1. Campaign Daily Overspending
2. Fast Budget Pacing last 3 days
3. Meta not delivering
Meta not delivering - Vijay
Instructions:
TITLE: “name of the tool” - Investigation Guidance
The title will always consist of the name of the tool followed by a hyphen and “Investigation
Guidance”.
BODY: Brief Explanation
Body of the Investigation Guidance includes a Brief explanation.
The brief explanation should not be longer than 3 sentences. (380 characters). This serves as a
quick way to highlight to the user why they should use this tool to investigate (e.g. There might
be an issue with the business model eligibility which is could be causing your xxx to yyy, go to
this Tableau Report to verify the following things:)
BODY: Checks
Checks serve as the potential steps to take or areas of investigation users can review for once
inside the tool.
Keep each bullet point under 250 characters" or "Aim for a maximum of 2 lines per bullet.
- 5 Bullet Points/Checks
Max
Meta is enabled but the campaign did not deliver on Meta on the Alert Day
May be caused by multiple issues. Vijay recommends that AX or TS do that.
AS tag adops and they do the first level checks, then they are supposed to escalate. May be cold
start and setup is correct, or there may be cases where the setup is faulty, so the TS needs to go
over it. Even if the steps are performed correctly, issues may arise that disable delivery.
Previous Escalation Process: AS raises this issue to adops and then they loop in PEX, who
decides to loop in R&D if needed.
1. Go to social suite –
Link : https://socialsuite.crto.in/advertiser/1736/setup/meta?partnerId=2629
Description of what to do in that link:
Check if all the checkmarks are green in the setup.
If there’s a check in yellow (todo):
-
This means that either the setup for meta is incomplete so you should finish it up
Look for status not ready in the table that displays after a click on the dropdown.
Not Ready status means that the adset won’t deliver unless that particular issue
is resolved.
1. Go to status overview
Link: https://socialsuite.crto.in/advertiser/1736/status-overview/meta
Description: review the status icons and click on the ones that are not green.
-
Account:
Campaigns:
Catalogs:
Pixels:
Audiences:
Screenshot the items that are not green and open a ticket with the said screenshot to AdOps
Temporal: porque lo ideal seria tener algo como grafana watchdogs para identificar el issue.
Si logramos mostrar la data de grafan y exploicarla mejor, golazo hptaaa. Grafana es tremendo
pero mucha gente no entiende nada. Es una tool tremenda, con baja adoption, por esta razón.
Simplificar la conclusión que podemos sacar de cada grafica.
Hablar con Louis.
Campaign daily overspending
Depends on the business model (BO, AO, CPC, etc.)
1. Sherlock delivery tree (reco adri no volver a hacer lo que ya existe)
Comprobar la delivery del adset y que comprueben cual es el modelo de optimización. Esto va a
servir si tienes que irte a iCPC y enfocar troubleshooting para BO o para saber si es CPC o AO y
enfocarlo desde esa perspectiva continuando en el delivery tree.
2. Budget report – overview
Revisar si el spent budget esta alineado con el Budget configuration. Mira si la línea naranja
sobrepasa la verde - es importante ver si el overspend fue muy grande o si no fue tan grande
pero es constante durante varios días.
Fast Budget Pacing last 3 days
The campaign has stopped due to Budget or Spend Limit reasons before 8pm UTC for
the last 3 days in a row.
Budget controller – because you’re in BO or you have budget delivery optimized
1. go to delivery tree
Comprobar la delivery del adset y que comprueben cual es el modelo de optimización. Esto va a
servir si tienes que irte a iCPC y enfocar troubleshooting para BO o para saber si es CPC o AO
y enfocarlo desde esa perspectiva continuando en el delivery tree.
2. Budget report – delivery pacing data
Filtrar por adset y analizar si la grafica te muestra que se esta gastando demasiado rápido el
Budget o no.