Lecture 35: Friction
Department of Civil and
Environmental Engineering
1
Friction
(part 2)
Lecture 35: Friction (part 2)
2
1
Friction
Objectives:
a)
Introduce the concept of dry friction
b)
Analyze the equilibrium of rigid bodies subjected
to this frictional force
Lecture 35: Friction (part 2)
3
Sliding versus
Tipping
•
In the previous class we implicitly
assumed that the block will slide
before tipping
•
The block may, however, tip
before it slides so we need to
check which will happen first
Lecture 35: Friction (part 2)
4
2
Critical Sliding Force
If the block is about to slide then
F s N
Writing the equilibrium equations
F 0
y
N W 0
Fx 0
P s N 0
Lecture 35: Friction (part 2)
5
Critical Sliding Force
M 0
O
Ph Wx 0
Solve for N, P, and x
If
xb 2
then the block will slide before it
tips
Lecture 35: Friction (part 2)
6
3
Critical Tipping Force
If the block is about to tip then
xb 2
Writing the equilibrium equations
F 0
y
N W 0
Fx 0
PF 0
Lecture 35: Friction (part 2)
7
Critical Tipping Force
M 0
O
Ph W b 2 0
Solve for P, F, and N
If
F s N
then the block will tip before it
slides
Lecture 35: Friction (part 2)
8
4
Example Problem
Determine the maximum force
P that can be applied without
causing movement of the 250
lb crate. The centre of gravity
of the crate is at G, and the
coefficient of static friction
between the floor and the
crate is µs = 0.4.
Lecture 35: Friction (part 2)
9
Example Problem
Blocks A and B have masses of 7 kg and 10 kg
respectively. Using the indicated coefficients of static
friction, determine the largest force P that can be applied
to the cord without causing motion. The cord passes over
smooth pulleys at C and D.
Lecture 35: Friction (part 2)
10
5
Lecture Recap
Read part of Chapter 8
•
•
•
Sections 8.1 and 8.2
Work through examples in
the text
•
Examples 8.1-8.5
Lecture 35: Friction (part 2)
11
6