1. AGGREGATES
EN 12620 : Aggregates for concrete
EN 13055 : Lightweight aggregates
Part 1 : Lightweight aggregates for concrete and
mortar and grout
Part 2 : Lightweight aggregates for bituminous
mixtures and surface treatments and for bound
and unbound applications.
EN 13139 : Aggregates for mortar
1.1 AGGREGATES TESTING
EN 932 : Tests for general properties of aggregates
Part 1 : Methods for sampling
Part 2 : Methods for reducing laboratory samples
Part 3 : Procedure and terminology for simplified
petrographic description
Part 4 : Common equipment and calibration
Part 5 : Common equipment and calibration
EN 933 : Tests for geometrical properties of
aggregates
Part 1 : Determination of particle size distribution –
Sieving method
Part 2 : Determination of particle size distribution –
Test sieves, nominal size of apertures
Part 3 : Determination of particle shape – Flakiness
index
Part 4 : Determination of particle shape – Shape
index
Part 5 : Determination of percentage of crushed
and broken surfaces in coarse aggregate particles
2. CEMENT
EN 197 : Cement
Part 1 : Composition, specifications, and conformity
criteria for common cements
Part 2 : Conformity evaluation
Part 4 : Composition, specifications, and conformity
criteria for low early strength blastfurnace cements
EN 14216 : Cement - Composition, specifications,
and conformity criteria for very low heat special
cements
EN 14647 : Calcium aluminate cement Composition, specifications, and conformity criteria
2.1 CEMENT TESTING
EN 196: Methods of testing cement
Part 1: Determination of strength
Part 2: Chemical analysis of cement
Part 3: Determination of setting time and
soundness
Part 4: Quantitative determination of
constituents
Part 5: Pozzolanicity test for pozzolanic
cement
Part 6: Determination of fineness
Part 7: Methods of taking and preparing
samples of cement
Part 8: Heat of hydration - Solution Method
Part 9: Heat of hydration - Semi-adiabatic
Method
European
Standards for
Concrete &
Components
3. WATER
EN 1008: Mixing water for concrete
Specifications for sampling, testing, and assessing
the suitability of water, including water recovered
from processes in the concrete industry, as mixing
water for concrete
CONCRETE
EN 206 : Concrete
Specification , performance ,
production and conformity
CONCRETE STRUCTURES
EN 12504: Testing concrete in structures
Part 1: Cored specimens – Taking, examining, and
testing in compression
Part 2: Non-destructive testing – Determination of
rebound number
Part 3: Determination of pull-out force
Part 4: Determination of ultrasonic pulse velocity
EN 13670: Execution of concrete structures
EN 13791: Assessment of concrete compressive strength in
structures and precast concrete components
EN 1504: Products and systems for the protection and
repair of concrete structures
Part 1 to Part 10
4. ADMIXTURES
EN 934: Admixtures for concrete, mortar, and grout
Part 1: Common requirements
Part 2: Concrete admixtures - Definitions,
requirements, conformity, marking, and
labeling
Part 3: Admixtures for masonry mortar Definitions, requirements, and conformity
Part 4: Admixtures for grout for prestressing
tendons - Definitions, requirements, and
conformity
Part 5: Admixtures for sprayed concrete Definitions, specifications, and conformity
criteria
Part 6: Sampling, conformity control, and
evaluation of conformity
EN 480: Admixtures for concrete, mortar, and grout
- Test methods
Part 1: Reference concrete and reference
mortar for testing
Part 2: Determination of setting time
Part 4: Determination of bleeding of concrete
Part 5: Determination of capillary absorption
Part 6: Infrared analysis
Part 8: Determination of the conventional dry
material content
Part 10: Determination of water soluble
chloride content
Part 11: Determination of air void
characteristics in hardened concrete
Part 12: Determination of the alkali content of
admixtures
Part 13: Reference masonry mortar for testing
mortar admixtures
FRESH CONCRETE
EN 12350: Testing of fresh concrete
Part 1: Sampling
Part 2: Slump test
Part 3: Vebe test
Part 4: Degree of compactability
Part 5: Flow table test
Part 6: Density
Part 7: Air content - Pressure methods
Part 8: S.C.C. - Slump-Flow test
HARDENED CONCRETE
EN 12390: Testing of hardened concrete
Part 1: Shape, dimensions, and other requirements
for specimens and molds
Part 2: Making and curing specimens for strength
tests
Part 3: Compressive strength of test specimens
Part 4: Compressive strength - Specification for
testing machines
Part 5: Flexural strength of test specimens
Part 6: Tensile splitting strength of test specimens
Part 7: Density of hardened concrete
Part 8: Depth of penetration of water under pressure
Part 9: Freeze-Thaw Resistance - Scaling
5. FLY ASH / GGBS
EN 450: Fly ash for concrete
Part 1: Definition, specifications, and
conformity criteria
Part 2: Conformity evaluation
EN 15167: Ground granulated blast furnace slag for
use in concrete, mortar, and grout - Part 1:
Definition, specifications, and conformity criteria
