Energy Ready Reference Guide
Gene ration • Di stribution • Transmi ssion
R ay che m Cabl e A cc e s s orie s , C o nn e c to rs , Fitt ing s , S urg e
Ar restors, Insul ators, C romp ton P ower Measu rement C ont rol
TE Energy
TE Energy is a global supplier to power utilities and power industry customers,
equipment manufacturers, and transport systems, with nearly 4,000 employees.
Home to Raychem and a number of other trusted product brands, our group offers
a wide variety of products that provide reliable connectivity from generation
to the end user. We have sales representatives in more than 80 countries and
manufacturing sites in five continents.
Our product range includes:
• Cable Accessories
• Connectors and Fittings
• Insulators
• Insulation and Wildlife Protection
• Surge Arresters
• Power Measurement and Control
• Distribution Components
• Street Lighting
MEDIUM VOLTAGE
CABLE ACCESSORIES
APKT heat-shrinkable termination system for cables up to 36 kV
………………………………………… 2
EPKT terminations for polymeric and MIND paper
insulated cables from 7.2 kV up to 36 kV
………………………………………………………………………… 5
IXSU-F/OXSU-F heat-shrinkable termination system with non-linear,
zinc oxide stress control for polymeric cables up to 24 kV
………………………………………………… 8
EPKJ joints for screened plastic and rubber insulated cables upto 36 kV
……………………………… 11
MXSU/MXST/MXSW/MXAW jointing system up to 36 kV complete with mechanical connectors
…… 13
SXSU/SXST/SXSW/SXAW joints for polymeric insulated cables from 12 kV up to 36 kV
………… 15
RICS insulated adapter termination system for SF6-insulated switchgear up to 24 kV
…………… 17
RSRB heat shrinkable insulating bushing boots up to 36 kV
…………………………………………… 19
CSJT silicone cold-shrink joint with inte grated stress control for XLPE cables up to 36 kV
……… 21
CSTI/CSTO silicone cold-shrink termination with integrated stress
control for XLPE cables up to 24 kV
…………………………………………………………………………… 22
ELBC - 810 screened separable connector up to 17.5 kV, 800 A
………………………………………… 24
ELBC - 824 screened separable connector up to 24 kV, 800 A
………………………………………… 26
RSTI-58 screened separable connector system, 800 A up to 24 kV
…………………………………… 28
RSTI-68 screened separable connector system, 1250 A up to 42 kV
………………………………… 30
RSES 400 A screened, separable elbow connection system 400 A for 24 kV and 36 kV
RSES / RSSS 250 A screened adaptor system 250 A, up to 24 kV
RCAB elastomeric insulating bushing boot for bushings up to 630 A, 24 kV
RPIT inner cone connector up to 52 kV, 1250 A
………… 32
…………………………………… 34
……………………… 36
……………………………………………………………… 38
Duyen Ha Power Equipment Co.,Ltd
1
Heat-Shrink Terminations
APKT
Heat-shrinkable termination system for cables up to 36 kV
General Description
Over the last three decades, engineers in utilities and industry around the world have
specified million’s of Raychem cable terminations at distribution voltages up to
36 kV. Raychem terminations have become identified with reliability because of their
unparalleled long-term performance – where it really counts – in the field. Today there
are many changes influencing the distribution of power at medium voltages.
MEDIUM VOLTAGE CABLE ACCESSORIES
Features & Benefits
2
• All applications for polymeric and MIND paper on 1-core, 3-core, armoured and
unarmoured cables
• Red non-tracking Raychem HVOT tubing provides excellent environmental protection
• Can be used in combination with Raychem RICS / RCAB / RSRB terminations
• Enhanced range-taking ability means that one kit fits more conductor sizes, reducing
stocking requirements
• Unlimited shelf life allows stocking of economic quantities without product spoilage
Simplifield cable
• Components are lightweight and non-shattering
• Clear instruction sheets
• Fully sealed against water ingress from the environment or from within the conductor
strands
• Compatible with all state of the art screen removal techniques
• No tapering of insulation required
• No polishing of polymeric insulation surface
• Factory engineered kit permits rapid on-site installation
• No mechanical stress at insulation screen cutback
• Termination accommodates same bending radius as cable
• Visual confirmation of correct assembly sequence possible after installation
• Rain skirts can be installed to allow either top or bottom feed
• No soldering of earthing accessories required
• Unsurpassed performance in polluted environments, proven over three decades.
Duyen Ha Power Equipment Co.,Ltd
Selection Information: dimensions shown in millimeters
XXXX
Product Family
- XX
X
X
X
X
-XX
-T
=APKT
Voltage
up to 7.2 kV
=7
12 and 17.5 kV
=17
24 kV
=24
36 kV
=36
7.2kV
12/17.5kV
mm
mm
2
24kV
36kV
mm
2
16-50
16-35
25-35
70-120
50-70
50-70
mm 2
2
=A
35-50
=B
150-240
95-240
95-185
300-500
300-400
240-400
15-185
=D
630-1000
500-800
500-630
240-500
=E
1000
70-120
800-1000
630-1000
=C
=F
Number of Cores
Single Core
=1
3-Core
=3
Dielectric or Insulation Type
XLPE
=X
Location of Installation
Indoor
=1
Outdoor
=O
Length of Termination Tail (3-Core only)
for 450 mm
=H1
for 650 mm
=H2
for 800 mm
=H3
for 1200 mm
=H4
MEDIUM VOLTAGE CABLE ACCESSORIES
Cable Cross Section
Accessories
Not include termination accessories such as cable lug, armour kit, ground connector, bolt & nut, earth braid.
Ordering Example:
APKT-17C 3X O-H3-T
Outdoor termination for 12/17.5 kV, 120 mm 2 3-core XLPE cable, tail length 800 mm.
Duyen Ha Power Equipment Co.,Ltd
3
R ayc he m te rm inatio n k it fo r X L P E c a ble w itho ut a rm o ur
Voltage
Cable Size
Single Core
(kV)
(mm 2 )
Indoor
Outdoor
Indoor
Outdoor
7.2
16 -50
A P K T 7A 1X I-H2-T
A P K T 7A 1XO -H2-T
A P K T 7A 3X I-H2-T
A P K T 7A 3XO -H2-T
70 -120
A P K T 7B 1X I-H2-T
A P K T 7B 1XO -H2-T
A P K T 7B 3X I-H2-T
A P K T 7B 3XO -H2-T
150 -24 0
A P K T 7C 1X I-H2-T
A P K T 7C 1XO -H2-T
A P K T 7C 3X I-H2-T
A P K T 7C 3XO -H2-T
30 0 -50 0
A P K T 7D 1X I-H2-T
A P K T 7D 1XO -H2-T
A P K T 7D 3X I-H2-T
A P K T 7D 3XO -H2-T
6 30 -10 0 0
A P K T 7E 1X I-H2-T
A P K T 7E 1XO -H2-T
-
-
15-35
A P K T 17A 1X I-H2-T
A P K T 17A 1XO -H2-T
A P K T 17A 3X I-H2-T
A P K T 17A 3XO -H2-T
50 -70
A P K T 17B 1X I-H2-T
A P K T 17B 1XO -H2-T
A P K T 17B 3X I-H2-T
A P K T 17B 3XO -H2-T
9 5-24 0
A P K T 17C 1X I-H2-T
A P K T 17C 1XO -H2-T
A P K T 17C 3X I-H2-T
A P K T 17C 3XO -H2-T
30 0 -4 0 0
A P K T 17D 1X I-H2-T
A P K T 17D 1XO -H2-T
A P K T 17D 3X I-H2-T
A P K T 17D 3XO -H2-T
50 0 -8 0 0
A P K T 17E 1X I-H2-T
A P K T 17E 1XO -H2-T
-
-
10 0 0
A P K T 17F 1X I-H2-T
A P K T 17F 1XO -H2-T
-
-
25-35
A P K T 24 A 1X I-H3-T
A P K T 24 A 1XO -H3-T
A P K T 24 A 3X I-H3-T
A P K T 24 A 3XO -H3-T
50 -70
A P K T 24 B 1X I-H3-T
A P K T 24 B 1XO -H3-T
A P K T 24 B 3X I-H3-T
A P K T 24 B 3XO -H3-T
9 5-18 5
A P K T 24 C 1X I-H3-T
A P K T 24 C 1XO -H3-T
A P K T 24 C 3X I-H3-T
A P K T 24 C 3XO -H3-T
24 0 -4 0 0
A P K T 24 D 1X I-H3-T
A P K T 24 D 1XO -H3-T
A P K T 24 D 3X I-H3-T
A P K T 24 D 3XO -H3-T
50 0 -6 30
A P K T 24 E 1X I-H3-T
A P K T 24 E 1XO -H3-T
-
-
8 0 0 -10 0 0
A P K T 24 F 1X I-H3-T
A P K T 24 F 1XO -H3-T
-
-
35-50
A P K T 36 B 1X I-H3-T
A P K T 36 B 1XO -H3-T
A P K T 36 B 3X I-H3-T
A P K T 36 B 3XO -H3-T
12-17.5
25-35
MEDIUM VOLTAGE CABLE ACCESSORIES
36
4
Three Core
70 -120
A P K T 36 C 1X I-H3-T
A P K T 36 C 1XO -H3-T
A P K T 36 C 3X I-H3-T
A P K T 36 C 3XO -H3-T
150 -18 5
A P K T 36 D 1X I-H3-T
A P K T 36 D 1XO -H3-T
A P K T 36 D 3X I-H3-T
A P K T 36 D 3XO -H3-T
24 0 -50 0
A P K T 36 E 1X I-H3-T
A P K T 36 E 1XO -H3-T
A P K T 36 E 3X I-H3-T
A P K T 36 E 3XO -H3-T
6 30 -10 0 0
A P K T 36 F 1X I-H3-T
A P K T 36 F 1XO -H3-T
-
-
Note: For armoured cables, please contact your local sales representative
Duyen Ha Power Equipment Co.,Ltd
Heat-Shrink Terminations
EPKT
Terminations for polymeric and MIND paper insulated
cables from 7.2 kV up to 36 kV
General Description
With millions of installations throughout the world, Raychem EPKT cable terminations
for up to 36 kV are acknowledged to be more reliable and quicker to install than
conventional systems.
A pr oven system
Consistent performance in extreme temperatures, atmospheric pollution and ultra-violet
light has proven the insulating and sealing ability of Raychem terminations for more than
35 years.
Features & Benefits
Duyen Ha Power Equipment Co.,Ltd
MEDIUM VOLTAGE CABLE ACCESSORIES
• All applications for polymeric and MIND paper on 1-core, 3-core, armoured and
unarmoured cables
• Red non-tracking Raychem HVOT tubing provides excellent environmental protection
• Can be used in combination with Raychem RICS / RCAB / RSRB
• Enhanced range-taking ability means that one kit fits more conductor sizes,reducing
stocking requirements
• Unlimited shelf life allows stocking of economic quantities without product spoilage
• Components are lightweight and non-shattering
• Clear instruction sheets
• Fully sealed against water ingress from the environment or from within the conductor
strands
• Compatible with all state of the art screen removal techniques
• No tapering of insulation required
• No polishing of polymeric insulation surface
• Factory engineered kit permits rapid on-site installation
• No mechanical stress at insulation screen cutback
• Termination accommodates same bending radius as cable
• Visual confirmation of correct assembly sequence possible after installation
• Rain skirts can be installed to allow either top or bottom feed
• No soldering of earthing accessories required
• Unsurpassed performance in polluted environments, proven over three decades.
5
S e le c tio n Info rm atio n: d im e nsio ns show n in m illim e te rs
XXXX
P ro d uc t F a m ily
- XX
X
X
X
X
-X X
XXX
=EPKT
Voltage
up to 7.2 kV
=7
12 and 17.5 kV
=17
24 kV
=24
36 kV
=36
MEDIUM VOLTAGE CABLE ACCESSORIES
C a ble c ro ss se c tio n
6
7.2 kV
12/17.5 kV
24 kV
36 kV
mm 2
mm 2
mm 2
mm 2
16-50
16-35
70-120
35-70
25-50
150-240
95-240
70-185
50-95
=C
300-500
300-400
240-400
120-185
=D
630-1000
500-800
500-630
240-500
=E
1000
800-1000
630-1000
=F
=A
=B
N um be r o f co re s
Single Core
=1
3-Core
=3
D ie le c tric o r insulatio n ty pe
Plastic
=X
MIND Paper
=M
L o c atio n o f insta llatio n
Indoor
=1
Outdoor
=O
L e ng th o f te rm inatio n ta il ( 3-C o re o nly )
for 450 mm
=H1
for 650 mm
=H2
for 800 mm
=H3
for 1200 mm
=H4
A cce sso rie s
If needed add mod. codes to termination kit
O rd e ring E xa m ple :
EPKT-17C 3M O-H3
Outdoor Termination for 12/17.5 kV, 120 mm
2
3-Core Paper Cable, tail length 800 mm.
Duyen Ha Power Equipment Co.,Ltd
R ayc he m E P K T Te rm inatio n K it F o r X L P E C a ble W itho ut A rm o ur
Cable Size
(mm 2 )
7.2
16 -50
70 -120
150 -24 0
30 0 -50 0
6 30 -10 0 0
15-35
50 -70
9 5-24 0
30 0 -4 0 0
50 0 -8 0 0
10 0 0
25-35
50 -70
9 5-18 5
24 0 -4 0 0
50 0 -6 30
8 0 0 -10 0 0
35-50
70 -120
150 -18 5
24 0 -50 0
6 30 -10 0 0
12/ 17.5
24
36
Singel Core
Three Core
Indoor
Outdoor
Indoor
Outdoor
E P K T 7A 1X I-H 2-T
E P K T 7B 1X I-H 2-T
E P K T 7C 1X I-H 2-T
E P K T 7D 1X I-H 2-T
E P K T 7E 1X I-H 2-T
E P K T 17A 1X I-H 2-T
E P K T 17B 1X I-H 2-T
E P K T 17C 1X I-H 2-T
E P K T 17D 1X I-H 2-T
E P K T 17E 1X I-H 2-T
E P K T 17F 1X I-H 2-T
E P K T 24 A 1X I-H 2-T
E P K T 24 B 1X I-H 2-T
E P K T 24 C 1X I-H 2-T
E P K T 24 D 1X I-H 2-T
E P K T 24 E 1X I-H 2-T
E P K T 24 F 1X I-H 2-T
E P K T 36 B 1X I-H 2-T
E P K T 36 C 1X I-H 2-T
E P K T 36 D 1X I-H 2-T
E P K T 36 E 1X I-H 2-T
E P K T 36 F 1X I-H 2-T
E P K T 7A 1XO -H 2-T
E P K T 7B 1XO -H 2-T
E P K T 7C 1XO -H 2-T
E P K T 7D 1XO -H 2-T
E P K T 7E 1XO -H 2-T
E P K T 17A 1XO -H 2-T
E P K T 17B 1XO -H 2-T
E P K T 17C 1XO -H 2-T
E P K T 17D 1XO -H 2-T
E P K T 17E 1XO -H 2-T
E P K T 17F 1XO -H 2-T
E P K T 24 A 1XO -H 3-T
E P K T 24 B 1XO -H 3-T
E P K T 24 C 1XO -H 3-T
E P K T 24 D 1XO -H 3-T
E P K T 24 E 1XO -H 3-T
E P K T 24 F 1XO -H 3-T
E P K T 36 B 1XO -H 3-T
E P K T 36 C 1XO -H 3-T
E P K T 36 D 1XO -H 3-T
E P K T 36 E 1XO -H 3-T
E P K T 36 F 1XO -H 3-T
E P K T 7A 3X I-H 2-T
E P K T 7B 3X I-H 2-T
E P K T 7C 3X I-H 2-T
E P K T 7D 3X I-H 2-T
E P K T 17A 3X I-H 2-T
E P K T 17B 3X I-H 2-T
E P K T 17C 3X I-H 2-T
E P K T 17D 3X I-H 2-T
E P K T 24 A 3X I-H 3-T
E P K T 24 B 3X I-H 3-T
E P K T 24 C 3X I-H 3-T
E P K T 24 D 3X I-H 3-T
E P K T 36 B 3X I-H 3-T
E P K T 36 C 3X I-H 3-T
E P K T 36 D 3X I-H 3-T
E P K T 36 E 3X I-H 3-T
-
E P K T 7A 3XO -H 2-T
E P K T 7B 3XO -H 2-T
E P K T 7C 3XO -H 2-T
E P K T 7D 3XO -H 2-T
E P K T 17A 3XO -H 2-T
E P K T 17B 3XO -H 2-T
E P K T 17C 3XO -H 2-T
E P K T 17D 3XO -H 2-T
E P K T 24 A 3XO -H 3-T
E P K T 24 B 3XO -H 3-T
E P K T 24 C 3XO -H 3-T
E P K T 24 D 3XO -H 3-T
E P K T 36 B 3XO -H 3-T
E P K T 36 C 3XO -H 3-T
E P K T 36 D 3XO -H 3-T
E P K T 36 E 3XO -H 3-T
-
Note: For armoured cables, please contact our local sales representative.
Technical reports (Others information can be provided as request.)
PPR-2920 Test report for MV termination EPKT in according with IEC60502
PPR-2375 Test report for MV termination EPKT in according with CENELEC HD629
PPR-1676 Type Approval Certificate of EPKT termination by DNV
Duyen Ha Power Equipment Co.,Ltd
MEDIUM VOLTAGE CABLE ACCESSORIES
Voltage
(kV)
7
Heat-Shrink Terminations
IXSU-F/OXSU-F
Heat-shrinkable termination system with non-linear, zinc oxide
stress control for polymeric cables up to 24 kV
General Description
The Raychem IXSU/OXSU series comprises a one-piece termination incorporating the
reliable red non-tracking environmental protection tube with a state of the art non
-linear, zinc oxide based stress control material. The zinc oxide is dispersed in a mastic
matrix and is co-extruded with the red non tracking tube. The mastic provides moisture
seals at the top and bottom of the termination, making for a fully integrated, Class 1,
one-piece termination. Indoor terminations require no rain sheds, making it ideal for
application in confined spaces, especially in the ship building industry. Discrete rain
sheds facilitate outdoor, inverted installations.
MEDIUM VOLTAGE CABLE ACCESSORIES
Features & Benefits
8
• All applications for polymeric 1-core, 3-core, armoured and unarmoured cables up to
24 kV
• Electrical Stress control based on Raychem ceramic semi-conductor technology (nonlinear zinc oxide) providing unsurpassed electrical performance
• The mastic based stress control is co-extruded with the proven red non-tracking
Raychem HVOT tubing creating a one-piece termination. Mastic also provides a
moisture seal at the ends of the termination.
• Can be used in combination with Raychem RICS / RCAB / RSRB bushing boots
• Enhanced range-taking ability means that one kit fits more conductor sizes, reducing
stocking requirements
• Unlimited shelf life allows stocking of economic quantities without product spoilage
• Components are lightweight and non-shattering
• Clear instruction sheets
• Fully sealed against water ingress from the environment or from within the conductor
strands
• Superior AC and impulse voltage withstand capability facilitates very short, shed less
terminations ideal for installation in confined spaces.
• The integrated stress control mastic also provides a moisture seal, eliminating the need
for separate, discrete seals, greatly simplifying installation
• Compatible with all state of the art screen removal techniques
• No tapering of insulation required
• No polishing of polymeric insulation surface
• Factory engineered kit permits rapid on-site installation
• No mechanical stress at insulation screen cutback
• Termination accommodates same bending radius as cable
• Visual confirmation of correct assembly sequence possible after installation
• Rain skirts can be installed to allow either top or bottom feed
• No soldering of earthing accessories required
• Unsurpassed performance in polluted environments, proven over three decades.
• Compatible for use with mechanical and crimp connectors
Duyen Ha Power Equipment Co.,Ltd
S e le c tio n Info rm atio n: d im e nsio ns show n in m illim e te rs
12 k V
Te rm inatio n fo r c rim p lug
S c re e ne d sing le c o re pla stic a nd rubbe r c a ble
Cross section
(mm 2 )
Kit number
Indoor
Kit number
Outdoor
Diameter over insulation
HD 620 A2 (mm)
10 – 35
25 – 9 5
9 5 – 24 0
24 0 – 50 0
50 0 – 8 0 0
8 0 0 – 120 0
IX S U -F 3111
IX S U -F 3121
IX S U -F 3131
IX S U -F 314 1
IX S U -F 3151
IX S U -F 316 1
O X S U -F 3111
O X S U -F 3121
O X S U -F 3131
O X S U -F 314 1
O X S U -F 3151
O X S U -F 316 1
16 .3
13.7 – 20 .8
18 .6 – 28 .4
25.7 – 36 .2
34 .0 – 4 2.2
39 .5 – 50 .0
Te rm inatio n w ith m e c ha nic a l lug B L MT
S c re e ne d sing le c o re pla stic a nd rubbe r c a ble
Cross section
(mm 2 )
25 – 9 5
9 5 – 24 0
120 – 30 0
18 5 – 4 0 0
50 0 – 6 30
12 k V
Kit number
Outdoor
IX S U -F 3111-ML-1-13
IX S U -F 3111-ML-1-17
IX S U -F 3121-ML-1-13
IX S U -F 3121-ML-1-17
IX S U -F 3131-ML-4 -13
IX S U -F 3131-ML-4 -17
IX S U -F 3131-ML-5-13
IX S U -F 3131-ML-5-17
IX S U -F 314 1-ML-6 -13
IX S U -F 314 1-ML-6 -17
IX S U -F 3151-ML-7-17
IX S U -F 3151-ML-7-21
O X S U -F 3111-ML-1-13
O X S U -F 3111-ML-1-17
O X S U -F 3121-ML-1-13
O X S U -F 3121-ML-1-17
O X S U -F 3131-ML-4 -13
O X S U -F 3131-ML-4 -17
O X S U -F 3131-ML-5-13
O X S U -F 3131-ML-5-17
O X S U -F 314 1-ML-6 -13
O X S U -F 314 1-ML-6 -17
O X S U -F 3151-ML-7-17
O X S U -F 3151-ML-7-21
Diameter over insulation
HD 620 A2 (mm)
13.7 – 16 .3
13.7 – 20 .8
18 .6 – 28 .4
20 .1 – 30 .4
23.2 – 33.6
34 .4 – 4 0 .0
Te rm inatio n fo r c rim p lug
S c re e ne d 3 -c o re pla stic a nd rubbe r c a ble w itho ut a rm o ur
Cross section
(mm 2 )
10 – 16
16 – 35
25 – 70
9 5 – 24 0
24 0 – 50 0
Tail Length
(mm)
Kit number
Indoor
Kit number
Outdoor
4 50
120 0
4 50
120 0
4 50
120 0
4 50
120 0
4 50
120 0
IX S U -F 330 1
IX S U -F 330 4
IX S U -F 3311
IX S U -F 3314
IX S U -F 3321
IX S U -F 3324
IX S U -F 3331
IX S U -F 3334
IX S U -F 334 1
IX S U -F 334 4
O X S U -F 330 1
O X S U -F 330 4
O X S U -F 3311
O X S U -F 3314
O X S U -F 3321
O X S U -F 3324
O X S U -F 3331
O X S U -F 3334
O X S U -F 334 1
O X S U -F 334 4
Te rm inatio n w ith m e c ha nic a l lug B L MT
S c re e ne d 3 -c o re pla stic a nd rubbe r c a ble w itho ut a rm o ur
Cross section
(mm 2 )
Tail Length
(mm)
4 50
25 – 35
120 0
4 50
25 – 70
120 0
4 50
9 5 – 24 0
120 0
4 50
30 0 – 4 0 0
120 0
Duyen Ha Power Equipment Co.,Ltd
Kit number
Indoor
Kit number
Outdoor
IX S U -F 3311-ML-1-13
IX S U -F 3311-ML-1-17
IX S U -F 3314 -ML-1-13
IX S U -F 3314 -ML-1-17
IX S U -F 3321-ML-1-13
IX S U -F 3321-ML-1-17
IX S U -F 3324 -ML-1-13
IX S U -F 3324 -ML-1-17
IX S U -F 3331-ML-4 -13
IX S U-F 3331-ML-4 -17
IX S U -F 3334 -ML-4 -13
IX S U -F 3334 -ML-4 -17
IX S U -F 334 1-ML-6 -13
IX S U -F 334 1-ML-6 -17
IX S U -F 334 1-ML-6 -21
IX S U -F 334 4 -ML-6 -13
IX S U -F 334 4 -ML-6 -17
IX S U -F 334 4 -ML-6 -21
O X S U -F 3311-ML-1-13
O X S U -F 3311-ML-1-17
O X S U -F 3314 -ML-1-13
O X S U -F 3314 -ML-1-17
O X S U -F 3321-ML-1-13
O X S U -F 3321-ML-1-17
O X S U -F 3324 -ML-1-13
O X S U -F 3324 -ML-1-17
O X S U -F 3331-ML-4 -13
O X S U -F 3331-ML-4 -17
O X S U -F 3334 -ML-4 -13
O X S U -F 3334 -ML-4 -17
O X S U -F 334 1-ML-6 -13
O X S U -F 334 1-ML-6 -17
O X S U -F 334 1-ML-6 -21
O X S U -F 334 4 -ML-6 -13
O X S U -F 334 4 -ML-6 -17
O X S U -F 334 4 -ML-6 -21
MEDIUM VOLTAGE CABLE ACCESSORIES
25 – 35
Kit number
Indoor
9
24 k V
Te rm inatio n fo r c rim p lug
S c re e ne d sing le co re pla stic a nd rubbe r c a ble
Cross section
(mm 2 )
Kit number
Indoor
Kit number
Outdoor
Diameter over insulation
HD 620 A2 (mm)
25 – 70
70 – 24 0
18 5 – 4 0 0
4 0 0 – 80 0
10 0 0 – 120 0
IX S U -F 5121
IX S U -F 5131
IX S U -F 514 1
IX S U -F 5151
IX S U -F 516 1
O X S U -F 5121
O X S U -F 5131
O X S U -F 514 1
O X S U -F 5151
O X S U -F 516 1
17.9 – 23.4
21.9 – 32.6
27.4 – 37.8
35.1 – 4 6 .9
4 9 .4 – 56 .0
Te rm inatio n w ith m e c ha nic a l lug B L MT
S c re e ne d sing le co re pla stic a nd rubbe r c a ble
Cross section
(mm 2 )
25 – 9 5
9 5 – 24 0
120 – 30 0
18 5 – 4 0 0
MEDIUM VOLTAGE CABLE ACCESSORIES
50 0 – 6 30
10
24 k V
Kit number
Indoor
Kit number
Outdoor
IX S U -F 5121-ML-1-13
IX S U -F 5121-ML-1-17
IX S U -F 5131-ML-4 -13
IX S U -F 5131-ML-4 -17
IX S U -F 5131-ML-5-13
IX S U -F 5131-ML-5-17
IX S U -F 514 1-ML-6 -13
IX S U -F 514 1-ML-6 -17
IX S U -F 514 1-ML-6 -21
IX S U -F 5151-ML-7-17
IX S U -F 5151-ML-7-21
O X S U -F 5121-ML-1-13
O X S U -F 5121-ML-1-17
O X S U -F 5131-ML-4 -13
O X S U -F 5131-ML-4 -17
O X S U -F 5131-ML-5-13
O X S U -F 5131-ML-5-17
O X S U -F 514 1-ML-6 -13
O X S U -F 514 1-ML-6 -17
O X S U -F 514 1-ML-6 -21
O X S U -F 5151-ML-7-17
O X S U -F 5151-ML-7-21
Diameter over insulation
HD 620 A2 (mm)
17.9 – 25.0
23.0 – 32.6
24 .3 – 34 .6
27.4 – 37.8
37.9 – 4 4 .0
Te rm inatio n fo r c rim p lug
S c re e ne d 3-co re pla stic a nd rubbe r c a ble w itho ut a rm o ur
Cross section
(mm 2 )
10 – 25
25 – 50
70 – 18 5
18 5 – 4 0 0
Tail Length
(mm)
Kit number
Indoor
Kit number
Outdoor
4 50
120 0
4 50
120 0
4 50
120 0
4 50
120 0
IX S U -F 5311
IX S U -F 5314
IX S U -F 5321
IX S U -F 5324
IX S U -F 5331
IX S U -F 5334
IX S U -F 534 1
IX S U -F 534 4
O X S U -F 5311
O X S U -F 5314
O X S U -F 5321
O X S U -F 5324
O X S U -F 5331
O X S U -F 5334
O X S U -F 534 1
O X S U -F 534 4
Te rm inatio n w ith m e c ha nic a l lug B L MT
S c re e ne d 3-co re pla stic a nd rubbe r c a ble w itho ut a rm o ur
Cross-section
(mm 2 )
Tail Length
(mm)
4 50
25 – 50
120 0
4 50
9 5 – 18 5
120 0
4 50
18 5 – 4 0 0
120 0
Kit number
Indoor
Kit number
Outdoor
IX S U -F 5321-ML-1-13
IX S U -F 5321-ML-1-17
IX S U -F 5324 -ML-1-13
IX S U -F 5324 -ML-1-17
IX S U -F 5331-ML-4 -13
IX S U -F 5331-ML-4 -17
IX S U -F 5334 -ML-4 -13
IX S U -F 5334 -ML-4 -17
IX S U -F 534 1-ML-6 -13
IX S U -F 534 1-ML-6 -17
IX S U -F 534 1-ML-6 -21
IX S U -F 534 4 -ML-6 -13
IX S U -F 534 4 -ML-6 -17
IX S U -F 534 4 -ML-6 -21
O X S U -F 5321-ML-1-13
O X S U -F 5321-ML-1-17
O X S U -F 5324 -ML-1-13
O X S U -F 5324 -ML-1-17
O X S U -F 5331-ML-4 -13
O X S U -F 5331-ML-4 -17
O X S U -F 5334 -ML-4 -13
O X S U -F 5334 -ML-4 -17
O X S U -F 534 1-ML-6 -13
O X S U -F 534 1-ML-6 -17
O X S U -F 534 1-ML-6 -21
O X S U -F 534 4 -ML-6 -13
O X S U -F 534 4 -ML-6 -17
O X S U -F 534 4 -ML-6 -21
Duyen Ha Power Equipment Co.,Ltd
Medium Voltage Heat-Shrinkable Joints
EPKJ
Joints for screened plastic and rubber insulated cables up
to 36 kV
General Description
Raychem EPKJ series of heat shrinkable joints is based on well established, highly
reliable, radiation cross linked polymeric tubes which are easy to install, eliminates shelf
life limitations even in severe climates and permits immediate back filling of trenches and
quick energization.
Features & Benefits
Selection Information: dimensions shown in millimeters
3-Core
Polymeric Cable
(Unarmoured)
EPKJ-R
Inline Joints
Size of Conductor in [mm2 ]
Connector
Dia. max.
[mm]
Connector
Length max.
[mm]
Kit Number
Unarmoured
35-70
22
110
EPKJ-17A/3XU-3XU
95-185
29
140
EPKJ-17B/3XU-3XU
240-400
42
180
EPKJ-17C/3XU-3XU
12 kV
24 kV
500-630
36 kV
52
200
EPKJ-17D/3XU-3XU
25
20
110
EPKJ-24A/3XU-3XU
35-70
25
140
EPKJ-24B/3XU-3XU
95-240
36
160
EPKJ-24C/3XU-3XU
300-400
44
200
EPKJ-24D/3XU-3XU
Duyen Ha Power Equipment Co.,Ltd
MEDIUM VOLTAGE CABLE ACCESSORIES
• Polymeric/elastomeric triple extruded, conducting/insulating joint body ensures higher
recovery force and fewer components, improving reliability and simplifying installation.
• Insulating, screening and electric field control derived from specially formulated, crosslinked polymeric materials with precisely defined electrical characteristics.
• Factory engineered components ensure consistent installations with pre-determined
insulation thickness, eliminating installer errors.
• No penciling of insulation required, reducing installation time.
• Shrinking process drives out moisture / condensation in the jointing area, ensuring no
moisture entrapment within the joint.
• Special low viscosity void filler flows and uniformly envelops the connector, creating a
smooth profile.
• Wide use range of kits ensures fewer kits to cover a range of conductor sizes, reducing
inventory.
11
3-Core
Polymeric Cable
(Tape Armour)
EPKJ-R
Inline Joints
Size of Conductor in [mm2 ]
12 kV
24 kV
36 kV
Kit Number
Tape Armour
35-70
E P K J -17A / 3X U -3X U -T
9 5-18 5
E P K J -17B / 3X U -3X U -T
24 0 -4 0 0
E P K J -17C / 3X U -3X U -T
25
E P K J -24 A / 3X U -3X U -T
35-70
E P K J -24 B / 3X U -3X U -T
9 5-24 0
E P K J -24 C / 3X U -3X U -T
30 0 -4 0 0
E P K J -24 D/ 3X U -3X U -T
EPKJ-R
Inline Joints
Single Core
Polymeric Cable
Size of Conductor in [mm2 ]
12 kV
24 kV
36 kV
35-70
E P K J -17A / 1X U -1X U
9 5-18 5
E P K J -17B / 1X U -1X U
24 0 -4 0 0
E P K J -17C / 1X U -1X U
MEDIUM VOLTAGE CABLE ACCESSORIES
50 0 -6 30
12
Kit Number
unarmoured
E P K J -17D/ 1X U -1X U
25
E P K J -24 A / 1X U -1X U
35-70
E P K J -24 B / 1X U -1X U
9 5-24 0
E P K J -24 C / 1X U -1X U
30 0 -4 0 0
E P K J -24 D/ 1X U -1X U
50 -70
E P K J -36 A / 1X U -1X U
9 5-150
E P K J -36 B / 1X U -1X U
18 5-4 0 0
E P K J -36 C / 1X U -1X U
50 0 -6 30
E P K J -36 D/ 1X U -1X U
Duyen Ha Power Equipment Co.,Ltd
Heat-Shrink Joints
MXSU/MXST/MXSW/MXAW
Jointing system up to 36 kV complete with
mechanical connectors
General Description
Raychem MXSU/MXST/MXSW/MXAW series of heat shrinkable cable joints have been
specifically designed for use with mechanical connectors. The inclusion of range taking
connectors ensures the kits can be supplied complete, with connectors that cover the
use range of the kits.
MXSU/MXST/MXSW/MXAW kits exceed international performance standards including
CENELEC HD 629 and IEC 60502-4. Tested for 800 hours of heat cycling at a conductor
temperature of 130˚C @ 2.5U0 .
Features & Benefits
Selection Information: dimensions shown in millimeters
Inline joint for 3 core poly cables with copper wire shield, without armour
Mechanical
Connectors included
MXSU-3311
MXSU-3321
MXSU-3331
MXSU-3332
MXSU-5311
MXSU-5321
MXSU-5331
MXSU-5332
12 kV
24 kV
25-95
70-150
95-240
150-300
25-95
50-150
95-240
150-300
Diameter
Conductor
Diameter over
Core insulation
Diameter
Cable Over sheath
5.2-12.0mm
8.7-15.0mm
10.3-19.2mm
12.9-21.6mm
5.2-12.0mm
7.2-15.0mm
10.3-19.2mm
12.9-21.6mm
13.2-21.8mm
17.6-24.3mm
18.5-29.4mm
21.6-31.4mm
17.9-26.0mm
20.2-29.5mm
23.0-33.6mm
25.0-35.5mm
40-61mm
45-68mm
53-77mm
59-85mm
48-72mm
55-80mm
62-89mm
70-96mm
Diameter
Conductor
Diameter over
Core insulation
Diameter
Cable Over sheath
10.3-19.2mm
12.9-21.6mm
10.3-19.2mm
12.9-21.6mm
17.6-29.4mm
22.0-31.4mm
23.0-33.6mm
25.0-35.5mm
60-80mm
64-85mm
70-90mm
76-95mm
Diameter
Conductor
Diameter over
Core insulation
Diameter
Cable Over sheath
10.3-19.2mm
12.9-21.6mm
10.3-19.2mm
12.9-21.6mm
17.6-29.4mm
22.0-31.4mm
23.0-33.6mm
25.0-35.5mm
60-80mm
64-85mm
70-90mm
76-95mm
Inline joint for 3 core poly cables with copper wire shield, and steel tape armour
Mechanical
Connectors included
MXST-3331
MXST-3332
MXST-5331
MXST-5332
12 kV
24 kV
95-240
150-300
95-240
150-300
Inline joint for 3 core poly cables with copper tape shield and steel wire armour
Mechanical
Connectors included
MXSW-3331
MXSW-3332
MXSW-5331
MXSW-5332
12 kV
24 kV
95-240
150-300
95-240
150-300
MEDIUM VOLTAGE CABLE ACCESSORIES
• Polymeric/elastomeric triple extruded, conducting/insulating joint body ensures higher
recovery force and fewer components, improving reliability and simplifying installation.
• Range taking capability of mechanical connectors makes it possible to include a single
connector that covers the use range of the kit.
• Mechanical connectors eliminate the need for a crimping tool.
• Shear head bolts, with a pre-set shear torque, ensure consistent contact pressure.
Specially designed contact surface at the bolt tip breaks up the conductor oxide layer
resulting in an excellent electrical contact and improved tensile strength. Eliminates
jointer errors.
• Tin plated mechanical connectors with corrosion inhibiting compound facilitates
installation on aluminium or copper conductors.
• Can withstand sheath testing for 15 minutes at 15kV DC and 8kV AC.
• Range taking kits with unlimited shelf life.
Note: For any other cable construction, please contact your local sales representative
Duyen Ha Power Equipment Co.,Ltd
13
Inline joint for 1 core poly cables with copper wire shield without armour
Mechanical
Connectors
included
MXSU-3111
MXSU-3121
MXSU-3131
MXSU-3132
MXSU-3141
MXSU-3151
MXSU-3161
MXSU-3171
MXSU-3181
MXSU-5101
MXSU-5111
MXSU-5121
MXSU-5131
MXSU-5132
MXSU-5141
MXSU-5151
MXSU-5161
MXSU-5171
MXSU-5181
MXSU-6111
MXSU-6121
MXSU-6131
MXSU-6141
MXSU-6151
MXSU-6161
MXSU-6171
MXS U-61 81
12 kV
24 kV
36 kV
25-95
70-150
95-240
150-300
240-400
500
630
800
1000
10-35
25-95
50-150
95-240
150-300
240-400
500
630
80 0
1000
35-95
70-150
150-300
240-400
500
630
800
1000
Diameter
Conductor
5.2-12.0 mm
8.7-15.0 mm
10.3-19.2 mm
12.9-21.6 mm
17.8-24.6 mm
25.5-27.6 mm
29.0-32.5 mm
32.0-33.8 mm
38.5-39.2 mm
3.7-7.5 mm
5.2-12.0 mm
7.2-15.0 mm
10.3-19.2 mm
12.9-21.6 mm
17.8-24.6 mm
25.5-27.6 mm
29.0-32.5 mm
32.0-33.8 mm
38.5-39.2 mm
6.0-12.0 mm
8.7-15.0 mm
13.9-21.6 mm
17.8-24.6 mm
25.5-29.2 mm
29.0-32.5 mm
32.0-33.8 mm
38.5-39.2 mm
Diameter over
Core insulation
13.2-21.8 mm
17.6-24.3 mm
17.6-29.4 mm
21.6-30.4 mm
25.7-32.6 mm
33.8-37.2 mm
37.5-40.0 mm
39.5-42.6 mm
4 5.0-47.6 mm
15.0-22.0 mm
17.9-26.0 mm
20.2-29.5 mm
23.0-33.6 mm
25.0-35.5 mm
29.9-38.8 mm
37.2-41.6 mm
39.2-44.7 mm
44.8-46.9 mm
49.4-53.2 mm
24.0-30.0 mm
26.2-34.5 mm
31.1-39.6 mm
36.2-42.8 mm
40.1-46.6 mm
45.8-50.5 mm
50.1-53.4 mm
55.7-58.8 mm
Diameter
Cable Over sheath
23-32 mm
25-38 mm
26-40 mm
29-43 mm
33-47 mm
44-50 mm
47-54 mm
52-57 mm
59-64 mm
17-33 mm
25-38 mm
28-38 mm
30-43 mm
33-48 mm
35-49 mm
48-54 mm
50-58 mm
58-61 mm
64-67 mm
32-43 mm
34-44 mm
38-53 mm
40-54 mm
52-60 mm
55-68 mm
62-66 mm
69-73 mm
MEDIUM VOLTAGE CABLE ACCESSORIES
Note: For armoured and tape shield cables, please contact your local sales representative
14
Inline joint for 1 core poly cables with copper wire or tape shield with aluminium wire armour
Mechanical Connectors
included
24 kV
Diameter
Conductor
Diameter over
Core insulation
Diameter
Cable Over sheath
MXAW-5131
MXAW-5132
MXAW-5141
MXAW-5151
MXAW-5161
95-185
150-300
240-400
500
630
10.3-17.6 mm
12.9-21.6 mm
17.8-24.6 mm
25.5-27.6 mm
29.0-32.5 mm
23.0-31.2 mm
25.8-34.6 mm
29.4-38.8 mm
37.2-41.6 mm
39.2-44.7 mm
37-43 mm
40-48 mm
44-54 mm
48-56 mm
50-60 mm
Note: For cable constructions or voltages not listed, please contact your local sales representative
Duyen Ha Power Equipment Co.,Ltd
Heat-Shrink Joints
SXSU/SXST/SXSW/SXAW
Joints for polymeric insulated cables from 12 kV up to 36 kV
General Description
Raychem SXSU/SXST/SXSW/SXAW series of heat shrinkable joints is based on well
established, highly reliable, radiation cross linked polymeric tubes which are easy to
install, eliminates shelf life limitations even in severe climates and permits immediate
back filling of trenches and quick energization.
With millions of installations throughout the world, Raychem SXSU cable joints for up
to 36 kV are acknowledged to be more reliable and quicker to install than conventional
systems.
S XSU kits exceed International performance standards including CENELEC HD 629 and
IEC 60502-4.
Features & Benefits
Selection Information: dimensions shown in millimeters
Inline joint for 1-core polymeric cables with copper wire shield, without armour
Kit Number
12kV
SXSU-3111
SXSU-3121
SXSU-3131
SXSU-3141
SXSU-4111
SXSU-4121
SXSU-4131
SXSU-4141
SX SU-41 51
SXSU-5121
SXSU-5131
SXSU-5141
SXSU-5151
SXSU-5161
SXSU-6121
SXSU-6131
SXSU-6141
SXSU-6151
SXSU-6161
SXSU-6122
SXSU-6132
SXSU-6142
SXSU-6152
35-70
95-185
185-300
300-500
50-70
95-185
185-300
400-630
800-1200
24kV
36kV
25-95
95-240
240-500
630-800
1000-1200
35-95
95-150
185-4 00
500-800
800-1200
35-150
150-300
400-630
800-1200
Diameter over
Core insulation
15,4-20,2 mm
17,6-26,9 mm
22,0-31,4 mm
28,4-38,8 mm
15,4-20,2 mm
17,6-26,9 mm
23,2-31,4 mm
29,8-42,5 mm
39,4-50,0 mm
17,6-26,0 mm
23,2-33,6 mm
29,8-41,6 mm
39,4-48,0 mm
49,4-56,2 mm
24,0-31,4 mm
26,4-34,4 mm
3 1,9-43,7 mm
42,9-53,4 mm
46,2-61,5 mm
24,0-34,4 mm
30,8-40,5 mm
40,1-50,5 mm
45,6-61,5 mm
Diameter
Cable oversheath
23-29 mm
25-37 mm
29-43 mm
36-52 mm
23-29 mm
25-37 mm
29-43 mm
40-52 mm
48-66 mm
25-37 mm
28-44 mm
33-52 mm
48-66 mm
55-75 mm
32-41 mm
35-46 mm
40-54 mm
55-66 mm
55-73 mm
33-44 mm
36-52 mm
40-62 mm
55-76 mm
Connector dimensions max.
diameter/max.length
23 mm/ 110 mm
29 mm/ 160 mm
34 mm/ 180 mm
44 mm/ 220 mm
22 mm/ 110 mm
29 mm/ 160 mm
36 mm/ 180 mm
52 mm/ 250 mm
62mm/ 280 mm
23 mm/ 120 mm
34 mm/ 140 mm
44 mm/ 230 mm
58 mm/ 250 mm
62 mm/ 280 mm
22 mm/ 140 mm
29 mm/ 160 mm
42 mm/ 220 mm
58 mm/ 250 mm
62 mm/ 280 mm
29 mm/ 160 mm
38 mm/ 160 mm
52 mm/ 250 mm
62 mm/ 280 mm
MEDIUM VOLTAGE CABLE ACCESSORIES
• Polymeric/elastomeric triple extruded, conducting/insulating joint body ensures higher
recovery force and fewer components, improving reliability and simplifying installation.
• Insulating, screening and electric field control derived from specially formulated,
crosslinked polymeric materials with precisely defined electrical characteristics.
• F actory engineered components ensure consistent installations with pre-determined
insulation thickness, eliminating installer errors.
• No penciling of insulation required, reducing installation time.
• Shrinking pr ocess drives out moisture / condensation in the jointing area, ensuring no
moisture entrapment within the joint.
• Wide use range of kits ensures fewer kits to cover a range of conductor sizes, reducing
inventory.
• Special low viscosity void filler flows and uniformly envelops the connector, creating a
smooth profile.
• Unlimit ed shelf life allows stocking of economic quantities without product spoilage.
• Enhanced range-taking ability means that one kit fits more conductor sizes,reducing
stocking requirements.
Note: For copper tape shield or armoured cables, please contact your local sales representative.
Duyen Ha Power Equipment Co.,Ltd
15
Inline joint for 3-core polymeric cables with copper wire shield, without armour
Kit Number
12kV
SXSU-3311
SXSU-3321
SXSU-3331
SXSU-4302
SXSU-4312
SXSU-4322
SXSU-4332
SXSU-5322
SXSU-5 332
SXSU-5342
35-70
95-185
185-300
16-35
50-70
95-185
185-300
24kV
Diameter over
Core insulation
36kV
15,4-20,2 mm
17,6-26,9 mm
22,0-31,4 mm
13,2-17,3 mm
15,4-20,2 mm
17,6-26,9 mm
23,2-31,4 mm
17,6-26,0 mm
23,2-33,6 mm
29,8-41,6 mm
25-95
95 -240
240-500
Diameter
Cable oversheath
40-57 mm
53-73 mm
63-82 mm
38-49 mm
46-57 mm
53-73 mm
63-82 mm
48-72 mm
62-89 mm
78-100 mm
Connector dimensions max.
diameter/max.length
23 mm/ 110 mm
29 mm/ 160 mm
34 mm/ 180 mm
17 mm/ 100 mm
22 mm/ 110 mm
29 mm/ 160 mm
36 mm/ 180 mm
23 mm/ 120 mm
34 mm/ 140 mm
44 mm/ 230 mm
Note: For copper tape shield or armoured cables, please contact your local sales representative.
Inline joint for 3-core polymeric cables with copper wire shield and steel tape armour
Kit Number
12kV
Diameter over
Core insulation
SXST-4303
SXST-4313
SXST-4323
SXST-4333
16-35
50-70
95-185
185-300
13,2-17,3 mm
15,4-20,2 mm
17,6-26,9 mm
23,2-31,4 mm
Diameter
Cable oversheath
38-52 mm
48-57 mm
56-73 mm
68-84 mm
Connector dimensions max.
diameter/max.length
17 mm/ 100 mm
22 mm/ 110 mm
29 mm/ 160 mm
36 mm/ 180 mm
Note: For tape shield cables, please contact your local sales representative.
MEDIUM VOLTAGE CABLE ACCESSORIES
Inline joint for 3-core polymeric cables with copper wire shield and steel wire armour
16
Kit Number
12kV
Diameter over
Core insulation
SXSW-4304
SXSW-4314
SXSW-4324
SXSW-4334
16-35
50-70
95-185
185-300
13,2-17,3 mm
15,4-20,2 mm
17,6-26,9 mm
23,2-31,4 mm
Diameter
Cable oversheath
38-54 mm
48-60 mm
56-75 mm
68-86 mm
Connector dimensions max.
diameter/max.length
17 mm/ 100 mm
22 mm/ 110 mm
29 mm/ 160 mm
36 mm/ 180 mm
Note: For copper tape shield cables, please contact your local sales representative.
Inline joint for 1-core polymeric cables with aluminium wire armour
Kit Number
12kV
SXAW-3121
SXAW-3131
SXAW-3141
SXAW-3151
SXAW-5121
SXAW-5131
SXAW-5141
SXAW-5151
SXAW- 6122
SXAW-6132
SXAW-6142
95-185
185-300
400-500
630-800
24kV
Diameter over
Core insulation
36kV
50-95
120-185
240-400
500-630
50-95
120-240
300-630
17,6-26,9 mm
22,0-31,4 mm
28,4-38,8 mm
39,4-45,5 mm
17,6-26,0 mm
23,2-33,6 mm
29,8-38,8 mm
39,4-45,0 mm
24,0-31,4 mm
30,8-40,5 mm
40,1-50,5 mm
Diameter
Cable oversheath
28-39 mm
33-45 mm
40-52 mm
53-59 mm
28-39 mm
33-44 mm
40-54 mm
54-64 mm
33-44 mm
44-54 mm
54-68 mm
Connector dimensions max.
diameter/max.length
28,5 mm/ 140 mm
34 mm/ 180 mm
44 mm/ 220 mm
58 mm/ 250 mm
23 mm/ 120 mm
28,5 mm/ 140 mm
38,5 mm/ 220 mm
52 mm/ 250 mm
23 mm/ 120 mm
32 mm/ 160 mm
52 mm/ 250 mm
Note: For tape shield cables, please contact your local sales representative.
Duyen Ha Power Equipment Co.,Ltd
Bushing boot
RICS insulated adapter termination system for SF6-insulated
switchgear up to 24 kV
General Description
This insulated adapter provides perfect sealing, electrical insulation and an electrical
connection between all Raychem terminations and SF6-insulated switchgear up to 24 kV.
It is designed to fit bushing profiles according to EN 50181 type C.
Raychem elastomeric RICS adapters are moulded parts which fit over the connection
between the cable lug and the right-angled bushing of a gas insulated switchgear,
where the air clearances are insufficient for normal operation. The non-tracking
elastomeric housing has excellent track and erosion resistance, dielectric properties
and environmental resistance, giving superb performance in areas of high humidity and
electrical stress.
Features & Benefits
S e le c tio n Info rm atio n: d im e nsio ns show n in m illim e te rs
R IC S -3133 T-A d a pte r up to 12 k V
The insulating body, fixing bolts, terminal stud and cap are supplied in a 3-phase set
complete with installation instruction. Cable terminations with lugs for M16 studs have
to be ordered separately. Covers a wide cross section range of 70~300 sqmm.
Tested according to CENELEC HD 629.1 S2:2006 , including tests like AC, DC (60 kV),
BIL(95 kV), long-term loadcycling at AC voltage 16 kV phase-ground (2.5 Uo).
Cross section
(sqmm)
Ordering description
T-Adapter
Termination for polymeric cables
incl. Mechanical lugs
70 ~ 150
9 5 ~ 24 0
120 ~ 30 0
R IC S -3133
R IC S -3133
R IC S -3133
IX S U -F 3131-ML-2-17
IX S U -F 3131-ML-4 -17
IX S U -F 3131-ML-5-17
Duyen Ha Power Equipment Co.,Ltd
MEDIUM VOLTAGE CABLE ACCESSORIES
• Quick and easy to install. Works in combination with all Raychem termination product
lines.
• Can easily be removed and reinstalled without the need for additional material or
tooling, allowing access to the bushing connection for test purposes.
• The compact design of the adapters and their clear cut profiles simplify installation.
The electrical connection with the aid of a stud renders additional fastening systems
unnecessary.
• The adapters are water-tight and guarantee uninterrupted operation, even under
extreme environmental conditions with severe pollution.
• Caters for a wide range of cables with as few fittings as possible, while optimising the
product line for specific applications, thereby maximising reliability.
• The adapters conform to CENELEC HD 629.1 S2:2006, IEC 540, VDE 0278 and ANSI
IEEE 386 specifications.
17
R IC S T-a d a pte r w ith o r w itho ut surg e a rre ste r up to 24 k V
Thick walled insulator made of high quality elastomer with sealing face over the termination, bushing cone and plug.
The electrical connection is made with a terminal stud and the cable lug of the termination. Two cable connection is
possible. A special plug which allows cable testing without disconnecting the adapter is also offered. The design of the
adapter for connecting the surge arrester is basically identical. The elastomer insulator has an additional lead-in duct for the
surge arrester.
MEDIUM VOLTAGE CABLE ACCESSORIES
Scope of supply (for three phases)
Insulator, plug, terminal stud, small accessories and installation instructions.
18
T-adapter for
perpendic ular
connec tion of
the term ination
to S F 6 -insulated
sw itc hgear
T-adapter fitted
w ith testing plug
T-adapter for
perpendic ular
connec tion of
term ination and
surge arrester
to S F 6 -insulated
sw itc hgear
S traight adapter for
vertic al connec tion
of the term ination
to S F 6 -insulated
sw itc hgear
R IC S S tra ig ht a d a pte r up to 24 k V
A thick walled, heat-shrinkable insulating sleeve provides a hermetic seal over the
cone of the bushing and the termination. The adapter area is smoothed with a
meltable filler strip.
Scope of supply (for three phases)
Heat-shrinkable insulating sleeving, filler strip, small accessories and installation
instructions. Terminal stud and lug must be enclosed.
R e late d te st re po rt
Reference No.
Voltage (kV)
Specification
P P R -250 5
P P R -250 9
P P R -110 6
12
12
24
HD 6 29 .1 S 2:20 0 6
HD 6 29 .1 S 2:20 0 6 / G O S T 1378 .0 -8 6
IE C 54 0 , V D E 0 278 and A N S I IE E E 38 6
Duyen Ha Power Equipment Co.,Ltd
Bushing boot
RSRB
Heat shrinkable insulating bushing boots up to 36 kV
General Description
RSRB polymeric insulating boots are moulded parts which fit over the connection
between the cable lug and equipment bushing to improve phase-to-phase and phaseto-ground insulation. They are used in switchgear and transformer cable boxes where air
clearances are insufficient for normal operation, or to protect against flashover due to
rodents or high humidity.
The non-tracking polymeric housing has excellent erosion resistance, dielectric
properties and environmental resistance, giving superb performance in areas of high
humidity and electrical stress. The boot is coated internally with a hot melt adhesive to
provide an excellent seal and improve electrical performance.
RSRB boots work in combination with all Raychem heat shrink termination products.
RSRB boots are quick and easy to install and do not require any taping of the bushing or
the termination for voltages upto 24 kV. The boot can be easily removed, allowing access
to the bushing connection for test purposes.
•
•
•
•
•
•
•
•
Simple and easy installation
Requires standard gas torch installation
High-performance insulation material
Excellent track and erosion resistance
Removable for access to bushing connection
Available for in-line and right angled configurations
Unlimited shelf life
Connection can be energised immediately after installation.
S e le c tio n Info rm atio n: d im e nsio ns show n in m illim e te rs
11 k V B ushing B o o ts H e at-S hrink a ble
Part Number
In-Line
Part Number
Right Angle
Conductor Size
Range
Paper (sqmm)
Conductor Size Range
XLPE (sqmm)
R S R B 4 0 22
R S R B 4 0 24
R S R B 4 0 26
RSRB 40 42
RSRB 40 44
RSRB 40 46
16 ~35
50 ~9 5
120 ~30 0
16 ~9 5
120 ~30 0
Sold as set of three
2 2 k V R ig ht A ng le B ushing B o o ts H e at-S hrink a ble
Part Number
Conductor Size
Range (sqmm)
R S R B 50 4 4
R S R B 50 4 6
25~9 5
9 5~30 0
MEDIUM VOLTAGE CABLE ACCESSORIES
Features & Benefits
Sold as set of three
Duyen Ha Power Equipment Co.,Ltd
19
33 k V R ig ht A ng le B ushing B o o ts He at-S hrink a ble
Part Number
Conductor Size
Range (sqmm)
R SR B 60 46
120 ~30 0
Sold as set of three
R e late d te st re po rt
Voltage (kV)
P P R -0 6 20
P P R -0 6 21
P P R -0 6 9 1
P P R -10 8 9
17.5
17.5
36
24
MEDIUM VOLTAGE CABLE ACCESSORIES
Reference No.
20
Duyen Ha Power Equipment Co.,Ltd
Cold-Applied Joints
CSJT
Silicone cold-shrink joint with integrated stress control
for XLPE cables up to 36 kV
General Description
Raychem CSJT Series of cold shrink joint offers a reliable, fast and easy to install jointing
system is maintain a highly reliable network. A silicone rubber joint body with integrated
geometrical stress cone and faraday cage provides excellent electrical stress control.
CSJT kit are designed to cover a wide range of applications covering all available types
of armouring and cable screens standand kit are supplied with a resin injected rejacketing system.
Alternate heat shrink and cold shrink re-jacketing system is available upon required.
Features & Benefits
S e le c tio n Info rm atio n: d im e nsio ns show n in m illim e te rs
12 k V 3 -C o re c a ble
Cross-section (mm2 )
Kit description
Diameter over insulation(mm)
Comment
50 ~70
9 5~18 5
24 0 ~30 0
C S J T-12-50 70 -T
C S J T-12-9 518 -T
C S J T-12-24 30 -T
16 ~21
21~26
26 ~32
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
Cross-section (mm2 )
Kit description
Diameter over insulation(mm)
Comment
50 ~70
9 5~18 5
24 0 ~30 0
400
50 0
C S J T-12-50 70 -T-S C
C S J T-12-9 518 -T-S C
C S J T-12-24 30 -T-S C
C S J T-12-4 0 0 -T-S C
C S J T-12-50 0 -T-S C
16 ~21
21~26
26 ~32
27~35
33~4 0
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
Cross-section (mm2 )
Kit description
Diameter over insulation(mm)
Comment
70 ~120
150 ~24 0
30 0
C S J T-24 -70 12-T
C S J T-24 -1524 -T
C S J T-24 -30 0 -T
21~26
26 ~32
27~35
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
Cross-section (mm2 )
Kit description
Diameter over insulation(mm)
Comment
70 ~120
150 ~24 0
30 0
400
C S J T-24 -70 12-T-S C
C S J T-24 -1524 -T-S C
C S J T-24 -30 0 -T-S C
C S J T-24 -4 0 0 -T-S C
21~26
26 ~32
27~35
33~4 0
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
12 k V 1-C o re c a ble
24 k V 3 -C o re c a ble
24 k V 1-C o re c a ble
MEDIUM VOLTAGE CABLE ACCESSORIES
• Pre-expanded, single piece silicone rubber joint body with high mechanical expansion
capability allows a wide application range
• Electrical stress control of the screen cut area by integrated conductive geometrical
stress cones
• Electrical stress control of the connector area by an integrated screened connection
area (Faraday cage)
• Proven shield continuity concept
• The tape and resin outer sealing and protection system provides a reliable moisture
seal, corrosion prevention and effective impact resistance
• CSJT joints can be supplied with compression connectors or Raychem mechanical
BSM connectors
• CSJT joints can be modified for different armour types and/or wire shield cables.
• CSJT joints can be applied with alternate rejacketing system
• Pre-expansion on a easy-to-install spiral holdout system
• CENELEC HD 629.1, requirements which include IEC and IEC60
The application range given in the table is based on polymeric insulated cable according to IEC 60502 standard with
stranded circular conductors.
Due to different conductor sharp or dimensions and cable constructions the minimum and maximum application range may
be extendable. Please contact your local sales representative.
Duyen Ha Power Equipment Co.,Ltd
21
Cold-Applied Terminations
CSTI/CSTO
Silicone cold-shrink termination with integrated stress
control for XLPE cables up to 24 kV
General Description
The Raychem CSTI/CSTO family of cold shrink terminations is made from a high
performance, liquid silicone material. Specially formulated for excellent track and split
resistance, the terminations deliver long and trouble free service. The extra long, silicone
stress cone is integrated with the termination and eliminates positioning issues common
with normal cold shrink terminations. Moisture sealing at the lug is integrated into the
termination body, eliminating the need for additional sealing tapes. Easy release sprial
hold out ensures one-step installation
Main technical parameters
Cable insulation outer diameter
11.7-52 mm
Cabje conductor cross-section range
25-630 mm
Max system voltage
17.5 kv
Impulse voltage withstand
95 kv
Partial discharge @1.73UO
<3 pc
AC voltage withstand .5 min
39 kv
DC voltage withstand .15 min
35 kv
2
MEDIUM VOLTAGE CABLE ACCESSORIES
Features & Benefits
22
•
•
•
•
•
•
•
•
•
One piece, pre-expanded termination on a spiral hold out for easy installation
Integrated stress cone and faraday cage for excellent electrical stress control
Longer stress cone eliminated installer positioning error
Integrated lug seal with pre-installed sealant for a Class 1 termination
Suitable for use with crimp or mechanical connectors
Excellent electrical properties with superior track resistance
Outstanding weathering and UV resistance for a long service life
Minimum 24 months shelf life
Tested to IEC 60502-4
S e le c tio n Info rm atio n: d im e nsio ns show n in m illim e te rs
12 k V 3-C o re c a ble
Cross-section (mm2 )
Indoor termination
Kit description
Diameter over insulation(mm)
Comment
25-35
50 -120
150 -18 5
24 0 -4 0 0
50 0
C S T I-12-2535-T
C S T I-12-50 12-T
C S T I-12-1518 -T
C S T I-12-24 4 0 -T
C S T I-12-50 0 -T
11.7~18
16 .5~27
16 .5~27
24 .5~34 .5
32.5~52
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
C S TO -12-2535-T
C S TO -12-50 12-T
C S TO -12-1518 -T
C S TO -12-24 4 0 -T
C S TO -12-50 0 -T
11.7~18
16 .5~27
16 .5~27
24 .5~34 .5
32.5~52
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
Outdoor termination
25-35
50 -120
150 -18 5
24 0 -4 0 0
50 0
Duyen Ha Power Equipment Co.,Ltd
12 k V 1-C o re c a ble
Cross-section (mm2 )
Indoor termination
Kit description
Diameter over insulation(mm)
Comment
50 -150
18 5-4 0 0
50 0 -6 30
C S T I-12-50 15-S C -T
C S T I-12-18 4 0 -S C -T
C S T I-12-50 6 3-S C -T
16 .5~27
24 .5~34 .5
32.5~52
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
C S TO -12-50 15-S C -T
C S TO -12-18 4 0 -S C -T
C S TO -12-50 6 3-S C -T
16 .5~27
24 .5~34 .5
32.5~52
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
Cross-section (mm2 )
Indoor termination
Kit description
Diameter over insulation(mm)
Comment
35-9 5
120 -18 5
24 0 -30 0
C S T I-24 -359 5-T
C S T I-24 -1218 -T
C S T I-24 -24 30 -T
16 .5~27
24 .5~34 .5
24 .5~34 .5
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
C S TO -24 -359 5-T
C S TO -24 -1218 -T
C S TO -24 -24 30 -T
16 .5~27
24 .5~34 .5
24 .5~34 .5
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
Cross-section (mm2 )
Indoor termination
Kit description
Diameter over insulation(mm)
Comment
35-9 5
120 -30 0
4 0 0 -50 0
C S T I-24 -359 5-S C -T
C S T I-24 -1230 -S C -T
C S T I-24 -4 0 50 -S C -T
16 .5~27
24 .5~34 .5
32.5~52
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
C S TO -24 -359 5-S C -T
C S TO -24 -1230 -S C -T
C S TO -24 -4 0 50 -S C -T
16 .5~27
24 .5~34 .5
32.5~52
Tape shielded, unarm oured
Tape shielded, unarm oured
Tape shielded, unarm oured
Outdoor termination
50 -150
18 5-4 0 0
50 0 -6 30
24 k V 3 -C o re c a ble
Outdoor termination
24 k V 1-C o re c a ble
Outdoor termination
35-9 5
120 -30 0
4 0 0 -50 0
The application range given in the table is based on polymeric insulated cable according to IEC 60502 standard with
stranded circular conductors.
Due to different conductor sharp or dimensions and cable constructions the minimum and maximum application range may
be extendable. Please contact your local sales representative.
Duyen Ha Power Equipment Co.,Ltd
MEDIUM VOLTAGE CABLE ACCESSORIES
35-9 5
120 -18 5
24 0 -30 0
23
Elbows & Accessories
ELBC
810 screened separable connector up to 17.5 kV 800 A
General Description
Raychem ELBC-810 screened separable connectors are used to connect XLPE cables to
electrical equipment (e.g. RMU, switchgear, transformer, etc.) using CENELEC bushings
type “C” specified for 630/1250 A up to 17.5 kV. Made of a highly modified EPDM
rubber, ELBC is fully screened and fully submersible, suitable for indoor and outdoor
installations. For a wide application range, the design incorporates one body and five
stress cones to cover all cross-sections, from 25 sq. mm to 500 sq. mm. The overall
and cut-back dimensions are designed to take up minimum space in the terminal box.
ELBC 810 elbow connectors are equipped with a capacitive test point for determining
whether the circuit is energised. This test point is protected by a conductive cap. ELBC
is compatible for use with both mechanical and compression lugs which can be ordered
separately. Pre-engineered design of the mechanical lug optimizes the contact resistance
between the connector and conductor. Installation is very easy, requiring only a standard
socket spanner and no additional space. The separable connector is easily connected
with the bushing and junction that comply to EN50180/50181 DIN47636. Accessories
such as test rods, earth plugs and front terminals are compatible for use with the TE
range of RSTI and ELBC separable connectors.
MEDIUM VOLTAGE CABLE ACCESSORIES
Features & Benefits
24
• ELBC screened separable connectors are made of high modified EPDM rubber which
ensures the high dielectric strength and elongation at break.
• A thick conductive EPDM jacket protects the connection system against unintentional
contact.
• Unique design makes it fully shielded and submersible when matched with the right
bushing or plug.
• Unique design ensures the ELBC has a current rating up to 800A. ELBC is designed to
fit 630/1250 A type “C” bushings, as specified by EN50180 and EN50181.
• The screened separable connector exceeds CENELEC HD 629.1 S2 requirements, which
includes BS, VDE and other international specifications.
• The compact design supports the use of double "T" connections inside cable cabinets.
• A wide application range covers cable cross-sections from 25 sq. mm to 500 sq. mm.
• Compatible for use with mechanical or compression type lugs.
• Easily accessible back plug with capacitive test point.
• Few accessories required for system test, double “T” and earth connection.
• Complete kit including lugs facilitates easy installation and storage.
• 100% routine test for PD & AC.
D e sig n & C o nstruc tio n
Te c hnic a l D ata
1. Outer conductive layer
2. Insulated layer
3. Farady cage
4. Earthing eye and grounding kit
5. Stress cone
6. Compression / mechanical lug
7. Back plug
8. Stud-bolt set
9. End cap
10. Threaded bolt
Cable insulation range
15.5 ~ 37 mm
Cable cross-section range
25 ~ 500 mm2
Max.Rated voltage
17.5 kV
Rated current
800 A
2Uo PD
< 2 pC
AC withstand, 5min
54 kV
Thermal short, 1s
54 kA
Dynamic short, 1s
85 kA
Meet the international CENELEC HD 629.1
S2 specification and GB 12706.4:2008
Duyen Ha Power Equipment Co.,Ltd
S e le c tio n Info rm atio n: d im e nsio ns show n in m illim e te rs
6 / 10 ( 12 ) k V a nd 8 .7/ 15 ( 17.5 ) k V sing le -c o re, w ith c o m pre ssio n lug
Front Connector
Rear Connector
Insulation
E L B C -8 10 -25C -S C
E L B C -8 10 -35C -S C
E L B C -8 10 -50 C -S C
E L B C -8 10 -70 C -S C
E L B C -8 10 -9 5C -S C
E L B C -8 10 -120 C -S C
E L B C -8 10 -150 C -S C
E L B C -8 10 -18 5C -S C
E L B C -8 10 -24 0 C -S C
E L B C -8 10 -30 0 C -S C
E L B C -8 10 -4 0 0 C -S C
E L B C -8 10 -50 0 C -S C
E L B C -C C -8 10 -25C -S C
E L B C -C C -8 10 -35C -S C
E L B C -C C -8 10 -50 C -S C
E L B C -C C -8 10 -70 C -S C
E L B C -C C -8 10 -9 5C -S C
E L B C -C C -8 10 -120 C -S C
E L B C -C C -8 10 -150 C -S C
E L B C -C C -8 10 -18 5C -S C
E L B C -C C -8 10 -24 0 C -S C
E L B C -C C -8 10 -30 0 C -S C
E L B C -C C -8 10 -4 0 0 C -S C
E L B C -C C -8 10 -50 0 C -S C
15.5~19
15.5~19
15.5~19
18 .0 ~23
18 .0 ~23
22.0 ~27
22.0 ~27
22.0 ~27
26 .0 ~32
26 .0 ~32
31.0 ~37
31.0 ~37
Cross Section (mm2 )
Ф (mm)
25
35
50
70
95
120
150
18 5
24 0
30 0
400
50 0
6 / 10 ( 12 ) k V a nd 8 .7/ 15 ( 17.5 ) k V sing le -c o re w ith m e c ha nic a l lug
Rear Connector
Insulation
E L B C -8 10 -2550 -S C
E L B C -8 10 -70 9 5-S C
E L B C -8 10 -1218 -S C
E L B C -8 10 -24 30 -S C
E L B C -8 10 -4 0 0 -S C
E L B C -C C -8 10 -2550 -S C
E L B C -C C -8 10 -70 9 5-S C
E L B C -C C -8 10 -1218 -S C
E L B C -C C -8 10 -24 30 -S C
E L B C -C C -8 10 -4 0 0 -S C
15.5~19
18 .0 ~23
22.0 ~27
26 .0 ~32
31.0 ~37
Cross Section (mm2 )
Ф (mm)
25~50
70 ~9 5
120 ~18 5
24 0 ~30 0
400
6 / 10 ( 12 ) k V a nd 8 .7/ 15 ( 17.5 ) k V, 3 -c o re c a ble se ts, w ith he at shrink a ble trifurc atio n k its
Front Connector
Rear Connector
Insulation
E L B C -8 10 -2550
E L B C -8 10 -70 9 5
E L B C -8 10 -1218
E L B C -8 10 -24 30
E L B C -C C -8 10 -2550
E L B C -C C -8 10 -70 9 5
E L B C -C C -8 10 -1218
E L B C -C C -8 10 -24 30
15.5~19
18 .0 ~23
22.0 ~27
26 .0 ~32
Cross Section (mm2 )
Ф (mm)
25~50
70 ~9 5
120 ~18 5
24 0 ~30 0
6 / 10 ( 12 ) k V a nd 8 .7/ 15 ( 17.5 ) k V, 3 -c o re c a ble se ts, w ith c o ld shrink a ble trifurc atio n k its
Front Connector
Rear Connector
Insulation
E L B C -8 10 -2550 -C T R
E L B C -8 10 -70 9 5-C T R
E L B C -8 10 -1218 -C T R
E L B C -8 10 -24 30 -C T R
E L B C -8 10 -4 0 0 -C T R
E L B C -C C -8 10 -2550 -C T R
E L B C -C C -8 10 -70 9 5-C T R
E L B C -C C -8 10 -1218 -C T R
E L B C -C C -8 10 -24 30 -C T R
E L B C -C C -8 10 -4 0 0 -C T R
15.5~19
18 .0 ~23
22.0 ~27
26 .0 ~32
31.0 ~37
Cross Section (mm2 )
Ф (mm)
25~50
70 ~9 5
120 ~18 5
24 0 ~30 0
400
R e late d te st re po rt
Reference No.
Voltage (kV)
Specification
20 10 J D L 4 4 1
17.5
G B / T 1270 6 .4 -20 0 8
IE C 6 0 50 2.4 -20 0 5"
Duyen Ha Power Equipment Co.,Ltd
MEDIUM VOLTAGE CABLE ACCESSORIES
Front Connector
25
Elbows & Accessories
ELBC
824 screened separable connector up to 24 kV, 800 A
General Description
Raychem ELBC-824 screened separable connectors are used to connect XLPE cables to
electrical equipment ( e.g. RMU, switchgear, transformer, etc.) using CENELEC bushings
type “C” specified for 630/1250 A up to 24 kV. Made of a highly modified EPDM
rubber, ELBC is fully screened and fully submersible, suitable for indoor and outdoor
installations. For a wide application range, the design incorporates one body and five
stress cones to cover all cross-sections, from 35sq.mm to 400sq. mm. The overall and
cut-back dimensions are designed to take up minimun space in the terminal box. ELBC
810 elbow connectors are equipped with a capacitive test point for determining whether
the circuit is energised. This test point is protected by a conductive cap. Mechanical lug
and compression lug is ready for customer ordering. Both of them could cover the cable
cross-section from 35sqmm to 400sqmm. Pre-engineered design of the mechanical
lug optimizes the contact resistance between the connector and conductor. Installation
is very easy, requiring only a standard socket spanner and no additional space. The
separable connector is easily connected with the bushing and junction that comply to
EN50180/50181 DIN47636. Accessories such as test rods, earth plugs and front terminals
are compatible of use with the TE range of RSTI and ELBC separable connectors.
MEDIUM VOLTAGE CABLE ACCESSORIES
Features & Benefits
26
• ELBC screened separable connector is made of high modified EPDM rubber which
ensures the high dielectric strength and elongation at break.
• A thick conductive EPDM jacket protects the connection system against unintentional
contact.
• Unique design makes it fully shielded and submersible when matched with the right
bushing or plug.
• Unique design ensures the ELBC has a current rating up to 800 A. ELBC is designed to
fit 630/1250 A type “C” bushings, as specified by EN50180 and EN50181.
• The screened separable connector exceeds CENELEC HD 629.1 S2 requirements, which
includes BS, VDE and other international specifications.
• The compact design supports the use of double "T" connections inside cable cabinets.
• A wide application range covers cable cross-section from 35sq. mm to 400sq. mm.
• Compatible for use with mechanical or compression type lugs.
• Easily accessible back plug with capacitive test point.
• Few accessories required for system test, double “T” and earth connection.
• Complete kit including lugs facilitates easy installation and storage.
• 100% routine test for PD & AC.
D e sig n & C o nstruc tio n
1. Outer conductive layer
2. Insulated layer
3. Farady cage
4. Earthing eye and grounding kit
5. Stress cone
6. Compression and mechanical lug
7. Back plug
8. Threaded pin kit
9. End cap
10. Threaded bolt
9
8
7
1
6
2
Te c hnic a l D ata
C able insulation range
C able c ross-sec tion range
Max .R ated voltage
R ated c urrent
B asic im pulse level
2U o P D
A C w ithstand, 5 m in
T herm al short, 1 s
D y nam ic short, 1 s
15.5 ~ 37 m m
35 ~ 4 0 0 m m 2
24 kV
80 0 A
125 kV
< 5 pC
54 kV
54 kA
8 5 kA
Meet the international CENELEC HD 629.1
S2 specification and GB 12706.4:2008
3
5
4
Duyen Ha Power Equipment Co.,Ltd
S e le c tio n Info rm atio n: d im e nsio ns show n in m illim e te rs
12 / 2 0 ( 24 ) k V S ing le -c o re, c o ppe r c o nd uc to r w ith c o m pre ssio n c o ppe r lug
Front Connector
Rear Connector
Insulation
E L B C -8 24 -35C -S C
E L B C -8 24 -50 C -S C
E L B C -8 24 -70 C -S C
E L B C -8 24 -9 5C -S C
E L B C -8 24 -120 C -S C
E L B C -8 24 -150 C -S C
E L B C -8 24 -18 5C -S C
E L B C -8 24 -24 0 C -S C
E L B C -8 24 -30 0 C -S C
E L B C -8 24 -4 0 0 C -S C
E L B C -C C -8 24 -35C -S C
E L B C -C C -8 24 -50 C -S C
E L B C -C C -8 24 -70 C -S C
E L B C -C C -8 24 -9 5C -S C
E L B C -C C -8 24 -120 C -S C
E L B C -C C -8 24 -150 C -S C
E L B C -C C -8 24 -18 5C -S C
E L B C -C C -8 24 -24 0 C -S C
E L B C -C C -8 24 -30 0 C -S C
E L B C -C C -8 24 -4 0 0 C -S C
18 ~23
18 ~23
18 ~23
22~27
22~27
26 ~32
26 ~32
26 ~32
31~37
31~37
Cross Section (mm2 )
Φ (mm)
35
50
70
95
120
150
18 5
24 0
30 0
400
12 / 2 0 ( 24 ) k V S ing le -c o re w ith m e c ha nic a l lug
Rear Connector
Insulation
E L B C -8 24 -3570 -S C
E L B C -8 24 -9 512-S C
E L B C -8 24 -1524 -S C
E L B C -8 24 -30 4 0 -S C
E L B C -C C -8 24 -3570 -S C
E L B C -C C -8 24 -9 512-S C
E L B C -C C -8 24 -1524 -S C
E L B C -C C -8 24 -30 4 0 -S C
18 ~23
22~27
26 ~32
31~37
Cross Section (mm2 )
Φ (mm)
35~70
9 5~120
150 ~24 0
30 0 ~4 0 0
Trifurc atio n k its fo r 3 -c o re c a ble s
T R F C -H 1
T R F C -C 1
T R F C -C 2
H eat S hrinkable trifurc ation kits
C old S hrinkable trifurc ation kits
C old S hrinkable trifurc ation kits
3*1 M tubing and 1 pc breakout and 1 m earth braid
3*50 0 m m tube and 1 pc breakout and 1.4 m earth braid
6 *50 0 m m tube and 1 pc breakout and 1.4 m earth braid
A c c e sso rie s
Test Rod
R S T I-6 8 T R
R S T I-6 8 T R L
R S T I-6 8 T R A
310 m m
4 60 mm
K it inc luding 2 short and 1 long rods
Terminal Plug
R S T I-6 8 T P
Earthing Adapter
R S T I-6 8 E A 20
R S T I-6 8 E A 25
B all Φ 20 m m
B all Φ 25 m m
Single Connection
Material for three phases
1* E L B C -8 24 -x x x x ( kit)
Live end Seal
Material for three phases
1* E L B C -8 24 -x x x x ( kit)
1* R S T I 6 8 T P
MEDIUM VOLTAGE CABLE ACCESSORIES
Front Connector
R e late d te st re po rt
Reference No.
20 11J D L 56 9
Duyen Ha Power Equipment Co.,Ltd
Voltage (kV)
Specification
24
G B / T 1270 6 .4 -20 0 8
IE C 6 0 50 2.4 -20 0 5
27
Elbows & Accessories
RSTI-58
Screened separable connection system 800 A up to 24 kV
General Description
RSTI: Raychem RSTI-58 screened separable connectors are designed to connect singleand three-core polymeric cables to medium-voltage gas insulated switchgear and
other equipment using CENELEC bushings type “C” specified for 630/1250 A up to
24 kV. Made of a highly modified silicone rubber and protected by a thin-walled outer
conductive screen connected to earth, RSTI-58 connectors are equally suited for indoor
and outdoor installation. Supporting a wide application range, the design incorporates
one body and two stress cone adapters to cover all cross-sections from 25 to 300
mm 2 . The overall and cut-back dimensions are designed to take up minimum space
in the terminal box. RSTI-58 connectors are equipped with a capacitive test point for
determining whether the circuit is energized. This test point is protected by a conductive
cap. After cable preparation and lubrication, the stress control adapter is simply slid into
place, followed by the screened connector body. These two components can be installed
under virtually any conditions. A separable mounting system ensures easy installation
of the connector onto the bushing. All kits include highperformance multi-range
mechanical or DIN compression lugs matching the design of the RSTI-58 connector.
The RSTI-CC screened coupling connector is designed to mate with the rear end of the
base screened connector system connector system is designed designed for 24 kV.
MEDIUM VOLTAGE CABLE ACCESSORIES
Features & Benefits
28
RSTI:
• The insulation of the connector is made of a highly modified silicone rubber
characterised by high tracking resistance, elongation at break and non-flammability.
• A thin-walled screen is permanently bonded onto the insulation and protects the
connection system against unintentional contact.
• The screened connector need not be removed for oversheath testing.
• The screened cable connector exceeds CENELEC HD 629.1 S2 requirements, which
includes BS, VDE and other international specifications.
• Design fits 630/1250 A bushings type “C” as specified by EN50180 and EN50181.
• The compact design supports the use of double “T” connections inside standard
terminal boxes.
• The wide application range covers cable cross-sections from 25 to 300 mm2 .
• Conductor connection with mechanical or DIN lugs.
• Easily accessible rear plug with capacitive test point.
• Few accessories required for system test, double “T” and earth connection.
• Complete kit including lugs facilitates installation and storage.
RSTI-CC:
• The insulation of the coupling connector is made of a highly modified silicone rubber
characterised by high tracking resistance, elongation at break and nonflammability.
• A thin-walled screen is permanently bonded onto the insulation and protects the
connection system against accidental contact.
• The screened coupling connector need not be removed for oversheath testing.
• The combination of screened connector and coupling connector exceeds
CENELEC HD 629.1 S2 requirements, which include BS, VDE and other international
specifications.
• The combination of screened connector and coupling connector fits 630/1250 A
bushings type “C” as specified by EN50180 and EN50181.
• The compact design supports the use of double “T” connections inside standard
terminal boxes.
• The wide application range covers cable cross-sections from 25 to 300 mm2 .
• Conductor connection with mechanical or DIN lugs.
• Easily accessible rear plug with capacitive test point.
• Few accessories required for system test and earth connection.
• Complete kit including lugs for easier installation and storage.
Duyen Ha Power Equipment Co.,Ltd
S e le c tio n Info rm atio n: d im e nsio ns show n in m illim e te rs
Cross Section (mm2 )
Diameter Reference number
Core insulation (mm)
R S T I-58 10
R S T I-58 11
R S T I-58 12
R S T I-58 13
R S T I-58 14
R S T I-58 15
R S T I-58 26
R S T I-58 27
R S T I-58 28
R S T I-58 29
25
35
50
70
95
120
150
18 5
24 0
30 0
12.7- 23.4
12.7- 23.4
12.7- 23.4
12.7- 23.4
12.7- 23.4
12.7- 23.4
21.2- 34 .6
21.2- 34 .6
21.2- 34 .6
21.2- 34 .6
R S T I-58 51
35-9 5
12.7- 23.4
R S T I-58 52
9 5-120
12.7- 23.4
R S T I-58 53
9 5-24 0
17.0 - 30 .1
R S T I-58 54
150 -24 0
21.2- 34 .6
R S T I-58 55
18 5-30 0
21.2- 34 .6
R S T I-C C -58 10
R S T I-C C -58 11
R S T I-C C -58 12
R S T I-C C -58 13
R S T I-C C -58 14
R S T I-C C -58 15
R S T I-C C -58 26
R S T I-C C -58 27
R S T I-C C -58 28
R S T I-C C -58 29
25
35
50
70
95
120
150
18 5
24 0
30 0
12.7- 23.4
12.7- 23.4
12.7- 23.4
12.7- 23.4
12.7- 23.4
12.7- 23.4
21.2- 34 .6
21.2- 34 .6
21.2- 34 .6
21.2- 34 .6
R S T I-C C -58 51
35-9 5
12.7- 23.4
R S T I-C C -58 52
9 5-120
12.7- 23.4
R S T I-C C -58 53
9 5-24 0
17.0 - 30 .1
R S T I-C C -58 54
150 -24 0
21.2- 34 .6
R S T I-C C -58 55
18 5-30 0
21.2- 34 .6
Duyen Ha Power Equipment Co.,Ltd
Lugs type
Voltage Level
Type
C om pression lugs
C om pression lugs
C om pression lugs
C om pression lugs
C om pression lugs
C om pression lugs
C om pression lugs
C om pression lugs
C om pression lugs
C om pression lugs
Mec hanic al lugs and
shear bolts
Mec hanic al lugs and
shear bolts
Mec hanic al lugs and
shear bolts
Mec hanic al lugs and
shear bolts
Mec hanic al lugs and
shear bolts
C om pression lugs
C om pression lugs
C om pression lugs
C om pression lugs
C om pression lugs
C om pression lugs
C om pression lugs
C om pression lugs
C om pression lugs
C om pression lugs
Mec hanic al lugs and
shear bolts
Mec hanic al lugs and
shear bolts
Mec hanic al lugs and
shear bolts
Mec hanic al lugs and
shear bolts
Mec hanic al lugs and
shear bolts
12/ 24
12/ 24
12/ 24
12/ 24
12/ 24
12/ 24
12/ 24
12/ 24
12/ 24
12/ 24
F ront
F ront
F ront
F ront
F ront
F ront
F ront
F ront
F ront
F ront
12/ 24
F ront
12
F ront
12/ 24
F ront
12/ 24
F ront
12/ 24
F ront
12/ 24
12/ 24
12/ 24
12/ 24
12/ 24
12/ 24
12/ 24
12/ 24
12/ 24
12/ 24
R ear
R ear
R ear
R ear
R ear
R ear
R ear
R ear
R ear
R ear
12/ 24
R ear
12
R ear
12/ 24
R ear
12/ 24
R ear
12/ 24
R ear
MEDIUM VOLTAGE CABLE ACCESSORIES
Catalog Number
29
Elbows & Accessories
RSTI-68
Screened separable connection system 1250 A up to 42 kV
General Description
Raychem RSTI screened separable connectors are designed to connect single- and
three-core polymeric cables to medium-voltage gas insulated switchgear and other
equipment using CENELEC bushings Type C1=630 A and C2=1250 A, specified up to
42 kV. Made of a highly modified silicone rubber and protected by a thin walled outer
conductive screen connected to earth, RSTI connectors are equally suited for indoor and
outdoor installation. Supporting a wide application range, the design incorporates one
body and two stress cone adapters to cover all cross-sections from 35 to 300 mm2 . The
overall and cut back dimensions are designed to take up minimum space in the terminal
box. RSTI connectors are equipped with a capacitive test point for determining whether
the circuit is energised. A conductive cap protects this test point.
MEDIUM VOLTAGE CABLE ACCESSORIES
Features & Benefits
30
• The insulation of the connector is made of a highly modified silicone rubber
characterised by high tracking resistance, elongation at break and non-flammability.
• A thin walled screen is permanently bonded onto the insulation and protects the
connection system against accidental contact.
• The screened connector need not be removed for over sheath testing.
• The screened cable connector exceeds CENELEC HD 629.1 S2 requirements, which
includes BS; VDE and other international specifications.
• Design fits 630 A and 1250 A bushings (Interface “C1” and “C2”) as specified by EN
50180 and EN 50181.
• The compact design supports the use of double “T” connections inside standard
terminal boxes.
• The wide application range covers cable cross sections from 35 to 300 mm2 .
• Conductor connection with mechanical, DIN or deep indent lugs.
• Easily accessible rear plug with capacitive test point.
• Few accessories required for system test, double “T” and earth connection.
• Complete kit including lugs facilitates installation and storage.
Duyen Ha Power Equipment Co.,Ltd
S e le c tio n Info rm atio n: d im e nsio ns show n in m illim e te rs
Cross Section (mm2 )
Diameter Reference number
Core insulation (mm)
Lugs type
Voltage Level
Type
R S T I-6 8 11
R S T I-6 8 12
R S T I-6 8 13
R S T I-6 8 14
R S T I-6 8 15
R S T I-6 8 16
R S T I-6 8 17
R S T I-6 8 18
R S T I-6 8 21
R S T I-6 8 22
R S T I-6 8 23
R S T I-6 8 24
R S T I-6 8 25
R S T I-6 8 26
R S T I-6 8 27
R S T I-6 8 28
R S T I-6 8 51
R S T I-6 8 52
R S T I-6 8 53
R S T I-6 8 55
R S T I-C C -6 8 11
R S T I-C C -6 8 12
R S T I-C C -6 8 13
R S T I-C C -6 8 14
R S T I-C C -6 8 15
R S T I-C C -6 8 16
R S T I-C C -6 8 17
R S T I-C C -6 8 18
R S T I-C C -6 8 21
R S T I-C C -6 8 22
R S T I-C C -6 8 23
R S T I-C C -6 8 24
R S T I-C C -6 8 25
R S T I-C C -6 8 26
R S T I-C C -6 8 27
R S T I-C C -6 8 28
R S T I-C C -6 8 51
R S T I-C C -6 8 52
R S T I-C C -6 8 53
R S T I-C C -6 8 55
50
70
95
120
150
18 5
24 0
30 0
50
70
95
120
150
18 5
24 0
30 0
35-9 5
9 5-150
120 -24 0
18 5-30 0
50
70
95
120
150
18 5
24 0
30 0
50
70
95
120
150
18 5
24 0
30 0
35-9 5
9 5-150
120 -24 0
18 5-30 0
22.4 - 35.5
22.4 - 35.5
22.4 - 35.5
22.4 - 35.5
28 .9 - 4 2.0
28 .9 - 4 2.0
28 .9 - 4 2.0
28 .9 - 4 2.0
22.4 - 35.5
22.4 - 35.5
22.4 - 35.5
22.4 - 35.5
28 .9 - 4 2.0
28 .9 - 4 2.0
28 .9 - 4 2.0
28 .9 - 4 2.0
22.4 - 35.5
22.4 - 35.5
28 .9 - 4 2.0
28 .9 - 4 2.0
22.4 - 35.5
22.4 - 35.5
22.4 - 35.5
22.4 - 35.5
28 .9 - 4 2.0
28 .9 - 4 2.0
28 .9 - 4 2.0
28 .9 - 4 2.0
22.4 - 35.5
22.4 - 35.5
22.4 - 35.5
22.4 - 35.5
28 .9 - 4 2.0
28 .9 - 4 2.0
28 .9 - 4 2.0
28 .9 - 4 2.0
22.4 - 35.5
22.4 - 35.5
28 .9 - 4 2.0
28 .9 - 4 2.0
A l C om pression lugs
A l C om pression lugs
A l C om pression lugs
A l C om pression lugs
A l C om pression lugs
A l C om pression lugs
A l C om pression lugs
A l C om pression lugs
C u C om pression lugs
C u C om pression lugs
C u C om pression lugs
C u C om pression lugs
C u C om pression lugs
C u C om pression lugs
C u C om pression lugs
C u C om pression lugs
Mec hanic al lugs and shear bolts
Mec hanic al lugs and shear bolts
Mec hanic al lugs and shear bolts
Mec hanic al lugs and shear bolts
A l C om pression lugs
A l C om pression lugs
A l C om pression lugs
A l C om pression lugs
A l C om pression lugs
A l C om pression lugs
A l C om pression lugs
A l C om pression lugs
C u C om pression lugs
C u C om pression lugs
C u C om pression lugs
C u C om pression lugs
C u C om pression lugs
C u C om pression lugs
C u C om pression lugs
C u C om pression lugs
Mec hanic al lugs and shear bolts
Mec hanic al lugs and shear bolts
Mec hanic al lugs and shear bolts
Mec hanic al lugs and shear bolts
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42
F ront
F ront
F ront
F ront
F ront
F ront
F ront
F ront
F ront
F ront
F ront
F ront
F ront
F ront
F ront
F ront
F ront
F ront
F ront
F ront
R ear
R ear
R ear
R ear
R ear
R ear
R ear
R ear
R ear
R ear
R ear
R ear
R ear
R ear
R ear
R ear
R ear
R ear
R ear
R ear
Duyen Ha Power Equipment Co.,Ltd
MEDIUM VOLTAGE CABLE ACCESSORIES
Catalog Number
31
Elbows & Accessories
RSES 400 A screened, separable elbow connection
system 400 A for 24 kV and 36 kV
General Description
Raychem RSES screened, separable elbow connectors are designed to connect single
and three-core polymeric cables to medium-voltage gas-insulated switchgear and other
equipment using CENELEC bushing Type "B" specified for 400 A up to 36 kV. Made
of a highly modified silicone rubber and protected by a thin-walled outer conductive
screen connected to earth, RSES elbow connectors are equally suited for indoor and
outdoor installation. Supporting a wide application range, the design incorporates one
body and two stress cone adapters to cover all cross-sections from 50 to 300 mm 2 . The
overall and cut-back dimensions are designed to take up minimum space in the terminal
box. RSES elbow connectors are equipped with a capacitive test point for determining
whether the circuit is energised. This test point is protected by a conductive cap. After
cable preparation and lubrication, the stress control adapter is simply slid into place,
followed by the screened connector body. These two components can be installed under
virtually any conditions. A separable mounting system ensures easy installation of the
connector onto the bushing. All kits include high-performance multi-range mechanical
lugs matching the design of the RSES elbow connector.
MEDIUM VOLTAGE CABLE ACCESSORIES
Features & Benefits
32
• The insulation of the connector is made of a highly modified silicone rubber
characterised by high tracking resistance, elongation at break and non-flammability.
• A thin-walled screen is permanently bonded onto the insulation and protects the
connection system against accidental contact.
• The screened connector doesn't need to be removed for oversheath testing.
• The screened cable connector exceeds CENELEC HD 629.1 S2 requirements, which
includes BS, VDE and other international specifications.
• Design fits 400 A bushings (interface "B") as specified by EN 50180 and EN 50181.
• The wide application range covers cable cross-sections from 50 to 300 mm 2 .
• Conductor connection with mechanical lugs, designed to accept aluminium and
copper conductors.
• Easily accessible capacitive test point.
• Few accessories required for system test.
• Complete kit including lugs facilitates easy installation and storage.
D e sig n & C o nstruc tio n
A pplic atio ns
6
9
5
3
8
1
2
4
7
1. Screened body
2. Inner screen
3. Mechanical lug
4. Stress cone adapter
5. Earthing eye and ground lead
6. Pin
7. Test point
8. Conductive covering cap
9. Stainless steel bail
Duyen Ha Power Equipment Co.,Ltd
Te c hnic a l D ata
C able insulation diam eter range
C onnec tor c ross-sec tion range
Max im um system voltage
C ontinuous c urrent rating
B asic im pulse level
P artial disc harge at 2 U 0
A C voltage w ithstand, 5 m in
D C voltage w ithstand, 15 m in
T herm al short c irc uit, 1 s
D y nam ic short c irc uit
T he adapters m eet the international C E N E L E C H D 6 29 .1 S 2 spec ific ation.
22.4 - 4 2.0 m m
50 - 30 0 m m 2
36 kV
400 A
19 4 kV
< 2 pC
8 5.5 kV
114 kV
18 .1 kA
4 8 .5 kA
S e le c tio n Info rm atio n: d im e nsio ns show n in m illim e te rs
S c re e ne d se pa ra ble e lbow c o nne c tio n sy ste m w ith m e c ha nic a l lug s a nd she a r bo lts
Cross section (mm2 )
Insulation Diameter (mm)
Reference Number
70 ~9 5
9 5~24 0
18 5~30 0
22.4 ~35.5
22.4 ~35.5
22.4 ~35.5
R S E S -6 4 51
R S E S -6 4 52
R S E S -6 4 54
3 6 k V, C o nd uc to r m ate ria l: A l o r C u
Cross section (mm2 )
Insulation Diameter (mm)
Reference Number
50 ~9 5
9 5~150
120 ~24 0
18 5~30 0
22.4 ~35.5
22.4 ~35.5
28 .9 ~4 2.0
28 .9 ~4 2.0
R S E S -6 4 51
R S E S -6 4 52
R S E S -6 4 53
R S E S -6 4 55
R e late d te st re po rts
Reference No.
Voltage (kV)
Specification
P P R -210 2
24
C E L E N E C H D 6 29 .1 S 2 20 0 6
Duyen Ha Power Equipment Co.,Ltd
MEDIUM VOLTAGE CABLE ACCESSORIES
24 k V, C o nd uc to r m ate ria l: A l o r C u
33
Elbows & Accessories
RSES / RSSS 250 A
Screened adaptor system 250 A, up to 24 kV
General Description
Raychem RSES/RSSS screened, separable adaptors are designed to connect single-core
polymeric cables to medium voltage equipment (transformers, switchgears, motors etc.)
using CENELEC bushings Type "A" specified for 250 A up to 24 kV. Made of crosslinked
EPDM and protected with a minimum 3 mm moulded conductive shield connected
to earth, Raychem deadbreak adaptors are suitable for both indoor and outdoor
installations. Their wide application range allows a minimum number of bodies to cover
several different cable cross-sections without the need for additional cable adaptors.
The cut-back dimensions for all cable sizes are the same for RSSS and RSES systems.
Screened adaptors are equipped with a capacitive test point to ensure that the circuit
is not energized before disconnection. The capacitive test point is protected by a
conductive cap. A range of high strength bimetallic compression connectors tested
according to IEC 61238-1:2003 are offered to connect both aluminium and copper
conductors. After cable preparation and lubrication, the adaptors can simply be slid into
place under virtually all conditions. A separable mounting system provides for an easy
installation of the adaptor onto the bushing.
Features & Benefits
MEDIUM VOLTAGE CABLE ACCESSORIES
•
•
•
•
•
•
34
Premolded deadbreak elbow/straight connection.
Thick walled screen protects against unintentional contact.
Design fits bushing profile “A” in accordance with EN50181.
Built in capacitive test point to determine the circuit status.
Cold applied range taking product.
Conductor connection with bimetallic compression lugs.
D e sig n & C o nstruc tio n
1. Screened body
2. Capacitive test point
3. Stress cone
4. Conductive cable entrance
5. Earthing eye
6. Inner screen
7. Retaining shoulder
8. Compression pin-connector
9. Lifting eye
10. Pin
11. Compression connector
Duyen Ha Power Equipment Co.,Ltd
Te c hnic a l D ata
C able insulation diam eter range
C onnec tor c ross sec tion range
Max im um system voltage
C ontinuous c urrent rating
B asic im pulse level
P artial disc harge at 2 U o
A C voltage w ithstand
D C voltage w ithstand
RSES 250A 17.5 kV
RSSS 250A 17.5 kV
RSES 250A 24 kV
RSSS 250A 24 kV
13.5 ~ 33.5 m m
35 ~ 120 m m 2
17.5 kV
250 A
9 5 kV
< 5 pC
4 0 kV, 5 m in
35 kV, 15 m in
13.5 ~ 24 .1 m m
16 ~ 9 5 m m 2
17.5 kV
250 A
9 5 kV
< 5 pC
4 0 kV, 5 m in
35 kV, 15 m in
13.5 ~ 33.5 m m
16 ~ 120 m m 2
24 kV
250 A
125 kV
< 5 pC
50 kV, 1 m in
9 6 kV, 30 m in
13.5 ~ 26 .5 m m
16 ~ 9 5 m m 2
24 kV
250 A
125 kV
< 5 pC
50 kV, 1 m in
9 6 kV, 30 m in
The adaptors have been tested in accordance with the international specifications (e.g. ANSI/IEEE 386, IEC 540, VDE 0278
and GB 12706-2002).
The bimetallic connectors have been tested in accordance with VDE 0220 on aluminium and copper conductors.
S e le c tio n Info rm atio n: d im e nsio ns show n in m illim e te rs
Cross section (mm2 )
Insulation Diameter (mm)
Reference Ordering #
Bushing Type
35 C u
50 C u
70 C u
95 Cu
120 C u
17.0 ~20 .0
17.0 ~20 .0
20 .0 ~23.0
20 .0 ~23.0
23.0 ~24 .6
R S E S -10 35-S C
R S E S -10 50 -S C
R S E S -10 70 -S C
R S E S -10 9 5-S C
R S E S -10 12-S C
Ty pe A ( 250 A )
Ty pe A ( 250 A )
Ty pe A ( 250 A )
Ty pe A ( 250 A )
Ty pe A ( 250 A )
Insulation Diameter (mm)
Reference Ordering #
Bushing Type
17.0 ~20 .0
17.0 ~20 .0
20 .0 ~23.0
20 .0 ~23.0
23.0 ~24 .6
R S S S -10 35-S C
R S S S -10 50 -S C
R S S S -10 70 -S C
R S S S -10 9 5-S C
R S S S -10 12-S C
Ty pe A ( 250 A )
Ty pe A ( 250 A )
Ty pe A ( 250 A )
Ty pe A ( 250 A )
Ty pe A ( 250 A )
S c re e ne d S tra ig ht A d a pte rs 2 5 0 A 17.5 k V
Cross section (mm
2
)
35 C u
50 C u
70 C u
95 Cu
120 C u
S c re e ne d E lbow A d a pte rs 2 5 0 A 24 k V
Diameter over insulation
Cross section
16 mm 2
25 mm 2
35 mm 2
50 mm 2
70 mm 2
95 mm 2
120 mm 2
13.5~17.4 m m
16 .3~20 .8 m m
19 .6 ~24 .1 m m
23.1~27.7 m m
27.9 ~33.5 m m
R S E S 520 1
R S E S 5211
−
−
−
R S E S 520 2
R S E S 5212
−
−
−
R S E S 520 3
R S E S 5213
R S E S 5223
−
−
R S E S 520 5
R S E S 5215
R S E S 5225
R S E S 5235
−
−
R S E S 5217
R S E S 5227
R S E S 5237
−
−
R S E S 5219
R S E S 5229
R S E S 5239
R S E S 524 9
−
−
R S E S 5224
R S E S 5234
R S E S 524 4
S c re e ne d S tra ig ht A d a pte rs 2 5 0 A 24 k V
Diameter over insulation
Cross section
16 mm 2
25 mm 2
35 mm 2
50 mm 2
70 mm 2
95 mm 2
13.5~17.4 m m
16 .3~20 .8 m m
19 .6 ~24 .1 m m
21.0 ~26 .5 m m
R S S S 520 1
R S S S 5211
−
−
R S S S 520 2
R S S S 5212
−
−
R S S S 520 3
R S S S 5213
R S S S 5223
−
R S S S 520 5
R S S S 5215
R S S S 5225
R S S S 5255
−
R S S S 5217
R S S S 5227
R S S S 5257
−
R S S S 5219
R S S S 5229
R S S S 5259
R e late d te st re po rts
Reference No.
Voltage (kV)
Specification
20 0 5L Z 24 9
P P R -10 6 5
P P R -1116
P P R -1150
P P R -1117
P P R -1151
P P R -2527
P P R -2528
P P R -26 9 7
17.5
24
24
24
24
24
24
24
24
G B / T 1270 6 .4 -20 0 2
Duyen Ha Power Equipment Co.,Ltd
MEDIUM VOLTAGE CABLE ACCESSORIES
S c re e ne d E lbow A d a pte rs 2 5 0 A 17.5 k V
V D E 0 278
V D E 0 220
C E N E L E C H D 6 29 .1 S 2:20 0 6 -0 2
LC in water
35
Elbows & Accessories
RCAB
Elastomeric insulating bushing boot for bushings
up to 630 A, 24 kV
General Description
Raychem RCAB elastomeric insulating boots are moulded parts which fit over the
connection between the cable lug and the inline or right-angled equipment bushing to
improve phase-to-phase and phase-to-ground insulation. They are used in switchgear
and transformer cable boxes where the air clearances are insufficient for normal
operation, or to protect against flashover due to rodents or high humidity.
The non-tracking elastomeric housing has excellent erosion resistance, dielectric
properties and environmental resistance, giving superb performance in areas of high
humidity and electrical stress.
RCAB boots work in combination with all Raychem termination product lines, including
both elastomeric and traditional heatshrink technology.
RCAB boots are quick and easy to install and do not require any taping of the bushing
or the termination. The boot can easily be removed and reinstalled without the need
for additional material or tooling, allowing access to the bushing connection for test
purposes.
MEDIUM VOLTAGE CABLE ACCESSORIES
Features & Benefits
36
•
•
•
•
•
•
•
Simple and easy installation
Tool free application
High-performance insulation material
Excellent track and erosion resistance
Removable and reinstallable
Unlimited shelf life
Connection can be energised immediately after installation.
R C A B fa m ily
R C A B rig ht a ng le o r inline a pplic atio n up to 17.5 k V
Duyen Ha Power Equipment Co.,Ltd
R C A B inline a pplic atio n fo r 24 k V
Description
RCAB 4110
RCAB 4120
RCAB 5120
Max .system voltage U m
B asic im pulse level
C ollar siz e
B ushing diam eter
B ushing ty pes: to D IN , C E N E L E C , A N S I
C able c ross sec tion
17.5 kV
9 5 kV
N o.1
31~4 5 m m
35~4 0 0 m m 2
17.5 kV
9 5 kV
N one
4 6 ~70 m m
4 0 0 / 6 30 A
35~4 0 0 m m 2
24 kV
125 kV
4 6 ~6 1 m m
4 0 0 / 6 30 A
35~30 0 m m 2
R e late d te st re po rts
Reference No.
Voltage (kV)
Specification
P P R -1336
P P R -138 3
17.5
24
C E N E L E C H D 6 29 .1
Duyen Ha Power Equipment Co.,Ltd
MEDIUM VOLTAGE CABLE ACCESSORIES
R ating & S pe c ifi c atio n
37
Elbows & Accessories
RPIT
Inner cone connector up to 52 kV, 1250 A
General Description
Raychem RPIT is an inner cone cable connector made of silicone rubber for cable
connection to MV equipments, such as switchgear, ring main units and transformer up
to 52 kV. The termination profile and interface are in accordance to EN 50180 and EN
50181 for inner cone connections. The contact parts are designed for circular stranded
aluminium or copper conductors in accordance to IEC 60228.
The basic construction of the mating termination follows well known design principles
and incorporates a lamellate contact system which ensures reliable current transmission
via a cone clamp to the conductor. The interface between the silicone body of the
termination and the bushing is kept permanently sealed via the pressure of a spring
between the insulator and the flange of the termination cover. The area between the
termination flange and the cable is sealed against ingress of moisture with heat-shrink
tubing.
Features & Benefits
MEDIUM VOLTAGE CABLE ACCESSORIES
• Separable inline connection for high current, gas insulated switchgear up to 52 kV.
• Termination mating interface in accordance to EN 50180 and EN 50181 for inner cone
connections.
• The contact parts are designed for circular stranded aluminium or copper conductors
according to IEC-60228.
• The connectors have been tested in accordance with the international specifications
(e.g. IEC 60502-4, GB 12706.4).
• Operating voltage up to 52 kV, nominal current up to 1250 A.
2
• Cable coverage up to 630 mm
.
38
D e sig n & C o nstruc tio n
B ushing pa rts
1. C onduc tor
2. E poxy resin
3. Hexagon soc ket head c ap sc rew s
4 . G asket
C a ble Te rm inatio n pa rts
5. P lug
6 . W edge
7. S topper ring
8 . P re-m oulded stress cone
9 . Hexagon soc ket head c ap sc rew s
10 . P rotec tion cover
11. W ater proofing layer
12. Test lead
Duyen Ha Power Equipment Co.,Ltd
R ating & S pe c ifi c atio n
Item
Max .operating voltage U m
N om inal c urrent I N
C onduc tor
X L P E dia.
R ange of c able siz e
R ated power frequenc y w ithstand voltage
R ated im pulse w ithstand voltage
P artial disc harge
R ated short-c irc uit c urrent
kV
A
mm2
mm
kV / 5m in
kV / ± 10 tim es
1.73U o ( pC )
kA
Size 2
Size 3
Size 3
42
80 0
Max . 4 0 0
Max . 36 .5
117
20 0
≤5
50
42
1250
Max . 6 30
Max . 50
117
20 0
≤5
50
52
1250
Max . 6 30
Max . 50
124
250
≤5
50
Description
Cross-section
(mm)
Dia.over
Insulation
(mm)
R P IT-1-730 5-C N ( 0 3)
R P IT-1-7370 -C N ( 0 3)
R P IT-1-739 5-C N ( 0 3)
R P IT-1-7312-C N ( 0 3)
R P IT-1-7315-C N ( 0 3)
R P IT-1-7318 -C N ( 0 3)
R P IT-1-7324 -C N ( 0 3)
R P IT-1-7330 -C N ( 0 3)
R P IT-1-734 0 -C N ( 0 3)
R P IT-1-7350 -C N ( 0 3)
R P IT-1-730 5
R P IT-1-7370
R P IT-1-739 5
R P IT-1-7312
R P IT-1-7315
R P IT-1-7318
R P IT-1-7324
R P IT-1-7330
R P IT-1-734 0
R P IT-1-7350
R P IT-1-736 3
R P IT-1-6 30 5
R P IT-1-6 370
R P IT-1-6 39 5
R P IT-1-6 312
R P IT-1-6 315
R P IT-1-6 318
R P IT-1-6 324
R P IT-1-6 330
R P IT-1-6 34 0
R P IT-1-6 350
R P IT-1-6 36 3
R P IT-1-5312
R P IT-1-5315
R P IT-1-5318
R P IT-1-5 324
R P IT-1-5330
R P IT-1-534 0
R P IT-1-5350
R P IT-1-536 3
50
70
95
120
150
18 5
24 0
30 0
400
50 0
50
70
95
120
150
18 5
24 0
30 0
400
50 0
6 30
50
70
95
120
150
18 5
24 0
30 0
400
50 0
6 30
120
150
18 5
24 0
30 0
400
50 0
6 30
29 .0 ~32.0
32.0 ~35.0
32.0 ~35.0
35.0 ~37.5
35.0 ~37.5
37.5~4 0 .0
4 0 .0 ~4 2.5
4 2.5~4 5.0
4 5.0 ~4 7.5
4 7.0 ~50 .0
26 .0 ~29 .0
28 .0 ~31.0
29 .0 ~32.0
29 .0 ~32.0
32.0 ~35.0
32.0 ~35.0
35.0 ~37.5
37.5~4 0 .0
4 2.5~4 5.0
4 5.0 ~4 7.5
4 7.0 ~50 .0
25.0 ~28 .0
26 .0 ~29 .0
28 .0 ~31.0
29 .0 ~32.0
3 2.0 ~35.0
32.0 ~35.0
35.0 ~37.5
37.5~4 0 .0
4 0 .0 ~4 2.5
4 2.5~4 5.0
4 7.0 ~50 .0
25.0 ~28 .0
26 .0 ~29 .0
28 .0 ~31.0
29 .0 ~32.0
32.0 ~35.0
35.0 ~37.5
37.5~4 0 .0
4 2.5~4 5.0
R P IT-1-3324
R P IT-1-3330
R P IT-1-334 0
R P IT-1-3350
R P IT-1-336 3
24 0
30 0
400
50 0
6 30
26 .0 ~29 .0
28 .0 ~31.0
29 .0 ~32.0
32.0 ~35.0
35.0 ~37.5
S e le c tio n Info rm atio n: d im e nsio ns show n in m illim e te rs
Size 2
Voltage Level
20 .8 / 36 ( 4 2) kV
( IE C )
19 / 33 ( 36 ) kV
( IE C )
12/ 20 ( 24 ) kV
( IE C )
6 / 10 ( 12) kV
( IE C )
Description
Cross-section
(mm)
R P IT-1-720 5-C N
R P IT-1-7270 -C N
R P IT-1-729 5-C N
R P IT-1-7212-C N
R P IT-1-7215-C N
R P IT-1-7218 -C N
R P IT-1-7224 -C N
50
70
95
120
150
18 5
24 0
30 .0 ~33.0
30 .0 ~33.0
33.0 ~36 .0
33.0 ~36 .0
35.5~38 .0
37.5~4 0 .0
4 0 .0 ~4 2.0
R P IT-1-720 5
R P IT-1-7270
R P IT-1-729 5
R P IT-1-7212
R P IT-1-7215
R P IT-1-7218
R P IT-1-7224
R P IT-1-7230
50
70
95
120
150
18 5
24 0
30 0
26 .5~30 .0
26 .5~30 .0
30 .0 ~33.0
30 .0 ~33.0
33.0 ~36 .0
33.0 ~36 .0
35.5~38 .0
37.5~4 0 .0
R P IT-1-6 20 5
R P IT-1-6 270
R P IT-1-6 29 5
R P IT-1-6 212
R P IT-1-6 215
R P IT-1-6 218
R P IT-1-6 224
R P IT-1-6 230
50
70
95
120
150
18 5
24 0
30 0
23.5~26 .5
26 .5~30 .0
26 .5~30 .0
30 .0 ~33.0
30 .0 ~33.0
33.0 ~36 .0
35.5~38 .0
37.5~4 0 .0
R P IT-1-520 5
R P IT-1-5270
R P IT-1-529 5
R P IT-1-5212
R P IT-1-5215
R P IT-1-5218
R P IT-1-5224
R P IT-1-5230
R P IT-1-524 0
R P IT-1-5250
R P IT-1-3212
R P IT-1-3215
R P IT-1-3218
R P IT-1-3224
R P IT-1-3230
R P IT-1-324 0
R P IT-1-3250
R P IT-1-326 3
50
70
95
120
150
18 5
24 0
30 0
400
50 0
120
150
18 5
24 0
30 0
400
50 0
6 30
19 .5~22.5
21.0 ~24 .0
23.5~26 .5
23.5~26 .5
26 .5~30 .0
26 .5~30 .0
30 .0 ~33.0
30 .0 ~33.0
33.0 ~36 .0
37.5~4 0 .0
19 .5~22.5
21.0 ~24 .0
23.5~26 .5
23.5~26 .5
26 .5~30 .0
30 .0 ~33.0
33.0 ~36 .0
35.5~38 .0
MEDIUM VOLTAGE CABLE ACCESSORIES
26 / 35 ( 4 0 .5) kV
(GB )
Size 3
Dia.over
Insulation
(mm)
For cables manufactured to specifications other than GB and IEC standards, please contact our local sales representative to
better assist your selection.
Duyen Ha Power Equipment Co.,Ltd
39
There are various options for cables with different type of metallic shields.
The Voltage Detection (VD) function can be also equipped in response to customer's demands.
R P IT-1-x x x x-T
R P IT-1-x x x x-W
R P IT-1-x x x x-V D -T
R P IT-1-x x x x-V D -W
F or c ables w ith copper tape sc reen
F or c ables w ith copper w ire sc reen
W ith voltage detec tor, for c ables w ith copper tape sc reen
W ith voltage detec tor, for c ables w ith copper w ire sc reen
Inne r C o ne B ushing
up to 52 k V 12 5 0 A
C a pa c itive vo lta g e ta pe o f bushing w ith te st po int
Size
2 (800A)
3 (1250A)
C apac itive voltage tap
8 ± 2 pF
8 ± 2 pF
D im e nsio n
Size
2 (800A)
3 (1250A)
A
B
C
50
14 0
14
58
218
12.5
MEDIUM VOLTAGE CABLE ACCESSORIES
Insulate d c a p
40
D im e nsio n
Size
2 (800A)
3 (1250A)
A
B
C
38
131
10 2
54
20 0
130
Duyen Ha Power Equipment Co.,Ltd
Insulate d so c ke t
D im e nsio n
2#
RPIT-2-IS
3#
RPIT-3-IS
A
B
C
20 0
132
10 2
235
16 0
130
C ha ra c te ristic
Item
A C voltage w ithstand
P artial D isc harge
B IL
9 5 kV, 1 m in
4 5 kV, < 10 pC
20 0 kV
Insta llatio n To o ls
Metal tool case including an easy to handle compression tool for wedge and contact ring and all necessary adaption rings.
R e late d te st re po rts
Reference No.
Voltage (kV)
Specification
C T 10 -128 1
C T 11-170 0 -1/ 2/ 3
C T 11-2739 -1 & 2
C T 11-38 28 -1 & 2
20 11J D L 4 73
20 11J D L 570
52
52
52
42
42
42
G B / T 1270 6 .4 -20 0 8
IE C 6 0 50 2.4 -20 0 5
Duyen Ha Power Equipment Co.,Ltd
MEDIUM VOLTAGE CABLE ACCESSORIES
Size
41
ABOUT TE CONNECTIVITY
TE C o nne c tivity (N Y S E: TEL)
is a $13 billion w orld le ade r in c o nne c tivit y.
T he c ompa ny designs and manu factu res products at the heart of elect ronic
c o nn ec tio ns f or th e w o r ld ’ s leading ind u s tries incl u di ng a u to moti v e ,
ene rgy and indu s trial, b ro adband c ommunic a ti o ns , c o ns u mer d e vi c es ,
hea lthca re, an d ae rosp a c e an d de fens e. TE C on nectivity ’ s lon g- sta ndi ng
c ommitm ent to inn ovatio n and engin eering exc ell en c e helps its cu stom ers
sol ve the need for mo re ene rgy
c ienc y, al way s-on c ommuni c atio ns and
ev er-inc re a si ng p roductivit y. W it h ne a rly 9 0 ,0 0 0 empl oy ee s in ov e r 5 0
c ountries , TE C on nec tivity m akes c on nections the w orld relies o n to w or k
fl awle ssly every d ay. To c onnect with the c ompan y, visit: ww w.TE .c om.
W hile TE C onnec tivity ( TE ) ha s m ade every reaso nabl e e ort to ensu re the acc urac y of the inform ation in this c atalog, T E does not guaran tee that it is er ror -f ree, nor do es TE m ake any oth er
represen tation, war ran ty or gua rantee th at the infor m ation is acc urate, cor rect, reliable or cu rrent. T E rese rves th e right to ma ke any adj ustm en ts to the inform ation con taine d herein at any
time w ithou t notice. TE exp ressly dis c laims all impli ed war ran ties rega rding the inform ation contained herein, includi ng, but not limi ted to, any impli ed warranties of m erchan tability or fitn ess
for a pa rticu lar pu rpose. T he dim en sio ns in this c atalog are for referen ce purposes only and are subject to c hang e wit hout noti ce. S pec ifi c atio ns are subj ec t to chan ge w ithou t noti ce. C onsult
TE for t he l atest dim en si on s and d esign sp ec ifi c atio ns. R ayche m, R ayc hem (log o), T E C onn ectivity and T E connectivity (log o) a re t radem ar ks .
T E E ne rg y – innova ti ve and e c o no m ic a l s o lutio ns fo r the e le c trical p ow er indu stry: cable a cc e ssories, c onnec to rs & fi tting s ,
ins ul ators & in sul ation, s urge a rresters, sw itc hing eq uipment, street lighting, pow er measurement and cont rol .
SHANGHAI OFFICE
TE Shanghai Technology
P ark - South Building
N o. 3 0 7, Qin Jiang R oad,
Caohejing Hi-Tech P ark
Shanghai 200233 P. R. of
China
Tel: +86- 0 21-6 106 7000
F ax: +86- 0 21-6 4 9 56686
Tyc o Elect ronics Japan G.K.
Ene rgy Division
3816 Nobori to, Tama- ku,
K aw asaki, K anagaw a, 2148 533, Japan
Tel: 81-44-900-5106
F ax: 81-44-900-5144
C ell: 81-80 -34 17-8 9 0 1
C ontact P erson : Nobuo
W atanabe
Tyc o E le c tronics R aychem
K o rea L td.
5th.Fl.,Seocho Bldg, 136510 Seocho-Dong, SeochoK u, Seoul, K orea 13 7-0 70
Tel. +82-2 -34 15-46 27
F ax. + 82-2-3486 -1788
Mobile: +82-10- 8 988-46 27
c ontact person: Yeon Soo Jung
Duyen Ha Power Equipment Co.,Ltd
Hotline: 0904 280 272 / 0972 280 272
Website: dienlucduyenha.com.vn
TE C onnectivity HK
Limi ted
R oom 6 15-62 0 , 6 / F,
N o. 1 Hung To R oad,
K wun Tong, K owloon.
Tel: +8 52- 2790 9625
F ax: +8 52- 2735 48 27
C ontact P erson: K ester
Shum, Nelson L ee
Tyc o Elect ronics Singapore
P te L td
N o.26 Ang Mo Kio Industrial
P ark 2 Singapo re 5 6 9 50 7
Tel: +656 59051 57 (Raychem)
Tel: +656 5905151 ( Cromp ton)
F ax: +6564818254
C ontact person: Mr. Senjaya
Halim
C ontact person: Mr. Anthony
Ho C.K. ( C romp ton Asia)
TE Connectivity Vietnam
Duyen Ha Power Equipment Co.,Ltd
Ngu Hiep ward, Thanh Tri
District, Hanoi City.
Tel: +844 3 682 5517
Fax: +844 3 682 5517
Mobile: 0904.28.02.72
Contact: Mr. Pham Van Ha
Email: dienlucduyenha@gmail.com