I recommend reviewing the RAM Memory
Using these steps requires you to restart your computer, so make sure to save any files
you may have open and close any running applications before proceeding. Here goes:
1.- Open Control Panel.
2.- Click on System and Security.
3.- Click on Administrative Tools.
4.- Double-click the Windows Memory Diagnostic shortcut. A quick tip: Alternatively, you
can also use the Windows key + R keyboard shortcut, type mdsched.exe, and click OK
to launch the tool.
5.- Click the Restart now and check problems option.
I would recommend you to check your Hard Disk with chkdsk.
1) On your keyboard, press the Windows logo key and S key at the same time, then
type cmd in the search box.
2) Right-click Command Prompt, then select Run as administrator.
3) Type chkdsk /f /r, then press Enter on your keyboard.
4) Press Y on your keyboard.
5) Press the Windows logo key and R at the same time, then type mdsched.exe.
6) Click Restart now and check for problems (recommended). Your PC will restart
immediately.
7) Wait for the scans to finish.
The error 0xe0000008 may also be caused due to 100% usage of the virtual memory.
This additional memory is a section of the hard disk that has been configured to
simulate the RAM of a computer system. Follow these steps to increase virtual RAM
and see if it helps:
Press Win+I to open the Settings page. Type performance in the Search bar in the top
left corner. Results will pop up in real time. Click on Adjust the appearance and
performance of Windows.
Performance Options window will appear. Switch to the Advanced tab. Click on
the Change button under the Virtual memory section.
Virtual Memory popup will appear. Look in the Total paging file size for all
drives section at the bottom. If the currently allocated memory is significantly less than
the recommended memory, deselect the Automatically manage paging file size for
all drives option on top of the popup window. Then select the Custom Size option,
enter the recommended value in the Initial size field, and a larger value in
the Maximum size field. Click on the Set button. Next, click on OK to save changes.