MZ-NH700/NHF800
SERVICE MANUAL
US Model
MZ-NHF800
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Ver 1.1 2004.09
MZ-NH700/NHF800
Chinese Model
Tourist Model
MZ-NH700
Photo: MZ-NHF800
US and foreign patents licensed from Dolby
Laboratories Licensing Corporation.
• SonicStage and SonicStage logo are trademarks or registered trademarks of Sony Corporation.
• MD Simple Burner, OpenMG, “Magic Gate”, “MagicGate Memory Stick”, “Memory Stick”,
Model Name Using Similar Mechanism
NEW
MD Mechanism Type
MT-MZNH900-181
Optical Pick-up Name
ABX-U
Hi-MD, Net MD, ATRAC, ATRAC3, ATRAC3plus and their logos are trademarks of
Sony Corporation.
• Microsoft, Windows, Windows NT and Windows Media are trademarks or registered
trademarks of Microsoft Corporation in the United States and /or other countries.
• IBM and PC/AT are registered trademarks of International Business Machines Corporation.
• Macintosh is a trademark of Apple Computer, Inc. in the United States and/or other countries.
• MMX and Pentium are trademarks or registered trademarks of Intel Corporation.
• All other trademarks and registered trademarks are trademarks or registered trademarks of their
respective holders.
SPECIFICATIONS
MD recorder
Frequency response
Antenna
Inputs
FM/TV/WEATHER:
Headphones/earphones cord antenna
AM:
Built-in ferrite bar antenna
20 to 20,000 Hz ± 3 dB
Audio playing system
MiniDisc digital audio system
Laser diode properties
Material: GaAlAs
Wavelength: λ = 790 nm
Emission duration: continuous
Laser output: less than 44.6 µW
(This output is the value measured at a distance of 200 mm from the
lens surface on the optical pick-up block with 7 mm aperture.)
MIC: stereo mini-jack
(minimum input level 0.13 mV)
LINE IN (OPT)1):
stereo mini-jack for analog input (minimum input level 49 mV)
optical (digital) mini-jack for optical (digital) input
Outputs
i2): stereo mini-jack (dedicated remote control jack)
Recording and playback time
Maximum output (DC)
When using HMD1G (1GB disc):
Maximum 34 hours in Hi-LP stereo
When using MDW-80 in Hi-MD mode:
Maximum 10 hours and 10 min. in Hi-LP stereo
When using MDW-80 in MD mode:
Maximum 160 min. in monaural
Maximum 320 min. in LP4 stereo
Headphones:
5 mW + 5 mW (24 Ω) (USA model)
3 mW + 3 mW (16 Ω) (European models)
5 mW + 5 mW (16 Ω) (Other models)
Revolutions
USA model:
FM: 87.5 - 108.0 MHz
AM: 530 - 1,710 kHz (10 kHz step)
531 - 1,710 kHz (9 kHz step)
TV: 2 - 13 CH
WEATHER: 1 - 7 CH
Canadian model:
FM: 87.5 - 108.0 MHz
AM: 530 - 1,710 kHz (10 kHz step)
531 - 1,710 kHz (9 kHz step)
Models for Europe and China:
FM: 87.5 - 108.0 MHz
AM: 531 - 1,602 kHz
Other models:
FM: 87.5 - 108.0 MHz
AM: 530 - 1,710 kHz
350 rpm to 3,000 rpm (CLV)
Error correction
Hi-MD:
LDC (Long Distance Code)/BIS (Burst Indicator Subcode)
MD:
ACIRC (Advanced Cross Interleave Reed Solomon Code)
Sampling frequency
44.1 kHz
Sampling rate converter
Input: 32 kHz/44.1 kHz/48 kHz
Coding
Hi-MD:
ATRAC3plus (Adaptive TRansform Acoustic Coding 3 plus)
MD:
ATRAC
ATRAC3 −− LP2/LP4
Radio (MZ-NHF800)
Frequency range
General
Power requirements
Sony AC Power Adaptor connected at the DC
IN 3V jack:
120 V AC, 60 Hz (Models for USA, Canada, Mexico, and Taiwan)
230 V AC, 50/60 Hz (Models for continental Europe and Chile)
240 V AC, 50 Hz (Model for Australia)
230 V AC, 50 Hz (Models for U.K. and Hong Kong)
115 V/230 V AC, 50/60 Hz (Other models in MZ-NHF800)
100 - 240 V AC, 50/60 Hz (Other models in MZ-NH700)
The recorder:
Nickel metal hydride rechargeable battery
NH-7WMAA 1.2V 700 mAh (MIN) Ni-MH
LR6 (size AA) alkaline battery
AC power adaptor DC 3V
Operating temperature
+5° C (+41° F) to +35° C (+95° F)
Dimensions
Approx. 81.0 × 29.2 × 78.9 mm (w/h/d)
(31/4 × 113/16 × 31/8 in.) (excluding projecting parts and controls)
Mass
Approx. 103 g (3.7 oz) (the recorder only)
Approx. 122 g (4.4 oz) (including the rechargeable battery)
1)The LINE IN (OPT) jack is used to connect either a digital
(optical) cable or a line (analog) cable.
2)Measured in accordance with JEIAT.
– Continued on next page –
Modulation system
Hi-MD:
1-7RLL (Run Length Limited)/PRML
(Partial Response Maximum Likelihood)
MD:
EFM (Eight to Fourteen Modulation)
9-879-056-02
2004I05-1
© 2004.09
Sony Corporation
Personal Audio Company
Published by Sony Engineering Corporation
PORTABLE MINIDISC RECEIVER
MZ-NH700/NHF800
Battery life
When recording continuously
Hi-MD mode (When using a 1GB Hi-MD disc)
(Unit: approx.hours)(JEITA3))
Batteries
Linear Hi-SP
PCM
NH-7WMAA 3
Hi-LP
4.5
5
3.5
4.5
4)
LR65)
2.5
3) Measured in accordance with the JEITA (Japan Electronics and
Information Technology Industries Association) standard.
4) When using a 100% fully charged nickel metal hydride rechargeable
battery
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be
damaged by heat.
5) When using a Sony LR6 (size AA)
“STAMINA” alkaline dry battery (produced in Japan)
Hi-MD mode (When using a 60/74/80-minute standard disc)
(Unit: approx.hours)(JEITA)
Batteries
Linear Hi-SP
PCM
NH-7WMAA 2.5
LR6
5
Hi-LP
4.5
5.5
8
9.5
MD mode
(Unit: approx.hours)(JEITA)
Batteries
SP
LP2
LP4
Stereo Stereo Stereo
NH-7WMAA 4.5
LR6
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
7.5
6
6.5
9.5
11
When playing continuously
Hi-MD mode (When using a 1GB Hi-MD disc)
(Unit: approx.hours)(JEITA)
Batteries
Linear Hi-SP
PCM
Hi-LP
NH-7WMAA 4.5
7.5
9
11
18.5
21.5
LR6
Hi-MD mode (When using a 60/74/80-minute standard disc)
(Unit: approx.hours)(JEITA)
Batteries
Linear Hi-SP
PCM
NH-7WMAA 4
LR6
MD mode
Batteries
9.5
Hi-LP
7.5
9
17
20
(Unit: approx.hours)(JEITA)
SP
LP2
LP4
Stereo Stereo Stereo
NH-7WMAA 7.5
9
10
20.5
24
26
LR6
When using the radio (MZ-NHF800)
(Unit: approx.hours)(JEITA)
Batteries
FM/AM
TV/Wb
(weather)6)
NH-7WMAA 7.5
7
18.5
17
LR6
6) USA model only.
On power sources
• For use in your house: use the AC power adaptor supplied with this
recorder. Do not use any other AC power adaptor since it may cause the
recorder to malfunction.
Polarity of the plug
Supplied accessories
AC power adaptor (1)
Remote control (1)
Headphones (for USA model) (1)
Earphones (except USA model) (1)
Dedicated USB cable (1)
NH-7WMAA Nickel metal hydride rechargeable battery (1)
CD-ROM (SonicStage/MD Simple Burner (1)*
Battery carrying case (1)
Carrying pouch (except USA model)
Optical cable (MZ-NH700) (except Canadian andMexican Models) (1)
Clamp filter (2)
*Do not play a CD-ROM on an audio CD player.
Design and specifications are subject to change without notice.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
2
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS
QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT
DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
MZ-NH700/NHF800
Ver 1.1
TABLE OF CONTENTS
1.
SERVICING NOTES ................................................ 4
2.
GENERAL
Location of Controls ........................................................ 5
3.
DISASSEMBLY
3-1.
3-2.
3-3.
3-4.
3-5.
Disassembly Flow ........................................................... 6
Case (Lower) Section ...................................................... 7
MAIN Board .................................................................... 7
Case (Upper) Section ....................................................... 8
Mechanism Deck Section (MT-MZNH900-181),
MD Standard Pin ............................................................. 8
3-6. Set Chassis Assy .............................................................. 9
3-7. Gear (BSA), Gear (SB) ................................................... 9
3-8. Op Service Assy .............................................................. 10
3-9. DC Motor SSM18D/C-NP (Spindle) (M701),
DC Motor (Sled) (M702), DC Motor Unit
(Over Write Head Up/Down) (M703) ............................. 10
3-10. Holder Assy ..................................................................... 11
3-11. Position of Ferrite Core ................................................... 11
4.
TEST MODE .............................................................. 12
5.
ELECTRICAL ADJUSTMENTS ......................... 16
6.
DIAGRAMS
6-1. Block Diagram –MD SERVO Section – ......................... 21
6-2. Block Diagram –AUDIO Section – ................................. 22
6-3. Block Diagram –POWER SUPPLY Section – ................ 23
6-4. Schematic Diagram –MAIN Section (1/9) – ................... 25
6-5. Schematic Diagram –MAIN Section (2/9) – ................... 26
6-6. Schematic Diagram –MAIN Section (3/9) – ................... 27
6-7. Schematic Diagram –MAIN Section (4/9) – ................... 28
6-8. Schematic Diagram –MAIN Section (5/9) – ................... 29
6-9. Schematic Diagram –MAIN Section (6/9) – ................... 30
6-10. Schematic Diagram –MAIN Section (7/9) – ................... 31
6-11. Schematic Diagram –MAIN Section (8/9) – ................... 32
6-12. Schematic Diagram –MAIN Section (9/9) – ................... 33
6-13. Printed Wiring Board –MAIN Section (1/2) – ................ 34
6-14. Printed Wiring Board –MAIN Section (2/2) – ................ 35
7.
EXPLODED VIEWS
7-1.
7-2.
7-3.
7-4.
Case (Lower) Section ...................................................... 47
Case (Upper) Section ....................................................... 48
Chassis Section ................................................................ 49
Mechanism Deck Section (MT-MZNH900-181) ............ 50
6.
ELECTRICAL PARTS LIST ................................ 51
3
MZ-NH700/NHF800
SECTION 1
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pickup block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
Providing the required system environment
System requirements
The following system environment is required in order to use the SonicStage/MD Simple
Burner software for the MD Walkman.
Computer
IBM PC/AT or Compatible
• CPU: Pentium II 400 MHz or higher (Pentium III 450 MHz or higher
is recommended.)
• Hard disk drive space: 200 MB or more (1.5 GB or more is
recommended) (The amount space will vary according to Windows
version and the number of music files stored on the hard disk.)
• RAM: 64 MB or more (128 MB or more is recommended)
Others
• CD drive (capable of digital playback by WDM)
• Sound Board
• USB port (supports USB (previously USB 1.1))
Operating
System
Factory installed:
Windows XP Media Center Edition 2004/Windows XP Media Center
Edition/Windows XP Professional/Windows XP Home Edition/
Windows 2000 Professional/Windows Millennium Edition/Windows
98 Second Edition
Display
High Color (16bit) or higher, 800 × 600 dots or better (1024 × 768 dots
or better is recommended)
Others
• Internet access: for Web registration, EMD services and CDDB
• Windows Media Player (version 7.0 or higher) installed for playing
WMA files
This software is not supported by the following environments:
• OSs other than the indicated above
• Personally constructed PCs or operating systems
• An environment that is an upgrade of the original manufacturer-installed operating system
• Multi-boot environment
• Multi-monitor environment
• Macintosh
Notes
• We do not ensure trouble-free operation on all computers that satisfy the system requirements.
• The NTFS format of Windows XP/Windows 2000 Professional can be used only with the standard
(factory) settings.
• We do not ensure trouble-free operation of the system suspend, sleep, or hibernation function on all
computers.
• For Windows 2000 Professional users, install Service Pack 3 or later version before using the
software.
OPERATION CHECK WHEN THE LID IS OPEN
In making an operation check with the MAIN Board removed from
the set, short the SL894 (OPEN/CLOSE) of the MAIN Board with
the solder before starting the operation check.
Note: Be sure to remove the solder used for shortcircuit after the repaire
completed.
– MAIN Board (Conductor Side) –
SL894
(OPEN/CLOSE)
4
MZ-NH700/NHF800
SECTION 2
GENERAL
This section is extracted from
instruction manual.
Looking at controls
The recorder
The headphones/earphones with a remote control
(MZ-NHF800)
1
8
2
9
F
G
q;
A
H
3
qa
4
qd
6
qf
7
qg
A Display window
B T MARK/REC (+N) button
C Jog dial
D 5-way control key
Operation
Function
Press NENT 1)
play, enter
Press towards
.
find the beginning
of the previous
track, rewind
Press towards
>
find the beginning
of the next track,
fast forward
Press towards
VOL +1) or
VOL −.
volume
I
D
K
J
E
qs
5
B
C
E DC IN 3V jack
F X (pause) button
G x (stop) • CANCEL/CHG button
H OPEN switch
I GROUP button
J •NAVI/ MENU button
Press lightly to go to the NAVI
(navigation) setting mode.
Press for 2 seconds or more to go to
MENU setting mode.
K
USB cable connecting jack
L LINE IN (OPT) jack
M MIC (PLUG IN POWER) jack
There is a tactile dot beside the MIC
(PLUG IN POWER) jack.
N HOLD switch
Slide the switch in the direction of the
arrow to disable the buttons on the
recorder. To prevent the buttons from
being accidentally operated when you
carry the recorder, use this function.
O i (headphones/earphones) jack
A VOL +, − buttons
Press to adjust the volume.
B Jog lever (NX/ENT, ., > •
BAND, TUNE −, TUNE +)
When using an MiniDisc
Operation
C Display window
D x (stop) button
E
(group) +, −
F RADIO ON/OFF button
Press to turn on or off the radio.
G Clip
H HOLD switch
To prevent the buttons from being
accidentally operated when you carry
the recorder, use this function.
I DISPLAY button
J P-MODE/
button
K SOUND button
Function
Press NX/ENT
play, pause, enter
Slide towards
find the
beginning of the
previous track,
rewind
Slide towards
find the
beginning of the
next track, fast
forward
.
>
When using the radio
Operation
Function
Press BAND
select a band
tune backwards
Slide towards
TUNE −
Press towards
TUNE +
tune forward
The display window of the remote control (MZ-NHF800)
1
2
6
7
3
4
5
1) There are tactile dots beside the NENT
and VOL + buttons.
The display window of the recorder
1
2
7
A Character information display
Displays the disc and track names,
date, error messages, track numbers,
etc.
B SYNC (synchro-recording) indication
C Hi-MD/MD indication
“Hi-MD” lights up when the
operation mode of the recorder is in
Hi-MD mode and “MD” lights up
when the operation mode is in MD
mode.
D REC indication
Lights up during recording or file
transfers from the computer. When
flashing, the recorder is in record
standby mode.
3
4 5
8
6
9
E Battery indication
Shows the approximate remaining
battery power. If the battery is weak,
the indication becomes empty and
starts flashing.
F Disc indication
Shows that the disc is rotating for
recording or playing.
G Track mode (PCM, Hi-SP, Hi-LP, SP,
LP2, LP4, MONO) indication
H Sub play mode/Repeat play
indications
Shows the selected Sub play mode
(single-track play, shuffle play, etc.) or
Repeat play.
I Main play mode indications
Shows the selected main play mode
(group play, bookmark play, etc.).
A Disc indication
B PRESET indication
C Character information display
D Sub play mode/Repeat play
indications
8
E SND (sound) and SUR (surround)
indications
F Battery level indication
G Track number/Band/Preset number
display
H Main play mode indications
The headphones/earphones with a remote control
(MZ-NH700)
4
1
5
2
6
3
7
A Clip
B HOLD switch
To prevent the buttons from being
accidentally operated when you carry
the recorder, use this function.
C
(group) +, − buttons
D Volume control (VOL +, −)
Turn to adjust the volume.
E NX (play, pause) button
F x (stop) button
G ., > buttons
Operation
Function
Press .
find the beginning of
the previous track,
rewind
Press >
find the beginning of
the next track, fast
forward
5
MZ-NH700/NHF800
Ver 1.1
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
Note 1: The process described in
can be performed in any order.
Note 2: Without completing the process described in
, the next process can not be performed.
SET
3-2. CASE (LOWER) SECTION
(Page 7)
3-3. MAIN BOARD
(Page 7)
3-4. CASE (UPPER) SECTION
(Page 8)
3-5. MECHANISM DECK SECTION (MT-MZNH900-181),
MD STANDARD PIN
(Page 8)
3-7. GEAR (BSA), GEAR (SB)
(Page 9)
3-6. SET CHASSIS ASSY
(Page 9)
3-8. OP SERVICE ASSY
(Page 10)
3-9. DC MOTOR SSM18D/C-NP (SPINDLE) (M701),
DC MOTOR (SLED) (M702),
DC MOTOR UNIT (OVER WRITE HEAD UP/DOWN) (M703)
(Page 10)
3-11. POSITION OF FERRITE CORE
(Page 11)
6
3-10. HOLDER ASSY
(Page 11)
MZ-NH700/NHF800
3-2. CASE (LOWER) SECTION
1 two screws
(M1.4)
1 two screws
(M1.4)
2 Remove the case (lower) section
in the direction of the arrow.
3-3. MAIN BOARD
2 LCD module flexible board
(CN471)
3 motor flexible board
(CN701)
6 OP flexible board
(CN501)
1 Remove two solders of over
write head flexible board.
7 MAIN board
5
4 screw (M1.4)
4 three screws
(M1.4)
7
MZ-NH700/NHF800
3-4. CASE (UPPER) SECTION
1 LCD module flexible boaed
(CN471)
7 case (upper) section
5
6 boss
3 herical torsion
spring (L)
4 two step screws
2 Open the case (upper) section.
3-5. MECHANISM DECK SECTION (MT-MZNH900-181), MD STANDARD PIN
1 two step screws (MD)
2 mechanism deck section
(MT-MZNH900-181)
3 MD standard pin
8
MZ-NH700/NHF800
3-6. SET CHASSIS ASSY
5 two screws
1 torsion coil spring (R)
2 extension spring (R)
7 set chassis assy
6 battery case
3 compression coil spring (open)
4 open slider
3-7. GEAR (BSA), GEAR (SB)
1 self tap screw
2 thrust retainer spring
3 washer (0.8-2.5)
5 gear (SB)
4 gear (BSA)
9
MZ-NH700/NHF800
3-8. OP SERVICE ASSY
1 Lead screw block assy is turned
and it removes from OP service assy.
2 OP service assy
3-9. DC MOTOR SSM18D/C-NP (SPINDLE) (M701), DC MOTOR (SLED) (M702),
DC MOTOR UNIT (OVER WRITE HEAD UP/DOWN) (M703)
3 two screws (M1.4)
2 Remove two solders of flexible board.
4 DC motor (sled)
(M702)
1 Remove four solders of flexible board.
8 self tap screw
6 three self tap screws
9 DC motor unit
(over write head up/down)
(M703)
7 DC motor SSM18D/C-NP
(spindle) (M701)
5 motor base assy
10
MZ-NH700/NHF800
Ver 1.1
3-10. HOLDER ASSY
4 Remove the holder assy
to the direction of the arrow A.
2 boss
3 Open the holder assy.
1 boss
A
3-11. POSITION OF FERRITE CORE
-REMOTE CONTROL UNIT-
A cable is rolled once.
Remote control unit
(RM-MC21, RM-MC39LT, RM-MC40ELK)
(RM-MC21, RM-MC40ELK)
20mm
clamp filter (ferrite core)
(Part No. 1-543-793-41)
A cable is rolled once.
(RM-MC39LT)
20mm
clamp filter (ferrite core)
(Part No. 1-543-793-41)
-AC ADAPTOR-
A cable is rolled once.
(AC-ES3010K)
40mm
40mm
clamp filter (ferrite core)
(Part No. 1-543-793-41)
A cable is rolled twice.
clamp filter (ferrite core)
(Part No. 1-543-793-41)
A cable is rolled once.
(AC-ET307K)
40mm
clamp filter (ferrite core)
(Part No. 1-543-798-31)
40mm
clamp filter (ferrite core)
(Part No. 1-543-793-41)
A cable is rolled once.
-USB CABLE-
40mm
clamp filter (ferrite core)
(Part No. 1-543-793-41)
A cable is not rolled.
USB A type
USB mini B type
25mm
20mm
clamp filter (ferrite core)
(Part No. 1-543-798-31)
20mm
clamp filter (ferrite core)
(Part No. 1-543-793-41)
11
MZ-NH700/NHF800
Ver 1.1
SECTION 4
TEST MODE
OUTLINE
A key having no particular description in the text, indicates a set
key.
1. ENTERING THE TEST MODE
Preparation:
Copy the “TestMode_Enter_For_900_800_700_600_600D_
Ver***.exe” folder of the PC application of the latest version to
your PC in advance. (operating system: Windows 2000, Windows
XP)
Also, when using this application, the SonicStage Ver. 2.0 or 2.1 is
necessary, and install it in your PC in advance.
2. OPERATION IN SETTING THE TEST MODE
• When the test mode becomes active, first the Display Check
mode is selected.
• Other mode can be selected from the Display Check mode.
• When the test mode is set, the LCD repeats the following
display.
Display check mode:
Hi-MD
SYNC REC
Hi-SPLP 24
PCMMONO
1SHUFA-B PGM
All lit
Procedure:
1. If a Simple Burner has run on the PC, finish it (including the
one that is resident in the task tray).
2. Start the “TestMode_Enter_For_900_800_700_600_600D_
Ver***.exe”.
3. Insert the fully charged Ni-MH rechargeable battery (NH7WMAA).
4. Open and close the top panel of the main unit to wait until the
system reading finished.
5. Connect the main unit and PC by USB cable.
6. Check by device manager screen from property of “My
computer” that the set is recognised to your PC normally.
7. Click the [Enter TestMode] button on the screen of application
8. Disconnect the USB cable, when “OK” message is displayed
on the application screen.
9. Remove the battery.
All off
Microcomputer
version
display
00#
Ver *.***
“00#”: Model type 005 (MZ-NH700)
004 (MZ-NHF800)
“*.***”: Microcomputer version
• When the X key is pressed and hold down, the display at that
time is held so that display can be checked.
Screen of the PC application “TestMode_Enter_For_900_800_
700_600_600D_Ver***.exe”
(“***” is version number)
Note: Once the test mode is activated with this application, the test mode
is then activated forcibly by only turning on the power.
After the repair completed, be sure to release the test mode by using
this application once more.
12
3. RELEASING THE TEST MODE
Procedure:
1. If a Simple Burner has run on the PC, finish it (including the
one that is resident in the task tray).
2. Start the “TestMode_Enter_For_900_800_700_600_600D_
Ver***.exe”.
3. Insert the fully charged Ni-MH rechargeable battery (NH10WM).
4. Open and close the top panel of the main unit to wait until the
system reading finished.
5. Connect the main unit and PC by USB cable.
6. Check by device manager screen that the set is recognised to
your PC normally.
7. Click the [Exit TestMode] button on the screen of application
8. Disconnect the USB cable, when “OK” message is displayed
on the application screen.
9. Remove the battery.
MZ-NH700/NHF800
Ver 1.1
4. CONFIGURATION OF THE TEST MODE
5. MANUAL MODE
This is mode to adjust or check the operation of the set by function.
Flow of the test mode:
Display Check Mode
00#
Ver *.***
Version display → All lit
→ All off → Version display...
Operation of The Manual Mode
1. Enter the test mode (Display Check mode).
2. Press the [VOL+] key to activate the Manual mode where the
LCD displays as shown below.
Display
Manual Mode
0
Manual
[VOL +] key
x key
0
Manual
Number of 1000th place
Overall Adjustment Mode
0
AdjF**
[VOL --] key
x key
Key Check Mode
114
[GROUP] key
10
Open the lid
3. During each test, the optical pick-up moves outward or inward
while the > or . key is pressed for several seconds
respectively.
4. Each test item is assigned with a four-digit item number; 1000th
place is a top item, 100th place is a major item, 10th place is a
medium item, and unit place is a minor item.
The values adjusted in the test mode are written to the nonvolatile memory (for the items where adjustment was made).
5. To quit the Manual mode, press the x key and return to the
Display Check mode.
Self-Diagnosis Result Display Mode
0
1 0000
> key
x key
Flow of manual mode operation:
Sound Skip Check Result
Display Mode (Play)
x key
[T MARK] key
or [REC] switch
> key
0
P00r00
N ENT key
[VOL +] key: 1000th place of item
number increase.
[VOL --] key: 1000th place of item
number decrease.
Top item switching
x key
Major item switching
Sound Skip Check Result
Display Mode (REC)
> key
0
p00R00
Medium item switching
x key
> key
x key
x key
[VOL +] key: 100th place of item
number increase.
[VOL --] key: 100th place of item
number decrease.
[VOL +] key: 10th place of item
number increase.
[VOL --] key: 10th place of item
number decrease.
Key Count Mode
[NAVI/MENU] key
001
MENU
000
. or > key
(press a few seconds)
(Not used in servicing)
Minor item switching
> key: 1st place of item
number increase.
. key: 1st place of item
number decrease.
Adjusted value variation
[VOL +] key: Increases the adjusted
value.
[VOL --] key: Decreases the adjusted
value.
Adjusted value write
X key: Adjusted value is written.
13
MZ-NH700/NHF800
Ver 1.1
6. OVERALL ADJUSTMENT MODE
6-1. Operation of The Overall Adjustment Mode
1. Enter the test mode (Display Check mode).
2. Press the [VOL--] key to activate the Overall Adjustment mode
where the LCD displays as shown below.
Display
0
AdjF**
Disc mark:
Lit the inner segments: Completed the power supply adjustment.
Lit the outer segments: Completed the charge function check.
“**”:
If “DF” or “FF” is displayed, it mean that completed the servo
overall adjustment.
3. To quit the Overall Adjustment mode, press the x key and
return to the Display Check mode.
Flow of overall adjustment mode:
Overall Adjustment Mode
0
AdjF**
CD Overall Adjustment Mode
. key
x key
***
CD Run
MD1 Overall Adjustment Mode
> key
x key
***
MD1Run
6-2. Error Message in The Overall Adjustment Mode
In the Overall Adjustment mode, if an error occurred, it displays as
following table.
Display
Close!
DfDis!
NoChg!
NoTmp!
NotCD!
NotM1!
NotH3!
****NG
Description
Dose not close the lid
Unsuitableness disc was inserted
Does not finish the charge function check
Does not setting the temperature correction value
Does not complete the CD Overall adjustment beforethe
MD1 Overall adjustment
Does not complete the MD1 Overall adjustment
before the Hi-MD3 Overall adjustment
Does not complete the Hi-MD3 Overall adjustment
before the Stray Light Offset Overall adjustment
Error of item number “****”
7. SELF-DIAGNOSIS RESULT DISPLAY MODE
This set uses the self-diagnostic function system in which if an error
occurred during the recording or playing, the mechanism control
block and the power supply control block in the microcomputer
detect it and record its cause as history in the nonvolatile memory.
By checking this history in the test mode, you can analyze a fault
and determine its location.
Total recording time is recorded as a guideline of how long the
optical pick-up has been used, and by comparing it with the total
recording time at the time when an error occurred in the selfdiagnosis result display mode, you can determine when the error
occurred.
Clear the total recording time, if the optical pick-up was replaced.
7-1. Operation of The Self-Diagnosis Result Display
Mode
1. Enter the test mode (Display Check mode).
2. Press the > key to activate the Self-Diagnosis Result Display
mode where the LCD displays as shown below.
Hi-MD3 Overall Adjustment Mode
[VOL +] key
x key
Display
***
HM3Run
***
$$####
Stray Light Offset Overall
Adjustment Mode
[VOL --] key
x key
***
OfsRun
Optical Pick-up Operation
Check Mode
[GROUP] key
x key
[T MARK] key
or [REC] switch
x key
000
OPChk
Initialize The Adjustment Values
911
ResOK?
(rotation)
14
“***” : Error code
“$$” : Error history code
“###” : Total recording time
3. To quit the Self-Diagnosis Result Display mode, press the x key
and return to the Display Check mode.
MZ-NH700/NHF800
Ver 1.1
Flow of Self-diagnosis Result Display mode operation:
***
1 ####
[VOL +] key
The first error
[VOL --] key
The last error
One error before
the last
[VOL --] key
***
N2####
[VOL +] key
11*
$$$$$$ ##
[VOL --] key
***
N1####
[VOL +] key
Operation of The Key Check Mode
1. Enter the test mode (Display Check mode).
2. Press the [GROUP] key to activate the Key Check mode where
the LCD displays as shown below.
Display
***
N ####
[VOL +] key
8. KEY CHECK MODE
This mode is used for key check.
Two error before
the last
“*”
: Remote commander (0: with, 4: without)
“$$$$$$” : Pressed key name.
When remote commander key is pressed, display becomes
as “r$$$$$”.
When the jog dial is turned, it displays “JOG+ X” or “JOGX” (“X” is number of 1 to 3). If the jog dial is turned four
click, it displays “JOG+OK” or “JOG-OK”.
“##”
: Key voltage of remote commander. (Hexadecimal number)
3. When all keys (*1) check is OK on the main unit, it displays
as follows.
[VOL --] key
Display
***
R_####
[VOL +] key
Total recording time
888
SET OK ##
[VOL --] key
When all keys (*1, 2) check is OK on the remote commander,
it displays as follows.
7-2. Error Code of The Self-Diagnosis Result Display
Mode
Error code
00
01
02
03
04
05
06
07
08
09
12
13
32
33
34
Description
No error
Attempt to access an abnormal address
High temperature detected
Focus error (no change)
Abnormal rotation of disc
Fault of disc discriminate
Error of access loop (no change)
Error of access loop (with change)
Could not read address
Focus error (with change)
Could not read data with SYNC
TOC address data error
Focus error, ABCD offset error
Tracking error, offset error
Tracking error, X1 tracking error, offset error
Display
888
RMC OK ##
*1) Turn the jog dial four click clockwise and counterclockwise to
jog test is OK.
*2) [RADIO ON/OFF] key (MZ-NHF800) is not included in this check.
4. When all keys check are OK both the main unit and the remote
commander, it display backs to the Display Check mode
automatically.
5. To quit the Key Check mode, open the lid and return to the
Display check mode.
7-3. Clear The Total Recording Time
After replacing the optical pick-up, clear the total recording time.
1. Enter the test mode (Display Check mode).
2. Press the > key to activate the Self-Diagnosis Result Display
mode.
3. Press the [VOL--] key once to display the total recording time
indication.
4. Press the X key and display “ClrOK?”.
5. Press the X key again to display “RecT 0” and clear the total
recording time.
15
MZ-NH700/NHF800
Ver 1.1
SECTION 5
ELECTRICAL ADJUSTMENTS
1. PRECAUTIONS FOR ADJUSTMENT
1. Adjustment must be done in the test mode only. After adjusting,
release the test mode. A key having no particular description
in the text, indicates a set key.
2. Use the following tools and measuring instruments.
• Digital voltmeter
• Regulated dc power supply (two sets)
• Thermometer (using the Temperature Correction)
• Laser power meter
• CD adjustment disc TDYS-1 (Part No. : 4-963-646-01)
• MD1/HiMD1 hybrid adjustment disc MDW-74/GA1
(Part No. : 4-229-747-01)
• Hi-MD3 adjustment disc HMD1GSDJ
(Part No. : 7-819-098-37) *1
• Remote commander in accessories (with LCD)
• AC adapter in accessories
• Ni-MH rechargeable battery (NH-7WMAA) in accessories
(full charged)
• PC application software for test mode
“TestMode_Enter_For_900_800_700_600_600D_Ver***.exe” *2
• USB cable
3-3. Setting The Temperature Correction Value
Procedure:
1. In the test mode (Display Check mode), press the [VOL+] key
to enter the Manual mode.
2. Press the > key twice, and press the [VOL+] key twice to
display as follows.
Display
130
Temp
3. Press the > key once to select the item number 0131 and
display as follows.
Display
131
###S**
adjustment value (hexadecimal)
*1) Hi-MD3 adjustment disc (HMD1GSDJ) is consumable.
Therefore if it is used 400 times, exchange it for a new.
*2) Use the newest version every time.
Copy the whole folder of this program to your PC.
Operating system: Windows 2000, Windows XP
When using this application, the SonicStage Ver. 2.0 or 2.1 is
necessary, and install it in your PC in advance.
3. Unless specified otherwise, supply DC 1.5 V from battery
terminals (CL431: BATT+, CL432: BATT–).
2. ADJUSTMENT SEQUENCE
Adjustment must be done with the following order.
Adjustment order:
1. Entering the test mode
2. Initialize the adjustment value
3. Setting the temperature correction value
4. Power supply voltage adjustment
5. Charge function check
6. Laser power check
7. Setting the adjustment values
8. Servo Overall adjustment
9. Resume clear
10. Releasing the test mode
3. ADJUSTMENT OF THE EACH ITEM
3-1. Entering The Test Mode
Refer to the “SECTION 4. TEST MODE”.
4. Measure the ambient temperature.
5. Adjust with [VOL+]/[VOL--] keys so that the adjusted value
(hexadecimal value) becomes the ambient temperature.
(example: 25 °C = 19h)
6. Press the X key to write the adjusted value.
7. Press the x key four times and back to the Display Check
mode.
3-4. Power Supply Voltage Adjustment
Adjustment must be done with the following order.
3-4-1. Setting
Procedure:
1. Enter the test mode (Display Check mode), and make sure
that the power supply voltage is 1.2 V.
2. Press the [VOL+] key to enter the Manual mode.
3. Press the [VOL+] key twice to display as follows.
Display
2
POWER
4. Press the > key once, press the [VOL+] key once, and press
the > key once again to display as follows.
Display
3-2. Initialize The Adjustment Value
Procedure:
1. In the test mode (Display Check mode), press the [VOL--] key
to enter the Overall adjustment mode.
2. Press the [T MARK] key and display “911 ResOK?”.
3. Press the X key to display “911 Reset!” and initialize the
adjustment values.
4. Press the x key and back to Display Check mode.
16
210
PwrAdj
5. Repeat the next procedures (3-4-2. PwrAdj Adjustments), and
adjust all contents of “table 3-4-1. PwrAdj Specifications”.
MZ-NH700/NHF800
Ver 1.1
3-4-2. PwrAdj adjustments
Repeat the following procedures and adjust all contents of “table 34-1. PwrAdj Specifications”.
ItemNo.
2211
2212
2213
2214
2215
2216
2217
2218
2219
2221
2222
2223
2224
2225
2226
2227
2228
2229
2231
2232
2233
Example Display (Item No. 2211)
211
AD **
adjustment value (hexadecimal)
Procedure:
1. Connect the digital voltmeter to measuring point (refer to the
following table) and ground (CL433).
2. Press the > key to change the item number.
3. Adjust with [VOL+]/[VOL--] keys so that the value of digital
voltmeter becomes specification value.
4. Press the X key to write the adjusted value.
5. Press the > key to select the next item.
6. Repeat adjustment from step 1 until item number 2233.
Display
211 AD **
212 AD **
213 AD **
214 AD **
215 AD **
216 AD **
217 AD **
218 AD **
219 AD **
221 AD **
222 AD **
223 AD **
224 AD **
225 AD **
226 AD **
227 AD **
228 AD **
229 AD **
231 AD **
232 AD **
233 AD **
Specification value
2.05 V + 0.02 V
2.25 V ± 0.01 V
1.20 V + 0.01 V
3.10 V ± 0.015 V
3.10 V ± 0.015 V
3.02 V ± 0.02 V
3.02 V ± 0.02 V
2.275 V ± 0.01 V
2.480 V ± 0.01 V
2.740 V ± 0.01 V
2.985 V ± 0.01 V
2.52 V ± 0.02 V
0.89 V ± 0.02 V
1.08 V ± 0.02 V
1.52 V ± 0.02 V
2.27 V ± 0.02 V
2.97 V ± 0.02 V
0.94 V ± 0.02 V
1.28 V ± 0.02 V
2.57 V ± 0.02 V
2.57 V ± 0.02 V
Measuring point
CL8027
CL8027
CL8001
CL658
CL658
CL919
CL919
CL921
CL921
CL921
CL921
CL931
CL604
CL604
CL604
CL604
CL604
CL604
CL604
CL604
CL604
Note1: “**” is adjustment value (hexadecimal number).
Note2: Ground point of all measuring points is CL433.
Table 3-4-1. PwrAdj Specifications
Adjustment Location:
CL460
(VBUS GND)
C457
– MAIN BOARD (Conductor Side) –
S892
(HALF LOCK)
CL432
(BATT–)
SL891
C461
K
C537
C555
C526
C536
C539
C550
C552
C547
C545
C860
C565
R518
R517
R509
R525
C528
R526
C523
C513
C529
C538
R502
R501
C525
L504
C556 +
L506
C566
C661
A
R657
K
R635
R843
VDR801
R868
R823
C847
R827
R810
C635 +
C637 +
1
IC604
4
2
3
C668
R861
C804
R811
R812
R673
R869
R815
C645
4
A
C634
C638 R671
CL919
C669
C857 R817
4
1
R646 X801
C961
G
R802
∗
CL8027
R808
R805
IC801
R804
R807
D
R806
X802
FB807
C801
A
4
C830
R845
IC804
3
K
R832
D801
A
C853
S
R867 C856
2
1
GDS
C858
D803
C859
K
C628
C802
IC902
FB801
C822
2
C622 +
C415
D401
C412
K
+ C567
R820 C809
3
R862
R447
A
R524
ECB
R511
C805
L906
C633
D602
Q802
R436
CL921
R520
C803
L601
R435
∗
IC401
Q401
Q504
A
C574
SL802
S
4
C408
R519
L502
+ C424
+ C423
C660
L603
C611
Q609
1
C559 R512
5
D D603
R801
IC605
R612
4
5
C407
5
3
8
C533
C427
D441 K
A
C642
R629
R617
R648
C643
1
16
CN471
C527
C531
C438
∗
IC501
Q612
G
+ C627
+ C411
B
C557
C530
L901
C674
C602
C671 R647
R605
5451 48 45 43 42 40 37 34 31
5552 49 47 44 41 38 36 33 30
5653 50 46
39 35 32 29
1 4 7 11
18 22 25 28
2 5 8 10 13 16 19 21 24 27
3 6 9 12 14 15 17 20 23 26
R860
SL901
R670
C620
C421 R679
3
C
8
1
C675 R645
+ C616
R425
R434
4
R684 2
IC607
R642
R650
R636
Q614
R640 R641
S D D
C652 +
R681
R446
1
C666
C641
84 87 89 91 94 98 102 106 109 111 3 2
85 86 88 90 93 97 101 105 108 110 112 1
R653
C609
R682 1
E
R616
57 56 54 52 49 45 41 37 34 32 30 29
58 59 55 53 50 46 42 38 35 33 31 28
60 61
27 26
62 63
64 51 47 43 39 36
25 24
65 66
67 68 48 44 40 23
22 21
69 70
71 72
20 19
18 17
73 74
75 76
16 15
14 13
77 78
79 96 100 104 12 11
10 9
80 81
92 95 99 103 107 8
7 6
82 83
5 4
C607
C516
W403
C554
R505
K
R608
C604
C625
+ C613
R652
4
1C
2B
2E
C517
C511 C521
C515 C522
Q901
Q618
1E
1B
2C
R654
IC606
K
R683
C601
C479
R484
3
+ C653
R628
R665
R678
+ C612
C355
C619
A
R685
Q471
R649
C636
K
A
K
∗
IC601
+ C614
1
Q615
R638 R639
R675
C644
C630
4
IC402
L907
D609
A
3
G D D
Q613
C672
L608
5
+ C553
C524
C520
R442 C434
1
D611
GDS
C324
R643
R664
D601
3
C673
2
R485
A
1B
E
2B
R480
4
4
2C
1B
1E
D604 A
IC602
1
R474 C476
R475
K
FB471
A
R472
C361
R471
R473
D471
+ C356
R354
R353
5
C254
1C
R478 C478
K
R255
R483
R157
6
D251 K
2C
BP701
5
3
L605
C658 +
+ C621
R152
R155
C363
1
Q611
7
1
C429
FB2
FB357
D613 A
24
FB353
R359
K
IC603
1
S D D
12
IC352
C153
C253
13
19
R262
FB354
BCE
18
C154
C252
R158
C251
R257
FB1
R355
K
A
K
C364
D352
R258
C152
10
G D D
R677
R352
C351
C151
FB355
R601
28
Q351
R251 R151
F351
ECB
D610
22
+ C321
1
C354 +
R154 R254
R356
F1
Q353
S D D
C319 C322
C106
21
G D D
Q352
2E 2B 1C
R153 R253
SL894
C205
R252
R358
R205
2C 1B 1E
C204
R206
R207
Q607
2E
2B
1C
7
IC301
C206
R106
15
C104
L702
CN701
Q608
L303
8
L701
R618
1C 2B 2E
1E 1B 2C
14
C105
R315
C323 +
R309
C325
R310
C202
R107
C327
FB301
+ C313
+ C315
5
R314
R308
R103
R101
R203 R201
4
C328
C102
FB101
R105
C308
1
R312
+ C316
C314
C306
3
L503
+ C518
C519
R443
R444 R441
A
K
C430
W404
R456 R455
D303
R609 R619
A
Q301
IC302
FB201
C425
K
D435
ECB
C677
K
C302
R305
R301
R304 R306
FB501
LF451
C406
C456
C458
D302 A
R307
CL431
(BATT+)
DRY BATTERY
SIZE "AA"
(IEC DESIGNATION R6)
1PC. 1.5V
FB303
K
CL931
FB452
C455
C304 C459
C460
K
CL935
R454
FB451
CL453
(VBUS 5V)
CL658
SL892
SL801
Q801
J402
DC IN 3V
−
+
CL433
(GND)
CL604
CL8055
CL8001
17
MZ-NH700/NHF800
Ver 1.1
3-4-3. VBsAdj adjustments
Procedure:
1. In the “3-4-2. PwrAdj Adjustments” completed status, press
the > key to display as follows.
Display
240
VBsAdj
3-5. Charge Function Check
Note: When perform this check, don’t apply a voltage to battery terminals.
Procedure:
1. Connect the digital voltmeter to CL431 (BATT+) and CL433
(GND).
2. Enter the test mode using the AC adapter.
3. Press the [VOL+] key to enter the Manual mode.
4. Press the [VOL+] key twice to display as follows.
Display
2. Apply the voltage of 5 V to the CL453 (VBUS 5V) and CL460
(VBUS GND).
3. Press the > key to change the item number to 2241.
4. Adjust with [VOL+]/[VOL--] keys so that the value of digital
voltmeter becomes specification value. (refer to “table 3-4-2.
VBsAdj Specifications”)
5. Press the X key to write the adjusted value.
6. Press the > key to select the next item, and repeat
adjustments to item number 2243 at the same manner as step
3 to step 5.
Item No. Display
2241
241 AD **
2242
242 AD **
2243
243 AD **
Specification value
1.13 V ± 0.01 V
2.05 V + 0.02 V
3.30 V ± 0.01 V
2
POWER
5. Press the > key once, press the [VOL+] key once, press the
> key once, press the [VOL+] key three times, and press the
> key once to display as follows.
Display
261
AD **
Measuring point
CL8001
CL8027
CL8055
Note1: “**” is adjustment value (hexadecimal number).
Note2: Ground point of all adjustment points is CL433.
Note3: Refer to page 18 for adjustment location.
Table 3-4-2. VBsAdj Specifications
7. Press the > key to select the item number 2244, and turn
off the power supply of battery terminal.
8. Adjust with [VOL+]/[VOL--] keys so that the voltage of between
CL935 and CL433 (GND) becomes 1.80 V (− 0.02 V).
9. Press the X key to write the adjusted value.
10. Apply the voltage of 1.2 V to the battery terminal again.
11. Press the x key to display “240 VBsAdj” (Item number:
2240).
12. Turn off the voltage of 5 V to the CL453 (VBUS 5V) and
CL460 (VBUS GND).
13. Press the x key three times and back to the Display Check
mode.
adjustment value (hexadecimal)
6. Adjust with [VOL+]/[VOL--] keys so that the value of digital
voltmeter becomes 1.80 V.
7. Press the X key to write the adjusted value.
8. Press the > key to select the next item.
9. Disconnect the digital voltmeter.
10. Press the > key to select the next item (2262) and display
“262 AD CC”.
11. Press the X key and confirm that the adjustment value changes
from “CC” to “DD”.
If it changes to “BB”, IC401 (for charge IC) is fault.
12. Press the > key to select the next item (2263) and display
“263 AD CC”.
13. Press the X key and confirm that the adjustment value changes
from “CC” to “DD”.
If it changes to “BB”, IC401 (for charge IC) is fault.
14. Disconnect the power supply (AC adaptor).
15. Connect the resistor of the specified value (see table below) to
the battery terminals (CL431: BATT+, CL432: BATT−), and
then connect the AC adapter again, and enter the test mode.
16. Select item number 2264 through the operation similar to steps
2 to 8.
17. Press the X key and confirm that the adjustment value changes
from “CC” to “DD”.
If it changes to “BB”, IC401 (for charge IC) is fault.
18. In the same manner, exchange the resistors with the power
supply disconnected, and confirm that the adjustment value is
“CC” in each item number.
Note: Be sure to disconnect the AC adapter when exchanging the resistors.
Doing so with the power supply connected causes a trouble.
Item No.
2262
2263
2264
2265
2266
2267
Display
262 AD **
263 AD **
264 AD **
265 AD **
266 AD **
267 AD **
Connecting Resistor
No resistor
No resistor
22 Ω (0.1 watts or more)
10 Ω (1.0 watts or more)
10 Ω (1.0 watts or more)
2.2 Ω (1.5 watts or more)
Table 3-5-1. Charge Adjustment Specifications
18
MZ-NH700/NHF800
Ver 1.1
3-6. Laser Power Check
Procedure:
1. In the test mode (Display Check mode), press the [VOL+] key
to enter the Manual mode.
2. Open the lid and press the . key continuously until the
optical pick-up moves to the most inward track.
3. Set the laser power meter so that the laser beam from the optical
pick-up aims at the objective lens of laser power meter at right
angle.
4. Press the [VOL--] key once to display as follows.
Display
9
DESIGN
Example of Calculation:
Item No.
Parameter
0211
0212
0213
0214
0215
0216
Pr_nominal 2.50 mW
Kr
−0.3 %/°C
Pw_nominal 7.35 mW
Kw
−0.4 %/°C
Prmin
1.9 mW
Pwmin
5.8 mW
Decimal
50
30
147
40
38
116
Result
Hexadecimal
32h
1Eh
93h
28h
26h
74h
Procedure:
1. In the test mode (Display Check mode), press the [VOL+] key
to enter the Manual mode.
2. Press the > key once, press the [VOL+] key once, and press
the > key once again to display as follows.
Display
5. Press the > key three times to select the item number 9111
and display as follows.
210
DiscPr
Display
111
###S**
6. Confirm that the value of laser power meter is 0.67 mW ±
21%.
7. Press the > key to select the item number 9112.
8. Confirm that the value of laser power meter is 0.76 mW ±
18%.
9. Press the > key to select the item number 9113.
10. Confirm that the value of laser power meter is 6.25 mW ±
12%.
11. Press the x key four times and back to the Display Check
mode.
3-7. Setting The Adjustment Values
3-7-1. Hi-MD3 setting
Preparation:
1. Perform calculation every item based on the data given by the
Hi-MD3 adjustment disc by referring to the following table.
(Round off the value in decimal place)
2. Convert the calculated value into hexadecimal number.
Note: The Hi-MD3 adjustment parameters vary depending on the disc,
and therefore use the parameters of the disc used when performing
the adjustment.
3. Press the > key once to select the item number 0211.
4. Adjust with [VOL+]/[VOL--] keys so that the adjustment value
of LCD becomes calculated value.
5. Press the X key to write the adjusted value.
6. Press the > key to next item.
7. Repeat adjustment from step 4 until item number 0216.
3-7-2. Other setting
1. In the test mode (Display Check mode), press the [VOL+] key
to enter the Manual mode.
2. Press the > key five time to select the item number 0113
and display as follows.
Display
113
###S**
adjustment value (hexadecimal)
3. Press the [VOL+]/[VOL--] key and set the according value to
each model type and destination referring to the following
table.
4. Press the X key to write the adjusted value.
Destination
Item No.
0211
(*1)
0212
0213
(*2)
0214
0215
0216
Calculating formula (*3)
Pr_nominal / 0.05
Por / 0.05
Kr × (−100)
Pw_nominal / 0.05
Ppw / 0.05
Kw × (−100)
Prmin / 0.05
Pwmin / 0.05
*1) If the “Pr_nominal” value is indicated, use the “Pr_nominal” value
and not used “Por” value.
*2) If the “Pw_nominal” value is indicated, use the “Pw_nominal” value
and not used “Ppw” value.
*3) Round off after the decimal point.
US
Canadian, Australian
AEP, UK, East European
E18, Hong Kong, Korean,
Chinese, Tourist
E91, Mexican
Model Type
MZ-NH700
MZ-NHF800
−
50
20
30
A0
B0
25
34
20
−
• Abbreviation
E18: 100V - 240V AC area in E model
E91: 220V AC area in E model
Table 3-7-2. Mode Type and Destination Setting
Table 3-7-1. Hi-MD3 adjustment parameter
19
MZ-NH700/NHF800
Ver 1.1
3-8. Servo Overall Adjustment
Note1: Be sure to adjustment so that the set is horizontal and the LCD is
upside. Unless performed in that state, it is not adjusted correctly.
Note2: If NG is displayed in the middle of this adjustments, perform “3-2.
Initialize The Adjustment Value” and “3-7. Setting The Adjustment
Values” again, then retry this adjustments from step 1.
Procedure:
1. Insert the full charged Ni-MH rechargeable battery (NH10WM), then open and close the lid and enter the test mode
(Display Check mode).
2. Press the [VOL--] key to enter the Overall Adjustment mode.
3. Insert the CD adjustment disc (TDYS-1).
4. Put the main unit horizontal so that the LCD becomes upside,
and press the . key.
5. Wait until “CD OK” is displayed on the LCD.
6. Insert the MD1/HiMD1 hybrid adjustment disc
(MDW-74/GA1).
7. Put the main unit horizontal so that the LCD becomes upside,
and press the > key.
8. Wait until “MD1 OK” is displayed on the LCD.
9. Insert the Hi-MD3 adjustment disc (HMD1GSDJ).
10. Put the main unit horizontal so that the LCD becomes upside,
and press the [VOL+] key.
11. Wait until “HMD OK” is displayed on the LCD.
12. Eject the disc.
13. Put the main unit horizontal so that the LCD becomes upside,
and press the [VOL--] key.
14. Wait until “OfstOK” is displayed on the LCD.
15. Press the x key and back to the Display Check mode.
3-9. Resume Clear
Procedure:
1. In the test mode (Display Check mode), press the [VOL+] key
to enter the Manual mode.
2. Press the [VOL+] key once, press the > key once, press the
[VOL--] key once, press the > key once, and press the [VOL+]
key twice, press the > key three times to select the item
number 1933.
3. Press the X key to resume clear.
4. Press the x key four times and back to the Display Check
mode. And remove the Ni-MH rechargeable battery.
3-10. Releasing The Test Mode
Refer to the “SECTION 4. TEST MODE”.
Note: Once the test mode is activated with this application, the test mode
is then activated forcibly by only turning on the power.
After the repair completed, be sure to release the test mode by using
this application once more.
20
MZ-NH700/NHF800
SECTION 6
DIAGRAMS
6-1. BLOCK DIAGRAM – MD SERVO Section –
OVER WRITE HEAD DRIVE
IC601 (1/2)
HR601
OVER
WRITE
HEAD
M703
OVER WRITE
HEAD
UP/DOWN
RF AMP, FOCUS/TRACKING ERROR AMP
IC501
56 IY
1 IX
54 JX
55 JY
50 A
51 B
IY
IX
JX
JY
A
B
C
D
52 C
49 D
15 A_C
14 D_C
17 PDO_SOURCE
IIN
OPTICAL
PICK-UP
BLOCK
(ABX-U)
82 OUTB
245 175 182 158
145 VIN
RFO 8
RF BUFFER
Q504
101
RFI
TO IC801 (2/3)
(AUDIO SECTION)
ABCD 40
108 ABCD
FE 41
109 FE
TE 42
114 TE
ADFG 23
153 ADFG
PD-NI 19
142 APCREF_DA
CLK 26
174 FS256_OUT
SYSTEM CONTROLLER,
DIGITAL SIGNAL PROCESSOR
IC801 (1/3)
180 OFTRK
VC 38
123 VREF_MON
VREF09 9
PEAK 48
BOTM 47
110 VC
SBUS 33
SCK 32
S-MON 21
251 SSB_DATA
252 SSB_CLK
113 SE
XRESET 35
225 XRF_RST
106 PEAK
107 BOTM
S0
209 PF1/S0DO
210 PF2/S1DO
254 LDPEN
272 XLSRCK
S1
PLSE_XDC
CONT
FOCUS/TRACKING
COIL DRIVE,
SPINDLE/SLED
MOTOR DRIVE
IC701
TRK+
TRK–
FCS+
FCS–
TRK+
TRK+
32, 33 FO2
35, 36 RO2
FI2 30
RI2 29
155 TFDR
154 TRDR
16, 17 FO1
13, 14 RO1
FI1 19
RI1 20
156 FFDR
157 FRDR
UI2 50
VI2 49
WI2 48
216 SLD_MON
172 SRDR
167 SLDV
168 SLDW
TRK–
TRK–
39, 40 UO2
27 CPUI2
42, 43 VO2
26 CPVI2
46 WO2
25 CPWI2
28 COM2
FCS+
FCS+
U
FCS–
FCS–
L1
L2
M
20 PD_BUF
18 PD_I
MVCC
PVCC
VCC
EFM_CLK 63
LATCH 56
84 OUTA
NPPO 43
OFTRK 45
F
EFM 62
FS4
11 RF_IY
10 RF_IX
13 RF_JX
12 RF_JY
ADIP_IN 39
CLK
CLK 60
EFMO
7 VREF10
HB
HBB
HA
HAB
XCS_REC_DRV
CHOPPERCLK
VREF
77
69
78
70
OVER WRITE
HEAD DRIVE
Q601, 602
M702
(SLED)
W
V
MDVCC
REG2 B+
REG3 B+
PWM2 51
159 SFDR
ST2 45
289 HI_Z_SLO
UI1 63
VI1 64
WI1 1
232 SPDL_MON
160 SPRD
162 SPDV
163 SPDW
L1 B+
L2 B+
UO1
9, 10
22 CPUI1
VO1
6, 7
23 CPVI1
U
M701
(SPINDLE)
W
PWM1 62
3 WO1
24 CPWI1
21 COM1
V
ST1 4
CPVO1
CPUO1
CPWO1
CLV MON W
21
CLV MON V
CLV MON U
59 60 61
MZ-NH700/NHF800
21
CPVO2
CPUO2
54 53 52
SLD MON V
SLD MON U
• SIGNAL PATH
: PLAYBACK
: REC
SLD MON W
CPWO2
STALL 55
161 SPFD
290 HI_Z_SPDL
238 XRST_MTR_DRV
SLCU 169
SLCV 170
SLCW 171
SPCU 164
SPCV 165
SPCW 166
SLD MON U
SLD MON V
SLD MON W
CLV MON U
CLV MON V
CLV MON W
A
(Page 23)
MZ-NH700/NHF800
6-2. BLOCK DIAGRAM – AUDIO Section –
REFERENCE VOLTAGE
SWITCHING
Q351
HEADPHONE
AMP
IC352
• SIGNAL PATH
13
VREF_IN
: PLAYBACK
AOUTL
22 INA
147
FROM IC801 (1/3)
(MD SERVO SECTION)
OUTA 2
BEEP_OUTA 24
AOUTR
: LINE IN
: USB input from PC
OUTB 4
21 INB
148
: OPTICAL IN
J352
i
J301
: USB output to PC
BEEP_OUTB 23
MT_SW
PW_SW
BEEP_IN
LINE IN
(OPT)
173 DIN
B+ SWITCH
Q301
RVDD
VB
: MIC IN
F351
RVDD
VB
DTCK
KEY-R
STAT
RGND
F1
17 18 15
VC01 B+
A/D CONVERTER, MIC AMP
IC301
XMUTE/MUTE 212
SDT0 7
MCLK 9
BCLK 8
LRCK 10
PDN 14
28 LIN
1 RIN
18 PREL
19 PRER
J302
PF3/RTG3 211
307 ADDT
306 FS256
309 XBCK
308 LRCK
190 XPD_ADC
BEEP 199
DTCK 313
RMC_KEY 131
RADIO_ON 134
RMC KEY
D (Page 23)
CDTI 11
CCLK 12
AVDD
MIC
(PLUG IN POWER)
CSN 13
189 XCS_ADC
3
+1.2V
REGULATOR
IC302
DATA+
UDP 314
UPUEN 318
UDM 315
3
2
DATA–
CN451
(USB)
1
REG1 B+
VBUS
VBUS
200 XOPT_CTL
E (Page 23)
185 OPT_DET
186 XJACK_DET
187 XMIC_DET
310
311
OSCI
OSCO
REC_KEY/DOWNLOAD
SI1
SO1
SCK1
XCS_LCD
SET_KEY_1
SET_KEY_2
JOG_A
JOG_B
XHOLD_SW
PAUSE_KEY
XRST_LCD
HALF_LOCK_SW/
OPEN_SW
OPEN_CLOSE_SW
PROTECT
HIMD_PROTECT
SYSTEM CONTROLLER,
DIGITAL SIGNAL PROCESSOR
IC801 (2/3)
128
133
213 214 215 236
124 125 248 249 227 183
192
135
188
184
253
REG VSTB B+
EEPROM
IC892
4
3
2
1
SI0 195
SO0 196
SCK0 197
XCS_NV 239
DO
DI
SCK
XCS
SDO0
SCK0
320
UOSCO
193 USB_WAKE
319
WK_DET
WAKE UP SWITCH
Q803
X802
22.5792MHz
UOSCI
X801
48MHz
SDO0, SCK0
F
(Page 23)
DDC3 B+
–2
VB B+
RST
S892
HALF
LOCK
XWK2
XWK4
XWK1, XWK2,
XWK4
XWK1
LCD
MODULE
SET_KEY_1
SET_KEY_2
JOG_A
JOG_B
HOLD
PAUSE
SDI
SDO
SCK
CS
T_MARK
XWK
(Page 23)
C
–1
DDC3 B+
XRST2
DVDD
B
RESET
SWITCH
Q471
+2.4V
REGULATOR
IC471
(Page 23)
MZ-NH700/NHF800
22
22
S893
OPEN/CLOSE
DETECT
S894–1
PROTECT
DETECT
S894–2
Hi-MD
PROTECT
DETECT
MZ-NH700/NHF800
6-3. BLOCK DIAGRAM – POWER SUPPLY Section –
F
SDO0 SCK0
SDO0
SCK0
(Page 22)
B
XRST2
(Page 22)
RESET SIGNAL
GENERATOR
IC902
OR GATE
IC605
91 DVDD_OUT
REG4 B+
+1.2V
REGULATOR
IC604
REG5 B+
D609
D610
98 REG_OUT
61 VIF
13 VC
14 VC
VC B+
VC
B+
+1.2V
REGULATOR
IC602
REG F B+
B+ SWITCH
RVDD
Q352, 353
12 VO1
10 VC1
24 VG
11 VCO1
40 VCO2
9 VSTB
57 VREF
REG1 B+
REG2 B+
REG3 B+
VREC B+
B+ SWITCH
Q502, 503
MDVCC
54 REGO1
51 REGO2
47 REGO3
B+ SWITCH
Q801, 802
108 V33RO
+3V
REGULATOR
IC502
DDC3 B+
LVB 7
VB 27
FCRAM_VDD
LG 25
FFCLR
L1 13
L1 14
B+ SWITCH
Q901
POWFB 46
21 V3O_1
22 V3O_2
28 V3FB
VBUS_DET 250
USBHOLD 316
SUSPEND 317
51 VBUS_DET
86 HOLD_OUT
99 SUS_IN
RST_CONT 132
95 RST_IN
VB B+
VBUS B+
DC IN B+
SYSTEM CONTROLLER
IC801 (3/3)
DRAM_
HOLD_DET
D885
REG5 B+
+2.1V
REGULATOR
IC882
DC/DC
CONVERTER
IC881
VB B+
VOLTAGE
DETECT
Q884
DW_2T 43
DW_2B 44
DRAM_
VDD_CLR
REGULATOR
CONTROL
Q883
REGULATOR
CONTROL
Q881
D882
DRAM_ALONE
D883
D611
+3.2V
REGULATOR
IC603
VOLTAGE
LIMITER
Q451, 452
VBUS
E
(Page 22)
UP_1T 9
UP_1B 10
DW_1T 3
DW_1B 2
B+ SWITCH
Q611
VB B+
B+ SWITCH
Q608
66 VG2
73 VG3
DDC3 B+
B+ SWITCH
Q901
D884
L2 37
L2 38
L3_2 25
L3_1 24
UP_3B 17
SWITCHING
Q612
VBUS 54
VPDRV 36
PVBUS 88
VBUSSEL 43
CLP 38
CLM 42
POWP1 37
POWP2 41
DC IN B+
DC IN DETECT
Q607
J402
DC IN 3V
THP401
VI 6
IN1– 12
I_CTL1 20
FFCLR
FCRAM_VDD
DRAM_HOLD_DET
DRAM_VDD_CLR
DRAM_ALONE
Q501
PWM_L1 299
PWM_L2 300
B+ SWITCH
Q603
205 226
219 73 256 257 207
FFCLR
FCRAM_VDD
DRAM_HOLD_DET
DRAM_VDD_CLR
DRAM_ALONE
L2 B+
D (Page 22)
B+ SWITCH
CONTROL
Q613
L1_1 7
L1_2 6
+2.5V
REGULATOR
IC804
L1 B+
B+ SWITCH
Q609
VBUS_VB_CTL
VREC_SEL
USB IF VDD
VRECO_1 5
VRECO_2 4
93 OSC_OUT
REG5 OSC B+
VB_MON 121
VBUS_MON 129
HIDC_MON 127
REC KEY
B+ SWITCH
Q614, 615
67 RECP
C (Page 22)
WAKE UP SWITCH
Q902
XWK1 5
REGI1 55
REGI2 52
REGI3 48
MDVCC_CTL 204
RECP 181
RECP_MON 231
A (Page 21)
XWK1, XWK2,
XWK4
VRMC 6
XWK3 3
VG 83
TSBV_IN 101
REG_IN 97
DVDD_IN 90
VSTB_IN 105
VREF_IN 18
VREC 112
VREC_IN 80
VREC_IN 81
CLK
POWER CONTROL
IC901
RVDD
POWER CONTROL
IC601 (2/2)
106 VSTB_OUT
102 TSBV_OUT
REG5 VSTB B+
REG5 TSBV B+
VG
B+
XWK4 2
XWK2 4
87 64 94 59 58
VOLTAGE
DETECT
IC606
DACVREFH 141
VCO2 VC01
B+
B+
64 SLEEP
59 STRB
34 XRST2
17 XRST1
DATA
SCK
VOLTAGE
DETECT
IC607
SLEEP_IN
RESET
SWITCH
Q618
VSTB
B+
CLK 63
SDO0
SCK0
+
RST_OUT
XRST 136
B+ SWITCH
Q616, 617
VBUSSEL2
YUZU_SLEEP
XCS_PWR_IC
XRST2_DET
218 233 229
58 DATA
60 SCK
CC_CTL/VI_CTL
CHG_PWM
CHG_I_CTL2
CHG_I_CTL3
CHG_MON
237
240
221
222
122
BATT_MINUS_MON 130
GND_SW 246
MZ-NH700/NHF800
23
4
7
29
23
22
CHARGE ON/OFF
CONTROL
Q407
VI_CTL
CHG_CTL
I_CTL2
I_CTL3
A/D
16 TYPE2
REGULATOR
Q401
D401
RF1 26
VO 32
DRY BATTERY
SIZE "AA"
(IEC DESIGNATION R6)
1PC. 1.5V
DC IN DETECT
Q433
BAT+ 31
CHG_SW1 30
+
CN451 (2/2)
(USB)
CHARGE CONTROL
IC401
CHG_TYPE2 255
23
–
COMPARATOR
IC402
CHARGE
CONTROL
Q432
GROUND LINE
SWITCHING
Q403, 406
MZ-NH700/NHF800
• Note For Printed Wiring Boards and Schematic Diagrams
Note on Printed Wiring Board:
• X : parts extracted from the component side.
• Y : parts extracted from the conductor side.
: Pattern from the side which enables seeing.
•
(The other layers' patterns are not indicated.)
Caution:
Pattern face side:
(Conductor Side)
Parts face side:
(Component Side)
Parts on the pattern face side seen from
the pattern face are indicated.
Parts on the parts face side seen from
the parts face are indicated.
• MAIN board is multi-layer printed board.
However, the patterns of intermediate-layer have not been included in this diagrams.
• Lead Layouts
surface
Lead layout of conventional IC
CSP (chip size package)
• Waveforms
Note on Schematic Diagram:
• All capacitors are in µF unless otherwise noted. (p: pF)
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and 1/4 W or less unless otherwise
specified.
•
f : internal component.
• C : panel designation.
Note:
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part
number specified.
1
IC501 8 (RFO)
(MD Play Mode)
7
IC301 8 (BCLK)
2.2 Vp-p
1.0 Vp-p
Note:
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce por tant le numéro
spécifié.
354 ns
500 mV/DIV, 500 ns/DIV
2
• A : B+ Line.
• Total current is measured with MD installed.
• Power voltage is dc 1.5 V and fed with regulated dc power
supply from battery terminal.
• Voltages and waveforms are dc with respect to ground in
playback mode.
no mark : PLAYBACK
∗
: Impossible to measure
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal production tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal production tolerances.
• Circled numbers refer to waveforms.
• Signal path.
E : PLAYBACK
j : REC
J : OPTICAL IN
F : LINE IN
d : USB input from PC
G : USB output to PC
N : MIC IN
• Abbreviation
EE
: East European model
IC501 ra (FE)
(MD Play Mode)
1 V/DIV, 100 ns/DIV
8
IC301 9 (MCLK)
2.5 Vp-p
Approx.
280 mVp-p
88 ns
1 V/DIV, 50 ns/DIV
100 mV/DIV, 500 ns/DIV
3
IC501 rs (TE)
(MD Play Mode)
9
Approx.
100 mVp-p
200 mV/DIV, 500 ns/DIV
4
IC801 <zb, (FS4)
2.6 Vp-p
88 ns
1 mV/DIV, 50 ns/DIV
5
IC801 <zmv (FS256_OUT)
2.3 Vp-p
5.7 µs
1 mV/DIV, 2 µs/DIV
6
IC801 <czz (OSCO)
2.6 Vp-p
44 ns
1 V/DIV, 20 ns/DIV
MZ-NH700/NHF800
24
24
IC301 q; (LRCK)
2.3 Vp-p
22.8 µs
1 V/DIV, 10 µs/DIV
MZ-NH700/NHF800
6-4. SCHEMATIC DIAGRAM – MAIN Section (1/9) –
• See page 36 for IC Block Diagram.
TRK+
TRK-
ZI2
(1/9)
XRST_MTR_DRV
XRST_MTR_DRV
SLD_CON_W
C714
0.1
SLD_CON_W
SLD_CON_V
SLD_CON_V
SLD_CON_U
SLD_CON_U
L701
0
SLD_PWM
L702
0
SLD_PWM
SLD_MON_U
SLD_MON_U
SLD_MON_V
SLD_MON_V
SLD_MON_W
SLD_MON_W
SLD_CON_W
TF1
TF1
TR1
TR1
R706 2.2k
ZI2
R707 2.2k
ZI1
R708 2.2k
FR1
ZI2
ZI1
M702
V
FF1
FF1
FO2
PGND2
RO2
RO2
VMU2
VMR2
UO2
UO2
VO2
PGNDUV2
VO2
ST2
VMVW2
VI2
SLD_CON_U
WO2
WI2
SLD_CON_V
PGNDW2
R713 1k
CN701
10P
SLEDW
W
C703 0.047
C701 0.047
N
C702 0.047
U
CLV_CON_W
CLV_CON_V
CLV_CON_V
TF1
CLV_CON_U
TR1
CLV_PWM
FI2
PWM2
SLD_MON_U
SLEDU
CLV_CON_W
C716
0.1
FO2
VMF2
UI2
SLD_PWM
SLEDV
CLV_CON_U
RI2
CPUO2
CLV_PWM
SLD_MON_V
CLV_MON_U
SLEDN
COM2
CPWO2
CPUI2
STALL
CPVI2
CLV_MON_U
CLV_MON_V
HD_DRV-
OVER WRITE
C712
0.1
HD_DRV+
HEAD UP/DOWN
XRST_MTR_DRV
CLV_MON_W
FOCUS/TRACKING COIL DRIVE,
C713
0.1
CLVU
VCC
SPINDLE/SLED MOTOR DRIVE
VG
IC701
BD6607KN
CLV_MON_W
N
CPWI1
CPVI1
CPWO1
CPUI1
CPVO1
COM1
CPUO1
RI1
PWM1
FI1
CLV_MON_V
C710 0.022
0.022
C709 0.01
C708
0.022
C707 0.01
C706
C705 0.01
CLVN
V
CLV_MON_W
CPWI2
GND
CLVV
(SPINDLE)
CLV_MON_V
R712 0
CLVW
M701
W
CPVO2
SLD_MON_W
M703
U
(Page 32)
FR1
(SLED)
CLV_MON_U
FR1
CLV_PWM
FF1
CLV_CON_U
FO1
FO1
PGND1
RO1
RO1
VMR1
VMU1
UO1
UO1
PGNDUV1
VO1
VO1
VMVW1
ST1
WO1
WI1
PGNDW1
VI1
R709 10k
R710 10k
C717
0.1
VMF1
UI1
CLV_CON_V
A1
R711 10k
A2
A3
A4
CLV_CON_W
(Page 26)
ZI1
BP701
A5
FCS+
B3
B2
B1
FCS-
C715
0.1
(Page 27)
MZ-NH700/NHF800
25
25
MZ-NH700/NHF800
• See page 36 for IC Block Diagrams.
6-5. SCHEMATIC DIAGRAM – MAIN Section (2/9) –
(2/9)
XCS_REC_DRV
C673
0.1
SUSPEND
SUSPEND
USB_HOLD
REG_DACVREFH
C643
2.2
+1.2V REGULATOR
IC606
XC61CN1702NR
D609
MA2Z748001S0
VBUS_DET
SCK0
4FS
EFM
D610
MA2Z748001S0
SDO0
RECP
HAB
EFM_CLK
VOLTAGE DETECT
HBB
HA
REG_F
C669 1
HB
USB_HOLD
C668 1
RECP
RECP
EFM_CLK
EFM_CLK
EFM
EFM
XCS_REC_DRV
XCS_REC_DRV
VBUS_DET
(Page 32)
VBUS_DET
R663 220k
+1.2V REGULATOR
R662 470k
NC
IC604
R1180Q121C-TR-FA
C625
0.1
C636
0.1
VBUS_VB_CTL
C630
0.1
VREC_SEL
VOUT
VREC_SEL
VDD
RST_CONT
C619 1
VOUT
VDD
VSS
R643
0
IC602
R1160N121B-TR-F
VOUT
VIN
GND
ECO
GND
NC
CE
C601
1
RST_CONT
SDO0
SDO0
SCK0
C621
10
4V
R652
0
R659
100k
SCK0
4FS
R628
22
4FS
SLEEP
-1
SLEEP
RMC_DTCK
R618
100k
-2
R678
0
Q617
XP4601-TXE
R660
470k
Q616,617
R661
470k
RMC_DTCK
XRST
XRST
-1
Q608
XP4314-TX
R608 1
-2
RADIO_ON
RADIO_ON
B+ SWITCH
B+ SWITCH
R619 100k
A1
A2
USB_HOLD
Q607
2SC4738FY/GR(TPL3)
R609 100k
DC IN
R601 220k
3.3V
3.3V
REG5_VSTB
SCK
VIF
CLK
DATA
EFM
EFM_CLK
PGND4
RST_OUT
VBUSSEL2
VG3
GND
RECP
CH
HAB
HBB
GND
CL
VCP
VG2
PGND4
HB
HA
PGND2
HOLD_OUT
VRECIN
VRECIN
VG
NC_AI2
D614
MA2SD32008S0
Q616
SI1410EDH-T1
OUTB
OUTA
S
REG5_REG
NC_M12
REG5_REG
REG5_OSC
R646
47k
LATCH
REG5_OSC
REG4_DVDD
XWKO
REG4_DVDD
REG_F
VBUS
REG_F
C612 22 6.3V
REG_DACVREFH
C602
REG4_DVDD
C613
(Page 31)
REG5_VSTB
DETECT
PVBUS
WAKEC
CRST
V33UO
REG_DACVREFH
0.1
DVDD_IN
VBUS_DET
DVDD_OUT
VBUSREF
R681
1M
22 6.3V
C604
S
C644
4700p
0.1
HOLDC
VB
Q611
SI1410EDH-T1
DDC3
B+ SWITCH
L5_2
REG5_OSC
OSC_OUT
OR GATE
R679 220
XRST
C614 22 6.3V
(Page 25)
VSS
VOUT
POWFB
PGND2
C677
0.1
L5_1
REG_IN
PGND5
REG_OUT
VBUSSEL
L607
47µH
REG5_REG
C675 0.01
C671
0.1
R653
22k
D601
C607 1 MA2SD32008S0
SUS_IN
OVER WRITE HEAD DRIVE,POWER CONTROL
PGND2
IC601
SC901585VAR2
TSBV_IN
*
INP3
TSBV_OUT
CSP(Chip Size Package)
INP2
C616 22 10V
R685
10k
R665
0
VD33R
CLP
PGND1
POWP1
VSTB_IN
VPDRV
R649
1
R648
1
C658
47
6.3V
C666 4.7
R675
2.2M
D613 MA2SD32008S0
REG5_VSTB
VSTB_OUT
C672
4.7
RF2
C609 1
BATSEL
DTC2
V33RO
INM2
RF1
INM3
INM1
DTC3
DW_3B
DW_3T
L3_2
L3_1
33USEL
V30_2
V30_1
PGND3
PGND3
VREFIN
UP_3B
PGND1
PGND3
VC
VC
PGND1
GND
UP_1B
UP_1T
INP1
VRECQ_1
VREC
L1_1
DTC1
NC_A1
L1_2
C611 0.01
Q618
XP4601-TXE
VRECQ_2
R605 C620
1k 0.047
-2
DW_1T
R683
1M
DW_1B
DETECT
R682
1M
-1
D604
MA22D2800LS0
CLM
POWP2
3.3V
VOLTAGE
R684
10k
R677
0
SUSPEND
R647
1M
VIN
PGND5
RST_IN
R654 1M
GND
NC
SLEEP_IN
RST_CONT
VCC
IC607
XC61CN8902NR
PGND5
R645 470k
SLEEP
IC605
TC7S32LFU(TE85R)
C641
0.01
R616
1k
C642
0.047
R617
1k
L608
47µH
R664
2.2
RF3
R629
2.2M
NC_M1
V3FB
RESET
SWITCH
R670
0
A3
R612 2.2M
HB
C645
0.01
R671
0
HBB
HA
C638
2200p
R680
0
L605
22µH
Q601,602
OVER WRITE
R622
2.2
R620
2.2
R621
2.2
HEAD DRIVE
R623
2.2
D603 MA2Z748001S0
CL604
L603
10µH
Q612
SSM3K01F(TE85L)
L601
C627
47
6.3V
C622
47
6.3V
C635
47
6.3V
C634
1
W602
D607
MA22D17
Q603
TS8K1TB
C674
33p
B+ SWITCH
D611
MA2Z748001S0
Q609
NTHD4508NTIG
C661
2.2
C653
10
6.3V
SWITCHING
C676
1000p
C649
0.1
C650
10
6.3V
R641
1M
B+ SWITCH
S2
D1
G1
D1
S1
Q615
SI1410EDH-T1
NC
+3.2V REGULATOR
CE
G2
D2
GND
S
D2
VDD
D616 MA22D17
-1
S
S
R638
220k
R640
220k
VOUT
D615
MA22D17
-2
C637
10
6.3V
TERRA_V
HEAD
Q601
CPH5614-TL-E
S
CL658
R673 0
R635 0
D606
MA22D17
W601
HR601
C628
1
C633
0.01
L606
10µH
Q602
MCH6617-TL-E
OVER WRITE
D602
MA2Z748001S0
R625 470k
C648 0.047
D608
MA2SD30
S
-2
S
R668
0
-1
D605
MA2SD30
C646
0.047
R624 470k
A5
-1
IC603
XC6209B322MR
Q613
2SK1830-TE85L
-2
Q614
XP4601-TXE
S
S
VREC_SEL
HAB
A4
B+ SWITCH
C652
10
6.3V
C660
0.1
CONTROL
R636
470k
R639
1M
R642
100k
Q614,615
B+ SWITCH
R657
0
C1
R650
4.7
C2
(Page 28)
D2
D1
F1
(Page 27)
C3
REG5_VSTB
F2
(Page 29)
MZ-NH700/NHF800
26
26
E13
E11
E10
E9
E7
E8
E6
E5
E4
E3
E2
E1
(Page 30)
MZ-NH700/NHF800
• See page 24 for Waveforms.
6-6. SCHEMATIC DIAGRAM – MAIN Section (3/9) –
• See page 36 for IC Block Diagram.
B3
B1
B2
(Page 25)
(3/9)
C3
VOUT
GND
VDD
CE
C528 0.1
C554
0.1
C2
(Page 26)
SSB_CLK
SSB_DATA
VREF
C530
1
XRST_RF
C524
0.01
ABCD
TE
C561
1
FE
IC502
R1180Q301B
R525 0
+3V REGULATOR
R526 0
C1
C523
0.1
C553
4.7
6.3V
S0
R505
10
S0
S1
L503
10µH
S1
XLDON
C519
0.1
XLDON
PLSE_XDC
PLSE_XDC
LC_DRV1
C536
0.022
LC_DRV1
LC_DRV2
R561
220k
LC_DRV2
PEAK
PEAK
BOTM
C562
1
BOTM
OFTRK
LC_DRV2
C568
0.01
R508
2.2k
-2
-1
FCS+
R521
0
L1
L2
SWITCHING
RF AMP,
VPP_LPF
IC501
SN761059ZQLR
SMON
*
PD_BUF
CSP(Chip Size Package)
PD_NI
S
SSB_DATA
C547 0.047
SSB_CLK
SSB_DATA
(Page 32)
SSB_CLK
ADIP
ADIP
0.047
S_MON
S_MON
S_MON
APCREF_DA
APCREF_DA
C552 0.01
VC
VC
APCREF_DA
RFI
RFI
MDVCC_CTL
C538
1000p
PD_I
AVCC
JX
PDO_SOURCE
JY
PDO_SINK
MDVCC_CTL
A_FS256
A_FS256
RF_JX
VIN
A_C
REG03
D_C
RF_IY
RF_JY
RF_IX
C573
1000p
VREF09
IX
C570
4.7
10V
PS
PVCC
RFO
IY
VREF10
FB502
0
OFC_C2
VIN
R522
0
PLSE_XDC
IIN
XRST_RF
C545 0.1
C550
FOCUS/TRACKING ERROR AMP
A
B
XRST_RF
ADFG
D
OFC_C1
PLSE_XDC
CDN
EQ
XLDON
BOTM
C
Q501
MCH6604
FB501
CLK
CCSL2
PEAK
R504
100k
FCS+
CONT
OFTRK
TON_C
ADIP
S
TRK-
VREF
A_FS256
PEAK
C569
0.01
FCSTRK-
C537 1
CPGND
AGND
R503
100k
FCS-
ABCD
VREF
BOTM
CN501
26P
TRK+
FE
ABCD
OFTRK
C513
0.01
LC_DRV1
TRK+
TE
FE
CN
AVCC2
R507
2.2k
C539 1
CP
DVCC
SCK
SBUS
CPOUT
VGIN
DGND
XRESET
VC
CIG
ABCD
FE
TE
NPPO
ADIP_IN
OFTRK
L501
0
TE
LDK
MDVCC
GND
C521 10p
L507
10µH
VREF
VCC
S1
S1
C522 10p
F
C525
4700p
C531
0.01
C533
0.01
JY
JX
IY
C517 0.1
0.1
C
0.1
C511 0.1
B
C515
A
C516
IX
VC
D
S0
S0
R501
2.2k
R502
1k
L502
10µH
C527
0.1
C518
4.7
6.3V
C529
0.1
C557
0.1
C520
0.1
C556
4.7
6.3V
L504
10µH
MDVCC_CTL
FB503
0
L505
10µH
Q502
2SA2018TL
R514
47k
R517
10k
C559
4700p
L506
10µH
R512
0
R524
220
Q502,503
B+ SWITCH
R513
10k
R515
10k
Q504
2SC4627J-C
(TX).SO
R509
0
C555
4700p
C565
0.1
R511
0
R520
470
RFI
RF BUFFER
C558
1000p
Q503
2SC4738F-Y/GR
(TPL3)
VIN
R516
47k
C560
0.1
C564
4.7
6.3V
R518
47k
R519
1k
C526
100p
C566
0.1
C567
4.7
6.3V
I1
I2
(Page 29)
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
MZ-NH700/NHF800
27
27
Les composants identifiés par une marque 0 sont
critiques pour la sécurité. Ne les remplacer que
par une pièce portant le numéro spécifié.
MZ-NH700/NHF800
• See page 36 for IC Block Diagram.
6-7. SCHEMATIC DIAGRAM – MAIN Section (4/9) –
(4/9)
UDP
UDP
UDM
UDM
UDP
UDM
(Page 32)
D1
D2
Q451
RTQ035P02TR
TERRA_V
(Page 26)
MINUS_MON
S
GND_SW
C453
0.047
VBUS_MON
CHG_I_CTL3
-2
CHG_I_CTL2
R463
220
R467
10k
R464
100k
-1
CHG_MON
VOLTAGE LIMITER
CHG_TYPE2
Q451,452
Q407
UN9214J-(TX).SO
CHARGE
CHG_TYPE2
CHG_I_CTL3
CHG_I_CTL2
CHG_I_CTL2
ON/OFF
CHG_MON
CONTROL
Q452
XP4601-TXE
CHG_TYPE2
CHG_I_CTL3
(Page 32)
CHG_MON
CHG_PWM
CHG_PWM
CL431
(BATT+)
C452
0.1
W403
DRY BATTERY
HIDC_MON
R466
2.2M
D458
MA8056-L-TX
HIDC_MON
DATAC455
2200p
DATA+
CL460
(VBUS GND)
IO
GND
CHG_SW1
R447
0
-1
C456 2200p
C429 0.1
C458 0.1
C415
0.1
LED_CTL
PWR_WAKE
I_SEL
PGND
Q403,406
Q406
XP4601-TXE
GROUND LINE
COMPARATOR
SWITCHING
FB452
SW_B
C459 0.1
-2
WDT
CHG_CTL
V0
VI
R433
0.47
CHG_SW2
BAT+
R432
1
R455
1M
C461
0.1
TYPE1
R422 1M
S
SW_A
C460
0.1
IN1-
IC401
MM1655NCBE
VI_CTL
VBUS
CHARGE CONTROL
I_CTL2
R423 220k
PWT
FB451
A7CAL_SW
AMP_SEL
CHARGE
VI2
(USB)
LF451
D457
MA22D2800SL0
CL453
(VBUS 5V)
CFB
IAMP_CTL
VG
CN451
7P
R436
220k
TYPE2
IAMP_CAL
CONTROL
R424 470k
Q403
SI1410EDH-T1
AD_SEL
RF1
Q432
FZT688B-TP
C430 1000p
D440 MA22D2800SL0
C427
0.1
D441
MAZS068008SO
C425
0.1
D435
MAZS068008SO
BAT-
GND
R446
0
CL432
(BATT-)
I_CTL1
RS
W404
1PC. 1.5V
A/D
C438
0.1
C424
220
5V
I_CTL3
C423
220
5V
SIZE"AA"
(IEC DESIGNATION R6)
R462
220k
C402
220
5V
C403
220
5V
R421
100k
R441
100k
R443
100k
R456
470k
IC402
NJU7008F3
C434
0.1
R425
2.2k
R438
100k
R454
0
Q433
2SC4738FY/GR
(TLP3)
C574
0.1
R442
100k
DC IN
CHG_PWM
R444
100k
G1
DETECT
R437
220k
G2
C457
0.1
G3
HIDC_MON
(Page 29)
THP401
R418
100k
R420
4.7k
Q401
FZT968TA
C426
22
16V
REGULATOR
D401
MA22D2800LS0
R434 1M
C420
0.1
C421 0.1
R419
10k
C411 22 16V
C419
0.1
D439
MA22D2800LS0
M2
C412 0.1
J402
DC IN 3V
R435 0
C407 0.1
LF401
C408 0.1
M1
(Page 33)
C406
0.1
H1
D436
MAZS068008SO
CL433
(GND)
C416
0.1
(Page 30)
MZ-NH700/NHF800
28
28
MZ-NH700/NHF800
• See page 36 for IC Block Diagram.
6-8. SCHEMATIC DIAGRAM – MAIN Section (5/9) –
E13
E11
E9
E10
E7
E6
E8
E4
E5
E3
E1
E2
(Page 26)
(5/9)
I1
I2
J1
(Page 27)
J2
J3
C922
100
6.3V
C958
1
C923
47
6.3V
WK_DET
RMC_KEY
C927
100p
C926
1000p
C915
10
6.3V
L9001
10µH
J4
HALF_LOCK
REC_KEY
XRST2
L903
10µH
C928
100p
C929
1000p
R954
470k
R955
2.2k
VIN
VSS
VOUT
R920 470k
R922 100k
R918 470k
-1
WAKE UP
SWITCH
R958 47k
R912
220k
C961
0.1
R908
22k
-2
Q902
XP4601-TXE
R959 470k
NC
D904
MA2Z748001S0
L906
47µH
R917 220k
R914 10k
RESET SIGNAL GENERATOR
IC902
XC61CC1702NR
C954 1000p
D906
MA22D2800LS0
R960
0
C960
0.1
R910
22k
R924
470k
C902 0.1
C903
0.01
XRST1
FFCLR
XWK4
XWK3
XWK1
XWK2
LVB
HVB
VC1
VSTB
VCO1
L1
VO1
L1
VRMC
R906
47k
PGND1
R903
1M
C909
22
16V
PGND1
C901 0.1
R931 0
SLEEP
4FS
CRST1
CLK
SL901
SEQSEL
XRST1ADJ
C931 2.2
DTC1
WDT
RF1
SCK
INM1
STRB
CTL
DATA
VG
VREF
SCK0
C918
0.047
C906
1
XCS_PWR_IC
SDO0
(Page 30)
C932 0.01
LG
POWER CONTROL
PGND3
IC901
SC901584EPR2
L901 100µH
C933
2.2
C939
22
6.3V
R925
47k
R933
220k
R934
22k
C940
22
6.3V
REGC2
REGI3
REGO3
REGC3
MUTEON
DW_2B
R907
10k
DW_2T
DTC2
R904
1M
VC2
REG2G
VCIN
RF2
VCO2
REGO2
L2
REGI2
INM2
L2
VGSEL1
PGND2
C919
0.022
R964
100k
REGC1
PGND2
G1
VGSEL2
XRST2
CL935
REGI1
REGO1
CRST2
C959
0.1
R951
0
GND
VB
VO2
D902
MA2Z748001S0
R952
0
CL921
CL919
C908
0.01
R926
100k
R929
100k
C935
2.2
C936
2.2
R935
100k
R936
47k
R953
4.7
D905
MA2Z748001S0
CL931
L904
10µH
R927
1k
L907
47µH
R930
47k
C948
22
6.3V
C937 2.2
R937 22k
R938 47k
(Page 28)
Q901
TS8K1TB
B+ SWITCH
G2
C916
10
6.3V
C920
0.1
J5
S
S
G3
L2
C924
47
6.3V
L1
(Page 33)
MZ-NH700/NHF800
29
29
MZ-NH700/NHF800
• See page 36 for IC Block Diagram.
6-9. SCHEMATIC DIAGRAM – MAIN Section (6/9) –
F1
F2
(Page 26)
(6/8)
J1
J2
J3
J4
C354
4.7
4V
BEEP
XHP_STBY
MUTE
R352
220k
Q353
SI1410EDH-T1
R356
100k
Q351
2SC4738F-Y/GR
(TPL3)
S
REFERENCE
AOUTL
AOUTL
AOUTR
R353
22k
AOUTR
XHP_STBY
-1
XHP_STBY
-2
R253 10k
MUTE
Q352,353
MUTE
B+ SWITCH
Q352
XP4314-TX
BEEP
BEEP
R358
2.2M
R254 10k
R154 10k
R354
10k
R153 10k
C251 4700p
C252 2200p
C151 4700p
C152 2200p
VOLTAGE SWITCH
C351
1
(Page 32)
XRST2
XRST2
WK_DET
WK_DET
REC_KEY
REC_KEY
RMC_KEY
RMC_KEY
HALF_LOCK
HALF_LOCK
XCS_PWR_IC
AOUTR
(Page 29)
R257
1k
C253
*
R251
*
GND
BEEP_IN
BST_SW
MT_TC
MT_SW
XCS_PWR_IC
PW_SW
R258
2.2k
GND
C356
10
4V
LPF1
INB
BST_NF1
HEADPHONE AMP
AOUTL
* C153,253
BEEP_OUTB
BEEP_
OUTA
1 (US)
2.2
(EXCEPT US)
VCC2
F351
0.25A
125V
LPF2
F1
1.5A
63V
BST_NF2
J352
C355
2.2
BST_OUT
DET
R158
2.2k
R152
*
OUTB
R151
*
OUTA
C153
*
PWR_GND
IC352
TA2131FLG(EL)
INA
R157
1k
FB1
AGC_IN
RMC_DTCK
R355
1M
RVDD
FB355
* R152,252
4.7k
(US)
2.2k
(EXCEPT US)
(AEP,UK,EE)
R261
22
(US)
VB
C364
0.1
FB354
* R151,251
4.7k
DTCK
KEY_R
RMC_KEY
FB353
RADIO_ON
FB2
STAT
FB357
RGND
10k (EXCEPT US)
R359 0
R161
22
R162 0
R351
47
R262 0
C160
220
4V
L351
0
C352
10
6.3V
C353
0.1
(Page 31)
S_GND
VREF
VCC1
R252
*
VREF_IN
C154
0.22
C254
0.22
R160
*
C260
220
4V
R260
*
D352
NNCD6.8H-T1
* R160,260
R155
10
R255
10
R156
4.7k
R256
4.7k
0 (EXCEPT AEP,UK,EE)
10 (AEP,UK,EE)
J5
C361
0.01
H1
(Page 28)
MZ-NH700/NHF800
30
30
C363
0.1
D151
02DZ2.4-Z(TPH3)
D251
02DZ2.4-Z(TPH3)
MZ-NH700/NHF800
6-10. SCHEMATIC DIAGRAM – MAIN Section (7/9) –
• See page 36 for IC Block Diagram.
REG5_REG
REG5_VSTB
(7/9)
K1
R478
4.7k
R476
4.7k
R477
4.7k
K2
CN471
16P
K3
R486
0
DVDD
R471 0
JOG_B
R472 0
JOG_A
XRST2
K4
JOG_B
JOG_A
SET_KEY_2
SET_KEY_2
SET_KEY_1
SET_KEY_1
R473 0
REC_KEY
T_MARK
XCS_LCD
CS
D471 MA2Z748001S0
R489 100
SDI1
R490 100
SDO1
+2.4V REGULATOR
R491 100
SCK1
IC471
XC6219B242MR
SDI
LCD
MODULE
SDO
FB471 0
SCK
LCD_RST
NC
RST
CE
WK_DET
XWK
K5
VSS
R474 1k
XHOLD_SW
VOUT
HOLD
R475 0
VIN
PAUSE
C481
1
PAUSE
DGND
D473
MAZS068008SO
SGND
C480
2.2
C858
0.1
XRST2
XRST2
WK_DET
R483
470k
C860
0.1
R484
220k
WK_DET
REC_KEY
-1
REC_KEY
RMC_KEY
C476
1000p
RMC_KEY
HALF_LOCK
C478
0.01
Q471
XP1501-TXE
HALF_LOCK
RESET
XCS_PWR_IC
XCS_PWR_IC
(Page 30)
-2
R480
100k
S_GND
SWITCH
C479
0.1
(Page 32)
R485
470k
GND
C892
0.1
REG5_REG
SL891
PROTECT
R894
100k
S894-1
S894
VREC_SEL
PROTECT
-1
IC892
HN58X2564FPI
VREC_SEL
RST_CONT
HIMD_PROTECT
RST_CONT
SDO0
-2
SDO0
XCS
VCC
SO
XHOLD
DETECT
SL892
4FS
4FS
XWP
SCK
GND
SI
S894-2
Hi-MD PROTECT
R895
100k
SCK0
SCK0
DETECT
SLEEP
SLEEP
R897
0
RMC_DTCK
RMC_DTCK
RADIO_ON
S892
(HALF LOCK)
HALF_LOCK
RADIO_ON
XRST
XRST
EEPROM
S893
(NOT SUPPLIED)
(OPEN/CLOSE DETECT)
(Page 26)
SCK0
SDO0
REG5_VSTB
SDI0
3.3V
3.3V
REG5_VSTB
XCS_NV
OPEN_CLOSE_SW
SL894
REG5_REG
REG5_REG
REG5_OSC
REG5_OSC
REG4_DVDD
REG4_DVDD
REG_F
REG_F
REG_DACVREFM
REG_DACVREFM
VB
K6
DDC3
MZ-NH700/NHF800
31
31
MZ-NH700/NHF800
Ver 1.1
• See page 40 for IC Pin Function Description.
• See page 24 for Waveforms.
6-11. SCHEMATIC DIAGRAM – MAIN Section (8/9) –
(8/9)
K1
C861
0.1
K2
K3
K4
POEN_CLOSE_SW
ADDT
FS256
LRCK
LRCK
XBCK
CLV_PWM
REG5_REG
CLV_CON_V
CLV_CON_W
CLV_MON_U
SLD_CON_V
CLV_MON_V
CLV_MON_W
SLD_MON_U
SLD_MON_V
SLD_CON_W
DIN1
SLD_CON_U
EFM
R879
47
SLD_MON_W
EFM_CLK
A_FS256
R813
220
OFTRK
PAUSE
OPT_DET
PROTECT
R861
22
R827 100
R878
47
XJACK_DET
XCS_ADC
XMIC_DET
LCD_RST
XPD_ADC
SDO0
SDI0
SCK0
BEEP
XOPT_CTL
MDVCC_CTL
VBUS_VB_CTL
S1
S0
MUTE
SDI1
XHP_STBY
SDO1
SCK1
SLEEP
SLD_CON_U
CHG_I_CTL3
CHG_I_CTL2
XRST_RF
VREC_SEL
XHOLD_SW
RECP
XRST2
CLV_CON_U
R843
2.2k
ADDT
FS256
R880
47
FB803
XOPT_CTL
XOPT_CTL
DRAM_ALONE
DIN1
DIN1
FFCLR
XJACK_DET
C847
0.1
R868
0
SL801
XJACK_DET
RMC_DTCK
OPT_DET
OPT_DET
XCS_PWR_IC
SCK0
XCS_LCD
SDO0
XCS_NV
GND
SCK0
XRST_MTR_DRV
CHG_PWM
K6
SDO0
(Page 33)
WK_DET
K5
(Page 31)
R876 0
Q803
2SC4738F-Y/GR
(TPL3)
R842
47k
WAKE UP
SWITCH
VDR801
XBCK
GND_SW
JOG_B
VBUS_DET
VBUS_DET
JOG_B
VBUS_DET
VBUS_DET
(Page 26)
VBUS_VB_CTL
SSB_DATA
IAMP_CAL
VBUS_VB_CTL
SSB_DATA
SSB_CLK
NC
SSB_CLK
CHG_PWM
HIMD_PROTECT
CHG_MON
PLSE_XDC
SPCU
SPCV
SPDW
SPCW
SLDV
SLDW
SLCU
SLCV
SLCW
DIN
SRDR
FS256_OUT
CHOPPERCLK
MNT2
MNT0
MNT3
MNT1
OFTRK
RECP
EFMO
PAUSE_KEY
OPT_DET
PROTECT
XMIC_DET
XJACK_DET
XCS_ADC
XPD_ADC
NC
XRST_LCD
USB_WAKE
A7CAL_SW
SI0
SO0
SCK0
XGUM_ON
BEEP
XOPT_CTL
LAM_SPREQ
LAM_REQCHK
4FS
FR1
FRDR
FF1
FFDR
XCS_LCD
JOG_A
CC_CTL/VI_CTL
JOG_A
XCS_REC_DRV
XCS_REC_DRV
XRST_MTR_DRV
CHG_PWM
CS_RTC
XCS_NV
CHG_TYPE2
SLD_PWM
TF1
SPFD
GND_SW
EFM
CLV_CON_U
FS4
SPDV
EFM_CLK
EFM
OPEN_CLOSE_SW
RECP
EFM_CLK
REC_LED/ACCESS_LED
MDVCC_CTL
LAM_NAME
DRAM_ALONE
VBUS_VB_CTL
PF0
PF1/S0DO
PF2/S1DO
PF3/RTG3
SI1
SO1
SCK1
SLD_MON
FFCLR
AOUT_SEL
CHGI_CTL1
YUZU_SLEEP
SLBUSY
CHGI_CTL2
XTEST
XRF_RST
VREC_SEL
XHOLD_SW
XCS_REG_DRV
XMUTE/MUTE
RECP
CHGI_CTL3
USB_HOLD
XRST2_DET
USB_HOLD
T_MARK_SW
SUSPEND
CHGI_SEL
SUSPEND
RECP_MON
XMIC_DET
SPDL_MON
XCS_PWR_IC
TXD
XPD_ADC
XMIC_DET
RXD
XCS_ADC
XCS_ADC
XPD_ADC
TFDR
TR1
TRDR
SPRD
ADIP
ADFG
SFDR
RTCK
DCLSOUTL
DCLSOUTR
C833 1
VREFR
D_VCONT_PWM
CHG_PWM
AOUTR
AOUTR
HIMD_PROTECT
CHG_OPR_LED
CHG_MON
AOUTL
AOUTL
LDPEN
GND_SW
C832 1
XCS_REC_DRV
GND_SW
VREFL
CHG_TYPE2
VBUS_MON
DRAM_HOLD_DET
MINUS_MON
DRAM_VDD_CLR
VIN
VBUS_MON
MINUS_MON
DRAM_HOLD_DET
VIN
DRAM_VDD_CLR
AD3EXTC
R839
0
CHG_I_CTL2
CHG_I_CTL2
AD2ENDF
ADC3VREFH
TEST
APCREF_DA
SRAM_MODE
DACVREFH
CHG_I_CTL3
(Page 28)
CHG_I_CTL3
APCREF_DA
REG_DACVREFM
HIDC_MON
HIDC_MON
CHG_TYPE2
R823
10k
CHG_TYPE2
PLL3EXTCO
HSALF
TIGER_MON0
PLL3EXTCI
TIGER_MON1
PLL2EXTCO
TIGER_MON2
PLL2EXTCI
TIGER_MON3
XRST
TIGER_MON4
HALF_LOCK_SW/OPEN_SW
C814
0.1
C817
0.1
R840
0
C843
0.1
XRST_MTR_DRV
XRST_MTR_DRV
SLD_CON_W
R810
0
SLD_CON_W
SLD_CON_V
SLD_CON_V
C812
1
C830
1000p
SLD_CON_U
XRST
C810 0.1
SLD_CON_U
HALF_LOCK
SLD_PWM
RADIO_ON
SLD_PWM
TIGER_MON5
RADIO_ON
TIGER_MON6
REC_KEY/DOWNLOAD
TIGER_MON7
RST_CONT
TIGER_MON8
RMC_KEY
TIGER_MON9
BATT_MINUS_MON
SLD_MON_U
R865 470k
SLD_MON_U
SLD_MON_V
REC_KEY
RST_CONT
SL802
SLD_MON_V
SLD_MON_W
RMC_KEY
SLD_MON_W
TF1
XLDON
TR1
R832 10k
R860
10
TF1
MINUS_MON
VBUS_MON
TR1
VBUS_MON
XLSRCK
ZI2
WK_DET
ZI2
TAT
WK_DET
TAN
HIDC_MON
ZI1
D803 MA2SD32008S0
ZI1
HIDC_MON
FR1
REG5_VSTB
FR1
(Page 25)
NAR
DCIN_DET
IDO
SET_KEY_2
SAK
SET_KEY_1
FF1
SET_KEY_2
R866 0
FF1
CLV_CON_W
SET_KEY_1
CLV_CON_W
CLV_CON_V
VREF
R833 0
CLV_CON_V
LRCKI
VREF_MON
XBCKI
CHG_MON
CLV_CON_U
CHG_MON
CLV_CON_U
CLV_PWM
R837 2.2k
C827 0.1
VB_MON
DATAI
CLV_MON_U
SYSTEM CONTROLLER,DIGITAL SIGNAL PROCESSOR
SI3
R825 0
SO3
CLV_MON_W
REG5_VSTB
C803
0.01
ADC1EXTC
*
CLV_MON_W
SCK3
APC
CSP(Chip Size Package)
SI4
R858
47k
D_VREGO
IC801
CXD2681-223GG
CLV_MON_V
CLV_MON_V
C828
1000p
CLV_PWM
CLV_MON_U
R857
470k
DCHG
S0
S0
SO4
ADRT
SCK4
AUX1
R869 0
S1
S1
XLDON
TE
XLDON
SCS3
TE
SCS4
SE
PLSE_XDC
S_MON
PLSE_XDC
LC_DRV1
ZI2
LC_DRV2
ZI1
LC_DRV1
LC_DRV2
PEAK
HI_Z_SLD
ADRB
HI_Z_SPDL
ADIO
SET_CODE0
VC
SET_CODE1
FE
(NHF800)
VC
PEAK
BOTM
FE
R829
0
BOTM
OFTRK
ABCD
R830
0
OFTRK
TE
ABCD
SET_CODE2
BOTM
TE
SET_CODE3
BOTM
D_EN1
PEAK
D_EN2
CLTV
FE
PEAK
FE
ABCD
C809 0.1
ABCD
VREF
VREF
D_ENVG
FILO
DADT
FILI
XRST_RF
XRST_RF
SSB_DATA
(Page 27)
SSB_CLK
LC_DRV2
RFI
RFI
PWM_L2
SSB_CLK
C808
1
R815
220k
PCO
PWM_L1
R822
1M
R818 R819
2.2k
1k
LC_DRV1
SSB_DATA
R821 2.2M
R820
220
R817 1k
ADIP
C805 0.47
ADIP
ASYI
I2C_1
S_MON
C804 0.01
S_MON
REG5_REG
APCREF_DA
I2C_2
ASYO
JTAG0
EBIFVSS7
JTAG1
EBIFVDD7
CLKIN2
EBIFVSS6
FS256
EBIFVDD6
ADDT
EBIFVSS5
LRCK
EBIFVDD5
XBCK
EBIFVSS4
R855 0
APCREF_DA
VC
C857
22p
R856 0
VC
R811 R812
10k 100k
RFI
RFI
R864 220
FB810
R863 0
FB809
REGO3
EBIFVDD0
R808
4.7k
UOSCI
FB801
0
FVSS0
C835
0.1
C811
0.1
C816
47
6.3V
R862
1M
Q802
XP152A12C0MR
EBIFVDD2
EBIFVSS1
DRAMVSS0
DRAMVSS1
DRAMVDD2
DRAMVDD4
DRAMVDD3
DRAMVDD1
DRAMVDD0
IFVSS_2
IFVSS_1
IFVDD_4
IFVDD_3
IFVDD_2
IFVDD_1
VSS_2
VSS_1
MSJTAGVDD
VSS_0
USBIFVDD
MAIFVDD
TSMVDD
USBOSCVDD
OSCVDD
DAVSS
DAVDD
DVDD25LPF
AVSS6
AVDD6
AVSS5
AVDD5
AVSS4C
AVDD4B
AVSS4B
EBIFVSS0
+2.5V REGULATOR
IC804
XC61CC2502NR
VOUT
VSS
VIN
NC
C846
0.1
C845
47
6.3V
CL8027
L802
22µH
C853
0.1
C822
0.1
C864
0.1
C818
10
6.3V
R824 0
REG5_VSTB
L803
10
R841
10
REG5_OSC
C859
0.1
AVDD4C
C839
0.1
REG_F
(Page 33)
EBIFVSS2
L804
10
CL8055
D801
MA2Z748001S0
REG5_REG
L801 10µH
MZ-NH700/NHF800
32
32
C820
0.1
C823
0.1
C819
47
6.3V
C821
0.1
C850
0.1
R845
0
VB
3.3V
AVSS4A
AVDD1C
AVDD2
AVSS1B
AVDD1B
AVSS1A
AVDD1A
DVSS1_11
DVDD1_11
DVSS1_10
VSS_3
DVDD3
DVDD1_10
DVDD1_9
DVSS1_8
DVSS1_9
DVDD1_8
DVSS1_7
DVDD1_7
DVSS1_5
DVDD1_6
DVSS1_6
DVDD1_5
DVSS1_4
DVSS1_3
DVDD1_3
DVDD1_4
DVSS1_2
DVDD1_2
CL8001
L805
0
FCRAMVDD
S
EBIFVDD3
REG5_REG
(Page 30)
EBIFVSS3
SRAMVDD1
C856
0.1
X801
48MHz
C838 10 6.3V
BEEP
BEEP
C836 10 6.3V
MUTE
MUTE
R802
0
R826 0
XHP_STBY
DVSS1_1
XHP_STBY
R801 4.7k
AOUTR
AOUTR
R807 2.2k
AOUTL
R806 4.7k
REG4_DVDD
AOUTL
S
EBIFVDD1
SUSPEND
AVDD4A
USBHOLD
AVDD3
R805 22
SUSPEND
AVSS3
UDM
USB_HOLD
AVSS2
UDM
DVDD25SVAD
UDP
R804 22
DVDD1_1
UOSCO
UDP
DVSS1_0
DVDD1_0
DTCK
SRAMVDD0
UPUEN
FS512
SRAMVSS0
OSCO
X802 22.5792MHz
Q801
2SK1830-TE85L
EBIFVDD4
SRAMVSS1
DRAMVSS2
C802
7p
C801
7p
OSCI
FB807
0
R867
1M
0
FCRAMVDD
FB802
FCRAMVSS1
R809 0
XBCK
(Page 28)
Q801,802
B+ SWITCH
0
VIN
FVDD0
LRCK
FCRAMVDD1
ADDT
VIN
FCRAMVSS0
FS256
A_FS256
A_FS256
FCRAMVDD0
MDVCC_CTL
MDVCC_CTL
(Page 33)
MZ-NH700/NHF800
6-12. SCHEMATIC DIAGRAM – MAIN Section (9/9) –
• See page 36 for IC Block Diagrams.
• See page 24 for Waveforms.
(9/9)
D302
MAZS068008SO
+1.2V REGULATOR
R308
0
IC302
XC6219B212MR
CE
SCK0
NC
SDO0
C320
2.2
6.3V
L303
10µH
C328
1
C323
10
6.3V
SCK0
OPT_DET
OPT_DET
C324
0.1
XJACK_DET
XJACK_DET
DIN1
ADDT
C202
2.2
R201
47k
C102
2.2
R101
47k
C303
0.1
R301
1k
XOPT_CTL
C319
0.1
C321 47 6.3V
R314
0
VSS
C322 0.1
VIN
SDO0
Q301
2SA2018TL
B+ SWITCH
R304
100k
VOUT
C327
1
R306
10k
D301
MAZS068008SO
D303
MAZS068008SO
DIN1
R305 100
XJACK_DET
FB303
J301
DIN1
LINE IN
XOPT_CTL
FB301
(OPT)
XOPT_CTL
FB101
XCS_ADC
LRCK
XPD_ADC
SDO0
R309 1k
XMIC_DET
SCK0
R310 1k
BCLK
XCS_ADC
XPD_ADC
C310
10
6.3V
LIN
MCLK
MPWR
LRCK
MRF
CDTI
C201
100p
C101
100p
OPT_DET
R207
22k
R107
22k
R106
10k
C305
100p
C304
100p
C302
2200p
D304
MAZS068008SO
PREOR
MVDD
PRENR
PRER
MICL
PDN
PREOL
XPD_ADC
PRENL
CSN
R206
10k
C311 0.1
MVSS
IC301
AK5356VN-L
R103
22k
C312
47 6.3V
MVCM
CCLK
XCS_ADC
GND
R203
22k
FB302
C318
2.2
6.3V
A/D CONVERTER
XMIC_DET
PREL
(Page 32)
FB201
RIN
FS256
VCOM
XBCK
XBCK
XBCK
AVSS
LRCK
LRCK
AVDD
FS256
DVSS
R315
0
SDTO
FS256
DVDD
ADDT
ADDT
C313
47
6.3V
MICR
R307
100
XMIC_DET
J302
C314 0.1
R205 0
MIC
C315 10 6.3V
(PLUG IN POWER)
R105 0
C316 22 6.3V
C208
4.7
6.3V
R312
10
L1
C325
0.1
(Page 29)
C205
0.1
C105
0.1
C206
1000p
C106
1000p
C108
4.7
6.3V
L2
C308
0.1
C107
47
4V
M1
C204
2200p
C306
0.1
C104
2200p
C207
47
4V
M2
FCRAMVDD
R892
220k
FFCLR
-1
(Page 28)
-2
Q885,886
IC882
R1180Q221B
CE
+2.2V REGULATOR
R891
0
VOUT
D881
MA2SD32008S0
(Page 32)
Q885
SI1410EDH-T1
S
GND
L881
100µH
VDD
R884
470k
R872
10k
Q886
XP4314-TX
B+ SWITCH
C891
0.1
D885
MA2Z748001S0
D884
MA2Z748001S0
R881
220k
DC/DC
R883
1M
P3
CONVERTER
P4
D882
MA2SD32008S0
VB
IC881
XC6382C251MR
VSS
NC
-1
VOUT
LX
C883
10
6.3V
CE
-2
R882
470k
Q881
XP4601-TXE
C884
10
6.3V
C885
1
R890
220k
R886
100k
C886
0.01
R885
1M
C887
1
Q881,883
C895
0.1
REGULATOR CONTROL
MZ-NH700/NHF800
33
33
-2
Q884
XP4314-TX
VOLTAGE
D883
MA2SD32008S0
Q883
UN9214J-(TX).SO
R887
100k
R873
10k
(Page 32)
R889
47k
-1
DETECT
R893
2.2M
DRAM_HOLD_DET
R888
220k
DRAM_ALONE
DRAM_VDD_CLR
MZ-NH700/NHF800
6-13. PRINTED WIRING BOARD – MAIN Section (1/2) –
: Uses unleaded solder.
• Semiconductor
Location
1
2
7
8
9
10
11
S894
-1
-2
B
CN451
(USB)
CN451
(FRONT VIEW)
A
1
5
C
K
OPTICAL
PICK-UP
BLOCK
(ABX-U)
D457
MAIN BOARD (COMPONENT SIDE)
C710
R709
C702
C706 C707
C705 C708
R711 R710
C305
C201
+ C207
C310 +
+ C318
C919
R156
C108 +
C208 +
C908
+ C160
S893
OPEN/CLOSE
DETECT
R161
R160
+ C260
J352
i
R260
R351
C353
(AEP, UK, EE) R261
L9001
C649
8
C903
L805
C902
5
A
R680
C923
C650
A
D605
C646
K
A
K
A
D608
C426
C419
A
1D
2G
2S
Q602
D436
R491
R162
R490
K D151 A
R489
D473 A
K
1
R486 3
C480
5
4
R476
R477
1-861-364-
K
C676
1S
1G
2D
R620
4
+ C403
2G
Q601
D606
34
S
1
+ C402
2D
K
R623
C648 R621
A
1G
R625 R624
D615
MZ-NH700/NHF800
R420
Q603
IC471
D607 A
C481
K
C416
D616 A
K
K
+
C819
C901
BCE
LF401
L606
R858
R857
D439
K
R668
THP401
R418
C420
K
C922
C915
R419
S D D
R866
R825
C810
R879
+ C107
Q616
A
R659
C906
R903
K
R912
Q407
34
FB302
C709
C717
L607
C715
1D
(NHF800)
C311
R660 R662
R661 R663
C909
D902
K
R906
A
R910
R908
R833 C827 R837
+ C320
(AEP, UK, EE)
R712
16
A D304
Q617
D614
A
R917
K
C828
4
R829
C861
BCE
R880
R876
Q803
1
R865
R897
R894
R842
C850
D906
L802
R895
L903
5
IC892
C892
R855
8
D904
C958
C954 R918
C928
C960
C823 C811
FB803
R813
R878
FB802
R809
R863
R830
FB809
R864
R856
15
C927 C926
R839
Q902
C838
C864
R954 R920
2C
1B
1E
R958
R840
R955
C835
+
C836
FB810
C812
C833
C832
C821
+
L803
16
1
+
L804
R707
K
G D D
C918
R931 60
R914
C839
Q433
A
C312 +
1E 1B 2C
R924
2E
2B
R960 1C
17
C916
1C 2B 2E
R964
IC901
C932
R959
C701
IC701
+
R819
C817
R826 R824
C816
+
R818
C
D301 K
R421
R256
L501
FB502
A
R926 R927
R929 R930
C959
30
46
R925
R936
R934
C920
R884
C929
C820
+
R821
C843
C716
R706
R622
R890
C933
C939
C883
R922
C814
R822
C808
K
31
C931
L801
C818
I
45
DVCC
2C
1B Q406
1E
+ C352
+
C940
+
R841 C846
C845
H
R937
R935
+
G
A
R938
R933
R952
L881
Q883
+ C924
D905
C937
C948
C935
D881
L904
2E
2B
1C
R424
32
J301
LINE IN
(OPT)
R423 R422
R907
1C
2B Q881
2E
R886
A
IC882
C885
C936
K
4
+
3
5
1E
R882 1B
1
2C
BCE
R951 R953 C895 R873
F
3
D
Q432
R904
R883 R881
4
C884
C886
D
DIN
DGND
D
D
S
33
1
+
R885
S
64
+
1
1S 1G 2D
C568 R507
+
2
C712
C713
Q501
R521
26
R503
R887
R508 C569
1D 2G 2S
R522
IC881
Q451
C452
49
R504
C573
C887
R462
B
Q403
D
D
G
R437 R438
A
FB503
C570
K D883
A
E
C714
48
+
E
CN501
D
D458
L507
K D882
D
C703 R708
C558
C562
R463
C561
G
C453
R713
Q502
K
1
R513 R514 C560
1
D440
A
C101
R432
C303
R433
L351
4
Q452
1E 1B 2C
BCE
L505
C564
D
2
K
D884
ECB
R561
R516
R892
Q886
R893
3
BCE
D885
R888
1C 2B 2E
IC502 R467
Q503
R464 R466
K
R515
A
C891
Q885
7
1C
2B
2E
R872
G
D
D
R889
A
K
S
D
D
1C 2B 2E 1E
1B
Q884 2C
1E 1B 2C
6
+
R891
+
D-8
D-8
I-5
D-7
E-8
D-7
D-5
E-5
D-4
D-4
I-6
I-6
I-6
H-5
G-5
I-3
F-3
F-2
D-2
D-2
D-2
H-3
6
S894-2
Hi-MD
PROTECT
DETECT
A
Q403
Q406
Q407
Q432
Q433
Q451
Q452
Q501
Q502
Q503
Q601
Q602
Q603
Q616
Q617
Q803
Q881
Q883
Q884
Q885
Q886
Q902
5
S894-1
PROTECT
DETECT
+
I-9
D-5
E-6
F-2
F-1
I-4
G-4
4
+
IC471
IC502
IC701
IC881
IC882
IC892
IC901
3
A
+
Ref. No. Location
D151
I-9
D301
D-9
D304
D-9
D436
I-9
D439
H-8
D440
D-7
D457
C-9
D458
D-5
D473
I-9
D605
I-6
D606
I-6
D607
I-6
D608
I-6
D614
H-5
D615
I-5
D616
I-6
D881
F-1
D882
E-1
D883
E-1
D884
D-2
D885
D-1
D902
G-5
D904
H-4
D905
F-4
D906
H-4
11
(11)
MZ-NH700/NHF800
6-14. PRINTED WIRING BOARD – MAIN Section (2/2) –
2
3
4
• Semiconductor
Location
5
6
MAIN BOARD (CONDUCTOR SIDE)
7
A
U
M701
(SPINDLE)
FB452
C455
C539
C537
C550
C555
C547
C552
C545
(CHASSIS)
R520
R524
ECB
C860
C565
A
C574
C526
C536
C538
R502
R518
R501
R517
D441 K
R509
R525
C528
C523
R526
C513
C529
C525
C427
Q504
R511
C669
R823
C847
R843
R868
VDR801
CL919
CL921
4
R827
R810
+ C567
FB501
C635 +
K
∗
IC501
L504
C556 +
L506
C566
A
R635
C533
CL431
(BATT+)
C438
1
4
IC604 2
3
C668
L901
R861
R812
C857 R817
R820 C809
R673
R869
R815
L906
C633
D602
C804
C805
R811
A
C803
D
R802
R805
Q802
X802
4
FB807
A
3
R845
IC804
K
C801
D801
A
R832
R867 C856
2
1
C853
CL8055
S
GDS
C858
D803
K
C622 +
G
C830
L601
R806
R801
+ C627
CL604
∗
IC801
C802
FB801
C628
CL8027
R646 X801
R808
C961
IC902
C822
1
R807
2
4
R804
3
C859
11
1-861-364-
(11)
CL8001
SL801
Q801
(CHASSIS)
DC IN 3V
−
C531
C559 R512
5
J402
LCD
MODULE
R505
SL802
S
C408
∗
K
D401
C527
R519
L502
C661
K
R642
GDS
Q614
R657
C660
R650
L603
8
CL935
C530
A
R648
C637 +
C634
R629
C642
C645
C638 R671
G
R436
A
C557
R860
4
R447
C
C611
Q609
1
IC401
CN471
C511 C521
C515 C522
CL931
R862
IC605
R612
4
16
CL433
(GND)
J
R649
C643
5
3
Q401
(CHASSIS)
R444 R441
+ C423
B
IC402 C516
W403
C554
5451 48 45 43 42 40 37 34 31
5552 49 47 44 41 38 36 33 30
5653 50 46
39 35 32 29
1 4 7 11
18 22 25 28
2 5 8 10 13 16 19 21 24 27
3 6 9 12 14 15 17 20 23 26
D D603
+ C411
IC607
1
5
C407
3
8
R605
R435
4
R684 2
C671 R647
C607
C517
Q612
R670
C620
+ C616
C421 R679
1C
2B
2E
C412
I
C652 +
R681
C406
1
S D D
SL901
C675 R645
R653
Q618
1E
1B
2C
IC606 R682 1
E
84 87 89 91 94 98 102 106 109 111 3 2
85 86 88 90 93 97 101 105 108 110 112 1
R425
R434
4
+ C653
R628
R665
R678
R608
C604
+ C614
1
3
C625
D601
3
C673
2
K
C602
1
Q615
1
C415
K
D610
+ C612
C630
C609
Q471
R636
R456 R455
C636
A
∗
IC601
A
C666
R616
57 56 54 52 49 45 41 37 34 32 30 29
58 59 55 53 50 46 42 38 35 33 31 28
60 61
27 26
62 63
64 51 47 43 39 36
25 24
65 66
67 68 48 44 40 23
22 21
69 70
71 72
20 19
18 17
73 74
75 76
16 15
14 13
77 78
79 96 100 104 12 11
10 9
80 81
92 95 99 103 107 8
7 6
82 83
5 4
R446
D471
R474 C476
R475
K
R473
FB471
A
R472
R471
C361
2C
K
R654
1B
E
2B
R478 C478
D609
A
4
G D D
R638 R639
Q613
5
3
Q901
C644
R683
1C
C363
R485
A
R480
FB357
D251 K
C429
R359
H
4
IC602
C601
FB353
FB2
+ C321
5
R255
2C
1B
1E
R675
C672
L608
R685
6
C254
2E
2B
1C
D611
1
+ C553
C524
C520
R442 C434
L907
C641
C677
C154
R155
BP701
R664
7
1
R262
FB354
K
+ C621
C153
C253
24
4
D604 A
12
IC352
R157
R158
C252
R257
R355
FB1
C251
D613 A
C355
19
R483
K
K
A
K
C364
K
C152
FB355
D352
R258
G
13
3
L605
C658 +
R652
R152
R252
18
R251 R151
C151
K
R352
C351
C479
R154 R254
F1
C354 +
5
S D D
R677
R643
S D D
R354
2E 2B 1C
R353
BCE
R153 R253
Q353
F351
1
Q611
28
+ C356
22
Q352
R356
C319 C322
1
Q351
C308
R601
C619
C205
21
R443
IC603
1
CL658
IC301
G D D
2C 1B 1E
SL894
C204
L303
C324
8
R484
R205
R307
R358
F
MIC
(PLUG IN POWER)
C104
R206
R207
C105
ECB
1E 1B 2C
10
G D D
7
C106
R107
C206
R106
R105
Q607
Q608
C323 +
14
L702
CN701
R618
1C 2B 2E
R609 R619
R314
15
J302
K
C328
L701
R640 R641
+ C315
5
R309
R101
R310
R203 R201
C202
C306
4
L503
+ C518
C519
R315
R312
R308
C325
FB101
1
C102
R103
FB201
3
+ C316
C314
E
IC302
+ C313
FB301
D
C425
A
D303
W404
V
N
C430
Q301
D435
CL432
(BATT–)
A
C302
ECB
+ C613
K
C327
R301
R304 R306
D302 A
R305
FB303
(CHASSIS)
W
10
+ C424
LF451
K
C458
C304 C459
C460
R617
C456
C
U
K
C461
SL892
FB451
Ref. No. Location
D251
H-3
D302
D-2
D303
D-3
D352
G-2
D401
I-5
D435
D-4
D441
D-10
D471
H-3
D601
G-5
D602
G-6
D603
F-7
D604
F-5
D609
F-5
D610
F-4
D611
E-8
D613
G-4
D801
I-7
D803
I-8
M703
OVER WRITE
HEAD UP/DOWN
M
CL460
(VBUS GND)
CL453
(VBUS 5V)
11
V
DRY BATTERY
SIZE "AA"
(IEC DESIGNATION R6)
1PC. 1.5V
SL891
R454
10
M702
(SLED)
W
B
9
N
C457
S892
(HALF LOCK)
8
1
C674
1
: Uses unleaded solder.
+
HR601
OVER WRITE
HEAD
MZ-NH700/NHF800
35
35
IC301
IC302
IC352
IC401
IC402
IC501
IC601
IC602
IC603
IC604
IC605
IC606
IC607
IC801
IC804
IC902
F-3
D-4
G-3
I-5
D-8
D-9
G-6
H-4
D-7
F-11
H-5
H-4
H-4
H-9
I-7
H-7
Q301
Q351
Q352
Q353
Q401
Q471
Q504
Q607
Q608
Q609
Q611
Q612
Q613
Q614
Q615
Q618
Q801
Q802
Q901
D-3
F-4
F-2
F-2
I-4
H-3
E-10
E-4
E-4
H-6
E-5
G-7
E-7
E-7
E-8
H-4
I-7
H-7
F-8
MZ-NH700/NHF800
• IC Block Diagrams
BST SW
BEEP IN
GND
VREF IN
MICL
C352 TA2131FLG (EL)
18
17
16
15
14
13
15
PW
SW
MT
SW
BST
SW
BEEP
21
20 19
18 17
16
MT SW
PW SW
PREOL
PREL
PRENL
PRENR
PRER
PREOR
IC301 AK5356VN-L
12 VREF
V REF
11 LPF1
MICR 22
MT TC 19
14 PDN
RESET
VCC1 20
MVDD 23
ADD
INB 21
13 CSN
12 CCLK
11 CDTI
CONTROL
REGISTER
INTERFACE
MVSS 24
MVCM 25
VCOM
MRF 26
MPWR 27
MIC POWER
SUPPLY
10 BST NF1
BST1
INA 22
10 LRCK
9 MCLK
8 BCLK
9 LPF2
PW
A
BEEP
23
OUTB
PW
B
BST2
7 BST OUT
BEEP
24
OUTA
BST
AGC
4
5
6
AGC IN
3
DET
2
OUTA
1
OUTB
AUDIO
INTERFACE
CONTROLLER
VCC2
A/D
CONVERTER
PWR
GND
LIN 28
8 BST NF2
4
VCOM
AVDD
AVSS
5
6
7
SDTO
3
DVDD
2
DVSS
1
RIN
VCOM
XRESET
VGIN
SBUS
SCK
CPOUT
CP
DVCC
42 41
40
39
38
37
36
35
34
33 32
31 30 29
TE
DGND
IC501 SN761059ZQLR
CIG
20 19 18 17
VC
I_CTL1
21
ADIP-IN
GND
22
ABCD
A/D
23
FE
I_CTL3
24
PGND
RS
I_SEL
AD_SEL
IC401 MM1655NCBE
A/D
CONVERTER
BAT– 25
RF1 26
SERIAL
INTERFACE
16 TYPE2
IAMP_CAL 27
15 CFB
AMP_SEL 28
14 IAMP_CTL
+ –
+ –
+ –
TEMP
13 A7CAL_SW
A+B+C+D
I+J
NPP
TON
CSL
AW+DW
TON PEAK
TON BOTM
ADIP
TE
TWPP
PK/BTM
AW
CSLO
VREF
NPPO 43
VREF
I_CTL2 29
AVCC2 44
CHG_SW1 30
VCC2
OFTRK
OFTRK 45
BAT+ 31
12 IN1–
VO 32
11 TYPE1
ADIP
10 WDT
BOTM 47
PEAK 48
DET
COMPARATOR
BLOCK
CHARGE CONTROL
ON/OFF
49
50
51
52
AVCC 53
5
6
7
VG
PWT
VI_CTL
CHG_SW2
VI
CHG_CTL
PWR_WAKE
FE
17 PDO-SOURCE
16 PDO-SINK
RF
15 A-C
36
36
1
2 3
4
5 6
7
8
9
10 11 12 13
14
D-C
4
8
APC
JX 54
JY 55
LY 56
RF_LX
RF_LY
RF_JY
RF_JX
3
WAKE-UP
CONTROL
VCC
RFO
2
LED_CTL
20 PD-BUF
19 PD-NI
18 PD-I
VREF09
1
VI2
MZ-NH700/NHF800
CHARGE SWITCH
CONTROL
9
21 SMON
ABCD
VREF10
VREF
ERROR LED
CONTROL
25 CCSL2
24 CDN
22 WPP-LPF
TPP/WPP
TE
AGND
–
+
VREF09
A-C
D-C
MALFA
MIJ
AWBPF
DW
DWBPF
OFTTH
APC
ADIP-BPF
VFREF0.4
I-J
23 ADFG
OFC-C1
OFC-C2
CHARGE
CONTROL
ON/OFF
D
A
B
C
PEAK/
BOTTOM
PS
EQ
OSC
SWITCHING
CONTROL
RECEIVER
T-ON
TON-C 46
S-MONITOR
LX
TIME
DIVIDER
SWITCHING
CIRCUIT
28 CN
27 CPGND
26 CLK
POWER
SUPPLY
VCC2
VCC
MZ-NH700/NHF800
OUTA
VG
OUTB
VRECIN
VRECIN
PGND2
HA
HB
PGND4
CL
VCP
VG2
GND
CH
HAB
HBB
GND
RECP
VG3
PGND4
VBUSSEL2
EFM CLK
EFM
VIF
CLK
DATA
SCK
NC M12
IC601 SC901585VAR2
84
83
82 81 80
79
78 77
76
75 74 73 72 71
70 69
68
67
66 65
64
63 62
61
60
59 58
57
CHARGE PUMP
VG
VG3
VIF
NC A12 85
56 LATCH
EFM BOTTOM
PRE DRIVER
HOLD OUT 86
RST OUT 87
BUFFER
LVDT
55 XWKO
WAKE
CONTROL
HOLD
LOGIC
VBUS
EFM TOP
PRE DRIVER
PVBUS
53 WAKEC
PVBUS 88
VBUS
CRST 89
52 V33UO
51 VBUS DET
LVDT
DVDD IN 90
DVDD OUT 91
54 VBUS
DAC
SYSTEM
BANDGAP
REFERENCE
50 VBUSREF
HOLDC 92
49 L5 2
OSC OUT 93
48 PGND5
47 PGND5
2.0V
RESET
SLEEP IN 94
CONTROL
46 POWFB
RST IN 95
45 L5 1
PGND2 96
RESET
LOGIC
REG IN 97
REG OUT 98
H-BRIDGE
DRIVER
44 PGND5
43 VBUSSEL
SUS IN 99
42 CLM
PGND2 100
41 POWP2
TSBV IN 101
TSBV OUT 102
40 INP3
39 INP2
POWER SWITCH
DRIVER
CIRCUIT
V33R 103
38 CLP
PGND1 104
37 POWP1
BUS POWER
STEP DOWN CONVERTER
DRIVER
VSTB IN 105
VSTB OUT 106
BATSEL 107
VPDRV
36 VPDRV
SELFPOWER
STEP UP-DOWN CONVERTER
DRIVER
V33RO 108
35 RF2
34 DTC2
RF1 109
33 INM2
INM1 110
32 INM3
DTC1 111
PWM
DAC
31 DTC3
PWM
VREC
VREF
BUFFER
VREC STEP UP-DOWN
CONVERTER DRIVER
VREC 112
30 RF3
V3 STEP UP-DOWN
CONVERTER DRIVER
29 NC M1
VC
9 10
11 12 13 14 15 16
17
18
19 20
21 22
23
24 25 26 27
28
GND
PGND1
VC
VC
PGND3
PGND1
UP 3B
VREF IN
PGND3
PGND3
V3C 1
V3C 2
33USEL
L3 1
L3 2
DW 3T
DW 3B
V3FB
DW 1B
DW 1T
VRECO 2
VRECO 1
L1 2
L1 1
8
INP1
2 3 4 5 6 7
UP 1T
UP 1B
1
NC_A1
V3FB
37
MZ-NH700/NHF800
IC602 R1160N121B-TR-FA
REGULATOR
VDD 1
GND 2
5
VOUT
4
ECO
CURRENT
LIMIT
CE 3
VI1
UI1
PWM1
CPUO1
CPVO1
CPWO1
VG
VCC
GND
STALL
CPWO2
CPVO2
CPUO2
PWM2
UI2
VI2
IC701 BD6607KN
64
63
62 61
60
59 58 57 56 55
54
53
52 51
50
49
48 WI2
WI1 1
VG
DECODER
STANDBY
DECODER
VG
VG
PRE DRIVE
PRE DRIVE
PGNDW1 2
47 PGNDW2
WO1 3
46 WO2
ST1 4
45 ST2
VMVW1 5
44 VMVW2
43 VO2
42 VO2
VO1 6
VO1 7
PGNDUV1 8
41 PGNDUV2
40 UO2
39 UO2
UO1 9
UO1 10
VMU1 11
38 VMU2
VG
VG
VMR1 12
RO1 13
RO1 14
37 VMR2
36 RO2
35 RO2
PRE
DRIVE
PRE
DRIVE
PGND1 15
34 PGND2
FO1 16
27 28
CPWI2
CPVI2
CPUI2
IC881 XC6382C251MR
CE 1
CHIP
ENABLE
VDD
VLX LIMITER
REFERENCE
VOLTAGE
BUFFER
+
–
PFM CONTROL
OSC 100kHz
5 LX
VOUT 2
NC 3
38
4 VSS
29 30
31 32
VMF2
FO2
26
FI2
+
–
25
RI2
+
–
24
COM2
+
–
23
CPWI1
CPVI1
CPUI1
21 22
COM1
FI1
+
–
RI1
+
–
19 20
+
–
17 18
FO1
VMF1
33 FO2
MZ-NH700/NHF800
IC892 HN58X2564FPIEZ
HIGH VOLTAGE
GENERATOR
8 VCC
Y DECODER
MEMORY
ARRAY
Y SELECT &
SENSE AMP
VSS 4
ADDRESS GENERATOR
X DECODER
XCS 1
SDO 2
XWP 3
7 XHOLD
CONTROL
LOGIC
6 SCL
SERIAL-PARALLEL
CONVERTER
5 SDI
REGI3
REGO3
REGC3
MUTEON
DW 2B
DW 2T
VC2
VCIN
VCO2
VO2
L2
L2
PGND2
PGND2
XRST2
CRST2
IC901 SC901584EPR2
48
47
46
45
44 43
42
41
40
39
38 37 36 35
34
33
RESET 2
SERIAL
PASS
REGULATOR 3
POWER
SWITCH 2
REGC2 49
REG2G 50
REGO2 51
REGI2 52
RST2
VC2
STEP
UP-DOWN
DRIVER
RST2
VC2
MUTING
BUFFER
SERIAL
PASS
REGULATOR 2
REF2
VREF
PWM
32 DTC2
REGC1 53
VREF
RST1
31 RF2
MUTE ON
REGI1 55
REF2
SEQSEL
REGO1 54
SERIAL
PASS
REGULATOR 1
RST2
30 INM2
29 VGSEL1
28 VGSEL2
VB
27 VB
VG SELECT, VG DUTY
VREF0
GND 56
26 PGND3
VC
BANDGAP
REFERENCE
VREF 57
25 LG
24 VG
STEP UP
DC/DC CONVERTER
START UP
CLK
23 C1L
REF1
REF2
REF3
REF4
REF5
REF1
22 INM1
VC
VREF0
21 RF1
VREF
REF DAC
20 DTC1
RST1
RST1
LVB
DRIVER
PWM
CONTROL
VC
VREF
RST2
1 2 3 4 5
6
7
8
9
10
11
12
13 14 15 16
VTSB
VC1
VCO1
VO1
L1
L1
PGND1
PGND1
POWER
SWITCH 1
VREF
HVB
VC
STEP
UP-DOWN
DRIVER
LVB
FFCLR
19 XRST1ADJ
18 CRST1
REF1
VC
VRMC
58
59
60
61
62
63
64
FFCLR
XWK4
XWK3
XWK2
XWK1
DATA
STRB
CLK
WDT
SEQSEL
CLK
SLEEP
RESET 1
17 XRST1
39
MZ-NH700/NHF800
Ver 1.1
• IC Pin Function Description
IC801 CXD2681-223GG (SYSTEM CONTROLLER, DIGITAL SIGNAL PROCESSOR)
Pin No.
Pin Name
I/O
1
DVDD1_0
—
Power supply terminal
2
DVSS1_0
—
Ground terminal
3
DVDD1_1
—
Power supply terminal
4
DVSS1_1
—
Ground terminal
5
DVDD1_2
—
Power supply terminal
6
DVSS1_2
—
Ground terminal
7
DVDD1_3
—
Power supply terminal
8
DVSS1_3
—
Ground terminal
9
DVDD1_4
—
Power supply terminal
10
DVSS1_4
—
Ground terminal
11
DVDD1_5
—
Power supply terminal
40
Description
12
DVSS1_5
—
Ground terminal
13
DVDD1_6
—
Power supply terminal
14
DVSS1_6
—
Ground terminal
15
DVDD1_7
—
Power supply terminal
16
DVSS1_7
—
Ground terminal
17
DVDD1_8
—
Power supply terminal
18
DVSS1_8
—
Ground terminal
19
DVDD1_9
—
Power supply terminal
20
DVSS1_9
—
Ground terminal
21
DVDD3
—
Power supply terminal
22
VSS_3
—
Ground terminal
23
DVDD1_10
—
Power supply terminal
24
DVSS1_10
—
Ground terminal
25
DVDD1_11
—
Power supply terminal
26
DVSS1_11
—
Ground terminal
27
AVDD1A
—
Power supply terminal (for PLL)
28
AVSS1A
—
Ground terminal (for PLL)
29
AVDD1B
—
Power supply terminal
30
AVSS1B
—
Ground terminal
31
AVDD1C
—
Power supply terminal
32
AVDD2
—
Power supply terminal (for A/D converter)
33
DVDD25SVADC
—
Power supply terminal (for A/D converter)
34
AVSS2
—
Ground terminal (for A/D converter)
35
AVDD3
—
Power supply terminal (for A/D converter)
36
AVSS3
—
Ground terminal (for A/D converter)
37
AVDD4A
—
Power supply terminal (for PLL)
38
AVSS4A
—
Ground terminal (for PLL)
39
AVDD4B
—
Power supply terminal (for PLL)
40
AVSS4B
—
Ground terminal (for PLL)
41
AVDD4C
—
Power supply terminal (for D/A converter)
42
AVSS4C
—
Ground terminal (for D/A converter)
43
AVDD5
—
Power supply terminal (for PLL)
44
AVSS5
—
Ground terminal (for PLL)
45
AVDD6
—
Power supply terminal (for A/D converter)
46
AVSS6
—
Ground terminal (for A/D converter)
MZ-NH700/NHF800
Pin No.
Pin Name
I/O
Description
47
DAVDD
—
Power supply terminal (for D/A converter)
48
DVDD25LPF
—
Power supply terminal (for D/A converter)
49
DAVSS
—
Ground terminal (for D/A converter)
50
OSCVDD
—
Power supply terminal (for 22 MHz OSC)
51
USBOSCVDD
—
Power supply terminal (for the USB 48 MHz OSC)
52
TSMVDD
—
Power supply terminal (for the TSB master communication)
53
MAIFVDD
—
Power supply terminal (for MA interface)
54
MSJTAGVDD
—
Power supply terminal (for AUX)
55
USBIFVDD
—
Power supply terminal (for USB interface)
56 to 58
VSS_0 to VSS_2
—
Ground terminal
59 to 62
IFVDD_1 to
IFVDD_4
—
Power supply terminal (for interface)
63
IFVSS_1
—
Ground terminal (for interface)
64
IFVSS_2
—
Ground terminal (for interface)
65 to 69
DRAMVDD0 to
DRAMVDD4
—
Power supply terminal (for D-RAM/DSP interface)
70 to 72
DRAMVSS0 to
DRAMVSS2
—
Ground terminal (for D-RAM/DSP interface)
73
FCRAMVDD0
—
Power supply terminal (for D-RAM)
74
FCRAMVSS0
—
Ground terminal (for D-RAM)
75
FCRAMVDD1
—
Power supply terminal (for D-RAM)
76
FCRAMVSS1
—
Ground terminal (for D-RAM)
77
FVDD0
—
Power supply terminal (for AUX)
78
FVSS0
—
Ground terminal (for AUX)
79
SRAMVDD0
—
Power supply terminal (for AUX)
80
SRAMVSS0
—
Ground terminal (for AUX)
81
SRAMVDD1
—
Power supply terminal (for AUX)
82
SRAMVSS1
—
Ground terminal (for AUX)
83
EBIFVDD0
—
Power supply terminal (for interface circuit)
84
EBIFVSS0
—
Ground terminal (for interface circuit)
85
EBIFVDD1
—
Power supply terminal (for interface circuit)
86
EBIFVSS1
—
Ground terminal (for interface circuit)
87
EBIFVDD2
—
Power supply terminal (for interface circuit)
88
EBIFVSS2
—
Ground terminal (for interface circuit)
89
EBIFVDD3
—
Power supply terminal (for interface circuit)
90
EBIFVSS3
—
Ground terminal (for interface circuit)
91
EBIFVDD4
—
Power supply terminal (for interface circuit)
92
EBIFVSS4
—
Ground terminal (for interface circuit)
93
EBIFVDD5
—
Power supply terminal (for interface circuit)
94
EBIFVSS5
—
Ground terminal (for interface circuit)
95
EBIFVDD6
—
Power supply terminal (for interface circuit)
96
EBIFVSS6
—
Ground terminal (for interface circuit)
97
EBIFVDD7
—
Power supply terminal (for interface circuit)
98
EBIFVSS7
—
Ground terminal (for interface circuit)
99
ASYO
O
Playback EFM duplex signal output
100
ASYI
I
Playback EFM comparator slice level input
101
RFI
I
Playback EFM RF signal input from the RF amplifier
41
MZ-NH700/NHF800
Pin No.
Pin Name
I/O
Description
102
PCO
O
Phase comparison output terminal for the playback EFM system master PLL
103
FILI
I
Filter input terminal for the playback EFM system master PLL
104
FILO
O
Filter output terminal for the playback EFM system master PLL
105
CLTV
I
Internal VCO control voltage input terminal for the playback EFM system master PLL
106
PEAK
I
Peak hold signal input of the light amount signal (RF/ABCD) the RF amplifier
107
BOTM
I
Bottom hold signal input of the light amount signal (RF/ABCD) the RF amplifier
108
ABCD
I
Light amount signal (ABCD) input from the RF amplifier
109
FE
I
Focus error signal input from the RF amplifier
110
VC
I
Middle point voltage input from the RF amplifier
111
ADIO
O
Monitor output terminal of A/D converter input signal
112
ADRB
I
A/D converter the lower limit voltage input terminal
113
SE
I
Sled error signal input from the RF amplifier
114
TE
I
Tracking error signal input from the RF amplifier
115
AUX1
I
Auxiliary A/D input terminal
116
ADRT
I
The upper limit voltage of A/D converter input terminal
117
DCHG
—
Connecting terminal with the analog power supply of low impedance
Not used
Not used
118
APC
I
Error signal input for the laser automatic power control
119
ADC1EXTC
—
Connection terminal for an external capacitor
120
D_VREGO
I
Voltage sensibility of regulator for class-D amplifier
121
VB_MON
I
Unregulated power supply voltage monitoring terminal
122
CHG_MON
I
Charge or discharge current monitoring terminal
123
VREF_MON
I
Reference voltage input terminal
124
SET_KEY_1
I
Front panel key input terminal
125
SET_KEY_2
I
Front panel key input terminal
126
DCIN_DET
I
DC input voltage for battery charge monitoring terminal
127
HIDC_MON
I
High DC voltage monitoring terminal
128
WK_DET
I
Panel key input for wake-up
129
VBUS_MON
I
USB power supply voltage monitoring terminal
130
BATT_MINUS
_MON
I
Voltage monitoring terminal for the minus terminal of rechargeable battery
131
RMC_KEY
I
Remote commander key input terminal
132
RST_CONT
O
System reset signal output to the power control IC
133
REC_KEY
/DOWNLOAD
I
DOWNLOAD key input terminal
134
RADIO_ON
I
Radio on detection input from the remote commander jack
135
HALF_LOCK_
SW /OPEN_SW
I
Front panel open switch detection terminal
136
XRST
I
System reset signal input from the power control IC
137
PLL2EXTCI
I
Connection terminal for an external capacitor
138
PLL2EXTCO
O
Connection terminal for an external capacitor
139
PLL3EXTCI
I
Connection terminal for an external capacitor
140
PLL3EXTCO
O
Connection terminal for an external capacitor
141
DACVREFH
I
Reference voltage input terminal
142
APCREF_DA
O
Reference voltage output terminal
143
ADC3VREFH
I
Reference voltage input terminal
144
ADC3EXTC
—
Connection terminal for an external capacitor
145
VIN
I
RF signal input from the RF amplifier
42
Not used
Not used
Not used
MZ-NH700/NHF800
Pin No.
Pin Name
I/O
Description
146
VREFL
I
Reference voltage terminal connected to the capacitor (for the built-in D/A converter L-CH)
147
AOUTL
O
Built-in D/A converter L-CH signal output
148
AOUTR
O
Built-in D/A converter R-CH signal output
149
VREFR
I
Reference voltage terminal connected to the capacitor (for the built-in D/A converter R-CH)
150
DCLSOUTR
O
PWM modulator signal output for the class-D headphone amplifier
Not used
151
DCLSOUTL
O
PWM modulator signal output for the class-D headphone amplifier
Not used
152
RTCK
—
Not used
153
ADFG
I
ADIP duplex FM signal (22.05±1kHz) input from the RF amplifier
154
TRDR
O
Tracking servo drive PWM signal output (–) to the coil driver
155
TFDR
O
Tracking servo drive PWM signal output (+) to the coil driver
156
FFDR
O
Focus servo drive PWM signal output (+) to the coil driver
157
FRDR
O
Focus servo drive PWM signal output (–) to the coil driver
158
FS4
O
176.4 kHz clock signal output
159
SFDR
O
Sled servo drive PWM signal output to the motor driver
160
SPRD
O
Spindle motor drive control signal output (U) to the motor driver
161
SPFD
O
Spindle servo drive PWM signal output to the motor driver
162
SPDV
O
Spindle motor drive control signal output (V) to the motor driver
163
SPDW
O
Spindle motor drive control signal output (W) to the motor driver
164
SPCU
I
Spindle motor drive comparison signal input (U) from the motor driver
165
SPCV
I
Spindle motor drive comparison signal input (V) from the motor driver
166
SPCW
I
Spindle motor drive comparison signal input (W) from the motor driver
167
SLDV
O
Sled motor drive control signal output (V) to the motor driver
168
SLDW
O
Sled motor drive control signal output (W) to the motor driver
169
SLCU
I
Sled motor drive comparison signal input (U) from the motor driver
170
SLCV
I
Sled motor drive comparison signal input (V) from the motor driver
171
SLCW
I
Sled motor drive comparison signal input (W) from the motor driver
172
SRDR
O
Sled motor drive control signal output (U) to the motor driver
173
DIN
I
Digital audio signal input terminal
174
FS256_OUT
O
11.2896 MHz clock output
175
CHOPPERCLK
O
Clock signal output for chopper
176 to 179 MNT0 to MNT3
O
Monitor output for DSP
180
OFTRK
I/O
Tracking signal input/output for MD3
181
RECP
O
Laser power changeover signal output
182
EFMO
O
EFM encode data output for the record
183
PAUSE_KEY
I
Pause key input terminal
184
PROTECT
I
Recording protector detection input for normal disc
185
OPT_DET
I
Optical digital input plug detection input terminal
186
XJACK_DET
I
Line input plug detection input terminal
187
XMIC_DET
I
Microphone input plug detection input terminal
188
OPEN_CLOSE
_SW
I
Open switch input terminal
189
XCS_ADC
O
Chip select signal output for A/D converter
190
XPD_ADC
O
Power control signal output for A/D converter
191
NC
—
Not used
192
XRST_LCD
O
Reset signal output for the LCD module
193
USB_WAKE
I
System wake up signal input by USB connect
194
A7CAL_SW
O
A7 offset voltage CAL on/off control signal output terminal
“H”: optical in
“L”: plug in
“L”: plug in
Not used
43
MZ-NH700/NHF800
Pin No.
Pin Name
I/O
Description
195
SI0
I
Serial data input from the EEPROM
196
SO0
O
Serial data output to the EEPROM, A/D converter and controllers
197
SCK0
O
Serial clock output to the EEPROM, A/D converter and controllers
198
XGUM_ON
I
Rechargeable battery detection signal input terminal
199
BEEP
O
Beep sound control signal output to the headphone amplifier
200
XOPT_CTL
O
Power supply on/off control signal output for the optical input jack
201
LAM_REQCHK
I
LAM power check terminal
202
LAM_SPREQ
O
LAM force stop request signal output
203
REC_LED
/ACCESS_LED
O
REC or Access LED drive signal output terminal
204
MDVCC_CTL
O
Power supply control signal output for the OP modulation
205
VBUS_VB_CTL
O
USB power supply control signal output terminal
206
LAM_NAME
O
LAM name data request signal output terminal
207
DRAM_ALONE
O
Self-refresh signal output for internal D-RAM
208
PF0
—
Not used
209
PF1/S0DO
O
Connect to the optical pick-up block
210
PF2/S1DO
O
Connect to the optical pick-up block
211
PF3/RTG3
O
Connect to the headphone amplifier
212
XMUTE
/MUTE
O
Muting on/off control signal output terminal
213
SI1
I
Serial data input from the LCD module
214
SO1
O
Serial data output to the LCD module
215
SCK1
I/O
Serial data transfer clock signal input/output terminal with the LCD module
Not used
Not used
Not used
Not used
Not used
216
SLD_MON
I
Sled servo monitoring terminal
217
AOUT_SEL
O
Headphone/line output switching terminal
218
YUZU_SLEEP
O
Chip enable output to the power control IC
219
FFCLR
O
Power on/off control signal output for FCRAM (internal RAM)
220
CHGI_CTL1
O
Charge current limiter control signal output at the time of DC adaptor use
“L”: charge Not used
221
CHGI_CTL2
O
Charge current control signal output terminal
“L”: low current charge
222
CHGI_CTL3
O
Charge current control signal output terminal
“L”: low current charge
223
SLBUSY
I
Receive signal monitoring terminal for sled command
Not used
224
XTEST
I
Terminal for the test mode setting (normally open)
225
XRF_RST
O
Reset signal output to the RF amplifier
226
VREC_SEL
O
VREC start-up timing control signal output terminal
227
XHOLD_SW
I
HOLD switch detection input terminal
228
T_MARK_SW
I
Track mark switch input terminal
229
XRST2_DET
I
Reset signal input from the power control IC
230
CHGI_SEL
O
Charge/discharge control signal output for current sense amplifier
231
RECP_MON
I
Laser power changeover signal monitoring terminal
232
SPDL_MON
I
Spindle servo monitoring terminal
233
XCS_PWR_IC
O
Chip select signal output to the power control IC
234
RXD
I
Not used
235
TXD
O
Not used
236
XCS_LCD
O
Chip select signal output to the LCD module
237
CC_CTL
/VI_CTL
O
Constant current circuit control signal output terminal
44
“L”: test mode
Not used
Not used
MZ-NH700/NHF800
Pin No.
Pin Name
I/O
Description
238
XRST_MTR
_DRV
O
Reset signal output to the motor driver
239
XCS_NV
O
Chip select signal output to the EEPROM
240
CHG_PWM
O
Charge current or voltage control signal output terminal
241
IAMP_CAL
O
Offset signal output of current sense amplifier
242
NC
—
Not used
243
D_VCONT
_PWM
O
For voltage control signal output terminal for class-D amplifier
244
CHG_OPR_LED
O
Charge indication LED drive signal output terminal
245
XCS_REC_DRV
O
Chip select signal output to the over write head driver
246
GND_SW
O
Ground line switching signal output terminal
247
CS_RTC
O
Chip select signal output for real time clock
248
JOG_A
I
Jog dial pulse input terminal
249
JOG_B
I
Jog dial pulse input terminal
250
VBUS_DET
I
USB power supply voltage detection terminal
251
SSB_DATA
I/O
SSB data input/output with the RF amplifier
252
SSB_CLK
O
SSB clock output to the RF amplifier
253
HIMD_
PROTECT
I
Recording protector detection input for Hi-MD disc
254
LDPEN
O
Pulse/DC light-emit switching signal output terminal
255
CHG_TYPE2
O
Battery charge control signal output terminal
256
DRAM_HOLD
_DET
I
Detection terminal for internal D-RAM power supply information keeping
257
DRAM_VDD
_CLR
O
Internal D-RAM power latch clear signal output for quick mode sleep
258
AD2ENDF
I
Monitoring terminal for flag of servo signal A/D measuring finish
259
TEST
—
Not used
260
SRAM_MODE
I
Not used
261
HSALF
I
Not used
262 to
271
TIGER_MON0 to
TIGER_MON9
O
Trigger monitoring terminal
272
XLSRCK
O
Pulse output for laser strobe recording
273
TAT
—
Not used
Not used
Not used
Not used
Not used
“H”: charging
output clock=18.5 MHz
274
TAN
—
Not used
275
NAR
—
Not used
276
IDO
—
Not used
277
SAK
—
Not used
278
LRCKI
I
L/R sampling clock signal input terminal for PCM data interface
279
XBCKI
I
Bit clock signal input terminal for the PCM data interface
280
DATAI
I
Serial clock signal input terminal for the PCM data interface
Not used
Not used
Not used
281
SI3
I
Serial data input for LAM microcomputer communication
Not used
282
SO3
O
Serial data output for LAM microcomputer communication
Not used
283
SCK3
O
Serial data transfer clock signal output for LAM microcomputer communication
284
SI4
I
Data input from ATRAC3 plus encoder communication
Not used
285
SO4
O
Data output for ATRAC3 plus encoder communication
Not used
286
SCK4
O
Clock signal output for ATRAC3 plus encoder communication
287
SCS3
O
Chip select signal output for LAM microcomputer communication
Not used
Not used
Not used
45
MZ-NH700/NHF800
Pin No.
Pin Name
I/O
Description
288
SCS4
O
Chip select signal output for ATRAC3 plus encoder communication
289
HI_Z_SLD
O
Standby signal output terminal for the sled motor
Not used
290
HI_Z_SPDL
O
Standby signal output terminal for the spindle motor
291 to
294
SET_CODE0 to
SET_CODE3
I
Setting terminal for the destination
295
D_EN1
O
Control signal output for class-D amplifier
Not used
296
D_EN2
O
Control signal output for class-D amplifier
Not used
297
D_ENVG
O
Enable/disable switching control terminal for class-D amplifier booster circuit
298
DADT
O
Audio data output terminal
299
PWM_L1
O
LC drive PWM output terminal
300
PWM_L2
O
LC drive PWM output terminal
301
I2C 1
—
Open drain for IIC
302
I2C 2
—
Open drain for IIC
303, 304
TEST
—
Not used
305
CLKIN2
I
Clock signal input terminal (13.5 MHz or 27 MHz)
306
FS256
O
Master clock signal (256Fs=11.2896 MHz) output to A/D converter
307
ADDT
I
Data input from A/D converter
308
LRCK
O
L/R sampling clock signal (44.1kHz) output to external A/D converter
309
XBCK
O
Bit clock (2.8224 MHz) output to the external A/D converter
310
OSCI
I
Main system clock input terminal (22.5792 MHz)
311
OSCO
O
Main system clock output terminal (22.5792 MHz)
Not used
Not used
312
FS512
O
Clock signal output for class-D amplifier
313
DTCK
I/O
TSB master data clock input/output or SSB data input/output
Not used
314
UDP
I/O
USB data (+) input/output terminal
315
UDM
I/O
USB data (–) input/output terminal
316
USBHOLD
I
USB hold signal input terminal
317
SUSPEND
O
USB suspend signal output
318
UPUEN
O
USB pull-up resistor connection control output terminal
319
UOSCI
I
Resonator (48MHz) connection terminal for the USB oscillation circuit
320
UOSCO
O
Resonator (48MHz) connection terminal for the USB oscillation circuit
321 to 325
NC
—
Not used
46
Not used
MZ-NH700/NHF800
SECTION 7
EXPLODED VIEWS
NOTE:
• -XX and -X mean standardized parts, so they
may have some difference from the original
one.
• Color Indication of Appearance Parts
Example:
KNOB, BALANCE (WHITE) . . . (RED)
↑
↑
Parts Color Cabinet's Color
• Abbreviation
AUS : Australian model
CH : Chinese model
CND : Canadian model
E15 : Iran model
7-1.
• Items marked “*” are not stocked since they
are seldom required for routine service. Some
delay should be anticipated when ordering
these items.
• The mechanical parts with no reference
number in the exploded views are not supplied.
• Accessories are given in the last of the
electrical parts list.
The components identified by mark
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque 0 sont critiquens pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
JE : Tourist model
KR : Korean model
MX : Mexican model
E18 : 100 V - 240 V AC area in E model
E91 : 220 V area in E model
EE : East Europian model
HK : Hong Kong model
CASE (LOWER) SECTION
case (upper) section
2
1
chassis section
10
9
11
3
8
4
4
6
7
5
Ref. No.
4
Part No.
Description
Remark
1
2
3
4
4
3-241-529-01
3-266-200-01
3-266-207-01
3-234-449-17
3-234-449-19
SCREW, STEP
SPRING (L), TORSION COIL
CAP (USB)
SCREW (M1.4) (NHF800)
SCREW (M1.4) (NH700)
5
5
5
6
3-266-208-01
3-266-208-11
3-266-208-31
3-266-206-01
LID, BATTERY CASE (for SILVER) (NH700)
LID, BATTERY CASE (for BLUE) (NH700)
LID, BATTERY CASE (NHF800)
KNOB (OPEN) (for SILVER) (NH700)
Ref. No.
Part No.
Description
6
6
7
7
7
3-266-206-21
3-266-206-41
3-266-205-01
3-266-205-11
3-266-205-31
KNOB (OPEN) (for BLUE) (NH700)
KNOB (OPEN) (NHF800)
CASE (LOWER) (for SILVER) (NH700)
CASE (LOWER) (for BLUE) (NH700)
CASE (LOWER) (NHF800)
8
9
10
11
3-242-558-01
2-190-583-01
2-190-583-11
2-055-327-01
SPACER (LINE IN)
SPACER (BATT CASE)
SPACER (BATT CASE)
LEAF (LOWER), COPPER
Remark
47
MZ-NH700/NHF800
7-2.
CASE (UPPER) SECTION
51
52
53
not supplied
54
55
56
57
58
59
60
55
Ref. No.
51
Part No.
Description
Remark
52
X-2023-315-1 CASE (UPPER) (S) SUB ASSY (for SILVER)
(NH700)
X-2023-316-1 CASE (UPPER) (L) SUB ASSY (for BLUE)
(NH700)
X-2023-317-1 CASE (UPPER) (2BAND) SUB ASSY
(NHF800: EXCEPT US)
X-2023-318-1 CASE (UPPER) (4BAND) SUB ASSY
(NHF800: US)
3-249-687-41 KNOB (HOLD) (for SILVER) (NH700)
52
52
3-249-687-51 KNOB (HOLD) (for BLUE) (NH700)
3-249-687-71 KNOB (HOLD) (NHF800)
51
51
51
48
Ref. No.
53
54
55
56
57
58
59
60
Part No.
Description
Remark
3-264-154-01
3-266-189-01
3-254-014-01
3-266-190-01
BADGE (HI-MD)
OPEN LOCKER
SCREW
BUTTON (CONTROL) (NAVI/−MENU. GROUP.
x. X. T MARK/REC (+N))
3-266-193-01 KNOB (ROTARY)
3-266-192-01 ESCUTCHEON (5 DIRECTION)
(VOL +. >. VOL –. .)
3-266-191-01 KNOB (5 DIRECTION) (N ENT)
1-805-514-11 LCD MODULE
MZ-NH700/NHF800
7-3.
CHASSIS SECTION
109
117
mechanism deck section
110
118
123
114
118
118
106
108
119
115
118
MAIN board
111
107
105
113
116
104
111
121
112
103
120
122
124
102
101
125
Ref. No.
Part No.
Description
101
102
103
104
105
3-266-202-01
3-266-197-01
3-266-196-01
3-266-194-01
3-266-201-01
SPRING (OPEN), COMPRESSION COIL
OPEN SLIDER
CASE, BATTERY
MD STANDARD PIN
SPRING (R), EXTENSION
106
107
108
109
110
3-254-003-01
3-266-199-01
X-3385-056-1
3-246-996-01
X-2023-415-1
SCREW
SPRING (R), TORSION COIL
CHASSIS ASSY, SET
SCREW (MD), STEP
MAIN BOARD, COMPLETE (for SERVICE)
(NH700: CND, MX, AUS)
110
X-2023-416-1 MAIN BOARD, COMPLETE (for SERVICE)
(NH700: E18, E91, HK, KR, CH, JE)
X-2023-417-1 MAIN BOARD, COMPLETE (for SERVICE)
(NH700: AEP, UK, EE)
X-2023-418-1 MAIN BOARD, COMPLETE (for SERVICE)
(NHF800: US)
X-2023-419-1 MAIN BOARD, COMPLETE (for SERVICE)
(NHF800: CND, AUS)
110
110
110
Remark
Ref. No.
110
Part No.
Description
Remark
111
112
113
X-2023-420-1 MAIN BOARD, COMPLETE (for SERVICE)
(NHF800: E15, HK)
X-2023-421-1 MAIN BOARD, COMPLETE (for SERVICE)
(NHF800: AEP, UK, EE)
3-238-876-04 SCREW (M1.4), TOOTHED LOCK
3-266-204-01 TERMINAL (+), BATTERY
3-266-203-02 TERMINAL (–), BATTERY
114
115
116
117
118
2-148-293-01
3-242-558-01
1-400-711-11
2-178-287-01
2-179-912-01
SPRING (USB), LEAF
SPACER (LINE IN)
FILTER, EMI
SHEET (HP)
SHEET (CHASSIS)
119
120
121
122
123
2-177-905-01
2-177-906-01
2-187-174-01
2-179-913-01
2-178-288-01
SHEET (EMC H BRIDGE)
SHEET (EMC YUZU)
SHEET (EMC JACK)
SHEET (CASE BATTERY)
CUSHION (HP)
124
125
2-178-324-01 CUSHION (RODEO)
2-188-045-01 SHEET (EMC)
110
49
MZ-NH700/NHF800
7-4.
MECHANISM DECK SECTION
(MT-MZNH900-181)
159
158
161
not supplied HR601
(over write head)
157
154
M702
160
162
156
154
M703
M701
153
163
(including HR601 (over write head) )
155
153
152
153
151
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number specified.
Ref. No.
Part No.
Description
151
152
153
154
155
3-338-645-31
3-263-454-01
3-248-370-01
3-225-996-17
3-244-880-01
WASHER (0.8-2.5)
GEAR (BSA)
SCREW, SELF TAP
SCREW (M1.4) (EG), PRECISION PAN
SPRING, THRUST RETAINER
156
157
158
159
3-263-455-01
3-259-972-22
X-3384-651-2
X-3384-650-1
GEAR (SB)
CHASSIS (REC)
BASE ASSY, MOTOR
HOLDER ASSY
Remark
Ref. No.
Part No.
160
161
162
0 163
3-263-453-01
X-2023-272-1
3-244-879-01
X-2021-785-1
M701
50
M702
M703
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Description
Remark
PLATE, RATCHET
LEAD SCREW SERVICE ASSY
SPRING, RACK
OP SERVICE ASSY (ABX-U)
(including HR601(OVER WRITE HEAD))
8-835-782-12 MOTOR, DC SSM18D/C-NP (SPINDLE)
1-787-143-11 MOTOR, DC (SLED)
1-477-519-21 MOTOR UNIT, DC
(OVER WRITE HEAD UP/DOWN)
MZ-NH700/NHF800
SECTION 8
ELECTRICAL PARTS LIST
MAIN
NOTE:
• Items marked “*” are not stocked since they
• Due to standardization, replacements in the
are seldom required for routine service.
parts list may be different from the parts
Some delay should be anticipated when
specified in the diagrams or the components
ordering these items.
used on the set.
• SEMICONDUCTORS
• -XX and -X mean standardized parts, so they
In each case, u: µ, for example:
may have some difference from the original
uA... : µA...
uPA... : µPA...
one.
uPB... : µPB...
uPC... : µPC...
• RESISTORS
uPD... : µPD...
All resistors are in ohms.
• CAPACITORS
METAL: Metal-film resistor.
uF: µF
METAL OXIDE: Metal oxide-film resistor.
• COILS
F: nonflammable
uH: µH
• Abbreviation
E15 : Iran model
EE
: East Europian model
AUS : Australian model
E18 : 100 V - 240 V AC area in E model
HK
: Hong Kong model
CH
: Chinese model
E91 : 220 V area in E model
JE
: Tourist model
CND : Canadian model
Ref. No.
Part No.
Description
Les composants identifiés par une
marque 0 sont critiquens pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
When indicating parts by reference
number, please include the board.
KR
MX
: Korean model
: Mexican model
Remark
Ref. No.
X-2023-415-1 MAIN BOARD, COMPLETE (for SERVICE)
(NH700: CND, MX, AUS)
X-2023-416-1 MAIN BOARD, COMPLETE (for SERVICE)
(NH700: E18, E91, HK, KR, CH, JE)
X-2023-417-1 MAIN BOARD, COMPLETE (for SERVICE)
(NH700: AEP, UK, EE)
X-2023-418-1 MAIN BOARD, COMPLETE (for SERVICE) (US)
X-2023-419-1 MAIN BOARD, COMPLETE (for SERVICE)
(NHF800: CND, AUS)
X-2023-420-1 MAIN BOARD, COMPLETE (for SERVICE)
(NHF800: HK, E15)
X-2023-421-1 MAIN BOARD, COMPLETE (for SERVICE)
(NHF800: AEP, UK, EE)
*********************
C253
1-165-884-11 CERAMIC CHIP
2.2uF
C254
1-115-467-11 CERAMIC CHIP
0.22uF
C260
C302
C303
C304
C305
1-137-859-11
1-164-939-11
1-125-777-11
1-164-874-11
1-164-874-11
TANTALUM CHIP 220uF
CERAMIC CHIP 0.0022uF
CERAMIC CHIP 0.1uF
CERAMIC CHIP 100PF
CERAMIC CHIP 100PF
20%
10%
10%
5%
5%
4V
50V
10V
50V
50V
C306
C308
C310
C311
C312
1-125-777-11
1-125-777-11
1-135-259-11
1-125-777-11
1-100-539-11
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.1uF
TANTALUM CHIP 10uF
CERAMIC CHIP 0.1uF
TANTALUM CHIP 47uF
10%
10%
20%
10%
20%
10V
10V
6.3V
10V
6.3V
C313
C314
C315
C316
C318
1-100-539-11
1-125-777-11
1-165-851-91
1-119-750-11
1-135-149-21
TANTALUM CHIP 47uF
CERAMIC CHIP 0.1uF
TANTALUM CHIP 10uF
TANTALUM CHIP 22uF
TANTALUM CHIP 2.2uF
20%
10%
20%
20%
10%
6.3V
10V
6.3V
6.3V
10V
C319
C320
C321
C322
C323
1-125-777-11
1-135-149-21
1-100-539-11
1-125-777-11
1-135-259-11
CERAMIC CHIP 0.1uF
TANTALUM CHIP 2.2uF
TANTALUM CHIP 47uF
CERAMIC CHIP 0.1uF
TANTALUM CHIP 10uF
10%
10%
20%
10%
20%
10V
10V
6.3V
10V
6.3V
C324
C325
C327
C328
C351
1-125-777-11
1-125-777-11
1-125-837-11
1-125-837-11
1-125-837-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
1uF
1uF
1uF
10%
10%
10%
10%
10%
10V
10V
6.3V
6.3V
6.3V
C352
C353
C354
C355
C356
1-135-259-11
1-125-777-11
1-135-151-21
1-165-884-11
1-135-201-11
TANTALUM CHIP 10uF
CERAMIC CHIP 0.1uF
TANTALUM CHIP 4.7uF
CERAMIC CHIP 2.2uF
TANTALUM CHIP 10uF
20%
10%
20%
10%
20%
6.3V
10V
4V
6.3V
4V
C361
C363
C364
C402
C403
1-164-943-11
1-125-777-11
1-125-777-11
1-100-609-11
1-100-609-11
CERAMIC CHIP 0.01uF
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.1uF
TANTALUM CHIP 220uF
TANTALUM CHIP 220uF
10%
10%
10%
16V
10V
10V
5V
5V
C406
C407
C408
C411
C412
1-125-777-11
1-125-777-11
1-125-777-11
1-119-751-11
1-125-777-11
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.1uF
TANTALUM CHIP 22uF
CERAMIC CHIP 0.1uF
10%
10%
10%
20%
10%
10V
10V
10V
16V
10V
1-400-711-11 FILTER, EMI
3-242-558-01 SPACER (LINE IN)
3-266-203-02 TERMINAL (-), BATTERY
< CAPACITOR >
C101
C102
C104
C105
C106
1-164-874-11
1-165-884-11
1-164-939-11
1-125-777-11
1-164-937-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100PF
2.2uF
0.0022uF
0.1uF
0.001uF
5%
10%
10%
10%
10%
50V
6.3V
50V
10V
50V
C107
C108
C151
C152
C153
1-131-862-11
1-135-210-11
1-164-941-11
1-164-939-11
1-125-837-11
TANTALUM CHIP 47uF
TANTALUM CHIP 4.7uF
CERAMIC CHIP 0.0047uF
CERAMIC CHIP 0.0022uF
CERAMIC CHIP 1uF
20%
20%
10%
10%
10%
4V
10V
16V
50V
6.3V
(US)
C153
1-165-884-11 CERAMIC CHIP
C154
C160
C201
C202
1-115-467-11
1-137-859-11
1-164-874-11
1-165-884-11
CERAMIC CHIP 0.22uF
TANTALUM CHIP 220uF
CERAMIC CHIP 100PF
CERAMIC CHIP 2.2uF
6.3V
(EXCEPT US)
10%
10V
20%
4V
5%
50V
10%
6.3V
C204
C205
C206
C207
C208
1-164-939-11
1-125-777-11
1-164-937-11
1-131-862-11
1-135-210-11
CERAMIC CHIP 0.0022uF
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.001uF
TANTALUM CHIP 47uF
TANTALUM CHIP 4.7uF
10%
10%
10%
20%
20%
C251
C252
C253
1-164-941-11 CERAMIC CHIP
1-164-939-11 CERAMIC CHIP
1-125-837-11 CERAMIC CHIP
2.2uF
10%
0.0047uF 10%
0.0022uF 10%
1uF
10%
50V
10V
50V
4V
10V
16V
50V
6.3V
(US)
Part No.
The components identified by mark
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number
specified.
Description
Remark
10%
6.3V
(EXCEPT US)
10%
10V
51
MZ-NH700/NHF800
MAIN
Ref. No.
Part No.
Description
C415
C416
C419
C420
C421
1-125-777-11
1-125-777-11
1-125-777-11
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
C423
C424
C425
C426
C427
1-100-609-11
1-100-609-11
1-125-777-11
1-119-751-11
1-125-777-11
C429
C430
C434
C438
C452
Remark
10%
10%
10%
10%
10%
10V
10V
10V
10V
10V
TANTALUM CHIP 220uF
TANTALUM CHIP 220uF
CERAMIC CHIP 0.1uF
TANTALUM CHIP 22uF
CERAMIC CHIP 0.1uF
10%
20%
10%
5V
5V
10V
16V
10V
1-125-777-11
1-164-937-11
1-125-777-11
1-107-826-11
1-107-826-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.001uF
0.1uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
10V
50V
10V
16V
16V
C453
C455
C456
C457
C458
1-165-176-11
1-164-939-11
1-164-939-11
1-107-826-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.047uF
0.0022uF
0.0022uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
16V
50V
50V
16V
10V
C459
C460
C461
C476
C478
1-125-777-11
1-125-777-11
1-125-777-11
1-164-937-11
1-164-943-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.001uF
0.01uF
10%
10%
10%
10%
10%
10V
10V
10V
50V
16V
C479
C480
C481
C511
C513
1-125-777-11
1-165-884-11
1-125-837-11
1-125-777-11
1-164-943-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
2.2uF
1uF
0.1uF
0.01uF
10%
10%
10%
10%
10%
10V
6.3V
6.3V
10V
16V
C515
C516
C517
C518
C519
1-125-777-11
1-125-777-11
1-125-777-11
1-135-210-11
1-125-777-11
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.1uF
TANTALUM CHIP 4.7uF
CERAMIC CHIP 0.1uF
10%
10%
10%
20%
10%
10V
10V
10V
10V
10V
C520
C521
C522
C523
C524
1-125-777-11
1-164-850-11
1-164-850-11
1-125-777-11
1-162-970-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
10PF
10PF
0.1uF
0.01uF
10%
0.5PF
0.5PF
10%
10%
10V
50V
50V
10V
25V
C525
C526
C527
C528
C529
1-164-941-11
1-164-874-11
1-125-777-11
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.0047uF
100PF
0.1uF
0.1uF
0.1uF
10%
5%
10%
10%
10%
16V
50V
10V
10V
10V
C530
C531
C533
C536
C537
1-125-837-11
1-164-943-11
1-164-943-11
1-107-819-11
1-125-837-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.01uF
0.01uF
0.022uF
1uF
10%
10%
10%
10%
10%
6.3V
16V
16V
16V
6.3V
C538
C539
C545
C547
C550
1-164-937-11
1-125-837-11
1-125-777-11
1-119-923-11
1-119-923-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
1uF
0.1uF
0.047uF
0.047uF
10%
10%
10%
10%
10%
50V
6.3V
10V
10V
10V
C552
C553
C554
1-164-943-11 CERAMIC CHIP 0.01uF
1-135-210-11 TANTALUM CHIP 4.7uF
1-125-777-11 CERAMIC CHIP 0.1uF
10%
20%
10%
16V
10V
10V
52
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
Ref. No.
Part No.
Description
Remark
C555
C556
1-164-941-11 CERAMIC CHIP 0.0047uF 10%
1-135-210-11 TANTALUM CHIP 4.7uF
20%
16V
10V
C557
C558
C559
C560
C561
1-125-777-11
1-164-937-11
1-164-941-11
1-125-777-11
1-125-837-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10%
10%
10%
10%
10%
10V
50V
16V
10V
6.3V
C562
C564
C565
C566
C567
1-125-837-11
1-135-210-11
1-125-777-11
1-125-777-11
1-135-210-11
CERAMIC CHIP 1uF
TANTALUM CHIP 4.7uF
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.1uF
TANTALUM CHIP 4.7uF
10%
20%
10%
10%
20%
6.3V
10V
10V
10V
10V
C568
C569
C570
C573
C574
1-164-943-11
1-164-943-11
1-165-847-91
1-164-937-11
1-125-777-11
CERAMIC CHIP 0.01uF
CERAMIC CHIP 0.01uF
TANTALUM CHIP 4.7uF
CERAMIC CHIP 0.001uF
CERAMIC CHIP 0.1uF
10%
10%
20%
10%
10%
16V
16V
10V
50V
10V
C601
C602
C604
C607
C609
1-125-837-11
1-125-777-11
1-125-777-11
1-125-837-11
1-125-837-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.1uF
0.1uF
1uF
1uF
10%
10%
10%
10%
10%
6.3V
10V
10V
6.3V
6.3V
C611
C612
C613
C614
C616
1-164-943-11
1-119-750-11
1-119-750-11
1-119-750-11
1-165-897-11
CERAMIC CHIP 0.01uF
TANTALUM CHIP 22uF
TANTALUM CHIP 22uF
TANTALUM CHIP 22uF
TANTALUM CHIP 22uF
10%
20%
20%
20%
20%
16V
6.3V
6.3V
6.3V
10V
C619
C620
C621
C622
C625
1-125-837-11
1-119-923-11
1-135-201-11
1-100-539-11
1-125-777-11
CERAMIC CHIP 1uF
CERAMIC CHIP 0.047uF
TANTALUM CHIP 10uF
TANTALUM CHIP 47uF
CERAMIC CHIP 0.1uF
10%
10%
20%
20%
10%
6.3V
10V
4V
6.3V
10V
C627
C628
C630
C633
C634
1-100-539-11
1-125-837-11
1-125-777-11
1-164-943-11
1-125-837-11
TANTALUM CHIP 47uF
CERAMIC CHIP 1uF
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.01uF
CERAMIC CHIP 1uF
20%
10%
10%
10%
10%
6.3V
6.3V
10V
16V
6.3V
C635
C636
C637
C638
C641
1-100-539-11
1-125-777-11
1-165-851-91
1-164-939-11
1-164-943-11
TANTALUM CHIP 47uF
CERAMIC CHIP 0.1uF
TANTALUM CHIP 10uF
CERAMIC CHIP 0.0022uF
CERAMIC CHIP 0.01uF
20%
10%
20%
10%
10%
6.3V
10V
6.3V
50V
16V
C642
C643
C644
C645
C646
1-119-923-11
1-100-743-91
1-164-941-11
1-164-943-11
1-119-923-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.047uF
2.2uF
0.0047uF
0.01uF
0.047uF
10%
20%
10%
10%
10%
10V
16V
16V
16V
10V
C648
C649
C650
C652
C653
1-119-923-11
1-125-777-11
1-165-851-91
1-135-259-11
1-135-259-11
CERAMIC CHIP 0.047uF
CERAMIC CHIP 0.1uF
TANTALUM CHIP 10uF
TANTALUM CHIP 10uF
TANTALUM CHIP 10uF
10%
10%
20%
20%
20%
10V
10V
6.3V
6.3V
6.3V
C658
C660
C661
C666
C668
1-100-539-11
1-107-826-11
1-165-884-11
1-127-820-11
1-125-837-11
TANTALUM CHIP 47uF
CERAMIC CHIP 0.1uF
CERAMIC CHIP 2.2uF
CERAMIC CHIP 4.7uF
CERAMIC CHIP 1uF
20%
10%
10%
10%
10%
6.3V
16V
6.3V
16V
6.3V
0.1uF
0.001uF
0.0047uF
0.1uF
1uF
MZ-NH700/NHF800
MAIN
Part No.
Description
Remark
Ref. No.
C669
C671
C672
C673
C674
1-125-837-11
1-125-777-11
1-127-820-11
1-125-777-11
1-112-010-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CAP, CHIP MICA
1uF
0.1uF
4.7uF
0.1uF
33PF
10%
10%
10%
10%
5%
6.3V
10V
16V
10V
100V
C857
C858
1-164-858-11 CERAMIC CHIP
1-125-777-11 CERAMIC CHIP
C675
C676
C677
C701
C702
1-164-943-11
1-164-937-11
1-125-777-11
1-119-923-11
1-119-923-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.001uF
0.1uF
0.047uF
0.047uF
10%
10%
10%
10%
10%
16V
50V
10V
10V
10V
C859
C860
C861
C864
C883
C703
C705
C706
C707
C708
1-119-923-11
1-164-943-11
1-107-819-11
1-164-943-11
1-107-819-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.047uF
0.01uF
0.022uF
0.01uF
0.022uF
10%
10%
10%
10%
10%
10V
16V
16V
16V
16V
C709
C710
C712
C713
C714
1-164-943-11
1-107-819-11
1-125-777-11
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.022uF
0.1uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
16V
16V
10V
10V
10V
C715
C716
C717
C801
C802
1-125-777-11
1-125-777-11
1-125-777-11
1-164-847-11
1-164-847-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
7PF
7PF
10%
10%
10%
0.5PF
0.5PF
10V
10V
10V
50V
50V
C803
C804
C805
C808
C809
1-164-943-11
1-164-943-11
1-125-891-11
1-125-837-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.01uF
0.47uF
1uF
0.1uF
10%
10%
10%
10%
10%
16V
16V
10V
6.3V
10V
C810
C811
C812
C814
C816
1-125-777-11
1-125-777-11
1-125-837-11
1-125-777-11
1-100-539-11
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.1uF
CERAMIC CHIP 1uF
CERAMIC CHIP 0.1uF
TANTALUM CHIP 47uF
10%
10%
10%
10%
20%
10V
10V
6.3V
10V
6.3V
C817
C818
C819
C820
C821
1-125-777-11
1-165-851-91
1-100-539-11
1-125-777-11
1-125-777-11
CERAMIC CHIP 0.1uF
TANTALUM CHIP 10uF
TANTALUM CHIP 47uF
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.1uF
10%
20%
20%
10%
10%
10V
6.3V
6.3V
10V
10V
C822
C823
C827
C828
C830
1-125-777-11
1-125-777-11
1-125-777-11
1-164-937-11
1-164-937-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10%
10%
10%
10%
10%
10V
10V
10V
50V
50V
C832
C833
C835
C836
C838
1-125-837-11
1-125-837-11
1-125-777-11
1-165-851-91
1-165-851-91
CERAMIC CHIP 1uF
CERAMIC CHIP 1uF
CERAMIC CHIP 0.1uF
TANTALUM CHIP 10uF
TANTALUM CHIP 10uF
10%
10%
10%
20%
20%
6.3V
6.3V
10V
6.3V
6.3V
C839
C843
C845
C846
C847
1-125-777-11
1-125-777-11
1-100-539-11
1-125-777-11
1-125-777-11
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.1uF
TANTALUM CHIP 47uF
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.1uF
10%
10%
20%
10%
10%
10V
10V
6.3V
10V
10V
C850
C853
C856
1-125-777-11 CERAMIC CHIP
1-125-777-11 CERAMIC CHIP
1-125-777-11 CERAMIC CHIP
10%
10%
10%
10V
10V
10V
Ref. No.
0.1uF
0.1uF
0.1uF
0.001uF
0.001uF
0.1uF
0.1uF
0.1uF
Part No.
Description
Remark
22PF
0.1uF
5%
10%
50V
10V
1-125-777-11
1-125-777-11
1-125-777-11
1-107-826-11
1-135-259-11
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.1uF
TANTALUM CHIP 10uF
10%
10%
10%
10%
20%
10V
10V
10V
16V
6.3V
C884
C885
C886
C887
C891
1-135-259-11
1-125-837-11
1-164-943-11
1-125-837-11
1-125-777-11
TANTALUM CHIP 10uF
CERAMIC CHIP 1uF
CERAMIC CHIP 0.01uF
CERAMIC CHIP 1uF
CERAMIC CHIP 0.1uF
20%
10%
10%
10%
10%
6.3V
6.3V
16V
6.3V
10V
C892
C895
C901
C902
C903
1-125-777-11
1-125-777-11
1-125-777-11
1-125-777-11
1-164-943-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.1uF
0.01uF
10%
10%
10%
10%
10%
10V
10V
10V
10V
16V
C906
C908
C909
C915
C916
1-100-352-11
1-164-943-11
1-119-751-11
1-165-851-91
1-165-851-91
CERAMIC CHIP 1uF
CERAMIC CHIP 0.01uF
TANTALUM CHIP 22uF
TANTALUM CHIP 10uF
TANTALUM CHIP 10uF
20%
10%
20%
20%
20%
16V
16V
16V
6.3V
6.3V
C918
C919
C920
C922
C923
1-165-176-11
1-164-227-11
1-125-777-11
1-128-964-11
1-100-539-11
CERAMIC CHIP 0.047uF
CERAMIC CHIP 0.022uF
CERAMIC CHIP 0.1uF
TANTALUM CHIP 100uF
TANTALUM CHIP 47uF
10%
10%
10%
20%
20%
16V
25V
10V
6.3V
6.3V
C924
C926
C927
C928
C929
1-100-539-11
1-164-937-11
1-164-874-11
1-164-874-11
1-164-937-11
TANTALUM CHIP 47uF
CERAMIC CHIP 0.001uF
CERAMIC CHIP 100PF
CERAMIC CHIP 100PF
CERAMIC CHIP 0.001uF
20%
10%
5%
5%
10%
6.3V
50V
50V
50V
50V
C931
C932
C933
C935
C936
1-165-884-11
1-164-943-11
1-165-884-11
1-165-884-11
1-165-884-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
2.2uF
0.01uF
2.2uF
2.2uF
2.2uF
10%
10%
10%
10%
10%
6.3V
16V
6.3V
6.3V
6.3V
C937
C939
C940
C948
C954
1-165-884-11
1-119-750-11
1-119-750-11
1-119-750-11
1-164-937-11
CERAMIC CHIP 2.2uF
TANTALUM CHIP 22uF
TANTALUM CHIP 22uF
TANTALUM CHIP 22uF
CERAMIC CHIP 0.001uF
10%
20%
20%
20%
10%
6.3V
6.3V
6.3V
6.3V
50V
C958
C959
C960
C961
1-125-837-11
1-125-777-11
1-125-777-11
1-125-777-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10%
10%
10%
10%
6.3V
10V
10V
10V
1uF
0.1uF
0.1uF
0.1uF
< CONNECTOR >
CN451
CN471
CN501
CN701
1-818-190-21
1-818-543-21
1-818-545-21
1-818-540-21
CONNECTOR, SQUARE TYPE (USB) 7P (USB)
CONNECTOR, FFC/FPC (ZIF) 16P
CONNECTOR, FFC/FPC (ZIF) 26P
CONNECTOR, FFC/FPC (ZIF) 10P
< DIODE >
D151
D251
D301
D302
8-719-056-72
8-719-056-72
8-719-056-54
8-719-056-54
DIODE
DIODE
DIODE
DIODE
UDZ-TE-17-2.4B
UDZ-TE-17-2.4B
MAZS068008SO
MAZS068008SO
53
MZ-NH700/NHF800
Ver 1.1
MAIN
Ref. No.
Part No.
Description
D303
8-719-056-54 DIODE MAZS068008SO
D304
D352
D401
D435
D436
8-719-056-54
6-500-116-01
6-500-483-01
8-719-056-54
8-719-056-54
DIODE
DIODE
DIODE
DIODE
DIODE
MAZS068008SO
NNCD6.8H-T1
MA22D2800LS0
MAZS068008SO
MAZS068008SO
D439
D440
D441
D457
D458
6-500-483-01
6-500-483-01
8-719-056-54
6-500-483-01
8-719-422-49
DIODE
DIODE
DIODE
DIODE
DIODE
MA22D2800LS0
MA22D2800LS0
MAZS068008SO
MA22D2800LS0
MA8056-L
D471
D473
D601
D602
D603
8-719-072-27
8-719-056-54
6-500-813-01
8-719-072-27
8-719-072-27
DIODE
DIODE
DIODE
DIODE
DIODE
MA2Z748001S0
MAZS068008SO
MA2SD32008S0
MA2Z748001S0
MA2Z748001S0
D604
D605
D606
D607
D608
6-500-483-01
6-500-910-01
6-500-909-01
6-500-909-01
6-500-910-01
DIODE
DIODE
DIODE
DIODE
DIODE
MA22D2800LS0
MA2SD3000LS0
MA22D1700LS0
MA22D1700LS0
MA2SD3000LS0
D609
D610
D611
D613
D614
8-719-072-27
8-719-072-27
8-719-072-27
6-500-813-01
6-500-813-01
DIODE
DIODE
DIODE
DIODE
DIODE
MA2Z748001S0
MA2Z748001S0
MA2Z748001S0
MA2SD32008S0
MA2SD32008S0
D615
D616
D801
D803
D881
6-500-909-01
6-500-909-01
8-719-072-27
6-500-813-01
6-500-813-01
DIODE
DIODE
DIODE
DIODE
DIODE
MA22D1700LS0
MA22D1700LS0
MA2Z748001S0
MA2SD32008S0
MA2SD32008S0
D882
D883
D884
D885
D902
6-500-813-01
6-500-813-01
8-719-072-27
8-719-072-27
8-719-072-27
DIODE
DIODE
DIODE
DIODE
DIODE
MA2SD32008S0
MA2SD32008S0
MA2Z748001S0
MA2Z748001S0
MA2Z748001S0
D904
D905
D906
8-719-072-27 DIODE MA2Z748001S0
8-719-072-27 DIODE MA2Z748001S0
6-500-483-01 DIODE MA22D2800LS0
< FUSE >
F1
F351
Remark
Ref. No.
Part No.
Description
Remark
FB452
FB471
FB501
1-469-869-21 INDUCTOR (EMI FERRITE) (2012)
1-216-864-11 SHORT CHIP
0
1-400-620-21 INDUCTOR, FERRITE BEAD (1005)
FB502
FB503
FB801
FB802
FB803
1-216-864-11
1-216-864-11
1-216-864-11
1-216-864-11
1-414-760-21
FB807
FB809
FB810
1-216-864-11 SHORT CHIP
0
1-216-864-11 SHORT CHIP
0
1-414-760-21 INDUCTOR, FERRITE BEAD
SHORT CHIP
0
SHORT CHIP
0
SHORT CHIP
0
SHORT CHIP
0
INDUCTOR, FERRITE BEAD
< IC >
IC301
IC302
IC352
IC401
IC402
6-702-894-01
6-706-528-01
6-705-942-01
6-705-536-01
6-706-652-01
IC
IC
IC
IC
IC
AK5356VN-L
XC6219B212MR
TA2131FLG (EL)
MM1655NCBE
NJU7008F3 (TE1)
IC471
IC501
IC502
IC601
IC602
6-705-715-01
6-705-012-01
6-706-095-01
6-705-000-01
6-703-317-01
IC
IC
IC
IC
IC
XC6219B242MR
SN761059ZQLR
R1180Q301B-TR-FA
SC901585VAR2
R1160N121B-TR-FA
* IC603
IC604
IC605
IC606
IC607
6-706-038-01
6-706-079-01
6-706-214-01
6-702-590-01
8-759-690-72
IC
IC
IC
IC
IC
XC6209B322MR
R1180Q121C-TR-FA
TC7SL32FU (TE85R)
XC61CN1702NR
XC61CN0902NR
IC701
IC801
IC804
IC881
IC882
6-704-999-01
8-753-229-55
6-706-089-01
6-759-639-21
6-706-094-01
IC
IC
IC
IC
IC
BD6607KN
CXD2681-223GG
XC61CC2502NR
XC6382C251MR
R1180Q221B-TR-FA
IC892
IC901
IC902
(Not supplied) IC HN58X2564FPIEZ
6-704-997-01 IC SC901584EPR2
6-704-245-01 IC XC61CC1702NR
< JACK >
J301
J302
J352
J402
1-815-950-12
1-794-084-12
1-816-954-22
1-785-383-11
JACK (LINE IN (OPT))
JACK (MIC (PLUG IN POWER))
JACK (i)
JACK, DC (POLARITY UNIFIED TYPE)
(DC IN 3V)
1-576-462-21 FUSE (SMD) (1.5A/63V)
1-576-439-21 FUSE (SMD) (0.25A/125V)
< COIL/SHORT >
< FERRITE BEAD/SHORT >
FB1
FB2
FB101
FB201
FB301
1-400-808-21
1-469-179-21
1-500-284-21
1-500-284-21
1-216-864-11
INDUCTOR (EMI FERRITE)
INDUCTOR, FERRITE BEAD
INDUCTOR, FERRITE BEAD
INDUCTOR, FERRITE BEAD
SHORT CHIP
0
FB302
FB303
FB353
FB354
FB355
1-400-807-21
1-400-807-21
1-469-179-21
1-469-179-21
1-469-179-21
BEAD, FERRITE (1005)
BEAD, FERRITE (1005)
INDUCTOR, FERRITE BEAD
INDUCTOR, FERRITE BEAD
INDUCTOR, FERRITE BEAD
FB357
FB451
1-400-808-21 INDUCTOR (EMI FERRITE)
1-469-869-21 INDUCTOR (EMI FERRITE) (2012)
54
L303
L351
L501
L502
L503
1-400-397-11
1-216-295-00
1-216-295-00
1-400-397-11
1-400-397-11
INDUCTOR
SHORT CHIP
SHORT CHIP
INDUCTOR
INDUCTOR
10uH
0
0
10uH
10uH
L504
L505
L506
L507
L601
1-400-397-11
1-400-397-11
1-400-397-11
1-400-397-11
1-414-398-11
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
INDUCTOR
10uH
10uH
10uH
10uH
10uH
L603
L605
L606
1-414-398-11 INDUCTOR
1-416-669-11 INDUCTOR
1-400-626-11 INDUCTOR
10uH
22uH
10uH
MZ-NH700/NHF800
MAIN
Ref. No.
Part No.
Description
Remark
L607
L608
1-419-881-11 INDUCTOR
1-400-402-21 INDUCTOR
47uH
4.7uH
L701
L702
L801
L802
L803
1-216-295-00
1-216-295-00
1-400-397-11
1-400-343-21
1-216-001-00
SHORT CHIP
SHORT CHIP
INDUCTOR
INDUCTOR
RES-CHIP
0
0
10uH
22uH
10
5%
1/10W
L804
L805
L881
L901
L903
1-216-001-00
1-216-295-00
1-414-404-41
1-456-711-21
1-400-397-11
RES-CHIP
SHORT CHIP
INDUCTOR
COIL, CHOKE
INDUCTOR
10
5%
0
100uH
100uH (3.8X3.8)
10uH
1/10W
L904
L906
L907
L9001
1-400-397-11
1-456-677-21
1-456-677-21
1-414-398-11
INDUCTOR
COIL, CHOKE
COIL, CHOKE
INDUCTOR
10uH
47uH
47uH
10uH
Ref. No.
Part No.
Description
Q883
Q884
Q885
Q886
Q901
8-729-037-75
8-729-030-46
6-550-353-01
8-729-030-46
8-729-053-71
TRANSISTOR
TRANSISTOR
FET
TRANSISTOR
FET
Q902
8-729-427-74 TRANSISTOR
Remark
UN9214J-(TX).SO
XP4314-TX
SI1410EDH-T1
XP4314-TX
TS8K1TB
XP4601
< RESISTOR >
< FILTER >
LF401
LF451
1-411-957-11 FILTER, COMMON MODE
1-456-111-11 COIL, COMMON MODE CHOKE
R101
R103
R105
R106
R107
1-208-927-11
1-208-715-11
1-218-990-11
1-208-911-11
1-208-715-11
R151
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
47K
22K
0
10K
22K
0.5%
0.5%
1/16W
1/16W
0.5%
0.5%
1/16W
1/16W
1-218-961-11 RES-CHIP
4.7K
5%
R151
1-218-965-11 RES-CHIP
10K
R152
1-218-957-11 RES-CHIP
2.2K
R152
1-218-961-11 RES-CHIP
4.7K
R153
1-218-965-11 RES-CHIP
10K
1/16W
(US)
5%
1/16W
(EXCEPT US)
5%
1/16W
(EXCEPT US)
5%
1/16W
(US)
5%
1/16W
R154
R155
R156
R157
R158
1-218-965-11
1-218-929-11
1-218-961-11
1-208-683-11
1-208-691-11
10K
10
4.7K
1K
2.2K
5%
5%
5%
0.5%
0.5%
R160
R160
1-218-990-11 SHORT CHIP
1-208-635-11 METAL CHIP
R161
1-208-643-11 METAL CHIP
R162
R201
1-218-990-11 SHORT CHIP
1-208-927-11 METAL CHIP
0 (EXCEPT AEP, UK, EE)
10
0.5% 1/16W
(AEP, UK, EE)
22
0.5% 1/16W
(AEP, UK, EE)
0
47K
0.5% 1/16W
R203
R205
R206
R207
R251
1-208-715-11
1-218-990-11
1-208-911-11
1-208-715-11
1-218-961-11
22K
0
10K
22K
4.7K
0.5%
1/16W
0.5%
0.5%
5%
1/16W
1/16W
1/16W
(US)
R251
1-218-965-11 RES-CHIP
10K
5%
R252
1-218-957-11 RES-CHIP
2.2K
R252
1-218-961-11 RES-CHIP
4.7K
R253
R254
1-218-965-11 RES-CHIP
1-218-965-11 RES-CHIP
10K
10K
R255
R256
R257
R258
R260
1-218-929-11
1-218-961-11
1-208-683-11
1-208-691-11
1-218-990-11
10
5%
1/16W
4.7K
5%
1/16W
1K
0.5% 1/16W
2.2K
0.5% 1/16W
0 (EXCEPT AEP, UK, EE)
R260
1-208-635-11 METAL CHIP
10
R261
1-208-643-11 METAL CHIP
22
R262
R301
R304
1-218-990-11 SHORT CHIP
1-218-953-11 RES-CHIP
1-218-977-11 RES-CHIP
0
1K
100K
< TRANSISTOR >
Q301
Q351
Q352
Q353
Q401
8-729-051-23
8-729-037-52
8-729-030-46
6-550-353-01
6-550-326-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
FET
TRANSISTOR
2SA2018TL
2SD2216J-QR (TX).SO
XP4314-TX
SI1410EDH-T1
FZT968TA
Q403
Q406
Q407
Q432
Q433
6-550-353-01
8-729-427-74
8-729-037-75
8-729-044-57
8-729-037-52
FET
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
SI1410EDH-T1
XP4601
UN9214J-(TX).SO
FZT688B-TP
2SD2216J-QR (TX).SO
Q451
Q452
Q471
Q501
Q502
6-550-354-01
8-729-427-74
8-729-429-44
6-550-674-01
8-729-051-23
FET
TRANSISTOR
TRANSISTOR
FET
TRANSISTOR
RTQ035P02TR
XP4601
XP1501
MCH6604-K-TL-E
2SA2018TL
Q503
Q504
Q601
Q602
Q603
8-729-037-52
8-729-037-89
6-550-357-01
6-550-740-01
8-729-053-71
TRANSISTOR
TRANSISTOR
FET
FET
FET
2SD2216J-QR (TX).SO
2SC4627J-C (TX).SO
CPH5614-TL-E
MCH6617-TL-E
TS8K1TB
Q607
Q608
Q609
Q611
Q612
8-729-037-52
8-729-030-46
6-550-859-01
6-550-353-01
8-729-049-81
TRANSISTOR
TRANSISTOR
FET
FET
FET
2SD2216J-QR (TX).SO
XP4314-TX
NTHD4508NT1G
SI1410EDH-T1
SSM3K01F (TE85L)
Q613
Q614
Q615
Q616
Q617
8-729-047-68
8-729-427-74
6-550-353-01
6-550-353-01
8-729-427-74
FET
TRANSISTOR
FET
FET
TRANSISTOR
SSM3K03FE (TPL3)
XP4601
SI1410EDH-T1
SI1410EDH-T1
XP4601
Q618
Q801
Q802
Q803
Q881
8-729-427-74
8-729-047-68
8-729-051-50
8-729-037-52
8-729-427-74
TRANSISTOR
FET
FET
TRANSISTOR
TRANSISTOR
XP4601
SSM3K03FE (TPL3)
XP152A12C0MR
2SD2216J-QR (TX).SO
XP4601
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
(EXCEPT US)
5%
1/16W
(EXCEPT US)
5%
1/16W
(US)
5%
1/16W
5%
1/16W
0.5% 1/16W
(AEP, UK, EE)
0.5% 1/16W
(AEP, UK, EE)
5%
5%
1/16W
1/16W
55
MZ-NH700/NHF800
Ver 1.1
MAIN
Ref. No.
Part No.
Description
Remark
R305
R306
R307
R308
R309
1-218-941-11
1-218-965-11
1-218-941-11
1-216-864-11
1-218-953-11
RES-CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
100
10K
100
0
1K
5%
5%
5%
1/16W
1/16W
1/16W
5%
1/16W
R310
R312
R314
R315
R351
1-218-953-11
1-218-929-11
1-218-990-11
1-218-990-11
1-218-937-11
RES-CHIP
RES-CHIP
SHORT CHIP
SHORT CHIP
RES-CHIP
1K
10
0
0
47
5%
5%
1/16W
1/16W
5%
1/16W
R352
R353
R354
R355
R356
1-218-981-11
1-218-969-11
1-218-965-11
1-218-989-11
1-218-977-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
220K
22K
10K
1M
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R358
R359
R418
R419
R420
1-220-804-11
1-218-990-11
1-218-977-11
1-218-965-11
1-218-961-11
RES-CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
RES-CHIP
2.2M
0
100K
10K
4.7K
5%
1/16W
5%
5%
5%
1/16W
1/16W
1/16W
R421
R422
R423
R424
R425
1-218-977-11
1-218-989-11
1-218-981-11
1-218-985-11
1-218-957-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100K
1M
220K
470K
2.2K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R432
R433
R434
R435
R436
1-245-456-21
1-245-455-21
1-218-989-11
1-218-990-11
1-218-981-11
METAL CHIP
METAL CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
1
0.47
1M
0
220K
1%
1%
5%
1/5W
1/5W
1/16W
5%
1/16W
R437
R438
R441
R442
R443
1-218-981-11
1-218-977-11
1-218-977-11
1-218-977-11
1-218-977-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
220K
100K
100K
100K
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R444
R446
R447
R454
R455
1-218-977-11
1-218-990-11
1-218-990-11
1-216-864-11
1-218-989-11
RES-CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
RES-CHIP
100K
0
0
0
1M
5%
1/16W
5%
1/16W
R456
R462
R463
R464
R466
1-218-985-11
1-218-981-11
1-218-945-11
1-208-935-11
1-220-804-11
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
RES-CHIP
470K
220K
220
100K
2.2M
5%
5%
5%
0.5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R467
R471
R472
R473
R474
1-218-965-11
1-218-990-11
1-218-990-11
1-218-990-11
1-218-953-11
RES-CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
RES-CHIP
10K
0
0
0
1K
5%
1/16W
5%
1/16W
R475
R476
R477
R478
R480
1-218-990-11
1-208-699-11
1-208-699-11
1-218-961-11
1-218-977-11
SHORT CHIP
METAL CHIP
METAL CHIP
RES-CHIP
RES-CHIP
0
4.7K
4.7K
4.7K
100K
0.5%
0.5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R483
R484
1-218-985-11 RES-CHIP
1-218-981-11 RES-CHIP
470K
220K
5%
5%
1/16W
1/16W
56
Ref. No.
Part No.
Description
Remark
R485
R486
R489
1-218-985-11 RES-CHIP
1-218-990-11 SHORT CHIP
1-218-941-11 RES-CHIP
470K
0
100
5%
1/16W
5%
1/16W
R490
R491
R501
R502
R503
1-218-941-11
1-218-941-11
1-218-957-11
1-218-953-11
1-218-977-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100
100
2.2K
1K
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R504
R505
R507
R508
R509
1-218-977-11
1-218-929-11
1-218-957-11
1-218-957-11
1-218-990-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
100K
10
2.2K
2.2K
0
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R511
R512
R513
R514
R515
1-218-990-11
1-218-990-11
1-218-965-11
1-218-973-11
1-218-965-11
SHORT CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
RES-CHIP
0
0
10K
47K
10K
5%
5%
5%
1/16W
1/16W
1/16W
R516
R517
R518
R519
R520
1-218-973-11
1-218-965-11
1-218-973-11
1-218-953-11
1-218-949-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
47K
10K
47K
1K
470
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R521
R522
R524
R525
R526
1-218-990-11
1-218-990-11
1-218-945-11
1-216-864-11
1-216-864-11
SHORT CHIP
SHORT CHIP
RES-CHIP
SHORT CHIP
SHORT CHIP
0
0
220
0
0
5%
1/16W
R561
R601
R605
R608
R609
1-218-981-11
1-218-981-11
1-218-953-11
1-218-446-11
1-218-977-11
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
RES-CHIP
220K
220K
1K
1
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/10W
1/16W
R612
R616
R617
R618
R619
1-220-804-11
1-218-953-11
1-218-953-11
1-218-977-11
1-218-977-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
2.2M
1K
1K
100K
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R620
R621
R622
R623
R624
1-244-161-11
1-244-161-11
1-244-161-11
1-244-161-11
1-218-985-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
2.2
2.2
2.2
2.2
470K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R625
R628
R629
R635
R636
1-218-985-11
1-218-933-11
1-220-804-11
1-216-864-11
1-218-985-11
RES-CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
470K
22
2.2M
0
470K
5%
5%
5%
1/16W
1/16W
1/16W
5%
1/16W
R638
R639
R640
R641
R642
1-218-981-11
1-218-989-11
1-218-981-11
1-218-989-11
1-218-977-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
220K
1M
220K
1M
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R643
R645
R646
R647
R648
1-218-990-11
1-218-985-11
1-218-973-11
1-218-989-11
1-245-456-21
SHORT CHIP
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
0
470K
47K
1M
1
5%
5%
5%
1%
1/16W
1/16W
1/16W
1/5W
MZ-NH700/NHF800
Ver 1.1
MAIN
Ref. No.
Part No.
Description
Remark
Ref. No.
R826
R827
R829
1-218-990-11 SHORT CHIP
1-218-941-11 RES-CHIP
1-218-990-11 SHORT CHIP
0
100
5%
0 (NHF800)
R830
R832
R833
R837
R839
1-218-990-11
1-218-965-11
1-218-990-11
1-218-957-11
1-218-990-11
SHORT CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
SHORT CHIP
0
10K
0
2.2K
0
R840
R841
R842
R843
R845
1-218-990-11
1-218-929-11
1-218-973-11
1-218-957-11
1-216-864-11
SHORT CHIP
RES-CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
0
10
47K
2.2K
0
R855
R856
R857
R858
R860
1-218-990-11
1-218-990-11
1-218-985-11
1-208-927-11
1-218-929-11
SHORT CHIP
SHORT CHIP
RES-CHIP
METAL CHIP
RES-CHIP
0
0
470K
47K
10
R861
R862
R863
R864
R865
1-218-933-11
1-218-989-11
1-218-990-11
1-218-945-11
1-218-985-11
RES-CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
22
1M
0
220
470K
R866
R867
R868
R869
R872
1-218-990-11
1-218-989-11
1-218-990-11
1-218-990-11
1-218-965-11
SHORT CHIP
RES-CHIP
SHORT CHIP
SHORT CHIP
RES-CHIP
0
1M
0
0
10K
R873
R876
R878
R879
R880
1-218-965-11
1-218-990-11
1-218-937-11
1-218-937-11
1-218-937-11
RES-CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
RES-CHIP
10K
0
47
47
47
R881
R882
R883
R884
R885
1-218-981-11
1-218-985-11
1-218-989-11
1-218-985-11
1-218-989-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
R886
R887
R888
R889
R890
1-218-977-11
1-218-977-11
1-218-981-11
1-218-973-11
1-218-981-11
R891
R892
R893
R894
R895
R649
R650
R652
R653
R654
1-245-456-21
1-216-793-11
1-218-990-11
1-218-969-11
1-218-989-11
METAL CHIP
METAL CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
1
4.7
0
22K
1M
1%
5%
1/5W
1/10W
5%
5%
1/16W
1/16W
R657
R659
R660
R661
R662
1-218-990-11
1-218-977-11
1-218-985-11
1-218-985-11
1-218-985-11
SHORT CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
0
100K
470K
470K
470K
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R663
R664
R665
R668
R670
1-218-981-11
1-216-789-11
1-218-990-11
1-216-864-11
1-218-990-11
RES-CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
220K
2.2
0
0
0
5%
5%
1/16W
1/10W
R671
R673
R675
R677
R678
1-218-990-11
1-218-990-11
1-220-804-11
1-216-864-11
1-218-990-11
SHORT CHIP
SHORT CHIP
RES-CHIP
SHORT CHIP
SHORT CHIP
0
0
2.2M
0
0
R679
R680
R681
R682
R683
1-218-945-11
1-216-864-11
1-218-989-11
1-218-989-11
1-218-989-11
RES-CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
RES-CHIP
220
0
1M
1M
1M
5%
1/16W
5%
5%
5%
1/16W
1/16W
1/16W
R684
R685
R706
R707
R708
1-218-965-11
1-218-965-11
1-218-957-11
1-218-957-11
1-218-957-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
10K
10K
2.2K
2.2K
2.2K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R709
R710
R711
R712
R713
1-218-965-11
1-218-965-11
1-218-965-11
1-218-990-11
1-218-953-11
RES-CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
10K
10K
10K
0
1K
5%
5%
5%
1/16W
1/16W
1/16W
5%
1/16W
R801
R802
R804
R805
R806
1-218-961-11
1-218-990-11
1-218-933-11
1-218-933-11
1-218-961-11
RES-CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
RES-CHIP
4.7K
0
22
22
4.7K
5%
1/16W
5%
5%
5%
1/16W
1/16W
1/16W
R807
R808
R809
R810
R811
1-218-957-11
1-218-961-11
1-218-990-11
1-218-990-11
1-218-965-11
RES-CHIP
RES-CHIP
SHORT CHIP
SHORT CHIP
RES-CHIP
2.2K
4.7K
0
0
10K
5%
5%
1/16W
1/16W
5%
1/16W
R812
R813
R815
R817
R818
1-218-977-11
1-218-945-11
1-218-981-11
1-218-953-11
1-218-957-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100K
220
220K
1K
2.2K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R819
R820
R821
R822
R823
1-218-953-11
1-218-945-11
1-220-804-11
1-218-989-11
1-218-965-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
1K
220
2.2M
1M
10K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R824
R825
1-218-990-11 SHORT CHIP
1-218-990-11 SHORT CHIP
0
0
5%
Part No.
Description
Remark
1/16W
5%
1/16W
5%
1/16W
5%
5%
5%
1/16W
1/16W
1/16W
5%
0.5%
5%
1/16W
1/16W
1/16W
5%
5%
1/16W
1/16W
5%
5%
1/16W
1/16W
5%
1/16W
5%
1/16W
5%
1/16W
5%
5%
5%
1/16W
1/16W
1/16W
220K
470K
1M
470K
1M
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
100K
100K
220K
47K
220K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
1-218-990-11
1-218-981-11
1-220-804-11
1-218-977-11
1-218-977-11
SHORT CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
0
220K
2.2M
100K
100K
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R897
R903
R904
R906
R907
1-218-990-11
1-218-989-11
1-218-989-11
1-218-973-11
1-218-965-11
SHORT CHIP
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
0
1M
1M
47K
10K
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R908
R910
R912
R914
R917
1-218-969-11
1-218-969-11
1-218-981-11
1-208-911-11
1-218-981-11
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
RES-CHIP
22K
22K
220K
10K
220K
5%
5%
5%
0.5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
57
MZ-NH700/NHF800
MAIN
Ref. No.
Part No.
Description
Remark
R918
R920
R922
R924
R925
1-218-985-11
1-218-985-11
1-218-977-11
1-218-985-11
1-208-927-11
RES-CHIP
RES-CHIP
RES-CHIP
RES-CHIP
METAL CHIP
470K
470K
100K
470K
47K
5%
5%
5%
5%
0.5%
1/16W
1/16W
1/16W
1/16W
1/16W
R926
R927
R929
R930
R931
1-208-935-11
1-208-683-11
1-208-935-11
1-208-927-11
1-218-990-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
100K
1K
100K
47K
0
0.5%
0.5%
0.5%
0.5%
1/16W
1/16W
1/16W
1/16W
R933
R934
R935
R936
R937
1-208-943-11
1-208-715-11
1-208-935-11
1-208-927-11
1-208-715-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
220K
22K
100K
47K
22K
0.5%
0.5%
0.5%
0.5%
0.5%
1/16W
1/16W
1/16W
1/16W
1/16W
R938
R951
R952
R953
R954
1-208-927-11
1-218-990-11
1-218-990-11
1-220-803-81
1-218-985-11
METAL CHIP
SHORT CHIP
SHORT CHIP
RES-CHIP
RES-CHIP
47K
0
0
4.7
470K
0.5%
1/16W
5%
5%
1/16W
1/16W
R955
R958
R959
R960
R964
1-218-957-11
1-218-973-11
1-218-985-11
1-218-990-11
1-218-977-11
RES-CHIP
RES-CHIP
RES-CHIP
SHORT CHIP
RES-CHIP
2.2K
47K
470K
0
100K
5%
5%
5%
1/16W
1/16W
1/16W
5%
1/16W
< SWITCH >
S892
S893
S894
1-771-339-41 SWITCH, PUSH (HALF LOCK)
1-762-805-21 SWITCH, PUSH (1 KEY) (OPEN/COLSE DETECT)
1-786-703-21 SWITCH, PUSH (2 KEY)
(PROTECT DETECT, Hi-MD PROTECT DETECT)
< THERMISTOR (POSITIVE) >
THP401 1-805-580-11 THERMISTOR, POSITIVE
< VARISTOR >
VDR801 1-805-697-21 VARISTOR (SMD)
< VIBRATOR >
X801
1-813-353-21 VIBRATOR, CERAMIC (48MHz)
X802
1-813-314-11 VIBRATOR, CRYSTAL (22.5792MHz)
*************************************************************
MISCELLANEOUS
**************
60
0 163
1-805-514-11 LCD MODULE
X-2021-785-1 OP SERVICE ASSY (ABX-U)
(including HR601 (OVER WRITE HEAD) )
M701
8-835-782-12 MOTOR, DC SSM18D/C-NP (SPINDLE)
M702
1-787-143-11 MOTOR, DC (SLED)
M703
1-477-519-21 MOTOR UNIT, DC
(OVER WRITE HEAD UP/DOWN)
**************************************************************
Ref. No.
Part No.
Description
Remark
ACCESSORIES
************
0
1-543-793-41 FILTER, CLAMP (FERRITE CORE)
(for Optional Stereo Microphone)
1-543-798-31 FILTER, CLAMP (FERRITE CORE)
(for Optional Line Cable)
1-569-007-12 ADAPTOR, CONVERSION 2P (NH700: JE)
1-816-206-11 CONNECTOR, LIGHT
(NH700: AEP, UK, E18, E91, EE, AUS/
NHF800: AEP, UK, E15, EE, AUS)
1-816-206-21 CONNECTOR, LIGHT (NH700: HK, KR, CH, JE/
NHF800: HK)
3-220-749-01 CASE, CARRYING (EXCEPT NHF800: US)
3-223-571-01 CASE, BATTERY CARRYING
(EXCEPT NHF800: US)
3-266-457-11 MANUAL, INSTRUCTION (CZECH) (NH700: EE)
3-266-457-21 MANUAL, INSTRUCTION (HUNGARIAN)
(NH700: EE)
3-266-457-31 MANUAL, INSTRUCTION (POLISH) (NH700: EE)
3-266-457-41 MANUAL, INSTRUCTION (SLOVAKIAN)
(NH700: EE)
3-266-457-51 MANUAL, INSTRUCTION (RUSSIAN)
(NH700: EE)
3-266-457-61 MANUAL, INSTRUCTION
(TRADITIONAL CHINESE) (NH700: E18, HK)
3-266-457-71 MANUAL, INSTRUCTION (ENGLISH)
(NH700: CH, JE)
3-266-457-81 MANUAL, INSTRUCTION
(SIMPLIFIED CHINESE) (NH700: CH, JE)
3-266-457-91 MANUAL, INSTRUCTION (KOREAN)
(NH700: KR)
3-266-469-11 MANUAL, INSTRUCTION (ENGLISH)
(NH700: CND, AEP, UK, E18, EE, HK, AUS)
3-266-469-21 MANUAL, INSTRUCTION (FRENCH)
(NH700: CND, AEP)
3-266-469-31 MANUAL, INSTRUCTION (GERMAN)
(NH700: AEP)
3-266-469-41 MANUAL, INSTRUCTION (SPANISH)
(NH700: AEP, E91, MX)
3-266-469-51 MANUAL, INSTRUCTION (DUTCH)
(NH700: AEP)
3-266-469-61 MANUAL, INSTRUCTION (SWEDISH)
(NH700: AEP)
3-266-469-71 MANUAL, INSTRUCTION (ITALIAN)
(NH700: AEP)
3-266-469-81 MANUAL, INSTRUCTION (PORTUGUESE)
(NH700: AEP)
3-266-469-91 MANUAL, INSTRUCTION (FINNISH)
(NH700: AEP)
3-266-529-11 MANUAL, INSTRUCTION (ENGLISH)
(NHF800: CND)
3-266-529-21 MANUAL, INSTRUCTION (FRENCH)
(NHF800: CND)
3-266-529-31 MANUAL, INSTRUCTION (ENGLISH)
(NHF800: AEP, UK, E15, EE, HK, AUS)
3-266-529-41 MANUAL, INSTRUCTION (FRENCH)
(NHF800: AEP)
3-266-529-51 MANUAL, INSTRUCTION (GERMAN)
(NHF800: AEP)
3-266-529-61 MANUAL, INSTRUCTION (SPANISH)
(NHF800: AEP)
58
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
MZ-NH700/NHF800
Ver 1.1
Ref. No.
Remark
Ref. No.
Part No.
3-266-529-71 MANUAL, INSTRUCTION (DUTCH)
(NHF800: AEP)
3-266-529-81 MANUAL, INSTRUCTION (SWEDISH)
(NHF800: AEP)
3-266-529-91 MANUAL, INSTRUCTION (ITALIAN)
(NHF800: AEP)
3-266-571-11 MANUAL, INSTRUCTION (PORTUGUESE)
(NHF800: AEP)
0 508
0 508
1-478-373-11 ADAPTOR, AC (AC-ET307K) (NHF800: UK, HK)
1-478-374-11 ADAPTOR, AC (AC-ET307K) (NHF800: AUS)
0 508
509
1-478-377-11 ADAPTOR, AC (AC-ET307K) (NHF800: E15)
1-756-317-22 BATTERY, NICKEL HYDROGEN (NH-7WMAA)
(EXCEPT NH700: CND/NHF800: US, CND)
Part No.
Description
3-266-571-21 MANUAL, INSTRUCTION (FINNISH)
(NHF800: AEP)
3-266-571-31 MANUAL, INSTRUCTION (CZECH) (NHF800: EE)
3-266-571-41 MANUAL, INSTRUCTION (HUNGARIAN)
(NHF800: EE)
3-266-571-51 MANUAL, INSTRUCTION (POLISH)
(NHF800: EE)
3-266-571-61 MANUAL, INSTRUCTION (SLOVAKIAN)
(NHF800: EE)
3-266-571-71 MANUAL, INSTRUCTION (RUSSIAN)
(NHF800: EE)
3-266-571-81 MANUAL, INSTRUCTION
(TRADITIONAL CHINESE) (NHF800: E15, HK)
3-266-571-91 MANUAL, INSTRUCTION (ENGLISH)
(NHF800: US)
X-2022-247-4 CD-ROM (APPLICATION) ASSY
(NH700: CND/NHF800: US, CND)
X-2022-248-3 CD-ROM (APPLICATION) ASSY
(NH700: AEP, UK, EE/NHF800: AEP, UK, EE)
501
502
503
503
503
503
503
503
504
505
506
0 507
0 507
0 507
0 507
A-3172-192-A REMOTE CONTROL UNIT (RM-MC39LT)
(NHF800: E15, HK, AUS)
1-543-793-41 FILTER, CLAMP (FERRITE CORE)
1-543-798-31 FILTER, CLAMP (FERRITE CORE)
1-823-519-61 CORD, CONNECTION (DEDICATED USB CABLE)
1-477-965-21 ADAPTOR, AC (AC-ES3010K) (NH700: JE)
0 507
0 507
1-478-423-21 ADAPTOR, AC (AC-ES3010K) (NH700: KR)
1-478-424-21 ADAPTOR, AC (AC-ES3010K) (NH700: CH)
1-478-425-41 ADAPTOR, AC (AC-ES3010K)
(NH700: AEP, EE, E18, E91)
1-478-426-51 ADAPTOR, AC (AC-ES3010K) (NH700: UK, HK)
1-478-427-31 ADAPTOR, AC (AC-ES3010K) (NH700: CND,MX)
0 507
0 508
0 508
1-478-428-21 ADAPTOR, AC (AC-ES3010K) (NH700: AUS)
1-478-371-11 ADAPTOR, AC (AC-ET307K) (NHF800: US, CND)
1-478-372-11 ADAPTOR, AC (AC-ET307K) (NHF800: AEP, EE)
The components identified by
mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
Remark
501
502
Headphones (MDR-027SP) (1)
(US model)
Headphones/earphones (MDR-E808SP) (1)
(EXCEPT US model)
503
Remote control (1)
(RM-MC21 (NH700: EXCEPT CH, JE))
(RM-MC40ELK (NH700: CH, JE))
(RM-MC39LT (NHF800))
(RM-MC39LT)
(RM-MC21, RM-MC40ELK)
504
504
Clamp filter (Ferrite core) (Small) (1)
Clamp filter (Ferrite core) (Small) (1)
X-2023-448-1 CD-ROM (APPLICATION) ASSY
(NH700: E18, HK, KR, AUS, CH/
NHF800: E15, HK, AUS)
X-2023-449-1 CD-ROM (APPLICATION) ASSY
(NH700: E91, MX)
X-2023-450-1 CD-ROM (APPLICATION) ASSY (NH700: JE)
8-954-007-91 RECEIVER, EAR MDR-027SP/1 SET
(NHF800: US)
8-954-008-90 RECEIVER, EAR MDR-E808SP/C SET
(EXCEPT NHF800: US)
1-477-548-13 REMOTE CONTROL UNIT (RM-MC21)
(NH700: EXCEPT CH, JE)
1-478-468-21 REMOTE COMMANDER (RM-MC40ELK)
(NH700: CH, JE)
A-3172-189-A REMOTE CONTROL UNIT (RM-MC39LT)
(NHF800: US)
A-3172-190-A REMOTE CONTROL UNIT (RM-MC39LT)
(NHF800: CND)
A-3172-191-A REMOTE CONTROL UNIT (RM-MC39LT)
(NHF800: AEP, UK, EE)
Description
506
504
Dedicated USB cable (1)
Clamp filter (Ferrite core) (Small) (1)
505
Clamp filter (Ferrite core) (Lage) (2)
507
AC power adaptor (AC-ES3010K) (1)
504
Clamp filter (Ferrite core) (Small) (2)
508
AC power adaptor (AC-ET307K) (1)
504
Clamp filter (Ferrite core) (Small) (2)
505
Clamp filter (Ferrite core) (Large) (1)
509
NH-7WMAA Nickel metal
hydride rechargeable battery (1)
59
MZ-NH700/NHF800
REVISION HISTORY
Clicking the version allows you to jump to the revised page.
Also, clicking the version at the upper right on the revised page allows you to jump to the next revised
page.
Ver.
Date
Description of Revision
1.0
2004.07
New
1.1
2004.09
Change of all contents Test Mode and Electrical Adjustments
Change of Part No. for IC801, R312, R860 on the MAIN board and
AC Adaptor
Addition of “Position of Ferrite Core” in the Disassembly
(ECN-ECA12671/ECA30140/ECA37792/ECA40256)
2