TESDA-OP-NITESD-03-F01
(Assessment Instrument)
INSTITUTIONAL COMPETENCY
ASSESSMENT INSTRUMENT
Sector
:
AUTOMOTIVE AND LAND TRANSPORT SECTOR
Qualification
:
SOLAR AND BATTERY-POWERED VEHICLE
ASSEMBLY LEVEL II
Unit of Competency
:
PERFORM PREPARATORY PROCEDURES
FOR ASSEMBLING
TECHNICAL EDUCATION AND SKILLS DEVELOPMENT AUTHORITY
East Service Road, South Luzon Expressway (SLEX), Taguig City, Metro Manila
EVIDENCE PLAN
Competency Standard
Solar and battery-powered vehicle Assembly level II
Unit of Competencies
Covered


The evidence must show that the candidate …
Written
Ways in which evidence will be collected: (thick the column
Demonstration With
Oral Questioning
Perform Preparatory Procedures for Assembling
Assemble Mechanical Component
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Perform Preparatory Procedures for Assembling
LO1. Collect needed tools, parts and components
 Instructions are received from supervisors on the details of the job
to be performed.
 E-vehicles model’s specification are determined
 Needed tools, parts and components are collected depending on
the model and specifications.
 Specific tools for the tasks are prepared following work
requirements.
 All tools are inspected for functionality
 Inventory of tools, parts and tools and components Performed.
 Working area Prepared following work requirements.
LO2. Arrange the parts and components in a mock assembly process
 Unpack/unbox the parts to be assembled according to
specifications,
 Arrange the parts based on assembly order
 Inspect all parts and components for any damage or defects
 Check completeness of all parts and components
 Ensure all parts are complete and organized before final assembly.
Assemble Mechanical Component

LO1. Assemble Drive Train



NOTE: include all methods of assessment to be incorporated in the qualification/
module-specific Institutional Assessment
TABLE OF SPECIFICATION
Objectives,
Test Item Distribution
Content,
Knowledge Comprehension Application
Topics
1.1
1.2
1.3
1.4
1.5
1.6
1.7
2.1
2.2
2.3
2.4
2.5
Total No.
of Items
# of items
/% of test
RATING SHEET FOR DEMONSTRATION WITH ORAL QUESTIONING
Candidates Name
Qualification Title
Solar And Battery-Powered Vehicle Assembly Level Ii
Units of
Perform preparatory procedures for assembling
Competency
Covered
INSTRUCTION: Put a tick (✓) mark on the appropriate column. Write your
observation/comments on the REMARKS column.
PART I. Skills Demonstration
Not
Satisfactory
Remarks
Satisfactory
Did the candidate?
Collect needed tools, parts and
components
 Received instructions from supervisors on
the details of the job to be performed.
 Determined E-vehicles model’s
specification.
 Collected needed tools, parts and
components depending on the model and
specifications.
 Prepared specific tools for the tasks
following work requirements.
 Inspected all tools for functionality
 Performed inventory of tools, parts and
tools and components.
 Prepared working area following work
requirements.
Arrange the parts and components in a
mock assembly process
 Unpacked/unboxed the parts to be
assembled according to specifications,
 Arranged the parts based on assembly
order
 Inspected all parts and components for any
damage or defects
 Checked completeness of all parts and
components

Ensured all parts are complete and
organized before final assembly.




Areas for Improvement:
The candidate’s demonstration was:
Satisfactory
Not Satisfactory
QUESTIONING TOOL
Name of Trainee: ____________________________________________________
Date: ______________________________________________________________
Question to prove the candidate underpinning knowledge
Satisfactory
Response
YES
NO
1.
2.
3.
4.
5.
The candidate’s underpinning knowledge was:
Areas for Improvement:
_________________________
Trainer/ Learning Facilitator
________________________
Trainee
SPECIFIC INSTRUCTIONS TO CANDIDATE
INSTRUCTION
Qualification
SOLAR AND BATTERY-POWERED VEHICLE
ASSEMBLY LEVEL II
Unit of Competency
PERFORM PREPARATORY PROCEDURES
FOR
ASSEMBLY.
Duration
1.5 hours
Specific Instruction for the Trainee:
Given the necessary components, testing instruments, tools and equipment, you are
required to perform the following tasks specified below within the specified duration of 1.5
hours.
Assessment Methodology
Demonstration with oral questioning