- No category
KSB Pump Characteristic Curves Booklet: Water, Thermal Oil, Hot Water
advertisement
Standardised Water Pump / Thermal Oil and Hot Water Pump 50 Hz Etanorm, Etanorm SYT Etanorm V Etabloc, Etabloc SYT Etanorm-RSY Characteristic Curves Booklet Legal information/Copyright Characteristic Curves Booklet 50 Hz All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for any other purpose, nor otherwise transmitted, published or made available to a third party without the manufacturer's express written consent. Subject to technical modification without prior notice. © KSB SE & Co. KGaA, Frankenthal 17/06/2021 Contents Contents Centrifugal Pumps with Shaft Seal.................................................................................................................. 4 Standardised Water Pump / Thermal Oil and Hot Water Pump.............................................................................................. 4 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY ..................................................................................................................... 4 General ........................................................................................................................................................................... 4 Overview of sizes............................................................................................................................................................ 5 Selection charts .............................................................................................................................................................. 7 Etanorm, n = 2900 rpm ............................................................................................................................................ 7 Etanorm, n = 1450 rpm ............................................................................................................................................ 8 Etanorm, n = 960 rpm .............................................................................................................................................. 9 Etanorm SYT, n = 2900 rpm................................................................................................................................... 10 Etanorm SYT, n = 1450 rpm................................................................................................................................... 11 Etanorm SYT, n = 960 rpm..................................................................................................................................... 12 Etabloc SYT, n = 2900 rpm..................................................................................................................................... 13 Etabloc SYT, n = 1450 rpm..................................................................................................................................... 14 Etanorm V (fixed speed version), n = 2900 rpm ................................................................................................... 15 Etanorm V (fixed speed version), n = 1450 rpm ................................................................................................... 16 Etabloc, n = 2900 rpm (fixed speed version) ........................................................................................................ 17 Etabloc, n = 1450 rpm (fixed speed version) ........................................................................................................ 18 Etabloc, n = 960 rpm (fixed speed version) .......................................................................................................... 19 Etanorm-RSY, n = 1450 rpm .................................................................................................................................. 20 Etanorm-RSY, n = 960 rpm .................................................................................................................................... 21 Characteristic curves..................................................................................................................................................... 22 n = 2900 rpm .......................................................................................................................................................... 22 n = 1450 rpm .......................................................................................................................................................... 56 n = 960 rpm .......................................................................................................................................................... 130 3 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Etanorm Etanorm SYT Etabloc Etabloc SYT Etanorm V Etanorm-RSY Acceptance grade: Characteristic curves to ISO 9906 Class 3B NPSH values The NPSH values indicated in the characteristic curves correspond to a head drop of 3 %. NPSH values in part-load conditions NPSH values for flow rates below Q = 0.3 x QBEP can only be measured with intense technical efforts. Evidence of NPSH values in the part-load range cannot be provided. Density of the fluid handled The indicated heads and performance data apply to pumped fluids with a density ρ = 1.0 kg/dm3 and a kinematic viscosity of up to 20 mm2/s max. If the density ≠ 1.0, the performance data must be multiplied by ρ. For a viscosity > 20 mm2/s the corresponding data for cold water has to be calculated and the impact on the pump's performance has to be determined. Friction loss For some design variants (reinforced bearings, specific shaft seals) friction losses must be considered and indicated as additional power requirement in the data sheet. 4 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Correction factors The characteristic curves apply to pumps with cast iron or bronze impellers. ▪ Etanorm/SYT, Etabloc/SYT When using an impeller made of cast steel materials the efficiency and pump power of the corresponding pump sizes have to be multiplied by the correction factors indicated in the characteristic curves. ▪ Etanorm-RSY When using an impeller made of 1.4408 the efficiency percentages indicated in the characteristic curves have to be reduced by 2 percentage points each. 1311.45/11-EN General Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Overview of sizes Table 1: Overview of sizes Etabloc Etabloc SYT Etanorm-RSY 2900 Etanorm V Speed [rpm] Etanorm SYT Type series Etanorm 1311.45/11-EN Size 040-025-160 040-025-200 050-032-125.1 050-032-160.1 050-032-200.1 050-032-250.1 050-032-125 050-032-160 050-032-200 050-032-250 065-040-125 065-040-160 065-040-200 065-040-250 065-040-315 065-050-125 065-050-160 065-050-200 065-050-250 065-050-315 080-065-125 080-065-160 080-065-200 080-065-250 080-065-315 100-080-160 100-080-200 100-080-250 100-080-315 100-080-400 125-100-160 125-100-200 125-100-250 125-100-315 125-100-400 150-125-200 150-125-250 150-125-315 150-125-400 150-125-510 ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ - ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ - ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ - ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ - - (ð Page 22) (ð Page 23) (ð Page 24) (ð Page 25) (ð Page 26) (ð Page 27) (ð Page 28) (ð Page 29) (ð Page 30) (ð Page 31) (ð Page 32) (ð Page 33) (ð Page 34) (ð Page 35) (ð Page 36) (ð Page 37) (ð Page 38) (ð Page 39) (ð Page 40) (ð Page 41) (ð Page 42) (ð Page 43) (ð Page 44) (ð Page 45) (ð Page 46) (ð Page 47) (ð Page 48) (ð Page 49) (ð Page 50) (ð Page 51) (ð Page 52) (ð Page 53) (ð Page 54) (ð Page 55) - (ð Page 56) (ð Page 57) (ð Page 58) (ð Page 59) (ð Page 60) (ð Page 61) (ð Page 62) (ð Page 63) (ð Page 64) (ð Page 65) (ð Page 66) (ð Page 67) (ð Page 68) (ð Page 69) (ð Page 70) (ð Page 71) (ð Page 72) (ð Page 73) (ð Page 74) (ð Page 75) (ð Page 76) (ð Page 77) (ð Page 78) (ð Page 79) (ð Page 80) (ð Page 81) (ð Page 82) (ð Page 83) (ð Page 84) (ð Page 85) (ð Page 86) (ð Page 87) (ð Page 88) (ð Page 89) (ð Page 90) (ð Page 91) (ð Page 92) (ð Page 93) (ð Page 94) (ð Page 95) (ð Page 130) (ð Page 131) (ð Page 132) (ð Page 133) (ð Page 134) (ð Page 135) (ð Page 136) (ð Page 137) (ð Page 138) (ð Page 139) (ð Page 140) (ð Page 141) (ð Page 142) (ð Page 143) (ð Page 144) (ð Page 145) (ð Page 146) (ð Page 147) (ð Page 148) (ð Page 149) (ð Page 150) (ð Page 151) (ð Page 152) (ð Page 153) (ð Page 154) (ð Page 155) (ð Page 156) (ð Page 157) (ð Page 158) (ð Page 159) (ð Page 160) (ð Page 161) (ð Page 162) (ð Page 163) (ð Page 164) (ð Page 165) (ð Page 166) (ð Page 167) (ð Page 168) (ð Page 169) 200-150-200 200-150-250 200-150-315 200-150-400 200-150-510 200-200-250 ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ - ✘ ✘ ✘ ✘ - ✘ ✘ ✘ ✘ - - - - (ð Page 96) (ð Page 97) (ð Page 98) (ð Page 99) (ð Page 100) (ð Page 101) (ð Page 170) (ð Page 171) (ð Page 172) (ð Page 173) (ð Page 174) (ð Page 175) 250-200-275 250-200-320 250-200-375 250-200-435 250-200-510 ✘ ✘ ✘ ✘ ✘ - - - - - - (ð Page 102) (ð Page 103) (ð Page 104) (ð Page 105) (ð Page 106) (ð Page 176) (ð Page 177) (ð Page 178) (ð Page 179) (ð Page 180) 300-250-295 ✘ - - - - - - (ð Page 107) (ð Page 181) 1450 960 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 5 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etabloc Etabloc SYT Etanorm-RSY 2900 Etanorm V Speed [rpm] Etanorm SYT Type series Etanorm Size 300-250-295.1 300-250-320 300-250-375 300-250-435 300-250-510 ✘ ✘ ✘ ✘ ✘ - - - - - - (ð Page 108) (ð Page 109) (ð Page 110) (ð Page 111) (ð Page 112) (ð Page 182) (ð Page 183) (ð Page 184) (ð Page 185) (ð Page 186) 350-300-350 350-300-350.1 350-300-375 350-300-435 350-300-510 ✘ ✘ ✘ ✘ ✘ - - - - - - (ð Page 113) (ð Page 114) (ð Page 115) (ð Page 116) (ð Page 117) (ð Page 187) (ð Page 188) (ð Page 189) (ð Page 190) (ð Page 191) 1450 960 (ð Page 118) (ð Page 119) (ð Page 120) (ð Page 121) (ð Page 122) (ð Page 123) (ð Page 124) (ð Page 125) (ð Page 126) (ð Page 127) (ð Page 128) (ð Page 129) (ð Page 192) (ð Page 193) (ð Page 196) (ð Page 197) (ð Page 198) (ð Page 199) (ð Page 200) (ð Page 201) (ð Page 202) (ð Page 204) (ð Page 205) (ð Page 206) 1450 960 Table 2: Overview of sizes Etanorm-RSY - - - - - ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ - 1311.45/11-EN Etabloc Etabloc SYT 2900 Etanorm V 125-500.2 150-500.1 200-330 200-400 200-500 250-300 250-330 250-400 250-500 300-360 300-400 300-500 Speed [rpm] Etanorm SYT Type series Etanorm Size 6 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 1311.45/11-EN Selection charts Etanorm, n = 2900 rpm 30 40 20 180 US.gpm 50 30 40 100 IM.gpm 50 200 100 300 200 400 300 500 400 1000 2000 500 1000 3000 2000 500 400 65-50-315 65-40-315 100 80-65-315 125-100-315 100-80-315 300 65-50-250 50-32-250 50-32-250.1 100-80-250 80-65-250 65-40-250 125-100-250 200 65-50-200 50 80-65-200 50-32-200 40-25-200 150-125-200 100-80-200 65-50-160 30 50-32-160 50-32-160.1 40-25-160 100 65-40-160 125-100-160 80-65-160 ft 100-80-160 20 50-32-125 65-40-125 80-65-125 H [m] 50 65-50-125 40 10 30 8 5 Q[m³/h] 2 10 20 3 4 5 30 l/s 40 10 50 100 20 30 200 40 50 300 400 100 500 700 7 Centrifugal Pumps with Shaft Seal 50-32-125.1 Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 40 125-100-200 65-40-200 50-32-200.1 8 Etanorm, n = 1450 rpm US.gpm 4 5 10 IM.gpm 20 30 10 20 40 30 50 40 100 50 200 100 300 200 400 500 300 1000 400 500 2000 1000 3000 40005000 2000 3000 40005000 300 200-150-510 150-125-510 50 100-80-400 350-300-510 200 250-200-435 150-125-400 40 300-250-510 250-200-510 300-250-435 125-100-400 200-150-400 350-300-435 100 250-200-375 30 150-125-315 65-40-315 65-50-315 80-65-315 100-80-315 125-100-315 300-250-375 350-300-375 200-150-315 250-200-320 20 80-65-250 300-250-320 100-80-250 65-50-250 50-32-250 350-300-350 65-40-250 50 125-100-250 150-125-250 200-150-250 10 40-25-200 65-40-200 50-32-200 65-50-200 80-65-200 100-80-200 350-300-350.1 250-200-275 40 300-250-295 30 300-250-295.1 125-100-200 150-125-200 65-50-160 50-32-160 65-40-160 200-200-250 80-65-160 20 200-150-200 5 100-80-160 125-100-160 40-25-160 4 50-32-125 3 65-50-125 65-40-125 80-65-125 10 ft 2 H [m] 5 4 1 1 0.3 Q[m³/h] 0.4 0.5 2 3 l/s 1311.45/11-EN 4 1 5 10 2 3 20 4 5 30 40 10 50 100 20 30 200 40 50 300 400 500 100 1000 200 300 2000 400 500 Centrifugal Pumps with Shaft Seal 50-32-125.1 Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 100 5 1311.45/11-EN Etanorm, n = 960 rpm 50 5 US.gpm 4 5 10 20 IM.gpm 30 10 40 20 30 50 40 100 50 200 100 300 200 400 500 300 1000 400 500 2000 1000 3000 4000 5000 2000 3000 4000 5000 40 200-150-510 150-125-510 30 250-200-435 150-125-400 20 100 250-200-510 300-250-510 350-300-510 300-250-435 100-80-400 125-100-400 200-150-400 350-300-435 50 250-200-375 40 300-250-375 65-40-315 150-125-315 65-50-315 80-65-315 10 65-50-250 50-32-250 100-80-315 100-80-250 80-65-250 65-40-250 125-100-315 350-300-375 200-150-315 250-200-320 150-125-250 125-100-250 350-300-350 20 200-150-250 5 65-50-200 300-250-295 300-250-295.1 125-100-200 150-125-200 50-32-160 200-200-250 65-50-160 65-40-160 100-80-160 H [m] 10 200-150-200 80-65-160 40-25-160 2 350-300-350.1 ft 125-100-160 5 50-32-125 80-65-125 65-40-125 65-50-125 50-32-125.1 4 1 3 2 0.6 1 0.3 Q[m³/h] 0.4 0.5 2 3 l/s 4 1 5 10 2 3 20 4 5 30 40 10 50 100 20 30 200 40 50 300 400 500 100 1000 200 300 1600 400 9 Centrifugal Pumps with Shaft Seal Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 100-80-200 80-65-200 4 3 250-200-275 Standardised Water Pump / Thermal Oil and Hot Water Pump 65-40-200 50-32-200 40-25-200 30 300-250-320 10 Etanorm SYT, n = 2900 rpm 20 120 50 40 30 40 50 200 100 US.gpm IM.gpm 100 300 200 400 300 500 400 1000 500 2000 3000 2000 1000 100 300 5 0 -3 2 -2 5 0 6 5 -4 0 -2 5 0 6 5 -5 0 -2 5 0 8 0 -6 5 -2 5 0 1 0 0 -8 0 -2 5 0 1 2 5 -1 0 0 -2 5 0 200 6 5 -5 0 -2 0 0 50 5 0 -3 2 -2 0 0 4 0 -2 5 -2 0 0 8 0 -6 5 -2 0 0 1 0 0 -8 0 -2 0 0 65-40-200 40 1 2 5 -1 0 0 -2 0 0 50-32-200.1 1 5 0 -1 2 5 -2 0 0 100 30 6 5 -5 0 -1 6 0 5 0 -3 2 -1 6 0 6 5 -4 0 -1 6 0 50-32-160.1 4 0 -2 5 -1 6 0 1 2 5 -1 0 0 -1 6 0 80-65-160 1 0 0 -8 0 -1 6 0 ft 50-32-125.1 50 H [m] 40 10 9 5 Q [m³/h] 2 10 20 3 1311.45/11-EN 4 5 30 l/s 40 10 100 50 20 30 200 40 50 300 400 100 500 30 700 Centrifugal Pumps with Shaft Seal 20 Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 30 1311.45/11-EN Etanorm SYT, n = 1450 rpm 20 10 70 30 20 IM.gpm 40 30 50 100 US.gpm 40 50 200 100 300 400 500 300 200 1000 400 500 2000 3000 2000 1000 200 50 150-125-400 40 200-150-400 30 20 100 1 2 5 -1 0 0 -3 1 5 6 5 -4 0 -3 1 5 65-50-315 8 0 -6 5 -3 1 5 1 5 0 -1 2 5 -3 1 5 1 0 0 -8 0 -3 1 5 2 0 0 -1 5 0 -3 1 5 5 0 -3 2 -2 5 0 6 5 -4 0 -2 5 0 6 5 -5 0 -2 5 0 8 0 -6 5 -2 5 0 100-80-250 50 1 2 5 -1 0 0 -2 5 0 1 5 0 -1 2 5 -2 5 0 50-32-200.1 10 H [m] 8 0 -6 5 -2 0 0 1 0 0 -8 0 -2 0 0 50-32-200 65-40-200 50-32-160.1 30 8 0 -6 5 -1 6 0 1 0 0 -8 0 -1 6 0 20 1 2 5 -1 0 0 -1 6 0 ft 50-32-125.1 4 10 3 2 2.5 3 4 1 5 Q [m³/h] l/s 2 10 20 3 4 5 30 40 10 50 100 20 30 200 40 50 300 400 500 100 700 11 Centrifugal Pumps with Shaft Seal 4 0 -2 5 -1 6 0 1 2 5 -1 0 0 -2 0 0 1 5 0 -1 2 5 - 2 0 0 6 5 -5 0 -1 6 0 50-32-160 6 5 -4 0 -1 6 0 5 40 Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 6 5 -5 0 -2 0 0 4 0 -2 5 -2 0 0 12 Etanorm SYT, n = 960 rpm 10 30 20 US.gpm 30 20 IM.gpm 40 30 50 40 100 50 200 100 300 400 500 200 300 1000 400 500 1000 1 5 0 -1 2 5 -4 0 0 20 200-150-400 50 6 5 -4 0 -3 1 5 1 5 0 -1 2 5 - 3 1 5 1 0 0 -8 0 -3 1 5 6 5 -5 0 -3 1 5 8 0 -6 5 -3 1 5 40 1 2 5 -1 0 0 -3 1 5 10 2 0 0 -1 5 0 -3 1 5 5 0 -3 2 -2 5 0 6 5 -5 0 -2 5 0 6 5 -4 0 -2 5 0 8 0 -6 5 -2 5 0 30 1 0 0 -8 0 -2 5 0 1 2 5 -1 0 0 -2 5 0 1 5 0 -1 2 5 -2 5 0 20 6 5 -5 0 -2 0 0 5 4 0 -2 5 -2 0 0 50-32-200.1 50-32-200 8 0 -6 5 -2 0 0 65-40-200 1 0 0 -8 0 -2 0 0 1 2 5 -1 0 0 -2 0 0 1 5 0 -1 2 5 -2 0 0 4 3 6 5 -5 0 -1 6 0 50-32-160 8 0 -6 5 -1 6 0 6 5 -4 0 -1 6 0 4 0 -2 5 -1 6 0 10 1 2 5 -1 0 0 -1 6 0 1 0 0 -8 0 -1 6 0 ft 2 50-32-125.1 5 H [m] 4 1 1.6 3 2 0.5 l/s 1311.45/11-EN 4 1 5 Q [m³/h] 2 10 20 3 4 5 30 40 10 50 100 20 30 200 40 50 300 400 100 Centrifugal Pumps with Shaft Seal 50-32-160.1 Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 10 1311.45/11-EN Etabloc SYT, n = 2900 rpm 10 10 70 30 20 US.gpm 20 IM.gpm 100 50 40 30 40 200 300 100 50 400 300 200 500 400 1000 1000 500 200 65-50-200 50 40-25-200 80-65-200 50-32-200 50-32-200.1 40 65-40-200 30 50-32-160 50-32-160.1 100-80-160 ft 20 50 H [m] 40 10 9 2 4 3 1 5 Q [m³/h] l/s 2 20 10 3 4 5 30 40 10 50 200 100 20 30 40 50 30 290 13 Centrifugal Pumps with Shaft Seal 50-32-125.1 Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 65-40-160 40-25-160 100 65-50-160 80-65-160 14 Etabloc SYT, n = 1450 rpm 5 4 4 5 20 30 20 10 IM.gpm 40 100 50 30 40 50 300 200 100 200 400 300 500 400 500 50 65-50-200 40-25-200 40 80-65-200 50-32-200.1 50-32-200 65-40-200 10 30 65-50-160 H [m] 50-32-160.1 40-25-160 65-40-160 50-32-160 80-65-160 20 100-80-160 5 ft 10 3 2 0.7 0.2 1 2 Q [m³/h] 0.3 0.4 1311.45/11-EN 0.5 3 l/s 4 1 10 5 2 20 3 4 5 30 40 10 50 100 20 30 160 40 Centrifugal Pumps with Shaft Seal 50-32-125.1 4 Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 3 20 10 US.gpm 1311.45/11-EN Etanorm V (fixed speed version), n = 2900 rpm US.gpm 50 40 110 100 200 IM.gpm 50 300 100 200 400 500 300 400 1000 500 2000 1000 2000 100 300 80-65-250 50-32-250 50-32-250.1 100-80-250 65-50-250 65-40-250 125-100-250 50 200 80-65-200 50-32-200 100-80-200 65-50-200 50-32-200.1 40 125-100-200 150-125-200 65-40-200 30 100 65-50-160 50-32-160 65-40-160 80-65-160 125-100-160 ft 20 50-32-125 65-40-125 50 50-32-125.1 65-50-125 80-65-125 40 30 H [m] 20 5 10 Q[m³/h] 3 4 20 5 30 l/s 40 10 50 100 20 200 30 40 50 300 400 100 500 630 15 Centrifugal Pumps with Shaft Seal 10 Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 100-80-160 50-32-160.1 16 Etanorm V (fixed speed version), n = 1450 rpm 40 30 70 US.gpm 50 40 100 IM.gpm 50 200 300 100 400 200 300 500 1000 400 500 2000 1000 2000 200 50 150-125-400 40 200-150-400 100-80-400 125-100-400 100 30 65-50-315 100-80-315 80-65-315 150-125-315 200-150-315 125-100-315 65-40-315 20 65-40-250 50-32-250 65-50-250 80-65-250 100-80-250 125-100-250 50-32-250.1 200-150-250 80-65-200 50-32-200.1 10 50-32-200 65-50-200 65-40-200 150-125-200 30 200-150-200 65-50-160 65-40-160 50-32-160 40 100-80-200 125-100-200 H [m] 50-32-160.1 50 150-125-250 80-65-160 125-100-160 20 100-80-160 5 65-40-125 50-32-125 4 65-50-125 80-65-125 10 3 ft 2 5 1.4 6 10 2 Q[m³/h] 3 1311.45/11-EN 4 20 5 30 l/s 40 10 50 100 20 30 200 40 50 300 400 100 500 620 Centrifugal Pumps with Shaft Seal 50-32-125.1 Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 30 1311.45/11-EN Etabloc, n = 2900 rpm (fixed speed version) 30 40 20 120 US.gpm 50 30 40 100 IM.gpm 50 200 300 100 400 200 500 300 400 1000 500 1000 100 300 50-32-250 80-65-250 65-50-250 100-80-250 65-40-250 50-32-250.1 200 65-50-200 50 80-65-200 125-100-200 50-32-200 40-25-200 100-80-200 50-32-200.1 40 65-40-200 100 30 50-32-160 40-25-160 125-100-160 65-50-160 65-40-160 ft 100-80-160 20 65-40-125 50-32-125 80-65-125 50-32-125.1 H [m] 50 65-50-125 Pmax <= 55kW 10 100-80-250 125-100-200 30 8 5 Q[m³/h] 2 10 20 3 4 5 30 l/s 40 10 Etabloc 50-315, 65-315, 80-250 and 80-315 not for location: India 50 100 20 30 200 40 50 300 400 100 17 Centrifugal Pumps with Shaft Seal 40 Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 80-65-160 50-32-160.1 18 Etabloc, n = 1450 rpm (fixed speed version) 70 30 IM.gpm 10 40 20 50 30 40 US.gpm 100 50 200 300 100 200 400 300 500 1000 400 500 2000 1000 3000 2000 200 50 150-125-400 40 100-80-400 200-150-400 125-100-400 100 30 65-50-315 80-65-315 150-125-315 125-100-315 65-40-315 200-150-315 20 50-32-250 65-40-250 80-65-250 65-50-250 100-80-250 125-100-250 50-32-250.1 200-150-250 80-65-200 50-32-200.1 10 50-32-200 50 150-125-250 40 100-80-200 65-50-200 65-40-200 30 125-100-200 150-125-200 H [m] 65-50-160 50-32-160 50-32-160.1 125-100-160 80-65-160 200-150-200 20 100-80-160 5 50-32-125.1 4 50-32-125 ft 80-65-125 65-40-125 10 3 2 2.5 3 4 1 5 Q[m³/h] l/s 2 10 20 3 4 5 30 40 10 Etabloc 80-400, 100-400, 125-315 and 125-400 not for location: India 1311.45/11-EN 50 100 20 30 200 40 50 300 400 100 500 700 Centrifugal Pumps with Shaft Seal 65-50-125 Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 20 1311.45/11-EN Etabloc, n = 960 rpm (fixed speed version) US.gpm 10 20 20 30 IM.gpm 10 20 40 50 30 40 100 50 200 100 300 200 400 300 500 1000 400 500 1000 50 40 65-50-315 65-40-315 10 125-100-315 80-65-315 30 65-50-250 50-32-250 80-65-250 65-40-250 100-80-250 125-100-250 50-32-250.1 150-125-250 20 200-150-250 5 4 100-80-200 65-50-200 50-32-200 65-40-200 50-32-200.1 125-100-200 80-65-200 200-150-200 65-50-160 50-32-160 3 50-32-160.1 80-65-160 100-80-160 10 125-100-160 ft 50-32-125 2 50-32-125.1 65-40-125 80-65-125 5 65-50-125 4 1 1.5 2 0.5 3 l/s 4 1 5 Q[m³/h] 2 10 20 3 4 5 30 40 10 50 100 20 30 200 40 50 300 400 100 19 Centrifugal Pumps with Shaft Seal H [m] Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 150-125-200 20 Etanorm-RSY, n = 1450 rpm 200 100 400 US.gpm 500 300 400 500 1000 IM.gpm 2000 1000 3000 2000 4000 5000 3000 4000 5000 300 200-500 150-500.1 300-500 200 250-500 50 125-500.2 40 300-400 200-400 30 100 250-400 200-330 20 250-330 300-360 50 40 10 30 250-300 20 5 ft 4 10 3 50 Q[m³/h] 20 1311.45/11-EN 100 200 30 40 50 300 l/s 400 100 500 1000 200 300 2000 400 500 Centrifugal Pumps with Shaft Seal H [m] Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 300 1311.45/11-EN Etanorm-RSY, n = 960 rpm 300 200 50 400 US.gpm 500 300 400 1000 IM.gpm 500 2000 3000 1000 2000 4000 3000 5000 4000 5000 40 100 30 200-500 150-500.1 20 250-500 300-500 125-500.2 300-400 50 200-400 250-400 40 10 30 200-330 250-330 300-360 5 4 250-300 10 3 H [m] 5 4 1 50 Q[m³/h] 20 100 200 30 40 50 300 l/s 400 100 500 1000 200 300 2000 400 500 21 Centrifugal Pumps with Shaft Seal ft 2 Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 20 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Characteristic curves n = 2900 rpm Etanorm 040-025-160, n = 2900 rpm Etanorm SYT, Etabloc, Etabloc SYT 0 10 0 10 Qmin 15 40 20 Q [US.gpm] 30 20 Q [IM.gpm] 20 25 30 30 35 15 20 η [%] 25 36.0 30 15 20 35 33.9 25 30 40 100 30 15 20 32.0 25 30 30 30 30.4 30 30 15 20 ø169 ø165 H [ft] 25 20 ø155 27.6 ø145 H [m] 50 25 ø135 10 0 0.0 2 Q [m³/h] Q [l/s] 0.5 4 1.0 6 8 1.5 2.0 2.5 18 ø169 50 10 NPSH [ft] R NPSH [m] R ø135 0 0 2.2 2.0 ø169 ø165 1.5 2 ø155 P [hp] ø145 ø135 P [kW] 1 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,970 P: 1,031 0.5 0.3 0 2 Q [m³/h] 4 6 8 K1311.452/14/2 22 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 1311.45/11-EN 1.0 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 040-025-200, n = 2900 rpm Etanorm SYT, Etabloc, Etabloc SYT 0 10 0 10 Qmin 15 20 30 40 20 Q [IM.gpm] 66 60 20 Q [US.gpm] 30 200 25 30 15 40 20 η [%] 25 15 20 H [ft] 33.0 30 50 25 ø209 32.2 30 15 20 15 20 40 150 31.1 ø205 25 29.5 ø195 25 30 28.2 100 ø180 H [m] ø165 20 0 2 Q [m³/h] 0 4 6 8 Q [l/s] 1 10 2 3 35 ø209 10 NPSH [ft] NPSH [m] R ø165 R 20 5 5 1 4 ø209 ø205 3 4 ø195 P [hp] ø180 2 ø165 P [kW] 2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,920 P: 1,087 1 0 2 Q [m³/h] 4 6 8 10 1311.45/11-EN K1311/452/15/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 23 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-125.1, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 20 Q [US.gpm] 40 0 20 Qmin 25 60 40 Q [IM.gpm] 40 50 40 80 60 80 55 80 60 50 η [%] 55 60 20 100 63.5 63.5 40 50 55 60 60 H [m] 40 59.7 50 15 60 H [ft] 55 59.2 40 50 ø139 ø134 55 40 55 ø124 55 59.6 10 ø114 55 ø104 20 0 5 0 Q [m³/h] 2 10 Q [l/s] 15 20 4 25 6 ø139 20 5 NPSH [m] ø104 R NPSH [ft] ø114 R 0 0 2.0 ø139 ø134 1.5 2 P [kW] ø124 P [hp] 1.0 ø114 1 ø104 0.5 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,982 P: 1,018 0 5 Q [m³/h] 10 15 20 25 1311.45/11-EN K1311.452/17/2 24 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-160.1, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 40 20 Q [US.gpm] 0 20 Qmin 40 60 40 Q [IM.gpm] 30 40 80 45 100 60 80 50 η [%] H [m] 30 40 45 30 54.9 100 30 47.8 40 41.7 50 30 H [ft] 45 40 ø170 38.9 20 ø162 ø150 50 ø135 0 5 0 Q [m³/h] 2 10 Q [l/s] 15 20 4 25 6 ø170 40 10 NPSH [ft] R NPSH 20 ø135 [m] R 0 0 3 4 ø170 ø162 P [kW] ø150 P [hp] 2 ø135 2 1 0 5 Q [m³/h] 10 15 20 25 1311.45/11-EN K1311.452/18/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 25 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-200.1, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 60 20 Q [US.gpm] 40 0 20 60 40 Q [IM.gpm] Qmin 35 80 40 60 80 45 50 35 40 50 100 η [%] 52.5 45 50 53.2 52.5 H [m] 35 40 150 52.5 53.3 45 ø204 40 50 52.5 51.0 35 40 45 H [ft] ø193 50 50.0 100 30 ø180 ø168 0 9 NPSH 5 0 Q [m³/h] 2 10 Q [l/s] 15 20 25 4 6 ø168 ø204 [m] R 20 5 NPSH [ft] R 5 1 6 8 ø204 P [kW] ø193 6 4 P [hp] ø180 4 ø168 2 2 0 5 Q [m³/h] 10 15 20 25 1311.45/11-EN K1311.452/19/3 26 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-250.1, n = 2900 rpm Etanorm V, Etabloc 0 20 40 Q [US.gpm] 0 20 60 40 Q [IM.gpm] 95 Qmin 80 100 60 80 300 25 30 25 35 38 30 η [%] 35 80 38 25 39.1 35 25 38 30 25 38 37.8 35 60 H [ft] 40.1 30 200 30 ø254 37.3 35 25 30 H [m] ø246 36.8 35 ø232 35 36.4 35 35 40 ø220 ø210 ø200 100 30 0 5 0 Q [m³/h] 2 10 Q [l/s] 15 20 4 25 6 12 ø254 35 10 NPSH [ft] R NPSH [m] R ø200 20 5 10 3 11.5 15 ø254 10 ø246 8 P [hp] ø232 10 ø220 6 ø210 ø200 4 5 P [kW] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,946 P: 1,057 2 0 5 Q [m³/h] 10 15 20 25 1311.45/11-EN K1311.452/20/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 27 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-125, n = 2900 rpm Etanorm V, Etabloc 0 50 0 20 Q [IM.gpm] 40 Qmin 100 Q [US.gpm] 60 50 55 60 150 80 100 120 65 η [%] 25 50 80 70 55 60 70.2 65 70 H [ft] 68.0 20 50 55 60 ø139 65 H [m] 60 67.0 50 15 50 55 ø130 60 55 64.3 60 ø120 40 61.2 ø110 10 ø104 0 0 5 Q [m³/h] 10 2 Q [l/s] 15 20 4 25 6 30 35 8 10 ø139 8 ø104 2 NPSH [ft] R NPSH [m] R 0 0 3 4 ø139 P [hp] ø130 2 ø120 P [kW] 2 ø110 1 ø104 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,993 P: 1,007 0 0 5 Q [m³/h] 10 15 20 25 30 0 35 1311.45/11-EN K1311.452/21/2 28 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-160, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 50 0 50 Qmin 40 40 50 100 Q [US.gpm] 150 100 Q [IM.gpm] 55 58 62 η [%] 65 H [m] 40 50 55 58 66.5 62 65 30 40 50 40 55 50 40 55 100 63.9 58 ø174 62.0 ø162 58 H [ft] 61.0 50 55 20 58 ø150 58 60.1 ø141 58 50 ø132 0 20 0 5 Q [m³/h] 10 2 Q [l/s] 15 20 4 25 6 30 35 8 40 10 ø174 NPSH 50 [m] R ø132 10 NPSH [ft] R 0 0 6 ø174 4 ø162 P [kW] ø150 4 ø141 2 P [hp] ø132 2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,985 P: 1,015 0 0 5 Q [m³/h] 10 15 20 25 30 35 0 40 1311.45/11-EN K1311.452/22/3 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 29 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-200, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 50 0 50 Qmin 35 35 35 50 150 100 Q [IM.gpm] 64 60 100 Q [US.gpm] 40 40 45 45 40 45 200 50 55 50 η [%] 58.3 57.8 55 H [ft] 50 55 55 55.5 ø209 ø206 55 35 40 45 35 40 45 40 150 50 53.4 ø193 50 H [m] 50.9 50 50 30 100 ø180 ø170 22 0 5 0 Q [m³/h] 10 2 Q [l/s] 15 20 4 25 30 6 35 8 10 ø209 4 14 NPSH [ft] R ø180 NPSH [m] 10 ø170 R 2 4 1 9 ø209 ø206 8 10 ø193 6 P [hp] ø180 4 ø170 5 P [kW] 2 0.5 0 5 Q [m³/h] 10 15 20 25 30 35 1311.45/11-EN K1311.452/23/1 30 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-250, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc 0 100 50 0 100 Q [US.gpm] 50 Qmin 150 100 Q [IM.gpm] 35 150 40 45 300 η [%] 35 49.6 40 45 80 35 H [ft] 48.0 40 45 45 H [m] 35 46.0 40 45 60 45.4 35 45 ø261 45 200 45 40 ø246 44.7 40 ø232 ø220 40 ø205 0 0 5 Q [m³/h] 10 2 Q [l/s] 15 20 4 30 6 20 NPSH 25 35 8 40 10 ø261 ø205 50 [m] R 10 NPSH [ft] R 0 0 ø261 15 20 ø246 P [kW] P [hp] ø232 10 ø220 10 ø205 5 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,925 P: 1,081 0 5 Q [m³/h] 10 15 20 25 30 35 40 1311.45/11-EN K1311.452/24/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 31 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-040-125, n = 2900 rpm Etanorm V, Etabloc 0 100 0 50 Q [IM.gpm] 28 Qmin 50 60 65 200 Q [US.gpm] 100 150 200 70 25 75 50 η [%] 80 79.4 60 65 70 H [ft] 75 20 50 75 77.9 60 65 70 75 15 50 50 H [m] 60 ø139 75 76.2 60 65 60 ø130 75 70 65 72.2 40 ø120 68.8 10 ø110 ø104 7 0 10 Q [m³/h] 0 20 30 Q [l/s] 5 40 50 10 60 15 3.5 ø139 10 ø104 2 NPSH [ft] R NPSH [m] R 0 0 4 ø139 3 4 ø130 ø120 P [hp] 2 ø110 P [kW] 2 ø104 1 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,946 P: 1,058 0.2 0 10 Q [m³/h] 20 30 40 50 60 1311.45/11-EN K1311.452/25/1 32 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-040-160, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 100 0 100 Qmin 58 200 Q [US.gpm] 300 200 Q [IM.gpm] 150 68 73.5 η [%] 40 75.5 58 H [m] H [ft] 68 73.5 73.5 75.1 58 30 100 68 ø174 73.5 73.5 74.2 ø160 73.5 58 68 20 ø147 71.8 50 ø128 0 0 10 Q [m³/h] 20 5 30 Q [l/s] 40 50 10 60 70 15 20 20 6 NPSH [m] R 4 NPSH [ft] R 2 5 8 ø174 10 ø160 6 P [hp] ø147 4 5 ø128 P [kW] 2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,955 P: 1,047 0 0 10 Q [m³/h] 20 30 40 50 60 0 70 1311.45/11-EN K1311.452/26/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 33 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-040-200, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 100 0 50 Qmin 60 50 40 55 50 40 50 40 50 40 40 100 Q [IM.gpm] 40 50 200 Q [US.gpm] 300 150 60 200 200 65 68.8 55 60 55 60 η [%] 65 66.8 65 65 55 60 65 65.4 H [ft] 65 60 60 63.7 55 60 60 61.7 40 50 250 ø209 55 55 58.7 H [m] 55 60 60 55 55 50 ø199 50 55 50 50 100 ø192 ø184 20 40 ø175 ø160 10 0 10 Q [m³/h] 0 20 30 Q [l/s] 5 40 50 10 60 70 15 14 4 NPSH [ft] R 10 NPSH [m] R 2 4 1 13 ø209 15 ø199 10 P [hp] ø192 P [kW] 10 ø184 ø175 ø160 5 5 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,960 P: 1,042 1 0 10 Q [m³/h] 20 30 40 50 60 70 1311.45/11-EN K1311.452/27/1 34 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-040-250, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc 0 0 100 100 50 100 Q [IM.gpm] Qmin 200 Q [US.gpm] 40 150 50 40 300 200 250 56 50 300 η [%] 56 60.4 80 40 60.1 50 H [ft] 56 56 40 59.4 50 56 56 60 40 H [m] 50 ø260 ø252 56 58.3 56 55.2 50 50 40 200 ø235 50 100 ø218 40 20 ø195 0 0 10 Q [m³/h] 20 5 30 Q [l/s] 40 50 10 60 70 15 20 14 4 NPSH [ft] R NPSH 10 [m] R 2 4 ø260 20 30 ø252 ø235 P [kW] 20 ø218 P [hp] 10 ø195 10 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,988 P: 1,012 0 0 0 10 Q [m³/h] 20 30 40 50 60 70 1311.45/11-EN K1311.452/28/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 35 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-040-315, n = 2900 rpm Etabloc 0 100 0 160 50 100 Q [IM.gpm] Qmin 200 Q [US.gpm] 30 35 30 35 150 200 40 45 η [%] 40 140 47.1 30 45 35 45.4 40 120 45 400 45 42.2 30 35 ø326 100 40 ø318 38.3 H [m] H [ft] 30 ø300 80 34.8 35 ø280 200 60 ø260 0 18 10 Q [m³/h] 0 20 30 Q [l/s] 5 40 50 10 60 15 ø326 NPSH [m] 3% 40 10 NPSH [ft] 3% ø260 20 4 40 ø326 ø318 30 ø300 40 P [kW] ø280 P [hp] 20 ø260 20 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,942 P: 1,061 10 0 10 Q [m³/h] 20 30 40 50 60 1311.45/11-EN K1311.452/29/3 36 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-050-125, n = 2900 rpm Etanorm V, Etabloc 0 100 0 200 Q [US.gpm] 100 Q [IM.gpm] 28 Qmin 300 400 200 500 300 400 60 25 70 80 η [%] 75 80 60 70 20 82.0 75 60 60 80 70 75 79.9 75 60 15 H [ft] 70 H [m] ø142 70 75 74.8 70 40 ø130 70 10 70 75 78.0 ø120 ø112 20 6 0 20 Q [m³/h] 0 40 60 Q [l/s] 10 80 100 20 120 30 7.5 ø142 20 6 ø112 4 NPSH [ft] R NPSH [m] R 2 5 1 6 8 ø142 ø130 6 4 P [hp] ø120 P [kW] 4 ø112 2 2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,992 P: 1,008 0.5 0 20 Q [m³/h] 40 60 80 100 120 1311.45/11-EN K1311.452/30/1 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 37 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-050-160, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 100 0 200 Q [US.gpm] 100 300 200 Q [IM.gpm] 46 400 500 300 400 150 Qmin 60 70 75 40 η [%] 80 60 H [ft] 70 81.3 75 80 60 70 30 80 80.6 75 100 80 ø174 79.8 60 H [m] 70 60 75 ø162 70 20 78.6 75 ø150 74.9 75 70 50 ø135 ø128 12 0 20 Q [m³/h] 0 40 60 Q [l/s] 10 80 100 20 120 30 6 ø174 NPSH [ft] ø128 4 18 R 10 NPSH [m] R 2 2 0.5 13 ø174 10 ø162 10 ø150 ø135 5 ø128 P [hp] P [kW] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,975 P: 1,026 0 0 0 20 Q [m³/h] 40 60 80 100 120 1311.45/11-EN K1311.452/31/1 38 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-050-200, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 100 Q [US.gpm] 200 0 100 Q [IM.gpm] 50 Qmin 60 300 400 200 500 300 400 70 η [%] 50 60 76.6 60 200 70 50 74.7 60 70 H [m] 40 50 60 50 60 70 73.1 70 70 H [ft] 70 70.7 ø219 60 70 67.3 60 ø206 100 60 60 ø193 50 20 ø180 ø170 0 20 0 Q [m³/h] 40 60 Q [l/s] 10 80 100 20 120 30 20 5 NPSH NPSH [ft] [m] R R 0 0 30 ø219 20 ø206 P [kW] 20 ø193 P [hp] ø180 10 ø170 10 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,980 P: 1,021 0 0 20 Q [m³/h] 40 60 80 100 0 120 1311.45/11-EN K1311.452/32/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 39 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-050-250, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc 0 100 100 Q [US.gpm] 0 100 Qmin 200 Q [IM.gpm] 50 60 300 400 200 500 300 400 65 300 η [%] 50 70 60 70.4 65 80 70 H [ft] 50 60 H [m] 69.0 65 ø260 67.3 50 60 60 200 ø246 65 64.7 ø232 ø215 40 0 20 Q [m³/h] 0 40 60 Q [l/s] 10 80 100 20 120 30 ø215 ø260 35 10 NPSH [ft] NPSH R [m] R 20 5 5 30 40 ø260 P [kW] ø246 P [hp] 20 ø232 ø215 20 10 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,970 P: 1,031 0 20 Q [m³/h] 40 60 80 100 120 1311.45/11-EN K1311.452/33/2 40 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-050-315, n = 2900 rpm Etabloc 0 200 0 100 155 200 Q [IM.gpm] Qmin 50 400 Q [US.gpm] 55 600 300 400 500 500 60 65 η [%] 140 50 55 H [ft] 68.4 60 400 65 120 50 65 65.8 55 60 65 ø323 64.5 100 50 55 60 H [m] 300 ø303 61.3 60 ø285 60 80 ø265 65 0 20 0 Q [m³/h] 40 60 Q [l/s] 10 80 100 20 120 140 30 40 16 50 ø323 10 NPSH [ft] R NPSH [m] ø323 R 0 0 70 90 ø323 60 P [hp] ø303 ø285 40 50 ø265 P [kW] 20 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,935 P: 1,070 5 0 20 Q [m³/h] 40 60 80 100 120 10 140 1311.45/11-EN K1311.452/34/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 41 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 080-065-125, n = 2900 rpm Etanorm V, Etabloc 0 200 0 200 Qmin 25 400 Q [US.gpm] 50 600 400 Q [IM.gpm] 60 70 75 80 600 80 η [%] 83.4 20 50 60 70 75 80 50 15 50 50 H [m] 60 80 60 70 60 77.4 75 70 70 70 60 0 10 60 80 70 75.4 75 Ø141 - Ø130: Form/Type A01 Ø129 - Ø113: Form/Type A05 Ø112 - Ø109: Form/Type A06 Q [l/s] 100 20 ø141/A01 40 75 75 71.8 20 Q [m³/h] 40 H [ft] 75 10 0 75 70 70 5 60 80 80.3 ø130/A01 ø126/120/12°/A05 ø125/114/22°/A05 ø123/109/100/28°/A06 120 30 140 20 160 40 18 ø141/A01 NPSH NPSH [ft] ø123/109/100/28°/A06 4 R 10 [m] R 2 ø141/A01 8 10 ø130/A01 6 P [hp] P [kW] ø126/120/12°/A05 4 5 ø125/114/22°/A05 ø123/109/100/28°/A06 2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,974 P: 1,026 0 20 Q [m³/h] 40 60 80 100 120 140 160 1311.45/11-EN K1311.452/35/3 42 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 080-065-160, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 200 0 200 50 60 600 400 Q [IM.gpm] 40 Qmin 400 Q [US.gpm] 70 75 78 η [%] 83.4 50 60 70 75 100 78 30 80.9 50 60 H [m] 70 ø174 75 78 H [ft] 78.8 50 60 20 70 ø159 78 75 77.4 ø145 50 ø132 12 0 0 20 Q [m³/h] 40 10 60 Q [l/s] 80 100 20 120 140 30 160 40 7.5 ø174 20 6 ø132 4 NPSH [ft] R NPSH [m] R 2 5 15 20 ø174 P [hp] 10 ø159 P [kW] 10 ø145 ø132 5 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,979 P: 1,021 1 0 20 Q [m³/h] 40 60 80 100 120 140 160 1311.45/11-EN K1311.452/36/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 43 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 080-065-200, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 70 200 0 200 50 Qmin 400 Q [US.gpm] 600 400 Q [IM.gpm] 60 70 75 η [%] 60 50 60 200 81.0 70 75 50 H [ft] 79.7 60 70 50 75 H [m] 50 50 40 60 ø219 70 70 ø206 75 75 75 76.3 77.8 60 50 150 78.3 60 75 70 74.2 ø193 75 ø180 30 100 ø175 70 ø165 0 0 20 Q [m³/h] 40 10 60 Q [l/s] 80 100 20 120 140 30 160 40 18 ø219 NPSH [ft] 4 R ø165 NPSH 10 [m] R 2 4 30 40 ø219 P [kW] P [hp] ø206 20 ø193 20 ø180 ø175 ø165 10 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,969 P: 1,032 0 20 Q [m³/h] 40 60 80 100 120 140 160 1311.45/11-EN K1311.452/37/2 44 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 080-065-250, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc 0 200 0 200 600 400 Q [IM.gpm] 96 Qmin 400 Q [US.gpm] 50 60 600 70 75 90 300 η [%] 76.6 50 60 H [ft] 70 75 75 80 75.8 50 250 75 60 70 ø260 73.0 70 50 60 50 60 70 70 60 ø246 72.0 70 200 71.6 70 ø232 70 H [m] ø220 ø215 50 46 0 0 20 Q [m³/h] 40 10 60 Q [l/s] 80 100 20 120 140 30 160 40 20 6 NPSH [ft] R 4 10 NPSH [m] R 2 50 60 ø260 40 ø246 40 ø232 ø220 ø215 20 P [hp] 20 P [kW] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,971 P: 1,030 0 0 20 Q [m³/h] 40 60 80 100 120 140 0 160 1311.45/11-EN K1311.452/38/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 45 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 080-065-315, n = 2900 rpm Etabloc 0 160 200 Q [US.gpm] 0 400 200 Q [IM.gpm] 50 60 Qmin 600 800 400 65 1000 600 800 69 η [%] 140 50 60 73.2 65 69 400 120 50 60 50 60 100 H [m] 72.8 65 69 ø320 71.9 65 69 69 60 65 80 H [ft] ø303 71.5 50 69 69 69 ø285 70.9 69 ø270 65 60 200 ø245 0 50 0 Q [m³/h] 20 100 Q [l/s] 150 200 40 60 ø320 8 30 NPSH [ft] 3% NPSH [m] 3% ø245 20 6 4 100 ø320 80 100 ø303 60 P [hp] ø285 P [kW] ø270 40 50 ø245 20 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,971 P: 1,030 0 50 Q [m³/h] 100 150 200 1311.45/11-EN K1311.452/39/4 46 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 100-080-160, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 0 40 200 Q [US.gpm] 400 200 Qmin 600 400 Q [IM.gpm] 50 800 60 1000 600 1200 800 1000 70 80 50 85 60 η [%] 70 100 87.3 30 50 80 60 70 50 85 83.0 60 ø174/A01H [ft] 70 79.2 80 20 76.4 ø162/A01 H [m] ø155/149/10°/A05 Ø174 - Ø154: Form/Type A01 Ø153 - Ø144: Form/Type A05 Ø143 - Ø138: Form/Type A06 ø153/138/135/25°/A06 10 0 50 0 50 Q [m³/h] 20 100 Q [l/s] 150 200 40 250 60 300 80 ø153/138/135/25°/A06 10 35 NPSH [ft] R ø174/A01 NPSH [m] R 20 5 10 2 23 30 ø174/A01 20 P [hp] ø162/A01 15 20 ø155/149/10°/A05 ø153/138/135/25°/A06 10 P [kW] 10 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,970 P: 1,031 5 0 50 Q [m³/h] 100 150 200 250 300 1311.45/11-EN K1311.452/40/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 47 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 100-080-200, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc 0 200 Q [US.gpm] 400 0 200 Q [IM.gpm] Qmin 50 60 50 60 600 800 400 1000 600 1200 800 1000 70 80 60 η [%] 70 80 50 60 50 60 50 60 70 80 70 83.3 80 82.5 80 60 150 80 70 40 50 H [ft] 84.1 80 H [m] 200 85.2 80 81.6 70 ø219 ø208 80 80 80 ø199 ø190 80.7 80 100 ø180 70 20 0 50 0 Q [m³/h] 20 100 150 Q [l/s] 40 200 250 60 80 8 NPSH [m] R 20 6 NPSH [ft] R 4 10 60 ø219 40 ø208 P [kW] 40 ø199 ø190 P [hp] ø180 20 ø165 20 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,952 P: 1,051 0 0 0 50 Q [m³/h] 100 150 200 250 1311.45/11-EN K1311.452/41/3 48 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 100-080-250, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc 0 0 200 400 200 Q [IM.gpm] Qmin 100 600 Q [US.gpm] 800 400 60 1000 600 70 800 1000 75 79 60 1200 70 η [%] 300 81.6 75 79 60 70 75 80 70 60 H [m] 60 70 70 75 60 H [ft] 75 75 75 79 81.2 79 60 80.9 79 79 ø269 79 79 80.5 79 ø256 80.3 200 79 80.1 ø243 79 79 ø231 ø223 ø215 40 0 50 0 Q [m³/h] 20 100 150 Q [l/s] 40 200 250 300 60 80 10 NPSH [m] 3% 20 5 NPSH [ft] 3% 0 0 80 ø269 60 100 ø256 P [kW] P [hp] ø243 ø231 40 50 ø223 ø215 20 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,958 P: 1,044 0 50 Q [m³/h] 100 150 200 250 300 1311.45/11-EN K1311.452/42/4 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 49 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 100-080-315, n = 2900 rpm 0 500 0 200Q [IM.gpm] 400 Qmin 160 50 1000 Q [US.gpm] 600 60 70 1500 800 1000 1200 75 η [%] 80.0 140 50 120 50 60 60 70 75 ø334 78.4 70 400 75 100 50 77.0 60 70 ø311 H [m] H [ft] 75 75 75.6 80 ø290 75 200 ø265 60 0 50 Q [m³/h] 100 0 20 Q [l/s] 150 200 40 250 60 300 350 80 100 50 10 NPSH [ft] R NPSH [m] R 0 0 150 ø334 200 P [kW] ø311 P [hp] 100 ø290 100 ø265 50 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,950 P: 1,053 0 50 Q [m³/h] 100 150 200 250 300 350 1311.45/11-EN K1311.452/43/5 50 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 125-100-160, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc 0 500 0 500 Qmin 40 50 1000 Q [US.gpm] 1500 1000 Q [IM.gpm] 60 130 70 80 50 η [%] 60 H [ft] 70 50 84.5 60 70 50 30 80 100 60 83.0 80 70 80 H [m] 82.1 ø185/A01 80.9 80 80 80 20 ø180/168/162/18°/A06 60 ø179/162/162/25°/A06 Ø185 - Ø177: Form/Type A01 Ø176 - Ø169: Form/Type A05 Ø168 - Ø162: Form/Type A06 16 ø180/174/9°/A05 0 50 Q [m³/h] 100 0 20 Q [l/s] 150 200 40 250 60 300 80 350 400 100 ø185/A01 8 26 NPSH [ft] ø179/162/162/25°/A06 R 20 6 NPSH [m] R 14 4 34 ø185/A01 30 40 ø180/174/9°/A05 P [hp] P [kW] ø180/168/162/18°/A06 30 ø179/162/162/25°/A06 20 20 12 0 50 Q [m³/h] 100 150 200 250 300 350 400 1311.45/11-EN K1311.452/45/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 51 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 125-100-200, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc 0 500 0 Q [US.gpm] 500 Qmin 50 60 1000 1500 1000 Q [IM.gpm] 70 1500 η [%] 80 200 60 50 60 85.9 70 H [ft] 80 50 50 60 70 82.6 H [m] 150 80 40 50 60 50 60 82.3 70 ø219/A01 80 80 ø206/A01 70 79.7 ø193/A01 30 100 76.3 ø180/A01 Ø219 - Ø179: Form/Type A01 Ø178 - Ø176: Form/Type A05 Ø175 - Ø170: Form/Type A06 0 50 0 Q [m³/h] 100 20 Q [l/s] ø185/170/168/22°/A06 150 200 40 250 60 80 350 400 100 ø185/170/168/22°/A06 8 NPSH 300 26 NPSH [m] [ft] 3% 3% ø219/A01 20 6 14 4 60 80 ø219/A01 P [kW] ø206/A01 60 40 ø193/A01 P [hp] ø180/A01 40 ø185/170/168/22°/A06 20 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,980 P: 1,020 0 50 Q [m³/h] 100 150 200 250 300 350 20 400 1311.45/11-EN K1311.452/46/4 52 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 125-100-250, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc 0 500 0 500 Qmin 100 1500 1000 Q [IM.gpm] 50 60 70 50 60 70 50 1000 Q [US.gpm] 1500 80 η [%] 85 80 70 85 84.9 80 80 50 300 86.3 60 H [ft] 82.8 60 70 80 50 ø262 80 80 60 ø269 80.2 60 200 80 70 ø250 H [m] 77.3 ø232 40 ø210 30 0 50 Q [m³/h] 100 0 20 Q [l/s] 150 200 40 250 60 300 100 350 80 400 100 9 ø269 8 28 ø210 NPSH [ft] R 20 6 NPSH [m] R 14 4 100 ø269 ø262 80 100 ø250 60 ø232 40 P [hp] ø210 50 P [kW] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,965 P: 1,036 20 0 50 Q [m³/h] 100 150 200 250 300 350 400 1311.45/11-EN K1311.452/47/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 53 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 125-100-315, n = 2900 rpm 0 500 0 500 Qmin 160 1000 Q [US.gpm] Q [IM.gpm] 60 70 1500 2000 1000 1500 75 80 60 70 η [%] 75 140 80 60 83.3 70 75 400 82.6 120 80 60 60 ø332 70 75 70 82.2 75 100 80 60 H [m] 80 ø318 80 80 81.5 70 83.2 75 80 80 ø280 80.6 80 60 H [ft] ø300 80 ø270 200 ø250 0 100 Q [m³/h] 0 200 300 Q [l/s] 50 400 500 100 35 10 NPSH [ft] NPSH R [m] R 20 5 10 200 ø332 ø318 150 200 ø300 P [hp] ø280 ø270 100 P [kW] ø250 100 50 0 0 0 100 Q [m³/h] 200 300 400 500 1311.45/11-EN K1311.452/48/2 54 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 150-125-200, n = 2900 rpm Etanorm SYT, Etanorm V, Etabloc 0 1000 0 500 Q [IM.gpm] 70 Qmin 50 2000 Q [US.gpm] 1000 1500 2000 60 70 75 80 60 200 85 50 η [%] 60 70 H [ft] 87.9 75 80 50 50 60 85 70 50 80 60 40 150 85 85.6 75 85 70 ø224/A01 83.1 75 79.2 80 ø210/A01 100 30 75 H [m] 20 Ø224 - Ø205: Form/Type A01 Ø204 - Ø182: Form/Type A06 0 100 0 ø206/195/196/15°/A06 ø208/182/196/34°/A06 Q [m³/h] 200 300 Q [l/s] 50 400 500 100 600 150 11.5 ø224/A01 ø208/182/196/34°/A06 36 NPSH [ft] 10 R 30 NPSH [m] R 8 24 7 90 120 ø224/A01 80 100 ø210/A01 60 P [hp] 80 ø206/195/196/15°/A06 P [kW] ø208/182/196/34°/A06 40 60 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,976 P: 1,025 30 0 100 Q [m³/h] 200 300 400 500 600 1311.45/11-EN K1311.452/50/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 55 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump n = 1450 rpm Etanorm 040-025-160, n = 1450 rpm Etanorm SYT, Etabloc, Etabloc SYT 0 5 0 5 Qmin 15 15 20 15 20 20 10 Q [IM.gpm] 11 10 10 Q [US.gpm] 15 25 30 8 15 15 η [%] 30 25 31.8 30 20 30.3 25 30 H [ft] 30 28.6 20 25 6 20 27.1 15 25 ø169 25 20 25 ø165 24.6 4 ø155 20 H [m] ø145 10 ø135 2 0 0.0 0.2 1 Q [m³/h] Q [l/s] 0.4 2 3 0.6 4 0.8 1.0 5 1.2 ø169 10 20 5 NPSH [ft] NPSH [m] R R ø135 0 0 0.3 0.4 ø169 ø165 P [hp] 0.2 ø155 ø145 P [kW] 0.2 ø135 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,970 P: 1,031 0.04 0 1 Q [m³/h] 2 3 4 5 K1311.454/14/2 56 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 1311.45/11-EN 0.1 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 040-025-200, n = 1450 rpm Etanorm SYT, Etabloc, Etabloc SYT 0 5 0 5 14 15 20 15 20 15 12 15 20 10 Q [IM.gpm] 16 Qmin 10 Q [US.gpm] 15 20 25 η [%] 25 31.0 20 40 28.6 25 ø209 26.2 15 10 20 ø205 H [ft] 25 23.3 15 8 20 ø195 20.6 20 6 20 ø180 H [m] ø165 4 0 1 Q [m³/h] 0.0 2 3 Q [l/s] 0.5 4 5 1.0 1.5 5.5 ø209 ø165 4 10 2 NPSH [ft] R NPSH [m] R 0 0 0.58 ø209 0.5 ø205 0.6 ø195 0.4 P [hp] ø180 0.3 0.4 ø165 P [kW] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,920 P: 1,087 0.2 0 1 Q [m³/h] 2 3 4 5 1311.45/11-EN K1311.454/15/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 57 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-125.1, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 20 0 10 Q [IM.gpm] Qmin 6 40 20 30 50 40 40 Q [US.gpm] 40 20 55 50 60 55 η [%] 61.8 60 H [ft] 61.5 5 40 50 60 55 15 60 60 4 40 50 60.2 60 55 ø139 ø134 55 H [m] 57.8 55 40 50 3 55 55 10 ø124 56.0 55 ø114 2 ø104 0 2 NPSH 2 Q [m³/h] 0 4 6 Q [l/s] 1 8 10 2 12 3 ø139 5 [m] R 1 NPSH [ft] R ø104 ø114 0 0 ø139 ø134 0.2 ø124 P [kW] 0.2 ø114 0.1 ø104 P [hp] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,982 P: 1,018 0.0 0.0 0 2 Q [m³/h] 4 6 8 10 12 1311.45/11-EN K1311.454/17/2 58 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-160.1, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 10 10 Q [US.gpm] 0 10 Qmin 20 30 20 Q [IM.gpm] 30 40 40 30 40 45 30 η [%] 50 30 50 40 51.4 8 H [ft] 30 44.7 H [m] 50 39.0 6 20 30 40 36.4 ø170 ø162 4 ø150 ø135 0 4 NPSH 2 Q [m³/h] 0 4 6 Q [l/s] 1 10 8 10 2 12 3 ø170 10 [m] R 2 ø135 NPSH [ft] R 0 0 0.4 ø170 ø162 ø150 0.3 0.4 P [kW] P [hp] ø135 0.2 0.2 0.1 0 2 Q [m³/h] 4 6 8 10 12 1311.45/11-EN K1311.454/18/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 59 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-200.1, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 20 0 10 20 Q [IM.gpm] Qmin 35 40 Q [US.gpm] 30 40 40 14 45 η [%] 35 50 40 45 12 35 50 50 40 H [ft] 45 ø204 50.7 10 48.4 35 H [m] 40 50.4 50 30 40 45 ø193 8 47.3 ø180 6 20 ø168 0 2 Q [m³/h] 0 4 6 Q [l/s] 1 8 10 12 2 3 ø168 ø204 8 2 NPSH [ft] R NPSH [m] R 0 0 0.8 1.0 ø204 0.6 ø193 P [kW] P [hp] ø180 0.4 0.5 ø168 0.2 0 2 Q [m³/h] 4 6 8 10 12 1311.45/11-EN K1311.454/19/2 60 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-250.1, n = 1450 rpm Etanorm V, Etabloc 0 20 0 10 20 Q [IM.gpm] 24 Qmin 40 Q [US.gpm] 25 30 25 30 60 30 40 35 20 50 η [%] 35 37.5 25 30 25 15 35 30 25 60 36.5 35.4 35 35 H [ft] 35 30 34.8 25 30 H [m] ø254 34.4 ø246 40 34.0 ø232 10 ø220 ø210 ø200 7 0 2 Q [m³/h] 0 4 6 Q [l/s] 1 8 10 12 2 14 3 6 20 ø254 NPSH [ft] R 4 NPSH [m] 10 ø200 R 2 1 1.5 2 ø254 ø246 P [hp] ø232 1.0 ø220 P [kW] 1 ø210 ø200 0.5 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,946 P: 1,057 0.2 0 2 Q [m³/h] 4 6 8 10 12 14 1311.45/11-EN K1311.454/20/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 61 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-125, n = 1450 rpm Etanorm V, Etabloc 0 20 0 40 Q [US.gpm] 20 Qmin 60 40 Q [IM.gpm] 50 55 80 60 60 η [%] 65 6 20 50 55 68.0 60 65 H [m] 65.6 50 55 65 60 65 H [ft] ø139 64.8 4 50 55 ø130 60 50 55 62.3 10 ø120 59.3 ø110 2 0 0.9 0 2 Q [m³/h] 4 1 6 Q [l/s] 8 10 2 12 14 3 16 18 4 20 5 ø139 NPSH [m] R 2 ø104 0.5 NPSH [ft] R 0.5 0.1 ø139 0.3 0.4 ø130 P [kW] P [hp] ø120 0.2 ø110 0.2 ø104 0.1 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,993 P: 1,007 0 2 Q [m³/h] 4 6 8 10 12 14 16 18 20 1311.45/11-EN K1311.454/21/2 62 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-160, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 20 0 20 Qmin 40 10 40 Q [US.gpm] 60 40 Q [IM.gpm] 50 80 60 80 55 60 η [%] 40 50 55 30 64.4 8 60 40 H [m] 50 H [ft] 61.0 55 60 60 40 57.4 50 6 ø174 20 55 56.1 40 50 ø162 55 55 54.9 ø150 4 ø141 ø132 0 5 0 Q [m³/h] 2 10 Q [l/s] 10 15 20 4 6 ø174 20 6 NPSH [m] R 4 ø132 NPSH [ft] R 2 5 0.6 ø174 0.8 ø162 P [kW] 0.6 ø150 0.4 P [hp] ø141 0.4 ø132 0.2 0.2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,985 P: 1,015 0 5 Q [m³/h] 10 15 20 1311.45/11-EN K1311.454/22/3 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 63 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-200, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 20 Q [US.gpm] 0 20 60 35 35 40 40 45 45 60 50 50 55 55 14 35 40 45 80 40 Q [IM.gpm] 16 Qmin 40 55.9 η [%] 55.5 55 50 55 40 12 53.3 35 40 50 45 50 10 35 40 ø209 ø206 50 51.2 45 50 H [ft] 50 48.8 8 ø193 H [m] 45 45 6 20 ø180 40 ø170 4.5 0 2 Q [m³/h] 4 6 0 8 10 12 14 Q [l/s] 2 16 18 20 4 1.7 ø209 1.5 NPSH [m] 4 R ø170 1.0 NPSH [ft] R 2 0.6 1.2 ø209 ø206 1.5 1.0 P [hp] ø193 P [kW] 1.0 ø180 ø170 0.5 0.5 0.1 0 2 Q [m³/h] 4 6 8 10 12 14 16 18 20 1311.45/11-EN K1311.454/23/1 64 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-250, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 25 20 0 40 Q [US.gpm] 20 60 40 Q [IM.gpm] Qmin 35 80 60 80 40 45 η [%] H [ft] 47.6 35 40 20 45 46.1 35 45 60 40 H [m] 45 35 44.1 40 15 ø261 43.6 35 40 40 ø246 40 42.9 40 40 40 ø232 ø220 10 ø205 0 2Q [m³/h] 4 6 0 8 10 12 14 Q [l/s] 2 16 18 20 4 ø261 10 40 NPSH [ft] R NPSH 20 [m] R ø205 0 0 ø261 2.0 ø246 1.5 2 ø232 P [kW] P [hp] ø220 1.0 ø205 1 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,925 P: 1,081 0.5 0 2Q [m³/h] 4 6 8 10 12 14 16 18 20 1311.45/11-EN K1311.454/24/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 65 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-040-125, n = 1450 rpm Etanorm V, Etabloc 0 0 50 20 7 40 Q [IM.gpm] Qmin 50 60 100 Q [US.gpm] 60 65 80 70 75 6 50 100 η [%] 20 77.4 60 65 70 75 5 50 75 76.1 60 H [ft] 65 70 75 4 ø139 74.2 50 60 50 60 3 ø130 65 70 65 70.5 H [m] 10 ø120 70 67.1 ø110 ø104 2 0 5 0 Q [m³/h] 2 10 Q [l/s] 15 20 4 25 30 6 8 0.9 ø139 NPSH [m] R 2 ø104 0.5 NPSH [ft] R 0.5 0.1 0.55 ø139 0.6 0.4 ø130 0.4 ø120 P [hp] ø110 0.2 ø104 0.2 P [kW] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,946 P: 1,058 0.0 0 5 Q [m³/h] 10 15 20 25 0.0 30 1311.45/11-EN K1311.454/25/1 66 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-040-160, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 50 0 50 Qmin 56 100 Q [US.gpm] 150 100 Q [IM.gpm] 63 68 71 η [%] 10 73.5 56 30 63 68 71 71 8 56 73.1 H [ft] 63 68 H [m] 71 ø174 71 72.1 6 20 ø160 71 56 63 68 ø147 68.9 68 4 ø128 2 NPSH 0 5 Q [m³/h] 10 0 2 Q [l/s] 15 20 4 25 6 10 30 35 8 10 5 [m] R 1 NPSH [ft] R 1 1.0 ø174 ø160 P [kW] 1.0 ø147 P [hp] 0.5 ø128 0.5 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,955 P: 1,047 0.0 0 5 Q [m³/h] 10 15 20 25 30 0.0 35 1311.45/11-EN K1311.454/26/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 67 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-040-200, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 0 50 20 16 Q [IM.gpm] 40 Qmin 40 14 40 40 100 Q [US.gpm] 60 50 55 50 55 50 150 80 100 120 60 η [%] 65.1 60 63.6 55 12 40 60 40 50 61.4 55 60 40 10 60 50 60 59.2 55 55 55 57.1 40 55 50 8 55 52.8 ø209 H [ft] ø202 55 ø192 H [m] ø182 50 ø173 20 6 ø160 5 0 5 0 Q [m³/h] 2 10 Q [l/s] 15 20 4 25 6 30 35 8 2.8 9 NPSH [ft] R 2 5 NPSH [m] R 1 1.7 ø209 1.5 2 ø202 P [hp] ø192 1.0 ø182 ø173 P [kW] 1 ø160 0.5 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,960 P: 1,042 0.2 0 5 Q [m³/h] 10 15 20 25 30 35 1311.45/11-EN K1311.454/27/1 68 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-040-250, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 50 0 20 Q [IM.gpm] 40 25 Qmin 60 40 η [%] 54 57.1 56.8 54 54 15 50 54 55.2 H [m] 50 ø260 H [ft] ø252 50 54 40 50 52.2 ø235 50 10 60 54 54 56.2 50 40 120 80 50 40 100 54 50 40 150 80 50 40 20 100 Q [US.gpm] 40 40 ø218 20 5 ø195 0 1.5 NPSH 5 0 Q [m³/h] 10 2 Q [l/s] 15 20 4 25 30 6 35 8 10 [m] 4 R 1.0 NPSH [ft] R 2 0.5 3 4 ø260 ø252 P [kW] P [hp] ø235 2 ø218 2 ø195 1 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,988 P: 1,012 0 5 Q [m³/h] 10 15 20 25 30 35 1311.45/11-EN K1311.454/28/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 69 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-040-315, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 50 0 20 Q [IM.gpm] 40 40 Qmin 100 Q [US.gpm] 60 30 35 30 35 80 40 120 η [%] 40 30 100 44.2 35 42.7 100 30 39.7 H [m] 40 40 30 35 36.0 20 35 35 30 35 ø326 H [ft] ø318 32.8 ø300 30 50 30 ø280 ø260 10 0 5 0 Q [m³/h] 2 10 15 Q [l/s] 4 20 25 30 6 8 ø326 20 5 NPSH NPSH [ft] 3% [m] 3% ø260 0 0 6 8 ø326 P [kW] ø318 6 ø300 4 P [hp] ø280 4 ø260 2 2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,942 P: 1,061 0 5 Q [m³/h] 10 15 20 25 30 1311.45/11-EN K1311.454/29/3 70 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-050-125, n = 1450 rpm Etanorm V, Etabloc 0 50 0 Q [US.gpm] 50 100 150 100 Q [IM.gpm] 7 Qmin 60 65 200 150 200 70 6 65 20 η [%] 75 60 250 70 79.4 75 60 H [ft] 65 70 75 77.3 4 60 65 70 70 75 75 75.5 75 70 72.3 H [m] 70 ø142 10 65 70 65 65 ø130 60 60 2 ø120 ø112 1 0 10 Q [m³/h] 0 20 30 Q [l/s] 5 40 50 10 60 15 7 ø142 2 NPSH [ft] R NPSH [m] 5 ø112 R 1 1 0.2 0.8 ø142 0.6 1.0 ø130 P [hp] ø120 0.4 ø112 0.5 P [kW] 0.2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,992 P: 1,008 0.1 0 10 Q [m³/h] 20 30 40 50 60 1311.45/11-EN K1311.454/30/1 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 71 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-050-160, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 50 0 100 Q [US.gpm] 50 Q [IM.gpm] 11.5 Qmin 50 60 150 200 100 250 150 200 70 75 η [%] 10 50 60 70 79.4 75 50 8 60 70 30 78.8 H [ft] 75 ø174 78.1 50 6 50 60 75 70 75 60 H [m] 20 ø162 75 76.9 70 73.3 ø150 75 70 4 ø135 ø128 10 2.5 0 10 Q [m³/h] 0 20 30 Q [l/s] 5 40 50 10 60 15 ø174 14 4 NPSH [ft] R ø128 NPSH [m] 10 R 2 2 0.5 1.7 ø174 1.5 2 ø162 P [hp] 1.0 ø150 1 ø135 ø128 0.5 P [kW] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,975 P: 1,026 0.0 0 10 Q [m³/h] 20 30 40 50 0 60 1311.45/11-EN K1311.454/31/1 72 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-050-200, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 100 0 50 Q [IM.gpm] 50 Qmin 200 Q [US.gpm] 100 150 200 60 70 η [%] 73.7 50 15 60 70 50 72.0 60 70 H [m] 70 70 50 40 70.5 70 60 60 50 10 60 60 68.4 65.1 60 H [ft] ø206 60 60 ø219 ø193 ø180 20 ø170 5 0 1.8 10 Q [m³/h] 0 20 30 Q [l/s] 5 40 50 10 60 15 ø219 NPSH [m] 3% ø170 4 1 NPSH [ft] 3% 2 0.4 3 4 ø219 P [kW] ø206 P [hp] 2 ø193 2 ø180 ø170 1 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,980 P: 1,021 0 10 Q [m³/h] 20 30 40 50 60 1311.45/11-EN K1311.454/32/3 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 73 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-050-250, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 25 50 0 Q [US.gpm] 50 100 150 200 100 Q [IM.gpm] 250 150 200 80 Qmin 50 60 65 η [%] H [ft] 50 60 67.7 20 65 50 66.2 60 H [m] 65 64.8 50 15 60 65 60 ø260 ø246 62.0 ø232 40 60 ø215 10 0 10 Q [m³/h] 0 20 30 Q [l/s] 5 40 50 10 15 ø260 4 14 NPSH [ft] NPSH R ø215 [m] 10 R 2 2 4 ø260 ø246 3 4 ø232 P [kW] P [hp] ø215 2 2 1 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,970 P: 1,031 0 10 Q [m³/h] 20 30 40 50 1311.45/11-EN K1311.454/33/2 74 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-050-315, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 100 0 50 Q [IM.gpm] 39 Qmin 40 50 200 Q [US.gpm] 100 300 150 55 200 60 120 35 η [%] 65 40 50 250 65.7 55 65 60 100 30 40 50 63.3 55 H [ft] 60 25 ø323 60 62.1 40 50 80 55 60 H [m] ø303 58.9 20 ø285 55 60 ø265 16 0 10 0 Q [m³/h] 20 30 Q [l/s] 5 40 50 10 60 70 15 20 5.5 ø323 4 10 2 ø323 NPSH [ft] R NPSH [m] R 0 0 9 8 ø323 10 ø303 6 P [hp] ø285 ø265 4 5 P [kW] 2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,935 P: 1,070 0.5 0 10 Q [m³/h] 20 30 40 50 60 70 1311.45/11-EN K1311.454/34/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 75 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 080-065-125, n = 1450 rpm Etanorm V, Etabloc 0 100 0 100 Qmin 200 Q [US.gpm] 50 300 200 Q [IM.gpm] 60 η [%] 70 6 300 20 75 80 81.8 H [m] 50 50 4 60 70 80 75 75 60 50 60 50 60 70 75 76.4 10 75 74.4 70.9 70 70 60 Ø141 - Ø130: Form/Type A01 Ø129 - Ø113: Form/Type A05 Ø112 - Ø109: Form/Type A06 0 5 30 Q [l/s] 40 ø130/A01 70 2 10 Q [m³/h] 20 ø141/A01 75 70 70 0 H [ft] 79.1 50 10 ø126/120/12°/A05 ø125/114/22°/A05 ø123/109/100/28°/A06 60 15 70 80 20 5.5 ø141/A01 1.5 NPSH [ft] R NPSH ø123/109/100/28°/A06 [m] 4 R 1.0 3 1.5 ø141/A01 1.0 P [hp] ø130/A01 P [kW] 1.0 ø126/120/12°/A05 0.5 ø125/114/22°/A05 ø123/109/100/28°/A06 0.5 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,974 P: 1,026 0 10 Q [m³/h] 20 30 40 50 60 70 80 1311.45/11-EN K1311.454/35/3 76 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 080-065-160, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 100 0 200 Q [US.gpm] 100 300 200 Q [IM.gpm] 300 10 Qmin 50 60 70 76 η [%] 30 81.8 50 8 60 70 76 H [ft] 79.3 50 60 70 20 ø174 76 6 77.3 50 60 H [m] 76 70 76 ø159 75.8 4 ø145 10 ø132 2.5 0 0 20 Q [m³/h] Q [l/s] 5 40 10 60 80 15 20 25 2 5 NPSH [m] R 1 NPSH [ft] R 1 0.2 2.0 ø174 1.5 2 ø159 P [hp] 1.0 ø145 P [kW] 1 ø132 0.5 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,979 P: 1,021 0.1 0 20 Q [m³/h] 40 60 80 1311.45/11-EN K1311.454/36/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 77 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 080-065-200, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 100 0 50 Qmin 200 Q [US.gpm] 100 Q [IM.gpm] 60 70 300 200 300 74 η [%] 15 50 60 50 79.5 70 74 78.1 60 70 H [m] 74 74 50 50 10 76.9 60 70 74 74 60 74 75.0 74 76.6 70 ø206 H [ft] 70 74 73.1 40 ø219 70 60 50 74 70 ø193 70 70 ø180 ø175 20 ø165 5 0 0 20 Q [m³/h] Q [l/s] 5 40 10 60 80 15 20 25 7 2 ø219 NPSH [ft] R NPSH 5 [m] R ø165 1 2 ø219 3 4 ø206 P [kW] P [hp] ø193 2 ø180 ø175 2 ø165 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,969 P: 1,032 1 0 20 Q [m³/h] 40 60 80 1311.45/11-EN K1311.454/37/2 78 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 080-065-250, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 100 0 100 300 200 Q [IM.gpm] 24 Qmin 200 Q [US.gpm] 50 60 50 60 300 68 74.6 η [%] 68 20 73.9 50 60 68 50 60 50 60 68 68 68 15 60 68 71.1 70.2 ø260 68 H [ft] 69.8 ø246 68 68 ø232 H [m] 40 ø220 ø215 10 0 0 20 Q [m³/h] Q [l/s] 5 40 10 60 15 80 20 25 2.8 9 NPSH [ft] R 2 5 NPSH [m] R 1 2 0.6 6 8 ø260 ø246 6 4 ø232 P [hp] ø220 ø215 P [kW] 4 2 2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,971 P: 1,030 0.5 0 20 Q [m³/h] 40 60 80 1311.45/11-EN K1311.454/38/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 79 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 080-065-315, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 40 100 Q [US.gpm] 0 200 100 Q [IM.gpm] 50 60 Qmin 300 400 200 65 500 300 400 69 η [%] 50 60 72.5 65 69 100 30 50 50 H [m] 50 50 72.1 60 65 60 60 60 69 71.3 65 65 ø320 69 69 69 70.9 65 20 69 69 69 70.3 69 H [ft] ø303 69 72.3 65 65 69 ø285 65 65 60 60 50 ø270 ø260 ø245 10 0 20 Q [m³/h] 0 40 60 Q [l/s] 10 100 20 30 ø320 ø245 2 NPSH 80 8 NPSH [ft] R 5 [m] R 1 ø320 10 ø303 P [kW] 10 ø285 ø270 ø260 ø245 5 P [hp] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,971 P: 1,030 0 0 0 20 Q [m³/h] 40 60 80 100 1311.45/11-EN K1311.454/39/2 80 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 100-080-160, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc, Etabloc SYT 0 200 0 10 200 Qmin 50 400 Q [US.gpm] 60 600 400 Q [IM.gpm] 70 30 80 83 50 η [%] 60 8 70 H [ft] 85.8 50 60 80 70 50 6 83 81.5 20 60 70 77.8 80 ø174/A01 H [m] 75.1 ø162/A01 4 ø155/149/10°/A05 Ø174 - Ø154: Form/Type A01 Ø153 - Ø144: Form/Type A05 Ø143 - Ø138: Form/Type A06 2.5 0 20 0 ø153/138/135/25°/A06 Q [m³/h] 40 10 60 Q [l/s] 80 100 20 120 30 10 140 40 3.5 ø153/138/135/25°/A06 10 NPSH [m] R ø174/A01 2 NPSH [ft] R 2 0.5 3 4 ø174/A01 ø162/A01 3 2 ø155/149/10°/A05 P [kW] P [hp] 2 ø153/138/135/25°/A06 1 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,970 P: 1,031 0.6 0 20 Q [m³/h] 40 60 80 100 120 1 140 1311.45/11-EN K1311.454/40/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 81 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 100-080-200, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 200 0 100 Q [IM.gpm] Qmin 50 400 Q [US.gpm] 200 60 600 300 400 500 70 80 16 50 η [%] 60 70 85.2 80 14 50 60 50 60 70 84.5 80 12 80 70 50 60 80 70 83.2 80 H [m] 60 ø219 80 10 50 40 83.9 80 82.6 70 ø208 80 80 80 81.4 8 H [ft] ø198 80 ø190 ø180 20 6 ø165 0 1.8 NPSH 0 20 Q [m³/h] 40 10 60 Q [l/s] 80 100 20 120 140 30 40 [m] R 4 1 NPSH [ft] R 2 0.4 6 8 ø219 6 ø208 4 ø198 ø190 P [kW] 4 ø180 P [hp] ø165 2 2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,952 P: 1,051 0 0 20 Q [m³/h] 40 60 80 100 120 0 140 1311.45/11-EN K1311.454/41/3 82 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 100-080-250, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 200 0 200 50 60 70 25 600 400 Q [IM.gpm] 27 Qmin 400 Q [US.gpm] 75 80 50 60 50 70 75 80 60 70 80 80 H [ft] 80.6 75 20 η [%] 81.0 80 50 60 50 60 50 60 70 75 80.0 75 70 75 75 79.6 70 75 79.2 15 60 75 78.9 ø269 ø256 ø243 75 75 H [m] 75 ø231 ø223 40 ø215 10 0 20 0 Q [m³/h] 40 10 60 Q [l/s] 80 100 20 120 140 30 40 3 9 NPSH [ft] 2 R 5 NPSH [m] R 1 2 0.4 10 ø269 8 ø256 10 ø243 6 P [hp] ø231 ø223 ø215 4 5 P [kW] 2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,958 P: 1,044 0.5 0 20 Q [m³/h] 40 60 80 100 120 140 1311.45/11-EN K1311.454/42/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 83 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 100-080-315, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 200 Q [US.gpm] 0 Qmin 50 40 400 200 Q [IM.gpm] 60 70 600 800 400 600 75 η [%] 79.5 H [m] 50 30 50 60 70 60 75 ø334 75 50 75 75.9 60 100 75 77.2 70 70 75 H [ft] ø311 74.5 20 ø290 70 50 ø265 0 6 0 20Q [m³/h] 40 10 60 Q [l/s] 80 100 20 120 30 140 160 180 40 200 50 15 4 NPSH [m] NPSH [ft] R R 2 0 0 20 ø334 ø311 15 P [kW] 20 ø290 P [hp] 10 ø265 10 5 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,950 P: 1,053 0 20Q [m³/h] 40 60 80 100 120 140 160 180 200 1311.45/11-EN K1311.454/43/3 84 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 100-080-400, n = 1450 rpm Etanorm V, Etabloc 0 60 200 0 200 Qmin 400 Q [US.gpm] 600 400 Q [IM.gpm] 50 60 800 600 65 70 η [%] 50 60 65 50 74.0 70 H [m] 50 73.3 60 150 65 70 70 70 72.2 40 50 50 60 ø398 65 70 60 H [ft] 70 ø380 71.2 65 70 69.9 ø355 30 100 65 65 ø330 ø315 0 20Q [m³/h]40 60 0 80 100 120 140 Q [l/s] 20 160 180 200 40 14 4 NPSH [ft] R NPSH 10 [m] R 2 2 ø398 30 40 ø380 P [kW] P [hp] ø355 20 ø330 20 ø315 10 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,977 P: 1,023 0 20Q [m³/h]40 60 80 100 120 140 160 180 200 1311.45/11-EN K1311.454/44/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 85 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 125-100-160, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 200 Q [US.gpm] 0 200 Qmin 10 50 400 600 400 Q [IM.gpm] 60 800 600 800 70 80 50 30 60 η [%] 70 50 84.3 60 70 8 50 80 H [ft] 60 70 82.8 80 81.8 80 80 80.6 6 80 80 20 80 ø185/A01 H [m] ø180/174/9°/A05 70 ø180/168/162/18°/A06 4 Ø185 - Ø177: Form/Type A01 Ø176 - Ø169: Form/Type A05 Ø168 - Ø162: Form/Type A06 3 0 50 0 ø179/162/162/25°/A06 10 Q [m³/h] 20 100 Q [l/s] 150 200 40 60 ø185/A01 3 10 ø179/162/162/25°/A06 NPSHR [ft] 2 5 NPSH [m] R 1 4.4 ø185/A01 4 ø180/174/9°/A05 ø180/168/162/18°/A06 4 3 ø179/162/162/25°/A06 P [kW] P [hp] 2 2 1.4 0 50 Q [m³/h] 100 150 200 1311.45/11-EN K1311.454/45/2 86 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 125-100-200, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 200 Q [US.gpm] 0 200 Qmin 16 50 400 600 400 Q [IM.gpm] 60 800 1000 600 800 70 80 η [%] 50 14 60 85.3 70 80 50 12 60 70 40 82.5 80 80 50 10 50 H [m] 60 82.0 70 80 60 80 70 ø219 H [ft] 77.8 ø206 8 ø193 74.6 70 6 20 ø180 ø170 0 3 50 0 Q [m³/h] 20 100 Q [l/s] 150 200 40 60 ø170 NPSH 9 [m] R ø219 NPSH [ft] R 2 5 1 8 ø219 10 ø206 6 P [hp] P [kW] ø193 4 ø180 5 ø170 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,980 P: 1,020 2 0 50 Q [m³/h] 100 150 200 1311.45/11-EN K1311.454/46/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 87 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 125-100-250, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 200 0 200 Qmin 25 400 Q [US.gpm] 50 50 600 400 Q [IM.gpm] 60 800 70 1000 600 800 80 80 η [%] 85.4 60 70 20 80 50 81.6 60 80 60 70 80 15 50 ø269 79.1 60 H [ft] 70 H [m] ø250 76.2 40 70 10 ø232 70 ø210 6 0 50 0 Q [m³/h] 20 100 Q [l/s] 150 20 200 40 3.4 60 ø210 3 ø269 10 NPSH [ft] R 2 5 NPSH [m] R 1 14 18 ø269 P [hp] 10 ø250 P [kW] 10 ø232 5 ø210 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,965 P: 1,036 2 1 0 50 Q [m³/h] 100 150 200 1311.45/11-EN K1311.454/47/2 88 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 125-100-315, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 200 Q [US.gpm] 400 0 200 60 70 60 800 400 Q [IM.gpm] Qmin 40 600 1000 600 800 75 η [%] 80 70 75 H [m] 81.7 60 80 70 75 30 60 60 ø334 80.7 75 80 75 70 H [ft] 81.6 75 20 ø318 80.0 80 60 100 80 80 70 70 80 81.1 ø300 80 79.0 ø280 75 ø270 50 ø250 0 4 50 0 Q [m³/h] 20 100 Q [l/s] 150 200 40 250 60 ø334 NPSH 10 [m] R ø250 2 NPSH [ft] R 2 ø334 ø318 20 ø300 P [kW] 20 ø280 ø270 ø250 10 P [hp] 0 0 0 50 Q [m³/h] 100 150 200 250 1311.45/11-EN K1311.454/48/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 89 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 125-100-400, n = 1450 rpm Etanorm V, Etabloc 60 0 500 0 200 Q [IM.gpm] 400 Qmin 1000 Q [US.gpm] 600 800 1000 1200 60 70 η [%] 75 60 50 75.7 70 75 H [m] 75 150 75.3 60 70 75 40 70 74.5 60 70 70 73.4 60 70 ø380 70 30 H [ft] ø401 72.8 100 ø355 70 ø330 ø317 0 50 0 Q [m³/h] 100 20 Q [l/s] 150 200 40 250 300 60 80 50 ø317 ø330 10 NPSH [ft] R NPSH [m] ø401 R 0 0 ø401 60 40 ø380 P [kW] 40 ø355 ø330 P [hp] ø317 20 20 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,980 P: 1,021 0 0 50 Q [m³/h] 100 150 200 250 0 300 1311.45/11-EN K1311.454/49/2 90 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 150-125-200, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 500 0 200 Q [IM.gpm] 400 18 Qmin 50 60 1000 Q [US.gpm] 600 70 1500 800 1000 1200 75 80 15 85 η [%] 50 60 70 87.5 75 80 50 40 60 85 70 75 50 10 85.3 85 80 60 85 70 82.8 ø224/A01 H [ft] 75 78.9 80 ø210/A01 H [m] 75 Ø224 - Ø205: Form/Type A01 Ø204 - Ø182: Form/Type A06 5 0 50 0 Q [m³/h] 20 ø206/195/196/15°/A06 20 ø208/182/196/34°/A06 100 Q [l/s] 150 200 40 250 60 300 350 80 3.6 ø224/A01 ø208/182/196/34°/A06 10 3 NPSH [ft] NPSH [m] R R 7 2 11 ø224/A01 10 ø210/A01 8 10 ø206/195/196/15°/A06 6 ø208/182/196/34°/A06 P [kW] P [hp] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,976 P: 1,025 4 5 0 50 Q [m³/h] 100 150 200 250 300 350 1311.45/11-EN K1311.454/50/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 91 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 150-125-250, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 500 0 500 60 1500 1000 Q [IM.gpm] 25 Qmin 1000 Q [US.gpm] 80 70 80 85 60 H [ft] 70 20 80 60 η [%] 70 87.9 85 60 80 60 86.3 70 15 85 80 ø269 85.1 85 H [m] ø252 82.8 40 ø237 10 ø218 8 0 50 0 Q [m³/h] 100 20 Q [l/s] 150 200 40 250 60 300 350 80 100 5 16 4 NPSH [ft] R 10 NPSH [m] R 2 4 1 18 ø269 15 20 ø252 P [hp] ø237 10 ø218 P [kW] 10 5 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,972 P: 1,029 2 0 50 Q [m³/h] 100 150 200 250 300 350 1311.45/11-EN K1311.454/51/2 92 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 150-125-315, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 500 0 500 Qmin 50 60 1500 1000 Q [IM.gpm] 42 40 1000 Q [US.gpm] 70 75 80 50 60 η [%] 120 70 75 35 84.6 80 30 50 60 50 60 50 50 25 60 60 70 75 83.6 80 70 100 ø334 75 82.6 80 70 75 70 75 H [ft] ø320 81.7 80 80.6 H [m] 79.9 80 ø306 80 80 ø294 20 ø280 60 ø270 17 0 50 0 Q [m³/h] 100 20 Q [l/s] 150 200 40 250 60 300 350 80 100 3.5 10 NPSH [m] R 2 NPSH [ft] R 2 0.5 38 ø334 30 ø320 40 ø306 P [hp] ø294 20 ø280 ø270 P [kW] 20 10 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,985 P: 1,015 4 0 50 Q [m³/h] 100 150 200 250 300 350 1311.45/11-EN K1311.454/52/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 93 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 150-125-400, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 500 0 Q [US.gpm] 500 Qmin 1000 1500 1000 Q [IM.gpm] 60 70 1500 75 200 80 60 η [%] 60 70 82.1 75 80 60 80 60 70 60 ø419 80 75 H [m] 40 80 75 50 60 H [ft] 81.0 70 150 81.4 80 70 75 ø399 80 81.1 80 70 80 75 ø380 80.8 80 80 ø362 80.6 80 30 100 ø346 ø330 0 50 0 Q [m³/h] 100 20 Q [l/s] 150 200 40 250 60 300 80 350 400 100 14 4 NPSH [ft] 3% NPSH 10 [m] 3% 2 2 100 ø419 60 ø399 P [hp] P [kW] ø380 ø362 40 50 ø346 ø330 20 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,980 P: 1,020 0 50 Q [m³/h] 100 150 200 250 300 350 400 1311.45/11-EN K1311.454/53/5 94 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 150-125-510, n = 1450 rpm 0 500 0 500 100 30 1500 1000 Q [IM.gpm] η [%] Qmin 50 30 1000 Q [US.gpm] 60 50 70 60 300 70 72.4 72.4 80 30 50 70 60 H [m] Qmax 70 70 H [ft] ø508/A01 71.4 60 30 50 ø508/496/28°/A05 200 70 60 70 70.5 ø463/450/28°/A05 70 40 ø417/400/35°/A05 0 50 Q [m³/h] 100 0 20 Q [l/s] 150 200 40 250 60 80 100 350 100 ø417/400/35°/A05 ø463/450/28°/A05 ø508/A01 10 NPSH 300 [m] 3% 20 5 NPSH [ft] 3% 0 0 ø508/A01 100 ø508/496/28°/A05 80 100 ø463/450/28°/A05 60 P [hp] P [kW] ø417/400/35°/A05 40 50 20 0 50 Q [m³/h] 100 150 200 250 300 350 1311.45/11-EN KGP.454/5V/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 95 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 200-150-200, n = 1450 rpm Etanorm V, Etabloc 0 500 0 500 Qmin 40 50 40 50 60 14 40 10 1500 60 50 50 60 40 50 60 75 70 40 70 75 65 η [%] 80 75 65 65 1500 70 65 60 40 65 2000 1000 Q [IM.gpm] 15.5 12 1000 Q [US.gpm] 70 70 80 82.1 80 75 81.5 80.9 80 75 80.3 79.7 8 80 H [ft] 80 80 80 75 75 75 75 6 4 0 100 ø224/A01 ø216/A01 20 70 ø221/206/200/15°/A06 ø220/198/200/22°/A06 ø218/188/200/30°/A06 70 Ø224 - Ø216: Form/Type A01 Ø215 - Ø210: Form/Type A05 Ø209 - Ø188: Form/Type A06 H [m] 70 75 Q [m³/h] 0 200 300 Q [l/s] 50 400 500 100 150 7.5 20 6 NPSH [ft] R 4 10 NPSH [m] R 2 14 ø224/A01 12 ø216/A01 15 ø221/206/200/15°/A06 10 ø220/198/200/22°/A06 P [hp] ø218/188/200/30°/A06 8 10 6 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,992 P: 1,009 P [kW] 4 0 100 Q [m³/h] 200 300 400 500 1311.45/11-EN K1311.454/55/2 96 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 200-150-250, n = 1450 rpm Etanorm V, Etabloc 0 1000 0 500 1000 Q [IM.gpm] 25 2000 Q [US.gpm] 1500 2000 80 Qmin 50 50 20 50 50 15 60 60 70 70 50 60 50 60 80 η [%] 85 75 80 60 60 75 70 70 70 89.7 85 75 60 80 75 80 85 88.2 75 80 70 75 85 85.3 80 H [m] 84.1 H [ft] 85 87.0 85 ø269 85 85 40 ø258 82.6 80 10 80 ø250 ø239 80 ø230 ø220 20 6 0 100 0 Q [m³/h] 200 300 Q [l/s] 50 400 500 100 600 150 5 16 4 NPSH [ft] R 10 NPSH [m] R 2 28 ø269 30 ø258 20 P [hp] ø250 ø239 P [kW] 20 ø230 ø220 10 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,970 P: 1,031 6 0 100 Q [m³/h] 200 300 400 500 10 600 1311.45/11-EN K1311.454/56/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 97 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 200-150-315, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 40 500 Q [US.gpm] 1000 0 500 Qmin Q [IM.gpm] 60 1500 2000 1000 2500 1500 2000 70 80 85 60 80 60 88.3 70 30 100 80 60 70 60 H [m] η [%] 70 84.7 85 80 70 83.5 60 80 70 ø334 84.0 20 H [ft] 80 80 83.1 ø317 80 79.2 ø303 ø290 80 50 ø277 ø264 10 0 4 NPSH 100 Q [m³/h] 0 200 300 Q [l/s] 50 400 500 600 100 150 10 [m] R 2 NPSH [ft] R 2 50 ø334 60 40 P [hp] ø317 ø303 30 40 ø290 P [kW] ø277 ø264 20 20 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,974 P: 1,027 10 0 100 Q [m³/h] 200 300 400 500 600 1311.45/11-EN K1311.454/57/3 98 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 200-150-400, n = 1450 rpm Etanorm SYT, Etanorm V, Etabloc 0 1000 0 500 Qmin Q [IM.gpm] 60 2000 Q [US.gpm] 1000 1500 2000 70 80 60 60 200 η [%] 85 86.6 70 H [ft] 80 50 85 60 85 70 85.9 80 40 60 150 80 85 ø419 70 84.5 80 80 H [m] 83.7 30 80 ø385 100 80 ø355 70 20 ø330 0 0 100 Q [m³/h] 200 50 300 Q [l/s] 400 500 100 600 150 ø419 20 5 ø330 NPSH NPSH [ft] 3% [m] 3% 0 0 ø419 80 100 ø385 60 P [hp] P [kW] ø355 40 ø330 50 20 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,993 P: 1,007 0 100 Q [m³/h] 200 300 400 500 600 1311.45/11-EN K1311.454/58/3 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 99 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 200-150-510, n = 1450 rpm 0 100 1000 0 500 30 40 Q [IM.gpm] Qmin 60 2000 Q [US.gpm] 1000 1500 2000 η [%] 70 74.5 300 77.1 30 40 30 40 80 60 70 74.5 74.5 70 H [m] 74.5 74.5 75.5 30 60 40 H [ft] Qmax 76.4 60 ø508/A01 74.5 60 70 74.5 70 75.0 200 70 ø488/472/A05 74.5 ø463/447/28°/A05 70 40 ø420/404/28°/A05 0 0 100 Q [m³/h] 200 300 Q [l/s] 50 400 500 100 100 600 150 ø508/A01 10 NPSH 40 NPSH [ft] 3% ø488/472/A05 ø463/447/28°/A05 20 [m] 3% ø420/404/28°/A05 0 0 ø508/A01200 150 P [kW] ø488/472/A05 100 P [hp] ø463/447/28°/A05 100 ø420/404/28°/A05 50 0 100 Q [m³/h] 200 300 400 500 600 1311.45/11-EN KGP.454/5W/0 100 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 200-200-250, n = 1450 rpm 0 1000 0 20 1000 20 30 Qmin 40 2000 Q [US.gpm] 3000 2000 Q [IM.gpm] η [%] 50 60 60 70 20 80 30 84 40 50 15 H [ft] 85.2 60 20 H [m] 30 84 80 70 40 50 60 10 20 Qmax 40 80 80.7 80 ø260/A01 70 77.9 30 40 ø247/240/6°/A05 50 ø239/223/215/14°/A06 60 66.3 20 ø231/200/215/27°/A06 5 0 0 100 Q [m³/h] 200 50 300 Q [l/s] 400 500 100 600 700 150 200 ø239/223/215/14°/A06 NPSH ø247/240/6°/A05 ø231/200/215/27°/A06 6 20 ø260/A01 [m] 3% NPSH [ft] 3% 4 10 30 40 ø260/A01 P [hp] 25 ø247/240/6°/A05 30 20 ø239/223/215/14°/A06 P [kW] 15 20 ø231/200/215/27°/A06 10 0 100 Q [m³/h] 200 300 400 500 600 700 1311.45/11-EN KGP.454/60/1 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 101 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 250-200-275, n = 1450 rpm 0 25 1000 0 Q [US.gpm] 1000 2000 3000 4000 2000 Q [IM.gpm] 3000 80 30 Qmin 40 50 60 70 η [%] 80 20 30 40 50 30 40 50 60 60 60 85 70 85.5 80 70 85 80 H [ft] 84.6 15 83.3 80 H [m] 80 10 70 70 5 15 40 Qmax 80 0 200 0 50 Q [m³/h] Q [l/s] 400 100 600 150 70 ø280/A01 ø280/257/280/20°/A08 20 ø280/247/270/20°/A08 800 200 1000 250 ø280/A01 NPSH [m] 40 3% 10 NPSH [ft] ø280/257/280/20°/A08 3% ø280/247/270/20°/A08 20 5 35 ø280/A01 30 40 P [kW] P [hp] ø280/257/280/20°/A08 25 ø280/247/270/20°/A08 30 20 0 200 Q [m³/h] 400 600 800 1000 1311.45/11-EN KGP.454/6T/0 102 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 250-200-320, n = 1450 rpm 0 40 1000 Q [US.gpm] 0 1000 30 40 2000 Q [IM.gpm] 3000 4000 2000 3000 4000 η [%] 50 60 Qmin 70 80 100 85 30 86.5 30 40 H [m] 50 60 70 85 80 30 20 40 50 60 H [ft] Qmax 83.7 80 70 80 80 70 82.0 50 80 70 ø325/A01 60 10 ø280/256/270/20°/A06 ø304/287/16°/A05 0 200 0 Q [m³/h] 400 600 Q [l/s] 100 800 1000 200 300 ø325/A01 50 10 ø304/287/16°/A05 NPSH NPSH [m] [ft] 3% ø280/256/270/20°/A06 3% 0 0 60 ø325/A0180 P [hp] P [kW] 60 40 ø304/287/16°/A05 40 ø280/256/270/20°/A06 20 0 200 Q [m³/h] 400 600 800 1000 1311.45/11-EN KGP.454/6V/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 103 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 250-200-375, n = 1450 rpm 0 1000 0 50 1000 30 40 50 2000 Q [US.gpm] 3000 4000 2000 Q [IM.gpm] 3000 Qmin 60 η [%] 70 80 150 85 86.7 30 40 40 50 60 70 80 85 85 H [m] H [ft] Qmax 85.6 80 85 30 40 50 60 70 30 100 80 80 81.0 ø373/A01 80 20 ø356/343/14°/A05 70 ø334/305/30°/A05 0 200 0 50 Q [m³/h] Q [l/s] 400 100 600 150 800 200 1000 250 ø373/A01 50 10 ø356/343/14°/A05 NPSH [ft] 3% NPSH [m] ø334/305/30°/A05 3% 0 0 100 ø373/A01 80 100 ø356/343/14°/A05 60 P [hp] ø334/305/30°/A05 P [kW] 40 50 20 0 200 Q [m³/h] 400 600 800 1000 1311.45/11-EN KGP.454/6W/0 104 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 250-200-435 , n = 1450 rpm 0 70 1000 0 1000 30 40 2000 Q [US.gpm] Qmin 60 Q [IM.gpm] 70 3000 4000 2000 3000 80 η [%] 200 60 30 40 30 60 40 70 85.0 80 H [ft] 60 70 60 70 50 85.6 80 30 40 80 Qmax 150 84.0 80 80 83.1 40 ø433/A01 80 H [m] ø427/405/28°/A05 80 100 30 70 ø405/383.5/28°/A05 ø386/364/28°/A05 20 0 200 0 50 Q [m³/h] Q [l/s] 400 100 600 150 800 200 250 ø433/A01 35 10 NPSH 1000 NPSH [ft] 3% ø427/405/28°/A05 ø405/383.5/28°/A05 20 ø386/364/28°/A05 [m] 3% 5 5 150 200 ø433/A01 P [kW] ø427/405/28°/A05 P [hp] 100 ø405/383.5/28°/A05 ø386/364/28°/A05 100 50 0 200 Q [m³/h] 400 600 800 1000 1311.45/11-EN KGP.454/6X/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 105 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 250-200-510 , n = 1450 rpm 0 100 1000 0 1000 30 2000 Q [US.gpm] 50 60 70 4000 2000 Q [IM.gpm] Qmin 40 3000 80 3000 η [%] 300 83.7 30 40 50 80 60 70 Qmax 80 30 H [m] 40 50 60 H [ft] 83.2 ø508/A01 70 80 80 82.8 60 30 40 50 60 70 200 ø490/472/28°/A05 80 80 81.2 ø457/438/28°/A05 80 40 ø410/390/A05 100 0 200 0 50 Q [m³/h] Q [l/s] 400 100 600 150 800 200 250 ø508/A01 10 NPSH [m] ø490/472/28°/A05 20 ø457/438/28°/A05 ø410/390/A05 NPSH 3% 5 [ft] 3% 0 0 ø508/A01 200 ø490/472/28°/A05 150 P [kW] 200 ø457/438/28°/A05 P [hp] 100 ø410/390/A05 100 50 0 200 Q [m³/h] 400 600 800 1311.45/11-EN KGP.454/6Y/0 106 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 300-250-295, n = 1450 rpm 0 2000 0 1000 Q [IM.gpm] 4000 Q [US.gpm] 2000 3000 4000 100 30 30 Qmin 40 30 H [m] η [%] 50 40 60 50 60 70 H [ft] 70 30 20 40 75 75 50 78.9 60 70 79.0 75 50 75 77.8 75 Qmax ø322/A01 75 10 70 ø322/299/322/15°/A06 ø302/269/302/20°/A08 0 10 NPSH 0 200 Q [m³/h] 400 100 600 Q [l/s] 800 1000 200 1200 300 ø322/A0130 ø322/299/322/15°/A06 NPSH [ft] [m] 3% 3% ø302/269/302/20°/A08 20 5 10 60 80 P [kW] ø322/A01 P [hp] 50 ø322/299/322/15°/A06 60 40 ø302/269/302/20°/A08 0 200 Q [m³/h] 400 600 800 1000 1200 1311.45/11-EN KGP.454/7H/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 107 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 300-250-295.1 , n = 1450 rpm 0 1000 Q [US.gpm] 0 1000 2000 3000 4000 2000 Q [IM.gpm] 3000 4000 100 30 30 40 η [%] 50 H [m] 30 Qmin 40 60 50 30 20 30 40 75 70 50 40 H [ft] 70 60 60 75 70 50 77.4 60 75 50 78.0 70 75 75 77.8 76.2 10 75 75 75 70 0 200 0 Q [m³/h] 400 600 Q [l/s] 100 800 [m] ø313/297/313/10°/A06 ø303/269/303/15°/A08 ø303/245/303/15°/A08 1000 300 ø303/245/303/15°/A08 3% ø322/A01 200 6 NPSH 70 Qmax 20 ø303/269/303/15°/A08 ø313/297/313/10°/A06 ø322/A01 NPSH [ft] 3% 4 10 2 60 ø322/A01 40 P [hp] P [kW] ø313/297/313/10°/A06 30 40 ø303/269/303/15°/A08 ø303/245/303/15°/A08 20 0 200 Q [m³/h] 400 600 800 1000 1311.45/11-EN KGP.454/7J/0 108 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 300-250-320 , n = 1450 rpm 0 2000 0 1000 Q [IM.gpm] 2000 30 40 4000 Q [US.gpm] 6000 3000 4000 5000 Qmin 50 60 30 100 η [%] 70 80 H [m] 30 40 30 40 50 50 85 60 70 60 70 85.7 80 H [ft] 85 80 20 84.1 85 85.3 85 80 Qmax 80 80 50 70 70 ø327/A01 10 ø320/304/320/12.5°/A08 ø318/290/318/20°/A08 0 0 200 Q [m³/h] 400 100 600 Q [l/s] 800 1000 200 1200 300 1400 400 ø327/A01 40 10 NPSH NPSH [ft] 3% ø318/290/318/20°/A08 ø320/304/320/12.5°/A08 [m] 3% 20 5 100 ø327/A01 70 P [hp] 60 80 ø320/304/320/12.5°/A08 P [kW] 50 ø318/290/318/20°/A08 60 40 0 200 Q [m³/h] 400 600 800 1000 1200 1400 1311.45/11-EN KGP.454/7K/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 109 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 300-250-375, n = 1450 rpm 0 50 2000 0 2000 30 40 Qmin 50 4000 Q [US.gpm] 6000 4000 Q [IM.gpm] η [%] 60 150 70 80 40 85 H [ft] 85.4 30 40 50 60 85 70 80 30 30 40 60 H [m] 100 80 Qmax 84.2 50 70 80 80 81.9 ø373/A01 80 20 70 70 ø354/334/16°/A05 50 ø326/299/314/20°/A06 10 0 20 NPSH 0 200 Q [m³/h] 400 100 600 Q [l/s] 800 1000 200 1200 300 1400 400 ø373/A01 50 [m] 3% 10 ø354/334/16°/A05 NPSH [ft] 3% ø326/299/314/20°/A06 0 0 120 ø373/A01 150 100 P [hp] ø354/334/16°/A05 80 100 P [kW] 60 ø326/299/314/20°/A06 40 50 0 200 Q [m³/h] 400 600 800 1000 1200 1400 1311.45/11-EN KGP.454/7M/0 110 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 300-250-435 , n = 1450 rpm 0 2000 0 4000 Q [US.gpm] 1000 Q [IM.gpm] 2000 6000 3000 4000 5000 70 30 40 50 60 η [%] Qmin 70 80 85 200 60 88.2 30 40 50 60 70 80 85 85 87.8 H [m] 30 40 50 60 H [ft] Qmax 50 150 80 85 70 80 40 80 ø433/A01 84.6 ø414/399/14°/A05 80 30 100 ø413/354/316/30°/A08 0 0 NPSH 200 Q [m³/h] 400 100 600 Q [l/s] 800 1000 200 1200 300 1400 400 20 ø433/A01 [m] 50 3% ø414/399/14°/A05 10 ø413/354/316/30°/A08 0 NPSH [ft] 3% 0 ø433/A01 200 ø414/399/14°/A05 150 200 P [kW] P [hp] ø413/354/316/30°/A08 100 100 50 0 200 Q [m³/h] 400 600 800 1000 1200 1400 1311.45/11-EN KGP.454/7N/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 111 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 300-250-510, n = 1450 rpm 0 2000 0 2000 30 40 50 60 4000 Q [US.gpm] 70 6000 4000 Q [IM.gpm] Qmin 300 80 84 η [%] 80 86.9 30 40 50 60 H [ft] 70 Qmax 80 84 H [m] 84 85.1 30 40 50 60 ø508/A01 70 80 60 200 84 84 85.1 84 ø485/460/28°/A05 80 ø450/424/28°/A05 40 0 0 200 Q [m³/h] 400 100 600 Q [l/s] 800 1000 200 1200 1400 300 400 ø508/A01 35 10 NPSH NPSH [ft] 3% [m] 3% ø485/460/28°/A05 20 5 ø450/424/28°/A05 5 300 ø508/A01 400 P [kW] P [hp] ø485/460/28°/A05 200 ø450/424/28°/A05 200 100 0 200 Q [m³/h] 400 600 800 1000 1200 1400 1311.45/11-EN KGP.454/7P/0 112 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 350-300-350, n = 1450 rpm 0 2000 Q [US.gpm] 0 2000 4000 6000 8000 4000 Q [IM.gpm] 6000 8000 40 30 30 40 40 Qmin 50 η [%] 60 50 70 60 70 30 30 40 50 100 80 80 60 H [m] 70 83.8 80 20 83.8 H [ft] 83.2 80 80 Qmax 50 ø375/A01 80 70 10 ø375/348/375/15°/A06 ø352/313/352/20°/A08 0 16 NPSH 500 0 Q [m³/h] 200 1000 Q [l/s] 1500 2000 400 600 ø375/348/375/15°/A06 ø375/A01 40 [m] 3% 10 NPSH [ft] 3% ø352/313/352/20°/A08 20 2 120 150 ø375/A01 100 ø375/348/375/15°/A06 P [hp] P [kW] 80 100 ø352/313/352/20°/A08 60 0 500 Q [m³/h] 1000 1500 2000 1311.45/11-EN KGP.454/7T/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 113 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 350-300-350.1 , n = 1450 rpm 0 2000 0 2000 40 4000 Q [US.gpm] 6000 8000 4000 Q [IM.gpm] 6000 150 30 40 50 30 30 30 30 H [m] H [ft] Qmin η [%] 60 40 50 70 60 100 70 40 40 50 80 60 50 80 70 60 70 80.8 81.9 80 20 80 81.4 79.5 Qmax 80 80 50 ø375/A01 70 10 70 70 ø364/345/364/10°/A06 ø352/285/252/15°/A08 0 200 0 400 100 Q [m³/h] 600 Q [l/s] 800 1000 200 1200 300 1400 1800 500 ø375/A01 35 ø364/345/364/10°/A06 NPSH [ft] 3% ø352/313/352/15°/A08 ø352/285/252/15°/A08 [m] 1600 400 10 NPSH ø352/313/352/15°/A08 3% 20 5 10 150 100 ø375/A01 P [hp] P [kW] 80 ø364/345/364/10°/A06 100 60 ø352/313/352/15°/A08 ø352/285/252/15°/A08 0 200 400 Q [m³/h] 600 800 1000 1200 1400 1600 1800 1311.45/11-EN KGP.454/7U/0 114 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 350-300-375, n = 1450 rpm 0 2000 Q [US.gpm] 4000 0 2000 30 40 50 40 Q [IM.gpm] 6000 8000 4000 10000 6000 8000 150 Qmin 60 70 H [ft] 80 30 40 50 30 40 50 η [%] 85 60 60 30 70 80 70 87.3 85 100 80 87.1 85 85 86.7 H [m] 85 85 Qmax 80 80 20 80 70 70 10 0 15 500 0 Q [m³/h] 200 1000 Q [l/s] 1500 70 ø380/A01 50 ø380/352/380/20°/A08 ø365/333/365/20°/A08 2000 400 2500 600 ø380/A01 NPSH [m] 40 3% ø365/333/365/20°/A08 10 ø380/352/380/20°/A08NPSH [ft] 3% 20 160 200 ø380/A01 140 P [hp] 120 ø380/352/380/20°/A08 150 P [kW] ø365/333/365/20°/A08 100 80 0 500 Q [m³/h] 1000 1500 2000 2500 1311.45/11-EN KGP.454/7V/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 115 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 350-300-435 , n = 1450 rpm 0 2000 Q [US.gpm] 4000 0 2000 30 40 50 60 60 6000 4000 Q [IM.gpm] Qmin 70 8000 10000 6000 8000 η [%] 200 80 85 89.0 H [m] 30 40 50 60 H [ft] 70 80 85 85 40 30 40 88.5 50 60 Qmax 80 70 80 85 85 87.6 ø434/A01100 80 85 80 70 ø406/383/16°/A05 ø373/343/360/20°/A06 20 0 500 0 Q [m³/h] 200 1000 Q [l/s] 1500 2000 400 600 ø434/A01 40 ø406/383/16°/A05 10 NPSH ø373/343/360/20°/A06 NPSH 3% [ft] [m] 3% 20 5 ø434/A01 250 300 200 P [hp] P [kW] ø406/383/16°/A05 150 200 ø373/343/360/20°/A06 100 100 0 500 Q [m³/h] 1000 1500 2000 1311.45/11-EN KGP.454/7X/0 116 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 350-300-510 , n = 1450 rpm 0 2000 Q [US.gpm] 4000 0 2000 30 40 50 6000 8000 4000 Q [IM.gpm] 10000 6000 8000 300 60 70 Qmin 80 η [%] 85 80 86.7 30 40 50 60 H [ft] 70 Qmax 80 85 H [m] 85 85.6 30 60 40 50 60 80 200 85 70 80 80 70 82.3 ø508/A01 80 ø482/464.5/14°/A05 40 70 100 ø452/412/30°/A05 0 500 0 Q [m³/h] 200 1000 Q [l/s] 1500 2000 400 600 ø508/A01 100 20 ø482/464.5/14°/A05 NPSH [ft] 3% NPSH [m] ø452/412/30°/A05 3% 0 0 600 ø508/A01 400 P [hp] ø482/464.5/14°/A05 300 400 P [kW] ø452/412/30°/A05 200 200 100 0 500 Q [m³/h] 1000 1500 2000 1311.45/11-EN KGP.454/7Y/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 117 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-RSY 125-500.2, n = 1450 rpm 0 500 1000 Q [US.gpm] 0 500 1500 1000 Q [IM.gpm] 100 50 60 50 80 60 50 72 73 72 73.5 72 60 65 73 73 65 70 70 72 70 70 65 70 70.7 60 65 65 60 60 65 70 40 200 65 71.6 H [m] H [ft] 72 72 72.5 70 60 74.0 73 65 70 50 300 η [%] 70 65 70 50 60 65 60 50 60 60 50 50 50 ø405 ø380 50 100 ø340 20 ø300 ø260 0 50 Q [m³/h] 100 0 20 150 Q [l/s] 200 40 250 60 300 350 80 100 20 5 NPSH NPSH [ft] [m] R R 0 0 80 ø405 100 ø380 60 P [hp] ø340 P [kW] ø300 40 50 ø260 20 0 50 Q [m³/h] 100 150 200 250 300 350 K34557/1 Impeller material EN-GJL-250 CC480K-GS 1.4408 118 Correction coefficient S [m] 0,5 0,5 0,5 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Calculation NPSHavailable ≥ NPSH + correction coefficient S 1311.45/11-EN Table 3: Correction coefficients Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-RSY 150-500.1, n = 1450 rpm 0 1000 0 500 Q [IM.gpm] 50 60 65 70 60 65 70 65 70 65 70 60 65 70 60 65 2000 Q [US.gpm] 1000 1500 2000 300 50 80 50 H [m] 50 50 60 50 60 60 75 75 78 78 η [%] 80 81.1 80 78 H [ft] 80 80.9 75 78 80 78 79.8 75 75 78 70 75 75 77.5 77.9 75 78 78.8 75 70 75 75 ø500 ø480 70 75 70 70 40 200 70 78 ø460 70 65 ø440 ø420 ø410 65 100 0 100 Q [m³/h] 200 0 300 Q [l/s] 50 400 500 100 600 150 20 6 NPSH [m] R NPSH [ft] R 4 10 2 150 200 ø500 P [kW] ø480 P [hp] ø460 100 ø440 ø420 ø410 100 50 0 100 Q [m³/h] 200 300 400 500 600 K34560/0 1311.45/11-EN Table 4: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 Correction coefficient S [m] 0,5 0,5 0,5 Calculation NPSHavailable ≥ NPSH + correction coefficient S Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 119 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-RSY 200-330, n = 1450 rpm 0 1000 0 1000 55 60 30 55 60 55 60 20 3000 65 65 70 75 3000 η [%] 80 84.5 70 75 100 86.0 80 84.5 70 84.5 85.2 75 84.5 80 65 4000 2000 Q [IM.gpm] 55 60 65 H [m] 2000 Q [US.gpm] H [ft] 80 82.9 70 80 75 ø330 80 75 78.9 75 50 ø310 70 75 70 10 65 ø290 ø270 0 200 0 50 Q [m³/h] Q [l/s] 400 100 600 150 800 1000 200 250 30 ø330 8 NPSH NPSH [ft] R [m] R 20 6 4 10 ø330 60 80 P [hp] P [kW] ø310 60 40 ø290 40 ø270 20 0 200 Q [m³/h] 400 600 800 1000 K34904/0 Impeller material EN-GJL-250 CC480K-GS 1.4408 120 Correction coefficient S [m] 0,5 0,5 0,5 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Calculation NPSHavailable ≥ NPSH + correction coefficient S 1311.45/11-EN Table 5: Correction coefficients Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-RSY 200-400, n = 1450 rpm 0 1000 0 Q [US.gpm] 1000 2000 3000 4000 2000 Q [IM.gpm] 3000 η [%] 80.5 50 84.8 85.5 80.5 150 84.8 84.8 85.6 80.5 80.5 40 84.8 H [ft] 84.3 H [m] 80.5 80.5 ø405 84.7 80.5 100 30 ø380 80.5 ø360 20 ø340 0 120 0 200 50 Q [m³/h] Q [l/s] 400 100 600 150 800 200 250 ø405 150 100 P [hp] ø380 80 100 P [kW] ø360 60 ø340 40 50 0 200 Q [m³/h] 400 600 800 K34685/1 1311.45/11-EN Table 6: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 Correction coefficient S [m] 1,6 1,0 0,5 Calculation NPSHavailable ≥ NPSH + correction coefficient S Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 121 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-RSY 200-500, n = 1450 rpm 0 100 1000 0 1000 60 70 70 60 70 80 60 3000 70 74.5 78 74.5 74.5 4000 2000 Q [IM.gpm] 60 H [m] 2000 Q [US.gpm] 80 78 3000 82.9 80 82 81.5 78 300 η [%] 82 80 78 78 60 70 60 74.5 74.5 78 77.6 70 60 78 80 79.2 74.5 H [ft] 80 80 81.4 74.5 78 70 74.5 74.5 75.1 74.5 74.5 70 74.5 70 70 70 70 200 ø510 ø500 ø480 ø460 40 ø440 ø420 0 200 0 50 Q [m³/h] Q [l/s] 400 100 600 800 150 200 250 35 10 NPSH [ft] NPSH R [m] R 20 5 5 200 ø510 ø500 ø480 150 200 ø460 P [kW] ø440 P [hp] 100 ø420 100 50 0 200 Q [m³/h] 400 600 800 K34579/0 Impeller material EN-GJL-250 CC480K-GS 1.4408 122 Correction coefficient S [m] 1,8 1,0 0,5 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Calculation NPSHavailable ≥ NPSH + correction coefficient S 1311.45/11-EN Table 7: Correction coefficients Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-RSY 250-300, n = 1450 rpm 30 0 2000 0 1000 Q [IM.gpm] 4000 Q [US.gpm] 2000 6000 3000 4000 5000 η [%] 60 20 70 75 60 H [m] 60 70 80 75 70 50 82 84 80 84.5 75 81.9 10 84 82 78.9 75 70 70 0 200 Q [m³/h] 400 0 600 Q [l/s] 100 800 H [ft] 70 75 75 0 80 80 1000 200 ø313/285/23°/A05 ø291/260/258/23°/A06 ø279/245/258/23°/A06 0 1200 1400 300 35 10 NPSH [ft] NPSH R [m] R 20 5 10 60 40 P [hp] P [kW] 30 ø313/285/23°/A05 40 ø291/260/258/23°/A06 20 ø279/245/258/23°/A06 0 200 Q [m³/h] 400 600 800 1000 1200 20 1400 K34582/0 1311.45/11-EN Table 8: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 Correction coefficient S [m] 2,7 1,5 0,5 Calculation NPSHavailable ≥ NPSH + correction coefficient S Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 123 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-RSY 250-330, n = 1450 rpm 0 2000 0 1000 Q [IM.gpm] 4000 Q [US.gpm] 2000 3000 4000 35 60 70 75 80 30 η [%] 83 100 86 60 70 89.1 75 80 25 60 H [m] 83.4 75 83 83 80.7 H [ft] 80 80 20 80 86 83 70 80 ø330 80 15 ø310 75 40 ø290 0 200 Q [m³/h] 0 400 600 Q [l/s] 100 800 1000 200 60 1200 300 35 10 NPSH [ft] NPSH R [m] R 20 5 10 80 ø330 100 P [kW] P [hp] ø310 60 80 ø290 60 40 0 200 Q [m³/h] 400 600 800 1000 1200 K34586/0 Impeller material EN-GJL-250 CC480K-GS 1.4408 124 Correction coefficient S [m] 2,0 1,0 0,5 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Calculation NPSHavailable ≥ NPSH + correction coefficient S 1311.45/11-EN Table 9: Correction coefficients Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-RSY 250-400, n = 1450 rpm 0 2000 0 1000 Q [IM.gpm] 2000 60 70 40 60 60 70 70 70 6000 3000 75 50 60 4000 Q [US.gpm] 79.5 4000 5000 η [%] 83 85 150 86.0 75 79.5 85 83 83 85 75 79.5 85.5 83 79.5 83 79.5 80.2 79.5 H [m] 75 83 84.7 75 30 100 70 75 79.5 70 75 20 H [ft] 79.5 85 70 75 ø405 ø380 ø360 50 ø340 10 0 200 Q [m³/h] 400 0 600 Q [l/s] 100 800 1000 200 1200 1400 300 35 10 NPSH [ft] NPSH R [m] R 20 5 10 150 200 ø405 P [kW] P [hp] 100 ø380 100 ø360 ø340 50 0 200 Q [m³/h] 400 600 800 1000 1200 1400 K34590/0 1311.45/11-EN Table 10: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 Correction coefficient S [m] 2,8 1,8 0,5 Calculation NPSHavailable ≥ NPSH + correction coefficient S Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 125 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-RSY 250-500, n = 1450 rpm 0 100 2000 0 2000 60 60 80 65 65 60 65 60 65 H [m] 60 4000 Q [US.gpm] 4000 Q [IM.gpm] 300 70 η [%] 75 80 70 70 70 82.5 75 75 80 80 84.5 82.5 70 60 H [ft] 85.5 84.5 82.5 85.3 84.5 84.5 75 80 65 6000 82.5 75 80 84.5 85.3 83.5 82.5 84.5 85.0 82.5 80 82.5 84.5 80 82.5 82.5 80 84.5 200 75 75 80 ø520 75 82.5 80 40 ø500 75 75 ø440 ø480 ø460 100 0 200 Q [m³/h] 400 0 100 600 Q [l/s] 800 1000 200 1200 1400 300 400 8 NPSH [m] R 20 6 NPSH [ft] R 4 10 300 400 ø520 P [kW] ø500 200 P [hp] ø480 ø460 200 ø440 100 0 200 Q [m³/h] 400 600 800 1000 1200 1400 K34594/0 Impeller material EN-GJL-250 CC480K-GS 1.4408 126 Correction coefficient S [m] 1,8 1,0 0,5 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Calculation NPSHavailable ≥ NPSH + correction coefficient S 1311.45/11-EN Table 11: Correction coefficients Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-RSY 300-360, n = 1450 rpm 0 2000 0 4000 Q [US.gpm] 2000 6000 8000 4000 Q [IM.gpm] 6000 40 60 70 η [%] 75 80 60 70 83 86 75 88 80 30 100 83 88.6 60 86 70 H [m] 88 86.8 75 86 86 80 81.4 20 H [ft] 83 83 80 80 80 75 75 70 70 50 ø360 ø340 ø320 10 0 0 200Q [m³/h]400 100 600 Q [l/s] 800 1000 200 1200 300 1400 1600 400 1800 2000 500 90 NPSH [ft] 20 NPSH R [m] 50 R 10 10 120 150 ø360 100 P [hp] ø340 80 100 ø320 P [kW] 60 40 0 200Q [m³/h]400 600 800 1000 1200 1400 1600 1800 2000 K34601/0 1311.45/11-EN Table 12: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 Correction coefficient S [m] 1,6 1,0 0,5 Calculation NPSHavailable ≥ NPSH + correction coefficient S Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 127 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-RSY 300-400, n = 1450 rpm 0 2000 0 4000 Q [US.gpm] 2000 60 60 50 60 75 70 70 6000 200 70 70 8000 4000 Q [IM.gpm] 60 60 6000 75 75 79 79 η [%] 81.5 84 81.5 85.5 79 85.5 84.6 81.5 84 84 84 75 79 60 H [ft] 86.1 84 81.5 81.5 79 70 40 75 84 83.8 79 H [m] 150 79 81.5 85.1 75 75 81.5 81.5 79 81.5 82.1 30 79 100 ø400 79 81.5 ø430 ø420 ø380 20 0 0 200Q [m³/h]400 100 600 Q [l/s] 800 1000 200 1200 300 1400 1600 400 1800 500 10 NPSH 30 [m] R 8 NPSH [ft] R 20 6 ø430 ø420 300 200 P [hp] ø400 P [kW] 200 ø380 100 ø360 100 0 200Q [m³/h]400 600 800 1000 1200 1400 1600 1800 K34605/0 Impeller material EN-GJL-250 CC480K-GS 1.4408 128 Correction coefficient S [m] 1,5 1,0 0,5 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Calculation NPSHavailable ≥ NPSH + correction coefficient S 1311.45/11-EN Table 13: Correction coefficients Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-RSY 300-500, n = 1450 rpm 0 100 2000 0 Q [US.gpm] 2000 60 70 75 70 75 60 70 80 H [m] 6000 70 60 70 75 80 83 80 80 86 84.5 86.3 86 84.5 86 86.1 86 83 84.5 86 83 83.7 80 83 0 200Q [m³/h]400 100 600 Q [l/s] 800 200 1000 1200 300 75 1400 ø520 ø510 ø490 75 ø450 200 75 75 80 80 40 80 83 84.5 83 80 84.5 84.8 80 0 83 83 84.5 60 H [ft] 84.5 86.4 80 75 300 η [%] 84.5 83 83 6000 86 75 8000 4000 Q [IM.gpm] 60 60 4000 ø470 1600 400 1800 500 35 10 NPSH [m] R NPSH [ft] R 8 20 6 400 ø520 ø510 300 400 ø490 P [kW] ø470 200 P [hp] ø450 200 100 0 200Q [m³/h]400 600 800 1000 1200 1400 1600 1800 K34609/0 1311.45/11-EN Table 14: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 Correction coefficient S [m] 3,2 1,5 0,5 Calculation NPSHavailable ≥ NPSH + correction coefficient S Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 129 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump n = 960 rpm Etanorm 040-025-160, n = 960 rpm Etanorm SYT, Etabloc 0 0 5 2 4 Q [IM.gpm] 4.8 Qmin 10 Q [US.gpm] 6 8 10 15 15 20 25 η [%] 30 4 15 20 15 3 25 20 H [ft] 31.8 30 15 12 30.3 25 30 30 10 28.6 20 25 27.1 25 15 ø169 25 20 25 2 ø165 24.6 ø155 H [m] 5 ø145 20 ø135 1 0.0 0.5 0.0 Q [m³/h] 1.0 0.2 Q [l/s] 1.5 2.0 0.4 2.5 0.6 3.0 0.8 6 ø169 15 4 NPSH [ft] 2 R NPSH [m] ø135 R 0 0 0.08 ø169 0.10 ø165 0.06 ø155 P [hp] ø145 0.04 0.05 ø135 P [kW] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,970 P: 1,031 0.02 0.0 0.5 Q [m³/h] 1.0 1.5 2.0 2.5 3.0 K1311.456/14/2 130 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 1311.45/11-EN 0.01 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 040-025-200, n = 960 rpm Etanorm SYT, Etabloc 0 0 5 2 7 Q [IM.gpm] 4 Qmin 6 10 Q [US.gpm] 6 15 20 15 20 15 8 10 12 25 η [%] 15 25 20 H [ft] 28.7 25 5 20 30.9 ø209 15 26.4 15 20 ø205 4 25 23.4 15 20 ø195 20.7 3 10 20 ø180 H [m] ø165 2 0.0 0.5 0.0 Q [m³/h] 1.0 0.2 Q [l/s] 1.5 2.0 0.4 2.5 0.6 3.0 3.5 0.8 1.0 3 ø209 ø165 8 2 NPSH [ft] R NPSH [m] R 0 0 0.17 ø209 0.15 0.20 ø205 P [hp] ø195 0.15 0.10 ø180 ø165 P [kW] 0.10 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,920 P: 1,087 0.05 0.0 0.5 Q [m³/h] 1.0 1.5 2.0 2.5 3.0 3.5 1311.45/11-EN K1311.456/15/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 131 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-125.1, n = 960 rpm Etanorm SYT, Etabloc 0 10 0 10 Qmin 20 Q [US.gpm] 30 20 Q [IM.gpm] 40 50 40 55 60 50 2.5 30 η [%] 55 60 8 62.1 61.8 40 50 H [ft] 55 60 2.0 60 60 H [m] 40 6 60.5 60 50 ø139 ø134 55 58.1 1.5 40 55 50 55 ø124 55 56.3 55 4 ø114 1.0 ø104 0 0.0 2 Q [m³/h] Q [l/s] 0.5 4 1.0 6 1.5 8 2.0 2.5 1.0 NPSH ø139 [m] R 2 0.5 ø104 ø114 NPSH [ft] R 0.0 0 0.10 ø139 ø134 0.06 P [hp] P [kW] ø124 0.04 0.05 ø114 ø104 0.02 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,982 P: 1,018 0 2 Q [m³/h] 4 6 8 1311.45/11-EN K1311.456/17/2 132 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-160.1, n = 960 rpm Etanorm SYT, Etabloc 0 10 0 10 Qmin 30 20 Q [US.gpm] 30 20 Q [IM.gpm] 40 30 45 4 η [%] 50 30 40 51.5 H [m] 30 50 44.9 10 3 39.0 30 36.3 40 ø170 H [ft] ø162 2 ø150 5 ø135 0 0.0 2 1 Q [m³/h] 2 0.5 3 Q [l/s] 4 5 1.0 6 7 1.5 8 2.0 ø170 NPSH 5 [m] R 1 NPSH [ft] ø135 R 0 0 0.12 ø170 0.15 ø162 0.10 P [hp] ø150 0.08 0.10 ø135 0.06 P [kW] 0.04 0.05 0.02 0 1 Q [m³/h] 2 3 4 5 6 7 8 1311.45/11-EN K1311.456/18/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 133 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-200.1, n = 960 rpm Etanorm SYT, Etabloc 0 10 20 Q [US.gpm] 0 10 Qmin Q [IM.gpm] 35 30 20 30 40 45 6 20 η [%] 50 35 40 45 H [ft] 50.4 5 35 50 50 40 45 H [m] 35 4 15 ø204 50.7 48.4 50 40 45 ø193 47.3 ø180 10 3 ø168 0 0.0 1.6 2 Q [m³/h] Q [l/s] 0.5 4 1.0 6 1.5 8 2.0 2.5 ø168 NPSH ø204 [m] 4 R 1 NPSH [ft] R 2 0.2 0.3 ø204 0.20 P [hp] ø193 0.15 0.2 ø180 P [kW] ø168 0.10 0.1 0.05 0 2 Q [m³/h] 4 6 8 1311.45/11-EN K1311.456/19/2 134 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-250.1, n = 960 rpm Etabloc 0 10 0 10 20 Q [US.gpm] 10 Qmin 30 20 Q [IM.gpm] 25 30 25 30 40 30 35 η [%] 30 35 37.5 8 25 30 25 25 6 25 36.5 H [ft] 35 30 35.4 35 35 35 30 34.8 30 20 ø254 34.4 ø246 34.0 H [m] ø232 ø220 4 ø210 ø200 10 3 0 0.0 2 Q [m³/h] Q [l/s] 0.5 4 1.0 6 8 1.5 2.0 2.5 3.5 ø254 10 NPSH [m] R 2 NPSH [ft] R ø200 2 0.5 0.46 0.6 ø254 0.4 ø246 P [hp] ø232 0.3 0.4 ø220 ø210 0.2 ø200 P [kW] 0.2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,946 P: 1,057 0.1 0.06 0 2 Q [m³/h] 4 6 8 1311.45/11-EN K1311.456/20/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 135 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-125, n = 960 rpm Etabloc 0 20 0 10 20 Q [IM.gpm] Qmin 3.0 50 40 Q [US.gpm] 55 30 40 10 60 65 η [%] 50 55 68.0 60 2.5 8 65 65.6 50 55 2.0 H [ft] 65 60 65 ø139 64.8 H [m] 50 ø130 60 50 1.5 6 55 55 62.3 ø120 59.3 60 4 ø110 1.0 ø104 0 2 Q [m³/h] 0 4 6 Q [l/s] 1 8 10 2 12 3 ø139 0.4 1.4 NPSH [ft] R NPSH ø104 [m] 1 R 0.2 0.2 ø139 0.10 ø130 P [kW] 0.10 ø120 P [hp] 0.05 ø110 ø104 0.05 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,993 P: 1,007 0.00 0.00 0 2 Q [m³/h] 4 6 8 10 12 1311.45/11-EN K1311.456/21/2 136 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-160, n = 960 rpm Etanorm SYT, Etabloc 0 20 0 10 20 Q [IM.gpm] Qmin 40 40 Q [US.gpm] 60 30 40 50 15 50 55 60 η [%] 4 40 H [ft] 50 55 64.5 H [m] 60 40 60.9 50 55 3 10 60 60 40 58.1 50 ø174 55 40 ø162 56.1 50 55 2 ø150 54.4 ø141 5 ø132 0 4 2 0 Q [m³/h] 4 6 Q [l/s] 1 8 10 2 12 14 3 4 ø174 NPSH 10 [m] R ø132 2 NPSH [ft] R 2 ø174 0.15 0.2 ø162 P [kW] ø150 0.10 P [hp] ø141 ø132 0.1 0.05 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,985 P: 1,015 0 2 Q [m³/h] 4 6 8 10 12 14 1311.45/11-EN K1311.456/22/3 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 137 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-200, n = 960 rpm Etanorm SYT, Etabloc 0 20 0 10 Q [IM.gpm] 20 35 35 45 45 7 Qmin 40 Q [US.gpm] 40 40 30 50 50 40 55 40 45 50 55 6 35 60 55.9 η [%] 55.5 20 55 50 55 H [ft] 53.3 5 35 40 50 45 50 35 4 40 15 ø209 ø206 50 51.2 45 50 50 48.8 ø193 45 45 3 40 H [m] 10 ø180 ø170 2 0 2 Q [m³/h] 0 4 6 Q [l/s] 1 8 10 2 12 14 3 ø209 0.8 2.6 NPSH [ft] R 2 0.6 ø170 NPSH [m] R 0.4 1.2 0.36 ø209 ø206 0.3 0.4 ø193 P [hp] 0.2 ø180 P [kW] 0.2 ø170 0.1 0.02 0 2 Q [m³/h] 4 6 8 10 12 14 1311.45/11-EN K1311.456/23/1 138 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 050-032-250, n = 960 rpm Etanorm SYT, Etabloc 0 20 0 10 20 Q [IM.gpm] Qmin 40 Q [US.gpm] 60 30 35 40 50 40 45 10 η [%] 47.6 35 30 40 45 45 46.1 35 8 40 H [ft] 45 35 H [m] 44.1 40 ø261 43.6 35 6 40 20 40 ø246 40 42.9 40 40 4 ø232 ø220 ø205 0 2 Q [m³/h] 0 4 6 Q [l/s] 1 8 10 2 12 14 3 ø261 20 5 NPSH [ft] NPSH R [m] R ø205 0 0 0.6 0.8 ø261 P [kW] ø246 0.6 0.4 ø232 P [hp] ø220 0.4 ø205 0.2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,925 P: 1,081 0 2 Q [m³/h] 4 6 8 10 12 0.2 14 1311.45/11-EN K1311.456/24/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 139 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-040-125, n = 960 rpm Etabloc 0 20 0 20 60 50 60 65 80 40 Q [IM.gpm] 3.0 Qmin 40 Q [US.gpm] 60 70 75 2.5 50 η [%] 77.4 60 8 65 70 75 50 2.0 75 65 70 ø139 75 6 74.2 50 1.5 H [ft] 76.1 60 60 50 ø130 65 60 70 65 70.5 H [m] 67.1 ø120 70 4 ø110 1.0 ø104 0.8 0 2 Q [m³/h] 4 6 0 8 10 12 14 Q [l/s] 2 16 18 20 4 ø139 0.4 1.4 NPSH [ft] R ø104 NPSH [m] 1 R 0.2 0.2 0.05 0.15 0.2 ø139 P [hp] ø130 0.10 ø120 0.1 ø110 ø104 0.05 P [kW] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,946 P: 1,058 0.00 0.0 0 2 Q [m³/h] 4 6 8 10 12 14 16 18 20 1311.45/11-EN K1311.456/25/1 140 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-040-160, n = 960 rpm Etanorm SYT, Etabloc 0 5 20 Q [US.gpm] 0 20 Qmin 40 60 40 Q [IM.gpm] 56 80 63 100 60 80 68 15 71 η [%] 73.5 56 4 63 68 H [ft] 71 71 H [m] 73.1 56 63 68 71 3 ø174 71 10 72.1 ø160 71 56 63 68 2 ø147 68.9 68 5 ø128 0 1.0 5 0 Q [m³/h] 2 10 Q [l/s] 15 20 4 25 6 3 NPSH NPSH [ft] [m] R R 2 0.5 0.5 0.3 ø174 ø160 0.4 P [hp] 0.2 ø147 P [kW] 0.2 ø128 0.1 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,955 P: 1,047 0.0 0 5 Q [m³/h] 10 15 20 0.0 25 1311.45/11-EN K1311.456/26/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 141 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-040-200, n = 960 rpm Etanorm SYT, Etabloc 0 20 Q [US.gpm] 0 7 Qmin 40 20 Q [IM.gpm] 40 50 55 50 55 60 80 40 100 60 80 60 η [%] 40 6 40 50 65.1 20 60 63.6 55 H [ft] 60 40 5 61.4 55 60 40 4 60 50 50 15 60 59.2 55 55 55 57.1 40 55 50 H [m] 3 ø202 55 55 52.8 ø209 ø192 10 ø182 50 ø173 ø160 2.2 0 5 0 Q [m³/h] 2 10 Q [l/s] 15 20 4 6 1.5 4 1.0 NPSH [ft] R NPSH [m] R 2 0.5 0.5 ø209 0.6 0.4 P [hp] ø202 ø192 P [kW] 0.4 ø182 ø173 0.2 ø160 0.2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,960 P: 1,042 0.05 0 5 Q [m³/h] 10 15 20 1311.45/11-EN K1311.456/27/1 142 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-040-250, n = 960 rpm Etanorm SYT, Etabloc 0 20 40 Q [US.gpm] 0 20 60 40 Q [IM.gpm] Qmin 40 10 80 60 50 40 100 80 35 η [%] 50 57.1 40 56.8 50 H [ft] 8 40 56.2 50 50 55.2 6 40 ø260 ø252 50 20 50 50 52.2 H [m] ø235 50 4 40 40 ø218 2 5 ø195 0 5 0 Q [m³/h] 2 10 Q [l/s] 15 20 4 6 2 0.6 NPSH [m] R NPSH [ft] R 0.4 1 0.2 ø260 0.8 ø252 0.6 ø235 1.0 P [hp] P [kW] ø218 0.4 0.5 ø195 0.2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,988 P: 1,012 0 5 Q [m³/h] 10 15 20 1311.45/11-EN K1311.456/28/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 143 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-040-315, n = 960 rpm Etanorm SYT, Etabloc 0 20 Q [US.gpm] 0 20 Qmin 40 60 40 Q [IM.gpm] 30 35 30 35 80 60 80 40 η [%] 40 15 30 100 44.2 35 42.6 H [m] 39.7 40 40 40 30 35 36.0 10 35 35 30 35 ø326 ø318 H [ft] 32.7 ø300 30 30 20 ø280 5 ø260 0 5 0 Q [m³/h] 2 10 15 Q [l/s] 20 4 6 ø326 10 2 NPSH [ft] 3% NPSH [m] ø260 3% 0 0 ø326 1.5 ø318 P [kW] 2 ø300 P [hp] 1.0 ø280 1 ø260 0.5 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,942 P: 1,061 0 5 Q [m³/h] 10 15 20 1311.45/11-EN K1311.456/29/3 144 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-050-125, n = 960 rpm Etabloc 0 50 0 50 60 150 100 Q [IM.gpm] 3.0 Qmin 100 Q [US.gpm] 65 70 75 η [%] 2.5 8 60 65 70 79.4 75 2.0 60 65 70 75 77.3 60 65 70 1.5 6 70 75 75 75.5 75 72.3 H [ft] 65 70 70 4 65 65 1.0 ø142 70 ø130 60 60 ø120 H [m] ø112 2 0.5 0 5 0 Q [m³/h] 10 2 Q [l/s] 15 20 4 25 6 30 35 8 10 ø142 1.0 3.5 NPSH [ft] R NPSH [m] ø112 R 2 0.5 1 0.2 0.24 ø142 0.3 0.2 P [hp] ø130 P [kW] 0.2 ø120 ø112 0.1 0.1 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,992 P: 1,008 0.02 0 5 Q [m³/h] 10 15 20 25 30 35 1311.45/11-EN K1311.456/30/1 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 145 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-050-160, n = 960 rpm Etanorm SYT, Etabloc 0 50 0 50 150 100 Q [IM.gpm] 5 Qmin 50 100 Q [US.gpm] 60 150 70 15 75 η [%] 50 60 70 4 79.4 75 50 60 H [ft] 78.8 70 75 ø174 78.1 3 H [m] 50 60 50 60 10 75 70 75 ø162 75 76.9 70 73.3 ø150 75 2 70 ø135 5 ø128 1.2 0 5 0 Q [m³/h] 10 2 Q [l/s] 15 20 4 25 30 6 35 8 40 10 2.4 ø174 2 7 NPSH [ft] R ø128 NPSH [m] 5 R 1 1 0.2 0.5 ø174 0.6 0.4 ø162 0.4 ø150 P [hp] 0.2 ø135 ø128 0.2 P [kW] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,975 P: 1,026 0.0 0 5 Q [m³/h] 10 15 20 25 30 35 0.0 40 1311.45/11-EN K1311.456/31/1 146 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-050-200, n = 960 rpm Etanorm SYT, Etabloc 0 8 50 0 50 50 Qmin 100 Q [US.gpm] 150 100 Q [IM.gpm] 150 60 70 50 η [%] 73.7 60 70 6 50 60 H [m] 50 60 72.0 20 70 70 70 70.5 70 60 50 60 60 68.4 4 65.1 60 60 60 H [ft] ø219 ø206 ø193 10 ø180 ø170 2 0 10 0 Q [l/s] 2 Q [m³/h] 20 4 30 6 40 8 10 12 ø219 5 1 NPSH [ft] R NPSH [m] R ø170 0 0 ø219 0.8 1.0 ø206 0.6 P [hp] ø193 P [kW] ø180 0.4 0.5 ø170 0.2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,980 P: 1,021 0 10 Q [m³/h] 20 30 40 1311.45/11-EN K1311.456/32/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 147 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-050-250, n = 960 rpm Etanorm SYT, Etabloc 0 50 0 20 Q [IM.gpm] 40 11 Qmin 100 Q [US.gpm] 60 50 150 80 100 120 60 10 65 η [%] 50 60 30 67.7 65 50 8 66.2 60 H [m] ø260 H [ft] 64.8 50 ø246 60 6 20 ø232 62.0 ø215 4.5 0 5 0 Q [m³/h] 2 10 Q [l/s] 15 20 4 25 6 30 35 8 10 1.4 ø260 4 ø215 1.0 NPSH [ft] R NPSH [m] R 2 0.5 0.3 1.15 1.5 ø260 1.0 P [hp] ø246 0.8 1.0 ø232 0.6 ø215 0.4 0.5 P [kW] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,970 P: 1,031 0.2 0.1 0 5 Q [m³/h] 10 15 20 25 30 35 1311.45/11-EN K1311.456/33/1 148 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 065-050-315, n = 960 rpm Etanorm SYT, Etabloc 0 50 0 50 40 50 55 150 150 60 16 η [%] 65 40 14 50 200 100 Q [IM.gpm] 17 Qmin 100 Q [US.gpm] 50 65.7 55 40 50 12 H [ft] 65 60 63.3 55 40 60 40 ø323 60 62.1 50 55 60 10 ø303 58.9 30 H [m] ø285 55 8 ø265 7 0 0 10 2 Q [l/s] Q [m³/h] 20 4 30 6 40 8 10 12 3 ø323 8 2 NPSH [ft] NPSH [m] R ø323 R 0 0 2.6 ø323 3 2 P [hp] ø303 ø285 P [kW] 2 ø265 1 1 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,935 P: 1,070 0.2 0 10 Q [m³/h] 20 30 40 1311.45/11-EN K1311.456/34/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 149 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 080-065-125, n = 960 rpm Etabloc 0 50 Q [US.gpm] 0 50 150 50 60 200 100 Q [IM.gpm] 2.9 Qmin 100 70 150 75 η [%] 80 2.5 8 81.8 50 60 70 50 1.5 80 75 2.0 79.1 60 50 60 50 60 6 ø141/A01 70 75 H [ft] 75 70 76.4 75 ø130/A01 74.4 70 70.9 1.0 4 70 70 70 ø126/120/12°/A05 60 H [m] Ø141 - Ø130: Form/Type A01 Ø129 - Ø113: Form/Type A05 Ø112 - Ø109: Form/Type A06 0.5 0 10 ø125/114/22°/A05 2 ø123/109/100/28°/A06 Q [m³/h] 0 20 30 Q [l/s] 5 40 50 10 15 0.8 ø141/A01 2.6 NPSH [ft] R ø123/109/100/28°/A06 2 0.6 NPSH [m] R 1.4 0.4 0.34 ø141/A01 0.3 0.4 ø130/A01 P [hp] 0.2 ø126/120/12°/A05 P [kW] 0.2 ø125/114/22°/A05 ø123/109/100/28°/A06 0.1 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,974 P: 1,026 0.02 0 10 Q [m³/h] 20 30 40 50 1311.45/11-EN K1311.456/35/2 150 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 080-065-160, n = 960 rpm Etanorm SYT, Etabloc 0 50 0 Q [US.gpm] 50 50 150 60 70 200 100 Q [IM.gpm] 4.4 Qmin 100 250 150 200 76 4 η [%] 81.7 50 60 70 76 10 79.4 3 50 60 70 ø174 76 H [m] 77.4 50 76 60 70 ø159 75.7 2 H [ft] 76 ø145 5 ø132 1.2 0 10 Q [m³/h] 0 20 30 Q [l/s] 5 40 50 10 15 3.5 1.0 NPSH [ft] R NPSH [m] R 2 0.5 0.5 0.1 0.6 0.8 ø174 0.6 0.4 ø159 0.4 ø145 P [hp] 0.2 ø132 0.2 P [kW] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,979 P: 1,021 0.0 0 10 Q [m³/h] 20 30 40 0.0 50 1311.45/11-EN K1311.456/36/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 151 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 080-065-200, n = 960 rpm Etanorm SYT, Etabloc 0 8 50 Q [US.gpm] 0 Qmin 100 50 Q [IM.gpm] 50 60 150 200 100 70 250 150 200 74 η [%] 50 60 79.5 70 74 20 6 50 78.1 60 70 74 74 H [m] 50 50 76.9 60 70 74 4 50 74 ø219 70 60 74 60 75.0 74 76.6 70 ø206 70 74 73.1 H [ft] 74 70 ø193 70 70 10 ø180 ø175 ø165 2 0 10 Q [m³/h] 0 20 30 Q [l/s] 5 40 50 10 15 ø219 1.0 3.5 NPSH [ft] NPSH R [m] ø165 R 2 0.5 1 ø219 1.0 ø206 0.8 1.0 ø193 0.6 P [hp] ø180 P [kW] ø175 ø165 0.4 0.5 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,969 P: 1,032 0.2 0 10 Q [m³/h] 20 30 40 50 1311.45/11-EN K1311.456/37/2 152 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 080-065-250, n = 960 rpm Etanorm SYT, Etabloc 0 50 0 100 Q [US.gpm] 50 Q [IM.gpm] 11 Qmin 50 150 200 100 60 250 150 200 68 10 η [%] 74.6 50 60 68 30 73.9 50 60 68 8 68 71.1 H [m] 50 60 50 60 H [ft] 68 68 70.2 68 ø260 68 69.8 ø246 68 20 68 6 ø232 ø220 ø215 4.5 0 10 Q [m³/h] 0 20 30 Q [l/s] 5 40 50 10 60 15 1.4 4 1.0 NPSH [ft] R NPSH [m] R 2 0.5 0.3 1.8 ø260 1.5 2 ø246 P [hp] ø232 1.0 ø220 ø215 P [kW] 1 0.5 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,971 P: 1,030 0.1 0 10 Q [m³/h] 20 30 40 50 60 1311.45/11-EN K1311.456/38/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 153 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 080-065-315, n = 960 rpm Etanorm SYT, Etabloc 0 100 0 100 Qmin 50 15 60 50 60 η [%] 72.5 69 72.1 65 60 50 200 69 65 60 50 10 65 60 50 H [m] 300 Q [IM.gpm] 60 50 200 Q [US.gpm] 71.3 65 65 69 69 40 ø320 69 69 69 70.9 65 69 72.3 ø303 69 69 70.3 69 65 69 ø285 65 65 H [ft] 65 60 ø270 ø260 60 5 20 ø245 0 0 10 Q [m³/h] 20 5 30 Q [l/s] 40 50 10 60 70 15 20 ø320 4 ø245 1.0 NPSH [ft] R NPSH [m] R 2 0.5 ø320 3 4 ø303 P [hp] ø285 2 ø270 P [kW] 2 ø260 ø245 1 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,971 P: 1,030 0 0 0 10 Q [m³/h] 20 30 40 50 60 70 1311.45/11-EN K1311.456/39/2 154 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 100-080-160, n = 960 rpm Etanorm SYT, Etabloc 0 100 200 Q [US.gpm] 0 100 Q [IM.gpm] 4.6 300 400 200 300 15 Qmin 50 60 70 4 80 η [%] H [ft] 83 50 60 70 85.7 50 60 80 3 10 70 50 81.4 83 60 70 2 ø174/A01 80 77.9 75.1 ø162/A01 ø155/149/10°/A05 5 H [m] Ø174 - Ø154: Form/Type A01 Ø153 - Ø144: Form/Type A05 Ø143 - Ø138: Form/Type A06 1 0 0 20 ø153/138/135/25°/A06 Q [m³/h] Q [l/s] 5 40 10 60 15 80 20 100 25 1.8 ø153/138/135/25°/A06 NPSH [m] R ø174/A01 4 1 NPSH [ft] R 2 0.4 0.8 ø174/A01 1.0 ø162/A01 0.6 P [hp] ø155/149/10°/A05 ø153/138/135/25°/A06 0.4 0.5 P [kW] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,970 P: 1,031 0.2 0 20 Q [m³/h] 40 60 80 100 1311.45/11-EN K1311.456/40/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 155 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 100-080-200, n = 960 rpm Etanorm SYT, Etabloc 0 8 100 0 Qmin 200 Q [US.gpm] 100 Q [IM.gpm] 60 70 50 300 400 200 300 80 50 60 η [%] 70 85.2 80 50 6 60 20 70 84.5 80 50 H [m] 60 80 70 83.9 80 50 60 80 70 83.2 80 50 4 60 70 ø208 80 80 H [ft] ø219 80 82.6 80 81.4 ø198 80 ø190 10 ø180 ø165 2 0 1.0 0 20 Q [m³/h] Q [l/s] 5 40 10 60 15 80 20 100 25 3 NPSH NPSH [ft] [m] R R 2 0.5 1 ø219 1.5 2 ø208 P [kW] P [hp] ø198 1.0 ø190 ø180 1 ø165 0.5 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,952 P: 1,051 0 20 Q [m³/h] 40 60 80 100 1311.45/11-EN K1311.456/41/3 156 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 100-080-250, n = 960 rpm Etanorm SYT, Etabloc 0 100 0 100 Q [IM.gpm] 12 Qmin 200 Q [US.gpm] 50 60 70 300 400 200 300 75 η [%] 80 50 60 70 10 50 81.0 75 80 60 70 80 30 80.6 75 80 8 50 60 50 60 50 60 70 75 79.2 75 78.9 6 H [ft] 75 79.6 70 75 75 80.0 75 70 ø269 ø256 20 ø243 75 75 75 H [m] ø231 ø223 ø215 4 0 20 Q [m³/h] 0 40 60 Q [l/s] 10 80 100 20 1.6 NPSH [m] R 4 1 NPSH [ft] R 2 0.2 3 4 ø269 P [hp] ø256 2 ø243 ø231 P [kW] 2 ø223 ø215 1 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,958 P: 1,044 0.2 0 20 Q [m³/h] 40 60 80 100 1311.45/11-EN K1311.456/42/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 157 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 100-080-315, n = 960 rpm Etanorm SYT, Etabloc 0 200 0 100 400 Q [US.gpm] 200 Q [IM.gpm] 300 400 60 Qmin 50 60 70 75 η [%] 79.5 50 15 50 H [m] H [ft] 60 70 60 75 75 77.2 70 ø334 75 50 60 70 40 75 75.9 75 10 ø311 74.5 ø290 70 20 ø265 5 0 0 20 Q [m³/h] 40 60 Q [l/s] 10 80 100 20 120 30 10 2 NPSH [ft] R NPSH [m] R 0 0 6 8 ø334 P [kW] ø311 4 6 P [hp] ø290 4 ø265 2 2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,950 P: 1,053 0 20 Q [m³/h] 40 60 80 100 120 1311.45/11-EN K1311.456/43/3 158 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 100-080-400, n = 960 rpm 0 200 0 25 100 Qmin Q [IM.gpm] 50 400 Q [US.gpm] 200 600 300 400 500 60 80 70 η [%] 50 60 74.0 70 20 50 H [ft] 73.3 60 70 70 50 60 70 72.2 H [m] 60 ø398 70 50 70 60 15 ø380 71.2 70 69.9 ø355 40 ø330 10 0 0 20 Q [m³/h] 40 60 Q [l/s] 10 80 100 20 120 140 30 7 2 NPSH [ft] R NPSH 5 [m] R 1 2 10 ø398 8 ø380 6 10 ø355 P [hp] P [kW] ø330 4 ø315 5 2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,977 P: 1,023 0 20 Q [m³/h] 40 60 80 100 120 140 1311.45/11-EN K1311.456/44/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 159 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 125-100-160, n = 960 rpm Etanorm SYT, Etabloc 0 200 0 100 Q [IM.gpm] 4.6 400 Q [US.gpm] 200 600 300 400 500 15 Qmin 50 60 50 60 70 80 4 η [%] H [ft] 70 50 84.2 60 70 50 80 60 70 82.7 80 10 3 80 81.8 80 80.6 80 H [m] 80 80 ø185/A01 ø180/174/9°/A05 2 70 ø180/168/162/18°/A06 Ø185 - Ø177: Form/Type A01 Ø176 - Ø169: Form/Type A05 Ø168 - Ø162: Form/Type A06 1.4 0 20 0 ø179/162/162/25°/A06 5 Q [m³/h] 40 60 Q [l/s] 10 80 100 20 120 140 30 40 1.4 ø185/A01 4 1.0 ø179/162/162/25°/A06 NPSH [ft] R NPSH [m] R 2 0.5 1.2 ø185/A01 1.5 1.0 ø180/174/9°/A05 P [hp] ø180/168/162/18°/A06 0.8 ø179/162/162/25°/A06 1.0 0.6 P [kW] 0.4 0 20 Q [m³/h] 40 60 80 100 120 140 1311.45/11-EN K1311.456/45/2 160 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 125-100-200, n = 960 rpm Etanorm SYT, Etabloc 0 200 0 200 Qmin 50 400 Q [US.gpm] 600 400 Q [IM.gpm] 60 70 80 50 6 60 η [%] 70 20 85.3 80 50 60 70 82.5 H [m] 80 80 50 82.0 70 H [ft] 80 60 50 4 60 80 70 ø219 77.8 ø206 ø193 74.6 70 0 NPSH ø180 ø170 2 1.5 10 0 20 Q [m³/h] 40 10 60 Q [l/s] 80 100 20 120 140 30 40 ø170 [m] 4 R ø219 1.0 NPSH [ft] R 2 0.5 ø219 3 2.0 P [hp] ø206 1.5 2 ø193 P [kW] ø180 1.0 ø170 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,980 P: 1,020 0.5 0 20 Q [m³/h] 40 60 80 100 120 1 140 1311.45/11-EN K1311.456/46/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 161 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 125-100-250, n = 960 rpm Etanorm SYT, Etabloc 0 200 0 200 50 60 600 400 Q [IM.gpm] 11.5 Qmin 400 Q [US.gpm] 70 80 η [%] 10 50 60 85.4 70 30 80 50 8 60 81.6 80 70 H [ft] 80 ø269 79.1 50 60 70 20 6 ø250 76.3 H [m] 70 ø232 4 70 10 ø210 2.5 0 20 0 Q [m³/h] 40 10 60 Q [l/s] 80 100 20 120 140 30 40 1.8 ø210 ø269 1.5 4 1.0 NPSH [ft] R NPSH [m] R 2 0.5 4 ø269 3 4 ø250 P [hp] ø232 2 P [kW] 2 ø210 1 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,965 P: 1,036 0.4 0 20 Q [m³/h] 40 60 80 100 120 140 1311.45/11-EN K1311.456/47/2 162 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 125-100-315, n = 960 rpm Etanorm SYT, Etabloc 0 200 0 200 Qmin 400 Q [US.gpm] 600 400 Q [IM.gpm] 600 60 60 70 75 η [%] 60 80 70 75 15 H [ft] 81.7 60 80 70 75 60 H [m] 60 60 10 80 80 70 ø334 80.7 75 70 80 81.1 40 80 75 ø318 80.0 80 70 81.6 75 ø300 80 79.0 ø280 ø270 75 20 ø250 5 0 2 0 20 Q [m³/h] 40 10 60 Q [l/s] 80 100 20 120 140 30 160 40 ø334 NPSH 5 [m] R ø250 NPSH [ft] 1 R 2 8 10 ø334 6 ø318 P [hp] ø300 ø280 ø270 4 P [kW] 5 ø250 2 0 0 0 20 Q [m³/h] 40 60 80 100 120 140 160 1311.45/11-EN K1311.456/48/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 163 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 125-100-400, n = 960 rpm 0 200 0 200 Qmin 25 400 Q [US.gpm] 55 600 800 400 Q [IM.gpm] 600 800 65 70 55 65 80 η [%] 74 75.7 70 H [ft] 74 20 75.3 55 74 65 70 60 74 H [m] 55 15 55 74 70 74.5 65 70 74 70 73.4 ø401 65 70 ø380 70 72.8 40 ø355 70 ø330 10 0 50 0 Q [m³/h] 20 100 Q [l/s] 150 200 40 60 ø317 ø330 20 5 NPSH NPSH [ft] [m] R ø401 R 0 0 ø401 ø380 10 ø355 P [kW] 10 ø330 ø317 5 P [hp] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,980 P: 1,021 0 0 50 Q [m³/h] 100 150 0 200 1311.45/11-EN K1311.456/49/2 164 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 150-125-200, n = 960 rpm Etanorm SYT, Etabloc 0 200 0 Q [US.gpm] 200 600 50 60 800 400 Q [IM.gpm] 8 Qmin 400 70 1000 600 800 75 80 85 50 6 60 70 η [%] 20 87.5 75 80 50 60 85 70 50 75 60 85 85.3 85 80 70 H [ft] 82.8 4 ø224/A01 75 80 78.9 H [m] 80 75 Ø224 - Ø205: Form/Type A01 Ø204 - Ø182: Form/Type A06 2 0 50 0 ø210/A01 10 ø206/195/196/15°/A06 ø208/182/196/34°/A06 Q [m³/h] 20 100 Q [l/s] 150 200 40 60 1.9 ø224/A01 6 ø208/182/196/34°/A06 NPSH [ft] 1.5 R NPSH [m] 4 R 1.0 ø224/A01 4 3 P [hp] ø210/A01 3 ø206/195/196/15°/A06 2 ø208/182/196/34°/A06 P [kW] 2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,976 P: 1,025 1 0 50 Q [m³/h] 100 150 200 1311.45/11-EN K1311.456/50/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 165 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 150-125-250, n = 960 rpm Etanorm SYT, Etabloc 0 200 0 Q [US.gpm] 200 400 600 400 Q [IM.gpm] 11 Qmin 60 800 1000 600 800 70 80 10 85 60 70 30 80 60 8 η [%] 70 88.0 85 H [ft] 80 60 86.3 70 85 80 6 ø269 85.1 20 85 ø252 82.8 H [m] ø237 4 ø218 0 50 0 Q [m³/h] 20 100 Q [l/s] 150 200 40 250 60 2.6 8 2 NPSH [ft] R 5 NPSH [m] R 1 2 0.6 5.5 ø269 6 4 ø252 P [hp] ø237 P [kW] 4 ø218 2 2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,972 P: 1,029 0.5 0 50 Q [m³/h] 100 150 200 250 1311.45/11-EN K1311.456/51/2 166 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 150-125-315, n = 960 rpm Etanorm SYT 0 200 0 Q [US.gpm] 200 400 600 800 400 Q [IM.gpm] 1000 600 800 60 18 Qmin 50 60 70 75 80 50 16 60 70 η [%] 75 60 14 50 50 12 50 70 75 83.6 80 60 70 ø334 75 82.6 80 60 70 60 70 H [ft] 84.6 80 50 75 75 40 ø320 81.7 80 80.6 10 79.9 ø306 80 80 ø294 H [m] ø280 8 ø270 0 50 0 Q [m³/h] 20 100 Q [l/s] 150 200 40 250 60 1.8 NPSH [m] R 4 1 NPSH [ft] R 2 0.4 11 10 ø334 ø320 8 10 ø306 ø294 6 P [hp] ø280 ø270 4 5 P [kW] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,985 P: 1,015 2 1 0 50 Q [m³/h] 100 150 200 250 1311.45/11-EN K1311.456/52/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 167 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 150-125-400, n = 960 rpm Etanorm SYT 0 200 Q [US.gpm] 400 0 200 50 800 400 Q [IM.gpm] 29 Qmin 600 60 1000 600 70 1200 800 1000 75 80 50 25 η [%] 60 70 82.1 75 80 80 50 60 50 60 70 80 70 20 50 50 60 60 80 81.8 75 ø419 75 H [ft] 80 81.4 80 70 70 75 75 80 60 ø380 80.8 80 80 15 ø399 80 81.1 80 ø362 80.6 80 ø346 H [m] 40 ø330 10 0 50 0 Q [m³/h] 20 100 Q [l/s] 150 200 40 250 60 2.4 7 2 NPSH [ft] R 5 NPSH [m] R 1 2 0.4 20 ø419 ø399 15 20 ø380 ø362 P [hp] ø346 10 ø330 P [kW] 10 5 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,980 P: 1,020 1 0 50 Q [m³/h] 100 150 200 250 1311.45/11-EN K1311.456/53/2 168 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 150-125-510, n = 960 rpm 0 200 Q [US.gpm] 400 0 200 Q [IM.gpm] 30 Qmin 50 60 30 50 60 40 600 800 400 1000 600 800 η [%] 70 70 72.4 72.4 H [m] 30 70 50 60 70 70 30 Qmax ø508/A01 100 71.4 ø508/496/28°/A05 30 50 70 60 H [ft] 70 70.5 20 ø463/450/28°/A05 70 50 ø417/400/35°/A05 0 6 50 0 Q [m³/h] 20 100 Q [l/s] 150 200 40 60 ø417/400/35°/A05 ø463/450/28°/A05 15 ø508/A01 4 NPSH 250 [m] NPSH 3% [ft] 3% 2 0 0 30 ø508/A01 40 ø508/496/28°/A05 P [kW] P [hp] ø463/450/28°/A05 20 ø417/400/35°/A05 20 10 0 50 Q [m³/h] 100 150 200 250 1311.45/11-EN KGP456/5V/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 169 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 200-150-200, n = 960 rpm Etabloc 0 500 0 200 Q [IM.gpm] 400 6.8 600 Qmin 40 50 40 50 60 65 40 50 60 65 6 5 60 40 50 60 40 50 60 1000 Q [US.gpm] 65 1000 1200 20 75 70 80 η [%] H [ft] 70 75 65 800 70 75 65 1500 70 75 70 75 4 80 82.1 80 15 81.5 80.9 80 80.3 79.7 80 80 80 80 75 75 3 75 0 50 0 Q [m³/h] 100 20 70 70 ø216/A01 ø221/206/200/15°/A06 ø220/198/200/22°/A06 ø218/188/200/30°/A06 70 Ø224 - Ø216: Form/Type A01 Ø215 - Ø210: Form/Type A05 Ø209 - Ø188: Form/Type A06 2 10 ø224/A01 75 H [m] 75 Q [l/s] 150 200 40 250 60 300 350 80 100 4 10 NPSH [m] R NPSH [ft] 2 R 4 1 4 ø224/A01 ø216/A01 ø221/206/200/15°/A06 4 3 ø220/198/200/22°/A06 P [kW] ø218/188/200/30°/A06 P [hp] 2 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,992 P: 1,009 1.2 0 50 Q [m³/h] 100 150 200 250 300 2 350 1311.45/11-EN K1311.456/55/2 170 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 200-150-250, n = 960 rpm Etabloc 0 500 0 500 Qmin 50 60 50 8 60 50 60 50 60 50 50 60 1500 1000 Q [IM.gpm] 11 10 1000 Q [US.gpm] 70 70 75 1500 80 η [%] 85 30 75 80 70 70 70 60 80 H [ft] 75 85 80 88.2 75 80 70 85 87.0 85 75 6 89.7 85 75 85.3 80 84.1 H [m] 20 85 ø269 85 85 ø258 82.6 80 80 4 ø250 ø239 80 ø230 ø220 10 2.5 0 50 Q [m³/h] 100 0 20 Q [l/s] 150 200 40 250 60 300 350 80 400 100 2.6 8 2 NPSH [ft] R 5 NPSH [m] R 1 8 ø269 10 ø258 6 P [hp] ø250 ø239 4 ø230 5 ø220 P [kW] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,970 P: 1,031 2 0 50 Q [m³/h] 100 150 200 250 300 350 400 1311.45/11-EN K1311.456/56/2 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 171 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 200-150-315, n = 960 rpm Etanorm SYT 0 500 0 500 Qmin 60 1000 Q [US.gpm] 1500 1000 Q [IM.gpm] 70 80 η [%] 85 60 15 60 H [m] 60 60 70 80 80 70 40 84.7 85 80 70 83.5 60 10 88.3 70 70 80 ø334 84.0 80 80 83.1 H [ft] ø317 80 79.2 ø303 ø290 80 ø277 20 5 0 2 NPSH 0 50 Q [m³/h] 100 20 Q [l/s] 150 200 40 250 60 300 350 80 400 100 5 [m] R NPSH [ft] 1 R 2 15 20 ø334 P [kW] P [hp] ø317 10 ø303 ø290 10 ø277 ø264 5 Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,974 P: 1,027 0 50 Q [m³/h] 100 150 200 250 300 350 400 1311.45/11-EN K1311.456/57/3 172 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 200-150-400, n = 960 rpm Etanorm SYT 0 500 0 500 60 1500 1000 Q [IM.gpm] 30 Qmin 1000 Q [US.gpm] 1500 70 80 η [%] 85 25 60 80 86.6 70 80 85 20 H [ft] 85 60 70 85.9 80 80 60 85 ø419 70 84.5 60 80 80 15 83.7 80 ø385 80 H [m] 40 70 10 ø355 ø330 8 0 0 20 100 Q [m³/h] Q [l/s] 40 200 300 60 400 80 100 120 4 ø419 10 ø330 2 NPSH [ft] R NPSH [m] R 0 0 28 ø419 20 ø385 20 ø355 ø330 10 P [hp] P [kW] Korrekturfaktor Stahlgusslaufrad correction factor steel impeller ╖: 0,993 P: 1,007 0 0 100 Q [m³/h] 200 300 0 400 1311.45/11-EN K1311.456/58/1 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 173 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 200-150-510, n = 960 rpm 0 500 0 500 40 Qmin 30 1000 Q [US.gpm] 1500 1000 Q [IM.gpm] 60 70 η [%] 74.5 40 1500 77.1 H [m] 30 40 30 40 60 70 74.5 74.5 Qmax 76.4 60 70 74.5 30 100 74.5 75.5 30 40 ø508/A01 74.5 60 70 70 74.5 70 75.0 ø488/472/A05 74.5 H [ft] ø463/447/28°/A05 20 70 50 ø420/404/28°/A05 0 50 0 Q [m³/h] 100 20 Q [l/s] 150 200 40 250 60 300 80 350 400 100 ø508/A01 20 5 ø488/472/A05 ø463/447/28°/A05 NPSH NPSH [ft] 3% [m] 3% ø420/404/28°/A05 0 0 60 ø508/A01 40 ø488/472/A05 P [kW] 40 ø463/447/28°/A05 P [hp] ø420/404/28°/A05 20 20 0 0 0 50 Q [m³/h] 100 150 200 250 300 350 400 1311.45/11-EN KGP.456/5W/0 174 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 200-200-250, n = 960 rpm 0 500 0 1000 Q [US.gpm] 500 1500 2000 1000 Q [IM.gpm] 1500 30 20 Qmin 30 η [%] 40 50 8 60 H [ft] 70 20 80 30 84 40 50 85.3 60 84 6 20 30 20 70 40 80 80 50 H [m] ø260/A01 80 70 20 4 30 Qmax 82.8 60 78.7 40 ø247/240/6°/A05 50 ø239/223/215/14°/A06 10 60 69.4 ø231/200/215/27°/A06 2 0 4 0 20 100 Q [m³/h] Q [l/s] 40 200 300 60 80 400 100 500 120 ø239/223/215/14°/A06 ø231/200/215/27°/A06 NPSH ø247/240/6°/A05 10 [m] ø260/A01 3% NPSH 2 [ft] 3% 4 ø260/A01 8 10 P [kW] ø247/240/6°/A05 6 P [hp] ø239/223/215/14°/A06 4 ø231/200/215/27°/A06 0 100 Q [m³/h] 200 300 400 5 500 1311.45/11-EN KGP.456/60/1 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 175 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 250-200-275, n = 960 rpm 0 1000 0 500 1000 Q [IM.gpm] 1500 2000 Qmin 30 10 2000 Q [US.gpm] 40 50 60 η [%] 70 30 80 8 30 40 50 30 40 50 60 60 H [m] 85 70 70 H [ft] 85.5 80 85 80 84.6 83.3 6 20 80 80 Qmax 80 70 4 70 0 8 NPSH 0 100 Q [m³/h] 200 300 Q [l/s] 50 400 70 ø280/A01 ø280/257/280/20°/A08 10 ø280/247/270/20°/A08 500 100 600 150 ø280/A01 [m] 20 3% 5 ø280/257/280/20°/A08 NPSH [ft] ø280/247/270/20°/A08 3% 5 1 14 10 ø280/A01 12 P [kW] P [hp] 8 10 ø280/257/280/20°/A08 ø280/247/270/20°/A08 6 8 0 100 Q [m³/h] 200 300 400 500 600 1311.45/11-EN KGP.456/6T/0 176 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 250-200-320, n = 960 rpm 0 1000 0 500 Q [IM.gpm] 1000 30 15 2000 Q [US.gpm] 3000 1500 2000 2500 η [%] 40 50 60 Qmin 70 80 85 H [m] 86.5 30 40 50 60 40 70 85 80 10 30 40 50 Qmax 83.7 60 80 H [ft] 70 80 80 70 82.0 80 20 ø325/A01 70 5 60 ø280/256/270/20°/A06 ø304/287/16°/A05 0 0 100 Q [m³/h] 200 50 300 Q [l/s] 400 500 100 600 700 150 200 ø325/A01 20 5 ø304/287/16°/A05 NPSH ø280/256/270/20°/A06 [m] NPSH [ft] 3% 3% 0 0 ø325/A01 15 20 P [kW] ø304/287/16°/A05 P [hp] 10 ø280/256/270/20°/A06 10 5 0 100 Q [m³/h] 200 300 400 500 600 700 1311.45/11-EN KGP.456/6V/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 177 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 250-200-375, n = 960 rpm 0 1000 0 500 30 Q [IM.gpm] 2000 Q [US.gpm] 1000 1500 2000 Qmin 40 50 60 70 η [%] 80 20 85 86.7 30 H [m] 40 50 60 70 60 80 85 85 Qmax 85.6 15 40 50 60 H [ft] 80 85 30 70 80 80 40 ø373/A01 81.0 80 ø356/343/14°/A05 10 70 ø334/305/30°/A05 0 0 100 Q [m³/h] 200 300 Q [l/s] 50 400 500 100 600 150 ø373/A01 20 5 ø356/343/14°/A05 NPSH NPSH [m] [ft] 3% ø334/305/30°/A05 3% 0 0 30 40 ø373/A01 P [kW] 30 ø356/343/14°/A05 20 P [hp] 20 ø334/305/30°/A05 10 10 0 100 Q [m³/h] 200 300 400 500 600 1311.45/11-EN KGP.456/6W/0 178 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 250-200-435 , n = 960 rpm 0 30 1000 0 500 30 Q [IM.gpm] 40 Qmin 60 30 40 30 60 40 60 30 40 60 1000 70 70 25 2000 Q [US.gpm] 1500 80 2000 η [%] 85.0 80 80 70 85.6 80 H [ft] 80 Qmax 70 20 84.0 80 H [m] ø433/A01 60 80 83.1 80 ø427/405/28°/A05 80 15 70 10 ø405/383.5/28°/A05 40 ø386/364/28°/A05 0 0 100 Q [m³/h] 200 300 Q [l/s] 50 400 500 100 600 150 18 ø433/A01 NPSH 4 NPSH [ft] 3% ø427/405/28°/A05 ø405/383.5/28°/A05 10 [m] 3% ø386/364/28°/A05 2 2 40 ø433/A01 ø427/405/28°/A05 40 30 ø405/383.5/28°/A05 P [kW] ø386/364/28°/A05 P [hp] 20 20 10 0 100 Q [m³/h] 200 300 400 500 600 1311.45/11-EN KGP.456/6X/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 179 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 250-200-510 , n = 960 rpm 0 500 Q [US.gpm] 1000 0 500 Q [IM.gpm] 1500 1000 50 40 50 60 2500 1500 Qmin 40 2000 2000 η [%] 70 80 40 83.7 H [m] 60 70 Qmax 80 40 50 30 83.2 60 ø508/A01 100 70 80 80 82.8 40 50 60 ø490/472/28°/A05 80 70 H [ft] 80 81.2 20 ø457/438/28°/A05 80 ø410/390/A05 0 0 100 Q [m³/h] 200 300 Q [l/s] 50 400 50 500 100 600 150 ø508/A01 4 NPSH ø490/472/28°/A05 10 [m] 3% ø457/438/28°/A05 2 NPSH ø410/390/A05 [ft] 3% 0 0 60 ø508/A01 80 P [kW] ø490/472/28°/A05 60 40 P [hp] ø457/438/28°/A05 40 ø410/390/A05 20 20 0 100 Q [m³/h] 200 300 400 500 600 1311.45/11-EN KGP.456/6Y/0 180 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 300-250-295, n = 960 rpm 0 14 1000 0 2000 Q [US.gpm] 1000 3000 2000 Q [IM.gpm] 3000 30 12 40 30 40 40 50 Qmin 60 50 60 η [%] 70 10 70 30 40 75 H [ft] 75 50 8 78.9 60 70 H [m] 79.0 75 6 75 77.8 75 75 4 70 20 Qmax ø322/A01 ø322/299/322/15°/A06 ø302/269/302/20°/A08 0 0 200 50 Q [m³/h] Q [l/s] 400 100 600 150 800 200 250 ø322/A0114 4 ø322/299/322/15°/A06 NPSH [ft] 3% NPSH 10 ø302/269/302/20°/A08 [m] 3% 2 4 18 16 ø322/A01 20 14 ø322/299/322/15°/A06 P [hp] P [kW] 12 15 ø302/269/302/20°/A08 10 0 200 Q [m³/h] 400 600 800 1311.45/11-EN KGP.456/7H/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 181 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 300-250-295.1 , n = 960 rpm 0 15 1000 0 H [m] 2000 Q [US.gpm] 500 Q [IM.gpm] 1000 3000 1500 2000 2500 30 40 50 30 40 Qmin η [%] 60 40 50 10 30 30 70 60 40 40 H [ft] 75 70 50 60 75 70 50 77.4 60 75 78.0 70 75 5 75 77.8 76.2 75 75 75 70 0 0 100 Q [m³/h] 200 50 300 Q [l/s] 500 100 600 150 20 ø322/A01 ø313/297/313/10°/A06 ø303/269/303/15°/A08 ø303/245/303/15°/A08 700 200 9 ø303/269/303/15°/A08 ø313/297/313/10°/A06 ø322/A01 NPSH 3% [ft] ø303/245/303/15°/A08 2 NPSH 400 70 Qmax 5 [m] 3% 1 2 14 ø322/A01 12 15 10 ø313/297/313/10°/A06 P [hp] P [kW] 8 10 ø303/269/303/15°/A08 ø303/245/303/15°/A08 6 0 100 Q [m³/h] 200 300 400 500 600 700 1311.45/11-EN KGP.456/7J/0 182 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 300-250-320 , n = 960 rpm 0 1000 0 1000 30 14 40 2000 Q [US.gpm] 3000 4000 2000 Q [IM.gpm] 3000 Qmin 50 60 70 η [%] 80 12 30 40 50 30 40 50 60 70 10 40 85 85.7 80 60 70 85 80 84.1 85 H [ft] 85.3 85 8 80 H [m] 80 Qmax 80 6 ø327/A01 70 ø320/304/320/12.5°/A08 ø318/290/318/20°/A08 4 6 20 70 0 200 0 50 Q [m³/h] Q [l/s] 400 100 600 150 800 200 1000 250 ø327/A0118 NPSH [m] 3% NPSH 4 [ft] 3% ø318/290/318/20°/A08 ø320/304/320/12.5°/A08 10 2 6 22 ø327/A01 20 25 18 P [hp] ø320/304/320/12.5°/A08 16 P [kW] 20 ø318/290/318/20°/A08 14 12 0 200 Q [m³/h] 400 600 800 1000 1311.45/11-EN KGP.456/7K/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 183 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 300-250-375, n = 960 rpm 0 1000 0 1000 30 20 Q [US.gpm] 40 Q [IM.gpm] Qmin 50 2000 3000 4000 2000 3000 η [%] 60 70 80 60 85 85.4 30 40 15 50 60 H [ft] 85 70 80 H [m] 30 40 84.2 50 60 80 Qmax 40 70 80 80 81.9 10 80 ø373/A01 70 70 ø354/334/16°/A05 20 ø326/299/314/20°/A06 5 0 200 Q [m³/h] 0 400 600 Q [l/s] 100 800 1000 200 ø373/A01 20 5 NPSH ø354/334/16°/A05 ø326/299/314/20°/A06 [m] NPSH [ft] 3% 3% 0 0 ø373/A01 30 40 P [kW] ø354/334/16°/A05 P [hp] 20 ø326/299/314/20°/A06 20 10 0 200 Q [m³/h] 400 600 800 1000 1311.45/11-EN KGP.456/7M/0 184 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 300-250-435, n = 960 rpm 0 1000 0 2000 Q [US.gpm] 1000 3000 4000 2000 Q [IM.gpm] 3000 100 30 30 40 50 60 Qmin η [%] 70 80 85 88.2 25 30 40 50 60 80 70 80 85 Qmax 85 87.8 20 30 40 50 60 H [ft] 80 85 70 60 80 H [m] 80 ø433/A01 84.6 15 ø414/399/14°/A05 80 40 ø413/354/316/30°/A08 10 10 NPSH 0 200 0 50 Q [m³/h] Q [l/s] 400 100 600 150 800 200 1000 250 ø433/A01 [m] 3% 20 5 ø414/399/14°/A05 ø413/354/316/30°/A08 NPSH [ft] 3% 0 0 60 80 ø433/A01 P [kW] ø414/399/14°/A05 60 40 P [hp] ø413/354/316/30°/A08 40 20 20 0 200 Q [m³/h] 400 600 800 1000 1311.45/11-EN KGP.456/7N/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 185 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 300-250-510, n = 960 rpm 0 1000 0 40 1000 30 40 50 2000 Q [US.gpm] 4000 2000 Q [IM.gpm] 70 Qmin 60 3000 80 84 3000 η [%] 120 35 86.9 30 40 50 60 70 80 Qmax 84 100 84 30 85.1 30 40 H [m] 50 60 70 ø508/A01 H [ft] 80 84 84 25 85.1 80 84 ø485/460/28°/A05 80 20 60 ø450/424/28°/A05 0 200 0 50 Q [m³/h] Q [l/s] 400 100 600 150 800 200 1000 250 ø508/A01 16 NPSH 4 NPSH [ft] 3% 10 ø485/460/28°/A05 [m] 3% ø450/424/28°/A05 2 2 ø508/A01 80 100 ø485/460/28°/A05 60 P [hp] P [kW] ø450/424/28°/A05 40 50 20 0 200 Q [m³/h] 400 600 800 1000 1311.45/11-EN KGP.456/7P/0 186 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 350-300-350, n = 960 rpm 0 2000 0 4000 Q [US.gpm] 1000 Q [IM.gpm] 2000 6000 3000 4000 5000 60 30 30 15 40 40 Qmin 50 50 η [%] 60 H [ft] 70 60 70 30 H [m] 40 50 80 80 60 40 70 83.8 80 10 83.8 83.2 80 80 5 70 80 Qmax ø375/A01 20 ø375/348/375/15°/A06 ø352/313/352/20°/A08 0 7 NPSH 0 200 Q [m³/h] 400 100 600 Q [l/s] 800 1000 200 1200 300 1400 400 ø375/348/375/15°/A06 20 ø375/A01 [m] 3% 5 NPSH ø352/313/352/20°/A08 [ft] 3% 5 1 35 ø375/A01 30 40 ø375/348/375/15°/A06 P [kW] P [hp] 25 30 20 ø352/313/352/20°/A08 0 200 Q [m³/h] 400 600 800 1000 1200 1400 1311.45/11-EN KGP.456/7T/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 187 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 350-300-350.1 , n = 960 rpm 0 20 1000 Q [US.gpm] 2000 0 1000 3000 4000 2000 Q [IM.gpm] 5000 3000 4000 60 30 40 50 30 15 30 H [m] 30 10 Qmin η [%] 60 40 50 H [ft] 70 60 70 40 40 50 80 70 50 40 80 60 80.8 60 Qmax 81.9 80 70 80 81.4 79.5 80 80 20 ø375/A01 70 5 70 70 ø364/345/364/10°/A06 ø352/285/252/15°/A08 0 0 200 Q [m³/h] 400 100 600 Q [l/s] 800 ø352/313/352/15°/A08 1000 200 1200 300 ø375/A01 ø364/345/364/10°/A06 NPSH [ft] 4 ø352/313/352/15°/A08 ø352/285/252/15°/A08 NPSH 16 3% 10 [m] 3% 2 4 30 40 ø375/A01 P [hp] 25 P [kW] 30 ø364/345/364/10°/A06 20 ø352/313/352/15°/A08 20 ø352/285/252/15°/A08 15 0 200 Q [m³/h] 400 600 800 1000 1200 1311.45/11-EN KGP.456/7U/0 188 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 350-300-375, n = 960 rpm 0 20 2000 0 2000 30 40 50 4000 Q [US.gpm] 6000 4000 Q [IM.gpm] Qmin 60 60 70 80 15 30 40 50 30 40 50 η [%] 85 60 60 70 80 70 85 80 H [m] H [ft] 87.3 87.1 85 40 85 86.7 85 85 Qmax 10 80 80 80 70 70 5 ø380/A01 20 ø380/352/380/20°/A08 ø365/333/365/20°/A08 0 0 200 Q [m³/h] 400 100 600 Q [l/s] 800 1000 200 1200 300 1400 1600 400 ø380/A01 6 NPSH 70 20 [m] 3% ø365/333/365/20°/A08 NPSH [ft] 3% 4 ø380/352/380/20°/A08 10 60 ø380/A01 40 50 P [kW] P [hp] ø380/352/380/20°/A08 ø365/333/365/20°/A08 40 30 30 0 200 Q [m³/h] 400 600 800 1000 1200 1400 1600 1311.45/11-EN KGP.456/7V/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 189 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 350-300-435 , n = 960 rpm 0 30 2000 0 2000 30 40 50 60 4000 Q [US.gpm] 6000 4000 Q [IM.gpm] Qmin η [%] 70 80 25 85 80 89.0 30 20 H [ft] 40 50 60 70 80 85 85 H [m] 30 40 88.5 50 60 15 60 Qmax 80 70 80 85 85 87.6 ø434/A01 80 40 85 80 10 70 ø406/383/16°/A05 ø373/343/360/20°/A06 0 6 0 200 Q [m³/h] 400 100 600 Q [l/s] 800 1000 200 1200 300 1400 1600 400 ø434/A01 NPSH 18 [m] ø406/383/16°/A05 4 ø373/343/360/20°/A06 3% NPSH [ft] 3% 10 2 4 80 100 ø434/A01 60 80 P [hp] P [kW] ø406/383/16°/A05 60 40 ø373/343/360/20°/A06 40 20 0 200 Q [m³/h] 400 600 800 1000 1200 1400 1600 1311.45/11-EN KGP.456/7X/0 190 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm 350-300-510 , n = 960 rpm 0 2000 0 40 2000 30 40 50 4000 Q [US.gpm] 6000 4000 Q [IM.gpm] Qmin 60 70 80 η [%] 85 H [m] 86.7 30 40 50 60 70 Qmax 80 85 30 100 85 85.6 30 40 50 60 80 85 70 80 80 H [ft] 70 82.3 ø508/A01 20 80 ø482/464.5/14°/A05 70 50 ø452/412/30°/A05 0 0 200 Q [m³/h] 400 100 600 Q [l/s] 800 1000 200 1200 300 1400 1600 400 ø508/A01 50 10 ø482/464.5/14°/A05 NPSH NPSH [m] [ft] 3% ø452/412/30°/A05 3% 0 0 ø508/A01 150 100 ø482/464.5/14°/A05 P [kW] P [hp] 100 ø452/412/30°/A05 50 50 0 200 Q [m³/h] 400 600 800 1000 1200 1400 1600 1311.45/11-EN KGP.456/7Y/0 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 191 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-R 125-500.2, n = 960 rpm Etanorm-RSY 0 200 Q [US.gpm] 400 0 200 Q [IM.gpm] 50 40 60 50 50 60 60 H [m] 150 η [%] 70 72 65 72 65 74.0 73 73.5 72 65 73 73 70 72 65 70 65 70 70.7 60 65 65 60 60 65 70 20 100 70 70 71.6 70 72 72 72.5 65 H [ft] 73 70 50 1000 800 65 60 60 800 600 70 50 30 600 400 50 60 60 50 50 50 ø405 ø380 50 50 ø340 10 ø300 ø260 0 4 NPSH 50 0 Q [m³/h] 100 Q [l/s] 20 150 200 40 250 60 10 [m] R 2 NPSH [ft] R 0 0 30 ø405 20 ø380 P [hp] ø340 15 P [kW] 20 ø300 10 ø260 10 5 0 50 Q [m³/h] 100 150 200 250 Table 15: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 192 Correction coefficient S [m] 0,5 0,5 0,5 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Calculation NPSHavailable ≥ NPSH + correction coefficient S 1311.45/11-EN K34555/1 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-R 150-500.1, n = 960 rpm Etanorm-RSY 0 40 500 Q [US.gpm] 0 500 50 50 H [m] 50 50 50 1500 1000 Q [IM.gpm] 60 65 70 60 65 70 75 1500 78 80 η [%] 75 81.4 78 80 50 30 1000 60 60 70 65 60 60 65 65 65 70 80 80.9 75 78 78 80 79.7 75 78 78 70 70 75 77.1 77.9 75 78 78.6 75 100 75 70 78 75 70 75 75 75 ø500 ø480 70 70 20 H [ft] ø460 70 70 65 65 ø440 ø420 ø410 0 3.5 0 100 20 Q [l/s] Q [m³/h] 200 40 50 300 60 80 400 100 120 10 NPSH [m] R 2 NPSH [ft] R 2 0.5 40 ø500 ø480 ø460 30 40 ø440 P [kW] ø420 ø410 P [hp] 20 20 10 0 100 Q [m³/h] 200 300 400 1311.45/11-EN K34558/0 Table 16: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 Correction coefficient S [m] 0,5 0,5 0,5 Calculation NPSHavailable ≥ NPSH + correction coefficient S Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 193 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-R 200-250, n = 960 rpm 0 500 Q [US.gpm] 1000 0 500 1500 2000 1000 Q [IM.gpm] 2500 1500 2000 8 η [%] 60 70 6 75 70 H [m] 83 4 84 75 85.0 80 60 60 20 80 60 84 83 70 83 83.6 75 70 75 80 H [ft] 80 83 75 80 81.7 75 80 78.2 75 2 0 100 Q [m³/h] 0 200 300 Q [l/s] 50 400 70 10 70 75 ø269/240/26°/A05 ø256/225/222/26°/A06 70 ø244/210/222/26°/A06 ø237/200/222/26°/A06 70 500 100 150 12 NPSH [ft] R 10 3 NPSH [m] R 2 6 6 8 ø269/240/26°/A05 P [hp] P [kW] 6 ø256/225/222/26°/A06 4 ø244/210/222/26°/A06 4 ø237/200/222/26°/A06 2 0 100 Q [m³/h] 200 300 400 500 Table 17: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 194 Correction coefficient S [m] 0,5 0,5 0,5 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Calculation NPSHavailable ≥ NPSH + correction coefficient S 1311.45/11-EN K34561/0 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-R 200-260, n = 960 rpm 0 500 Q [US.gpm] 1000 0 500 1500 2000 1000 Q [IM.gpm] 2500 1500 2000 60 28 75 8 η [%] 79 60 82 75 60 79 H [m] H [ft] 83.5 82 75 82 83.3 6 20 79 79.7 79 82 79 79 75 75 75 4 ø260 ø240 0 100 Q [m³/h] 0 200 300 Q [l/s] 50 400 ø250 12 500 100 150 4 NPSH 13 NPSH [ft] [m] R R 10 3 2 6 12 ø260 8 10 ø250 P [kW] P [hp] ø240 6 8 6 4 0 100 Q [m³/h] 200 300 400 500 1311.45/11-EN K34898/0 Table 18: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 Correction coefficient S [m] 0,5 0,5 0,5 Calculation NPSHavailable ≥ NPSH + correction coefficient S Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 195 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-R 200-330, n = 960 rpm Etanorm-RSY 0 1000 0 500 Q [IM.gpm] 55 60 15 70 1500 2000 η [%] 75 80 84.5 55 60 H [m] 65 2000 Q [US.gpm] 1000 65 55 60 65 70 75 70 84.5 85.2 75 84.5 80 65 40 84.5 10 55 60 86.0 80 80 H [ft] 82.9 70 80 75 ø330 80 75 78.9 75 ø310 5 20 70 75 70 65 ø290 ø270 0 100 Q [m³/h] 0 200 300 Q [l/s] 50 400 500 100 600 150 16 ø330 4 NPSH [ft] R NPSH 10 [m] R 2 6 ø330 15 20 ø310 P [kW] P [hp] ø290 10 ø270 10 5 0 100 Q [m³/h] 200 300 400 500 600 Table 19: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 196 Correction coefficient S [m] 0,5 0,5 0,5 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Calculation NPSHavailable ≥ NPSH + correction coefficient S 1311.45/11-EN K34902/0 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-R 200-400, n = 960 rpm Etanorm-RSY 0 500 Q [US.gpm] 1000 0 500 1500 2000 1000 Q [IM.gpm] 2500 1500 2000 25 60 80 70 75 80 η [%] 83 60 70 20 60 70 H [m] 75 80 83 83 85.2 80 83 60 70 H [ft] 84.6 75 75 83 83.2 83 80 15 60 80 75 80 83 83.9 ø405 75 80 83 70 40 75 80 ø380 75 10 ø360 ø340 0 100 Q [m³/h] 0 200 300 Q [l/s] 50 400 500 100 600 150 14 4 NPSH [ft] R NPSH 10 [m] R 2 4 ø405 30 40 P [kW] ø380 P [hp] 20 ø360 ø340 20 10 0 100 Q [m³/h] 200 300 400 500 600 1311.45/11-EN K34573/0 Table 20: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 Correction coefficient S [m] 0,5 0,5 0,5 Calculation NPSHavailable ≥ NPSH + correction coefficient S Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 197 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-R 200-500, n = 960 rpm Etanorm-RSY 0 1000 0 500 Q [IM.gpm] 60 60 40 70 70 60 H [m] 70 60 70 1500 74.5 78 74.5 80 78 74.5 2000 η [%] 82 83.1 80 82 81.4 78 80 80 80 81.2 74.5 70 60 78 77.8 78 70 74.5 74.5 75.0 74.5 74.5 74.5 70 20 100 74.5 74.5 80 79.1 74.5 70 78 78 78 60 30 2000 Q [US.gpm] 1000 70 70 70 70 ø510 ø500 H [ft] ø480 ø460 ø440 ø420 0 100 Q [m³/h] 0 200 300 Q [l/s] 50 50 400 500 600 100 150 18 NPSH [ft] 4 NPSH R [m] 10 R 2 2 60 ø510 ø500 80 P [kW] 60 ø480 40 ø460 P [hp] ø440 40 ø420 20 20 0 100 Q [m³/h] 200 300 400 500 600 Table 21: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 198 Correction coefficient S [m] 0,5 0,5 0,5 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Calculation NPSHavailable ≥ NPSH + correction coefficient S 1311.45/11-EN K34577/0 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-R 250-300, n = 960 rpm Etanorm-RSY 0 1000 0 2000 Q [US.gpm] 1000 3000 4000 2000 Q [IM.gpm] 3000 40 12 η [%] 10 H [ft] 60 70 8 75 60 80 70 60 6 82 83.5 75 70 H [m] 75 83.5 82 82.5 80 4 20 84.3 80 82 80 82 80.9 75 80 80 70 75 70 2 60 70 75 ø313/285/23°/A05 ø291/260/258/23°/A06 ø279/245/258/23°/A06 60 0 200 0 50 Q [m³/h] Q [l/s] 400 100 600 150 800 200 250 18 NPSH [ft] R 4 NPSH 10 [m] R 2 14 12 15 10 P [hp] ø313/285/23°/A05 8 10 P [kW] 6 ø291/260/258/23°/A06 ø279/245/258/23°/A06 4 5 0 200 Q [m³/h] 400 600 800 1311.45/11-EN K34580/0 Table 22: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 Correction coefficient S [m] 0,5 0,5 0,5 Calculation NPSHavailable ≥ NPSH + correction coefficient S Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 199 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-R 250-330, n = 960 rpm Etanorm-RSY 0 1000 0 2000 Q [US.gpm] 1000 60 14 3000 2000 Q [IM.gpm] 70 75 80 3000 η [%] 83 87 60 12 70 80 87 60 10 40 88.7 75 83 70 83.4 75 83 83 H [m] H [ft] 80 80 80.5 8 80 ø330 80 75 6 ø310 75 20 ø290 0 200 0 50 Q [m³/h] Q [l/s] 400 100 600 150 800 200 250 18 NPSH [ft] 4 NPSH R 10 [m] R 2 4 25 ø330 30 20 P [hp] ø310 P [kW] 15 20 ø290 10 0 200 Q [m³/h] 400 600 800 Table 23: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 200 Correction coefficient S [m] 0,5 0,5 0,5 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Calculation NPSHavailable ≥ NPSH + correction coefficient S 1311.45/11-EN K34584/0 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-R 250-400, n = 960 rpm Etanorm-RSY 0 1000 0 2000 Q [US.gpm] 1000 3000 4000 2000 Q [IM.gpm] 3000 25 80 60 70 75 η [%] 80 83 20 85 60 70 75 85 70 80 83 83 60 70 80 84.3 75 75 60 83 83 60 15 85.4 80 H [m] H [ft] 75 80 84.9 70 83 75 79.8 40 80 70 75 10 ø380 70 75 70 ø405 ø360 20 ø340 5 0 200 0 50 Q [m³/h] Q [l/s] 400 100 600 150 800 200 250 18 NPSH [ft] R 4 NPSH 10 [m] R 2 6 ø405 60 40 P [hp] 30 40 ø380 P [kW] ø360 20 ø340 20 10 0 200 Q [m³/h] 400 600 800 1311.45/11-EN K34588/0 Table 24: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 Correction coefficient S [m] 0,5 0,5 0,5 Calculation NPSHavailable ≥ NPSH + correction coefficient S Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 201 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-R 250-500, n = 960 rpm Etanorm-RSY 0 1000 0 60 40 2000 Q [US.gpm] 1000 60 Q [IM.gpm] 65 65 70 60 65 75 60 65 30 60 70 75 70 80 η [%] 82 84.5 82 85.1 84.5 75 70 84.5 75 82 80 84.5 82 83.4 82 100 84.5 85.2 82 80 85.4 84.5 82 80 65 4000 3000 75 80 70 80 H [m] 3000 2000 80 82 84.5 82 85.2 H [ft] 75 84.5 20 75 80 ø520 80 75 82 80 75 75 ø500 ø480 ø460 50 ø440 0 200 0 50 Q [m³/h] Q [l/s] 400 100 600 150 800 1000 200 250 14 4 NPSH NPSH [ft] [m] R R 10 3 7 2 80 ø520 100 ø500 60 P [hp] ø480 P [kW] ø460 ø440 40 50 20 0 200 Q [m³/h] 400 600 800 1000 Table 25: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 202 Correction coefficient S [m] 0,5 0,5 0,5 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Calculation NPSHavailable ≥ NPSH + correction coefficient S 1311.45/11-EN K34592/0 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-R 300-340, n = 960 rpm 15 0 2000 0 1000 Q [IM.gpm] 4000 Q [US.gpm] 2000 3000 4000 η [%] H [m] 40 60 70 60 60 10 76 70 70 76 76 80 60 H [ft] 82 80 80 70 82 83.6 80.2 82.282 80 80 76 5 82 76 76 77.0 20 80 76 70 70 76 70 ø351/320/23°/A05 ø338/305/289/23°/A06 ø331/295/289/23°/A06 ø313/270/289/23°/A06 0 6 200 Q [m³/h] 400 0 600 Q [l/s] 100 800 1000 200 1200 300 18 NPSH [m] R NPSH [ft] R 4 10 30 20 P [hp] P [kW] ø351/320/23°/A05 15 20 ø338/305/289/23°/A06 ø331/295/289/23°/A06 10 ø313/270/289/23°/A06 10 0 200 Q [m³/h] 400 600 800 1000 1200 1311.45/11-EN K34595/0 Table 26: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 Correction coefficient S [m] 1,2 0,5 0,5 NPSHavailable ≥ NPSH + correction coefficient S Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 203 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-R 300-360, n = 960 rpm Etanorm-RSY 0 2000 0 1000 Q [IM.gpm] 60 15 4000 Q [US.gpm] 2000 70 3000 η [%] 75 80 60 70 83 75 85 80 87.1 83 H [m] 4000 60 40 85 70 75 85.8 80 10 85 85 81.6 83 83 H [ft] 80 80 80 75 75 75 70 ø360 20 ø340 5 ø320 0 200 Q [m³/h] 0 400 600 Q [l/s] 100 800 1000 200 1200 300 40 10 NPSH [ft] R NPSH [m] R 20 5 ø360 30 40 ø340 P [kW] P [hp] 20 ø320 20 0 200 Q [m³/h] 400 600 800 1000 1200 Table 27: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 204 Correction coefficient S [m] 0,5 0,5 0,5 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Calculation NPSHavailable ≥ NPSH + correction coefficient S 1311.45/11-EN K34599/0 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-R 300-400, n = 960 rpm Etanorm-RSY 0 2000 0 1000 Q [IM.gpm] 60 60 25 60 60 20 4000 Q [US.gpm] 2000 70 70 70 70 3000 75 79 75 75 79 81.5 η [%] 84 81.5 86.1 79 85.5 84.6 81.5 H [ft] 84 84 84 75 79 81.5 79 81.5 85.1 81.5 H [m] 80 85.5 84 60 70 4000 79 75 84 83.8 79 81.5 15 81.5 79 81.5 82.1 79 10 ø430 ø420 ø400 79 81.5 60 75 75 40 ø380 ø360 0 200 Q [m³/h] 0 400 600 Q [l/s] 100 800 1000 200 1200 300 18 NPSH [ft] 5 NPSH R 15 [m] R 4 11 80 ø430 100 ø420 60 P [hp] P [kW] ø400 40 ø380 50 ø360 20 0 200 Q [m³/h] 400 600 800 1000 1200 1311.45/11-EN K34603/0 Table 28: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 Correction coefficient S [m] 0,5 0,5 0,5 Calculation NPSHavailable ≥ NPSH + correction coefficient S Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY 205 Centrifugal Pumps with Shaft Seal Standardised Water Pump / Thermal Oil and Hot Water Pump Etanorm-R 300-500, n = 960 rpm Etanorm-RSY 0 2000 0 1000 4000 Q [US.gpm] 2000 Q [IM.gpm] 3000 4000 140 40 60 70 75 60 70 75 60 70 H [m] 60 70 60 30 70 75 80 80 η [%] 83 85.5 80 83 85.5 H [ft] 86.3 83 85.5 86.1 85.5 75 85.5 86.4 80 83 83 85.5 75 83 80 80 83 83 83 83.7 80 83 20 75 5.5 NPSH 200 Q [m³/h] 0 400 600 Q [l/s] 100 800 ø520 ø510 ø490 75 ø450 75 75 80 80 0 100 80 84.8 60 ø470 1000 200 1200 300 18 [m] R NPSH [ft] R 4 10 2.5 120 ø520 100 ø510 150 P [hp] ø490 80 100 ø470 60 ø450 P [kW] 40 50 20 0 200 Q [m³/h] 400 600 800 1000 1200 Table 29: Correction coefficients Impeller material EN-GJL-250 CC480K-GS 1.4408 206 Correction coefficient S [m] 0,5 0,5 0,5 Etanorm/ SYT/ V, Etabloc/ SYT, Etanorm-RSY Calculation NPSHavailable ≥ NPSH + correction coefficient S 1311.45/11-EN K34607/0 17/06/2021 KSB Shanghai Pump Co., Ltd 1400 Jiangchuan Rd. 200245, Minhang, Shanghai, China Tel. +86 21 64302888 www.ksb.com.cn KSB Pumps and Valves (Pty.) Ltd Cor. North Reef & Activia Roads, Activia Park: 1401 Germiston (Johannesburg) Republic of South Africa Tel. +27 (11) 876 5600 Fax +27 (11) 822 2013 E-Mail: sales@ksbpumps.co.za 1311.45/11-EN KSB SE & Co. KGaA Johann-Klein-Straße 9 • 67227 Frankenthal (Germany) Tel. +49 6233 86-0 www.ksb.com
0
advertisement
Download
advertisement
Add this document to collection(s)
You can add this document to your study collection(s)
Sign in Available only to authorized usersAdd this document to saved
You can add this document to your saved list
Sign in Available only to authorized users