Pikka Development Project
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL &
INSTRUMENT CABLE - WEA
Document number – STP-QAMRB-000027
Rev A
4/26/2024 – Issued for Review
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
STP-QAMRB-000027 – REV A
DOCUMENT CONTROL
The controlled copy of this document can be accessed from the Electronic Santos Alaska Project Document
Management System – Aconex. Printed copies are not controlled.
REVISION HISTORY
REV
Date
A
26 Apr 2024
Issued for Review
Originator
Checked
Approved
J. EBORA
J. KEE
V. TOH
Click here to
enter a date.
CHANGE LOG
REV
CHANGE
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
STP-QAMRB-000027 – REV A
PREFACE
The use by consultants, contractors, or suppliers of this Radiography Examination Procedure for Structure does
not relieve them of any responsibility whatsoever for the quality of design, materials, and workmanship that they
have been engaged to provide.
If Santos consultants, contractors or suppliers have any doubt as to the relevant Radiography Examination
Procedure for Structure to use, then they must consult Santos. However, they will always remain responsible for
the use of the most appropriate Radiography Examination Procedure for Structure to meet specific facility criteria
or contractual requirement.
Santos grants the right to use these Radiography Examination Procedure for Structure to Santos’s consultants,
contractors and suppliers who are contractually authorized to do so and to any related party who are contractually
required to comply with them.
Any requests to deviate from the requirements of this Radiography Examination Procedure for Structure must be
submitted in writing for resolution by Santos.
DISCLAIMER
Santos disclaims any liability of whatsoever nature for any damage (including injury or death) suffered by any
company or person whomsoever as a result of or in connection with the use, application, or implementation of any
Radiography Examination Procedure for Structure, combination of Radiography Examination Procedure for
Structure or any part thereof contained in this document.
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
STP-QAMRB-000027– REV A
Table of Contents
1
Introduction ...................................................................................................................................... 5
1.1
Purpose .............................................................................................................................................. 5
1.2
Scope ................................................................................................................................................. 5
2
Definition and Abbreviation ............................................................................................................ 5
2.1
Definitions ........................................................................................................................................... 5
2.2
Abbreviations ...................................................................................................................................... 6
2.3
Codes and Standards......................................................................................................................... 6
3
Manufacturing Record Book ........................................................................................................... 7
3.1
Attachment – Manufacturing Record Book (MRB).............................................................................. 7
3.2 Material Test Certificates - Electrical & Instrument Cable - WEA………………………………….....…........8
3.3 Certificate of Compliance - Electrical & Instrument Cable - WEA……………………………..…………......43
3.4 Certificate of Origin - Electrical & Instrument Cable - WEA………………………………..…………............50
3.5 ISO 9001 Certificate - Electrical & Instrument Cable - WEA…………………………………………............54
3.6 Type Test Report - Electrical & Instrument Cable - WEA……………………………………………….........60
3.7 Catalogue of Product - Electrical & Instrument Cable - WEA…………………………………………...........68
3.8 Datasheet (Power & Control Cable) - Electrical & Instrument Cable - WEA…………………………..........87
3.9 Datasheet (Instrument Cable) - Electrical & Instrument Cable - WEA………………………………..........117
4.0 Inspection Test Plan - Electrical & Instrument Cable - WEA…………………………………………..........126
4.1 Installation, Operating & Maintenance Manual - Electrical & Instrument Cable - WEA…………….........134
4.2 Preservation, Packing and Storage Procedure - Electrical & Instrument Cable - WEA…………….........210
4.3 Packing and Shipping Schedule/List - Electrical & Instrument Cable - WEA………………………..........216
4.4 Manufacturer Record Book Index - Electrical & Instrument Cable - WEA…………………………...........238
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
STP-QAMRB-000027 – REV A
1
Introduction
1.1
Purpose
The purpose of this document describes how to compile for steel structure and piping of records
and procedures for fabrication of topside module components into fabrication Records Book.
1.2
Scope
The scope of this document it contains generic listing of information deliverable requirements
which describes the index of all quality inspection (data, records, and documents) relevant
project procedures involved with fabrication of Topside Modules for Pikka Development Project.
2
Definition and Abbreviation
2.1
Definitions
The following terminology is used in this document:
Table 2-1: Definition Table
Term
Definition
Owner
Santos Alaska or its designated representatives.
Owner Representative
An inspector, vendor, manufacturer, or inspection agency
contracted by the Owner to represent the Owner.
Supplier
Entity entering a contract with Company to provide
materials, goods, supplies, equipment and plant and
includes the successors and (or) permitted assigns of such
entity
Work Processes
Include PMT or Contractor activities, plans and procedures
used to generate
work products
Manufacturing Record Book (MRB)
A collection of quality-related documents including
material test certificates, quality control (QC)/inspection and
test plans (ITPs), inspection and
test records, QC records, as well as other quality related
documents.
Document
Document and Drawing
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
STP-QAMRB-000027 – REV A
2.2
Abbreviations
The following abbreviations are used in this document:
Table 2-2: Abbreviation Table
Abbreviation
2.3
Detail
DS
Data Sheet
IOM
Installation, Operating & Maintenance Manual
IFA
Issued for Review
DO
Delivery Order
MRB
Manufacturing Record Book
ITP
Inspection and Test Plan
IRN
Inspection Release Note
MTC
Material Test Certificate
NA
Not Applicable
PO
Purchase Order
PL
Packing List
QC
Quality Control
Codes and Standards
The following codes, standards, and specifications shall be considered as a part of this
specification. All documents shall be the latest editions in force.
All questions regarding this specification or discrepancies between this specification and the
design drawings or purchase documents shall be referred to Owner for clarification.
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
STP-QAMRB-000027 – REV A
Table 2-3: Codes and Standards Table
Codes and Standards
Santos Specifications
V-VME-STP-QA-0-000317
Material Test Certificates - Electrical & Instrument Cable
V-VME-STP-QA-0-000310
Certificate of Compliance - Electrical & Instrument Cable
V-VME-STP-QA-0-000312
Certificate of Origin - Electrical & Instrument Cable
V-VME-STP-QA-0-000315
Type Test Report - Electrical & Instrument Cable
V-VME-STP-EE-0-000025
Catalogue of Product - Electrical & Instrument Cable
V-VME-STP-EE-0-000024
General Arrangement & Technical Data Sheet of Cables (Power &
Control Cable) - Electrical & Instrument Cable
V-VME-STP-IC-0-000042
General Arrangement & Technical Data Sheet of Cables Datasheet
(Instrument Cable) - Electrical & Instrument Cable
V-VME-STP-QA-0-000309
Inspection Test Plan - Electrical & Instrument Cable
V-VME-STP-OP-0-000052
Installation, Operating & Maintenance Manual - Electrical &
Instrument Cable
V-VME-STP-QA-0-000311
Preservation, Packing and Storage Procedure - Electrical &
Instrument Cable
V-VME-STP-QA-0-000319
Packing and Shipping Schedule/List - Electrical & Instrument Cable
V-VME-STP-EE-0-000026
Manufacturer Record Book Index - Electrical & Instrument Cable
Insert Other Standards in the format above such as ASME, ASTM, International Standards,
V-VME-STP-QA-0-000313
ISO 9001 Certificate - Electrical & Instrument Cable
3
Manufacturing Record Book
3.1
Attachment – Manufacturing Record Book (MRB)
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
PIKKA DEVELOPMENT PROJECT STANDALONE STP FACILITY
COMPANY DOC NO.
STP-QAMRB-000027
CONTRACTOR DOC NO.
V-VME-STP-EE-0-000026 / 200177-VME-EL-LS-035000
MANUFACTURER RECORD BOOK INDEX - ELECTRICAL & INSTRUMENT CABLE - WEA
DOCUMENT TITLE
CONTRACT / PO. NO.
NO
Document Description
Document Numbering
Rev.
Page
of
SECTION
A
Material Test Certificates - Electrical & Instrument Cable - WEA
V-VME-STP-QA-0-000317
A
1
34
B
Certificate of Compliance - Electrical & Instrument Cable - WEA
V-VME-STP-QA-0-000310
1
1
6
C
Certificate of Origin - Electrical & Instrument Cable - WEA
V-VME-STP-QA-0-000312
1
1
3
D
ISO 9001 Certificate - Electrical & Instrument Cable - WEA
V-VME-STP-QA-0-000313
1
1
5
E
Type Test Report - Electrical & Instrument Cable - WEA
V-VME-STP-QA-0-000315
1
1
7
F
Catalogue of Product - Electrical & Instrument Cable - WEA
V-VME-STP-EE-0-000025
A
1
18
G
General Arrangement & Technical Data Sheet of Cables (Power & Control Cable) - Electrical & Instrument Cable - WEA
V-VME-STP-EE-0-000024
1
1
29
H
General Arrangement & Technical Data Sheet of Cables (Instrument Cable) - Electrical & Instrument Cable - WEA
V-VME-STP-IC-0-000042
0
1
8
I
Inspection Test Plan - Electrical & Instrument Cable - WEA
V-VME-STP-QA-0-000309
1
1
7
J
Installation, Operating & Maintenance Manual - Electrical & Instrument Cable - WEA
V-VME-STP-OP-0-000052
A
1
75
K
Preservation, Packing and Storage Procedure - Electrical & Instrument Cable - WEA
V-VME-STP-QA-0-000311
1
1
5
L
Packing and Shipping Schedule/List - Electrical & Instrument Cable - WEA
V-VME-STP-QA-0-000319
B
1
21
M
Manufacturer Record Book Index - Electrical & Instrument Cable - WEA
V-VME-STP-EE-0-000026
A
1
3
a On complex systems, suppliers shall use sub-section or higher-level groupings
to suit their own products.
NOTES:
b Irrelevant sections shall be indicated with N/A in the page column. Products
that have many N/A sections shall use a simplified form on a case-by-case basis
with a prior information to Santos.
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-EE-0-000027 – REV A
Material Test Certificates - Electrical & Instrument
Cable - WEA
V-VME-STP-QA-0-000317
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
Pikka Development Project
Material Test Certificates - Electrical & Instrument Cable - WEA
Document number – V-VME-STP-QA-0-000317
Rev A
12/7/2023 – Issued for Review
PIKKA DEVELOPMENT PROJECT
MATERIAL TEST CERTIFICATES - ELECTRICAL AND INSTRUMENT CABLE - WEA
V-VME-STP-QA-0-000317 – REV A
CONTRACTOR DOC NO.: 200177-VME-QA-CE-035003
SUB-CONTRACTOR DOC NO.:
DOCUMENT CONTROL
The controlled copy of this document can be accessed from the Electronic Santos Alaska Project Document
Management System – Aconex. Printed copies are not controlled.
REVISION HISTORY
REV
Date
A
7/12/23
Issued for Review
Originator
Checked
Approved
J. EBORA
C. TUNG
V.TOH
Click here
to enter a
Click here
to enter a
Click here
to enter a
CHANGE LOG
REV
CHANGE
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
133822
Report No:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
Report Date: 9/29/2023
Register No: 54-5482
Page 1 of 1
Customer:
WHOLESALE ELECTRIC ASIA PTE LTD
Item No:
Customer Order Number: 2300572
Shipping Order No: 189-9119
Code No.: N\A
Product Code: 546-31-3503
2
Or UL Specifications
7X BC GROS PP FILL TAPE
Cable Description: 3/C 10 AWG 7X BC .030 X-OLENE CABLED W/ 3 X 14 AWG
MC-HL
TYPE
600V
OKOSEAL
-40C
.050
ALUM CLX
Manufacturing Spec.: Applicable ICEA And/ Or AEIC And
/
Issued in conjunction with and subject to OKONITE's standard Warranty
Certificate of Compliance:
and Limitation Liability.
named above that the above described materials were duly tested during
the customer
THE OKONITE COMPANY hereby certifiesandto that
the materials meet or exceed the applicable requirements.
manufacture
Quantity Ordered:
Footage
777
1
1
Taken From
Manufacturing Master QC.
Order No.
Length No.
6F7K31L
16-79577
Shipping
Cable QC.
Length No.
Number of Reels:
Quantity Shipped: 777
777
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the following tests:
3.5 kV AC for
5
Minutes
to a constant of
The insulated cable conductor(s) has an INSULATED RESISTANCE of not less than that corresponding
10000 at 15.6ºC.
Ohms per 1000 ft.
1.08
The DC RESISTANCE of the conductor(s) at 25ºC does not exceed !CEA values of
Conductor Continuity PASSED Shield Continuity PASSED
Corona Level ( cables over 3 kV only) N\A
:
:
:
Finished cable PASSED AC Spark Test at 4.5 kV
This report covers material shipped from HOUSTON SERVICE CENTER to:
with orders and
We hereby certify to be true and accurate copy of results of tests conducted in accordance
THE OKONITE COMPANY
specifications listed.
:J. Scfudz
P. Schulz
Form Q123SC REV 3 06/15/20
Service Center Manager
Original signature on file
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
Report No:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
133823
Report Date: 9/29/2023
Register No: 54-5482
Page 1 of
1
Customer: WHOLESALE ELECTRIC ASIA PTE LTD
Code No.: N\A
3
Item No:
Customer Order Number: 2300572
Product Code: 571-31-3191
Shipping Order No: 189-9119
Manufacturing Spec.: Applicable !CEA And I Or AEIC And I Or UL Specifications
Cable Description: 3/C 6 AWG 7X BC C-RD .045 COLORED X-OLENE CABLED W/ 3 X 12 AWG 7X BC GRO PP
FILLERS TAPE ALUM CLX .050 BLK OKOSEAL 600V Hazardous (Classified) Location cable
Certificate of Compliance:
Issued in conjunction
with and subject to OKONITE's standard Warranty and Limitation Liability.
THE OKONITE COMPANY hereby certifies to the customer named above that the above described materials were duly tested during
manufacture
Quantity Ordered:
and that the materials meet or exceed the applicable requirements.
Quantity Shipped:
11821
Number of Reels: 3
11821
Taken From
Cable QC.
Length No.
Manufacturing Master QC.
Shipping
2
Footage
5000
5000
3
1821
1
Length No.
6F7V26
6F7V26
6F7V26
Order No.
16-89511
16-89511
16-89511
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the following tests:
5.5 kV AC for
5
Minutes
The insulated cable conductor(s) has an INSULATED RESISTANCE of not less than that corresponding to a constant of
10000 at 15.6ºC.
The DC RESISTANCE of the conductor(s) at 25ºC does not exceed !CEA values of 0.427 Ohms per 1000 ft.
Conductor Continuity PASSED
:
Shield Continuity
:
PASSED
Corona Level (cables over 3 kV only): N\A
Finished cable PASSED AC Spark Test at 4.5 kV
This report covers material shipped from HOUSTON SERVICE CENTER to:
We hereby certify to be true and accurate copy of results of tests conducted in accordance with orders and
specifications listed.
THE OKONITE COMPANY
:I'. Scftutz
P. Schulz
Service Center Manager
Form Q123SC REV 3 06/15/20
Original signature on file
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
133824
THEOKONITECOMPANY
Report No:
Century Plaza Drive
Houston, TX 77073
Report Date: 9/29/2023
Register No: 54-5482
of
Page
802
1
1
Customer: WHOLESALE ELECTRIC ASIA PTE LTD
Code No.: N\A
5
Item No:
Customer Order Number: 2300572
Product Code: 571-31-3204
Shipping Order No: 189-9119
Manufacturing Spec.: Applicable ICEA And I Or AEIC And I Or UL Specifications
Cable Description: 3/C 2 AWG 7X BC C-RD .045 X-OLENE PRINT CC CABLED W/ 3 X 10 AWG 7X BC GRO PP
FILL TAPE ALUM CLX .050 OKOSEAL 600V Hazardous (Classified) Location cable
Issued in conjunction
Certificate of Compliance:
with and subject to OKONITE's standard Warranty
and Limitation Liability.
THE OKONITE COMPANY hereby certifies to the customer named above that the above described materials
manufacture
Quantity Ordered:
1
Number of Reels:
Quantity Shipped: 537
537
Cable QC.
Length No.
were duly tested during
and that the materials meet or exceed the applicable requirements.
1
Taken From
Manufacturing Master QC.
Order No.
Length No.
6F7Q49A
16-88935
Shipping
Footage
537
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the following tests:
5.5 kV AC for
5
Minutes
The insulated cable conductor(s) has an INSULATED RESISTANCE of not less than that corresponding to a constant of
10000 at 15.6ºC.
The DC RESISTANCE of the conductor(s) at 25ºC does not exceed ICEA values of 0.169 Ohms per 1000 ft.
Conductor Continuity: PASSED
Shield Continuity: PASSED
Corona Level (cables over 3 kV only): N\A
Finished cable PASSED AC Spark Test at
4.5 kV
This report covers material shipped from HOUSTON SERVICE CENTER to:
We hereby certify to be true and accurate copy of results of tests conducted in accordance with orders and
specifications listed.
THE OKONITE COMPANY
:J. Scfiutz
P. Schulz
Form Q123SC REV 3 06/15/20
Service Center Manager
Original signature on file
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
133825
Report No:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
Report Date: 9/29/2023
Register No: 54-5482
Page 1 of 1
Customer: WHOLESALE ELECTRIC ASIA PTE LTD
Code No.: N\A
6
Item No:
Customer Order Number: 2300572
Product Code: 571-31-3216
Shipping Order No: 189-9119
Manufacturing Spec.: Applicable ICEA And / Or AEIC And / Or UL Specifications
Cable Description: 3/C 2/0 AWG 19X BC C-RD .055 X-OLENE PRINT CC CABLED W/ 3 X 10 AWG 7X BC GRD PP
FILL TAPE ALUM CLX .050 OKOSEAL 600V Hazardous (Classified) Location cable
Issued in conjunction
Certificate of Compliance:
with and subject to OKONITE's standard Warranty and Limitation Liability.
THE OKONITE COMPANY hereby certifies to the customer named above that the above described materials were duly
manufacture
1
Number of Reels:
Quantity Shipped: 3178
Quantity Ordered: 3178
Cable QC.
Length No.
tested during
and that the materials meet or exceed the applicable requirements.
Shipping
Footage
3178
1
Taken From
Manufacturing Master QC.
Order No.
Length No.
6F7W11
16-02442
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the following tests:
7 kV AC for
5
Minutes
The insulated cable conductor(s) has an INSULATED RESISTANCE of not less than that corresponding to a constant of
10000 at 15.6ºC.
The DC RESISTANCE of the conductor(s) at 25ºC does not exceed ICEA values of 0.0843 Ohms per 1000 ft.
Conductor Continuity: PASSED
Shield Continuity: PASSED
Corona Level (cables over 3 kV only): N\A
Finished cable PASSED AC Spark Test at 4.5 kV
This report covers material shipped from HOUSTON SERVICE CENTER to:
We hereby certify to be true and accurate copy of results of tests conducted in accordance with orders and
specifications listed.
THE OKONITE COMPANY
fJ. Scfuttz
P. Schulz
Service Center Manager
Form Q123SC REV 3 06/15/20
Original signature on file
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
133826
THE OKONITE COMPANY
Report No:
802 Century Plaza Orive
Report Date: 9/29/2023
Register No: 54-5482
Houston, TX 77073
Page 1 of 1
Customer: WHOLESALE ELECTRIC ASIA PTE LTD
Customer Order Number: 2300572
Item No:
Code No.: N\A
7
Shipping Order No: 189-9119
Manufacturing Spec.: Applicable ICEA And / Or AEIC And / Or UL Specifications
Product Code: 571-31-3224
Cable Description: 3/C 4/0 AWG 19X BC C-RD .055 X-OLENE PRINT CC CABLED W/ 3 X 8 AWG 7X BC C-RD
GRO PP FILL TAPE ALUM CLX .060 OKOSEAL 600V Hazardous (Classified) Location cable
Certificate of Compliance:
Issued
in
conjunction
with and subject to OKONITE's standard Warranty and Limitation Liability.
THE OKONITE COMPANY hereby certifies to the customer named above that the above described materials were duly tested during
manufacture
and that the materials meet or exceed the applicable requirements.
Quantity Ordered: 2720
Cable QC.
Length No.
1
Quantity Shipped: 2720
Number of Reels:
1
Taken From
Manufacturing Master QC.
Order No.
Length No.
15-50871
583785B
Shipping
Footage
2720
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the following tests:
7 kV AC for
5
Minutes
The insulated cable conductor(s) has an INSULATED RESISTANCE of not less than that corresponding to a constant of
10000 at 15.6ºC.
The DC RESISTANCE of the conductor(s) at 25ºC does not exceed ICEA values of 0.053 Ohms per 1000 ft.
Conductor Continuity: PASSED
Shield Continuity
:
PASSED
Corona Level (cables over 3 kV only): N\A
Finished cable PASSED AC Spark Test at 5.5 kV
This report covers material shipped from HOUSTON SERVICE CENTER to:
We hereby certify to be true and accurate copy of results of tests conducted in accordance with orders and
specifications listed.
THE OKONITE COMPANY
:J. Scliutz
P. Schulz
Service Center Manager
Form Q123SC REV 3 06/15/20
Original signature on file
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
THE OKONITE COMPANY
Report No:
802 Century Plaza Drive
133827
Houston, TX 77073
Report Date: 9/29/2023
Register No: 54-5482
Customer: WHOLESALE ELECTRIC ASIA PTE LTD
Customer Order Number: 2300572
Item No:
Page 1 of 1
9
Code No.: N\A
Shipping Order No: 189-9119
Product Code: 267-40-3401
Manufacturing Spec.: Applicable ICEA And/ Or AEIC And I Or UL Specifications
Cable Description: PR #16 ?X BC .030 XOLENE XLP CIC
TWIST WITH #16 65X TC DRAIN WIRE
1
MYLAR/ALUM
TAPE .045 PVC JKT TYPE TC-ER
Certificate of Compliance:
Issued in conjunction
with and subject to OKONITE's standard
Warranty and Limitation Liability.
THE OKONITE COMPANY hereby certifies to the customer named above that the above described materials
manufacture
and that the materials meet or exceed the
applicable requirements.
Quantity Ordered: 40755
Quantity Shipped: 9964
were duly tested during
Number of Reels: 2
Taken From
Cable QC.
Length No.
Shipping
Manufacturing Master QC.
Footage
6524
3440
1
2
Order No.
16-02786
16-02786
Length No.
6TJS62A
6TJS62B1
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the
following tests:
3 kV AC for
5
Minutes
The insulated cable conductor(s) has an INSULATED RESISTANCE
of not less than that corresponding to a constant of
10000 at 15.6ºC.
The DC RESISTANCE of the conductor(s) at 25ºC does not exceed
ICEA values of 4.35
Ohms per 1000 ft.
Conductor Continuity PASSED Shield
Continuity NIA
Corona Level (cables over 3 kV only): N\A
:
:
Finished cable PASSED AC Spark Test at
§
kV
This report covers material shipped from HOUSTON SERVICE
We hereby certify to be true and accurate
specifications listed.
CENTER to:
copy of results of tests conducted in accordance with orders and
THE OKONITE COMPANY
9'. Scftutz
P. Schulz
Form Q123SC REV 3 06/15/20
Service Center Manager
Original signature on file
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
133828
Report No:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
Report Date: 9/29/2023
Register No: 54-5482
Page 1 of 1
LTD
Customer: WHOLESALE ELECTRIC ASIA PTE
Code No.: N\A
Item No:
Customer Order Number: 2300572
Product Code: 267-41-3401
Shipping Order No: 189-9120
/ Or AEIC And / Or UL Specifications
Manufacturing Spec.: Applicable ICEA And
TAPE .045
XLP TWISTED W/#16 AWG 19X TC DRAIN WIRE
Cable Description: 1/TR #16 65X BC .030 X-OLENE
OKOSEAL PVC 600V P-OS TYPE TC-ER
with and subject to OKONITE's standard Warranty
Issued in
and Limitation Liability.
conjunction
Certificate of Compliance:
above described materials were duly tested during
certifies to the customer named above that the
THE OKONITE COMPANY hereby
that the materials meet or exceed the applicable requirements.
manufacture
1
2
Number of Reels: 2
Quantity Shipped: 660
Quantity Ordered: 660
Cable QC.
Length No.
and
Taken From
Manufacturing Master QC.
Order No.
Length No.
6tk740g
16-89122
6tk740g
16-89122
Shipping
Footage
480
180
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the following tests:
1.5 kV AC for
5
Minutes
constant of
RESISTANCE of not less than that corresponding to a
The insulated cable conductor(s) has an INSULATED
10000 at 15.6ºC.
Ohms per 1000 ft.
4.43
does not exceed ICEA values of
The DC RESISTANCE of the conductor(s) at 25ºC
Conductor Continuity: PASSED Shield Continuity:
Corona Level (cables over 3 kV only): N\A
PASSED
Finished cable PASSED AC Spark Test at 4.5 kV
SERVICE CENTER to:
This report covers material shipped from HOUSTON
We hereby certify to be true and accurate copy of
specifications listed.
results of tests conducted in accordance with orders
and
THE OKONITE COMPANY
9'. Scfu&z
P. Schulz
Form Q123SC REV 3 06/15/20
Service Center Manager
Original signature on file
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
THE OKONITE COMPANY
Report No:
802 Century Plaza Drive
133879
Houston, TX 77073
Report Date: 11/9/2023
Register No: 54-5482
Customer: WHOLESALE ELECTRIC ASIA
Customer Order Number: PO 2300572
Page 1 of 1
Item No:
1
Shipping Order No: 189-9135
Manufacturing Spec.: Applicable ICEA And / Or AEIC And / Or UL Specifications
Code No.: N\A
Product Code: 571-22-3838
Cable Description: 3/C 350 MCM 37X BC C-RD SS .115
OKOGUARD .024 SC EPR PHASE ID .005 BC TAPE
CABLE W/ 3 x 6 AWG BC GRO PP FILL TAPE ALUM CLX .075
YELLOW OKOSEAL 5 KV
Certificate of Compliance:
Issued in conjunction
with and subject to OKONITE's standard
Warranty and Limitation Liability.
THE OKONITE COMPANY hereby certifies to the customer named above that the above
manufacture
described materials were duly tested
during
and that the materials meet or exceed the
applicable requirements.
Quantity Ordered: 367
Cable QC.
Length No.
1
Quantity Shipped: 367
Number of Reels:
1
Taken From
Shipping
Manufacturing Master QC.
Footage
Order No.
15-55747
367
Length No.
583998B
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the
following tests:
23 kV AC for
5
Minutes
The insulated cable conductor(s) has an INSULATED RESISTANCE
of not less than that corresponding to a constant of
50000 at 15.6ºC.
The DC RESISTANCE of the
conductor(s) at 25ºC does not exceed ICEA values of 0.032 Ohms per 1000 ft.
Conductor Continuity: PASSED
Shield Continuity: PASSED
Corona Level (cables over 3 kV only): PASSED after
Finished cable PASSED AC Spark Test at
degassing in accordance with AEIC CS8
6.5 kV
This report covers material shipped from HOUSTON SERVICE
CENTER to:
We hereby certify to be true and accurate
copy of results of tests conducted in accordance with orders and
specifications listed.
THE OKONITE COMPANY
ff. Scfiutz
P. Schulz
Service Center Manager
Form Q123SC REV 3 06/15/20
Original signature on file
MADE IN U.S.A.
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
The Okonite Company
2900 South Skyway Drive
Santa Maria, California 93455
Report No. 33510
Date 9/28/2023
Reg. No. 54-5482
Customer:
Page 1 of 1
WHOLESALE ELECTRIC ASIA PTE LTD
Code No N/A
Customer Order Number PO 2300572
Manufacturing Order No.
05-99696
Sales Order No. 015-6110-3
Product Code 112-31-3793
Item No. 3
Specification:
NPF-EESPE-060006 REV 0 6/11/19
Description:
3/C 350-37X BC C-RD, .065 X-OLENE, METH 3 CC, CBLD W/1X #3-7X BC C-RD GRD, FR FILLERS, TAPE, 110
BLK OKOSEAL PVC, SEQ PRINT -- 600 V
CERTIFICATE OF COMPLIANCE: Issued in conjunction with and subject to OKONITE'S Warranty and
Limitation Liability.
THE OKONITE COMPANY hereby certifies to the customer named above that the above described materials
were duly tested during manufacture and the materials meet or exceed the
applicable requirements.
Certified Test Report
The insulated conductor(s) withstood the following tests: 10 kV AC for 5 Minutes
35 kV DC for 1 Minute
The insulated cable conductor(s) has an INSULATION RESISTANCE of not less than that corresponding to a constant of 10,000
megohms-1000ft. at 15.6°C
The DC RESISTANCE of the conductor(s) at 25°C does not exceed ICEA values in Ohms per 1,000 ft of 0.032070
Conductor Continuity: Passed
Corona Level (cables over 3kV ONLY): N/A
This report covers material shipped from Santa Maria to WHOLESALE ELECTRIC ASIA PTE LTD, EXPORT
COUNTRY: KOREA, REPUBLIC OF ,
Finished cable PASSED AC Spark Test at 10 KV
We hereby certify this to be true and accurate copy of the results of tests conducted in accordance with orders and specifications listed.
D. Wright
Engineer of Test
Q123-C-el Rev 13
Quantity Ordered 4605 ft
Number of Reels 2
Quantity Accepted for Shipment 4605 ft
QC Length Number
584129A
Footage
2303
Sequential Top
50002130
Sequential Bottom
50004440
584130A
2302
50008122
50005812
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
The Okonite Company
2900 South Skyway Drive
Santa Maria, California 93455
Report No. 33525
Date 10/3/2023
Reg. No. 54-5482
Customer:
Page 1 of 1
WHOLESALE ELECTRIC ASIA PTE LTD
Code No N/A
Customer Order Number PO 2300572
Manufacturing Order No.
05-99612
Sales Order No. 015-6111-1
Product Code 112-31-3793
Item No. 1
Specification:
NPF-EESPE-060006 REV 0 6/11/19
Description:
3/C 350-37X BC C-RD, .065 X-OLENE, METH 3 CC, CBLD W/1X #3-7X BC C-RD GRD, FR FILLERS, TAPE, 110
BLK OKOSEAL PVC, SEQ PRINT -- 600 V
CERTIFICATE OF COMPLIANCE: Issued in conjunction with and subject to OKONITE'S Warranty and
Limitation Liability.
THE OKONITE COMPANY hereby certifies to the customer named above that the above described materials
were duly tested during manufacture and the materials meet or exceed the
applicable requirements.
Certified Test Report
The insulated conductor(s) withstood the following tests: 10 kV AC for 5 Minutes
35 kV DC for 1 Minute
The insulated cable conductor(s) has an INSULATION RESISTANCE of not less than that corresponding to a constant of 10,000
megohms-1000ft. at 15.6°C
The DC RESISTANCE of the conductor(s) at 25°C does not exceed ICEA values in Ohms per 1,000 ft of 0.032070
Conductor Continuity: Passed
Corona Level (cables over 3kV ONLY): N/A
This report covers material shipped from Santa Maria to WHOLESALE ELECTRIC ASIA PTE LTD, EXPORT
COUNTRY: INDONESIA ,
Finished cable PASSED AC Spark Test at 10 KV
We hereby certify this to be true and accurate copy of the results of tests conducted in accordance with orders and specifications listed.
D. Wright
Engineer of Test
Q123-C-el Rev 13
Quantity Ordered 384 ft
QC Length Number
584063C
Number of Reels 1
Quantity Accepted for Shipment 384 ft
Footage
384
Sequential Top
50020450
Sequential Bottom
50020066
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
THE OKONITE COMPANY
Report No:
802 Century Plaza Drive
133861
Houston, TX 77073
Report Date: 11/1/2023
Register No: 54-5666
Customer: WHOLESALES ELECTRIC ASIA PTE LTD
Customer Order Number: PO2300804
Item
Page 1 of 1
No:
Code No.: N\A
Product Code: 202-10-3219
Shipping Order No: 189-9240
Manufacturing Spec.: Applicable ICEA And I Or AEIC And I Or UL
Specifications
Cable Description: 19/C 14 AWG 7X CC .030
OKONITE-FMR CC CABLED TAPE .060 OKOSEAL SEQ PRINT 600V
TYPE TC
Certificate of Compliance:
Issued in conjunction
with and subject to OKONITE's standard
Warranty and Limitation Liability.
THE OKONITE COMPANY hereby certifies to the customer named above that the above
manufacture
described materials were duly tested
during
and that the materials meet or exceed the
applicable requirements.
Quantity Ordered: 670
Quantity Shipped: 670
Number of Reels:
1
Taken From
Cable QC.
Length No.
Shipping
Manufacturing Master QC.
Footage
670
1
Order No.
17-50002
Length No.
7E6476A
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the
following tests:
4 kV AC for
5
Minutes
The insulated cable conductor(s) has an INSULATED
RESISTANCE of not less than that
corresponding to a constant of
30000 at 15.6ºC.
The DC RESISTANCE of the
conductor(s) at 25ºC does not exceed ICEA values of 2.86
Ohms per 1000 ft.
Conductor Continuity PASSED Shield
Continuity NIA
Corona Level (cables over 3 kV only): N\A
:
:
Finished cable PASSED AC Spark Test at
19 kV
This report covers material shipped from HOUSTON SERVICE
CENTER to:
We hereby certify to be true and accurate
copy of results of tests conducted in accordance with orders and
specifications listed.
THE OKONITE COMPANY
9'. Scftutz
P. Schulz
Service Center Manager
Original signature on file
Form 0123SC REV 3 06/15/20
MADE IN U.S.A.
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
THE OKONITE COMPANY
Report No:
802
Century Plaza Drive
Houston, TX 77073
133862
Report Date: 11/1/2023
Register No: 54-5666
Customer: WHOLESALES ELECTRIC ASIA PTE LTD
Customer Order Number: PO2300804
Item No:
Shipping Order No: 189-9240
Page 1 of 1
2
Code No.: N\A
Product Code: 546-31-3508
Manufacturing Spec.: Applicable ICEA And I Or AEIC And / Or UL
Specifications
Cable Description: 8/C 10 AWG 7X BC .030
X-OLENE CABLED W/ X 10 AWG 7X INS. GRO PP FILL
TAPE
ALUM CLX .050 -40C OKOSEAL 600V TYPE MC-HL
1
Certificate of Compliance:
Issued in conjunction
with and subject to OKONITE's standard
THE OKONITE COMPANY hereby certifies to the customer named above that the above
manufacture
Quantity Ordered:
745
Warranty and Limitation Liability.
described materials were duly tested
during
and that the materials meet or exceed the
applicable requirements.
Quantity Shipped:
745
Number of Reels:
1
Taken From
Cable QC.
Length No.
Shipping
Manufacturing Master QC.
Footage
Order No.
16-83491
745
1
Length No.
6F7922A
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the
following tests:
3.5 kV AC for
5
Minutes
The insulated cable conductor(s) has an INSULATED
RESISTANCE of not less than that
corresponding to a constant of
10000 at 15.6ºC.
The DC RESISTANCE of the
conductor(s) at 25ºC does not exceed ICEA values of 1. 08
Ohms per 1000 ft.
Conductor Continuity PASSED Shield
Continuity PASSED
Corona Level (cables over 3 kV only): N\A
:
:
Finished cable PASSED AC Spark Test at 4.5 kV
This report covers material shipped from HOUSTON SERVICE
CENTER to:
We hereby certify to be true and accurate
copy of results of tests conducted in accordance with orders and
specifications listed.
THE OKONITE COMPANY
:J. Scfud,z
P. Schulz
Service Center Manager
Form Q123SC REV 3 06/15/20
Original signature on file
MADE IN U.S.A.
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
THE OKONITE COMPANY
Report No:
802 Century Plaza Drive
133863
Houston, TX 77073
Report Date: 11/1/2023
Register No: 54-5666
Customer: WHOLESALES ELECTRIC ASIA PTE LTD
Customer Order Number: PO2300804
Item
Page 1 of 1
No:
3
Shipping Order No: 189-9240
Manufacturing Spec.: Applicable ICEA And/ Or AEIC And / Or UL Specifications
Code No.: N\A
Product Code: 202-10-3207
Cable Description: 7/C 14 AWG ?X CC .030 OKONITE-FMR
CC CABLED .045 OKOSEAL SEQ PRINT 600V
TYPE
TC
Certificate of Compliance:
Issued in conjunction
with and subject to OKONITE's standard
Warranty and Limitation Liability.
THE OKONITE COMPANY hereby certifies to the customer named above that the above described
manufacture
materials were duly tested during
and that the materials meet or exceed the
applicable requirements.
Quantity Ordered: 4640
Quantity Shipped: 4640
Number of Reels: 2
Taken From
Cable QC.
Length No.
Shipping
Manufacturing Master QC.
Footage
2100
2540
1
2
Order No.
17-11843
17-11843
Length No.
76251 oc
762510A1A
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the
following tests:
4 kV AC for
5
Minutes
The insulated cable conductor(s) has an INSULATED
RESISTANCE of not less than that corresponding to a constant of
30000 at 15.6ºC.
The DC RESISTANCE of the conductor(s) at 25ºC does not exceed
ICEA values of 2.84
Ohms per 1000 ft.
Conductor Continuity PASSED Shield Continuity N/A
Corona Level (cables over 3 kV only): N\A
:
:
Finished cable PASSED AC Spark Test at
17 kV
This report covers material shipped from HOUSTON SERVICE CENTER
to:
We hereby certify to be true and accurate
copy of results of tests conducted in accordance with orders and
specifications listed.
THE OKONITE COMPANY
9'. Scfud,z
P. Schulz
Service Center Manager
Form Q123SC REV 3 06/15/20
Original signature on file
MADE IN U.S.A.
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
THE OKONITE COMPANY
Report No:
802
Century Plaza Drive
Houston, TX 77073
133864
Report Date: 11/1/2023
Register No: 54-5666
Customer: WHOLESALES ELECTRIC ASIA PTE LTD
Customer Order Number: PO2300804
Item
Page 1 of 1
No:
6
Shipping Order No: 189-9240
Manufacturing Spec.: Applicable ICEA And I Or AEIC And I Or UL Specifications
Code No.: N\A
Product Code: 202-10-3404
Cable Description: 4/C 12 AWG 7X CC .030 OKONITE-FMR
CC CABLE FR PP FILL TAPE .045 OKOSEAL
SEQ
PRINT 600V TYPE TC
Certificate of Compliance:
Issued in conjunction
with and subject to OKONITE's standard
THE OKONITE COMPANY hereby certifies to the customer named above that the above
manufacture
Warranty and Limitation Liability.
described materials were duly tested
during
and that the materials meet or exceed the
applicable requirements.
Quantity Ordered: 340
Quantity Shipped:
340
Number of Reels:
1
Taken From
Cable QC.
Length No.
Shipping
Manufacturing Master QC.
Footage
Order No.
17-14811
340
1
Length No.
763123A
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the
following tests:
4 kV AC for
5
Minutes
The insulated cable conductor(s) has an INSULATED RESISTANCE
of not less than that corresponding to a constant of
30000 at 15.6ºC.
The DC RESISTANCE of the conductor(s) at 25ºC does not
exceed ICEA values of 1. 78
Ohms per 1000 ft.
Conductor Continuity PASSED Shield Continuity N/A
Corona Level (cables over 3 kV only): N\A
:
:
Finished cable PASSED AC Spark Test at
1Z kV
This report covers material shipped from HOUSTON SERVICE CENTER
to:
We hereby certify to be true and accurate
copy of results of tests conducted in accordance with orders and
specifications listed.
THE OKONITE COMPANY
fl. Scfudz
P. Schulz
Service Center Manager
Form Q123SC REV 3 06/15/20
Original signature on file
MADE IN U.S.A.
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
Report Date: 11/1/2023
Register No: 54-5708
of
Page
1
Customer:
133855
Report No:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
WHOLESALES ELECTRIC ASIA PTE LTD
Customer Order Number: PO2300802
Shipping Order No: 189-9245
Item No:
1
Code No.: N\A
Product Code: 202-10-3403
1
Manufacturing Spec.: Applicable !CEA And / Or AEIC And I Or UL Specifications
Cable Description: 3/C 12 AWG 7X CC .030 OKONITE-FMR CABLED TAPE .045 OKOSEAL 600V TYPE TC
Certificate of Compliance:
Issued in conjunction
with and subject to OKONITE's standard Warranty and Limitation Liability.
THE OKONITE COMPANY hereby certifies to the customer named above that the above described materials were duly tested during
manufacture
Quantity Ordered:
and that the materials meet or exceed the applicable requirements.
Cable QC.
Length No.
1
Number of Reels:
Quantity Shipped: 392
392
1
Taken From
Manufacturing Master QC.
Order No.
Length No.
17-80841
762740
Shipping
Footage
392
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the following tests:
4 kV AC for
5
Minutes
The insulated cable conductor(s) has an INSULATED RESISTANCE of not less than that corresponding to a constant of
30000 at 15.6ºC.
Ohms per 1000 ft.
The DC RESISTANCE of the conductor(s) at 25ºC does not exceed ICEA values of 1.78
Conductor Continuity: PASSED
Shield Continuity: N/A
Corona Level (cables over 3 kV only): N\A
Finished cable PASSED AC Spark Test at
1l kV
This report covers material shipped from HOUSTON SERVICE CENTER to:
We hereby certify to be true and accurate copy of results of tests conducted in accordance with orders and
specifications listed.
THE OKONITE COMPANY
:f. Scliutz
P. Schulz
Service Center Manager
Original signature on file
Form 0123SC REV 3 06/15/20
MADE IN U.S.A.
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
Report No:
133856
Report Date: 11/1/2023
Register No: 54-5708
Page 1 of 1
Customer: WHOLESALES ELECTRIC ASIA PTE LTD
Customer Order Number: PO2300802
Shipping Order No: 189-9245
Item No:
Code No.: N\A
Product Code: 112-10-3844
2
Manufacturing Spec.: Applicable ICEA And / Or AEIC And / Or UL Specifications
Cable Description: 3/C 8 AWG 7X BC C-RD .045 OKONITE-FMR PRINT PHASE ID CABLED W/ X 10 AWG
CU
.030 OKONITE FMR GREEN GRO WIRE FR PP FILL TAPE .060 OKOSEAL SEQ PRINT 600V
TYPE TC OPEN WIRING
Certificate of Compliance: Issued in conjunction with and subject to OKONITE's standard Warranty and Limitation Liability.
THE OKONITE COMPANY hereby certifies to the customer named above that the above described materials were duly tested during
-
1
manufacture
and that the materials meet or exceed the applicable
requirements.
Quantity Ordered: 240
Quantity Shipped: 240
Number of Reels:
Taken From
Cable QC.
Length No.
1
Shipping
Manufacturing Master QC.
Order No.
Footage
240
Length No.
762860
17 -84391
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the following tests:
5.5 kV AC for
5
Minutes
The insulated cable conductor(s) has an INSULATED RESISTANCE of not less than that
corresponding to a constant of
30000 at 15.6ºC.
The DC RESISTANCE of the conductor(s) at 25ºC does not exceed ICEA values of 0.706 Ohms
per 1000 ft.
Conductor Continuity: PASSED
Shield Continuity: NIA
Corona Level ( cables over 3 kV only)
:
N\A
Finished cable PASSED AC Spark Test at
5.5 kV
This report covers material shipped from HOUSTON SERVICE CENTER to:
We hereby certify to be true and accurate copy of results of tests conducted in accordance with orders and
specifications listed.
THE OKONITE COMPANY
[ï>. Scfmtz
P. Schulz
Service Center Manager
Form Q123SC REV 3 06/15/20
Original signature on file
MADE IN U.S.A.
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
Report No:
133857
Report Date: 11/1/2023
Register No: 54-5708
Page 1 of 1
Customer: WHOLESALES ELECTRIC ASIA PTE LTD
Customer Order Number: PO2300802
Item No:
Code No.: N\A
5
Shipping Order No: 189-9245
Manufacturing Spec.: Applicable ICEA And I Or AEIC And / Or UL Specifications
Product Code: 112-10-3904
Cable Description: 3/C 2/0 AWG 19X BC C-RD .055 OKONITE-FMR PRINT ID CABLED W/ X 4 AWG 7X BC CRD GRD PP FILL TAPE .080 OKOSEAL 600V TYPE TC SEQ PRINT OPEN WIRING
-
1
Certificate of Compliance:
Issued in conjunction
with and subject to OKONITE's standard Warranty and Limitation
Liability.
THE OKONITE COMPANY hereby certifies to the customer named above that the above described materials were duly tested during
manufacture
Quantity Ordered:
and that the materials meet or exceed the applicable requirements.
732
Quantity Shipped: 732
Number of Reels:
1
Taken From
Cable QC.
Length No.
Shipping
Manufacturing Master QC.
Order No.
14-24171
Footage
732
1
Length No.
481416A
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the following tests:
7 kV AC for
5
Minutes
The insulated cable conductor(s) has an INSULATED RESISTANCE of not less than that
corresponding to a constant of
30000 at 15.6ºC.
The DC RESISTANCE of the conductor(s) at 25ºC does not exceed ICEA values of 0.0877 Ohms
per 1000 ft.
Conductor Continuity PASSED
:
Shield Continuity
Corona Level (cables over 3 kV only)
:
:
NIA
N\A
Finished cable PASSED AC Spark Test at
Z
kV
This report covers material shipped from HOUSTON SERVICE CENTER to:
We hereby certify to be true and accurate copy of results of tests conducted in accordance with orders and
specifications listed.
THE OKONITE COMPANY
9'. Scfudz
P. Schulz
Service Center Manager
Form Q123SC REV 3 06/15/20
Original signature on file
MADE IN U.S.A.
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
THE OKONITE COMPANY
Report No:
802 Century Plaza Drive
133858
Houston, TX 77073
Report Date: 11/1/2023
Register No: 54-5709
Customer: WHOLESALES ELECTRIC ASIA PTE LTD
Customer Order Number: PO2300803
Item No:
Page 1 of 1
Code No.: N\A
1
Shipping Order No: 189-9246
Manufacturing Spec.: Applicable ICEA And / Or AEIC And / Or UL Specifications
Product Code: 112-10-3844
Cable Description: 3/C 8 AWG 7X BC C-RD .045 OKONITE-FMR PRINT
PHASE ID CABLED W/ X 10 AWG CU
.030 OKONITE FMR GREEN GRO WIRE FR PP FILL TAPE .060
OKOSEAL SEQ PRINT 600V
TYPE TC OPEN WIRING
Certificate of Compliance: Issued in conjunction with and subject to OKONITE's standard Warranty and Limitation
Liability.
THE OKONITE COMPANY hereby certifies to the customer named above that the above described materials were
tested
-
1
manufacture
and that the materials meet or exceed the
applicable requirements.
Quantity Ordered: 4147
Quantity Shipped: 4147
duly
Number of Reels:
during
1
Taken From
Cable QC.
Length No.
Shipping
Manufacturing Master QC.
Footage
4147
1
Order No.
Length No.
762862
17 -84391
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the following tests:
5.5 kV AC for
5
Minutes
The insulated cable conductor(s) has an INSULATED RESISTANCE of not less than
that corresponding to a constant of
30000 at 15.6ºC.
The DC RESISTANCE of the conductor(s) at 25ºC does not exceed ICEA values
of 0.706 Ohms per 1000 ft.
Conductor Continuity PASSED Shield Continuity N/A
Corona Level (cables over 3 kV only): N\A
:
:
Finished cable PASSED AC Spark Test at
5.5 kV
This report covers material shipped from HOUSTON SERVICE CENTER to:
We hereby certify to be true and accurate
copy of results of tests conducted in accordance with orders and
specifications listed.
THE OKONITE COMPANY
9'. Scfudz
P. Schulz
Service Center Manager
Form Q123SC REV 3 06/15/20
Original signature on file
MADE IN U.S.A.
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
THE OKONITE COMPANY
Report No:
Century Plaza Drive
Houston, TX 77073
802
133859
Report Date: 11/1/2023
Register No: 54-5709
Page 1 of 1
Customer: WHOLESALES ELECTRIC ASIA PTE LTD
Customer Order Number: PO2300803
Shipping Order No: 189-9246
Item No:
Code No.: N\A
2
Product Code: 112-10-3864
Manufacturing Spec.: Applicable ICEA And/ Or AEIC And / Or UL Specifications
Cable Description: 3/C 4 AWG 7X BC C-RD .045 OKONITE-FMR PRINT ID CABLED W/ X 6 AWG 7X BC C-RD
.045 OKONITE FMR GREEN GRD WIRE FR PP FILL TAPE .080 OKOSEAL SEQ PRINT 600V
TYPE TC OPEN WIRING
Certificate of Compliance: Issued in conjunction with and subject to OKONITE's standard Warranty and Limitation Liability.
THE OKONITE COMPANY hereby certifies to the customer named above that the above described materials were duly tested during
-
1
manufacture
and that the materials meet or exceed the applicable requirements.
Quantity Ordered: 2180
Quantity Shipped: 2180
Number of Reels:
1
Taken From
Cable QC.
Length No.
Shipping
Manufacturing Master QC.
Order No.
17-11371
Footage
2180
1
Length No.
763114A
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the following tests:
5.5 kV AC for
5
Minutes
The insulated cable conductor(s) has an INSULATED RESISTANCE of not less than that corresponding to a constant of
30000 at 15.6ºC.
The DC RESISTANCE of the conductor(s) at 25ºC does not exceed ICEA values of 0.279 Ohms per 1000 ft.
Conductor Continuity PASSED
:
Shield Continuity
:
NIA
Corona Level (cables over 3 kV only): N\A
Finished cable PASSED AC Spark Test at
Z
kV
This report covers material shipped from HOUSTON SERVICE CENTER to:
We hereby certify to be true and accurate copy of results of tests conducted in accordance with orders and
specifications listed.
THE OKONITE COMPANY
9'. Scfud,z
P. Schulz
Service Center Manager
Form Q123SC REV 3 06/15/20
Original signature on file
MADE IN U.S.A.
CERTIFIED TEST REPORT
CERTIFICATE OF COMPLIANCE
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
Report No:
Report Date: 11/1/2023
Register No: 54-5709
of
Page
1
Customer: WHOLESALES ELECTRIC ASIA PTE LTD
Customer Order Number: PO2300803
Shipping Order No: 189-9246
Item No:
133860
1
Code No.: N\A
3
Product Code: 112-10-3904
Manufacturing Spec.: Applicable !CEA And I Or AEIC And I Or UL Specifications
Cable Description: 3/C 2/0 AWG 19X BC C-RD .055 OKONITE-FMR PRINT ID CABLED W/ X 4 AWG 7X BC CRD GRO PP FILL TAPE .080 OKOSEAL 600V TYPE TC SEQ PRINT OPEN WIRING
-
1
Certificate of Compliance:
Issued in conjunction with and subject to OKONITE's standard Warranty and Limitation
Liability.
THE OKONITE COMPANY hereby certifies to the customer named above that the above described materials were duly tested during
manufacture
and that the materials meet or exceed the applicable requirements.
Quantity Ordered: 4874
Cable QC.
Length No.
Quantity Shipped: 4874
1
Taken From
Manufacturing Master QC.
Order No.
Length No.
14-24171
481414A
Shipping
Footage
4874
1
Number of Reels:
CERTIFIED TEST REPORT
The insulated conductor(s) withstood the following tests:
7 kV AC for
5
Minutes
The insulated cable conductor(s) has an INSULATED RESISTANCE of not less than that corresponding to a constant of
30000 at 15.6ºC.
The DC RESISTANCE of the conductor(s) at 25ºC does not exceed ICEA values of 0.0877 Ohms per 1000 ft.
Conductor Continuity PASSED
:
Shield Continuity
:
N/A
Corona Level (cables over 3 kV only): N\A
Finished cable PASSED AC Spark Test at
I
kV
This report covers material shipped from HOUSTON SERVICE CENTER to:
We hereby certify to be true and accurate copy of results of tests conducted in accordance with orders and
specifications listed.
THE OKONITE COMPANY
ff. Scfuda
P. Schulz
Service Center Manager
Form Q123SC REV 3 06/15/20
Original signature on file
MADE IN U.S.A.
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
200177-VME-EL-GN-035000 – REV A
Certificate of Compliance - Electrical &
Instrument Cable - WEA
V-VME-STP-QA-0-000310
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
Pikka Development Project
Certificate of Compliance - Electrical & Instrument Cable - WEA
Document number – V-VME-STP-QA-0-000310
Rev 1
01/12/2024 – Re-Issued for Construction
PIKKA DEVELOPMENT PROJECT
CERTIFICATE OF COMPLIANCE - ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-QA-0-000310 – REV 0
CONTRACTOR DOC NO.: 200177-VME-QA-CE-035000
SUB-CONTRACTOR DOC NO.:
DOCUMENT CONTROL
The controlled copy of this document can be accessed from the Electronic Santos Alaska Project Document
Management System – Aconex. Printed copies are not controlled.
REVISION HISTORY
REV
Date
Originator
Checked
Approved
A
13/10/23
Issued for Review
J. EBORA
J.WONG
V.TOH
0
7/12/23
Issued for Construction
J. EBORA
V. TOH
V.TOH
1
12/01/24
Re-Issued for Construction
J. EBORA
V. TOH
V.TOH
Click here
to enter a
Click here
to enter a
CHANGE LOG
REV
CHANGE
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
CERTIFICATE OF COMPLIANCE
Certificate Number
Report Reference
Issue Date
Issued to:
This is to certify that
representative samples of
20150108-E38916
E38916-19961023
2015-JANUARY-08
OKONITE CO
102 HILLTOP RD
PO BOX 340
RAMSEY NJ 07446
METAL-CLAD CABLE
Type MC-HL Cable in sizes 18 AWG to 2000 kcmil copper
conductor or 12 AWG to 2000 kcmil aluminum conductor,
and corrugated aluminum armor rated 600 V to 2000 V.
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety:
Additional Information:
UL 2225 Standard for Cables and Cable-Fittings For Use In
Hazardous (Classified) Locations
UL 1569 Standard for Metal-Clad Cables,
UL 1581 Standard for Electrical Wires, Cables, and Flexible
Cords and
UL 2556 Standard for Wires and Cables Test Methods.
See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Certification Mark should be considered as being covered by UL's
Certification and Follow-Up Service.
Look for the UL Certification Mark on the product.
Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at www.ul.com/contactus
Page 1 of 1
CERTIFICATE OF COMPLIANCE
Issue Date
20120313 – E60422
E60422 – 2011 May 27
2012 March 13
Issued to:
OKONITE CO
Certificate Number
Report Reference
102 HILLTOP RD
PO BOX 340
RAMSEY, NJ 07446 USA
This is to certify that
representative samples of
Power and Control Tray Cable
Type TC Power and Control Tray Cable.
Have been investigated by UL in accordance with the Standard(s) indicated on
this Certificate.
Standard(s) for Safety:
ANSI/UL 1277, "Electrical Power and Control Tray Cables with Optional
Optical-Fiber Members" and CSA C22.2 No. 239, Control and Instrumentation
Cables.
Additional Information:
See the UL Online Certifications Directory at www.ul.com/database for
additional information
Only those products bearing the UL Listing Mark for the US and Canada should be considered as being covered by UL's
Listing and Follow-Up Service meeting the appropriate requirements for US and Canada.
The UL Listing Mark for the US and Canada generally includes: the UL in a circle symbol with “C” and “US” identifiers:
the word “LISTED”; a control number (may be alphanumeric) assigned by UL; and the product category name
(product identifier) as indicated in the appropriate UL Directory.
Look for the UL Listing Mark on the product.
William R. Carney, Director, North American Certification Programs
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at www.ul.com/contactus
Page 1 of 1
CERTIFICATE OF COMPLIANCE
Certificate Number
Report Reference
Issue Date
Issued to:
This is to certify that
representative samples of
20150601-E137931
E137931-19911126
2015-JUNE-01
OKONITE CO
102 HILLTOP RD
PO BOX 340
RAMSEY NJ 07446-0340
SHIPBOARD CABLE, MARINE
Shipboard Cable, Marine: Multi-conductor Distribution and
Control Cables designated as Type OKO-MARINE all rated
90°C, 100°C or 110°C, 600/1000 V and may also use
aluminum braid armor (A Suffix), bronze armor (B Suffix) or
no armor (U Suffix); Multiple Conductor Signal and
Instrumentation Cables Rated 90°C, 100°C or 110°C,
600/1000 V.
Multi-conductor Signal Cable designated as
Type OKO-MARINE rated 90°C or 110 C, 600 or 1000 V
and may also use aluminum braid armor (A Suffix) bronze
armor (B Suffix) or no armor (U Suffix).
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety:
Additional Information:
UL 1309, "Marine Shipboard Cable."
See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Certification Mark should be considered as being covered by UL's
Certification and Follow-Up Service.
Look for the UL Certification Mark on the product.
Bruce Mahrenholz, Director North American Certification Program
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 1
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-EE-0-000027 – REV A
Certificate of Origin - Electrical & Instrument
Cable - WEA
V-VME-STP-QA-0-000312
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
Pikka Development Project
Certificate of Origin - Electrical & Instrument Cable - WEA
Document number – V-VME-STP-QA-0-000312
Rev 1
01/12/2024 – Re-Issued for Construction
PIKKA DEVELOPMENT PROJECT
CERTIFICATE OF ORIGIN - ELECTRICAL & INSTRUMENT CABLE – WEA
V-VME-STP-QA-0-000312 – REV 1
CONTRACTOR DOC NO.: 200177-VME-QA-CE-035001
SUB-CONTRACTOR DOC NO.:
DOCUMENT CONTROL
The controlled copy of this document can be accessed from the Electronic Santos Alaska Project Document
Management System – Aconex. Printed copies are not controlled.
REVISION HISTORY
REV
Date
Originator
A
13/10/23
Issued for Review
J. EBORA
J. WONG
V.TOH
0
7/12/23
Issued for Construction
J. EBORA
V. TOH
V.TOH
1
12/01/24
Re-Issued for Construction
J. EBORA
V. TOH
V.TOH
Click here
to enter a
Click here
to enter a
CHANGE LOG
REV
CHANGE
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
Checked
Approved
OKON ITE CA BLES
802 Century Plaza Drive
Houston TX 77073
281-821-5500
Fax: 281-821-7855
www.okonite.com
CERTIFICATE OF ORIGIN
Date: August 21, 2023
To Whom It May Concern;
This document is to certify that all cables offered by The Okonite Company are
manufactured in The United States of America.
SCHEDULE B Harmonized #
8544.49.3040 for cables with voltages Not Exceeding 1000V, and
8544.60.40 for cables Exceeding 1000 Volts
8205.59.9000 CLX Terminating Tool Kit
ECCN# EAR99
THE OKONITE COMPANY
Penny Smith
Penny Smith
Distributor Quotations Supervisor
PE/s
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-EE-0-000027 – REV A
ISO 9001 Certificate - Electrical & Instrument
Cable - WEA
V-VME-STP-QA-0-000313
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
Pikka Development Project
ISO 9001 Certificate - Electrical & Instrument Cable - WEA
Document number – V-VME-STP-QA-0-000313
Rev 1
01/12/2024 – Re-Issued for Construction
PIKKA DEVELOPMENT PROJECT
ISO 9001 CERTIFICATE - ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-QA-0-000313 – REV 0
CONTRACTOR DOC NO.: 200177-VME-QA-CE-035002
SUB-CONTRACTOR DOC NO.:
DOCUMENT CONTROL
The controlled copy of this document can be accessed from the Electronic Santos Alaska Project Document
Management System – Aconex. Printed copies are not controlled.
REVISION HISTORY
REV
Date
Originator
Checked
Approved
A
13/10/23
Issued for Review
J. EBORA
J.WONG
V.TOH
0
7/12/23
Issued for Construction
J. EBORA
V. TOH
V.TOH
1
12/01/24
Re-Issued for Construction
J. EBORA
V. TOH
V.TOH
Click here
to enter a
Click here
to enter a
CHANGE LOG
REV
CHANGE
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
This Certificate of Registration acknowledges
The Okonite Company
Central Function
102 Hilltop Road
Ramsey, New Jersey 07446
United States
is registered in recognition of a quality management system demonstrated in conformance with
ISO 9001:2015
Scope of Registration:
Overall Scope: The Design of a Broad Range of Electrical Wire and Cable
Products, Including Product Development, Testing Laboratories and the HQ
Activities in Support of Cable and Compound Manufacturing Plants.
Number: 17498
Issued: 29-Dec-2022
Expires: 28-Dec-2025
161 Thorn Hill Road ▪ Warrendale, Pennsylvania 15086-7527, USA
Page 1 of 3
The Okonite Company (Central Function)
102 Hilltop Road
Ramsey, New Jersey 07446 United States
Scope: The Design of a Broad Range of Electrical Wire and
The Okonite Company - Cumberland Cable Plant
5 Industrial Road
Cumberland, Rhode Island 02865 United States
Scope: Cumberland Cable Plant: The Manufacture and Testing
The Okonite Company - Houston Service Center
802 Century Plaza
Houston, Texas 77073 United States
Scope: Houston Service Center: The Storage, Processing and
The Okonite Company - Kansas City Service Center
2631 S. 96th Street
Edwardsville, Kansas 66111 United States
Scope: Kansas City Service Center: The Storage, Processing
The Okonite Company - New Orleans Service Center
100 Alpha Drive, Suite 200
Destrehan, Louisiana 70047 United States
Scope: New Orleans Service Center: The Storage, Processing
The Okonite Company - Orangeburg Cable Plant
2276 Rowesville Road
Orangeburg, South Carolina 29115 United States
Scope: Orangeburg Cable Plant: The Manufacture and Testing
Cable Products, Including Product Development,
Testing Laboratories and the HQ Activities in Support of
Cable and Compound Manufacturing Plants.
of a Broad Range of Electrical Wire and Cable
Products.
Packaging of a Broad Range of Electrical Wire and
Cable Products.
and Packaging of a Broad Range of Electrical Wire and
Cable Products.
and Packaging of a Broad Range of Electrical Wire and
Cable Products.
of a Broad Range of Electrical Wire and Cable
Products.
Number: 17498
Issued: 29-Dec-2022
Expires: 28-Dec-2025
161 Thorn Hill Road ▪ Warrendale, Pennsylvania 15086-7527, USA
Page 2 of 3
The Okonite Company - Orangeburg Compound Plant
2276 Rowesville Road - Compound Plant
Orangeburg, South Carolina 29115 United States
Scope: Orangeburg Compound Plant: The Manufacture and
The Okonite Company - Pittsburgh Service Center
120 Solar Drive
Imperial, Pennsylvania 15126 United States
Scope: Pittsburgh Service Center: The Storage, Processing
The Okonite Company - Portland Service Center
14944 S.W. Century Drive
Sherwood, Oregon 97140 United States
Scope: Portland Service Center: The Storage, Processing and
The Okonite Company - Richmond Cable Plant
1740 Berea Road
Richmond, Kentucky 40475 United States
Scope: Richmond Cable Plant: The Manufacture and Testing of
The Okonite Company - Santa Maria Cable Plant
2900 South Skyway Drive
Santa Maria, California 93455 United States
Scope: Santa Maria Cable Plant: The Manufacture and Testing
The Okonite Company – Paterson Cable Plant
959 Market Street
Paterson, New Jersey 07513 United States
Scope: Paterson Cable Plant: The Manufacture and Testing of
Testing of a Broad Range of Electrical Wire and Cable
Products.
and Packaging of a Broad Range of Electrical Wire and
Cable Products.
Packaging of a Broad Range of Electrical Wire and
Cable Products.
a Broad Range of Electrical Wire and Cable Products.
of a Broad Range of Electrical Wire and Cable
Products.
a Broad Range of Electrical Wire and Cable Products.
Number: 17498
Issued: 29-Dec-2022
Expires: 28-Dec-2025
161 Thorn Hill Road ▪ Warrendale, Pennsylvania 15086-7527, USA
Page 3 of 3
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-EE-0-000027 – REV A
Type Test Report - Electrical & Instrument
Cable - WEA
V-VME-STP-QA-0-000315
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
Pikka Development Project
Type Test Report - Electrical & Instrument Cable - WEA
Document number – V-VME-STP-QA-0-000315
Rev 1
01/12/2024– Re-Issued for Construction
PIKKA DEVELOPMENT PROJECT
TYPE TEST REPORT - ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-QA-0-000315 – REV 1
CONTRACTOR DOC NO.: 200177-VME-QA-RP-035001
SUB-CONTRACTOR DOC NO.:
DOCUMENT CONTROL
The controlled copy of this document can be accessed from the Electronic Santos Alaska Project Document
Management System – Aconex. Printed copies are not controlled.
REVISION HISTORY
REV
Date
Originator
Checked
Approved
A
16/10/23
Issued for Review
J. EBORA
J. WONG
V.TOH
0
7/12/23
Issued for Construction
J. EBORA
V.. TOH
V.TOH
1
12/01/24
Re-Issued for Construction
J. EBORA
V.. TOH
V.TOH
Click here
to enter a
Click here
to enter a
CHANGE LOG
REV
CHANGE
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
THE OKONITE COMPANY
RAMSEY, NJ 07446
VERTICAL TRAY FIRE PROPAGATION TEST
DATA SHEET
Test Procedure:
UL standard 1685 using the IEEE 1202 / FT4 flame
source exposure
Sample
Construction: 3/C 4/0 AWG Class B Cu, 0.055" X-Olene XLP, cabled,
fillers, tape, 0.080” LT/FR Okoseal PVC jacket, 600V. OD = 1.420”
(pc# 112-31-3784)
Test Results:
Test Number:
08-081
08-082
Jacket Damage, in.
43
30
Max. Allowable Damage, in.
59
59
12:00
4:05
Propagation
No
No
Pass/Fail
Pass
Pass
Afterburn, min:sec
Conclusion:
Cable meets the requirements of the UL standard 1685
using the IEEE 1202 / FT4 flame exposure. This test
is a more severe vertical tray flame test procedure
than the UL 1685 using the UL flame exposure procedure
and the IEEE 383-1974 vertical tray flame test
procedure. Cables that pass the UL 1685 using the IEEE
1202 / FT4 flame exposure are also qualified to these
less severe test procedures.
Test conducted at Okonite in the Orangeburg, S.C.
Fire Test Laboratory
V1202-118
THE OKONITE COMPANY
Ramsey, New Jersey 07446
January 8th 2018
VERTICAL TRAY FLAME TEST
CERTIFICATION
FOR
3/C Cu Okoguard CLX VFD Type MV-105 MC-HL 5/8kV
Datasheet 2:22
Okonite certifies that the cable manufactured for the aforementioned product
line is qualified to the requirements of IEEE Standard 1202, Vertical Tray
Flame Test. Certification is based on qualification test results summarized
on the attached data sheet.
_____________________________
Graham Jones
Application Engineer
Page 1 of 1
THE OKONITE COMPANY
RAMSEY, NJ 07446
IEEE 1202 VERTICAL TRAY FLAME TEST DATA SHEET
FLAME TEST RESULTS
Test Procedure:
Sample
Construction:
IEEE 1202 standard for “Flame Testing of Cables for
Use In Cable Tray in Industrial & Commercial
Occupancies.”
15kV 3/C #2 AWG Bare Copper, extruded semicon,
0.220" Okoguard (EP), extruded semicon, 0.005" Cu
shield tape, cabled, binder tape, Aluminum C-L-X,
0.060" Okoseal (PVC) jacket
OD = 2.36"
PC #571-23-3504
Test Results:
Test #
1
2
Afterburn, min:sec
0:00
0:00
Jacket Damage, inches
28
31
Core Damage, inches
17
18
Max Allowable Damage, inches
59
59
Propagation
No
No
Pass/Fail
Pass
Pass
Conclusion:
JRC/ams
V1202-04
Cable meets the requirements of IEEE 1202. IEEE 1202
is a more severe vertical tray flame test than the
IEEE 383-1974 vertical tray flame test. Cables that
pass the IEEE 1202 procedure are qualified to the
IEEE 383 procedure.
THE OKONITE COMPANY
Ramsey, New Jersey 07446
January 8th 2018
VERTICAL TRAY FLAME TEST
CERTIFICATION
FOR
3/C VFD & 4/C Cu XHHW-2 CLX MC-HL 600V
Datasheet 4:1
Okonite certifies that the cable manufactured for the aforementioned product
line is qualified to the requirements of IEEE Standard 1202, Vertical Tray
Flame Test. Certification is based on qualification test results summarized
on the attached data sheet.
_____________________________
Graham Jones
Application Engineer
Page 1 of 1
THE OKONITE COMPANY
RAMSEY, NJ 07446
IEEE 1202 VERTICAL TRAY FIRE PROPAGATION TEST
DATA SHEET
Test Procedure:
Sample
Construction:
IEEE 1202 standard for “Flame Testing of Cables
for Use In Cable Tray in Industrial & Commercial
Occupancies.”
546-31-3403 600V 3/C #14 (7x) AWG, 0.030" X-Olene
insulation,
cabled
with
3-#18
AWG
copper
grounding wires, binder tape, Aluminum CLX
sheath, 0.050" Okoseal (PVC) jacket
OD = 0.64"
Test Results:
Test #
1
2
Jacket Damage, inches
27
32
Max Allowable Damage, inches
59
59
Propagation
No
No
Pass/Fail
Pass
Pass
Test Conducted by UL, Northbrook, IL (Ref 00ME09710)
Conclusion:
v1202-52
Cable meets the requirements of IEEE 1202.
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-EE-0-000027 – REV A
Catalogue of Product - Electrical & Instrument
Cable - WEA
V-VME-STP-EE-0-000025
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
Pikka Development Project
Catalogue of Product - Electrical & Instrument Cable - WEA
Document number – V-VME-STP-EE-0-000025
Rev A
10/13/2023 – Issued for Review
PIKKA DEVELOPMENT PROJECT
CATALOGUE OF PRODUCT - ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-EE-0-000025 – REV 0
CONTRACTOR DOC NO.: 200177-VME-EL-CT-035000
SUB-CONTRACTOR DOC NO.:
DOCUMENT CONTROL
The controlled copy of this document can be accessed from the Electronic Santos Alaska Project Document
Management System – Aconex. Printed copies are not controlled.
REVISION HISTORY
REV
Date
A
13/10/23
Issued for Review
Originator
Checked
Approved
J. EBORA
J.WONG
V.TOH
Click here
to enter a
Click here
to enter a
Click here
to enter a
CHANGE LOG
REV
CHANGE
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
COMPACT STRAND
CONSTRUCTION
Product Data
Section 2: Sheet 22
C-L-X® VFD Type MV-105 or MC-HL
UL
R
®
5/8kV Okoguard Shielded Power Cable-Aluminum Sheath
5000V CSA RA90
3 Okopact (Compact Stranded) Copper Conductors/105°C Rating
5kV - 133% or 8kV - 100% Insulation Level
For Cable Tray Use-Sunlight Resistant-For Direct Burial
Insulation
lated conductors are tested in accordance
with AEIC CS8.
Insulation Screen: Extruded semiconducting
EPR insulation screen per ICEA S-93639/NEMA WC74, AEIC CS8 and UL 1072.
Shield: 5 mil uncoated copper tape helically
applied with 12.5% nominal overlap.
Phase Identification: Color coded (black, red,
blue) polyester ribbon laid longitudinally
under the copper shield tape.
Grounding Conductors: Three uncoated
Assembly
copper in accordance with UL 1072.
Type MV-105 conductors are assembled with
Assembly: Cabled with fillers and ground
fillers, three bare stranded grounding conductors
wires in the interstices, binder tape overall.
and a binder tape into a round core. A
Sheath: Close fitting, impervious, continuous,
continuously corrugated welded aluminum sheath
corrugated aluminum C-L-Xper UL 1072; C(C-L-X) encases the cable core. The C-L-X
L-Xis recognized as a grounding conductor
sheath is protected with a low temperature
by NEC.
®
yellow Okoseal jacket. The impervious,
Jacket: A low temperature, sunlight resistant,
continuous, corrugated aluminum C-L-X sheath
yellow PVC jacket in accordance with UL
provides complete protection against moisture,
1072. Other color jackets are available.
liquids and gases in addition to its excellent
UL Listed as type MV-105 or MC-HL, sunlight
mechanical strength. In addition, the aluminum
resistant for use in cable tray, and for direct
CLX sheath exceeds the equipment grounding
burial in accordance with UL 1072 & 2225.
requirements of NEC Section 250.118 and
CSA Listed to C68.10.
250.122, and can be used as the equipment
Product Features
grounding conductor in non-HL areas. The
• Triple tandem extruded, all EPR system.
Okoseal jacket allows the cable to be direct
• Complete prepackaged, color coded,
buried in the ground, embedded in concrete or
factory tested wiring system.
areas subjected to corrosive atmospheres.
• Okoguard C-L-X cables meet or exceed all
Applications
recognized industry standards (UL, AEIC,
C-L-Xpower cables are recommended as an
economical alternate to a wire in conduit system. NEMA/ICEA, IEEE).
They are designed specifically for use as feeders • Passes the vertical tray flame test
requirements of IEEE 383 and 1202, UL
or branch circuits in industrial and utility power
distribution systems. C-L-Xpower cables may be 1072, ICEA T-29-520 (210,000 BTU/hr.).
• Complies with NEC Section 336.36 and is
installed in both exposed and concealed work,
wet and dry locations, directly buried in the earth, suitable for direct buried when installed in
or embedded in concrete. They may be installed accordance with NEC Sections 250.4(A)(5).
on metal racks, troughs, in cable trays or secured • Complies with NEC Articles 501, 502, 503
and 505 for hazardous locations.
to supports not greater than 6 feet apart.
•
Continuous sheath provides grounding
C-L-X Type MC-HL cables are also approved for
Classes I, II, and III, Division 1 and 2 and Class I, safety.
• Excellent corona resistance.
Zones 1 and 2 hazardous locations - NEC
• Screens are clean stripping.
Articles 501, 502, 503 and 505.
• Exceptional resistance to "treeing".
Specifications
• Minimum installation temperature of -40°C.
Conductors: Uncoated copper compact
• Improved Temperature Rating.
stranded per ASTM B-496.
• Three symmetrical grounding conductors
Strand Screen: Extruded semiconducting EPR
with the CLX sheath provide a superior low
strand screen meets or exceeds electrical and
resistance return path for VFD and other
physical requirements of ICEA S-93-639/NEMA
modern ac drive/motor applications.
WC74 and UL 1072.
• ABS listed as CWCMC Type MC-HL.
Insulation: Okoguard meets or exceeds the
• CSA listed as FT4, SR, HL and LTGG
electrical and physical requirements of ICEA S(-40°C).
93-639/NEMA WC74 and UL 1072. The insulOkoguard Is Okonite's registered trade name for
its exclusive ethylene-propylene rubber (EPR)
base, thermosetting compound, whose optimum
balance of electrical and physical properties is
unequaled in other solid dielectrics. Okoguard
insulation, with the distinctive red color and a
totally integrated EPR system, provides the
optimum balance of electrical and physical
properties for long, problem free service.
A Uncoated (Compact Stranded)
Copper Conductors
B Extruded Semiconducting EPR
Strand Screen
C Okoguard Insulation (EPR)
D Extruded Semiconducting EPR
Insulation Screen
E Phase Identification Tape
F Three Copper Grounding
Conductors
G Uncoated Copper Shield
H Fillers and Binder Tape
J Impervious, continuous,
Corrugated Aluminum C-L-X Sheath
K Jacket-Yellow Okoseal
Product Data
C-L-X VFD Type MV-105 or MC-HL
Section 2: Sheet 22
5/8kV Okoguard Shielded Power Cable-Aluminum Sheath
3 Okopact (Compact Stranded) Copper Conductors/105°C Rating
100% & 133% Insulation Level
For Cable Tray Use-Sunlight Resistant-For Direct Burial
UL
R
Okoguard Insulation: 115 mils (2.92mm), 5kV-133% or 8kV-100% Insulation Level
s
he
m
m
nc
rs il)
ils
I
o
ht
-m
es
m
m
t
m
m
c
.
.
c
ht
ig
m
r
k
es
ch
s
D
u
s
e
g
D
/
-m
.
e
i
.
h
n
s
m
s
I
)
e
e
W
O
e
O
e
et .)
nd WG
)
nc
(3
.iz
W
e
p
.e
in 2
m in
kn
kn
Co (A
-I
.D
hi ’
or
s y ( es rial
.D
ia n (
et ’
or
rS
ic
ic
g
e
S
O
e
C
D
N
D
C
O
i
o
h
h
a
i
.
0
t
t
. 0
u
.
.
. 0
.
.
. tio
in iz
T
O
ci Tr acit t B
tT
uc
ox
ox 0
ox
ox 00
ox
ox
ox la
nd x S
et
X
pa ble
ke
p rec
pr
pr s./1
pr s./1
pr
pr
pr
pr su
nd
ck
ou o.
Lc
m
p
p
p
p
p
p
a
p
r
o
m
i
a
n
A C
A
A lb
A
A lb
A
A
J
C
A I
A D
C
G N
Ja
²
)
Nu
ta
Ca
C
m
g
lo
(1
on
(A duc
W to
G r
or siz
kc e
m
il)
r
be
r
e
ov
With Yellow Okoseal Jacket
* 571-22-3694
571-22-3696
▲571-22-3698
8
6
4
8.4
13.3
21.2
0.40
0.44
0.48
3x12
3x10
3x10
1.04 26.4
1.12 28.4
1.21 30.7
1.29
1.37
1.51
50
50
60
1.27
1.27
1.52
1.40
1.48
1.65
35.6
37.6
41.9
907
1090
1398
1056
1259
1556
66
88
115
90
115
150
▲571-22-3706
571-22-3708
571-22-3710
2
1
1/0
33.6
42.4
53.5
0.54
0.58
0.61
3x10
3x8
3x8
1.34 34.0
1.40 35.6
1.48 37.6
1.64
1.69
1.78
60
60
60
1.52
1.52
1.52
1.78
1.82
1.91
45.2
46.2
48.5
1732
1992
2273
1890
2137
3012
154
180
205
190
215
245
▲571-22-3717
▲571-22-3725
571-22-3727
2/0 67.4
4/0 107.0
250 127.0
0.65
0.75
0.80
3x8
3x7
3x6
1.57 39.9
1.78 45.2
1.90 48.3
1.92
2.15
2.28
60
60
60
1.52
1.52
1.52
2.00
2.29
2.44
50.8
58.2
62.0
2616
3613
4175
4171
3980
4390
240
320
355
280
360
395
▲571-22-3838
▲571-22-3846
571-22-3748
571-22-3751
350 177.0
500 253.0
750 380.0
1000 507.0
0.89
1.01
1.19
1.34
3x6
3x5
3x4
3x3
2.10
2.35
2.73
3.11
2.45
2.75
3.24
3.67
75
75
85
85
1.91
1.91
2.16
2.16
2.61
2.91
3.42
3.85
66.3
73.9
86.9
97.8
5328 5435
7095 7603
10134 11021
13164 14794
440
545
685
790
475
570
700
785
53.3
57.6
69.3
79.1
* This cable is only rated 5kV (133%), due to UL limitations, it cannot be rated 8kV.
Okonite’s web site, www.okonite.com contains the most up to date information.
For 8kV ampacities refer to the NEC tables referenced below in the columns listed 5001-35,000 Volts
▲ Authorized stock item. Available from our Customer Service Centers.
Copper or bronze C-L-X and non-jacketed C-L-X are available on special order.
Jackets
Optional jacket types available - consult local sales office.
Aluminum Conductors
(1) Aluminum conductors are available on special order.
Ampacities
(2) Ampacities are in accordance with Table 315.60(C)(5) of the NEC for an insulated
three conductor cable, isolated in air, with a conductor operating temperature of
105°C and an ambient air temperature of 40°C.
(3) Ampacities are in accordance with Table 315.60(C)(17) of the NEC for an
insulated three conductor cable directly buried in the earth with a conductor
operating temperature of 105°C, ambient earth temperature of 20°C, 100%
load factor and thermal resistance (RHO) of 90.
Refer to the NEC, IEEE/ICEA S-135 Power Cable Ampacity Tables, or the
Okonite Engineering Data Bulletin for installation in duct banks, other ambient
temperatures, circuit configurations or installation requirements.
C-L-X® The Okonite Company
THE OKONITE COMPANY
R/22120222
Ramsey, New Jersey 07446
Product Data
Section 4: Sheet 1
®
C-L-X Type MC-HL (XHHW-2)
UL
®
UL 600/1000V and CSA 600V Power MC-HL Cable - Aluminum Sheath
3/C VFD & 4/C Copper Conductors/90°C Wet or Dry Rating
600/1000V Marine Shipboard Cable
For Cable Tray Use - Sunlight Resistant - For Direct Burial
Insulation
X-Olene® is Okonite's trade name for its
chemically cross-linked polyethylene, with
high dielectric strength.
A
Assembly and Coverings
B
C
D
E
OKONITE 6 P-OS 1 PR 16 AWG CU X-OLENE (XLPE)
3/C 1/0AWG COMPACT CU 600/1000V 3X10AWG CU GRD CLX VFD(UL) MC-HL XHHW-2
G
OKONITE SP-OS 12 PR 16 AWG CU X-OLENE (XLPE)
F
A Bare, Stranded Copper Conductors
B X-Olene Insulation-Color Coded for
Identification
C Bare, Stranded Copper Grounding
Conductor(s)
D Non-Hygroscopic Fillers, as necessary
E Binder Tape
F Impervious, Continuous, Welded
Corrugated, Aluminum C-L-X Sheath
G Black Okoseal Jacket
The individual conductors are cabled together
with non-hygroscopic fillers and a binder tape
overall. The C-L-X sheath exceeds the
grounding conductor requirements of Table
250.122 of the NEC and UL 1569. A bare
stranded copper grounding conductor(s),
located in the outer interstices, is provided for
grounding. The impervious, continuous,
welded, corrugated aluminum C-L-X sheath
provides complete protection against
moisture, liquids and gases and has excellent
mechanical strength. For direct burial in the
ground, embedment in concrete, or for areas
subjected to corrosive atmospheres, the C-L-X
sheath is protected with a low temperature
black Okoseal® (PVC) jacket.
Applications
C-L-X Type MC-HL cables with the impervious,
continuous, corrugated aluminum sheath are
recommended as an economical alternate to a
wire in conduit system. In addition, the
aluminum CLX sheath exceeds the equipment
grounding requirements of NEC Section
250.118 and 250.122, and can be used as the
equipment grounding conductor in non-HL
areas.
They are authorized for use on services,
feeders and branch circuits for power, lighting,
control and signaling circuits in accordance
with Article 330 and 725 of the NEC.
C-L-X Type MC-HL cables may be installed
indoors or outdoors, in wet or dry locations, as
open runs of cable secured to supports spaced
not more than six feet apart, in cable tray, as
aerial cable on a messenger, in any approved
raceway, direct burial, or encased in concrete.
C-L-X type MC-HL cables are also approved
for Classes I, II and III, Division 1 and 2 and
Class I, Zones 1 and 2 hazardous locations per
NEC Articles 501, 502, 503 and 505; in Zone 1,
Zone 2, Class II Div 2, Class III Div 1 and Class
III Div 2 per CEC.
Specifications
Conductors: Uncoated soft copper per ASTM
B-3. Sizes smaller than #8 are compress
stranded per ASTM B-8. Sizes #8 and larger
are compact stranded per ASTM B-496.
Insulation: X-Olene per ICEA S-95-658/
NEMA WC70 and UL 44, Listed UL Type
XHHW-2. Meets MIL-DTL-1377H, section
4.8.4.1.2 cold bend at -66°C and ASTM D746
brittle point at -76°C.
Conductor Identification: Control Sizes, #9
AWG and smaller, color coded insulation. Power
Sizes, #8 AWG and larger, black with printed
words of number and color.
Grounding Conductor(s): One or three bare
soft copper per ASTM B-3. Stranded in
accordance with UL 1581. Meets or exceeds
requirements of NEC Table 250.122.
Sheath: Close fitting, impervious, continuous,
welded, corrugated aluminum C-L-X per UL
1569. Exceeds grounding conductor
requirements of NEC Table 250.122.
Jacket: Black Okoseal (PVC) per UL1569.
Meets ASTM D746 brittle point at -40°C.
Product Features
• UL Listed as Type MC-HL cable per UL 2225
(E38916).
• UL Listed for cable tray use, direct burial and
sunlight resistant.
• UL 1309 (CWCMC) listed & UL classified in
accord with IEEE 1580 as Marine Shipboard
Cable rated 600/1000 volts.
• Passes the IEEE 383-1974 and IEEE 1202
Vertical Tray Flame Test.
• Passes the 210,000 BTU ICEAT-29-520
Vertical Tray Flame Test.
• Complete pre-packaged, factory-tested wiring
system; color coded.
• C-L-X cables are quality control inspected to
meet or exceed applicable UL standards.
• 90°C continuous operating temperature in all
types of installations.
• 130°C emergency rating.
• 250°C short circuit rating.
• Good EMI shielding characteristics.
• Impervious, continuous metallic sheath excludes moisture, gases and liquids.
• Lower installed system cost than conduit or
EMT systems.
• Provides excellent grounding safety.
• Excellent compression and impact resistance.
• Continuous long lengths.
• Installation temperature of -40°C or °F.
• Complies with NEC Articles 501, 502 and 503
for hazardous locations.
• American Bureau of Shipping Type approved
as CWCMC Type MC-HL.
• Three symmetrical grounding conductors with
the CLX sheath provide a superior low
resistance return path for VFD and other modern
ac drive/motor applications.
• CSA C22.2 No. 123 Type RA90.
• CSA C22.2 No. 174 Type HL.
• CSA listed as FT4 and LTGG (-40°C).
• CSAType RA90 HL complies with CEC Zone 1,
Zone 2, Class II Div 2, Class III Div 1 and Class III
Div 2 Hazardous Locations.
®
C-L-X Type MC-HL (XHHW-2)
Product Data
UL 600/1000V and CSA 600V Power MC-HL Cable - Aluminum Sheath
3/C VFD & 4/C Copper Conductors/90°C Wet or Dry Rating
UL
600/1000V Marine Shipboard Cable
For Cable Tray Use - Sunlight Resistant - For Direct Burial
Section 4: Sheet 1
®
G
W
)A
(s
m
ils
r
t
G
s
t
t
es
to
-m s-m
gh
es
s
m
gh
uc
es
ch
uc
s
AW
e
n
ei
d
l
h
s
s
d
m
ei
In
y *
k
h
*
e
a
c
m
e
n
e
n
W
m
c
c
z
n † tW
i
.
Dr ity
In
.
m
ity
p
m
kn ickn
In
Co
Si
io .)
Co
.D
Th
.D
hi '
..ic
or pac t
ac
ct . In . Ne 0'
.g
.O
of
h
O
or
S
h
t
n
D
D
p
e
n
t
.
.
D
.
D
0
q
.
T
r
i
e
T
e
0
x
S (s
x. 00
O
O
tio
O.
uc
W Am W Am
O.
ox
ox
et
be
et
snd
ro 10
X
la
X
ro
pr
m
re
pr
nd
re
ck
ck
os rea pp bs./ pp s./1 0ºC EC 5ºC EC
Lou
Lsu
A l
Ap
Ja
Nu
9 N 7 N
Ja
Co
Ap
Co
A lb
CCr A
Co
CIn
Gr
s
or
r
be
g
lo
ta
Ca
m
Nu
ils
-m
▲546-31-3403
14(7X)
▲546-31-3404 (2.08mm²)
3
4
30
3#18
3#18
0.33 8.4
0.37 9.3
0.53 13.5 50 1.27
0.58 14.7 50 1.27
0.64 16.3 0.32
0.69 17.5 0.37
160
222
190
261
15
15
15
15
▲546-31-3453
▲546-31-3454
12(7X)
(3.31mm²)
3
4
30
3#16
3#16
0.37 9.3
0.45 11.4
0.58 14.7 50 1.27
0.67 16.9 50 1.27
0.69 17.5 0.37
0.78 19.7 0.47
239
286
278
320
20
20
20
20
▲546-31-3503
▲546-31-3504
10(7X)
(5.26mm²)
3
4
30
3#14
3#14
0.41 10.4 0.62 15.8 50 1.27
0.45 11.4 0.67 16.9 50 1.27
0.73 18.6 0.42
0.78 19.7 0.47
300
348
380
428
30
30
30
28
▲571-31-3190
▲571-31-3263
8(7X)
(8.36mm²)
3
4
45
3#14
10
0.50 12.7 0.71 18.0 50 1.27
0.58 14.7 0.80 20.3 50 1.27
0.81 20.6 0.52
0.90 22.9 0.64
385
465
420
495
55
44
50
40
▲571-31-3191
▲571-31-3270
6(7X)
(13.3mm²)
3
4
45
3#12
8
0.58 14.7 0.80 20.3 50 1.27
0.66 16.8 0.89 22.5 50 1.27
0.90 22.9 0.64
0.99 25.1 0.77
525
630
595
685
75
60
65
52
▲571-31-3200
▲571-31-3272
4(7X)
(21.2mm²)
3
4
45
3#12 0.68 17.3 0.89 22.5 50 1.27
8
0.77 19.6 0.97 24.7 50 1.27
0.99 25.1 0.77
1.08 27.5 0.92
704
845
820
930
95
76
85
68
▲571-31-3204
▲571-31-3276
2(7X)
(33.6mm²)
3
4
45
3#10
6
0.80 20.3 1.02 25.9 50 1.27
0.92 23.4 1.15 29.2 50 1.27
1.13 28.7 1.00
1.26 32.0 1.25
995 1050
1245 1370
130 115
104 92
571-31-3208
571-31-3280
1(19X)
(42.4mm²)
3
4
55
3#10
6
0.92 23.4 1.15 29.2 50 1.27
1.04 26.4 1.29 32.8 50 1.27
1.26 32.0 1.25
1.40 35.6 1.54
1100 1181
1500 1620
145 130
116 104
▲571-31-3213
571-31-3285
1/0(19X)
(53.5mm²)
3
4
55
3#10 1.00 25.5 1.24 31.4 50 1.27
6
1.12 28.4 1.37 34.9 50 1.27
1.34 34.0 1.41
1.48 37.6 1.72
1470
1830
1560
1975
170 150
136 120
▲571-31-3216
▲571-31-3289
2/0(19X)
(67.4mm²)
3
4
55
3#10
6
1.09 27.7 1.34 34.0 50 1.27
1.23 31.2 1.51 38.5 60 1.52
1.44 36.6 1.63
1.64 41.7 2.11
1770
2310
2020
2545
195 175
156 140
▲571-31-3218
571-31-3291
3/0(19X)
(85.1mm²)
3
4
55
3#8
6
1.19 30.2 1.47 37.3 50 1.27
1.35 34.3 1.64 41.7 60 1.52
1.58 40.1 1.96
1.78 45.2 2.49
2180 2404
2752 2939
225 200
180 160
▲571-31-3224
▲571-31-3296
4/0(19X)
(107mm²)
3
4
55
3#8
4
1.33 33.8 1.60 40.6 60 1.52
1.49 37.8 1.78 45.2 60 1.52
1.73 44.0
1.91 48.6
___
___
2675
3430
2880
3710
260 230
208 184
▲571-31-3228
571-31-3300
250(37X)
(127mm²)
3
4
65
3#8
4
1.48 37.6 1.74 44.2 60 1.52
1.64 41.6 1.96 49.7 60 1.52
1.87 47.5
2.09 53.0
___
___
3140
4070
3420
4330
290 255
232 204
▲571-31-3236
▲571-31-3308
350(37X)
(177mm²)
3
4
65
3#7
3
1.66 42.2 1.96 49.7 60 1.52
1.89 48.0 2.19 55.6 75 1.90
2.09 53.0
2.35 59.8
___
___
4210
5440
4300
6000
350 310
280 248
▲571-31-3244
▲571-31-3316
500(37X)
(253mm²)
3
4
65
3#6
2
1.94 59.3 2.28 57.9 75 1.90
2.14 54.4 2.49 63.2 75 1.90
2.44 62.0
2.65 67.4
___
___
5930
7570
6420
8120
430 380
344 304
▲571-31-3248
571-31-3320
750(61X)
(380mm²)
3
4
80
3#5
1
2.37 60.2 2.75 69.8 75 1.90
2.61 66.2 3.03 76.9 85 2.16
2.92 74.1
3.21 81.6
___
___
8700 9400
11250 12190
535 475
428 380
571-31-3252
571-31-3324
1000(61X)
(507mm²)
3
4
80
1/0
1/0
2.67 67.7 3.11 79.0 85 2.16
3.07 78.0 3.63 92.1 85 2.16
3.30 83.8
3.81 96.8
___
___
11410 12430
15110 17510
615 545
492 436
Okonite’s web site, www.okonite.com contains the most up to date information.
®
C-L-X Type MC-HL (XHHW-2)
Product Data
UL 600/1000V and CSA 600V Power MC-HL Cable - Aluminum Sheath
3/C VFD & 4/C Copper Conductors/90°C Wet or Dry Rating
UL
600/1000V Marine Shipboard Cable
For Cable Tray Use - Sunlight Resistant - For Direct Burial
Section 4: Sheet 1
®
600/1000V Composite Power and Control Cable - Aluminum Sheath
Okoseal Jacket: 50 mils (1.27mm)
ils
G
ils
W
- m or A
t
s
s
t
s
r
ht
gh
e
)*
rs
es
es
uc
to
n
ig
ei
n
o
l
r
h
h
d
c
k
e
t
y (1
k
*
m
c
c
m
W
ic
na .)† t W
be
ic
ty
on
m
Dr city
du ize
uc ize
In
m
In
p
h
o
h
i
i
m
n
d
r
C
ci
T
n
S
e
t
S
T
h '
.
I
u
o
n
.
.
.
o
a
a
c
g
'
N
S
.
n
X
D
o
g
t
p
X
p t
N
D
D
D
e
0 .
0
n
.
lC r
io
g
O.
O.
O.
O.
-S (sq ox 00 x 00 We m We m
di
tin
r C ber
ro e
at
lo
le
le
ss ea ppr s./1 pro s./1 ºC C A ºC C A
-X
un
-X
ul
nt umb sula
we um
ta
b
b
o
L
o
L
s
p
r
o
E
E
a
r
o
0
5
r
a
a
b
A l
A lb
C N
9 N 7 N
C
In
P N
C
C A
C
In
C
C
G
s
es
▲546-31-3984 3X10
▲571-31-3657 3X8
▲571-31-3667 3X6
▲571-31-3677 3X4
30
45
45
45
4X12
4X12
4X12
4X12
30
30
30
30
-m
10
10
8
8
0.75
0.89
0.93
0.97
19.0
22.6
23.6
24.7
0.86
0.99
1.03
1.08
21.9
25.1
26.2
27.5
0.58
0.77
0.83
0.92
425
530
655
810
460
585
720
895
30 30
55 50
75 65
95 85
Okonite’s web site, www.okonite.com contains the most up to date information.
▲ Authorized Stock Item. Available from our Customer Service Centers.
Copper or Bronze C-L-X is available on special order.
Jackets
Optional jacket types available - consult local sales office.
†Cross-sectional area for calculation of cable tray fill in accordance with
NEC Section 392.22.
(1) Ampacities
Ampacities are based on Table 310.16 of the National Electrical Code for
XHHW-2 conductors rated 90ºC, in a multi-conductor cable, at an ambient temperature of 30ºC (86ºF). The 75ºC column is provided for additional information .
The ampacities shown apply to open runs of cable, installation in any approved
raceway, direct burial in the earth, or as aerial cable on a messenger.
Derating for more than three current carrying conductors within the cables is in
accordance with NEC Section 310.15(C)(1).
The ampacities shown also apply to cable installed in cable tray in accordance
with NEC Section 392.80
*Current limited to 15, 20 and 30 amps per Section 240.4(D)(3) of the NEC for #14, #12 and #10 AWG, respectively.
®
C-L-X Type MC-HL (XHHW-2)
Product Data
UL 600/1000V and CSA 600V Power MC-HL Cable - Aluminum Sheath
3/C VFD & 4/C Copper Conductors/90°C Wet or Dry Rating
UL
600/1000V Marine Shipboard Cable
For Cable Tray Use - Sunlight Resistant - For Direct Burial
Section 4: Sheet 1
®
Conductor
Number
Base Color
1
2
3
4
Black
Red
Blue
Orange
Purpose
Base Color
Tracer Color
Equipment Grounding
Uninsulated
Green
Green
1 or more continuous yellow stripes
White
White
White
White
White
White
White
Black continuous stripe
Red continuous stripe
Blue continuous stripe
Orange continuous stripe
Brown continuous stripe
Numeric Printing
Grounded
Sizes 14, 12 & 10 AWG:
Color Coding per ICEA Method 1, E-2 color sequence.
Sizes 8 AWG and larger:
Surface Printing of Numbers and color
desciptions per ICEA Method 3, E-2 color sequence.
THE OKONITE COMPANY
R/23080401
Ramsey, New Jersey 07446
Product Data
Section 4: Sheet 8
UL
X-Olene®-Okoseal®
®
®
UL Type TC/TC-ER (XHH/XHHW-2) and cUL CIC-TC*
600/1000 Volt Power and Control Tray Cable
Multiple Copper Conductors, 90°C Wet or Dry
With or Without Grounding Conductor
For Cable Tray Use - Sunlight Resistant - For Direct Burial
*cUL CIC-TC-ER sizes 1-4/0 AWG
Insulation
X-Olene is Okonite's trade name for its crosslinked polyethylene, with high dielectric strength
insulation.
®
Jacket
The Okoseal (PVC) jacket supplied with this
cable is mechanically rugged and has excellent
resistance to acids and most chemicals and is
rated for low temperature installations.
OKONITE 6 P-OS 1 PR 16 AWG CU X-OLENE (XLPE)
7/C 14 AWG CU X-OLENE XLP 600/1000V (UL) TC-ER XHHW-2
Applications
A Uncoated Copper Conductors
B X-Olene Insulation
C Fillers, as required
D Black Okoseal Jacket
Okonite X-Olene Okoseal tray cable is
permitted for use on power, lighting, control,
and signal circuits; indoors or outdoors; in cable
trays, raceways, direct burial in the ground, or
where supported in outdoor locations by a
messenger wire; for Class 1 circuits as
permitted in Article 725 of the NEC; and in
cable trays in Class I, Division 2 hazardous
locations in industrial establishments where the
conditions of maintenance and supervision
assure that only qualified persons will service
the installation. Cables marked TC-ER may
also be used between a cable tray and the
utilization equipment or device, when installed
in accordance with NEC 336.10(7).
Specifications
Conductors: Uncoated soft copper per ASTM
B-3. Sizes smaller than #8 are compress
stranded per ASTM B-8. Sizes #8 and larger
are compact stranded per ASTM B-496.
Insulation: X-Olene insulation per UL 1581,
listed as XHHW-2.
Color Coding: Base colors and tracers as
shown on reverse of Data Sheet and, for sizes
#8 AWG and larger, black conductors with
surface printing of numbers and colors per
ICEA S-73-532 NEMA/WC57 Method 3.
Assembly: Conductors cabled in accordance
with UL 1277 using fillers and tape, as needed.
Grounding Conductor: Where indicated, bare
or insulated stranded copper in accordance
with NEC Table 250.122.
Overall Jacket: Complies with UL 1277. The
Okoseal compound meets or exceeds the
requirements of UL 1581.
Cable passes the Vertical Tray Flame Test
requirements of UL 1277 for Type TC Power
and Control Tray Cable.
UL Listed as Type TC or TC-ER cable with a
sunlight resistant jacket and for direct burial.
Product Features
Insulated conductors are UL Listed Type
XHH / XHHW-2.
90°C continuous rating in wet or dry
locations.
130°C emergency overload rating.
250°C short circuit rating.
X-Olene Okoseal Type TC or TC-ER cables
are quality control inspected to meet or
exceed applicable industry standards.
Resistant to moisture and most chemical
atmospheres.
Thermal stability at elevated temperatures.
Easy to install and terminate.
Mechanically rugged.
High dielectric strength.
Small diameter, lightweight.
Minimum installation temperature of -40°C.
Applicable Standards
• UL listed for cable tray use, direct burial, in
ducts, and sunlight resistant.
• Vertical Tray Flame Tests: IEEE 383-1974,
Sizes 4/0 AWG and larger meet FT4/IEEE
1202.
• CSA C22.2 No. 239 Type CIC for sizes 4/0
AWG and smaller.
• CSA C22.2 No. 230 Type TC-ER for sizes
1-4/0 AWG.
• CSA C22.2 No. 230 Type TC for sizes
smaller than 1 AWG.
• 1000V CSA Type CIC available for sizes
4/0 AWG and smaller.
X-Olene-Okoseal
Product Data
UL Type TC/TC-ER (XHH/XHHW-2) and cUL CIC-TC*
600/1000 Volt Power and Control Tray Cable
Multiple Copper Conductors, 90°C Wet or Dry
With or Without Grounding Conductor
For Cable Tray Use - Sunlight Resistant - For Direct Burial
*cUL CIC-TC-ER sizes 1-4/0 AWG
Section 4: Sheet 8
UL
®
®
ils
s
r
to
r
be
m
g
Nu
o
al
t
Ca
s
es
-m
ils
m
l
na
io
s
t
ht
gh
)*
m
s
en
s
ig
ei
S
n
d
(1
m
s
k
s
I
e
e
n
e
e
W
ry ity
s .)
z
ic
*
i
o
.
W
n
n
s
.
D
h
t
ip
C
D
o n
EC (1)
D
T
r ac
ck
ck
r S il
O.
n
Cr q. i
Ne 0'
of
Sh 0'
O.
hi
hi
t N ity
t o mp
to cm
.
o
.
.
.
.
E
r
T
T
e
i
e
c
x
s
0
0
x
x
t
x
x
P
(
u /k
0
o
0
o
W ac
o
W A
o
o
be
et
et
la
TY
pr
nd G
pr rea
pr ./1 pr ./1
m
pr
ck
ck
ºC mp
ºC EC
su
Ap
Co AW
In
Ap A
Ap lbs Ap lbs
Nu
Ap
Ja
Ja
UL
75 A
90 N
-m
-m
e
ch
45
45
45
1.14 0.37 9.4
1.14 0.41 10.4
1.14 0.43 10.9
0.11
0.13
0.15
70
105
120
85
120
135
15
15
15
15
15
15
45
45
60
1.14 0.47 11.9
1.14 0.50 12.7
1.52 0.62 15.7
0.17
0.20
0.30
132
182
254
148
205
278
15
15
15
15
14
14
uc
t
ec
▲202-31-3502
▲202-31-3503
▲202-31-3504
TC
TC-ER
TC-ER
2
3
4
▲202-31-3505
▲202-31-3507
▲202-31-3509
TC-ER
14(7X)
(2.08mm²) TC-ER
TC-ER
5
7
9
▲202-31-3512
202-31-3519
202-31-3537
TC-ER
TC-ER
TC-ER
12
19
37
60
60
80
1.52 0.69 17.6
1.52 0.80 20.3
2.03 1.11 28.2
0.38
0.50
0.97
306
446
856
338
485
936
12
12
10
10
10
8
▲202-31-3602
▲202-31-3603
▲202-31-3604
TC
TC-ER
TC-ER
2
3
4
45
45
45
1.14 0.40 10.2
1.14 0.44 11.2
1.14 0.47 11.9
0.13
0.15
0.17
92
139
171
107
152
187
20
20
20
20
20
20
TC-ER
▲202-31-3605
12(7X)
▲202-31-3607 (3.31mm²) TC-ER
TC-ER
▲202-31-3609
5
7
9
45
60
60
1.14 0.52 13.1
1.52 0.59 15.0
1.52 0.68 17.3
0.21
0.27
0.36
179
269
344
195
293
376
20
20
20
20
17
17
▲202-31-3612
202-31-3619
202-31-3637
TC-ER
TC-ER
TC-ER
12
19
37
60
80
80
1.52 0.77 19.6
2.03 0.95 24.1
2.03 1.24 31.5
0.47
0.71
1.21
425
640
1200
464
704
1290
15
15
12
12
12
10
▲202-31-3702
▲202-31-3703
▲202-31-3704
▲202-31-3705
TC
TC-ER
TC-ER
TC-ER
2
3
4
5
45
45
60
60
1.14
1.14
1.52
1.52
11.4
12.2
14.2
15.5
0.16
0.18
0.25
0.29
122
183
242
294
138
199
258
318
30
30
30
30
30
30
28
28
TC-ER
TC-ER
TC-ER
7
9
12
60
60
80
1.52 0.66 16.8
1.52 0.77 19.6
2.03 0.91 23.1
0.34
0.47
0.65
378
485
643
410
524
698
28
28
20
24
24
17
10(7X)
(5.26mm²)
▲202-31-3707
202-31-3709
202-31-3712
r
be
g
m
Nu
lo
ta
Ca
30
(0.76mm)
30
(0.76mm)
30
(0.76mm)
0.45
0.48
0.56
0.61
G
l
AW ils
na
r
m
o
s
io
m
m
es
t
t
ht
s
c
h
ht
)*
c
u
ig
m
ec
s
s
ne
ig
e
n
d
(1
S
s
s
k
I
m
e
y
d
n
c
W
*
W
ne
ne
.te Co
.ize
ss n.)
Dr city
hi
p
k
k
t
a
i
o
D
D
S
EC (1)
r
l
T
l
s
.
.
c
c
e
i
O
N 00'
O
Cr q. i
of tor on
Sh 00' et o mpa
hi
hi
su ing
or cm
t N ity
.
.
t
.
.
.
r
T
T
n
e
i
c
s
x
d
I
x
o
n
o 10
uc /k
ox
W A
at
ox (
W ac
ox 0
be u
et
et
pr
pr s./ ppr s./1 ºC EC
pr
pr rea
m nd sul ils reen rou
nd WG
ck
ck
ºC mp
Ap
Ap lb
Ap
In m G G
Ap A
Nu Co
Ja
Ja
A lb 90 N
75 A
Co A
UL TYPE: TC-ER
202-31-3813
▲202-31-3823
▲202-31-3833
14(7X)
12(7X)
10(7X)
3
3
3
30
30
30
1#14 45
1#12 45
1#10 60
1.14 .43
1.14 .47
1.52 .56
10.9
11.9
14.2
0.15
0.17
0.25
120
171
242
135
187
248
15
20
30
15
20
30
G
l
AW ils
na
m
or
t
m
m
es
t
tio
t
c
h
c
e
gh
)*
c
m
gh
ei
du
(1
Se
ss
ss
kn
In
m
ei
n
e
e
e
c
ry ity
W
s
i
o
z
*
W
n
n
)
.
.
i
s
D
.
h
p
k
k
C
t
i
EC (1)
T
.D
.D
e '
ro in
h
f
ic
ic
rs
g
r S il
or ac
t N ity
in
.O
. N 000 x. S 00' et mp
to cm
.O
. C sq.
r o cto tion
Th
Th
e
x
d
x
c
x
x
c
e
t
t
k
(
0
u
o
n
o 1
u /
o
W A
a
o
W a
o
b
e
e
pr
pr s./ ppr s./1 ºC EC
pr
pr rea
m nd sul ils are rou
nd WG
ck
ck
ºC mp
Ap
Ap lb
Ap
In m B G
Ap A
Nu Co
Ja
Ja
A lb 90 N
75 A
Co A
ss
r
be
g
lo
ta
Ca
m
Nu
UL TYPE: TC
▲202-31-3653
▲202-31-3753
12(7X)
10(7X)
3
3
30
30
1#12 45
1#10 60
1.14 .47
1.52 .56
▲ Authorized Stock Item. Available from our Service Centers.
Equipment Grounding Conductor: Any conductor in TC rated cables may be permanently
re-identified during Installation as the equipment grounding conductor in accordance
with Section 250.119(B) of the NEC.
†
11.9
14.2
0.17
0.25
141
214
157
230
20
30
20
30
(1) Ampacities
Ampacities are based on Table 310.16 of the National Electrical Code for
XHHW-2 conductors rated 90ºC, in a multi-conductor cable, at an ambient
temperature of 30ºC (86ºF). Derating for more than three current carrying
conductors within the cable is in accordance with NEC Section 310.15(C)(1).
The ampacities shown also apply to cables installed in cable tray in
accordance with NEC Section 392.80
Okonite’s web site, www.okonite.com contains the most up to date information.
Product Data
Section 4: Sheet 8
ils
r
be
g
lo
ta
Ca
m
Nu
ze
Si l
or mi
t
PE
uc /kc
TY
nd WG
o
L
C A
U
112-31-3734
▲112-31-3735
112-31-3736
112-31-3737
TC-ER
TC-ER
8(7X)
(8.36mm²) TC-ER
TC-ER
3
3
4
4
112-31-3746
▲112-31-3747
112-31-3748
112-31-3749
TC-ER
TC-ER
6(7X)
(13.3mm²) TC-ER
TC-ER
3
3
4
4
112-31-3758
▲112-31-3759
112-31-3760
112-31-3761
TC
TC-ER
4(7X)
TC
(21.2mm²)
TC-ER
3
3
4
4
112-31-3764
▲112-31-3765
112-31-3766
112-31-3767
TC
TC-ER
2(7X)
TC
(33.6mm²)
TC-ER
3
3
4
4
112-31-3770
112-31-3771
112-31-3772
112-31-3773
TC
TC-ER
1(19X)
TC
(42.4mm²)
TC-ER
3
3
4
4
112-31-3776
▲112-31-3777
112-31-3778
112-31-3779
TC
1/0(19X) TC-ER
TC
(53.5mm²)
TC-ER
3
3
4
4
112-31-3780
▲112-31-3781
112-31-3782
112-31-3783
TC
2/0(19X) TC-ER
TC
(67.4mm²)
TC-ER
3
3
4
4
112-31-3784
▲112-31-3785
112-31-3786
112-31-3787
TC
4/0(19X) TC-ER
TC
(107mm²)
TC-ER
3
3
4
4
112-31-3788
112-31-3789
112-31-3790
112-31-3791
TC
250(37X) TC-ER
TC
(127mm²)
TC-ER
3
3
4
4
112-31-3792
▲112-31-3793
112-31-3794
112-31-3795
TC
350(37X) TC-ER
TC(177mm²)
TC-ER
3
3
4
4
112-31-3796
▲112-31-3797
112-31-3798
112-31-3799
TC
500(37X) TC-ER
TC
(253mm²)
TC-ER
3
3
4
4
112-31-3800
▲112-31-3801
112-31-3802
112-31-3803
TC
750(61X) TC-ER
TC
(380mm²)
TC-ER
3
3
4
4
112-31-3804
112-31-3805
112-31-3806
112-31-3807
TC
1000(61X) TC-ER
TC
(507mm²)
TC-ER
3
3
4
4
G
W
l
na
rA
ils
m
t
o
es
m
m
t
t
tio
e
h
c
gh
c
c
)
n
c
m
e
gh
ei
(1
du
du
ke
ss
In
ss
m
ei
-S
W
n
n
ry ity
c
e
e
s
i
o
W
o
n
.
n
)
.
D
p
ty
s
h
.
i
t
c
k
k
C
T
h
.D
e
.D
ro in
1) ci
fC
or a
ic
ic
g
n
t ( pa
. S 00'
. N 00'
.O
in
.O
. C sq.
et mp
ro
Th
Th
io
e
x
x
x
x
d
t
x
m
e
t
t
(
0
A
0
o
W
o
o
o
n
W A
o
b
e
e
la
pr ./1 ppr s./1
pr
pr
pr rea
m
ºC EC
ou
ck
ck
ºC C
su
A lb
Ap lbs
Ap
In
90 N
Ap
Ap A
Nu
Gr
Ja
Ja
75 NE
45
45
45
45
55
55
55
55
65
65
65
80
80
-m
to
rs
ss
─
10
─
10
60
60
60
60
1.52
1.52
1.52
1.52
0.64
0.66
0.70
0.72
16.3
16.7
17.8
18.3
0.32
0.34
0.39
0.41
259
313
331
385
298
352
370
424
55
55
44
44
50
50
40
40
─
8
─
8
60
60
60
60
1.52
1.52
1.52
1.52
0.71
0.74
0.78
0.82
18.0
18.8
19.8
20.8
0.40
0.43
0.48
0.53
365
440
471
552
404
479
510
616
75
75
60
60
65
65
52
52
─
8
─
8
60
60
80
80
1.52
1.52
2.03
2.03
0.81
0.81
0.93
0.96
20.6
20.6
23.6
24.4
0.52
0.52
0.68
0.72
527
662
720
808
566
715
784
872
95
95
76
76
85
85
68
68
─
6
─
6
80
80
80
80
2.03
2.03
2.03
2.03
0.97
0.97
1.07
1.11
24.6
24.6
27.2
28.2
0.74
0.74
0.90
0.97
816
1018
1060
1196
880
1098
1140
1276
130
130
104
104
115
115
92
92
─
6
─
6
80
80
80
80
2.03
2.03
2.03
2.03
1.09
1.09
1.20
1.20
27.7
27.7
30.5
30.5
0.93
0.93
1.13
1.13
1051
1127
1355
1431
1118
1194
1435
1511
145
145
116
116
130
130
104
104
─
6
─
6
80
80
80
80
2.03
2.03
2.03
2.03
1.17
1.17
1.29
1.29
29.7
20.7
32.8
32.8
1.08
1.08
1.31
1.31
1274
1350
1652
1729
1354
1430
1752
1829
170
170
136
136
150
150
120
120
─
6
─
6
80
80
80
80
2.03
2.03
2.03
2.03
1.26
1.26
1.39
1.39
32.0
32.0
35.3
35.3
1.25
1.25
1.52
1.52
1561
1639
2033
2109
1661
1739
2149
2225
195
195
156
156
175
175
140
140
─
4
─
4
80
80
80
80
2.03
2.03
2.03
2.03
1.47
1.47
1.63
1.63
37.3
37.3
41.4
41.4
─
─
─
─
2361
2488
3101
3222
2504
2631
3278
3399
260
260
208
208
230
230
184
184
─
4
─
4
80
80
110
110
2.03
2.03
2.79
2.79
1.62
1.62
1.85
1.85
41.2
41.2
47.0
47.0
─
─
─
─
2796
2917
3778
3899
2939
3060
4044
4165
290
290
232
232
255
255
204
204
─
3
─
3
110
110
110
110
2.79
2.79
2.79
2.79
1.88
1.88
2.08
2.08
47.8
47.8
52.8
52.8
─
─
─
─
3889
4044
5091
5245
4155
4310
5438
5592
350
350
280
280
310
310
248
248
─
2
─
2
110
110
110
110
2.79
2.79
2.79
2.79
2.13
2.13
2.36
2.36
54.1
54.1
59.9
59.9
─
─
─
─
5386
5581
7082
7276
5733
5928
7641
7835
430
430
344
344
380
380
304
304
─
1
─
1
110
110
140
140
2.79
2.79
3.56
3.56
2.56
2.56
2.90
2.90
65.0
65.0
73.7
73.7
─
─
─
─
7961 8520
8206 8833
10632 11394
10879 11641
535
535
428
428
475
475
380
380
─
1/0
─
1/0
140
140
140
140
3.56
3.56
3.56
3.56
2.93
2.93
3.25
3.25
74.4
74.4
82.6
82.6
─
─
─
─
10584
10894
13925
14235
615
615
492
492
545
545
436
436
NOTE: Sizes 4 AWG & larger without a grounding conductor are Type TC only (Not ER rated).
11346
11656
14858
15168
X-Olene-Okoseal
Product Data
UL Type TC/TC-ER (XHH/XHHW-2) and cUL CIC-TC*
600/1000 Volt Power and Control Tray Cable
Multiple Copper Conductors, 90°C Wet or Dry
With or Without Grounding Conductor
For Cable Tray Use - Sunlight Resistant - For Direct Burial
*cUL CIC-TC-ER sizes 1-4/0 AWG
UL
®
Section 4: Sheet 8
®
Conductor Color Coding Sequence
Ungrounded
Conductor
Number
Base Color
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
Black
Red
Blue
Orange
Yellow
Brown
Red
Blue
Orange
Yellow
Brown
Black
Blue
Orange
Yellow
Brown
Black
Red
Orange
Yellow
Brown
Black
Red
Blue
Yellow
Brown
Black
Red
Blue
Orange
Brown
Black
Red
Blue
Orange
Yellow
Black
Tracer Color
Color Coding
Sizes 14,12 & 10 AWG:
per ICEA Method 1, E-2 color sequence
Black
Black
Black
Black
Black
Red
Red
Red
Red
Red
Blue
Blue
Blue
Blue
Blue
Orange
Orange
Orange
Orange
Orange
Yellow
Yellow
Yellow
Yellow
Yellow
Brown
Brown
Brown
Brown
Brown
Sizes 8 AWG and larger:
Surface Printing of Numbers and color
designation per ICEA Method 3, E-2
color sequence
Special Order: Any or all of the following conductors may be added when
specifically requested by the customer to meet their specific application
requirements. These conductor codings comply with UL and NEC requirements.
Purpose
Base Color
Tracer Color
Equipment Grounding
Uninsulated
Green
Green
1 or more continuous yellow stripes
White
White
White
White
White
White
White
Black continuous stripe
Red continuous stripe
Blue continuous stripe
Orange continuous stripe
Brown continuous stripe
Numeric Printing
Grounded
THE OKONITE COMPANY
P/22030408
Ramsey, New Jersey 07446
Product Data
Section 5: Sheet 49
â
â
C-L-X X-Olene
SP-OS
UL
R
c UL
R
UL Type MC-HL, PLTC, ITC-HL and cUL ACIC-TC Instrumentation Cable
Multiple Shielded Pairs/Triads - Overall Shield
600 Volts 90°C Rating: UL MC-HL and cUL ACIC-TC
300 Volts 90°C Rating: UL PLTC & ITC-HL
For Cable Tray Use Sunlight Resistant For Direct Burial -50°C
Specifications
Conductors: Bare copper, Class B,
stranded per ASTM B8.
â
Insulation: X-Olene (XLPE), per UL 13,
2250 & 1569, 30 mils nominal thickness,
90°C temperature rating. Meets
MIL-DTL-1377H, section 4.8.4.1.2 Cold
Bend at -66°C and ASTM D746-04
brittlepoint at -76°C.
Conductor Identification: Pigmented
black and white in pairs, black, red and
white in triads; white conductor numerically
printed for group identification.
Pair Shield: Aluminum/Polyester tape
overlapped to provide 100% coverage, and
a Class B tin coated copper drain wire, two
sizes smaller than the conductor. All
multi-pair shields are isolated from each
other.
(UL) TYPE PLTC or ITC-HL90C
Multiple Pair Assembly: Pairs/triads assembled with a left-hand lay. Cable fillers
included where required to provide a round
cable.
A Copper Stranded Conductor
B X-Olene Insulation
C Tin Coated Copper Group
Drain Wire
D Aluminum/Polyester Tape
E Twisted, Shielded Pairs
F Aluminum/Polyester Tape
G Tin Coated Copper Drain
Wire
H Rip Cord
J Inner Okoseal Jacket
K Impervious, Continuous, Corrugated
Aluminum C-L-X Sheath
L Outer Okoseal Jacket
Multiple Pair Cable Shield: Aluminum/Polyester tape overlapped to provide
100% coverage, and a class B strand tin
coated copper drain wire, same size as
conductor.
Inner Jacket: Black, flame-retardant, low
temperature Okoseal® (PVC) per UL 13
and UL 2250. The inner jacket meets the
thickness requirements of UL 1277. A rip
cord is laid longitudinally under the jacket
to facilitate removal.
C-L-X Sheath: A close-fitting, impervious,
continuously welded and corrugated, aluminum sheath provides complete
protection against moisture, liquids, and
gases, has excellent mechanical strength,
and provides equipment grounding through
the sheath.
Outer Jacket: Black, flame-retardant, low
temperature Okoseal per UL 13 and UL
2250.
Applications
These cables eliminate the need for conduit. Can be installed as Type PLTC in
accordance with Article 722, and as Type
ITC in accordance with Article 335 of the
2023 National Electrical Code.
They can also be installed as Type MC-HL
and Type ITC-HL in Class I, II, and III, Divisions 1 and 2 hazardous location in
accordance with NEC Articles 501, 502,
503, & 505; in Zone 2 per CEC for conductors
#14 AWG & larger.
The isolated individual shields over each pair, in
SP-OS cables, when properly grounded, prevent crosstalk or capacitive coupling between
adjacent pairs while the overall shield eliminates most of the static interference from the
electrical field radiated by power cables and
other electrical equipment.
Product Features
Complete pre-packaged, factory-tested wiring
system-color coded.
C-L-X enclosure permits installation in cable
tray containing lighting and power cables without a barrier separator.
Lower installed system cost than conduit or
EMT systems.
Applicable Standards
• UL listed for cable tray use, direct burial, in
ducts, and sunlight resistant.
• Vertical Tray Flame Tests;
IEEE 383-1974 & FT4/IEEE 1202.
• UL listed at -50°C. Also, meets the CSA 22.2
No.3 Cold Impact Test at -45°C.
• UL 13 Type PLTC & UL 2250 Type ITC.
• UL 2225 Type MC-HL & UL 1569.
• CSA C22.2 No. 230 Type TC
• CSA C22.2 No. 239 type ACIC
• cUL listed as Type ACIC-TC complies with CEC
Zone 2 Hazardous Locations.
UL c UL
C-L-Xâ X-Oleneâ SP-OS
R
R
UL Type MC-HL, PLTC, ITC-HL and cUL ACIC-TC Instrumentation Cable
Product Data
Section 5: Sheet 49
Multiple Shielded Pairs/Triads - Overall Shield
600 Volts 90°C Rating: UL MC-HL and cUL ACIC-TC
300 Volts 90°C Rating: UL PLTC & ITC-HL
N
um
be
ro
N
fP
um
ai
be
rs
ro
fT
In
n
ria
Th er
ds
ic Ja
kn ck
es et
s
N
-m
om
O in
ils
.D a
.I lC
nc o
he re
s
C
-L
-X
O
.D
.I
O
nc
ut
he
er
s
Ja
ck
N
et
o
m
O min
ils
.D a
.- lC
In a
ch b l
es e
C
ro
A ss
re -S
a ec
= ti
(s o
q na
in l
A
pp
)
ro
(lb x
s/ Ne
10 t
W
A
pp 00’ e
) ig
r
ht
(lb ox
s/ Sh
10 ip
00 W
’) e
ig
ht
C
at
al
og
N
um
be
r
For Cable Tray Use Sunlight Resistant For Direct Burial -50°C
#16 AWG
567-70-3402
567-70-3404
567-70-3408
567-70-3412
567-70-3424
567-70-3436
2
4
8
12
24
36
567-71-3402
567-71-3404
567-71-3408
567-71-3412
567-71-3424
2
4
8
12
24
60
60
80
80
80
110
0.58
0.70
0.92
1.10
1.44
1.82
0.80
0.93
1.19
1.37
1.78
2.19
50
50
50
50
60
60
0.91
1.04
1.30
1.48
1.91
2.32
0.65
0.85
1.33
1.73
2.87
4.23
325
424
650
842
1450
2145
405
504
752
985
1640
2480
60
60
80
80
80
0.64
0.75
1.06
1.26
1.65
0.89
1.02
1.34
1.56
2.01
50
50
50
60
60
1.00
1.13
1.45
1.69
2.14
0.79
1.00
1.64
2.24
3.61
376
500
800
1090
1914
456
580
945
1235
2199
45
60
60
80
80
80
0.50
0.67
0.83
1.00
1.34
1.55
0.71
0.89
1.06
1.29
1.64
1.92
50
50
50
50
60
60
0.82
1.00
1.17
1.40
1.78
2.05
0.53
0.79
1.08
1.54
2.48
3.29
253
365
503
693
1125
1545
333
445
583
799
1290
1835
60
60
80
80
80
0.62
0.73
0.98
1.15
1.58
0.84
0.97
1.24
1.47
1.96
50
50
50
50
60
0.95
1.08
1.35
1.58
2.09
0.71
0.92
1.43
1.96
3.42
326
428
658
860
1505
406
508
764
1003
1760
#18 AWG
567-70-3302
567-70-3304
567-70-3308
567-70-3312
567-70-3324
567-70-3336
567-71-3302
567-71-3304
567-71-3308
567-71-3312
567-71-3324
2
4
8
12
24
36
2
4
8
12
24
ELECTRICAL SPECIFICATIONS
Conductor Resistance, nominal - ohms/1000 ft......@20°C ..........@25°C
16 AWG ................................................................4.34 .................4.43
18 AWG ................................................................6.93 .................7.07
Insulation Test Voltage (spark test) ....................................7500 Volts ac
Dielectric Test Voltage .......................................................3000 Volts ac
Insulation Resistance Constant @60°F minimum ...10,000 ohms-1000 ft.
Loop Resistance, nominal (2 cdr.) - ohms/1000 ft .@20°C ..........@25°C
16 AWG .................................................................8.68 .................8.86
18 AWG .................................................................13.9 .................14.2
= Cross-sectional area for calculation of cable tray fill in
accordance with NEC Section 392.22.
Jackets - Optional jacket types available - consult local
sales office.
Copper or bronze C-L-X available on special order.
To order without the outer Okoseal jacket (not "HL" listed),
change the sixth digit of the catalog number from 3 to 1, for
example to order 2 pr. 16 AWG with a bare aluminum C-L-X,
the catalog number would be 567-70-1402.
Length Tolerance: Cut lengths of 1000 feet or longer are
subject to a tolerance of ± 10%; less than 1000 feet ± 15%.
Mutual Capacitance (PF/ft.)*
#16 ....................................................................................................23
#18 ....................................................................................................21
*Typical Value
L/23060549
THE OKONITE COMPANY
Ramsey, New Jersey 07446
Product Data
Section 5: Sheet 50
®
X-Olene Okoseal
®
UL c UL
®
®
UL Type TC-ER/ITC -ER and cUL Type CIC-TC*
or Oko-Marine Cable
600 Volt Instrumentation/Signal Cable
600/1000V Marine Shipboard Cable
Single Pair/Triads or Multiple Pairs/Triads Type P-OS
For Cable Tray Use - Sunlight Resistant - For Direct Burial
*cUL CIC-TC-ER sizes 14 AWG & larger
Insulation
E
A
B
C
G
F
OKONITE 6 P-OS 1 PR 16 AWG CU X-OLENE (XLPE)
OKONITE 6 P-OS 12 PR 16 AWG CU X-OLENE (XLPE)
D
A Copper Strand Conductor
B X-Olene Insulation
C Tinned Stranded Copper Drain Wire
D Aluminum/Polyester Tape
E Twisted Pairs
F Rip Cord
G Okoseal Jacket
triads; white conductor numerically printed
®
X-Olene is Okonite's trade name for
for group identification.
its cross-linked polyethylene (XLPE)
Cable Shield: Aluminum/Polyester tape
insulation, with high dielectric strength. overlapped to provide 100% coverage, and
a tinned-copper Class M drain wire same
Cable Jacket
size as conductor. All multi-unit shields are
The Okoseal (PVC) jacket supplied
with this cable is mechanically rugged isolated from each other.
Multiple Unit Assembly: Pairs/Triads
and has excellent resistance to acids
assembled with a left-hand lay.
and most chemicals and is rated for
Jacket: Black Okoseal jacket. Complies
low temperature installations.
with UL 1277, UL 2250, UL 1309 & IEEE
Applications
1580 Type T, thermoplastic polyvinyl
X-Olene Okoseal 600 volt shielded
chloride jacket.
instrumentation cables are designed
UL Listed as Type TC-ER cable with a
for use in rugged plant environments,
sunlight resistant jacket and for direct
such as Offshore Rig Projects, on
burial.
Class 1 Remote-Control Signaling
UL Listed as Type ITC-ER cable with a
circuits or where a 600V
sunlight resistant jacket and for direct
instrumentation or control cable is
burial.
desired.They are designed for use
UL Listed as Type OKO-MARINE signal
indoors or outdoors; wet or dry
cable to the requirements of UL 1309. Also,
locations; in cable trays; in raceways;
UL certified as meeting the requirements of
supported by a messenger wire; and
IEEE 1580 — Marine Cable.
for direct burial. Can be installed as
Product Features
Type TC/ITC in Class I, Division 2;
• For cable tray use and direct burial.
Class II, Division 2; Class III, Division
• Sunlight resistant.
1; and Zone 2 hazardous locations in
accordance with NEC Articles 501.10, • Insulated conductors are UL rated 90°C
continuous rating in wet or dry locations.
502.10, 503.10, and 505.15.
• Flame Retardant - passes the vertical tray
TC-ER (Tray Cable - Exposed Run)
flame test requirements of IEEE 383-1974
eliminates the need for conduit when
& 1202-2010 and UL 1277.
installed in accordance with NEC
• X-Olene Okoseal Type TC-ER/ITC-ER
Article 336.10(7). These cables are
cables are quality control inspected to meet
also UL labeled Okomarine and are
or exceed applicable industry standards.
listed for marine applications.
• Resistant to moisture and most chemical
atmospheres.
• Thermal stability at elevated
Specifications
temperatures.
Insulated Conductors: Bare soft
• CSA C22.2 No. 239 & 230 Type
annealed copper, Class B stranded
CIC-TC (Type CIC-TC-ER for 14 AWG and
per ASTM B8.
Insulation: X-Olene® (XLPE), 30 mils larger).
• CSA C22.2 No. 245 Type Marine
nominal thickness, 90°C temperature
rating. Meets or exceeds requirements Shipboard.
• Passes -35°C cold bend test.
of UL 1277, UL 2250, UL 1309 Type
X90 and IEEE 1580 Type X crosslinked polyethylene insulation.
Color Coding: Pigmented black and
white in pairs, black, red and white in
®
X-Olene Okoseal
®
UL Type TC-ER/ITC -ER and cUL Type CIC-TC*
or Oko-Marine Cable
UL
600 Volt Instrumentation/Signal Cable
600/1000V Marine Shipboard Cable
Single Pair/Triads or Multiple Pairs/Triads Type P-OS
For Cable Tray Use - Sunlight Resistant - For Direct Burial
*cUL CIC-TC-ER sizes 14 AWG & larger
®
Product Data
c UL
Section 5: Sheet 50
®
ils
t
gh
ht
ei
ig
l
e
a
W
e
n .)
i
n
b
bl s
ip )
tW
Pa f Tr
m
tio in
ck
Ca che ec sq.
Ne 00’)
Sh 00’
o
hi
of
Nu
l
.
.
(
T
r
r
S
a
g
ox 10
ox /10
in In ss- a †
et
be
be
lo
pr s./
pr s.
m .m
m ack
o e
ta
Ap (lb
No O.D Cr Ar
Ap (lb
Nu
J
Nu
Ca
er
irs
s
ad
s
es
-m
#16 AWG
▲267-40-3401
▲267-41-3401
1
45
45
0.35
0.37
0.10
0.11
77
89
85
97
267-40-3402
267-40-3404
267-40-3408
267-40-3412
2
4
8
12
45
60
80
80
0.52
0.68
0.90
0.99
0.22
0.36
0.57
0.77
173
244
415
521
178
278
430
606
267-40-3416
267-40-3420
267-40-3424
267-40-3436
16
20
24
36
80
80
80
80
1.18
1.31
1.40
1.60
1.10
1.35
1.54
2.01
684
816
937
1299
756
915
1094
1433
1
268-38-4402
268-38-4404
268-38-4408
268-38-4412
2
4
8
12
60
60
80
80
0.65
0.78
1.02
1.21
0.33
0.47
0.81
1.14
240
307
559
742
261
366
617
809
268-38-4416
268-38-4420
268-38-4424
16
20
24
80
80
80
1.36
1.50
1.63
1.46
1.77
2.09
931
1118
1296
1083
1246
1430
1
45
45
0.37
0.40
0.11
0.13
99
103
115
131
#14 AWG
267-40-3501
267-41-3501
1
267-40-3502
267-40-3504
267-40-3508
267-40-3512
2
4
8
12
60
60
80
80
0.59
0.72
0.97
1.15
0.27
0.41
0.74
1.03
237
337
570
732
258
366
620
799
267-40-3516
267-40-3520
267-40-3524
267-40-3536
16
20
24
36
80
80
80
110
1.29
1.42
1.57
1.57
1.31
1.59
1.93
2.92
914
1088
1264
1189
1066
1247
1398
2198
267-38-3502
267-38-3504
267-38-3508
267-38-3512
2
4
8
12
60
60
80
80
0.63
0.77
1.03
1.22
0.31
0.46
0.84
1.18
291
430
731
978
314
459
789
1103
267-38-3516
267-38-3520
267-38-3524
16
20
24
80
80
80
1.38
1.52
1.68
1.49
1.82
2.22
1238
1496
1748
1390
1630
1972
ELECTRICAL SPECIFICATIONS
Conductor Resistance, nominal-ohms/1000 f..........@20°C..........@25°C
16 AWG ....................................................................4.34................4.43
14 AWG ....................................................................2.68................2.73
Insulation Test Voltage (spark test)....................................8000 Volts ac
Dielectric Test Voltage ........................................................1500 Volts ac
Insulation Resistance Constant @60°F minimum...10,000 ohms-1000 ft.
Loop Resistance, nominal (2 cdr.) - ohms/1000 ft @20°C............@25°C
16 AWG ..................................................................8.68...................8.86
14 AWG...................................................................5.36...................5.46
Mutual Capacitance (PF/ft.)*
#16......................................................................................................23
#14......................................................................................................25
*Typical Value
▲ Authorized Stock Item. Available from our Customer
Service Centers.
† Cross-sectional area for calculation of cable tray fill in
accordance with NEC Section 392.22.
Length Tolerance: Cut lengths of 1000 feet or longer are
subject to a tolerance of ± 10%; less than 1000 feet ± 15%.
THE OKONITE COMPANY
P/23050550
Ramsey, New Jersey 07446
Product Data
Section 5: Sheet 51
®
X-Olene Okoseal
UL c UL
®
®
®
UL Type TC-ER/ITC -ER and cUL Type CIC-TC*
or Oko-Marine Cable
OKONITE 6 SP-OS 12 PR 16 AWG CU X-OLENE (XLPE)
600 Volt Instrumentation/Signal Cable
600/1000V Marine Shipboard Cable
Multi-Pair: Type SP-OS
For Cable Tray Use - Sunlight Resistant - For Direct Burial
*cUL CIC-TC-ER sizes 14 AWG & larger
printed for group identification.
Insulation
A Copper Stranded Conductor
B X-Olene Insulation
C Tinned Stranded Copper Group Drain
Wire
D Aluminum/Polyester Tape
E Twisted, Shielded Pairs
F Aluminum/Polyester Tape
G Tinned Stranded Copper Drain Wire
H Rip Cord
J Okoseal Jacket
®
Unit Shield: Aluminum/Polyester tape
X-Olene is Okonite's trade name for
overlapped to provide 100% coverage, and
its cross-linked polyethylene (XLPE)
insulation, with high dielectric strength. a tinned-copper Class M drain wire, two
sizes smaller than conductor. All multi-unit
Cable Jacket
shields are isolated from each other.
The Okoseal (PVC) jacket supplied
with this cable is mechanically rugged Multiple Unit Assembly: Pairs/Triads
assembled with a left-hand lay.
and has excellent resistance to acids
Multiple Unit Cable Shield:
and most chemicals and is rated for
Aluminum/Polyester tape overlapped to
low temperature installations.
provide 100% coverage, and a class M
Applications
strand tinned copper drain wire, same size
X-Olene Okoseal 600 volt shielded
as the conductor.
instrumentation cables are designed
Jacket: Black Okoseal jacket. Complies
for use in rugged plant environments,
with UL 1277, UL 2250, UL 1309 & IEEE
such as Offshore Rig Projects, on
1580 Type T, thermoplastic polyvinyl
Class 1 Remote-Control Signaling
chloride jacket.
circuits or where a 600V
UL Listed as Type TC-ER cable with a
instrumentation or control cable is
sunlight resistant jacket and for direct
desired.They are designed for use
burial.
indoors or outdoors; wet or dry
locations; in cable trays; in raceways; UL Listed as Type ITC-ER cable with a
sunlight resistant jacket and for direct
supported by a messenger wire; and
burial.
for direct burial. Can be installed as
UL Listed as Type OKO-MARINE signal
Type TC/ITC in Class I, Division 2;
cable to the requirements of UL 1309. Also,
Class II, Division 2; Class III, Division
UL certified as meeting the requirements of
1; and Zone 2 hazardous locations in
accordance with NEC Articles 501.10, IEEE 1580 — Marine Cable.
502.10, 503.10, and 505.15.
TC-ER (Tray Cable - Exposed Run)
eliminates the need for conduit when
installed in accordance with NEC
Article 336.10(7). These cables are
also UL labeled Okomarine and are
listed for marine applications.
Product Features
• For cable tray use and direct burial.
• Sunlight resistant.
• Insulated conductors are UL rated 90°C
continuous rating in wet or dry locations.
• Flame Retardant - passes the vertical tray
flame test requirements of IEEE 383-1974
& 1202-2010 and UL 1277.
• X-Olene Okoseal Type TC-ER/ITC-ER
cables are quality control inspected to meet
Specifications
or exceed applicable industry standards.
Insulated Conductors: Bare soft
• Resistant to moisture and most chemical
annealed copper, Class B stranded
atmospheres.
per ASTM B8.
Insulation: X-Olene® (XLPE), 30 mils • Thermal stability at elevated
temperatures.
nominal thickness, 90°C temperature
rating. Meets or exceeds requirements • CSA C22.2 No. 239 & 230 Type
CIC-TC (Type CIC-TC-ER for 14 AWG and
of UL 1277, UL 2250, UL 1309 Type
larger).
X90 and IEEE 1580 Type X cross• CSA C22.2 No. 245 Type Marine
linked polyethylene insulation.
Shipboard.
Color Coding: Pigmented black and
• Passes -35°C cold bend test.
white in pairs, black, red and white in
triads; white conductor numerically
®
X-Olene Okoseal
®
UL Type TC-ER/ITC -ER and cUL Type CIC-TC*
or Oko-Marine Cable
UL c UL
600 Volt Instrumentation/Signal Cable
®
Product Data
Section 5: Sheet 51
®
600/1000V Marine Shipboard Cable
Multi-Pair: Type SP-OS
For Cable Tray Use - Sunlight Resistant - For Direct Burial
*cUL CIC-TC-ER sizes 14 AWG & larger
ils
t
gh
ht
ei
ig
l
s
e
a
W
)
r
a
e
.
i
n
l
W
b
ri
p
a
kn
m
ab es ctio . in
hi ’)
et ’)
fT
ic
fP
Nu
l C nch -Se (sq
. S 000
. N 000
r o er o t Th
a
x
x
g
e
I
o /1
o 1
s †
in
e
b
b
lo
pr s.
pr s./
m .m
m ack
os ea
ta
Ap (lb
Ap (lb
No O.D Cr Ar
Nu
J
Nu
Ca
ds
er
s
es
-m
#16 AWG
▲268-40-3402
2
▲268-40-3404
4
▲268-40-3408
8
▲268-40-3412 12
60
60
80
80
0.59
0.68
0.90
1.06
0.28
0.37
0.65
0.91
201
264
457
681
225
303
521
698
268-40-3416
268-40-3420
▲268-40-3424
268-40-3436
80
80
80
110
1.23
1.34
1.44
1.82
1.22
1.44
1.66
2.68
804
960
1086
1687
890
1044
1213
1837
16
20
24
36
▲268-41-3402
▲268-41-3404
▲268-41-3408
▲268-41-3412
2
4
8
12
60
60
80
80
0.66
0.78
1.03
1.22
0.35
0.49
0.85
1.19
245
335
605
806
287
374
668
912
268-41-3416
268-41-3420
▲268-41-3424
16
20
24
80
80
80
1.38
1.52
1.65
1.52
1.86
2.18
1045
1234
1439
1128
1377
1582
#14 AWG
268-40-3502
268-40-3504
268-40-3508
268-40-3512
2
4
8
12
60
60
80
80
0.65
0.73
0.98
1.16
0.33
0.42
0.75
1.06
267
354
621
848
288
403
688
923
268-40-3516
268-40-3520
268-40-3524
268-40-3536
16
20
24
36
80
80
80
110
1.32
1.46
1.56
1.90
1.37
1.67
1.91
2.83
1053
1297
1507
2266
1233
1464
1648
2571
268-41-3502
268-41-3504
268-41-3508
268-41-3512
2
4
8
12
60
60
80
80
0.69
0.77
1.04
1.24
0.37
0.47
0.85
1.21
322
443
790
1094
351
496
859
1228
268-41-3516
268-41-3520
268-41-3524
16
20
24
80
80
80
1.42
1.56
1.67
1.58
1.91
2.19
1376
1707
1955
1559
1840
2216
ELECTRICAL SPECIFICATIONS
Conductor Resistance, nominal-ohms/1000 f..........@20°C..........@25°C
16 AWG ....................................................................4.34................4.43
14 AWG ....................................................................2.68................2.73
Insulation Test Voltage (spark test)....................................8000 Volts ac
Dielectric Test Voltage ........................................................1500 Volts ac
Insulation Resistance Constant @60°F minimum...10,000 ohms-1000 ft.
Loop Resistance, nominal (2 cdr.) - ohms/1000 ft @20°C............@25°C
16 AWG ..................................................................8.68...................8.86
14 AWG...................................................................5.36...................5.46
Mutual Capacitance (PF/ft.)*
#16......................................................................................................23
#14......................................................................................................25
*Typical Value
▲ Authorized Stock Item. Available from our Customer Service Centers.
† Cross-sectional area for calculation of cable tray fill in accordance with
NEC Section 392.22.
Length Tolerance: Cut lengths of 1000 feet or longer are subject to a
tolerance of ± 10%; less than 1000 feet ± 15%.
THE OKONITE COMPANY
E/23050551
Ramsey, New Jersey 07446
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-EE-0-000027 – REV A
General Aarrangement & Technical Data Sheet
of Cables (Power and Control Cable) –
Electrical & Instrument - WEA
V-VME-STP-EE-0-000024
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
Pikka Development Project
General arrangement & Technical Data Sheet of Cables
(Power and Control Cable) – Electrical & Instrument - WEA
Document number – V-VME-STP-EE-0-000024
Rev 1
4/24/2024 – Re-Issued for Construction
PIKKA DEVELOPMENT PROJECT
GENERAL ARRANGEMENT & TECHNICAL DATA SHEET OF CABLES (POWER & CONTROL CABLE) ELECTRICAL & INSTRUMENT CABLE – WEA
V-VME-STP-EE-0-000024 – REV 1
CONTRACTOR DOC NO.: 200177-VME-EL-DW-035000
SUB-CONTRACTOR DOC NO.:
DOCUMENT CONTROL
The controlled copy of this document can be accessed from the Electronic Santos Alaska Project Document
Management System – Aconex. Printed copies are not controlled.
REVISION HISTORY
REV
Date
Originator
Checked
Approved
AA
16/10/23
Issued for Review
J. EBORA
J.WONG
V.TOH
0
7/12/23
Issued for Construction
J. EBORA
J.WONG
V.TOH
1
24/4/24
Re-issued for Construction
J. EBORA
J. KEE
V.TOH
Click here
to enter a
Click here
to enter a
CHANGE LOG
REV
CHANGE
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
Applicable ICEA and/orAEIC and/or UL specifications
3.5
10000
5
1.71
Pass
Pass
6
Product Data Sheet
546-31-3942
3/C
600V Rated,
Power Cable
CONDUCTOR:
#12 AWG 7X Compressed Class B Strand Copper
INSULATION:
030 X-Olene® Crosslinked Polyethylene (XLP)
Type MC-HL (XHHW-2)
ICEA Method 1, Black/White
COLOR CODE:
INTERSTICE FILLERS:
Polypropylene Fillers
BINDER TAPE:
Binder Tape
ARMOR:
Aluminum C-L-X® Sheath
050 LT/FR OKOSEAL® PVC (Polyvinyl
Chloride)
OUTER JACKET:
GROUND:
C-L-X®
One #12 AWG 7X Bare Copper 030 Green X-Olene®
Dimensions
Thickness (in.)
Diameter (in.)
Nominal
Nominal
Conductor
N/A
0.090
Insulation
0.030
0.154
Cable Description
2/C #12 7X COPPER - 030
X-OLENE XLP - METH 1-(BLK/WHT)
CABLED W/1 #12 7X COPPER 030 GREEN X-OLENE XLP GRD WIRE FILL - TAPE - ALUMINUM CLX - 050 LT/FR
OKOSEAL PVC - SEQ PRINT 600V MC-HL
TEMPERATURE RATINGS
90°C- Continuous, Wet or Dry
130°C - Emergency Overload
250°C - Short Circuit
For Cable Tray Use
Armor
Outer Jacket
0.532
0.050
0.642
Cable Weight (lbs./M'):
198
Industry Standards:
ICEA S-95-658 & S-73-532, UL Type MC-HL, SUN RES, DIR BUR, XHHW-2.
IEEE 1202/FT4 For Cable Tray Use. UL 1569 & 2225.
Print Legend:
OKONITE 6 2/C 12 AWG CU 600V 1X12 AWG CU GRD CLX (UL) MC-HL XHHW-2 SUN RES FOR CT USE FT4 DIR BUR
-40C OR UL1309 (UL) CLXM-CWCMC 600/1000V 90C 2020 CLASSIFIED IN ACCORDANCE WITH IEEE 1580-2010
CONT/DIST 600/1000V OR ABS OR CSA RA90 XLPE (-40C) 600V FT4 SR HL & SEQ. FOOTAGE
APPROVED BY:
Date:
Okonite Product Code 546-31-3942
PREP. BY
SCALE
RWP
None
OKONITE MANUFACTURED SPECIAL
SERIAL NO.
07846 M
DRAWING NO.
S - 31666
Cable Image is representative and meant to display individual cable components and is not to scale.
Cable Dimensions are Subject to Normal Manufacturing Tolerances.
www.okonite.com
05/20/20
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-EE-0-000027– REV A
General Arrangement & Technical Data Sheet of
Cables (Instrument Cable) - Electrical &
Instrument Cable - WEA
V-VME-STP-IC-0-000042
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
Pikka Development Project
General Arrangement & Technical Data Sheet of Cables (Instrument
Cable) - Electrical & Instrument Cable - WEA
Document number – V-VME-STP-IC-0-000042
Rev 0
4/24/2024 – Issued for Construction
PIKKA DEVELOPMENT PROJECT
GENERAL ARRANGEMENT & TECHNICAL DATA SHEET OF CABLES (INSTRUMENT CABLE) ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-IC-0-000042 – REV 0
CONTRACTOR DOC NO.: 200177-VME-IN-DW-035000
SUB-CONTRACTOR DOC NO.:
DOCUMENT CONTROL
The controlled copy of this document can be accessed from the Electronic Santos Alaska Project Document
Management System – Aconex. Printed copies are not controlled.
REVISION HISTORY
REV
Date
A
16/10/23
0
24/4/24
Originator
Checked
Approved
Issued for Review
J. EBORA
J.WONG
V.TOH
Issued for Construction
J. EBORA
J. KEE
V.TOH
Click here
to enter a
Click here
to enter a
CHANGE LOG
REV
CHANGE
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-EE-0-000027 – REV A
Inspection Test Plan - Electrical & Instrument
Cable - WEA
V-VME-STP-QA-0-000309
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
Pikka Development Project
Inspection Test Plan - Electrical & Instrument Cable - WEA
Document number – V-VME-STP-QA-0-000309
Rev 1
02/1/2024 – Re-issued for Construction
PIKKA DEVELOPMENT PROJECT
INSPECTION TEST PLAN - ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-QA-0-000309 – REV 1
CONTRACTOR DOC NO.: 200177-VME-QA-SP-035001
SUB-CONTRACTOR DOC NO.:
DOCUMENT CONTROL
The controlled copy of this document can be accessed from the Electronic Santos Alaska Project Document
Management System – Aconex. Printed copies are not controlled.
REVISION HISTORY
REV
Date
Originator
Checked
Approved
A
16/12/23
Issued for Review
J. EBORA
J. WONG
V.TOH
0
07/12/23
Issued for Construction
J. EBORA
V. TOH
V.TOH
1
01/02/24
Re-issued for Construction
J. EBORA
V. TOH
V.TOH
Click here
to enter a
Click here
to enter a
CHANGE LOG
REV
CHANGE
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
Page 1 of 1
January 25, 2024
Plan # 2024-03
Revision 0
THE OKONITE COMPANY
Ramsey, New Jersey 07446
r.dilorenzo@okonite.com
Test Plan For
Wholesale Electric / WEA Singapore Sales
Factory Orders: 15-6110 & 15-6111, PO# 2300572
This sample Test Plan describes the basic inspection/quality requirements for the Okonite cable
described below.
Applicable Industry Standards:
UL 1569 - Metal Clad Cable (E38916)
Construction:
3/C, 350 Class B Copper C-RD, 065 X-Olene XLP, MTHD 3-UL-E2 CC,
Cabled W/1 #3 Class B Copper C-RD DRD Wire, Fill, Tape, 110 LT/FR
Okoseal PVC, Seq Print, 600V
Product Code:
112-31-3793
In Process Tests/Requirements
Insulation:
Min average 65 mils
Min point 59 mils
Insulation Spark Test:
17.5 KV
Pass
Jacket Thickness:
Min average 110 mils
Min point 85 mils
Jacket Spark Test:
7.5KV
No Sparkouts
Final Testing
Conductor Resistance:
AC Withstand:
IR Constant, min., 15.6C
Grounding Conductor
0.0314 Maximum Ohms per 1000' @ 25C
5.0 KV for 5 minutes
10,000 M-ohm - 1000 ft.
Verify Diameter & Resistance
Richard J. DiLorenzo
Director - Quality Assurance
Page 1 of 1
January 25, 2024
Plan # 2024-04
Revision 0
THE OKONITE COMPANY
Ramsey, New Jersey 07446
r.dilorenzo@okonite.com
Test Plan For
Wholesale Electric / WEA Singapore Sales
Factory Order: 188-6093, PO# 2300572
This sample Test Plan describes the basic inspection/quality requirements for the Okonite cables described in the
above order.
Applicable Industry Standards:
UL 1309 - Marine Shipboard Cable (E137931)
UL 1569 - Metal Clad Cable (E38916)
Construction:
Item 4: 3/C, #12 7X Copper, 030 X-Olene XLP, METH 1 (UL) CC, Cabled, W/3 X #16 7X Copper GRD Wires, Fill,
Tape, Aluminum CLX, 050 Okoseal PVC, Seq Print, 600V Product Code: 546-31-3453
Item 5: 3/C, #4 Class B Copper C-RD, 045 X-Olene XLP, METH 3 CC, Cabled, W/3 #12 7X Copper GRD Wires, Fill,
Tape, Aluminum CLX, 050 Okoseal PVC, Seq Print, 600V Product Code: 571-31-3200
Item 7: 3/C, 4/0 Class B Copper C-RD, 055 X-Olene XLP, METH 3-UL CC, Cabled, W/1 #4 Class B Copper GRD
Wire, Fill, Tape, 080 LT/FR Okoseal PVC, Seq Print, 600V Product Code: 112-31-3785
Item 8: 1/PR, 16 7X Copper, 030 X-Olene XLP, BLK/WHT, Twisted, 16 65X Tinned Copper Drain Wire, ALUM/MYLAR
Tape, 045 FR Okoseal PVC, Seq Print, 600V
Product Code: 267-40-3401
In Process Tests
Requirements
Item 4
Item 5
Item 7
Item 8
Insulation Thickness (mils)
30 min avg
27 min point
45 min avg
41 min point
55 min avg
50 min point
30 min avg
27 min point
Jacket Thickness (mils)
50 min avg
35 min point
50 min avg
35 min point
80 min avg
75 min point
45 min avg
min point
AC Spark Test - No Sparkouts
10 KV
12.5 KV
15.0 KV
10 KV
AC Tank Test (1 minute)
6.0 KV
7.5 KV
9.0 KV
6.0 KV
Item 4
Item 5
Item 7
Item 8
6.0 KV
7.5 KV
9.0 KV
6.0 KV
10,000 M-ohm 1000 ft.
10,000 M-ohm 1000 ft.
10,000 M-ohm 1000 ft.
10,000 M-ohm 1000 ft.
1.68
0.2637
0.0520
4.26
Final Electrical Testing
AC Withstand (1 minutes)
IR Constant at 15.6C
Conductor Resistance (max)
Ohms-1000' at 25C
Richard J. DiLorenzo
Director - Quality Assurance
Page 1 of 1
January 25, 2024
Plan # 2024-05
Revision 0
THE OKONITE COMPANY
Ramsey, New Jersey 07446
r.dilorenzo@okonite.com
Test Plan For
Wholesale Electric / WEA Singapore Sales
Factory Order: 188-6094, PO# 2300572
This sample Test Plan describes the basic inspection/quality requirements for the Okonite cable
described below.
Applicable Industry Standards:
UL 1569 - Metal Clad Cable (E38916)
Construction:
2/PR, 16 7X Copper, 030 X-Olene XLP, BLK/WHT #D, Twisted, 18 41X
Tinned Copper Drain Wire, ALUM/MYLAR ISO - Tape, Cabled, Tape, 16 65X
Tinned Copper Drain Wire, ALUM/MYLAR Tape, 060 FR Okoseal PVC, Seq
Print, 600V
Product Code:
268-40-3402
In Process Tests/Requirements
Insulation:
Min average 30 mils
Min point 27 mils
Insulation Spark Test:
10.0 KV
Pass
Jacket Thickness:
Min average 060 mils
Min point 48 mils
Jacket Spark Test:
5.5KV
No Sparkouts
Final Testing
Conductor Resistance:
AC Withstand:
IR Constant, min., 15.6C
Grounding Conductor
4.26 Maximum Ohms per 1000' @ 25C
6.0 KV for 1 minute
10,000 M-ohm - 1000 ft.
Verify Diameter & Resistance
Richard J. DiLorenzo
Director - Quality Assurance
Page 1 of 1
January 25, 2024
Plan # 2024-06
Revision 0
THE OKONITE COMPANY
Ramsey, New Jersey 07446
r.dilorenzo@okonite.com
Test Plan For
Wholesale Electric / WEA Singapore Sales
Factory Order: 189-9119, PO# 2300572
This sample Test Plan describes the basic inspection/quality requirements for the Okonite cables described in the
above order.
Construction:
Item 2: 3/C, 10 7X Copper, 030 X-Olene XLP, METH 1-UL E-2), Cabled, W/3 #14 7X Copper GRD Wires, Fill, Tape,
Aluminum CLX, 050 LT/FR Okoseal PVC, Seq Print, 600V Product Code: 546-31-3503
Item 3: 3/C, #6 Class B Copper C-RD, 045 X-Olene XLP, METH 3-UL E-2 CC, Cabled, W/3 #12 7X Copper GRD
Wires, Fill, Tape, Aluminum CLX, 050 LT/FR Okoseal PVC, Seq Print, 600V Product Code: 571-31-3191
Item 5: 3/C, #2 Class B Copper C-RD, 045 X-Olene XLP, METH 3-UL E-2 CC, Cabled, W/3 #10 7X Copper GRD
Wire, Fill, Tape, Aluminum CLX, 050 LT/FR Okoseal PVC, Seq Print, 600V Product Code: 571-31-3204
Item 6: 3/C, 2/0 Class B Copper C-RD, 055 X-Olene XLP, METH 3-UL E-2 CC, Cabled, W/3 #10 7X Copper GRD
Wire, Fill, Tape, Aluminum CLX, 050 LT/FR Okoseal PVC, Seq Print, 600V Product Code: 571-31-3216
Item 7: 3/C, 4/0 Class B Copper C-RD, 055 X-Olene XLP, METH 3 (UL) CC, Cabled, W/3 #8 Class B Copper C-RD
GRD Wire, Fill, Tape, Aluminum CLX, 060 LT/FR Okoseal PVC, Seq Print, 600V Product Code: 571-31-3224
Item 9: 1/PR 16 7X Copper, 030 X-Olene XLP, BLK/WHT, Twisted, 16 65X Tinned Copper Drain Wire, ALUM/MYLAR
Tape, 045 FR Okoseal PVC, Seq Print, 600V Product Code: 267-40-3401
In Process Tests
Requirements
Item 2
Item 3
Item 5
Item 6
Item 7
Item 9
Insulation Thickness
(mils)
30 min avg
27 min point
45 min avg
41 min point
45 min avg
41 min point
55 min avg
50 min point
55 min avg
50 min point
30 min avg
27 min point
Jacket Thickness
(mils)
50 min avg
35 min point
50 min avg
35 min point
50 min avg
35 min point
50 min avg
35 min point
60 min avg
48 min point
50 min avg
48 min point
AC Spark Test No Sparkouts
10 KV
12.5 KV
12.5 KV
15.0 KV
15.0 KV
10 KV
AC Tank Test
(1 minute)
6.0 KV
7.5 KV
7.5 KV
9.0 KV
9.0 KV
6.0 KV
Item 2
Item 3
Item 5
Item 6
Item 7
Item 9
AC Withstand
(1 minutes)
6.0 KV
7.5 KV
7.5 KV
9.0 KV
9.0 KV
6.0 KV
IR Constant at 15.6C
M-ohm - 1000 ft.
10,000
10,000
10,000
10,000
10,000
10,000
Conductor Resistance
Ohms-1000' at 25C
1.059
(max)
0.4192
(max)
0.1659
(max)
0.0826
(max)
0.0520
(max)
4.26
(max)
Final Electrical
Testing
Richard J. DiLorenzo
Director - Quality Assurance
Page 1 of 1
January 25, 2024
Plan # 2024-07
Revision 0
THE OKONITE COMPANY
Ramsey, New Jersey 07446
r.dilorenzo@okonite.com
Test Plan For
Wholesale Electric / WEA Singapore Sales
Factory Order: 189-9120, PO# 2300572
This sample Test Plan describes the basic inspection/quality requirements for the Okonite cable
described below.
Applicable Industry Standards:
UL 1569 - Metal Clad Cable (E38916)
Construction:
1/TR, 16 7X Copper, 030 X-Olene XLP, BLK/WHT/RED, Twisted, 16 65X
Tinned Copper Drain Wire, ALUM/MYLAR Tape, 045 FR Okoseal PVC, Seq
Print, 600V
Product Code:
267-41-3401
In Process Tests/Requirements
Insulation:
Min average 30 mils
Min point 27 mils
Insulation Spark Test:
10.0 KV
Pass
Jacket Thickness:
Min average 45 mils
Min point 40 mils
Jacket Spark Test:
4.5KV
No Sparkouts
Final Testing
Conductor Resistance:
AC Withstand:
IR Constant, min., 15.6C
Grounding Conductor
4.26 Maximum Ohms per 1000' @ 25C
6.0 KV for 1 minute
10,000 M-ohm - 1000 ft.
Verify Diameter & Resistance
Richard J. DiLorenzo
Director - Quality Assurance
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-EE-0-000027 – REV A
Installation, Operating & Maintenance Manual Electrical & Instrument Cable - WEA
V-VME-STP-OP-0-00052
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
Pikka Development Project
Installation, Operating & Maintenance Manual - Electrical & Instrument
Cable - WEA
Document number – V-VME-STP-OP-0-00052
Rev A
10/13/2023 – Issued for Review
PIKKA DEVELOPMENT PROJECT
INSTALLATION, OPERATING & MAINTENANCE MANUAL - ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-OP-0-00052 – REV A
CONTRACTOR DOC NO.: 200177-VME-OP-MN-035000
SUB-CONTRACTOR DOC NO.:
DOCUMENT CONTROL
The controlled copy of this document can be accessed from the Electronic Santos Alaska Project Document
Management System – Aconex. Printed copies are not controlled.
REVISION HISTORY
REV
Date
A
13/10/23
Issued for Review
Originator
Checked
Approved
J. EBORA
J.WONG
V.TOH
Click here
to enter a
Click here
to enter a
Click here
to enter a
CHANGE LOG
REV
CHANGE
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
Methods for Determining
Conduit Sizes
Procedures
Procedures
BACK-FILL
24”
MINIMUM
6” TO 8”
PRELIMINARY
COVERING
OF SAND
OR STONE FREE
EARTH
3” TO 4”
SOFT BEDDING
OF SAND
OR STONE
FREE EARTH
Procedures
Procedures
Procedures
Procedures
INSTALLATION
PRACTICES
FOR CABLE
RACEWAY
SYSTEMS
ISO 9001-2015
CERTIFIED
THE
OKONITE
COMPANY
Ramsey, New Jersey 07446
www.okonite.com
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
INSTALLATION PRACTICES
FOR CABLE RACEWAY SYSTEMS
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-EE-0-000027 – REV A
Preservation, Packing and Storage Procedure Electrical & Instrument Cable - WEA
V-VME-STP-QA-0-000311
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
Pikka Development Project
Preservation, Packing and Storage Procedure - Electrical &
Instrument Cable - WEA
Document number – V-VME-STP-QA-0-000311
Rev 1
01/12/2024 – Re-Issued for Construction
PIKKA DEVELOPMENT PROJECT
PRESERVATION, PACKING AND STORAGE PROCEDURE - ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-QA-0-000311 - Rev 1
CONTRACTOR DOC NO.:
SUB-CONTRACTOR DOC NO.:
DOCUMENT CONTROL
The controlled copy of this document can be accessed from the Electronic Santos Alaska Project Document
Management System – Aconex. Printed copies are not controlled.
REVISION HISTORY
REV
Date
Originator
Checked
Approved
A
13/10/23
Issued for Review
J. EBORA
J.WONG
V.TOH
0
7/12/23
Issued for Construction
J. EBORA
V. TOH
V.TOH
1
12/01/24
Re-Issued for Construction
J. EBORA
V. TOH
V.TOH
Click here
to enter a
Click here
to enter a
CHANGE LOG
REV
CHANGE
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
SUBJECT: INSPECTION OF REELS AFTER PROLONGED OUTDOOR STORAGE
NOTE NO: 17- 08
SECTION: 12
DATE: JULY 19, 2017
Inspection Of Reels After Prolonged Outdoor Storage
Reels and their associated packaging are standardized in NEMA WC 26/EEMAC 201. Okonite
recommends storing reels inside buildings or warehouses. With continuous outdoor storage of cable reels
weathering and/or deformation of the reels may occur. When cable is to be installed after prolonged
outdoor storage it will be necessary to review each reel for damage prior to installation.
Before moving the reel the installer should:





Check to see if the reel wrap has been punctured, ripped or rubbed.
Confirm that no damage to or deterioration of arbors, hubs or plates has occurred.
Check reels for sturdiness by hand, applying force both forward and backward against the top of
the outside surface of one flange (gently shake the reel).
Replace or tighten any hardware as necessary.
Tighten reel if possible.
If the reel was set on bare ground ensure that it has not sunken into the earth. When reels have sunken into
the ground extra care must be taken when moving them as they may be difficult to lift using normal
methods.
Once a sunken reel has been moved it will be necessary to inspect the cable that was at the bottom of the
reel. Damage to the cable may have occurred due to prolonged periods of rocks, debris, or a rough surface
pressing against the cable. Any obvious deformation or punctures should be documented for further
review.
The inner flange surface should always be inspected before cable installation regardless of storage
conditions. After periods of prolonged outdoor storage additional attention to detail is required.
Any time before installation the inner flange surface must be closely inspected for:








Raised nails - not countersunk.
Raised staples and/or U-Nails.
Nails in board cracks - not clinched into wood.
Large gaps between boards that could damage product.
Large wooden splinters.
Warping and subsequent inward bowing of the flange.
Uneven boards that could rub against the cable during installation.
Any other obvious protrusions that may come in contact with the cable during installation.
Method of inspection is at installer’s discretion, however it may be helpful to run a straight edge along the
inner flange starting at or below the first wrap of cable and moving to the outside of the flange in order to
‘feel’ for any obscured protrusions or hazards not observed through visual inspection.
At the time of installation it will be prudent for the installer to observe cable payoff from the reel to
ensure that no obvious damage is occurring from sources that may have been overlooked during initial
inspection.
J. Fino
OKON ITE C A B LES
802 Century Plaza Drive
Houston TX 77073
281-821-5500
www.okonite.com
Long Term Cable Storage and Reel Handling
Cable reels are designed to stand directly on their flanges. The strength of the reel in
this position is maximum and it will support the gross weight of cable and reel. In
addition, reels can be lifted by cranes or fork lift equipment in an efficient manner.
Reels should not be stored on their sides. This causes damage to the reels as a result
of the side lopping, as well as up-righting, loosening of the cable winding and, in many
cases, cable damage when the fork truck forks are slipped between the cable and the
flange to upright the reel for use. All reels shipped from our facilities are clearly marked
with the admonition “DO NOT LAY FLAT”.
On receipt, cable protective covering should be inspected for evidence of damage during
transit. When transit damage is suspected, the shipment should either be refused or at
a minimum, a notation of the damage should be noted on the carrier’s if evidence of
damage is found.
Unloading should be accomplished so that equipment used does not contact the cable
surface, and in the case of protective wrap, that the equipment does not contact the
protective wrap. If unloading is accomplished by crane, either a cradle supporting the
reel flanges or a shaft through the arbor hole, along with a spreader bar should be used.
If a fork lift is utilized, the forks must lift the reel at 90 degrees to the flanges and must be
long enough to make complete lifting contact with both flanges. Under no circumstances
should the forks contact the cable surface or protective wraps.
If an inclined ramp is used for unloading, the ramp must be wide enough for full contact
by both flanges and stopping of the reels at the bottom of the ramp shall be
accomplished without contact to the surface of the cable or its protective reel wrap.
Under no circumstances should reels be dropped from the delivering vehicle to the
ground.
Reels should be stored on a hard surface so that flanges do not sink into the earth and
allow the weight of the reel and cable to rest on the cable surface. Keep in mind that
the life expectancy of a wooden reel that is stored outside in the Gulf Coast is only about
12 months. If you are required to store the cable reels for longer periods of time than
this, we recommend using additional protection like tarps to protect the reels from direct
exposure to rain.
Reels should not be stored in an area where construction equipment, falling or flying
objects, or other materials will contact the cable.
1
OKON ITE C A B LES
When a reel of cable is rolled from one point to another, care must be taken to see that
there are no objects on the surface area which could contact or damage the cable
surface or protective wrap. This is the reason for the designed rolling clearance.
Cable should be stored in an area away from open fires or sources of high heat.
An awareness of these handling characteristics will prevent damage and eliminate
unexpected situations.
2
PIKKA DEVELOPMENT PROJECT
MANUFACTURING RECORD BOOK (MRB) – ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-EE-0-000027 – REV A
Packing and Shipping Schedule/List - Electrical &
Instrument Cable - WEA
V-VME-STP-QA-0-000319
V-VME-STP-EE-0-000027 _REVA – 26-04-2024
Pikka Development Project
Packing and Shipping Schedule/List - Electrical & Instrument Cable - WEA
Document number – V-VME-STP-QA-0-000319
Rev B
01/12/2024 – Issued for Approval
PIKKA DEVELOPMENT PROJECT
PACKING AND SHIPPING SCHEDULE/LIST - ELECTRICAL & INSTRUMENT CABLE - WEA
V-VME-STP-QA-0-000319 – REV B
CONTRACTOR DOC NO.: 200177-VME-QA-SP-035004
SUB-CONTRACTOR DOC NO.:
DOCUMENT CONTROL
The controlled copy of this document can be accessed from the Electronic Santos Alaska Project Document
Management System – Aconex. Printed copies are not controlled.
REVISION HISTORY
REV
Date
A
7/12/23
B
12/01/24
Originator
Checked
Approved
Issued for Review
J. EBORA
C. TUNG
V.TOH
Issued for Approval
J. EBORA
C. TUNG
V.TOH
Click here
to enter a
Click here
to enter a
Click here
to enter a
CHANGE LOG
REV
CHANGE
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
Click here to enter a date.
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
THE OKONITE COMPANY
14944 S. W. Century Dr.
Sherwood OR 97140
PACKING
LIST#
185-28299A
PROUDLY MADE IN THE USA
PH: 281-821-5500
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
PT. VME PROCESS
Jalan Tamalatea TJ.Sengkuang Kepulauan Riau
Register#
54-5635
Batu Ampar
F/O#
185-6885-1
Kota Batam 29444
Commodity Code: 8544.49.3040
VME PO#
ID - INDONESIA
WEAS PO# 2300572
AP200177-1-0068
Item#
DIMENSIONS (INCHES)
Shipping
Weight
(Pounds)
# of
Reels
Qty
(feet)
PRODUCT CODE
SHIPPING WEIGHT
(KG)
REEL DIMENSIONS (CM)
L
x
W
x
H
Commodity / MTO
HS Code:
ITEM #
1
44
x
28.5
x
44
8544.49.3040
002-B Module
782
1
3,021
546-31-3942
ECD-LV-MC-HL-2C+GX12AWG-002
920.80
355
271
111.76
x
72.39
x
111.76
0.9042
2
49
x
32.5
x
49
8544.49.3040
002-B Module
882
1
3,100
546-31-3942
ECD-LV-MC-HL-2C+GX12AWG-001
944.88
400
278
124.46
x
82.55
x
124.46
1.2787
Total Weight (Pounds):
Total # Reels:
Categary
1,664
6,121
2
Customer Drum#
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
Total Weight (kg)
755
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
PH: 281-821-5500
THE OKONITE COMPANY
100 Alpha Drive
Building B
Destrehan LA 70047
188-74553A
PROUDLY MADE IN THE USA
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
Crane Worldwide Warehouse
51 Tuas View Link Warehouse 2
Register#
54-5482
Singapore, 01 637473
F/O#
188-6093
PIC : Chung Boon / Sean
Commodity Code: 8544.49.3040
VME PO#
Tel: +65 9383 6180 / +65 8338 5277
WEAS PO# 2300572
AP200177-1-0068
Item#
PACKING
LIST#
DIMENSIONS (INCHES)
Categary
Shipping
Weight
(Pounds)
L
x
W
x
H
1
44
x
28.5
x
44
8544.49.3040
6
Integration
830
1
2,587
546-31-3453
INTEGRATION KOREA ECD-LV-MCHL 3C+GX12AWG-002
788.52
376
262
111.76
x
72.39
x
111.76
0.9042
2
34
x
22.5
x
34
8544.49.3040
6
Integration
193
1
320
546-31-3453
INTEGRATION KOREA ECD-LV-MCHL 3C+GX12AWG-001
97.54
88
32
86.36
x
57.15
x
86.36
0.4262
571-31-3200
INTEGRATION KOREA ECD-LV-MCHL 3C+GX4AWG-001
146.91
254
153
111.76
x
72.39
x
111.76
0.9042
44
x
28.5
x
44
Total Weight (Pounds):
Total # Reels:
8544.49.3040
11
Integration
559
1,582
Qty
(feet)
PRODUCT CODE
REEL DIMENSIONS (CM)
Commodity / MTO
HS Code
ITEM #
3
# of
Reels
SHIPPING WEIGHT
(KG)
1
482
3,389
3
Customer Drum#
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
Total Weight (kg)
718
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
PH: 281-821-5500
THE OKONITE COMPANY
100 Alpha Drive
Building B
Destrehan LA 70047
188-74554A
PROUDLY MADE IN THE USA
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
PT. VME PROCESS
Jalan Tamalatea TJ.Sengkuang Kepulauan Riau
Register#
54-5482
Batu Ampar
F/O#
188-6093-8
Kota Batam 29444
Commodity Code: 8544.49.3040
VME PO#
ID - INDONESIA
WEAS PO# 2300572
AP200177-1-0068
Item#
PACKING
LIST#
DIMENSIONS (INCHES)
Categary
Shipping
Weight
(Pounds)
L
x
W
x
H
1
34
x
22.5
x
34
8544.49.3040
1
Instrument
407
1
3,862
267-40-3401
INSTRUMENT BATAM ICD-LV-TC-ER
1PRX16 AWG-005
1177.14
185
130
86.36
x
57.15
x
86.36
0.4262
2
34
x
22.5
x
34
8544.49.3040
1
Instrument
360
1
3,260
267-40-3401
INSTRUMENT BATAM ICD-LV-TC-ER
1PRX16 AWG-007
993.65
163
109
86.36
x
57.15
x
86.36
0.4262
267-40-3401
INSTRUMENT BATAM ICD-LV-TC-ER
1PRX16 AWG-003
2011.68
299
222
101.6
x
58.42
x
101.60
0.6030
40
x
23
x
40
Total Weight (Pounds):
Total # Reels:
8544.49.3040
1
Instrument
659
1,426
Qty
(feet)
PRODUCT CODE
REEL DIMENSIONS (CM)
Commodity / MTO
HS Code
ITEM #
3
# of
Reels
SHIPPING WEIGHT
(KG)
1
6,600
13,722
3
Customer Drum#
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
Total Weight (kg)
647
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
PH: 281-821-5500
THE OKONITE COMPANY
100 Alpha Drive
Building B
Destrehan LA 70047
PT. VME PROCESS
Jalan Tamalatea TJ.Sengkuang Kepulauan Riau
Register#
54-5482
Batu Ampar
F/O#
188-6093-2
Kota Batam 29444
Commodity Code: 8544.49.3040
VME PO#
ID - INDONESIA
WEAS PO# 2300572
AP200177-1-0068
1
188-74554B
PROUDLY MADE IN THE USA
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
Item#
PACKING
LIST#
DIMENSIONS (INCHES)
L
x
W
x
H
Commodity / MTO
HS Code
ITEM #
70
x
44
x
70
8544.49.3040
Total Weight (Pounds):
Total # Reels:
10
Categary
Shipping
Weight
(Pounds)
E House
7,150
7,150
# of
Reels
Qty
(feet)
PRODUCT CODE
1
2,513
112-31-3785
2,513
1
Customer Drum#
E-HOUSE BATAM ECD-LV-TC-ER
3C+GX4/0AWG-001
Total Weight (kg)
SHIPPING WEIGHT
(KG)
REEL DIMENSIONS (CM)
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
765.96
3,243
2,844
177.8
x
111.76
x
177.80
3.5331
3,243
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
PH: 281-821-5500
THE OKONITE COMPANY
100 Alpha Drive
Building B
Destrehan LA 70047
PT. VME PROCESS
Jalan Tamalatea TJ.Sengkuang Kepulauan Riau
Register#
54-5482
Batu Ampar
F/O#
188-6094-1
Kota Batam 29444
Commodity Code: 8544.49.3040
VME PO#
ID - INDONESIA
WEAS PO# 2300572
AP200177-1-0068
1
188-74555A
PROUDLY MADE IN THE USA
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
Item#
PACKING
LIST#
DIMENSIONS (INCHES)
L
x
W
x
H
Commodity / MTO
HS Code
ITEM #
34
x
22.5
x
34
8544.49.3040 007-A Instrument
Total Weight (Pounds):
Total # Reels:
Categary
Shipping
Weight
(Pounds)
# of
Reels
Qty
(feet)
PRODUCT CODE
230
1
780
268-40-3402
230
780
1
SHIPPING WEIGHT
(KG)
REEL DIMENSIONS (CM)
Customer Drum#
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
INSTRUMENT BATAM ICD-LV-TC-ER
2PRX16 AWG-003
237.74
104
71
86.36
x
57.15
x
86.36
0.4262
Total Weight (kg)
104
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
PH: 281-821-5500
THE OKONITE COMPANY
100 Alpha Drive
Building B
Destrehan LA 70047
PT. VME PROCESS
Jalan Tamalatea TJ.Sengkuang Kepulauan Riau
Register#
54-5482
Batu Ampar
F/O#
188-6093-1
Kota Batam 29444
Commodity Code: 8544.49.3040
VME PO#
ID - INDONESIA
WEAS PO# 2300572
AP200177-1-0068
1
188-74791A
PROUDLY MADE IN THE USA
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
Item#
PACKING
LIST#
DIMENSIONS (INCHES)
L
x
W
x
H
Commodity / MTO
HS Code: ITEM # Categary
48
x
69
x
75
8544.49.3040
Total Weight (Pounds):
Total # Reels:
4
E House
Shipping
Weight
(Pounds)
# of
Reels
Qty
(feet)
PRODUCT CODE
3,700
1
480
571-31-3244
3,700
480
1
SHIPPING WEIGHT
(KG)
REEL DIMENSIONS (CM)
Customer Drum#
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
E-HOUSE BATAM ECD-LV-MC-HL3C+GX500AWG-001
146.30
1,678
1,291
121.92
x
175.26
x
121.92
2.6051
Total Weight (kg)
1,678
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
PH: 281-821-5500
THE OKONITE COMPANY
100 Alpha Drive
Building B
Destrehan LA 70047
PT. VME PROCESS
Jalan Tamalatea TJ.Sengkuang Kepulauan Riau
Register#
54-5482
Batu Ampar
F/O#
188-6161-1
Kota Batam 29444
Commodity Code: 8544.49.3040
VME PO#
ID - INDONESIA
WEAS PO# 2300572
AP200177-1-0068
1
188-74645A
PROUDLY MADE IN THE USA
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
Item#
PACKING
LIST#
DIMENSIONS (INCHES)
L
x
W
x
H
Commodity / MTO
HS Code
ITEM #
34
x
22.5
x
34
8544.49.3040
Total Weight (Pounds):
Total # Reels:
3
Categary
E House
Shipping
Weight
(Pounds)
# of
Reels
Qty
(feet)
PRODUCT CODE
210
1
240
571-31-3190
210
240
1
Customer Drum#
E-HOUSE BATAM ECD-LV-MC-HL
3C+GX8AWG-002
Total Weight (kg)
SHIPPING WEIGHT
(KG)
REEL DIMENSIONS (CM)
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
73.15
95
42
86.36
x
57.15
x
86.36
0.4262
95
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
THE OKONITE COMPANY
802 Century Plaza Drive
Houston TX 77073
PACKING
LIST#
189-98790A
PROUDLY MADE IN THE USA
PH: 281-821-5500
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
Crane Worldwide Warehouse
51 Tuas View Link Warehouse 2
Register#
54-5482
Singapore, 01 637473
F/O#
189-9119
PIC : Chung Boon / Sean
Commodity Code: 8544.49.3040
VME PO#
Tel: +65 9383 6180 / +65 8338 5277
WEAS PO# 2300572
AP200177-1-0068
Item#
DIMENSIONS (INCHES)
Categary
Shipping
Weight
(Pounds)
L
x
W
x
H
1
34
x
22.5
x
34
8544.49.3040
13
Integration
282
1
777
546-31-3503
INTEGRATION KOREA ECD-LV-MCHL 3C+GX10AWG-001
236.83
128
102
86.36
x
57.15
x
86.36
0.4262
2
58
x
37
x
58
8544.49.3040
14
Integration
2,899
1
5,000
571-31-3191
INTEGRATION KOREA ECD-LV-MCHL 3C+GX6AWG-001
1524.00
1,315
1,193
147.32
x
93.98
x
147.32
2.0397
3
58
x
37
x
58
8544.49.3040
14
Integration
2,892
1
5,000
571-31-3191
INTEGRATION KOREA ECD-LV-MCHL 3C+GX6AWG-002
1524.00
1,312
1,144
147.32
x
93.98
x
147.32
2.0397
571-31-3191
INTEGRATION KOREA ECD-LV-MCHL 3C+GX6AWG-003
555.04
489
427
111.76
x
72.39
x
111.76
0.9042
571-31-3204
INTEGRATION KOREA ECD-LV-MCHL 3C+GX2AWG-001
163.68
292
245
111.76
x
72.39
x
111.76
0.9042
571-31-3216
INTEGRATION KOREA ECD-LV-MCHL 3C+GX2/0AWG-001
968.65
2,791
2,539
193.04
x
113.03
x
193.04
4.2120
571-31-3224
INTEGRATION KOREA ECD-LV-MCHL 3C+GX4/0AWG-001
829.06
3,581
3,349
193.04
x
113.03
x
193.04
4.2120
5
6
7
44
44
76
76
x
x
x
x
28.5
28.5
44.5
44.5
x
x
x
x
44
44
76
76
Total Weight (Pounds):
Total # Reels:
8544.49.3040
8544.49.3040
8544.49.3040
8544.49.3040
14
18
19
20
Integration
Integration
Integration
Integration
1,077
643
6,152
7,894
21,839
Qty
(feet)
PRODUCT CODE
REEL DIMENSIONS (CM)
Commodity / MTO
HS Code
ITEM #
4
# of
Reels
SHIPPING WEIGHT
(KG)
1
1
1
1
1,821
537
3,178
2,720
19,033
7
Customer Drum#
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
Total Weight (kg)
9,906
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
THE OKONITE COMPANY
802 Century Plaza Drive
Houston TX 77073
PACKING
LIST#
189-98791A
PROUDLY MADE IN THE USA
PH: 281-821-5500
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
PT. VME PROCESS
Jalan Tamalatea TJ.Sengkuang Kepulauan Riau
Register#
54-5482
Batu Ampar
F/O#
189-9119-9
Kota Batam 29444
Commodity Code: 8544.49.3040
VME PO#
ID - INDONESIA
WEAS PO# 2300572
AP200177-1-0068
Item#
DIMENSIONS (INCHES)
Categary
Shipping
Weight
(Pounds)
L
x
W
x
H
1
40
x
23
x
40
8544.49.3040
1
Instrument
580
1
6,524
267-40-3401
INSTRUMENT BATAM ICD-LV-TC-ER
1PRX16 AWG-009
1988.52
263
219
101.6
x
58.42
x
101.60
0.6030
2
34
x
22.5
x
34
8544.49.3040
1
Instrument
310
1
3,440
267-40-3401
INSTRUMENT BATAM ICD-LV-TC-ER
1PRX16 AWG-006
1048.51
141
115
86.36
x
57.15
x
86.36
0.4262
Total # Reels:
890
Qty
(feet)
PRODUCT CODE
REEL DIMENSIONS (CM)
Commodity / MTO
HS Code:
ITEM #
Total Weight (Pounds):
# of
Reels
SHIPPING WEIGHT
(KG)
9,964
2
Customer Drum#
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
Total Weight (kg)
404
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
THE OKONITE COMPANY
802 Century Plaza Drive
Houston TX 77073
PACKING
LIST#
189-98793A
PROUDLY MADE IN THE USA
PH: 281-821-5500
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
PT. VME PROCESS
Jalan Tamalatea TJ.Sengkuang Kepulauan Riau
Register#
54-5482
Batu Ampar
F/O#
189-9120-1
Kota Batam 29444
Commodity Code: 8544.49.3040
VME PO#
ID - INDONESIA
WEAS PO# 2300572
AP200177-1-0068
Item#
DIMENSIONS (INCHES)
L
x
W
x
H
Commodity / MTO
HS Code:
ITEM #
1
28
x
15
x
28
8544.49.3040
2
28
x
15
x
28
8544.49.3040
Total Weight (Pounds):
Total # Reels:
Categary
008-A Instrument
3
Instrument
Shipping
Weight
(Pounds)
# of
Reels
Qty
(feet)
PRODUCT CODE
77
1
480
52
1
180
129
660
2
SHIPPING WEIGHT
(KG)
REEL DIMENSIONS (CM)
Customer Drum#
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
267-41-3401
INSTRUMENT BATAM ICD-LV-TC-ER
1TRX16 AWG-001
146.30
35
19
71.12
x
38.10
x
71.12
0.1927
267-41-3401
INSTRUMENT BATAM ICD-LV-TC-ER
1TRX16 AWG-002
54.86
24
7
71.12
x
38.10
x
71.12
0.1927
Total Weight (kg)
59
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
THE OKONITE COMPANY
802 Century Plaza Drive
Houston TX 77073
PACKING
LIST#
189-98971A
PROUDLY MADE IN THE USA
PH: 281-821-5500
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
PT. VME PROCESS
Jalan Tamalatea TJ.Sengkuang Kepulauan Riau
Register#
54-5482
Batu Ampar
F/O#
189-9135-1
Kota Batam 29444
Commodity Code: 8544.60.4000
VME PO#
ID - INDONESIA
WEAS PO# PO2300572
AP200177-1-0068
Item#
1
DIMENSIONS (INCHES)
L
x
W
x
H
Commodity / MTO
HS Code: ITEM # Categary
69
x
41
x
69
8544.60.4000
Total Weight (Pounds):
Total # Reels:
2
E House
Shipping
Weight
(Pounds)
# of
Reels
Qty
(feet)
PRODUCT CODE
2,520
1
367
571-22-3838
2,520
367
1
SHIPPING WEIGHT
(KG)
REEL DIMENSIONS (CM)
Customer Drum#
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
E-HOUSE BATAM ECD-MV-MC-HL3C+GX350AWG-001
111.86
1,143
885
175.26
x
104.14
x
175.26
3.1988
Total Weight (kg)
1,143
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
THE OKONITE COMPANY
2900 South Skyway Drive
Santa Maria CA 93455
PACKING
LIST#
5-24193A
PROUDLY MADE IN THE USA
PH: 281-821-5500
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
Crane Worldwide Warehouse
51 Tuas View Link Warehouse 2
Register#
54-5482
Singapore, 01 637473
F/O#
015-6110-3
PIC : Chung Boon / Sean
Commodity Code: 8544.49.3040
VME PO#
Tel: +65 9383 6180 / +65 8338 5277
WEAS PO# 2300572
AP200177-1-0068
Item#
DIMENSIONS (INCHES)
Categary
Shipping
Weight
(Pounds)
L
x
W
x
H
1
82
x
45.5
x
82
8544.49.3040
27
Integration
10,160
1
2,303
112-31-3793
INTEGRATION KOREA ECD-LV-TCER 3C+GX350AWG-002
701.95
4,609
4,290
208.28
x
115.57
x
208.28
5.0135
2
82
x
45.5
x
82
8544.49.3040
27
Integration
10,190
1
2,302
112-31-3793
INTEGRATION KOREA ECD-LV-TCER 3C+GX350AWG-003
701.65
4,622
4,288
208.28
x
115.57
x
208.28
5.0135
Total # Reels:
20,350
Qty
(feet)
PRODUCT CODE
REEL DIMENSIONS (CM)
Commodity / MTO
HS Code
ITEM #
Total Weight (Pounds):
# of
Reels
SHIPPING WEIGHT
(KG)
4,605
2
Customer Drum#
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
Total Weight (kg)
9,231
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
THE OKONITE COMPANY
2900 South Skyway Drive
Santa Maria CA 93455
PACKING
LIST#
5-24281A
PROUDLY MADE IN THE USA
PH: 281-821-5500
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
PT. VME PROCESS
Jalan Tamalatea TJ.Sengkuang Kepulauan Riau
Register#
54-5482
Batu Ampar
F/O#
015-6111-1
Kota Batam 29444
Commodity Code: 8544.49.3040
VME PO#
ID - INDONESIA
WEAS PO# 2300572
AP200177-1-0068
Item#
1
DIMENSIONS (INCHES)
L
x
W
x
H
Commodity / MTO
HS Code
ITEM #
49
x
33
x
49
8544.49.3040
Total Weight (Pounds):
Total # Reels:
11
Categary
Shipping
Weight
(Pounds)
E House
1,920
1,920
# of
Reels
Qty
(feet)
PRODUCT CODE
1
384
112-31-3793
384
1
Customer Drum#
E-HOUSE BATAM ECD-LV-TC-ER
3C+GX350AWG-001
Total Weight (kg)
SHIPPING WEIGHT
(KG)
REEL DIMENSIONS (CM)
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
117.04
871
715
124.46
x
83.82
x
124.46
1.2984
871
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
PH: 281-821-5500
THE OKONITE COMPANY
100 Alpha Drive
Building B
Destrehan LA 70047
Crane Worldwide Warehouse
51 Tuas View Link Warehouse 2
Register#
54-5709
Singapore, 01 637473
F/O#
188-6200-1
PIC : Chung Boon / Sean
Commodity Code: 8544.49.3040
VME PO#
Tel: +65 9383 6180 / +65 8338 5277
WEAS PO# PO2300803
AP170112-01-0117 Rev00
1
188-74707A
PROUDLY MADE IN THE USA
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
Item#
PACKING
LIST#
DIMENSIONS (INCHES)
L
x
W
x
H
Commodity / MTO
HS Code ITEM #
80
x
44.5
x
80
8544.49.3040
Total Weight (Pounds):
Total # Reels:
25
Categary
Shipping
Weight
(Pounds)
Integration
8,488
8,488
# of
Reels
Qty
(feet)
PRODUCT CODE
1
4,808
112-10-3904
4,808
1
SHIPPING WEIGHT
(KG)
REEL DIMENSIONS (CM)
Customer Drum#
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
INTEGRATION KOREA ECD-LV-MCHL 3C+GX2/0AWG-001
1465.48
3,850
3,769
203.2
x
113.03
x
203.20
4.6670
Total Weight (kg)
3,850
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
PH: 281-821-5500
THE OKONITE COMPANY
5 Industrial Rd.
Cumberland RI 02864
PT. VME PROCESS
Jalan Tamalatea TJ.Sengkuang Kepulauan Riau
Register#
54-5482
Batu Ampar
F/O#
016-0560-1
Kota Batam 29444
Commodity Code: 8544.49.3040
VME PO#
ID - INDONESIA
WEAS PO# 2300572
AP200177-1-0068
1
6-99427A
PROUDLY MADE IN THE USA
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
Item#
PACKING
LIST#
DIMENSIONS (INCHES)
L
x
W
x
H
Commodity / MTO
HS Code ITEM #
44
x
28.5
x
44
8544.49.3040
Total Weight (Pounds):
Total # Reels:
1
Categary
Shipping
Weight
(Pounds)
Instrument
848
848
# of
Reels
Qty
(feet)
PRODUCT CODE
1
9,600
267-40-3401
9,600
1
SHIPPING WEIGHT
(KG)
REEL DIMENSIONS (CM)
Customer Drum#
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
INSTRUMENT BATAM ICD-LV-TC-ER
1PRX16 AWG-008
2926.08
385
322
111.76
x
72.39
x
111.76
0.9042
Total Weight (kg)
385
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
PH: 281-821-5500
THE OKONITE COMPANY
100 Alpha Drive
Building B
Destrehan LA 70047
PT. VME PROCESS
Jalan Tamalatea TJ.Sengkuang Kepulauan Riau
Register#
54-5666
Batu Ampar
F/O#
188-6197
Kota Batam 29444
Commodity Code: 8544.49.3040
VME PO#
ID - INDONESIA
WEAS PO# PO2300804
AP170112-01-0117 REV 00
1
188-74709A
PROUDLY MADE IN THE USA
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
Item#
PACKING
LIST#
DIMENSIONS (INCHES)
L
x
W
x
H
Commodity / MTO
HS Code
ITEM # Categary
48
x
48
x
45
8544.49.3040
Total Weight (Pounds):
Total # Reels:
8
Control
Shipping
Weight
(Pounds)
# of
Reels
Qty
(feet)
PRODUCT CODE
1,190
1
6,385
202-10-3204
1,190
6,385
1
Customer Drum#
CONTROL ECD-LV-TC-ER-4CX14
AWG-001
Total Weight (kg)
SHIPPING WEIGHT
(KG)
REEL DIMENSIONS (CM)
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
1946.15
540
348
121.92
x
121.92
x
121.92
1.8123
540
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
PH: 281-821-5500
THE OKONITE COMPANY
802 Century Plaza Drive
Houston TX 77073
189-98915A
PROUDLY MADE IN THE USA
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
PT. VME PROCESS
Jalan Tamalatea TJ.Sengkuang Kepulauan Riau
Register#
54-5666
Batu Ampar
F/O#
189-9240
Kota Batam 29444
Commodity Code: 8544.49.3040
VME PO#
ID - INDONESIA
WEAS PO# PO2300804
AP170112-01-0117 REV 00
Item#
PACKING
LIST#
DIMENSIONS (INCHES)
Shipping
Weight
(Pounds)
# of
Reels
Qty
(feet)
PRODUCT CODE
SHIPPING WEIGHT
(KG)
REEL DIMENSIONS (CM)
L
x
W
x
H
Commodity / MTO
HS Code ITEM # Categary
1
34
x
22.5
x
45
8544.49.3040
4
Control
467
1
670
202-10-3219
CONTROL ECD-LV-TC-ER19C+GX14 AWG-001
204.22
212
150
86.36
x
57.15
x
86.36
0.4262
2
48
x
42
x
48
8544.49.3040
5
Control
680
1
745
546-31-3508
CONTROL ECD-LV-MC-HL-8C+GX10
AWG-001
227.08
308
188
121.92
x
106.68
x
121.92
1.5857
640.08
246
178
86.36
x
57.15
x
86.36
0.4262
774.19
295
215
91.44
x
91.44
x
91.44
0.7646
103.63
84
25
91.44
x
91.44
x
91.44
0.7646
3
34
x
22.5
x
34
8544.49.3040
7
Control
543
1
2,100
202-10-3207
4
36
x
36
x
38
8544.49.3040
7
Control
650
1
2,540
202-10-3207
5
36
x
36
x
32
8544.49.3040
11
Control
185
1
340
202-10-3404
Total Weight (Pounds):
Total # Reels:
2,525
6,395
5
Customer Drum#
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
CONTROL ECD-LV-TC-ER-7CX14
AWG-001
CONTROL ECD-LV-TC-ER-7CX14
AWG-002
CONTROL ECD-LV-TC-ER-4CX12
AWG-001
Total Weight (kg)
1,145
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
THE OKONITE COMPANY
802 Century Plaza Drive
Houston TX 77073
PACKING
LIST#
189-98916A
PROUDLY MADE IN THE USA
PH: 281-821-5500
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
PT. VME PROCESS
Jalan Tamalatea TJ.Sengkuang Kepulauan Riau
Register#
Batu Ampar
F/O#
Kota Batam 29444
Commodity Code: 8544.49.3040
VME PO#
ID - INDONESIA
WEAS PO# PO2300802
AP170112-01-0117 Rev00
Item#
DIMENSIONS (INCHES)
54-5708
189-9245-1,2&5
Shipping
Weight
(Pounds)
# of
Reels
Qty
(feet)
PRODUCT CODE
SHIPPING WEIGHT
(KG)
REEL DIMENSIONS (CM)
L
x
W
x
H
Commodity / MTO
HS Code
ITEM # Categary
1
28
x
15.5
x
28
8544.49.3040
5
E House
89
1
392
202-10-3403
E-HOUSE BATAM ECD-LV-TC-ER3CX12 AWG-001
119.48
40
22
71.12
x
39.37
x
71.12
0.1991
2
28
x
15.5
x
28
8544.49.3040
6
E House
117
1
240
112-10-3844
E-HOUSE BATAM ECD-LV-TC-ER3C+GX8AWG-001
73.15
53
38
71.12
x
39.37
x
71.12
0.1991
112-10-3904
E-HOUSE BATAM ECD-LV-TC-ER3C+GX2/0AWG-001
223.11
623
574
111.76
x
72.39
x
111.76
0.9042
3
44
x
28.5
x
44
Total Weight (Pounds):
Total # Reels:
8544.49.3040
9
E House
1,374
1,580
1
732
1,364
3
Customer Drum#
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
Total Weight (kg)
(3 Reels on 2 Pallets)
Pallet 1 : 48x48x32 inches weighing 335 pounds
Pallet 2 : 42x43x48 inches weighing 1525 pounds.
717
634
PACKING LIST
SHIPPING FROM:
THE OKONITE COMPANY
802 Century Plaza Drive
Houston, TX 77073
THE OKONITE COMPANY
802 Century Plaza Drive
Houston TX 77073
PACKING
LIST#
189-98917A
PROUDLY MADE IN THE USA
PH: 281-821-5500
EIN# 22-2279445
ECCN# EAR99
SHIP TO:
Crane Worldwide Warehouse
51 Tuas View Link Warehouse 2
Register#
Singapore, 01 637473
F/O#
PIC : Chung Boon / Sean
Commodity Code: 8544.49.3040
VME PO#
Tel: +65 9383 6180 / +65 8338 5277
WEAS PO# PO2300803
AP170112-01-0117 Rev00
Item#
DIMENSIONS (INCHES)
54-5709
189-9246-1-3
Categary
Shipping
Weight
(Pounds)
# of
Reels
Qty
(feet)
PRODUCT CODE
SHIPPING WEIGHT
(KG)
REEL DIMENSIONS (CM)
L
x
W
x
H
Commodity / MTO
HS Code ITEM #
1
48
x
32
x
48
8544.49.3040
20
112-10-3844
1,665
1
4,147
112-10-3844
INTEGRATION KOREA ECD-LV-TCER-3C+GX8AWG-001
1264.01
755
656
121.92
x
81.28
x
121.92
1.2082
2
48
x
32
x
48
8544.49.3040
22
112-10-3864
1,770
1
2,180
112-10-3864
INTEGRATION KOREA ECD-LV-TCER-3C+GX4AWG-001
664.46
803
672
121.92
x
81.28
x
121.92
1.2082
112-10-3904
INTEGRATION KOREA ECD-LV-TCER-3C+GX2/0AWG-002
1485.60
4,266
3,820
200.66
x
104.14
x
200.66
4.1931
5,824
5,149
3
79
x
41
x
79
8544.49.3040
25
112-10-3904
9,405
1
4,874
Customer Drum#
Quantity
(meters)
GROSS
NET
L
x
W
x
L
CBM
ITEMS 1 & 2 SHOW PALLETED
WT/DIMS.
Total Weight (Pounds):
Total # Reels:
12,840
11,201
3
Total Weight (kg)