 14.5 × 35 16 × 31.5 18 × 25 14.5 × 40 16 × 35 18 × 31.5 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 365 425 485 555 530 610 705 680 800 765 790 755 905 905 915 365 485 530 610 615 705 700 810 790 755 905 915 335 385 445 505 480 560 640 615 730 700 720 690 810 810 915 Part No. EKHF401E□□390MJ30S EKHF401E□□470MJ35S EKHF401E□□560MJ40S EKHF401E□□680MJ45S EKHF401E□□680MK30S EKHF401E□□820MK35S EKHF401E□□101MK40S EKHF401E□□101MUN3S EKHF401E□□121MK45S EKHF401E□□121MU35S EKHF401E□□121MLN3S EKHF401E□□121MM25S EKHF401E□□151MU45S EKHF401E□□151ML35S EKHF401E□□151MMN3S EKHF421E□□390MJ30S EKHF421E□□560MJ40S EKHF421E□□680MK30S EKHF421E□□820MK35S EKHF421E□□820MUN3S EKHF421E□□101MK40S EKHF421E□□101MU35S EKHF421E□□121MU40S EKHF421E□□121MLN3S EKHF421E□□121MM25S EKHF421E□□151MU45S EKHF421E□□151MMN3S EKHF451E□□330MJ30S EKHF451E□□390MJ35S EKHF451E□□470MJ40S EKHF451E□□560MJ45S EKHF451E□□560MK30S EKHF451E□□680MK35S EKHF451E□□820MK40S EKHF451E□□820MUN3S EKHF451E□□101MK45S EKHF451E□□101MU35S EKHF451E□□101MLN3S EKHF451E□□101MM25S EKHF451E□□121MU40S EKHF451E□□121ML35S EKHF451E□□151MMN3S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 33 to 82 100 to 150 120 1.00 1.00 1k 1.50 1.30 10k 1.75 1.40 100k 1.80 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.2 Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KHE Series 400 to 450Vdc, Downsized, 105℃ KHE ・Ideal for low profile power supply applications ・Downsize, high ripple design ・Rated voltage range : 400 to 450Vdc, Capacitance range : 27 to 120µF ・Endurance with ripple current : 2,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant Downsized PAG ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 400 to 450Vdc ±20% (M) (at 20℃, 120Hz) After 1 minute After 5 minutes CV≦1,000 I=0.1CV+40 I=0.03CV+15 CV>1,000 I=0.04CV+100 I=0.02CV+25 Where, I : Max. leakage current(µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃) Rated voltage (Vdc) 400V 420V 450V tanδ (Max.) 0.15 0.20 0.20 (at 20℃, 120Hz) Rated voltage (Vdc) 400V 420V 450V Z(-25℃)/Z(+20℃) 5 6 6 Z(-40℃)/Z(+20℃) 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦500% of the initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] φD' φd Sleeve (PET : Brown) φ10 F±0.5 ●Terminal Code : E φD φd F φD' 15min. L' Vent 4min. L' (φ10) 10 0.6 5.0 12.5 14.5 16 0.6 0.8 0.8 5.0 7.5 7.5 φD+0.5 max. L+2.0 max. 18 0.8 7.5 φD' φd Sleeve (PET : Brown) ≧φ12.5 F±0.5 Gas escape end seal L' Vent 15min. 4min. (φ12.5 to φ18) ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KHE AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 400V:401,450V:451) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 400 to 450Vdc, Downsized, 105℃ KHESeries ◆STANDARD RATINGS WV (Vdc) 400 420 Cap (µF) Rated ripple Case size current tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 33 39 47 56 56 68 82 82 100 100 100 120 120 120 33 39 47 56 56 68 82 82 100 100 100 120 120 120 10×30 10×35 10×40 10×45 12.5×30 12.5×35 12.5×40 14.5×31.5 12.5×45 14.5×35 16×31.5 14.5×40 16×35 18×31.5 10×30 10×35 10×40 10×50 12.5×30 12.5×35 12.5×40 14.5×31.5 12.5×50 14.5×40 16×31.5 14.5×45 16×35 18×31.5 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 335 385 445 505 480 560 640 625 730 715 720 810 810 815 335 385 445 520 480 560 640 625 750 740 720 835 810 815 Part No. EKHE401E□□330MJ30S EKHE401E□□390MJ35S EKHE401E□□470MJ40S EKHE401E□□560MJ45S EKHE401E□□560MK30S EKHE401E□□680MK35S EKHE401E□□820MK40S EKHE401E□□820MUN3S EKHE401E□□101MK45S EKHE401E□□101MU35S EKHE401E□□101MLN3S EKHE401E□□121MU40S EKHE401E□□121ML35S EKHE401E□□121MMN3S EKHE421E□□330MJ30S EKHE421E□□390MJ35S EKHE421E□□470MJ40S EKHE421E□□560MJ50S EKHE421E□□560MK30S EKHE421E□□680MK35S EKHE421E□□820MK40S EKHE421E□□820MUN3S EKHE421E□□101MK50S EKHE421E□□101MU40S EKHE421E□□101MLN3S EKHE421E□□121MU45S EKHE421E□□121ML35S EKHE421E□□121MMN3S WV (Vdc) Cap (µF) Rated ripple Case size current tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 450 27 33 39 47 47 56 68 68 82 82 82 100 100 120 10×30 10×35 10×40 10×45 12.5×30 12.5×35 12.5×40 14.5×31.5 12.5×45 14.5×35 16×31.5 14.5×40 16×35 18×31.5 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 305 355 405 460 440 505 580 570 660 650 655 740 740 815 Part No. EKHE451E□□270MJ30S EKHE451E□□330MJ35S EKHE451E□□390MJ40S EKHE451E□□470MJ45S EKHE451E□□470MK30S EKHE451E□□560MK35S EKHE451E□□680MK40S EKHE451E□□680MUN3S EKHE451E□□820MK45S EKHE451E□□820MU35S EKHE451E□□820MLN3S EKHE451E□□101MU40S EKHE451E□□101ML35S EKHE451E□□121MMN3S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 27 to 82 100 to 120 120 1.00 1.00 1k 1.50 1.30 10k 1.75 1.40 100k 1.80 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS PAG Series 200 to 450Vdc, Downsized, 105℃ PAG ・Downsize, high ripple design (φ10 to 18) ・Rated voltage range : 200 to 450Vdc, Capacitance range : 18 to 560µF ・Endurance with ripple current : 2,000 hours at 105℃ ・Ideal for low profile power supply applications ・Non solvent resistant type ・RoHS2 Compliant Downsized Higher ripple KMG ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ (200, 400Vdc) -25 to+105℃ (420, 450Vdc) 200 to 450Vdc ±20% (M) (at 20℃, 120Hz)℃ After 1 minute After 5 minutes CV≦1,000 I=0.1CV+40 I=0.03CV+15 CV>1,000 I=0.04CV+100 I=0.02CV+25 Where, I : Max. leakage current(µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃)℃ Rated voltage (Vdc) 200V 400V 420V 450V tanδ (Max.) 0.12 0.15 0.20 0.20 (at 20℃, 120Hz)℃ Rated voltage (Vdc) 200V 400V 420V 450V Z(-25℃)/Z(+20℃) 3 5 6 6 Z(-40℃)/Z(+20℃) 6 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦500% of the initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φD' φd Sleeve (PET : Brown) φ10 & φ12.5 F±0.5 ●Terminal Code : E φD φd F φD' 15min. L' Vent 4min. (φ10) (φ12.5) L' 10 0.6 5.0 12.5 14.5 16 0.6 0.8 0.8 5.0 7.5 7.5 φD+0.5 max. L+2.0 max. 18 0.8 7.5 φD' φd Sleeve (PET : Brown) ≧φ14.5 F±0.5 Gas escape end seal L' Vent 15min. 4min. (φ14.5 to φ18) ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E P AG AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 22µF:220,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 200V:201,450V:451) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 200 to 450Vdc, Downsized, 105℃ PAGSeries ◆STANDARD RATINGS WV (Vdc) 200 400 Cap (µF) Rated ripple Case size current tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 82 100 120 150 180 220 220 270 270 330 330 390 390 470 560 27 33 39 47 56 68 68 82 100 100 120 120 150 150 180 220 10×30 10×35 10×40 12.5×30 12.5×35 12.5×40 14.5×30 14.5×35 16×30 16×35 18×30 16×40 18×35 18×40 18×45 10×30 10×35 10×40 12.5×30 12.5×35 12.5×40 14.5×30 14.5×35 14.5×40 16×30 16×35 18×30 16×40 18×35 18×40 18×45 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 440 510 590 650 750 830 830 960 960 1,100 1,100 1,240 1,240 1,390 1,560 260 300 340 370 420 480 480 530 580 580 670 670 770 770 880 1,000 Part No. EPAG201E□□820MJ30S EPAG201E□□101MJ35S EPAG201E□□121MJ40S EPAG201E□□151MK30S EPAG201E□□181MK35S EPAG201E□□221MK40S EPAG201E□□221MU30S EPAG201E□□271MU35S EPAG201E□□271ML30S EPAG201E□□331ML35S EPAG201E□□331MM30S EPAG201E□□391ML40S EPAG201E□□391MM35S EPAG201E□□471MM40S EPAG201E□□561MM45S EPAG401E□□270MJ30S EPAG401E□□330MJ35S EPAG401E□□390MJ40S EPAG401E□□470MK30S EPAG401E□□560MK35S EPAG401E□□680MK40S EPAG401E□□680MU30S EPAG401E□□820MU35S EPAG401E□□101MU40S EPAG401E□□101ML30S EPAG401E□□121ML35S EPAG401E□□121MM30S EPAG401E□□151ML40S EPAG401E□□151MM35S EPAG401E□□181MM40S EPAG401E□□221MM45S WV (Vdc) 420 450 Cap (µF) Rated ripple Case size current tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 22 27 33 39 47 56 56 68 68 82 82 100 100 120 150 18 22 27 33 39 47 47 56 56 68 68 82 82 100 120 150 10×30 10×35 10×40 12.5×30 12.5×35 12.5×40 14.5×30 14.5×35 16×30 14.5×40 16×35 16×40 18×30 18×35 18×40 10×30 10×35 10×40 12.5×30 12.5×35 12.5×40 14.5×30 14.5×35 16×30 14.5×40 16×35 16×40 18×30 18×35 18×40 18×45 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 230 270 310 330 390 430 430 510 510 570 570 610 610 690 790 210 240 280 310 350 390 390 440 440 500 500 550 550 650 740 810 Part No. EPAG421E□□220MJ30S EPAG421E□□270MJ35S EPAG421E□□330MJ40S EPAG421E□□390MK30S EPAG421E□□470MK35S EPAG421E□□560MK40S EPAG421E□□560MU30S EPAG421E□□680MU35S EPAG421E□□680ML30S EPAG421E□□820MU40S EPAG421E□□820ML35S EPAG421E□□101ML40S EPAG421E□□101MM30S EPAG421E□□121MM35S EPAG421E□□151MM40S EPAG451E□□180MJ30S EPAG451E□□220MJ35S EPAG451E□□270MJ40S EPAG451E□□330MK30S EPAG451E□□390MK35S EPAG451E□□470MK40S EPAG451E□□470MU30S EPAG451E□□560MU35S EPAG451E□□560ML30S EPAG451E□□680MU40S EPAG451E□□680ML35S EPAG451E□□820ML40S EPAG451E□□820MM30S EPAG451E□□101MM35S EPAG451E□□121MM40S EPAG451E□□151MM45S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 18 to 82 100 to 560 120 1.00 1.00 1k 1.50 1.30 10k 1.75 1.40 100k 1.80 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KLJ Series rk with a p s 't n Does r voltage! DC ove ・Doesn't spark with DC over voltage ・Endurance with ripple current : 2,000 hours at 105℃ ・Non solvent resistant type ・ESR value prescribed ・RoHS2 Compliant Overvoltage resistant design, 105℃ KLJ Downsized KLG ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105℃ 200 to 450Vdc ±20% (M) I=0.04CV+100 Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 200V 400V 450V tanδ (Max.) 0.20 0.24 0.24 Rated voltage (Vdc) 200V 400V 450V Z(-25℃)/Z(+20℃) 4 6 6 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 1 minute) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦500% of the initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φD' φd Sleeve (PET : Brown) F±0.5 ●Terminal Code : E L' 15min. 4min. (φ10) Vent (φ12.5 to φ18) Gas escape end seal φD φd F φD' L' 10 0.6 5.0 18 12.5 16 0.6 0.8 0.8 5.0 7.5 7.5 φD+0.5max. L+1.5max. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KL J 2 0 1 E LL 1 0 1 M L 2 0 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7µF:4R7,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 200V:201,450V:451) Series code Category Please refer to "Product code guide (radial lead type)" ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 4.7 to 10µF 15 to 47µF 56 to 330µF 120 1.00 1.00 1.00 300 1.35 1.25 1.15 1k 1.75 1.50 1.30 10k 2.30 1.75 1.40 50k 2.50 1.80 1.50 100k 2.70 1.85 1.60 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Overvoltage resistant design, 105℃ KLJSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) 200 400 450 33 39 56 82 100 120 150 180 180 220 220 270 330 4.7 10 15 18 22 27 33 39 39 47 47 56 68 68 82 82 100 120 39 39 47 47 56 68 68 82 82 100 110 120 Case size φD×L(mm) tanδ ESR (Ωmax/20℃, 100kHz) Rated ripple current (mArms/105℃, 120Hz) Part No. 10×20 10×25 12.5×20 12.5×25 16× 20 16× 25 18× 20 16× 31.5 18× 25 16× 35.5 18× 31.5 18× 35.5 18× 40 10×12.5 10×16 10× 20 10× 25 12.5× 20 12.5× 25 16× 20 18× 20 18× 25 16× 25 18× 20 16× 31.5 16× 35.5 18× 25 16× 40 18× 31.5 18× 35.5 18× 40 16×25 18× 20 16× 25 18× 25 16× 31.5 16× 35.5 18×31.5 16× 40 18× 31.5 18×40 18×40 18×45 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 1.8 1.4 1.0 0.72 0.63 0.44 0.31 0.36 0.30 0.30 0.28 0.24 0.21 8.4 5.7 4.0 3.2 2.7 1.9 1.5 1.2 0.72 1.1 1.2 0.84 0.72 0.88 0.65 0.64 0.54 0.49 1.4 1.4 1.3 1.2 1.1 0.86 0.91 0.79 0.78 0.67 0.59 0.58 165 200 265 350 390 465 505 615 585 695 700 805 900 36 64 105 110 165 200 225 255 270 290 280 340 385 360 435 425 490 540 265 255 290 320 340 420 390 435 425 490 540 570 EKLJ201E□□330MJ20S EKLJ201E□□390MJ25S EKLJ201E□□560MK20S EKLJ201E□□820MK25S EKLJ201E□□101ML20S EKLJ201E□□121ML25S EKLJ201E□□151MM20S EKLJ201E□□181MLN3S EKLJ201E□□181MM25S EKLJ201E□□221MLP1S EKLJ201E□□221MMN3S EKLJ201E□□271MMP1S EKLJ201E□□331MM40S EKLJ401E□□4R7MJC5S EKLJ401E□□100MJ16S EKLJ401E□□150MJ20S EKLJ401E□□180MJ25S EKLJ401E□□220MK20S EKLJ401E□□270MK25S EKLJ401E□□330ML20S EKLJ401E□□390MM20S EKLJ401E□□390MM25S EKLJ401E□□470ML25S EKLJ401E□□470MM20S EKLJ401E□□560MLN3S EKLJ401E□□680MLP1S EKLJ401E□□680MM25S EKLJ401E□□820ML40S EKLJ401E□□820MMN3S EKLJ401E□□101MMP1S EKLJ401E□□121MM40S EKLJ451E□□390ML25S EKLJ451E□□390MM20S EKLJ451E□□470ML25S EKLJ451E□□470MM25S EKLJ451E□□560MLN3S EKLJ451E□□680MLP1S EKLJ451E□□680MMN3S EKLJ451E□□820ML40S EKLJ451E□□820MMN3S EKLJ451E□□101MM40S EKLJ451E□□111MM40S EKLJ451E□□121MM45S □□ : Enter the appropriate lead forming or taping code. ◆DC OVERVOLTAGE TEST CONDITIONS The vent will operate and the capacitor shall become an open circuit without burning materials when the following excess DC voltage is applied. ●Test DC voltage Rated voltage 200Vdc 400Vdc 450Vdc ●Test circuit Nominal capacitance ＜330µF 330µF ＜100µF 100µF≦C≦120µF Current limit 4A 5A 2A 4A ＜100µF 100µF≦C≦120µF 2A 4A Test DC voltage 300/375Vdc + AC input SW CX – 500/600Vdc Constant DC voltage/current power supply 550/675Vdc Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KXF 160 to 450Vdc long life, 105℃ Series KXF ・For LED light circuits and other long life applications ・Rated voltage range : 160 to 450 Vdc , Capacitance range : 5.6 to 68µF ・Endurance with ripple current : 15,000 to 20,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant Longer life KXE ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 160 to 450Vdc (at 20℃, 120Hz) ±20% (M) After 1 minute After 5 minutes I=0.04CV+100 I=0.02CV+25 Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃) Rated voltage (Vdc) 160 to 450V tanδ (Max.) 0.24 (at 20℃, 120Hz) Rated voltage (Vdc) 160 to 250V 400，450V Z(-25℃)/Z(+20℃) 3 6 Z(-40℃)/Z(+20℃) 8 10 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 20,000 hours (15,000 hours forφ10×12.5L) at 105℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦500% of the initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φD' φd Sleeve (PET : Brown) F±0.5 ● Terminal Code : E L' Vent 4min. 15min. (φ10) (φ12.5 to φ18) φD φd F φD' L' 10 0.6 5.0 18 12.5 16 0.6 0.8 0.8 5.0 7.5 7.5 φD+0.5max. L+1.5max. Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 E KXF 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6.8µF:6R8, 33µF:330) Lead forming·taping code Terminal code Voltage code (ex. 160V:161, 400V:401) Series code Category Please refer to "Product code guide (radial lead type)" ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 5.6 〜 68 120 1.00 1k 1.75 10k 2.25 100k 2.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 160 to 450Vdc long life, 105℃ KXFSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size φD×L(mm) tanδ Rated ripple current (mArms/105℃, 120Hz) Part No. 160 22 33 10× 12.5 10× 16 0.24 0.24 121 158 EKXF161E□□220MJC5S EKXF161E□□330MJ16S 18 27 10 12 18 5.6 8.2 6.8 8.2 10 15 22 27 33 33 47 68 10× 12.5 10× 16 10× 12.5 10× 12.5 10× 16 10×12.5 10× 16 10 ×16 10× 16 10× 20 12.5× 20 12.5×25 16× 20 16× 25 18× 20 18× 25 18× 31.5 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 113 149 90 97 129 64 88 62 88 92 140 240 305 392 312 480 520 EKXF201E□□180MJC5S EKXF201E□□270MJ16S EKXF251E□□100MJC5S EKXF251E□□120MJC5S EKXF251E□□180MJ16S EKXF401E□□5R6MJC5S EKXF401E□□8R2MJ16S EKXF451E□□6R8MJ16S EKXF451E□□8R2MJ16S EKXF451E□□100MJ20S EKXF451E□□150MK20S EKXF451E□□220MK25S EKXF451E□□270ML20S EKXF451E□□330ML25S EKXF451E□□330MM20S EKXF451E□□470MM25S EKXF451E□□680MMN3S 200 250 400 450 □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS KXE 160 to 400Vdc long life, 105℃ Series KXF ・For LED light circuits and other long life applications ・Rated voltage range : 160 to 400 Vdc , Capacitance range : 1.0 to 33µF ・Endurance with ripple current : 10,000 to 12,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant Longer life KXE ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 160 to 400Vdc ±20% (M) (at 20℃, 120Hz) After 1 minute After 5 minutes CV≦1,000 I=0.1CV+40 I=0.03CV+15 CV>1,000 I=0.04CV+100 I=0.02CV+25 Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃) Rated voltage (Vdc) 160 to 400V tanδ (Max.) 0.24 (at 20℃, 120Hz) Rated voltage (Vdc) 160 to 400V Z(-25℃)/Z(+20℃) 4 Z(-40℃)/Z(+20℃) 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours (12,000 hours forφ10×16L) at 105℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦500% of the initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] φD' φd Sleeve (PET : Brown) F±0.5 ● Terminal Code : E L' Vent 4min. 15min. (φ8 &φ10) φD φd F φD' L' 8 0.6 3.5 10 0.6 5.0 φD+0.5max. L+1.5max. L+2.0max. Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KXE AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 3.3µF:3R3,33µF:330) Lead forming·taping code Terminal code Voltage code (ex. 160V:161,400V:401) Series code Category Please refer to "Product code guide (radial lead type)" ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 1.0 to 33 120 1.00 1k 1.75 10k 2.25 100k 2.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 160 to 400Vdc long life, 105℃ KXESeries ◆STANDARD RATINGS WV (Vdc) 160 200 250 400 Cap (µF) Case size φD×L(mm) tanδ 10 15 8×11.5 8×15 15 22 27 33 10 12 12 15 18 27 6.8 10 1.0 2.2 2.7 3.3 3.3 3.9 4.7 5.6 6.8 6.8 10×12.5 10×12.5 10×16 10 ×16 8×11.5 8×15 10 ×12.5 10 ×16 10 ×12.5 10 ×16 8× 11.5 8×15 8 × 11.5 8 ×11.5 8 ×11.5 8 ×11.5 10 ×12.5 8 ×15 10 ×16 10 ×16 10×12.5 10× 16 Rated ripple current(mArms/105℃) Part No. 120Hz 100kHz 0.24 0.24 55 75 137 187 EKXE161E□□100MHB5D EKXE161E□□150MH15D 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 80 95 105 130 55 70 70 90 85 120 45 60 25 40 45 50 60 65 90 100 85 115 200 237 262 325 137 175 175 225 212 300 112 150 62 100 112 125 150 162 225 250 212 287 EKXE161E□□150MJC5S EKXE161E□□220MJC5S EKXE161E□□270MJ16S EKXE161E□□330MJ16S EKXE201E□□100MHB5D EKXE201E□□120MH15D EKXE201E□□120MJC5S EKXE201E□□150MJ16S EKXE201E□□180MJC5S EKXE201E□□270MJ16S EKXE251E□□6R8MHB5D EKXE251E□□100MH15D EKXE401E□□1R0MHB5D EKXE401E□□2R2MHB5D EKXE401E□□2R7MHB5D EKXE401E□□3R3MHB5D EKXE401E□□3R3MJC5S EKXE401E□□3R9MH15D EKXE401E□□4R7MJ16S EKXE401E□□5R6MJ16S EKXE401E□□6R8MJC5S EKXE401E□□6R8MJ16S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life forφ5 toφ8 product, 105℃ LE Series ・Suitable for long life products ・Downsize and long life ・Endurance with ripple current：10,000 hours at 105℃ ・Case size range：φ5×11L to φ8×11.5L ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ◆SPECIFICATION Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 10 to 100Vdc ±20% (M) I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 100V tanδ (Max.) 0.45 0.35 0.30 0.22 0.19 0.17 0.15 Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 100V Z(-25℃)/Z(20℃) 8 6 4 4 3 3 3 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃,120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours at 105℃. Capacitance change ≦±25％ of the initial value D.F. (tanδ) ≦300％ of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±25% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] φd Sleeve (PET : Brown) F±0.5 ●Terminal Code : E φD φd φD' F φD' L' L' 15min. 5 0.5 2.0 8 6.3 0.6 0.5 3.5 2.5 φD+0.5max. L+1.5max. 4min. Gas escape end seal Vent (Except φ5) ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L E－ AAA E AA AAA M AAA D Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7µF:4R7, 10µF:100,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 16V:160, 100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life forφ5 toφ8 product, 105℃ LESeries ◆STANDARD RATINGS WV (Vdc) 10 16 25 35 50 63 100 Cap (µF) Case size φD×L(mm) tanδ Rated ripple current (mArms/105℃, 100kHz) Part No. 100 220 330 47 100 220 33 47 100 33 47 100 1.0 2.2 3.3 4.7 10 22 33 47 100 10 22 33 47 1.0 2.2 3.3 4.7 10 22 5× 11 6.3×11 8×11.5 5 × 11 6.3× 11 8× 11.5 5 ×11 5×11 6.3 × 11 5×11 6.3× 11 8 × 11.5 5 ×11 5 ×11 5 ×11 5 ×11 5× 11 5× 11 6.3× 11 6.3× 11 8 × 11.5 5×11 6.3× 11 6.3× 11 8× 11.5 5×11 5 ×11 5 ×11 5 ×11 6.3× 11 8× 11.5 0.45 0.45 0.45 0.35 0.35 0.35 0.30 0.30 0.30 0.22 0.22 0.22 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.17 0.17 0.17 0.17 0.15 0.15 0.15 0.15 0.15 0.15 130 210 330 130 210 330 130 130 210 130 210 330 25 35 70 80 90 110 190 190 270 80 170 170 240 40 50 60 70 150 230 ELE-100E□□101ME11D ELE-100E□□221MF11D ELE-100E□□331MHB5D ELE-160E□□470ME11D ELE-160E□□101MF11D ELE-160E□□221MHB5D ELE-250E□□330ME11D ELE-250E□□470ME11D ELE-250E□□101MF11D ELE-350E□□330ME11D ELE-350E□□470MF11D ELE-350E□□101MHB5D ELE-500E□□1R0ME11D ELE-500E□□2R2ME11D ELE-500E□□3R3ME11D ELE-500E□□4R7ME11D ELE-500E□□100ME11D ELE-500E□□220ME11D ELE-500E□□330MF11D ELE-500E□□470MF11D ELE-500E□□101MHB5D ELE-630E□□100ME11D ELE-630E□□220MF11D ELE-630E□□330MF11D ELE-630E□□470MHB5D ELE-101E□□1R0ME11D ELE-101E□□2R2ME11D ELE-101E□□3R3ME11D ELE-101E□□4R7ME11D ELE-101E□□100MF11D ELE-101E□□220MHB5D □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 1.0 to 10 22 to 33 47 to 330 120 0.42 0.55 0.70 1k 0.60 0.75 0.85 10k 0.80 0.90 0.95 100k 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, Downsized, 125℃ GPA Series ・Guaranteed short time at 150℃ ・Downsized, low impedance and high-ripple current version of GXE Downsized Higher ripple current series GXE ・Specified ESR after endurance test Higher temperature ・For high ripple current automotive applications. LXZ (Direct fuel injection and electric power steering etc.) ・Endurance with ripple current : 3,000 to 5,000 hours at 125℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. GPA ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125℃ 25 to 100Vdc (at 20℃, 120Hz) ±20% (M) I=0.03CV or 4µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃, 1 minute) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V tanδ (Max.) 0.14 0.12 0.10 0.10 0.08 0.08 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V Z(-25℃)/Z(+20℃) 2 2 2 2 2 2 Z(-40℃)/Z(+20℃) 4 4 4 4 4 4 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours (3,000 hours for 25L and less) at 125 ℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after the test condition that the rated voltage is applied for 100 hours at 150℃ and DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 4,500 hours (2,500 hours for 25L and less) at 125℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance 1 Endurance 2 Shelf Life ◆DIMENSIONS [mm] φD' φd Sleeve (PET : Brown) F±0.5 ●Terminal Code : E L' Vent 15min. 4min. Gas escape end seal φD φd F φD' L' 12.5 0.6 5.0 14.5 16 0.8 0.8 7.5 7.5 φD+0.5max. L+1.5max. 18 0.8 7.5 ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E GPA AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 470µF:471, 1,000µF:102) Lead forming·taping code Terminal code Voltage code (ex. 25V:250, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, Downsized, 125℃ GPASeries ◆STANDARD RATINGS WV （Vdc） 25 35 50 Cap （µF） Case size φD×L(mm) tanδ 1,200 1,500 1,800 1,800 2,200 2,200 2,700 2,700 2,700 2,700 3,300 3,300 3,300 3,900 3,900 4,700 4,700 5,600 5,600 6,800 680 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,200 2,700 2,700 2,700 3,300 3,300 4,700 470 560 680 680 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,200 1,500 1,800 1,800 2,200 2,200 2,700 12.5×20 14.5×20 12.5×25 16×20 12.5×30 14.5×25 12.5×35 14.5×30 16×25 18×20 12.5×40 14.5×35 16×30 16×35 18×25 14.5×40 18×30 16×40 18×35 18×40 12.5×20 12.5×25 14.5×20 12.5×30 14.5×25 16×20 12.5×35 14.5×30 18×20 12.5×40 16×25 14.5×35 16×30 18×25 14.5×40 16×35 18×30 16×40 18×35 18×40 12.5×20 14.5×20 12.5×25 16×20 12.5×30 14.5×25 12.5×35 14.5×30 16×25 18×20 12.5×40 14.5×35 16×30 18×25 16×35 14.5×40 18×30 16×40 18×35 18×40 0.14 0.14 0.14 0.14 0.16 0.16 0.16 0.16 0.16 0.16 0.18 0.18 0.18 0.18 0.18 0.20 0.20 0.22 0.22 0.24 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.16 0.18 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.12 0.12 0.12 ESR (Initial) (Ω max./100kHz) ESR (End of Life) (Ω max./100kHz) 20℃ -40℃ 20℃ 0.044 0.037 0.033 0.034 0.029 0.028 0.024 0.023 0.026 0.032 0.021 0.021 0.023 0.020 0.024 0.018 0.022 0.017 0.019 0.016 0.044 0.033 0.037 0.029 0.028 0.034 0.024 0.023 0.032 0.021 0.026 0.021 0.023 0.024 0.018 0.020 0.022 0.017 0.019 0.016 0.065 0.055 0.048 0.043 0.041 0.040 0.034 0.036 0.031 0.039 0.028 0.029 0.027 0.029 0.023 0.024 0.026 0.020 0.022 0.018 0.22 0.19 0.17 0.17 0.13 0.14 0.11 0.10 0.13 0.16 0.095 0.095 0.10 0.090 0.12 0.081 0.099 0.077 0.086 0.072 0.22 0.17 0.19 0.13 0.14 0.17 0.11 0.10 0.16 0.095 0.13 0.095 0.10 0.12 0.081 0.090 0.099 0.077 0.086 0.072 0.33 0.28 0.24 0.22 0.18 0.20 0.15 0.16 0.16 0.20 0.13 0.13 0.13 0.15 0.10 0.11 0.12 0.090 0.10 0.080 0.18 0.11 0.13 0.10 0.11 0.080 0.090 0.070 0.080 0.090 0.080 0.060 0.070 0.060 0.070 0.050 0.080 0.040 0.070 0.030 0.18 0.13 0.11 0.11 0.080 0.10 0.090 0.070 0.090 0.080 0.080 0.060 0.070 0.070 0.050 0.060 0.080 0.040 0.070 0.030 0.18 0.11 0.13 0.10 0.11 0.080 0.090 0.070 0.080 0.090 0.080 0.060 0.070 0.070 0.060 0.050 0.080 0.040 0.070 0.030 Part No. -40℃ Rated ripple current (mArms/125℃, 100kHz) 2.2 1.3 1.6 1.3 1.3 0.90 0.80 0.70 1.1 0.60 0.50 0.70 0.90 0.70 0.50 0.50 0.60 0.60 0.50 0.40 2.2 1.6 1.3 1.3 0.90 1.3 0.80 0.70 0.60 0.50 1.1 0.70 0.90 0.50 0.50 0.70 0.60 0.60 0.50 0.40 2.2 1.3 1.6 1.3 1.3 0.90 0.80 0.70 1.1 0.60 0.50 0.70 0.90 0.50 0.70 0.50 0.60 0.60 0.50 0.40 1,820 2,100 2,400 2,280 2,560 2,800 2,970 3,060 3,100 2,490 3,600 3,380 3,160 3,590 3,200 4,000 3,390 4,300 4,200 4,600 1,820 2,400 2,100 2,560 2,800 2,280 2,970 3,060 2,490 3,600 3,100 3,380 3,160 3,200 4,000 3,590 3,390 4,300 4,200 4,600 1,500 1,740 1,900 2,040 2,150 2,190 2,510 2,470 2,620 2,240 2,870 2,840 2,940 2,750 3,300 3,230 3,140 3,720 3,510 3,940 EGPA250E□□122MK20S EGPA250E□□152MU20S EGPA250E□□182MK25S EGPA250E□□182ML20S EGPA250E□□222MK30S EGPA250E□□222MU25S EGPA250E□□272MK35S EGPA250E□□272MU30S EGPA250E□□272ML25S EGPA250E□□272MM20S EGPA250E□□332MK40S EGPA250E□□332MU35S EGPA250E□□332ML30S EGPA250E□□392ML35S EGPA250E□□392MM25S EGPA250E□□472MU40S EGPA250E□□472MM30S EGPA250E□□562ML40S EGPA250E□□562MM35S EGPA250E□□682MM40S EGPA350E□□681MK20S EGPA350E□□102MK25S EGPA350E□□102MU20S EGPA350E□□122MK30S EGPA350E□□122MU25S EGPA350E□□122ML20S EGPA350E□□152MK35S EGPA350E□□152MU30S EGPA350E□□152MM20S EGPA350E□□182MK40S EGPA350E□□182ML25S EGPA350E□□222MU35S EGPA350E□□222ML30S EGPA350E□□222MM25S EGPA350E□□272MU40S EGPA350E□□272ML35S EGPA350E□□272MM30S EGPA350E□□332ML40S EGPA350E□□332MM35S EGPA350E□□472MM40S EGPA500E□□471MK20S EGPA500E□□561MU20S EGPA500E□□681MK25S EGPA500E□□681ML20S EGPA500E□□821MK30S EGPA500E□□821MU25S EGPA500E□□102MK35S EGPA500E□□102MU30S EGPA500E□□102ML25S EGPA500E□□102MM20S EGPA500E□□122MK40S EGPA500E□□122MU35S EGPA500E□□122ML30S EGPA500E□□122MM25S EGPA500E□□152ML35S EGPA500E□□182MU40S EGPA500E□□182MM30S EGPA500E□□222ML40S EGPA500E□□222MM35S EGPA500E□□272MM40S □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, Downsized, 125℃ GPASeries ◆STANDARD RATINGS WV （Vdc） 63 80 100 Cap （µF） Case size φD×L(mm) tanδ 470 680 680 820 1,000 1,000 1,200 1,200 1,500 1,800 330 470 470 560 560 680 680 820 820 1,200 200 270 300 360 390 470 510 560 620 750 16×20 16×25 18×20 16×30 16×35 18×25 16×40 18×30 18×35 18×40 16×20 16×25 18×20 16×30 18×25 16×35 18×30 16×40 18×35 18×40 16×20 18×20 16×25 16×30 18×25 16×35 18×30 16×40 18×35 18×40 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 ESR (Initial) (Ω max./100kHz) ESR (End of Life) (Ω max./100kHz) 20℃ -40℃ 20℃ -40℃ 0.085 0.061 0.070 0.053 0.044 0.049 0.036 0.041 0.035 0.030 0.085 0.061 0.070 0.053 0.049 0.044 0.041 0.036 0.035 0.030 0.11 0.091 0.079 0.068 0.064 0.056 0.054 0.046 0.044 0.039 0.58 0.48 0.49 0.41 0.33 0.34 0.26 0.26 0.21 0.18 0.58 0.48 0.49 0.41 0.34 0.33 0.26 0.26 0.21 0.18 0.88 0.73 0.72 0.62 0.50 0.50 0.39 0.39 0.32 0.27 0.19 0.14 0.19 0.090 0.070 0.14 0.060 0.090 0.070 0.060 0.19 0.14 0.19 0.090 0.14 0.070 0.090 0.060 0.070 0.060 0.25 0.22 0.18 0.13 0.15 0.090 0.13 0.080 0.090 0.080 3.0 2.0 3.0 1.3 0.90 2.0 0.80 1.3 0.90 0.80 3.0 2.0 3.0 1.3 2.0 0.90 1.3 0.80 0.90 0.80 3.9 3.9 2.7 1.9 2.7 1.3 1.9 1.1 1.3 1.1 Rated ripple current (mArms/125℃,100kHz) Part No. 1,790 2,030 1,910 2,330 2,580 2,280 2,900 2,580 2,890 3,210 1,790 2,030 1,910 2,330 2,280 2,580 2,580 2,900 2,890 3,210 1,580 1,690 1,990 2,250 2,110 2,500 2,410 2,700 2,690 2,880 EGPA630E□□471ML20S EGPA630E□□681ML25S EGPA630E□□681MM20S EGPA630E□□821ML30S EGPA630E□□102ML35S EGPA630E□□102MM25S EGPA630E□□122ML40S EGPA630E□□122MM30S EGPA630E□□152MM35S EGPA630E□□182MM40S EGPA800E□□331ML20S EGPA800E□□471ML25S EGPA800E□□471MM20S EGPA800E□□561ML30S EGPA800E□□561MM25S EGPA800E□□681ML35S EGPA800E□□681MM30S EGPA800E□□821ML40S EGPA800E□□821MM35S EGPA800E□□122MM40S EGPA101E□□201ML20S EGPA101E□□271MM20S EGPA101E□□301ML25S EGPA101E□□361ML30S EGPA101E□□391MM25S EGPA101E□□471ML35S EGPA101E□□511MM30S EGPA101E□□561ML40S EGPA101E□□621MM35S EGPA101E□□751MM40S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 200 270 to 560 620 to 1,800 2,200 to 3,900 4,700 to 6,800 120 0.40 0.50 0.60 0.75 0.85 1k 0.82 0.85 0.87 0.90 0.95 10k 0.93 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Please contact us for lifetime estimation. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS GVA Vibration resistant structure, 125℃ Series 2 ・Structure of higher vibration by GPA series (acceleration 392m/s , 40G) ・Guaranteed short time at 150℃ ・Designed for electric power steering and ECU(include engine control, GPA direct fuel injection) etc. ・Rated voltage range : 25 to 100V, Capacitance range : 430 to 5,100μF ・Solvent resistant type ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. Vibration resistance GVA ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance 1 Endurance 2 Shelf Life Vibration -40 to +125℃ 25 to 100Vdc (at 20℃, 120Hz) ±20% (M) I=0.03CV or 4µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃, 1 minute) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V tanδ (Max.) 0.14 0.12 0.10 0.10 0.08 0.08 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V Z(-25℃)/Z(+20℃) 2 2 2 2 2 2 Z(-40℃)/Z(+20℃) 4 4 4 4 4 4 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 125 ℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after the test condition that the rated voltage is applied for 100 hours at 150℃ and DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 4,500 hours at 125℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to vibration test (vibration profile shown below) at room temperature (15 to 35℃). Capacitance change ≦±5％ of the initial value D.F. (tanδ) ≦The initial specified value Leakage current ≦The initial specified value Vibration profile Vibration frequency range Amplitude or Acceleration Sweep rate Direction and period of motion Fixation 10 to 2,000Hz 1.5mm peak to peak or 392m/s2(40G), whichever is the less severe 10 to 2,000 to 10Hz 0.5 octave/minute 2 hours in each of 3 mutually perpendicular directions (total of 6hours) Fix main body and Lead teminal using a fixture tool, please contact us for detail. ◆DIMENSIONS [mm] φd φD' Coated Case F±0.5 ●Terminal Code : E Vent L' 15min. 4min. * Please contact us about lead formings and mounting methods. Gas escape end seal φD φd F φD' L' 18 0.8 7.5 φD±0.5 +1.5 L -1.0 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Vibration resistant structure, 125℃ GVASeries ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E GVA AAA E AA AAA M AAA H Supplement code Size code Capacitance tolerance code Capacitance code (ex. 560µF:561, 2,000µF:202) Lead forming·taping code Terminal code Voltage code (ex. 25V:250, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" ◆STANDARD RATINGS WV (Vdc) 25 35 50 63 80 100 Cap (µF) Case size φD×L(mm) tanδ 3,900 5,100 2,700 3,600 1,600 2,000 1,200 1,500 750 910 430 560 18×30 18×35.5 18×30 18×35.5 18×30 18×35.5 18×30 18×35.5 18×30 18×35.5 18×30 18×35.5 0.18 0.22 0.14 0.16 0.10 0.12 0.10 0.10 0.08 0.08 0.08 0.08 ESR (Ω max./100kHz) 20℃ -40℃ 0.023 0.019 0.023 0.019 0.027 0.022 0.045 0.036 0.045 0.036 0.055 0.044 0.11 0.086 0.11 0.086 0.14 0.10 0.34 0.26 0.34 0.26 0.41 0.32 Rated ripple current (mArms/125℃, 100kHz) Part No. 3,330 3,750 3,330 3,750 3,000 3,450 2,530 2,870 2,530 2,870 2,290 2,620 EGVA250E□□392MM30H EGVA250E□□512MMP1H EGVA350E□□272MM30H EGVA350E□□362MMP1H EGVA500E□□162MM30H EGVA500E□□202MMP1H EGVA630E□□122MM30H EGVA630E□□152MMP1H EGVA800E□□751MM30H EGVA800E□□911MMP1H EGVA101E□□431MM30H EGVA101E□□561MMP1H □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 430 to 560 750 to 2,000 2,700 to 3,900 5,100 120 0.50 0.60 0.75 0.85 1k 0.85 0.87 0.90 0.95 10k 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Please contact us for lifetime estimation. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS High ripple, 125℃ GXF Series ・Downsizing and high-ripple current version of GXE series ・For automobile modules and networking equipment and other high temperature applications Downsized ・Endurance with ripple current : 3,000 hours at 125℃ Higher ripple current ・Solvent resistant type except 160 to 400Vdc GXE ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. GXF ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125℃ 25 to 400Vdc ±20% （M） 25 to 100Vdc I=0.03CV or 4μA, whichever is greater. （20℃, 120Hz） 160 to 400Vdc CV≦1,000 I=0.1CV+40 CV＞1,000 I=0.04CV+100 Where, I : Max. leakage current（μA）, C : Nominal capacitance（μF）, V : Rated voltage（V） （at 20℃ after 1 minute） Dissipation Factor Rated voltage（Vdc） 25V 35V 50V 63V 80V 100V 160 to 250V 350 to 400V （tanδ） tanδ 0.14 0.12 0.10 0.10 0.08 0.08 0.15 0.20 （Max.） When nominal capacitance exceeds 1,000μF, add 0.02 to the value above for each 1,000μF increase. （at 20℃, 120Hz） Low Temperature Rated voltage（Vdc） 25V 35V 50V 63V 80V 100V 160 to 250V 350 to 400V Characteristics Z（-25℃） /Z（+20℃） 2 2 2 2 2 2 3 6 （Max. Impedance Ratio） Z（-40℃）/Z（+20℃） 4 4 4 4 4 4 6 12 （at 120Hz） Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied（the peak voltage shall not exceed the rated voltage）for the 3,000 hours at 125℃. Rated Voltage 25 to 100Vdc 160 to 400Vdc Capacitance change ≦±30% of the initial value ≦±20% of the initial value D.F.（tanδ） ≦300% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours （500hours for 160 to 400Vdc）at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Rated Voltage 25 to 100Vdc 160 to 400Vdc Capacitance change ≦±30% of the initial value ≦±20% of the initial value D.F.（tanδ） ≦300% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦500% of the initial specified value ◆DIMENSIONS [mm] F±0.5 ΦD Φd φD' φd Sleeve (PET : Brown) F±0.5 ●Terminal Code : E F ΦD' L' Vent 15min. 4min. (φ10) (φ12.5 t o φ18) L' 10 0.6 5.0 12.5 14.5 16 0.6 0.8 0.8 5.0 7.5 7.5 ΦD+0.5max. L+1.5max. 18 0.8 7.5 Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E GXF AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex.,39µF:390,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 25V:250,100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS High ripple, 125℃ GXFSeries ◆STANDARD RATINGS Rated ripple ESR Cap WV Case size （Ωmax./100kHz） current （mArms/ （Vdc） （μF） φDxL （mm） 125℃, 20℃ -40℃ 100kHz） 25 35 50 510 750 910 1,200 1,200 1,500 1,600 1,800 2,000 2,200 2,400 2,700 3,000 3,300 3,600 4,300 4,300 4,300 4,700 5,100 5,100 5,100 5,600 6,800 6,800 7,500 8,200 9,100 11,000 300 510 560 680 750 820 1,100 1,100 1,200 1,500 1,500 1,500 2,000 2,000 2,200 2,400 2,400 2,400 2,700 2,700 3,000 3,300 3,300 3,900 4,300 4,300 4,700 5,100 6,200 160 240 270 330 390 430 510 560 560 10×12.5 10×16 12.5×15 10×20 14.5×15 10×25 16×15 12.5×20 10×30 14.5×20 18×15 12.5×25 16×20 12.5×30 14.5×25 12.5×35 16×25 18×20 14.5×30 12.5×40 14.5×35 16×30 18×25 14.5×40 16×35 18×30 16×40 18×35 18×40 10×12.5 10×16 12.5×15 10×20 14.5×15 10×25 12.5×20 16×15 10×30 12.5×25 14.5×20 18×15 12.5×30 16×20 14.5×25 12.5×35 16×25 18×20 12.5×40 14.5×30 14.5×35 16×30 18×25 14.5×40 16×35 18×30 16×40 18×35 18×40 10×12.5 10×16 12.5×15 10×20 14.5×15 10×25 12.5×20 10×30 16×15 0.14 0.094 0.082 0.073 0.067 0.042 0.063 0.038 0.033 0.030 0.053 0.030 0.029 0.025 0.025 0.022 0.022 0.028 0.020 0.019 0.018 0.018 0.020 0.016 0.016 0.016 0.015 0.015 0.014 0.14 0.094 0.082 0.073 0.067 0.042 0.038 0.063 0.033 0.030 0.030 0.053 0.025 0.029 0.025 0.022 0.022 0.028 0.019 0.020 0.018 0.018 0.020 0.016 0.016 0.016 0.015 0.015 0.014 0.24 0.16 0.14 0.12 0.12 0.055 0.049 0.041 0.11 2.1 1.5 1.1 1.1 0.80 0.24 0.76 0.19 0.19 0.17 0.51 0.14 0.13 0.10 0.11 0.080 0.092 0.10 0.081 0.068 0.065 0.071 0.078 0.054 0.056 0.060 0.048 0.049 0.043 2.1 1.5 1.1 1.1 0.80 0.24 0.19 0.76 0.19 0.14 0.17 0.51 0.10 0.13 0.11 0.080 0.092 0.10 0.068 0.081 0.065 0.071 0.078 0.054 0.056 0.060 0.048 0.049 0.043 3.6 2.5 1.8 1.8 1.4 0.31 0.24 0.25 1.3 900 1,300 1,220 1,540 1,320 1,880 1,430 1,590 2,150 1,780 1,630 2,280 1,890 2,760 2,760 3,120 3,030 1,930 3,090 3,610 3,430 3,330 3,200 3,820 3,630 3,480 3,930 3,750 4,040 900 1,300 1,220 1,540 1,320 1,880 1,590 1,430 2,150 2,280 1,780 1,630 2,760 1,890 2,760 3,120 3,030 1,930 3,610 3,090 3,430 3,330 3,200 3,820 3,630 3,480 3,930 3,750 4,040 730 1,080 1,020 1,290 1,090 1,740 1,410 2,020 1,190 Part No. EGXF250E□□511MJC5S EGXF250E□□751MJ16S EGXF250E□□911MK15S EGXF250E□□122MJ20S EGXF250E□□122MU15S EGXF250E□□152MJ25S EGXF250E□□162ML15S EGXF250E□□182MK20S EGXF250E□□202MJ30S EGXF250E□□222MU20S EGXF250E□□242MM15S EGXF250E□□272MK25S EGXF250E□□302ML20S EGXF250E□□332MK30S EGXF250E□□362MU25S EGXF250E□□432MK35S EGXF250E□□432ML25S EGXF250E□□432MM20S EGXF250E□□472MU30S EGXF250E□□512MK40S EGXF250E□□512MU35S EGXF250E□□512ML30S EGXF250E□□562MM25S EGXF250E□□682MU40S EGXF250E□□682ML35S EGXF250E□□752MM30S EGXF250E□□822ML40S EGXF250E□□912MM35S EGXF250E□□113MM40S EGXF350E□□301MJC5S EGXF350E□□511MJ16S EGXF350E□□561MK15S EGXF350E□□681MJ20S EGXF350E□□751MU15S EGXF350E□□821MJ25S EGXF350E□□112MK20S EGXF350E□□112ML15S EGXF350E□□122MJ30S EGXF350E□□152MK25S EGXF350E□□152MU20S EGXF350E□□152MM15S EGXF350E□□202MK30S EGXF350E□□202ML20S EGXF350E□□222MU25S EGXF350E□□242MK35S EGXF350E□□242ML25S EGXF350E□□242MM20S EGXF350E□□272MK40S EGXF350E□□272MU30S EGXF350E□□302MU35S EGXF350E□□332ML30S EGXF350E□□332MM25S EGXF350E□□392MU40S EGXF350E□□432ML35S EGXF350E□□432MM30S EGXF350E□□472ML40S EGXF350E□□512MM35S EGXF350E□□622MM40S EGXF500E□□161MJC5S EGXF500E□□241MJ16S EGXF500E□□271MK15S EGXF500E□□331MJ20S EGXF500E□□391MU15S EGXF500E□□431MJ25S EGXF500E□□511MK20S EGXF500E□□561MJ30S EGXF500E□□561ML15S Rated ripple ESR WV Cap Case size （Ωmax./100kHz） current （mArms/ （Vdc） （μF） φDxL （mm） 125℃, 20℃ -40℃ 100kHz） 50 63 80 100 680 750 750 910 1,000 1,000 1,200 1,200 1,300 1,300 1,500 1,500 1,600 1,800 2,000 2,000 2,200 2,400 2,700 3,300 390 510 510 620 680 680 820 820 910 910 1,000 1,100 1,100 1,200 1,300 1,300 1,500 1,800 2,000 2,400 240 330 330 390 430 470 560 560 560 620 620 680 680 750 820 910 910 1,100 1,300 1,500 130 180 200 240 240 270 330 14.5×20 12.5×25 18×15 16×20 12.5×30 14.5×25 12.5×35 18×20 14.5×30 16×25 12.5×40 14.5×35 16×30 18×25 14.5×40 16×35 18×30 16×40 18×35 18×40 12.5×20 12.5×25 14.5×20 16×20 12.5×30 14.5×25 12.5×35 18×20 14.5×30 16×25 12.5×40 14.5×35 16×30 18×25 14.5×40 16×35 18×30 16×40 18×35 18×40 12.5×20 12.5×25 14.5×20 16×20 12.5×30 14.5×25 12.5×35 16×25 18×20 12.5×40 14.5×30 14.5×35 16×30 18×25 14.5×40 16×35 18×30 16×40 18×35 18×40 12.5×20 14.5×20 12.5×25 12.5×30 16×20 14.5×25 12.5×35 0.038 0.038 0.085 0.037 0.031 0.031 0.027 0.036 0.026 0.027 0.023 0.023 0.023 0.025 0.020 0.020 0.021 0.018 0.019 0.017 0.097 0.072 0.072 0.062 0.052 0.054 0.044 0.055 0.042 0.047 0.038 0.037 0.037 0.044 0.032 0.031 0.037 0.028 0.028 0.023 0.097 0.072 0.072 0.062 0.052 0.054 0.044 0.047 0.055 0.038 0.042 0.037 0.037 0.044 0.032 0.031 0.037 0.028 0.028 0.023 0.12 0.082 0.082 0.062 0.071 0.064 0.051 0.22 0.18 0.87 0.17 0.14 0.14 0.11 0.14 0.11 0.13 0.090 0.085 0.094 0.11 0.072 0.074 0.079 0.063 0.065 0.058 0.75 0.55 0.59 0.39 0.37 0.40 0.29 0.29 0.30 0.27 0.26 0.24 0.23 0.22 0.20 0.17 0.18 0.15 0.13 0.10 0.75 0.55 0.59 0.39 0.37 0.40 0.29 0.27 0.29 0.26 0.30 0.24 0.23 0.22 0.20 0.17 0.18 0.15 0.13 0.10 0.94 0.69 0.70 0.52 0.53 0.52 0.38 1,610 2,030 1,370 1,740 2,510 2,480 2,900 1,830 2,870 2,690 3,260 3,160 3,150 2,900 3,560 3,470 3,330 3,800 3,590 3,850 1,310 1,880 1,510 1,630 2,410 2,130 2,760 1,750 2,700 2,300 3,080 2,940 2,940 2,440 3,350 3,220 3,100 3,590 3,450 3,690 1,310 1,880 1,510 1,630 2,410 2,130 2,760 2,300 1,750 3,080 2,700 2,940 2,940 2,440 3,350 3,220 3,100 3,590 3,450 3,690 1,210 1,450 1,800 2,290 1,580 2,050 2,680 Part No. EGXF500E□□681MU20S EGXF500E□□751MK25S EGXF500E□□751MM15S EGXF500E□□911ML20S EGXF500E□□102MK30S EGXF500E□□102MU25S EGXF500E□□122MK35S EGXF500E□□122MM20S EGXF500E□□132MU30S EGXF500E□□132ML25S EGXF500E□□152MK40S EGXF500E□□152MU35S EGXF500E□□162ML30S EGXF500E□□182MM25S EGXF500E□□202MU40S EGXF500E□□202ML35S EGXF500E□□222MM30S EGXF500E□□242ML40S EGXF500E□□272MM35S EGXF500E□□332MM40S EGXF630E□□391MK20S EGXF630E□□511MK25S EGXF630E□□511MU20S EGXF630E□□621ML20S EGXF630E□□681MK30S EGXF630E□□681MU25S EGXF630E□□821MK35S EGXF630E□□821MM20S EGXF630E□□911MU30S EGXF630E□□911ML25S EGXF630E□□102MK40S EGXF630E□□112MU35S EGXF630E□□112ML30S EGXF630E□□122MM25S EGXF630E□□132MU40S EGXF630E□□132ML35S EGXF630E□□152MM30S EGXF630E□□182ML40S EGXF630E□□202MM35S EGXF630E□□242MM40S EGXF800E□□241MK20S EGXF800E□□331MK25S EGXF800E□□331MU20S EGXF800E□□391ML20S EGXF800E□□431MK30S EGXF800E□□471MU25S EGXF800E□□561MK35S EGXF800E□□561ML25S EGXF800E□□561MM20S EGXF800E□□621MK40S EGXF800E□□621MU30S EGXF800E□□681MU35S EGXF800E□□681ML30S EGXF800E□□751MM25S EGXF800E□□821MU40S EGXF800E□□911ML35S EGXF800E□□911MM30S EGXF800E□□112ML40S EGXF800E□□132MM35S EGXF800E□□152MM40S EGXF101E□□131MK20S EGXF101E□□181MU20S EGXF101E□□201MK25S EGXF101E□□241MK30S EGXF101E□□241ML20S EGXF101E□□271MU25S EGXF101E□□331MK35S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS High ripple, 125℃ GXFSeries ◆STANDARD RATINGS is not solvent resistant. Rated ripple ESR Cap WV Case size （Ωmax./100kHz） current （mArms/ （Vdc） （μF） φDxL （mm） 125℃, 20℃ -40℃ 100kHz） 100 160 200 250 330 330 360 390 390 390 430 510 510 560 620 680 820 51 62 75 82 100 100 110 120 130 150 150 180 180 180 200 200 220 240 270 36 43 56 62 75 75 82 82 100 100 110 130 130 130 150 150 160 180 200 24 30 36 16×25 18×20 14.5×30 12.5×40 14.5×35 16×30 18×25 14.5×40 16×35 18×30 16×40 18×35 18×40 10×20 10×25 12.5×20 10×30 10×35 14.5×20 12.5×25 10×40 16×20 12.5×30 14.5×25 12.5×35 14.5×30 18×20 12.5×40 16×25 14.5×35 18×25 14.5×40 10×20 10×25 12.5×20 10×30 10×35 14.5×20 10×40 12.5×25 12.5×30 16×20 14.5×25 12.5×35 14.5×30 18×20 12.5×40 16×25 14.5×35 18×25 14.5×40 10×20 10×25 12.5×20 0.057 0.069 0.050 0.044 0.044 0.044 0.054 0.038 0.037 0.043 0.032 0.034 0.029 - 0.39 0.39 0.40 0.33 0.33 0.33 0.32 0.26 0.26 0.26 0.21 0.19 0.16 - 2,190 1,690 2,620 2,970 2,850 2,770 2,310 3,230 3,010 2,830 3,320 3,210 3,410 900 1,200 1,220 1,410 1,600 1,340 1,510 1,790 1,500 1,770 1,610 1,970 1,880 1,730 2,150 1,850 2,030 2,050 2,250 900 1,200 1,220 1,410 1,600 1,340 1,790 1,510 1,770 1,500 1,610 1,970 1,880 1,730 2,150 1,850 2,030 2,050 2,250 900 1,200 1,220 Rated ripple ESR WV Cap Case size （Ωmax./100kHz） current （mArms/ （Vdc） （μF） φDxL （mm） 125℃, 20℃ -40℃ 100kHz） Part No. EGXF101E□□331ML25S EGXF101E□□331MM20S EGXF101E□□361MU30S EGXF101E□□391MK40S EGXF101E□□391MU35S EGXF101E□□391ML30S EGXF101E□□431MM25S EGXF101E□□511MU40S EGXF101E□□511ML35S EGXF101E□□561MM30S EGXF101E□□621ML40S EGXF101E□□681MM35S EGXF101E□□821MM40S EGXF161E□□510MJ20S EGXF161E□□620MJ25S EGXF161E□□750MK20S EGXF161E□□820MJ30S EGXF161E□□101MJ35S EGXF161E□□101MU20S EGXF161E□□111MK25S EGXF161E□□121MJ40S EGXF161E□□131ML20S EGXF161E□□151MK30S EGXF161E□□151MU25S EGXF161E□□181MK35S EGXF161E□□181MU30S EGXF161E□□181MM20S EGXF161E□□201MK40S EGXF161E□□201ML25S EGXF161E□□221MU35S EGXF161E□□241MM25S EGXF161E□□271MU40S EGXF201E□□360MJ20S EGXF201E□□430MJ25S EGXF201E□□560MK20S EGXF201E□□620MJ30S EGXF201E□□750MJ35S EGXF201E□□750MU20S EGXF201E□□820MJ40S EGXF201E□□820MK25S EGXF201E□□101MK30S EGXF201E□□101ML20S EGXF201E□□111MU25S EGXF201E□□131MK35S EGXF201E□□131MU30S EGXF201E□□131MM20S EGXF201E□□151MK40S EGXF201E□□151ML25S EGXF201E□□161MU35S EGXF201E□□181MM25S EGXF201E□□201MU40S EGXF251E□□240MJ20S EGXF251E□□300MJ25S EGXF251E□□360MK20S 250 350 400 39 47 51 51 56 62 68 68 82 82 91 91 100 100 120 130 16 20 24 27 33 33 36 36 43 47 47 56 56 56 62 68 68 75 91 12 16 20 20 24 24 27 30 33 36 36 43 43 47 47 51 56 62 68 10×30 10×35 12.5×25 14.5×20 10×40 16×20 12.5×30 14.5×25 12.5×35 18×20 14.5×30 16×25 12.5×40 14.5×35 18×25 14.5×40 10×20 10×25 12.5×20 10×30 10×35 14.5×20 10×40 12.5×25 16×20 12.5×30 14.5×25 12.5×35 16×25 18×20 14.5×30 12.5×40 14.5×35 18×25 14.5×40 10×20 10×25 10×30 12.5×20 10×35 14.5×20 12.5×25 10×40 16×20 12.5×30 14.5×25 12.5×35 18×20 14.5×30 16×25 12.5×40 14.5×35 18×25 14.5×40 - - 1,410 1,600 1,510 1,340 1,790 1,500 1,770 1,610 1,970 1,730 1,880 1,850 2,150 2,030 2,050 2,250 460 610 680 720 820 870 940 980 970 1,210 1,210 1,330 1,130 1,060 1,410 1,450 1,590 1,200 1,820 460 610 720 680 820 870 980 940 970 1,210 1,210 1,330 1,060 1,410 1,130 1,450 1,590 1,200 1,820 Part No. EGXF251E□□390MJ30S EGXF251E□□470MJ35S EGXF251E□□510MK25S EGXF251E□□510MU20S EGXF251E□□560MJ40S EGXF251E□□620ML20S EGXF251E□□680MK30S EGXF251E□□680MU25S EGXF251E□□820MK35S EGXF251E□□820MM20S EGXF251E□□910MU30S EGXF251E□□910ML25S EGXF251E□□101MK40S EGXF251E□□101MU35S EGXF251E□□121MM25S EGXF251E□□131MU40S EGXF351E□□160MJ20S EGXF351E□□200MJ25S EGXF351E□□240MK20S EGXF351E□□270MJ30S EGXF351E□□330MJ35S EGXF351E□□330MU20S EGXF351E□□360MJ40S EGXF351E□□360MK25S EGXF351E□□430ML20S EGXF351E□□470MK30S EGXF351E□□470MU25S EGXF351E□□560MK35S EGXF351E□□560ML25S EGXF351E□□560MM20S EGXF351E□□620MU30S EGXF351E□□680MK40S EGXF351E□□680MU35S EGXF351E□□750MM25S EGXF351E□□910MU40S EGXF401E□□120MJ20S EGXF401E□□160MJ25S EGXF401E□□200MJ30S EGXF401E□□200MK20S EGXF401E□□240MJ35S EGXF401E□□240MU20S EGXF401E□□270MK25S EGXF401E□□300MJ40S EGXF401E□□330ML20S EGXF401E□□360MK30S EGXF401E□□360MU25S EGXF401E□□430MK35S EGXF401E□□430MM20S EGXF401E□□470MU30S EGXF401E□□470ML25S EGXF401E□□510MK40S EGXF401E□□560MU35S EGXF401E□□620MM25S EGXF401E□□680MU40S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers (25 to 100Vdc) Capacitance(µF) Frequency(Hz) 130 to 240 270 to 560 620 to 2,000 2,200 to 4,300 4,700 to 11,000 120 0.40 0.50 0.60 0.75 0.85 (160 to 400Vdc) 1k 0.82 0.85 0.87 0.90 0.95 10k 0.93 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 Capacitance(µF) Frequency(Hz) 12 to 33 36 to 270 50 0.15 0.25 120 0.30 0.35 300 0.45 0.50 1k 0.65 0.70 10k 0.95 0.96 100k 1.00 1.00 Please contact us for lifetime estimation. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS GXE Series ・For automobile modules and other high temperature applications GXE ・Downsize, long life, low impedance and better low temperature characteristics ・Endurance with ripple current : 2,000 to 5,000 hours at 125℃ ・Solvent resistant type except 63 to 450V (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. Long Life, Downsized, 125℃ Downsized Higher ripple current GPA ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125℃ (10 to 250Vdc ) -25 to +125℃ (350 to 450Vdc) 10 to 450Vdc ±20% (M) 10 to 100Vdc I=0.03CV or 4µA, whichever is greater. (at 20℃, 120Hz) 160 to 450Vdc CV≦1,000 I=0.1CV+40 CV>1,000 I=0.04CV+100 Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃, 1 minute) Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V 160 to 250V 350 to 450V tanδ (Max.) 0.20 0.16 0.14 0.12 0.10 0.10 0.08 0.08 0.20 0.24 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V 160 to 250V 350 to 450V Z(-25℃)/Z(+20℃) 3 2 2 2 2 2 2 2 3 6 Z(-40℃)/Z(+20℃) 6 4 4 4 4 4 4 4 6 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified time at 125℃. 10 to 100Vdc 160 to 450Vdc Time 2,000hours φ8 : 2,000hoursφ10 : 3,000hoursφ12.5 &φ16 : 5,000hours Capacitance change ≦±30% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦300% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours (500 hours for 350 to 450Vdc) at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. 10 to 100Vdc 160 to 450Vdc Capacitance change ≦±30% of the initial value ≦±20% of the initial value D.F. (tanδ) ≦300% of the initial specified value ≦200% of the initial specified value Leakage current ≦The initial specified value ≦500% of the initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] F±0.5 φD' φd Sleeve (PET : Orange) F±0.5 ●Terminal Code : E φD φd F φD' L' Vent 15min. 4min. (φ8 & φ10) (φ12.5 & φ16) L' 8 0.6 3.5 10 12.5 16 0.6 0.6 0.8 5.0 5.0 7.5 φD+0.5max. L+2.0max. Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E GXE AAA E AA AAA M AAA N Supplement code Size code Capacitance tolerance code Capacitance code (ex. 4.7µF:4R7,10µF:100,100µF:101) Lead forming·taping code Terminal code Voltage code (ex. 10V:100,100V:101) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long Life, Downsized, 125℃ GXESeries ◆STANDARD RATINGS WV (Vdc) 10 16 25 35 50 63 80 is not solvent resistant. Cap (µF) Rated ripple Impedance current Case size (Ω max./ (mArms/ φD×L(mm) 20℃, 100kHz) 125℃, Note1) 220 330 470 1,000 2,200 3,300 4,700 100 220 330 470 1,000 2,200 3,300 100 220 330 470 1,000 2,200 100 100 220 330 470 1,000 10 22 33 47 100 220 330 470 1,000 33 47 100 220 330 470 1,000 22 33 8×12 10×12.5 10×12.5 10×20 12.5×25 16×25 16×31.5 8×12 10×12.5 10×12.5 10×16 12.5×20 16×25 16×31.5 8×12 10×12.5 10×16 10×20 12.5×25 16×31.5 8×12 10×12.5 10×16 10×20 12.5×20 16×25 8×12 8×12 8×12 8×12 10×12.5 10×20 12.5×20 12.5×25 16×31.5 8×12 10×12.5 10×16 12.5×20 12.5×25 12.5×30 16×31.5 8×12 10×12.5 0.32 0.15 0.15 0.075 0.040 0.031 0.025 0.32 0.15 0.15 0.094 0.058 0.031 0.025 0.32 0.15 0.094 0.075 0.040 0.025 0.32 0.15 0.094 0.075 0.058 0.031 0.75 0.50 0.50 0.50 0.20 0.098 0.081 0.059 0.032 1.5 0.59 0.41 0.16 0.12 0.097 0.059 1.5 0.80 340 620 620 950 1,350 1,620 1,860 340 620 620 790 1,080 1,620 1,860 340 620 790 950 1,350 1,860 340 620 790 950 1,080 1,620 180 250 280 280 520 880 990 1,150 1,590 150 530 690 1,050 1,290 1,460 1,850 150 480 WV (Vdc) Part No. EGXE100E□□221MH12D EGXE100E□□331MJC5S EGXE100E□□471MJC5S EGXE100E□□102MJ20S EGXE100E□□222MK25S EGXE100E□□332ML25S EGXE100E□□472MLN3S EGXE160E□□101MH12D EGXE160E□□221MJC5S EGXE160E□□331MJC5S EGXE160E□□471MJ16S EGXE160E□□102MK20S EGXE160E□□222ML25S EGXE160E□□332MLN3S EGXE250E□□101MH12D EGXE250E□□221MJC5S EGXE250E□□331MJ16S EGXE250E□□471MJ20S EGXE250E□□102MK25S EGXE250E□□222MLN3S EGXE350E□□101MH12D EGXE350E□□101MJC5S EGXE350E□□221MJ16S EGXE350E□□331MJ20S EGXE350E□□471MK20S EGXE350E□□102ML25S EGXE500E□□100MH12D EGXE500E□□220MH12D EGXE500E□□330MH12D EGXE500E□□470MH12D EGXE500E□□101MJC5S EGXE500E□□221MJ20S EGXE500E□□331MK20S EGXE500E□□471MK25S EGXE500E□□102MLN3S EGXE630E□□330MH12D EGXE630E□□470MJC5S EGXE630E□□101MJ16S EGXE630E□□221MK20S EGXE630E□□331MK25S EGXE630E□□471MK30S EGXE630E□□102MLN3S EGXE800E□□220MH12D EGXE800E□□330MJC5S 80 100 160 200 250 350 400 450 Cap (µF) Rated ripple Impedance current Case size (Ω max./ (mArms/ φD×L(mm) 20℃, 100kHz) 125℃, Note1) 47 100 220 330 470 4.7 10 22 33 47 100 220 330 22 33 47 68 100 150 10 22 33 47 68 100 10 22 33 47 68 4.7 10 22 33 47 4.7 10 22 33 47 4.7 10 22 33 10×12.5 10×20 12.5×25 12.5×30 16×25 8×12 8×12 10×12.5 10×12.5 10×16 12.5×20 16×25 16×31.5 10×20 10×25 12.5×20 12.5×25 16×25 16×31.5 10×20 10×25 12.5×20 12.5×25 16×20 16×25 10×20 12.5×20 12.5×25 16×25 16×31.5 10×20 10×25 12.5×25 16×25 16×31.5 10×20 10×25 12.5×30 16×25 16×31.5 10×25 12.5×20 16×25 16×31.5 0.80 0.39 0.18 0.16 0.11 2.0 1.5 0.80 0.80 0.55 0.25 0.11 0.079 － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － － 480 790 1,240 1,390 1,500 130 150 480 480 630 990 1,500 1,790 115 154 187 245 329 434 78 126 157 204 250 329 78 128 171 225 292 53 85 139 189 243 53 86 142 189 243 58 86 154 203 1k 1.50 1.30 10k 1.75 1.40 Part No. EGXE800E□□470MJC5S EGXE800E□□101MJ20S EGXE800E□□221MK25S EGXE800E□□331MK30S EGXE800E□□471ML25S EGXE101E□□4R7MH12D EGXE101E□□100MH12D EGXE101E□□220MJC5S EGXE101E□□330MJC5S EGXE101E□□470MJ16S EGXE101E□□101MK20S EGXE101E□□221ML25S EGXE101E□□331MLN3S EGXE161E□□220MJ20S EGXE161E□□330MJ25S EGXE161E□□470MK20S EGXE161E□□680MK25S EGXE161E□□101ML25S EGXE161E□□151MLN3S EGXE201E□□100MJ20S EGXE201E□□220MJ25S EGXE201E□□330MK20S EGXE201E□□470MK25S EGXE201E□□680ML20S EGXE201E□□101ML25S EGXE251E□□100MJ20S EGXE251E□□220MK20S EGXE251E□□330MK25S EGXE251E□□470ML25S EGXE251E□□680MLN3S EGXE351E□□4R7MJ20S EGXE351E□□100MJ25S EGXE351E□□220MK25S EGXE351E□□330ML25S EGXE351E□□470MLN3S EGXE401E□□4R7MJ20S EGXE401E□□100MJ25S EGXE401E□□220MK30S EGXE401E□□330ML25S EGXE401E□□470MLN3S EGXE451E□□4R7MJ25S EGXE451E□□100MK20S EGXE451E□□220ML25S EGXE451E□□330MLN3S □□ : Enter the appropriate lead forming or taping code. (Note1) Ripple current frequency 10 to 100V = 100kHz 160 to 450V = 120Hz ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers (10 to 100Vdc) Capacitance(µF) Frequency(Hz) 4.7 to 100 220 to 470 1,000 2,200 to 3,300 4,700 120 0.40 0.50 0.60 0.75 0.85 (160 to 450Vdc) 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 Capacitance(µF) Frequency(Hz) 4.7 to 33 47 to 150 50 0.75 0.80 120 1.00 1.00 300 1.25 1.15 100k 1.80 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS GXL Long life, 125℃ GXL Series ・Long-Life version of GXE series Longer life ・For automobile modules and other high temperature applications GXE ・Endurance with ripple current : 5,000 hours at 125℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +125℃ 10 to 50Vdc (at 20℃, 120Hz) ±20% (M) I=0.03CV or 4µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃, 1 minute) Rated voltage (Vdc) 10V 16V 25V 35V 50V tanδ (Max.) 0.20 0.16 0.14 0.12 0.10 (at 20℃, 120Hz) Rated voltage (Vdc) 10V 16V 25V 35V 50V Z(-25℃)/Z(+20℃) 3 2 2 2 2 Z(-40℃)/Z(+20℃) 6 4 4 4 4 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 125℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] φD' φd Sleeve (PET : Orange) F±0.5 ●Terminal Code : E L' Vent 15min. 4min. (φ10) φD φd F φD' L' 10 0.6 5.0 φD+0.5max. L+1.5max. Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E GX L AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100µF:101, 1,000µF:102) Lead forming·taping code Terminal code Voltage code (ex. 10V:100, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, 125℃ GXLSeries ◆STANDARD RATINGS WV (Vdc) 10 16 25 35 50 Cap (µF) Case size φD×L(mm) tanδ Impedance (Ω max./20℃, 100kHz) Rated ripple current (mArms/125℃, 100kHz) Part No. 330 470 1,000 220 330 470 220 330 470 100 220 330 100 220 10 × 12.5 10 × 12.5 10 × 20 10 × 12.5 10 × 12.5 10 × 16 10 × 12.5 10 × 16 10 × 20 10 × 12.5 10 × 16 10 × 20 10 × 12.5 10 × 20 0.20 0.20 0.20 0.16 0.16 0.16 0.14 0.14 0.14 0.12 0.12 0.12 0.10 0.10 0.17 0.17 0.094 0.17 0.17 0.12 0.17 0.12 0.094 0.17 0.12 0.094 0.30 0.19 800 800 1,300 800 800 1,050 800 1,050 1,300 800 1,050 1,300 590 970 EGXL100E□□331MJC5S EGXL100E□□471MJC5S EGXL100E□□102MJ20S EGXL160E□□221MJC5S EGXL160E□□331MJC5S EGXL160E□□471MJ16S EGXL250E□□221MJC5S EGXL250E□□331MJ16S EGXL250E□□471MJ20S EGXL350E□□101MJC5S EGXL350E□□221MJ16S EGXL350E□□331MJ20S EGXL500E□□101MJC5S EGXL500E□□221MJ20S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 100 220 to 470 1,000 120 0.40 0.50 0.60 1k 0.75 0.85 0.87 10k 0.90 0.94 0.95 100k 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, High ripple, 135℃ GPD Series ・Guaranteed short time at 150℃ ・Downsized and high-ripple current version of GPA series GPA ・For automobile modules and other high temperature applications ・Endurance with ripple current : 2,000 to 3,000 hours at 125℃ to 135℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. Downsized Higher ripple current GPD ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +135℃ 25 to 100Vdc (at 20℃, 120Hz) ±20% (M) I=0.03CV or 4µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃, 1 minute) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V tanδ (Max.) 0.14 0.12 0.10 0.10 0.08 0.08 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V Z(-25℃)/Z(+20℃) 2 2 2 2 2 2 Z(-40℃)/Z(+20℃) 4 4 4 4 4 4 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125℃ or 135℃. Time 125℃ 3,000hours 135℃ 25 to 50Vdc：3,000hours 63 to 100Vdc：2,000hours Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after the test condition that the rated voltage is applied for 100 hours at 150℃ and DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125℃ or 135℃. Time 125℃ 2,500hours 135℃ 25 to 50Vdc：2,500hours 63 to 100Vdc：1,500hours Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance 1 Endurance 2 Shelf Life ◆DIMENSIONS [mm] φD' φd Coated Case F±0.5 ●Terminal Code : E 15min. L' Vent 4min. Gas escape end seal φD φd F φD' L' 12.5 0.6 5.0 16 0.8 7.5 φD±0.5 +1.5 L -1.0 18 0.8 7.5 ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E GPD AAA E AA AAA M AAA H Supplement code Size code Capacitance tolerance code Capacitance code (ex. 470µF:471, 1,000µF:102) Lead forming·taping code Terminal code Voltage code (ex. 25V:250, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, High ripple, 135℃ GPDSeries ◆STANDARD RATINGS WV (Vdc) 25 35 50 63 Cap (µF) Case size φD×L(mm) tanδ 2,000 3,000 3,300 3,600 4,300 4,700 4,700 5,100 5,600 6,200 7,500 7,500 9,100 10,000 12,000 1,300 1,800 2,000 2,200 2,400 2,700 3,000 3,300 3,600 3,900 4,300 4,700 5,600 6,200 7,500 620 820 1,000 1,100 1,300 1,300 1,300 1,600 1,600 1,800 2,200 2,400 2,700 3,000 3,600 390 560 680 750 910 910 1,000 1,100 1,200 1,300 1,600 1,600 1,800 2,200 2,400 12.5 × 20 12.5 × 25 16 × 20 12.5 × 30 18 × 20 12.5 × 35 16 × 25 12.5 × 40 16 × 30 18 × 25 16 × 35 18 × 30 16 × 40 18 × 35 18 × 40 12.5 × 20 12.5 × 25 16 × 20 12.5 × 30 18 × 20 12.5 × 35 16 × 25 12.5 × 40 16 × 30 18 × 25 16 × 35 18 × 30 16 × 40 18 × 35 18 × 40 12.5 × 20 12.5 × 25 16 × 20 12.5 × 30 12.5 × 35 16 × 25 18 × 20 12.5 × 40 16 × 30 18 × 25 16 × 35 18 × 30 16 × 40 18 × 35 18 × 40 12.5 × 20 12.5 × 25 16 × 20 12.5 × 30 12.5 × 35 18 × 20 16 × 25 12.5 × 40 16 × 30 18 × 25 16 × 35 18 × 30 16 × 40 18 × 35 18 × 40 0.16 0.18 0.18 0.18 0.20 0.20 0.20 0.22 0.22 0.24 0.26 0.26 0.30 0.32 0.36 0.12 0.12 0.14 0.14 0.14 0.14 0.16 0.16 0.16 0.16 0.18 0.18 0.20 0.22 0.24 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.12 0.12 0.12 0.14 0.14 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.12 0.12 ESR (Ω max./100kHz) Rated ripple current (mArms/100kHz) 20℃ -40℃ 125℃ 135℃ 0.042 0.033 0.035 0.028 0.034 0.025 0.028 0.024 0.023 0.027 0.020 0.022 0.019 0.019 0.018 0.042 0.033 0.035 0.028 0.034 0.025 0.028 0.024 0.023 0.027 0.020 0.022 0.019 0.019 0.018 0.073 0.058 0.050 0.048 0.042 0.042 0.042 0.037 0.035 0.033 0.029 0.028 0.025 0.024 0.023 0.072 0.052 0.053 0.042 0.035 0.044 0.038 0.031 0.034 0.033 0.027 0.028 0.025 0.022 0.021 0.48 0.30 0.27 0.24 0.22 0.21 0.22 0.19 0.18 0.19 0.14 0.16 0.12 0.12 0.10 0.48 0.30 0.27 0.24 0.22 0.21 0.22 0.19 0.18 0.19 0.14 0.16 0.12 0.12 0.10 0.88 0.67 0.55 0.52 0.44 0.44 0.44 0.36 0.36 0.32 0.27 0.25 0.22 0.20 0.16 0.56 0.39 0.34 0.30 0.25 0.26 0.23 0.22 0.20 0.19 0.15 0.15 0.14 0.12 0.11 2,760 3,480 3,040 4,490 3,250 5,140 4,260 5,810 5,480 4,500 6,070 5,600 6,810 6,280 7,070 2,760 3,480 3,040 4,490 3,250 5,140 4,260 5,810 5,480 4,500 6,070 5,600 6,810 6,280 7,070 2,400 3,350 2,960 4,220 4,810 4,040 3,130 5,240 5,130 4,230 5,480 5,240 5,930 5,870 6,420 1,640 2,520 2,140 3,110 3,760 2,350 2,940 4,610 3,860 3,080 4,590 4,080 5,190 5,220 5,660 1,690 2,010 1,860 2,900 1,870 3,190 2,870 3,470 3,400 2,900 3,630 3,470 3,930 3,750 4,080 1,690 2,010 1,860 2,900 1,870 3,190 2,870 3,470 3,400 2,900 3,630 3,470 3,930 3,750 4,080 1,470 2,260 1,870 2,520 2,780 2,500 2,110 3,020 2,960 2,530 3,160 3,020 3,420 3,390 3,700 1,420 2,050 1,910 2,630 2,970 2,100 2,680 3,260 3,050 2,810 3,420 3,220 3,670 3,690 3,820 Part No. EGPD250E□□202MK20H EGPD250E□□302MK25H EGPD250E□□332ML20H EGPD250E□□362MK30H EGPD250E□□432MM20H EGPD250E□□472MK35H EGPD250E□□472ML25H EGPD250E□□512MK40H EGPD250E□□562ML30H EGPD250E□□622MM25H EGPD250E□□752ML35H EGPD250E□□752MM30H EGPD250E□□912ML40H EGPD250E□□103MM35H EGPD250E□□123MM40H EGPD350E□□132MK20H EGPD350E□□182MK25H EGPD350E□□202ML20H EGPD350E□□222MK30H EGPD350E□□242MM20H EGPD350E□□272MK35H EGPD350E□□302ML25H EGPD350E□□332MK40H EGPD350E□□362ML30H EGPD350E□□392MM25H EGPD350E□□432ML35H EGPD350E□□472MM30H EGPD350E□□562ML40H EGPD350E□□622MM35H EGPD350E□□752MM40H EGPD500E□□621MK20H EGPD500E□□821MK25H EGPD500E□□102ML20H EGPD500E□□112MK30H EGPD500E□□132MK35H EGPD500E□□132ML25H EGPD500E□□132MM20H EGPD500E□□162MK40H EGPD500E□□162ML30H EGPD500E□□182MM25H EGPD500E□□222ML35H EGPD500E□□242MM30H EGPD500E□□272ML40H EGPD500E□□302MM35H EGPD500E□□362MM40H EGPD630E□□391MK20H EGPD630E□□561MK25H EGPD630E□□681ML20H EGPD630E□□751MK30H EGPD630E□□911MK35H EGPD630E□□911MM20H EGPD630E□□102ML25H EGPD630E□□112MK40H EGPD630E□□122ML30H EGPD630E□□132MM25H EGPD630E□□162ML35H EGPD630E□□162MM30H EGPD630E□□182ML40H EGPD630E□□222MM35H EGPD630E□□242MM40H □□ : Enter the appropriate lead forming or taping code. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, High ripple, 135℃ GPDSeries ◆STANDARD RATINGS WV (Vdc) 80 100 Cap (µF) Case size φD×L(mm) tanδ 270 390 470 510 620 620 680 750 750 820 1,000 1,100 1,300 1,300 1,600 160 220 270 300 360 360 390 430 470 510 560 620 750 820 910 12.5 × 20 12.5 × 25 16 × 20 12.5 × 30 12.5 × 35 18 × 20 16 × 25 12.5 × 40 16 × 30 18 × 25 16 × 35 18 × 30 16 × 40 18 × 35 18 × 40 12.5 × 20 12.5 × 25 16 × 20 12.5 × 30 12.5 × 35 18 × 20 16 × 25 12.5 × 40 16 × 30 18 × 25 16 × 35 18 × 30 16 × 40 18 × 35 18 × 40 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 ESR (Ω max./100kHz) Rated ripple current (mArms/100kHz) 20℃ -40℃ 125℃ 135℃ 0.072 0.052 0.053 0.042 0.035 0.044 0.038 0.031 0.034 0.033 0.027 0.028 0.025 0.022 0.021 0.090 0.068 0.067 0.052 0.045 0.061 0.048 0.038 0.041 0.045 0.036 0.037 0.028 0.030 0.026 0.56 0.39 0.34 0.30 0.25 0.26 0.23 0.22 0.20 0.19 0.15 0.15 0.14 0.12 0.11 0.75 0.55 0.47 0.41 0.35 0.35 0.33 0.29 0.27 0.25 0.23 0.20 0.18 0.16 0.14 1,640 2,520 2,140 3,110 3,760 2,350 2,940 4,610 3,860 3,080 4,590 4,080 5,190 5,220 5,660 1,580 2,140 2,050 2,950 3,530 2,270 2,790 4,140 3,440 2,920 4,190 3,920 5,020 4,710 5,280 1,420 2,050 1,910 2,630 2,970 2,100 2,680 3,260 3,050 2,810 3,420 3,220 3,670 3,690 3,820 1,410 1,960 1,670 2,330 2,630 1,860 2,360 2,920 2,720 2,470 2,960 2,920 3,380 3,330 3,560 Part No. EGPD800E□□271MK20H EGPD800E□□391MK25H EGPD800E□□471ML20H EGPD800E□□511MK30H EGPD800E□□621MK35H EGPD800E□□621MM20H EGPD800E□□681ML25H EGPD800E□□751MK40H EGPD800E□□751ML30H EGPD800E□□821MM25H EGPD800E□□102ML35H EGPD800E□□112MM30H EGPD800E□□132ML40H EGPD800E□□132MM35H EGPD800E□□162MM40H EGPD101E□□161MK20H EGPD101E□□221MK25H EGPD101E□□271ML20H EGPD101E□□301MK30H EGPD101E□□361MK35H EGPD101E□□361MM20H EGPD101E□□391ML25H EGPD101E□□431MK40H EGPD101E□□471ML30H EGPD101E□□511MM25H EGPD101E□□561ML35H EGPD101E□□621MM30H EGPD101E□□751ML40H EGPD101E□□821MM35H EGPD101E□□911MM40H □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 160 220 to 620 680 to 2,000 2,200 to 4,300 4,700 to 12,000 120 0.40 0.50 0.60 0.75 0.85 1k 0.75 0.85 0.87 0.90 0.95 10k 0.90 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 1.00 Please contact us for lifetime estimation. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS GVD Vibration resistant structure, 135℃ Series 2 ・Structure of higher vibration resistance by GPD series (acceleration 392m/s , 40G) ・Guaranteed short time at 150℃ Vibration resistance ・Designed for electric power steering and ECU (include engine control, GPD direct fuel injection) etc. ・Rated voltage range : 25 to 100V, Capacitance range : 510 to 8,200μF ・Solvent resistant type ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. GVD ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance 1 Endurance 2 Shelf Life Vibration -40 to +135℃ 25 to 100Vdc (at 20℃, 120Hz) ±20% (M) I=0.03CV or 4µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃, 1 minute) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V tanδ (Max.) 0.14 0.12 0.10 0.10 0.08 0.08 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Rated voltage (Vdc) 25V 35V 50V 63V 80V 100V Z(-25℃)/Z(+20℃) 2 2 2 2 2 2 Z(-40℃)/Z(+20℃) 4 4 4 4 4 4 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125℃ or 135℃. Time 125℃ 25 to 100Vdc：3,000hours 135℃ 25 to 50Vdc：3,000hours 63 to 100Vdc：2,000hours Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after the test condition that the rated voltage is applied for 100 hours at 150℃ and DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125℃ or 135℃. Time 125℃ 25 to 100Vdc：2,500hours 135℃ 25 to 50Vdc：2,500hours 63 to 100Vdc：1,500hours Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to vibration test (vibration profile shown below) at room temperature (15 to 35℃). Capacitance change ≦±5％ of the initial value D.F. (tanδ) ≦The initial specified value Leakage current ≦The initial specified value Vibration profile Vibration frequency range Amplitude or Acceleration Sweep rate Direction and period of motion Fixation 10 to 2,000Hz 1.5mm peak to peak or 392m/s2(40G), whichever is the less severe 10 to 2,000 to 10Hz 0.5 octave/minute 2 hours in each of 3 mutually perpendicular directions (total of 6hours) Fix main body and Lead teminal using a fixture tool, please contact us for detail. ◆DIMENSIONS [mm] φd φ D' Coated Case F±0.5 ●Terminal Code : E Vent L' 15min. 4min. * Please contact us about lead formings and mounting methods. Gas escape end seal φD φd F φD' L' 18 0.8 7.5 φD±0.5 +1.5 L -1.0 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Vibration resistant structure, 135℃ GVDSeries ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 9 8 10 11 12 13 14 15 16 17 18 E GVD AAA E AA AAA M AAA H Supplement code Size code Capacitance tolerance code Capacitance code (ex. 680µF:681, 8,200µF:822) Lead forming·taping code Terminal code Voltage code (ex. 25V:250, 50V:500) Series code Category Please refer to "Product code guide (radial lead type)" ◆STANDARD RATINGS WV (Vdc) 25 35 50 63 80 100 Cap (µF) Case size φD×L(mm) tanδ 6,200 8,200 3,600 4,700 2,000 2,400 1,300 1,800 820 1,200 510 680 18×30 18×35.5 18×30 18×35.5 18×30 18×35.5 18×30 18×35.5 18×30 18×35.5 18×30 18×35.5 0.24 0.28 0.16 0.18 0.12 0.12 0.10 0.10 0.08 0.08 0.08 0.08 ESR (Ωmax/100kHz) Rated ripple current (mArms/100kHz) 20℃ -40℃ 125℃ 135℃ 0.023 0.019 0.023 0.019 0.029 0.024 0.029 0.024 0.029 0.024 0.038 0.030 0.19 0.13 0.19 0.13 0.26 0.20 0.18 0.14 0.18 0.14 0.25 0.19 5,380 6,110 5,380 6,110 5,050 5,760 3,930 4,920 3,930 4,920 3,800 4,550 3,330 3,750 3,330 3,750 2,910 3,330 3,100 3,520 3,100 3,520 2,830 3,210 Part No. EGVD250E□□622MM30H EGVD250E□□822MMP1H EGVD350E□□362MM30H EGVD350E□□472MMP1H EGVD500E□□202MM30H EGVD500E□□242MMP1H EGVD630E□□132MM30H EGVD630E□□182MMP1H EGVD800E□□821MM30H EGVD800E□□122MMP1H EGVD101E□□511MM30H EGVD101E□□681MMP1H □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 510 680 to 2,000 2,400 to 3,600 4,700 to 8,200 120 0.50 0.60 0.75 0.85 1k 0.85 0.87 0.90 0.95 10k 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 Please contact us for lifetime estimation. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, High ripple, 150℃ GQB Series ・Endurance with ripple current : 1,000 hours at 150℃ Higher temperature Higher ripple current ・For automobile transmission, electric water pump and other high temperature GPD applications. ・Rated voltage range : 25 & 35V, Nominal capacitance range : 560 to 3,600μF ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. GQB ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +150℃ 25, 35Vdc (at 20℃, 120Hz) ±20% (M) I=0.03CV or 4µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃, 1 minute) Rated voltage (Vdc) 25V 35V tanδ (Max.) 0.14 0.12 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) Rated voltage (Vdc) 25V 35V Z(-25℃)/Z(+20℃) 2 2 Z(-40℃)/Z(+20℃) 4 4 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 1,000 hours at 150℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 125℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 150℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance 1 Endurance 2 Shelf Life ◆DIMENSIONS [mm] φD' φd Coated Case F±0.5 ●Terminal Code : E 15min. L' Vent 4min. Gas escape end seal φD φd F φD' L' 12.5 0.6 5.0 16 0.8 7.5 φD±0.5 +1.5 L -1.0 18 0.8 7.5 ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E GQB AAA E AA AAA M AAA H Supplement code Size code Capacitance tolerance code Capacitance code (ex. 560µF:561, 1,800µF:182) Lead forming·taping code Terminal code Voltage code (ex. 25V:250, 35V:350) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Long life, High ripple, 150℃ GQBSeries ◆STANDARD RATINGS WV (Vdc) 25 35 Cap (µF) Case size φD×L(mm) tanδ 1,100 1,600 1,800 2,400 2,700 3,600 560 750 910 1,200 1,400 1,800 12.5 × 20 12.5 × 25 16 × 20 18 × 20 16 × 25 18 × 25 12.5 × 20 12.5 × 25 16 × 20 18 × 20 16 × 25 18 × 25 0.14 0.14 0.14 0.16 0.16 0.18 0.12 0.12 0.12 0.12 0.12 0.12 ESR (Ω max./100kHz) Rated ripple current (mArms/100kHz) 20℃ -40℃ 150℃ 125℃ 0.12 0.080 0.070 0.058 0.050 0.042 0.15 0.12 0.10 0.084 0.067 0.058 1.4 1.0 1.0 0.90 0.80 0.70 4.5 3.4 3.0 2.0 2.0 1.4 1,100 1,300 1,460 1,560 1,720 1,800 1,000 1,200 1,260 1,320 1,600 1,680 2,620 2,910 3,590 3,830 4,560 4,800 2,230 2,680 3,110 3,250 4,060 4,500 Part No. EGQB250E□□112MK20H EGQB250E□□162MK25H EGQB250E□□182ML20H EGQB250E□□242MM20H EGQB250E□□272ML25H EGQB250E□□362MM25H EGQB350E□□561MK20H EGQB350E□□751MK25H EGQB350E□□911ML20H EGQB350E□□122MM20H EGQB350E□□142ML25H EGQB350E□□182MM25H □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 560 750 to 1,800 2,400 to 3,600 120 0.50 0.60 0.75 1k 0.85 0.87 0.90 10k 0.94 0.95 0.95 100k 1.00 1.00 1.00 Please contact us for lifetime estimation. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS LBV For airbag module, 105℃ LBV Series ・Downsizing of LBG series. ・For airbag application and power supply application ・High capacitance, low ESR and good low temperature behavior ・Endurance with ripple current : 5,000 hours at 105℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. Downsized LBG ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current -55 to +105℃ 25 & 35Vdc 3,000 to 15,000µF 0 to +30% (A) I=0.01CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 25V 35V tanδ (Max.) 0.20 0.16 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. Rated voltage (Vdc) 25V 35V Z(-55℃)/Z(+20℃) 3 3 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] φD' φd Sleeve (PET : Brown) F±0.5 ●Terminal Code : E L' Vent 15min. 4min. 18 φD 16 φd 0.8 0.8 7.5 7.5 F φD' φD+0.5max. L' L+1.5max. Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L BV AAA E AA AAA A AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 5,600µF:562, 12,000µF:123) Lead forming·taping code Terminal code Voltage code (ex. 25V:250, 35V:350) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For airbag module, 105℃ LBVSeries ◆STANDARD RATINGS Cap (μF) Case size φD×L (mm) tanδ 4,400 5,700 6,200 8,100 8,500 9,900 11,000 11,000 12,000 15,000 3,000 4,000 4,300 5,600 5,900 6,900 7,600 8,200 9,000 10,000 16 × 20 18 × 20 16 × 25 18 × 25 16 × 31.5 16 × 35.5 16 × 40 18 × 31.5 18 × 35.5 18 × 40 16 × 20 18 × 20 16 × 25 18 × 25 16 × 31.5 16 × 35.5 18 × 31.5 16 × 40 18 × 35.5 18 × 40 0.26 0.28 0.30 0.34 0.34 0.36 0.40 0.40 0.42 0.48 0.20 0.22 0.22 0.24 0.24 0.26 0.28 0.30 0.32 0.34 WV (Vdc) 25 35 ESR (Ω max./100kHz) 20℃ 0.030 0.028 0.024 0.022 0.020 0.018 0.016 0.018 0.016 0.015 0.030 0.028 0.024 0.022 0.020 0.018 0.018 0.016 0.016 0.015 -40℃ 0.095 0.080 0.073 0.060 0.065 0.055 0.050 0.045 0.040 0.035 0.095 0.080 0.073 0.060 0.065 0.055 0.045 0.050 0.040 0.035 Rated ripple current (mArms/105℃, 100kHz) Part No. 2,000 2,100 2,300 2,400 2,550 2,700 2,900 2,700 2,900 3,100 2,000 2,100 2,300 2,400 2,550 2,700 2,700 2,900 2,900 3,100 ELBV250E□□442AL20S ELBV250E□□572AM20S ELBV250E□□622AL25S ELBV250E□□812AM25S ELBV250E□□852ALN3S ELBV250E□□992ALP1S ELBV250E□□113AL40S ELBV250E□□113AMN3S ELBV250E□□123AMP1S ELBV250E□□153AM40S ELBV350E□□302AL20S ELBV350E□□402AM20S ELBV350E□□432AL25S ELBV350E□□562AM25S ELBV350E□□592ALN3S ELBV350E□□692ALP1S ELBV350E□□762AMN3S ELBV350E□□822AL40S ELBV350E□□902AMP1S ELBV350E□□103AM40S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 3,000 4,000 to 15,000 120 0.75 0.85 1k 0.90 0.95 10k 0.95 0.98 100k 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS LBG For airbag module, 105℃ Series ・For airbag application ・High capacitance, low impedance, and good low temperature behavior ・Endurance with ripple current : 5,000 hours at 105℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS2 Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. LBK Downsized LBG ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current -55 to +105℃ 25 & 35Vdc 1,000 to 11,000µF 0 to +30% (A) I=0.01CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 25V 35V tanδ (Max.) 0.20 0.16 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. Rated voltage (Vdc) 25V 35V Z(-55℃)/Z(+20℃) 3 3 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] φD' φd Sleeve (PET : Dark blue) F±0.5 ●Terminal Code : E L' Vent 15min. 4min. 18 φD 12.5 14.5 16 φd 0.6 0.8 0.8 0.8 F 5.0 7.5 7.5 7.5 φD' φD+0.5max. L' L+1.5max. Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L BG AAA E AA AAA A AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1,000µF:102, 11,000µF:113) Lead forming·taping code Terminal code Voltage code (ex. 16V:160, 35V:350) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For airbag module, 105℃ LBGSeries ◆STANDARD RATINGS Cap (µF) Case size φD×L(mm) tanδ 1,700 2,400 2,400 2,800 3,000 3,400 3,500 4,200 4,200 4,500 4,600 5,400 5,600 6,000 6,400 6,600 7,800 7,900 9,200 11,000 1,000 1,400 1,400 1,600 1,800 2,000 2,100 2,500 2,500 2,700 2,800 3,200 3,400 3,600 3,800 4,000 4,700 4,800 5,600 6,700 12.5 × 20 12.5 × 25 14.5 × 20 12.5 × 30 16 × 20 14.5 × 25 12.5 × 35 16 × 25 18 × 20 12.5 × 40 14.5 × 31.5 14.5 × 35.5 16 × 31.5 18 × 25 14.5 × 40 16 × 35.5 16 × 40 18 × 31.5 18 × 35.5 18 × 40 12.5 × 20 12.5 × 25 14.5 × 20 12.5 × 30 16 × 20 14.5 × 25 12.5 × 35 16 × 25 18 × 20 12.5 × 40 14.5 × 31.5 14.5 × 35.5 16 × 31.5 18 × 25 14.5 × 40 16 × 35.5 16 × 40 18 × 31.5 18 × 35.5 18 × 40 0.20 0.22 0.22 0.22 0.24 0.24 0.24 0.26 0.26 0.26 0.26 0.28 0.28 0.30 0.30 0.30 0.32 0.32 0.36 0.40 0.16 0.16 0.16 0.16 0.16 0.18 0.18 0.18 0.18 0.18 0.18 0.20 0.20 0.20 0.20 0.22 0.22 0.22 0.24 0.26 WV (Vdc) 25 35 Impedance (Ω max./100kHz) 20℃ -40℃ Rated ripple current (mArms/105℃, 100kHz) Part No. 0.057 0.045 0.051 0.039 0.044 0.041 0.033 0.033 0.042 0.027 0.032 0.028 0.026 0.030 0.025 0.023 0.021 0.024 0.022 0.020 0.057 0.045 0.051 0.039 0.044 0.041 0.033 0.033 0.042 0.027 0.032 0.028 0.026 0.030 0.025 0.023 0.021 0.024 0.022 0.020 0.29 0.23 0.26 0.20 0.22 0.21 0.17 0.17 0.21 0.14 0.16 0.14 0.13 0.15 0.13 0.12 0.11 0.12 0.11 0.10 0.29 0.23 0.26 0.20 0.22 0.21 0.17 0.17 0.21 0.14 0.16 0.14 0.13 0.15 0.13 0.12 0.11 0.12 0.11 0.10 1,700 2,000 2,000 2,300 2,250 2,400 2,700 2,600 2,500 3,100 2,700 3,100 3,200 2,800 3,400 3,500 3,800 3,500 3,700 4,000 1,700 2,000 2,000 2,300 2,250 2,400 2,700 2,600 2,500 3,100 2,700 3,100 3,200 2,800 3,400 3,500 3,800 3,500 3,700 4,000 ELBG250E □□ 172AK20S ELBG250E □□ 242AK25S ELBG250E □□ 242AU20S ELBG250E □□ 282AK30S ELBG250E □□ 302AL20S ELBG250E □□ 342AU25S ELBG250E □□ 352AK35S ELBG250E □□ 422AL25S ELBG250E □□ 422AM20S ELBG250E □□ 452AK40S ELBG250E □□ 462AUN3S ELBG250E □□ 542AUP1S ELBG250E □□ 562ALN3S ELBG250E □□ 602AM25S ELBG250E □□ 642AU40S ELBG250E □□ 662ALP1S ELBG250E □□ 782AL40S ELBG250E □□ 792AMN3S ELBG250E □□ 922AMP1S ELBG250E □□ 113AM40S ELBG350E □□ 102AK20S ELBG350E □□ 142AK25S ELBG350E □□ 142AU20S ELBG350E □□ 162AK30S ELBG350E □□ 182AL20S ELBG350E □□ 202AU25S ELBG350E □□ 212AK35S ELBG350E □□ 252AL25S ELBG350E □□ 252AM20S ELBG350E □□ 272AK40S ELBG350E □□ 282AUN3S ELBG350E □□ 322AUP1S ELBG350E □□ 342ALN3S ELBG350E □□ 362AM25S ELBG350E □□ 382AU40S ELBG350E □□ 402ALP1S ELBG350E □□ 472AL40S ELBG350E □□ 482AMN3S ELBG350E □□ 562AMP1S ELBG350E □□ 672AM40S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 1,000 to 2,000 2,100 to 3,800 4,000 to 11,000 120 0.60 0.75 0.85 1k 0.87 0.90 0.95 10k 0.95 0.95 0.98 100k 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For photo flash PH Series ・The PH series capacitors are designed for photo flash ・RoHS2 Compliant ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -20 to +65℃ 300, 315, 330Vdc -10 to +20% (V) I=1×C Where, I : Max. leakage current (µA), C : Nominal capacitance (µF) 0.06max. Dissipation Factor (tanδ) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after charge and discharge are repeated 5,000 times at room temperature (5 to 35℃). Discharge resistance or Xenon tube : 0.7 to 1.0Ω. Capacitance change ≦±10% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦150% of the initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 65℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±10% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦150% of the initial specified value Charge and Discharge Characteristics Shelf Life ◆DIMENSIONS [mm] φD' φd Sleeve (PET : Black) F±0.5 ●Terminal Code : E L' Vent 15min. 4min. φD 6.0 to 7.5 8.0 to 8.5 9.0 to 9.5 10.0 to 14.0 14.5 to 18.0 0.6 0.6 0.5 0.6 0.8 φd 5 4 F 2.5 3.5 7.5 φD' φD+0.5max. L' L+1.0max. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E P H - A A A E A A A A A MA A A S ●Size Code Supplement code φD code (14th, 15th) φD code Size code (L code) φD(mm) 14th 15th Size code (φD code) 0 6.0 6 Nominal capacitance code (ex. 50µF:500,100µF:101) 5 6.5 6 Lead forming·taping code 0 7.0 7 Terminal code 5 7.5 7 Rated voltage code (ex. 315V:3B1,330V:331) 0 8.0 8 Series code 5 8.5 8 Category 0 9.0 9 Please refer to "Product code guide (radial lead type)" 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 9 A A B B C C D D E E F F G G H H J 5 0 5 0 5 0 5 0 5 0 5 0 5 0 5 0 5 0 L code (16th, 17th) L(mm) 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 29.0 30.0 31.0 32.0 33.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 41.0 42.0 43.0 44.0 45.0 L code 16th 17th 5 1 6 1 7 1 8 1 9 1 0 2 1 2 2 2 3 2 4 2 5 2 6 2 7 2 8 2 9 2 0 3 1 3 2 3 3 3 4 3 5 3 6 3 7 3 8 3 9 3 0 4 1 4 2 4 3 4 4 4 5 4 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For photo flash PHSeries ◆RATINGS (REFERENCE) WV (Vdc) 315 330 Cap (µF) Case size φD×L(mm) tanδ Part No. 86 122 144 209 80 114 137 194 10× 30 10× 40 12.5× 30 12.5 × 40 10× 30 10 × 40 12.5× 30 12.5× 40 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 EPH-3B1E □□ 860A030S EPH-3B1E □□ 121A040S EPH-3B1E □□ 1E1C530S EPH-3B1E □□ 211C540S EPH-331E □□ 800A030S EPH-331E □□ 1B1A040S EPH-331E □□ 1D1C530S EPH-331E □□ 1K1C540S □□ : Enter the appropriate lead forming or taping code. ●Products of vents on the sealing rubber DIMENSIONS[mm] <In the case of diameter 10mm> Lead Wire Vent f V F φD 10 V (4.6) f (1.8) F 5±0.5 Products of vent on rubber type, please make clearance about 1mm minimum between rubber and board. If it is difficult to make clearance 1mm minimum between rubber and board, please arrange gas escaping hole on the board (same position and 40% minimum diameter from the vent). The products of dual vents on rubber, requires placement one or two gas escaping hole on the board. ●Products of a vent on the case Please make the following open space over the vent so that the vent can operate correctly. Case diameter φ6 to 16mm φ16.5mm and up Clearance 2mm minimum 3mm minimum Above part numbers are only reference. Please consult with us about detail specifications (rated voltage, capacitance, case size, type of rubber, etc...). Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart PART NUMBERING SYSTEM Product code guide (Snap-in type) (Example : KMS series, 400V-330µF,φ30×30L) Please refer to the following table For more details, refer to Product Guide. Contents Code Series Code Type Code Tol.(%) Code Polar E KMS KMS Snap-in VS ±20 M Snap-in VN PET Flat terminal for PCB LI PVC 1 2 3 4 5 E KMS Category Series code 6 7 8 For Connector LR Horizontal LC Straight VR Sleeve material Terminal plating Code material 9 10 11 12 13 14 15 16 17 18 4 0 1 V S N 3 3 1 M R 30 S Voltage code Terminal code Voltage(V) Code Capacitance code Dummy terminal code Terminal # Code S Sn M Size code Supplement code φD(mm) Code L(mm) Code Capacitance tolerance Cap.(µF) Code 6.3 6R3 0 N 39 390 20 N 15 15 10 100 1 S 47 470 22 P 20 20 25 250 2 D 100 101 25.4 Q 25 25 100 101 3 T 470 471 30 R 30 30 250 251 1,000 102 35 A 35 35 315 3B1 4,700 472 40 B 40 40 10,000 103 45 45 50 50 55 55 60 60 *Refer to the appendix (Part number) for codes not listed here. Available terminals [mm] D=φ30 toφ40 Terminal, Dummy code : LIN Terminal, Dummy code : VEN PC board pin-out (View from Solder side) PC board pin-out (View from Solder side) PC board pin-out (View from Solder side) 3.3 4.2 5 2-φ2 4.5±1 Vent D=φ35, φ40 Terminal, Dummy code : VND D=φ35, φ40 *1 5.5±1 Vent 4-φ2 B : Positive, A, C : Dummy B : Positive, A, C : Dummy 60 B φD+1max. 60 C 1-φ2.5min Terminal, Dummy code : LIS D=φ50 PC board pin-out (View from Solder side) 22.5 φD+1max. Vent 60 B 2-φ2 *1 14.2 *1 PC board pin-out (View from Solder side) A 10 4±1 A 5.8±1 *1 60 C 4-φ2 PC board pin-out (View from Solder side) Vent A : Dummy A 3-1.5×6.5 *1 4.0 +0.2 - 0.1 11.0 Terminal, Dummy code : VRD 4.75 φD+1max. *1 Vent 22.5 5.8±1 φD+1max. 10 φD+1max. 2-1.2×6 Vent D=φ30, φ35 15.5 D=φ22 toφ35 φD+1max. Terminal, Dummy code : VNN 26.8 D=φ20×30 to 50L, φ22×30 to 50L Horizontal mounting Terminal, Dummy code : LCN Negative mark φD+1max. PC board pin-out (View from Solder side) 2-φ2 *1 Vent 1.5±0.1 3±1 8±1 8 *1 Negative terminal : Mesh marking *2 Use the dummy terminals for mechanical support only. The dummy terminals must not be connected to any circuit trace on PC board, be sure to electrically isolate from the negative and the positive terminals. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS SMR Series Downsized snap-ins, 85℃ SMR ・Endurance with ripple current : 2,000 hours at 85℃ ・Downsized and high ripple current from SMQ series ・Non solvent resistant type ・RoHS2 Compliant Downsized Higher ripple SMQ ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85℃ 400 to 450Vdc ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 400V 420 & 450V tanδ (Max.) 0.15 0.20 Rated voltage (Vdc) 400 to 450V Z(-25℃)/Z(+20℃) 8 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 85℃. Capacitance change ≦±20% of the initial value D. F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 85℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D. F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] ●Terminal Code : VS (φ22 to φ35) : Standard Negative mark Sleeve (PET : Black) φD+1max. φD+1max. 10 4.0±0.5 L±2.5 PC board pin-out (View from Solder side) 2-1.2×6 2-φ2 Vent Negative mark 4.2±0.5 Sleeve (PET : Black) ●Terminal Code : LI (φ35) PC board pin-out (View from Solder side) Vent 5±0.5 L±2.5 4.5±1 14.2±1 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E S MR A A A V S N A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 180µF:181, 1,000µF:102) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 400V:401, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 85℃ SMRSeries ◆STANDARD RATINGS WV (Vdc) 400 420 Cap (µF) Rated ripple Case size current tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 150 180 220 220 270 270 330 330 330 390 390 390 390 470 470 470 560 560 680 680 820 1,000 120 180 180 220 220 270 270 270 330 330 330 22 ×25 22 ×30 22 ×35 25.4 ×25 22 ×40 25.4 ×30 22 ×45 25.4 ×35 30 ×25 22 ×50 25.4 ×40 30 ×30 35 ×25 25.4 ×45 30 ×35 35 ×30 30 ×40 35 ×30 30 ×45 35 ×35 35 ×45 35 × 50 22 × 25 22 × 30 25.4 × 25 22 × 35 25.4 × 30 22 × 45 25.4 × 35 30 × 25 22 × 50 25.4 × 40 30 × 30 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.30 1.49 1.69 1.65 1.90 1.88 2.15 2.16 2.10 2.40 2.40 2.32 2.05 2.69 2.60 2.28 2.92 2.48 3.30 2.79 3.25 3.66 1.15 1.48 1.51 1.68 1.71 1.94 1.99 1.87 2.20 2.24 2.08 Part No. ESMR401VSN151MP25S ESMR401VSN181MP30S ESMR401VSN221MP35S ESMR401VSN221MQ25S ESMR401VSN271MP40S ESMR401VSN271MQ30S ESMR401VSN331MP45S ESMR401VSN331MQ35S ESMR401VSN331MR25S ESMR401VSN391MP50S ESMR401VSN391MQ40S ESMR401VSN391MR30S ESMR401VSN391MA25S ESMR401VSN471MQ45S ESMR401VSN471MR35S ESMR401VSN471MA30S ESMR401VSN561MR40S ESMR401VSN561MA30S ESMR401VSN681MR45S ESMR401VSN681MA35S ESMR401VSN821MA45S ESMR401VSN102MA50S ESMR421VSN121MP25S ESMR421VSN181MP30S ESMR421VSN181MQ25S ESMR421VSN221MP35S ESMR421VSN221MQ30S ESMR421VSN271MP45S ESMR421VSN271MQ35S ESMR421VSN271MR25S ESMR421VSN331MP50S ESMR421VSN331MQ40S ESMR421VSN331MR30S WV (Vdc) 420 450 Cap (µF) Rated ripple Case size current tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 330 390 390 470 470 470 560 560 680 680 820 120 150 180 180 220 220 220 270 270 330 330 330 390 390 390 470 470 560 560 680 820 35 × 25 25.4 × 45 30 × 35 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 22 × 25 22 × 30 22 × 35 25.4 × 25 22 × 40 25.4 × 30 30 × 25 22 × 45 25.4 × 35 25.4 × 40 30 × 30 35 × 25 25.4 × 50 30 × 35 35 × 30 30 × 40 35 × 35 30 × 45 35 × 40 35 × 45 35 × 50 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.99 2.47 2.32 2.77 2.61 2.41 2.93 2.67 3.28 3.11 3.43 1.12 1.32 1.49 1.42 1.67 1.66 1.68 1.88 1.87 2.11 2.10 2.10 2.37 2.32 2.32 2.66 2.54 2.93 2.87 3.21 3.60 Part No. ESMR421VSN331MA25S ESMR421VSN391MQ45S ESMR421VSN391MR35S ESMR421VSN471MQ50S ESMR421VSN471MR40S ESMR421VSN471MA30S ESMR421VSN561MR45S ESMR421VSN561MA35S ESMR421VSN681MR50S ESMR421VSN681MA40S ESMR421VSN821MA45S ESMR451VSN121MP25S ESMR451VSN151MP30S ESMR451VSN181MP35S ESMR451VSN181MQ25S ESMR451VSN221MP40S ESMR451VSN221MQ30S ESMR451VSN221MR25S ESMR451VSN271MP45S ESMR451VSN271MQ35S ESMR451VSN331MQ40S ESMR451VSN331MR30S ESMR451VSN331MA25S ESMR451VSN391MQ50S ESMR451VSN391MR35S ESMR451VSN391MA30S ESMR451VSN471MR40S ESMR451VSN471MA35S ESMR451VSN561MR45S ESMR451VSN561MA40S ESMR451VSN681MA45S ESMR451VSN821MA50S ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 400 to 450Vdc 50 0.77 120 1.00 300 1.16 1k 1.30 10k 1.41 50k 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS SMQ Standard snap-ins, 85℃ SMR Series Downsized ・Endurance with ripple current : 2,000 hours at 85℃ ・Non solvent resistant type ・RoHS2 Compliant SMQ ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85℃ 160 to 450Vdc ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 160 to 250V 315 to 400V 420 & 450V tanδ (Max.) 0.15 0.15 0.20 Rated voltage (Vdc) 160 to 250V 315 to 400V 420 & 450V Z(-25℃)/Z(+20℃) 4 8 8 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 85℃. Capacitance change ≦±20% of the initial value D. F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 85℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D. F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] ●Terminal Code : VS (φ22 to φ35) : Standard Negative mark Sleeve (PET : Black) φD+1max. φD+1max. 10 Vent PC board pin-out (View from Solder side) 2-1.2×6 2-φ2 4.0±0.5 L±2 Negative mark 4.2±0.5 Sleeve (PET : Black) ●Terminal Code : LI (φ35) PC board pin-out (View from Solder side) Vent 5±0.5 L±2 4.5±1 14.2±1 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E S MQ A A A V S N A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 82µF:820, 3,300µF:332) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 160V:161, 315V:3B1, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard snap-ins, 85℃ SMQSeries ◆STANDARD RATINGS WV (Vdc) 160 180 200 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 560 680 820 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,500 1,800 1,800 1,800 2,200 2,200 2,700 3,300 3,900 470 560 680 680 820 820 1,000 1,000 1,000 1,200 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 1,800 2,200 2,200 2,700 3,300 390 470 560 560 680 680 820 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,700 22 ×25 22 ×30 22 ×35 22 ×40 25.4 ×30 22 ×45 25.4 ×35 30 ×25 22 ×50 25.4 ×40 30 ×30 35 ×25 25.4 ×45 30 ×35 35 ×30 30 ×40 35 ×35 35 ×40 35 ×45 35 ×50 22×25 22 ×30 22 ×30 25.4 ×25 22 ×35 25.4 ×30 22 ×45 25.4 ×35 30 ×25 22 ×50 25.4 ×40 30 ×30 35 ×25 25.4 ×45 30 ×35 35 ×30 25.4 ×50 30 ×40 35 ×30 30 ×45 35 ×40 35 ×45 35 ×50 22×25 22 ×30 22 ×30 25.4 ×25 22 ×35 25.4 ×30 22 ×40 25.4 ×30 30 ×25 22 ×45 25.4 ×35 30 ×30 35 ×25 25.4 ×40 30 ×30 35 ×30 25.4 ×50 30 ×35 35 ×30 30 ×45 35 ×35 30 ×50 35 ×40 35 ×50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 2.25 2.50 2.75 3.00 3.00 3.25 3.25 3.25 3.73 3.73 3.73 3.73 4.20 4.20 4.20 4.78 4.78 5.45 5.75 6.00 2.08 2.25 2.50 2.50 2.75 2.75 3.00 3.00 3.00 3.31 3.31 3.31 3.31 3.83 3.83 3.83 4.32 4.32 4.32 4.92 4.92 5.52 5.75 1.68 1.85 2.43 2.43 2.68 2.68 2.93 2.93 2.93 3.25 3.25 3.25 3.25 3.50 3.50 3.50 3.87 3.87 3.87 4.32 4.32 4.92 4.92 5.45 Part No. ESMQ161VSN561MP25S ESMQ161VSN681MP30S ESMQ161VSN821MP35S ESMQ161VSN102MP40S ESMQ161VSN102MQ30S ESMQ161VSN122MP45S ESMQ161VSN122MQ35S ESMQ161VSN122MR25S ESMQ161VSN152MP50S ESMQ161VSN152MQ40S ESMQ161VSN152MR30S ESMQ161VSN152MA25S ESMQ161VSN182MQ45S ESMQ161VSN182MR35S ESMQ161VSN182MA30S ESMQ161VSN222MR40S ESMQ161VSN222MA35S ESMQ161VSN272MA40S ESMQ161VSN332MA45S ESMQ161VSN392MA50S ESMQ181VSN471MP25S ESMQ181VSN561MP30S ESMQ181VSN681MP30S ESMQ181VSN681MQ25S ESMQ181VSN821MP35S ESMQ181VSN821MQ30S ESMQ181VSN102MP45S ESMQ181VSN102MQ35S ESMQ181VSN102MR25S ESMQ181VSN122MP50S ESMQ181VSN122MQ40S ESMQ181VSN122MR30S ESMQ181VSN122MA25S ESMQ181VSN152MQ45S ESMQ181VSN152MR35S ESMQ181VSN152MA30S ESMQ181VSN182MQ50S ESMQ181VSN182MR40S ESMQ181VSN182MA30S ESMQ181VSN222MR45S ESMQ181VSN222MA40S ESMQ181VSN272MA45S ESMQ181VSN332MA50S ESMQ201VSN391MP25S ESMQ201VSN471MP30S ESMQ201VSN561MP30S ESMQ201VSN561MQ25S ESMQ201VSN681MP35S ESMQ201VSN681MQ30S ESMQ201VSN821MP40S ESMQ201VSN821MQ30S ESMQ201VSN821MR25S ESMQ201VSN102MP45S ESMQ201VSN102MQ35S ESMQ201VSN102MR30S ESMQ201VSN102MA25S ESMQ201VSN122MQ40S ESMQ201VSN122MR30S ESMQ201VSN122MA30S ESMQ201VSN152MQ50S ESMQ201VSN152MR35S ESMQ201VSN152MA30S ESMQ201VSN182MR45S ESMQ201VSN182MA35S ESMQ201VSN222MR50S ESMQ201VSN222MA40S ESMQ201VSN272MA50S WV (Vdc) 250 315 350 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 270 330 390 390 470 470 560 560 560 680 680 680 820 820 820 820 1,000 1,000 1,000 1,200 1,200 1,500 1,500 1,800 180 220 270 330 330 330 390 390 390 470 470 470 470 560 560 560 680 680 820 820 1,000 1,000 150 180 220 270 270 330 330 390 390 390 390 470 470 470 560 560 560 680 680 820 820 22 × 25 22 × 30 22 × 30 25.4 × 25 22 × 35 25.4 × 30 22 × 40 25.4 × 30 30 × 25 22 × 45 25.4 × 35 30 × 30 22 × 50 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 35 × 30 30 × 40 35 × 35 30 × 50 35 × 40 35 × 45 22 × 25 22 × 30 22 × 30 22 × 40 25.4 × 30 30 × 25 22 × 45 25.4 × 35 30 × 30 22 × 50 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 35 × 30 30 × 40 35 × 35 30 × 45 35 × 40 30 × 50 35 × 45 22 × 25 22 × 30 22 × 35 22 × 40 25.4 × 30 22 × 45 25.4 × 35 22 × 50 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 35 × 30 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 45 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.31 1.75 1.91 1.91 2.11 2.11 2.25 2.25 2.25 2.50 2.50 2.50 2.77 2.77 2.77 2.77 3.32 3.32 3.32 3.53 3.53 4.04 4.04 4.55 1.21 1.41 1.60 1.82 1.82 1.82 2.01 2.01 2.01 2.27 2.27 2.27 2.27 2.56 2.56 2.56 2.87 2.87 3.25 3.25 3.63 3.63 1.12 1.22 1.44 1.66 1.66 1.88 1.88 2.06 2.06 2.06 2.06 2.40 2.40 2.40 2.60 2.60 2.60 2.96 2.96 3.25 3.25 Part No. ESMQ251VSN271MP25S ESMQ251VSN331MP30S ESMQ251VSN391MP30S ESMQ251VSN391MQ25S ESMQ251VSN471MP35S ESMQ251VSN471MQ30S ESMQ251VSN561MP40S ESMQ251VSN561MQ30S ESMQ251VSN561MR25S ESMQ251VSN681MP45S ESMQ251VSN681MQ35S ESMQ251VSN681MR30S ESMQ251VSN821MP50S ESMQ251VSN821MQ40S ESMQ251VSN821MR30S ESMQ251VSN821MA25S ESMQ251VSN102MQ45S ESMQ251VSN102MR35S ESMQ251VSN102MA30S ESMQ251VSN122MR40S ESMQ251VSN122MA35S ESMQ251VSN152MR50S ESMQ251VSN152MA40S ESMQ251VSN182MA45S ESMQ3B1VSN181MP25S ESMQ3B1VSN221MP30S ESMQ3B1VSN271MP30S ESMQ3B1VSN331MP40S ESMQ3B1VSN331MQ30S ESMQ3B1VSN331MR25S ESMQ3B1VSN391MP45S ESMQ3B1VSN391MQ35S ESMQ3B1VSN391MR30S ESMQ3B1VSN471MP50S ESMQ3B1VSN471MQ40S ESMQ3B1VSN471MR30S ESMQ3B1VSN471MA25S ESMQ3B1VSN561MQ45S ESMQ3B1VSN561MR35S ESMQ3B1VSN561MA30S ESMQ3B1VSN681MR40S ESMQ3B1VSN681MA35S ESMQ3B1VSN821MR45S ESMQ3B1VSN821MA40S ESMQ3B1VSN102MR50S ESMQ3B1VSN102MA45S ESMQ351VSN151MP25S ESMQ351VSN181MP30S ESMQ351VSN221MP35S ESMQ351VSN271MP40S ESMQ351VSN271MQ30S ESMQ351VSN331MP45S ESMQ351VSN331MQ35S ESMQ351VSN391MP50S ESMQ351VSN391MQ40S ESMQ351VSN391MR30S ESMQ351VSN391MA25S ESMQ351VSN471MQ45S ESMQ351VSN471MR35S ESMQ351VSN471MA30S ESMQ351VSN561MQ50S ESMQ351VSN561MR40S ESMQ351VSN561MA30S ESMQ351VSN681MR45S ESMQ351VSN681MA35S ESMQ351VSN821MR50S ESMQ351VSN821MA45S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard snap-ins, 85℃ SMQSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 350 1,000 120 150 180 220 220 270 270 270 330 330 330 330 390 390 390 470 470 470 560 560 680 680 820 100 120 150 150 180 180 220 220 220 270 270 35 ×50 22 ×25 22 ×30 22 ×35 22 ×40 25.4 ×30 22 ×45 25.4 ×35 30 ×25 22 ×50 25.4 ×40 30 ×30 35 ×25 25.4× 45 30 × 35 35 × 30 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 22× 25 22 × 25 22 × 30 25.4 × 25 22 × 35 25.4 × 30 22 × 40 25.4 × 35 30 × 25 22 × 50 25.4 × 35 400 420 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 3.54 1.02 1.16 1.44 1.49 1.49 1.67 1.67 1.67 1.90 1.90 1.90 1.90 2.13 2.13 2.13 2.39 2.39 2.39 2.69 2.69 2.96 2.96 3.25 0.97 1.08 1.30 1.30 1.48 1.48 1.65 1.65 1.65 1.94 1.94 Part No. ESMQ351VSN102MA50S ESMQ401VSN121MP25S ESMQ401VSN151MP30S ESMQ401VSN181MP35S ESMQ401VSN221MP40S ESMQ401VSN221MQ30S ESMQ401VSN271MP45S ESMQ401VSN271MQ35S ESMQ401VSN271MR25S ESMQ401VSN331MP50S ESMQ401VSN331MQ40S ESMQ401VSN331MR30S ESMQ401VSN331MA25S ESMQ401VSN391MQ45S ESMQ401VSN391MR35S ESMQ401VSN391MA30S ESMQ401VSN471MQ50S ESMQ401VSN471MR40S ESMQ401VSN471MA30S ESMQ401VSN561MR45S ESMQ401VSN561MA35S ESMQ401VSN681MR50S ESMQ401VSN681MA40S ESMQ401VSN821MA45S ESMQ421VSN101MP25S ESMQ421VSN121MP25S ESMQ421VSN151MP30S ESMQ421VSN151MQ25S ESMQ421VSN181MP35S ESMQ421VSN181MQ30S ESMQ421VSN221MP40S ESMQ421VSN221MQ35S ESMQ421VSN221MR25S ESMQ421VSN271MP50S ESMQ421VSN271MQ35S WV (Vdc) 420 450 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 270 330 330 330 390 390 390 470 470 560 560 680 82 100 120 150 150 180 180 220 220 220 220 270 270 270 330 330 330 390 390 470 470 560 560 30 × 30 25.4 × 45 30 × 35 35 × 30 25.4 × 50 30 × 35 35 × 30 30 × 40 35 × 35 30 × 50 35 × 40 35 × 45 22 × 25 22 × 25 22 × 30 22 × 35 25.4 × 25 22 × 40 25.4 × 30 22 × 45 25.4 × 40 30 × 30 35 × 25 22 × 50 25.4 × 40 30 × 30 25.4 × 50 30 × 40 35 × 30 30 × 40 35 × 35 30 × 45 35 × 40 30 × 50 35 × 45 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.94 2.17 2.17 2.17 2.27 2.27 2.27 2.61 2.61 2.82 2.82 3.11 0.83 0.93 1.04 1.19 1.19 1.35 1.35 1.55 1.55 1.55 1.55 1.78 1.78 1.78 2.01 2.01 2.01 2.24 2.24 2.53 2.53 2.82 2.82 Part No. ESMQ421VSN271MR30S ESMQ421VSN331MQ45S ESMQ421VSN331MR35S ESMQ421VSN331MA30S ESMQ421VSN391MQ50S ESMQ421VSN391MR35S ESMQ421VSN391MA30S ESMQ421VSN471MR40S ESMQ421VSN471MA35S ESMQ421VSN561MR50S ESMQ421VSN561MA40S ESMQ421VSN681MA45S ESMQ451VSN820MP25S ESMQ451VSN101MP25S ESMQ451VSN121MP30S ESMQ451VSN151MP35S ESMQ451VSN151MQ25S ESMQ451VSN181MP40S ESMQ451VSN181MQ30S ESMQ451VSN221MP45S ESMQ451VSN221MQ40S ESMQ451VSN221MR30S ESMQ451VSN221MA25S ESMQ451VSN271MP50S ESMQ451VSN271MQ40S ESMQ451VSN271MR30S ESMQ451VSN331MQ50S ESMQ451VSN331MR40S ESMQ451VSN331MA30S ESMQ451VSN391MR40S ESMQ451VSN391MA35S ESMQ451VSN471MR45S ESMQ451VSN471MA40S ESMQ451VSN561MR50S ESMQ451VSN561MA45S ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 160 to 250Vdc 315 to 450Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KHE Downsized snap-ins, 105℃ New! Series KHE ・Downsized from KMZ series ・Endurance with ripple current : 2,000 hours at 105℃ ・Rated voltage range : 400 to 450Vdc, Capacitance range : 200 to 1,300µF ・Non solvent resistant type ・RoHS2 Compliant Downsized KMZ ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 400 to 450Vdc ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 400 to 450V tanδ(Max.) 0.20 Rated voltage (Vdc) 400 to 450V Z(-25℃)/Z(+20℃) 8 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] Sleeve (PET : Brown) ●Terminal Code : LI (φ30,φ35) PC board pin-out (View from Solder side) Negative mark Sleeve (PET : Brown) Negative mark 2-1.2×6 Vent φD+1max. φD+1max. 10 2-φ2 4.0±0.5 L±2.5 Vent PC board pin-out (View from Solder side) 4.2±0.5 ●Terminal Code : VS (φ25.4 to φ35) : Standard 5±0.5 L±2.5 4.5±1 14.2±1 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 E KH E 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 470µF:471, 1,000µF:102) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 400V:401, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 105℃ KHESeries New! ◆STANDARD RATINGS WV (Vdc) 400 420 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 220 300 330 360 430 430 430 510 510 560 560 620 620 680 680 680 820 820 910 1,000 1,000 1,100 1,200 1,300 220 270 330 360 390 390 430 470 510 560 560 620 25.4 ×25 25.4 ×30 30 ×25 25.4 ×35 25.4 ×40 30 ×30 35 ×25 25.4 ×45 30 ×35 25.4 ×50 35 ×30 25.4 ×55 30 ×40 25.4 ×60 30 ×45 35 ×35 30 ×50 35 ×40 30 ×55 30 ×60 35 ×45 35 ×50 35 ×55 35 ×60 25.4×25 25.4 ×30 30×25 25.4 ×35 25.4 ×40 30 ×30 35 ×25 25.4 ×45 30 ×35 25.4 ×50 35 ×30 25.4 ×55 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.13 1.35 1.41 1.54 1.72 1.63 1.51 1.91 1.82 2.03 1.75 2.20 2.06 2.35 2.21 1.95 2.47 2.22 2.65 2.83 2.51 2.69 2.86 3.03 1.13 1.28 1.41 1.54 1.64 1.55 1.51 1.83 1.82 2.03 1.75 2.20 Part No. EKHE401VSN221MQ25S EKHE401VSN301MQ30S EKHE401VSN331MR25S EKHE401VSN361MQ35S EKHE401VSN431MQ40S EKHE401VSN431MR30S EKHE401VSN431MA25S EKHE401VSN511MQ45S EKHE401VSN511MR35S EKHE401VSN561MQ50S EKHE401VSN561MA30S EKHE401VSN621MQ55S EKHE401VSN621MR40S EKHE401VSN681MQ60S EKHE401VSN681MR45S EKHE401VSN681MA35S EKHE401VSN821MR50S EKHE401VSN821MA40S EKHE401VSN911MR55S EKHE401VSN102MR60S EKHE401VSN102MA45S EKHE401VSN112MA50S EKHE401VSN122MA55S EKHE401VSN132MA60S EKHE421VSN221MQ25S EKHE421VSN271MQ30S EKHE421VSN331MR25S EKHE421VSN361MQ35S EKHE421VSN391MQ40S EKHE421VSN391MR30S EKHE421VSN431MA25S EKHE421VSN471MQ45S EKHE421VSN511MR35S EKHE421VSN561MQ50S EKHE421VSN561MA30S EKHE421VSN621MQ55S WV (Vdc) 420 450 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 620 680 680 680 820 820 910 910 1,000 1,100 1,200 1,300 200 240 270 330 390 390 390 430 470 470 510 560 560 620 620 620 680 750 820 820 910 1,000 1,100 1,200 30 × 40 25.4 × 60 30 × 45 35 × 35 30 × 50 35 × 40 30 × 55 35 × 45 30 × 60 35 × 50 35 × 55 35 × 60 25.4 × 25 25.4 × 30 30 × 25 25.4 × 35 25.4 × 40 30 × 30 35 × 25 25.4 × 45 25.4 × 50 30 × 35 35 × 30 25.4 × 55 30 × 40 25.4 × 60 30 × 45 35 × 35 30 × 50 35 × 40 30 × 55 35 × 45 30 × 60 35 × 50 35 × 55 35 × 60 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 2.06 2.35 2.21 1.95 2.47 2.22 2.65 2.40 2.83 2.69 2.86 3.03 1.07 1.21 1.28 1.48 1.64 1.55 1.43 1.75 1.86 1.74 1.67 2.09 1.96 2.25 2.11 1.86 2.25 2.13 2.52 2.27 2.70 2.56 2.74 2.92 Part No. EKHE421VSN621MR40S EKHE421VSN681MQ60S EKHE421VSN681MR45S EKHE421VSN681MA35S EKHE421VSN821MR50S EKHE421VSN821MA40S EKHE421VSN911MR55S EKHE421VSN911MA45S EKHE421VSN102MR60S EKHE421VSN112MA50S EKHE421VSN122MA55S EKHE421VSN132MA60S EKHE451VSN201MQ25S EKHE451VSN241MQ30S EKHE451VSN271MR25S EKHE451VSN331MQ35S EKHE451VSN391MQ40S EKHE451VSN391MR30S EKHE451VSN391MA25S EKHE451VSN431MQ45S EKHE451VSN471MQ50S EKHE451VSN471MR35S EKHE451VSN511MA30S EKHE451VSN561MQ55S EKHE451VSN561MR40S EKHE451VSN621MQ60S EKHE451VSN621MR45S EKHE451VSN621MA35S EKHE451VSN681MR50S EKHE451VSN751MA40S EKHE451VSN821MR55S EKHE451VSN821MA45S EKHE451VSN911MR60S EKHE451VSN102MA50S EKHE451VSN112MA55S EKHE451VSN122MA60S ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) Multipliers 50 0.77 120 1.00 300 1.10 1k 1.21 10k 1.32 50k 1.33 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KMZ Upgrade! Downsized snap-ins, 105℃ KMZ Series ・The lower temperature range of the category temperature range has been expended. ・Downsized from KMW series ・Endurance with ripple current : 2,000 hours at 105℃ ・Rated voltage range : 420 & 450Vdc, Capacitance range : 120 to 820µF ・Non solvent resistant type ・RoHS2 Compliant Downsized KMW ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 420 & 450Vdc ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 420 & 450V tanδ(Max.) 0.20 Rated voltage (Vdc) 420 & 450V Z(-25℃)/Z(+20℃) 8 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] ●Terminal Code : VS (φ22 to φ30) : Standard Sleeve (PET : Brown) PC board pin-out (View from Solder side) Negative mark φD+1max. 10 2-φ2 4.0±0.5 L±2.5 Vent The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 E KMZ 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 180µF:181, 820µF:821) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 420V:421, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 105℃ KMZSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 420 150 180 180 220 270 270 270 330 330 390 390 390 470 470 560 560 680 820 22 ×25 22 ×30 25.4 ×25 22 ×35 22 ×40 25.4 ×30 30 ×25 22 ×45 25.4 ×35 22 ×55 25.4 ×40 30 ×30 25.4 ×50 30 ×35 25.4 ×55 30 ×40 30 ×50 30 ×55 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.87 1.00 1.02 1.13 1.27 1.28 1.28 1.44 1.48 1.63 1.64 1.55 1.86 1.74 2.09 1.96 2.25 2.52 Part No. EKMZ421VSN151MP25S EKMZ421VSN181MP30S EKMZ421VSN181MQ25S EKMZ421VSN221MP35S EKMZ421VSN271MP40S EKMZ421VSN271MQ30S EKMZ421VSN271MR25S EKMZ421VSN331MP45S EKMZ421VSN331MQ35S EKMZ421VSN391MP55S EKMZ421VSN391MQ40S EKMZ421VSN391MR30S EKMZ421VSN471MQ50S EKMZ421VSN471MR35S EKMZ421VSN561MQ55S EKMZ421VSN561MR40S EKMZ421VSN681MR50S EKMZ421VSN821MR55S WV (Vdc) Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 450 120 180 180 220 220 270 270 270 330 330 330 390 390 390 470 470 560 560 680 820 22 × 25 22 × 30 25.4 × 25 22 × 35 25.4 × 30 22 × 45 25.4 × 35 30 × 25 22 × 50 25.4 × 40 30 × 30 22 × 55 25.4 × 45 30 × 35 25.4 × 55 30 × 40 25.4 × 60 30 × 45 30 × 50 30 × 60 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.78 1.00 1.02 1.13 1.16 1.30 1.34 1.28 1.47 1.51 1.43 1.63 1.67 1.59 1.91 1.79 2.13 2.01 2.25 2.56 Part No. EKMZ451VSN121MP25S EKMZ451VSN181MP30S EKMZ451VSN181MQ25S EKMZ451VSN221MP35S EKMZ451VSN221MQ30S EKMZ451VSN271MP45S EKMZ451VSN271MQ35S EKMZ451VSN271MR25S EKMZ451VSN331MP50S EKMZ451VSN331MQ40S EKMZ451VSN331MR30S EKMZ451VSN391MP55S EKMZ451VSN391MQ45S EKMZ451VSN391MR35S EKMZ451VSN471MQ55S EKMZ451VSN471MR40S EKMZ451VSN561MQ60S EKMZ451VSN561MR45S EKMZ451VSN681MR50S EKMZ451VSN821MR60S ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) Multipliers 50 0.77 120 1.00 300 1.16 1k 1.30 10k 1.41 50k 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KMW Downsized snap-ins, 105℃ KMW Series ・Downsized from KMR series ・Endurance with ripple current : 2,000 hours at 105℃ ・Rated voltage range : 400 to 450Vdc, Capacitance range : 120 to 1,000µF ・Non solvent resistant type ・RoHS2 Compliant Downsized KMR ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105℃ 400 to 450Vdc ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 400V 420 & 450V tanδ(Max.) 0.15 0.20 Rated voltage (Vdc) 400 to 450V Z(-25℃)/Z(+20℃) 8 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] Sleeve (PET : Brown) ●Terminal Code : LI (φ35) PC board pin-out (View from Solder side) Negative mark Sleeve (PET : Brown) Negative mark 2-1.2×6 Vent φD+1max. φD+1max. 10 2-φ2 4.0±0.5 L±2.5 Vent PC board pin-out (View from Solder side) 4.2±0.5 ●Terminal Code : VS (φ22 to φ35) : Standard 5±0.5 L±2.5 4.5±1 14.2±1 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 E K MW 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 180µF:181, 1,000µF:102) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 400V:401, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 105℃ KMWSeries ◆STANDARD RATINGS WV (Vdc) 400 420 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 150 180 220 220 270 330 330 330 390 390 390 390 470 470 560 560 680 680 680 820 1,000 120 150 180 220 270 270 270 330 330 330 22 ×25 22 ×30 22 ×35 25.4 ×25 25.4 ×30 22 ×45 25.4 ×35 30 ×25 22 ×50 25.4 ×40 30 ×30 35 ×25 25.4 ×45 30 ×35 30 ×40 35 ×30 30 ×45 30 ×50 35 ×35 35 ×40 35 ×50 22×25 22 ×30 25.4 ×25 25.4 ×30 22 ×45 25.4 ×35 30 ×25 22 ×50 25.4 ×40 30 ×30 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.91 1.04 1.18 1.15 1.31 1.50 1.51 1.46 1.67 1.67 1.61 1.40 1.87 1.81 2.03 1.70 2.29 2.33 1.90 2.16 2.50 0.78 0.91 1.02 1.16 1.30 1.34 1.28 1.47 1.51 1.43 Part No. EKMW401VSN151MP25S EKMW401VSN181MP30S EKMW401VSN221MP35S EKMW401VSN221MQ25S EKMW401VSN271MQ30S EKMW401VSN331MP45S EKMW401VSN331MQ35S EKMW401VSN331MR25S EKMW401VSN391MP50S EKMW401VSN391MQ40S EKMW401VSN391MR30S EKMW401VSN391MA25S EKMW401VSN471MQ45S EKMW401VSN471MR35S EKMW401VSN561MR40S EKMW401VSN561MA30S EKMW401VSN681MR45S EKMW401VSN681MR50S EKMW401VSN681MA35S EKMW401VSN821MA40S EKMW401VSN102MA50S EKMW421VSN121MP25S EKMW421VSN151MP30S EKMW421VSN181MQ25S EKMW421VSN221MQ30S EKMW421VSN271MP45S EKMW421VSN271MQ35S EKMW421VSN271MR25S EKMW421VSN331MP50S EKMW421VSN331MQ40S EKMW421VSN331MR30S WV (Vdc) 420 450 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 330 390 390 390 470 470 560 560 680 120 150 150 180 180 220 220 220 270 270 270 330 330 390 390 390 470 470 560 560 680 820 35 × 25 25.4 × 45 25.4 × 50 30 × 35 30 × 40 35 × 30 30 × 45 35 × 35 35 × 40 22 × 25 22 × 30 25.4 × 25 22 × 35 25.4 × 30 22 × 40 25.4 × 35 30 × 25 22 × 50 25.4 × 40 30 × 30 25.4 × 45 30 × 35 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.38 1.67 1.70 1.59 1.79 1.67 2.01 1.85 2.11 0.78 0.91 0.93 1.02 1.05 1.15 1.21 1.15 1.36 1.36 1.29 1.54 1.46 1.70 1.63 1.52 1.85 1.77 2.04 2.02 2.16 2.42 Part No. EKMW421VSN331MA25S EKMW421VSN391MQ45S EKMW421VSN391MQ50S EKMW421VSN391MR35S EKMW421VSN471MR40S EKMW421VSN471MA30S EKMW421VSN561MR45S EKMW421VSN561MA35S EKMW421VSN681MA40S EKMW451VSN121MP25S EKMW451VSN151MP30S EKMW451VSN151MQ25S EKMW451VSN181MP35S EKMW451VSN181MQ30S EKMW451VSN221MP40S EKMW451VSN221MQ35S EKMW451VSN221MR25S EKMW451VSN271MP50S EKMW451VSN271MQ40S EKMW451VSN271MR30S EKMW451VSN331MQ45S EKMW451VSN331MR35S EKMW451VSN391MQ50S EKMW451VSN391MR40S EKMW451VSN391MA30S EKMW451VSN471MR45S EKMW451VSN471MA35S EKMW451VSN561MR50S EKMW451VSN561MA40S EKMW451VSN681MA45S EKMW451VSN821MA50S ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 400 to 450Vdc 50 0.77 120 1.00 300 1.16 1k 1.30 10k 1.41 50k 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KMR Series Downsized snap-ins, 105℃ KMR ・Downsized 5mm in height from current snap-ins KMQ series ・Max. 50% up ripple current than same case size of KMQ series ・Endurance with ripple current : 2,000 hours at 105℃ ・Rated voltage range : 160 to 450Vdc, Capacitance range : 100 to 3,300µF ・For inverter control, switching power supplies ・Non solvent resistant type ・RoHS2 Compliant Downsized KMQ ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105℃ 160 to 450Vdc ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 160 to 250V 315 to 400V 420 & 450V tanδ(Max.) 0.15 0.15 0.20 Rated voltage (Vdc) 160 to 250V 315 to 400V 420 & 450V Z(-25℃)/Z(+20℃) 4 8 8 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] Negative mark φD+1max. 10 2-φ2 4.0±0.5 L±2.5 Vent Sleeve (PET : Brown) Negative mark PC board pin-out (View from Solder side) 2-1.2×6 φD+1max. Sleeve (PET : Brown) ●Terminal Code : LI (φ35) PC board pin-out (View from Solder side) 4.2±0.5 ●Terminal Code : VS (φ22 to φ35) : Standard Vent 5±0.5 L±2.5 4.5±1 14.2±1 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 E KMR 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100µF:101, 2,700µF:272) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 160V:161, 315V:3B1, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 105℃ KMRSeries ◆STANDARD RATINGS WV (Vdc) 160 180 200 Cap (µF) Case size Rated ripple current φD×L(mm) (Arms/105℃,120Hz) 560 680 820 820 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,500 1,800 1,800 1,800 1,800 2,200 2,200 2,700 2,700 3,300 470 560 680 680 820 820 1,000 1,000 1,000 1,200 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,200 2,200 2,700 560 560 680 680 820 820 820 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,700 22× 25 22 × 30 22 × 35 25.4 × 25 22× 40 25.4× 30 30× 25 22× 45 22× 50 25.4× 35 25.4× 40 25.4× 45 30× 30 35× 25 25.4× 50 30× 35 30× 40 35× 30 30× 45 35× 35 30× 50 35× 40 35× 45 22× 25 22 × 30 22 × 35 25.4 × 25 22 × 40 25.4 × 30 22× 45 25.4× 35 30× 25 22× 50 25.4× 40 30× 30 35× 25 25.4× 45 25.4× 50 30× 35 30× 40 35× 30 30× 45 30× 50 35× 35 35× 40 35× 45 22× 30 25.4 × 25 22 × 35 25.4 × 30 22 × 40 25.4 × 35 30 × 25 22× 50 25.4× 40 30× 30 25.4× 45 30× 35 35× 25 25.4× 50 30× 40 35× 30 30× 45 35× 35 30× 50 35× 40 35× 45 1.58 1.83 2.06 1.89 2.33 2.15 1.90 2.61 2.69 2.45 2.82 2.88 2.39 2.17 3.22 2.73 2.82 2.47 3.23 2.79 3.66 3.23 3.68 1.45 1.66 1.87 1.72 2.11 1.94 2.38 2.24 1.90 2.69 2.52 2.14 1.94 2.88 2.94 2.49 2.82 2.47 3.23 3.31 2.79 2.92 3.33 1.66 1.56 1.87 1.77 2.11 2.03 1.72 2.45 2.30 1.95 2.58 2.23 1.94 2.94 2.58 2.25 2.92 2.53 3.31 2.92 3.33 Part No. EKMR161VSN561MP25S EKMR161VSN681MP30S EKMR161VSN821MP35S EKMR161VSN821MQ25S EKMR161VSN102MP40S EKMR161VSN102MQ30S EKMR161VSN102MR25S EKMR161VSN122MP45S EKMR161VSN122MP50S EKMR161VSN122MQ35S EKMR161VSN152MQ40S EKMR161VSN152MQ45S EKMR161VSN152MR30S EKMR161VSN152MA25S EKMR161VSN182MQ50S EKMR161VSN182MR35S EKMR161VSN182MR40S EKMR161VSN182MA30S EKMR161VSN222MR45S EKMR161VSN222MA35S EKMR161VSN272MR50S EKMR161VSN272MA40S EKMR161VSN332MA45S EKMR181VSN471MP25S EKMR181VSN561MP30S EKMR181VSN681MP35S EKMR181VSN681MQ25S EKMR181VSN821MP40S EKMR181VSN821MQ30S EKMR181VSN102MP45S EKMR181VSN102MQ35S EKMR181VSN102MR25S EKMR181VSN122MP50S EKMR181VSN122MQ40S EKMR181VSN122MR30S EKMR181VSN122MA25S EKMR181VSN152MQ45S EKMR181VSN152MQ50S EKMR181VSN152MR35S EKMR181VSN182MR40S EKMR181VSN182MA30S EKMR181VSN222MR45S EKMR181VSN222MR50S EKMR181VSN222MA35S EKMR181VSN222MA40S EKMR181VSN272MA45S EKMR201VSN561MP30S EKMR201VSN561MQ25S EKMR201VSN681MP35S EKMR201VSN681MQ30S EKMR201VSN821MP40S EKMR201VSN821MQ35S EKMR201VSN821MR25S EKMR201VSN102MP50S EKMR201VSN102MQ40S EKMR201VSN102MR30S EKMR201VSN122MQ45S EKMR201VSN122MR35S EKMR201VSN122MA25S EKMR201VSN152MQ50S EKMR201VSN152MR40S EKMR201VSN152MA30S EKMR201VSN182MR45S EKMR201VSN182MA35S EKMR201VSN222MR50S EKMR201VSN222MA40S EKMR201VSN272MA45S WV (Vdc) 250 315 350 Cap (µF) Case size Rated ripple current φD×L(mm) (Arms/105℃,120Hz) 330 390 470 560 560 560 680 680 820 820 820 820 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,800 2,200 180 220 270 270 330 330 390 390 390 470 470 470 470 560 560 680 680 680 820 820 1,000 1,000 1,200 1,200 150 220 220 270 270 330 330 330 330 390 390 390 390 470 560 560 560 560 680 680 820 22 × 25 22 × 30 22 × 35 22 × 40 25.4 × 30 30 × 25 22 × 45 25.4 × 35 25.4 × 40 25.4 × 45 30 × 30 35 × 25 25.4 × 50 30 × 35 30 × 40 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 22 × 25 22 × 30 22 × 35 25.4 × 25 22 × 40 25.4 × 30 22 × 45 25.4 × 35 30 × 25 22 × 50 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 22 × 25 22 × 30 25.4 × 25 22 × 35 25.4 × 30 22 × 40 22 × 45 25.4 × 35 30 × 25 22 × 50 25.4 × 40 30 × 30 35 × 25 25.4 × 45 25.4 × 50 30 × 35 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 1.21 1.38 1.56 1.74 1.61 1.42 1.97 1.85 2.08 2.13 1.77 1.60 2.40 2.03 2.31 2.38 2.06 2.73 2.41 2.72 3.10 0.91 1.06 1.20 1.15 1.37 1.30 1.52 1.48 1.39 1.72 1.67 1.57 1.52 1.86 1.78 2.10 2.03 1.90 2.31 2.13 2.61 2.46 2.78 2.86 0.84 1.06 1.04 1.20 1.18 1.37 1.40 1.36 1.28 1.56 1.52 1.43 1.38 1.71 1.90 1.78 1.84 1.72 2.10 1.94 2.36 Part No. EKMR251VSN331MP25S EKMR251VSN391MP30S EKMR251VSN471MP35S EKMR251VSN561MP40S EKMR251VSN561MQ30S EKMR251VSN561MR25S EKMR251VSN681MP45S EKMR251VSN681MQ35S EKMR251VSN821MQ40S EKMR251VSN821MQ45S EKMR251VSN821MR30S EKMR251VSN821MA25S EKMR251VSN102MQ50S EKMR251VSN102MR35S EKMR251VSN122MR40S EKMR251VSN122MR45S EKMR251VSN122MA35S EKMR251VSN152MR50S EKMR251VSN152MA40S EKMR251VSN182MA45S EKMR251VSN222MA50S EKMR3B1VSN181MP25S EKMR3B1VSN221MP30S EKMR3B1VSN271MP35S EKMR3B1VSN271MQ25S EKMR3B1VSN331MP40S EKMR3B1VSN331MQ30S EKMR3B1VSN391MP45S EKMR3B1VSN391MQ35S EKMR3B1VSN391MR25S EKMR3B1VSN471MP50S EKMR3B1VSN471MQ40S EKMR3B1VSN471MR30S EKMR3B1VSN471MA25S EKMR3B1VSN561MQ45S EKMR3B1VSN561MR35S EKMR3B1VSN681MQ50S EKMR3B1VSN681MR40S EKMR3B1VSN681MA30S EKMR3B1VSN821MR45S EKMR3B1VSN821MA35S EKMR3B1VSN102MR50S EKMR3B1VSN102MA40S EKMR3B1VSN122MA45S EKMR3B1VSN122MA50S EKMR351VSN151MP25S EKMR351VSN221MP30S EKMR351VSN221MQ25S EKMR351VSN271MP35S EKMR351VSN271MQ30S EKMR351VSN331MP40S EKMR351VSN331MP45S EKMR351VSN331MQ35S EKMR351VSN331MR25S EKMR351VSN391MP50S EKMR351VSN391MQ40S EKMR351VSN391MR30S EKMR351VSN391MA25S EKMR351VSN471MQ45S EKMR351VSN561MQ50S EKMR351VSN561MR35S EKMR351VSN561MR40S EKMR351VSN561MA30S EKMR351VSN681MR45S EKMR351VSN681MA35S EKMR351VSN821MR50S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 105℃ KMRSeries ◆STANDARD RATINGS WV (Vdc) 350 400 420 Cap (µF) Case size φD×L(mm) Rated ripple current (Arms/105℃, 120Hz) Part No. 820 1,000 1,200 120 180 180 220 220 270 270 270 270 330 330 330 330 390 390 470 470 470 560 560 680 680 820 820 1,000 120 150 150 180 180 220 220 220 220 270 35× 40 35× 45 35× 50 22× 25 22 × 30 25.4 × 25 22 × 35 25.4 × 30 22 × 40 22 × 45 25.4 × 35 30 × 25 22 × 50 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 35× 50 22× 25 22 × 30 25.4 × 25 22 × 35 25.4 × 30 22 × 40 22 × 45 25.4 × 35 30 × 25 22 × 50 2.23 2.54 2.86 0.75 0.96 0.94 1.09 1.07 1.24 1.26 1.23 1.16 1.44 1.40 1.31 1.27 1.55 1.49 1.74 1.69 1.58 1.91 1.76 2.15 2.03 2.30 2.37 2.50 0.78 0.91 0.89 1.03 1.00 1.16 1.19 1.16 1.11 1.36 EKMR351VSN821MA40S EKMR351VSN102MA45S EKMR351VSN122MA50S EKMR401VSN121MP25S EKMR401VSN181MP30S EKMR401VSN181MQ25S EKMR401VSN221MP35S EKMR401VSN221MQ30S EKMR401VSN271MP40S EKMR401VSN271MP45S EKMR401VSN271MQ35S EKMR401VSN271MR25S EKMR401VSN331MP50S EKMR401VSN331MQ40S EKMR401VSN331MR30S EKMR401VSN331MA25S EKMR401VSN391MQ45S EKMR401VSN391MR35S EKMR401VSN471MQ50S EKMR401VSN471MR40S EKMR401VSN471MA30S EKMR401VSN561MR45S EKMR401VSN561MA35S EKMR401VSN681MR50S EKMR401VSN681MA40S EKMR401VSN821MA45S EKMR401VSN821MA50S EKMR401VSN102MA50S EKMR421VSN121MP25S EKMR421VSN151MP30S EKMR421VSN151MQ25S EKMR421VSN181MP35S EKMR421VSN181MQ30S EKMR421VSN221MP40S EKMR421VSN221MP45S EKMR421VSN221MQ35S EKMR421VSN221MR25S EKMR421VSN271MP50S WV (Vdc) 420 450 Cap (µF) Case size φD×L(mm) Rated ripple current (Arms/105℃, 120Hz) Part No. 270 270 270 330 330 390 390 390 470 470 560 560 680 820 100 120 150 150 180 180 220 220 220 270 270 270 270 270 330 330 330 390 470 470 470 560 560 680 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 22 × 25 22 × 30 22 × 35 25.4 × 25 22 × 40 25.4 × 30 22 × 45 25.4 × 35 30 × 25 22 × 50 25.4 × 40 25.4 × 45 30 × 30 35 × 25 25.4 × 50 30 × 35 35 × 30 30 × 40 30 × 45 30 × 50 35 × 35 35 × 40 35 × 45 35 × 50 1.32 1.26 1.26 1.49 1.45 1.66 1.63 1.58 1.85 1.77 2.07 2.02 2.29 2.59 0.71 0.82 0.94 0.89 1.05 1.00 1.19 1.16 1.11 1.36 1.32 1.35 1.26 1.26 1.52 1.45 1.45 1.63 1.85 1.90 1.77 2.02 2.08 2.36 EKMR421VSN271MQ40S EKMR421VSN271MR30S EKMR421VSN271MA25S EKMR421VSN331MQ45S EKMR421VSN331MR35S EKMR421VSN391MQ50S EKMR421VSN391MR40S EKMR421VSN391MA30S EKMR421VSN471MR45S EKMR421VSN471MA35S EKMR421VSN561MR50S EKMR421VSN561MA40S EKMR421VSN681MA45S EKMR421VSN821MA50S EKMR451VSN101MP25S EKMR451VSN121MP30S EKMR451VSN151MP35S EKMR451VSN151MQ25S EKMR451VSN181MP40S EKMR451VSN181MQ30S EKMR451VSN221MP45S EKMR451VSN221MQ35S EKMR451VSN221MR25S EKMR451VSN271MP50S EKMR451VSN271MQ40S EKMR451VSN271MQ45S EKMR451VSN271MR30S EKMR451VSN271MA25S EKMR451VSN331MQ50S EKMR451VSN331MR35S EKMR451VSN331MA30S EKMR451VSN391MR40S EKMR451VSN471MR45S EKMR451VSN471MR50S EKMR451VSN471MA35S EKMR451VSN561MA40S EKMR451VSN561MA45S EKMR451VSN681MA50S ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 160 to 250Vdc 315 to 450Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard snap-ins, 105℃ KMQ KMR Series Downsized ・Endurance with ripple current : 2,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant KMQ ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ (35&50Vdc), -25 to +105℃ (160 to 450Vdc) 35&50Vdc, 160 to 450Vdc (at 20℃, 120Hz) ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 5 minutes) Rated voltage (Vdc) 35V 50V 160 to 250V 315 to 400V 420 & 450V Nominal capacitance (µF) 10,000>C C≧10,000 10,000>C C≧10,000 (at 20℃, 120Hz) tanδ(Max.) 0.30 0.35 0.25 0.30 0.15 0.15 0.20 Rated voltage (Vdc) 35&50V 160 to 250V 315 to 450V Z(-25℃)/Z(+20℃) 4 4 8 Z(-40℃)/Z(+20℃) 10 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] ●Terminal Code : VS (φ22 to φ35) : Standard φD+1max. 10 2-φ2 4.0±0.5 L±2 Vent Sleeve (PET : Brown) Negative mark Vent PC board pin-out (View from Solder side) 4.2±0.5 Negative mark 2-1.2×6 φD+1max. Sleeve (PET : Brown) ●Terminal Code : LI (φ35) PC board pin-out (View from Solder side) 5±0.5 L±2 4.5±1 14.2±1 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KMQ A A A V S N A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 68µF:680, 3,300µF:332) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 160V:161, 315V:3B1, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard snap-ins, 105℃ KMQSeries ◆STANDARD RATINGS WV (Vdc) 35 50 160 Cap (µF) 4,700 5,600 5,600 6,800 6,800 8,200 8,200 8,200 10,000 10,000 10,000 12,000 12,000 12,000 12,000 15,000 15,000 15,000 18,000 18,000 18,000 22,000 22,000 27,000 33,000 2,700 3,300 3,300 3,900 3,900 4,700 4,700 4,700 5,600 5,600 5,600 6,800 6,800 6,800 6,800 8,200 8,200 8,200 10,000 10,000 10,000 12,000 12,000 15,000 18,000 470 560 680 680 820 820 820 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,800 Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 22 × 25 22× 25 25.4× 25 22× 30 25.4 ×25 22 ×35 25.4 ×30 30 ×25 22 ×40 25.4 ×35 30 ×25 22 ×50 25.4 ×35 30 ×30 35 ×25 25.4 ×40 30 ×35 35 ×25 25.4 ×50 30 ×40 35 ×30 30 ×50 35 ×35 35 ×40 35 ×50 22 ×25 22 ×30 25.4× 25 22× 30 25.4× 25 22× 35 25.4 ×30 30 ×25 22 ×40 25.4 ×35 30 ×25 22× 50 25.4× 40 30× 30 35× 25 25.4 ×45 30 ×35 35 ×30 25.4 ×50 30 ×40 35 ×30 30 ×50 35 ×35 35 ×40 35 ×50 22 ×25 22 ×30 22 ×30 25.4 ×25 22 ×35 25.4 ×30 30 ×25 22 ×40 25.4 ×35 30× 25 25.4× 40 30× 30 35× 25 25.4 ×45 30 ×35 35 ×30 25.4 ×50 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.87 2.04 2.00 2.36 2.21 2.65 2.49 2.62 3.00 2.88 2.90 3.47 3.15 3.25 3.20 3.61 3.78 3.60 4.14 4.30 4.10 5.00 4.64 5.37 6.00 1.65 1.92 1.76 2.08 2.04 2.43 2.50 2.29 2.63 2.61 2.80 3.05 2.94 3.30 2.77 3.60 3.60 3.60 4.00 4.00 4.00 4.29 4.37 4.50 5.30 1.40 1.50 1.70 1.70 2.00 2.00 2.00 2.20 2.20 2.20 2.30 2.30 2.30 2.50 2.50 2.50 2.70 Part No. EKMQ350VSN472MP25S EKMQ350VSN562MP25S EKMQ350VSN562MQ25S EKMQ350VSN682MP30S EKMQ350VSN682MQ25S EKMQ350VSN822MP35S EKMQ350VSN822MQ30S EKMQ350VSN822MR25S EKMQ350VSN103MP40S EKMQ350VSN103MQ35S EKMQ350VSN103MR25S EKMQ350VSN123MP50S EKMQ350VSN123MQ35S EKMQ350VSN123MR30S EKMQ350VSN123MA25S EKMQ350VSN153MQ40S EKMQ350VSN153MR35S EKMQ350VSN153MA25S EKMQ350VSN183MQ50S EKMQ350VSN183MR40S EKMQ350VSN183MA30S EKMQ350VSN223MR50S EKMQ350VSN223MA35S EKMQ350VSN273MA40S EKMQ350VSN333MA50S EKMQ500VSN272MP25S EKMQ500VSN332MP30S EKMQ500VSN332MQ25S EKMQ500VSN392MP30S EKMQ500VSN392MQ25S EKMQ500VSN472MP35S EKMQ500VSN472MQ30S EKMQ500VSN472MR25S EKMQ500VSN562MP40S EKMQ500VSN562MQ35S EKMQ500VSN562MR25S EKMQ500VSN682MP50S EKMQ500VSN682MQ40S EKMQ500VSN682MR30S EKMQ500VSN682MA25S EKMQ500VSN822MQ45S EKMQ500VSN822MR35S EKMQ500VSN822MA30S EKMQ500VSN103MQ50S EKMQ500VSN103MR40S EKMQ500VSN103MA30S EKMQ500VSN123MR50S EKMQ500VSN123MA35S EKMQ500VSN153MA40S EKMQ500VSN183MA50S EKMQ161VSN471MP25S EKMQ161VSN561MP30S EKMQ161VSN681MP30S EKMQ161VSN681MQ25S EKMQ161VSN821MP35S EKMQ161VSN821MQ30S EKMQ161VSN821MR25S EKMQ161VSN102MP40S EKMQ161VSN102MQ35S EKMQ161VSN102MR25S EKMQ161VSN122MQ40S EKMQ161VSN122MR30S EKMQ161VSN122MA25S EKMQ161VSN152MQ45S EKMQ161VSN152MR35S EKMQ161VSN152MA30S EKMQ161VSN182MQ50S WV (Vdc) 160 180 200 250 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 1,800 1,800 2,200 2,200 2,700 2,700 3,300 390 470 560 560 680 680 820 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,700 390 470 560 560 680 680 820 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,800 1,800 2,200 220 270 330 330 390 390 470 470 470 560 560 560 680 680 680 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 50 22 × 25 22 × 30 22 × 30 25.4 × 25 22 × 35 25.4 × 30 22 × 40 25.4 × 30 30 × 25 22 × 45 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 35 × 30 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 50 22 × 25 22 × 30 22 × 30 25.4 × 25 22 × 40 25.4 × 30 22 × 45 25.4 × 35 30 × 25 22 × 50 25.4 × 45 30 × 30 35 × 25 25.4 × 50 30 × 35 35 × 30 30 × 40 35 × 30 30 × 45 35 × 40 35 × 45 22 × 25 22 × 25 22 × 30 25.4 × 25 22 × 35 25.4 × 25 22 × 40 25.4 × 30 30 × 25 22 × 45 25.4 × 35 30 × 25 22 × 50 25.4 × 40 30 × 30 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 2.70 2.70 2.90 2.90 3.10 3.10 3.30 1.30 1.40 1.50 1.50 1.70 1.70 2.00 2.00 2.00 2.20 2.20 2.20 2.20 2.30 2.30 2.30 2.50 2.50 2.50 2.70 2.70 2.90 2.90 3.10 1.31 1.45 1.67 1.67 1.75 1.75 2.04 2.04 2.04 2.30 2.30 2.30 2.30 2.65 2.65 2.65 2.80 2.80 3.08 3.08 3.48 1.00 1.10 1.20 1.20 1.30 1.30 1.40 1.40 1.40 1.50 1.50 1.50 1.70 1.70 1.70 Part No. EKMQ161VSN182MR40S EKMQ161VSN182MA30S EKMQ161VSN222MR45S EKMQ161VSN222MA35S EKMQ161VSN272MR50S EKMQ161VSN272MA40S EKMQ161VSN332MA50S EKMQ181VSN391MP25S EKMQ181VSN471MP30S EKMQ181VSN561MP30S EKMQ181VSN561MQ25S EKMQ181VSN681MP35S EKMQ181VSN681MQ30S EKMQ181VSN821MP40S EKMQ181VSN821MQ30S EKMQ181VSN821MR25S EKMQ181VSN102MP45S EKMQ181VSN102MQ40S EKMQ181VSN102MR30S EKMQ181VSN102MA25S EKMQ181VSN122MQ45S EKMQ181VSN122MR35S EKMQ181VSN122MA30S EKMQ181VSN152MQ50S EKMQ181VSN152MR40S EKMQ181VSN152MA30S EKMQ181VSN182MR45S EKMQ181VSN182MA35S EKMQ181VSN222MR50S EKMQ181VSN222MA40S EKMQ181VSN272MA50S EKMQ201VSN391MP25S EKMQ201VSN471MP30S EKMQ201VSN561MP30S EKMQ201VSN561MQ25S EKMQ201VSN681MP40S EKMQ201VSN681MQ30S EKMQ201VSN821MP45S EKMQ201VSN821MQ35S EKMQ201VSN821MR25S EKMQ201VSN102MP50S EKMQ201VSN102MQ45S EKMQ201VSN102MR30S EKMQ201VSN102MA25S EKMQ201VSN122MQ50S EKMQ201VSN122MR35S EKMQ201VSN122MA30S EKMQ201VSN152MR40S EKMQ201VSN152MA30S EKMQ201VSN182MR45S EKMQ201VSN182MA40S EKMQ201VSN222MA45S EKMQ251VSN221MP25S EKMQ251VSN271MP25S EKMQ251VSN331MP30S EKMQ251VSN331MQ25S EKMQ251VSN391MP35S EKMQ251VSN391MQ25S EKMQ251VSN471MP40S EKMQ251VSN471MQ30S EKMQ251VSN471MR25S EKMQ251VSN561MP45S EKMQ251VSN561MQ35S EKMQ251VSN561MR25S EKMQ251VSN681MP50S EKMQ251VSN681MQ40S EKMQ251VSN681MR30S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard snap-ins, 105℃ KMQSeries ◆STANDARD RATINGS WV (Vdc) 250 315 350 400 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 680 820 820 820 1,000 1,000 1,200 1,200 1,500 1,800 150 180 220 220 270 270 330 330 330 390 390 390 390 470 470 470 560 560 560 680 680 820 820 1,000 120 150 180 180 220 220 270 270 270 330 330 330 390 390 470 470 470 560 560 680 680 820 100 120 150 150 180 180 220 220 220 270 35 ×25 25.4 ×45 30 × 35 35 × 30 30 × 40 35 × 30 30 × 45 35 × 35 35 × 45 35 × 50 22× 25 22× 30 22 ×30 25.4 ×25 22 ×35 25.4 ×30 22 ×45 25.4 × 35 30 × 25 22× 45 25.4× 40 30 ×30 35 ×25 25.4 ×45 30 ×35 35 ×25 25.4 × 50 30× 40 35× 30 30× 45 35 ×35 30 ×50 35 ×40 35 ×45 22 ×25 22 ×30 22 × 30 25.4× 25 22× 35 25.4× 30 22 ×40 25.4 ×30 30 ×25 22 ×45 25.4 ×40 30 × 30 25.4× 45 30× 35 25.4× 50 30 ×35 35 ×30 30 ×45 35 ×35 30 × 50 35 × 40 35× 45 22× 25 22 ×30 22 ×30 25.4 ×25 22 ×35 25.4 ×30 22 × 45 25.4× 35 30× 25 22× 50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.70 2.00 2.00 2.00 2.20 2.20 2.30 2.30 2.50 2.70 0.82 0.90 1.00 1.00 1.10 1.10 1.20 1.20 1.20 1.30 1.30 1.30 1.30 1.40 1.40 1.40 1.50 1.50 1.50 1.70 1.70 2.00 2.00 2.30 0.75 0.82 0.90 0.90 1.00 1.00 1.10 1.10 1.10 1.20 1.20 1.20 1.30 1.30 1.40 1.40 1.40 1.50 1.50 1.70 1.70 1.90 0.70 0.75 0.88 0.88 0.95 0.95 1.10 1.10 1.10 1.22 Part No. EKMQ251VSN681MA25S EKMQ251VSN821MQ45S EKMQ251VSN821MR35S EKMQ251VSN821MA30S EKMQ251VSN102MR40S EKMQ251VSN102MA30S EKMQ251VSN122MR45S EKMQ251VSN122MA35S EKMQ251VSN152MA45S EKMQ251VSN182MA50S EKMQ3B1VSN151MP25S EKMQ3B1VSN181MP30S EKMQ3B1VSN221MP30S EKMQ3B1VSN221MQ25S EKMQ3B1VSN271MP35S EKMQ3B1VSN271MQ30S EKMQ3B1VSN331MP45S EKMQ3B1VSN331MQ35S EKMQ3B1VSN331MR25S EKMQ3B1VSN391MP45S EKMQ3B1VSN391MQ40S EKMQ3B1VSN391MR30S EKMQ3B1VSN391MA25S EKMQ3B1VSN471MQ45S EKMQ3B1VSN471MR35S EKMQ3B1VSN471MA25S EKMQ3B1VSN561MQ50S EKMQ3B1VSN561MR40S EKMQ3B1VSN561MA30S EKMQ3B1VSN681MR45S EKMQ3B1VSN681MA35S EKMQ3B1VSN821MR50S EKMQ3B1VSN821MA40S EKMQ3B1VSN102MA45S EKMQ351VSN121MP25S EKMQ351VSN151MP30S EKMQ351VSN181MP30S EKMQ351VSN181MQ25S EKMQ351VSN221MP35S EKMQ351VSN221MQ30S EKMQ351VSN271MP40S EKMQ351VSN271MQ30S EKMQ351VSN271MR25S EKMQ351VSN331MP45S EKMQ351VSN331MQ40S EKMQ351VSN331MR30S EKMQ351VSN391MQ45S EKMQ351VSN391MR35S EKMQ351VSN471MQ50S EKMQ351VSN471MR35S EKMQ351VSN471MA30S EKMQ351VSN561MR45S EKMQ351VSN561MA35S EKMQ351VSN681MR50S EKMQ351VSN681MA40S EKMQ351VSN821MA45S EKMQ401VSN101MP25S EKMQ401VSN121MP30S EKMQ401VSN151MP30S EKMQ401VSN151MQ25S EKMQ401VSN181MP35S EKMQ401VSN181MQ30S EKMQ401VSN221MP45S EKMQ401VSN221MQ35S EKMQ401VSN221MR25S EKMQ401VSN271MP50S WV (Vdc) 400 420 450 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 270 270 270 330 330 330 390 390 390 470 470 560 560 680 82 100 100 120 120 150 150 150 180 180 180 220 220 220 220 270 270 270 330 330 330 390 390 470 470 560 680 68 82 100 100 120 120 150 150 150 180 180 180 220 220 220 270 270 270 330 330 390 390 470 560 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 35 × 30 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 22× 25 22 × 25 25.4 × 25 22 × 30 25.4 × 25 22 × 35 25.4 × 30 30 × 25 22 × 40 25.4 × 30 30 × 25 22 × 45 25.4 × 35 30 × 30 35 × 25 25.4 × 40 30 × 30 35 × 25 25.4 × 50 30 × 35 35 × 30 30 × 40 35 × 35 30 × 45 35 × 40 35 × 45 35 × 50 22 × 25 22 × 30 22 × 30 25.4 × 25 22 × 35 25.4 × 30 22 × 40 25.4 × 30 30 × 25 22 × 45 25.4 × 40 30 × 30 25.4 × 45 30 × 30 35 × 25 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.22 1.22 1.22 1.44 1.44 1.44 1.55 1.55 1.55 1.68 1.68 1.90 1.90 2.12 0.64 0.66 0.66 0.81 0.81 0.84 0.84 0.84 0.91 0.91 0.91 1.05 1.05 1.05 1.05 1.25 1.25 1.25 1.42 1.42 1.42 1.61 1.61 1.86 1.86 2.10 2.20 0.50 0.56 0.64 0.64 0.72 0.72 0.79 0.79 0.79 0.87 0.87 0.87 1.00 1.00 1.00 1.19 1.19 1.19 1.38 1.38 1.55 1.55 1.74 1.90 Part No. EKMQ401VSN271MQ40S EKMQ401VSN271MR30S EKMQ401VSN271MA25S EKMQ401VSN331MQ45S EKMQ401VSN331MR35S EKMQ401VSN331MA30S EKMQ401VSN391MQ50S EKMQ401VSN391MR40S EKMQ401VSN391MA30S EKMQ401VSN471MR45S EKMQ401VSN471MA35S EKMQ401VSN561MR50S EKMQ401VSN561MA40S EKMQ401VSN681MA45S EKMQ421VSN820MP25S EKMQ421VSN101MP25S EKMQ421VSN101MQ25S EKMQ421VSN121MP30S EKMQ421VSN121MQ25S EKMQ421VSN151MP35S EKMQ421VSN151MQ30S EKMQ421VSN151MR25S EKMQ421VSN181MP40S EKMQ421VSN181MQ30S EKMQ421VSN181MR25S EKMQ421VSN221MP45S EKMQ421VSN221MQ35S EKMQ421VSN221MR30S EKMQ421VSN221MA25S EKMQ421VSN271MQ40S EKMQ421VSN271MR30S EKMQ421VSN271MA25S EKMQ421VSN331MQ50S EKMQ421VSN331MR35S EKMQ421VSN331MA30S EKMQ421VSN391MR40S EKMQ421VSN391MA35S EKMQ421VSN471MR45S EKMQ421VSN471MA40S EKMQ421VSN561MA45S EKMQ421VSN681MA50S EKMQ451VSN680MP25S EKMQ451VSN820MP30S EKMQ451VSN101MP30S EKMQ451VSN101MQ25S EKMQ451VSN121MP35S EKMQ451VSN121MQ30S EKMQ451VSN151MP40S EKMQ451VSN151MQ30S EKMQ451VSN151MR25S EKMQ451VSN181MP45S EKMQ451VSN181MQ40S EKMQ451VSN181MR30S EKMQ451VSN221MQ45S EKMQ451VSN221MR30S EKMQ451VSN221MA25S EKMQ451VSN271MQ50S EKMQ451VSN271MR40S EKMQ451VSN271MA30S EKMQ451VSN331MR45S EKMQ451VSN331MA35S EKMQ451VSN391MR50S EKMQ451VSN391MA40S EKMQ451VSN471MA45S EKMQ451VSN561MA50S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard snap-ins, 105℃ KMQSeries ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 35, 50Vdc 160 to 250Vdc 315 to 450Vdc 50 0.95 0.81 0.77 120 1.00 1.00 1.00 300 1.03 1.17 1.16 1k 1.05 1.32 1.30 10k 1.08 1.45 1.41 50k 1.08 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS RLB Series High ripple snap-ins, 85℃ RLB ・Endurance with ripple current : 5,000 hours at 85℃ ・High ripple current capability in a commercial frequency range ・High ripple current for inverter control like air conditioner ・Rated voltage range : 180 to 250Vdc, Capacitance range : 600 to 2,200μF ・Non solvent resistant type ・RoHS2 Compliant Longer life RLA ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85℃ 180 to 250V ±10% (K) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 180 to 250V tanδ (Max.) 0.15 Rated voltage (Vdc) 180 to 250V Z(-25℃)/Z(+20℃) 4 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 85℃. Capacitance change ≦±20% of the initial value D. F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 85℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D. F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] Negative mark PC board pin-out (View from Solder side) φD+1max. 5±0.5 4.5±1 L±2.5 Vent 14.2±1 Sleeve (PVC : Black) Negative mark Vent PC board pin-out (View from Solder side) 10 2-1.2×6 ●Terminal Code : VS (φ30, φ35) φD+1max. Sleeve (PVC : Black) 4.2±0.5 ●Terminal Code : LI (φ30, φ35) : Standard L±2.5 4.0±0.5 2-φ2 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E RLB AAA L I N AAA K AAA M Supplement code Size code Capacitance tolerance code Capacitance code (ex .800µF:801, 2,200µF:222) Dummy terminal code Terminal code ( LI,VS) Voltage code (ex.180V:181, 200V:201) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS High ripple snap-ins, 85℃ RLBSeries ◆STANDARD RATINGS WV (Vdc) 180 200 210 Cap (µF) Rated ripple Case size current tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 900 1,100 1,300 1,500 1,500 1,700 1,800 2,000 900 1,000 1,200 1,200 1,400 1,400 1,500 1,600 1,900 2,200 800 900 1,100 1,100 1,200 1,300 30 ×35 30× 40 30× 45 30× 50 35 ×40 30 ×55 35 ×45 35 ×50 30 ×35 30 ×40 30× 45 35× 35 30× 50 35× 40 30 ×55 35 ×45 35 ×50 35 ×55 30 ×35 30 ×40 30 ×45 35× 35 30× 50 35× 40 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 4.66 5.17 5.64 6.07 5.75 6.63 6.37 6.84 4.66 5.01 5.51 5.14 5.95 5.66 6.36 6.14 6.82 7.60 4.48 4.86 5.39 5.06 5.71 5.65 Part No. ERLB181LIN901KR35M ERLB181LIN112KR40M ERLB181LIN132KR45M ERLB181LIN152KR50M ERLB181LIN152KA40M ERLB181LIN172KR55M ERLB181LIN182KA45M ERLB181LIN202KA50M ERLB201LIN901KR35M ERLB201LIN102KR40M ERLB201LIN122KR45M ERLB201LIN122KA35M ERLB201LIN142KR50M ERLB201LIN142KA40M ERLB201LIN152KR55M ERLB201LIN162KA45M ERLB201LIN192KA50M ERLB201LIN222KA55M ERLB211LIN801KR35M ERLB211LIN901KR40M ERLB211LIN112KR45M ERLB211LIN112KA35M ERLB211LIN122KR50M ERLB211LIN132KA40M WV (Vdc) 210 220 250 Cap (µF) 1,400 1,500 1,700 2,000 700 900 1,000 1,000 1,200 1,200 1,300 1,400 1,600 1,800 600 800 900 900 1,000 1,100 1,200 1,200 1,400 1,600 Rated ripple Case size current tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 30 × 55 35 × 45 35 × 50 35 × 55 30 × 35 30 × 40 30 × 45 35 × 35 30 × 50 35 × 40 30 × 55 35 × 45 35 × 50 35 × 55 30 × 35 30 × 40 30 × 45 35 × 35 30 × 50 35 × 40 30 × 55 35 × 45 35 × 50 35 × 55 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 6.31 6.21 6.82 7.62 4.27 4.85 5.19 4.87 5.68 5.44 6.09 5.96 6.51 7.10 4.03 4.66 5.01 4.73 5.32 5.33 5.96 5.68 6.25 6.87 Part No. ERLB211LIN142KR55M ERLB211LIN152KA45M ERLB211LIN172KA50M ERLB211LIN202KA55M ERLB221LIN701KR35M ERLB221LIN901KR40M ERLB221LIN102KR45M ERLB221LIN102KA35M ERLB221LIN122KR50M ERLB221LIN122KA40M ERLB221LIN132KR55M ERLB221LIN142KA45M ERLB221LIN162KA50M ERLB221LIN182KA55M ERLB251LIN601KR35M ERLB251LIN801KR40M ERLB251LIN901KR45M ERLB251LIN901KA35M ERLB251LIN102KR50M ERLB251LIN112KA40M ERLB251LIN122KR55M ERLB251LIN122KA45M ERLB251LIN142KA50M ERLB251LIN162KA55M ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 180 to 250Vdc 50 0.70 120 1.00 300 1.17 1k 1.32 10k 1.45 50k 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS RLA High ripple snap-ins, 85℃ Series RLB ・Endurance with ripple current : 3,000 hours at 85℃ ・High ripple current capability in a commercial frequency range ・High ripple current for inverter control like air conditioner ・Rated voltage range : 180 to 250Vdc, Capacitance range : 600 to 2,200μF ・Non solvent resistant type ・RoHS2 Compliant Longer life RLA ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85℃ 180 to 250V ±10% (K) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 180 to 250V tanδ (Max.) 0.15 Rated voltage (Vdc) 180 to 250V Z(-25℃)/Z(+20℃) 4 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 3,000 hours at 85℃. Capacitance change ≦±20% of the initial value D. F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 85℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D. F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] ●Terminal Code : LI (φ30, φ35) : Standard φD+1max. 5±0.5 4.5±1 L±2.5 Vent 14.2±1 Negative mark Vent PC board pin-out (View from Solder side) 10 2-1.2×6 Sleeve (PVC : Black) φD+1max. Negative mark 4.2±0.5 Sleeve (PVC : Black) ●Terminal Code : VS (φ30, φ35) PC board pin-out (View from Solder side) 2-φ2 L±2.5 4.0±0.5 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E RLA AAA L I N AAA K AAA M Supplement code Size code Capacitance tolerance code Capacitance code (ex .800µF:801, 2,200µF:222) Dummy terminal code Terminal code ( LI,VS) Voltage code (ex.180V:181, 200V:201) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS High ripple snap-ins, 85℃ RLASeries ◆STANDARD RATINGS WV (Vdc) 180 200 210 Cap (µF) Rated ripple Case size current tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 900 1,100 1,300 1,500 1,500 1,700 1,800 2,000 900 1,000 1,200 1,200 1,400 1,400 1,500 1,600 1,900 2,200 800 900 1,100 1,100 1,200 1,300 30 ×35 30× 40 30× 45 30× 50 35 ×40 30 ×55 35 ×45 35 ×50 30 ×35 30 ×40 30× 45 35× 35 30× 50 35× 40 30 ×55 35 ×45 35 ×50 35 ×55 30 ×35 30 ×40 30 ×45 35× 35 30× 50 35× 40 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 4.66 5.17 5.64 6.07 5.75 6.63 6.37 6.84 4.66 5.01 5.51 5.14 5.95 5.66 6.36 6.14 6.82 7.60 4.48 4.86 5.39 5.06 5.71 5.65 Part No. ERLA181LIN901KR35M ERLA181LIN112KR40M ERLA181LIN132KR45M ERLA181LIN152KR50M ERLA181LIN152KA40M ERLA181LIN172KR55M ERLA181LIN182KA45M ERLA181LIN202KA50M ERLA201LIN901KR35M ERLA201LIN102KR40M ERLA201LIN122KR45M ERLA201LIN122KA35M ERLA201LIN142KR50M ERLA201LIN142KA40M ERLA201LIN152KR55M ERLA201LIN162KA45M ERLA201LIN192KA50M ERLA201LIN222KA55M ERLA211LIN801KR35M ERLA211LIN901KR40M ERLA211LIN112KR45M ERLA211LIN112KA35M ERLA211LIN122KR50M ERLA211LIN132KA40M WV (Vdc) 210 220 250 Cap (µF) 1,400 1,500 1,700 2,000 700 900 1,000 1,000 1,200 1,200 1,300 1,400 1,600 1,800 600 800 900 900 1,000 1,100 1,200 1,200 1,400 1,600 Rated ripple Case size current tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 30 × 55 35 × 45 35 × 50 35 × 55 30 × 35 30 × 40 30 × 45 35 × 35 30 × 50 35 × 40 30 × 55 35 × 45 35 × 50 35 × 55 30 × 35 30 × 40 30 × 45 35 × 35 30 × 50 35 × 40 30 × 55 35 × 45 35 × 50 35 × 55 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 6.31 6.21 6.82 7.62 4.27 4.85 5.19 4.87 5.68 5.44 6.09 5.96 6.51 7.10 4.03 4.66 5.01 4.73 5.32 5.33 5.96 5.68 6.25 6.87 Part No. ERLA211LIN142KR55M ERLA211LIN152KA45M ERLA211LIN172KA50M ERLA211LIN202KA55M ERLA221LIN701KR35M ERLA221LIN901KR40M ERLA221LIN102KR45M ERLA221LIN102KA35M ERLA221LIN122KR50M ERLA221LIN122KA40M ERLA221LIN132KR55M ERLA221LIN142KA45M ERLA221LIN162KA50M ERLA221LIN182KA55M ERLA251LIN601KR35M ERLA251LIN801KR40M ERLA251LIN901KR45M ERLA251LIN901KA35M ERLA251LIN102KR50M ERLA251LIN112KA40M ERLA251LIN122KR55M ERLA251LIN122KA45M ERLA251LIN142KA50M ERLA251LIN162KA55M ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 180 to 250Vdc 50 0.70 120 1.00 300 1.17 1k 1.32 10k 1.45 50k 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KLA Series High ripple snap-ins, 105℃ KLA ・Endurance with ripple current : 3,000 hours at 105℃ ・High ripple current capability in a commercial frequency range ・High ripple current for inverter control like air conditioner ・Rated voltage range : 180 to 250Vdc, Capacitance range : 600 to 2,000μF ・Non solvent resistant type ・RoHS2 Compliant Higher temperature RLA ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 180 to 250V ±10% (K) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 180 to 250V tanδ (Max.) 0.15 Rated voltage (Vdc) 180 to 250V Z(-40℃)/Z(+20℃) 4 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 3,000 hours at 105℃. Capacitance change ≦±20% of the initial value D. F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D. F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] ●Terminal Code : LI (φ30, φ35) : Standard φD+1max. 5±0.5 4.5±1 L±2.5 Vent 14.2±1 Negative mark Vent PC board pin-out (View from Solder side) 10 2-1.2×6 Sleeve (PVC : Brown) φD+1max. Negative mark 4.2±0.5 Sleeve (PVC : Brown) ●Terminal Code : VS (φ30, φ35) PC board pin-out (View from Solder side) 2-φ2 L±2.5 4.0±0.5 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KLA AAA L I N AAA K AAA M Supplement code Size code Capacitance tolerance code Capacitance code (ex .800µF:801, 1,200µF:122) Dummy terminal code Terminal code ( LI,VS) Voltage code (ex.180V:181, 200V:201) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS High ripple snap-ins, 105℃ KLASeries ◆STANDARD RATINGS WV (Vdc) 180 200 210 Cap (µF) Rated ripple current Case size tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 900 1,100 1,300 1,500 1,500 1,700 1,800 2,000 800 1,000 1,100 1,100 1,300 1,400 1,500 1,600 1,800 2,000 700 900 1,000 1,100 1,200 1,300 30 ×35 30 × 39 30× 45 30× 51 35× 39 30 ×54 35 ×45 35 ×51 30 ×35 30 ×39 30 ×45 35× 35 30× 51 35× 39 30× 54 35 ×45 35 ×51 35 ×54 30 ×35 30 ×39 35 ×35 30 ×45 30× 51 35× 39 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 3.76 4.17 4.55 4.89 4.64 5.35 5.14 5.51 3.54 4.04 4.25 3.97 4.62 4.56 5.13 4.95 5.35 5.84 3.38 3.92 3.89 4.35 4.60 4.56 Part No. EKLA181LIN901KR35M EKLA181LIN112KR39M EKLA181LIN132KR45M EKLA181LIN152KR51M EKLA181LIN152KA39M EKLA181LIN172KR54M EKLA181LIN182KA45M EKLA181LIN202KA51M EKLA201LIN801KR35M EKLA201LIN102KR39M EKLA201LIN112KR45M EKLA201LIN112KA35M EKLA201LIN132KR51M EKLA201LIN142KA39M EKLA201LIN152KR54M EKLA201LIN162KA45M EKLA201LIN182KA51M EKLA201LIN202KA54M EKLA211LIN701KR35M EKLA211LIN901KR39M EKLA211LIN102KA35M EKLA211LIN112KR45M EKLA211LIN122KR51M EKLA211LIN132KA39M WV (Vdc) 210 220 250 Cap (µF) 1,400 1,500 1,700 1,900 700 900 1,000 1,000 1,200 1,200 1,300 1,400 1,600 1,900 600 700 900 900 1,000 1,000 1,100 1,200 1,400 1,600 Rated ripple current Case size tanδ (mArms/ φD×L(mm) 105℃, 120Hz) 30 × 54 35 × 45 35 × 51 35 × 54 30 × 35 30 × 39 30 × 45 35 × 35 30 × 51 35 × 39 30 × 54 35 × 45 35 × 51 35 × 54 30 × 35 30 × 39 30 × 45 35 × 35 30 × 51 35 × 39 30 × 54 35 × 45 35 × 51 35 × 54 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 5.09 5.01 5.50 5.99 3.44 3.91 4.18 3.93 4.58 4.39 4.91 4.81 5.25 5.88 3.25 3.51 4.04 3.81 4.29 4.10 4.60 4.58 5.04 5.54 Part No. EKLA211LIN142KR54M EKLA211LIN152KA45M EKLA211LIN172KA51M EKLA211LIN192KA54M EKLA221LIN701KR35M EKLA221LIN901KR39M EKLA221LIN102KR45M EKLA221LIN102KA35M EKLA221LIN122KR51M EKLA221LIN122KA39M EKLA221LIN132KR54M EKLA221LIN142KA45M EKLA221LIN162KA51M EKLA221LIN192KA54M EKLA251LIN601KR35M EKLA251LIN701KR39M EKLA251LIN901KR45M EKLA251LIN901KA35M EKLA251LIN102KR51M EKLA251LIN102KA39M EKLA251LIN112KR54M EKLA251LIN122KA45M EKLA251LIN142KA51M EKLA251LIN162KA54M ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 180 to 250Vdc 50 0.70 120 1.00 300 1.17 1k 1.32 10k 1.45 50k 1.50 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS SMM Series Long life snap-ins, 85℃ SMM ・Longer life from SMQ series ・Endurance with ripple current : 3,000 hours at 85℃ ・Non solvent resistant type ・RoHS2 Compliant Longer life SMQ ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +85℃ 160 to 450Vdc ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 160 to 400V 420 & 450V tanδ (Max.) 0.15 0.20 Rated voltage (Vdc) 160 to 400V 420 & 450V Z(-25℃)/Z(+20℃) 4 8 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 3,000 hours at 85℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 85℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] ●Terminal Code : VS (φ22 to φ35) : Standard φD+1max. 10 2-φ2 *4.0±0.5 L±2 Vent Sleeve (PET : Black) Negative mark Vent PC board pin-out (View from Solder side) 4.2±0.5 Negative mark 2-1.2×6 φD+1max. Sleeve (PET : Black) ●Terminal Code : LI (φ35) PC board pin-out (View from Solder side) 5±0.5 L±2 4.5±1 14.2±1 *φD=35mm : 3.5±0.5mm The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E S MM A A A V S N A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 330µF:331, 3,300µF:332) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 160V:161, 315V:3B1, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 160 to 250Vdc 315 to 450Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 85℃ SMMSeries ◆STANDARD RATINGS WV (Vdc) 160 180 200 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 270 390 390 470 470 560 560 560 680 680 680 680 820 820 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,700 3,300 220 330 330 390 470 470 470 560 560 680 680 680 680 820 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,800 1,800 2,200 2,700 220 270 270 330 330 22 ×20 22 ×25 25.4 × 20 22 × 30 25.4× 25 22× 30 25.4 ×25 30 ×20 22 ×35 25.4 ×30 30 ×25 35 × 20 22 × 40 25.4× 30 30× 25 35 ×20 22 ×45 25.4 ×35 30 ×30 35 × 25 22 × 50 25.4 × 40 30 × 30 35 ×25 25.4 ×50 30 ×35 35 ×30 30 ×40 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 22 × 20 22× 25 25.4× 20 22 ×25 22 ×30 25.4 ×25 30 ×20 22 ×35 25.4 × 25 22 × 35 25.4× 30 30× 25 35 ×20 22 ×40 25.4 ×35 30 ×25 22 ×50 25.4 ×40 30 ×30 35 ×25 25.4 ×45 30 ×35 35 ×30 30 ×40 35 ×35 30 × 45 35 × 35 35 × 40 35 × 50 22 × 20 22 × 25 25.4 × 20 22× 25 25.4× 20 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.30 1.63 1.62 1.86 1.86 2.15 2.15 2.05 2.35 2.33 2.33 2.26 2.68 2.65 2.64 2.49 3.02 3.00 2.96 3.13 3.47 3.43 3.41 3.40 3.96 3.96 3.94 4.31 4.28 4.96 4.96 5.57 6.21 1.18 1.77 1.49 1.84 1.91 2.08 1.88 2.25 2.25 2.48 2.50 2.46 2.26 2.86 2.75 2.69 3.10 3.06 3.10 2.98 3.63 3.55 3.49 4.10 4.02 4.55 4.54 4.83 5.30 1.18 1.37 1.35 1.51 1.49 Part No. ESMM161VSN271MP20S ESMM161VSN391MP25S ESMM161VSN391MQ20S ESMM161VSN471MP30S ESMM161VSN471MQ25S ESMM161VSN561MP30S ESMM161VSN561MQ25S ESMM161VSN561MR20S ESMM161VSN681MP35S ESMM161VSN681MQ30S ESMM161VSN681MR25S ESMM161VSN681MA20S ESMM161VSN821MP40S ESMM161VSN821MQ30S ESMM161VSN821MR25S ESMM161VSN821MA20S ESMM161VSN102MP45S ESMM161VSN102MQ35S ESMM161VSN102MR30S ESMM161VSN102MA25S ESMM161VSN122MP50S ESMM161VSN122MQ40S ESMM161VSN122MR30S ESMM161VSN122MA25S ESMM161VSN152MQ50S ESMM161VSN152MR35S ESMM161VSN152MA30S ESMM161VSN182MR40S ESMM161VSN182MA35S ESMM161VSN222MR50S ESMM161VSN222MA40S ESMM161VSN272MA45S ESMM161VSN332MA50S ESMM181VSN221MP20S ESMM181VSN331MP25S ESMM181VSN331MQ20S ESMM181VSN391MP25S ESMM181VSN471MP30S ESMM181VSN471MQ25S ESMM181VSN471MR20S ESMM181VSN561MP35S ESMM181VSN561MQ25S ESMM181VSN681MP35S ESMM181VSN681MQ30S ESMM181VSN681MR25S ESMM181VSN681MA20S ESMM181VSN821MP40S ESMM181VSN821MQ35S ESMM181VSN821MR25S ESMM181VSN102MP50S ESMM181VSN102MQ40S ESMM181VSN102MR30S ESMM181VSN102MA25S ESMM181VSN122MQ45S ESMM181VSN122MR35S ESMM181VSN122MA30S ESMM181VSN152MR40S ESMM181VSN152MA35S ESMM181VSN182MR45S ESMM181VSN182MA35S ESMM181VSN222MA40S ESMM181VSN272MA50S ESMM201VSN221MP20S ESMM201VSN271MP25S ESMM201VSN271MQ20S ESMM201VSN331MP25S ESMM201VSN331MQ20S WV (Vdc) 200 220 250 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 390 390 390 470 470 470 560 560 560 560 680 680 680 680 820 820 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,800 1,800 2,200 180 270 270 330 330 330 390 390 390 470 470 470 470 560 560 560 560 680 680 680 680 820 820 820 1,000 1,000 1,000 1,200 1,200 1,500 1,500 1,800 150 180 220 220 270 22 × 30 25.4 × 25 30 × 20 22 × 30 25.4 × 25 30 × 20 22 × 35 25.4 × 30 30 × 25 35 × 20 22 × 40 25.4 × 30 30 × 25 35 × 20 22 × 45 25.4 × 35 30 × 30 35 × 25 22 × 50 25.4 × 40 30 × 35 35 × 30 25.4 × 45 30 × 35 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 22 × 20 22 × 25 25.4 × 20 22 × 30 25.4 × 25 30 × 20 22 × 30 25.4 × 25 30 × 20 22 × 35 25.4 × 30 30 × 25 35 × 20 22 × 40 25.4 × 35 30 × 25 35 × 20 22 × 45 25.4 × 35 30 × 30 35 × 25 25.4 × 45 30 × 35 35 × 30 25.4 × 50 30 × 35 35 × 30 30 × 40 35 × 35 30 × 50 35 × 40 35 × 45 22 × 20 22 × 20 22 × 25 25.4 × 20 22 × 25 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.73 1.71 1.71 1.97 1.95 1.88 2.18 2.15 2.15 2.05 2.48 2.48 2.48 2.36 2.81 2.79 2.80 2.83 3.28 3.28 3.15 3.26 3.61 3.61 3.57 4.13 4.06 4.60 4.59 5.25 1.06 1.47 1.35 1.70 1.69 1.58 1.89 1.84 1.71 2.08 2.08 2.12 1.88 2.33 2.38 2.31 2.14 2.63 2.68 2.62 2.58 3.01 2.99 2.79 3.40 3.42 3.29 3.88 3.68 4.44 4.10 4.52 0.97 1.06 1.24 1.22 1.50 Part No. ESMM201VSN391MP30S ESMM201VSN391MQ25S ESMM201VSN391MR20S ESMM201VSN471MP30S ESMM201VSN471MQ25S ESMM201VSN471MR20S ESMM201VSN561MP35S ESMM201VSN561MQ30S ESMM201VSN561MR25S ESMM201VSN561MA20S ESMM201VSN681MP40S ESMM201VSN681MQ30S ESMM201VSN681MR25S ESMM201VSN681MA20S ESMM201VSN821MP45S ESMM201VSN821MQ35S ESMM201VSN821MR30S ESMM201VSN821MA25S ESMM201VSN102MP50S ESMM201VSN102MQ40S ESMM201VSN102MR35S ESMM201VSN102MA30S ESMM201VSN122MQ45S ESMM201VSN122MR35S ESMM201VSN122MA30S ESMM201VSN152MR45S ESMM201VSN152MA35S ESMM201VSN182MR50S ESMM201VSN182MA40S ESMM201VSN222MA45S ESMM221VSN181MP20S ESMM221VSN271MP25S ESMM221VSN271MQ20S ESMM221VSN331MP30S ESMM221VSN331MQ25S ESMM221VSN331MR20S ESMM221VSN391MP30S ESMM221VSN391MQ25S ESMM221VSN391MR20S ESMM221VSN471MP35S ESMM221VSN471MQ30S ESMM221VSN471MR25S ESMM221VSN471MA20S ESMM221VSN561MP40S ESMM221VSN561MQ35S ESMM221VSN561MR25S ESMM221VSN561MA20S ESMM221VSN681MP45S ESMM221VSN681MQ35S ESMM221VSN681MR30S ESMM221VSN681MA25S ESMM221VSN821MQ45S ESMM221VSN821MR35S ESMM221VSN821MA30S ESMM221VSN102MQ50S ESMM221VSN102MR35S ESMM221VSN102MA30S ESMM221VSN122MR40S ESMM221VSN122MA35S ESMM221VSN152MR50S ESMM221VSN152MA40S ESMM221VSN182MA45S ESMM251VSN151MP20S ESMM251VSN181MP20S ESMM251VSN221MP25S ESMM251VSN221MQ20S ESMM251VSN271MP25S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 85℃ SMMSeries ◆STANDARD RATINGS WV (Vdc) 250 315 350 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 330 330 330 390 390 390 390 470 470 470 470 560 560 560 680 680 680 680 820 820 820 1,000 1,000 1,200 1,200 1,500 1,800 100 120 150 150 180 180 180 220 220 220 270 270 270 270 330 330 330 390 390 390 390 470 470 470 560 560 560 680 680 820 820 1,000 82 120 120 150 150 150 180 180 22 ×30 25.4 ×25 30 × 20 22 × 35 25.4× 30 30× 25 35 ×20 22 ×35 25.4 ×35 30 ×25 35 ×20 22 × 40 25.4 × 35 30× 25 22× 50 25.4 ×40 30 ×30 35 ×25 25.4 ×45 30 ×35 35 × 30 30 × 40 35 × 35 30 × 45 35 × 35 35 ×40 35 ×50 22 × 20 25.4× 20 22× 25 25.4× 20 22 ×30 25.4 ×25 30 ×20 22 ×30 25.4 ×25 30 × 20 22× 35 25.4× 30 30× 25 35 ×20 22 ×40 25.4 ×35 30 ×25 22 ×45 25.4 × 40 30× 30 35× 25 25.4× 45 30 ×35 35 ×30 25.4 ×50 30 ×35 35 × 30 30 × 45 35× 35 30× 50 35 ×40 35 ×45 22 ×20 22 ×25 25.4 ×20 22 ×30 25.4 ×25 30 × 20 22× 30 25.4× 25 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.66 1.61 1.58 1.88 1.88 1.86 1.71 2.15 2.15 2.05 1.88 2.48 2.35 2.35 2.61 2.67 2.71 2.58 3.01 2.98 2.96 3.56 3.48 3.99 3.84 4.33 4.54 0.79 0.90 1.06 1.00 1.29 1.38 1.16 1.41 1.47 1.28 1.68 1.70 1.55 1.43 1.91 1.94 1.98 2.07 2.11 2.15 1.95 2.31 2.38 2.46 2.46 2.63 2.69 2.82 3.05 3.28 3.45 3.59 0.72 1.04 0.90 1.20 1.22 1.06 1.34 1.37 Part No. ESMM251VSN331MP30S ESMM251VSN331MQ25S ESMM251VSN331MR20S ESMM251VSN391MP35S ESMM251VSN391MQ30S ESMM251VSN391MR25S ESMM251VSN391MA20S ESMM251VSN471MP35S ESMM251VSN471MQ35S ESMM251VSN471MR25S ESMM251VSN471MA20S ESMM251VSN561MP40S ESMM251VSN561MQ35S ESMM251VSN561MR25S ESMM251VSN681MP50S ESMM251VSN681MQ40S ESMM251VSN681MR30S ESMM251VSN681MA25S ESMM251VSN821MQ45S ESMM251VSN821MR35S ESMM251VSN821MA30S ESMM251VSN102MR40S ESMM251VSN102MA35S ESMM251VSN122MR45S ESMM251VSN122MA35S ESMM251VSN152MA40S ESMM251VSN182MA50S ESMM3B1VSN101MP20S ESMM3B1VSN121MQ20S ESMM3B1VSN151MP25S ESMM3B1VSN151MQ20S ESMM3B1VSN181MP30S ESMM3B1VSN181MQ25S ESMM3B1VSN181MR20S ESMM3B1VSN221MP30S ESMM3B1VSN221MQ25S ESMM3B1VSN221MR20S ESMM3B1VSN271MP35S ESMM3B1VSN271MQ30S ESMM3B1VSN271MR25S ESMM3B1VSN271MA20S ESMM3B1VSN331MP40S ESMM3B1VSN331MQ35S ESMM3B1VSN331MR25S ESMM3B1VSN391MP45S ESMM3B1VSN391MQ40S ESMM3B1VSN391MR30S ESMM3B1VSN391MA25S ESMM3B1VSN471MQ45S ESMM3B1VSN471MR35S ESMM3B1VSN471MA30S ESMM3B1VSN561MQ50S ESMM3B1VSN561MR35S ESMM3B1VSN561MA30S ESMM3B1VSN681MR45S ESMM3B1VSN681MA35S ESMM3B1VSN821MR50S ESMM3B1VSN821MA40S ESMM3B1VSN102MA45S ESMM351VSN820MP20S ESMM351VSN121MP25S ESMM351VSN121MQ20S ESMM351VSN151MP30S ESMM351VSN151MQ25S ESMM351VSN151MR20S ESMM351VSN181MP30S ESMM351VSN181MQ25S WV (Vdc) 350 400 420 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 180 220 220 220 220 270 270 270 270 330 330 330 330 390 390 390 470 470 470 560 560 680 680 820 1,000 68 82 82 100 100 120 120 120 150 150 150 180 180 180 180 220 220 220 220 270 270 270 270 330 330 330 390 390 390 470 470 560 560 680 47 56 68 82 82 100 100 100 30 × 20 22 × 35 25.4 × 30 30 × 25 35 × 20 22 × 40 25.4 × 35 30 × 25 35 × 20 22 × 45 25.4 × 35 30 × 30 35 × 25 25.4 × 40 30 × 35 35 × 30 25.4 × 50 30 × 35 35 × 30 30 × 40 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 22 × 20 22 × 25 25.4 × 20 22 × 25 25.4 × 20 22 × 30 25.4 × 25 30 × 20 22 × 35 25.4 × 30 30 × 25 22 × 40 25.4 × 30 30 × 25 35 × 20 22 × 45 25.4 × 35 30 × 30 35 × 25 22 × 50 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 35 × 30 25.4 × 50 30 × 40 35 × 35 30 × 45 35 × 35 30 × 50 35 × 40 35 × 50 22 × 20 22 × 20 25.4 × 20 22 × 25 25.4 × 20 22 × 30 25.4 × 25 30 × 20 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.16 1.47 1.53 1.54 1.29 1.70 1.73 1.80 1.49 1.87 1.97 2.03 1.80 2.14 2.23 2.30 2.55 2.53 2.55 2.73 2.75 3.15 3.15 3.47 3.60 0.65 0.84 0.74 0.99 0.82 1.09 1.13 0.95 1.24 1.27 1.20 1.41 1.44 1.52 1.16 1.58 1.64 1.66 1.47 1.65 1.79 1.82 1.63 2.00 2.05 2.05 2.12 2.26 2.28 2.51 2.54 2.85 2.85 3.10 0.54 0.59 0.68 0.85 0.74 0.97 0.98 0.87 Part No. ESMM351VSN181MR20S ESMM351VSN221MP35S ESMM351VSN221MQ30S ESMM351VSN221MR25S ESMM351VSN221MA20S ESMM351VSN271MP40S ESMM351VSN271MQ35S ESMM351VSN271MR25S ESMM351VSN271MA20S ESMM351VSN331MP45S ESMM351VSN331MQ35S ESMM351VSN331MR30S ESMM351VSN331MA25S ESMM351VSN391MQ40S ESMM351VSN391MR35S ESMM351VSN391MA30S ESMM351VSN471MQ50S ESMM351VSN471MR35S ESMM351VSN471MA30S ESMM351VSN561MR40S ESMM351VSN561MA35S ESMM351VSN681MR50S ESMM351VSN681MA40S ESMM351VSN821MA45S ESMM351VSN102MA50S ESMM401VSN680MP20S ESMM401VSN820MP25S ESMM401VSN820MQ20S ESMM401VSN101MP25S ESMM401VSN101MQ20S ESMM401VSN121MP30S ESMM401VSN121MQ25S ESMM401VSN121MR20S ESMM401VSN151MP35S ESMM401VSN151MQ30S ESMM401VSN151MR25S ESMM401VSN181MP40S ESMM401VSN181MQ30S ESMM401VSN181MR25S ESMM401VSN181MA20S ESMM401VSN221MP45S ESMM401VSN221MQ35S ESMM401VSN221MR30S ESMM401VSN221MA25S ESMM401VSN271MP50S ESMM401VSN271MQ40S ESMM401VSN271MR30S ESMM401VSN271MA25S ESMM401VSN331MQ45S ESMM401VSN331MR35S ESMM401VSN331MA30S ESMM401VSN391MQ50S ESMM401VSN391MR40S ESMM401VSN391MA35S ESMM401VSN471MR45S ESMM401VSN471MA35S ESMM401VSN561MR50S ESMM401VSN561MA40S ESMM401VSN681MA50S ESMM421VSN470MP20S ESMM421VSN560MP20S ESMM421VSN680MQ20S ESMM421VSN820MP25S ESMM421VSN820MQ20S ESMM421VSN101MP30S ESMM421VSN101MQ25S ESMM421VSN101MR20S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 85℃ SMMSeries ◆STANDARD RATINGS WV (Vdc) 420 450 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 120 120 120 150 150 150 150 180 180 180 180 220 220 220 220 270 270 270 330 330 330 390 390 470 470 560 680 47 56 68 68 82 22 ×30 25.4 × 25 30 × 20 22× 35 25.4× 30 30 ×25 35 ×20 22 ×40 25.4 ×35 30 ×25 35 × 20 22 × 45 25.4× 35 30× 30 35 ×25 25.4 ×40 30 ×35 35 ×30 25.4 ×50 30 × 35 35× 35 30× 40 35× 35 30 ×45 35 ×40 35 ×45 35 ×50 22 ×20 22 ×20 22 × 25 25.4× 20 22× 25 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.07 1.08 0.95 1.21 1.26 1.30 1.11 1.33 1.42 1.48 1.16 1.55 1.58 1.65 1.47 1.74 1.90 1.94 2.20 1.98 2.17 2.22 2.27 2.50 2.61 2.95 3.15 0.54 0.59 0.71 0.68 0.86 Part No. ESMM421VSN121MP30S ESMM421VSN121MQ25S ESMM421VSN121MR20S ESMM421VSN151MP35S ESMM421VSN151MQ30S ESMM421VSN151MR25S ESMM421VSN151MA20S ESMM421VSN181MP40S ESMM421VSN181MQ35S ESMM421VSN181MR25S ESMM421VSN181MA20S ESMM421VSN221MP45S ESMM421VSN221MQ35S ESMM421VSN221MR30S ESMM421VSN221MA25S ESMM421VSN271MQ40S ESMM421VSN271MR35S ESMM421VSN271MA30S ESMM421VSN331MQ50S ESMM421VSN331MR35S ESMM421VSN331MA35S ESMM421VSN391MR40S ESMM421VSN391MA35S ESMM421VSN471MR45S ESMM421VSN471MA40S ESMM421VSN561MA45S ESMM421VSN681MA50S ESMM451VSN470MP20S ESMM451VSN560MP20S ESMM451VSN680MP25S ESMM451VSN680MQ20S ESMM451VSN820MP25S WV (Vdc) Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 450 82 82 100 100 100 120 120 120 120 150 150 150 150 180 180 180 180 220 220 220 220 270 270 270 330 330 330 390 390 470 470 560 25.4 × 20 30 × 20 22 × 30 25.4 × 25 30 × 20 22 × 35 25.4 × 30 30 × 25 35 × 20 22 × 40 25.4 × 30 30 × 25 35 × 20 22 × 45 25.4 × 35 30 × 30 35 × 25 22 × 50 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 35 × 30 25.4 × 50 30 × 40 35 × 35 30 × 45 35 × 40 30 × 50 35 × 45 35 × 50 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.74 0.79 0.95 0.97 0.87 1.07 1.09 1.12 0.99 1.18 1.25 1.29 1.06 1.32 1.40 1.45 1.33 1.48 1.59 1.64 1.66 1.73 1.89 1.90 2.12 2.12 2.15 2.35 2.38 2.65 2.68 2.88 Part No. ESMM451VSN820MQ20S ESMM451VSN820MR20S ESMM451VSN101MP30S ESMM451VSN101MQ25S ESMM451VSN101MR20S ESMM451VSN121MP35S ESMM451VSN121MQ30S ESMM451VSN121MR25S ESMM451VSN121MA20S ESMM451VSN151MP40S ESMM451VSN151MQ30S ESMM451VSN151MR25S ESMM451VSN151MA20S ESMM451VSN181MP45S ESMM451VSN181MQ35S ESMM451VSN181MR30S ESMM451VSN181MA25S ESMM451VSN221MP50S ESMM451VSN221MQ40S ESMM451VSN221MR30S ESMM451VSN221MA25S ESMM451VSN271MQ45S ESMM451VSN271MR35S ESMM451VSN271MA30S ESMM451VSN331MQ50S ESMM451VSN331MR40S ESMM451VSN331MA35S ESMM451VSN391MR45S ESMM451VSN391MA40S ESMM451VSN471MR50S ESMM451VSN471MA45S ESMM451VSN561MA50S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KHJ High ripple snap-ins, 105℃ New! Series KHJ ・Higher ripple current from KMT series ・Endurance with ripple current : 3,000 hours at 105℃ ・Rated voltage range : 400 to 450Vdc, Capacitance range : 240 to 820µF ・For inverter control, switching power supplies ・Non solvent resistant type ・RoHS2 Compliant Higher ripple KMT ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 400 to 450Vdc (at 20℃, 120Hz) ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 5 minutes) Rated voltage (Vdc) 400V 420 & 450V tanδ(Max.) 0.15 0.20 (at 20℃, 120Hz) Rated voltage (Vdc) 400V 420 & 450V Z(-25℃)/Z(+20℃) 3 8 Z(-40℃)/Z(+20℃) 12 14 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 3,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] Negative mark φD+1max. 10 2-φ2 4.0±0.5 L±2.5 Vent Sleeve (PVC : Brown) Negative mark Vent PC board pin-out (View from Solder side) 2-1.2×6 φD+1max. Sleeve (PVC : Brown) ●Terminal Code : LI (φ35) PC board pin-out (View from Solder side) 4.2±0.5 ●Terminal Code : VS (φ30, φ35) : Standard 5±0.5 L±2.5 4.5±1 14.2±1 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 E KHJ 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 330µF:331, 500µF:501) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 400V:401,450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS High ripple snap-ins, 105℃ KHJSeries New! ◆STANDARD RATINGS WV (Vdc) 400 420 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 280 360 410 410 480 510 520 570 580 680 740 820 250 310 350 360 420 440 30 ×35 30 ×41 30 ×46 35 ×35 30 ×51 35 ×41 30 ×54 30 ×59 35 ×46 35 ×51 35 ×54 35 ×59 30 ×35 30 ×41 35 ×35 30 ×46 30 ×51 30 ×54 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 2.32 2.71 2.96 2.96 3.27 3.43 3.44 3.67 3.75 4.15 4.38 4.69 2.12 2.43 2.57 2.68 2.96 3.06 Part No. EKHJ401VSN281MR35M EKHJ401VSN361MR41M EKHJ401VSN411MR46M EKHJ401VSN411MA35M EKHJ401VSN481MR51M EKHJ401VSN511MA41M EKHJ401VSN521MR54M EKHJ401VSN571MR59M EKHJ401VSN581MA46M EKHJ401VSN681MA51M EKHJ401VSN741MA54M EKHJ401VSN821MA59M EKHJ421VSN251MR35M EKHJ421VSN311MR41M EKHJ421VSN351MA35M EKHJ421VSN361MR46M EKHJ421VSN421MR51M EKHJ421VSN441MR54M WV (Vdc) 420 450 Cap (µF) 440 490 500 590 630 710 240 290 330 330 380 410 410 460 460 550 590 660 Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 35 × 41 30 × 59 35 × 46 35 × 51 35 × 54 35 × 59 30 × 35 30 × 41 30 × 46 35 × 35 30 × 51 30 × 54 35 × 41 30 × 59 35 × 46 35 × 51 35 × 54 35 × 59 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 2.99 3.28 3.27 3.64 3.80 4.10 2.12 2.35 2.57 2.50 2.81 2.96 2.89 3.18 3.14 3.51 3.68 3.95 Part No. EKHJ421VSN441MA41M EKHJ421VSN491MR59M EKHJ421VSN501MA46M EKHJ421VSN591MA51M EKHJ421VSN631MA54M EKHJ421VSN711MA59M EKHJ451VSN241MR35M EKHJ451VSN291MR41M EKHJ451VSN331MR46M EKHJ451VSN331MA35M EKHJ451VSN381MR51M EKHJ451VSN411MR54M EKHJ451VSN411MA41M EKHJ451VSN461MR59M EKHJ451VSN461MA46M EKHJ451VSN551MA51M EKHJ451VSN591MA54M EKHJ451VSN661MA59M ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 400 to 450V 50 0.72 120 1.00 300 1.21 1k 1.38 10k 1.48 50k 1.46 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KMT Series High ripple snap-ins, 105℃ KMT ・Higher ripple current from KMS series ・Endurance with ripple current : 3,000 hours at 105℃ ・Rated voltage range : 420, 450Vdc, Capacitance range : 82 to 680µF ・For inverter control, switching power supplies ・Non solvent resistant type ・RoHS2 Compliant Higher ripple KMS ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105℃ 420, 450Vdc ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 420 & 450V tanδ(Max.) 0.20 Rated voltage (Vdc) 420 & 450V Z(-25℃)/Z(+20℃) 8 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 3,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] Negative mark φD+1max. 10 2-φ2 4.0±0.5 L±2.5 Vent Sleeve (PET : Brown) Negative mark Vent PC board pin-out (View from Solder side) 2-1.2×6 φD+1max. Sleeve (PET : Brown) ●Terminal Code : LI (φ35) PC board pin-out (View from Solder side) 4.2±0.5 ●Terminal Code : VS (φ22 to φ35) : Standard 5±0.5 L±2.5 4.5±1 14.2±1 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 E KMT 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100µF:101, 330µF:331) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 420V:421,450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS High ripple snap-ins, 105℃ KMTSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 420 100 120 120 150 180 180 180 220 220 220 220 220 270 270 270 330 330 330 390 390 470 470 560 680 22 ×25 22 × 30 25.4 × 25 22 × 35 22 × 40 25.4 × 30 30 × 25 22 × 45 22 × 50 25.4 × 35 30 × 30 35 × 25 25.4 × 40 25.4 × 45 30 × 35 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.89 1.06 1.09 1.21 1.34 1.28 1.42 1.47 1.60 1.47 1.64 1.64 1.63 1.79 1.87 1.93 2.10 2.05 2.32 2.32 2.51 2.62 2.88 3.10 Part No. EKMT421VSN101MP25S EKMT421VSN121MP30S EKMT421VSN121MQ25S EKMT421VSN151MP35S EKMT421VSN181MP40S EKMT421VSN181MQ30S EKMT421VSN181MR25S EKMT421VSN221MP45S EKMT421VSN221MP50S EKMT421VSN221MQ35S EKMT421VSN221MR30S EKMT421VSN221MA25S EKMT421VSN271MQ40S EKMT421VSN271MQ45S EKMT421VSN271MR35S EKMT421VSN331MQ50S EKMT421VSN331MR40S EKMT421VSN331MA30S EKMT421VSN391MR45S EKMT421VSN391MA35S EKMT421VSN471MR50S EKMT421VSN471MA40S EKMT421VSN561MA45S EKMT421VSN681MA50S WV (Vdc) Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 450 82 100 100 120 150 150 150 180 180 180 180 180 220 220 270 270 270 330 330 390 390 470 560 22 × 25 22 × 30 25.4 × 25 22 × 35 22 × 40 25.4 × 35 30 × 25 22 × 45 22 × 50 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.81 0.97 1.04 1.08 1.22 1.31 1.31 1.35 1.42 1.35 1.49 1.60 1.55 1.71 1.74 1.90 1.90 2.20 2.20 2.40 2.42 2.67 2.85 Part No. EKMT451VSN820MP25S EKMT451VSN101MP30S EKMT451VSN101MQ25S EKMT451VSN121MP35S EKMT451VSN151MP40S EKMT451VSN151MQ35S EKMT451VSN151MR25S EKMT451VSN181MP45S EKMT451VSN181MP50S EKMT451VSN181MQ40S EKMT451VSN181MR30S EKMT451VSN181MA25S EKMT451VSN221MQ45S EKMT451VSN221MR35S EKMT451VSN271MQ50S EKMT451VSN271MR40S EKMT451VSN271MA30S EKMT451VSN331MR45S EKMT451VSN331MA35S EKMT451VSN391MR50S EKMT451VSN391MA40S EKMT451VSN471MA45S EKMT451VSN561MA50S ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 420, 450Vdc 50 0.68 120 1.00 300 1.16 1k 1.30 10k 1.41 50k 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KHS Series Downsized snap-ins, 105℃ KHS ・For solar power generation ・Endurance with ripple current : 3,000 hours at 105℃ ・Rated voltage range:450 to 500V, Capacitance range:68 to 1,000μF ・Non solvent resistant type ・RoHS2 Compliant Downsizing KMS Downsizing KMM ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105℃ 450 to 500Vdc ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 450 to 500V tanδ (Max.) 0.20 Rated voltage (Vdc) 450 to 500V Z(-25℃)/Z(+20℃) 8 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 3,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value (475, 500Vdc: ≦ 250%) Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] ●Terminal Code : LI (φ35) Negative mark φD+1max. 10 2-φ2 4.0±0.5 L±2.5 Vent Sleeve (PET : Brown) Negative mark Vent PC board pin-out (View from Solder side) 2-1.2×6 φD+1max. Sleeve (PET : Brown) PC board pin-out (View from Solder side) 4.2±0.5 ●Terminal Code : VS (φ22 to φ35) : Standard 5±0.5 L±2.5 4.5±1 14.2±1 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KHS AAA VS N AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100µF:101, 1,000µF:102) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 450V:451, 475V:4H1) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 105℃ KHSSeries ◆STANDARD RATINGS WV (Vdc) 450 475 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 100 150 180 180 180 220 220 270 270 270 270 330 330 330 390 390 390 470 470 470 560 560 560 680 680 680 820 820 1,000 82 100 100 120 120 150 150 150 180 180 180 180 180 22 ×25 22 ×30 22 × 35 22 × 40 25.4× 25 22× 45 25.4 ×30 22 ×50 25.4 ×35 30 ×25 35 ×25 22 × 60 25.4 × 40 30× 30 25.4× 45 30 ×35 35 ×30 25.4 ×50 30 ×40 35 ×35 25.4 × 60 30× 45 35× 40 30× 50 35 ×45 35 ×50 30 ×60 35 ×55 35 ×60 22 ×25 22 ×30 25.4 × 25 22× 35 25.4× 30 22× 40 22 ×45 30 ×25 22 ×50 25.4 ×35 25.4 ×40 30 × 30 35× 25 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.71 0.91 1.02 1.04 1.02 1.17 1.16 1.33 1.34 1.28 1.24 1.54 1.51 1.43 1.67 1.59 1.52 1.86 1.79 1.69 2.09 2.01 1.95 2.25 2.16 2.22 2.56 2.47 2.78 0.67 0.78 0.79 0.87 0.89 0.99 1.01 1.01 1.13 1.14 1.16 1.11 1.08 Part No. EKHS451VSN101MP25S EKHS451VSN151MP30S EKHS451VSN181MP35S EKHS451VSN181MP40S EKHS451VSN181MQ25S EKHS451VSN221MP45S EKHS451VSN221MQ30S EKHS451VSN271MP50S EKHS451VSN271MQ35S EKHS451VSN271MR25S EKHS451VSN271MA25S EKHS451VSN331MP60S EKHS451VSN331MQ40S EKHS451VSN331MR30S EKHS451VSN391MQ45S EKHS451VSN391MR35S EKHS451VSN391MA30S EKHS451VSN471MQ50S EKHS451VSN471MR40S EKHS451VSN471MA35S EKHS451VSN561MQ60S EKHS451VSN561MR45S EKHS451VSN561MA40S EKHS451VSN681MR50S EKHS451VSN681MA45S EKHS451VSN681MA50S EKHS451VSN821MR60S EKHS451VSN821MA55S EKHS451VSN102MA60S EKHS4H1VSN820MP25S EKHS4H1VSN101MP30S EKHS4H1VSN101MQ25S EKHS4H1VSN121MP35S EKHS4H1VSN121MQ30S EKHS4H1VSN151MP40S EKHS4H1VSN151MP45S EKHS4H1VSN151MR25S EKHS4H1VSN181MP50S EKHS4H1VSN181MQ35S EKHS4H1VSN181MQ40S EKHS4H1VSN181MR30S EKHS4H1VSN181MA25S WV (Vdc) 475 500 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 220 220 220 270 270 270 330 330 330 390 390 470 470 560 680 68 82 82 100 120 120 120 150 150 180 180 180 180 180 220 220 220 220 270 270 270 270 330 330 390 390 470 560 22 × 60 25.4 × 45 30 × 35 25.4 × 50 30 × 40 35 × 30 25.4 × 60 30 × 45 35 × 35 30 × 50 35 × 40 30 × 60 35 × 45 35 × 50 35 × 60 22 × 25 22 × 30 25.4× 25 22 × 35 22 × 40 25.4 × 30 30 × 25 22 × 45 25.4 × 35 22 × 50 25.4 × 40 25.4 × 45 30 × 30 35 × 25 22 × 60 25.4 × 50 30 × 35 35 × 30 25.4 × 60 30 × 40 30 × 45 35 × 35 30 × 50 35 × 40 30 × 60 35 × 45 35 × 50 35 × 60 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.31 1.31 1.26 1.47 1.44 1.35 1.67 1.63 1.51 1.80 1.70 2.05 1.91 2.13 2.44 0.61 0.70 0.72 0.79 0.89 0.89 0.90 1.01 1.04 1.13 1.16 1.18 1.11 1.08 1.31 1.33 1.26 1.22 1.51 1.44 1.47 1.37 1.66 1.57 1.87 1.74 1.95 2.22 Part No. EKHS4H1VSN221MP60S EKHS4H1VSN221MQ45S EKHS4H1VSN221MR35S EKHS4H1VSN271MQ50S EKHS4H1VSN271MR40S EKHS4H1VSN271MA30S EKHS4H1VSN331MQ60S EKHS4H1VSN331MR45S EKHS4H1VSN331MA35S EKHS4H1VSN391MR50S EKHS4H1VSN391MA40S EKHS4H1VSN471MR60S EKHS4H1VSN471MA45S EKHS4H1VSN561MA50S EKHS4H1VSN681MA60S EKHS501VSN680MP25S EKHS501VSN820MP30S EKHS501VSN820MQ25S EKHS501VSN101MP35S EKHS501VSN121MP40S EKHS501VSN121MQ30S EKHS501VSN121MR25S EKHS501VSN151MP45S EKHS501VSN151MQ35S EKHS501VSN181MP50S EKHS501VSN181MQ40S EKHS501VSN181MQ45S EKHS501VSN181MR30S EKHS501VSN181MA25S EKHS501VSN221MP60S EKHS501VSN221MQ50S EKHS501VSN221MR35S EKHS501VSN221MA30S EKHS501VSN271MQ60S EKHS501VSN271MR40S EKHS501VSN271MR45S EKHS501VSN271MA35S EKHS501VSN331MR50S EKHS501VSN331MA40S EKHS501VSN391MR60S EKHS501VSN391MA45S EKHS501VSN471MA50S EKHS501VSN561MA60S ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 450Vdc 475, 500Vdc 50 0.77 0.70 120 1.00 1.00 300 1.16 1.16 1k 1.30 1.30 10k 1.41 1.41 50k 1.43 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KMS Downsized snap-ins, 105℃ Upgrade! Series KHS ・The lower temperature range of the category temperature range has been expanded. ・For solar power generation ・Endurance with ripple current : 105℃ 3,000 hours ・Rated voltage range : 160 to 600V ・Capacitance range : 47 to 3,300µF ・Non solvent resistant type ・RoHS2 Compliant Downsizing KMS LXS Longer life Downsizing KMM ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃(160 to 500Vdc) -25 to +105℃(550 to 600Vdc) 160 to 600Vdc ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 160 to 400V 420 to 600V tanδ (Max.) 0.15 0.20 Rated voltage (Vdc) 160 to 400V 420 to 600V Z(-25℃)/Z(+20℃) 4 8 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 3,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value （600Vdc：≦300％） Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] ●Terminal Code : LI (φ35) Negative mark φD+1max. 10 2-φ2 4.0±0.5 L±2.5 Vent Sleeve (PET : Brown) Negative mark Vent PC board pin-out (View from Solder side) 2-1.2×6 φD+1max. Sleeve (PET : Brown) PC board pin-out (View from Solder side) 4.2±0.5 ●Terminal Code : VS (φ22 to φ35) : Standard 5±0.5 L±2.5 4.5±1 14.2±1 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E KMS A A A V S N A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100µF:101, 1,000µF:102) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 160V:161, 400V:401) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 105℃ KMSSeries ◆STANDARD RATINGS WV (Vdc) 160 180 200 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 470 680 680 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,200 1,500 1,500 1,800 1,800 1,800 2,200 2,200 2,700 2,700 2,700 3,300 390 560 560 680 820 820 820 1,000 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,700 2,700 390 470 560 560 680 680 820 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,200 1,500 1,500 22 ×25 22 × 30 25.4 × 25 22 × 35 25.4 × 30 22 ×40 22 ×45 25.4 ×35 30 ×25 22 ×50 25.4 ×40 30 ×30 35 ×25 25.4 ×45 30 ×35 25.4 ×50 30 ×40 35 ×30 30 ×45 35 ×35 30 ×50 35 ×40 35 ×45 35 × 50 22× 25 22× 30 25.4× 25 22× 35 22× 40 25.4× 30 30× 25 22 × 45 22 × 50 25.4 × 35 25.4 × 40 30 × 30 25.4 × 45 30 × 35 35 × 25 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 22 ×25 22 ×30 22 ×35 25.4 ×25 22 ×40 25.4 ×30 22 ×45 25.4 × 35 30 × 25 22 × 50 25.4 × 40 30 × 30 35 × 25 25.4 × 45 25.4 × 50 30 × 35 35 × 30 30 × 40 35 × 35 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.47 1.86 1.84 2.09 2.08 2.35 2.40 2.40 2.50 2.69 2.68 2.77 2.91 3.05 3.17 3.40 3.57 3.62 4.05 4.07 4.56 4.67 4.78 5.40 1.34 1.68 1.67 1.90 2.13 2.08 2.26 2.40 2.45 2.40 2.45 2.52 2.73 2.83 2.91 3.10 3.26 3.31 3.66 3.68 4.11 4.22 4.78 4.88 1.34 1.54 1.72 1.67 1.94 1.89 2.17 2.17 2.26 2.45 2.45 2.52 2.66 2.73 2.78 2.83 2.96 3.26 3.36 Part No. EKMS161VSN471MP25S EKMS161VSN681MP30S EKMS161VSN681MQ25S EKMS161VSN821MP35S EKMS161VSN821MQ30S EKMS161VSN102MP40S EKMS161VSN102MP45S EKMS161VSN102MQ35S EKMS161VSN102MR25S EKMS161VSN122MP50S EKMS161VSN122MQ40S EKMS161VSN122MR30S EKMS161VSN122MA25S EKMS161VSN152MQ45S EKMS161VSN152MR35S EKMS161VSN182MQ50S EKMS161VSN182MR40S EKMS161VSN182MA30S EKMS161VSN222MR45S EKMS161VSN222MA35S EKMS161VSN272MR50S EKMS161VSN272MA40S EKMS161VSN272MA45S EKMS161VSN332MA50S EKMS181VSN391MP25S EKMS181VSN561MP30S EKMS181VSN561MQ25S EKMS181VSN681MP35S EKMS181VSN821MP40S EKMS181VSN821MQ30S EKMS181VSN821MR25S EKMS181VSN102MP45S EKMS181VSN102MP50S EKMS181VSN102MQ35S EKMS181VSN102MQ40S EKMS181VSN102MR30S EKMS181VSN122MQ45S EKMS181VSN122MR35S EKMS181VSN122MA25S EKMS181VSN152MQ50S EKMS181VSN152MR40S EKMS181VSN152MA30S EKMS181VSN182MR45S EKMS181VSN182MA35S EKMS181VSN222MR50S EKMS181VSN222MA40S EKMS181VSN272MA45S EKMS181VSN272MA50S EKMS201VSN391MP25S EKMS201VSN471MP30S EKMS201VSN561MP35S EKMS201VSN561MQ25S EKMS201VSN681MP40S EKMS201VSN681MQ30S EKMS201VSN821MP45S EKMS201VSN821MQ35S EKMS201VSN821MR25S EKMS201VSN102MP50S EKMS201VSN102MQ40S EKMS201VSN102MR30S EKMS201VSN102MA25S EKMS201VSN122MQ45S EKMS201VSN122MQ50S EKMS201VSN122MR35S EKMS201VSN122MA30S EKMS201VSN152MR40S EKMS201VSN152MA35S WV (Vdc) 200 250 315 400 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 1,800 1,800 1,800 2,200 2,700 270 330 390 390 470 470 560 560 560 680 680 680 680 820 820 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,800 180 220 220 270 330 330 330 390 390 390 470 470 470 560 560 560 560 680 680 820 820 820 1,000 1,200 120 150 180 180 220 220 270 270 270 330 330 330 330 390 30 × 45 30 × 50 35 × 40 35 × 45 35 × 50 22 × 25 22 × 30 22 × 35 25.4 × 25 22 × 40 25.4 × 30 22 × 45 25.4 × 35 30 × 25 22 × 50 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 25.4 × 50 30 × 40 35 × 30 30 × 45 30 × 50 35 × 35 35 × 40 35 × 45 35 × 50 22 × 25 22 × 30 25.4 × 25 22 × 35 22 × 40 25.4 × 30 30 × 25 22 × 45 22 × 50 25.4 × 35 25.4 × 40 30 × 30 35 × 25 25.4 × 45 25.4 × 50 30 × 35 35 × 30 30 × 40 35 × 35 30 × 45 30 × 50 35 × 40 35 × 45 35 × 50 22 × 25 22 × 30 22 × 35 25.4 × 25 22 × 40 25.4 × 30 22 × 45 25.4 × 35 30 × 25 22 × 50 25.4 × 40 30 × 30 35 × 25 25.4 × 45 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 3.66 3.72 3.81 4.32 4.88 1.11 1.29 1.44 1.40 1.61 1.57 1.79 1.79 1.87 2.02 2.02 2.08 2.19 2.26 2.34 2.53 2.66 2.70 2.99 3.04 3.00 3.48 3.56 3.98 0.95 1.10 1.10 1.24 1.40 1.38 1.43 1.56 1.59 1.57 1.76 1.73 1.82 1.96 1.99 1.93 2.02 2.19 2.26 2.47 2.51 2.57 2.91 3.25 0.77 0.90 1.02 0.99 1.15 1.13 1.29 1.30 1.29 1.47 1.47 1.45 1.52 1.63 Part No. EKMS201VSN182MR45S EKMS201VSN182MR50S EKMS201VSN182MA40S EKMS201VSN222MA45S EKMS201VSN272MA50S EKMS251VSN271MP25S EKMS251VSN331MP30S EKMS251VSN391MP35S EKMS251VSN391MQ25S EKMS251VSN471MP40S EKMS251VSN471MQ30S EKMS251VSN561MP45S EKMS251VSN561MQ35S EKMS251VSN561MR25S EKMS251VSN681MP50S EKMS251VSN681MQ40S EKMS251VSN681MR30S EKMS251VSN681MA25S EKMS251VSN821MQ45S EKMS251VSN821MR35S EKMS251VSN102MQ50S EKMS251VSN102MR40S EKMS251VSN102MA30S EKMS251VSN122MR45S EKMS251VSN122MR50S EKMS251VSN122MA35S EKMS251VSN152MA40S EKMS251VSN152MA45S EKMS251VSN182MA50S EKMS3B1VSN181MP25S EKMS3B1VSN221MP30S EKMS3B1VSN221MQ25S EKMS3B1VSN271MP35S EKMS3B1VSN331MP40S EKMS3B1VSN331MQ30S EKMS3B1VSN331MR25S EKMS3B1VSN391MP45S EKMS3B1VSN391MP50S EKMS3B1VSN391MQ35S EKMS3B1VSN471MQ40S EKMS3B1VSN471MR30S EKMS3B1VSN471MA25S EKMS3B1VSN561MQ45S EKMS3B1VSN561MQ50S EKMS3B1VSN561MR35S EKMS3B1VSN561MA30S EKMS3B1VSN681MR40S EKMS3B1VSN681MA35S EKMS3B1VSN821MR45S EKMS3B1VSN821MR50S EKMS3B1VSN821MA40S EKMS3B1VSN102MA45S EKMS3B1VSN122MA50S EKMS401VSN121MP25S EKMS401VSN151MP30S EKMS401VSN181MP35S EKMS401VSN181MQ25S EKMS401VSN221MP40S EKMS401VSN221MQ30S EKMS401VSN271MP45S EKMS401VSN271MQ35S EKMS401VSN271MR25S EKMS401VSN331MP50S EKMS401VSN331MQ40S EKMS401VSN331MR30S EKMS401VSN331MA25S EKMS401VSN391MQ45S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 105℃ KMSSeries ◆STANDARD RATINGS WV (Vdc) 400 420 450 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 390 390 470 470 560 560 560 680 680 820 100 120 120 150 180 180 180 220 220 220 220 270 270 270 330 330 330 330 390 390 470 470 560 680 82 120 120 120 150 150 180 180 180 220 220 220 220 270 270 270 270 330 390 390 390 470 470 560 25.4 ×50 30 × 35 30 × 40 35× 30 30× 45 30 ×50 35 ×35 35 ×40 35 ×45 35 ×50 22 × 25 22 × 30 25.4× 25 22× 35 22 ×40 25.4 ×30 30 ×25 22 ×45 22 ×50 25.4 × 35 30× 30 25.4× 40 25.4× 45 35 ×25 25.4 ×50 30 ×35 30 ×40 35 ×30 30 × 45 35× 35 30× 50 35× 40 35 ×45 35 ×50 22 ×25 22 ×30 22 ×35 25.4 ×25 22 × 40 25.4× 30 22× 45 25.4× 35 30 ×25 22 ×50 25.4 ×40 30 ×30 35 ×25 25.4 × 45 25.4 × 50 30× 35 35× 30 30 ×40 30 ×45 30 ×50 35 ×35 35 ×40 35 × 45 35× 50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.66 1.61 1.82 1.85 2.04 2.07 2.05 2.34 2.40 2.69 0.70 0.81 0.81 0.93 1.04 1.02 1.06 1.17 1.20 1.18 1.18 1.33 1.36 1.38 1.52 1.48 1.52 1.55 1.70 1.71 1.90 1.95 2.17 2.45 0.64 0.81 0.83 0.81 0.94 0.93 1.06 1.06 1.06 1.20 1.20 1.18 1.24 1.36 1.38 1.34 1.40 1.52 1.70 1.73 1.71 1.95 1.99 2.22 Part No. EKMS401VSN391MQ50S EKMS401VSN391MR35S EKMS401VSN471MR40S EKMS401VSN471MA30S EKMS401VSN561MR45S EKMS401VSN561MR50S EKMS401VSN561MA35S EKMS401VSN681MA40S EKMS401VSN681MA45S EKMS401VSN821MA50S EKMS421VSN101MP25S EKMS421VSN121MP30S EKMS421VSN121MQ25S EKMS421VSN151MP35S EKMS421VSN181MP40S EKMS421VSN181MQ30S EKMS421VSN181MR25S EKMS421VSN221MP45S EKMS421VSN221MP50S EKMS421VSN221MQ35S EKMS421VSN221MR30S EKMS421VSN271MQ40S EKMS421VSN271MQ45S EKMS421VSN271MA25S EKMS421VSN331MQ50S EKMS421VSN331MR35S EKMS421VSN331MR40S EKMS421VSN331MA30S EKMS421VSN391MR45S EKMS421VSN391MA35S EKMS421VSN471MR50S EKMS421VSN471MA40S EKMS421VSN561MA45S EKMS421VSN681MA50S EKMS451VSN820MP25S EKMS451VSN121MP30S EKMS451VSN121MP35S EKMS451VSN121MQ25S EKMS451VSN151MP40S EKMS451VSN151MQ30S EKMS451VSN181MP45S EKMS451VSN181MQ35S EKMS451VSN181MR25S EKMS451VSN221MP50S EKMS451VSN221MQ40S EKMS451VSN221MR30S EKMS451VSN221MA25S EKMS451VSN271MQ45S EKMS451VSN271MQ50S EKMS451VSN271MR35S EKMS451VSN271MA30S EKMS451VSN331MR40S EKMS451VSN391MR45S EKMS451VSN391MR50S EKMS451VSN391MA35S EKMS451VSN471MA40S EKMS451VSN471MA45S EKMS451VSN561MA50S WV (Vdc) 500 550 600 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 47 56 68 82 82 100 100 120 120 120 150 150 150 180 180 180 220 220 270 270 330 390 470 82 82 100 100 100 120 120 120 120 150 150 180 180 180 220 220 270 270 330 330 470 100 100 120 150 150 180 180 180 220 220 220 270 330 22 × 25 22 × 30 25.4 × 25 22 × 35 25.4 × 30 22 × 45 30 × 25 22 × 50 25.4 × 35 30 × 30 25.4 × 45 30 × 35 35 × 25 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 35 × 60 22 × 35 25.4 × 30 22 × 45 25.4 × 35 30 × 25 22 × 50 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 35 × 60 30 × 30 35 × 25 30 × 35 30 × 40 35 × 30 30 × 45 30 × 50 35 × 35 30 × 60 35 × 40 35 × 45 35 × 50 35 × 60 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.51 0.58 0.65 0.72 0.74 0.83 0.82 0.93 0.93 0.91 1.08 1.04 0.99 1.20 1.17 1.10 1.33 1.23 1.50 1.42 1.60 1.78 2.03 0.72 0.74 0.83 0.85 0.82 0.93 0.95 0.91 0.88 1.08 1.04 1.20 1.17 1.10 1.33 1.23 1.50 1.42 1.60 1.64 2.03 0.83 0.85 0.93 1.07 1.06 1.20 1.22 1.18 1.40 1.35 1.38 1.56 1.79 Part No. EKMS501VSN470MP25S EKMS501VSN560MP30S EKMS501VSN680MQ25S EKMS501VSN820MP35S EKMS501VSN820MQ30S EKMS501VSN101MP45S EKMS501VSN101MR25S EKMS501VSN121MP50S EKMS501VSN121MQ35S EKMS501VSN121MR30S EKMS501VSN151MQ45S EKMS501VSN151MR35S EKMS501VSN151MA25S EKMS501VSN181MQ50S EKMS501VSN181MR40S EKMS501VSN181MA30S EKMS501VSN221MR45S EKMS501VSN221MA35S EKMS501VSN271MR50S EKMS501VSN271MA40S EKMS501VSN331MA45S EKMS501VSN391MA50S EKMS501VSN471MA60S EKMS551VSN820MP35S EKMS551VSN820MQ30S EKMS551VSN101MP45S EKMS551VSN101MQ35S EKMS551VSN101MR25S EKMS551VSN121MP50S EKMS551VSN121MQ40S EKMS551VSN121MR30S EKMS551VSN121MA25S EKMS551VSN151MQ45S EKMS551VSN151MR35S EKMS551VSN181MQ50S EKMS551VSN181MR40S EKMS551VSN181MA30S EKMS551VSN221MR45S EKMS551VSN221MA35S EKMS551VSN271MR50S EKMS551VSN271MA40S EKMS551VSN331MA45S EKMS551VSN331MA50S EKMS551VSN471MA60S EKMS601VSN101MR30S EKMS601VSN101MA25S EKMS601VSN121MR35S EKMS601VSN151MR40S EKMS601VSN151MA30S EKMS601VSN181MR45S EKMS601VSN181MR50S EKMS601VSN181MA35S EKMS601VSN221MR60S EKMS601VSN221MA40S EKMS601VSN221MA45S EKMS601VSN271MA50S EKMS601VSN331MA60S ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 160 to 250Vdc 315 to 450Vdc 500 to 600Vdc 50 0.81 0.77 0.70 120 1.00 1.00 1.00 300 1.17 1.16 1.16 1k 1.32 1.30 1.30 10k 1.45 1.41 1.41 50k 1.50 1.43 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KMM LXS Series LXQ Longer life Longer life ・Longer life from KMQ series ・Endurance with ripple current : 2,000 to 3,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant Long life snap-ins, 105℃ KMM KMS Downsized Longer life KMQ ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105℃ 160 to 450Vdc ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 160 to 400V 420 & 450V tanδ(Max.) 0.15 0.20 Rated voltage (Vdc) 160 to 400V 420 & 450V Z(-25℃)/Z(+20℃) 4 8 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage)for 3,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] ●Terminal Code : LI (φ35) Negative mark φD+1max. 10 Vent 2-φ2 * 4.0±0.5 L±2 Sleeve (PET : Brown) Negative mark PC board pin-out (View from Solder side) 2-1.2×6 φD+1max. Sleeve (PET : Brown) PC board pin-out (View from Solder side) 4.2±0.5 ●Terminal Code : VS (φ22 toφ35) : Standard Vent 5±0.5 L±2 4.5±1 14.2±1 *φD=35mm : 3.5±0.5mm The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 E K MM 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 120µF:121, 1,000µF:102) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 160V:161, 250V:251, 315V:3B1) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105℃ KMMSeries ◆STANDARD RATINGS WV (Vdc) 160 180 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 220 270 330 330 390 390 390 470 470 470 560 560 560 560 680 680 680 680 820 820 820 820 1,000 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,800 1,800 2,200 2,200 2,700 3,300 180 220 270 270 330 330 330 390 390 390 470 470 470 470 560 560 560 560 680 680 680 680 820 820 820 820 1,000 1,000 1,000 22 ×20 25.4 ×20 22 ×25 25.4 ×20 22 ×25 25.4 ×25 30 ×20 22 ×30 25.4 ×25 30 ×20 22 ×35 25.4 ×30 30 ×25 35 ×20 22 ×40 25.4 ×30 30 ×25 35 ×20 22 ×45 25.4 ×35 30 ×30 35 ×25 22 ×50 25.4 ×40 30 ×30 35 ×25 25.4 ×45 30 ×35 35 ×30 25.4 ×60 30 ×40 35 ×30 30 ×45 35 ×35 30 ×60 35 ×45 35 ×50 35 ×60 22 ×20 25.4 ×20 22 ×25 25.4 ×20 22 ×25 25.4 ×25 30 ×20 22 ×30 25.4 ×25 30 ×20 22 ×35 25.4 ×30 30 ×25 35 ×20 22 ×40 25.4 ×30 30 ×25 35 ×20 22 ×45 25.4 ×35 30 ×30 35 ×25 22 ×50 25.4 ×40 30 ×30 35 ×25 25.4 ×45 30 ×35 35 ×30 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.81 0.98 1.20 1.02 1.30 1.26 1.25 1.55 1.55 1.30 1.67 1.67 1.67 1.46 1.82 1.82 1.82 1.51 2.04 2.04 2.04 2.04 2.25 2.25 2.25 2.25 2.49 2.49 2.49 2.97 2.84 2.84 3.32 3.00 3.86 3.50 4.00 4.63 0.80 0.90 1.00 0.95 1.20 1.16 1.15 1.35 1.35 1.20 1.50 1.50 1.50 1.36 1.67 1.67 1.67 1.43 1.78 1.78 1.78 1.83 2.04 2.04 2.04 2.04 2.30 2.30 2.30 Part No. EKMM161VSN221MP20S EKMM161VSN271MQ20S EKMM161VSN331MP25S EKMM161VSN331MQ20S EKMM161VSN391MP25S EKMM161VSN391MQ25S EKMM161VSN391MR20S EKMM161VSN471MP30S EKMM161VSN471MQ25S EKMM161VSN471MR20S EKMM161VSN561MP35S EKMM161VSN561MQ30S EKMM161VSN561MR25S EKMM161VSN561MA20S EKMM161VSN681MP40S EKMM161VSN681MQ30S EKMM161VSN681MR25S EKMM161VSN681MA20S EKMM161VSN821MP45S EKMM161VSN821MQ35S EKMM161VSN821MR30S EKMM161VSN821MA25S EKMM161VSN102MP50S EKMM161VSN102MQ40S EKMM161VSN102MR30S EKMM161VSN102MA25S EKMM161VSN122MQ45S EKMM161VSN122MR35S EKMM161VSN122MA30S EKMM161VSN152MQ60S EKMM161VSN152MR40S EKMM161VSN152MA30S EKMM161VSN182MR45S EKMM161VSN182MA35S EKMM161VSN222MR60S EKMM161VSN222MA45S EKMM161VSN272MA50S EKMM161VSN332MA60S EKMM181VSN181MP20S EKMM181VSN221MQ20S EKMM181VSN271MP25S EKMM181VSN271MQ20S EKMM181VSN331MP25S EKMM181VSN331MQ25S EKMM181VSN331MR20S EKMM181VSN391MP30S EKMM181VSN391MQ25S EKMM181VSN391MR20S EKMM181VSN471MP35S EKMM181VSN471MQ30S EKMM181VSN471MR25S EKMM181VSN471MA20S EKMM181VSN561MP40S EKMM181VSN561MQ30S EKMM181VSN561MR25S EKMM181VSN561MA20S EKMM181VSN681MP45S EKMM181VSN681MQ35S EKMM181VSN681MR30S EKMM181VSN681MA25S EKMM181VSN821MP50S EKMM181VSN821MQ40S EKMM181VSN821MR30S EKMM181VSN821MA25S EKMM181VSN102MQ45S EKMM181VSN102MR35S EKMM181VSN102MA30S WV (Vdc) 180 200 220 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 1,200 1,200 1,200 1,500 1,500 1,800 1,800 2,200 2,700 150 180 220 270 270 330 330 330 390 390 390 470 470 470 470 560 560 560 680 680 680 680 820 820 820 1,000 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,800 1,800 2,200 150 180 220 220 270 270 270 330 330 330 390 390 390 390 470 470 470 560 560 560 560 680 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 60 35 × 40 35 × 50 35 × 60 22 × 20 22 × 20 25.4 × 20 22 × 25 30 × 20 22 × 30 25.4 × 25 30 × 20 22 × 30 25.4 × 25 35 × 20 22 × 35 25.4 × 30 30 × 25 35 × 20 22 × 40 25.4 × 30 30 × 25 22 × 45 25.4 × 35 30 × 30 35 × 25 25.4 × 45 30 × 30 35 × 25 25.4 × 50 30 × 35 35 × 30 25.4 × 60 30 × 40 35 × 35 30 × 50 35 × 40 30 × 60 35 × 45 35 × 50 22 × 20 25.4 × 20 22 × 25 25.4 × 20 22 × 30 25.4 × 25 30 × 20 22 × 35 25.4 × 25 35 × 20 22 × 35 25.4 × 30 30 × 25 35 × 20 22 × 40 25.4 × 35 30 × 25 22 × 45 25.4 × 40 30 × 30 35 × 25 25.4 × 45 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 2.55 2.55 2.55 2.90 2.90 3.49 3.30 3.65 4.19 0.73 0.80 0.85 1.10 1.05 1.25 1.25 1.10 1.35 1.35 1.30 1.50 1.50 1.50 1.41 1.67 1.67 1.67 1.78 1.78 1.78 1.78 2.04 2.04 2.04 2.30 2.30 2.30 2.66 2.65 2.65 3.08 3.08 3.49 3.48 3.78 0.67 0.76 1.00 0.84 1.15 1.08 0.98 1.25 1.25 1.13 1.40 1.40 1.36 1.23 1.51 1.54 1.50 1.70 1.72 1.70 1.71 1.94 Part No. EKMM181VSN122MQ50S EKMM181VSN122MR40S EKMM181VSN122MA30S EKMM181VSN152MR45S EKMM181VSN152MA35S EKMM181VSN182MR60S EKMM181VSN182MA40S EKMM181VSN222MA50S EKMM181VSN272MA60S EKMM201VSN151MP20S EKMM201VSN181MP20S EKMM201VSN221MQ20S EKMM201VSN271MP25S EKMM201VSN271MR20S EKMM201VSN331MP30S EKMM201VSN331MQ25S EKMM201VSN331MR20S EKMM201VSN391MP30S EKMM201VSN391MQ25S EKMM201VSN391MA20S EKMM201VSN471MP35S EKMM201VSN471MQ30S EKMM201VSN471MR25S EKMM201VSN471MA20S EKMM201VSN561MP40S EKMM201VSN561MQ30S EKMM201VSN561MR25S EKMM201VSN681MP45S EKMM201VSN681MQ35S EKMM201VSN681MR30S EKMM201VSN681MA25S EKMM201VSN821MQ45S EKMM201VSN821MR30S EKMM201VSN821MA25S EKMM201VSN102MQ50S EKMM201VSN102MR35S EKMM201VSN102MA30S EKMM201VSN122MQ60S EKMM201VSN122MR40S EKMM201VSN122MA35S EKMM201VSN152MR50S EKMM201VSN152MA40S EKMM201VSN182MR60S EKMM201VSN182MA45S EKMM201VSN222MA50S EKMM221VSN151MP20S EKMM221VSN181MQ20S EKMM221VSN221MP25S EKMM221VSN221MQ20S EKMM221VSN271MP30S EKMM221VSN271MQ25S EKMM221VSN271MR20S EKMM221VSN331MP35S EKMM221VSN331MQ25S EKMM221VSN331MA20S EKMM221VSN391MP35S EKMM221VSN391MQ30S EKMM221VSN391MR25S EKMM221VSN391MA20S EKMM221VSN471MP40S EKMM221VSN471MQ35S EKMM221VSN471MR25S EKMM221VSN561MP45S EKMM221VSN561MQ40S EKMM221VSN561MR30S EKMM221VSN561MA25S EKMM221VSN681MQ45S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105℃ KMMSeries ◆STANDARD RATINGS WV (Vdc) 220 250 315 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 680 680 820 820 820 1,000 1,000 1,000 1,200 1,200 1,500 1,500 1,800 2,200 120 150 180 180 220 220 220 270 270 270 330 330 330 330 390 390 390 470 470 470 470 560 560 560 560 680 680 680 820 820 820 1,000 1,000 1,200 1,200 1,500 1,800 68 82 100 100 120 120 120 150 150 150 150 180 180 180 180 220 30 ×35 35 ×25 25.4 ×50 30 ×40 35 ×30 25.4 ×60 30 ×45 35 ×35 30 ×50 35 ×40 30 ×60 35 ×45 35 ×50 35 ×60 22 ×20 25.4 ×20 22 ×25 25.4 ×20 22 ×25 25.4 ×25 30 ×20 22 ×30 25.4 ×25 30 ×20 22 ×35 25.4 ×30 30 ×25 35 ×20 22 ×40 25.4 ×35 30 ×25 22 ×45 25.4 ×35 30 ×30 35 ×25 22 ×50 25.4 ×40 30 ×30 35 ×25 25.4 ×50 30 ×35 35 ×30 25.4 ×60 30 ×40 35 ×35 30 ×50 35 ×40 30 ×60 35 ×45 35 ×50 35 ×60 22 ×20 22 ×20 22 ×25 25.4 ×20 22 ×25 25.4 ×20 30 ×20 22 ×30 25.4 ×25 30 ×20 35 ×20 22 ×35 25.4 ×25 30 ×25 35 ×20 22 ×40 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.93 1.89 2.18 2.19 2.16 2.54 2.50 2.44 2.81 2.79 3.30 3.22 3.63 4.23 0.60 0.74 0.78 0.75 1.00 0.95 0.95 1.18 1.18 1.00 1.30 1.30 1.30 1.16 1.49 1.49 1.49 1.65 1.65 1.65 1.65 1.67 1.80 1.80 1.80 2.00 2.00 2.00 2.20 2.30 2.30 2.47 2.47 2.85 2.60 3.00 3.42 0.45 0.47 0.61 0.56 0.75 0.62 0.65 0.82 0.82 0.70 0.76 0.92 0.92 0.90 0.85 1.04 Part No. EKMM221VSN681MR35S EKMM221VSN681MA25S EKMM221VSN821MQ50S EKMM221VSN821MR40S EKMM221VSN821MA30S EKMM221VSN102MQ60S EKMM221VSN102MR45S EKMM221VSN102MA35S EKMM221VSN122MR50S EKMM221VSN122MA40S EKMM221VSN152MR60S EKMM221VSN152MA45S EKMM221VSN182MA50S EKMM221VSN222MA60S EKMM251VSN121MP20S EKMM251VSN151MQ20S EKMM251VSN181MP25S EKMM251VSN181MQ20S EKMM251VSN221MP25S EKMM251VSN221MQ25S EKMM251VSN221MR20S EKMM251VSN271MP30S EKMM251VSN271MQ25S EKMM251VSN271MR20S EKMM251VSN331MP35S EKMM251VSN331MQ30S EKMM251VSN331MR25S EKMM251VSN331MA20S EKMM251VSN391MP40S EKMM251VSN391MQ35S EKMM251VSN391MR25S EKMM251VSN471MP45S EKMM251VSN471MQ35S EKMM251VSN471MR30S EKMM251VSN471MA25S EKMM251VSN561MP50S EKMM251VSN561MQ40S EKMM251VSN561MR30S EKMM251VSN561MA25S EKMM251VSN681MQ50S EKMM251VSN681MR35S EKMM251VSN681MA30S EKMM251VSN821MQ60S EKMM251VSN821MR40S EKMM251VSN821MA35S EKMM251VSN102MR50S EKMM251VSN102MA40S EKMM251VSN122MR60S EKMM251VSN122MA45S EKMM251VSN152MA50S EKMM251VSN182MA60S EKMM3B1VSN680MP20S EKMM3B1VSN820MP20S EKMM3B1VSN101MP25S EKMM3B1VSN101MQ20S EKMM3B1VSN121MP25S EKMM3B1VSN121MQ20S EKMM3B1VSN121MR20S EKMM3B1VSN151MP30S EKMM3B1VSN151MQ25S EKMM3B1VSN151MR20S EKMM3B1VSN151MA20S EKMM3B1VSN181MP35S EKMM3B1VSN181MQ25S EKMM3B1VSN181MR25S EKMM3B1VSN181MA20S EKMM3B1VSN221MP40S WV (Vdc) 315 350 400 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 220 220 220 270 270 270 270 330 330 330 330 390 390 390 470 470 470 560 560 680 680 820 1,000 56 68 82 82 100 100 120 120 120 150 150 150 150 180 180 180 220 220 220 220 270 270 270 270 330 330 330 390 390 390 470 470 470 560 560 680 680 820 47 56 68 68 82 82 25.4 × 30 30 × 25 35 × 20 22 × 45 25.4 × 35 30 × 25 35 × 25 22 × 50 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 35 × 30 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 60 22 × 20 25.4 × 20 22 × 25 25.4 × 20 22 × 25 30 × 20 22 × 30 25.4 × 25 30 × 20 22 × 35 25.4 × 30 30 × 25 35 × 20 22 × 40 25.4 × 30 30 × 25 22 × 45 25.4 × 35 30 × 30 35 × 25 22 × 50 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 35 × 30 25.4 × 50 30 × 40 35 × 35 25.4 × 60 30 × 45 35 × 35 30 × 50 35 × 40 30 × 60 35 × 50 35 × 60 22 × 20 25.4 × 20 22 × 25 25.4 × 20 22 × 25 30 × 20 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.04 1.04 0.90 1.16 1.16 1.16 1.15 1.33 1.33 1.33 1.33 1.47 1.47 1.47 1.70 1.70 1.70 2.05 2.05 2.17 2.17 2.20 2.55 0.41 0.46 0.55 0.51 0.69 0.60 0.75 0.75 0.65 0.82 0.83 0.82 0.76 0.92 0.92 0.90 1.05 1.04 1.02 1.04 1.16 1.18 1.17 1.20 1.29 1.34 1.22 1.51 1.51 1.47 1.66 1.65 1.69 1.85 1.90 2.15 1.99 2.31 0.37 0.42 0.50 0.46 0.64 0.55 Part No. EKMM3B1VSN221MQ30S EKMM3B1VSN221MR25S EKMM3B1VSN221MA20S EKMM3B1VSN271MP45S EKMM3B1VSN271MQ35S EKMM3B1VSN271MR25S EKMM3B1VSN271MA25S EKMM3B1VSN331MP50S EKMM3B1VSN331MQ40S EKMM3B1VSN331MR30S EKMM3B1VSN331MA25S EKMM3B1VSN391MQ45S EKMM3B1VSN391MR35S EKMM3B1VSN391MA30S EKMM3B1VSN471MQ50S EKMM3B1VSN471MR40S EKMM3B1VSN471MA30S EKMM3B1VSN561MR45S EKMM3B1VSN561MA35S EKMM3B1VSN681MR50S EKMM3B1VSN681MA40S EKMM3B1VSN821MA45S EKMM3B1VSN102MA60S EKMM351VSN560MP20S EKMM351VSN680MQ20S EKMM351VSN820MP25S EKMM351VSN820MQ20S EKMM351VSN101MP25S EKMM351VSN101MR20S EKMM351VSN121MP30S EKMM351VSN121MQ25S EKMM351VSN121MR20S EKMM351VSN151MP35S EKMM351VSN151MQ30S EKMM351VSN151MR25S EKMM351VSN151MA20S EKMM351VSN181MP40S EKMM351VSN181MQ30S EKMM351VSN181MR25S EKMM351VSN221MP45S EKMM351VSN221MQ35S EKMM351VSN221MR30S EKMM351VSN221MA25S EKMM351VSN271MP50S EKMM351VSN271MQ40S EKMM351VSN271MR30S EKMM351VSN271MA25S EKMM351VSN331MQ45S EKMM351VSN331MR35S EKMM351VSN331MA30S EKMM351VSN391MQ50S EKMM351VSN391MR40S EKMM351VSN391MA35S EKMM351VSN471MQ60S EKMM351VSN471MR45S EKMM351VSN471MA35S EKMM351VSN561MR50S EKMM351VSN561MA40S EKMM351VSN681MR60S EKMM351VSN681MA50S EKMM351VSN821MA60S EKMM401VSN470MP20S EKMM401VSN560MQ20S EKMM401VSN680MP25S EKMM401VSN680MQ20S EKMM401VSN820MP25S EKMM401VSN820MR20S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105℃ KMMSeries ◆STANDARD RATINGS WV (Vdc) 400 420 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 100 100 100 120 120 120 120 150 150 150 150 180 180 180 180 220 220 220 220 270 270 270 330 330 330 390 390 390 470 470 560 560 680 47 56 68 68 82 82 82 100 100 100 120 120 120 120 150 150 150 180 22 ×30 25.4 ×25 30 ×20 22 ×35 25.4 ×25 30 ×25 35 ×20 22 ×40 25.4 ×30 30 ×25 35 ×20 22 ×45 25.4 ×35 30 ×30 35 ×25 22 ×50 25.4 ×40 30 ×30 35 ×25 25.4 ×45 30 ×35 35 ×30 25.4 ×50 30 ×40 35 ×30 25.4 ×60 30 ×45 35 ×35 30 ×50 35 ×40 30 ×60 35 ×45 35 ×60 22 ×20 25.4 ×20 22 ×25 25.4 ×20 22 ×25 25.4 ×25 30 ×20 22 ×30 25.4 ×25 30 ×20 22 ×35 25.4 ×30 30 ×25 35 ×20 22 ×40 25.4 ×35 30 ×25 22 ×45 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.70 0.70 0.60 0.75 0.75 0.73 0.75 0.88 0.88 0.88 0.80 0.98 0.98 0.98 0.98 1.10 1.10 1.10 1.10 1.22 1.22 1.22 1.44 1.44 1.44 1.51 1.60 1.60 1.90 1.90 2.10 2.12 2.27 0.37 0.42 0.50 0.46 0.64 0.58 0.53 0.70 0.70 0.59 0.75 0.75 0.73 0.67 0.88 0.88 0.88 0.95 Part No. EKMM401VSN101MP30S EKMM401VSN101MQ25S EKMM401VSN101MR20S EKMM401VSN121MP35S EKMM401VSN121MQ25S EKMM401VSN121MR25S EKMM401VSN121MA20S EKMM401VSN151MP40S EKMM401VSN151MQ30S EKMM401VSN151MR25S EKMM401VSN151MA20S EKMM401VSN181MP45S EKMM401VSN181MQ35S EKMM401VSN181MR30S EKMM401VSN181MA25S EKMM401VSN221MP50S EKMM401VSN221MQ40S EKMM401VSN221MR30S EKMM401VSN221MA25S EKMM401VSN271MQ45S EKMM401VSN271MR35S EKMM401VSN271MA30S EKMM401VSN331MQ50S EKMM401VSN331MR40S EKMM401VSN331MA30S EKMM401VSN391MQ60S EKMM401VSN391MR45S EKMM401VSN391MA35S EKMM401VSN471MR50S EKMM401VSN471MA40S EKMM401VSN561MR60S EKMM401VSN561MA45S EKMM401VSN681MA60S EKMM421VSN470MP20S EKMM421VSN560MQ20S EKMM421VSN680MP25S EKMM421VSN680MQ20S EKMM421VSN820MP25S EKMM421VSN820MQ25S EKMM421VSN820MR20S EKMM421VSN101MP30S EKMM421VSN101MQ25S EKMM421VSN101MR20S EKMM421VSN121MP35S EKMM421VSN121MQ30S EKMM421VSN121MR25S EKMM421VSN121MA20S EKMM421VSN151MP40S EKMM421VSN151MQ35S EKMM421VSN151MR25S EKMM421VSN181MP45S WV (Vdc) 420 450 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 180 180 180 220 220 220 220 270 270 270 330 330 330 390 390 470 470 560 680 56 68 68 82 82 100 100 100 120 120 120 120 150 150 150 150 180 180 180 220 220 220 270 270 270 330 330 390 390 470 560 25.4 × 35 30 × 30 35 × 25 22 × 50 25.4 × 45 30 × 35 35 × 25 25.4 × 50 30 × 40 35 × 30 25.4 × 60 30 × 45 35 × 35 30 × 50 35 × 40 30 × 60 35 × 45 35 × 50 35 × 60 22 × 25 22 × 30 25.4 × 25 22 × 30 25.4 × 25 22 × 35 25.4 × 30 30 × 25 22 × 40 25.4 × 30 30 × 25 35 × 25 22 × 45 25.4 × 35 30 × 30 35 × 25 22 × 50 25.4 × 40 30 × 30 25.4 × 45 30 × 35 35 × 30 25.4 × 60 30 × 40 35 × 35 30 × 50 35 × 40 30 × 60 35 × 40 35 × 50 35 × 60 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.95 0.95 0.94 1.10 1.10 1.10 1.10 1.22 1.22 1.22 1.41 1.45 1.45 1.55 1.55 1.79 1.90 2.15 2.27 0.40 0.53 0.50 0.64 0.64 0.69 0.69 0.64 0.80 0.80 0.80 0.73 0.88 0.88 0.88 0.75 1.00 1.00 1.00 1.12 1.12 1.12 1.18 1.28 1.28 1.45 1.45 1.51 1.55 1.85 1.91 Part No. EKMM421VSN181MQ35S EKMM421VSN181MR30S EKMM421VSN181MA25S EKMM421VSN221MP50S EKMM421VSN221MQ45S EKMM421VSN221MR35S EKMM421VSN221MA25S EKMM421VSN271MQ50S EKMM421VSN271MR40S EKMM421VSN271MA30S EKMM421VSN331MQ60S EKMM421VSN331MR45S EKMM421VSN331MA35S EKMM421VSN391MR50S EKMM421VSN391MA40S EKMM421VSN471MR60S EKMM421VSN471MA45S EKMM421VSN561MA50S EKMM421VSN681MA60S EKMM451VSN560MP25S EKMM451VSN680MP30S EKMM451VSN680MQ25S EKMM451VSN820MP30S EKMM451VSN820MQ25S EKMM451VSN101MP35S EKMM451VSN101MQ30S EKMM451VSN101MR25S EKMM451VSN121MP40S EKMM451VSN121MQ30S EKMM451VSN121MR25S EKMM451VSN121MA25S EKMM451VSN151MP45S EKMM451VSN151MQ35S EKMM451VSN151MR30S EKMM451VSN151MA25S EKMM451VSN181MP50S EKMM451VSN181MQ40S EKMM451VSN181MR30S EKMM451VSN221MQ45S EKMM451VSN221MR35S EKMM451VSN221MA30S EKMM451VSN271MQ60S EKMM451VSN271MR40S EKMM451VSN271MA35S EKMM451VSN331MR50S EKMM451VSN331MA40S EKMM451VSN391MR60S EKMM451VSN391MA40S EKMM451VSN471MA50S EKMM451VSN561MA60S ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 160 to 250Vdc 315 to 450Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS SMH Standard snap-ins, 85℃ SMM Series Downsized Longer life ・Endurance with ripple current : 2,000 hours at 85℃ ・Non solvent resistant type ・RoHS2 Compliant SMH ◆SPACIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +85℃ 6.3 to 100Vdc (at 20℃, 120Hz) ±20% (M) I=0.02CV or 3mA, whichever is smaller. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 5 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V tanδ(Max.) 0.60 0.50 0.40 0.30 0.25 0.20 0.15 0.15 0.15 (at 20℃, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V Z(-25℃)/Z(+20℃) 4 4 4 3 3 2 2 2 2 Z(-40℃)/Z(+20℃) 15 15 15 10 8 6 6 5 5 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 85℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 85℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] ●Terminal Code : LI (φ35) Negative mark φD+1max. 10 Vent 2-φ2 * 4.0±0.5 L±2 Sleeve (PET : Black) Negative mark Vent PC board pin-out (View from Solder side) 2-1.2×6 φD+1max. Sleeve (PET : Black) PC board pin-out (View from Solder side) 4.2±0.5 ●Terminal Code : VS (φ22 toφ35) : Standard 5±0.5 L±2 4.5±1 14.2±1 *φD=35mm : 3.5±0.5mm The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E SMH A A A V S N A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 820µF:821, 3,300µF:332) Dummy terminal code Terminal code Voltage code (ex. 6.3V:6R3, 63V:630, 100V:101) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard snap-ins, 85℃ SMHSeries ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 15,000 22 ×25 18,000 22 ×30 18,000 25.4 ×25 22,000 22 ×30 22,000 25.4 × 25 27,000 22 × 35 27,000 25.4 × 30 27,000 30 × 25 33,000 22 ×40 33,000 25.4 ×35 33,000 30 ×25 39,000 22 ×50 39,000 25.4 ×40 39,000 30 × 30 39,000 35 × 25 47,000 25.4 × 45 47,000 30 × 35 47,000 35 ×30 56,000 25.4 ×50 56,000 30 ×40 56,000 35 ×30 68,000 30 ×45 68,000 35 × 35 82,000 30 × 50 82,000 35 × 40 100,000 35 × 45 12,000 22 ×25 15,000 22 ×30 15,000 25.4 ×25 18,000 22 ×35 18,000 25.4 ×25 22,000 22 × 40 22,000 25.4 × 30 22,000 30 × 25 27,000 22 × 45 27,000 25.4 ×35 27,000 30 ×30 27,000 35 ×25 33,000 22 ×50 33,000 25.4 × 40 33,000 30 × 30 33,000 35 × 25 39,000 25.4 × 45 39,000 30 ×35 39,000 35 ×30 47,000 25.4 ×50 47,000 30 ×40 47,000 35 ×30 56,000 30 × 45 56,000 35 × 35 68,000 30 × 50 68,000 35 × 40 82,000 35 ×50 8,200 22×25 10,000 22 ×25 12,000 22 ×30 12,000 25.4 ×25 15,000 22 ×35 15,000 25.4 × 30 15,000 30 × 25 18,000 22 × 40 18,000 25.4 × 35 18,000 30 ×25 22,000 22 ×50 22,000 25.4 ×40 22,000 30 ×30 22,000 35 ×25 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 2.44 2.67 2.70 3.06 3.07 3.49 3.52 3.57 3.97 4.02 3.95 4.55 4.50 4.45 4.51 5.09 5.06 5.01 5.71 5.70 5.77 6.48 6.42 7.32 7.29 8.31 2.39 2.76 2.77 3.12 3.04 3.55 3.48 3.53 4.04 3.98 3.73 3.73 4.58 4.54 4.13 4.13 5.08 5.05 4.80 5.73 5.72 5.27 6.44 6.38 7.27 7.27 8.49 2.51 2.77 2.86 2.95 3.29 3.46 3.66 3.72 3.98 4.00 4.37 4.26 4.21 4.15 Part No. ESMH6R3VSN153MP25S ESMH6R3VSN183MP30S ESMH6R3VSN183MQ25S ESMH6R3VSN223MP30S ESMH6R3VSN223MQ25S ESMH6R3VSN273MP35S ESMH6R3VSN273MQ30S ESMH6R3VSN273MR25S ESMH6R3VSN333MP40S ESMH6R3VSN333MQ35S ESMH6R3VSN333MR25S ESMH6R3VSN393MP50S ESMH6R3VSN393MQ40S ESMH6R3VSN393MR30S ESMH6R3VSN393MA25S ESMH6R3VSN473MQ45S ESMH6R3VSN473MR35S ESMH6R3VSN473MA30S ESMH6R3VSN563MQ50S ESMH6R3VSN563MR40S ESMH6R3VSN563MA30S ESMH6R3VSN683MR45S ESMH6R3VSN683MA35S ESMH6R3VSN823MR50S ESMH6R3VSN823MA40S ESMH6R3VSN104MA45S ESMH100VSN123MP25S ESMH100VSN153MP30S ESMH100VSN153MQ25S ESMH100VSN183MP35S ESMH100VSN183MQ25S ESMH100VSN223MP40S ESMH100VSN223MQ30S ESMH100VSN223MR25S ESMH100VSN273MP45S ESMH100VSN273MQ35S ESMH100VSN273MR30S ESMH100VSN273MA25S ESMH100VSN333MP50S ESMH100VSN333MQ40S ESMH100VSN333MR30S ESMH100VSN333MA25S ESMH100VSN393MQ45S ESMH100VSN393MR35S ESMH100VSN393MA30S ESMH100VSN473MQ50S ESMH100VSN473MR40S ESMH100VSN473MA30S ESMH100VSN563MR45S ESMH100VSN563MA35S ESMH100VSN683MR50S ESMH100VSN683MA40S ESMH100VSN823MA50S ESMH160VSN822MP25S ESMH160VSN103MP25S ESMH160VSN123MP30S ESMH160VSN123MQ25S ESMH160VSN153MP35S ESMH160VSN153MQ30S ESMH160VSN153MR25S ESMH160VSN183MP40S ESMH160VSN183MQ35S ESMH160VSN183MR25S ESMH160VSN223MP50S ESMH160VSN223MQ40S ESMH160VSN223MR30S ESMH160VSN223MA25S WV (Vdc) 16 25 35 50 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 27,000 25.4 × 45 27,000 30 × 35 27,000 35 × 30 33,000 25.4 × 50 33,000 30 × 40 33,000 35 × 30 39,000 30 × 45 39,000 35 × 35 47,000 30 × 50 47,000 35 × 40 56,000 35 × 45 68,000 35 × 50 5,600 22 × 25 6,800 22 × 30 6,800 25.4 × 25 8,200 22 × 35 8,200 25.4 × 25 10,000 22 × 40 10,000 25.4 × 30 10,000 30 × 25 12,000 22 × 45 12,000 25.4 × 35 12,000 30 × 30 12,000 35 × 25 15,000 22 × 50 15,000 25.4 × 40 15,000 30 × 30 15,000 35 × 25 18,000 25.4 × 45 18,000 30 × 35 18,000 35 × 30 22,000 25.4 × 50 22,000 30 × 45 22,000 35 × 35 27,000 30 × 50 27,000 35 × 40 33,000 35 × 45 39,000 35 × 50 3,900 22 × 25 4,700 22 × 30 4,700 25.4 × 25 5,600 22 × 35 5,600 25.4 × 25 6,800 22 × 40 6,800 25.4 × 30 6,800 30 × 25 8,200 22 × 45 8,200 25.4 × 35 8,200 30 × 30 8,200 35 × 25 10,000 22 × 50 10,000 25.4 × 40 10,000 30 × 30 10,000 35 × 25 12,000 25.4 × 45 12,000 30 × 35 12,000 35 × 30 15,000 25.4 × 50 15,000 30 × 40 15,000 35 × 35 18,000 30 × 45 18,000 35 × 40 22,000 30 × 50 22,000 35 × 45 27,000 35 × 50 2,200 22 × 25 3,300 22 × 30 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.20 0.20 4.72 4.82 4.65 5.33 5.36 5.15 6.01 5.95 6.79 6.76 7.62 8.63 2.21 2.40 2.56 2.72 2.80 3.09 3.12 3.21 3.48 3.43 3.86 3.54 4.00 3.95 4.00 3.95 4.45 4.46 4.63 5.02 5.21 5.16 5.94 5.92 6.75 7.56 2.22 2.41 2.42 2.75 2.64 2.80 2.74 2.97 3.47 3.10 3.13 2.73 3.57 3.53 3.46 3.02 3.98 4.01 4.42 4.54 4.52 5.01 4.71 5.54 5.33 6.04 6.89 1.91 2.37 Part No. ESMH160VSN273MQ45S ESMH160VSN273MR35S ESMH160VSN273MA30S ESMH160VSN333MQ50S ESMH160VSN333MR40S ESMH160VSN333MA30S ESMH160VSN393MR45S ESMH160VSN393MA35S ESMH160VSN473MR50S ESMH160VSN473MA40S ESMH160VSN563MA45S ESMH160VSN683MA50S ESMH250VSN562MP25S ESMH250VSN682MP30S ESMH250VSN682MQ25S ESMH250VSN822MP35S ESMH250VSN822MQ25S ESMH250VSN103MP40S ESMH250VSN103MQ30S ESMH250VSN103MR25S ESMH250VSN123MP45S ESMH250VSN123MQ35S ESMH250VSN123MR30S ESMH250VSN123MA25S ESMH250VSN153MP50S ESMH250VSN153MQ40S ESMH250VSN153MR30S ESMH250VSN153MA25S ESMH250VSN183MQ45S ESMH250VSN183MR35S ESMH250VSN183MA30S ESMH250VSN223MQ50S ESMH250VSN223MR45S ESMH250VSN223MA35S ESMH250VSN273MR50S ESMH250VSN273MA40S ESMH250VSN333MA45S ESMH250VSN393MA50S ESMH350VSN392MP25S ESMH350VSN472MP30S ESMH350VSN472MQ25S ESMH350VSN562MP35S ESMH350VSN562MQ25S ESMH350VSN682MP40S ESMH350VSN682MQ30S ESMH350VSN682MR25S ESMH350VSN822MP45S ESMH350VSN822MQ35S ESMH350VSN822MR30S ESMH350VSN822MA25S ESMH350VSN103MP50S ESMH350VSN103MQ40S ESMH350VSN103MR30S ESMH350VSN103MA25S ESMH350VSN123MQ45S ESMH350VSN123MR35S ESMH350VSN123MA30S ESMH350VSN153MQ50S ESMH350VSN153MR40S ESMH350VSN153MA35S ESMH350VSN183MR45S ESMH350VSN183MA40S ESMH350VSN223MR50S ESMH350VSN223MA45S ESMH350VSN273MA50S ESMH500VSN222MP25S ESMH500VSN332MP30S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard snap-ins, 85℃ SMHSeries ◆STANDARD RATINGS WV (Vdc) 50 63 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 3,300 3,900 3,900 3,900 4,700 4,700 4,700 5,600 5,600 5,600 5,600 6,800 6,800 6,800 6,800 8,200 8,200 8,200 10,000 10,000 12,000 12,000 15,000 18,000 1,800 2,200 2,200 2,700 2,700 3,300 3,300 3,300 3,900 3,900 3,900 3,900 4,700 4,700 4,700 4,700 5,600 5,600 5,600 6,800 6,800 6,800 8,200 8,200 10,000 10,000 12,000 25.4× 25 22× 35 25.4× 30 30× 25 22× 40 25.4× 35 30× 25 22× 45 25.4× 35 30× 30 35× 25 22× 50 25.4× 40 30× 35 35× 30 25.4× 50 30× 40 35× 30 30× 45 35× 35 30× 50 35× 40 35× 45 35× 50 22× 25 22× 30 25.4× 25 22× 35 25.4× 25 22× 35 25.4× 30 30× 25 22× 40 25.4× 35 30× 30 35× 25 22× 50 25.4× 40 30× 30 35× 25 25.4× 45 30× 35 35× 30 25.4× 50 30× 40 35× 30 30× 45 35× 35 30× 50 35× 40 35× 45 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 2.38 2.65 2.68 2.55 2.99 3.03 2.81 3.36 3.31 3.37 3.42 3.81 3.81 3.85 3.85 4.37 4.36 4.41 4.97 4.92 5.60 5.58 6.44 6.71 1.82 2.31 2.30 2.40 2.40 2.62 2.64 2.78 2.93 2.97 3.00 3.00 3.39 3.36 3.32 3.36 3.77 3.75 3.76 4.27 4.27 4.15 4.83 4.79 5.49 5.47 6.19 Part No. ESMH500VSN332MQ25S ESMH500VSN392MP35S ESMH500VSN392MQ30S ESMH500VSN392MR25S ESMH500VSN472MP40S ESMH500VSN472MQ35S ESMH500VSN472MR25S ESMH500VSN562MP45S ESMH500VSN562MQ35S ESMH500VSN562MR30S ESMH500VSN562MA25S ESMH500VSN682MP50S ESMH500VSN682MQ40S ESMH500VSN682MR35S ESMH500VSN682MA30S ESMH500VSN822MQ50S ESMH500VSN822MR40S ESMH500VSN822MA30S ESMH500VSN103MR45S ESMH500VSN103MA35S ESMH500VSN123MR50S ESMH500VSN123MA40S ESMH500VSN153MA45S ESMH500VSN183MA50S ESMH630VSN182MP25S ESMH630VSN222MP30S ESMH630VSN222MQ25S ESMH630VSN272MP35S ESMH630VSN272MQ25S ESMH630VSN332MP35S ESMH630VSN332MQ30S ESMH630VSN332MR25S ESMH630VSN392MP40S ESMH630VSN392MQ35S ESMH630VSN392MR30S ESMH630VSN392MA25S ESMH630VSN472MP50S ESMH630VSN472MQ40S ESMH630VSN472MR30S ESMH630VSN472MA25S ESMH630VSN562MQ45S ESMH630VSN562MR35S ESMH630VSN562MA30S ESMH630VSN682MQ50S ESMH630VSN682MR40S ESMH630VSN682MA30S ESMH630VSN822MR45S ESMH630VSN822MA35S ESMH630VSN103MR50S ESMH630VSN103MA40S ESMH630VSN123MA45S WV (Vdc) 80 100 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 85℃, 120Hz) 1,200 1,500 1,800 1,800 2,200 2,200 2,200 2,700 2,700 2,700 3,300 3,300 3,300 3,300 3,900 3,900 3,900 3,900 4,700 4,700 4,700 5,600 5,600 6,800 6,800 8,200 10,000 820 1,200 1,200 1,500 1,500 1,500 1,800 1,800 1,800 2,200 2,200 2,200 2,200 2,700 2,700 2,700 2,700 3,300 3,300 3,300 3,900 3,900 4,700 4,700 5,600 6,800 22 × 25 22 × 25 22 × 30 25.4 × 25 22 × 35 25.4 × 30 30 × 25 22 × 40 25.4 × 35 30 × 25 22 × 45 25.4 × 40 30 × 30 35 × 25 22 × 50 25.4 × 45 30 × 35 35 × 25 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 22 × 25 22 × 30 25.4 × 25 22 × 35 25.4 × 30 30 × 25 22 × 40 25.4 × 35 30 × 25 22 × 45 25.4 × 40 30 × 30 35 × 25 22 × 50 25.4 × 45 30 × 35 35 × 30 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.69 1.88 2.14 2.26 2.44 2.46 2.49 2.78 2.81 2.75 3.16 3.21 3.17 3.21 3.52 3.59 3.57 3.50 4.05 4.05 4.09 4.55 4.51 5.16 5.14 5.83 6.63 1.86 2.09 2.10 2.41 2.43 2.46 2.71 2.75 2.72 3.08 3.13 3.09 3.14 3.53 3.57 3.55 3.71 4.06 4.05 4.05 4.54 4.49 5.13 5.11 5.75 6.50 Part No. ESMH800VSN122MP25S ESMH800VSN152MP25S ESMH800VSN182MP30S ESMH800VSN182MQ25S ESMH800VSN222MP35S ESMH800VSN222MQ30S ESMH800VSN222MR25S ESMH800VSN272MP40S ESMH800VSN272MQ35S ESMH800VSN272MR25S ESMH800VSN332MP45S ESMH800VSN332MQ40S ESMH800VSN332MR30S ESMH800VSN332MA25S ESMH800VSN392MP50S ESMH800VSN392MQ45S ESMH800VSN392MR35S ESMH800VSN392MA25S ESMH800VSN472MQ50S ESMH800VSN472MR40S ESMH800VSN472MA30S ESMH800VSN562MR45S ESMH800VSN562MA35S ESMH800VSN682MR50S ESMH800VSN682MA40S ESMH800VSN822MA45S ESMH800VSN103MA50S ESMH101VSN821MP25S ESMH101VSN122MP30S ESMH101VSN122MQ25S ESMH101VSN152MP35S ESMH101VSN152MQ30S ESMH101VSN152MR25S ESMH101VSN182MP40S ESMH101VSN182MQ35S ESMH101VSN182MR25S ESMH101VSN222MP45S ESMH101VSN222MQ40S ESMH101VSN222MR30S ESMH101VSN222MA25S ESMH101VSN272MP50S ESMH101VSN272MQ45S ESMH101VSN272MR35S ESMH101VSN272MA30S ESMH101VSN332MQ50S ESMH101VSN332MR40S ESMH101VSN332MA30S ESMH101VSN392MR45S ESMH101VSN392MA35S ESMH101VSN472MR50S ESMH101VSN472MA40S ESMH101VSN562MA45S ESMH101VSN682MA50S *For the rated voltage≧160Vdc, please use SMQ series ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 6.3 to 50Vdc 63 to 100Vdc 50 0.95 0.92 120 1.00 1.00 300 1.03 1.07 1k 1.05 1.13 10k 1.08 1.19 50k 1.08 1.20 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KMH Standard snap-ins, 105℃ KMM Series Downsized Longer life ・Endurance with ripple current : 2,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant KMH ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 6.3 to 100Vdc (at 20℃, 120Hz) ±20% (M) I=0.02CV or 3mA, whichever is smaller Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 5 minutes) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V tanδ (Max.) 0.60 0.50 0.40 0.30 0.25 0.20 0.15 0.15 0.15 (at 20℃, 120Hz) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V Z(-25℃)/Z(+20℃) 4 4 4 3 3 2 2 2 2 Z(-45℃)/Z(+20℃) 15 15 15 10 8 6 6 5 5 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105℃ Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] Negative mark φD+1max. 10 2-φ2 * 4.0±0.5 L±2 Vent Sleeve (PET : Brown) Negative mark Vent PC board pin-out (View from Solder side) 2-1.2×6 φD+1max. Sleeve (PET : Brown) ●Terminal Code : LI (φ35) PC board pin-out (View from Solder side) 4.2±0.5 ●Terminal Code : VS (φ22 toφ35) : Standard 5±0.5 L±2 4.5±1 14.2±1 *φD=35mm : 3.5±0.5mm The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 E KMH 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 820µF:821, 3,300µF:332) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 6.3V:6R3, 10V:100, 100V:101) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard snap-ins, 105℃ KMHSeries ◆STANDARD RATINGS WV (Vdc) 6.3 10 16 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 12,000 15,000 18,000 18,000 22,000 22,000 22,000 27,000 27,000 27,000 33,000 33,000 33,000 33,000 39,000 39,000 39,000 47,000 47,000 47,000 56,000 56,000 68,000 68,000 82,000 10,000 12,000 15,000 15,000 18,000 18,000 22,000 22,000 22,000 27,000 27,000 27,000 27,000 33,000 33,000 33,000 39,000 39,000 39,000 47,000 47,000 56,000 56,000 68,000 6,800 10,000 10,000 12,000 12,000 12,000 15,000 15,000 15,000 18,000 18,000 18,000 18,000 22,000 22,000 22,000 27,000 27,000 22× 25 22× 25 22× 30 25.4× 25 22× 35 25.4× 30 30× 25 22× 40 25.4× 35 30× 25 22× 45 25.4× 40 30× 30 35× 25 25.4× 40 30× 35 35× 30 25.4× 50 30× 40 35× 30 30× 45 35× 35 30× 50 35× 40 35× 45 22× 25 22× 30 22× 30 25.4× 25 22× 35 25.4× 30 22× 40 25.4× 35 30× 25 22× 50 25.4× 40 30× 30 35× 25 25.4× 45 30× 35 35× 30 25.4× 50 30× 40 35× 30 30× 45 35× 35 30× 50 35× 40 35× 50 22× 25 22× 30 25.4× 25 22× 35 25.4× 30 30× 25 22× 40 25.4× 35 30× 25 22× 45 25.4× 40 30× 30 35× 25 25.4× 45 30× 35 35× 25 25.4× 50 30× 40 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 1.54 1.72 1.95 1.96 2.23 2.25 2.28 2.54 2.57 2.52 2.88 2.93 2.89 2.93 3.18 3.26 3.40 3.69 3.69 3.73 4.16 4.12 4.71 4.69 5.32 1.55 1.77 1.97 1.96 2.21 2.23 2.51 2.54 2.40 2.93 2.90 2.87 2.73 3.30 3.28 3.16 3.68 3.69 3.43 4.17 3.76 4.68 4.67 5.46 1.57 1.97 1.97 2.22 2.24 2.45 2.55 2.58 2.52 2.87 2.92 2.88 2.92 3.32 3.29 3.23 3.78 3.77 Part No. EKMH6R3VSN123MP25S EKMH6R3VSN153MP25S EKMH6R3VSN183MP30S EKMH6R3VSN183MQ25S EKMH6R3VSN223MP35S EKMH6R3VSN223MQ30S EKMH6R3VSN223MR25S EKMH6R3VSN273MP40S EKMH6R3VSN273MQ35S EKMH6R3VSN273MR25S EKMH6R3VSN333MP45S EKMH6R3VSN333MQ40S EKMH6R3VSN333MR30S EKMH6R3VSN333MA25S EKMH6R3VSN393MQ40S EKMH6R3VSN393MR35S EKMH6R3VSN393MA30S EKMH6R3VSN473MQ50S EKMH6R3VSN473MR40S EKMH6R3VSN473MA30S EKMH6R3VSN563MR45S EKMH6R3VSN563MA35S EKMH6R3VSN683MR50S EKMH6R3VSN683MA40S EKMH6R3VSN823MA45S EKMH100VSN103MP25S EKMH100VSN123MP30S EKMH100VSN153MP30S EKMH100VSN153MQ25S EKMH100VSN183MP35S EKMH100VSN183MQ30S EKMH100VSN223MP40S EKMH100VSN223MQ35S EKMH100VSN223MR25S EKMH100VSN273MP50S EKMH100VSN273MQ40S EKMH100VSN273MR30S EKMH100VSN273MA25S EKMH100VSN333MQ45S EKMH100VSN333MR35S EKMH100VSN333MA30S EKMH100VSN393MQ50S EKMH100VSN393MR40S EKMH100VSN393MA30S EKMH100VSN473MR45S EKMH100VSN473MA35S EKMH100VSN563MR50S EKMH100VSN563MA40S EKMH100VSN683MA50S EKMH160VSN682MP25S EKMH160VSN103MP30S EKMH160VSN103MQ25S EKMH160VSN123MP35S EKMH160VSN123MQ30S EKMH160VSN123MR25S EKMH160VSN153MP40S EKMH160VSN153MQ35S EKMH160VSN153MR25S EKMH160VSN183MP45S EKMH160VSN183MQ40S EKMH160VSN183MR30S EKMH160VSN183MA25S EKMH160VSN223MQ45S EKMH160VSN223MR35S EKMH160VSN223MA25S EKMH160VSN273MQ50S EKMH160VSN273MR40S WV (Vdc) 16 25 35 50 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 27,000 33,000 33,000 39,000 39,000 47,000 4,700 5,600 6,800 6,800 8,200 8,200 8,200 10,000 10,000 10,000 12,000 12,000 12,000 12,000 15,000 15,000 15,000 18,000 18,000 18,000 22,000 22,000 27,000 33,000 3,300 3,900 4,700 4,700 5,600 5,600 5,600 6,800 6,800 6,800 8,200 8,200 8,200 8,200 10,000 10,000 10,000 12,000 12,000 12,000 15,000 15,000 18,000 22,000 1,800 2,700 2,700 3,300 3,300 3,900 3,900 3,900 4,700 4,700 4,700 4,700 5,600 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 22 × 25 22 × 25 22 × 30 25.4 × 25 22 × 35 25.4 × 30 30 × 25 22 × 40 25.4 × 35 30 × 25 22 × 45 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 35 × 30 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 35 × 45 35 × 50 22 × 25 22 × 30 22 × 30 25.4 × 25 22 × 35 25.4 × 30 30 × 25 22 × 40 25.4 × 35 30 × 25 22 × 50 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 35 × 30 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 35 × 40 35 × 50 22 × 25 22 × 30 25.4 × 25 22 × 35 25.4 × 30 22 × 40 25.4 × 35 30 × 25 22 × 45 25.4 × 35 30 × 30 35 × 25 22 × 50 0.40 0.40 0.40 0.40 0.40 0.40 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 3.45 4.30 4.26 4.81 4.79 5.43 1.50 1.63 1.86 1.87 2.11 2.12 2.15 2.39 2.42 2.37 2.69 2.74 2.70 2.74 3.15 3.13 3.27 3.54 3.54 3.58 4.04 3.64 4.73 5.39 1.40 1.57 1.72 1.80 1.95 1.96 1.99 2.20 2.23 2.19 2.55 2.53 2.75 2.75 2.87 2.90 2.91 3.24 3.23 2.99 3.72 3.67 4.37 4.92 1.33 1.69 1.70 1.93 1.85 2.16 2.18 1.95 2.43 2.39 2.25 2.48 2.75 Part No. EKMH160VSN273MA30S EKMH160VSN333MR45S EKMH160VSN333MA35S EKMH160VSN393MR50S EKMH160VSN393MA40S EKMH160VSN473MA45S EKMH250VSN472MP25S EKMH250VSN562MP25S EKMH250VSN682MP30S EKMH250VSN682MQ25S EKMH250VSN822MP35S EKMH250VSN822MQ30S EKMH250VSN822MR25S EKMH250VSN103MP40S EKMH250VSN103MQ35S EKMH250VSN103MR25S EKMH250VSN123MP45S EKMH250VSN123MQ40S EKMH250VSN123MR30S EKMH250VSN123MA25S EKMH250VSN153MQ45S EKMH250VSN153MR35S EKMH250VSN153MA30S EKMH250VSN183MQ50S EKMH250VSN183MR40S EKMH250VSN183MA30S EKMH250VSN223MR45S EKMH250VSN223MA35S EKMH250VSN273MA45S EKMH250VSN333MA50S EKMH350VSN332MP25S EKMH350VSN392MP30S EKMH350VSN472MP30S EKMH350VSN472MQ25S EKMH350VSN562MP35S EKMH350VSN562MQ30S EKMH350VSN562MR25S EKMH350VSN682MP40S EKMH350VSN682MQ35S EKMH350VSN682MR25S EKMH350VSN822MP50S EKMH350VSN822MQ40S EKMH350VSN822MR30S EKMH350VSN822MA25S EKMH350VSN103MQ45S EKMH350VSN103MR35S EKMH350VSN103MA30S EKMH350VSN123MQ50S EKMH350VSN123MR40S EKMH350VSN123MA30S EKMH350VSN153MR45S EKMH350VSN153MA35S EKMH350VSN183MA40S EKMH350VSN223MA50S EKMH500VSN182MP25S EKMH500VSN272MP30S EKMH500VSN272MQ25S EKMH500VSN332MP35S EKMH500VSN332MQ30S EKMH500VSN392MP40S EKMH500VSN392MQ35S EKMH500VSN392MR25S EKMH500VSN472MP45S EKMH500VSN472MQ35S EKMH500VSN472MR30S EKMH500VSN472MA25S EKMH500VSN562MP50S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard snap-ins, 105℃ KMHSeries ◆STANDARD RATINGS WV (Vdc) 50 63 80 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 5,600 5,600 5,600 6,800 6,800 6,800 8,200 8,200 10,000 10,000 12,000 1,200 1,500 1,800 1,800 2,200 2,200 2,700 2,700 2,700 3,300 3,300 3,300 3,300 3,900 3,900 3,900 4,700 4,700 4,700 5,600 5,600 6,800 6,800 8,200 10,000 820 1,000 1,200 1,200 1,500 1,500 1,800 25.4× 40 30× 35 35× 25 25.4× 50 30× 40 35× 30 30× 45 35× 35 30× 50 35× 40 35× 45 22× 25 22× 25 22× 30 25.4× 25 22× 35 25.4× 30 22× 40 25.4× 35 30× 25 22× 50 25.4× 40 30× 30 35× 25 25.4× 45 30× 35 35× 25 25.4× 50 30× 40 35× 30 30× 45 35× 35 30× 50 35× 40 35× 45 35× 50 22× 25 22× 25 22× 30 25.4× 25 22× 35 25.4× 30 22× 40 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 2.70 2.76 2.70 3.30 3.30 3.25 3.60 3.55 4.04 4.03 4.55 1.19 1.33 1.51 1.52 1.73 1.74 1.97 1.99 1.76 2.29 2.27 2.24 2.06 2.54 2.55 2.24 2.86 2.86 2.79 3.22 3.19 3.65 3.64 3.90 4.40 1.11 1.22 1.38 1.39 1.59 1.61 1.80 Part No. EKMH500VSN562MQ40S EKMH500VSN562MR35S EKMH500VSN562MA25S EKMH500VSN682MQ50S EKMH500VSN682MR40S EKMH500VSN682MA30S EKMH500VSN822MR45S EKMH500VSN822MA35S EKMH500VSN103MR50S EKMH500VSN103MA40S EKMH500VSN123MA45S EKMH630VSN122MP25S EKMH630VSN152MP25S EKMH630VSN182MP30S EKMH630VSN182MQ25S EKMH630VSN222MP35S EKMH630VSN222MQ30S EKMH630VSN272MP40S EKMH630VSN272MQ35S EKMH630VSN272MR25S EKMH630VSN332MP50S EKMH630VSN332MQ40S EKMH630VSN332MR30S EKMH630VSN332MA25S EKMH630VSN392MQ45S EKMH630VSN392MR35S EKMH630VSN392MA25S EKMH630VSN472MQ50S EKMH630VSN472MR40S EKMH630VSN472MA30S EKMH630VSN562MR45S EKMH630VSN562MA35S EKMH630VSN682MR50S EKMH630VSN682MA40S EKMH630VSN822MA45S EKMH630VSN103MA50S EKMH800VSN821MP25S EKMH800VSN102MP25S EKMH800VSN122MP30S EKMH800VSN122MQ25S EKMH800VSN152MP35S EKMH800VSN152MQ30S EKMH800VSN182MP40S WV (Vdc) 80 100 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 1,800 1,800 2,200 2,200 2,200 2,200 2,700 2,700 2,700 3,300 3,300 3,300 3,900 3,900 4,700 4,700 5,600 6,800 560 820 820 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,500 1,500 1,800 1,800 1,800 2,200 2,200 2,200 2,700 2,700 3,300 3,300 3,900 4,700 25.4 × 30 30 × 25 22 × 45 25.4 × 35 30 × 30 35 × 25 25.4 × 45 30 × 35 35 × 25 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 22 × 25 22 × 30 25.4 × 25 22 × 35 25.4 × 30 22 × 40 25.4 × 35 30 × 25 22 × 45 25.4 × 40 30 × 30 35 × 25 25.4 × 45 30 × 35 35 × 25 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.76 1.65 2.04 2.01 2.05 2.07 2.36 2.35 2.29 2.68 2.68 2.45 3.00 2.98 3.39 3.38 3.80 3.90 1.05 1.32 1.33 1.50 1.51 1.69 1.71 1.68 1.94 1.98 1.95 1.98 2.23 2.50 2.17 2.53 2.70 2.50 2.88 2.86 3.28 3.27 3.67 3.80 Part No. EKMH800VSN182MQ30S EKMH800VSN182MR25S EKMH800VSN222MP45S EKMH800VSN222MQ35S EKMH800VSN222MR30S EKMH800VSN222MA25S EKMH800VSN272MQ45S EKMH800VSN272MR35S EKMH800VSN272MA25S EKMH800VSN332MQ50S EKMH800VSN332MR40S EKMH800VSN332MA30S EKMH800VSN392MR45S EKMH800VSN392MA35S EKMH800VSN472MR50S EKMH800VSN472MA40S EKMH800VSN562MA45S EKMH800VSN682MA50S EKMH101VSN561MP25S EKMH101VSN821MP30S EKMH101VSN821MQ25S EKMH101VSN102MP35S EKMH101VSN102MQ30S EKMH101VSN122MP40S EKMH101VSN122MQ35S EKMH101VSN122MR25S EKMH101VSN152MP45S EKMH101VSN152MQ40S EKMH101VSN152MR30S EKMH101VSN152MA25S EKMH101VSN182MQ45S EKMH101VSN182MR35S EKMH101VSN182MA25S EKMH101VSN222MQ50S EKMH101VSN222MR40S EKMH101VSN222MA30S EKMH101VSN272MR45S EKMH101VSN272MA35S EKMH101VSN332MR50S EKMH101VSN332MA40S EKMH101VSN392MA45S EKMH101VSN472MA50S *For the rated voltage≧160Vdc, please use KMR and KMQ series. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 6.3 to 50Vdc 63 to 100Vdc 50 0.95 0.92 120 1.00 1.00 300 1.03 1.07 1k 1.05 1.13 10k 1.08 1.19 50k 1.08 1.20 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS TXH Long life snap-ins, 105℃ TXH Series ・Endurance with ripple current : 10,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant Longer life LXM ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105℃ 200 to 450Vdc ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 200 to 400V 450V tanδ (Max.) 0.15 0.20 Rated voltage (Vdc) 200 to 400V 450V Z (-25℃)/Z (+20℃) 4 8 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 10,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] ●Terminal Code : VS (φ30 toφ40) : Standard Negative mark Sleeve (PET : Brown) Negative mark Vent φD+1max. φD+1max. 10 2-1.2×6 2-φ2 *4.0±0.5 L±2 PC board pin-out (View from Solder side) Vent *φD=40mm : 3.5±0.5mm 4.2±0.5 Sleeve (PET : Brown) ●Terminal Code : LI (φ35,φ40) PC board pin-out (View from Solder side) 5±0.5 L±2 ** 4.5±1 14.2±1 **φD=40mm : 4.0±1 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 E T XH 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 470µF:471, 1,000µF:102) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 200V:201 , 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105℃ TXHSeries ◆STANDARD RATINGS WV (Vdc) 200 250 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 560 680 820 820 1,000 1,000 1,000 1,200 1,200 1,500 1,500 1,800 390 470 560 680 680 820 820 820 1,000 1,000 1,200 1,200 1,500 1,800 30 ×30 30 ×35 30 ×40 35 ×30 30 ×45 35 ×35 40 ×30 35 ×40 40 ×35 35 ×50 40 ×40 40 ×50 30 ×30 30 ×35 35 ×30 30 ×45 35 ×35 30 ×50 35 ×40 40 ×30 35 ×45 40 ×35 35 ×50 40 ×40 40 ×50 40 ×60 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.50 1.70 2.00 2.00 2.20 2.20 2.17 2.40 2.45 2.81 2.79 3.24 1.30 1.42 1.58 1.80 1.76 2.03 2.01 1.96 2.30 2.27 2.55 2.53 2.96 3.39 Part No. ETXH201VSN561MR30S ETXH201VSN681MR35S ETXH201VSN821MR40S ETXH201VSN821MA30S ETXH201VSN102MR45S ETXH201VSN102MA35S ETXH201VSN102MB30S ETXH201VSN122MA40S ETXH201VSN122MB35S ETXH201VSN152MA50S ETXH201VSN152MB40S ETXH201VSN182MB50S ETXH251VSN391MR30S ETXH251VSN471MR35S ETXH251VSN561MA30S ETXH251VSN681MR45S ETXH251VSN681MA35S ETXH251VSN821MR50S ETXH251VSN821MA40S ETXH251VSN821MB30S ETXH251VSN102MA45S ETXH251VSN102MB35S ETXH251VSN122MA50S ETXH251VSN122MB40S ETXH251VSN152MB50S ETXH251VSN182MB60S WV (Vdc) 400 450 Cap (µF) 220 270 270 330 330 330 390 390 470 470 560 560 680 820 220 220 270 270 330 330 390 470 560 Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 30 × 35 30 × 40 35 × 30 30 × 45 35 × 35 40 × 30 30 × 50 35 × 40 35 × 45 40 × 35 35 × 50 40 × 40 40 × 50 40 × 60 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 40 × 60 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1.00 1.15 1.13 1.29 1.26 1.28 1.44 1.43 1.60 1.58 1.79 1.78 2.05 2.36 1.04 1.02 1.19 1.16 1.33 1.32 1.48 1.64 1.98 Part No. ETXH401VSN221MR35S ETXH401VSN271MR40S ETXH401VSN271MA30S ETXH401VSN331MR45S ETXH401VSN331MA35S ETXH401VSN331MB30S ETXH401VSN391MR50S ETXH401VSN391MA40S ETXH401VSN471MA45S ETXH401VSN471MB35S ETXH401VSN561MA50S ETXH401VSN561MB40S ETXH401VSN681MB50S ETXH401VSN821MB60S ETXH451VSN221MR40S ETXH451VSN221MA30S ETXH451VSN271MR45S ETXH451VSN271MA35S ETXH451VSN331MR50S ETXH451VSN331MA40S ETXH451VSN391MA45S ETXH451VSN471MA50S ETXH451VSN561MB60S ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 200, 250Vdc 400, 450Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LXM Long life snap-ins, 105℃ LXM Series ・Endurance with ripple current : 7,000 hours at 105℃ ・Non solvent resistant type ・RoHS2 Compliant Longer life LXQ ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -25 to +105℃ 160 to 450Vdc ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 160 to 400V 420 & 450V tanδ (Max.) 0.15 0.20 Rated voltage (Vdc) 160 to 400V 420 & 450V Z (-25℃)/Z (+20℃) 4 8 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 7,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦250% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] ●Terminal Code : VS (φ22 toφ35) : Standard Negative mark Sleeve (PET : Brown) Negative mark Vent φD+1max. φD+1max. 10 2-1.2×6 2-φ2 *4.0±0.5 L±2 PC board pin-out (View from Solder side) 4.2±0.5 Sleeve (PET : Brown) ●Terminal Code : LI (φ35) PC board pin-out (View from Solder side) Vent 5±0.5 L±2 4.5±1 14.2±1 *φD=35mm : 3.5±0.5mm The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 E L XM 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470, 2,200µF:222) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 160V:161, 315V:3B1, 450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105℃ LXMSeries ◆STANDARD RATINGS WV (Vdc) 160 180 200 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 330 390 470 470 560 560 680 680 680 820 820 820 1,000 1,000 1,200 1,200 1,200 1,500 1,500 1,800 1,800 2,200 270 330 390 390 470 470 560 560 560 680 680 680 820 820 1,000 1,000 1,000 1,200 1,200 1,500 1,500 1,800 2,200 220 270 330 330 390 390 470 470 470 560 560 560 680 680 820 820 1,000 1,000 1,200 1,200 1,500 1,800 22 ×25 22 ×30 22 ×30 25.4 ×25 22 ×35 25.4 ×30 22 ×40 25.4 ×35 30 ×25 22 ×50 25.4 ×40 30 ×30 25.4 ×45 30 ×35 25.4 ×50 30 ×40 35 ×30 30 ×45 35 ×35 30 ×50 35 ×40 35 ×50 22 ×25 22 ×30 22 ×30 25.4 ×25 22 ×35 25.4 ×30 22 ×40 25.4 ×30 30 ×25 22 ×45 25.4 ×35 30 ×30 25.4 ×40 30 ×35 25.4 ×50 30 ×35 35 ×30 30 ×45 35 ×35 30 ×50 35 ×40 35 ×45 35 ×50 22 ×25 22 ×30 22 ×30 25.4 ×25 22 ×35 25.4 ×30 22 ×40 25.4 ×30 30 ×25 22 ×45 25.4 ×35 30 ×30 25.4 ×40 30 ×30 25.4 ×45 30 ×35 30 ×45 35 ×30 30 ×50 35 ×40 35 ×45 35 ×50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 1.11 1.26 1.39 1.38 1.55 1.55 1.75 1.78 1.74 1.97 2.01 1.96 2.27 2.26 2.54 2.56 2.52 2.96 2.89 3.32 3.30 3.87 1.00 1.16 1.26 1.26 1.42 1.42 1.59 1.55 1.58 1.79 1.78 1.79 2.01 2.04 2.32 2.26 2.30 2.65 2.58 3.03 3.01 3.41 3.87 0.90 1.05 1.16 1.16 1.29 1.29 1.46 1.42 1.45 1.63 1.62 1.62 1.83 1.79 2.06 2.04 2.42 2.30 2.71 2.70 3.11 3.50 Part No. ELXM161VSN331MP25S ELXM161VSN391MP30S ELXM161VSN471MP30S ELXM161VSN471MQ25S ELXM161VSN561MP35S ELXM161VSN561MQ30S ELXM161VSN681MP40S ELXM161VSN681MQ35S ELXM161VSN681MR25S ELXM161VSN821MP50S ELXM161VSN821MQ40S ELXM161VSN821MR30S ELXM161VSN102MQ45S ELXM161VSN102MR35S ELXM161VSN122MQ50S ELXM161VSN122MR40S ELXM161VSN122MA30S ELXM161VSN152MR45S ELXM161VSN152MA35S ELXM161VSN182MR50S ELXM161VSN182MA40S ELXM161VSN222MA50S ELXM181VSN271MP25S ELXM181VSN331MP30S ELXM181VSN391MP30S ELXM181VSN391MQ25S ELXM181VSN471MP35S ELXM181VSN471MQ30S ELXM181VSN561MP40S ELXM181VSN561MQ30S ELXM181VSN561MR25S ELXM181VSN681MP45S ELXM181VSN681MQ35S ELXM181VSN681MR30S ELXM181VSN821MQ40S ELXM181VSN821MR35S ELXM181VSN102MQ50S ELXM181VSN102MR35S ELXM181VSN102MA30S ELXM181VSN122MR45S ELXM181VSN122MA35S ELXM181VSN152MR50S ELXM181VSN152MA40S ELXM181VSN182MA45S ELXM181VSN222MA50S ELXM201VSN221MP25S ELXM201VSN271MP30S ELXM201VSN331MP30S ELXM201VSN331MQ25S ELXM201VSN391MP35S ELXM201VSN391MQ30S ELXM201VSN471MP40S ELXM201VSN471MQ30S ELXM201VSN471MR25S ELXM201VSN561MP45S ELXM201VSN561MQ35S ELXM201VSN561MR30S ELXM201VSN681MQ40S ELXM201VSN681MR30S ELXM201VSN821MQ45S ELXM201VSN821MR35S ELXM201VSN102MR45S ELXM201VSN102MA30S ELXM201VSN122MR50S ELXM201VSN122MA40S ELXM201VSN152MA45S ELXM201VSN182MA50S WV (Vdc) 220 250 315 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 220 270 330 330 390 390 470 470 470 560 560 560 680 680 820 820 820 1,000 1,000 1,200 1,500 180 220 270 270 330 330 390 390 390 470 470 470 560 560 680 680 680 820 820 1,000 1,200 100 120 150 150 180 180 220 220 220 270 270 270 330 330 330 390 390 390 470 470 560 560 680 820 22 × 25 22 × 30 22 × 35 25.4 × 25 22 × 40 25.4 × 30 22 × 45 25.4 × 35 30 × 25 22 × 50 25.4 × 40 30 × 30 25.4 × 45 30 × 35 25.4 × 50 30 × 40 35 × 30 30 × 50 35 × 40 35 × 45 35 × 50 22 × 25 22 × 30 22 × 35 25.4 × 25 22 × 40 25.4 × 30 22 × 45 25.4 × 35 30 × 25 22 × 50 25.4 × 40 30 × 30 25.4 × 45 30 × 35 25.4 × 50 30 × 40 35 × 30 30 × 45 35 × 35 35 × 40 35 × 50 22 × 25 22 × 30 22 × 30 25.4 × 25 22 × 35 25.4 × 30 22 × 40 25.4 × 30 30 × 25 22 × 45 25.4 × 35 30 × 30 25.4 × 40 30 × 35 35 × 30 25.4 × 50 30 × 35 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.90 1.05 1.19 1.16 1.33 1.29 1.49 1.48 1.45 1.63 1.71 1.62 1.87 1.86 2.10 2.12 2.08 2.48 2.46 2.78 3.20 0.82 0.95 1.08 1.05 1.22 1.19 1.36 1.35 1.32 1.49 1.52 1.49 1.70 1.69 1.91 1.93 1.90 2.19 2.13 2.46 2.86 0.67 0.77 0.86 0.85 0.96 0.96 1.09 1.06 1.08 1.24 1.23 1.23 1.40 1.42 1.45 1.59 1.54 1.57 1.81 1.77 2.03 2.02 2.29 2.59 Part No. ELXM221VSN221MP25S ELXM221VSN271MP30S ELXM221VSN331MP35S ELXM221VSN331MQ25S ELXM221VSN391MP40S ELXM221VSN391MQ30S ELXM221VSN471MP45S ELXM221VSN471MQ35S ELXM221VSN471MR25S ELXM221VSN561MP50S ELXM221VSN561MQ40S ELXM221VSN561MR30S ELXM221VSN681MQ45S ELXM221VSN681MR35S ELXM221VSN821MQ50S ELXM221VSN821MR40S ELXM221VSN821MA30S ELXM221VSN102MR50S ELXM221VSN102MA40S ELXM221VSN122MA45S ELXM221VSN152MA50S ELXM251VSN181MP25S ELXM251VSN221MP30S ELXM251VSN271MP35S ELXM251VSN271MQ25S ELXM251VSN331MP40S ELXM251VSN331MQ30S ELXM251VSN391MP45S ELXM251VSN391MQ35S ELXM251VSN391MR25S ELXM251VSN471MP50S ELXM251VSN471MQ40S ELXM251VSN471MR30S ELXM251VSN561MQ45S ELXM251VSN561MR35S ELXM251VSN681MQ50S ELXM251VSN681MR40S ELXM251VSN681MA30S ELXM251VSN821MR45S ELXM251VSN821MA35S ELXM251VSN102MA40S ELXM251VSN122MA50S ELXM3B1VSN101MP25S ELXM3B1VSN121MP30S ELXM3B1VSN151MP30S ELXM3B1VSN151MQ25S ELXM3B1VSN181MP35S ELXM3B1VSN181MQ30S ELXM3B1VSN221MP40S ELXM3B1VSN221MQ30S ELXM3B1VSN221MR25S ELXM3B1VSN271MP45S ELXM3B1VSN271MQ35S ELXM3B1VSN271MR30S ELXM3B1VSN331MQ40S ELXM3B1VSN331MR35S ELXM3B1VSN331MA30S ELXM3B1VSN391MQ50S ELXM3B1VSN391MR35S ELXM3B1VSN391MA30S ELXM3B1VSN471MR45S ELXM3B1VSN471MA35S ELXM3B1VSN561MR50S ELXM3B1VSN561MA40S ELXM3B1VSN681MA45S ELXM3B1VSN821MA50S Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105℃ LXMSeries ◆STANDARD RATINGS WV (Vdc) 350 400 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 100 120 120 150 150 180 180 180 220 220 220 270 270 330 330 330 390 390 470 470 560 680 68 82 100 100 120 120 150 150 150 180 180 180 220 220 270 270 270 330 330 390 390 470 560 22 ×25 22×30 25.4×25 22×35 25.4×30 22×40 25.4×30 30×25 22×45 25.4×35 30×30 25.4×40 30×35 25.4×45 30×35 35×30 30×40 35×35 30×50 35×40 35×40 35×50 22×25 22×30 22×30 25.4×25 22×35 25.4×30 22×40 25.4×30 30×25 22×45 25.4×35 30×30 25.4×40 30×35 25.4×50 30×40 35×30 30×45 35×35 30×50 35×40 35×45 35×50 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.67 0.77 0.76 0.88 0.88 0.99 0.96 0.98 1.12 1.11 1.11 1.26 1.28 1.40 1.42 1.45 1.60 1.61 1.86 1.85 2.02 2.36 0.55 0.63 0.70 0.70 0.79 0.79 0.90 0.88 0.90 0.99 1.01 1.01 1.14 1.16 1.32 1.33 1.31 1.52 1.48 1.69 1.68 1.91 2.14 Part No. ELXM351VSN101MP25S ELXM351VSN121MP30S ELXM351VSN121MQ25S ELXM351VSN151MP35S ELXM351VSN151MQ30S ELXM351VSN181MP40S ELXM351VSN181MQ30S ELXM351VSN181MR25S ELXM351VSN221MP45S ELXM351VSN221MQ35S ELXM351VSN221MR30S ELXM351VSN271MQ40S ELXM351VSN271MR35S ELXM351VSN331MQ45S ELXM351VSN331MR35S ELXM351VSN331MA30S ELXM351VSN391MR40S ELXM351VSN391MA35S ELXM351VSN471MR50S ELXM351VSN471MA40S ELXM351VSN561MA40S ELXM351VSN681MA50S ELXM401VSN680MP25S ELXM401VSN820MP30S ELXM401VSN101MP30S ELXM401VSN101MQ25S ELXM401VSN121MP35S ELXM401VSN121MQ30S ELXM401VSN151MP40S ELXM401VSN151MQ30S ELXM401VSN151MR25S ELXM401VSN181MP45S ELXM401VSN181MQ35S ELXM401VSN181MR30S ELXM401VSN221MQ40S ELXM401VSN221MR35S ELXM401VSN271MQ50S ELXM401VSN271MR40S ELXM401VSN271MA30S ELXM401VSN331MR45S ELXM401VSN331MA35S ELXM401VSN391MR50S ELXM401VSN391MA40S ELXM401VSN471MA45S ELXM401VSN561MA50S WV (Vdc) 420 450 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 56 68 82 82 100 100 120 120 120 150 150 150 180 180 220 220 220 270 270 330 330 390 470 47 56 68 68 82 82 100 100 100 120 120 120 150 150 180 180 180 220 220 270 270 330 390 22 × 25 22 × 30 22 × 30 25.4 × 25 22 × 35 25.4 × 30 22 × 40 25.4 × 30 30 × 25 22 × 45 25.4 × 35 30 × 30 25.4 × 40 30 × 35 25.4 × 50 30 × 35 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 22 × 25 22 × 30 22 × 30 25.4 × 25 22 × 35 25.4 × 30 22 × 40 25.4 × 30 30 × 25 22 × 45 25.4 × 35 30 × 30 25.4 × 40 30 × 35 25.4 × 45 30 × 35 35 × 30 30 × 40 35 × 35 30 × 50 35 × 40 35 × 45 35 × 50 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.50 0.58 0.63 0.63 0.72 0.72 0.81 0.79 0.80 0.92 0.92 0.92 1.03 1.05 1.19 1.16 1.18 1.38 1.34 1.56 1.55 1.74 1.96 0.46 0.52 0.58 0.58 0.65 0.65 0.74 0.72 0.73 0.83 0.82 0.82 0.94 0.96 1.06 1.05 1.07 1.20 1.21 1.41 1.40 1.60 1.79 Part No. ELXM421VSN560MP25S ELXM421VSN680MP30S ELXM421VSN820MP30S ELXM421VSN820MQ25S ELXM421VSN101MP35S ELXM421VSN101MQ30S ELXM421VSN121MP40S ELXM421VSN121MQ30S ELXM421VSN121MR25S ELXM421VSN151MP45S ELXM421VSN151MQ35S ELXM421VSN151MR30S ELXM421VSN181MQ40S ELXM421VSN181MR35S ELXM421VSN221MQ50S ELXM421VSN221MR35S ELXM421VSN221MA30S ELXM421VSN271MR45S ELXM421VSN271MA35S ELXM421VSN331MR50S ELXM421VSN331MA40S ELXM421VSN391MA45S ELXM421VSN471MA50S ELXM451VSN470MP25S ELXM451VSN560MP30S ELXM451VSN680MP30S ELXM451VSN680MQ25S ELXM451VSN820MP35S ELXM451VSN820MQ30S ELXM451VSN101MP40S ELXM451VSN101MQ30S ELXM451VSN101MR25S ELXM451VSN121MP45S ELXM451VSN121MQ35S ELXM451VSN121MR30S ELXM451VSN151MQ40S ELXM451VSN151MR35S ELXM451VSN181MQ45S ELXM451VSN181MR35S ELXM451VSN181MA30S ELXM451VSN221MR40S ELXM451VSN221MA35S ELXM451VSN271MR50S ELXM451VSN271MA40S ELXM451VSN331MA45S ELXM451VSN391MA50S ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 160 to 250Vdc 315 to 450Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LHJ High ripple snap-ins, 105℃ New! Series LHJ ・Higher ripple current from LXS series ・Endurance with ripple current : 5,000 hours at 105℃ ・Rated voltage range : 400 to 450Vdc, Capacitance range : 220 to 810µF ・For inverter control, switching power supplies ・Non solvent resistant type ・RoHS2 Compliant Higher ripple LXS ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 400 to 450Vdc (at 20℃, 120Hz) ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 5 minutes) Rated voltage (Vdc) 400V 420 & 450V tanδ(Max.) 0.15 0.20 (at 20℃, 120Hz) Rated voltage (Vdc) 400V 420 & 450V Z(-25℃)/Z(+20℃) 3 8 Z(-40℃)/Z(+20℃) 12 14 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] Negative mark φD+1max. 10 2-φ2 4.0±0.5 L±2.5 Vent Sleeve (PVC : Brown) Negative mark Vent PC board pin-out (View from Solder side) 2-1.2×6 φD+1max. Sleeve (PVC : Brown) ●Terminal Code : LI (φ35) PC board pin-out (View from Solder side) 4.2±0.5 ●Terminal Code : VS (φ30, φ35) : Standard 5±0.5 L±2.5 4.5±1 14.2±1 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 E LHJ 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 400µF:401, 470µF:471) Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 400V:401,450V:451) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS High ripple snap-ins, 105℃ LHJSeries New! ◆STANDARD RATINGS WV (Vdc) 400 420 Cap (µF) Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 280 350 400 400 470 500 510 570 570 670 720 810 240 300 340 350 410 430 30 ×35 30 ×41 30 ×46 35 ×35 30 ×51 35 ×41 30 ×54 30 ×59 35 ×46 35 ×51 35 ×54 35 ×59 30 ×35 30 ×41 30 ×46 35 ×35 30 ×51 35 ×41 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 2.31 2.67 2.92 2.92 3.23 3.39 3.41 3.66 3.70 4.12 4.32 4.66 2.07 2.39 2.60 2.57 2.92 2.95 Part No. ELHJ401VSN281MR35M ELHJ401VSN351MR41M ELHJ401VSN401MR46M ELHJ401VSN401MA35M ELHJ401VSN471MR51M ELHJ401VSN501MA41M ELHJ401VSN511MR54M ELHJ401VSN571MR59M ELHJ401VSN571MA46M ELHJ401VSN671MA51M ELHJ401VSN721MA54M ELHJ401VSN811MA59M ELHJ421VSN241MR35M ELHJ421VSN301MR41M ELHJ421VSN341MR46M ELHJ421VSN351MA35M ELHJ421VSN411MR51M ELHJ421VSN431MA41M WV (Vdc) 420 450 Cap (µF) 440 490 490 580 620 700 220 280 310 320 370 400 400 450 450 530 570 640 Rated ripple current Case size tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 30 × 54 30 × 59 35 × 46 35 × 51 35 × 54 35 × 59 30 × 35 30 × 41 30 × 46 35 × 35 30 × 51 30 × 54 35 × 41 30 × 59 35 × 46 35 × 51 35 × 54 35 × 59 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 3.06 3.28 3.22 3.60 3.76 4.06 1.98 2.31 2.48 2.45 2.77 2.91 2.85 3.14 3.09 3.44 3.61 3.89 Part No. ELHJ421VSN441MR54M ELHJ421VSN491MR59M ELHJ421VSN491MA46M ELHJ421VSN581MA51M ELHJ421VSN621MA54M ELHJ421VSN701MA59M ELHJ451VSN221MR35M ELHJ451VSN281MR41M ELHJ451VSN311MR46M ELHJ451VSN321MA35M ELHJ451VSN371MR51M ELHJ451VSN401MR54M ELHJ451VSN401MA41M ELHJ451VSN451MR59M ELHJ451VSN451MA46M ELHJ451VSN531MA51M ELHJ451VSN571MA54M ELHJ451VSN641MA59M ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Frequency(Hz) 400 to 450V 50 0.72 120 1.00 300 1.21 1k 1.38 10k 1.48 50k 1.46 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS LHS Long life snap-ins, 105℃ Upgrade! Series LHS ・The lower temperature range of the category temperature range has been expended. ・For solar power generation ・Endurance with ripple current : 5,000 hours at 105℃ ・Rated voltage range : 450 to 500V ・For inverter control, switching power supplies ・Non solvent resistant type ・RoHS2 Compliant Downsizing LXS Longer life KMS ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current -40 to +105℃ 450 to 500Vdc ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 450 to 500V tanδ (Max.) 0.20 Rated voltage (Vdc) 450 to 500V Z(-25℃)/Z(+20℃) 8 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value (475, 500Vdc : ≦ 250%) Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] ●Terminal Code : LI (φ30,φ35) Sleeve (PET : Brown) Negative mark PC board pin-out (View from Solder side) Sleeve (PET : Brown) Negative mark 4.0±0.5 L±2.5 Vent φD+1max. φD+1max. 10 2-φ2 PC board pin-out (View from Solder side) 2-1.2×6 4.2±0.5 ●Terminal Code : VS (φ22 to φ35) : Standard Vent 5±0.5 L±2.5 4.5±1 14.2±1 The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 E LHS 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 100µF:101, 330µF:331) Dummy terminal code Terminal code(VS, LI) Voltage code (ex. 450V:451, 475V:4H1) Series code Category Please refer to "Product code guide (snap-in type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Return Group Chart LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life snap-ins, 105℃ LHSSeries ◆STANDARD RATINGS WV (Vdc) Cap (µF) Rated ripple Case size current tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 450 100 120 150 150 180 180 220 220 220 270 270 270 270 330 330 330 330 330 390 390 470 470 470 560 560 680 680 820 22 ×25 22 ×30 22×35 25.4×25 22×40 25.4×30 22×45 25.4×35 30×25 22×50 25.4×40 30×30 35×25 22×60 25.4×45 25.4 ×50 30×35 35×30 25.4×60 30×40 30×45 30×50 35×35 35×40 35×45 30×60 35×50 35×60 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.71 0.81 0.93 0.93 1.04 1.05 1.17 1.21 1.15 1.33 1.36 1.29 1.25 1.54 1.54 1.56 1.46 1.41 1.74 1.63 1.84 1.87 1.71 1.95 1.99 2.33 2.22 2.52 Part No. ELHS451VSN101MP25S ELHS451VSN121MP30S ELHS451VSN151MP35S ELHS451VSN151MQ25S ELHS451VSN181MP40S ELHS451VSN181MQ30S ELHS451VSN221MP45S ELHS451VSN221MQ35S ELHS451VSN221MR25S ELHS451VSN271MP50S ELHS451VSN271MQ40S ELHS451VSN271MR30S ELHS451VSN271MA25S ELHS451VSN331MP60S ELHS451VSN331MQ45S ELHS451VSN331MQ50S ELHS451VSN331MR35S ELHS451VSN331MA30S ELHS451VSN391MQ60S ELHS451VSN391MR40S ELHS451VSN471MR45S ELHS451VSN471MR50S ELHS451VSN471MA35S ELHS451VSN561MA40S ELHS451VSN561MA45S ELHS451VSN681MR60S ELHS451VSN681MA50S ELHS451VSN821MA60S WV (Vdc) 475 500 Cap (µF) 150 180 180 220 270 270 330 330 390 390 470 470 470 560 120 150 150 180 220 220 270 270 330 330 390 390 470 560 Rated ripple Case size current tanδ (Arms/ φD×L(mm) 105℃, 120Hz) 30 × 25 30 × 30 35 × 25 30 × 35 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 30 × 60 35 × 45 35 × 50 35 × 60 30 × 25 30 × 30 35 × 25 30 × 35 30 × 40 35 × 30 30 × 45 35 × 35 30 × 50 35 × 40 30 × 60 35 × 45 3
0
advertisement
Download
advertisement
Add this document to collection(s)
You can add this document to your study collection(s)
Sign in Available only to authorized usersAdd this document to saved
You can add this document to your saved list
Sign in Available only to authorized users