ZXA10 C6XX V1.1.0 MIB Work
Order Dispatching Process
Sorting
For more documents, please refer to Document Map：
Fixed Network Product Service Strategy
http://tsm.zte.com.cn/tsm/FileCenter/File.aspx?Mode=read&FileID=30662900
Confidential▲
LEGAL INFORMATION
By accepting this certain document of ZTE CORPORATION you agree to the following terms. If you
do not agree to the following terms, please notice that you are not allowed to use this document.
Copyright © 2019 ZTE CORPORATION. Any rights not expressly granted herein are reserved. This
document contains proprietary information of ZTE CORPORATION. Any reproduction, transfer,
distribution, use or disclosure of this document or any portion of this document, in any form by any
means, without the prior written consent of ZTE CORPORATION is prohibited.
and
are registered trademarks of ZTE CORPORATION. Aztecs
company name, logo and product names referenced herein are either trademarks or registered
trademarks of ZTE CORPORATION. Other product and company names mentioned herein may be
trademarks or trade names of their respective owners. Without the prior written consent of ZTE
CORPORATION or the third party owner thereof, anyone’s access to this document should not be
construed as granting, by implication, Preston or otherwise, any license or right to use any marks
appearing in the document.
The design of this product complies with requirements of environmental protection and personal
security. This product shall be stored, used or discarded in accordance with product manual, relevant
contract or laws and regulations in relevant country (countries).
This document is provided “as is” and “as available”. Information contained in this document is
subject to continuous update without further notice due to improvement and update of ZTE
Corporation's products and technologies.
ZTE CORPORATION
Address:
NO. 55
Hi-tech Road South Sheen P.R.China
518057
Website:
http://support.zte.com.cn
Email:
800@zte.com.cn
All rights reserved. No spreading without permission of ZTE.
Page 2
Confidential▲
Revision History
Product Version
Document Version
Serial Number
Reason for Revision
First published
Modules added
Author
Document Version
Date
Prepared by
1.0
2019-5-10
Lin Guoxin
Reviewed by
Approved by
1.1
All rights reserved. No spreading without permission of ZTE.
Page 3
Confidential▲
Applicable to: PON-OLT commissioning & maintenance personnel
Proposal: Before reading this document, it is recommended to understand the
following knowledge and skills
SEQ
Knowledge and skills
Reference material
1
2
3
Follow-up document: After read this document, you may need the following
information
SEQ
Reference Material
Information
1
2
3
All rights reserved. No spreading without permission of ZTE.
Page 4
Confidential▲
About this document
Abstract
Chapter
错误!未找到引用源。
Description
错误!未找到引用
源。
错误!未找到引用源。
错误!未找到引用
源。
错误!未找到引用源。
错误!未找到引用
源。
错误!未找到引用源。
错误!未找到引用
源。
错误!未找到引用源。 错误!未找到引用
源。
All rights reserved. No spreading without permission of ZTE.
Page 5
Confidential▲
Contents
1. OVERVIEW ....................................................................................................................................... 7
2. SNMP CONFIGURATION IN C600 SYSTEM .......................................................................... 7
3. WORK ORDER DISPATCHING PROCESS ................................................................................ 9
1. USE OID OF V1.0 OR V1.1.0 VERSION TO DISPATCH ..................................................................... 9
(1)ONU Registration-related Configuration.......................................................... 9
(2)Configure TCONT .................................................................................................. 11
(3)Configure GEMPORT ............................................................................................ 12
(4)Create services under the remote management .......................................... 14
(5)Configure interface under the remote management .................................. 16
(6)Configure Service-port ........................................................................................ 19
(7)Configure multicast data ..................................................................................... 21
(8)Show OID dispatching configuration results ................................................. 25
2. DISPATCHING METHOD VIA NORTHBOUND INTERFACE ................................................................. 26
(1)Add ONU ................................................................................................................. 26
(2)Configure service VLAN ...................................................................................... 26
(3)Create bandwidth profile .................................................................................... 26
(4)Delete ONU............................................................................................................. 26
All rights reserved. No spreading without permission of ZTE.
Page 6
Confidential▲
1. Overview
With the deployment of the customer’s integrated EMS system, most work
order procedures are modified to access the OLT directly for work order
deployment through SNMP mode. In this case, the OLT needs to directly
interconnect with the third-party EMS, and adopt snmp to access the OLT. Because
each manufacturer has its own SNMP OID and its usage method, the
interconnection test is required in each province. In addition, these OIDs may be
modified for each version and different equipment types. For this, you need to
confirm OID and perform interconnection test. This document mainly describes the
work order deployment flowchart in C600V1.0.0 and C600V1.1.0 version.
In addition, C600 V1.0.0 is the first version of C6xx, MIB is not compatible with
MIB of the original C300, but is the same as C300 for most OID nodes. For the C600
series, there is no compatibility problem because it is the first version. While C6xx
V1.1.0 is the second version, which includes C600\C620\C650 products. Its MIB is
basically consistent with C600V1.0.0.
Service model:
The service model recommended by C600 is multiple TCONTs + multiple
GEMPORTs, each service has one GEMPORT, and then the whole ONU shares one
VPORT. Under the VPORT, one Service-port is created for each service.
All rights reserved. No spreading without permission of ZTE.
Page 7
Confidential▲
2. SNMP Configuration in C600 System
Like C300, C600 supports EMS U31 management and third-party EMS
management, but it is connected with the NE via SNMP, no matter whether it is ZTE
EMS management or third-party EMS management. At present, the EMS versions
supporting C600 NE management is T125 or later versions. After the NE is added
on EMS, configure the community name and view. Note case-sensitive. By default,
the C600 system snmp all version is disabled, so you need to configure snmp
version enable on the NE. Following are how to configure snmp v2c enable, and
configure community name, view and configure trap server and so on. By default,
all snmp versions of the C600 system are disable. It is necessary to configure enable
for snmp on the NE. The following is to configure snmp v2c enable, and configure
community name, view domain and trap server.
ZXAN#config t
ZXAN(config)#snmp-server version v2c enable
--------------Enable snmp v2
ZXAN(config)#snmp-server community public1 view AllView rw ---------Configure community
name, which can be configured successfully, but community name will prompt to require to use a
strong password.
%Info 8024: It can be successful, but the community had better satisfy the follo
wing conditions:be longer than six,include numbers capitals and lowercases !
ZXAN(config)#snmp-server host 198.10.10.10 trap version 2c public ----Configure trap server,
and its community name is public
ZXAN(config)#show snmp config
snmp-server
community
encrypted
d6ddeaa4dab74523b246fe346c94c31ae58b79ad4776396438ea1e9bb01a9ef3 view AllView rw
snmp-server engine-id is 830900020300010289d64401
snmp-server
host
198.10.10.10
trap
version
2c
d6ddeaa4dab74523b246fe346c94c31ae58b79ad4776396438ea1e9bb01a9ef3
encrypted
udp-port
162
snmp bgp mac ospf stp ppp arp rmon
udld cfm efm lacp mc-elam tcp sctp stalarm cps interface acl fib pim isis rip msdp aps config am
um system ldp pwe3 vpn mpls-oam ptp tunnel-te radius dhcp bfd ippool n
All rights reserved. No spreading without permission of ZTE.
Page 8
Confidential▲
tp ssm sqa ipsec cgn vrrp ftp_tftp ping-trace gm
snmp-server packetsize is 8192
snmp-server view AllView internet included
snmp-server view DefaultView system included
snmp-server security dynamic-trust-user idle-timeout 1800
snmp-server listen-port is 161
snmp-server version v2c enable
snmp-server input-limit 200
3. Work Order Dispatching Process
First, you need to know about SNMP dispatching indexes clearly, and must
ensure that indexes are calculated correctly, for this, you can refer to C600V1.0
version MIB specifications.
1. Use OID of V1.0 or V1.1.0 Version to Dispatch
(1)ONU Registration-related Configuration
Related OID and index algorithm are shown in the following table:
Function
Create and delete ONU under a certain OLT interface, configure
Description
authentication mode, authentication information and so on, and perform
basic management, consistent with C300.
MIB File
ZTE-AN-GPON-SERVICE-MIB.mib
MIB Index
.<IfIndex>.<OnuIndex>
IfIndex
Interface Level 1 index
OnuIndex
ONU ID
Name
OID
Description
zxAnGponOnuMgmtType
.1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.1
ONU type
zxAnGponOnuMgmtRegM
.1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.5
ONU
ode
registration
mode
regModeSn(1), regModePwd(2), regModeSnPlusPwd(3),
regModeRegisterId(4), regModeRegisterIdPlus8021x(5),
regModeRegisterIdPlusMutual(6), regModeHexPwd(7),
regModeSnPlusHexPwd(8), regModeLoid(9),
regModeLoidPlusPwd(10), regModeSnPlusRegisterId(11),
regModePsk(12)
zxAnGponOnuMgmtSn
.1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.6
ONU SN
zxAnGponOnuMgmtPwd
.1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.7
ONU password
All rights reserved. No spreading without permission of ZTE.
Page 9
Confidential▲
zxAnGponOnuMgmtLoid
.1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.8
ONU LOID
zxAnGponOnuMgmtRegist
.1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.9
ONU
rationId
zxAnGponOnuMgmtRowSt
registration ID
.1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.50
atus
Creating
/
deleting
operation
The least OIDs needed for dispatching to create an ONU:
1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.1--------ONU type
1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.5--------ONU authentication mode
1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.6, 7, 8, 9--------Choose and authentication
The authentication type value matched by the mode. This value is related to
authentication mode.
Note: If the authentication value is SN, first 4 bytes are ASCII codes, last 4 bytes are
8-bit hexadecimal numbers; if it is LOID or PW, the whole character string need to
be converted into ASCII codes; if it is HPW, it is a hexadecimal number;
1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.50---------Creating / deleting operation, if its
value is 4, it is to create, 6 is to delete.
Example:
This operation needs multiple variables to be dispatched at the same time:
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.1.285278465.4
ZTE-F601 (Here, the parameter is a common character string, for example, the previous
parameter is ZTE-F601, in Mib Browser, directly enter the character string, formats entered via
other compiling software may be different)
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.5.285278465.4 1
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.6.285278465.4
5A54454712345678 (Here, the SN parameter’s first 4 bytes are hexadecimal ASCII codes, last 4
bytes are hexadecimal numbers, for example, the previous parameter is ZTEG12345678, but in
Mib Browser, it needs to be entered according to following format ’5A:54:45:47:12:34:56:78’,
Note: Formats entered via each compiling software may be different)
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.50.285278465.4 4
All rights reserved. No spreading without permission of ZTE.
Page 10
Confidential▲
As shown in the following figure, it is the execution effect by using Mib Browser
compiling software:
(2)Configure TCONT
Related OID and index algorithm are shown in the following table:
Function
Configure T-CONT, consistent with C300
Description
MIB File
ZTE-AN-GPON-SERVICE-MIB.mib
MIB Index
.<IfIndex>.<OnuIndex>.<TcontIndex>
IfIndex
Interface Level 1 index
OnuIndex
ONU ID
TcontIndex
T-CONT index
Name
zxAnGponSrvTcontBwPrfName
OID
.1.3.6.1.4.1.3902.1082.500.10.2.3.4.1.3
Description
Bandwidth
profile
name
zxAnGponSrvTcontRowStatus
.1.3.6.1.4.1.3902.1082.500.10.2.3.4.1.50
Creating
deleting
All rights reserved. No spreading without permission of ZTE.
Page 11
/
Confidential▲
operation
The least OIDs needed for dispatching to create a TCONT:
1.3.6.1.4.1.3902.1082.500.10.2.3.4.1.3-----------Call the TCONT bandwidth profile as
ASCII code
1.3.6.1.4.1.3902.1082.500.10.2.3.4.1.50---------Creating / deleting operation, if its
value is 4, it is to create, 6 is to delete.
Example:
This operation needs multiple variables to be dispatched at the same time:
Bandwidth profile must be created on the NE in advance
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.500.10.2.3.4.1.3.285278465.4.1
‘55:50:2d:31:30:4d’
(UP-10M)
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.500.10.2.3.4.1.50.285278723.3.1 4
As shown in the following figure, it is the execution effect by using Mib Browser
compiling software:
All rights reserved. No spreading without permission of ZTE.
Page 12
Confidential▲
(3)Configure GEMPORT
Related OID and index algorithm are shown in the following table:
Function
Configure Gemport, consistent with C300
Description
MIB File
ZTE-AN-GPON-SERVICE-MIB.mib
MIB Index
.<IfIndex>.<OnuIndex>.<GemportIndex>
IfIndex
Interface Level 1 index
OnuIndex
ONU ID
GemportIndex
Gemport index
Name
OID
Description
zxAnGponSrvGemPortName
.1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.2
Gemport name
zxAnGponSrvGemPortTcontIndex
.1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.3
T-CONT index
zxAnGponSrvGemPortQueueOfTco
.1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.5
Queue that the
nt
upstream
enters T-CON
zxAnGponSrvGemPortEncrypt
.1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.9
Encrypt
zxAnGponSrvGemPortRowStatus
.1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.50
Creating
deleting
operation
The least OIDs needed for dispatching to create a GEMPORT:
1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.2-----Define the GEMPORT name, which is a character string,
directly write the character string, with no need to convert
1.3.6.1.4.13902.1082.500.10.2.3.5.1.3-----Call the TCONT created
1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.5------Set upstream TCONT queue
1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.9------Set whether to encrypt gemport, if it is 1, it is
downstream encryption, 2 is not to encrypt, 3 is upstream /downstream encryption
1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.50------Create / delete GEMPORT, 4 is to create, 6 is to delete
Example:
This operation needs multiple variables to be dispatched at the same time:
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.2.285278465.4.1 1
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.3.285278465.4.1 1
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.5.285278465.4.1 0
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.6.285278465.4.1 1
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.9.285278465.4.1 2
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.50.285278465.4.1 4
All rights reserved. No spreading without permission of ZTE.
Page 13
/
Confidential▲
As shown in the following figure, it is the execution effect by using Mib Browser
compiling software:
(4)Create services under the remote management
Related OIDs when creating a service-port:
Function
Configure mapping from user flows to gemport through creating service,
Description
consistent with C300
MIB File
ZTE-AN-GPON-REMOTE-ONU-MIB.mib
MIB Index
.<IfIndex>.<OnuIndex>.<SrvName>
IfIndex
Interface Level 1 index
OnuIndex
ONU ID
SrvName
ServiceName
Name
OID
Description
zxAnGponRmServiceGemPort
.1.3.6.1.4.1.3902.1082.500.20.2.7.2.1.2
Gemport ID
zxAnGponRmServiceMapType
.1.3.6.1.4.1.3902.1082.500.20.2.7.2.1.4
Mapping
type
cos ( 1 ), vlan (2), cosAndVlan ( 3 ), transparent ( 4), untag
(5)
zxAnGponRmServiceMapCos
.1.3.6.1.4.1.3902.1082.500.20.2.7.2.1.5
Mapping CoS
value
zxAnGponRmServiceMapVid
.1.3.6.1.4.1.3902.1082.500.20.2.7.2.1.6
Mapping
VLAN ID
All rights reserved. No spreading without permission of ZTE.
Page 14
Confidential▲
zxAnGponRmServiceRowStatus
.1.3.6.1.4.1.3902.1082.500.20.2.7.2.1.50
Creating
/
deleting
operation
The least OIDs needed for dispatching to create a service:
1.3.6.1.4.1.3902.1082.500.20.2.7.2.1.2------------Configure the mapping relationship between
service and gemport. Except pon port, the first character of onu id index, service name's index
algorithm is a decimal digit, representing the length of later character strings, next are ASCII
codes, and use“.”to separate each ASCII code in the middle.
1.3.6.1.4.1.3902.1082.500.20.2.7.2.1.4------------Configure type of mapping between service and
gemport
1.3.6.1.4.1.3902.1082.500.20.2.7.2.1.5------------Configure cos value of mapping between service
and gemport (Optional)
1.3.6.1.4.1.3902.1082.500.20.2.7.2.1.6------------Configure VLAN id of mapping between service
and gemport (Optional)
1.3.6.1.4.1.3902.1082.500.20.2.7.2.1.50-----------Service creating / deleting, 4 is to create, 6 is to
delete
Example:
This operation needs multiple variables to be dispatched at the same time:
1.3.6.1.4.1.3902.1082.500.20.2.7.2.1.2.285278465.4.3.54.54.54:
1-----Blue
parts,
3
means
3
characters, 54 are ASCII characters.
1.3.6.1.4.1.3902.1082.500.20.2.7.2.1.4.285278465.4.3.54.54.54: 4
1.3.6.1.4.13902.1082.500.20.2.7.2.1.50.285278465.4.3.54.54.54: 4
As shown in the following figure, it is the execution effect by using Mib Browser
compiling software:
All rights reserved. No spreading without permission of ZTE.
Page 15
Confidential▲
(5)Configure interface under the remote management
Related OID and index algorithm are shown in the following table:
Function
UNI port's basic VLAN property, consistent with C300
Descripti
on
MIB File
ZTE-AN-GPON-REMOTE-ONU-MIB.mib
MIB
.<IfIndex>.<OnuIndex>.<OnuIfIndex>
Index
IfIndex
Interface Level 1 index
OnuIndex
ONU ID
OnuIfIndex
ONU interface index
Name
zxAnGponRmVlanPortM
OID
.1.3.6.1.4.1.3902.1082.500.20.2.4.63.1.3
ode
Description
Port
VLAN
mode
access ( 1 ), trunk ( 2 ), hybrid ( 3 ), transparent ( 4 ), none
(5)
zxAnGponRmVlanPortDe
.1.3.6.1.4.1.3902.1082.500.20.2.4.63.1.4
PVID
.1.3.6.1.4.1.3902.1082.500.20.2.4.63.1.5
Default CoS
.1.3.6.1.4.1.3902.1082.500.20.2.4.63.1.6
VLAN list
faultVid
zxAnGponRmVlanPortDe
faultCos
zxAnGponRmVlanPortVla
nList
Remark: Description about ONU interface indexes.
All rights reserved. No spreading without permission of ZTE.
Page 16
Confidential▲
| MSB Byte 4
|
Byte 3
|
|
Reserved |
Type
|
Byte 2
| Byte 1 LSB |
|
|
|------------------------+-----------------+-----------------+----------------|
| 0: ETH UNI
| 6: VEIP
|
0
|
0
| Slot No.
|
0
| Port No.
| Index
|
|
|-------------------------------------------------------------------------------|
This index is a 4-byte integer, of them, the highest byte represents ONU
interface type, for example, 0 is Ethernet user port, 6 is VEIP virtual Ethernet
interface.
For example, for eth_0/1, ONU interface index is 0x00000001; for veip_1, ONU
Function
UNI port adds / deleted VLAN, consistent with C300
Descripti
on
MIB File
ZTE-AN-GPON-REMOTE-ONU-MIB.mib
MIB
.<IfIndex>.<OnuIndex>.<OnuIfIndex>
Index
IfIndex
Interface Level 1 index
OnuIndex
ONU ID
OnuIfIndex
ONU interface index
Name
zxAnGponRmVlanPortCmd
OID
Description
.1.3.6.1.4.1.3902.1082.500.20.2.4.64.1.1
Commands:
addVlan (1),
delVlan ( 2 )
zxAnGponRmVlanPortVid
.1.3.6.1.4.1.3902.1082.500.20.2.4.64.1.2
VLAN ID
interface index is 0x06000001, that is 100663297.
This operation is divided into two steps:
1）Configure VLAN mode of VEIP
1.3.6.1.4.1.3902.1082.500.20.2.4.63.1.3--------Index is 3 and index is pon port No., ONU No.,
VEIP interface No., respectively. 1 is access mode, 2 is trunk mode, 3 is hybrid mode, and 4 is
transparent mode.
All rights reserved. No spreading without permission of ZTE.
Page 17
Confidential▲
Example:
Dispatch VEIP mode to configure OID:
1.3.6.1.4.1.3902.1082.500.20.2.4.63.1.3.285278465.4.100663297:2
As shown in the following figure, it is the execution effect by using Mib Browser
compiling software:
2）Configure VEIP interface VLAN tag
1.3.6.1.4.1..3902.1082.500.20.2.4.64.1.1----------VLAN operation type, 1 is to add VLAN, 2 is
to delete VLAN
1.3.6.1.4.1.3902.1082.500.20.2.4.64.1.2----------Configure interface VLAN ID
Example:
This operation needs multiple variables to be dispatched at the same time:
1.3.6.1.4.1.3902.1082.500.20.2.4.64.1.1.285278465.4.100663297: 1
1.3.6.1.4.1.3902.1082.500.20.2.4.64.1.2.285278465.4.100663297: 46
As shown in the following figure, it is the execution effect by using Mib Browser
compiling software:
All rights reserved. No spreading without permission of ZTE.
Page 18
Confidential▲
(6)Configure Service-port
Related OID and index algorithm are shown in the following table:
Function
Configure user port’s basic VLAN and associated QoS policy.
Description
MIB File
ZTE-AN-SERVICE-PORT-MIB.mib
MIB Index
.<IfIndex>.<zxAnSubIfIndex>
IfIndex
Interface Level 1 index
zxAnSubIfInd
Interface Level 2 index
ex
Name
OID
zxAnSrvPortDesc
1.3.6.1.4.1.3902.1082.110.5.2.2.1.1
zxAnSrvPortAdminStatus
1.3.6.1.4.1.3902.1082.110.5.2.2.1.2
zxAnSrvPortServiceMode
1.3.6.1.4.1.3902.1082.110.5.2.2.1.4
Description
untag(1), untagAndEtype(2), cos(3), tag(4), tls(5),
tagAndEtype(6), tagAndCos(7), vlanRange(8),
vlanRangeAndEtype(9), vlanRangeAndCos(10),
batchBindVlan(11), doubleVlan(12)
zxAnSrvPortBrgIfId
1.3.6.1.4.1.3902.1082.110.5.2.2.1.5
zxAnSrvPortUserVid
1.3.6.1.4.1.3902.1082.110.5.2.2.1.8
zxAnSrvPortUserSVid
1.3.6.1.4.1.3902.1082.110.5.2.2.1.9
zxAnSrvPortUserCos
1.3.6.1.4.1.3902.1082.110.5.2.2.1.10
zxAnSrvPortUserStagCos
1.3.6.1.4.1.3902.1082.110.5.2.2.1.11
zxAnSrvPortStartUserVid
1.3.6.1.4.1.3902.1082.110.5.2.2.1.12
zxAnSrvPortEndUserVid
1.3.6.1.4.1.3902.1082.110.5.2.2.1.13
All rights reserved. No spreading without permission of ZTE.
Page 19
Confidential▲
zxAnSrvPortUserEthType
1.3.6.1.4.1.3902.1082.110.5.2.2.1.14
zxAnSrvPortUserDefinedEth
1.3.6.1.4.1.3902.1082.110.5.2.2.1.15
Type
zxAnSrvPortCVid
1.3.6.1.4.1.3902.1082.110.5.2.2.1.18
zxAnSrvPortSVid
1.3.6.1.4.1.3902.1082.110.5.2.2.1.19
zxAnSrvPortCtagCos
1.3.6.1.4.1.3902.1082.110.5.2.2.1.20
zxAnSrvPortStagCos
1.3.6.1.4.1.3902.1082.110.5.2.2.1.21
zxAnSrvPortTlsSVid
1.3.6.1.4.1.3902.1082.110.5.2.2.1.22
zxAnSrvPortIngressTrafficPrf
1.3.6.1.4.1.3902.1082.110.5.2.2.1.27
zxAnSrvPortEgressTrafficPrf
1.3.6.1.4.1.3902.1082.110.5.2.2.1.28
zxAnSrvPortTlsCVid
1.3.6.1.4.1.3902.1082.110.5.2.2.1.33
zxAnSrvPortCosList
1.3.6.1.4.1.3902.1082.110.5.2.2.1.34
zxAnSrvPortCarThresh
1.3.6.1.4.1.3902.1082.110.5.2.2.1.35
zxAnSrvPortRowStatus
1.3.6.1.4.1.3902.1082.110.5.2.2.1.50
Creating /
deleting
operation
The least OIDs needed for dispatching to create a service-port:
1.3.6.1.4.1.3902.1082.110.5.2.2.1.4-----------Configure service-port mode, specific parameter is
untag(1), untagAndEtype(2), cos(3), tag(4), tls(5), tagAndEtype(6), tagAndCos(7), vlanRange(8),
vlanRangeAndEtype(9), vlanRangeAndCos(10), batchBindVlan(11), doubleVlan(12)
1.3.6.1.4.1.3902.1082.110.5.2.2.1.8-----------Configure User-VLAN of the service-port
1.3.6.1.4.1.3902.1082.110.5.2.2.1.18----------Configure CVLAN of the service-port
1.3.6.1.4.1.3902.1082.110.5.2.2.1.5-----------Configure id of the service-port
1.3.6.1.4.1.3902.1082.110.5.2.2.1.19----------Configure SVLAN of the service-port
1.3.6.1.4.1.3902.1082.110.5.2.2.1.50----------Create / delete service-port, 4 is to create, 6 is to
delete
Index algorithm to create a service-port:
Onu+sport type, Level 2 type 3 index:
type(5bits)
11bits
8bits
MBZ(8bits)
3
onu
sport
0
Type 3 represents SPORT type.
00011000000001000000000100000000
From high bit to low bit:
bit31 to bit27 represents type, it is 3,
bit26 to bit16 represents ONU No., fill in ONU No. value,
Bit15 to bit8 represents SPORT No., fill in SPORT No. value,
Bit7 to bit0 represents reserved value, is 0
For example:
1, ONU 100's SPORT 5: 0x18640500;
All rights reserved. No spreading without permission of ZTE.
Page 20
Confidential▲
Example:
This operation needs multiple variables to be dispatched at the same time:
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.110.5.2.2.1.4.285278465.402915584:
4
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.110.5.2.2.1.8.285278465.402915584:
46
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.110.5.2.2.1.18.285278465.402915584:
4045
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.110.5.2.2.1.5.285278465.402915584:
1
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.110.5.2.2.1.19.285278465.402915584:
3901
snmpset -v 2c -c public 10.63.173.243 1.3.6.1.4.1.3902.1082.110.5.2.2.1.50.285278465.402915584:
4
As shown in the following figure, it is the execution effect by using Mib Browser
compiling software:
(7)Configure multicast data
1) Global mvlan configures corresponding OID
Function
Configure mvlan
Description
MIB File
ZTE-AN-IGMP-MIB.mib
All rights reserved. No spreading without permission of ZTE.
Page 21
Confidential▲
MIB Index
.<Mvid>.
Mvid
MVLAN ID
Name
zxAnIgmpMVlanRowStatus
OID
Description
.1.3.6.1.4.1.3902.1082.60.1.2.2.2.1.50
Creating
/
deleting
operation
Configure multicast VLAN OID:
1.3.6.1.4.1.3902.1082.60.1.2.2.2.1.50.4070: 4 --------------4 is to create, 6 is to delete
As shown in the following figure, it is the execution effect by using Mib Browser
compiling software:
2)ONU multicast receiving port configures corresponding OID
ONU multicast port configuration takes VPORT as unit, so it uses Level 2 type 2 index:
Function
Configure receiving port.
Description
MIB File
ZTE-AN-IGMP-MIB.mib
MIB Index
.<Mvid>.<IfIndex>.<zxAnSubIfIndex>
Mvid
MVLAN ID
IfIndex
Interface Level 1 index
zxAnSubIfIn
Interface Level 2 index
dex
Name
OID
Description
zxAnIgmpMgmtMVlanRec
1.3.6.1.4.1.3902.1082.60.1.2.2.3.1.50
Creating / deleting
vIfRowStatus
operation
Onu+vport type, type 2:
All rights reserved. No spreading without permission of ZTE.
Page 22
Confidential▲
type(5bits)
11bits
8bits
MBZ(8bits)
2
onu
vport
0
Type 2 represents VPORT type.
From high bit to low bit:
bit31 to bit27 represents type, it is 2,
bit26 to bit16 represents ONU No., fill in ONU No. value,
Bit15 to bit8 represents VPORT No., fill in VPORT No. value,
Bit7 to bit0 represents reserved value, is 0
For example:
1, ONU 100's VPORT 5: 0x10640500;
Configure multicast receiving port:
1.3.6.1.4.1.3902.1082.60.1.2.2.3.1.50-------Level 3 index is vlanid, pon port index, vport index
Example:
1.3.6.1.4.1.3902.1082.60.1.2.2.3.1.50.4070.285278465.268697856:4
As shown in the following figure, it is the execution effect by using Mib Browser
compiling software:
3)Configure multicast VLAN under the remote management
All rights reserved. No spreading without permission of ZTE.
Page 23
Confidential▲
Function
Descripti
on
Configure downstream multicast VLAN, consistent with C300
MIB File
ZTE-AN-GPON-REMOTE-ONU-MIB.mib
MIB
Index
.<IfIndex>.<OnuIndex>.<Mvid>
IfIndex
Interface Level 1 index
OnuIndex
ONU ID
Mvid
MVLAN ID
Name
zxAnGponRmMVlan
RowStatus
OID
Description
Creating
deleting
operation
.1.3.6.1.4.1.3902.1082.500.20.2.4.30.1.50
/
The following is OID for configuring multicast VLAN under the remote management:
1.3.6.1.4.1.3902.1082.500.20.2.4.30.1.50.285278465.4.4070:4
As shown in the following figure, it is the execution effect by using Mib Browser
compiling software:
4)Configure multicast-related properties
ONU multicast management state, multicast version, fast leave, maximum multicast group and so
on can be configured through following OIDs. And its index:
Onu+vport type, type 2:
type(5bits)
11bits
8bits
MBZ(8bits)
2
onu
vport
0
Type 2 represents VPORT type.
From high bit to low bit:
bit31 to bit27 represents type, it is 2,
bit26 to bit16 represents ONU No., fill in ONU No. value,
Bit15 to bit8 represents VPORT No., fill in VPORT No. value,
Bit7 to bit0 represents reserved value, is 0
For example:
ONU 100's VPORT 5: 0x10640500;
Following are related property OIDs:
1.3.6.1.4.1.3902.1082.60.1.2.1.2.2.1.1.285278465.268697856: 1
1.3.6.1.4.1.3902.1082.60.1.2.1.2.2.1.2.285278465.268632576: 3
All rights reserved. No spreading without permission of ZTE.
Page 24
Confidential▲
1.3.6.1.4.1.3902.1082.60.1.2.1.2.2.1.3.285278465.268697856: 1
1.3.6.1.4.1.3902.1082.60.1.2.1.2.2.1.5.285278465.268632576: 8
As shown in the following figure, it is the execution effect by using Mib Browser
compiling software:
(8)Show OID dispatching configuration results
Configure at the PON side:
Configure under Vport:
All rights reserved. No spreading without permission of ZTE.
Page 25
Confidential▲
2. Dispatching Method via Northbound Interface
When Northbound interface dispatches, EMS must be T125 or newer
versions, and patched correspondingly. Northbound interface dispatching
command is consistent with the original one, but because service models
dispatched via Northbound interface are different according to different areas,
here, just list one one of them. Configuration example:
(1)Add ONU
ADD-ONU::OLTID=198.16.63.26,PONID=1-1-1-1:ECN20160511164434052::AUTHTYPE
=LOID,ONUID=XGPONTEST1,ONUTYPE=4FE2POS4WLAN;
(2)Configure service VLAN
ADD-PONVLAN::OLTID=198.16.63.26,PONID=1-1-1-1,ONUIDTYPE=LOID,ONUID=XGP
ONTEST1:ECN20160511164434052::SVLAN=3901,CVLAN=4045,UV=46;
ADD-PONVLAN::OLTID=198.16.63.26,PONID=1-1-1-1,ONUIDTYPE=LOID,ONUID=XGP
ONTEST1:ECN20160511164434052::SVLAN=3801,CVLAN=2647,UV=2647,SERVICENAME=I
PTV;
CFG-ONUBW::OLTID=198.16.63.26,PONID=1-1-1-1,ONUIDTYPE=LOID,ONUID=XGPON
TEST1:ECN20160511164434052::UPBW=10GPON-BW;
ADD-LANIPTVPORT::OLTID=198.16.63.26,PONID=1-1-1-1,AUTHTYPE=LOID,ONUID=X
GPONTEST1:ECN20160511164434052::MVLAN=4070,SERVICENAME=IPTV;
CFG-LANIPTVPORT::OLTID=198.16.63.26,PONID=1-1-1-1,ONUIDTYPE=LOID,ONUID=X
GPONTEST1:ECN20160511164434052::MAXGRP=8,SERVICENAME=IPTV;
All rights reserved. No spreading without permission of ZTE.
Page 26
Confidential▲
(3)Create bandwidth profile
CFG-ONUBW::OLTID=61.132.211.18,PONID=1-1-4-7,ONUIDTYPE=LOID,ONUID=12312
3123:CTAG::UPBW=FTTHG100MGXU;
//tcont rate-limit
CFG-ONUBW::OLTID=61.132.211.18,PONID=1-1-4-7,ONUIDTYPE=LOID,ONUID=12312
3123:CTAG::BWTYPE=VPORT,DOWNBW=CESHI20M1;
//vport rate-limit
(4)Delete ONU
DEL-ONU::OLTID=61.132.211.18,PONID=1-1-4-7:CTFG::ONUIDTYPE=LOID,ONUID=123
123123;
All rights reserved. No spreading without permission of ZTE.
Page 27