EEFE 512 Applied Microeconomic Theory
Instructor: Ruohao Zhang, Ph.D.
Assistant Professor of Agricultural Economics
Fall 2025, Pennsylvania State University
Office Hours: Tuesday/Thursday 12:00 p.m. – 1:00 p.m., or by email
appointment
Email: rjz5261@psu.edu
Office Location: 104 Ferguson Building, University Park
Section 1: Production Theory
1
Production and Technology
2
Profit Function and Maximization
3
Cost Function and Minimization
4
Duality
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
2/20
Lecture 1: Production and Technology
Varian Chapter 1, MWG Chapter 5A - 5B
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
3/20
Lecture 1: Production and Technology
A production plan: a net output bundle y = (y1 , y2 , ..., yn ) ∈ Rn
net input: yi < 0
net output: yi > 0
we usually relabel net input yi < 0 as −xi
The production probability set: Y ∈ Rn , a set of all technologically
feasible production plans y’s
Example 1.1: y = (orange, bottle, juice), suppose it is technologically
feasible to use three oranges and one bottle to produce up to one bottle
of juice, then we have:
(−3, −1, 1) ∈ Y
(−6, −2, 2) ∈ Y
(−4, −2, 1) ∈ Y
(−3, −1, 2) ∈
/Y
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
4/20
Lecture 1: Production and Technology
Short-run v.s. Long-run technology: In the short run, the amount of
some inputs may be fixed, which restricts the firm’s output.
We use a vector z ∈ Rn to denote such restrictions.
Y (z) is short-run production possibilities set, a subset of Y
If the short-run restriction is yn = ȳn , then Y (ȳn ) = {y in Y : yn = ȳn }
In Example 1.1, (−6, −2, 2) ∈
/ Y (orange = 4)
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
5/20
Lecture 1: Production and Technology
Consider a net output bundle (y, −x), x is a vector of inputs.
n
Input Requirement Set: V (y) = {x ∈ R+
: (y, −x) is in Y )}
V (y) is the set of all input bundles x that produce at least y output.
Monotonicity: If x is in V (y) and x’ > x, then x’ is in V (y) (free disposal)
isoquant is similar to IC for consumtion, but this is for production.
Isoquant: all input bundles that produce exactly y units of outputs.
n
: x is in V (y) but not in V (y ′ ) for all y ′ > y}
Q(y) = {x ∈ R+
In Example 1.1, let x = (6, 2), x’ = (9, 3)
x ∈ V (2), x ∈ Q(2)
x’ ∈ V (2), x’ ∈
/ Q(2)
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
6/20
Lecture 1: Production and Technology
Production Function: f (x) = {y ∈ R : y is the maximum output given x}
Transformation Function: T (y) = y − f (x) ≤ 0 (Rn → R), where
T (y) = 0 if and only if y is efficient
Leontief technology: f (x1 , x2 ) = min(ax1 , bx2 ) (i.e., orange juice)
Cobb-Douglas technology: f (x1 , x2 ) = xa1 x1−a
(i.e., labor and capital)
2
Linear technology: f (x1 , x2 ) = ax1 + bx2
Question: draw the isoquants of three types of technologies with two
inputs.
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
7/20
Lecture 1: Production and Technology
Convexity Technologies: If x and x’ are in V (y), then tx + (1 − t)x’ is
also in V (y) for all 0 ≤ t ≤ 1.
Convex production set Y implies convex input requirement set V (y).
Convex V (y) is equivalent to quasiconcave production function f (x).
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
8/20
Lecture 1: Production and Technology
Some Mathematics Background:
Convex sets: for any x and x’ are in a set X, we must have tx + (1 − t)x’
in set X for all 0 ≤ t ≤ 1.
Figure: convex and nonconvex sets
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
9/20
Lecture 1: Production and Technology
Some Mathematics Background:
Concave, Quasiconcave, Convex, and Quasiconvex functions
Quasiconcave: f (tx + (1 − t)x’) ≥ min(f (x), f (x’))
Quasiconvex: f (tx + (1 − t)x’) ≤ max(f (x), f (x’))
Concave function: f(λx+(1ÿ λ)y)≥λf(x)+(1ÿ λ)f(y).
Figure: concave and quasiconcave functions
Question: how about convex and quasiconvex functions? Flip everything!
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
10/20
Lecture 1: Production and Technology
Some Mathematics Background:
Upper contour set: V (y) = {x, f (x) > y}
Figure: upper contour sets, one/two dimensional cases
it is convex
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
11/20
Lecture 1: Production and Technology
Some Mathematics Background:
Definition/Theorem: A function is quasiconcave if and only if all of its
upper contour sets are convex.
Figure: a counterexample
Question: prove this theorem mathematically.
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
12/20
Lecture 1: Production and Technology
Some Mathematics Background:
Theorem: f (x) is a quasiconcave function if and only if V (y) is convex
for all y.
Proof
Necessary: For any x and x’ that f (x) ≥ y and f (x’) ≥ y, x and x’
are in the upper contour set V (y). Since f (x) is quasiconcave, then
we must have f (tx + (1 − t)x’) ≥ min(f (x), f (x’)). This implies
f (tx + (1 − t)x’) ≥ y, tx + (1 − t)x’ is also in V (y). Therefore,
V (y) is convex.
Sufficient: If V (y) is convex for all y, then for any x and x’ that
f (x) ≤ f (x’), V (f (x)) is convex. This implies, since x and x’ are in
V (f (x)), we must have:
tx + (1 − t)x’ ∈ V (f (x)) ⇔ f (tx + (1 − t)x’) ≥ f (x) ⇔
f (tx + (1 − t)x’) ≥ min(f (x), f (x’)) ⇔ f (x) is quasiconcave.
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
13/20
Lecture 1: Production and Technology
Regular Technologies: V (y) is a closed, nonempty set for all y ≥ 0,
input requirement set must include the boundary.
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
14/20
Lecture 1: Production and Technology
Technical Rate of Substitution: for a production function f (x1 , x2 ),
suppose we want to increase x1 and decrease x2 to maintain same productivity level: f (x1 , x2 (x1 )) ≡ y.
If marginally change x1, how x2 must change.
∂x2 (x1 )
TRS =
, also the slope of the isoquant.
∂x1
Derivation of TRS: Derivative of f respect to x1
∂f (x1 , x2 ) ∂f (x1 , x2 ) ∂x2 (x1 )
+
= 0, change rule
∂x1
∂x2
∂x1
∂x2 (x1 )
∂f (x1 , x2 )/∂x1
=−
.
∂x1
∂f (x1 , x2 )/∂x2 partial derivative
Question: derive TRS for Cobb-Douglas technology. a/B . (x2/x1)
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
15/20
Lecture 1: Production and Technology
How fast the slope change
Elasticity of Substitution: holding output constant, the percentage change
in input ratio divided by the percentage change in TRS.
σ=
d(x2 /x1 )
x2 /x1
dT RS
T RS
=
T RS d(x2 /x1 )
, also the curvature of the isoquant.
x2 /x1 dT RS
Calculate elasticity:
dlnx = dx/x
σ=
dln(x2 /x1 )
dln|T RS|
Larger elasticity means relatively less curvature in the isoquant.
Questions:
When do we have infinite elasticity? Linear tech
When do we have zero elasticity? Leon tief
Derive the elasticity of substitution for Cobb-Douglas technology.
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
16/20
Lecture 1: Production and Technology
Returns to Scale: if we scale all the input up/down by some amount t,
what will happen to the amount of output?
Constant Returns to Scale: f (tx) = tf (x) for all t ≥ 0. The
production function is homogeneous of degree 1.
Increasing Returns to Scale: f (tx) > tf (x) for all t ≥ 1.
Decreasing Returns to Scale: f (tx) < tf (x) for all t ≥ 1.
Questions:
When do we have constant/increasing/decreasing returns to scale?
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
17/20
Lecture 1: Production and Technology
Homogeneous and Homothetic Technologies :
If f (tx) = tk f (x) for all t > 0, then f (x) is homogeneous of degree
k.
Increasing : The output change faster than input change
A homothetic function is a monotonic transformation of a function
that is homogeneous degree of 1.
All homogeneous functions are homothetic, but the reverse is not
true (i.e., f (x) = x + 2.) this is not homogeneous but is homothetic, cuz is
monotonic transformation. tf(x)=tx+t /= f(tx)=tx+1
(x)
Homogeneity: If f (x) is homogeneous degree of k ≥ 1, then ∂f
∂xi is
homogenous degree of k − 1.
df(tX)/dx_i = [df(tX)/dftx_i].t
Dr. Ruohao Zhang.
d is ro!
EEFE 512, Pennsylvania State University, Fall 2024
18/20
Lecture 1: Production and Technology
Constant Elasticity of Substitution (CES) Production Function:
1
f (x1 , x2 ) = [a1 xρ1 + a2 xρ2 ] ρ .
T RS = −(
x1 ρ−1
) ,
x2
The elasticity σ =
1
, which is contant. when you move along isoquant
1−ρ
When ρ = 1, then CES is a linear production function, σ → ∞.
When ρ → 0, then the isoquant of CES converges to Cobb-Douglas
(with the same TRS, but CES function itself is not defined when
ρ = 0).
When ρ = −∞, then the isoquant of CES converges to Leontif
(with the same TRS), σ → 0.
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
19/20
Lecture 1: Production and Technology
Homework: Varian 1.2, 1.8, 1.9, 1.10, 1.11
Deadline: 4:35 PM, Sepember 4
Next Tuesday sept 9
Dr. Ruohao Zhang.
EEFE 512, Pennsylvania State University, Fall 2024
20/20