WELDING COST ESTIMATIONS
PetroStreet
This module uses the method of calculating welding cost recommended
by Welding Specialists. Values provided by form on certain inputs are
taken from studies conducted by internationally acclaimed institutes.
Calculation No:
Joint Type:
Groove
Joint Detail:
V-Groove
Weld Process:
GTAW (root/hot) + SMAW (fill/cap)
Welding Method:
Manual
Total Weld Length:
20
m
Joint Thickness:
10
mm
Joint Dimensions
Root Gap (g):
2.4
Root Face Height (a):
1.5
mm
Groove Angle (b):
Groove Angle (ø):
mm
deg
Root Penetration (r):
1.6
mm
Radius (r1):
deg
mm
Cap Height (h):
1.5
mm
Branch Thickness (tb):
mm
Header Thick (th):
mm
37.5
mm
Thickness (t1):
Consumables:
┌ GTAW ┐
┌ SMAW ┐
Consumable Group:
Carbon & Low Alloy Steel
Consumable Spec:
ER70S-3
E7018
Gas Consumption:
0.32
Deposition Efficiency:
90
/
50
%
Operator Factor:
20
Deposition Rate:
0.36
/
1.25
kg/hr
Welding Voltage:
20
/
20
V
Welding Current:
200
/
140
A
Consumable Cost:
8
/ 8
USD/kg
Labor Cost:
30
/ 40
USD/hr
cu.m/100A.h
%
Power Characteristics:
Cost per KWh
USD
0.16
Cost Input:
Consumable Cost Basis:
Custom
Flux Cost:
Gas Cost:
USD/kg
USD/cu.m
0.85
Trade Name:
Estimated Expenditure
Welding Consumables to be purchased:
Flux Required
Gas Consumption
Power Consumption
Arc time
Manhours (Time to weld)
0.7 kg / 27.28 kg
Not Applicable
7 cu.m
37.3 kWh
1.7 hrs / 10.9 hrs
8.5 hrs / 54.5 hrs
Cost for Consumables
Cost for Flux
Cost for Gas
Cost for Power
Cost for Labor
Total Cost
224 USD
Not Applicable
6 USD
6 USD
1975 USD
2211 USD
Notes:
Calculation By:
This copy of WeldPulse® is licensed to PetroStreet
WeldPulse
Dated:
21/12/2025