- No category
ASTM Standards: Nondestructive Testing Methods
advertisement
ASTM Acoustic Emission Method E1106-12(2021) Standard Test Method for Primary Calibration of Acoustic Emission Sensors E2191/E2191M-16 Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Ac E1930/E1930M-17 Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks E2863-17 Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pr E1067/E1067M-18 Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks E2907/E2907M-13(2019) Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack F E2983-14(2019) Standard Guide for Application of Acoustic Emission for Structural Health Monitoring E569/E569M-20 Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation E750-15(2020) Standard Practice for Characterizing Acoustic Emission Instrumentation E1118/E1118M-16(2020) Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (R E1419/E1419M-15a(2020) Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Em E2075/E2075M-15(2020) Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod E2661/E2661M-20e1 Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structur E1781/E1781M-20 Standard Practice for Secondary Calibration of Acoustic Emission Sensors E976-15(2021) Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response E2374-16(2021) Standard Guide for Acoustic Emission System Performance Verification E749/E749M-17(2021) Standard Practice for Acoustic Emission Monitoring During Continuous Welding E2984/E2984M-21 Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping usin E2598/E2598M-21 Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dry E1736-15(2022) Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels E751/E751M-17(2022) Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding E1932-12(2022) Standard Guide for Acoustic Emission Examination of Small Parts E2076/E2076M-15(2022) Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Em E2478-11(2022) Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) E3100-22 Standard Guide for Acoustic Emission Examination of Concrete Structures E650/E650M-24 Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors E1139/E1139M-17(2025) Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Bounda E1495/E1495M-17(2025) Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Join E1211/E1211M-17(2025) Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Se E1888/E1888M-17(2025) Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fibergla Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) E3267-21 Standard Guide for Building Information Models and Archiving for Digital Imaging and Communication in Nonde E3169-18 Standard Guide for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) E1454-02(2008) Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data (Withdrawn 2 E2339-21 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) E1475-13(2023) Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data E2738-23 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Compute E2934-23 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Cur E2699-23 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital X- E2767-24e1 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray C E3440-24 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Thermog E3463-25 Standard Practice for Evaluating DICONDE Interoperability for Image and Presentation State Display E3147-25 Standard Practice for Evaluating DICONDE Interoperability of Nondestructive Testing and Inspection Systems E2663-25 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasoni Editorial Review E1316-25b Standard Terminology for Nondestructive Examinations Electromagnetic Method E2905/E2905M-20 Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods E426-16(2021) Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Produ E376-19 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing E2337/E2337M-10(2015) Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in E1033-13 Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferrom E703-20 Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals E1571-21 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope E2261/E2261M-17(2021) Standard Practice for Examination of Welds Using the Alternating Current Field Measurement T E3052-21 Standard Practice for Examination of Carbon Steel Welds Using An Eddy Current Array E2096/E2096M-22 Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field E2884-22 Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays E2338-22 Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Re E215-22 Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tu E2928/E2928M-23 Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurem E1004-23 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Metho E566-24 Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals E243-24 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes E571-24 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products E309-24 Standard Practice for Eddy Current Examination of Steel Tubular Products E1312-24 Standard Practice for Electromagnetic (Eddy Current) Examination of Ferromagnetic Cylindrical Bar Product Abo E570-25 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products E1606-25 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Ele E1629-12(2025) Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes E690-25 Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes Leak Testing Method E2930-13(2021) Standard Practice for Pressure Decay Leak Test Method E2024/E2024M-11(2019) Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector E479-91(2006) Standard Guide for Preparation of a Leak Testing Specification (Withdrawn 2014) E427-95(2006) Standard Practice for Testing for Leaks Using the Halogen Leak Detector(Alkali-Ion Diode) (Withdrawn 201 E432-91(2022) Standard Guide for Selection of a Leak Testing Method E493/E493M-11(2022) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing M E498/E498M-11(2022) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer i E908-98(2022) Standard Practice for Calibrating Gaseous Reference Leaks E515-11(2022) Standard Practice for Leaks Using Bubble Emission Techniques E1002-11(2022) Standard Practice for Leaks Using Ultrasonics E1003-13(2022) Standard Practice for Hydrostatic Leak Testing E1603/E1603M-11(2022) Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Re E1066/E1066M-19(2024) Standard Practice for Ammonia Colorimetric Leak Testing E499/E499M-11(2025) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mo Liquid Penetrant and Magnetic Particle Methods E709-21 Standard Guide for Magnetic Particle Testing E1219-21 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process E1208-21 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process E1220-21 Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process E1418-21 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process E1210-21 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process E1209-18 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process E1417/E1417M-21e1 Standard Practice for Liquid Penetrant Testing E3024/E3024M-22a Standard Practice for Magnetic Particle Testing for General Industry E2297-23 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magneti E125-63(2023) Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings E433-71(2023) Standard Reference Photographs for Liquid Penetrant Inspection E165/E165M-23 Standard Practice for Liquid Penetrant Testing for General Industry E1135-19(2024) Standard Test Method for Comparing the Brightness of Fluorescent Penetrants E1444/E1444M-25 Standard Practice for Magnetic Particle Testing for Aerospace E3022-25 Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Nondestructive Testing Agencies E1212-17 Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies E543-21 Standard Specification for Agencies Performing Nondestructive Testing E1359-17(2024) Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies Radiology (Neutron) Method E803-20 Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams E748-19 Standard Guide for Thermal Neutron Radiography of Materials E1496-05(2010) Standard Test Method for Neutron Radiographic Dimensional Measurements (Withdrawn 2012) E2023-22 Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators E3398-23 Standard Guide for Digital Neutron Radiography E545/E545M-25 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examinati E2003-20(2025) Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators E2861-16(2025) Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beam E2971-16(2025) Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Abso Radiology (X and Gamma) Method E1165-20 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging E1453-20 Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data E1114-20 Standard Test Method for Determining the Size of Iridium-192, Cobalt-60, and Selenium-75 Industrial Radiograp E1161-21 Standard Practice for Radiographic Examination of Semiconductors and Electronic Components E1030/E1030M-21 Standard Practice for Radiographic Examination of Metallic Castings E1025-18 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Ind E1032-19 Standard Practice for Radiographic Examination of Weldments Using Industrial X-Ray Film E1441-19 Standard Guide for Computed Tomography (CT) E1570-19 Standard Practice for Fan Beam Computed Tomographic (CT) Examination E2698-18e1 Standard Practice for Radiographic Examination Using Digital Detector Arrays E1935-97(2019) Standard Test Method for Calibrating and Measuring CT Density E1672-12(2020) Standard Guide for Computed Tomography (CT) System Selection E2445/E2445M-20 Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Syste E1390-21 Standard Specification for Illuminators Used for Viewing Industrial Radiographs E1079-21 Standard Practice for Calibration of Transmission Densitometers E801-21 Standard Practice for Controlling Quality of Radiographic Examination of Electronic Devices E2597/E2597M-22 Standard Practice for Manufacturing Characterization of Digital Detector Arrays E2002-22 Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Radiography and Radiosco E2104-22 Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components E1695-20e1 Standard Test Method for Measurement of Computed Tomography (CT) System Performance E1931-16(2022) Standard Guide for Non-computed X-Ray Compton Scatter Tomography E142-92 Method for Controlling Quality of Radiographic Testing (Withdrawn 2000) E1647-16(2022) Standard Practice for Determining Contrast Sensitivity in Radiology E1817-08(2022) Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Ind E2662-15(2022) Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials U E2736-17(2022) Standard Guide for Digital Detector Array Radiography E94/E94M-22 Standard Guide for Radiographic Examination Using Industrial Radiographic Film E3375-23 Standard Practice for Cone Beam Computed Tomographic (CT) Examination E1416-23 Standard Practice for Radioscopic Examination of Weldments E1254-13(2023) Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films E1815-18(2023) Standard Test Method for Classification of Film Systems for Industrial Radiography E2007-10(2023) Standard Guide for Computed Radiography E1734-23 Standard Practice for Radioscopic Examination of Castings E3388-23 Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Radiography and Radiosco E2737-23 Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability E746-23 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems b E1255-23 Standard Practice for Radioscopy E1411-23 Standard Practice for Qualification of Radioscopic Systems E1742/E1742M-23 Standard Practice for Radiographic Examination E747-24 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators E1735-19(2024) Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Sy E2446-24 Standard Practice for Manufacturing Characterization of Computed Radiography Systems E2033/E2033M-24 Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Lumin E1000-24 Standard Guide for Radioscopy E2903-18(2024) Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tu E999-20(2025) Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing E1814-25 Standard Practice for Computed Tomographic (CT) Examination of Castings E3505-25 Standard Practice for Direct Determination of Computed Tomography (CT) Detail Detection Sensitivity and Calc Reference Radiological Images E192-20 Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications E446-20 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness E390-20 Standard Reference Radiographs for Steel Fusion Welds E1955-20 Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM Reference E3168-20a Standard Practice for Determining Low-Contrast Visual Acuity of Radiographic Interpreters E280-21 Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings E310-21 Standard Reference Radiographs for Tin Bronze Castings E2869-17 Standard Digital Reference Images for Magnesium Castings E155-20 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings E1648-20 Standard Reference Radiographs for Examination of Aluminum Fusion Welds E242-15(2020) Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters are Chan E1936-20 Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems E592-20 Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Film Radiography of Steel Plates 14 E1320-20 Standard Reference Radiographs for Titanium Castings E689-20 Standard Reference Radiographs for Ductile Iron Castings E186-20 Standard Reference Radiographs for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings E802-21 Standard Reference Radiographs for Gray Iron Castings Up to 412 in. (114 mm) in Thickness E272-21 Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings E3185-21 Standard Digital Reference Images for Tin Bronze Castings E431-96(2022) Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices E505-22 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings E2973-22 Standard Digital Reference Images for Inspection of Aluminum and Magnesium Die Castings E2422-22 Standard Digital Reference Images for Inspection of Aluminum Castings E2660-22 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications E2669-22 Standard Digital Reference Images for Titanium Castings E2868-22 Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness E3030-19e1 Standard Digital Reference Images for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings E3184-24 Standard Digital Reference Images for High-Strength Copper-Base and Nickel-Copper Alloy Castings E3421-24 Standard Digital Reference Images for Appearances of Radiographic Images as Certain Parameters are Changed E3420-24 Standard Digital Reference Images for Aluminum Fusion Welds E3419-24 Standard Digital Reference Images for Steel Fusion Welds Specialized NDT Methods E2982-21 Standard Guide for Nondestructive Examination of Thin-Walled Metallic Liners in Filament-Wound Pressure Ves E3023-21 Standard Practice for Probability of Detection Analysis for â Versus a Data E2533-21 Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in Aerospace Applications E2981-21 Standard Guide for Nondestructive Examination of Composite Overwraps in Filament Wound Pressure Vessels U E2582-21 Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace E3101-18 Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints E3102-18 Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints Used in Piping Application E3166-20e1 Standard Guide for Nondestructive Examination of Metal Additively Manufactured Aerospace Parts After Bui E3327/E3327M-21 Standard Guide for the Qualification and Control of the Assisted Defect Recognition of Digital Radiogra E3045-22 Standard Practice for Crack Detection Using Vibroacoustic Thermography E3353-22 Standard Guide for In-Process Monitoring Using Optical and Thermal Methods for Laser Powder Bed Fusion E1476-04(2022) Standard Guide for Metals Identification, Grade Verification, and Sorting E1543-14(2022) Standard Practice for Noise Equivalent Temperature Difference of Thermal Imaging Systems E1213-14(2022) Standard Practice for Minimum Resolvable Temperature Difference for Thermal Imaging Systems E1311-14(2022) Standard Practice for Minimum Detectable Temperature Difference for Thermal Imaging Systems E1862-14(2022) Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Ra E1897-14(2022) Standard Practice for Measuring and Compensating for Transmittance of an Attenuating Medium Using In E2906/E2906M-18(2022) Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles E2929-18(2022) Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduc E1933-14(2022) Standard Practice for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers E2862-23 Standard Practice for Probability of Detection Analysis for Hit/Miss Data E977-05(2023) Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials E2581-14(2023) Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aeros E2775-16(2023) Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Tr E1934-99a(2024) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography Ultrasonic Method E494-20 Standard Practice for Measuring Ultrasonic Velocity in Materials by Comparative Pulse-Echo Method E2479-16(2021) Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitu E127-20 Standard Practice for Fabrication and Control of Flat Bottomed Hole Ultrasonic Standard Reference Blocks E114-20 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing E317-21 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Sy E1324-21 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments E3081-21 Standard Practice for Outlier Screening Using Process Compensated Resonance Testing via Swept Sine Input for E797/E797M-21 Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method E1158-14 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ult E2985/E2985M-14(2019) Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements D E214-05 Standard Practice for Immersed Ultrasonic Testing by the Reflection Method Using Pulsed Longitudinal Waves (W E1315-93(2002) Standard Practice for Ultrasonic Examination of Steel with Convex Cylindrically Curved Entry Surfaces (W E428-08(2013) Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in U E664/E664M-15(2020)e1 Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic E2700-20 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays E1001-21 Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Metho E1961-16(2021) Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focu E213-22 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing E3044/E3044M-22 Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints E1774-17(2022) Standard Guide for Electromagnetic Acoustic Transducers (EMATs) E1816-18(2022) Standard Practice for Measuring thickness by Pulse-Echo Electromagnetic Acoustic Transducer (EMAT) M E2192-13(2022) Standard Guide for Planar Flaw Height Sizing by Ultrasonics E2223-13(2022) Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultra E2904-22 Standard Practice for Characterization and Verification of Linear Phased Array Ultrasonic Probes E2375-22 Standard Practice for Ultrasonic Testing of Wrought Products E1901-23 Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic E2491-23 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and E3397-23 Standard Practice for Resonance Testing Using the Impulse Excitation Method C1331-18(2023) Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cr C1332-18(2023) Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Puls E3167/E3167M-18(2023) Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene Electrofusion E3170/E3170M-18(2023) Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints E2580-24 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospa E1962-24 Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques E3370-24 Standard Practice for Matrix Array Ultrasonic Testing of Composites, Sandwich Core Constructions, and Metals E2373/E2373M-19(2024) Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique E164-24 Standard Practice for Contact Ultrasonic Testing of Weldments E3213-19(2024) Standard Practice for Part-to-Itself Examination Using Process Compensated Resonance Testing Via Swep E2001-24 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic P E587-15(2025) Standard Practice for Ultrasonic Angle-Beam Contact Testing B594-19(2025) Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products E1065/E1065M-20(2025) Standard Practice for Evaluating Characteristics of Ultrasonic Search Units E273-25 Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing E2534-20(2025) Standard Practice for Targeted Defect Detection Using Process Compensated Resonance Testing Via Swe B548-25 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels site Pressure Vessels Using Acoustic Emission (Withdrawn 2025) Pressure Metal Storage Tanks Using Acoustic Emission sure Vessels Using Thermal Pressurization orced Plastic Resin (FRP) Tanks/Vessels coustic Emission from Crack Face Rubbing ontrolled Stimulation d Thermosetting Resin Pipe (RTRP) ure Vessels Using Acoustic Emission onse Using an Acrylic Rod Flat Panel Composite Structures Used in Aerospace Applications nsor Response ow Carbon, Forged Piping using Controlled Hydrostatic Pressurization and Steam Heated Paper Dryers ressure Vessels e Spot-Welding Fan Blades Using Acoustic Emission ber Reinforced Plastic (GFRP) Materials Using Acoustic Emission from Metal Pressure Boundaries , Laminates, and Bonded Joints Mounted Acoustic Emission Sensors d Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores and Communication in Nondestructive Evaluation (DICONDE) ion (DICONDE) nic Testing Data (Withdrawn 2013) ation (DICONDE) gical Examination Data ation (DICONDE) for Computed Radiography (CR) Test Methods ation (DICONDE) for Eddy Current (EC) Test Methods ation (DICONDE) for Digital X-ray (DX) Test Methods aluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods ation (DICONDE) for Thermography (TG) Test Methods ation State Display ing and Inspection Systems ation (DICONDE) for Ultrasonic Test Methods ctromagnetic Methods ss and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys ent (Electromagnetic) Testing Methods ll Thickness Determinations in Boiler Tubing (Withdrawn 2020) inuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature (Withdrawn 2019) Current Field Measurement Technique ger Tubes Using Remote Field Testing g Conformable Sensor Arrays nt Sensors without Coating Reference Standards f Seamless Aluminum-Alloy Tube ating Current Field Measurement Technique agnetic (Eddy Current) Method f Ferrous Metals opper-Alloy Tubes ckel Alloy Tubular Products tic Cylindrical Bar Product Above the Curie Temperature Aluminum Redraw Rod for Electrical Purposes agnetic Heat Exchanger Tubes tivity Leak Detector ali-Ion Diode) (Withdrawn 2013) ctor in the Inside-Out Testing Mode ctor or Residual Gas Analyzer in the Tracer Probe Mode trometer Leak Detector or Residual Gas Analyzer in the Hood Mode ctor in the Detector Probe Mode ovable Process st-Emulsification Process Post-Emulsification Process able Process Liquid Penetrant and Magnetic Particle Methods s for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing ve Testing Agencies Testing Agencies nts (Withdrawn 2012) utron Radiographic Examination nt in Neutron Radiologic Beams ty in Aluminum Neutron Absorbers using Neutron Attenuation Measurements by Pinhole Imaging al Radioscopic Data enium-75 Industrial Radiographic Sources Components of Hole-Type Image Quality Indicators (IQI) Used for Radiography f Computed Radiography Systems n in Radiography and Radioscopy aterials and Components m Performance ng Representative Quality Indicators (RQIs) nd Sandwich Core Materials Used in Aerospace Applications graphic Films n in Radiography and Radioscopy for High Energy Applications diographic Imaging Systems below 4 MeV Wire Image Quality Indicators (IQI) Used for Radiography strial Radiographic Imaging Systems from 4 to 25 MeV raphy (Photostimulable Luminescence Method) Mini and Micro Focus X-ray Tubes Detection Sensitivity and Calculation of Numerical Detection Limit on to Graded ASTM Reference Radiographs Steel Castings Certain Parameters are Changed Digitization Systems adiography of Steel Plates 14 to 2 in. (6 to 51 mm) Thick with X-Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60 Steel Castings Alloy Castings ated Devices mm)) Steel Castings per Alloy Castings rtain Parameters are Changed Filament-Wound Pressure Vessels Used in Aerospace Applications sed in Aerospace Applications ent Wound Pressure Vessels Used in Aerospace Applications ir Patches Used in Aerospace Applications s Used in Piping Application red Aerospace Parts After Build Recognition of Digital Radiographic Test Data Laser Powder Bed Fusion Imaging Systems rmal Imaging Systems ermal Imaging Systems ture Using Infrared Imaging Radiometers n Attenuating Medium Using Infrared Imaging Radiometers f Tube Bundles ith Magnetostrictive Transduction rared Imaging Radiometers dwich Core Materials in Aerospace Applications k Using Piezoelectric Effect Transduction nfrared Thermography ulse-Echo Method nk Walls Using Lateral Longitudinal (LCR) Waves ndard Reference Blocks ho Testing Instruments and Systems without the Use of Electronic Measurement Instruments ng Instruments esting via Swept Sine Input for Metallic and Non-Metallic Parts o Contact Method Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material (Withdrawn 2019) stic Constant Measurements Derived from Resonant Ultrasound Spectroscopy Pulsed Longitudinal Waves (Withdrawn 2007) ally Curved Entry Surfaces (Withdrawn 2007) m, Reference Blocks Used in Ultrasonic Testing (Withdrawn 2019) ion of Longitudinal Ultrasonic Waves by Immersion Method d Pulse-Echo Ultrasonic Method Using Longitudinal Waves onal Discrimination with Focused Search Units Acoustic Transducer (EMAT) Methods essels Using Angle Beam Ultrasonics rasonic Probes Echo Straight-Beam Ultrasonic Methods onic Testing Instruments and Systems with Broadband Pulse-Echo Cross-Correlation Method of Advanced Ceramics by Pulse-Echo Contact Technique of Polyethylene Electrofusion Joints ene Electrofusion Joints ore Materials Used in Aerospace Applications ransducer (EMAT) Techniques re Constructions, and Metals on (TOFD) Technique d Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts th Metallic and Non-metallic Parts ed Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts with Cobalt-60
0
advertisement
Download
advertisement
Add this document to collection(s)
You can add this document to your study collection(s)
Sign in Available only to authorized usersAdd this document to saved
You can add this document to your saved list
Sign in Available only to authorized users