lOMoARcPSD|38583351
ELEC242-W Midterm I exam W 16 solution
CT Signals and Systems (Concordia University)
Scan to open on Studocu
Studocu is not sponsored or endorsed by any college or university
Downloaded by Luis Jaimes (luisfernandodavid06@gmail.com)
lOMoARcPSD|38583351
ELEC242-W
Continuous-Time Signals and Systems
FULL NAME:
ID NUMBER:
Nick Name (maximum 8 characters):
If you provide a nick name, your grades will be announced using that nick
name, otherwise your ID number will be used.
===================================================
Instructions for Examination
• This is a closed book exam.
• Standard type calculator may be used.
• Cellular phones are not allowed.
• Questions have equal weight.
• Show all the intermediate steps of your solution.
• Make reasonable assumptions if necessary.
• You may only write on the provided answer booklet.
• Submit both answer booklet and question paper
• Available time is 75 minutes.
===================================================
Answer all 5 questions
Winter 2016
Concordia University
Downloaded by Luis Jaimes (luisfernandodavid06@gmail.com)
Midterm Exam 1
lOMoARcPSD|38583351
ELEC242-W
Continuous-Time Signals and Systems
Question 1: Consider a continuous-time system which has input of x(t ) and the output
∞
of y (t ) = ∫ e 2t + jt [x(t ) + x(t − π )]dt .
−∞
Evaluate the output signal y (t ) , if the input is x(t ) = δ (t ) .
Question 2: Consider a continuous-time system which has input of x (t ) and output
of y (t ) = x (3 − 2t ) .
If the input signal is x(t ) = t [u (t ) − u (t − 1)] , draw the input signal x (t ) and output signal
y (t ) with respect to time.
Question 3: Consider a continuous-time signal x (t ) as shown below:
Represent the signal x (t ) using a single analytical expression with the help of unit step
function u (t ) .
x(t )
2
1
-2
1
-1
2
t
-1
Question 4: Consider a continuous-time system which has input of x (t ) and output
of y (t ) = e x ( t −1) + 2 .
Prove whether this system is linear (or non-linear), time invariant (or time variant) and
causal (or non-causal) has memory (or memoryless). Justify your answers.
Question 5: Consider a continuous-time system which has input of x(t ) and output
of y (t ) = u (−t − 1) x(t )
Prove whether this system is BIBO stable (or unstable), has memory (or memoryless) and
has inverse (or not invertible). Justify your answers. If the system is invertible, find the
inverse system.
Winter 2016
Concordia University
Downloaded by Luis Jaimes (luisfernandodavid06@gmail.com)
Midterm Exam 1
lOMoARcPSD|38583351
ELEC242-W
Continuous-Time Signals and Systems
Question 1: Consider a continuous-time system which has input of x(t ) and the output
∞
of y (t ) = ∫ e 2t + jt [x(t ) + x(t − π )]dt . Evaluate the output signal y (t ) , if the input is x(t ) = δ (t ) .
−∞
Solution 1:
∞
∞
∞
∞
y (t ) = ∫ e 2t + jt [x(t ) + x(t − π )]dt = ∫ e 2t + jt [δ (t ) + δ (t − π )]dt = ∫ e 2t + jt δ (t )dt + ∫ e 2t + jt δ (t − π )dt =
−∞
−∞
∞
−∞
∞
∞
−∞
∞
y (t ) = ∫ e 0δ (t )dt + ∫ e 2π + jπ δ (t − π )dt = e 0 ∫ δ (t )dt + e 2π + jπ ∫ δ (t − π )dt = 1 + e 2π + jπ =
−∞
y (t ) = 1 + e
−∞
2π + jπ
−∞
2π
=1+ e e
jπ
=1+ e
2π
−∞
[cos(π ) + j sin (π )] = 1 + e 2π [− 1 + 0] = 1 + e 2π
y (t ) = 1 + e 2π
Question 2: Consider a continuous-time system which has input of x (t ) and output
of y (t ) = x (3 − 2t ) . If the input signal is x(t ) = t [u (t ) − u (t − 1)] , draw the input signal
x (t ) and output signal y (t ) with respect to time.
Solution 2:
x(t )
1
t
-1
1
-2
x(t + 3)
1
-3
-2
-2
t
-1
x( 2t + 3)
1
-3
-2
-2
t
-1
y (t ) = x(−2t + 3)
1
t
-2
Winter 2016
1
2
Concordia University
Downloaded by Luis Jaimes (luisfernandodavid06@gmail.com)
Midterm Exam 1
lOMoARcPSD|38583351
ELEC242-W
Continuous-Time Signals and Systems
Question 3: Consider a continuous-time signal x (t ) as shown below:
x(t )
2
1
-2
1
-1
2
t
-1
Represent the signal x (t ) using a single analytical expression with the help of unit step
function u (t ) .
Solution 3: We can write x(t ) = x1 (t ) − x 2 (t ) , if x1 (t ) and x2 (t ) are as shown below:
x1 (t )
2
1
-2
1
-1
2
t
-1
From the above figure, we can write:
x1 (t ) = (−t + 1)[u (t + 1) − u (t − 1)] or x1 (t ) = (−t + 1)[u (−t + 1) − u (−t − 1)]
x 2 (t )
2
1
-2
1
-1
2
t
-1
From the above figure, we can write:
x 2 (t ) = [u (t + 2) − u (t + 1)] or x 2 (t ) = u (−t − 1) − u (−t − 2)
Therefore:
x(t ) = x1 (t ) − x 2 (t ) = (−t + 1)[u (t + 1) − u (t − 1)] − [u (t + 2) − u (t + 1)]
Winter 2016
Concordia University
Downloaded by Luis Jaimes (luisfernandodavid06@gmail.com)
Midterm Exam 1
lOMoARcPSD|38583351
ELEC242-W
Continuous-Time Signals and Systems
Question 4: Consider a continuous-time system which has input of x (t ) and output
of y (t ) = e x ( t −1) + 2 . Prove whether this system is linear (or non-linear), time invariant (or
time variant) and causal (or non-causal). Justify your answers.
•
Linearity: Homogeneity property does not satisfy as shown with the following
example: Consider x1 (t ) = 1 , then y1 (t ) = e1 + 2 . If x 2 (t ) = 2 x1 (t ) = 2 is applied to the
system, then we have y 2 (t ) = e x2 (t −1) + 2 = e 2 + 2 . We can see that
y 2 (t ) = e 2 + 2 and y1 (t ) = e1 + 2 . And, e 2 + 2 ≠ 2 e1 + 2 which means homogeneity
property is not satisfied for this example. Therefore, the system is not linear.
(
•
)
Time Variance: To determine whether or not the system is time-invariant, we consider
arbitrary input x1 (t ) and find output as y1 (t ) = e x1 ( t −1) + 2 . Now, we find the response
to x 2 (t ) = x1 (t − t 0 ) as y 2 (t ) = e x2 ( t −1) + 2 = e x1 (t −1−t0 ) + 2 . On the other hand,
y1 (t − t 0 ) = e x1 (t −t0 −1) + 2 . Based on these two equations, y 2 (t ) = y1 (t − t 0 ) which means
the system is time invariant.
•
Causality: The system is causal since the output y(t 0 ) = e x ( t0 −1) + 2 at any arbitrary
time t 0 , is function of input at time t 0 − 1 which means output is related to inputs at time
before t 0 (and not after t 0 ). Therefore, the system is causal.
Question 5: Consider a continuous-time system which has input of x(t ) and output
of y (t ) = u (−t − 1) x(t ) . Prove whether this system is BIBO stable (or unstable), has memory
(or memoryless) and has inverse (or not invertible). Justify your answers. If the system is
invertible, find the inverse system.
•
BIBO Stability: Let B be an arbitrary positive number and let x(t ) be an arbitrary signal
bounded by B , therefore we are assuming that x(t ) < B for all values of t . Since
u (−t − 1) ≤ 1 , therefore y (t ) = u (−t − 1) x(t ) = u (−t − 1) x(t ) ≤ B for all values of t .
Therefore, the system is BIBO stable.
•
Memory: The system is memoryless since the output y (t 0 ) = u (−t 0 − 1) x(t 0 ) at any
arbitrary time t 0 , is function of input at time t 0 which means output is related to input at
the same time t 0 . Therefore, the system is memoryless.
•
Invertibility: This system is not invertible, since for two distinct inputs of
x1 (t ) = u (t ) and x 2 (t ) = u (t − 1) , the output is zero as shown:
y1 (t ) = u (−t − 1) x1 (t ) = u (−t − 1)u (t ) = 0 and y 2 (t ) = u (−t − 1) x 2 (t ) = u (−t − 1)u (t − 1) = 0
Therefore, the system is not invertible.
Winter 2016
Concordia University
Downloaded by Luis Jaimes (luisfernandodavid06@gmail.com)
Midterm Exam 1