Describe the Functionality of Control Builder
Control Builder Introduction
Describe the Functionality of Control Builder
1
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Introduction
• In this lesson you will learn about the
purpose and use of the Control Builder
application
• At the conclusion of this lesson, you will
be able to:
– Open and navigate Control Builder
– Identify the toolbar icons and functionality
– Explain the purpose of the tabs in the
tree windows
– Describe the load functions available
from the Control Builder Project and
Monitoring tabs
Control Builder Introduction
Describe the Functionality of Control Builder
2
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Topics
 Starting Control Builder
 Control Builder Functions
 Control Builder Load Function
Control Builder Introduction
Describe the Functionality of Control Builder
3
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Start Control Builder
Open Configuration Studio
CLICK
Control Builder Introduction
Describe the Functionality of Control Builder
4
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Start Control Builder, contd.
CLICK
Select the server.
Then, select the Connect button.
CLICK
Control Builder Introduction
Describe the Functionality of Control Builder
5
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Start Control Builder, contd.
Log in
Change to
User Name: mngr
Password: mngr1
Domain: <Traditional Operator Security>
Control Builder Introduction
Describe the Functionality of Control Builder
6
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Start Control Builder, contd.
CLICK
Select Control Strategy
Control Builder Introduction
Describe the Functionality of Control Builder
7
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Start Control Builder, contd.
CLICK
Select Configure process control strategies
Control Builder Introduction
Describe the Functionality of Control Builder
8
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Topics
 Starting Control Builder
 Control Builder Functions
 Control Builder Load Function
Control Builder Introduction
Describe the Functionality of Control Builder
9
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Control Builder Toolbar
Not all toolbar icons will be available until
you open Control Builder items
Control Builder Introduction
Describe the Functionality of Control Builder
10
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Control Builder Toolbar, contd.
1 2
3 4 5 6 7 8
1
2
Open Tree Window
Close active Control Drawing
or Tree Window
Move to the Left
Move to the Right
Save the active Control Drawing
Delete the selected object
Copy selection and place on
clipboard
Paste clipboard contents
Print selected pages of active
document
Display program information
3
4
5
6
7
8
9
10
Control Builder Introduction
Describe the Functionality of Control Builder
9 10 11 12 13 14 1516 171819 20 21 22 23
11
12
13
14
15
16
17
18
19
20
21
22
23
24
11
24
Display help information
Point Selection Command
Create a wire for connecting function
blocks
Create a Parameter Connector
Assign Modules to a Control
Execution Environment (CEE)
Module Containment
Load selected items
Upload selected items
Substitute Names
QVCS Manager
Toggle single item state
SCM Navigation
Fieldbus DD import
Change scale dimensions
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Control Builder Status Line
Honeywell
Security level
Experion PKS server name
Control Builder Introduction
Describe the Functionality of Control Builder
12
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Control Builder Tree Windows
3
1
2
1 & 2. Clicking the first Open Tree
Window button will open one
or two tree views. The
second icon will close the
windows.
3. Clicking the Open Library
button will open the Library tree
Control Builder Introduction
Describe the Functionality of Control Builder
13
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Control Builder Tree Windows, contd.
Honeywell
• Tabs appear at the bottom of each tree window
Control Builder Introduction
Describe the Functionality of Control Builder
14
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Control Builder Tabs
• The Project Tab displays the CPM, IOMs, CMs and SCMs in the current
project
• The Project Tab is linked directly to the ERDB in the Experion Server
Control Builder Introduction
Describe the Functionality of Control Builder
15
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Control Builder Tabs, contd.
• The Monitoring Tab:
– Displays all objects loaded to the control
processor module (CPM)
– Permits active modules to be viewed and
controlled during process operations
Control Builder Introduction
Describe the Functionality of Control Builder
16
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Control Builder Monitoring Tab
• To disable the online viewing of
control modules in the monitoring
tab click:
Chart > Disable Chart Monitoring
Control Builder Introduction
Describe the Functionality of Control Builder
17
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Control Builder Tabs
• The Library Tab displays all available system function blocks grouped
into type categories
Control Builder Introduction
Describe the Functionality of Control Builder
18
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Question 1: Control Builder Functions
Control Builder is :
A) An online documentation tool for C200
controllers and Experion PKS servers
B) A tool used only for building graphics
C) A graphical tool used to design control
strategies for C200, C300, ACE and SCE
to save run time data
D) A graphical tool used to view plant graphics
Correct!
Incorrect.
Control
Control
builder
builder
is a isgraphical
a graphical
tooltool
used
The
Your
correct
answer:
answer
is:
to design
used tocontrol
designstrategies
control strategies
for C200,
for
C300,
C200,
ACE
You must answer the question before
C300,
ACE
and
SCE
save
and
run
save
time
data.
time data.
You
Incorrect
Correct
didand
You
not SCE
-answer
answered
-and
Click
Click
anywhere
anywhere
this
this
question
correctly!
to
torun
continue
continue
completely
continuing
Click anywhere to continue.
Submit
Control Builder Introduction
Describe the Functionality of Control Builder
19
Clear
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Topics
 Starting Control Builder
 Control Builder Functions
 Control Builder Load Function
Control Builder Introduction
Describe the Functionality of Control Builder
20
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Control Builder Load Function
Controller
Control Builder Introduction
Describe the Functionality of Control Builder
21
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Control Builder Load Function, contd.
Project / Monitor Tabs
Update
Server
RTDB
Monitor
Tab
Project
Tab
Load
Checkpoint
Windows
Upload
Load (reload)
Save
Controller
Restore
Controller
Control Processor
Control Builder Introduction
Describe the Functionality of Control Builder
22
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Question 2: Load Operation
During the load operation from the Control Builder project tab, control
strategies are downloaded:
A) Only to the C200 controller
B) To C200 memory, the monitor
tab and the server real time database
C) Only to the server real time database
D) Only to the C200 memory and monitor tab
The correct
Your
answer:
answer is:
Correct!
Incorrect.
During
During
the load
the
operation
operation
fromfrom
Control
Control
Builder
You must answer
the load
question
before
You
Incorrect
Correct
did tab,
You
not
-answer
answered
-Click
Click
anywhere
anywhere
this
this
question
correctly!
to
to
continue
continue
completely
project
Builder
project
control
tab,
strategies
control
strategies
are
downloaded
are
downloaded
to
C200
continuing
tomemory,
C200 memory,
the monitor
the monitor
tab andtab
theand
server
the server
real time
real
time
database.
database.
Click anywhere to continue.
Submit
Control Builder Introduction
Describe the Functionality of Control Builder
23
Clear
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Summary
• Control Builder:
a graphical, object-oriented configuration environment in Configuration
– IsStudio
used to design, implement and document control applications
toolbar icons that become available when specific Control Builder items
– Has
are opened
– Has tree window tabs to help you design control applications
• The Project tab displays the CPM, IOMs, CMs and SCMs in the current
project
• The Monitoring tab displays all objects that have been loaded to the
control processor module (CPM) and permits active modules to be
viewed and controlled during process
• The Library tab displays all available system CMs and function blocks
grouped into type categories that can be used to build control strategies
– Control strategies download to C200 memory, the monitor tab and the server
real time database

Control Builder Introduction
Describe the Functionality of Control Builder
24
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Conclusion
Describe the Functionality of Control Builder
Completion
Certificate
Proceed to the next lesson in your course material
Control Builder Introduction
Describe the Functionality of Control Builder
25
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
This page intentionally left blank
Control Builder Introduction
Describe the Functionality of Control Builder
26
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Identify Functionality of Checkpointing and
Compare Parameters
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
27
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Introduction
• In this lesson you will learn the purpose and use of the checkpoint and
compare parameters functions in Control Builder
• At the conclusion of this lesson,
you will know how to:
– Locate the checkpoint file
– Save a checkpoint file
automatically or manually
– Compare system parameters
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
28
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Introduction
• The checkpoint function:
– Allows you to save and restore operational and configuration data
associated with a control strategy
– C300, series CI/O & PM I/O (when used with C300)
– LIOM
– OPC gateway on ACE
– Helps minimize downtime caused by a process or hardware anomaly
• The compare parameters function:
– Allows you to compare the parameters on function blocks in your ERDB with
parameters on the same function blocks loaded on your controller
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
29
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Topics
• Locating the Checkpoint File
• Saving Checkpoint Files
• Checkpoint support
• Comparing System Parameters
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
30
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Checkpoint File Location
• The checkpoint file is created on the local server path
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
31
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Checkpoint File Location, contd.
Checkpoint
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
32
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Question 1: Checkpoint File Location
Where is the Checkpoint File stored?
A) C:\Documents and Settings\All Users\Application
Data\Honeywell\Checkpoint
B) C:\Documents and Settings\All Users\Application
Data\Honeywell\Experion PKS
C) C:\Documents and Settings\All Users\Application
Data\Experion PKS\Checkpoint
D) C:\Documents and Settings\All Users\Application
Data\Honeywell\Experion PKS\Checkpoint
Yourcorrect
The
answer:
answer is:
No.
The
correct
answer
is
No.
The
The the
correct
correct
answer
answer
is
is
You mustYes!
answer
question
before
C:\Documents
and
Settings\All
Users\Application
You
Incorrect
Correct
did
You
not
answer
answered
Click
Click
anywhere
anywhere
this
this
question
correctly!
to
to
continue
continue
completely
C:\Documents and
Settings\All Users\Application
continuing
Data\Honeywell\Experion
Data\Honeywell\Experion PKS\Checkpoint
PKS\Checkpoint
Click
Click anywhere
anywhere to
to continue
continue
Submit
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
33
Clear
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Topics
• Locating the Checkpoint File
• Saving Checkpoint Files
• Checkpoint support
• Comparing System Parameters
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
34
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Automatic Checkpointing
Controller > Checkpoint > Schedule Checkpoint Task
CLICK
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
35
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Automatic Checkpointing
Name task
Select Controller(s)
Assign Controller(s)
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
36
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Saving a Checkpoint File
• A checkpoint file can be saved two ways:
– Automatically
– Manually
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
37
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Automatic Checkpointing
Select automatic
Select interval
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
38
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Automatic Checkpointing
NOTE: The number of versions is grayed
out in this case because the QVCS option
was included with this system.
Add number of versions
to be retained
QVCS only permits 1 version to be retained.
Add comment
CLICK
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
39
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Automatic Checkpointing
• Checkpoint Scheduler
Start
Stop
Refresh Contents
Define task
Edit task
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
40
Delete Task
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Manual Checkpointing
CLICK
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
41
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Question 2: Saving a Checkpoint File
Which statement about saving a checkpoint file is false?
A) If your system has the QVCS option, you will only
be able to save 1 version of the checkpoint file
automatically; otherwise, you can specify the
number of versions to save
B) The checkpoint scheduler shows a list of the
automatic and manual checkpoints that have been
saved
C) You can save a checkpoint file manually for only one
project node
D) When you save a checkpoint file automatically you
must specify the start date, start time and interval
Yourcorrect
The
answer:
answer is:
YouCorrect!
must
answer
the
questionis
No.
No. The
The
The
false
false
false
statement
statement
statement
isbefore
is
YouIncorrect
Correct
did You
not -answer
answered
-Click
Clickanywhere
anywhere
thisthis
question
correctly!
to
tocontinue
continue
completely
"You
"You can
can save
save aacontinuing
checkpoint
checkpoint file
file manually
manually
for
for only
only one
one project
project node."
node."
Click
Click anywhere
anywhere to
to continue.
continue.
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
Submit
42
Clear
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Topics
• Locating the Checkpoint File
• Saving Checkpoint Files
• Checkpoint support
• Comparing System Parameters
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
43
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Checkpoint support for C300, Series C I/O, & PM I/O
Honeywell
• C300 target and save granularity
– C300 CEE with Series A modules supported on C300
– Series C I/O
– PMIO supported on C300
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
44
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
C300 Restore
• Restore from single “C300 Checkpoint file”
C300 selected
“restore C300 & I/0”
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
45
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
C300 and Series A IO Modules Restore
Restore C300
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
46
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Series C IO and PM IO Restore
One or more Series C
IOM(s) selected
“Restore IOM(s)”
One or more PM
IOP(s) selected
“Restore IOP(s)”
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
47
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
C200 and Series A IO Modules Restore
• C200 Save
– Series A I/O
– PM IO
C200
Series A I/O
C200_latest.cp or previously saved
compatible file
PM IO
C200 selected
“restore C200 & I/0”
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
48
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
LIOM Checkpoint Support
• LIOM Controller
– Redundant or Non-Redundant configuration
– LIOM Block, the LIOM CEE, 621 IOMs, and its contained CMs
Save / restore
Latest.cp
LIOM
621 IOM
621 IOM
621 IOM
621 IOM
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
49
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
OPC Gateway Checkpoint Support
• The OPC Gateway is a CPM-like Function Block that resides on an ACE
Node and provides configuration parameters necessary for OPC
connections from ACE CEEs.
• If the ACE Node that hosts the OPC gateway should fail, the OPC
Gateway Checkpoint file can be used to restore these configuration
parameters.
OPC gateway
ACE
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
Restore
50
OPC Gateway latest.cp
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Detail Display
Honeywell
• The System Status Display supports direct navigation to the detail
display for a selected node
– Checkpoint save and restore operations from the checkpoint TAB in the
detail display
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
51
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Question 3: Checkpoint Functions
Which of the following statements is true about Checkpoints?
A) C300 checkpoints are stored in a single file
B) PM and Series C IOM can be restored individually,
when connected to C300
C) C200 checkpoints if used, restores the C200 and all
IOMs
D) Series A I/O connected to C300 cannot be restored
individually
E) All of the above
Yourcorrect
The
answer:
answer is:
Yes!
No. All
All of
of the
the above
above statements
statements are
are true
true
You must answer
the question before
about
Checkpoints.
YouIncorrect
Correct
did You
not -answer
answered
-Click
Clickanywhere
anywhere
thisthis
question
correctly!
to
tocontinue
continue
completely
continuing
Click anywhere to continue.
Submit
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
52
Clear
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Topics
• Locating the Checkpoint File
• Saving Checkpoint Files
• Checkpoint support
• Comparing System Parameters

Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
53
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Using Compare Parameters
Tools > System Preferences
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
54
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Compare Parameters
CM_FV101RC loading from Project tab
Uncheck if PVHIALM is to remain at 87 in C200, and then be sure
to perform an Upload to Monitoring and an Update to Project!
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
55
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Question 4: Comparing Parameters
When the Compare Parameters function is active:
A) The Compare Parameters checkbox in the
Tools > System Preferences window is checked
B) Control Builder will inform you of any parameter
discrepancies between the control module you are
loading and the control module which resides on the
controller
C) Control Builder will give you the option to keep
certain parameter values on the controller or
overwrite them with new values
D) All of the above
The correct
Your
answer:
answer is:
Yes!
No.You
All
Allmust
these
theseanswer
statements
statements
are
are correct
correct
when
when the
the
the question
before
YouIncorrect
Correct
did You
not -answer
answered
-Click
Clickanywhere
anywhere
thisthis
question
correctly!
to
tocontinue
continue
completely
Compare Parameters
function is active.
continuing
Click anywhere to continue.
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
Submit
56
Clear
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Summary
• The Checkpoint function in Control Builder:
– Saves and restores operational and configuration data
– Speeds recovery from process or hardware anomalies
– Can be done manually or automatically at set intervals
• The Compare Parameters function in Control Builder:
parameters from function blocks in your ERDB with parameters
– Compares
from function blocks in your controller, giving you the opportunity to keep or
write over existing values
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
57
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Conclusion
Identify Functionality of Checkpointing
& Compare Parameters
Completion
Certificate
Proceed to the next lesson in your course material
Control Builder Introduction
Identify Functionality of Checkpointing and Compare Parameters
58
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Describe How to Locate CB Concepts in KB
Control Builder Introduction
Describe How to Locate CB Concepts in KB
59
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Introduction
• In this lesson you will learn to locate
information about Control Builder
components in Knowledge Builder
• At the conclusion of this lesson, you will
know how to:
– Find function block information and
theory in Knowledge Builder
– Find parameter information in
Knowledge Builder
Control Builder Introduction
Describe How to Locate CB Concepts in KB
60
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Knowledge Builder Location
Control Builder Introduction
Describe How to Locate CB Concepts in KB
61
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Function Blocks in Knowledge Builder
Honeywell
Experion PKS R300.0 > Reference > Control Builder Components Theory >
Regulatory Control > Regulatory Control Blocks
Control Builder Introduction
Describe How to Locate CB Concepts in KB
62
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
PID Block Theory
Experion PKS R300.0 > Reference > Control Builder Components Theory >
Regulatory Control > PID Block
PID
Theory
Control Builder Introduction
Describe How to Locate CB Concepts in KB
63
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Parameter Reference
Experion PKS R300.0 > Reference > Control Builder Parameter Reference
Control Builder Introduction
Describe How to Locate CB Concepts in KB
64
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Question 1: Knowledge Builder Parameter Information
Honeywell
Where can you find information in Knowledge Builder for the CVEUHI
parameter on a PID function block?
A) Experion PKS> Reference> Control Builder
Components Reference> CXXXX Parameters
B) Experion PKS> Reference> Control Builder
Components Theory> CXXXX Parameters
C) Experion PKS> Reference> Control Builder
Parameter Reference> CXXXX Parameters
D) None of the above
No.
The correct
find information for the CVEUHI
The
Your
correct
answer:
answerpath
is: to
Yes!
No.
The
The correct
correct
path
path
to
to find
find information
information for
for the
the CVEUHI
CVEUHI
parameter
onanswer
a PIDA the
function
block
in Knowledge Builder is
You
must
question
before
parameter
a
PIDA
function
block
in Knowledge Builder is
YouExperion
Incorrect
Correct
did You
noton
-answer
answered
-Click
Click
anywhere
anywhere
this
this
question
correctly!
to
to
continue
continue
completely
PKS>
Reference>
Control
Builder Parameter
Experion PKS>continuing
Reference> Control Builder Parameter
Reference> CXXXX Parameters
Reference> CXXXX Parameters
Click anywhere to continue.
Click anywhere to continue.
Control Builder Introduction
Describe How to Locate CB Concepts in KB
Submit
65
Clear
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Summary
• Read Knowledge Builder to learn about the components you will use to
create control modules including:
block information and theory
– Function
(Experion PKS R300.0 > Reference > Control Builder Components Theory >
Regulatory Control)
information
– Parameter
(Experion PKS R300.0 > Reference > Control Builder Parameter Reference)
Control Builder Introduction
Describe How to Locate CB Concepts in KB
66
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
Conclusion
Describe How to Locate CB Information in KB
Completion
Certificate
Proceed to the Open and Operate Control Builder lab exercise
Control Builder Introduction
Describe How to Locate CB Concepts in KB
67
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013
Honeywell
This page intentionally left blank
Control Builder Introduction
Describe How to Locate CB Concepts in KB
68
EXP20R300 - EPKS CEE C200/C300/ACE
11/28/2013