O’Kane Page 1
Lab #1 Circuit Theory 2
Equipment, Documentation and Lab
Familiarization
Eamonn O’Kane
Bench #19
EECE – 2080.802
Circuit Theory 2 Lab 2
Date Submitted:
Due Date: 2/16/14
I. Summary/Abstract
O’Kane Page 2
Condensed format not required; N/A
II. Equipment
Table 1. Equipment Used
Equipment Type
•
•
•
•
•
Bench-Top Digital
Multimeter
Hand-Held Digital
Multimeter
Oscilloscope
Dual Power Supply
Function Generator
Analog Discovery 3
Details
Make:
Keithley
Model:
2110 5 ½ Digital Multimeter
Serial
Number:
8006812
Make:
Tenma
Model:
72-9385
Serial
Number:
0723/000165
Make:
Keysight
Model:
MSO-X 2004A
Serial
Number:
CN63311337
Make:
Gwinstek
Model:
GPD-3303D
Serial
Number:
EM823313
Make:
Tektronix
Model:
AFG1022
Serial
Number:
1731882
Make:
Diligent
Model:
410-415_C
O’Kane Page 3
DB99F53
Serial
Number:
•
•
Breadboard
Bench “Shoebox”
with
•
included cables,
alligator clips, and
other items needed to
bridge connections
Safety Glasses
•
Soldering Kit
N/A
Table 2. Components Used
Component Type
Quantity
Details
No material components were used in this lab
III Introduction
Not required for condensed format N/A
O’Kane Page 4
IV. Circuit Description
This circuit incorporates both series and parallel connections for three
resistors used. The 2.2k and 1k ohm resistors are in parallel with the 3.3k ohm resistor.
This circuit is similar to the previous circuit, however, this circuit alters the placement of the
previous resistors by placing the 3.3 k ohm and 1.1k ohm resistors in series before connecting the
2.2k ohm resistor in parallel.
O’Kane Page 5
This circuit adds an additional resistor into the first parallel branch, leading to two branches with
two resistors in series.
Lastly, this circuit has a combination of parallel and series resistors, with a series combination in
parallel with the 1k ohm and 2.2k ohm resistors.
V. Measurement Results
Need photos and error analysis only
VI. Discussion
Needed
VII. Conclusion
Needed
VIII. Questions
Not required for condensed format; N/A
References
Bowden, D.A. (2022). EECE.2070 Lab #4 – Series and Parallel DC Circuits. University of
Massachusetts, Lowell, Lowell, MA.
Bowden, D. A. (2022). Electrical and Computer Engineering Laboratory Requirements
and Safety Manual. University of Massachusetts, Lowell, Lowell, MA.
O’Kane Page 6
Boylestad, R. L. (2007). Laboratory Manual to Accompany Introductory Circuit
Analysis. (11th ed.). Pearson, NJ