KR 35 R1840-3 HW
CYBERTECH-2
KR
Family
Product
the
of
Robots
1:
Fig.
Workspace graphic
Technical data
Footprint
Weight
± 0.03 mm
6
Floor;
Ceiling;
Wall;
Desired angle
370 mm x 380 mm
approx. 244 kg
view
side
envelope,
Working
2:
1840 mm
35 kg
47 kg
-
Fig.
Maximum reach
Rated payload
Maximum payload
Maximum supplementary load, rotating
column / link arm / arm
Pose repeatability (ISO 9283)
Number of axes
Mounting position
Payload diagram
Axis data
diagram
Payload
3:
±185 °
-185 ° / 65 °
-120 ° / 178 °
±180 °
±180 °
±358 °
Fig.
Motion range
A1
A2
A3
A4
A5
A6
Speed with rated payload
A1
A2
A3
A4
A5
A6
180 °/s
180 °/s
200 °/s
400 °/s
390 °/s
420 °/s
Mounting flange
Operating conditions
Ambient temperature during operation
The KR 35 R1840-3 HW is designed for a rated payload of 35 kg in order to
optimize the dynamic performance of the robot. With reduced load center distances and favorable supplementary loads, a maximum payload of up to 47 kg
can be mounted. The specific KUKA Load case must be verified using KUKA.
For further consultation, please contact KUKA Service.
0 °C to 45 °C (273 K to 318 K)
Protection rating
Protection rating (IEC 60529)
Protection rating, robot wrist (IEC
60529)
IP54
IP67
Controller
Controller
KR C5
Certificates
flange
Mounting
4:
NRTL/CE/CR
Fig.
Certificates
Details provided about the properties and usability of the products are purely for information purposes and do not constitute a guarantee of these characteristics. The extent of goods delivered
and services performed is determined by the subject matter of the specific contract. No liability accepted for errors or omissions.
0000-450-972 / V1.1 / 11.03.2025 / en
KUKA Deutschland GmbH Zugspitzstrasse 140, 86165 Augsburg, Germany. Tel.: +49 821 797-4000, www.kuka.com