Q1. What is the physical meaning of the Fermi
level in a semiconductor?
A1. It represents the energy at which the
probability of occupancy = 50%; it sets the balance
between electron and hole concentrations.
Q2. Why is the probability of occupation at EF
always 0.5?
A2. Because in f(E)=1/(1+e^(E−EF)/kT), if E=EF,
the exponent = 0 → f=0.5.
Q3. How does increasing temperature affect the
sharpness of the Fermi–Dirac distribution?
A3. It broadens; the step-like shape at EF
becomes smoother, so higher-energy states are
more likely to be occupied.
Q4. Why does the Fermi level shift upward for
n-type and downward for p-type doping?
A4. Donors add electrons → Fermi moves closer
to conduction band; acceptors add holes → Fermi
moves closer to valence band.
Q5. Where is the intrinsic Fermi level located?
How does effective mass asymmetry shift it?
A5. Near midgap. If me*=mh*, exactly at midgap. If
not, it shifts toward the band with the lighter mass.
Q6. Why does the DOS in 3D increase as
√(E−EC)?
A6. Because the number of states grows with k^2,
and E∝k^2, leading to √E dependence.
Q7. What is the role of effective mass in
determining DOS?
A7. Larger effective mass → denser states (bigger
NC, NV).
Q8. Why do NC and NV increase with
temperature?
A8. Because NC, NV ∝ T^(3/2).
Q9. If me* >> mh*, which way does Ei shift?
A9. Toward the conduction band (lighter holes
dominate).
Q10. What does negative effective mass mean?
A10. Electrons near the valence band maximum
behave as if they have negative mass →
equivalent to holes with positive mass.
Q11. Simplified expressions for n and p under MB
approximation?
A11. n=NC exp(-(EC−EF)/kT), p=NV
exp(-(EF−EV)/kT).
Q12. Why MB approx valid only when |E−EF| >
3kT?
A12. Because then f(E)<<1 and the exponential
dominates, making FD≈MB.
Q13. How does donor doping change
conduction-band electron concentration?
A13. It increases n roughly equal to donor
concentration (full ionization).
Q14. What happens to hole concentration when
electron concentration increases due to doping?
A14. It decreases, since np=ni^2.
Q15. Why is n0p0=ni^2 always satisfied?
A15. Because it comes from band properties only
(NC,NV,Eg) and is independent of EF.
Q16. Why are intrinsic semiconductors poor
conductors at room T?
A16. Because ni is very low → very few free
carriers.
Q17. Relationship between Eg and ni?
A17. ni ∝ exp(−Eg/2kT); larger bandgap →
exponentially smaller ni.
Q18. Why is ni higher for Ge than Si?
A18. Ge has a smaller bandgap (~0.66 eV vs 1.12
eV).
Q19. How does temperature affect ni?
A19. ni increases rapidly with T (both from T^(3/2)
and exponential).
Q20. Physical meaning of exp(−Eg/2kT)?
A20. Probability of an electron being thermally
excited across half the bandgap.
Q21. Difference between donors and acceptors?
A21. Donors provide extra electrons (levels near
EC). Acceptors create holes (levels near EV).
Q22. Why are donor levels near EC and acceptors
near EV?
A22. To allow easy thermal ionization at room T
with minimal energy.
Q23. What happens if equal donors and acceptors
are added?
A23. They compensate → net carrier type depends
on which is greater. If equal, intrinsic-like.
Q24. Define majority and minority carriers.
A24. Majority: carriers added by doping. Minority:
the opposite type, present due to thermal
excitation.
Q25. Why does the Fermi level move toward EC in
heavily n-type materials?
A25. Because high electron concentration requires
EF closer to conduction band to satisfy occupancy.
Q26. Write charge neutrality condition.
A26. n0 + NA− = p0 + ND+.
Q27. In donors+acceptors case, what decides
type?
A27. The net dopant concentration (ND−NA).
Q28. Why does adding acceptors to n-type reduce
electron concentration?
A28. Acceptors capture electrons → reduce free
electrons, increase holes.
Q29. How does charge neutrality explain minority
carrier change?
A29. When majority carriers increase, neutrality
requires minority carriers to decrease.
Q30. What happens to EF if ND=NA?
A30. Carriers balance → Fermi level returns close
to intrinsic level (near midgap).
Q31. What happens to n in n-type as T increases?
A31. Stays ~ND at moderate T, but rises sharply at
high T when intrinsic carriers dominate.
Q32. Why does EF move toward midgap at high
T?
A32. Because intrinsic carriers dominate →
material behaves intrinsic.
Q33. Three regimes of n-type vs T?
A33. Freeze-out (low T), Extrinsic (moderate T),
Intrinsic (high T).
Q34. Why do intrinsic carriers dominate at very
high T?
A34. Thermal energy is large enough to excite
many e−h+ pairs across the gap.
Q35. At low T, why might not all dopants ionize?
A35. Not enough thermal energy to excite
electrons from donor level into conduction band.
Q36. Why is bandgap critical for electrical
properties?
A36. It sets how easily carriers are thermally
excited → controls conductivity.
Q37. Why do wide-bandgap semiconductors
(GaAs) have small ni?
A37. Large Eg makes thermal excitation across the
gap extremely unlikely.
Q38. How does doping improve conductivity?
A38. Increases carrier concentration by orders of
magnitude compared to intrinsic ni.
Q39. DOS as “seats” analogy?
A39. DOS = number of seats; Fermi–Dirac =
chance each seat is occupied. Multiply → number
of carriers.
Q40. Why is Fermi level essential for device
design?
A40. It determines carrier concentrations, junction
behavior, and current flow.