- No category
ISODRAFT Symbol Key Reference Manual
advertisement
Symbol Key Reference Index Page 1 of 9 Reference Manual ISODRAFT 12 Series Chapter: Symbol Keys Symbol Key Reference Index This section lists all available symbol keys (SKEYs) in alphabetic order. Cross-references are given to the generic component types (GTYPEs) under which you will find them described in the preceding sections of this appendix (if appropriate). Each SKEY has an indication of whether or not it may be redefined, as explained in the ISODRAFT User Guide, Section 11.1, The Basic Principles. For components which include spindles, the standard spindle type associated with the predefined SKEY is indicated, see the ISODRAFT User Guide Section 11.3, Special Keys, for illustrations of these spindle types. SKEY GTYPE COMPONENT USER DEFINABLE? SPINDLE TYPE AR** VALV Angled Pressure Reducing Valve Yes 09SP AV** VALV Angled Valve Yes 01SP AX** VALV Angled Relief Valve or Vent Yes 02SP BA** PCOM Angle Block Yes BEFL BEND Flanged Bend No BO** PCOM Offset Block Yes BR** PCOM Return Block Yes BTFL BEND Flanged Bend with Tee No BU+D BEND Pulled Return Bend No BUFL BEND Flanged Return Bend No C3** INST 3-Way Control Valve No 13SP C4** INST 4-Way Control Valve No 13SP CA** INST Angled Control Valve Yes 13SP CEBW COUP Butt Weld Elbolet Yes CESC COUP Screwed Fitting Elbolet Yes CESW COUP Socket Weld Elbolet Yes CH** PCOM Hose Coupling Yes CK** VALV Check Valve Yes COCP COUP Compression Fitting Coupling Yes COSC COUP Screwed Fitting Coupling Yes COSW COUP Socket Weld Coupling Yes mk:@MSITStore:C:\AVEVA\Plant\PDMS12~1.SP4\DOCUME~1\ISORM.chm::/ISO... 9/20/2022 Symbol Key Reference Index Page 2 of 9 CPBW REDU Butt Weld Concentric Reducer Yes CPCF COUP Centre Flange Yes CPFL REDU Flanged Concentric Reducer Yes CPWP COUP Watertight Bulkhead and Deck Yes CPWT COUP Welded Sleeve thru Pipe Yes CPWW COUP Welded Sleeve thru Pipe Yes CRBW CROS Butt Weld Cross No CRCP CROS Compression Fitting Cross No CRFL CROS Flanged Cross No CRRF CROS Set On Reinforced Cross No CRSC CROS Screwed Fitting Cross No CRSO CROS Set On Cross No CRSW CROS Socket Weld Cross No CSBW REDU Butt Weld Concentric Reducer Yes CSFL REDU Flanged Concentric Reducer Yes CTBW REDU Butt Weld Concentric Reducer with Tee Yes CTFL REDU Flanged Concentric Reducer with Tee Yes CTSC REDU Screwed Fitting Concentric with Tee Yes CTSW REDU Socket Weld Concentric Reducer with Tee Yes CV** INST Control Valve Yes CXBW REDU Butt Weld Concentric Reducer with Tee Yes CXFL REDU Flanged Concentric Reducer with Tee Yes CZBW REDU Butt Weld Concentric Reducer with Tee Yes CZFL REDU Flanged Concentric Reducer with Tee Yes DR INST Rupture Disc Yes EBSC ELBO Screwed Fitting (Male) Elbow No 13SP mk:@MSITStore:C:\AVEVA\Plant\PDMS12~1.SP4\DOCUME~1\ISORM.chm::/ISO... 9/20/2022 Symbol Key Reference Index Page 3 of 9 ELBW ELBO Butt Weld Elbow No ELCP ELBO Compression Fitting Elbow No ELSC ELBO Screwed Fitting Elbow No ELSW ELBO Socket Weld Elbow No EPBW REDU Butt Weld Eccentric Reducer Yes EPFL REDU Flanged Eccentric Reducer Yes ER** ELBO Reducing Elbow No ESBW REDU Butt Weld Eccentric Reducer Yes ESFL REDU Flanged Eccentric Reducer Yes ETBW ELBO Butt Weld Elbow with Tee No ETCP ELBO Compression Fitting Elbow with Tee No ETSC ELBO Screwed Fitting Elbow with Tee No ETSW ELBO Socket Weld Elbow with Tee No EUBW ELBO Butt Weld Return Elbow No EX** PCOM Expansion Bellows Yes EXBW REDU Butt Weld Eccentric Reducer with Tee Yes EXFL REDU Flanged Eccentric Reducer with Tee Yes EZBW REDU Butt Weld Eccentric Reducer with Tee Yes EZFL REDU Flanged Eccentric Reducer with Tee Yes FA** FILT Angled Filter Yes FI** FILT Straight-Through (In-Line) Filter Yes FLBL FLAN Blind or Blanking Flange Yes FLBL FBLI Blind or Blanking Flange Yes FLFL FLAN Flared Flange Yes FLLB FLAN Loose Backing Flange Yes FLOR ATTA Floor Penetration Type ATTA Yes Flow Arrow Yes FLOW mk:@MSITStore:C:\AVEVA\Plant\PDMS12~1.SP4\DOCUME~1\ISORM.chm::/ISO... 9/20/2022 Symbol Key Reference Index Page 4 of 9 FLRC FLAN Reducing Flange Yes FLRC FBLI Reducing Flange Yes FLRE FLAN Eccentric Reducing Flange Yes FLRE FBLI Eccentric Reducing Flange Yes FLRG LJSE Lap Joint Ring No FLSC FLAN Screwed Fitting Flange Yes FLSE LJSE Lap Joint Stub End No FLSJ FLAN Slip-on J-Type Welded Flange Yes FLSO FLAN Slip-on Flange Yes FLSW FLAN Socket Weld Flange Yes FLWN FLAN Weld Neck Flange Yes FO** FILT Offset Filter Yes FOSO FLAN Slip-on Flange with Orifice Yes FOWN FLAN Weld Neck Flange with Orifice Yes FPFL FTUB Fixed Length Pipe with Flanged Ends No FPPL FTUB Fixed Length Pipe with Plain Ends Yes FR** FILT Return Filter No FT** PCOM Flame Trap Yes FX** PCOM Flexible Hose Yes FY** FILT ‘Y’-type Filter/Strainer Yes H3** INST 3-Way Control Valve No 12SP H4** INST 4-Way Control Valve No 12SP HA** INST Angled Control Valve Yes 12SP HC** OLET Screwed Half Coupling Yes HC** OLET Socket Weld Half Coupling Yes HV** INST Control Valve Yes IA** INST Angled Instrument Yes IDFL INST Flanged Instrument with Dial No IDPL INST Instrument with Dial No 12SP mk:@MSITStore:C:\AVEVA\Plant\PDMS12~1.SP4\DOCUME~1\ISORM.chm::/ISO... 9/20/2022 Symbol Key Reference Index Page 5 of 9 II** INST Instrument Yes IO** INST Offset Instrument Yes IR** INST Return Instrument No ITFL OLET Flanged Instrument Tee No KABW CAP Butt Weld Cap Yes KACP CAP Compression Fitting Cap Yes KASC CAP Screwed Fitting Cap Yes KASW CAP Socket Weld Cap Yes L@BW BEND Butt Weld Lobster Back Bend No L@FL BEND Flanged Lobster Back Bend No L@PL BEND Lobster Back Bend No LA** OLET Butt Weld Latrolet Yes LA** OLET Screwed Fitting Latrolet Yes LA** OLET Socket Weld Latrolet Yes M3** INST 3-Way Motorised Valve No M4** INST 4-Way Motorised Valve No MA** INST Angled Control Valve Yes MIBW BEND Butt Weld Mitred Bend No MIFL BEND Flanged Mitred Bend No MIPL BEND Mitred Bend No MTBW BEND Butt Weld Mitred Bend with Tee No MTFL BEND Flanged Mitred Bend with Tee No MTPL BEND Mitred Bend with Tee No MV** INST Motorised Valve Yes NBSC COUP Screwed Nipple Yes NC** PCOM Non-Category Item Yes NC** SHU Non-Category Item Yes NI** OLET Plain End Nipolet Yes NI** OLET Screwed Fitting Nipolet Yes 11SP 11SP 11SP mk:@MSITStore:C:\AVEVA\Plant\PDMS12~1.SP4\DOCUME~1\ISORM.chm::/ISO... 9/20/2022 Symbol Key Reference Index Page 6 of 9 NRSC COUP Screwed Fitting Nipple Yes OP INST Orifice Plate Yes OTBW REDU Butt Weld Eccentric Reducer with Tee Yes OTFL REDU Flanged Eccentric Reducer with Tee Yes OTSC REDU Screwed Fitting Eccentric Reducer with Tee Yes PB+D BEND Pulled Bend No PF CLOS Fixed Length Pipe Block Yes PL PCOM Plug Yes PR INST Restrictor Plate Yes PV CLOS Variable Length Pipe Block Yes RA** INST Angled Relief Valve Yes RBSC REDU Screwed Fitting Concentric Reducing Bush Yes RBSW REDU Socket Weld Concentric Reducing Bush Yes RCBW REDU Butt Weld Concentric Reducer Yes RCCP REDU Compression Fitting Concentric Reducer Yes RCFL REDU Flanged Concentric Reducer Yes RCSC REDU Screwed Fitting Concentric Reducer Yes RCSW REDU Socket Weld Concentric Reducer Yes RD VENT Rupture Disc Yes REBW REDU Butt Weld Eccentric Reducer Yes REFL REDU Flanged Eccentric Reducer Yes RESC REDU Screwed Fitting Eccentric Reducer Yes RF REDU Special Reducing Flange Yes RNSC REDU Nipple Fitting Concentric Reducer Yes RP PCOM Restrictor Plate Yes 02SP mk:@MSITStore:C:\AVEVA\Plant\PDMS12~1.SP4\DOCUME~1\ISORM.chm::/ISO... 9/20/2022 Symbol Key Reference Index Page 7 of 9 RV** INST Relief Valve Yes S3** INST 3-Way Control Valve with Square Indicator No 10SP S4** INST 4-Way Control Valve with Square Indicator No 10SP SA** INST Angled Control Valve with Square Indicator Yes 10SP SB PCOM Spectacle Blind Yes SG** PCOM Sight Glass Yes SK** OLET Socket Weld Sockolet Yes SP PCOM Slip Plate Yes SR PCOM Slip Ring Yes SV** INST Control Valve with Square Indicator Yes SW** OLET Butt Weld Sweepolet Yes T@BW BEND Butt Weld Lobster Back Bend with Tee No T@FL BEND Flanged Lobster Back Bend with Tee No T@PL BEND Lobster Back Bend with Tee No TA** TRAP Angled Trap Yes TB+D BEND Pulled Bend with Tee No TEBW TEE Butt Weld Tee No TECP TEE Compression Fitting Tee No TEFL TEE Flanged Tee No TERF TEE Reinforced Tee No TESC TEE Screwed Fitting Tee No TESO TEE Set On Tee No TESW TEE Socket Weld Tee No TH** OLET Screwed Fitting Thredolet Yes TI** TRAP In-line Trap Yes TO** TRAP Offset Trap Yes TPUL TEE Pulled Tee No 10SP mk:@MSITStore:C:\AVEVA\Plant\PDMS12~1.SP4\DOCUME~1\ISORM.chm::/ISO... 9/20/2022 Symbol Key Reference Index Page 8 of 9 TR** TRAP Return Trap No TSBW TEE Butt Weld Swept Tee No TSCP TEE Compression Fitting Swept Tee No TSFL TEE Flanged Swept Tee No TSSW TEE Socket Weld Swept Tee No TU** PCOM Tundish or Funnel Yes TUBE FTUB Fixed Length Pipe - to be displayed and stretched, like implied tube on an isometric Yes UNIV PCOM Universal Skey for special fittings Yes See ISODRAFT User Guide UNSC UNIO Screwed Fitting Union Yes UNSW UNIO Butt or Socket Weld Union Yes V3** VTWA 3-Way Valve No 01SP V4** VFWA 4-Way Valve No 01SP VB** VALV Ball Valve Yes 03SP VC** VALV Check Valve Yes VD** VALV Diaphragm Valve Yes 01SP VG** VALV Globe Valve Yes 01SP VK** VALV Cock Valve Yes 03SP VN** VALV Needle Valve Yes 06SP VP** VALV Plug Valve Yes 07SP VR** VALV Relief Valve Yes 02SP VS** VALV Slide Valve Yes 08SP VT** VALV Gate Valve Yes 05SP VV** VALV Basic Valve Yes 01SP VX** VALV Pressure Reducing Valve Yes 09SP VY** VALV Butterfly Valve Yes 03SP WF WELD Field Fitted Weld No WS WELD Site Weld No WT** OLET Weldolet Yes mk:@MSITStore:C:\AVEVA\Plant\PDMS12~1.SP4\DOCUME~1\ISORM.chm::/ISO... 9/20/2022 Symbol Key Reference Index Page 9 of 9 WW WELD Shop Weld No X@** CROS Generic Y-type Cross with user-definable out- and offlegs Yes XA** INST Angled Pressure Reducing Valve Yes 09SP XV** INST Pressure Reducing Valve Yes 09SP Y@** TEE Generic Y-type Tee with userdefinable out- and off- legs Yes Hanger (As a basis for userdefined hangers; see ISODRAFT User Guide, Section 10.4, Defining a New Hanger) Yes 01HG Note ** denotes any of the following connection types: @ BW Butt Weld CP Compression Fitting FL Flange SC Screwed Fitting SW Socket Weld PL Plain in Bends, denotes the number of bend segments (range 1-9) in X-type and Y-type Crosses/Tees, replaced by an integer in the range 1 to 4, 1 indicating the largest bore, 4 indicating the smallest bore. + denotes the ratio of the bend radius to the pipe bore (range 1-9) Copyright 1974 to current year. AVEVA Solutions Limited and its subsidiaries. All rights reserved. mk:@MSITStore:C:\AVEVA\Plant\PDMS12~1.SP4\DOCUME~1\ISORM.chm::/ISO... 9/20/2022
0
advertisement
Download
advertisement
Add this document to collection(s)
You can add this document to your study collection(s)
Sign in Available only to authorized usersAdd this document to saved
You can add this document to your saved list
Sign in Available only to authorized users