sample verification
API -- ASTM287
viscosity -- ASTM445
cannon fenske viscometer
ASTM D93 (Pensky-Martens Closed Cup
Method) - this method is suitable for
liquids
For automated instruments: ASTM
D5853 / ASTM D2500 (where applicable)
or
sample preparation
clean ,dry , space
equipment , appartus
pour gently to avoid air bubbles , splash
sulfure
ASTM D4294 - Sulfur in Petroleum and
Petroleum Products by Energy-Dispersive
X-ray
ASTM D2622 - Sulfur by Wavelength
Dispersive X-ray Fluorescence (WD-XRF)
IP 496 - Equivalent to ASTM D4294
RVP
ASTM D323 - Standard Test Method for
Vapor Pressure of Petroleum Products (
Reid Method) ASTM D6377 Determination of Vapor Pressure of Crude
Oil (Automatic Method)
Determination of Sodium in Crude Oil
Standard Reference: ASTM D5863 / IP 501
Determination of Chloride in Crude Oil
Reference Method: ASTM D4929 (Parts
A & B) / IP 510
N2
Procedure (ASTM D5762 /
Chemiluminescence Method)
rep - homogeneous sample
no water , no sediments
bring to test temp
pour point
Common reference: ASTM D97 (Cleveland
Open Cup) - manual method.
Bs&W
ASTM D4007 - Standard Test Method for
Water and Sediment in Crude Oil by the
Centrifuge Method (Laboratory
Procedure).API MPMS Chapter 10.4 / IP
359 - Equivalent methods used in
petroleum
all samples must be properly labeled with
full identification details like source, date,
temperature, and sampler’s name to
maintain traceability and accuracy in lab
testing.”
TEMP
procedure
analysis
insert therm _approved
allow to stabilize
reading
temp correct
to api stnd
table 53B , 5A
verify sample integrity
TESTS
role of inspector
witness full test
equipement & tools
clean , caliberated ,id
chemicals , reagent
not expired
conditions
"Repeatability and Verification:
environment
contions stability
The test may be repeated once to confirm
repeatability within ASTM limits.